* [PATCH v2] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems
@ 2021-03-05 5:41 Aswath Govindraju
2021-03-09 16:03 ` Kishon Vijay Abraham I
2021-03-11 14:16 ` Nishanth Menon
0 siblings, 2 replies; 3+ messages in thread
From: Aswath Govindraju @ 2021-03-05 5:41 UTC (permalink / raw)
Cc: Vignesh Raghavendra, Lokesh Vutla, Kishon Vijay Abraham I,
Aswath Govindraju, Nishanth Menon, Tero Kristo, Rob Herring,
Sekhar Nori, Faiz Abbas, linux-arm-kernel, devicetree,
linux-kernel
According to latest errata of J721e [1], HS400 mode is not supported
in MMCSD0 subsystem (i2024) and SDR104 mode is not supported in MMCSD1/2
subsystems (i2090). Therefore, replace mmc-hs400-1_8v with mmc-hs200-1_8v
in MMCSD0 subsystem and add a sdhci mask to disable SDR104 speed mode.
Also, update the itap delay values for all the MMCSD subsystems according
the latest J721e data sheet[2]
[1] - https://www.ti.com/lit/er/sprz455/sprz455.pdf
[2] - https://www.ti.com/lit/ds/symlink/tda4vm.pdf
Fixes: cd48ce86a4d0 ("arm64: dts: ti: k3-j721e-common-proc-board: Add support for SD card UHS modes")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
Changes since v1:
- Corrected the fixes tag to latest commit that makes changes to the
sdhci DT nodes.
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 8c84dafb7125..f1e7da3dfa27 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1042,13 +1042,16 @@
assigned-clocks = <&k3_clks 91 1>;
assigned-clock-parents = <&k3_clks 91 2>;
bus-width = <8>;
- mmc-hs400-1_8v;
+ mmc-hs200-1_8v;
mmc-ddr-1_8v;
ti,otap-del-sel-legacy = <0xf>;
ti,otap-del-sel-mmc-hs = <0xf>;
ti,otap-del-sel-ddr52 = <0x5>;
ti,otap-del-sel-hs200 = <0x6>;
ti,otap-del-sel-hs400 = <0x0>;
+ ti,itap-del-sel-legacy = <0x10>;
+ ti,itap-del-sel-mmc-hs = <0xa>;
+ ti,itap-del-sel-ddr52 = <0x3>;
ti,trm-icp = <0x8>;
ti,strobe-sel = <0x77>;
dma-coherent;
@@ -1069,9 +1072,15 @@
ti,otap-del-sel-sdr25 = <0xf>;
ti,otap-del-sel-sdr50 = <0xc>;
ti,otap-del-sel-ddr50 = <0xc>;
+ ti,itap-del-sel-legacy = <0x0>;
+ ti,itap-del-sel-sd-hs = <0x0>;
+ ti,itap-del-sel-sdr12 = <0x0>;
+ ti,itap-del-sel-sdr25 = <0x0>;
+ ti,itap-del-sel-ddr50 = <0x2>;
ti,trm-icp = <0x8>;
ti,clkbuf-sel = <0x7>;
dma-coherent;
+ sdhci-caps-mask = <0x2 0x0>;
};
main_sdhci2: mmc@4f98000 {
@@ -1089,9 +1098,15 @@
ti,otap-del-sel-sdr25 = <0xf>;
ti,otap-del-sel-sdr50 = <0xc>;
ti,otap-del-sel-ddr50 = <0xc>;
+ ti,itap-del-sel-legacy = <0x0>;
+ ti,itap-del-sel-sd-hs = <0x0>;
+ ti,itap-del-sel-sdr12 = <0x0>;
+ ti,itap-del-sel-sdr25 = <0x0>;
+ ti,itap-del-sel-ddr50 = <0x2>;
ti,trm-icp = <0x8>;
ti,clkbuf-sel = <0x7>;
dma-coherent;
+ sdhci-caps-mask = <0x2 0x0>;
};
usbss0: cdns-usb@4104000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems
2021-03-05 5:41 [PATCH v2] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems Aswath Govindraju
@ 2021-03-09 16:03 ` Kishon Vijay Abraham I
2021-03-11 14:16 ` Nishanth Menon
1 sibling, 0 replies; 3+ messages in thread
From: Kishon Vijay Abraham I @ 2021-03-09 16:03 UTC (permalink / raw)
To: Aswath Govindraju
Cc: Vignesh Raghavendra, Lokesh Vutla, Nishanth Menon, Tero Kristo,
Rob Herring, Sekhar Nori, Faiz Abbas, linux-arm-kernel,
devicetree, linux-kernel
On 05/03/21 11:11 am, Aswath Govindraju wrote:
> According to latest errata of J721e [1], HS400 mode is not supported
> in MMCSD0 subsystem (i2024) and SDR104 mode is not supported in MMCSD1/2
> subsystems (i2090). Therefore, replace mmc-hs400-1_8v with mmc-hs200-1_8v
> in MMCSD0 subsystem and add a sdhci mask to disable SDR104 speed mode.
>
> Also, update the itap delay values for all the MMCSD subsystems according
> the latest J721e data sheet[2]
>
> [1] - https://www.ti.com/lit/er/sprz455/sprz455.pdf
> [2] - https://www.ti.com/lit/ds/symlink/tda4vm.pdf
>
> Fixes: cd48ce86a4d0 ("arm64: dts: ti: k3-j721e-common-proc-board: Add support for SD card UHS modes")
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>
> Changes since v1:
> - Corrected the fixes tag to latest commit that makes changes to the
> sdhci DT nodes.
>
> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> index 8c84dafb7125..f1e7da3dfa27 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> @@ -1042,13 +1042,16 @@
> assigned-clocks = <&k3_clks 91 1>;
> assigned-clock-parents = <&k3_clks 91 2>;
> bus-width = <8>;
> - mmc-hs400-1_8v;
> + mmc-hs200-1_8v;
> mmc-ddr-1_8v;
> ti,otap-del-sel-legacy = <0xf>;
> ti,otap-del-sel-mmc-hs = <0xf>;
> ti,otap-del-sel-ddr52 = <0x5>;
> ti,otap-del-sel-hs200 = <0x6>;
> ti,otap-del-sel-hs400 = <0x0>;
> + ti,itap-del-sel-legacy = <0x10>;
> + ti,itap-del-sel-mmc-hs = <0xa>;
> + ti,itap-del-sel-ddr52 = <0x3>;
> ti,trm-icp = <0x8>;
> ti,strobe-sel = <0x77>;
> dma-coherent;
> @@ -1069,9 +1072,15 @@
> ti,otap-del-sel-sdr25 = <0xf>;
> ti,otap-del-sel-sdr50 = <0xc>;
> ti,otap-del-sel-ddr50 = <0xc>;
> + ti,itap-del-sel-legacy = <0x0>;
> + ti,itap-del-sel-sd-hs = <0x0>;
> + ti,itap-del-sel-sdr12 = <0x0>;
> + ti,itap-del-sel-sdr25 = <0x0>;
> + ti,itap-del-sel-ddr50 = <0x2>;
> ti,trm-icp = <0x8>;
> ti,clkbuf-sel = <0x7>;
> dma-coherent;
> + sdhci-caps-mask = <0x2 0x0>;
> };
>
> main_sdhci2: mmc@4f98000 {
> @@ -1089,9 +1098,15 @@
> ti,otap-del-sel-sdr25 = <0xf>;
> ti,otap-del-sel-sdr50 = <0xc>;
> ti,otap-del-sel-ddr50 = <0xc>;
> + ti,itap-del-sel-legacy = <0x0>;
> + ti,itap-del-sel-sd-hs = <0x0>;
> + ti,itap-del-sel-sdr12 = <0x0>;
> + ti,itap-del-sel-sdr25 = <0x0>;
> + ti,itap-del-sel-ddr50 = <0x2>;
> ti,trm-icp = <0x8>;
> ti,clkbuf-sel = <0x7>;
> dma-coherent;
> + sdhci-caps-mask = <0x2 0x0>;
> };
>
> usbss0: cdns-usb@4104000 {
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems
2021-03-05 5:41 [PATCH v2] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems Aswath Govindraju
2021-03-09 16:03 ` Kishon Vijay Abraham I
@ 2021-03-11 14:16 ` Nishanth Menon
1 sibling, 0 replies; 3+ messages in thread
From: Nishanth Menon @ 2021-03-11 14:16 UTC (permalink / raw)
To: Aswath Govindraju
Cc: Nishanth Menon, Kishon Vijay Abraham I, linux-kernel,
Vignesh Raghavendra, Lokesh Vutla, Tero Kristo, linux-arm-kernel,
Faiz Abbas, devicetree, Rob Herring, Sekhar Nori
On Fri, 5 Mar 2021 11:11:04 +0530, Aswath Govindraju wrote:
> According to latest errata of J721e [1], HS400 mode is not supported
> in MMCSD0 subsystem (i2024) and SDR104 mode is not supported in MMCSD1/2
> subsystems (i2090). Therefore, replace mmc-hs400-1_8v with mmc-hs200-1_8v
> in MMCSD0 subsystem and add a sdhci mask to disable SDR104 speed mode.
>
> Also, update the itap delay values for all the MMCSD subsystems according
> the latest J721e data sheet[2]
>
> [...]
Hi Aswath Govindraju,
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/1] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems
commit: eb8f6194e8074d7b00642dd75cf04d13e1b218e4
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D)/Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-03-11 14:16 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-05 5:41 [PATCH v2] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems Aswath Govindraju
2021-03-09 16:03 ` Kishon Vijay Abraham I
2021-03-11 14:16 ` Nishanth Menon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).