* [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 @ 2006-06-19 20:06 Thomas Gleixner 2006-06-20 14:51 ` Michal Piotrowski 2006-06-29 17:48 ` Pavel Machek 0 siblings, 2 replies; 14+ messages in thread From: Thomas Gleixner @ 2006-06-19 20:06 UTC (permalink / raw) To: LKML; +Cc: Ingo Molnar, Andrew Morton, Con Kolivas, Michal Piotrowski An updated patchset is available from: http://www.tglx.de/projects/hrtimers/2.6.17/patch-2.6.17-hrt-dyntick4.patch http://www.tglx.de/projects/hrtimers/2.6.17/patch-2.6.17-hrt-dyntick4.patches.tar.bz2 Changes since -V1: - Cleanups in clockevents along the review suggestions from Con - Export fixes for the jiffies functions from Michal - minor fixups e.g. APM breakage - patch descriptions added Thanks to all reviewers, bug reporters and patch authors. Thomas, Ingo ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-19 20:06 [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 Thomas Gleixner @ 2006-06-20 14:51 ` Michal Piotrowski 2006-06-29 17:48 ` Pavel Machek 1 sibling, 0 replies; 14+ messages in thread From: Michal Piotrowski @ 2006-06-20 14:51 UTC (permalink / raw) To: tglx; +Cc: LKML, Ingo Molnar, Andrew Morton, Con Kolivas Hi, On 19/06/06, Thomas Gleixner <tglx@timesys.com> wrote: > An updated patchset is available from: > > http://www.tglx.de/projects/hrtimers/2.6.17/patch-2.6.17-hrt-dyntick4.patch [snip] > - minor fixups e.g. APM breakage Problem fixed, thanks. > Thomas, Ingo Regards, Michal -- Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/) ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-19 20:06 [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 Thomas Gleixner 2006-06-20 14:51 ` Michal Piotrowski @ 2006-06-29 17:48 ` Pavel Machek 2006-06-29 19:03 ` Thomas Gleixner 1 sibling, 1 reply; 14+ messages in thread From: Pavel Machek @ 2006-06-29 17:48 UTC (permalink / raw) To: Thomas Gleixner Cc: LKML, Ingo Molnar, Andrew Morton, Con Kolivas, Michal Piotrowski Hi! > An updated patchset is available from: > > http://www.tglx.de/projects/hrtimers/2.6.17/patch-2.6.17-hrt-dyntick4.patch > > http://www.tglx.de/projects/hrtimers/2.6.17/patch-2.6.17-hrt-dyntick4.patches.tar.bz2 I briefly tested -dyntick5 on my thinkpad, and it seems to work okay... but timer still seems to tick at 250Hz. I have CONFIG_NO_HZ=y CONFIG_NO_IDLE_HZ=y CONFIG_HIGH_RES_RESOLUTION=1000 # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 root@amd:/proc/sys# cat /proc/interrupts ; sleep 10; cat /proc/interrupts CPU0 0: 66865 XT-PIC timer 1: 1473 XT-PIC i8042 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 9: 249 XT-PIC acpi 11: 214 XT-PIC ohci1394, yenta, yenta, ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, Intel 82801DB-ICH4, eth0 12: 641 XT-PIC i8042 14: 2476 XT-PIC ide0 NMI: 0 LOC: 0 ERR: 0 MIS: 0 CPU0 0: 69374 XT-PIC timer 1: 1474 XT-PIC i8042 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 9: 249 XT-PIC acpi 11: 219 XT-PIC ohci1394, yenta, yenta, ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, Intel 82801DB-ICH4, eth0 12: 641 XT-PIC i8042 14: 2491 XT-PIC ide0 NMI: 0 LOC: 0 ERR: 0 MIS: 0 root@amd:/proc/sys# ...am I doing something wrong? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-29 17:48 ` Pavel Machek @ 2006-06-29 19:03 ` Thomas Gleixner 2006-06-30 18:07 ` Pavel Machek 0 siblings, 1 reply; 14+ messages in thread From: Thomas Gleixner @ 2006-06-29 19:03 UTC (permalink / raw) To: Pavel Machek Cc: LKML, Ingo Molnar, Andrew Morton, Con Kolivas, Michal Piotrowski Pavel, On Thu, 2006-06-29 at 19:48 +0200, Pavel Machek wrote: > I briefly tested -dyntick5 on my thinkpad, and it seems to work > okay... but timer still seems to tick at 250Hz. > ...am I doing something wrong? can you send me the bootlog and your .config file please ? tglx ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-29 19:03 ` Thomas Gleixner @ 2006-06-30 18:07 ` Pavel Machek 2006-06-30 19:15 ` Thomas Gleixner 0 siblings, 1 reply; 14+ messages in thread From: Pavel Machek @ 2006-06-30 18:07 UTC (permalink / raw) To: Thomas Gleixner Cc: LKML, Ingo Molnar, Andrew Morton, Con Kolivas, Michal Piotrowski [-- Attachment #1: Type: text/plain, Size: 613 bytes --] Hi! > > I briefly tested -dyntick5 on my thinkpad, and it seems to work > > okay... but timer still seems to tick at 250Hz. > > > ...am I doing something wrong? > > can you send me the bootlog and your .config file please ? ...attached. (I do not have to enable anything in sysfs/commandline to enable noidlehz, right?). On a related note, swapoff -a, echo disk > /sys/power/state is enough to kill the machine in timer_resume code with this patch applied. Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html [-- Attachment #2: delme --] [-- Type: text/plain, Size: 22056 bytes --] Linux version 2.6.17-gee84a7fd-dirty (pavel@amd) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #277 SMP Thu Jun 29 13:12:52 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005ff60000 (usable) BIOS-e820: 000000005ff60000 - 000000005ff77000 (ACPI data) BIOS-e820: 000000005ff77000 - 000000005ff79000 (ACPI NVS) BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 639MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 393056 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 163680 pages, LIFO batch:31 DMI present. ACPI: RSDP (v002 IBM ) @ 0x000f6df0 ACPI: XSDT (v001 IBM TP-1Q 0x00003004 LTP 0x00000000) @ 0x5ff69e78 ACPI: FADT (v003 IBM TP-1Q 0x00003004 IBM 0x00000001) @ 0x5ff69f00 ACPI: SSDT (v001 IBM TP-1Q 0x00003004 MSFT 0x0100000e) @ 0x5ff6a0b4 ACPI: ECDT (v001 IBM TP-1Q 0x00003004 IBM 0x00000001) @ 0x5ff76e11 ACPI: TCPA (v001 IBM TP-1Q 0x00003004 PTL 0x00000001) @ 0x5ff76e63 ACPI: BOOT (v001 IBM TP-1Q 0x00003004 LTP 0x00000001) @ 0x5ff76fd8 ACPI: DSDT (v001 IBM TP-1Q 0x00003004 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 70000000 (gap: 60000000:9f800000) Detected 1798.533 MHz processor. Built 1 zonelists. Total pages: 393056 Kernel command line: root=/dev/hda4 resume=/dev/hda1 psmouse.psmouse_proto=imps psmouse_proto=imps psmouse.proto=imps vga=1 init=/tmp/swsusp-init Unknown boot option `psmouse.psmouse_proto=imps': ignoring Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01c0f000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x50 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1549136k/1572224k available (5159k kernel code, 22048k reserved, 1889k data, 296k init, 654720k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3599.31 BogoMIPS (lpj=7198622) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 24k freed ACPI: Core revision 20060608 tbxface-0107 [02] load_tables : ACPI Tables successfully acquired Parsing all Control Methods: Table [DSDT](id 0006) - 1407 Objects with 65 Devices 442 Methods 19 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI Namespace successfully loaded at root c093ba30 ACPI: setting ELCR to 0200 (from 0800) evxfevnt-0089 [03] enable : Transition to ACPI mode successful CPU0: Intel(R) Pentium(R) M processor 1.80GHz stepping 06 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 PM: Adding info for No Bus:platform NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 Setting up standard PCI resources evgpeblk-0951 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1048 [05] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block ACPI: Found ECDT Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................................................................................................. Initialized 18/19 Regions 123/123 Fields 58/58 Buffers 42/49 Packages (1417 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:........... Executed 11 _INI methods requiring 3 _STA executions (examined 69 objects) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing PM: Adding info for acpi:acpi ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:1d.0 PM: Adding info for pci:0000:00:1d.1 PM: Adding info for pci:0000:00:1d.2 PM: Adding info for pci:0000:00:1d.7 PM: Adding info for pci:0000:00:1e.0 PM: Adding info for pci:0000:00:1f.0 PM: Adding info for pci:0000:00:1f.1 PM: Adding info for pci:0000:00:1f.3 PM: Adding info for pci:0000:00:1f.5 PM: Adding info for pci:0000:00:1f.6 PM: Adding info for pci:0000:01:00.0 PM: Adding info for pci:0000:02:00.0 PM: Adding info for pci:0000:02:00.1 PM: Adding info for pci:0000:02:00.2 PM: Adding info for pci:0000:02:01.0 PM: Adding info for pci:0000:02:02.0 ACPI: Embedded Controller [EC] (gpe 28) interrupt mode. ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report irda_init() NET: Registered protocol family 23 Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: c0100000-c01fffff PREFETCH window: e0000000-e7ffffff PCI: Bus 3, cardbus bridge: 0000:02:00.0 IO window: 00004000-000040ff IO window: 00004400-000044ff PREFETCH window: e8000000-e9ffffff MEM window: c2000000-c3ffffff PCI: Bus 7, cardbus bridge: 0000:02:00.1 IO window: 00004800-000048ff IO window: 00004c00-00004cff PREFETCH window: ea000000-ebffffff MEM window: c4000000-c5ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-8fff MEM window: c0200000-cfffffff PREFETCH window: e8000000-efffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 acpi_bus-0201 [07] bus_set_power : Device is not power manageable PCI: setting IRQ 11 as level-triggered acpi_bus-0201 [07] bus_set_power : Device is not power manageable NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered PM: Adding info for platform:pcspkr Simple Boot Flag at 0x35 set to 0x80 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. highmem bounce pool size: 64 pages Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.27 [Flags: R/O DEBUG]. fuse init (API version 7.7) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [4294967295] registered acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=144.00 Mhz, System=144.00 MHz radeonfb: PLL min 12000 max 35000 PM: Adding info for No Bus:i2c-0 PM: Adding info for No Bus:i2c-1 PM: Adding info for No Bus:i2c-2 PM: Adding info for No Bus:i2c-3 Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: 1024x768 radeonfb: detected LVDS panel size from BIOS: 1024x768 radeondb: BIOS provided dividers will be used radeonfb: Dynamic Clock Power Management enabled Console: switching to colour frame buffer device 102x42 radeonfb (0000:01:00.0): ATI Radeon LY PM: Adding info for platform:vesafb.0 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Using specific hotkey driver ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (57 C) ibm_acpi: IBM ThinkPad ACPI Extras v0.12a ibm_acpi: http://ibm-acpi.sf.net/ acpi_bus-0073 [19] bus_get_device : No context for object [c1d0d464] ibm_acpi: bay device not present lp: driver loaded but no devices found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.25.0 20060524 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled PM: Adding info for platform:serial8250 acpi_bus-0201 [19] bus_set_power : Device is not power manageable ACPI: PCI interrupt for device 0000:00:1f.6 disabled parport0: PC-style at 0x3bc [PCSPP(,...)] lp0: using parport0 (polling). PM: Adding info for No Bus:isa Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 PM: Adding info for platform:floppy.0 loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.0.38-k4 Copyright (c) 1999-2006 Intel Corporation. e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:11:25:b2:13:20 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al) bcm43xx driver usbcore: registered new driver zd1201 Linux video capture interface: v2.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: HTS541040G9AT00, ATA DISK drive PM: Adding info for No Bus:ide0 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 PM: Adding info for ide:0.0 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/7539KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 libata version 2.00 loaded. PM: Adding info for ieee1394:fw-host0 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[c0211000-c02117ff] Max Packet=[2048] IR/IT contexts=[4/4] ieee1394: raw1394: /dev/raw1394 device initialized ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance Yenta: CardBus bridge found at 0000:02:00.0 [1014:0532] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000810 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff cs: IO port probe 0x4000-0x8fff: clean. pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff Yenta: CardBus bridge found at 0000:02:00.1 [1014:0532] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff cs: IO port probe 0x4000-0x8fff: clean. pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff PM: Adding info for platform:i82365.0 Intel ISA PCIC probe: not found. PM: Removing info for platform:i82365.0 Databook TCIC-2 PCMCIA probe: not found. PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected PM: Adding info for No Bus:usbdev1.1_ep81 PM: Adding info for No Bus:usbdev1.1 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected pccard: PCMCIA card inserted into slot 0 cs: memory probe 0xe8000000-0xefffffff: excluding 0xe8000000-0xefffffff cs: memory probe 0xc0200000-0xcfffffff: excluding 0xc0200000-0xc11fffff 0xc1a00000-0xc61fffff 0xc6a00000-0xc71fffff 0xc7a00000-0xc81fffff 0xc8a00000-0xc91fffff 0xc9a00000-0xca1fffff 0xcaa00000-0xcb1fffff 0xcba00000-0xcc1fffff 0xcca00000-0xcd1fffff 0xcda00000-0xce1fffff 0xcea00000-0xcf1fffff 0xcfa00000-0xd01fffff pcmcia: registering new device pcmcia0.0 PM: Adding info for pcmcia:0.0 PM: Adding info for No Bus:usbdev2.1_ep81 PM: Adding info for No Bus:usbdev2.1 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 PM: Adding info for usb:usb3 PM: Adding info for No Bus:usbdev3.1_ep00 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 PM: Adding info for No Bus:usbdev3.1 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 PM: Adding info for usb:usb4 PM: Adding info for No Bus:usbdev4.1_ep00 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 PM: Adding info for ieee1394:00061b032904c34f hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032904c34f] PM: Adding info for No Bus:usbdev4.1_ep81 PM: Adding info for No Bus:usbdev4.1 usbcore: registered new driver cdc_acm drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver catc drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver usbcore: registered new driver asix usbcore: registered new driver cdc_ether usbcore: registered new driver net1080 usbcore: registered new driver cdc_subset usbcore: registered new driver zaurus PM: Adding info for platform:i8042 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 PM: Adding info for serio:serio0 PM: Adding info for serio:serio1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 PM: Adding info for No Bus:i2c-9191 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com Bluetooth: HCI USB driver ver 2.9 usbcore: registered new driver hci_usb Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized EDAC MC: Ver: 2.0.0 Jun 29 2006 Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). PCI: Setting latency timer of device 0000:00:1f.5 to 64 input: PS/2 Generic Mouse as /class/input/input2 intel8x0_measure_ac97_clock: measured 56003 usecs intel8x0: clocking to 48000 PM: Adding info for ac97:0-0:AD1981B usbcore: registered new driver snd-usb-audio ALSA device list: #0: Intel 82801DB-ICH4 with AD1981B at 0xc0000c00, irq 11 oprofile: using timer interrupt. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 204 bytes per conntrack ip_tables: (C) 2000-2006 Netfilter Core Team TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 IrCOMM protocol (Dag Brattli) Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.5 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.7 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.1 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' acpi_processor-0758 [18] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination acpi_processor-0758 [18] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination Using IPI No-Shortcut mode swsusp: Resume From Partition /dev/hda1 PM: Checking swsusp image. Time: tsc clocksource has been installed. Time: acpi_pm clocksource has been installed. PM: Resume from disk failed. ACPI: (supports S0 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: hda4: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 567856 ext3_orphan_cleanup: deleting unreferenced inode 567854 EXT3-fs: hda4: 2 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 296k freed EXT3 FS on hda4, internal journal Adding 2136448k swap on /dev/hda1. Priority:-1 extents:1 across:2136448k pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0x310-0x380: excluding 0x370-0x377 cs: IO port probe 0x310-0x380: excluding 0x370-0x377 cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xa00-0xaff: clean. ttyS0: detected caps 00000700 should be 00000100 0.0: ttyS0 at I/O 0x4100 (irq = 7) is a 16C950/954 coda_read_super: Bad mount data coda_read_super: device index: 0 coda_read_super: No pseudo device kjournald starting. Commit interval 6000 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed. [-- Attachment #3: .config --] [-- Type: text/plain, Size: 50520 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.17-hrt-dyntick5 # Thu Jun 29 19:21:51 2006 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_VM86=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y # # Block layer # CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # CONFIG_HIGH_RES_TIMERS=y CONFIG_NO_HZ=y CONFIG_NO_IDLE_HZ=y CONFIG_HIGH_RES_RESOLUTION=1000 CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y # CONFIG_HPET_TIMER is not set CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_SCHED_MC is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_MCE is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y # CONFIG_X86_CPUID is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_IRQBALANCE=y CONFIG_REGPARM=y # CONFIG_SECCOMP is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x100000 CONFIG_HOTPLUG_CPU=y # # Power management options (ACPI, APM) # CONFIG_PM=y CONFIG_PM_LEGACY=y CONFIG_PM_DEBUG=y CONFIG_SOFTWARE_SUSPEND=y CONFIG_PM_STD_PARTITION="" CONFIG_SUSPEND_SMP=y # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_SLEEP_PROC_SLEEP=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=y CONFIG_ACPI_HOTKEY=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set CONFIG_ACPI_IBM=y # CONFIG_ACPI_IBM_DOCK is not set CONFIG_ACPI_TOSHIBA=y # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_DEBUG=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # # APM (Advanced Power Management) BIOS Support # CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set CONFIG_APM_DO_ENABLE=y CONFIG_APM_CPU_IDLE=y CONFIG_APM_DISPLAY_BLANK=y # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y # CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=y # CONFIG_X86_POWERNOW_K6 is not set CONFIG_X86_POWERNOW_K7=y CONFIG_X86_POWERNOW_K7_ACPI=y CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y # CONFIG_X86_GX_SUSPMOD is not set CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y CONFIG_X86_SPEEDSTEP_ICH=y CONFIG_X86_SPEEDSTEP_SMI=y # CONFIG_X86_P4_CLOCKMOD is not set # CONFIG_X86_CPUFREQ_NFORCE2 is not set # CONFIG_X86_LONGRUN is not set # # shared options # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_X86_SPEEDSTEP_LIB=y # CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCCARD (PCMCIA/CardBus) support # CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=y CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y # CONFIG_PD6729 is not set CONFIG_I82092=y CONFIG_I82365=y CONFIG_TCIC=y CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=y # # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set # CONFIG_HOTPLUG_PCI_COMPAQ is not set CONFIG_HOTPLUG_PCI_IBM=y CONFIG_HOTPLUG_PCI_ACPI=y CONFIG_HOTPLUG_PCI_ACPI_IBM=y # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y # # Networking # CONFIG_NET=y # # Networking options # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_MULTIPLE_TABLES is not set # CONFIG_IP_ROUTE_MULTIPATH is not set # CONFIG_IP_ROUTE_VERBOSE is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set CONFIG_NETFILTER_XTABLES=y # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATE is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=y # CONFIG_IP_NF_CT_ACCT is not set # CONFIG_IP_NF_CONNTRACK_MARK is not set # CONFIG_IP_NF_CONNTRACK_EVENTS is not set # CONFIG_IP_NF_CT_PROTO_SCTP is not set CONFIG_IP_NF_FTP=y # CONFIG_IP_NF_IRC is not set # CONFIG_IP_NF_NETBIOS_NS is not set # CONFIG_IP_NF_TFTP is not set # CONFIG_IP_NF_AMANDA is not set # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_IPRANGE=y CONFIG_IP_NF_MATCH_TOS=y CONFIG_IP_NF_MATCH_RECENT=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_DSCP=y CONFIG_IP_NF_MATCH_AH=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_MATCH_OWNER=y CONFIG_IP_NF_MATCH_ADDRTYPE=y CONFIG_IP_NF_MATCH_HASHLIMIT=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_IP_NF_TARGET_TCPMSS=y CONFIG_IP_NF_NAT=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_IP_NF_TARGET_NETMAP=y CONFIG_IP_NF_TARGET_SAME=y CONFIG_IP_NF_NAT_SNMP_BASIC=y CONFIG_IP_NF_NAT_FTP=y CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_DSCP=y CONFIG_IP_NF_TARGET_TTL=y CONFIG_IP_NF_RAW=y # CONFIG_IP_NF_ARPTABLES is not set # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling # # CONFIG_NET_SCH_CBQ is not set CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y # CONFIG_NET_SCH_RED is not set CONFIG_NET_SCH_SFQ=y # CONFIG_NET_SCH_TEQL is not set # CONFIG_NET_SCH_TBF is not set # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_DSMARK is not set # CONFIG_NET_SCH_NETEM is not set # CONFIG_NET_SCH_INGRESS is not set # # Classification # CONFIG_NET_CLS=y # CONFIG_NET_CLS_BASIC is not set CONFIG_NET_CLS_TCINDEX=y CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set # CONFIG_NET_CLS_POLICE is not set CONFIG_NET_CLS_IND=y CONFIG_NET_ESTIMATOR=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set CONFIG_IRDA=y # # IrDA protocols # CONFIG_IRLAN=y CONFIG_IRNET=y CONFIG_IRCOMM=y # CONFIG_IRDA_ULTRA is not set # # IrDA options # # CONFIG_IRDA_CACHE_LAST_LSAP is not set # CONFIG_IRDA_FAST_RR is not set CONFIG_IRDA_DEBUG=y # # Infrared-port device drivers # # # SIR device drivers # # CONFIG_IRTTY_SIR is not set # # Dongle support # # # Old SIR device drivers # # # Old Serial dongle support # # # FIR device drivers # # CONFIG_USB_IRDA is not set # CONFIG_SIGMATEL_FIR is not set # CONFIG_NSC_FIR is not set # CONFIG_WINBOND_FIR is not set CONFIG_TOSHIBA_FIR=y # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set # CONFIG_VLSI_FIR is not set # CONFIG_VIA_FIR is not set CONFIG_BT=y CONFIG_BT_L2CAP=y CONFIG_BT_SCO=y CONFIG_BT_RFCOMM=y CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=y CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=y # # Bluetooth device drivers # CONFIG_BT_HCIUSB=y CONFIG_BT_HCIUSB_SCO=y CONFIG_BT_HCIUART=y CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y # CONFIG_BT_HCIBCM203X is not set # CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIDTL1 is not set # CONFIG_BT_HCIBT3C is not set CONFIG_BT_HCIBLUECARD=y CONFIG_BT_HCIBTUART=y # CONFIG_BT_HCIVHCI is not set CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y # CONFIG_IEEE80211_CRYPT_CCMP is not set # CONFIG_IEEE80211_CRYPT_TKIP is not set CONFIG_IEEE80211_SOFTMAC=y # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set CONFIG_WIRELESS_EXT=y # # Device Drivers # # # Generic Driver Options # # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_PC_FIFO=y CONFIG_PARPORT_PC_SUPERIO=y # CONFIG_PARPORT_PC_PCMCIA is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # # CONFIG_PNP is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECS=y CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set CONFIG_BLK_DEV_ALI15X3=y # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_CS5535 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_ARM is not set CONFIG_IDE_CHIPSETS=y # # Note: most of these also require special kernel boot parameters # # CONFIG_BLK_DEV_4DRIVES is not set CONFIG_BLK_DEV_ALI14XX=y # CONFIG_BLK_DEV_DTC2278 is not set # CONFIG_BLK_DEV_HT6560B is not set # CONFIG_BLK_DEV_QD65XX is not set # CONFIG_BLK_DEV_UMC8672 is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=y # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set # CONFIG_SCSI_SATA_VITESSE is not set CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # PCMCIA SCSI adapter support # # CONFIG_PCMCIA_AHA152X is not set # CONFIG_PCMCIA_FDOMAIN is not set # CONFIG_PCMCIA_NINJA_SCSI is not set # CONFIG_PCMCIA_QLOGIC is not set # CONFIG_PCMCIA_SYM53C500 is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_RAID6 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # CONFIG_IEEE1394=y # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set CONFIG_IEEE1394_OUI_DB=y # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set # CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers # # CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=y # # Protocol Drivers # # CONFIG_IEEE1394_VIDEO1394 is not set CONFIG_IEEE1394_SBP2=y # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set # CONFIG_IEEE1394_ETH1394 is not set # CONFIG_IEEE1394_DV1394 is not set CONFIG_IEEE1394_RAWIO=y # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # # ARCnet devices # # CONFIG_ARCNET is not set # # PHY device support # # CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set CONFIG_TULIP=y # CONFIG_TULIP_MWI is not set CONFIG_TULIP_MMIO=y # CONFIG_TULIP_NAPI is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_PCMCIA_XIRCOM is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set CONFIG_HP100=y CONFIG_NET_ISA=y # CONFIG_E2100 is not set # CONFIG_EWRK3 is not set # CONFIG_EEXPRESS is not set # CONFIG_EEXPRESS_PRO is not set # CONFIG_HPLAN_PLUS is not set # CONFIG_HPLAN is not set # CONFIG_LP486E is not set # CONFIG_ETH16I is not set CONFIG_NE2000=y # CONFIG_ZNET is not set # CONFIG_SEEQ8005 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y CONFIG_AMD8111_ETH=y # CONFIG_AMD8111E_NAPI is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set CONFIG_B44=y # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set CONFIG_8139TOO=y CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set CONFIG_VIA_RHINE=y # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y # CONFIG_NET_WIRELESS_RTNETLINK is not set # # Obsolete Wireless cards support (pre-802.11) # # CONFIG_STRIP is not set # CONFIG_ARLAN is not set # CONFIG_WAVELAN is not set # CONFIG_PCMCIA_WAVELAN is not set # CONFIG_PCMCIA_NETWAVE is not set # # Wireless 802.11 Frequency Hopping cards support # # CONFIG_PCMCIA_RAYCS is not set # # Wireless 802.11b ISA/PCI cards support # # CONFIG_IPW2100 is not set CONFIG_IPW2200=m # CONFIG_IPW2200_MONITOR is not set # CONFIG_IPW_QOS is not set # CONFIG_IPW2200_DEBUG is not set # CONFIG_AIRO is not set CONFIG_HERMES=y # CONFIG_PLX_HERMES is not set # CONFIG_TMD_HERMES is not set # CONFIG_NORTEL_HERMES is not set # CONFIG_PCI_HERMES is not set # CONFIG_ATMEL is not set # # Wireless 802.11b Pcmcia/Cardbus cards support # # CONFIG_PCMCIA_HERMES is not set # CONFIG_PCMCIA_SPECTRUM is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # # CONFIG_PRISM54 is not set # CONFIG_HOSTAP is not set CONFIG_BCM43XX=y CONFIG_BCM43XX_DEBUG=y CONFIG_BCM43XX_DMA=y CONFIG_BCM43XX_PIO=y CONFIG_BCM43XX_DMA_AND_PIO_MODE=y # CONFIG_BCM43XX_DMA_MODE is not set # CONFIG_BCM43XX_PIO_MODE is not set CONFIG_NET_WIRELESS=y # # PCMCIA network device support # # CONFIG_NET_PCMCIA is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set CONFIG_PPP_ASYNC=y # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=y CONFIG_PPP_BSDCOMP=y # CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set CONFIG_SLIP=y CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_WISTRON_BTNS is not set CONFIG_INPUT_UINPUT=y # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_CS=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # CONFIG_AGP=y # CONFIG_AGP_ALI is not set CONFIG_AGP_ATI=y CONFIG_AGP_AMD=y CONFIG_AGP_AMD64=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set CONFIG_AGP_VIA=y # CONFIG_AGP_EFFICEON is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_MWAVE is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # # I2C support # CONFIG_I2C=y # CONFIG_I2C_CHARDEV is not set # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # CONFIG_I2C_ALI1535=y # CONFIG_I2C_ALI1563 is not set CONFIG_I2C_ALI15X3=y # CONFIG_I2C_AMD756 is not set CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_ISA=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y CONFIG_HWMON_VID=y CONFIG_SENSORS_ADM1021=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_IT87=y # CONFIG_SENSORS_LM63 is not set CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set CONFIG_SENSORS_LM78=y # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set CONFIG_SENSORS_LM85=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set CONFIG_SENSORS_VIA686A=y # CONFIG_SENSORS_VT8231 is not set CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y # # Video Capture Adapters # # # Video Capture Adapters # # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_VIVI is not set CONFIG_VIDEO_BT848=y # CONFIG_VIDEO_SAA6588 is not set # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_OVCAMCHIP is not set # # Encoders and Decoders # CONFIG_VIDEO_MSP3400=y # CONFIG_VIDEO_CS53L32A is not set # CONFIG_VIDEO_WM8775 is not set # CONFIG_VIDEO_WM8739 is not set # CONFIG_VIDEO_CX25840 is not set # CONFIG_VIDEO_SAA711X is not set # CONFIG_VIDEO_SAA7127 is not set # CONFIG_VIDEO_UPD64031A is not set # CONFIG_VIDEO_UPD64083 is not set # # V4L USB devices # # CONFIG_VIDEO_EM28XX is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_ET61X251 is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_W9968CF is not set # CONFIG_USB_ZC0301 is not set # CONFIG_USB_PWC is not set # # Radio Adapters # # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set # CONFIG_RADIO_RTRACK2 is not set # CONFIG_RADIO_AZTECH is not set # CONFIG_RADIO_GEMTEK is not set # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # CONFIG_RADIO_SF16FMI is not set # CONFIG_RADIO_SF16FMR2 is not set # CONFIG_RADIO_TERRATEC is not set # CONFIG_RADIO_TRUST is not set # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set CONFIG_VIDEO_TUNER=y CONFIG_VIDEO_BUF=y CONFIG_VIDEO_BTCX=y CONFIG_VIDEO_IR=y CONFIG_VIDEO_TVEEPROM=y # CONFIG_USB_DABUSB is not set # # Graphics support # CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_FIRMWARE_EDID is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y CONFIG_VIDEO_SELECT=y # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_DEBUG is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set # CONFIG_FONT_8x16 is not set # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set CONFIG_FONT_10x18=y # # Logo configuration # CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_DEVICE=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_DEVICE=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_HWDEP=y CONFIG_SND_RAWMIDI=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_RTCTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_MPU401_UART=y CONFIG_SND_AC97_CODEC=y CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # ISA devices # # CONFIG_SND_ADLIB is not set # CONFIG_SND_AD1848 is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_MIRO is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # CONFIG_SND_WAVEFRONT is not set # # PCI devices # # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set CONFIG_SND_BT87X=y # CONFIG_SND_BT87X_OVERCLOCK is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5535AUDIO is not set CONFIG_SND_EMU10K1=y # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set CONFIG_SND_ENS1371=y # CONFIG_SND_ES1938 is not set CONFIG_SND_ES1968=y # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=y # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set CONFIG_SND_MAESTRO3=y # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set CONFIG_SND_VIA82XX=y # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # # USB devices # CONFIG_SND_USB_AUDIO=y # CONFIG_SND_USB_USX2Y is not set # # PCMCIA devices # # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=y CONFIG_USB_PRINTER=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Network Adapters # CONFIG_USB_CATC=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set CONFIG_USB_USBNET=y CONFIG_USB_NET_AX8817X=y CONFIG_USB_NET_CDCETHER=y # CONFIG_USB_NET_GL620A is not set CONFIG_USB_NET_NET1080=y # CONFIG_USB_NET_PLUSB is not set # CONFIG_USB_NET_RNDIS_HOST is not set CONFIG_USB_NET_CDC_SUBSET=y # CONFIG_USB_ALI_M5632 is not set # CONFIG_USB_AN2720 is not set CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y # CONFIG_USB_EPSON2888 is not set CONFIG_USB_NET_ZAURUS=y CONFIG_USB_ZD1201=y # CONFIG_USB_MON is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # CONFIG_MMC=y CONFIG_MMC_DEBUG=y CONFIG_MMC_BLOCK=y # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set # # LED devices # # CONFIG_NEW_LEDS is not set # # LED drivers # # # LED Triggers # # # InfiniBand support # # CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # CONFIG_EDAC=y # # Reporting subsystems # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_AMD76X=y # CONFIG_EDAC_E7XXX is not set # CONFIG_EDAC_E752X is not set CONFIG_EDAC_I82875P=y CONFIG_EDAC_I82860=y # CONFIG_EDAC_R82600 is not set CONFIG_EDAC_POLL=y # # Real Time Clock # # CONFIG_RTC_CLASS is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=y CONFIG_NTFS_DEBUG=y # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=y # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set CONFIG_LDM_PARTITION=y CONFIG_LDM_DEBUG=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-2" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y # CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set # CONFIG_PRINTK_IGNORE_LOGLEVEL is not set CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_INFO is not set CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_HIGHMEM=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set # CONFIG_FRAME_POINTER is not set CONFIG_UNWIND_INFO=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_STACK_BACKTRACE_COLS=2 # # Page alloc debug is incompatible with Software Suspend on i386 # # CONFIG_DEBUG_RODATA is not set # CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES_586 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices # # CONFIG_CRYPTO_DEV_PADLOCK is not set # # Library routines # CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_KTIME_SCALAR=y ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-30 18:07 ` Pavel Machek @ 2006-06-30 19:15 ` Thomas Gleixner 2006-06-30 21:09 ` Pavel Machek 0 siblings, 1 reply; 14+ messages in thread From: Thomas Gleixner @ 2006-06-30 19:15 UTC (permalink / raw) To: Pavel Machek Cc: LKML, Ingo Molnar, Andrew Morton, Con Kolivas, Michal Piotrowski On Fri, 2006-06-30 at 20:07 +0200, Pavel Machek wrote: > Hi! > > > > I briefly tested -dyntick5 on my thinkpad, and it seems to work > > > okay... but timer still seems to tick at 250Hz. > > > > > ...am I doing something wrong? > > > > can you send me the bootlog and your .config file please ? > > ...attached. (I do not have to enable anything in sysfs/commandline to > enable noidlehz, right?). Right. You trapped into the no apic on SMP trap. I did not come around to fix that yet. What happens that you don't have lapic on the commandline and BIOS has lapic disabled. Therefor Linux switches to IPI broadcasting if the PIT interrupt, which does not work with idle_hz and highres timer as those are per cpu. I will fix that for SMP kernels which bring up only one CPU. You can work around that for now by either using an UP kernel or enabling local APIC, which is recommended anyway because the APIC timer is faster to access and has longer max time than PIT. > On a related note, swapoff -a, echo disk > /sys/power/state is enough > to kill the machine in timer_resume code with this patch applied. > Pavel Will look into that. Thanks, tglx ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-30 19:15 ` Thomas Gleixner @ 2006-06-30 21:09 ` Pavel Machek 0 siblings, 0 replies; 14+ messages in thread From: Pavel Machek @ 2006-06-30 21:09 UTC (permalink / raw) To: Thomas Gleixner Cc: LKML, Ingo Molnar, Andrew Morton, Con Kolivas, Michal Piotrowski Hi! > > > > I briefly tested -dyntick5 on my thinkpad, and it seems to work > > > > okay... but timer still seems to tick at 250Hz. > > > > > > > ...am I doing something wrong? > > > > > > can you send me the bootlog and your .config file please ? > > > > ...attached. (I do not have to enable anything in sysfs/commandline to > > enable noidlehz, right?). > > Right. > > You trapped into the no apic on SMP trap. I did not come around to fix > that yet. What happens that you don't have lapic on the commandline and > BIOS has lapic disabled. Therefor Linux switches to IPI broadcasting if > the PIT interrupt, which does not work with idle_hz and highres timer as > those are per cpu. I will fix that for SMP kernels which bring up only > one CPU. > > You can work around that for now by either using an UP kernel or > enabling local APIC, which is recommended anyway because the APIC timer > is faster to access and has longer max time than PIT. Thanks, it works okay with UP kernel. Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <fa.lKfxxA+pCJb5tSZbL1XnnrPzaeQ@ifi.uio.no>]
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 [not found] <fa.lKfxxA+pCJb5tSZbL1XnnrPzaeQ@ifi.uio.no> @ 2006-06-23 3:31 ` Robert Hancock 2006-06-23 8:27 ` Thomas Gleixner 0 siblings, 1 reply; 14+ messages in thread From: Robert Hancock @ 2006-06-23 3:31 UTC (permalink / raw) To: tglx; +Cc: LKML, Ingo Molnar, Andrew Morton, Con Kolivas, Michal Piotrowski Thomas Gleixner wrote: > An updated patchset is available from: > > http://www.tglx.de/projects/hrtimers/2.6.17/patch-2.6.17-hrt-dyntick4.patch On my Compaq Presario X1050 laptop running Fedora Core 5 I get: Disabling NO_HZ and high resolution timers due to timer broadcasting Not sure exactly what this is indicating or what's triggered this, but I'm assuming the patch isn't doing much on this machine? Note that the libata PATA patch is also applied. Full dmesg output: Linux version 2.6.17-1.2138_FC5idehrt (rob@localhost.localdomain) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Thu Jun 22 20:52:49 CST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable) BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved) BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS) BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 131024 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126928 pages, LIFO batch:31 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 COMPAQ ) @ 0x000f6560 ACPI: RSDT (v001 HP CPQ0860 0x14070520 CPQ 0x00000001) @ 0x1fff0c84 ACPI: FADT (v002 HP CPQ0860 0x00000002 CPQ 0x00000001) @ 0x1fff0c00 ACPI: SSDT (v001 COMPAQ CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x1fff5c3c ACPI: DSDT (v001 HP nx7000 0x00010000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000) Detected 1395.513 MHz processor. Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0150c000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Event source pit configured with caps set: 07 CPU 0 irqstacks, hard=c079f000 soft=c077f000 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 511860k/524096k available (2101k kernel code, 11540k reserved, 1197k data, 240k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2792.90 BogoMIPS (lpj=5585813) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f1bf 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed ACPI: setting ELCR to 0200 (from 0c20) CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 1665k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [C046] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.C046] bus is 0 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1100-113f claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT] ACPI: Embedded Controller [C0EA] (gpe 28) interrupt mode. ACPI: Power Resource [C18D] (on) ACPI: Power Resource [C195] (on) ACPI: Power Resource [C19C] (on) ACPI: Power Resource [C1A6] (on) ACPI: PCI Interrupt Link [C0C2] (IRQs 5 *10) ACPI: PCI Interrupt Link [C0C3] (IRQs 5 *10) ACPI: PCI Interrupt Link [C0C4] (IRQs *5 10) ACPI: PCI Interrupt Link [C0C5] (IRQs *5 10) ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10) *0, disabled. ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10) *11 ACPI: PCI Interrupt Link [C0C8] (IRQs 5 10) *0, disabled. ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved pnp: 00:0d: ioport range 0x1100-0x113f has been reserved pnp: 00:0d: ioport range 0x1200-0x121f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: 90400000-904fffff PREFETCH window: 98000000-9fffffff PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00002800-000028ff IO window: 00002c00-00002cff PREFETCH window: 30000000-31ffffff MEM window: 34000000-35ffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: 90000000-903fffff PREFETCH window: 30000000-31ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 327680 bytes) TCP bind hash table entries: 8192 (order: 5, 163840 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1151010952.896:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Disabling NO_HZ and high resolution timers due to timer broadcasting ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: AGP aperture is 256M @ 0xb0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize libata version 1.20 loaded. ata_piix 0000:00:1f.1: version 1.05-ac7 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x4C40 irq 14 ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6003 85:3c69 86:3e01 87:6003 88:203f ata1: dev 0 ATA-7, max UDMA/100, 156368016 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix Vendor: ATA Model: SAMSUNG MP0804H Rev: UE20 Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4C48 irq 15 ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix Vendor: QSI Model: CDRW/DVD SBW-241 Rev: VH04 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 Yenta: CardBus bridge found at 0000:02:04.0 [0e11:0860] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x001c1112, devctl 0x44 Yenta: ISA IRQ mask 0x08d8, PCI irq 5 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff cs: IO port probe 0x2000-0x2fff: clean. pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:C1A3,PNP0f13:C1A4] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI wakeup devices: C058 C1AD C1A3 C1A4 C0AC C0B3 C0B4 C0B5 C0E7 C136 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 240k freed Write protecting the kernel read-only data: 737k Time: tsc clocksource has been installed. Time: acpi_pm clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008 input: SynPS/2 Synaptics TouchPad as /class/input/input1 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: dm-0: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 1828034 ext3_orphan_cleanup: deleting unreferenced inode 1828031 EXT3-fs: dm-0: 2 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. audit(1151010980.709:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1417 types, 151 bools, 1 sens, 256 cats security: 57 classes, 41080 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1151010981.037:3): policy loaded auid=4294967295 SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts hw_random: cannot enable RNG, aborting ieee80211_crypt: registered algorithm 'NULL' 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 eth0: RTL-8139C+ at 0xe0834000, 00:02:3f:65:4d:74, IRQ 10 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.1.1 ipw2200: Copyright(c) 2003-2006 Intel Corporation intel8x0_measure_ac97_clock: measured 55019 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.6 to 64 ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 5 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [C0C5] -> GSI 5 (level, low) -> IRQ 5 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection cs: IO port probe 0x100-0x3af: excluding 0x140-0x14f 0x200-0x20f 0x370-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Floppy drive(s): fd0 is 1.44M USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 10, io base 0x000048c0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0C5] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 5, io base 0x000048e0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 5, io base 0x00004c00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ieee1394: Initialized config rom entry `ip1394' ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [C0C9] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 5, io mem 0xa0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[90200000-902007ff] Max Packet=[2048] IR/IT contexts=[4/8] floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f383800c298] floppy0: no floppy controllers found parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready ACPI: AC Adapter [C134] (on-line) ACPI: Battery Slot [C11F] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [C1BE] ACPI: Lid Switch [C136] ibm_acpi: ec object not found ACPI: Video Device [C0D0] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS volume version 3.1. SELinux: initialized (dev sda1, type ntfs), uses genfs_contexts Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1048568k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (4094 buckets, 32752 max) - 224 bytes per conntrack eth0: link down SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): eth1: link is not ready [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 [drm] Initialized radeon 1.24.0 20060225 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 2 usecs ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready ieee80211_crypt: registered algorithm 'CCMP' eth1: no IPv6 routers present -- Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from hancockr@nospamshaw.ca Home Page: http://www.roberthancock.com/ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-23 3:31 ` Robert Hancock @ 2006-06-23 8:27 ` Thomas Gleixner 2006-06-23 8:26 ` Ingo Molnar 2006-06-24 0:51 ` Robert Hancock 0 siblings, 2 replies; 14+ messages in thread From: Thomas Gleixner @ 2006-06-23 8:27 UTC (permalink / raw) To: Robert Hancock Cc: LKML, Ingo Molnar, Andrew Morton, Con Kolivas, Michal Piotrowski On Thu, 2006-06-22 at 21:31 -0600, Robert Hancock wrote: > Thomas Gleixner wrote: > > An updated patchset is available from: > > > > http://www.tglx.de/projects/hrtimers/2.6.17/patch-2.6.17-hrt-dyntick4.patch > > On my Compaq Presario X1050 laptop running Fedora Core 5 I get: > > Disabling NO_HZ and high resolution timers due to timer broadcasting > > Not sure exactly what this is indicating or what's triggered this, but > I'm assuming the patch isn't doing much on this machine? The system is configured for SMP, but this is an UP machine and the APIC is disabled in the BIOS. Linux uses then the PIT and an IPI mechanism to broadcast timer events. We need to do the event reprogramming per CPU, so we switch off in that situation. Solution: Either use an UP kernel, or enable Local APIC in the BIOS (is not possible in most BIOSes), or add "lapic" to the kernel command line. Also for an UP kernel adding "lapic" to the commandline is good, as the APIC is faster accessible than the PIT. tglx ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-23 8:27 ` Thomas Gleixner @ 2006-06-23 8:26 ` Ingo Molnar 2006-06-23 14:17 ` Robert Hancock 2006-06-24 0:51 ` Robert Hancock 1 sibling, 1 reply; 14+ messages in thread From: Ingo Molnar @ 2006-06-23 8:26 UTC (permalink / raw) To: Thomas Gleixner Cc: Robert Hancock, LKML, Andrew Morton, Con Kolivas, Michal Piotrowski * Thomas Gleixner <tglx@timesys.com> wrote: > > Disabling NO_HZ and high resolution timers due to timer broadcasting > > > > Not sure exactly what this is indicating or what's triggered this, but > > I'm assuming the patch isn't doing much on this machine? > > The system is configured for SMP, but this is an UP machine and the > APIC is disabled in the BIOS. Linux uses then the PIT and an IPI > mechanism to broadcast timer events. We need to do the event > reprogramming per CPU, so we switch off in that situation. hm, we should update the message to be less cryptic. Something like: 'Disabling NO_HZ and high resolution timers due to no APIC' and in this particular case we should also finetune the condition a bit and make it conditional on the number of CPUs. I.e. if someone boots an SMP kernel on a UP box we should still allow the PIT. (there wont be any broadcasting done) [the only exception would be if CONFIG_HOTPLUG_CPU is specified - in that case we cannot be sure whether a new CPU will be plugged in or not] Ingo ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-23 8:26 ` Ingo Molnar @ 2006-06-23 14:17 ` Robert Hancock 0 siblings, 0 replies; 14+ messages in thread From: Robert Hancock @ 2006-06-23 14:17 UTC (permalink / raw) To: Ingo Molnar Cc: Thomas Gleixner, LKML, Andrew Morton, Con Kolivas, Michal Piotrowski Ingo Molnar wrote: > * Thomas Gleixner <tglx@timesys.com> wrote: > >>> Disabling NO_HZ and high resolution timers due to timer broadcasting >>> >>> Not sure exactly what this is indicating or what's triggered this, but >>> I'm assuming the patch isn't doing much on this machine? >> The system is configured for SMP, but this is an UP machine and the >> APIC is disabled in the BIOS. Linux uses then the PIT and an IPI >> mechanism to broadcast timer events. We need to do the event >> reprogramming per CPU, so we switch off in that situation. > > hm, we should update the message to be less cryptic. Something like: > > 'Disabling NO_HZ and high resolution timers due to no APIC' > > and in this particular case we should also finetune the condition a bit > and make it conditional on the number of CPUs. I.e. if someone boots an > SMP kernel on a UP box we should still allow the PIT. (there wont be any > broadcasting done) [the only exception would be if CONFIG_HOTPLUG_CPU is > specified - in that case we cannot be sure whether a new CPU will be > plugged in or not] Yes, I would say that this case should be handled better, considering this configuration is the default one for Fedora kernels, for one.. -- Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from hancockr@nospamshaw.ca Home Page: http://www.roberthancock.com/ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-23 8:27 ` Thomas Gleixner 2006-06-23 8:26 ` Ingo Molnar @ 2006-06-24 0:51 ` Robert Hancock 2006-06-24 1:09 ` Con Kolivas 1 sibling, 1 reply; 14+ messages in thread From: Robert Hancock @ 2006-06-24 0:51 UTC (permalink / raw) To: tglx; +Cc: LKML, Ingo Molnar, Andrew Morton, Con Kolivas, Michal Piotrowski Thomas Gleixner wrote: > On Thu, 2006-06-22 at 21:31 -0600, Robert Hancock wrote: >> Thomas Gleixner wrote: >>> An updated patchset is available from: >>> >>> http://www.tglx.de/projects/hrtimers/2.6.17/patch-2.6.17-hrt-dyntick4.patch >> On my Compaq Presario X1050 laptop running Fedora Core 5 I get: >> >> Disabling NO_HZ and high resolution timers due to timer broadcasting >> >> Not sure exactly what this is indicating or what's triggered this, but >> I'm assuming the patch isn't doing much on this machine? > > The system is configured for SMP, but this is an UP machine and the APIC > is disabled in the BIOS. Linux uses then the PIT and an IPI mechanism to > broadcast timer events. We need to do the event reprogramming per CPU, > so we switch off in that situation. > > Solution: Either use an UP kernel, or enable Local APIC in the BIOS (is > not possible in most BIOSes), or add "lapic" to the kernel command line. > > Also for an UP kernel adding "lapic" to the commandline is good, as the > APIC is faster accessible than the PIT. Tried that, still no dice: Kernel command line: ro root=/dev/VolGroup00/LogVol00 lapic Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! ... Disabling NO_HZ and high resolution timers due to timer broadcasting This isn't a viable solution for all machines anyway - some laptops disable the local APIC and the BIOS expects it to remain that way, and blows up if it gets turned on. I also saw a problem with suspend-to-disk, it locked up the machine. The screen was already blanked so I couldn't tell if there was any output. It could be the libata PATA patch as well, I'm building a new kernel without the hrt patch now to try it.. Full output: Linux version 2.6.17-1.2138_FC5idehrt (rob@localhost.localdomain) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Thu Jun 22 20:52:49 CST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable) BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved) BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS) BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 131024 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126928 pages, LIFO batch:31 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 COMPAQ ) @ 0x000f6560 ACPI: RSDT (v001 HP CPQ0860 0x14070520 CPQ 0x00000001) @ 0x1fff0c84 ACPI: FADT (v002 HP CPQ0860 0x00000002 CPQ 0x00000001) @ 0x1fff0c00 ACPI: SSDT (v001 COMPAQ CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x1fff5c3c ACPI: DSDT (v001 HP nx7000 0x00010000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000) Detected 598.093 MHz processor. Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 lapic Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Event source pit configured with caps set: 07 CPU 0 irqstacks, hard=c079f000 soft=c077f000 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 511860k/524096k available (2101k kernel code, 11536k reserved, 1197k data, 240k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1197.22 BogoMIPS (lpj=2394455) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f3bf 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed ACPI: setting ELCR to 0200 (from 0c20) CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05 SMP motherboard not detected. lapic max_delta_ns: 1346559260 Event source pit new caps set: 01 Event source lapic configured with caps set: 06 Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 1665k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [C046] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.C046] bus is 0 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1100-113f claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT] ACPI: Embedded Controller [C0EA] (gpe 28) interrupt mode. ACPI: Power Resource [C18D] (on) ACPI: Power Resource [C195] (on) ACPI: Power Resource [C19C] (on) ACPI: Power Resource [C1A6] (on) ACPI: PCI Interrupt Link [C0C2] (IRQs 5 *10) ACPI: PCI Interrupt Link [C0C3] (IRQs 5 *10) ACPI: PCI Interrupt Link [C0C4] (IRQs *5 10) ACPI: PCI Interrupt Link [C0C5] (IRQs *5 10) ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10) *0, disabled. ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10) *11 ACPI: PCI Interrupt Link [C0C8] (IRQs 5 10) *0, disabled. ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved pnp: 00:0d: ioport range 0x1100-0x113f has been reserved pnp: 00:0d: ioport range 0x1200-0x121f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: 90400000-904fffff PREFETCH window: 98000000-9fffffff PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00002800-000028ff IO window: 00002c00-00002cff PREFETCH window: 30000000-31ffffff MEM window: 34000000-35ffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: 90000000-903fffff PREFETCH window: 30000000-31ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 327680 bytes) TCP bind hash table entries: 8192 (order: 5, 163840 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1151088082.560:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Disabling NO_HZ and high resolution timers due to timer broadcasting ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: AGP aperture is 256M @ 0xb0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize libata version 1.20 loaded. ata_piix 0000:00:1f.1: version 1.05-ac7 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x4C40 irq 14 ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6003 85:3c69 86:3e01 87:6003 88:203f ata1: dev 0 ATA-7, max UDMA/100, 156368016 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix Vendor: ATA Model: SAMSUNG MP0804H Rev: UE20 Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4C48 irq 15 ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix Vendor: QSI Model: CDRW/DVD SBW-241 Rev: VH04 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 Yenta: CardBus bridge found at 0000:02:04.0 [0e11:0860] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x001c1112, devctl 0x44 Yenta: ISA IRQ mask 0x08d8, PCI irq 5 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff cs: IO port probe 0x2000-0x2fff: clean. pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:C1A3,PNP0f13:C1A4] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI wakeup devices: C058 C1AD C1A3 C1A4 C0AC C0B3 C0B4 C0B5 C0E7 C136 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 240k freed Write protecting the kernel read-only data: 737k Time: tsc clocksource has been installed. Time: acpi_pm clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008 input: SynPS/2 Synaptics TouchPad as /class/input/input1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1151088086.844:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1417 types, 151 bools, 1 sens, 256 cats security: 57 classes, 41080 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1151088087.316:3): policy loaded auid=4294967295 SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts hw_random: cannot enable RNG, aborting ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.6 to 64 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 54449 usecs intel8x0: clocking to 48000 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 eth0: RTL-8139C+ at 0xe0926000, 00:02:3f:65:4d:74, IRQ 10 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.1.1 ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 5 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [C0C5] -> GSI 5 (level, low) -> IRQ 5 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection cs: IO port probe 0x100-0x3af: excluding 0x140-0x14f 0x200-0x20f 0x370-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. Floppy drive(s): fd0 is 1.44M sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 10, io base 0x000048c0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0C5] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 5, io base 0x000048e0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 5, io base 0x00004c00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ieee1394: Initialized config rom entry `ip1394' floppy0: no floppy controllers found ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [C0C9] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 5, io mem 0xa0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[90200000-902007ff] Max Packet=[2048] IR/IT contexts=[4/8] Floppy drive(s): fd0 is 1.44M ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f383800c298] floppy0: no floppy controllers found parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready ACPI: AC Adapter [C134] (off-line) ACPI: Battery Slot [C11F] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [C1BE] ACPI: Lid Switch [C136] ibm_acpi: ec object not found ACPI: Video Device [C0D0] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS volume version 3.1. NTFS-fs error (device sda1): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows. SELinux: initialized (dev sda1, type ntfs), uses genfs_contexts Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1048568k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (4094 buckets, 32752 max) - 224 bytes per conntrack eth0: link down SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full. [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 [drm] Initialized radeon 1.24.0 20060225 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready ieee80211_crypt: registered algorithm 'CCMP' eth1: no IPv6 routers present usb 4-2: new high speed USB device using ehci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. Vendor: Kingston Model: DT Elite HS 2.0 Rev: 5.02 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 2052607 512-byte hdwr sectors (1051 MB) sdb: Write Protect is off sdb: Mode Sense: 45 00 00 08 sdb: assuming drive cache: write through SCSI device sdb: 2052607 512-byte hdwr sectors (1051 MB) sdb: Write Protect is off sdb: Mode Sense: 45 00 00 08 sdb: assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-24 0:51 ` Robert Hancock @ 2006-06-24 1:09 ` Con Kolivas 2006-06-24 1:15 ` Con Kolivas 0 siblings, 1 reply; 14+ messages in thread From: Con Kolivas @ 2006-06-24 1:09 UTC (permalink / raw) To: linux-kernel Cc: Robert Hancock, tglx, Ingo Molnar, Andrew Morton, Michal Piotrowski On Saturday 24 June 2006 10:51, Robert Hancock wrote: > Thomas Gleixner wrote: > > On Thu, 2006-06-22 at 21:31 -0600, Robert Hancock wrote: > >> Thomas Gleixner wrote: > >>> An updated patchset is available from: > >>> > >>> http://www.tglx.de/projects/hrtimers/2.6.17/patch-2.6.17-hrt-dyntick4.p > >>>atch > >> > >> On my Compaq Presario X1050 laptop running Fedora Core 5 I get: > >> > >> Disabling NO_HZ and high resolution timers due to timer broadcasting > >> > >> Not sure exactly what this is indicating or what's triggered this, but > >> I'm assuming the patch isn't doing much on this machine? > > > > The system is configured for SMP, but this is an UP machine and the APIC > > is disabled in the BIOS. Linux uses then the PIT and an IPI mechanism to > > broadcast timer events. We need to do the event reprogramming per CPU, > > so we switch off in that situation. > > > > Solution: Either use an UP kernel, or enable Local APIC in the BIOS (is > > not possible in most BIOSes), or add "lapic" to the kernel command line. > > > > Also for an UP kernel adding "lapic" to the commandline is good, as the > > APIC is faster accessible than the PIT. > > Tried that, still no dice: > > Kernel command line: ro root=/dev/VolGroup00/LogVol00 lapic > Local APIC disabled by BIOS -- reenabling. > Found and enabled local APIC! > > ... > > Disabling NO_HZ and high resolution timers due to timer broadcasting > > This isn't a viable solution for all machines anyway - some laptops > disable the local APIC and the BIOS expects it to remain that way, and > blows up if it gets turned on. One thing I did discover with my dynticks was that APIC on UP i386 was nigh on broken for the most part. Virtually all BIOSs disable it and even if you force enable it you may have to play with enable_timer_pin to get it to work (sometimes 1, sometimes 0) and there was no pattern to when it would be required since the BIOS manufacturer cared not. This is why for UP I disabled APIC when dynticks was enabled, and would test for one online cpu on SMP and do the same. This obviously isn't a solution when cpu hotplug is enabled and only one cpu is online. -- -ck ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 2006-06-24 1:09 ` Con Kolivas @ 2006-06-24 1:15 ` Con Kolivas 0 siblings, 0 replies; 14+ messages in thread From: Con Kolivas @ 2006-06-24 1:15 UTC (permalink / raw) To: linux-kernel Cc: Robert Hancock, tglx, Ingo Molnar, Andrew Morton, Michal Piotrowski On Saturday 24 June 2006 11:09, Con Kolivas wrote: > On Saturday 24 June 2006 10:51, Robert Hancock wrote: > > Thomas Gleixner wrote: > > > On Thu, 2006-06-22 at 21:31 -0600, Robert Hancock wrote: > > >> Thomas Gleixner wrote: > > >>> An updated patchset is available from: > > >>> > > >>> http://www.tglx.de/projects/hrtimers/2.6.17/patch-2.6.17-hrt-dyntick4 > > >>>.p atch > > >> > > >> On my Compaq Presario X1050 laptop running Fedora Core 5 I get: > > >> > > >> Disabling NO_HZ and high resolution timers due to timer broadcasting > > >> > > >> Not sure exactly what this is indicating or what's triggered this, but > > >> I'm assuming the patch isn't doing much on this machine? > > > > > > The system is configured for SMP, but this is an UP machine and the > > > APIC is disabled in the BIOS. Linux uses then the PIT and an IPI > > > mechanism to broadcast timer events. We need to do the event > > > reprogramming per CPU, so we switch off in that situation. > > > > > > Solution: Either use an UP kernel, or enable Local APIC in the BIOS (is > > > not possible in most BIOSes), or add "lapic" to the kernel command > > > line. > > > > > > Also for an UP kernel adding "lapic" to the commandline is good, as the > > > APIC is faster accessible than the PIT. > > > > Tried that, still no dice: > > > > Kernel command line: ro root=/dev/VolGroup00/LogVol00 lapic > > Local APIC disabled by BIOS -- reenabling. > > Found and enabled local APIC! > > > > ... > > > > Disabling NO_HZ and high resolution timers due to timer broadcasting > > > > This isn't a viable solution for all machines anyway - some laptops > > disable the local APIC and the BIOS expects it to remain that way, and > > blows up if it gets turned on. > > One thing I did discover with my dynticks was that APIC on UP i386 was nigh > on broken for the most part. Virtually all BIOSs disable it and even if you > force enable it you may have to play with enable_timer_pin to get it to > work (sometimes 1, sometimes 0) and there was no pattern to when it would > be required since the BIOS manufacturer cared not. This is why for UP I > disabled APIC when dynticks was enabled, and would test for one online cpu > on SMP and do the same. This obviously isn't a solution when cpu hotplug is > enabled and only one cpu is online. That was enable_timer_pin_1 and disable_timer_pin_1 sorry. -- -ck ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2006-06-30 21:09 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-06-19 20:06 [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 Thomas Gleixner
2006-06-20 14:51 ` Michal Piotrowski
2006-06-29 17:48 ` Pavel Machek
2006-06-29 19:03 ` Thomas Gleixner
2006-06-30 18:07 ` Pavel Machek
2006-06-30 19:15 ` Thomas Gleixner
2006-06-30 21:09 ` Pavel Machek
[not found] <fa.lKfxxA+pCJb5tSZbL1XnnrPzaeQ@ifi.uio.no>
2006-06-23 3:31 ` Robert Hancock
2006-06-23 8:27 ` Thomas Gleixner
2006-06-23 8:26 ` Ingo Molnar
2006-06-23 14:17 ` Robert Hancock
2006-06-24 0:51 ` Robert Hancock
2006-06-24 1:09 ` Con Kolivas
2006-06-24 1:15 ` Con Kolivas
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).