DMA broken in mainline 2.6.13.2 _AND_ opensuse vendor 2.6.13-15

DMA broken in mainline 2.6.13.2 _AND_ opensuse vendor 2.6.13-15

[David R]

[-- Attachment #1: Type: text/plain, Size: 1071 bytes --]

DMA is broken in 2.6.13.2 and opensuse 2.6.13-15, for  my  cdrom/dvd 
burner.

My chipset is:

00:0f.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)

I have also heard ICH5 has this problem as well.

I can tell you that hdparm -iI /dev/hdb reports the drive in udma4 mode.

This drive is a: LITE-ON DVDRW SOHW-1693S, FwRev=KS09 However I think 
that maybe irrelevant.

On .13 I get this at the end of dmesg:

hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec

On .12 I get this but not on .13:

VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
    ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:pio, hdd:pio



DMA was working correctly in 2.6.12


Attached is the .12 and .13 dmesg diff.



[-- Attachment #2: dmesg.diff --]
[-- Type: text/x-patch, Size: 15931 bytes --]

--- dmesg.12	2005-09-21 22:20:11.000000000 -0400
+++ dmesg.13	2005-09-21 22:10:35.000000000 -0400
@@ -1,4 +1,4 @@
-Linux version 2.6.12-ck5-onemaN (root@blackbox) (gcc version 3.3.4) #2 Sun Aug 14 05:07:28 EDT 2005
+Linux version 2.6.13-ck5-15 (geeko@buildhost) (gcc version 3.3.4) #1 Wed Sep 21 21:21:25 EDT 2005
 BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
@@ -15,40 +15,20 @@ On node 0 totalpages: 131067
   Normal zone: 126971 pages, LIFO batch:31
   HighMem zone: 0 pages, LIFO batch:1
 DMI 2.3 present.
-ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5e30
-ACPI: RSDT (v001 ASUS   A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb000
-ACPI: FADT (v001 ASUS   A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb0b2
-ACPI: BOOT (v001 ASUS   A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb030
-ACPI: MADT (v001 ASUS   A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb058
-ACPI: DSDT (v001   ASUS A7V600-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
-ACPI: Local APIC address 0xfee00000
-ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
-Processor #0 6:8 APIC version 16
-ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
-ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
-IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
-ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
-ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
-ACPI: IRQ0 used by override.
-ACPI: IRQ2 used by override.
-ACPI: IRQ9 used by override.
-Enabling APIC mode:  Flat.  Using 1 I/O APICs
-Using ACPI (MADT) for SMP configuration information
 Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
 Built 1 zonelists
 Kernel command line: root=/dev/sda1
-mapped APIC to ffffd000 (fee00000)
-mapped IOAPIC to ffffc000 (fec00000)
+Found and enabled local APIC!
 Initializing CPU#0
 PID hash table entries: 2048 (order: 11, 32768 bytes)
-Detected 1467.420 MHz processor.
+Detected 1467.174 MHz processor.
 Using tsc for high-res timesource
 Console: colour VGA+ 80x25
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 515152k/524268k available (2333k kernel code, 8508k reserved, 927k data, 168k init, 0k highmem)
+Memory: 514924k/524268k available (2533k kernel code, 8740k reserved, 975k data, 156k init, 0k highmem)
 Checking if this processor honours the WP bit even in supervisor mode... Ok.
-Calibrating delay loop... 2883.58 BogoMIPS (lpj=1441792)
+Calibrating delay using timer specific routine.. 2937.06 BogoMIPS (lpj=1468532)
 Security Framework v1.0.0 initialized
 SELinux:  Initializing.
 SELinux:  Starting in permissive mode
@@ -60,82 +40,62 @@ CPU: L2 Cache: 256K (64 bytes/line)
 CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
 Intel machine check architecture supported.
 Intel machine check reporting enabled on CPU#0.
+mtrr: v2.0 (20020519)
 CPU: AMD Athlon(TM) XP 1700+ stepping 01
 Enabling fast FPU save and restore... done.
 Enabling unmasked SIMD FPU exception support... done.
 Checking 'hlt' instruction... OK.
-ENABLING IO-APIC IRQs
-..TIMER: vector=0x31 pin1=2 pin2=-1
 NET: Registered protocol family 16
 PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
 PCI: Using configuration type 1
-mtrr: v2.0 (20020519)
-ACPI: Subsystem revision 20050309
-ACPI: Interpreter enabled
-ACPI: Using IOAPIC for interrupt routing
-ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
-ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
-ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
-ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
-ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12)
-ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
-ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
-ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled.
-ACPI: PCI Root Bridge [PCI0] (0000:00)
-PCI: Probing PCI hardware (bus 00)
-Boot video device is 0000:01:00.0
-ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
-ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
-Linux Plug and Play Support v0.97 (c) Adam Belay
 SCSI subsystem initialized
 usbcore: registered new driver usbfs
 usbcore: registered new driver hub
-PCI: Using ACPI for IRQ routing
-PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
-Simple Boot Flag at 0x3a set to 0x1
+PCI: Probing PCI hardware
+PCI: Probing PCI hardware (bus 00)
+Boot video device is 0000:01:00.0
+PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
+PCI: IRQ 0 for device 0000:00:0e.0 doesn't match PIRQ mask - try pci=usepirqmask
+spurious 8259A interrupt: IRQ7.
+PCI: Bridge: 0000:00:01.0
+  IO window: disabled.
+  MEM window: ee000000-efefffff
+  PREFETCH window: eff00000-f7ffffff
+PCI: Setting latency timer of device 0000:00:01.0 to 64
 Machine check exception polling timer started.
 Initializing Cryptographic API
 Real Time Clock Driver v1.12
 Linux agpgart interface v0.101 (c) Dave Jones
 [drm] Initialized drm 1.0.0 20040925
-PNP: No PS/2 controller found. Probing ports directly.
 serio: i8042 AUX port at 0x60,0x64 irq 12
 serio: i8042 KBD port at 0x60,0x64 irq 1
 io scheduler noop registered
 io scheduler cfq registered
 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
-ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
-PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 7
-eth0: VIA Rhine II at 0xed000000, 00:11:d8:4e:bf:d3, IRQ 23.
+PCI: setting IRQ 3 as level-triggered
+PCI: Assigned IRQ 3 for device 0000:00:12.0
+IRQ routing conflict for 0000:00:0f.1, have irq 14, want irq 3
+PCI: Sharing IRQ 3 with 0000:00:10.0
+PCI: Sharing IRQ 3 with 0000:00:10.1
+eth0: VIA Rhine II at 0xed000000, 00:11:d8:4e:bf:d3, IRQ 3.
 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
-VP_IDE: IDE controller at PCI slot 0000:00:0f.1
-ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
-PCI: Via IRQ fixup for 0000:00:0f.1, from 14 to 4
-VP_IDE: chipset revision 6
-VP_IDE: not 100% native mode: will probe irqs later
-VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
-    ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:pio, hdb:DMA
-    ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:pio, hdd:pio
 Probing IDE interface ide0...
 hdb: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
-ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
-Probing IDE interface ide1...
 Probing IDE interface ide1...
-Probing IDE interface ide2...
-Probing IDE interface ide3...
-Probing IDE interface ide4...
-Probing IDE interface ide5...
+ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
 hdb: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
 Uniform CD-ROM driver Revision: 3.20
-libata version 1.11 loaded.
+libata version 1.12 loaded.
 sata_via version 1.1
-ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
-PCI: Via IRQ fixup for 0000:00:0f.0, from 0 to 4
-sata_via(0000:00:0f.0): routed to hard irq line 4
-ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xB802 bmdma 0xA800 irq 20
-ata2: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA808 irq 20
+PCI: setting IRQ 9 as level-triggered
+PCI: Assigned IRQ 9 for device 0000:00:0f.0
+PCI: Sharing IRQ 9 with 0000:00:10.2
+PCI: Sharing IRQ 9 with 0000:00:10.3
+sata_via(0000:00:0f.0): routed to hard irq line 9
+ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xB802 bmdma 0xA800 irq 9
+ata2: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA808 irq 9
 ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f
 ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
 ata1: dev 0 configured for UDMA/133
@@ -162,43 +122,49 @@ SCSI device sdb: drive cache: write back
 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
-usbmon: debugs is not available
-ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
-PCI: Via IRQ fixup for 0000:00:10.4, from 0 to 5
+usbmon: debugfs is not available
+PCI: Found IRQ 11 for device 0000:00:10.4
+PCI: Sharing IRQ 11 with 0000:00:11.5
 ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
-ehci_hcd 0000:00:10.4: irq 21, io mem 0xed800000
+ehci_hcd 0000:00:10.4: irq 11, io mem 0xed800000
 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 8 ports detected
-ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
-USB Universal Host Controller Interface driver v2.2
-ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
-PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 5
+ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
+USB Universal Host Controller Interface driver v2.3
+PCI: Assigned IRQ 3 for device 0000:00:10.0
+IRQ routing conflict for 0000:00:0f.1, have irq 14, want irq 3
+PCI: Sharing IRQ 3 with 0000:00:10.1
+PCI: Sharing IRQ 3 with 0000:00:12.0
 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
-uhci_hcd 0000:00:10.0: irq 21, io base 0x00009800
+uhci_hcd 0000:00:10.0: irq 3, io base 0x00009800
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 2 ports detected
-ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
-PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 5
+PCI: Assigned IRQ 3 for device 0000:00:10.1
+IRQ routing conflict for 0000:00:0f.1, have irq 14, want irq 3
+PCI: Sharing IRQ 3 with 0000:00:10.0
+PCI: Sharing IRQ 3 with 0000:00:12.0
 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
-uhci_hcd 0000:00:10.1: irq 21, io base 0x00009400
+uhci_hcd 0000:00:10.1: irq 3, io base 0x00009400
 hub 3-0:1.0: USB hub found
 hub 3-0:1.0: 2 ports detected
-ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
-PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 5
+PCI: Assigned IRQ 9 for device 0000:00:10.2
+PCI: Sharing IRQ 9 with 0000:00:0f.0
+PCI: Sharing IRQ 9 with 0000:00:10.3
 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
-uhci_hcd 0000:00:10.2: irq 21, io base 0x00009000
+uhci_hcd 0000:00:10.2: irq 9, io base 0x00009000
 hub 4-0:1.0: USB hub found
 hub 4-0:1.0: 2 ports detected
-ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
-PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 5
+PCI: Assigned IRQ 9 for device 0000:00:10.3
+PCI: Sharing IRQ 9 with 0000:00:0f.0
+PCI: Sharing IRQ 9 with 0000:00:10.2
 uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
 uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
-uhci_hcd 0000:00:10.3: irq 21, io base 0x00008800
+uhci_hcd 0000:00:10.3: irq 9, io base 0x00008800
 hub 5-0:1.0: USB hub found
 hub 5-0:1.0: 2 ports detected
 usb 1-4: new high speed USB device using ehci_hcd and address 4
@@ -217,24 +183,47 @@ input: USB HID v1.10 Mouse [Logitech Log
 usbcore: registered new driver usbhid
 drivers/usb/input/hid-core.c: v2.01:USB HID core driver
 mice: PS/2 mouse device common for all mice
+Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28 12:20:13 2005 UTC).
+via82xx: Assuming DXS channels with 48k fixed sample rate.
+         Please try dxs_support=5 option
+         and report if it works on your machine.
+         For more details, read ALSA-Configuration.txt.
+PCI: Found IRQ 11 for device 0000:00:11.5
+PCI: Sharing IRQ 11 with 0000:00:10.4
+PCI: Setting latency timer of device 0000:00:11.5 to 64
+codec_read: codec 0 is not valid [0xfe0000]
+codec_read: codec 0 is not valid [0xfe0000]
+codec_read: codec 0 is not valid [0xfe0000]
+codec_read: codec 0 is not valid [0xfe0000]
+PCI: Enabling device 0000:00:0e.0 (0004 -> 0005)
+PCI: IRQ 0 for device 0000:00:0e.0 doesn't match PIRQ mask - try pci=usepirqmask
+PCI: setting IRQ 5 as level-triggered
+PCI: Assigned IRQ 5 for device 0000:00:0e.0
+ice1724: Invalid EEPROM version 1
+ALSA device list:
+  #0: VIA 8237 with AD1888 at 0xe000, irq 11
+  #1: Chaintech AV-710 at 0xd800, irq 5
 NET: Registered protocol family 2
-IP: routing cache hash table of 4096 buckets, 32Kbytes
+IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
 TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
 TCP: Hash tables configured (established 32768 bind 32768)
+TCP reno registered
 ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack
 ip_tables: (C) 2000-2002 Netfilter core team
 ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
 arp_tables: (C) 2002 David S. Miller
+TCP bic registered
 NET: Registered protocol family 1
 NET: Registered protocol family 17
+Using IPI Shortcut mode
 ReiserFS: sda1: found reiserfs format "3.6" with standard journal
 ReiserFS: sda1: using ordered data mode
 ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
 ReiserFS: sda1: checking transaction log (sda1)
 ReiserFS: sda1: Using r5 hash to sort names
 VFS: Mounted root (reiserfs filesystem) readonly.
-Freeing unused kernel memory: 168k freed
+Freeing unused kernel memory: 156k freed
 Adding 1502068k swap on /dev/sda3.  Priority:-1 extents:1
 ReiserFS: sda1: switching to writeback data mode
 ReiserFS: sda2: found reiserfs format "3.6" with standard journal
@@ -248,22 +237,12 @@ ReiserFS: sdb1: journal params: device s
 ReiserFS: sdb1: checking transaction log (sdb1)
 ReiserFS: sdb1: Using r5 hash to sort names
 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
-nvidia: module license 'NVIDIA' taints kernel.
-ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
-NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7676  Fri Jul 29 12:58:54 PDT 2005
-via82xx: Assuming DXS channels with 48k fixed sample rate.
-         Please try dxs_support=1 or dxs_support=4 option
-         and report if it works on your machine.
-ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
-PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 6
-PCI: Setting latency timer of device 0000:00:11.5 to 64
-ALSA /home/oneman/olddownloads/alsa-driver-1.0.9b/alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0xfe0000]
-ALSA /home/oneman/olddownloads/alsa-driver-1.0.9b/alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0xfe0000]
-ALSA /home/oneman/olddownloads/alsa-driver-1.0.9b/alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0xfe0000]
-ALSA /home/oneman/olddownloads/alsa-driver-1.0.9b/alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0xfe0000]
-PCI: Enabling device 0000:00:0e.0 (0004 -> 0005)
-ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 17
-ice1724: Invalid EEPROM version 1
 NET: Registered protocol family 10
 IPv6 over IPv4 tunneling driver
 eth0: no IPv6 routers present
+hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
+hdb: drive_cmd: error=0x04 { AbortedCommand }
+ide: failed opcode was: 0xec
+hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
+hdb: drive_cmd: error=0x04 { AbortedCommand }
+ide: failed opcode was: 0xec

Re: DMA broken in mainline 2.6.13.2 _AND_ opensuse vendor 2.6.13-15

[Lennart Sorensen]

On Wed, Sep 21, 2005 at 10:28:18PM -0400, David R wrote:
> DMA is broken in 2.6.13.2 and opensuse 2.6.13-15, for  my  cdrom/dvd 
> burner.
> 
> My chipset is:
> 
> 00:0f.1 IDE interface: VIA Technologies, Inc. 
> VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
> 
> I have also heard ICH5 has this problem as well.
> 
> I can tell you that hdparm -iI /dev/hdb reports the drive in udma4 mode.
> 
> This drive is a: LITE-ON DVDRW SOHW-1693S, FwRev=KS09 However I think 
> that maybe irrelevant.
> 
> On .13 I get this at the end of dmesg:
> 
> hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
> hdb: drive_cmd: error=0x04 { AbortedCommand }
> ide: failed opcode was: 0xec
> hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
> hdb: drive_cmd: error=0x04 { AbortedCommand }
> ide: failed opcode was: 0xec
> 
> On .12 I get this but not on .13:
> 
> VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>    ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:pio, hdb:DMA
>    ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:pio, hdd:pio

What is on hda?

If nothing, fix your system.  You should NOT have a slave without a
master on an ide bus.

Probably won't fix things, but sometimes it does fix things.

Len Sorensen

Re: DMA broken in mainline 2.6.13.2 _AND_ opensuse vendor 2.6.13-15

[Alan Cox]

On Mer, 2005-09-21 at 22:28 -0400, David R wrote:
> DMA is broken in 2.6.13.2 and opensuse 2.6.13-15, for  my  cdrom/dvd 
> burner.

The trace you posted looks like your .config is totally changed, in
particular that you turned off IDE PCI

Re: DMA broken in mainline 2.6.13.2 _AND_ opensuse vendor 2.6.13-15 - oopsers

[David R]

Alan Cox wrote:

>On Mer, 2005-09-21 at 22:28 -0400, David R wrote:
>  
>
>>DMA is broken in 2.6.13.2 and opensuse 2.6.13-15, for  my  cdrom/dvd 
>>burner.
>>    
>>
>The trace you posted looks like your .config is totally changed, in
>  
>
>particular that you turned off IDE PCI
>
>
>  
>
You are totaly correct and I apologize for that, the last thing I want 
to do is increase the noise level.  I spent several hours trying to get 
netconsole to work with this, but I spose it just happens to soon. Im 
getting an oops now. (The oops was happening a week or so ago when I 
first tried to upgrade from .12 to .13 by simply using make oldconfig 
and going from there, then I started poking around and eventualy the 
drive worked but with no dma)  Attached is my current oops generating 
config. Here is a digicam shot of my screen:

http://rawdod.com/photo20050922-12:05:56-0007.JPG

Again my drive is a:

LITE-ON DVDRW SOHW-1693S, FwRev=KS09 

And my IDE chip is a:
VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)

Thanks! 

-David

ps. Your beard rocks!

Re: DMA broken in mainline 2.6.13.2 _AND_ opensuse vendor 2.6.13-15

[David R]

[-- Attachment #1: Type: text/plain, Size: 321 bytes --]

Alan Cox wrote:

>On Mer, 2005-09-21 at 22:28 -0400, David R wrote:
>  
>
>>DMA is broken in 2.6.13.2 and opensuse 2.6.13-15, for  my  cdrom/dvd 
>>burner.
>>    
>>
>
>The trace you posted looks like your .config is totally changed, in
>particular that you turned off IDE PCI
>
>
>  
>
Woops, here is the .config :[ ]



[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 28465 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-ck5
# Thu Sep 22 10:38:44 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
# CONFIG_SWAP_PREFETCH is not set
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_1GLOWMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set

#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_IDEDISK is not set
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=y
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
# CONFIG_IEEE1394_EXPORT_FULL_API is not set

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=y
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
CONFIG_USB_POWERMATE=m
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SECLVL is not set
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

Re: DMA broken in mainline 2.6.13.2 _AND_ opensuse vendor 2.6.13-15 - oopsers

[Randy.Dunlap]

On Thu, 22 Sep 2005, David R wrote:

>
> >
> >
> >>DMA is broken in 2.6.13.2 and opensuse 2.6.13-15, for  my  cdrom/dvd
> >>
> >>
> >
> >particular that you turned off IDE PCI
> >
> >
> You are totaly correct and I apologize for that, the last thing I want
> to do is increase the noise level.  I spent several hours trying to get
> netconsole to work with this, but I spose it just happens to soon. Im
> getting an oops now. (The oops was happening a week or so ago when I
> first tried to upgrade from .12 to .13 by simply using make oldconfig
> and going from there, then I started poking around and eventualy the
> drive worked but with no dma)  Attached is my current oops generating
> config. Here is a digicam shot of my screen:
>

if you can't use serial console or netconsole, can you use a
smaller screen font so that we can see more oops info?
that screen shot is missing a good bit of info.

>
> Again my drive is a:
>
> LITE-ON DVDRW SOHW-1693S, FwRev=KS09
>
> And my IDE chip is a:
> VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
>
> Thanks!
>
> -David
>
> ps. Your beard rocks!

-- 
~Randy

Re: DMA broken in mainline 2.6.13.2 _AND_ opensuse vendor 2.6.13-15 - oopsers

[David R]

[-- Attachment #1: Type: text/plain, Size: 1483 bytes --]

Randy.Dunlap wrote:

>On Thu, 22 Sep 2005, David R wrote:
>
>  
>
>>>      
>>>
>>>>DMA is broken in 2.6.13.2 and opensuse 2.6.13-15, for  my  cdrom/dvd
>>>>
>>>>
>>>>        
>>>>
>>>particular that you turned off IDE PCI
>>>
>>>
>>>      
>>>
>>You are totaly correct and I apologize for that, the last thing I want
>>to do is increase the noise level.  I spent several hours trying to get
>>netconsole to work with this, but I spose it just happens to soon. Im
>>getting an oops now. (The oops was happening a week or so ago when I
>>first tried to upgrade from .12 to .13 by simply using make oldconfig
>>and going from there, then I started poking around and eventualy the
>>drive worked but with no dma)  Attached is my current oops generating
>>config. Here is a digicam shot of my screen:
>>
>>    
>>
>
>if you can't use serial console or netconsole, can you use a
>smaller screen font so that we can see more oops info?
>that screen shot is missing a good bit of info.
>  
>
Anything for Linux!

Ok, here are two more pictures:

http://rawdod.com/photo20050921-15:43:40-0066.jpg

http://rawdod.com/photo20050921-15:41:39-0065.jpg


Attached is my dmesg output from 2.6.12 to compare with.

Thanks!

David


>  
>
>>Again my drive is a:
>>
>>LITE-ON DVDRW SOHW-1693S, FwRev=KS09
>>
>>And my IDE chip is a:
>>VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
>>
>>Thanks!
>>
>>-David
>>
>>ps. Your beard rocks!
>>    
>>
>
>  
>


[-- Attachment #2: dmesg.2.6.12 --]
[-- Type: text/plain, Size: 14251 bytes --]

Linux version 2.6.12-ck5-onemaN (root@blackbox) (gcc version 3.3.4) #2 Sun Aug 14 05:07:28 EDT 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fffb000 (usable)
 BIOS-e820: 000000001fffb000 - 000000001ffff000 (ACPI data)
 BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131067
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126971 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5e30
ACPI: RSDT (v001 ASUS   A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb000
ACPI: FADT (v001 ASUS   A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb0b2
ACPI: BOOT (v001 ASUS   A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb030
ACPI: MADT (v001 ASUS   A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb058
ACPI: DSDT (v001   ASUS A7V600-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/sda1 vga=ask
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1467.420 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515152k/524268k available (2333k kernel code, 8508k reserved, 927k data, 168k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2883.58 BogoMIPS (lpj=1441792)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(TM) XP 1700+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
Initializing Cryptographic API
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler cfq registered
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 7
eth0: VIA Rhine II at 0xed000000, 00:11:d8:4e:bf:d3, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Via IRQ fixup for 0000:00:0f.1, from 14 to 4
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
    ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hdb: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hdb: ATAPI 12X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.11 loaded.
sata_via version 1.1
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
PCI: Via IRQ fixup for 0000:00:0f.0, from 0 to 4
sata_via(0000:00:0f.0): routed to hard irq line 4
ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xB802 bmdma 0xA800 irq 20
ata2: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA808 irq 20
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f
ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_via
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f
ata2: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_via
  Vendor: ATA       Model: ST3160023AS       Rev: 3.18
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: ST3160827AS       Rev: 3.00
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
usbmon: debugs is not available
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
PCI: Via IRQ fixup for 0000:00:10.4, from 0 to 5
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xed800000
ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 5
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x00009800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 5
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x00009400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 5
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x00009000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 5
uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x00008800
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 4
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-2: new low speed USB device using uhci_hcd and address 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1
input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:10.0-2
input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:10.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 168k freed
Adding 1502068k swap on /dev/sda3.  Priority:-1 extents:1
ReiserFS: sda1: switching to writeback data mode
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using writeback data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
ReiserFS: sdb1: using writeback data mode
ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdb1: checking transaction log (sdb1)
ReiserFS: sdb1: Using r5 hash to sort names
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7676  Fri Jul 29 12:58:54 PDT 2005
via82xx: Assuming DXS channels with 48k fixed sample rate.
         Please try dxs_support=1 or dxs_support=4 option
         and report if it works on your machine.
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 6
PCI: Setting latency timer of device 0000:00:11.5 to 64
ALSA /home/oneman/olddownloads/alsa-driver-1.0.9b/alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0xfe0000]
ALSA /home/oneman/olddownloads/alsa-driver-1.0.9b/alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0xfe0000]
ALSA /home/oneman/olddownloads/alsa-driver-1.0.9b/alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0xfe0000]
ALSA /home/oneman/olddownloads/alsa-driver-1.0.9b/alsa-kernel/pci/via82xx.c:583: codec_read: codec 0 is not valid [0xfe0000]
PCI: Enabling device 0000:00:0e.0 (0004 -> 0005)
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 17
ice1724: Invalid EEPROM version 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present