* Re: CDrecord -> Kernel panic
@ 2003-08-04 15:04 Joerg Schilling
2003-08-04 16:43 ` Alan Cox
0 siblings, 1 reply; 3+ messages in thread
From: Joerg Schilling @ 2003-08-04 15:04 UTC (permalink / raw)
To: autobot, linux-kernel; +Cc: schilling
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1453 bytes --]
>From ricardo@rio.terra.com.br Mon Aug 4 16:57:45 2003
> I've been getting several kernel panics due to CD burning.
> When tried to burn old CD-RWs (4x), sometimes I've got a kernel
>panic. The system told me a bug in the IDE stack (it had been told that
>the problem is in the ide-iops.c file). Fortunately I was using only
>CD-RWs... =3D)
>=09
> Let me send 2 U my info:
>=09
>cat /proc/version
>Linux version 2.4.21 (root@aragorn.rjp.org.br) (gcc version 3.2.2
>20030222 (Red Hat Linux 3.2.2-5)) #4 Seg Ago 4 10:49:02 BRT 2003
>cdrecord -version
>Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J=F6rg Schilling
Outdated.....
http://www.fokus.fhg.de/research/cc/glone/employees/joerg.schilling/private/problems.html
... but not the reason for the problem.
Recent 2.4 (>= 2.4.18) Kernels seem to be a nightmare with IDE drivers.
Maybe one of the kernel hackers has an idea.
As I am just trying to fix a IDE driver too, I know that the change in the IDE
subsystem caused some functions to be called with a wrong number of args. This
is most likely the reason for your kernel because the missing ars is a pointer
;-)
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.fraunhofer.de (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: CDrecord -> Kernel panic
2003-08-04 15:04 CDrecord -> Kernel panic Joerg Schilling
@ 2003-08-04 16:43 ` Alan Cox
0 siblings, 0 replies; 3+ messages in thread
From: Alan Cox @ 2003-08-04 16:43 UTC (permalink / raw)
To: Joerg Schilling; +Cc: autobot, Linux Kernel Mailing List
On Llu, 2003-08-04 at 16:04, Joerg Schilling wrote:
> Recent 2.4 (>= 2.4.18) Kernels seem to be a nightmare with IDE drivers.
> Maybe one of the kernel hackers has an idea.
2.4.21 fixed the reset v scsi retry race problem. (Also current Red Hat
errata)
^ permalink raw reply [flat|nested] 3+ messages in thread
* CDrecord -> Kernel panic
@ 2003-08-04 14:57 Ricardo Jurczyk Pinheiro
0 siblings, 0 replies; 3+ messages in thread
From: Ricardo Jurczyk Pinheiro @ 2003-08-04 14:57 UTC (permalink / raw)
To: linux-kernel; +Cc: schilling
I've been getting several kernel panics due to CD burning.
When tried to burn old CD-RWs (4x), sometimes I've got a kernel
panic. The system told me a bug in the IDE stack (it had been told that
the problem is in the ide-iops.c file). Fortunately I was using only
CD-RWs... =)
Let me send 2 U my info:
cat /proc/version
Linux version 2.4.21 (root@aragorn.rjp.org.br) (gcc version 3.2.2
20030222 (Red Hat Linux 3.2.2-5)) #4 Seg Ago 4 10:49:02 BRT 2003
cdrecord -version
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) processor
stepping : 4
cpu MHz : 1300.084
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 2588.67
cat /proc/modules
sg 31340 0 (autoclean)
sd_mod 12300 0 (autoclean) (unused)
r128 83768 1
snd-pcm-oss 53988 0 (autoclean)
snd-mixer-oss 18296 2 (autoclean) [snd-pcm-oss]
sr_mod 15928 0 (autoclean)
ip_conntrack_irc 4080 0 (unused)
ip_conntrack_ftp 5232 0 (unused)
ipt_MASQUERADE 2200 1
iptable_nat 20824 1 [ipt_MASQUERADE]
ipt_REJECT 4024 0 (unused)
ipt_LOG 4184 0 (unused)
ipt_state 1048 2 (autoclean)
ip_conntrack 26824 4 (autoclean) [ip_conntrack_irc ip_conntrack_ftp ipt_MASQUERADE iptable_nat ipt_state]
iptable_filter 2412 1 (autoclean)
ip_tables 14648 8 [ipt_MASQUERADE iptable_nat ipt_REJECT ipt_LOG ipt_state iptable_filter]
via686a 9792 0
eeprom 4308 0
adm1021 7032 0
i2c-proc 9136 0 [via686a eeprom adm1021]
i2c-isa 1800 0 (unused)
i2c-viapro 4528 0 (unused)
i2c-core 19012 0 [via686a eeprom adm1021 i2c-proc i2c-isa i2c-viapro]
aic7xxx_old 121760 0 (unused)
8139too 18632 1 (autoclean)
mii 3976 0 (autoclean) [8139too]
snd-seq-midi 6432 0 (unused)
snd-seq-midi-event 5704 0 [snd-seq-midi]
snd-seq 53200 0 [snd-seq-midi snd-seq-midi-event]
snd-ens1371 15276 2
snd-pcm 93152 0 [snd-pcm-oss snd-ens1371]
snd-page-alloc 9032 0 [snd-pcm]
snd-timer 21352 0 [snd-seq snd-pcm]
snd-ac97-codec 44992 0 [snd-ens1371]
snd-rawmidi 20128 0 [snd-seq-midi snd-ens1371]
snd-seq-device 6460 0 [snd-seq-midi snd-seq snd-rawmidi]
snd 49060 0 [snd-pcm-oss snd-mixer-oss snd-seq-midi snd-seq-midi-event snd-seq snd-ens1371 snd-pcm snd-timer snd-ac97-codec snd-rawmidi snd-seq-device]
soundcore 6468 6 [snd]
ide-scsi 12080 0
scsi_mod 99060 5 [sg sd_mod sr_mod aic7xxx_old ide-scsi]
ide-cd 35360 0
cdrom 33216 0 [sr_mod ide-cd]
nls_iso8859-1 3548 2 (autoclean)
nls_cp437 5148 2 (autoclean)
rtc 8444 0 (autoclean)
cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
4000-40ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
5000-500f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
5000-5007 : via2-smbus
6000-607f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
6000-607f : via686a-sensors
c000-cfff : PCI Bus #01
c000-c0ff : ATI Technologies Inc Rage 128 RF/SG AGP
d000-d00f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
d000-d007 : ide0
d008-d00f : ide1
d400-d41f : VIA Technologies, Inc. USB
d800-d81f : VIA Technologies, Inc. USB (#2)
dc00-dcff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
dc00-dcff : 8139too
e000-e0ff : Adaptec AHA-7850
e000-e0fe : aic7xxx
e400-e43f : Ensoniq ES1371 [AudioPCI-97]
e400-e43f : Ensoniq AudioPCI
cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-002610b7 : Kernel code
002610b8-002b80e7 : Kernel data
0fff0000-0fff2fff : ACPI Non-volatile Storage
0fff3000-0fffffff : ACPI Tables
e0000000-e3ffffff : PCI Bus #01
e0000000-e3ffffff : ATI Technologies Inc Rage 128 RF/SG AGP
e0000000-e11fffff : vesafb
e4000000-e5ffffff : VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
e6000000-e7ffffff : PCI Bus #01
e7000000-e7003fff : ATI Technologies Inc Rage 128 RF/SG AGP
e8000000-e80000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
e8000000-e80000ff : 8139too
e8001000-e8001fff : Adaptec AHA-7850
ffff0000-ffffffff : reserved
lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02)
Subsystem: ABIT Computer Corp. KT7/KT7-RAID/KT7A/KT7A-RAID Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=32M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e6000000-e7ffffff
Prefetchable memory behind bridge: e0000000-e3ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
Subsystem: ABIT Computer Corp.: Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT8235 Bus Master ATA133/100/66/33 IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 10) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 10) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 11
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:0b.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
Subsystem: Adaptec AHA-2904/Integrated AIC-7850
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at e8001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at e400 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Magnum/Xpert128/X99/Xpert2000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at e7000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: LG Model: DVD-ROM DRD8160B Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: HL-DT-ST Model: CD-RW GCE-8523B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Sorry I can't help (I'm surely not a kernel hacker), but maybe
it's a easy bug 2 fix.
Thanks,
--
Ricardo Jurczyk Pinheiro - M. Sc. Numerical Modelling - rjp@email.com.br
Anime, ABUB, MSX, Linux, Gospel, ST, Rock, Math... Fudeba! - ICQ: 3635907
Sola Scriptura - Sola Gratia - Sola Fide - Solo Christi - Soli Deo Gloria
Nao perturbe, tenho muitos sonhos pela frente.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-08-04 16:48 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-08-04 15:04 CDrecord -> Kernel panic Joerg Schilling
2003-08-04 16:43 ` Alan Cox
-- strict thread matches above, loose matches on Subject: below --
2003-08-04 14:57 Ricardo Jurczyk Pinheiro
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).