linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org,
	linux-rpi-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Phil Elwell <phil@raspberrypi.com>,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH 52/89] drm/vc4: crtc: Assign output to channel automatically
Date: Mon, 24 Feb 2020 10:06:54 +0100	[thread overview]
Message-ID: <44e23fcd29c480ee5413c92ee650fb6edc7f200c.1582533919.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.6c896ace9a5a7840e9cec008b553cbb004ca1f91.1582533919.git-series.maxime@cerno.tech>

The HVS found in the BCM2711 has 6 outputs and 3 FIFOs, with each output
being connected to a pixelvalve, and some muxing between the FIFOs and
outputs.

Any output cannot feed from any FIFO though, and they all have a bunch of
constraints.

In order to support this, let's store the possible FIFOs each output can be
assigned to in the vc4_crtc_data, and use that information at atomic_check
time to iterate over all the CRTCs enabled and assign them FIFOs.

The channel assigned is then set in the vc4_crtc_state so that the rest of
the driver can use it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_crtc.c |  37 +++++----
 drivers/gpu/drm/vc4/vc4_drv.h  |   7 +-
 drivers/gpu/drm/vc4/vc4_kms.c  | 143 ++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/vc4/vc4_regs.h |  10 ++-
 4 files changed, 173 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 25add62080a1..f8e4b2971510 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -90,6 +90,7 @@ bool vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct drm_crtc *crtc = drm_crtc_from_index(dev, crtc_id);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(crtc->state);
 	unsigned int cob_size;
 	u32 val;
 	int fifo_lines;
@@ -106,7 +107,7 @@ bool vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 	 * Read vertical scanline which is currently composed for our
 	 * pixelvalve by the HVS, and also the scaler status.
 	 */
-	val = HVS_READ(SCALER_DISPSTATX(vc4_crtc->channel));
+	val = HVS_READ(SCALER_DISPSTATX(vc4_crtc_state->assigned_channel));
 
 	/* Get optional system timestamp after query. */
 	if (etime)
@@ -126,7 +127,7 @@ bool vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 			*hpos += mode->crtc_htotal / 2;
 	}
 
-	cob_size = vc4_crtc_get_cob_allocation(vc4_crtc, vc4_crtc->channel);
+	cob_size = vc4_crtc_get_cob_allocation(vc4_crtc, vc4_crtc_state->assigned_channel);
 	/* This is the offset we need for translating hvs -> pv scanout pos. */
 	fifo_lines = cob_size / mode->crtc_hdisplay;
 
@@ -213,6 +214,7 @@ vc4_crtc_lut_load(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(crtc->state);
 	u32 i;
 
 	/* The LUT memory is laid out with each HVS channel in order,
@@ -221,7 +223,7 @@ vc4_crtc_lut_load(struct drm_crtc *crtc)
 	 */
 	HVS_WRITE(SCALER_GAMADDR,
 		  SCALER_GAMADDR_AUTOINC |
-		  (vc4_crtc->channel * 3 * crtc->gamma_size));
+		  (vc4_crtc_state->assigned_channel * 3 * crtc->gamma_size));
 
 	for (i = 0; i < crtc->gamma_size; i++)
 		HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_r[i]);
@@ -394,7 +396,7 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 		drm_print_regset32(&p, &vc4_crtc->regset);
 	}
 
-	if (vc4_crtc->channel == 2) {
+	if (vc4_crtc->data->hvs_output == 2) {
 		u32 dispctrl;
 		u32 dsp3_mux;
 
@@ -421,7 +423,7 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 	if (!vc4_state->feed_txp)
 		vc4_crtc_config_pv(crtc);
 
-	HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
+	HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel),
 		  SCALER_DISPBKGND_AUTOHS |
 		  SCALER_DISPBKGND_GAMMA |
 		  (interlace ? SCALER_DISPBKGND_INTERLACE : 0));
@@ -453,7 +455,8 @@ static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
-	u32 chan = vc4_crtc->channel;
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(old_state);
+	u32 chan = vc4_crtc_state->assigned_channel;
 	int ret;
 	require_hvs_enabled(dev);
 
@@ -532,12 +535,12 @@ static void vc4_crtc_update_dlist(struct drm_crtc *crtc)
 			crtc->state->event = NULL;
 		}
 
-		HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+		HVS_WRITE(SCALER_DISPLISTX(vc4_state->assigned_channel),
 			  vc4_state->mm.start);
 
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 	} else {
-		HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+		HVS_WRITE(SCALER_DISPLISTX(vc4_state->assigned_channel),
 			  vc4_state->mm.start);
 	}
 }
@@ -586,7 +589,7 @@ static void vc4_crtc_atomic_enable(struct drm_crtc *crtc,
 			    (vc4_state->feed_txp ?
 					SCALER5_DISPCTRLX_ONESHOT : 0);
 
-	HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc->channel), dispctrl);
+	HVS_WRITE(SCALER_DISPCTRLX(vc4_state->assigned_channel), dispctrl);
 
 	/* When feeding the transposer block the pixelvalve is unneeded and
 	 * should not be enabled.
@@ -702,7 +705,6 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 {
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
-	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
 	struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
 	struct drm_plane *plane;
 	struct vc4_plane_state *vc4_plane_state;
@@ -744,8 +746,8 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 		/* This sets a black background color fill, as is the case
 		 * with other DRM drivers.
 		 */
-		HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
-			  HVS_READ(SCALER_DISPBKGNDX(vc4_crtc->channel)) |
+		HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel),
+			  HVS_READ(SCALER_DISPBKGNDX(vc4_state->assigned_channel)) |
 			  SCALER_DISPBKGND_FILL);
 
 	/* Only update DISPLIST if the CRTC was already running and is not
@@ -759,7 +761,7 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 		vc4_crtc_update_dlist(crtc);
 
 	if (crtc->state->color_mgmt_changed) {
-		u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(vc4_crtc->channel));
+		u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(vc4_state->assigned_channel));
 
 		if (crtc->state->gamma_lut) {
 			vc4_crtc_update_gamma_lut(crtc);
@@ -771,7 +773,7 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 			 */
 			dispbkgndx &= ~SCALER_DISPBKGND_GAMMA;
 		}
-		HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel), dispbkgndx);
+		HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel), dispbkgndx);
 	}
 
 	if (debug_dump_regs) {
@@ -802,7 +804,7 @@ static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc)
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
-	u32 chan = vc4_crtc->channel;
+	u32 chan = vc4_state->assigned_channel;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->event_lock, flags);
@@ -1001,6 +1003,7 @@ static struct drm_crtc_state *vc4_crtc_duplicate_state(struct drm_crtc *crtc)
 	old_vc4_state = to_vc4_crtc_state(crtc->state);
 	vc4_state->feed_txp = old_vc4_state->feed_txp;
 	vc4_state->margins = old_vc4_state->margins;
+	vc4_state->assigned_channel = old_vc4_state->assigned_channel;
 
 	__drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base);
 	return &vc4_state->base;
@@ -1060,6 +1063,7 @@ static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv0_data = {
+	.hvs_available_channels = BIT(0),
 	.hvs_output = 0,
 	.debugfs_name = "crtc0_regs",
 	.pixels_per_clock = 1,
@@ -1070,6 +1074,7 @@ static const struct vc4_crtc_data bcm2835_pv0_data = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv1_data = {
+	.hvs_available_channels = BIT(2),
 	.hvs_output = 2,
 	.debugfs_name = "crtc1_regs",
 	.pixels_per_clock = 1,
@@ -1080,6 +1085,7 @@ static const struct vc4_crtc_data bcm2835_pv1_data = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv2_data = {
+	.hvs_available_channels = BIT(1),
 	.hvs_output = 1,
 	.debugfs_name = "crtc2_regs",
 	.pixels_per_clock = 1,
@@ -1171,7 +1177,6 @@ static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
 	drm_crtc_init_with_planes(drm, crtc, primary_plane, NULL,
 				  &vc4_crtc_funcs, NULL);
 	drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs);
-	vc4_crtc->channel = vc4_crtc->data->hvs_output;
 	drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r));
 	drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size);
 
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index e1cb7a16f475..f31a6593da8a 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -448,6 +448,9 @@ to_vc4_encoder(struct drm_encoder *encoder)
 }
 
 struct vc4_crtc_data {
+	/* Which channels of the HVS can the output source from */
+	unsigned int hvs_available_channels;
+
 	/* Which output of the HVS this pixelvalve sources from. */
 	int hvs_output;
 
@@ -467,9 +470,6 @@ struct vc4_crtc {
 	/* Timestamp at start of vblank irq - unaffected by lock delays. */
 	ktime_t t_vblank;
 
-	/* Which HVS channel we're using for our CRTC. */
-	int channel;
-
 	u8 lut_r[256];
 	u8 lut_g[256];
 	u8 lut_b[256];
@@ -491,6 +491,7 @@ struct vc4_crtc_state {
 	struct drm_mm_node mm;
 	bool feed_txp;
 	bool txp_armed;
+	unsigned int assigned_channel;
 
 	struct {
 		unsigned int left;
diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index 71e7211a5fb9..bdcd851450da 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -11,6 +11,9 @@
  * crtc, HDMI encoder).
  */
 
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
@@ -144,6 +147,72 @@ vc4_ctm_commit(struct vc4_dev *vc4, struct drm_atomic_state *state)
 		  VC4_SET_FIELD(ctm_state->fifo, SCALER_OLEDOFFS_DISPFIFO));
 }
 
+static void vc4_hvs_pv_muxing_commit(struct vc4_dev *vc4,
+				     struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+	unsigned char dsp2_mux = 0;
+	unsigned char dsp3_mux = 3;
+	unsigned char dsp4_mux = 3;
+	unsigned char dsp5_mux = 3;
+	unsigned int i;
+	u32 reg;
+
+	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+		struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state);
+		struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+
+		if (!crtc_state->active)
+			continue;
+
+		switch (vc4_crtc->data->hvs_output) {
+		case 2:
+			dsp2_mux = (vc4_state->assigned_channel == 2) ? 1 : 0;
+			break;
+
+		case 3:
+			dsp3_mux = vc4_state->assigned_channel;
+			break;
+
+		case 4:
+			dsp4_mux = vc4_state->assigned_channel;
+			break;
+
+		case 5:
+			dsp5_mux = vc4_state->assigned_channel;
+			break;
+
+		default:
+			break;
+		}
+	}
+
+	reg = HVS_READ(SCALER_DISPECTRL);
+	if (FIELD_GET(SCALER_DISPECTRL_DSP2_MUX_MASK, reg) != dsp2_mux)
+		HVS_WRITE(SCALER_DISPECTRL,
+			  (reg & ~SCALER_DISPECTRL_DSP2_MUX_MASK) |
+			  VC4_SET_FIELD(dsp2_mux, SCALER_DISPECTRL_DSP2_MUX));
+
+	reg = HVS_READ(SCALER_DISPCTRL);
+	if (FIELD_GET(SCALER_DISPCTRL_DSP3_MUX_MASK, reg) != dsp3_mux)
+		HVS_WRITE(SCALER_DISPCTRL,
+			  (reg & ~SCALER_DISPCTRL_DSP3_MUX_MASK) |
+			  VC4_SET_FIELD(dsp3_mux, SCALER_DISPCTRL_DSP3_MUX));
+
+	reg = HVS_READ(SCALER_DISPEOLN);
+	if (FIELD_GET(SCALER_DISPEOLN_DSP4_MUX_MASK, reg) != dsp4_mux)
+		HVS_WRITE(SCALER_DISPEOLN,
+			  (reg & ~SCALER_DISPEOLN_DSP4_MUX_MASK) |
+			  VC4_SET_FIELD(dsp4_mux, SCALER_DISPEOLN_DSP4_MUX));
+
+	reg = HVS_READ(SCALER_DISPDITHER);
+	if (FIELD_GET(SCALER_DISPDITHER_DSP5_MUX_MASK, reg) != dsp5_mux)
+		HVS_WRITE(SCALER_DISPDITHER,
+			  (reg & ~SCALER_DISPDITHER_DSP5_MUX_MASK) |
+			  VC4_SET_FIELD(dsp5_mux, SCALER_DISPDITHER_DSP5_MUX));
+}
+
 static void
 vc4_atomic_complete_commit(struct drm_atomic_state *state)
 {
@@ -153,11 +222,15 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
 	int i;
 
 	for (i = 0; i < dev->mode_config.num_crtc; i++) {
-		if (!state->crtcs[i].ptr || !state->crtcs[i].commit)
+		struct __drm_crtcs_state *_state = &state->crtcs[i];
+		struct vc4_crtc_state *vc4_crtc_state;
+
+		if (!_state->ptr || !_state->commit)
 			continue;
 
-		vc4_crtc = to_vc4_crtc(state->crtcs[i].ptr);
-		vc4_hvs_mask_underrun(dev, vc4_crtc->channel);
+		vc4_crtc = to_vc4_crtc(_state->ptr);
+		vc4_crtc_state = to_vc4_crtc_state(_state->state);
+		vc4_hvs_mask_underrun(dev, vc4_crtc_state->assigned_channel);
 	}
 
 	drm_atomic_helper_wait_for_fences(dev, state, false);
@@ -167,6 +240,7 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
 	drm_atomic_helper_commit_modeset_disables(dev, state);
 
 	vc4_ctm_commit(vc4, state);
+	vc4_hvs_pv_muxing_commit(vc4, state);
 
 	drm_atomic_helper_commit_planes(dev, state, 0);
 
@@ -374,8 +448,11 @@ vc4_ctm_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
 
 		/* CTM is being enabled or the matrix changed. */
 		if (new_crtc_state->ctm) {
+			struct vc4_crtc_state *vc4_crtc_state =
+				to_vc4_crtc_state(new_crtc_state);
+
 			/* fifo is 1-based since 0 disables CTM. */
-			int fifo = to_vc4_crtc(crtc)->channel + 1;
+			int fifo = vc4_crtc_state->assigned_channel + 1;
 
 			/* Check userland isn't trying to turn on CTM for more
 			 * than one CRTC at a time.
@@ -488,10 +565,66 @@ static const struct drm_private_state_funcs vc4_load_tracker_state_funcs = {
 	.atomic_destroy_state = vc4_load_tracker_destroy_state,
 };
 
+#define NUM_OUTPUTS  6
+#define NUM_CHANNELS 3
+
 static int
 vc4_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
 {
-	int ret;
+	unsigned long unassigned_channels = GENMASK(NUM_CHANNELS - 1, 0);
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+	int i, ret;
+
+	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+		struct vc4_crtc_state *vc4_crtc_state =
+			to_vc4_crtc_state(crtc_state);
+		struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+		bool is_assigned = false;
+		unsigned int channel;
+
+		if (!crtc_state->active)
+			continue;
+
+		/*
+		 * The problem we have to solve here is that we have
+		 * up to 7 encoders, connected to up to 6 CRTCs.
+		 *
+		 * Those CRTCs, depending on the instance, can be
+		 * routed to 1, 2 or 3 HVS FIFOs, and we need to set
+		 * the change the muxing between FIFOs and outputs in
+		 * the HVS accordingly.
+		 *
+		 * It would be pretty hard to come up with an
+		 * algorithm that would generically solve
+		 * this. However, the current routing trees we support
+		 * allow us to simplify a bit the problem.
+		 *
+		 * Indeed, with the current supported layouts, if we
+		 * try to assign in the ascending crtc index order the
+		 * FIFOs, we can't fall into the situation where an
+		 * earlier CRTC that had multiple routes is assigned
+		 * one that was the only option for a later CRTC.
+		 *
+		 * If the layout changes and doesn't give us that in
+		 * the future, we will need to have something smarter,
+		 * but it works so far.
+		 */
+		for_each_set_bit(channel, &unassigned_channels,
+				 sizeof(unassigned_channels)) {
+
+			if (!(BIT(channel) & vc4_crtc->data->hvs_available_channels))
+				continue;
+
+			vc4_crtc_state->assigned_channel = channel;
+			unassigned_channels &= ~BIT(channel);
+			is_assigned = true;
+			break;
+		}
+
+		if (!is_assigned)
+			return -EINVAL;
+	}
 
 	ret = vc4_ctm_atomic_check(dev, state);
 	if (ret < 0)
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 8a51baf681fe..b96ebbb1354b 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -287,9 +287,19 @@
 
 #define SCALER_DISPID                           0x00000008
 #define SCALER_DISPECTRL                        0x0000000c
+# define SCALER_DISPECTRL_DSP2_MUX_SHIFT	31
+# define SCALER_DISPECTRL_DSP2_MUX_MASK		VC4_MASK(31, 31)
+
 #define SCALER_DISPPROF                         0x00000010
+
 #define SCALER_DISPDITHER                       0x00000014
+# define SCALER_DISPDITHER_DSP5_MUX_SHIFT	30
+# define SCALER_DISPDITHER_DSP5_MUX_MASK	VC4_MASK(31, 30)
+
 #define SCALER_DISPEOLN                         0x00000018
+# define SCALER_DISPEOLN_DSP4_MUX_SHIFT		30
+# define SCALER_DISPEOLN_DSP4_MUX_MASK		VC4_MASK(31, 30)
+
 #define SCALER_DISPLIST0                        0x00000020
 #define SCALER_DISPLIST1                        0x00000024
 #define SCALER_DISPLIST2                        0x00000028
-- 
git-series 0.9.1

  parent reply	other threads:[~2020-02-24  9:10 UTC|newest]

Thread overview: 161+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-24  9:06 [PATCH 00/89] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-02-24  9:06 ` [PATCH 01/89] dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema Maxime Ripard
2020-02-24 17:40   ` Florian Fainelli
2020-02-25 18:14   ` Rob Herring
2020-03-10 10:07   ` Wolfram Sang
2020-03-10 10:07   ` Wolfram Sang
2020-02-24  9:06 ` [PATCH 02/89] dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding Maxime Ripard
2020-02-24 17:48   ` Florian Fainelli
2020-02-25 18:15   ` Rob Herring
2020-03-10 10:07   ` Wolfram Sang
2020-02-24  9:06 ` [PATCH 03/89] i2c: brcmstb: Support BCM2711 HDMI BSC controllers Maxime Ripard
2020-02-24 17:44   ` Florian Fainelli
2020-03-10 10:12   ` Wolfram Sang
2020-02-24  9:06 ` [PATCH 04/89] i2c: brcmstb: Allow to compile it on BCM2835 Maxime Ripard
2020-02-24 17:39   ` Florian Fainelli
2020-03-10 10:16   ` Wolfram Sang
2020-02-24  9:06 ` [PATCH 05/89] clk: Return error code when of provider pointer is NULL Maxime Ripard
2020-03-12 23:13   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 06/89] dt-bindings: clock: Add a binding for the RPi Firmware clocks Maxime Ripard
2020-02-25 18:16   ` Rob Herring
2020-03-12 23:14     ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 07/89] clk: bcm: rpi: Allow the driver to be probed by DT Maxime Ripard
2020-02-25 16:00   ` Nicolas Saenz Julienne
2020-02-26 15:01     ` Maxime Ripard
2020-02-28 19:57       ` Nicolas Saenz Julienne
2020-03-01 12:16   ` Stefan Wahren
2020-03-23 15:13     ` Maxime Ripard
2020-02-24  9:06 ` [PATCH 08/89] clk: bcm: rpi: Statically init clk_init_data Maxime Ripard
2020-02-25 16:05   ` Nicolas Saenz Julienne
2020-02-24  9:06 ` [PATCH 09/89] clk: bcm: rpi: Use clk_hw_register for pllb_arm Maxime Ripard
2020-02-25 16:11   ` Nicolas Saenz Julienne
2020-03-12 23:17   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 10/89] clk: bcm: rpi: Remove global pllb_arm clock pointer Maxime Ripard
2020-02-25 16:13   ` Nicolas Saenz Julienne
2020-02-26 14:26     ` Maxime Ripard
2020-02-26 14:57       ` Nicolas Saenz Julienne
2020-02-24  9:06 ` [PATCH 11/89] clk: bcm: rpi: Make sure pllb_arm is removed Maxime Ripard
2020-02-25 16:14   ` Nicolas Saenz Julienne
2020-03-12 23:20   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 12/89] clk: bcm: rpi: Remove pllb_arm_lookup global pointer Maxime Ripard
2020-02-25 16:16   ` Nicolas Saenz Julienne
2020-03-12 23:21   ` Stephen Boyd
2020-03-13  1:13   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 13/89] clk: bcm: rpi: Switch to clk_hw_register_clkdev Maxime Ripard
2020-02-25 16:17   ` Nicolas Saenz Julienne
2020-03-13  1:12   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 14/89] clk: bcm: rpi: Make sure the clkdev lookup is removed Maxime Ripard
2020-02-25 16:19   ` Nicolas Saenz Julienne
2020-03-13  1:11   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 15/89] clk: bcm: rpi: Create a data structure for the clocks Maxime Ripard
2020-02-25 16:24   ` Nicolas Saenz Julienne
2020-03-13  1:11   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 16/89] clk: bcm: rpi: Add clock id to data Maxime Ripard
2020-02-24 19:25   ` Stefan Wahren
2020-02-25  9:54     ` Maxime Ripard
2020-02-25 14:33       ` Nicolas Saenz Julienne
2020-02-25 16:24   ` Nicolas Saenz Julienne
2020-03-13  1:11   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 17/89] clk: bcm: rpi: Pass the clocks data to the firmware function Maxime Ripard
2020-02-25 16:26   ` Nicolas Saenz Julienne
2020-03-13  1:09   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 18/89] clk: bcm: rpi: Rename is_prepared function Maxime Ripard
2020-02-25 16:45   ` Nicolas Saenz Julienne
2020-03-13  1:09   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 19/89] clk: bcm: rpi: Split pllb clock hooks Maxime Ripard
2020-03-13  1:08   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 20/89] clk: bcm: rpi: Make the PLLB registration function return a clk_hw Maxime Ripard
2020-03-13  1:01   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 21/89] clk: bcm: rpi: Add DT provider for the clocks Maxime Ripard
2020-03-13  1:01   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 22/89] clk: bcm: rpi: Discover the firmware clocks Maxime Ripard
2020-02-24 16:47   ` kbuild test robot
2020-02-24 16:47   ` [PATCH] clk: bcm: rpi: fix noderef.cocci warnings kbuild test robot
2020-02-24 18:15   ` [PATCH 22/89] clk: bcm: rpi: Discover the firmware clocks Florian Fainelli
2020-02-26 14:15     ` Maxime Ripard
2020-02-24 20:24   ` kbuild test robot
2020-03-13  1:08   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 23/89] ARM: dts: bcm2711: Add firmware clocks node Maxime Ripard
2020-02-24  9:06 ` [PATCH 24/89] reset: Move reset-simple header out of drivers/reset Maxime Ripard
2020-02-24  9:06 ` [PATCH 25/89] reset: simple: Add reset callback Maxime Ripard
2020-03-04 12:03   ` Philipp Zabel
2020-02-24  9:06 ` [PATCH 26/89] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-02-25 18:17   ` Rob Herring
2020-02-24  9:06 ` [PATCH 27/89] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-03-13  1:00   ` Stephen Boyd
2020-03-23 10:56     ` Maxime Ripard
2020-03-25  2:20       ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 28/89] ARM: dts: bcm2711: Add HDMI DVP Maxime Ripard
2020-02-24  9:06 ` [PATCH 29/89] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-02-24 18:41   ` Rob Herring
2020-02-25 11:54     ` Maxime Ripard
2020-02-25 14:02       ` Rob Herring
2020-02-24  9:06 ` [PATCH 30/89] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-02-25 18:17   ` Rob Herring
2020-02-24  9:06 ` [PATCH 31/89] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-02-25 18:18   ` Rob Herring
2020-02-24  9:06 ` [PATCH 32/89] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-02-25 18:18   ` Rob Herring
2020-02-24  9:06 ` [PATCH 33/89] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-02-25 18:18   ` Rob Herring
2020-02-24  9:06 ` [PATCH 34/89] drm/vc4: drv: Add include guards Maxime Ripard
2020-02-24  9:06 ` [PATCH 35/89] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-02-24  9:06 ` [PATCH 36/89] drm/vc4: drv: Add support for the BCM2711 HVS5 Maxime Ripard
2020-02-24  9:06 ` [PATCH 37/89] drm/vc4: plane: Improve LBM usage Maxime Ripard
2020-02-24  9:06 ` [PATCH 38/89] drm/vc4: plane: Move planes creation to its own function Maxime Ripard
2020-02-24  9:06 ` [PATCH 39/89] drm/vc4: plane: Move additional planes creation to driver Maxime Ripard
2020-02-24  9:06 ` [PATCH 40/89] drm/vc4: plane: Register all the planes at once Maxime Ripard
2020-02-24  9:06 ` [PATCH 41/89] drm/vc4: plane: Create overlays for any CRTC Maxime Ripard
2020-02-24  9:06 ` [PATCH 42/89] drm/vc4: plane: Create more planes Maxime Ripard
2020-02-24  9:06 ` [PATCH 43/89] drm/vc4: crtc: Rename SoC data structures Maxime Ripard
2020-02-24  9:06 ` [PATCH 44/89] drm/vc4: crtc: Move crtc state to common header Maxime Ripard
2020-02-24  9:06 ` [PATCH 45/89] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-02-24  9:06 ` [PATCH 46/89] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-02-24  9:06 ` [PATCH 47/89] drm/vc4: crtc: Turn static const variable into a define Maxime Ripard
2020-02-24  9:06 ` [PATCH 48/89] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-02-24  9:06 ` [PATCH 49/89] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-02-24  9:06 ` [PATCH 50/89] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-02-24  9:06 ` [PATCH 51/89] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-02-24  9:06 ` Maxime Ripard [this message]
2020-02-24  9:06 ` [PATCH 53/89] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-02-24  9:06 ` [PATCH 54/89] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-02-24  9:06 ` [PATCH 55/89] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-02-24  9:06 ` [PATCH 56/89] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-02-24  9:06 ` [PATCH 57/89] drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt Maxime Ripard
2020-02-24  9:07 ` [PATCH 58/89] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-02-24  9:07 ` [PATCH 59/89] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-02-25 18:19   ` Rob Herring
2020-02-24  9:07 ` [PATCH 60/89] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-02-24  9:07 ` [PATCH 61/89] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-02-24  9:07 ` [PATCH 62/89] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-02-24  9:07 ` [PATCH 63/89] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-02-24  9:07 ` [PATCH 64/89] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-02-24  9:07 ` [PATCH 65/89] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-02-24  9:07 ` [PATCH 66/89] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-02-24  9:07 ` [PATCH 67/89] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-02-24  9:07 ` [PATCH 68/89] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-02-24  9:07 ` [PATCH 69/89] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-02-24  9:07 ` [PATCH 70/89] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-02-24  9:07 ` [PATCH 71/89] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-02-24  9:07 ` [PATCH 72/89] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-02-24  9:07 ` [PATCH 73/89] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-02-24  9:07 ` [PATCH 74/89] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-02-24  9:07 ` [PATCH 75/89] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-02-24  9:07 ` [PATCH 76/89] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-02-24  9:07 ` [PATCH 77/89] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-02-24  9:07 ` [PATCH 78/89] drm/vc4: hdmi: Add a set_timings callback Maxime Ripard
2020-02-24  9:07 ` [PATCH 79/89] drm/vc4: hdmi: Add HDMI ID Maxime Ripard
2020-02-24  9:07 ` [PATCH 80/89] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-02-24  9:07 ` [PATCH 81/89] drm/vc4: hdmi: Add an audio support flag Maxime Ripard
2020-02-24  9:07 ` [PATCH 82/89] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-02-24  9:07 ` [PATCH 83/89] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-02-24  9:07 ` [PATCH 84/89] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-02-24  9:07 ` [PATCH 85/89] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-02-24  9:07 ` [PATCH 86/89] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-03-16 12:54   ` Nicolas Saenz Julienne
2020-02-24  9:07 ` [PATCH 87/89] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-03-17 18:25   ` Daniel Rodriguez
2020-02-24  9:07 ` [PATCH 88/89] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-02-25 18:24   ` Rob Herring
2020-02-24  9:07 ` [PATCH 89/89] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-03-05 10:00 ` [PATCH 70/89] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Jian-Hong Pan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=44e23fcd29c480ee5413c92ee650fb6edc7f200c.1582533919.git-series.maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=nsaenzjulienne@suse.de \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).