linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Johan Hovold <johan+linaro@kernel.org>, Vinod Koul <vkoul@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@somainline.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 08/15] phy: qcom-qmp-pcie: add register init helper
Date: Wed, 19 Oct 2022 16:12:02 +0300	[thread overview]
Message-ID: <0f1fff20-772f-c4d1-f803-f1824ef23780@linaro.org> (raw)
In-Reply-To: <20221019113552.22353-9-johan+linaro@kernel.org>

On 19/10/2022 14:35, Johan Hovold wrote:
> Generalise the serdes initialisation helper so that it can be used to
> initialise all the PHY registers (e.g. serdes, tx, rx, pcs).
> 
> Note that this defers the ungating of the PIPE clock somewhat, which is
> fine as it isn't needed until starting the PHY.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>   drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 51 +++++++-----------------
>   1 file changed, 15 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> index dd7e72424fc0..f57d10f20277 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> @@ -1820,46 +1820,32 @@ static void qmp_pcie_configure(void __iomem *base,
>   	qmp_pcie_configure_lane(base, tbl, num, 0xff);
>   }
>   
> -static void qmp_pcie_serdes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tables)
> -{
> -	void __iomem *serdes = qmp->serdes;
> -
> -	if (!tables)
> -		return;
> -
> -	qmp_pcie_configure(serdes, tables->serdes, tables->serdes_num);
> -}
> -
> -static void qmp_pcie_lanes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tables)
> +static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
>   {
>   	const struct qmp_phy_cfg *cfg = qmp->cfg;
> +	void __iomem *serdes = qmp->serdes;
>   	void __iomem *tx = qmp->tx;
>   	void __iomem *rx = qmp->rx;
>   	void __iomem *tx2 = qmp->tx2;
>   	void __iomem *rx2 = qmp->rx2;
> +	void __iomem *pcs = qmp->pcs;
> +	void __iomem *pcs_misc = qmp->pcs_misc;
>   
> -	if (!tables)
> +	if (!tbls)
>   		return;
>   
> -	qmp_pcie_configure_lane(tx, tables->tx, tables->tx_num, 1);
> -	qmp_pcie_configure_lane(rx, tables->rx, tables->rx_num, 1);
> +	qmp_pcie_configure(serdes, tbls->serdes, tbls->serdes_num);
> +
> +	qmp_pcie_configure_lane(tx, tbls->tx, tbls->tx_num, 1);
> +	qmp_pcie_configure_lane(rx, tbls->rx, tbls->rx_num, 1);
>   
>   	if (cfg->lanes >= 2) {
> -		qmp_pcie_configure_lane(tx2, tables->tx, tables->tx_num, 2);
> -		qmp_pcie_configure_lane(rx2, tables->rx, tables->rx_num, 2);
> +		qmp_pcie_configure_lane(tx2, tbls->tx, tbls->tx_num, 2);
> +		qmp_pcie_configure_lane(rx2, tbls->rx, tbls->rx_num, 2);
>   	}
> -}
> -
> -static void qmp_pcie_pcs_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tables)
> -{
> -	void __iomem *pcs = qmp->pcs;
> -	void __iomem *pcs_misc = qmp->pcs_misc;
> -
> -	if (!tables)
> -		return;
>   
> -	qmp_pcie_configure(pcs, tables->pcs, tables->pcs_num);
> -	qmp_pcie_configure(pcs_misc, tables->pcs_misc, tables->pcs_misc_num);
> +	qmp_pcie_configure(pcs, tbls->pcs, tbls->pcs_num);
> +	qmp_pcie_configure(pcs_misc, tbls->pcs_misc, tbls->pcs_misc_num);

Nit: could we please keep it as `tables'?

>   }
>   
>   static int qmp_pcie_init(struct phy *phy)
> @@ -1932,8 +1918,8 @@ static int qmp_pcie_power_on(struct phy *phy)
>   	else
>   		mode_tables = cfg->tables_ep;
>   
> -	qmp_pcie_serdes_init(qmp, &cfg->tables);
> -	qmp_pcie_serdes_init(qmp, mode_tables);
> +	qmp_pcie_init_registers(qmp, &cfg->tables);
> +	qmp_pcie_init_registers(qmp, mode_tables);
>   
>   	ret = clk_prepare_enable(qmp->pipe_clk);
>   	if (ret) {
> @@ -1941,13 +1927,6 @@ static int qmp_pcie_power_on(struct phy *phy)
>   		return ret;
>   	}
>   
> -	/* Tx, Rx, and PCS configurations */
> -	qmp_pcie_lanes_init(qmp, &cfg->tables);
> -	qmp_pcie_lanes_init(qmp, mode_tables);
> -
> -	qmp_pcie_pcs_init(qmp, &cfg->tables);
> -	qmp_pcie_pcs_init(qmp, mode_tables);
> -
>   	/* Pull PHY out of reset state */
>   	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>   

-- 
With best wishes
Dmitry


  reply	other threads:[~2022-10-19 13:27 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-19 11:35 [PATCH v2 00/15] phy: qcom-qmp-pcie: add support for sc8280xp Johan Hovold
2022-10-19 11:35 ` [PATCH v2 01/15] phy: qcom-qmp-pcie: sort device-id table Johan Hovold
2022-10-19 12:28   ` Dmitry Baryshkov
2022-10-19 11:35 ` [PATCH v2 02/15] phy: qcom-qmp-pcie: move " Johan Hovold
2022-10-19 12:29   ` Dmitry Baryshkov
2022-10-19 11:35 ` [PATCH v2 03/15] phy: qcom-qmp-pcie: merge driver data Johan Hovold
2022-10-19 13:03   ` Dmitry Baryshkov
2022-10-19 11:35 ` [PATCH v2 04/15] phy: qcom-qmp-pcie: clean up device-tree parsing Johan Hovold
2022-10-19 11:35 ` [PATCH v2 05/15] phy: qcom-qmp-pcie: clean up probe initialisation Johan Hovold
2022-10-19 13:05   ` Dmitry Baryshkov
2022-10-19 11:35 ` [PATCH v2 06/15] phy: qcom-qmp-pcie: rename PHY ops structure Johan Hovold
2022-10-19 13:05   ` Dmitry Baryshkov
2022-10-19 11:35 ` [PATCH v2 07/15] phy: qcom-qmp-pcie: clean up PHY lane init Johan Hovold
2022-10-19 13:45   ` Dmitry Baryshkov
2022-10-19 11:35 ` [PATCH v2 08/15] phy: qcom-qmp-pcie: add register init helper Johan Hovold
2022-10-19 13:12   ` Dmitry Baryshkov [this message]
2022-10-19 13:25     ` Johan Hovold
2022-10-19 13:44       ` Dmitry Baryshkov
2022-10-19 13:51         ` Johan Hovold
2022-10-19 11:35 ` [PATCH v2 09/15] dt-bindings: phy: qcom,qmp-pcie: rename current bindings Johan Hovold
2022-10-19 12:39   ` Krzysztof Kozlowski
2022-10-19 11:35 ` [PATCH v2 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings Johan Hovold
2022-10-19 12:41   ` Krzysztof Kozlowski
2022-10-19 11:35 ` [PATCH v2 11/15] phy: qcom-qmp-pcie: restructure PHY creation Johan Hovold
2022-10-19 13:51   ` Dmitry Baryshkov
2022-10-19 11:35 ` [PATCH v2 12/15] phy: qcom-qmp-pcie: fix initialisation reset Johan Hovold
2022-10-19 13:51   ` Dmitry Baryshkov
2022-10-19 13:52   ` Dmitry Baryshkov
2022-10-21  9:11     ` Johan Hovold
2022-10-19 11:35 ` [PATCH v2 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock Johan Hovold
2022-10-20  8:31   ` Dmitry Baryshkov
2022-10-20  9:05     ` Johan Hovold
2022-10-20  9:28       ` Dmitry Baryshkov
2022-10-20 10:49         ` Johan Hovold
2022-10-20 10:53           ` Dmitry Baryshkov
2022-10-19 11:35 ` [PATCH v2 14/15] phy: qcom-qmp-pcie: add support for sc8280xp Johan Hovold
2022-10-19 11:35 ` [PATCH v2 15/15] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs Johan Hovold
2022-10-20  3:43   ` Dmitry Baryshkov
2022-10-20  6:43     ` Johan Hovold
2022-10-20  9:32       ` Dmitry Baryshkov
2022-10-20 10:59         ` Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0f1fff20-772f-c4d1-f803-f1824ef23780@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=johan+linaro@kernel.org \
    --cc=konrad.dybcio@somainline.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).