* [PATCH 1/2] ARM: dts: omap: add *reg* property for ocp2scp
2012-09-19 10:32 [PATCH 0/2] ARM: dts: Add subnode for ocp2scp Kishon Vijay Abraham I
@ 2012-09-19 10:32 ` Kishon Vijay Abraham I
2012-09-19 10:32 ` [PATCH 2/2] ARM: dts: omap: Add omap-usb2 dt data Kishon Vijay Abraham I
2012-09-20 3:26 ` [PATCH 0/2] ARM: dts: Add subnode for ocp2scp Benoit Cousson
2 siblings, 0 replies; 9+ messages in thread
From: Kishon Vijay Abraham I @ 2012-09-19 10:32 UTC (permalink / raw)
To: grant.likely, rob.herring, rob, linux, kishon, arnd, balbi,
b-cousson, tony, devicetree-discuss, linux-doc, linux-kernel,
linux-arm-kernel
*reg* property for ocp2scp was previously obtained from ti,hwmods property.
But that is now explicitly added to the dt node. Also updated the
documentation with *reg* info.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/bus/omap-ocp2scp.txt | 14 ++++++++++++++
arch/arm/boot/dts/omap4.dtsi | 3 ++-
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
index d2fe064..1d5f203 100644
--- a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -2,9 +2,23 @@
properties:
- compatible : Should be "ti,omap-ocp2scp"
+- reg : Address and length of the register set for the device
- #address-cells, #size-cells : Must be present if the device has sub-nodes
- ranges : the child address space are mapped 1:1 onto the parent address space
- ti,hwmods : must be "ocp2scp_usb_phy"
Sub-nodes:
All the devices connected to ocp2scp are described using sub-node to ocp2scp
+
+ocp2scp@4a0ad000 {
+ compatible = "ti,omap-ocp2scp";
+ reg = <0x4a0ad000 0x1f>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp_usb_phy";
+ subnode1 {
+ };
+ subnode2 {
+ };
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 8a780b2..4fbb9dc 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -296,8 +296,9 @@
ti,hwmods = "dmic";
};
- ocp2scp {
+ ocp2scp@4a0ad000 {
compatible = "ti,omap-ocp2scp";
+ reg = <0x4a0ad000 0x1f>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/2] ARM: dts: omap: Add omap-usb2 dt data
2012-09-19 10:32 [PATCH 0/2] ARM: dts: Add subnode for ocp2scp Kishon Vijay Abraham I
2012-09-19 10:32 ` [PATCH 1/2] ARM: dts: omap: add *reg* property " Kishon Vijay Abraham I
@ 2012-09-19 10:32 ` Kishon Vijay Abraham I
2013-01-10 9:31 ` kishon
2012-09-20 3:26 ` [PATCH 0/2] ARM: dts: Add subnode for ocp2scp Benoit Cousson
2 siblings, 1 reply; 9+ messages in thread
From: Kishon Vijay Abraham I @ 2012-09-19 10:32 UTC (permalink / raw)
To: grant.likely, rob.herring, rob, linux, kishon, arnd, balbi,
b-cousson, tony, devicetree-discuss, linux-doc, linux-kernel,
linux-arm-kernel
Add omap-usb2 data node in omap4 device tree file. Since omap-usb2 is
connected to ocp2scp, omap-usb2 dt data is added as a child node
of ocp2scp.
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/omap4.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 4fbb9dc..28eaddc 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -303,6 +303,11 @@
#size-cells = <1>;
ranges;
ti,hwmods = "ocp2scp_usb_phy";
+ usb2phy@4a0ad080 {
+ compatible = "ti,omap-usb2";
+ reg = <0x4a0ad080 0x58>,
+ <0x4a002300 0x4>; /* TO BE REMOVED: SCM */
+ };
};
};
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH 2/2] ARM: dts: omap: Add omap-usb2 dt data
2012-09-19 10:32 ` [PATCH 2/2] ARM: dts: omap: Add omap-usb2 dt data Kishon Vijay Abraham I
@ 2013-01-10 9:31 ` kishon
2013-01-10 10:04 ` Benoit Cousson
0 siblings, 1 reply; 9+ messages in thread
From: kishon @ 2013-01-10 9:31 UTC (permalink / raw)
To: Kishon Vijay Abraham I, b-cousson
Cc: grant.likely, rob.herring, rob, linux, arnd, balbi, tony,
devicetree-discuss, linux-doc, linux-kernel, linux-arm-kernel
Hi Benoit,
On Wednesday 19 September 2012 04:02 PM, Kishon Vijay Abraham I wrote:
> Add omap-usb2 data node in omap4 device tree file. Since omap-usb2 is
> connected to ocp2scp, omap-usb2 dt data is added as a child node
> of ocp2scp.
>
> Acked-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This patch is also missing in mainline :-(
Thanks
Kishon
> ---
> arch/arm/boot/dts/omap4.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 4fbb9dc..28eaddc 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -303,6 +303,11 @@
> #size-cells = <1>;
> ranges;
> ti,hwmods = "ocp2scp_usb_phy";
> + usb2phy@4a0ad080 {
> + compatible = "ti,omap-usb2";
> + reg = <0x4a0ad080 0x58>,
> + <0x4a002300 0x4>; /* TO BE REMOVED: SCM */
> + };
> };
> };
> };
>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH 2/2] ARM: dts: omap: Add omap-usb2 dt data
2013-01-10 9:31 ` kishon
@ 2013-01-10 10:04 ` Benoit Cousson
2013-01-10 10:16 ` kishon
0 siblings, 1 reply; 9+ messages in thread
From: Benoit Cousson @ 2013-01-10 10:04 UTC (permalink / raw)
To: kishon
Cc: grant.likely, rob.herring, rob, linux, arnd, balbi, tony,
devicetree-discuss, linux-doc, linux-kernel, linux-arm-kernel
On 01/10/2013 10:31 AM, kishon wrote:
> Hi Benoit,
>
> On Wednesday 19 September 2012 04:02 PM, Kishon Vijay Abraham I wrote:
>> Add omap-usb2 data node in omap4 device tree file. Since omap-usb2 is
>> connected to ocp2scp, omap-usb2 dt data is added as a child node
>> of ocp2scp.
>>
>> Acked-by: Felipe Balbi <balbi@ti.com>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>
> This patch is also missing in mainline :-(
Well, in that case this was done on purpose :-)
>
> Thanks
> Kishon
>
>> ---
>> arch/arm/boot/dts/omap4.dtsi | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>> index 4fbb9dc..28eaddc 100644
>> --- a/arch/arm/boot/dts/omap4.dtsi
>> +++ b/arch/arm/boot/dts/omap4.dtsi
>> @@ -303,6 +303,11 @@
>> #size-cells = <1>;
>> ranges;
>> ti,hwmods = "ocp2scp_usb_phy";
>> + usb2phy@4a0ad080 {
>> + compatible = "ti,omap-usb2";
>> + reg = <0x4a0ad080 0x58>,
>> + <0x4a002300 0x4>; /* TO BE REMOVED: SCM */
Rob and I did not agree to use that temp hack in the case of DT, so you
were supposed to repost with a proper driver for the SCM part that
control the USB.
Regards,
Benoit
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH 2/2] ARM: dts: omap: Add omap-usb2 dt data
2013-01-10 10:04 ` Benoit Cousson
@ 2013-01-10 10:16 ` kishon
2013-01-10 12:45 ` Felipe Balbi
0 siblings, 1 reply; 9+ messages in thread
From: kishon @ 2013-01-10 10:16 UTC (permalink / raw)
To: Benoit Cousson
Cc: grant.likely, rob.herring, rob, linux, arnd, balbi, tony,
devicetree-discuss, linux-doc, linux-kernel, linux-arm-kernel
Hi,
On Thursday 10 January 2013 03:34 PM, Benoit Cousson wrote:
> On 01/10/2013 10:31 AM, kishon wrote:
>> Hi Benoit,
>>
>> On Wednesday 19 September 2012 04:02 PM, Kishon Vijay Abraham I wrote:
>>> Add omap-usb2 data node in omap4 device tree file. Since omap-usb2 is
>>> connected to ocp2scp, omap-usb2 dt data is added as a child node
>>> of ocp2scp.
>>>
>>> Acked-by: Felipe Balbi <balbi@ti.com>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>
>> This patch is also missing in mainline :-(
>
> Well, in that case this was done on purpose :-)
>
>>
>> Thanks
>> Kishon
>>
>>> ---
>>> arch/arm/boot/dts/omap4.dtsi | 5 +++++
>>> 1 file changed, 5 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>>> index 4fbb9dc..28eaddc 100644
>>> --- a/arch/arm/boot/dts/omap4.dtsi
>>> +++ b/arch/arm/boot/dts/omap4.dtsi
>>> @@ -303,6 +303,11 @@
>>> #size-cells = <1>;
>>> ranges;
>>> ti,hwmods = "ocp2scp_usb_phy";
>>> + usb2phy@4a0ad080 {
>>> + compatible = "ti,omap-usb2";
>>> + reg = <0x4a0ad080 0x58>,
>>> + <0x4a002300 0x4>; /* TO BE REMOVED: SCM */
>
> Rob and I did not agree to use that temp hack in the case of DT, so you
> were supposed to repost with a proper driver for the SCM part that
> control the USB.
Ok. Missed that. Will work on that.
Thanks
Kishon
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH 2/2] ARM: dts: omap: Add omap-usb2 dt data
2013-01-10 10:16 ` kishon
@ 2013-01-10 12:45 ` Felipe Balbi
2013-01-10 18:35 ` Tony Lindgren
0 siblings, 1 reply; 9+ messages in thread
From: Felipe Balbi @ 2013-01-10 12:45 UTC (permalink / raw)
To: kishon
Cc: Benoit Cousson, grant.likely, rob.herring, rob, linux, arnd,
balbi, tony, devicetree-discuss, linux-doc, linux-kernel,
linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 1683 bytes --]
On Thu, Jan 10, 2013 at 03:46:55PM +0530, kishon wrote:
> Hi,
>
> On Thursday 10 January 2013 03:34 PM, Benoit Cousson wrote:
> >On 01/10/2013 10:31 AM, kishon wrote:
> >>Hi Benoit,
> >>
> >>On Wednesday 19 September 2012 04:02 PM, Kishon Vijay Abraham I wrote:
> >>>Add omap-usb2 data node in omap4 device tree file. Since omap-usb2 is
> >>>connected to ocp2scp, omap-usb2 dt data is added as a child node
> >>>of ocp2scp.
> >>>
> >>>Acked-by: Felipe Balbi <balbi@ti.com>
> >>>Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> >>
> >>This patch is also missing in mainline :-(
> >
> >Well, in that case this was done on purpose :-)
> >
> >>
> >>Thanks
> >>Kishon
> >>
> >>>---
> >>> arch/arm/boot/dts/omap4.dtsi | 5 +++++
> >>> 1 file changed, 5 insertions(+)
> >>>
> >>>diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> >>>index 4fbb9dc..28eaddc 100644
> >>>--- a/arch/arm/boot/dts/omap4.dtsi
> >>>+++ b/arch/arm/boot/dts/omap4.dtsi
> >>>@@ -303,6 +303,11 @@
> >>> #size-cells = <1>;
> >>> ranges;
> >>> ti,hwmods = "ocp2scp_usb_phy";
> >>>+ usb2phy@4a0ad080 {
> >>>+ compatible = "ti,omap-usb2";
> >>>+ reg = <0x4a0ad080 0x58>,
> >>>+ <0x4a002300 0x4>; /* TO BE REMOVED: SCM */
> >
> >Rob and I did not agree to use that temp hack in the case of DT, so you
> >were supposed to repost with a proper driver for the SCM part that
> >control the USB.
>
> Ok. Missed that. Will work on that.
Didn't Tony say we should access SCM directly since it's a one time
thing ?
Tony ?
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH 2/2] ARM: dts: omap: Add omap-usb2 dt data
2013-01-10 12:45 ` Felipe Balbi
@ 2013-01-10 18:35 ` Tony Lindgren
0 siblings, 0 replies; 9+ messages in thread
From: Tony Lindgren @ 2013-01-10 18:35 UTC (permalink / raw)
To: Felipe Balbi
Cc: kishon, Benoit Cousson, grant.likely, rob.herring, rob, linux,
arnd, devicetree-discuss, linux-doc, linux-kernel,
linux-arm-kernel
* Felipe Balbi <balbi@ti.com> [130110 04:49]:
> On Thu, Jan 10, 2013 at 03:46:55PM +0530, kishon wrote:
> > On Thursday 10 January 2013 03:34 PM, Benoit Cousson wrote:
> > >
> > >Rob and I did not agree to use that temp hack in the case of DT, so you
> > >were supposed to repost with a proper driver for the SCM part that
> > >control the USB.
> >
> > Ok. Missed that. Will work on that.
>
> Didn't Tony say we should access SCM directly since it's a one time
> thing ?
>
> Tony ?
The SCM parts should be a separate driver that eventually will be
a child of the minimal SCM core driver. The reason why it should be
separate is because the SCM registers are in a different block as
pointed out by Paul.
There's a good chance that we'll be able to eventually handle the USB
SCM registers directly via pinctrl-single.c using pinconf-bits + generic
pinconf binding. That is pending the changes from Haojian to implement
generic pinconf for pinctrl-single.c.
As the USB SCM registers can get quite complex, I suggest creating a
minimal driver to handle that, and then eventually that driver might
just use the generic pinconf API for setting the SCM registers for
things like bias voltage, pulls and comparators.
Regards,
Tony
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 0/2] ARM: dts: Add subnode for ocp2scp
2012-09-19 10:32 [PATCH 0/2] ARM: dts: Add subnode for ocp2scp Kishon Vijay Abraham I
2012-09-19 10:32 ` [PATCH 1/2] ARM: dts: omap: add *reg* property " Kishon Vijay Abraham I
2012-09-19 10:32 ` [PATCH 2/2] ARM: dts: omap: Add omap-usb2 dt data Kishon Vijay Abraham I
@ 2012-09-20 3:26 ` Benoit Cousson
2 siblings, 0 replies; 9+ messages in thread
From: Benoit Cousson @ 2012-09-20 3:26 UTC (permalink / raw)
To: Kishon Vijay Abraham I, tony
Cc: grant.likely, rob.herring, rob, linux, arnd, balbi,
devicetree-discuss, linux-doc, linux-kernel, linux-arm-kernel
Hi Tony,
On 09/19/2012 12:32 PM, Kishon Vijay Abraham I wrote:
> This patch series contains a patch to explicitly add reg property
> to the ocp2scp dt node and a patch to add the subnode for ocp2scp
> (omap-usb2).
>
> Since the original patch series that adds ocp2scp driver and ocp2scp
> data are merged in arm-soc, I'm sending this patch series based on the
> same tree.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
>
> But Benoit already pointed out that there's going to be merge conflicts
> as he has sent a bunch of dt data patches to linux-omap (devel-dt) tree.
> So now I'm not sure how that can be actually avoided.
What would you suggest?
I merged arm-soc/drivers/ocp2scp into my dts branch to get a proper base
for that series, but as expected, it conflicts :-(
So I fixed that and pulled this series on top of it.
It is something acceptable for a pull request? We already did that in
the past, but at that time it was not conflicting.
Thanks,
Benoit
^ permalink raw reply [flat|nested] 9+ messages in thread