* [PATCH v3 01/24] tty: Don't change receive_room for ioctl(TIOCSETD)
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 02/24] tty: Simplify tty buffer/ldisc interface with helper function Peter Hurley
` (25 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
tty_set_ldisc() is guaranteed exclusive use of the line discipline
by tty_ldisc_lock_pair_timeout(); shutting off input by resetting
receive_room is unnecessary.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_ldisc.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index ba49c0e..5a6c43d 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -537,9 +537,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
return 0;
}
- /* FIXME: why 'shutoff' input if the ldisc is locked? */
- tty->receive_room = 0;
-
old_ldisc = tty->ldisc;
tty_lock(tty);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 02/24] tty: Simplify tty buffer/ldisc interface with helper function
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
2013-04-15 15:19 ` [PATCH v3 01/24] tty: Don't change receive_room for ioctl(TIOCSETD) Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 03/24] tty: Make ldisc input flow control concurrency-friendly Peter Hurley
` (24 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Ldisc interface functions must be called with interrupts enabled.
Separating the ldisc calls into a helper function simplies the
eventual removal of the spinlock.
Note that access to the buf->head ptr outside the spinlock is
safe here because;
* __tty_buffer_flush() is prevented from running while buffer work
performs i/o,
* tty_buffer_find() only assigns buf->head if the flip buffer list
is empty (which is never the case in flush_to_ldisc() since at
least one buffer is always left in the list after use)
Access to the read index outside the spinlock is safe here for the
same reasons.
Update the buffer's read index _after_ the data has been received
by the ldisc.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 29 +++++++++++++++++------------
1 file changed, 17 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index a42a028..6c7a1d0 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -403,6 +403,18 @@ int tty_prepare_flip_string_flags(struct tty_port *port,
EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
+static int
+receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
+{
+ struct tty_ldisc *disc = tty->ldisc;
+
+ count = min_t(int, count, tty->receive_room);
+ if (count)
+ disc->ops->receive_buf(tty, head->char_buf_ptr + head->read,
+ head->flag_buf_ptr + head->read, count);
+ head->read += count;
+ return count;
+}
/**
* flush_to_ldisc
@@ -438,8 +450,6 @@ static void flush_to_ldisc(struct work_struct *work)
struct tty_buffer *head;
while ((head = buf->head) != NULL) {
int count;
- char *char_buf;
- unsigned char *flag_buf;
count = head->commit - head->read;
if (!count) {
@@ -449,16 +459,10 @@ static void flush_to_ldisc(struct work_struct *work)
tty_buffer_free(port, head);
continue;
}
- if (!tty->receive_room)
- break;
- if (count > tty->receive_room)
- count = tty->receive_room;
- char_buf = head->char_buf_ptr + head->read;
- flag_buf = head->flag_buf_ptr + head->read;
- head->read += count;
spin_unlock_irqrestore(&buf->lock, flags);
- disc->ops->receive_buf(tty, char_buf,
- flag_buf, count);
+
+ count = receive_buf(tty, head, count);
+
spin_lock_irqsave(&buf->lock, flags);
/* Ldisc or user is trying to flush the buffers.
We may have a deferred request to flush the
@@ -469,7 +473,8 @@ static void flush_to_ldisc(struct work_struct *work)
clear_bit(TTYP_FLUSHPENDING, &port->iflags);
wake_up(&tty->read_wait);
break;
- }
+ } else if (!count)
+ break;
}
clear_bit(TTYP_FLUSHING, &port->iflags);
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 03/24] tty: Make ldisc input flow control concurrency-friendly
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
2013-04-15 15:19 ` [PATCH v3 01/24] tty: Don't change receive_room for ioctl(TIOCSETD) Peter Hurley
2013-04-15 15:19 ` [PATCH v3 02/24] tty: Simplify tty buffer/ldisc interface with helper function Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 04/24] n_tty: Factor canonical mode copy from n_tty_read() Peter Hurley
` (23 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Although line discipline receiving is single-producer/single-consumer,
using tty->receive_room to manage flow control creates unnecessary
critical regions requiring additional lock use.
Instead, introduce the optional .receive_buf2() ldisc method which
returns the # of bytes actually received. Serialization is guaranteed
by the caller.
In turn, the line discipline should schedule the buffer work item
whenever space becomes available; ie., when there is room to receive
data and receive_room() previously returned 0 (the buffer work
item stops processing if receive_buf2() returns 0). Note the
'no room' state need not be atomic despite concurrent use by two
threads because only the buffer work thread can set the state and
only the read() thread can clear the state.
Add n_tty_receive_buf2() as the receive_buf2() method for N_TTY.
Provide a public helper function, tty_ldisc_receive_buf(), to use
when directly accessing the receive_buf() methods.
Line disciplines not using input flow control can continue to set
tty->receive_room to a fixed value and only provide the receive_buf()
method.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 72 +++++++++++++++++++++++++++++-----------------
drivers/tty/tty_buffer.c | 13 ++++++---
drivers/tty/vt/selection.c | 4 +--
include/linux/tty.h | 13 +++++++++
include/linux/tty_ldisc.h | 13 +++++++++
5 files changed, 82 insertions(+), 33 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 9b7f571..009518b 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -79,6 +79,9 @@ struct n_tty_data {
unsigned long overrun_time;
int num_overrun;
+ /* non-atomic */
+ bool no_room;
+
unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
unsigned char echo_overrun:1;
@@ -114,25 +117,10 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
return put_user(x, ptr);
}
-/**
- * n_tty_set_room - receive space
- * @tty: terminal
- *
- * Updates tty->receive_room to reflect the currently available space
- * in the input buffer, and re-schedules the flip buffer work if space
- * just became available.
- *
- * Locks: Concurrent update is protected with read_lock
- */
-
-static int set_room(struct tty_struct *tty)
+static int receive_room(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
int left;
- int old_left;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
if (I_PARMRK(tty)) {
/* Multiply read_cnt by 3, since each byte might take up to
@@ -150,18 +138,27 @@ static int set_room(struct tty_struct *tty)
*/
if (left <= 0)
left = ldata->icanon && !ldata->canon_data;
- old_left = tty->receive_room;
- tty->receive_room = left;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
-
- return left && !old_left;
+ return left;
}
+/**
+ * n_tty_set_room - receive space
+ * @tty: terminal
+ *
+ * Re-schedules the flip buffer work if space just became available.
+ *
+ * Locks: Concurrent update is protected with read_lock
+ */
+
static void n_tty_set_room(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
/* Did this open up the receive buffer? We may need to flip */
- if (set_room(tty)) {
+ if (unlikely(ldata->no_room) && receive_room(tty)) {
+ ldata->no_room = 0;
+
WARN_RATELIMIT(tty->port->itty == NULL,
"scheduling with invalid itty\n");
/* see if ldisc has been killed - if so, this means that
@@ -1409,8 +1406,8 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
* calls one at a time and in order (or using flush_to_ldisc)
*/
-static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
- char *fp, int count)
+static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
{
struct n_tty_data *ldata = tty->disc_data;
const unsigned char *p;
@@ -1465,8 +1462,6 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
tty->ops->flush_chars(tty);
}
- set_room(tty);
-
if ((!ldata->icanon && (ldata->read_cnt >= ldata->minimum_to_wake)) ||
L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
@@ -1481,7 +1476,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
*/
while (1) {
tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
- if (tty->receive_room >= TTY_THRESHOLD_THROTTLE)
+ if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE)
break;
if (!tty_throttle_safe(tty))
break;
@@ -1489,6 +1484,28 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
__tty_set_flow_change(tty, 0);
}
+static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ __receive_buf(tty, cp, fp, count);
+}
+
+static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ int room;
+
+ tty->receive_room = room = receive_room(tty);
+ if (!room)
+ ldata->no_room = 1;
+ count = min(count, room);
+ if (count)
+ __receive_buf(tty, cp, fp, count);
+
+ return count;
+}
+
int is_ignored(int sig)
{
return (sigismember(¤t->blocked, sig) ||
@@ -2201,6 +2218,7 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = {
.receive_buf = n_tty_receive_buf,
.write_wakeup = n_tty_write_wakeup,
.fasync = n_tty_fasync,
+ .receive_buf2 = n_tty_receive_buf2,
};
/**
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 6c7a1d0..ff1b2e3 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -407,11 +407,16 @@ static int
receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
{
struct tty_ldisc *disc = tty->ldisc;
+ char *p = head->char_buf_ptr + head->read;
+ unsigned char *f = head->flag_buf_ptr + head->read;
- count = min_t(int, count, tty->receive_room);
- if (count)
- disc->ops->receive_buf(tty, head->char_buf_ptr + head->read,
- head->flag_buf_ptr + head->read, count);
+ if (disc->ops->receive_buf2)
+ count = disc->ops->receive_buf2(tty, p, f, count);
+ else {
+ count = min_t(int, count, tty->receive_room);
+ if (count)
+ disc->ops->receive_buf(tty, p, f, count);
+ }
head->read += count;
return count;
}
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 60b7b69..2ca8d6b 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -356,8 +356,8 @@ int paste_selection(struct tty_struct *tty)
continue;
}
count = sel_buffer_lth - pasted;
- count = min(count, tty->receive_room);
- ld->ops->receive_buf(tty, sel_buffer + pasted, NULL, count);
+ count = tty_ldisc_receive_buf(ld, sel_buffer + pasted, NULL,
+ count);
pasted += count;
}
remove_wait_queue(&vc->paste_wait, &wait);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index b05fa7f..7860e52 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -543,6 +543,19 @@ extern void tty_ldisc_init(struct tty_struct *tty);
extern void tty_ldisc_deinit(struct tty_struct *tty);
extern void tty_ldisc_begin(void);
+static inline int tty_ldisc_receive_buf(struct tty_ldisc *ld, unsigned char *p,
+ char *f, int count)
+{
+ if (ld->ops->receive_buf2)
+ count = ld->ops->receive_buf2(ld->tty, p, f, count);
+ else {
+ count = min_t(int, count, ld->tty->receive_room);
+ if (count)
+ ld->ops->receive_buf(ld->tty, p, f, count);
+ }
+ return count;
+}
+
/* n_tty.c */
extern struct tty_ldisc_ops tty_ldisc_N_TTY;
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 23bdd9d..f15c898 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -109,6 +109,17 @@
*
* Tells the discipline that the DCD pin has changed its status.
* Used exclusively by the N_PPS (Pulse-Per-Second) line discipline.
+ *
+ * int (*receive_buf2)(struct tty_struct *, const unsigned char *cp,
+ * char *fp, int count);
+ *
+ * This function is called by the low-level tty driver to send
+ * characters received by the hardware to the line discpline for
+ * processing. <cp> is a pointer to the buffer of input
+ * character received by the device. <fp> is a pointer to a
+ * pointer of flag bytes which indicate whether a character was
+ * received with a parity error, etc.
+ * If assigned, prefer this function for automatic flow control.
*/
#include <linux/fs.h>
@@ -195,6 +206,8 @@ struct tty_ldisc_ops {
void (*write_wakeup)(struct tty_struct *);
void (*dcd_change)(struct tty_struct *, unsigned int);
void (*fasync)(struct tty_struct *tty, int on);
+ int (*receive_buf2)(struct tty_struct *, const unsigned char *cp,
+ char *fp, int count);
struct module *owner;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 04/24] n_tty: Factor canonical mode copy from n_tty_read()
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (2 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 03/24] tty: Make ldisc input flow control concurrency-friendly Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 05/24] n_tty: Line copy to user buffer in canonical mode Peter Hurley
` (22 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Simplify n_tty_read(); extract complex copy algorithm
into separate function, canon_copy_to_user().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 95 ++++++++++++++++++++++++++++++++---------------------
1 file changed, 57 insertions(+), 38 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 009518b..574bc03 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1745,6 +1745,62 @@ static int copy_from_read_buf(struct tty_struct *tty,
return retval;
}
+/**
+ * canon_copy_to_user - copy read data in canonical mode
+ * @tty: terminal device
+ * @b: user data
+ * @nr: size of data
+ *
+ * Helper function for n_tty_read. It is only called when ICANON is on;
+ * it copies characters one at a time from the read buffer to the user
+ * space buffer.
+ *
+ * Called under the atomic_read_lock mutex
+ */
+
+static int canon_copy_to_user(struct tty_struct *tty,
+ unsigned char __user **b,
+ size_t *nr)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ unsigned long flags;
+ int eol, c;
+
+ /* N.B. avoid overrun if nr == 0 */
+ raw_spin_lock_irqsave(&ldata->read_lock, flags);
+ while (*nr && ldata->read_cnt) {
+
+ eol = test_and_clear_bit(ldata->read_tail, ldata->read_flags);
+ c = ldata->read_buf[ldata->read_tail];
+ ldata->read_tail = (ldata->read_tail+1) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt--;
+ if (eol) {
+ /* this test should be redundant:
+ * we shouldn't be reading data if
+ * canon_data is 0
+ */
+ if (--ldata->canon_data < 0)
+ ldata->canon_data = 0;
+ }
+ raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+
+ if (!eol || (c != __DISABLED_CHAR)) {
+ if (tty_put_user(tty, c, *b))
+ return -EFAULT;
+ *b += 1;
+ *nr -= 1;
+ }
+ if (eol) {
+ tty_audit_push(tty);
+ return 0;
+ }
+ raw_spin_lock_irqsave(&ldata->read_lock, flags);
+ }
+ raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+
+ return 0;
+}
+
extern ssize_t redirected_tty_write(struct file *, const char __user *,
size_t, loff_t *);
@@ -1914,44 +1970,7 @@ do_it_again:
}
if (ldata->icanon && !L_EXTPROC(tty)) {
- /* N.B. avoid overrun if nr == 0 */
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- while (nr && ldata->read_cnt) {
- int eol;
-
- eol = test_and_clear_bit(ldata->read_tail,
- ldata->read_flags);
- c = ldata->read_buf[ldata->read_tail];
- ldata->read_tail = ((ldata->read_tail+1) &
- (N_TTY_BUF_SIZE-1));
- ldata->read_cnt--;
- if (eol) {
- /* this test should be redundant:
- * we shouldn't be reading data if
- * canon_data is 0
- */
- if (--ldata->canon_data < 0)
- ldata->canon_data = 0;
- }
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
-
- if (!eol || (c != __DISABLED_CHAR)) {
- if (tty_put_user(tty, c, b++)) {
- retval = -EFAULT;
- b--;
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- break;
- }
- nr--;
- }
- if (eol) {
- tty_audit_push(tty);
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- break;
- }
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- }
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ retval = canon_copy_to_user(tty, &b, &nr);
if (retval)
break;
} else {
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 05/24] n_tty: Line copy to user buffer in canonical mode
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (3 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 04/24] n_tty: Factor canonical mode copy from n_tty_read() Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 06/24] n_tty: Split n_tty_chars_in_buffer() for reader-only interface Peter Hurley
` (21 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Instead of pushing one char per loop, pre-compute the data length
to copy and copy all at once.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 110 ++++++++++++++++++++++++++++++++++++----------------
1 file changed, 77 insertions(+), 33 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 574bc03..c0a187a 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -74,6 +74,13 @@
#define ECHO_OP_SET_CANON_COL 0x81
#define ECHO_OP_ERASE_TAB 0x82
+#undef N_TTY_TRACE
+#ifdef N_TTY_TRACE
+# define n_tty_trace(f, args...) trace_printk(f, ##args)
+#else
+# define n_tty_trace(f, args...)
+#endif
+
struct n_tty_data {
unsigned int column;
unsigned long overrun_time;
@@ -1746,58 +1753,95 @@ static int copy_from_read_buf(struct tty_struct *tty,
}
/**
- * canon_copy_to_user - copy read data in canonical mode
+ * canon_copy_from_read_buf - copy read data in canonical mode
* @tty: terminal device
* @b: user data
* @nr: size of data
*
* Helper function for n_tty_read. It is only called when ICANON is on;
- * it copies characters one at a time from the read buffer to the user
- * space buffer.
+ * it copies one line of input up to and including the line-delimiting
+ * character into the user-space buffer.
*
* Called under the atomic_read_lock mutex
*/
-static int canon_copy_to_user(struct tty_struct *tty,
- unsigned char __user **b,
- size_t *nr)
+static int canon_copy_from_read_buf(struct tty_struct *tty,
+ unsigned char __user **b,
+ size_t *nr)
{
struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
- int eol, c;
+ size_t n, size, more, c;
+ unsigned long eol;
+ int ret, tail, found = 0;
/* N.B. avoid overrun if nr == 0 */
+
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- while (*nr && ldata->read_cnt) {
-
- eol = test_and_clear_bit(ldata->read_tail, ldata->read_flags);
- c = ldata->read_buf[ldata->read_tail];
- ldata->read_tail = (ldata->read_tail+1) & (N_TTY_BUF_SIZE-1);
- ldata->read_cnt--;
- if (eol) {
- /* this test should be redundant:
- * we shouldn't be reading data if
- * canon_data is 0
- */
- if (--ldata->canon_data < 0)
- ldata->canon_data = 0;
- }
+
+ n = min_t(size_t, *nr, ldata->read_cnt);
+ if (!n) {
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ return 0;
+ }
- if (!eol || (c != __DISABLED_CHAR)) {
- if (tty_put_user(tty, c, *b))
- return -EFAULT;
- *b += 1;
- *nr -= 1;
- }
- if (eol) {
- tty_audit_push(tty);
- return 0;
- }
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
+ tail = ldata->read_tail;
+ size = min_t(size_t, tail + n, N_TTY_BUF_SIZE);
+
+ n_tty_trace("%s: nr:%zu tail:%d n:%zu size:%zu\n",
+ __func__, *nr, tail, n, size);
+
+ eol = find_next_bit(ldata->read_flags, size, tail);
+ more = n - (size - tail);
+ if (eol == N_TTY_BUF_SIZE && more) {
+ /* scan wrapped without finding set bit */
+ eol = find_next_bit(ldata->read_flags, more, 0);
+ if (eol != more)
+ found = 1;
+ } else if (eol != size)
+ found = 1;
+
+ size = N_TTY_BUF_SIZE - tail;
+ n = (found + eol + size) & (N_TTY_BUF_SIZE - 1);
+ c = n;
+
+ if (found && ldata->read_buf[eol] == __DISABLED_CHAR)
+ n--;
+
+ n_tty_trace("%s: eol:%lu found:%d n:%zu c:%zu size:%zu more:%zu\n",
+ __func__, eol, found, n, c, size, more);
+
+ raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+
+ if (n > size) {
+ ret = copy_to_user(*b, &ldata->read_buf[tail], size);
+ if (ret)
+ return -EFAULT;
+ ret = copy_to_user(*b + size, ldata->read_buf, n - size);
+ } else
+ ret = copy_to_user(*b, &ldata->read_buf[tail], n);
+
+ if (ret)
+ return -EFAULT;
+ *b += n;
+ *nr -= n;
+
+ raw_spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_tail = (ldata->read_tail + c) & (N_TTY_BUF_SIZE - 1);
+ ldata->read_cnt -= c;
+ if (found) {
+ __clear_bit(eol, ldata->read_flags);
+ /* this test should be redundant:
+ * we shouldn't be reading data if
+ * canon_data is 0
+ */
+ if (--ldata->canon_data < 0)
+ ldata->canon_data = 0;
}
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ if (found)
+ tty_audit_push(tty);
return 0;
}
@@ -1970,7 +2014,7 @@ do_it_again:
}
if (ldata->icanon && !L_EXTPROC(tty)) {
- retval = canon_copy_to_user(tty, &b, &nr);
+ retval = canon_copy_from_read_buf(tty, &b, &nr);
if (retval)
break;
} else {
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 06/24] n_tty: Split n_tty_chars_in_buffer() for reader-only interface
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (4 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 05/24] n_tty: Line copy to user buffer in canonical mode Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 07/24] tty: Deprecate ldisc .chars_in_buffer() method Peter Hurley
` (20 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
N_TTY .chars_in_buffer() method requires serialized access if
the current thread is not the single-consumer, n_tty_read().
Separate the internal interface; prepare for lockless read-side.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index c0a187a..c37f250 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -277,7 +277,7 @@ static void n_tty_flush_buffer(struct tty_struct *tty)
* Locking: read_lock
*/
-static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
+static ssize_t chars_in_buffer(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
@@ -295,6 +295,11 @@ static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
return n;
}
+static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
+{
+ return chars_in_buffer(tty);
+}
+
/**
* is_utf8_continuation - utf8 multibyte check
* @c: byte to check
@@ -2030,7 +2035,7 @@ do_it_again:
}
/* If there is enough space in the read buffer now, let the
- * low-level driver know. We use n_tty_chars_in_buffer() to
+ * low-level driver know. We use chars_in_buffer() to
* check the buffer, as it now knows about canonical mode.
* Otherwise, if the driver is throttled and the line is
* longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode,
@@ -2038,7 +2043,7 @@ do_it_again:
*/
while (1) {
tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
- if (n_tty_chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
+ if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
break;
if (!tty->count)
break;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 07/24] tty: Deprecate ldisc .chars_in_buffer() method
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (5 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 06/24] n_tty: Split n_tty_chars_in_buffer() for reader-only interface Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 08/24] n_tty: Get read_cnt through accessor Peter Hurley
` (19 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index c37f250..0bc0869 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -297,6 +297,7 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
{
+ WARN_ONCE(1, "%s is deprecated and scheduled for removal.", __func__);
return chars_in_buffer(tty);
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 08/24] n_tty: Get read_cnt through accessor
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (6 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 07/24] tty: Deprecate ldisc .chars_in_buffer() method Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 09/24] n_tty: Don't wrap input buffer indices at buffer size Peter Hurley
` (18 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Prepare for replacing read_cnt field with computed value.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 41 +++++++++++++++++++++++------------------
1 file changed, 23 insertions(+), 18 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0bc0869..8d6fe42 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -115,6 +115,11 @@ struct n_tty_data {
raw_spinlock_t read_lock;
};
+static inline size_t read_cnt(struct n_tty_data *ldata)
+{
+ return ldata->read_cnt;
+}
+
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
@@ -133,9 +138,9 @@ static int receive_room(struct tty_struct *tty)
/* Multiply read_cnt by 3, since each byte might take up to
* three times as many spaces when PARMRK is set (depending on
* its flags, e.g. parity error). */
- left = N_TTY_BUF_SIZE - ldata->read_cnt * 3 - 1;
+ left = N_TTY_BUF_SIZE - read_cnt(ldata) * 3 - 1;
} else
- left = N_TTY_BUF_SIZE - ldata->read_cnt - 1;
+ left = N_TTY_BUF_SIZE - read_cnt(ldata) - 1;
/*
* If we are doing input canonicalization, and there are no
@@ -180,7 +185,7 @@ static void n_tty_set_room(struct tty_struct *tty)
static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
{
- if (ldata->read_cnt < N_TTY_BUF_SIZE) {
+ if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
ldata->read_buf[ldata->read_head] = c;
ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
ldata->read_cnt++;
@@ -285,7 +290,7 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
raw_spin_lock_irqsave(&ldata->read_lock, flags);
if (!ldata->icanon) {
- n = ldata->read_cnt;
+ n = read_cnt(ldata);
} else if (ldata->canon_data) {
n = (ldata->canon_head > ldata->read_tail) ?
ldata->canon_head - ldata->read_tail :
@@ -1205,7 +1210,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
ldata->lnext = 0;
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
@@ -1305,7 +1310,7 @@ send_signal:
return;
}
if (c == '\n') {
- if (ldata->read_cnt >= N_TTY_BUF_SIZE) {
+ if (read_cnt(ldata) >= N_TTY_BUF_SIZE) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
@@ -1317,7 +1322,7 @@ send_signal:
goto handle_newline;
}
if (c == EOF_CHAR(tty)) {
- if (ldata->read_cnt >= N_TTY_BUF_SIZE)
+ if (read_cnt(ldata) >= N_TTY_BUF_SIZE)
return;
if (ldata->canon_head != ldata->read_head)
set_bit(TTY_PUSH, &tty->flags);
@@ -1328,7 +1333,7 @@ send_signal:
(c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
? 1 : 0;
- if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk)) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
@@ -1365,7 +1370,7 @@ handle_newline:
}
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
@@ -1431,7 +1436,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
if (ldata->real_raw) {
raw_spin_lock_irqsave(&ldata->read_lock, cpuflags);
- i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
memcpy(ldata->read_buf + ldata->read_head, cp, i);
@@ -1440,7 +1445,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
cp += i;
count -= i;
- i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
memcpy(ldata->read_buf + ldata->read_head, cp, i);
@@ -1475,7 +1480,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
tty->ops->flush_chars(tty);
}
- if ((!ldata->icanon && (ldata->read_cnt >= ldata->minimum_to_wake)) ||
+ if ((!ldata->icanon && (read_cnt(ldata) >= ldata->minimum_to_wake)) ||
L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
@@ -1553,7 +1558,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
ldata->erasing = 0;
}
- if (canon_change && !L_ICANON(tty) && ldata->read_cnt)
+ if (canon_change && !L_ICANON(tty) && read_cnt(ldata))
wake_up_interruptible(&tty->read_wait);
ldata->icanon = (L_ICANON(tty) != 0);
@@ -1699,7 +1704,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
if (ldata->icanon && !L_EXTPROC(tty)) {
if (ldata->canon_data)
return 1;
- } else if (ldata->read_cnt >= (amt ? amt : 1))
+ } else if (read_cnt(ldata) >= (amt ? amt : 1))
return 1;
return 0;
@@ -1735,7 +1740,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
retval = 0;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail);
+ n = min(read_cnt(ldata), N_TTY_BUF_SIZE - ldata->read_tail);
n = min(*nr, n);
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n) {
@@ -1749,7 +1754,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
ldata->read_cnt -= n;
/* Turn single EOF into zero-length read */
- if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt)
+ if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
n = 0;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
*b += n;
@@ -1785,7 +1790,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- n = min_t(size_t, *nr, ldata->read_cnt);
+ n = min(*nr, read_cnt(ldata));
if (!n) {
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
return 0;
@@ -2251,7 +2256,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
/* FIXME: Locking */
- retval = ldata->read_cnt;
+ retval = read_cnt(ldata);
if (L_ICANON(tty))
retval = inq_canon(ldata);
return put_user(retval, (unsigned int __user *) arg);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 09/24] n_tty: Don't wrap input buffer indices at buffer size
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (7 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 08/24] n_tty: Get read_cnt through accessor Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 10/24] n_tty: Remove read_cnt Peter Hurley
` (17 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Wrap read_buf indices (read_head, read_tail, canon_head) at
max representable value, instead of at the N_TTY_BUF_SIZE. This step
is necessary to allow lockless reads of these shared variables
(by updating the variables atomically).
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 111 ++++++++++++++++++++++++++++------------------------
1 file changed, 60 insertions(+), 51 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 8d6fe42..1406b63 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -96,8 +96,8 @@ struct n_tty_data {
DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
char *read_buf;
- int read_head;
- int read_tail;
+ size_t read_head;
+ size_t read_tail;
int read_cnt;
int minimum_to_wake;
@@ -106,7 +106,7 @@ struct n_tty_data {
unsigned int echo_cnt;
int canon_data;
- unsigned long canon_head;
+ size_t canon_head;
unsigned int canon_column;
struct mutex atomic_read_lock;
@@ -120,6 +120,16 @@ static inline size_t read_cnt(struct n_tty_data *ldata)
return ldata->read_cnt;
}
+static inline unsigned char read_buf(struct n_tty_data *ldata, size_t i)
+{
+ return ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)];
+}
+
+static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i)
+{
+ return &ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)];
+}
+
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
@@ -186,8 +196,8 @@ static void n_tty_set_room(struct tty_struct *tty)
static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
{
if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
- ldata->read_buf[ldata->read_head] = c;
- ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
+ *read_buf_addr(ldata, ldata->read_head) = c;
+ ldata->read_head++;
ldata->read_cnt++;
}
}
@@ -289,13 +299,10 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
ssize_t n = 0;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- if (!ldata->icanon) {
+ if (!ldata->icanon)
n = read_cnt(ldata);
- } else if (ldata->canon_data) {
- n = (ldata->canon_head > ldata->read_tail) ?
- ldata->canon_head - ldata->read_tail :
- ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail);
- }
+ else
+ n = ldata->canon_head - ldata->read_tail;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
return n;
}
@@ -919,7 +926,9 @@ static void eraser(unsigned char c, struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
enum { ERASE, WERASE, KILL } kill_type;
- int head, seen_alnums, cnt;
+ size_t head;
+ size_t cnt;
+ int seen_alnums;
unsigned long flags;
/* FIXME: locking needed ? */
@@ -963,8 +972,8 @@ static void eraser(unsigned char c, struct tty_struct *tty)
/* erase a single possibly multibyte character */
do {
- head = (head - 1) & (N_TTY_BUF_SIZE-1);
- c = ldata->read_buf[head];
+ head--;
+ c = read_buf(ldata, head);
} while (is_continuation(c, tty) && head != ldata->canon_head);
/* do not partially erase */
@@ -978,7 +987,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
else if (seen_alnums)
break;
}
- cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1);
+ cnt = ldata->read_head - head;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = head;
ldata->read_cnt -= cnt;
@@ -992,9 +1001,8 @@ static void eraser(unsigned char c, struct tty_struct *tty)
/* if cnt > 1, output a multi-byte character */
echo_char(c, tty);
while (--cnt > 0) {
- head = (head+1) & (N_TTY_BUF_SIZE-1);
- echo_char_raw(ldata->read_buf[head],
- ldata);
+ head++;
+ echo_char_raw(read_buf(ldata, head), ldata);
echo_move_back_col(ldata);
}
} else if (kill_type == ERASE && !L_ECHOE(tty)) {
@@ -1002,7 +1010,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
} else if (c == '\t') {
unsigned int num_chars = 0;
int after_tab = 0;
- unsigned long tail = ldata->read_head;
+ size_t tail = ldata->read_head;
/*
* Count the columns used for characters
@@ -1012,8 +1020,8 @@ static void eraser(unsigned char c, struct tty_struct *tty)
* number of columns.
*/
while (tail != ldata->canon_head) {
- tail = (tail-1) & (N_TTY_BUF_SIZE-1);
- c = ldata->read_buf[tail];
+ tail--;
+ c = read_buf(ldata, tail);
if (c == '\t') {
after_tab = 1;
break;
@@ -1297,14 +1305,14 @@ send_signal:
}
if (c == REPRINT_CHAR(tty) && L_ECHO(tty) &&
L_IEXTEN(tty)) {
- unsigned long tail = ldata->canon_head;
+ size_t tail = ldata->canon_head;
finish_erasing(ldata);
echo_char(c, tty);
echo_char_raw('\n', ldata);
while (tail != ldata->read_head) {
- echo_char(ldata->read_buf[tail], tty);
- tail = (tail+1) & (N_TTY_BUF_SIZE-1);
+ echo_char(read_buf(ldata, tail), tty);
+ tail++;
}
process_echoes(tty);
return;
@@ -1357,7 +1365,7 @@ send_signal:
handle_newline:
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- set_bit(ldata->read_head, ldata->read_flags);
+ set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags);
put_tty_queue_nolock(c, ldata);
ldata->canon_head = ldata->read_head;
ldata->canon_data++;
@@ -1437,19 +1445,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
if (ldata->real_raw) {
raw_spin_lock_irqsave(&ldata->read_lock, cpuflags);
i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
- N_TTY_BUF_SIZE - ldata->read_head);
+ N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1)));
i = min(count, i);
- memcpy(ldata->read_buf + ldata->read_head, cp, i);
- ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
+ ldata->read_head += i;
ldata->read_cnt += i;
cp += i;
count -= i;
i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
- N_TTY_BUF_SIZE - ldata->read_head);
+ N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1)));
i = min(count, i);
- memcpy(ldata->read_buf + ldata->read_head, cp, i);
- ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
+ ldata->read_head += i;
ldata->read_cnt += i;
raw_spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
} else {
@@ -1737,21 +1745,21 @@ static int copy_from_read_buf(struct tty_struct *tty,
size_t n;
unsigned long flags;
bool is_eof;
+ size_t tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
retval = 0;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- n = min(read_cnt(ldata), N_TTY_BUF_SIZE - ldata->read_tail);
+ n = min(read_cnt(ldata), N_TTY_BUF_SIZE - tail);
n = min(*nr, n);
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n) {
- retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n);
+ retval = copy_to_user(*b, read_buf_addr(ldata, tail), n);
n -= retval;
- is_eof = n == 1 &&
- ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty);
- tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n,
+ is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty);
+ tty_audit_add_data(tty, read_buf_addr(ldata, tail), n,
ldata->icanon);
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
+ ldata->read_tail += n;
ldata->read_cnt -= n;
/* Turn single EOF into zero-length read */
if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
@@ -1783,8 +1791,9 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
size_t n, size, more, c;
- unsigned long eol;
- int ret, tail, found = 0;
+ size_t eol;
+ size_t tail;
+ int ret, found = 0;
/* N.B. avoid overrun if nr == 0 */
@@ -1796,10 +1805,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
return 0;
}
- tail = ldata->read_tail;
+ tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
size = min_t(size_t, tail + n, N_TTY_BUF_SIZE);
- n_tty_trace("%s: nr:%zu tail:%d n:%zu size:%zu\n",
+ n_tty_trace("%s: nr:%zu tail:%zu n:%zu size:%zu\n",
__func__, *nr, tail, n, size);
eol = find_next_bit(ldata->read_flags, size, tail);
@@ -1816,21 +1825,21 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
n = (found + eol + size) & (N_TTY_BUF_SIZE - 1);
c = n;
- if (found && ldata->read_buf[eol] == __DISABLED_CHAR)
+ if (found && read_buf(ldata, eol) == __DISABLED_CHAR)
n--;
- n_tty_trace("%s: eol:%lu found:%d n:%zu c:%zu size:%zu more:%zu\n",
+ n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu size:%zu more:%zu\n",
__func__, eol, found, n, c, size, more);
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n > size) {
- ret = copy_to_user(*b, &ldata->read_buf[tail], size);
+ ret = copy_to_user(*b, read_buf_addr(ldata, tail), size);
if (ret)
return -EFAULT;
ret = copy_to_user(*b + size, ldata->read_buf, n - size);
} else
- ret = copy_to_user(*b, &ldata->read_buf[tail], n);
+ ret = copy_to_user(*b, read_buf_addr(ldata, tail), n);
if (ret)
return -EFAULT;
@@ -1838,7 +1847,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
*nr -= n;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_tail = (ldata->read_tail + c) & (N_TTY_BUF_SIZE - 1);
+ ldata->read_tail += c;
ldata->read_cnt -= c;
if (found) {
__clear_bit(eol, ldata->read_flags);
@@ -2228,19 +2237,19 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
static unsigned long inq_canon(struct n_tty_data *ldata)
{
- int nr, head, tail;
+ size_t nr, head, tail;
if (!ldata->canon_data)
return 0;
head = ldata->canon_head;
tail = ldata->read_tail;
- nr = (head - tail) & (N_TTY_BUF_SIZE-1);
+ nr = head - tail;
/* Skip EOF-chars.. */
while (head != tail) {
- if (test_bit(tail, ldata->read_flags) &&
- ldata->read_buf[tail] == __DISABLED_CHAR)
+ if (test_bit(tail & (N_TTY_BUF_SIZE - 1), ldata->read_flags) &&
+ read_buf(ldata, tail) == __DISABLED_CHAR)
nr--;
- tail = (tail+1) & (N_TTY_BUF_SIZE-1);
+ tail++;
}
return nr;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 10/24] n_tty: Remove read_cnt
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (8 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 09/24] n_tty: Don't wrap input buffer indices at buffer size Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 11/24] tty: Convert termios_mutex to termios_rwsem Peter Hurley
` (16 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Storing the read_cnt creates an unnecessary shared variable
between the single-producer (n_tty_receive_buf()) and the
single-consumer (n_tty_read()).
Compute read_cnt from head & tail instead of storing.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 1406b63..fdabd65 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -98,7 +98,6 @@ struct n_tty_data {
char *read_buf;
size_t read_head;
size_t read_tail;
- int read_cnt;
int minimum_to_wake;
unsigned char *echo_buf;
@@ -117,7 +116,7 @@ struct n_tty_data {
static inline size_t read_cnt(struct n_tty_data *ldata)
{
- return ldata->read_cnt;
+ return ldata->read_head - ldata->read_tail;
}
static inline unsigned char read_buf(struct n_tty_data *ldata, size_t i)
@@ -198,7 +197,6 @@ static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
*read_buf_addr(ldata, ldata->read_head) = c;
ldata->read_head++;
- ldata->read_cnt++;
}
}
@@ -239,7 +237,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
unsigned long flags;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_head = ldata->read_tail = ldata->read_cnt = 0;
+ ldata->read_head = ldata->read_tail = 0;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
mutex_lock(&ldata->echo_lock);
@@ -943,16 +941,12 @@ static void eraser(unsigned char c, struct tty_struct *tty)
else {
if (!L_ECHO(tty)) {
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
- (N_TTY_BUF_SIZE - 1));
ldata->read_head = ldata->canon_head;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
return;
}
if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
- (N_TTY_BUF_SIZE - 1));
ldata->read_head = ldata->canon_head;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
finish_erasing(ldata);
@@ -990,7 +984,6 @@ static void eraser(unsigned char c, struct tty_struct *tty)
cnt = ldata->read_head - head;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = head;
- ldata->read_cnt -= cnt;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
@@ -1449,7 +1442,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
i = min(count, i);
memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
ldata->read_head += i;
- ldata->read_cnt += i;
cp += i;
count -= i;
@@ -1458,7 +1450,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
i = min(count, i);
memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
ldata->read_head += i;
- ldata->read_cnt += i;
raw_spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
} else {
for (i = count, p = cp, f = fp; i; i--, p++) {
@@ -1760,7 +1751,6 @@ static int copy_from_read_buf(struct tty_struct *tty,
ldata->icanon);
raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_tail += n;
- ldata->read_cnt -= n;
/* Turn single EOF into zero-length read */
if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
n = 0;
@@ -1848,7 +1838,6 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_tail += c;
- ldata->read_cnt -= c;
if (found) {
__clear_bit(eol, ldata->read_flags);
/* this test should be redundant:
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 11/24] tty: Convert termios_mutex to termios_rwsem
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (9 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 10/24] n_tty: Remove read_cnt Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 12/24] n_tty: Access termios values safely Peter Hurley
` (15 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
termios is commonly accessed unsafely (especially by N_TTY)
because the existing mutex forces exclusive access.
Convert existing usage.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/net/irda/irtty-sir.c | 8 ++--
drivers/tty/n_tty.c | 2 +-
drivers/tty/pty.c | 4 +-
drivers/tty/tty_io.c | 14 +++----
drivers/tty/tty_ioctl.c | 90 ++++++++++++++++++++++----------------------
drivers/tty/tty_ldisc.c | 10 ++---
drivers/tty/vt/vt.c | 4 +-
include/linux/tty.h | 7 ++--
8 files changed, 70 insertions(+), 69 deletions(-)
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index a412671..177441a 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -123,14 +123,14 @@ static int irtty_change_speed(struct sir_dev *dev, unsigned speed)
tty = priv->tty;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
old_termios = tty->termios;
cflag = tty->termios.c_cflag;
tty_encode_baud_rate(tty, speed, speed);
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old_termios);
priv->io.speed = speed;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
@@ -280,7 +280,7 @@ static inline void irtty_stop_receiver(struct tty_struct *tty, int stop)
struct ktermios old_termios;
int cflag;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
old_termios = tty->termios;
cflag = tty->termios.c_cflag;
@@ -292,7 +292,7 @@ static inline void irtty_stop_receiver(struct tty_struct *tty, int stop)
tty->termios.c_cflag = cflag;
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old_termios);
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
}
/*****************************************************************/
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index fdabd65..4389b6f 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1540,7 +1540,7 @@ int is_ignored(int sig)
* guaranteed that this function will not be re-entered or in progress
* when the ldisc is closed.
*
- * Locking: Caller holds tty->termios_mutex
+ * Locking: Caller holds tty->termios_rwsem
*/
static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index c24b4db..50bec0d 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -290,7 +290,7 @@ static int pty_resize(struct tty_struct *tty, struct winsize *ws)
struct tty_struct *pty = tty->link;
/* For a PTY we need to lock the tty side */
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
goto done;
@@ -317,7 +317,7 @@ static int pty_resize(struct tty_struct *tty, struct winsize *ws)
tty->winsize = *ws;
pty->winsize = *ws; /* Never used so will go away soon */
done:
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 9dcb2ce..30201e6 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -550,7 +550,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup);
* redirect lock for undoing redirection
* file list lock for manipulating list of ttys
* tty_ldisc_lock from called functions
- * termios_mutex resetting termios data
+ * termios_rwsem resetting termios data
* tasklist_lock to walk task list for hangup event
* ->siglock to protect ->signal/->sighand
*/
@@ -2166,7 +2166,7 @@ static int tiocsti(struct tty_struct *tty, char __user *p)
*
* Copies the kernel idea of the window size into the user buffer.
*
- * Locking: tty->termios_mutex is taken to ensure the winsize data
+ * Locking: tty->termios_rwsem is taken to ensure the winsize data
* is consistent.
*/
@@ -2174,9 +2174,9 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
{
int err;
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
err = copy_to_user(arg, &tty->winsize, sizeof(*arg));
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
return err ? -EFAULT: 0;
}
@@ -2197,7 +2197,7 @@ int tty_do_resize(struct tty_struct *tty, struct winsize *ws)
unsigned long flags;
/* Lock the tty */
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
goto done;
/* Get the PID values and reference them so we can
@@ -2212,7 +2212,7 @@ int tty_do_resize(struct tty_struct *tty, struct winsize *ws)
tty->winsize = *ws;
done:
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
EXPORT_SYMBOL(tty_do_resize);
@@ -2951,7 +2951,7 @@ void initialize_tty_struct(struct tty_struct *tty,
tty->session = NULL;
tty->pgrp = NULL;
mutex_init(&tty->legacy_mutex);
- mutex_init(&tty->termios_mutex);
+ init_rwsem(&tty->termios_rwsem);
init_ldsem(&tty->ldisc_sem);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 2febed5..490e499 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -94,20 +94,20 @@ EXPORT_SYMBOL(tty_driver_flush_buffer);
* @tty: terminal
*
* Indicate that a tty should stop transmitting data down the stack.
- * Takes the termios mutex to protect against parallel throttle/unthrottle
+ * Takes the termios rwsem to protect against parallel throttle/unthrottle
* and also to ensure the driver can consistently reference its own
* termios data at this point when implementing software flow control.
*/
void tty_throttle(struct tty_struct *tty)
{
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
/* check TTY_THROTTLED first so it indicates our state */
if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) &&
tty->ops->throttle)
tty->ops->throttle(tty);
tty->flow_change = 0;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
}
EXPORT_SYMBOL(tty_throttle);
@@ -116,7 +116,7 @@ EXPORT_SYMBOL(tty_throttle);
* @tty: terminal
*
* Indicate that a tty may continue transmitting data down the stack.
- * Takes the termios mutex to protect against parallel throttle/unthrottle
+ * Takes the termios rwsem to protect against parallel throttle/unthrottle
* and also to ensure the driver can consistently reference its own
* termios data at this point when implementing software flow control.
*
@@ -126,12 +126,12 @@ EXPORT_SYMBOL(tty_throttle);
void tty_unthrottle(struct tty_struct *tty)
{
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
tty->ops->unthrottle)
tty->ops->unthrottle(tty);
tty->flow_change = 0;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
}
EXPORT_SYMBOL(tty_unthrottle);
@@ -151,7 +151,7 @@ int tty_throttle_safe(struct tty_struct *tty)
{
int ret = 0;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (!test_bit(TTY_THROTTLED, &tty->flags)) {
if (tty->flow_change != TTY_THROTTLE_SAFE)
ret = 1;
@@ -161,7 +161,7 @@ int tty_throttle_safe(struct tty_struct *tty)
tty->ops->throttle(tty);
}
}
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return ret;
}
@@ -182,7 +182,7 @@ int tty_unthrottle_safe(struct tty_struct *tty)
{
int ret = 0;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (test_bit(TTY_THROTTLED, &tty->flags)) {
if (tty->flow_change != TTY_UNTHROTTLE_SAFE)
ret = 1;
@@ -192,7 +192,7 @@ int tty_unthrottle_safe(struct tty_struct *tty)
tty->ops->unthrottle(tty);
}
}
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return ret;
}
@@ -468,7 +468,7 @@ EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
* @obad: output baud rate
*
* Update the current termios data for the tty with the new speed
- * settings. The caller must hold the termios_mutex for the tty in
+ * settings. The caller must hold the termios_rwsem for the tty in
* question.
*/
@@ -556,7 +556,7 @@ EXPORT_SYMBOL(tty_termios_hw_change);
* is a bit of layering violation here with n_tty in terms of the
* internal knowledge of this function.
*
- * Locking: termios_mutex
+ * Locking: termios_rwsem
*/
int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
@@ -572,7 +572,7 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
/* FIXME: we need to decide on some locking/ordering semantics
for the set_termios notification eventually */
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
old_termios = tty->termios;
tty->termios = *new_termios;
unset_locked_termios(&tty->termios, &old_termios, &tty->termios_locked);
@@ -614,7 +614,7 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
(ld->ops->set_termios)(tty, &old_termios);
tty_ldisc_deref(ld);
}
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
EXPORT_SYMBOL_GPL(tty_set_termios);
@@ -629,7 +629,7 @@ EXPORT_SYMBOL_GPL(tty_set_termios);
* functions before using tty_set_termios to do the actual changes.
*
* Locking:
- * Called functions take ldisc and termios_mutex locks
+ * Called functions take ldisc and termios_rwsem locks
*/
static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
@@ -641,9 +641,9 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
if (retval)
return retval;
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
tmp_termios = tty->termios;
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
if (opt & TERMIOS_TERMIO) {
if (user_termio_to_kernel_termios(&tmp_termios,
@@ -695,16 +695,16 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
static void copy_termios(struct tty_struct *tty, struct ktermios *kterm)
{
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
*kterm = tty->termios;
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
}
static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm)
{
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
*kterm = tty->termios_locked;
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
}
static int get_termio(struct tty_struct *tty, struct termio __user *termio)
@@ -751,10 +751,10 @@ static int set_termiox(struct tty_struct *tty, void __user *arg, int opt)
return -ERESTARTSYS;
}
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (tty->ops->set_termiox)
tty->ops->set_termiox(tty, &tnew);
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
@@ -789,13 +789,13 @@ static int get_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
{
struct sgttyb tmp;
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
tmp.sg_ispeed = tty->termios.c_ispeed;
tmp.sg_ospeed = tty->termios.c_ospeed;
tmp.sg_erase = tty->termios.c_cc[VERASE];
tmp.sg_kill = tty->termios.c_cc[VKILL];
tmp.sg_flags = get_sgflags(tty);
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
return copy_to_user(sgttyb, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -834,7 +834,7 @@ static void set_sgflags(struct ktermios *termios, int flags)
* Updates a terminal from the legacy BSD style terminal information
* structure.
*
- * Locking: termios_mutex
+ * Locking: termios_rwsem
*/
static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
@@ -850,7 +850,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
if (copy_from_user(&tmp, sgttyb, sizeof(tmp)))
return -EFAULT;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
termios = tty->termios;
termios.c_cc[VERASE] = tmp.sg_erase;
termios.c_cc[VKILL] = tmp.sg_kill;
@@ -860,7 +860,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
tty_termios_encode_baud_rate(&termios, termios.c_ispeed,
termios.c_ospeed);
#endif
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
tty_set_termios(tty, &termios);
return 0;
}
@@ -871,14 +871,14 @@ static int get_tchars(struct tty_struct *tty, struct tchars __user *tchars)
{
struct tchars tmp;
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
tmp.t_intrc = tty->termios.c_cc[VINTR];
tmp.t_quitc = tty->termios.c_cc[VQUIT];
tmp.t_startc = tty->termios.c_cc[VSTART];
tmp.t_stopc = tty->termios.c_cc[VSTOP];
tmp.t_eofc = tty->termios.c_cc[VEOF];
tmp.t_brkc = tty->termios.c_cc[VEOL2]; /* what is brkc anyway? */
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -888,14 +888,14 @@ static int set_tchars(struct tty_struct *tty, struct tchars __user *tchars)
if (copy_from_user(&tmp, tchars, sizeof(tmp)))
return -EFAULT;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
tty->termios.c_cc[VINTR] = tmp.t_intrc;
tty->termios.c_cc[VQUIT] = tmp.t_quitc;
tty->termios.c_cc[VSTART] = tmp.t_startc;
tty->termios.c_cc[VSTOP] = tmp.t_stopc;
tty->termios.c_cc[VEOF] = tmp.t_eofc;
tty->termios.c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
#endif
@@ -905,7 +905,7 @@ static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
{
struct ltchars tmp;
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
tmp.t_suspc = tty->termios.c_cc[VSUSP];
/* what is dsuspc anyway? */
tmp.t_dsuspc = tty->termios.c_cc[VSUSP];
@@ -914,7 +914,7 @@ static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
tmp.t_flushc = tty->termios.c_cc[VEOL2];
tmp.t_werasc = tty->termios.c_cc[VWERASE];
tmp.t_lnextc = tty->termios.c_cc[VLNEXT];
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -925,7 +925,7 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
if (copy_from_user(&tmp, ltchars, sizeof(tmp)))
return -EFAULT;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
tty->termios.c_cc[VSUSP] = tmp.t_suspc;
/* what is dsuspc anyway? */
tty->termios.c_cc[VEOL2] = tmp.t_dsuspc;
@@ -934,7 +934,7 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
tty->termios.c_cc[VEOL2] = tmp.t_flushc;
tty->termios.c_cc[VWERASE] = tmp.t_werasc;
tty->termios.c_cc[VLNEXT] = tmp.t_lnextc;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
#endif
@@ -974,7 +974,7 @@ static int send_prio_char(struct tty_struct *tty, char ch)
* @arg: enable/disable CLOCAL
*
* Perform a change to the CLOCAL state and call into the driver
- * layer to make it visible. All done with the termios mutex
+ * layer to make it visible. All done with the termios rwsem
*/
static int tty_change_softcar(struct tty_struct *tty, int arg)
@@ -983,7 +983,7 @@ static int tty_change_softcar(struct tty_struct *tty, int arg)
int bit = arg ? CLOCAL : 0;
struct ktermios old;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
old = tty->termios;
tty->termios.c_cflag &= ~CLOCAL;
tty->termios.c_cflag |= bit;
@@ -991,7 +991,7 @@ static int tty_change_softcar(struct tty_struct *tty, int arg)
tty->ops->set_termios(tty, &old);
if ((tty->termios.c_cflag & CLOCAL) != bit)
ret = -EINVAL;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return ret;
}
@@ -1094,9 +1094,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
if (user_termios_to_kernel_termios(&kterm,
(struct termios __user *) arg))
return -EFAULT;
- mutex_lock(&real_tty->termios_mutex);
+ down_write(&real_tty->termios_rwsem);
real_tty->termios_locked = kterm;
- mutex_unlock(&real_tty->termios_mutex);
+ up_write(&real_tty->termios_rwsem);
return 0;
#else
case TIOCGLCKTRMIOS:
@@ -1111,9 +1111,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
if (user_termios_to_kernel_termios_1(&kterm,
(struct termios __user *) arg))
return -EFAULT;
- mutex_lock(&real_tty->termios_mutex);
+ down_write(&real_tty->termios_rwsem);
real_tty->termios_locked = kterm;
- mutex_unlock(&real_tty->termios_mutex);
+ up_write(&real_tty->termios_rwsem);
return ret;
#endif
#ifdef TCGETX
@@ -1121,9 +1121,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
struct termiox ktermx;
if (real_tty->termiox == NULL)
return -EINVAL;
- mutex_lock(&real_tty->termios_mutex);
+ down_read(&real_tty->termios_rwsem);
memcpy(&ktermx, real_tty->termiox, sizeof(struct termiox));
- mutex_unlock(&real_tty->termios_mutex);
+ up_read(&real_tty->termios_rwsem);
if (copy_to_user(p, &ktermx, sizeof(struct termiox)))
ret = -EFAULT;
return ret;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 5a6c43d..d7d5e6a 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -414,14 +414,14 @@ EXPORT_SYMBOL_GPL(tty_ldisc_flush);
* they are not on hot paths so a little discipline won't do
* any harm.
*
- * Locking: takes termios_mutex
+ * Locking: takes termios_rwsem
*/
static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
{
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
tty->termios.c_line = num;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
}
/**
@@ -599,11 +599,11 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
static void tty_reset_termios(struct tty_struct *tty)
{
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
tty->termios = tty->driver->init_termios;
tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
}
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index fbd447b..0829c02 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -829,7 +829,7 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
* If the caller passes a tty structure then update the termios winsize
* information and perform any necessary signal handling.
*
- * Caller must hold the console semaphore. Takes the termios mutex and
+ * Caller must hold the console semaphore. Takes the termios rwsem and
* ctrl_lock of the tty IFF a tty is passed.
*/
@@ -973,7 +973,7 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows)
* the actual work.
*
* Takes the console sem and the called methods then take the tty
- * termios_mutex and the tty ctrl_lock in that order.
+ * termios_rwsem and the tty ctrl_lock in that order.
*/
static int vt_resize(struct tty_struct *tty, struct winsize *ws)
{
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 7860e52..1d1c7c6a 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -10,6 +10,7 @@
#include <linux/mutex.h>
#include <linux/tty_flags.h>
#include <uapi/linux/tty.h>
+#include <linux/rwsem.h>
@@ -243,9 +244,9 @@ struct tty_struct {
struct mutex atomic_write_lock;
struct mutex legacy_mutex;
- struct mutex termios_mutex;
+ struct rw_semaphore termios_rwsem;
spinlock_t ctrl_lock;
- /* Termios values are protected by the termios mutex */
+ /* Termios values are protected by the termios rwsem */
struct ktermios termios, termios_locked;
struct termiox *termiox; /* May be NULL for unsupported */
char name[64];
@@ -253,7 +254,7 @@ struct tty_struct {
struct pid *session;
unsigned long flags;
int count;
- struct winsize winsize; /* termios mutex */
+ struct winsize winsize; /* termios rwsem */
unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1;
unsigned char warned:1;
unsigned char ctrl_status; /* ctrl_lock */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 12/24] n_tty: Access termios values safely
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (10 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 11/24] tty: Convert termios_mutex to termios_rwsem Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 13/24] n_tty: Replace canon_data with index comparison Peter Hurley
` (14 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Use termios_rwsem to guarantee safe access to the termios values.
This is particularly important for N_TTY as changing certain termios
settings alters the mode of operation.
termios_rwsem must be dropped across throttle/unthrottle since
those functions claim the termios_rwsem exclusively (to guarantee
safe access to the termios and for mutual exclusion).
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 44 +++++++++++++++++++++++++++++++++++++++-----
1 file changed, 39 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 4389b6f..924a3f5 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1492,10 +1492,14 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
* canonical mode and don't have a newline yet!
*/
while (1) {
+ int throttled;
tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE)
break;
- if (!tty_throttle_safe(tty))
+ up_read(&tty->termios_rwsem);
+ throttled = tty_throttle_safe(tty);
+ down_read(&tty->termios_rwsem);
+ if (!throttled)
break;
}
__tty_set_flow_change(tty, 0);
@@ -1504,7 +1508,9 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ down_read(&tty->termios_rwsem);
__receive_buf(tty, cp, fp, count);
+ up_read(&tty->termios_rwsem);
}
static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
@@ -1513,6 +1519,8 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
struct n_tty_data *ldata = tty->disc_data;
int room;
+ down_read(&tty->termios_rwsem);
+
tty->receive_room = room = receive_room(tty);
if (!room)
ldata->no_room = 1;
@@ -1520,6 +1528,8 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
if (count)
__receive_buf(tty, cp, fp, count);
+ up_read(&tty->termios_rwsem);
+
return count;
}
@@ -1932,6 +1942,8 @@ do_it_again:
if (c < 0)
return c;
+ down_read(&tty->termios_rwsem);
+
minimum = time = 0;
timeout = MAX_SCHEDULE_TIMEOUT;
if (!ldata->icanon) {
@@ -1953,11 +1965,15 @@ do_it_again:
* Internal serialization of reads.
*/
if (file->f_flags & O_NONBLOCK) {
- if (!mutex_trylock(&ldata->atomic_read_lock))
+ if (!mutex_trylock(&ldata->atomic_read_lock)) {
+ up_read(&tty->termios_rwsem);
return -EAGAIN;
+ }
} else {
- if (mutex_lock_interruptible(&ldata->atomic_read_lock))
+ if (mutex_lock_interruptible(&ldata->atomic_read_lock)) {
+ up_read(&tty->termios_rwsem);
return -ERESTARTSYS;
+ }
}
packet = tty->packet;
@@ -2007,7 +2023,11 @@ do_it_again:
break;
}
n_tty_set_room(tty);
+ up_read(&tty->termios_rwsem);
+
timeout = schedule_timeout(timeout);
+
+ down_read(&tty->termios_rwsem);
continue;
}
__set_current_state(TASK_RUNNING);
@@ -2046,13 +2066,17 @@ do_it_again:
* we won't get any more characters.
*/
while (1) {
+ int unthrottled;
tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
break;
if (!tty->count)
break;
n_tty_set_room(tty);
- if (!tty_unthrottle_safe(tty))
+ up_read(&tty->termios_rwsem);
+ unthrottled = tty_unthrottle_safe(tty);
+ down_read(&tty->termios_rwsem);
+ if (!unthrottled)
break;
}
__tty_set_flow_change(tty, 0);
@@ -2074,10 +2098,13 @@ do_it_again:
retval = size;
if (nr)
clear_bit(TTY_PUSH, &tty->flags);
- } else if (test_and_clear_bit(TTY_PUSH, &tty->flags))
+ } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) {
+ up_read(&tty->termios_rwsem);
goto do_it_again;
+ }
n_tty_set_room(tty);
+ up_read(&tty->termios_rwsem);
return retval;
}
@@ -2118,6 +2145,8 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
return retval;
}
+ down_read(&tty->termios_rwsem);
+
/* Write out any echoed characters that are still pending */
process_echoes(tty);
@@ -2171,13 +2200,18 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
retval = -EAGAIN;
break;
}
+ up_read(&tty->termios_rwsem);
+
schedule();
+
+ down_read(&tty->termios_rwsem);
}
break_out:
__set_current_state(TASK_RUNNING);
remove_wait_queue(&tty->write_wait, &wait);
if (b - buf != nr && tty->fasync)
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ up_read(&tty->termios_rwsem);
return (b - buf) ? b - buf : retval;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 13/24] n_tty: Replace canon_data with index comparison
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (11 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 12/24] n_tty: Access termios values safely Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 14/24] n_tty: Make N_TTY ldisc receive path lockless Peter Hurley
` (13 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
canon_data represented the # of lines which had been copied
to the receive buffer but not yet copied to the user buffer.
The value was tested to determine if input was available in
canonical mode (and also to force input overrun if the
receive buffer was full but a newline had not been received).
However, the actual count was irrelevent; only whether it was
non-zero (meaning 'is there any input to transfer?'). This
shared count is unnecessary and unsafe with a lockless algorithm.
The same check is made by comparing canon_head with read_tail instead.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 924a3f5..8f42dde 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -104,7 +104,6 @@ struct n_tty_data {
unsigned int echo_pos;
unsigned int echo_cnt;
- int canon_data;
size_t canon_head;
unsigned int canon_column;
@@ -158,7 +157,7 @@ static int receive_room(struct tty_struct *tty)
* characters will be beeped.
*/
if (left <= 0)
- left = ldata->icanon && !ldata->canon_data;
+ left = ldata->icanon && ldata->canon_head == ldata->read_tail;
return left;
}
@@ -237,14 +236,14 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
unsigned long flags;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_head = ldata->read_tail = 0;
+ ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
mutex_lock(&ldata->echo_lock);
ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
mutex_unlock(&ldata->echo_lock);
- ldata->canon_head = ldata->canon_data = ldata->erasing = 0;
+ ldata->erasing = 0;
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
}
@@ -1361,7 +1360,6 @@ handle_newline:
set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags);
put_tty_queue_nolock(c, ldata);
ldata->canon_head = ldata->read_head;
- ldata->canon_data++;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
@@ -1563,7 +1561,6 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
if (canon_change) {
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
ldata->canon_head = ldata->read_tail;
- ldata->canon_data = 0;
ldata->erasing = 0;
}
@@ -1711,7 +1708,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
tty_flush_to_ldisc(tty);
if (ldata->icanon && !L_EXTPROC(tty)) {
- if (ldata->canon_data)
+ if (ldata->canon_head != ldata->read_tail)
return 1;
} else if (read_cnt(ldata) >= (amt ? amt : 1))
return 1;
@@ -1848,15 +1845,8 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_tail += c;
- if (found) {
+ if (found)
__clear_bit(eol, ldata->read_flags);
- /* this test should be redundant:
- * we shouldn't be reading data if
- * canon_data is 0
- */
- if (--ldata->canon_data < 0)
- ldata->canon_data = 0;
- }
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (found)
@@ -2262,7 +2252,7 @@ static unsigned long inq_canon(struct n_tty_data *ldata)
{
size_t nr, head, tail;
- if (!ldata->canon_data)
+ if (ldata->canon_head == ldata->read_tail)
return 0;
head = ldata->canon_head;
tail = ldata->read_tail;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 14/24] n_tty: Make N_TTY ldisc receive path lockless
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (12 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 13/24] n_tty: Replace canon_data with index comparison Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 15/24] n_tty: Reset lnext if canonical mode changes Peter Hurley
` (12 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
n_tty has a single-producer/single-consumer input model;
use lockless publish instead.
Use termios_rwsem to exclude both consumer and producer while
changing or resetting buffer indices, eg., when flushing. Also,
claim exclusive termios_rwsem to safely retrieve the buffer
indices from a thread other than consumer or producer
(eg., TIOCINQ ioctl).
Note the read_tail is published _after_ clearing the newline
indicator in read_flags to avoid racing the producer.
Drop read_lock spinlock.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 173 ++++++++++++++++++++++++++++------------------------
1 file changed, 92 insertions(+), 81 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 8f42dde..6691920 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -110,7 +110,6 @@ struct n_tty_data {
struct mutex atomic_read_lock;
struct mutex output_lock;
struct mutex echo_lock;
- raw_spinlock_t read_lock;
};
static inline size_t read_cnt(struct n_tty_data *ldata)
@@ -168,7 +167,10 @@ static int receive_room(struct tty_struct *tty)
*
* Re-schedules the flip buffer work if space just became available.
*
- * Locks: Concurrent update is protected with read_lock
+ * Caller holds exclusive termios_rwsem
+ * or
+ * n_tty_read()/consumer path:
+ * holds non-exclusive termios_rwsem
*/
static void n_tty_set_room(struct tty_struct *tty)
@@ -191,34 +193,27 @@ static void n_tty_set_room(struct tty_struct *tty)
}
}
-static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
-{
- if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
- *read_buf_addr(ldata, ldata->read_head) = c;
- ldata->read_head++;
- }
-}
-
/**
* put_tty_queue - add character to tty
* @c: character
* @ldata: n_tty data
*
- * Add a character to the tty read_buf queue. This is done under the
- * read_lock to serialize character addition and also to protect us
- * against parallel reads or flushes
+ * Add a character to the tty read_buf queue.
+ *
+ * n_tty_receive_buf()/producer path:
+ * caller holds non-exclusive termios_rwsem
+ * modifies read_head
+ *
+ * read_head is only considered 'published' if canonical mode is
+ * not active.
*/
static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
{
- unsigned long flags;
- /*
- * The problem of stomping on the buffers ends here.
- * Why didn't anyone see this one coming? --AJK
- */
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- put_tty_queue_nolock(c, ldata);
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
+ *read_buf_addr(ldata, ldata->read_head) = c;
+ ldata->read_head++;
+ }
}
/**
@@ -228,16 +223,13 @@ static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
* Reset the read buffer counters and clear the flags.
* Called from n_tty_open() and n_tty_flush_buffer().
*
- * Locking: tty_read_lock for read fields.
+ * Locking: caller holds exclusive termios_rwsem
+ * (or locking is not required)
*/
static void reset_buffer_flags(struct n_tty_data *ldata)
{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
mutex_lock(&ldata->echo_lock);
ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
@@ -267,47 +259,55 @@ static void n_tty_packet_mode_flush(struct tty_struct *tty)
* buffer flushed (eg at hangup) or when the N_TTY line discipline
* internally has to clean the pending queue (for example some signals).
*
- * Locking: ctrl_lock, read_lock.
+ * Holds termios_rwsem to exclude producer/consumer while
+ * buffer indices are reset.
+ *
+ * Locking: ctrl_lock, exclusive termios_rwsem
*/
static void n_tty_flush_buffer(struct tty_struct *tty)
{
+ down_write(&tty->termios_rwsem);
reset_buffer_flags(tty->disc_data);
n_tty_set_room(tty);
if (tty->link)
n_tty_packet_mode_flush(tty);
+ up_write(&tty->termios_rwsem);
}
-/**
- * n_tty_chars_in_buffer - report available bytes
- * @tty: tty device
- *
- * Report the number of characters buffered to be delivered to user
- * at this instant in time.
- *
- * Locking: read_lock
- */
-
static ssize_t chars_in_buffer(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
- unsigned long flags;
ssize_t n = 0;
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
if (!ldata->icanon)
n = read_cnt(ldata);
else
n = ldata->canon_head - ldata->read_tail;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
return n;
}
+/**
+ * n_tty_chars_in_buffer - report available bytes
+ * @tty: tty device
+ *
+ * Report the number of characters buffered to be delivered to user
+ * at this instant in time.
+ *
+ * Locking: exclusive termios_rwsem
+ */
+
static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
{
+ ssize_t n;
+
WARN_ONCE(1, "%s is deprecated and scheduled for removal.", __func__);
- return chars_in_buffer(tty);
+
+ down_write(&tty->termios_rwsem);
+ n = chars_in_buffer(tty);
+ up_write(&tty->termios_rwsem);
+ return n;
}
/**
@@ -916,7 +916,12 @@ static inline void finish_erasing(struct n_tty_data *ldata)
* present in the stream from the driver layer. Handles the complexities
* of UTF-8 multibyte symbols.
*
- * Locking: read_lock for tty buffers
+ * n_tty_receive_buf()/producer path:
+ * caller holds non-exclusive termios_rwsem
+ * modifies read_head
+ *
+ * Modifying the read_head is not considered a publish in this context
+ * because canonical mode is active -- only canon_head publishes
*/
static void eraser(unsigned char c, struct tty_struct *tty)
@@ -926,9 +931,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
size_t head;
size_t cnt;
int seen_alnums;
- unsigned long flags;
- /* FIXME: locking needed ? */
if (ldata->read_head == ldata->canon_head) {
/* process_output('\a', tty); */ /* what do you think? */
return;
@@ -939,15 +942,11 @@ static void eraser(unsigned char c, struct tty_struct *tty)
kill_type = WERASE;
else {
if (!L_ECHO(tty)) {
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = ldata->canon_head;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
return;
}
if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = ldata->canon_head;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
finish_erasing(ldata);
echo_char(KILL_CHAR(tty), tty);
/* Add a newline if ECHOK is on and ECHOKE is off. */
@@ -959,7 +958,6 @@ static void eraser(unsigned char c, struct tty_struct *tty)
}
seen_alnums = 0;
- /* FIXME: Locking ?? */
while (ldata->read_head != ldata->canon_head) {
head = ldata->read_head;
@@ -981,9 +979,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
break;
}
cnt = ldata->read_head - head;
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = head;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
if (!ldata->erasing) {
@@ -1072,7 +1068,11 @@ static inline void isig(int sig, struct tty_struct *tty)
* An RS232 break event has been hit in the incoming bitstream. This
* can cause a variety of events depending upon the termios settings.
*
- * Called from the receive_buf path so single threaded.
+ * n_tty_receive_buf()/producer path:
+ * caller holds non-exclusive termios_rwsem
+ * publishes read_head via put_tty_queue()
+ *
+ * Note: may get exclusive termios_rwsem if flushing input buffer
*/
static inline void n_tty_receive_break(struct tty_struct *tty)
@@ -1084,8 +1084,11 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
if (I_BRKINT(tty)) {
isig(SIGINT, tty);
if (!L_NOFLSH(tty)) {
+ /* flushing needs exclusive termios_rwsem */
+ up_read(&tty->termios_rwsem);
n_tty_flush_buffer(tty);
tty_driver_flush_buffer(tty);
+ down_read(&tty->termios_rwsem);
}
return;
}
@@ -1132,7 +1135,11 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty)
* @c: character
*
* Process a parity error and queue the right data to indicate
- * the error case if necessary. Locking as per n_tty_receive_buf.
+ * the error case if necessary.
+ *
+ * n_tty_receive_buf()/producer path:
+ * caller holds non-exclusive termios_rwsem
+ * publishes read_head via put_tty_queue()
*/
static inline void n_tty_receive_parity_error(struct tty_struct *tty,
unsigned char c)
@@ -1160,12 +1167,16 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty,
* Process an individual character of input received from the driver.
* This is serialized with respect to itself by the rules for the
* driver above.
+ *
+ * n_tty_receive_buf()/producer path:
+ * caller holds non-exclusive termios_rwsem
+ * publishes canon_head if canonical mode is active
+ * otherwise, publishes read_head via put_tty_queue()
*/
static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
- unsigned long flags;
int parmrk;
if (ldata->raw) {
@@ -1254,8 +1265,11 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (c == SUSP_CHAR(tty)) {
send_signal:
if (!L_NOFLSH(tty)) {
+ /* flushing needs exclusive termios_rwsem */
+ up_read(&tty->termios_rwsem);
n_tty_flush_buffer(tty);
tty_driver_flush_buffer(tty);
+ down_read(&tty->termios_rwsem);
}
if (I_IXON(tty))
start_tty(tty);
@@ -1356,11 +1370,9 @@ send_signal:
put_tty_queue(c, ldata);
handle_newline:
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags);
- put_tty_queue_nolock(c, ldata);
+ put_tty_queue(c, ldata);
ldata->canon_head = ldata->read_head;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
@@ -1421,6 +1433,10 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
* been received. This function must be called from soft contexts
* not from interrupt context. The driver is responsible for making
* calls one at a time and in order (or using flush_to_ldisc)
+ *
+ * n_tty_receive_buf()/producer path:
+ * claims non-exclusive termios_rwsem
+ * publishes read_head and canon_head
*/
static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
@@ -1431,10 +1447,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *f, flags = TTY_NORMAL;
int i;
char buf[64];
- unsigned long cpuflags;
if (ldata->real_raw) {
- raw_spin_lock_irqsave(&ldata->read_lock, cpuflags);
i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1)));
i = min(count, i);
@@ -1448,7 +1462,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
i = min(count, i);
memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
ldata->read_head += i;
- raw_spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
} else {
for (i = count, p = cp, f = fp; i; i--, p++) {
if (f)
@@ -1675,7 +1688,6 @@ static int n_tty_open(struct tty_struct *tty)
mutex_init(&ldata->atomic_read_lock);
mutex_init(&ldata->output_lock);
mutex_init(&ldata->echo_lock);
- raw_spin_lock_init(&ldata->read_lock);
/* These are ugly. Currently a malloc failure here can panic */
ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
@@ -1731,6 +1743,9 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
*
* Called under the ldata->atomic_read_lock sem
*
+ * n_tty_read()/consumer path:
+ * caller holds non-exclusive termios_rwsem
+ * read_tail published
*/
static int copy_from_read_buf(struct tty_struct *tty,
@@ -1741,27 +1756,22 @@ static int copy_from_read_buf(struct tty_struct *tty,
struct n_tty_data *ldata = tty->disc_data;
int retval;
size_t n;
- unsigned long flags;
bool is_eof;
size_t tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
retval = 0;
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
n = min(read_cnt(ldata), N_TTY_BUF_SIZE - tail);
n = min(*nr, n);
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n) {
retval = copy_to_user(*b, read_buf_addr(ldata, tail), n);
n -= retval;
is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty);
tty_audit_add_data(tty, read_buf_addr(ldata, tail), n,
ldata->icanon);
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_tail += n;
/* Turn single EOF into zero-length read */
if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
n = 0;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
*b += n;
*nr -= n;
}
@@ -1779,6 +1789,10 @@ static int copy_from_read_buf(struct tty_struct *tty,
* character into the user-space buffer.
*
* Called under the atomic_read_lock mutex
+ *
+ * n_tty_read()/consumer path:
+ * caller holds non-exclusive termios_rwsem
+ * read_tail published
*/
static int canon_copy_from_read_buf(struct tty_struct *tty,
@@ -1786,21 +1800,15 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
size_t *nr)
{
struct n_tty_data *ldata = tty->disc_data;
- unsigned long flags;
size_t n, size, more, c;
size_t eol;
size_t tail;
int ret, found = 0;
/* N.B. avoid overrun if nr == 0 */
-
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
-
n = min(*nr, read_cnt(ldata));
- if (!n) {
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ if (!n)
return 0;
- }
tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
size = min_t(size_t, tail + n, N_TTY_BUF_SIZE);
@@ -1828,8 +1836,6 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu size:%zu more:%zu\n",
__func__, eol, found, n, c, size, more);
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
-
if (n > size) {
ret = copy_to_user(*b, read_buf_addr(ldata, tail), size);
if (ret)
@@ -1843,11 +1849,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
*b += n;
*nr -= n;
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_tail += c;
if (found)
- __clear_bit(eol, ldata->read_flags);
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ clear_bit(eol, ldata->read_flags);
+ smp_mb__after_clear_bit();
+ ldata->read_tail += c;
if (found)
tty_audit_push(tty);
@@ -1911,6 +1916,10 @@ static int job_control(struct tty_struct *tty, struct file *file)
* a hangup. Always called in user context, may sleep.
*
* This code must be sure never to sleep through a hangup.
+ *
+ * n_tty_read()/consumer path:
+ * claims non-exclusive termios_rwsem
+ * publishes read_tail
*/
static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
@@ -2277,10 +2286,12 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
case TIOCOUTQ:
return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
- /* FIXME: Locking */
- retval = read_cnt(ldata);
+ down_write(&tty->termios_rwsem);
if (L_ICANON(tty))
retval = inq_canon(ldata);
+ else
+ retval = read_cnt(ldata);
+ up_write(&tty->termios_rwsem);
return put_user(retval, (unsigned int __user *) arg);
default:
return n_tty_ioctl_helper(tty, file, cmd, arg);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 15/24] n_tty: Reset lnext if canonical mode changes
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (13 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 14/24] n_tty: Make N_TTY ldisc receive path lockless Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 16/24] n_tty: Fix type mismatches in receive_buf raw copy Peter Hurley
` (11 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
lnext escapes the next input character as a literal, and must
be reset when canonical mode changes (to avoid misinterpreting
a special character as a literal if canonical mode is changed
back again).
lnext is specifically not reset on a buffer flush so as to avoid
misinterpreting the next input character as a special character.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 6691920..98bc9df 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1575,6 +1575,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
ldata->canon_head = ldata->read_tail;
ldata->erasing = 0;
+ ldata->lnext = 0;
}
if (canon_change && !L_ICANON(tty) && read_cnt(ldata))
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 16/24] n_tty: Fix type mismatches in receive_buf raw copy
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (14 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 15/24] n_tty: Reset lnext if canonical mode changes Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 17/24] n_tty: Don't wait for buffer work in read() loop Peter Hurley
` (10 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 98bc9df..c81c270 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1445,24 +1445,27 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
struct n_tty_data *ldata = tty->disc_data;
const unsigned char *p;
char *f, flags = TTY_NORMAL;
- int i;
char buf[64];
if (ldata->real_raw) {
- i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
- N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1)));
- i = min(count, i);
- memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
- ldata->read_head += i;
- cp += i;
- count -= i;
-
- i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
- N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1)));
- i = min(count, i);
- memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
- ldata->read_head += i;
+ size_t n, head;
+
+ head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
+ n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
+ n = min_t(size_t, count, n);
+ memcpy(read_buf_addr(ldata, head), cp, n);
+ ldata->read_head += n;
+ cp += n;
+ count -= n;
+
+ head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
+ n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
+ n = min_t(size_t, count, n);
+ memcpy(read_buf_addr(ldata, head), cp, n);
+ ldata->read_head += n;
} else {
+ int i;
+
for (i = count, p = cp, f = fp; i; i--, p++) {
if (f)
flags = *f++;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 17/24] n_tty: Don't wait for buffer work in read() loop
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (15 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 16/24] n_tty: Fix type mismatches in receive_buf raw copy Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 18/24] n_tty: Separate buffer indices to prevent cache-line sharing Peter Hurley
` (9 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
User-space read() can run concurrently with receiving from device;
waiting for receive_buf() to complete is not required.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index c81c270..2ce01aa 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1722,7 +1722,6 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
{
struct n_tty_data *ldata = tty->disc_data;
- tty_flush_to_ldisc(tty);
if (ldata->icanon && !L_EXTPROC(tty)) {
if (ldata->canon_head != ldata->read_tail)
return 1;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 18/24] n_tty: Separate buffer indices to prevent cache-line sharing
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (16 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 17/24] n_tty: Don't wait for buffer work in read() loop Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 19/24] tty: Only guarantee termios read safety for throttle/unthrottle Peter Hurley
` (8 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
If the read buffer indices are in the same cache-line, cpus will
contended over the cache-line (so called 'false sharing').
Separate the producer-published fields from the consumer-published
fields; document the locks relevant to each field.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 2ce01aa..3d334ef 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -82,29 +82,38 @@
#endif
struct n_tty_data {
- unsigned int column;
+ /* producer-published */
+ size_t read_head;
+ size_t canon_head;
+ DECLARE_BITMAP(process_char_map, 256);
+
+ /* private to n_tty_receive_overrun (single-threaded) */
unsigned long overrun_time;
int num_overrun;
/* non-atomic */
bool no_room;
+ /* must hold exclusive termios_rwsem to reset these */
unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
unsigned char echo_overrun:1;
- DECLARE_BITMAP(process_char_map, 256);
+ /* shared by producer and consumer */
+ char *read_buf;
DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
- char *read_buf;
- size_t read_head;
- size_t read_tail;
int minimum_to_wake;
+ /* consumer-published */
+ size_t read_tail;
+
+ /* protected by echo_lock */
unsigned char *echo_buf;
unsigned int echo_pos;
unsigned int echo_cnt;
- size_t canon_head;
+ /* protected by output lock */
+ unsigned int column;
unsigned int canon_column;
struct mutex atomic_read_lock;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 19/24] tty: Only guarantee termios read safety for throttle/unthrottle
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (17 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 18/24] n_tty: Separate buffer indices to prevent cache-line sharing Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 20/24] n_tty: Move chars_in_buffer() to factor throttle/unthrottle Peter Hurley
` (7 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
No tty driver modifies termios during throttle() or unthrottle().
Therefore, only read safety is required.
However, tty_throttle_safe and tty_unthrottle_safe must still be
mutually exclusive; introduce throttle_mutex for that purpose.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 4 ----
drivers/tty/tty_io.c | 1 +
drivers/tty/tty_ioctl.c | 8 ++++----
include/linux/tty.h | 1 +
4 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 3d334ef..dba7e99 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1519,9 +1519,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE)
break;
- up_read(&tty->termios_rwsem);
throttled = tty_throttle_safe(tty);
- down_read(&tty->termios_rwsem);
if (!throttled)
break;
}
@@ -2084,9 +2082,7 @@ do_it_again:
if (!tty->count)
break;
n_tty_set_room(tty);
- up_read(&tty->termios_rwsem);
unthrottled = tty_unthrottle_safe(tty);
- down_read(&tty->termios_rwsem);
if (!unthrottled)
break;
}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 30201e6..55b8594 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2951,6 +2951,7 @@ void initialize_tty_struct(struct tty_struct *tty,
tty->session = NULL;
tty->pgrp = NULL;
mutex_init(&tty->legacy_mutex);
+ mutex_init(&tty->throttle_mutex);
init_rwsem(&tty->termios_rwsem);
init_ldsem(&tty->ldisc_sem);
init_waitqueue_head(&tty->write_wait);
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 490e499..5e55ca4 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -151,7 +151,7 @@ int tty_throttle_safe(struct tty_struct *tty)
{
int ret = 0;
- down_write(&tty->termios_rwsem);
+ mutex_lock(&tty->throttle_mutex);
if (!test_bit(TTY_THROTTLED, &tty->flags)) {
if (tty->flow_change != TTY_THROTTLE_SAFE)
ret = 1;
@@ -161,7 +161,7 @@ int tty_throttle_safe(struct tty_struct *tty)
tty->ops->throttle(tty);
}
}
- up_write(&tty->termios_rwsem);
+ mutex_unlock(&tty->throttle_mutex);
return ret;
}
@@ -182,7 +182,7 @@ int tty_unthrottle_safe(struct tty_struct *tty)
{
int ret = 0;
- down_write(&tty->termios_rwsem);
+ mutex_lock(&tty->throttle_mutex);
if (test_bit(TTY_THROTTLED, &tty->flags)) {
if (tty->flow_change != TTY_UNTHROTTLE_SAFE)
ret = 1;
@@ -192,7 +192,7 @@ int tty_unthrottle_safe(struct tty_struct *tty)
tty->ops->unthrottle(tty);
}
}
- up_write(&tty->termios_rwsem);
+ mutex_unlock(&tty->throttle_mutex);
return ret;
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 1d1c7c6a..e56ab4c 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -244,6 +244,7 @@ struct tty_struct {
struct mutex atomic_write_lock;
struct mutex legacy_mutex;
+ struct mutex throttle_mutex;
struct rw_semaphore termios_rwsem;
spinlock_t ctrl_lock;
/* Termios values are protected by the termios rwsem */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 20/24] n_tty: Move chars_in_buffer() to factor throttle/unthrottle
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (18 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 19/24] tty: Only guarantee termios read safety for throttle/unthrottle Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 21/24] n_tty: Factor throttle/unthrottle into helper functions Peter Hurley
` (6 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Prepare to factor throttle and unthrottle into helper functions;
relocate chars_in_buffer() to avoid forward declaration.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index dba7e99..d905b45 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -202,6 +202,18 @@ static void n_tty_set_room(struct tty_struct *tty)
}
}
+static ssize_t chars_in_buffer(struct tty_struct *tty)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ ssize_t n = 0;
+
+ if (!ldata->icanon)
+ n = read_cnt(ldata);
+ else
+ n = ldata->canon_head - ldata->read_tail;
+ return n;
+}
+
/**
* put_tty_queue - add character to tty
* @c: character
@@ -285,18 +297,6 @@ static void n_tty_flush_buffer(struct tty_struct *tty)
up_write(&tty->termios_rwsem);
}
-static ssize_t chars_in_buffer(struct tty_struct *tty)
-{
- struct n_tty_data *ldata = tty->disc_data;
- ssize_t n = 0;
-
- if (!ldata->icanon)
- n = read_cnt(ldata);
- else
- n = ldata->canon_head - ldata->read_tail;
- return n;
-}
-
/**
* n_tty_chars_in_buffer - report available bytes
* @tty: tty device
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 21/24] n_tty: Factor throttle/unthrottle into helper functions
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (19 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 20/24] n_tty: Move chars_in_buffer() to factor throttle/unthrottle Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 22/24] n_tty: Move n_tty_write_wakeup() to avoid forward declaration Peter Hurley
` (5 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Prepare for special handling of pty throttle/unthrottle; factor
flow control into helper functions.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 81 ++++++++++++++++++++++++++++++-----------------------
1 file changed, 46 insertions(+), 35 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d905b45..7f3509d 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -214,6 +214,50 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
return n;
}
+static inline void n_tty_check_throttle(struct tty_struct *tty)
+{
+ /*
+ * Check the remaining room for the input canonicalization
+ * mode. We don't want to throttle the driver if we're in
+ * canonical mode and don't have a newline yet!
+ */
+ while (1) {
+ int throttled;
+ tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
+ if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE)
+ break;
+ throttled = tty_throttle_safe(tty);
+ if (!throttled)
+ break;
+ }
+ __tty_set_flow_change(tty, 0);
+}
+
+static inline void n_tty_check_unthrottle(struct tty_struct *tty)
+{
+ /* If there is enough space in the read buffer now, let the
+ * low-level driver know. We use chars_in_buffer() to
+ * check the buffer, as it now knows about canonical mode.
+ * Otherwise, if the driver is throttled and the line is
+ * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode,
+ * we won't get any more characters.
+ */
+
+ while (1) {
+ int unthrottled;
+ tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
+ if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
+ break;
+ if (!tty->count)
+ break;
+ n_tty_set_room(tty);
+ unthrottled = tty_unthrottle_safe(tty);
+ if (!unthrottled)
+ break;
+ }
+ __tty_set_flow_change(tty, 0);
+}
+
/**
* put_tty_queue - add character to tty
* @c: character
@@ -1509,21 +1553,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
wake_up_interruptible(&tty->read_wait);
}
- /*
- * Check the remaining room for the input canonicalization
- * mode. We don't want to throttle the driver if we're in
- * canonical mode and don't have a newline yet!
- */
- while (1) {
- int throttled;
- tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
- if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE)
- break;
- throttled = tty_throttle_safe(tty);
- if (!throttled)
- break;
- }
- __tty_set_flow_change(tty, 0);
+ n_tty_check_throttle(tty);
}
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
@@ -2067,26 +2097,7 @@ do_it_again:
}
}
- /* If there is enough space in the read buffer now, let the
- * low-level driver know. We use chars_in_buffer() to
- * check the buffer, as it now knows about canonical mode.
- * Otherwise, if the driver is throttled and the line is
- * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode,
- * we won't get any more characters.
- */
- while (1) {
- int unthrottled;
- tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
- if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
- break;
- if (!tty->count)
- break;
- n_tty_set_room(tty);
- unthrottled = tty_unthrottle_safe(tty);
- if (!unthrottled)
- break;
- }
- __tty_set_flow_change(tty, 0);
+ n_tty_check_unthrottle(tty);
if (b - buf >= minimum)
break;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 22/24] n_tty: Move n_tty_write_wakeup() to avoid forward declaration
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (20 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 21/24] n_tty: Factor throttle/unthrottle into helper functions Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 23/24] n_tty: Special case pty flow control Peter Hurley
` (4 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Prepare to special case pty flow control; avoid forward declaration.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 31 +++++++++++++++----------------
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 7f3509d..00debd0 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -214,6 +214,21 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
return n;
}
+/**
+ * n_tty_write_wakeup - asynchronous I/O notifier
+ * @tty: tty device
+ *
+ * Required for the ptys, serial driver etc. since processes
+ * that attach themselves to the master and rely on ASYNC
+ * IO must be woken up
+ */
+
+static void n_tty_write_wakeup(struct tty_struct *tty)
+{
+ if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags))
+ kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
+}
+
static inline void n_tty_check_throttle(struct tty_struct *tty)
{
/*
@@ -1459,22 +1474,6 @@ handle_newline:
put_tty_queue(c, ldata);
}
-
-/**
- * n_tty_write_wakeup - asynchronous I/O notifier
- * @tty: tty device
- *
- * Required for the ptys, serial driver etc. since processes
- * that attach themselves to the master and rely on ASYNC
- * IO must be woken up
- */
-
-static void n_tty_write_wakeup(struct tty_struct *tty)
-{
- if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags))
- kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
-}
-
/**
* n_tty_receive_buf - data receive
* @tty: terminal device
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 23/24] n_tty: Special case pty flow control
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (21 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 22/24] n_tty: Move n_tty_write_wakeup() to avoid forward declaration Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:19 ` [PATCH v3 24/24] n_tty: Queue buffer work on any available cpu Peter Hurley
` (3 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
The pty driver forces ldisc flow control on, regardless of available
receive buffer space, so the writer can be woken whenever unthrottle
is called. However, this 'forced throttle' has performance
consequences, as multiple atomic operations are necessary to
unthrottle and perform the write wakeup for every input line (in
canonical mode).
Instead, short-circuit the unthrottle if the tty is a pty and perform
the write wakeup directly.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 00debd0..5211de2 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -231,6 +231,8 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
static inline void n_tty_check_throttle(struct tty_struct *tty)
{
+ if (tty->driver->type == TTY_DRIVER_TYPE_PTY)
+ return;
/*
* Check the remaining room for the input canonicalization
* mode. We don't want to throttle the driver if we're in
@@ -250,6 +252,17 @@ static inline void n_tty_check_throttle(struct tty_struct *tty)
static inline void n_tty_check_unthrottle(struct tty_struct *tty)
{
+ if (tty->driver->type == TTY_DRIVER_TYPE_PTY) {
+ if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
+ return;
+ if (!tty->count)
+ return;
+ n_tty_set_room(tty);
+ n_tty_write_wakeup(tty->link);
+ wake_up_interruptible_poll(&tty->link->write_wait, POLLOUT);
+ return;
+ }
+
/* If there is enough space in the read buffer now, let the
* low-level driver know. We use chars_in_buffer() to
* check the buffer, as it now knows about canonical mode.
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 24/24] n_tty: Queue buffer work on any available cpu
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (22 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 23/24] n_tty: Special case pty flow control Peter Hurley
@ 2013-04-15 15:19 ` Peter Hurley
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (2 subsequent siblings)
26 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Jiri Slaby, Peter Hurley
Scheduling buffer work on the same cpu as the read() thread
limits the parallelism now possible between the receive_buf path
and the n_tty_read() path.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 5211de2..4dbb558 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -198,7 +198,7 @@ static void n_tty_set_room(struct tty_struct *tty)
*/
WARN_RATELIMIT(test_bit(TTY_LDISC_HALTED, &tty->flags),
"scheduling buffer work for halted ldisc\n");
- schedule_work(&tty->port->buf.work);
+ queue_work(system_unbound_wq, &tty->port->buf.work);
}
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 00/16] lockless tty flip buffers
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (23 preceding siblings ...)
2013-04-15 15:19 ` [PATCH v3 24/24] n_tty: Queue buffer work on any available cpu Peter Hurley
@ 2013-04-15 15:25 ` Peter Hurley
2013-04-15 15:25 ` [PATCH 01/16] tty: Compute flip buffer ptrs Peter Hurley
` (16 more replies)
2013-04-15 20:14 ` [PATCH v3 00/24] lockless n_tty receive path Greg Kroah-Hartman
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
26 siblings, 17 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:25 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
This 2nd of 4 patchsets implements lockless receive from the tty driver.
By lockless, I'm referring to the 'lock' spin lock formerly used to
serialize access to the flip buffer list.
Since the driver-side flip buffer usage is already single-threaded and
line discipline receiving is already single-threaded, implementing
a lockless flip buffer list was the primary hurdle. [The only 2 flip
buffer consumers, flush_to_ldisc() and tty_buffer_flush() were already
mutually exclusive and this exclusion remains although the mechanism
is changed.]
Since the flip buffer consumers, flush_to_ldisc() and tty_buffer_flush(),
already leave the last-consumed flip buffer on the list, and since the
existing flip buffer api is already divided into an add/commit interface,
most of the requirement for a lockless algorithm was already
in-place. The main differences are;
1) the initial state of the flip buffer list points head and tail
to a 0-sized sentinel flip buffer. This eliminates head & tail NULL
testing and assigning the head ptr from the driver-side thread. This
sentinel is 'consumed' on the first iteration of ldisc receiving and
does not require special-case logic.
2) the free list uses the atomic singly-linked llist interface. While
this guarantees safe concurrent usage by both producer and consumer,
it's not optimal. Both producer and consumer unnecessarily contend
over the free list head ptr; a better approach would be to maintain
an unconsumed buffer in the same way the flip buffer list works.
Light testing has shown this contention accounts for roughly 5% of
total cpu time in end-to-end copying.
3) The mutual exclusion between consumers is reimplemented as a mutex;
this eliminates the need to drop the lock across the ldisc
receive_buf() method. This mutual exclusion is extended to a public
interface which the vt driver now uses to safely utilize the ldisc
receive_buf() interface when pasting a selection.
Peter Hurley (16):
tty: Compute flip buffer ptrs
tty: Fix flip buffer free list
tty: Factor flip buffer initialization into helper function
tty: Merge tty_buffer_find() into tty_buffer_alloc()
tty: Use generic names for flip buffer list cursors
tty: Use lockless flip buffer free list
tty: Simplify flip buffer list with 0-sized sentinel
tty: Track flip buffer memory limit atomically
tty: Make driver-side flip buffers lockless
tty: Ensure single-threaded flip buffer consumer with mutex
tty: Only perform flip buffer flush from tty_buffer_flush()
tty: Avoid false-sharing flip buffer ptrs
tty: Use non-atomic state to signal flip buffer flush pending
tty: Merge __tty_flush_buffer() into lone call site
tty: Fix unsafe vt paste_selection()
tty: Remove private constant from global namespace
drivers/staging/dgrp/dgrp_tty.c | 2 +
drivers/tty/pty.c | 10 +-
drivers/tty/tty_buffer.c | 395 +++++++++++++++++++---------------------
drivers/tty/vt/selection.c | 4 +-
include/linux/llist.h | 23 +++
include/linux/tty.h | 39 ++--
include/linux/tty_flip.h | 8 +-
7 files changed, 244 insertions(+), 237 deletions(-)
--
1.8.1.2
^ permalink raw reply [flat|nested] 238+ messages in thread* [PATCH 01/16] tty: Compute flip buffer ptrs
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
@ 2013-04-15 15:25 ` Peter Hurley
2013-04-15 15:25 ` [PATCH 02/16] tty: Fix flip buffer free list Peter Hurley
` (15 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:25 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
The char_buf_ptr and flag_buf_ptr values are trivially derived from
the .data field offset; compute values as needed.
Fixes a long-standing type-mismatch with the char and flag ptrs.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 22 ++++++++++------------
include/linux/tty.h | 12 ++++++++++--
include/linux/tty_flip.h | 4 ++--
3 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index ff1b2e3..170674c 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -71,8 +71,6 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
p->next = NULL;
p->commit = 0;
p->read = 0;
- p->char_buf_ptr = (char *)(p->data);
- p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
port->buf.memory_used += size;
return p;
}
@@ -265,8 +263,8 @@ int tty_insert_flip_string_fixed_flag(struct tty_port *port,
if (unlikely(space == 0)) {
break;
}
- memcpy(tb->char_buf_ptr + tb->used, chars, space);
- memset(tb->flag_buf_ptr + tb->used, flag, space);
+ memcpy(char_buf_ptr(tb, tb->used), chars, space);
+ memset(flag_buf_ptr(tb, tb->used), flag, space);
tb->used += space;
copied += space;
chars += space;
@@ -303,8 +301,8 @@ int tty_insert_flip_string_flags(struct tty_port *port,
if (unlikely(space == 0)) {
break;
}
- memcpy(tb->char_buf_ptr + tb->used, chars, space);
- memcpy(tb->flag_buf_ptr + tb->used, flags, space);
+ memcpy(char_buf_ptr(tb, tb->used), chars, space);
+ memcpy(flag_buf_ptr(tb, tb->used), flags, space);
tb->used += space;
copied += space;
chars += space;
@@ -364,8 +362,8 @@ int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars,
int space = tty_buffer_request_room(port, size);
if (likely(space)) {
struct tty_buffer *tb = port->buf.tail;
- *chars = tb->char_buf_ptr + tb->used;
- memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+ *chars = char_buf_ptr(tb, tb->used);
+ memset(flag_buf_ptr(tb, tb->used), TTY_NORMAL, space);
tb->used += space;
}
return space;
@@ -394,8 +392,8 @@ int tty_prepare_flip_string_flags(struct tty_port *port,
int space = tty_buffer_request_room(port, size);
if (likely(space)) {
struct tty_buffer *tb = port->buf.tail;
- *chars = tb->char_buf_ptr + tb->used;
- *flags = tb->flag_buf_ptr + tb->used;
+ *chars = char_buf_ptr(tb, tb->used);
+ *flags = flag_buf_ptr(tb, tb->used);
tb->used += space;
}
return space;
@@ -407,8 +405,8 @@ static int
receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
{
struct tty_ldisc *disc = tty->ldisc;
- char *p = head->char_buf_ptr + head->read;
- unsigned char *f = head->flag_buf_ptr + head->read;
+ unsigned char *p = char_buf_ptr(head, head->read);
+ char *f = flag_buf_ptr(head, head->read);
if (disc->ops->receive_buf2)
count = disc->ops->receive_buf2(tty, p, f, count);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index e56ab4c..c0ee322 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -31,8 +31,6 @@
struct tty_buffer {
struct tty_buffer *next;
- char *char_buf_ptr;
- unsigned char *flag_buf_ptr;
int used;
int size;
int commit;
@@ -41,6 +39,16 @@ struct tty_buffer {
unsigned long data[0];
};
+static inline unsigned char *char_buf_ptr(struct tty_buffer *b, int ofs)
+{
+ return ((unsigned char *)b->data) + ofs;
+}
+
+static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
+{
+ return (char *)char_buf_ptr(b, ofs) + b->size;
+}
+
/*
* We default to dicing tty buffer allocations to this many characters
* in order to avoid multiple page allocations. We know the size of
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index e0f2526..ad03039 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -18,8 +18,8 @@ static inline int tty_insert_flip_char(struct tty_port *port,
{
struct tty_buffer *tb = port->buf.tail;
if (tb && tb->used < tb->size) {
- tb->flag_buf_ptr[tb->used] = flag;
- tb->char_buf_ptr[tb->used++] = ch;
+ *flag_buf_ptr(tb, tb->used) = flag;
+ *char_buf_ptr(tb, tb->used++) = ch;
return 1;
}
return tty_insert_flip_string_flags(port, &ch, &flag, 1);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 02/16] tty: Fix flip buffer free list
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
2013-04-15 15:25 ` [PATCH 01/16] tty: Compute flip buffer ptrs Peter Hurley
@ 2013-04-15 15:25 ` Peter Hurley
2013-04-15 15:25 ` [PATCH 03/16] tty: Factor flip buffer initialization into helper function Peter Hurley
` (14 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:25 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Since flip buffers are size-aligned to 256 bytes and all flip
buffers 512-bytes or larger are not added to the free list, the
free list only contains 256-byte flip buffers.
Remove the list search when allocating a new flip buffer.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 170674c..a5e3962 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -18,6 +18,10 @@
#include <linux/module.h>
#include <linux/ratelimit.h>
+
+#define MIN_TTYB_SIZE 256
+#define TTYB_ALIGN_MASK 255
+
/**
* tty_buffer_free_all - free buffers used by a tty
* @tty: tty to free from
@@ -94,7 +98,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
buf->memory_used -= b->size;
WARN_ON(buf->memory_used < 0);
- if (b->size >= 512)
+ if (b->size > MIN_TTYB_SIZE)
kfree(b);
else {
b->next = buf->free;
@@ -176,9 +180,10 @@ void tty_buffer_flush(struct tty_struct *tty)
static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
{
struct tty_buffer **tbh = &port->buf.free;
- while ((*tbh) != NULL) {
- struct tty_buffer *t = *tbh;
- if (t->size >= size) {
+ if (size <= MIN_TTYB_SIZE) {
+ if (*tbh) {
+ struct tty_buffer *t = *tbh;
+
*tbh = t->next;
t->next = NULL;
t->used = 0;
@@ -187,10 +192,9 @@ static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
port->buf.memory_used += t->size;
return t;
}
- tbh = &((*tbh)->next);
}
/* Round the buffer size out */
- size = (size + 0xFF) & ~0xFF;
+ size = __ALIGN_MASK(size, TTYB_ALIGN_MASK);
return tty_buffer_alloc(port, size);
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 03/16] tty: Factor flip buffer initialization into helper function
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
2013-04-15 15:25 ` [PATCH 01/16] tty: Compute flip buffer ptrs Peter Hurley
2013-04-15 15:25 ` [PATCH 02/16] tty: Fix flip buffer free list Peter Hurley
@ 2013-04-15 15:25 ` Peter Hurley
2013-04-15 15:25 ` [PATCH 04/16] tty: Merge tty_buffer_find() into tty_buffer_alloc() Peter Hurley
` (13 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:25 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Factor shared code; prepare for adding 0-sized sentinel flip buffer.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index a5e3962..56d4602 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -22,6 +22,15 @@
#define MIN_TTYB_SIZE 256
#define TTYB_ALIGN_MASK 255
+static void tty_buffer_reset(struct tty_buffer *p, size_t size)
+{
+ p->used = 0;
+ p->size = size;
+ p->next = NULL;
+ p->commit = 0;
+ p->read = 0;
+}
+
/**
* tty_buffer_free_all - free buffers used by a tty
* @tty: tty to free from
@@ -70,11 +79,8 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if (p == NULL)
return NULL;
- p->used = 0;
- p->size = size;
- p->next = NULL;
- p->commit = 0;
- p->read = 0;
+
+ tty_buffer_reset(p, size);
port->buf.memory_used += size;
return p;
}
@@ -185,10 +191,7 @@ static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
struct tty_buffer *t = *tbh;
*tbh = t->next;
- t->next = NULL;
- t->used = 0;
- t->commit = 0;
- t->read = 0;
+ tty_buffer_reset(t, t->size);
port->buf.memory_used += t->size;
return t;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 04/16] tty: Merge tty_buffer_find() into tty_buffer_alloc()
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (2 preceding siblings ...)
2013-04-15 15:25 ` [PATCH 03/16] tty: Factor flip buffer initialization into helper function Peter Hurley
@ 2013-04-15 15:25 ` Peter Hurley
2013-04-15 15:25 ` [PATCH 05/16] tty: Use generic names for flip buffer list cursors Peter Hurley
` (12 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:25 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
tty_buffer_find() implements a simple free list lookaside cache.
Merge this functionality into tty_buffer_alloc() to reflect the
more traditional alloc/free symmetry.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 50 +++++++++++++++++-------------------------------
1 file changed, 18 insertions(+), 32 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 56d4602..a428fa2 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -64,6 +64,8 @@ void tty_buffer_free_all(struct tty_port *port)
* @size: desired size (characters)
*
* Allocate a new tty buffer to hold the desired number of characters.
+ * We round our buffers off in 256 character chunks to get better
+ * allocation behaviour.
* Return NULL if out of memory or the allocation would exceed the
* per device queue
*
@@ -72,14 +74,29 @@ void tty_buffer_free_all(struct tty_port *port)
static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
{
+ struct tty_buffer **tbh = &port->buf.free;
struct tty_buffer *p;
+ /* Round the buffer size out */
+ size = __ALIGN_MASK(size, TTYB_ALIGN_MASK);
+
+ if (size <= MIN_TTYB_SIZE) {
+ if (*tbh) {
+ p = *tbh;
+ *tbh = p->next;
+ goto found;
+ }
+ }
+
+ /* Should possibly check if this fails for the largest buffer we
+ have queued and recycle that ? */
if (port->buf.memory_used + size > 65536)
return NULL;
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if (p == NULL)
return NULL;
+found:
tty_buffer_reset(p, size);
port->buf.memory_used += size;
return p;
@@ -172,37 +189,6 @@ void tty_buffer_flush(struct tty_struct *tty)
}
/**
- * tty_buffer_find - find a free tty buffer
- * @tty: tty owning the buffer
- * @size: characters wanted
- *
- * Locate an existing suitable tty buffer or if we are lacking one then
- * allocate a new one. We round our buffers off in 256 character chunks
- * to get better allocation behaviour.
- *
- * Locking: Caller must hold tty->buf.lock
- */
-
-static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
-{
- struct tty_buffer **tbh = &port->buf.free;
- if (size <= MIN_TTYB_SIZE) {
- if (*tbh) {
- struct tty_buffer *t = *tbh;
-
- *tbh = t->next;
- tty_buffer_reset(t, t->size);
- port->buf.memory_used += t->size;
- return t;
- }
- }
- /* Round the buffer size out */
- size = __ALIGN_MASK(size, TTYB_ALIGN_MASK);
- return tty_buffer_alloc(port, size);
- /* Should possibly check if this fails for the largest buffer we
- have queued and recycle that ? */
-}
-/**
* tty_buffer_request_room - grow tty buffer if needed
* @tty: tty structure
* @size: size desired
@@ -230,7 +216,7 @@ int tty_buffer_request_room(struct tty_port *port, size_t size)
if (left < size) {
/* This is the slow path - looking for new buffers to use */
- if ((n = tty_buffer_find(port, size)) != NULL) {
+ if ((n = tty_buffer_alloc(port, size)) != NULL) {
if (b != NULL) {
b->next = n;
b->commit = b->used;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 05/16] tty: Use generic names for flip buffer list cursors
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (3 preceding siblings ...)
2013-04-15 15:25 ` [PATCH 04/16] tty: Merge tty_buffer_find() into tty_buffer_alloc() Peter Hurley
@ 2013-04-15 15:25 ` Peter Hurley
2013-04-15 15:25 ` [PATCH 06/16] tty: Use lockless flip buffer free list Peter Hurley
` (11 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:25 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index a428fa2..0259a76 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -44,15 +44,15 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size)
void tty_buffer_free_all(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- struct tty_buffer *thead;
+ struct tty_buffer *p;
- while ((thead = buf->head) != NULL) {
- buf->head = thead->next;
- kfree(thead);
+ while ((p = buf->head) != NULL) {
+ buf->head = p->next;
+ kfree(p);
}
- while ((thead = buf->free) != NULL) {
- buf->free = thead->next;
- kfree(thead);
+ while ((p = buf->free) != NULL) {
+ buf->free = p->next;
+ kfree(p);
}
buf->tail = NULL;
buf->memory_used = 0;
@@ -143,13 +143,13 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
static void __tty_buffer_flush(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- struct tty_buffer *thead;
+ struct tty_buffer *next;
if (unlikely(buf->head == NULL))
return;
- while ((thead = buf->head->next) != NULL) {
+ while ((next = buf->head->next) != NULL) {
tty_buffer_free(port, buf->head);
- buf->head = thead;
+ buf->head = next;
}
WARN_ON(buf->head != buf->tail);
buf->head->read = buf->head->commit;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 06/16] tty: Use lockless flip buffer free list
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (4 preceding siblings ...)
2013-04-15 15:25 ` [PATCH 05/16] tty: Use generic names for flip buffer list cursors Peter Hurley
@ 2013-04-15 15:25 ` Peter Hurley
2013-04-15 15:25 ` [PATCH 07/16] tty: Simplify flip buffer list with 0-sized sentinel Peter Hurley
` (10 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:25 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
In preparation for lockless flip buffers, make the flip buffer
free list lockless.
NB: using llist is not the optimal solution, as the driver and
buffer work may contend over the llist head unnecessarily. However,
test measurements indicate this contention is low.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 29 ++++++++++++-----------------
include/linux/llist.h | 23 +++++++++++++++++++++++
include/linux/tty.h | 8 ++++++--
3 files changed, 41 insertions(+), 19 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 0259a76..069640e 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -44,16 +44,17 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size)
void tty_buffer_free_all(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- struct tty_buffer *p;
+ struct tty_buffer *p, *next;
+ struct llist_node *llist;
while ((p = buf->head) != NULL) {
buf->head = p->next;
kfree(p);
}
- while ((p = buf->free) != NULL) {
- buf->free = p->next;
+ llist = llist_del_all(&buf->free);
+ llist_for_each_entry_safe(p, next, llist, free)
kfree(p);
- }
+
buf->tail = NULL;
buf->memory_used = 0;
}
@@ -68,22 +69,20 @@ void tty_buffer_free_all(struct tty_port *port)
* allocation behaviour.
* Return NULL if out of memory or the allocation would exceed the
* per device queue
- *
- * Locking: Caller must hold tty->buf.lock
*/
static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
{
- struct tty_buffer **tbh = &port->buf.free;
+ struct llist_node *free;
struct tty_buffer *p;
/* Round the buffer size out */
size = __ALIGN_MASK(size, TTYB_ALIGN_MASK);
if (size <= MIN_TTYB_SIZE) {
- if (*tbh) {
- p = *tbh;
- *tbh = p->next;
+ free = llist_del_first(&port->buf.free);
+ if (free) {
+ p = llist_entry(free, struct tty_buffer, free);
goto found;
}
}
@@ -109,8 +108,6 @@ found:
*
* Free a tty buffer, or add it to the free list according to our
* internal strategy
- *
- * Locking: Caller must hold tty->buf.lock
*/
static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
@@ -123,10 +120,8 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
if (b->size > MIN_TTYB_SIZE)
kfree(b);
- else {
- b->next = buf->free;
- buf->free = b;
- }
+ else
+ llist_add(&b->free, &buf->free);
}
/**
@@ -542,7 +537,7 @@ void tty_buffer_init(struct tty_port *port)
spin_lock_init(&buf->lock);
buf->head = NULL;
buf->tail = NULL;
- buf->free = NULL;
+ init_llist_head(&buf->free);
buf->memory_used = 0;
INIT_WORK(&buf->work, flush_to_ldisc);
}
diff --git a/include/linux/llist.h b/include/linux/llist.h
index a5199f6..97cf31d 100644
--- a/include/linux/llist.h
+++ b/include/linux/llist.h
@@ -125,6 +125,29 @@ static inline void init_llist_head(struct llist_head *list)
(pos) = llist_entry((pos)->member.next, typeof(*(pos)), member))
/**
+ * llist_for_each_entry_safe - iterate over some deleted entries of lock-less list of given type
+ * safe against removal of list entry
+ * @pos: the type * to use as a loop cursor.
+ * @n: another type * to use as temporary storage
+ * @node: the first entry of deleted list entries.
+ * @member: the name of the llist_node with the struct.
+ *
+ * In general, some entries of the lock-less list can be traversed
+ * safely only after being removed from list, so start with an entry
+ * instead of list head.
+ *
+ * If being used on entries deleted from lock-less list directly, the
+ * traverse order is from the newest to the oldest added entry. If
+ * you want to traverse from the oldest to the newest, you must
+ * reverse the order by yourself before traversing.
+ */
+#define llist_for_each_entry_safe(pos, n, node, member) \
+ for (pos = llist_entry((node), typeof(*pos), member); \
+ &pos->member != NULL && \
+ (n = llist_entry(pos->member.next, typeof(*n), member), true); \
+ pos = n)
+
+/**
* llist_empty - tests whether a lock-less list is empty
* @head: the list to test
*
diff --git a/include/linux/tty.h b/include/linux/tty.h
index c0ee322..a01fda7 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -11,6 +11,7 @@
#include <linux/tty_flags.h>
#include <uapi/linux/tty.h>
#include <linux/rwsem.h>
+#include <linux/llist.h>
@@ -30,7 +31,10 @@
#define __DISABLED_CHAR '\0'
struct tty_buffer {
- struct tty_buffer *next;
+ union {
+ struct tty_buffer *next;
+ struct llist_node free;
+ };
int used;
int size;
int commit;
@@ -65,7 +69,7 @@ struct tty_bufhead {
spinlock_t lock;
struct tty_buffer *head; /* Queue head */
struct tty_buffer *tail; /* Active buffer */
- struct tty_buffer *free; /* Free queue head */
+ struct llist_head free; /* Free queue head */
int memory_used; /* Buffer space used excluding
free queue */
};
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 07/16] tty: Simplify flip buffer list with 0-sized sentinel
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (5 preceding siblings ...)
2013-04-15 15:25 ` [PATCH 06/16] tty: Use lockless flip buffer free list Peter Hurley
@ 2013-04-15 15:25 ` Peter Hurley
2013-04-15 15:25 ` [PATCH 08/16] tty: Track flip buffer memory limit atomically Peter Hurley
` (9 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:25 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Use a 0-sized sentinel to avoid assigning the head ptr from
the driver side thread. This also eliminates testing head/tail
for NULL.
When the sentinel is first 'consumed' by the buffer work
(or by tty_buffer_flush()), it is detached from the list but not
freed nor added to the free list. Both buffer work and
tty_buffer_flush() continue to preserve at least 1 flip buffer
to which head & tail is pointed.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 49 ++++++++++++++++++------------------------------
include/linux/tty.h | 1 +
2 files changed, 19 insertions(+), 31 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 069640e..231b7a8 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -49,13 +49,16 @@ void tty_buffer_free_all(struct tty_port *port)
while ((p = buf->head) != NULL) {
buf->head = p->next;
- kfree(p);
+ if (p->size > 0)
+ kfree(p);
}
llist = llist_del_all(&buf->free);
llist_for_each_entry_safe(p, next, llist, free)
kfree(p);
- buf->tail = NULL;
+ tty_buffer_reset(&buf->sentinel, 0);
+ buf->head = &buf->sentinel;
+ buf->tail = &buf->sentinel;
buf->memory_used = 0;
}
@@ -120,7 +123,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
if (b->size > MIN_TTYB_SIZE)
kfree(b);
- else
+ else if (b->size > 0)
llist_add(&b->free, &buf->free);
}
@@ -140,8 +143,6 @@ static void __tty_buffer_flush(struct tty_port *port)
struct tty_bufhead *buf = &port->buf;
struct tty_buffer *next;
- if (unlikely(buf->head == NULL))
- return;
while ((next = buf->head->next) != NULL) {
tty_buffer_free(port, buf->head);
buf->head = next;
@@ -200,23 +201,14 @@ int tty_buffer_request_room(struct tty_port *port, size_t size)
int left;
unsigned long flags;
spin_lock_irqsave(&buf->lock, flags);
- /* OPTIMISATION: We could keep a per tty "zero" sized buffer to
- remove this conditional if its worth it. This would be invisible
- to the callers */
b = buf->tail;
- if (b != NULL)
- left = b->size - b->used;
- else
- left = 0;
+ left = b->size - b->used;
if (left < size) {
/* This is the slow path - looking for new buffers to use */
if ((n = tty_buffer_alloc(port, size)) != NULL) {
- if (b != NULL) {
- b->next = n;
- b->commit = b->used;
- } else
- buf->head = n;
+ b->next = n;
+ b->commit = b->used;
buf->tail = n;
} else
size = left;
@@ -247,10 +239,8 @@ int tty_insert_flip_string_fixed_flag(struct tty_port *port,
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
int space = tty_buffer_request_room(port, goal);
struct tty_buffer *tb = port->buf.tail;
- /* If there is no space then tb may be NULL */
- if (unlikely(space == 0)) {
+ if (unlikely(space == 0))
break;
- }
memcpy(char_buf_ptr(tb, tb->used), chars, space);
memset(flag_buf_ptr(tb, tb->used), flag, space);
tb->used += space;
@@ -285,10 +275,8 @@ int tty_insert_flip_string_flags(struct tty_port *port,
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
int space = tty_buffer_request_room(port, goal);
struct tty_buffer *tb = port->buf.tail;
- /* If there is no space then tb may be NULL */
- if (unlikely(space == 0)) {
+ if (unlikely(space == 0))
break;
- }
memcpy(char_buf_ptr(tb, tb->used), chars, space);
memcpy(flag_buf_ptr(tb, tb->used), flags, space);
tb->used += space;
@@ -322,8 +310,7 @@ void tty_schedule_flip(struct tty_port *port)
WARN_ON(port->low_latency);
spin_lock_irqsave(&buf->lock, flags);
- if (buf->tail != NULL)
- buf->tail->commit = buf->tail->used;
+ buf->tail->commit = buf->tail->used;
spin_unlock_irqrestore(&buf->lock, flags);
schedule_work(&buf->work);
}
@@ -438,8 +425,8 @@ static void flush_to_ldisc(struct work_struct *work)
spin_lock_irqsave(&buf->lock, flags);
if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
- struct tty_buffer *head;
- while ((head = buf->head) != NULL) {
+ while (1) {
+ struct tty_buffer *head = buf->head;
int count;
count = head->commit - head->read;
@@ -509,8 +496,7 @@ void tty_flip_buffer_push(struct tty_port *port)
unsigned long flags;
spin_lock_irqsave(&buf->lock, flags);
- if (buf->tail != NULL)
- buf->tail->commit = buf->tail->used;
+ buf->tail->commit = buf->tail->used;
spin_unlock_irqrestore(&buf->lock, flags);
if (port->low_latency)
@@ -535,8 +521,9 @@ void tty_buffer_init(struct tty_port *port)
struct tty_bufhead *buf = &port->buf;
spin_lock_init(&buf->lock);
- buf->head = NULL;
- buf->tail = NULL;
+ tty_buffer_reset(&buf->sentinel, 0);
+ buf->head = &buf->sentinel;
+ buf->tail = &buf->sentinel;
init_llist_head(&buf->free);
buf->memory_used = 0;
INIT_WORK(&buf->work, flush_to_ldisc);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index a01fda7..5fe2f68 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -67,6 +67,7 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
struct tty_bufhead {
struct work_struct work;
spinlock_t lock;
+ struct tty_buffer sentinel;
struct tty_buffer *head; /* Queue head */
struct tty_buffer *tail; /* Active buffer */
struct llist_head free; /* Free queue head */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 08/16] tty: Track flip buffer memory limit atomically
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (6 preceding siblings ...)
2013-04-15 15:25 ` [PATCH 07/16] tty: Simplify flip buffer list with 0-sized sentinel Peter Hurley
@ 2013-04-15 15:25 ` Peter Hurley
2013-04-15 15:26 ` [PATCH 09/16] tty: Make driver-side flip buffers lockless Peter Hurley
` (8 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:25 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Lockless flip buffers require atomically updating the bytes-in-use
watermark.
The pty driver also peeks at the watermark value to limit
memory consumption to a much lower value than the default; query
the watermark with new fn, tty_buffer_space_avail().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/pty.c | 10 +++-------
drivers/tty/tty_buffer.c | 37 +++++++++++++++++++++++++++++++------
include/linux/tty.h | 3 +--
include/linux/tty_flip.h | 1 +
4 files changed, 36 insertions(+), 15 deletions(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 50bec0d..ca1472b 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -89,17 +89,13 @@ static void pty_unthrottle(struct tty_struct *tty)
* pty_space - report space left for writing
* @to: tty we are writing into
*
- * The tty buffers allow 64K but we sneak a peak and clip at 8K this
- * allows a lot of overspill room for echo and other fun messes to
- * be handled properly
+ * Limit the buffer space used by ptys to 8k.
*/
static int pty_space(struct tty_struct *to)
{
- int n = 8192 - to->port->buf.memory_used;
- if (n < 0)
- return 0;
- return n;
+ int n = tty_buffer_space_avail(to->port);
+ return min(n, 8192);
}
/**
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 231b7a8..5d5a564 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -22,6 +22,31 @@
#define MIN_TTYB_SIZE 256
#define TTYB_ALIGN_MASK 255
+/*
+ * Byte threshold to limit memory consumption for flip buffers.
+ * The actual memory limit is > 2x this amount.
+ */
+#define TTYB_MEM_LIMIT 65536
+
+
+/**
+ * tty_buffer_space_avail - return unused buffer space
+ * @port - tty_port owning the flip buffer
+ *
+ * Returns the # of bytes which can be written by the driver without
+ * reaching the buffer limit.
+ *
+ * Note: this does not guarantee that memory is available to write
+ * the returned # of bytes (use tty_prepare_flip_string_xxx() to
+ * pre-allocate if memory guarantee is required).
+ */
+
+int tty_buffer_space_avail(struct tty_port *port)
+{
+ int space = TTYB_MEM_LIMIT - atomic_read(&port->buf.memory_used);
+ return max(space, 0);
+}
+
static void tty_buffer_reset(struct tty_buffer *p, size_t size)
{
p->used = 0;
@@ -59,7 +84,8 @@ void tty_buffer_free_all(struct tty_port *port)
tty_buffer_reset(&buf->sentinel, 0);
buf->head = &buf->sentinel;
buf->tail = &buf->sentinel;
- buf->memory_used = 0;
+
+ atomic_set(&buf->memory_used, 0);
}
/**
@@ -92,7 +118,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
- if (port->buf.memory_used + size > 65536)
+ if (atomic_read(&port->buf.memory_used) > TTYB_MEM_LIMIT)
return NULL;
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if (p == NULL)
@@ -100,7 +126,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
found:
tty_buffer_reset(p, size);
- port->buf.memory_used += size;
+ atomic_add(size, &port->buf.memory_used);
return p;
}
@@ -118,8 +144,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
struct tty_bufhead *buf = &port->buf;
/* Dumb strategy for now - should keep some stats */
- buf->memory_used -= b->size;
- WARN_ON(buf->memory_used < 0);
+ WARN_ON(atomic_sub_return(b->size, &buf->memory_used) < 0);
if (b->size > MIN_TTYB_SIZE)
kfree(b);
@@ -525,7 +550,7 @@ void tty_buffer_init(struct tty_port *port)
buf->head = &buf->sentinel;
buf->tail = &buf->sentinel;
init_llist_head(&buf->free);
- buf->memory_used = 0;
+ atomic_set(&buf->memory_used, 0);
INIT_WORK(&buf->work, flush_to_ldisc);
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 5fe2f68..260ac7af0 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -71,8 +71,7 @@ struct tty_bufhead {
struct tty_buffer *head; /* Queue head */
struct tty_buffer *tail; /* Active buffer */
struct llist_head free; /* Free queue head */
- int memory_used; /* Buffer space used excluding
- free queue */
+ atomic_t memory_used; /* In-use buffers excluding free list */
};
/*
* When a break, frame error, or parity error happens, these codes are
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index ad03039..6944ed2 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -1,6 +1,7 @@
#ifndef _LINUX_TTY_FLIP_H
#define _LINUX_TTY_FLIP_H
+extern int tty_buffer_space_avail(struct tty_port *port);
extern int tty_buffer_request_room(struct tty_port *port, size_t size);
extern int tty_insert_flip_string_flags(struct tty_port *port,
const unsigned char *chars, const char *flags, size_t size);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 09/16] tty: Make driver-side flip buffers lockless
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (7 preceding siblings ...)
2013-04-15 15:25 ` [PATCH 08/16] tty: Track flip buffer memory limit atomically Peter Hurley
@ 2013-04-15 15:26 ` Peter Hurley
2013-04-15 15:26 ` [PATCH 10/16] tty: Ensure single-threaded flip buffer consumer with mutex Peter Hurley
` (7 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:26 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Driver-side flip buffer input is already single-threaded; 'publish'
the .next link as the last operation on the tail buffer so the
'consumer' sees the already-completed flip buffer.
The commit buffer index is already 'published' by driver-side functions.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 31 ++++---------------------------
1 file changed, 4 insertions(+), 27 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 5d5a564..685757c 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -62,8 +62,6 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size)
*
* Remove all the buffers pending on a tty whether queued with data
* or in the free ring. Must be called when the tty is no longer in use
- *
- * Locking: none
*/
void tty_buffer_free_all(struct tty_port *port)
@@ -216,29 +214,26 @@ void tty_buffer_flush(struct tty_struct *tty)
*
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
- *
- * Locking: Takes port->buf.lock
*/
int tty_buffer_request_room(struct tty_port *port, size_t size)
{
struct tty_bufhead *buf = &port->buf;
struct tty_buffer *b, *n;
int left;
- unsigned long flags;
- spin_lock_irqsave(&buf->lock, flags);
+
b = buf->tail;
left = b->size - b->used;
if (left < size) {
/* This is the slow path - looking for new buffers to use */
if ((n = tty_buffer_alloc(port, size)) != NULL) {
- b->next = n;
- b->commit = b->used;
buf->tail = n;
+ b->commit = b->used;
+ smp_mb();
+ b->next = n;
} else
size = left;
}
- spin_unlock_irqrestore(&buf->lock, flags);
return size;
}
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
@@ -252,8 +247,6 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room);
*
* Queue a series of bytes to the tty buffering. All the characters
* passed are marked with the supplied flag. Returns the number added.
- *
- * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_fixed_flag(struct tty_port *port,
@@ -288,8 +281,6 @@ EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag);
* Queue a series of bytes to the tty buffering. For each character
* the flags array indicates the status of the character. Returns the
* number added.
- *
- * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_flags(struct tty_port *port,
@@ -324,19 +315,14 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags);
* processing by the line discipline.
* Note that this function can only be used when the low_latency flag
* is unset. Otherwise the workqueue won't be flushed.
- *
- * Locking: Takes port->buf.lock
*/
void tty_schedule_flip(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- unsigned long flags;
WARN_ON(port->low_latency);
- spin_lock_irqsave(&buf->lock, flags);
buf->tail->commit = buf->tail->used;
- spin_unlock_irqrestore(&buf->lock, flags);
schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_schedule_flip);
@@ -352,8 +338,6 @@ EXPORT_SYMBOL(tty_schedule_flip);
* accounted for as ready for normal characters. This is used for drivers
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
- *
- * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars,
@@ -382,8 +366,6 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
* accounted for as ready for characters. This is used for drivers
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
- *
- * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string_flags(struct tty_port *port,
@@ -511,18 +493,13 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
*
* In the event of the queue being busy for flipping the work will be
* held off and retried later.
- *
- * Locking: tty buffer lock. Driver locks in low latency mode.
*/
void tty_flip_buffer_push(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- unsigned long flags;
- spin_lock_irqsave(&buf->lock, flags);
buf->tail->commit = buf->tail->used;
- spin_unlock_irqrestore(&buf->lock, flags);
if (port->low_latency)
flush_to_ldisc(&buf->work);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 10/16] tty: Ensure single-threaded flip buffer consumer with mutex
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (8 preceding siblings ...)
2013-04-15 15:26 ` [PATCH 09/16] tty: Make driver-side flip buffers lockless Peter Hurley
@ 2013-04-15 15:26 ` Peter Hurley
2013-04-15 15:26 ` [PATCH 11/16] tty: Only perform flip buffer flush from tty_buffer_flush() Peter Hurley
` (6 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:26 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
The buffer work may race with parallel tty_buffer_flush. Use a
mutex to guarantee exclusive modify access to the head flip
buffer.
Remove the unneeded spin lock.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/staging/dgrp/dgrp_tty.c | 2 ++
drivers/tty/tty_buffer.c | 40 +++++++++++++++++++---------------------
include/linux/tty.h | 2 +-
3 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/dgrp/dgrp_tty.c b/drivers/staging/dgrp/dgrp_tty.c
index 654f601..0d52de3 100644
--- a/drivers/staging/dgrp/dgrp_tty.c
+++ b/drivers/staging/dgrp/dgrp_tty.c
@@ -1120,7 +1120,9 @@ static void dgrp_tty_close(struct tty_struct *tty, struct file *file)
if (!sent_printer_offstr)
dgrp_tty_flush_buffer(tty);
+ spin_unlock_irqrestore(&nd->nd_lock, lock_flags);
tty_ldisc_flush(tty);
+ spin_lock_irqsave(&nd->nd_lock, lock_flags);
break;
}
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 685757c..c3c606c 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -157,8 +157,6 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
* flush all the buffers containing receive data. Caller must
* hold the buffer lock and must have ensured no parallel flush to
* ldisc is running.
- *
- * Locking: Caller must hold tty->buf.lock
*/
static void __tty_buffer_flush(struct tty_port *port)
@@ -182,29 +180,29 @@ static void __tty_buffer_flush(struct tty_port *port)
* being processed by flush_to_ldisc then we defer the processing
* to that function
*
- * Locking: none
+ * Locking: takes flush_mutex to ensure single-threaded flip buffer
+ * 'consumer'
*/
void tty_buffer_flush(struct tty_struct *tty)
{
struct tty_port *port = tty->port;
struct tty_bufhead *buf = &port->buf;
- unsigned long flags;
-
- spin_lock_irqsave(&buf->lock, flags);
+ mutex_lock(&buf->flush_mutex);
/* If the data is being pushed to the tty layer then we can't
process it here. Instead set a flag and the flush_to_ldisc
path will process the flush request before it exits */
if (test_bit(TTYP_FLUSHING, &port->iflags)) {
set_bit(TTYP_FLUSHPENDING, &port->iflags);
- spin_unlock_irqrestore(&buf->lock, flags);
+ mutex_unlock(&buf->flush_mutex);
wait_event(tty->read_wait,
test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
return;
- } else
- __tty_buffer_flush(port);
- spin_unlock_irqrestore(&buf->lock, flags);
+ }
+
+ __tty_buffer_flush(port);
+ mutex_unlock(&buf->flush_mutex);
}
/**
@@ -408,9 +406,10 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
* This routine is called out of the software interrupt to flush data
* from the buffer chain to the line discipline.
*
- * Locking: holds tty->buf.lock to guard buffer list. Drops the lock
- * while invoking the line discipline receive_buf method. The
- * receive_buf method is single threaded for each tty instance.
+ * The receive_buf method is single threaded for each tty instance.
+ *
+ * Locking: takes flush_mutex to ensure single-threaded flip buffer
+ * 'consumer'
*/
static void flush_to_ldisc(struct work_struct *work)
@@ -418,7 +417,6 @@ static void flush_to_ldisc(struct work_struct *work)
struct tty_port *port = container_of(work, struct tty_port, buf.work);
struct tty_bufhead *buf = &port->buf;
struct tty_struct *tty;
- unsigned long flags;
struct tty_ldisc *disc;
tty = port->itty;
@@ -429,7 +427,7 @@ static void flush_to_ldisc(struct work_struct *work)
if (disc == NULL)
return;
- spin_lock_irqsave(&buf->lock, flags);
+ mutex_lock(&buf->flush_mutex);
if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
while (1) {
@@ -444,11 +442,13 @@ static void flush_to_ldisc(struct work_struct *work)
tty_buffer_free(port, head);
continue;
}
- spin_unlock_irqrestore(&buf->lock, flags);
+
+ mutex_unlock(&buf->flush_mutex);
count = receive_buf(tty, head, count);
- spin_lock_irqsave(&buf->lock, flags);
+ mutex_lock(&buf->flush_mutex);
+
/* Ldisc or user is trying to flush the buffers.
We may have a deferred request to flush the
input buffer, if so pull the chain under the lock
@@ -464,7 +464,7 @@ static void flush_to_ldisc(struct work_struct *work)
clear_bit(TTYP_FLUSHING, &port->iflags);
}
- spin_unlock_irqrestore(&buf->lock, flags);
+ mutex_unlock(&buf->flush_mutex);
tty_ldisc_deref(disc);
}
@@ -514,15 +514,13 @@ EXPORT_SYMBOL(tty_flip_buffer_push);
*
* Set up the initial state of the buffer management for a tty device.
* Must be called before the other tty buffer functions are used.
- *
- * Locking: none
*/
void tty_buffer_init(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- spin_lock_init(&buf->lock);
+ mutex_init(&buf->flush_mutex);
tty_buffer_reset(&buf->sentinel, 0);
buf->head = &buf->sentinel;
buf->tail = &buf->sentinel;
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 260ac7af0..f068c4c 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -66,7 +66,7 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
struct tty_bufhead {
struct work_struct work;
- spinlock_t lock;
+ struct mutex flush_mutex;
struct tty_buffer sentinel;
struct tty_buffer *head; /* Queue head */
struct tty_buffer *tail; /* Active buffer */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 11/16] tty: Only perform flip buffer flush from tty_buffer_flush()
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (9 preceding siblings ...)
2013-04-15 15:26 ` [PATCH 10/16] tty: Ensure single-threaded flip buffer consumer with mutex Peter Hurley
@ 2013-04-15 15:26 ` Peter Hurley
2013-04-15 15:26 ` [PATCH 12/16] tty: Avoid false-sharing flip buffer ptrs Peter Hurley
` (5 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:26 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Now that dropping the buffer lock is not necessary (as result of
converting the spin lock to a mutex), the flip buffer flush no
longer needs to be handled by the buffer work.
Simply signal a flush is required; the buffer work will exit the
i/o loop, which allows tty_buffer_flush() to proceed.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 63 ++++++++++++++++--------------------------------
include/linux/tty.h | 1 -
2 files changed, 21 insertions(+), 43 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index c3c606c..39cae61 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -189,19 +189,11 @@ void tty_buffer_flush(struct tty_struct *tty)
struct tty_port *port = tty->port;
struct tty_bufhead *buf = &port->buf;
- mutex_lock(&buf->flush_mutex);
- /* If the data is being pushed to the tty layer then we can't
- process it here. Instead set a flag and the flush_to_ldisc
- path will process the flush request before it exits */
- if (test_bit(TTYP_FLUSHING, &port->iflags)) {
- set_bit(TTYP_FLUSHPENDING, &port->iflags);
- mutex_unlock(&buf->flush_mutex);
- wait_event(tty->read_wait,
- test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
- return;
- }
+ set_bit(TTYP_FLUSHPENDING, &port->iflags);
+ mutex_lock(&buf->flush_mutex);
__tty_buffer_flush(port);
+ clear_bit(TTYP_FLUSHPENDING, &port->iflags);
mutex_unlock(&buf->flush_mutex);
}
@@ -429,39 +421,26 @@ static void flush_to_ldisc(struct work_struct *work)
mutex_lock(&buf->flush_mutex);
- if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
- while (1) {
- struct tty_buffer *head = buf->head;
- int count;
-
- count = head->commit - head->read;
- if (!count) {
- if (head->next == NULL)
- break;
- buf->head = head->next;
- tty_buffer_free(port, head);
- continue;
- }
-
- mutex_unlock(&buf->flush_mutex);
-
- count = receive_buf(tty, head, count);
-
- mutex_lock(&buf->flush_mutex);
-
- /* Ldisc or user is trying to flush the buffers.
- We may have a deferred request to flush the
- input buffer, if so pull the chain under the lock
- and empty the queue */
- if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
- __tty_buffer_flush(port);
- clear_bit(TTYP_FLUSHPENDING, &port->iflags);
- wake_up(&tty->read_wait);
- break;
- } else if (!count)
+ while (1) {
+ struct tty_buffer *head = buf->head;
+ int count;
+
+ /* Ldisc or user is trying to flush the buffers. */
+ if (test_bit(TTYP_FLUSHPENDING, &port->iflags))
+ break;
+
+ count = head->commit - head->read;
+ if (!count) {
+ if (head->next == NULL)
break;
+ buf->head = head->next;
+ tty_buffer_free(port, head);
+ continue;
}
- clear_bit(TTYP_FLUSHING, &port->iflags);
+
+ count = receive_buf(tty, head, count);
+ if (!count)
+ break;
}
mutex_unlock(&buf->flush_mutex);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index f068c4c..094a909 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -213,7 +213,6 @@ struct tty_port {
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
unsigned long iflags; /* TTYP_ internal flags */
-#define TTYP_FLUSHING 1 /* Flushing to ldisc in progress */
#define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */
unsigned char console:1, /* port is a console */
low_latency:1; /* direct buffer flush */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 12/16] tty: Avoid false-sharing flip buffer ptrs
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (10 preceding siblings ...)
2013-04-15 15:26 ` [PATCH 11/16] tty: Only perform flip buffer flush from tty_buffer_flush() Peter Hurley
@ 2013-04-15 15:26 ` Peter Hurley
2013-04-15 15:26 ` [PATCH 13/16] tty: Use non-atomic state to signal flip buffer flush pending Peter Hurley
` (4 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:26 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Separate the head and tail ptrs to avoid cache-line contention
(so called 'false-sharing') between concurrent threads.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
include/linux/tty.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 094a909..08633e0 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -65,13 +65,13 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
struct tty_bufhead {
+ struct tty_buffer *head; /* Queue head */
struct work_struct work;
struct mutex flush_mutex;
struct tty_buffer sentinel;
- struct tty_buffer *head; /* Queue head */
- struct tty_buffer *tail; /* Active buffer */
struct llist_head free; /* Free queue head */
atomic_t memory_used; /* In-use buffers excluding free list */
+ struct tty_buffer *tail; /* Active buffer */
};
/*
* When a break, frame error, or parity error happens, these codes are
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 13/16] tty: Use non-atomic state to signal flip buffer flush pending
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (11 preceding siblings ...)
2013-04-15 15:26 ` [PATCH 12/16] tty: Avoid false-sharing flip buffer ptrs Peter Hurley
@ 2013-04-15 15:26 ` Peter Hurley
2013-04-15 15:26 ` [PATCH 14/16] tty: Merge __tty_flush_buffer() into lone call site Peter Hurley
` (3 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:26 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Atomic bit ops are no longer required to indicate a flip buffer
flush is pending, as the flush_mutex is sufficient barrier.
Remove the unnecessary port .iflags field and localize flip buffer
state to struct tty_bufhead.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 7 ++++---
include/linux/tty.h | 3 +--
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 39cae61..fb042b9 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -189,11 +189,11 @@ void tty_buffer_flush(struct tty_struct *tty)
struct tty_port *port = tty->port;
struct tty_bufhead *buf = &port->buf;
- set_bit(TTYP_FLUSHPENDING, &port->iflags);
+ buf->flushpending = 1;
mutex_lock(&buf->flush_mutex);
__tty_buffer_flush(port);
- clear_bit(TTYP_FLUSHPENDING, &port->iflags);
+ buf->flushpending = 0;
mutex_unlock(&buf->flush_mutex);
}
@@ -426,7 +426,7 @@ static void flush_to_ldisc(struct work_struct *work)
int count;
/* Ldisc or user is trying to flush the buffers. */
- if (test_bit(TTYP_FLUSHPENDING, &port->iflags))
+ if (buf->flushpending)
break;
count = head->commit - head->read;
@@ -505,6 +505,7 @@ void tty_buffer_init(struct tty_port *port)
buf->tail = &buf->sentinel;
init_llist_head(&buf->free);
atomic_set(&buf->memory_used, 0);
+ buf->flushpending = 0;
INIT_WORK(&buf->work, flush_to_ldisc);
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 08633e0..2b880c2 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -68,6 +68,7 @@ struct tty_bufhead {
struct tty_buffer *head; /* Queue head */
struct work_struct work;
struct mutex flush_mutex;
+ unsigned int flushpending:1;
struct tty_buffer sentinel;
struct llist_head free; /* Free queue head */
atomic_t memory_used; /* In-use buffers excluding free list */
@@ -212,8 +213,6 @@ struct tty_port {
wait_queue_head_t close_wait; /* Close waiters */
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
- unsigned long iflags; /* TTYP_ internal flags */
-#define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */
unsigned char console:1, /* port is a console */
low_latency:1; /* direct buffer flush */
struct mutex mutex; /* Locking */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 14/16] tty: Merge __tty_flush_buffer() into lone call site
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (12 preceding siblings ...)
2013-04-15 15:26 ` [PATCH 13/16] tty: Use non-atomic state to signal flip buffer flush pending Peter Hurley
@ 2013-04-15 15:26 ` Peter Hurley
2013-04-15 15:26 ` [PATCH 15/16] tty: Fix unsafe vt paste_selection() Peter Hurley
` (2 subsequent siblings)
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:26 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
__tty_flush_buffer() is now only called by tty_flush_buffer();
merge functions.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 29 ++++++-----------------------
1 file changed, 6 insertions(+), 23 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index fb042b9..dbe4a71 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -151,28 +151,6 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
}
/**
- * __tty_buffer_flush - flush full tty buffers
- * @tty: tty to flush
- *
- * flush all the buffers containing receive data. Caller must
- * hold the buffer lock and must have ensured no parallel flush to
- * ldisc is running.
- */
-
-static void __tty_buffer_flush(struct tty_port *port)
-{
- struct tty_bufhead *buf = &port->buf;
- struct tty_buffer *next;
-
- while ((next = buf->head->next) != NULL) {
- tty_buffer_free(port, buf->head);
- buf->head = next;
- }
- WARN_ON(buf->head != buf->tail);
- buf->head->read = buf->head->commit;
-}
-
-/**
* tty_buffer_flush - flush full tty buffers
* @tty: tty to flush
*
@@ -188,11 +166,16 @@ void tty_buffer_flush(struct tty_struct *tty)
{
struct tty_port *port = tty->port;
struct tty_bufhead *buf = &port->buf;
+ struct tty_buffer *next;
buf->flushpending = 1;
mutex_lock(&buf->flush_mutex);
- __tty_buffer_flush(port);
+ while ((next = buf->head->next) != NULL) {
+ tty_buffer_free(port, buf->head);
+ buf->head = next;
+ }
+ buf->head->read = buf->head->commit;
buf->flushpending = 0;
mutex_unlock(&buf->flush_mutex);
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 15/16] tty: Fix unsafe vt paste_selection()
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (13 preceding siblings ...)
2013-04-15 15:26 ` [PATCH 14/16] tty: Merge __tty_flush_buffer() into lone call site Peter Hurley
@ 2013-04-15 15:26 ` Peter Hurley
2013-04-15 15:26 ` [PATCH 16/16] tty: Remove private constant from global namespace Peter Hurley
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:26 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Convert the tty_buffer_flush() exclusion mechanism to a
public interface - tty_buffer_lock/unlock_exclusive() - and use
the interface to safely write the paste selection to the line
discipline.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 61 ++++++++++++++++++++++++++++++++++++----------
drivers/tty/vt/selection.c | 4 ++-
include/linux/tty.h | 4 +--
include/linux/tty_flip.h | 3 +++
4 files changed, 56 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index dbe4a71..f22e116 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -30,6 +30,42 @@
/**
+ * tty_buffer_lock_exclusive - gain exclusive access to buffer
+ * tty_buffer_unlock_exclusive - release exclusive access
+ *
+ * @port - tty_port owning the flip buffer
+ *
+ * Guarantees safe use of the line discipline's receive_buf() method by
+ * excluding the buffer work and any pending flush from using the flip
+ * buffer. Data can continue to be added concurrently to the flip buffer
+ * from the driver side.
+ *
+ * On release, the buffer work is restarted if there is data in the
+ * flip buffer
+ */
+
+void tty_buffer_lock_exclusive(struct tty_port *port)
+{
+ struct tty_bufhead *buf = &port->buf;
+
+ atomic_inc(&buf->priority);
+ mutex_lock(&buf->lock);
+}
+
+void tty_buffer_unlock_exclusive(struct tty_port *port)
+{
+ struct tty_bufhead *buf = &port->buf;
+ int restart;
+
+ restart = buf->head->commit != buf->head->read;
+
+ atomic_dec(&buf->priority);
+ mutex_unlock(&buf->lock);
+ if (restart)
+ queue_work(system_unbound_wq, &buf->work);
+}
+
+/**
* tty_buffer_space_avail - return unused buffer space
* @port - tty_port owning the flip buffer
*
@@ -158,7 +194,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
* being processed by flush_to_ldisc then we defer the processing
* to that function
*
- * Locking: takes flush_mutex to ensure single-threaded flip buffer
+ * Locking: takes buffer lock to ensure single-threaded flip buffer
* 'consumer'
*/
@@ -168,16 +204,16 @@ void tty_buffer_flush(struct tty_struct *tty)
struct tty_bufhead *buf = &port->buf;
struct tty_buffer *next;
- buf->flushpending = 1;
+ atomic_inc(&buf->priority);
- mutex_lock(&buf->flush_mutex);
+ mutex_lock(&buf->lock);
while ((next = buf->head->next) != NULL) {
tty_buffer_free(port, buf->head);
buf->head = next;
}
buf->head->read = buf->head->commit;
- buf->flushpending = 0;
- mutex_unlock(&buf->flush_mutex);
+ atomic_dec(&buf->priority);
+ mutex_unlock(&buf->lock);
}
/**
@@ -383,7 +419,7 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
*
* The receive_buf method is single threaded for each tty instance.
*
- * Locking: takes flush_mutex to ensure single-threaded flip buffer
+ * Locking: takes buffer lock to ensure single-threaded flip buffer
* 'consumer'
*/
@@ -402,14 +438,14 @@ static void flush_to_ldisc(struct work_struct *work)
if (disc == NULL)
return;
- mutex_lock(&buf->flush_mutex);
+ mutex_lock(&buf->lock);
while (1) {
struct tty_buffer *head = buf->head;
int count;
- /* Ldisc or user is trying to flush the buffers. */
- if (buf->flushpending)
+ /* Ldisc or user is trying to gain exclusive access */
+ if (atomic_read(&buf->priority))
break;
count = head->commit - head->read;
@@ -426,7 +462,7 @@ static void flush_to_ldisc(struct work_struct *work)
break;
}
- mutex_unlock(&buf->flush_mutex);
+ mutex_unlock(&buf->lock);
tty_ldisc_deref(disc);
}
@@ -482,13 +518,12 @@ void tty_buffer_init(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- mutex_init(&buf->flush_mutex);
+ mutex_init(&buf->lock);
tty_buffer_reset(&buf->sentinel, 0);
buf->head = &buf->sentinel;
buf->tail = &buf->sentinel;
init_llist_head(&buf->free);
atomic_set(&buf->memory_used, 0);
- buf->flushpending = 0;
+ atomic_set(&buf->priority, 0);
INIT_WORK(&buf->work, flush_to_ldisc);
}
-
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 2ca8d6b..ea27804 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -24,6 +24,7 @@
#include <linux/selection.h>
#include <linux/tiocl.h>
#include <linux/console.h>
+#include <linux/tty_flip.h>
/* Don't take this from <ctype.h>: 011-015 on the screen aren't spaces */
#define isspace(c) ((c) == ' ')
@@ -346,8 +347,8 @@ int paste_selection(struct tty_struct *tty)
console_unlock();
ld = tty_ldisc_ref_wait(tty);
+ tty_buffer_lock_exclusive(&vc->port);
- /* FIXME: this is completely unsafe */
add_wait_queue(&vc->paste_wait, &wait);
while (sel_buffer && sel_buffer_lth > pasted) {
set_current_state(TASK_INTERRUPTIBLE);
@@ -363,6 +364,7 @@ int paste_selection(struct tty_struct *tty)
remove_wait_queue(&vc->paste_wait, &wait);
__set_current_state(TASK_RUNNING);
+ tty_buffer_unlock_exclusive(&vc->port);
tty_ldisc_deref(ld);
return 0;
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 2b880c2..0959a7b 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -67,8 +67,8 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
struct tty_bufhead {
struct tty_buffer *head; /* Queue head */
struct work_struct work;
- struct mutex flush_mutex;
- unsigned int flushpending:1;
+ struct mutex lock;
+ atomic_t priority;
struct tty_buffer sentinel;
struct llist_head free; /* Free queue head */
atomic_t memory_used; /* In-use buffers excluding free list */
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index 6944ed2..21ddd7d 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -32,4 +32,7 @@ static inline int tty_insert_flip_string(struct tty_port *port,
return tty_insert_flip_string_fixed_flag(port, chars, TTY_NORMAL, size);
}
+extern void tty_buffer_lock_exclusive(struct tty_port *port);
+extern void tty_buffer_unlock_exclusive(struct tty_port *port);
+
#endif /* _LINUX_TTY_FLIP_H */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 16/16] tty: Remove private constant from global namespace
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (14 preceding siblings ...)
2013-04-15 15:26 ` [PATCH 15/16] tty: Fix unsafe vt paste_selection() Peter Hurley
@ 2013-04-15 15:26 ` Peter Hurley
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
16 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:26 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
TTY_BUFFER_PAGE is only used within drivers/tty/tty_buffer.c;
relocate to that file scope.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 10 ++++++++++
include/linux/tty.h | 11 -----------
2 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index f22e116..c043136f 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -28,6 +28,16 @@
*/
#define TTYB_MEM_LIMIT 65536
+/*
+ * We default to dicing tty buffer allocations to this many characters
+ * in order to avoid multiple page allocations. We know the size of
+ * tty_buffer itself but it must also be taken into account that the
+ * the buffer is 256 byte aligned. See tty_buffer_find for the allocation
+ * logic this must match
+ */
+
+#define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
+
/**
* tty_buffer_lock_exclusive - gain exclusive access to buffer
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 0959a7b..747c9e2 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -53,17 +53,6 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
return (char *)char_buf_ptr(b, ofs) + b->size;
}
-/*
- * We default to dicing tty buffer allocations to this many characters
- * in order to avoid multiple page allocations. We know the size of
- * tty_buffer itself but it must also be taken into account that the
- * the buffer is 256 byte aligned. See tty_buffer_find for the allocation
- * logic this must match
- */
-
-#define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
-
-
struct tty_bufhead {
struct tty_buffer *head; /* Queue head */
struct work_struct work;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 0/9] mostly lockless tty echo
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
` (15 preceding siblings ...)
2013-04-15 15:26 ` [PATCH 16/16] tty: Remove private constant from global namespace Peter Hurley
@ 2013-04-15 15:29 ` Peter Hurley
2013-04-15 15:29 ` [PATCH 1/9] n_tty: Remove unused echo_overrun field Peter Hurley
` (9 more replies)
16 siblings, 10 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
This 3rd of 4 patchsets implements a mostly-lockless tty echo output.
Because echoing is performed solely by the single-threaded ldisc
receive_buf() method, most of the lockless requirements are already
in-place. The main existing complications were;
1) Echoing could overrun itself. A fixed-size buffer is used to record
the operations necessary when outputting the echoes; the most recent
echo data is preserved.
2) An attempt to push unprocessed echoes is made by the n_tty_write method
(on a different thread) before attempting write output.
The overrun condition is solved by outputting the echoes in blocks and
ensuring that at least that much space is available each time an echo
operation is committed. At the conclusion of each flip buffer received,
any remaining unprocessed echoes are output.
This block output method is particularly effective when there is no reader
(the tty is output-only) and termios is misconfigured with echo enabled.
The concurrent access by the n_tty_write() method is already excluded
by the existing output_lock mutex.
Peter Hurley (9):
n_tty: Remove unused echo_overrun field
n_tty: Use separate head and tail indices for echo_buf
n_tty: Replace echo_cnt with computed value
n_tty: Remove echo_lock
n_tty: Eliminate echo_commit memory barrier
n_tty: Process echoes in blocks
n_tty: Only flush echo output if actually output
n_tty: Eliminate counter in __process_echoes
n_tty: Avoid false-sharing echo buffer indices
drivers/tty/n_tty.c | 248 ++++++++++++++++++++++++----------------------------
1 file changed, 113 insertions(+), 135 deletions(-)
--
1.8.1.2
^ permalink raw reply [flat|nested] 238+ messages in thread* [PATCH 1/9] n_tty: Remove unused echo_overrun field
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
@ 2013-04-15 15:29 ` Peter Hurley
2013-04-15 15:29 ` [PATCH 2/9] n_tty: Use separate head and tail indices for echo_buf Peter Hurley
` (8 subsequent siblings)
9 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
The echo_overrun field is only assigned and never tested; remove it.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 4dbb558..e9a392a 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -96,7 +96,6 @@ struct n_tty_data {
/* must hold exclusive termios_rwsem to reset these */
unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
- unsigned char echo_overrun:1;
/* shared by producer and consumer */
char *read_buf;
@@ -325,7 +324,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
mutex_lock(&ldata->echo_lock);
- ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
+ ldata->echo_pos = ldata->echo_cnt = 0;
mutex_unlock(&ldata->echo_lock);
ldata->erasing = 0;
@@ -782,14 +781,11 @@ static void process_echoes(struct tty_struct *tty)
if (nr == 0) {
ldata->echo_pos = 0;
ldata->echo_cnt = 0;
- ldata->echo_overrun = 0;
} else {
int num_processed = ldata->echo_cnt - nr;
ldata->echo_pos += num_processed;
ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
ldata->echo_cnt = nr;
- if (num_processed > 0)
- ldata->echo_overrun = 0;
}
mutex_unlock(&ldata->echo_lock);
@@ -835,8 +831,6 @@ static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
ldata->echo_pos++;
}
ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
-
- ldata->echo_overrun = 1;
} else {
new_byte_pos = ldata->echo_pos + ldata->echo_cnt;
new_byte_pos &= N_TTY_BUF_SIZE - 1;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 2/9] n_tty: Use separate head and tail indices for echo_buf
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
2013-04-15 15:29 ` [PATCH 1/9] n_tty: Remove unused echo_overrun field Peter Hurley
@ 2013-04-15 15:29 ` Peter Hurley
2013-04-15 15:29 ` [PATCH 3/9] n_tty: Replace echo_cnt with computed value Peter Hurley
` (7 subsequent siblings)
9 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Instead of using a single index to track the current echo_buf position,
use a head index when adding to the buffer and a tail index when
consuming from the buffer. Allow these head and tail indices to wrap
at max representable value; perform modulo reduction via helper
functions when accessing the buffer.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 88 +++++++++++++++++++++--------------------------------
1 file changed, 35 insertions(+), 53 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index e9a392a..85334f8 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -108,7 +108,8 @@ struct n_tty_data {
/* protected by echo_lock */
unsigned char *echo_buf;
- unsigned int echo_pos;
+ size_t echo_head;
+ size_t echo_tail;
unsigned int echo_cnt;
/* protected by output lock */
@@ -135,6 +136,16 @@ static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i)
return &ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)];
}
+static inline unsigned char echo_buf(struct n_tty_data *ldata, size_t i)
+{
+ return ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)];
+}
+
+static inline unsigned char *echo_buf_addr(struct n_tty_data *ldata, size_t i)
+{
+ return &ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)];
+}
+
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
@@ -324,7 +335,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
mutex_lock(&ldata->echo_lock);
- ldata->echo_pos = ldata->echo_cnt = 0;
+ ldata->echo_head = ldata->echo_tail = ldata->echo_cnt = 0;
mutex_unlock(&ldata->echo_lock);
ldata->erasing = 0;
@@ -639,8 +650,8 @@ static void process_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
int space, nr;
+ size_t tail;
unsigned char c;
- unsigned char *cp, *buf_end;
if (!ldata->echo_cnt)
return;
@@ -650,14 +661,12 @@ static void process_echoes(struct tty_struct *tty)
space = tty_write_room(tty);
- buf_end = ldata->echo_buf + N_TTY_BUF_SIZE;
- cp = ldata->echo_buf + ldata->echo_pos;
+ tail = ldata->echo_tail;
nr = ldata->echo_cnt;
while (nr > 0) {
- c = *cp;
+ c = echo_buf(ldata, tail);
if (c == ECHO_OP_START) {
unsigned char op;
- unsigned char *opp;
int no_space_left = 0;
/*
@@ -665,18 +674,13 @@ static void process_echoes(struct tty_struct *tty)
* operation, get the next byte, which is either the
* op code or a control character value.
*/
- opp = cp + 1;
- if (opp == buf_end)
- opp -= N_TTY_BUF_SIZE;
- op = *opp;
+ op = echo_buf(ldata, tail + 1);
switch (op) {
unsigned int num_chars, num_bs;
case ECHO_OP_ERASE_TAB:
- if (++opp == buf_end)
- opp -= N_TTY_BUF_SIZE;
- num_chars = *opp;
+ num_chars = echo_buf(ldata, tail + 2);
/*
* Determine how many columns to go back
@@ -702,20 +706,20 @@ static void process_echoes(struct tty_struct *tty)
if (ldata->column > 0)
ldata->column--;
}
- cp += 3;
+ tail += 3;
nr -= 3;
break;
case ECHO_OP_SET_CANON_COL:
ldata->canon_column = ldata->column;
- cp += 2;
+ tail += 2;
nr -= 2;
break;
case ECHO_OP_MOVE_BACK_COL:
if (ldata->column > 0)
ldata->column--;
- cp += 2;
+ tail += 2;
nr -= 2;
break;
@@ -728,7 +732,7 @@ static void process_echoes(struct tty_struct *tty)
tty_put_char(tty, ECHO_OP_START);
ldata->column++;
space--;
- cp += 2;
+ tail += 2;
nr -= 2;
break;
@@ -750,7 +754,7 @@ static void process_echoes(struct tty_struct *tty)
tty_put_char(tty, op ^ 0100);
ldata->column += 2;
space -= 2;
- cp += 2;
+ tail += 2;
nr -= 2;
}
@@ -769,24 +773,13 @@ static void process_echoes(struct tty_struct *tty)
tty_put_char(tty, c);
space -= 1;
}
- cp += 1;
+ tail += 1;
nr -= 1;
}
-
- /* When end of circular buffer reached, wrap around */
- if (cp >= buf_end)
- cp -= N_TTY_BUF_SIZE;
}
- if (nr == 0) {
- ldata->echo_pos = 0;
- ldata->echo_cnt = 0;
- } else {
- int num_processed = ldata->echo_cnt - nr;
- ldata->echo_pos += num_processed;
- ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
- ldata->echo_cnt = nr;
- }
+ ldata->echo_tail = tail;
+ ldata->echo_cnt = nr;
mutex_unlock(&ldata->echo_lock);
mutex_unlock(&ldata->output_lock);
@@ -807,37 +800,26 @@ static void process_echoes(struct tty_struct *tty)
static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
- int new_byte_pos;
-
if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
- /* Circular buffer is already at capacity */
- new_byte_pos = ldata->echo_pos;
-
+ size_t head = ldata->echo_head;
/*
* Since the buffer start position needs to be advanced,
* be sure to step by a whole operation byte group.
*/
- if (ldata->echo_buf[ldata->echo_pos] == ECHO_OP_START) {
- if (ldata->echo_buf[(ldata->echo_pos + 1) &
- (N_TTY_BUF_SIZE - 1)] ==
- ECHO_OP_ERASE_TAB) {
- ldata->echo_pos += 3;
+ if (echo_buf(ldata, head) == ECHO_OP_START) {
+ if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB) {
+ ldata->echo_tail += 3;
ldata->echo_cnt -= 2;
} else {
- ldata->echo_pos += 2;
+ ldata->echo_tail += 2;
ldata->echo_cnt -= 1;
}
- } else {
- ldata->echo_pos++;
- }
- ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
- } else {
- new_byte_pos = ldata->echo_pos + ldata->echo_cnt;
- new_byte_pos &= N_TTY_BUF_SIZE - 1;
+ } else
+ ldata->echo_tail++;
+ } else
ldata->echo_cnt++;
- }
- ldata->echo_buf[new_byte_pos] = c;
+ *echo_buf_addr(ldata, ldata->echo_head++) = c;
}
/**
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 3/9] n_tty: Replace echo_cnt with computed value
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
2013-04-15 15:29 ` [PATCH 1/9] n_tty: Remove unused echo_overrun field Peter Hurley
2013-04-15 15:29 ` [PATCH 2/9] n_tty: Use separate head and tail indices for echo_buf Peter Hurley
@ 2013-04-15 15:29 ` Peter Hurley
2013-04-15 15:29 ` [PATCH 4/9] n_tty: Remove echo_lock Peter Hurley
` (6 subsequent siblings)
9 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Prepare for lockless echo_buf handling; compute current byte count
of echo_buf from head and tail indices.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 20 +++++++-------------
1 file changed, 7 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 85334f8..cd41733 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -110,7 +110,6 @@ struct n_tty_data {
unsigned char *echo_buf;
size_t echo_head;
size_t echo_tail;
- unsigned int echo_cnt;
/* protected by output lock */
unsigned int column;
@@ -335,7 +334,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
mutex_lock(&ldata->echo_lock);
- ldata->echo_head = ldata->echo_tail = ldata->echo_cnt = 0;
+ ldata->echo_head = ldata->echo_tail = 0;
mutex_unlock(&ldata->echo_lock);
ldata->erasing = 0;
@@ -653,7 +652,7 @@ static void process_echoes(struct tty_struct *tty)
size_t tail;
unsigned char c;
- if (!ldata->echo_cnt)
+ if (ldata->echo_head == ldata->echo_tail)
return;
mutex_lock(&ldata->output_lock);
@@ -662,7 +661,7 @@ static void process_echoes(struct tty_struct *tty)
space = tty_write_room(tty);
tail = ldata->echo_tail;
- nr = ldata->echo_cnt;
+ nr = ldata->echo_head - ldata->echo_tail;
while (nr > 0) {
c = echo_buf(ldata, tail);
if (c == ECHO_OP_START) {
@@ -779,7 +778,6 @@ static void process_echoes(struct tty_struct *tty)
}
ldata->echo_tail = tail;
- ldata->echo_cnt = nr;
mutex_unlock(&ldata->echo_lock);
mutex_unlock(&ldata->output_lock);
@@ -800,24 +798,20 @@ static void process_echoes(struct tty_struct *tty)
static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
- if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
+ if (ldata->echo_head - ldata->echo_tail == N_TTY_BUF_SIZE) {
size_t head = ldata->echo_head;
/*
* Since the buffer start position needs to be advanced,
* be sure to step by a whole operation byte group.
*/
if (echo_buf(ldata, head) == ECHO_OP_START) {
- if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB) {
+ if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB)
ldata->echo_tail += 3;
- ldata->echo_cnt -= 2;
- } else {
+ else
ldata->echo_tail += 2;
- ldata->echo_cnt -= 1;
- }
} else
ldata->echo_tail++;
- } else
- ldata->echo_cnt++;
+ }
*echo_buf_addr(ldata, ldata->echo_head++) = c;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 4/9] n_tty: Remove echo_lock
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
` (2 preceding siblings ...)
2013-04-15 15:29 ` [PATCH 3/9] n_tty: Replace echo_cnt with computed value Peter Hurley
@ 2013-04-15 15:29 ` Peter Hurley
2013-04-15 15:29 ` [PATCH 5/9] n_tty: Eliminate echo_commit memory barrier Peter Hurley
` (5 subsequent siblings)
9 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Adding data to echo_buf (via add_echo_byte()) is guaranteed to be
single-threaded, since all callers are from the n_tty_receive_buf()
path. Processing the echo_buf can be called from either the
n_tty_receive_buf() path or the n_tty_write() path; however, these
callers are already serialized by output_lock.
Publish cumulative echo_head changes to echo_commit; process echo_buf
from echo_tail to echo_commit; remove echo_lock.
On echo_buf overrun, claim output_lock to serialize changes to
echo_tail.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 75 ++++++++++++++++++++---------------------------------
1 file changed, 28 insertions(+), 47 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index cd41733..49ef008 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -106,10 +106,10 @@ struct n_tty_data {
/* consumer-published */
size_t read_tail;
- /* protected by echo_lock */
unsigned char *echo_buf;
size_t echo_head;
size_t echo_tail;
+ size_t echo_commit;
/* protected by output lock */
unsigned int column;
@@ -117,7 +117,6 @@ struct n_tty_data {
struct mutex atomic_read_lock;
struct mutex output_lock;
- struct mutex echo_lock;
};
static inline size_t read_cnt(struct n_tty_data *ldata)
@@ -332,10 +331,7 @@ static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
static void reset_buffer_flags(struct n_tty_data *ldata)
{
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
-
- mutex_lock(&ldata->echo_lock);
- ldata->echo_head = ldata->echo_tail = 0;
- mutex_unlock(&ldata->echo_lock);
+ ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0;
ldata->erasing = 0;
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
@@ -641,8 +637,7 @@ break_out:
* are prioritized. Also, when control characters are echoed with a
* prefixed "^", the pair is treated atomically and thus not separated.
*
- * Locking: output_lock to protect column state and space left,
- * echo_lock to protect the echo buffer
+ * Locking: output_lock to protect column state and space left
*/
static void process_echoes(struct tty_struct *tty)
@@ -652,16 +647,15 @@ static void process_echoes(struct tty_struct *tty)
size_t tail;
unsigned char c;
- if (ldata->echo_head == ldata->echo_tail)
+ if (ldata->echo_commit == ldata->echo_tail)
return;
mutex_lock(&ldata->output_lock);
- mutex_lock(&ldata->echo_lock);
space = tty_write_room(tty);
tail = ldata->echo_tail;
- nr = ldata->echo_head - ldata->echo_tail;
+ nr = ldata->echo_commit - ldata->echo_tail;
while (nr > 0) {
c = echo_buf(ldata, tail);
if (c == ECHO_OP_START) {
@@ -779,13 +773,21 @@ static void process_echoes(struct tty_struct *tty)
ldata->echo_tail = tail;
- mutex_unlock(&ldata->echo_lock);
mutex_unlock(&ldata->output_lock);
if (tty->ops->flush_chars)
tty->ops->flush_chars(tty);
}
+static void commit_echoes(struct tty_struct *tty)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+
+ smp_mb();
+ ldata->echo_commit = ldata->echo_head;
+ process_echoes(tty);
+}
+
/**
* add_echo_byte - add a byte to the echo buffer
* @c: unicode byte to echo
@@ -793,13 +795,16 @@ static void process_echoes(struct tty_struct *tty)
*
* Add a character or operation byte to the echo buffer.
*
- * Should be called under the echo lock to protect the echo buffer.
+ * Locks: may claim output_lock to prevent concurrent modify of
+ * echo_tail by process_echoes().
*/
static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
if (ldata->echo_head - ldata->echo_tail == N_TTY_BUF_SIZE) {
size_t head = ldata->echo_head;
+
+ mutex_lock(&ldata->output_lock);
/*
* Since the buffer start position needs to be advanced,
* be sure to step by a whole operation byte group.
@@ -811,6 +816,7 @@ static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
ldata->echo_tail += 2;
} else
ldata->echo_tail++;
+ mutex_unlock(&ldata->output_lock);
}
*echo_buf_addr(ldata, ldata->echo_head++) = c;
@@ -821,16 +827,12 @@ static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
* @ldata: n_tty data
*
* Add an operation to the echo buffer to move back one column.
- *
- * Locking: echo_lock to protect the echo buffer
*/
static void echo_move_back_col(struct n_tty_data *ldata)
{
- mutex_lock(&ldata->echo_lock);
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata);
- mutex_unlock(&ldata->echo_lock);
}
/**
@@ -839,16 +841,12 @@ static void echo_move_back_col(struct n_tty_data *ldata)
*
* Add an operation to the echo buffer to set the canon column
* to the current column.
- *
- * Locking: echo_lock to protect the echo buffer
*/
static void echo_set_canon_col(struct n_tty_data *ldata)
{
- mutex_lock(&ldata->echo_lock);
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(ECHO_OP_SET_CANON_COL, ldata);
- mutex_unlock(&ldata->echo_lock);
}
/**
@@ -864,15 +862,11 @@ static void echo_set_canon_col(struct n_tty_data *ldata)
* of input. This information will be used later, along with
* canon column (if applicable), to go back the correct number
* of columns.
- *
- * Locking: echo_lock to protect the echo buffer
*/
static void echo_erase_tab(unsigned int num_chars, int after_tab,
struct n_tty_data *ldata)
{
- mutex_lock(&ldata->echo_lock);
-
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(ECHO_OP_ERASE_TAB, ldata);
@@ -884,8 +878,6 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
num_chars |= 0x80;
add_echo_byte(num_chars, ldata);
-
- mutex_unlock(&ldata->echo_lock);
}
/**
@@ -897,20 +889,16 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
* L_ECHO(tty) is true. Called from the driver receive_buf path.
*
* This variant does not treat control characters specially.
- *
- * Locking: echo_lock to protect the echo buffer
*/
static void echo_char_raw(unsigned char c, struct n_tty_data *ldata)
{
- mutex_lock(&ldata->echo_lock);
if (c == ECHO_OP_START) {
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(ECHO_OP_START, ldata);
} else {
add_echo_byte(c, ldata);
}
- mutex_unlock(&ldata->echo_lock);
}
/**
@@ -923,16 +911,12 @@ static void echo_char_raw(unsigned char c, struct n_tty_data *ldata)
*
* This variant tags control characters to be echoed as "^X"
* (where X is the letter representing the control char).
- *
- * Locking: echo_lock to protect the echo buffer
*/
static void echo_char(unsigned char c, struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
- mutex_lock(&ldata->echo_lock);
-
if (c == ECHO_OP_START) {
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(ECHO_OP_START, ldata);
@@ -941,8 +925,6 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(c, ldata);
}
-
- mutex_unlock(&ldata->echo_lock);
}
/**
@@ -1284,7 +1266,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (ldata->canon_head == ldata->read_head)
echo_set_canon_col(ldata);
echo_char(c, tty);
- process_echoes(tty);
+ commit_echoes(tty);
}
if (parmrk)
put_tty_queue(c, ldata);
@@ -1295,7 +1277,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (I_IXON(tty)) {
if (c == START_CHAR(tty)) {
start_tty(tty);
- process_echoes(tty);
+ commit_echoes(tty);
return;
}
if (c == STOP_CHAR(tty)) {
@@ -1326,7 +1308,7 @@ send_signal:
start_tty(tty);
if (L_ECHO(tty)) {
echo_char(c, tty);
- process_echoes(tty);
+ commit_echoes(tty);
}
isig(signal, tty);
return;
@@ -1345,7 +1327,7 @@ send_signal:
if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) ||
(c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
eraser(c, tty);
- process_echoes(tty);
+ commit_echoes(tty);
return;
}
if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
@@ -1355,7 +1337,7 @@ send_signal:
if (L_ECHOCTL(tty)) {
echo_char_raw('^', ldata);
echo_char_raw('\b', ldata);
- process_echoes(tty);
+ commit_echoes(tty);
}
}
return;
@@ -1371,7 +1353,7 @@ send_signal:
echo_char(read_buf(ldata, tail), tty);
tail++;
}
- process_echoes(tty);
+ commit_echoes(tty);
return;
}
if (c == '\n') {
@@ -1382,7 +1364,7 @@ send_signal:
}
if (L_ECHO(tty) || L_ECHONL(tty)) {
echo_char_raw('\n', ldata);
- process_echoes(tty);
+ commit_echoes(tty);
}
goto handle_newline;
}
@@ -1411,7 +1393,7 @@ send_signal:
if (ldata->canon_head == ldata->read_head)
echo_set_canon_col(ldata);
echo_char(c, tty);
- process_echoes(tty);
+ commit_echoes(tty);
}
/*
* XXX does PARMRK doubling happen for
@@ -1448,7 +1430,7 @@ handle_newline:
echo_set_canon_col(ldata);
echo_char(c, tty);
}
- process_echoes(tty);
+ commit_echoes(tty);
}
if (parmrk)
@@ -1710,7 +1692,6 @@ static int n_tty_open(struct tty_struct *tty)
ldata->overrun_time = jiffies;
mutex_init(&ldata->atomic_read_lock);
mutex_init(&ldata->output_lock);
- mutex_init(&ldata->echo_lock);
/* These are ugly. Currently a malloc failure here can panic */
ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 5/9] n_tty: Eliminate echo_commit memory barrier
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
` (3 preceding siblings ...)
2013-04-15 15:29 ` [PATCH 4/9] n_tty: Remove echo_lock Peter Hurley
@ 2013-04-15 15:29 ` Peter Hurley
2013-04-15 15:29 ` [PATCH 6/9] n_tty: Process echoes in blocks Peter Hurley
` (4 subsequent siblings)
9 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Use output_lock mutex as a memory barrier when storing echo_commit.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 31 ++++++++++++++++++++-----------
1 file changed, 20 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 49ef008..c101492 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -637,21 +637,16 @@ break_out:
* are prioritized. Also, when control characters are echoed with a
* prefixed "^", the pair is treated atomically and thus not separated.
*
- * Locking: output_lock to protect column state and space left
+ * Locking: callers must hold output_lock
*/
-static void process_echoes(struct tty_struct *tty)
+static void __process_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
int space, nr;
size_t tail;
unsigned char c;
- if (ldata->echo_commit == ldata->echo_tail)
- return;
-
- mutex_lock(&ldata->output_lock);
-
space = tty_write_room(tty);
tail = ldata->echo_tail;
@@ -772,20 +767,34 @@ static void process_echoes(struct tty_struct *tty)
}
ldata->echo_tail = tail;
+}
+
+static void commit_echoes(struct tty_struct *tty)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ mutex_lock(&ldata->output_lock);
+ ldata->echo_commit = ldata->echo_head;
+ __process_echoes(tty);
mutex_unlock(&ldata->output_lock);
if (tty->ops->flush_chars)
tty->ops->flush_chars(tty);
}
-static void commit_echoes(struct tty_struct *tty)
+static void process_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
- smp_mb();
- ldata->echo_commit = ldata->echo_head;
- process_echoes(tty);
+ if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_tail)
+ return;
+
+ mutex_lock(&ldata->output_lock);
+ __process_echoes(tty);
+ mutex_unlock(&ldata->output_lock);
+
+ if (tty->ops->flush_chars)
+ tty->ops->flush_chars(tty);
}
/**
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 6/9] n_tty: Process echoes in blocks
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
` (4 preceding siblings ...)
2013-04-15 15:29 ` [PATCH 5/9] n_tty: Eliminate echo_commit memory barrier Peter Hurley
@ 2013-04-15 15:29 ` Peter Hurley
2013-04-15 15:29 ` [PATCH 7/9] n_tty: Only flush echo output if actually output Peter Hurley
` (3 subsequent siblings)
9 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Byte-by-byte echo output is painfully slow, requiring a lock/unlock
cycle for every input byte.
Instead, perform the echo output in blocks of 256 characters, and
at least once per flip buffer receive. Enough space is reserved in
the echo buffer to guarantee a full block can be saved without
overrunning the echo output. Overrun is prevented by discarding
the oldest echoes until enough space exists in the echo buffer
to receive at least a full block of new echoes.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 70 +++++++++++++++++++++++++++++++++++------------------
1 file changed, 47 insertions(+), 23 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index c101492..6f507f5 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -74,6 +74,11 @@
#define ECHO_OP_SET_CANON_COL 0x81
#define ECHO_OP_ERASE_TAB 0x82
+#define ECHO_COMMIT_WATERMARK 256
+#define ECHO_BLOCK 256
+#define ECHO_DISCARD_WATERMARK N_TTY_BUF_SIZE - (ECHO_BLOCK + 32)
+
+
#undef N_TTY_TRACE
#ifdef N_TTY_TRACE
# define n_tty_trace(f, args...) trace_printk(f, ##args)
@@ -766,15 +771,40 @@ static void __process_echoes(struct tty_struct *tty)
}
}
+ /* If the echo buffer is nearly full (so that the possibility exists
+ * of echo overrun before the next commit), then discard enough
+ * data at the tail to prevent a subsequent overrun */
+ while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) {
+ if (echo_buf(ldata, tail == ECHO_OP_START)) {
+ if (echo_buf(ldata, tail) == ECHO_OP_ERASE_TAB)
+ tail += 3;
+ else
+ tail += 2;
+ } else
+ tail++;
+ }
+
ldata->echo_tail = tail;
}
static void commit_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
+ size_t nr, old;
+ size_t head;
+
+ head = ldata->echo_head;
+ old = ldata->echo_commit - ldata->echo_tail;
+
+ /* Process committed echoes if the accumulated # of bytes
+ * is over the threshold (and try again each time another
+ * block is accumulated) */
+ nr = head - ldata->echo_tail;
+ if (nr < ECHO_COMMIT_WATERMARK || (nr % ECHO_BLOCK > old % ECHO_BLOCK))
+ return;
mutex_lock(&ldata->output_lock);
- ldata->echo_commit = ldata->echo_head;
+ ldata->echo_commit = head;
__process_echoes(tty);
mutex_unlock(&ldata->output_lock);
@@ -797,37 +827,29 @@ static void process_echoes(struct tty_struct *tty)
tty->ops->flush_chars(tty);
}
+static void flush_echoes(struct tty_struct *tty)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+
+ if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_head)
+ return;
+
+ mutex_lock(&ldata->output_lock);
+ ldata->echo_commit = ldata->echo_head;
+ __process_echoes(tty);
+ mutex_unlock(&ldata->output_lock);
+}
+
/**
* add_echo_byte - add a byte to the echo buffer
* @c: unicode byte to echo
* @ldata: n_tty data
*
* Add a character or operation byte to the echo buffer.
- *
- * Locks: may claim output_lock to prevent concurrent modify of
- * echo_tail by process_echoes().
*/
-static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
+static inline void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
- if (ldata->echo_head - ldata->echo_tail == N_TTY_BUF_SIZE) {
- size_t head = ldata->echo_head;
-
- mutex_lock(&ldata->output_lock);
- /*
- * Since the buffer start position needs to be advanced,
- * be sure to step by a whole operation byte group.
- */
- if (echo_buf(ldata, head) == ECHO_OP_START) {
- if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB)
- ldata->echo_tail += 3;
- else
- ldata->echo_tail += 2;
- } else
- ldata->echo_tail++;
- mutex_unlock(&ldata->output_lock);
- }
-
*echo_buf_addr(ldata, ldata->echo_head++) = c;
}
@@ -1515,6 +1537,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
break;
}
}
+
+ flush_echoes(tty);
if (tty->ops->flush_chars)
tty->ops->flush_chars(tty);
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 7/9] n_tty: Only flush echo output if actually output
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
` (5 preceding siblings ...)
2013-04-15 15:29 ` [PATCH 6/9] n_tty: Process echoes in blocks Peter Hurley
@ 2013-04-15 15:29 ` Peter Hurley
2013-04-15 15:29 ` [PATCH 8/9] n_tty: Eliminate counter in __process_echoes Peter Hurley
` (2 subsequent siblings)
9 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Don't have the driver flush received echoes if no echoes were
actually output.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 6f507f5..a601c46 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -645,14 +645,14 @@ break_out:
* Locking: callers must hold output_lock
*/
-static void __process_echoes(struct tty_struct *tty)
+static size_t __process_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
- int space, nr;
+ int space, old_space;
size_t tail;
unsigned char c;
- space = tty_write_room(tty);
+ old_space = space = tty_write_room(tty);
tail = ldata->echo_tail;
nr = ldata->echo_commit - ldata->echo_tail;
@@ -785,12 +785,13 @@ static void __process_echoes(struct tty_struct *tty)
}
ldata->echo_tail = tail;
+ return old_space - space;
}
static void commit_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
- size_t nr, old;
+ size_t nr, old, echoed;
size_t head;
head = ldata->echo_head;
@@ -805,25 +806,26 @@ static void commit_echoes(struct tty_struct *tty)
mutex_lock(&ldata->output_lock);
ldata->echo_commit = head;
- __process_echoes(tty);
+ echoed = __process_echoes(tty);
mutex_unlock(&ldata->output_lock);
- if (tty->ops->flush_chars)
+ if (echoed && tty->ops->flush_chars)
tty->ops->flush_chars(tty);
}
static void process_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
+ size_t echoed;
if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_tail)
return;
mutex_lock(&ldata->output_lock);
- __process_echoes(tty);
+ echoed = __process_echoes(tty);
mutex_unlock(&ldata->output_lock);
- if (tty->ops->flush_chars)
+ if (echoed && tty->ops->flush_chars)
tty->ops->flush_chars(tty);
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 8/9] n_tty: Eliminate counter in __process_echoes
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
` (6 preceding siblings ...)
2013-04-15 15:29 ` [PATCH 7/9] n_tty: Only flush echo output if actually output Peter Hurley
@ 2013-04-15 15:29 ` Peter Hurley
2013-04-15 15:29 ` [PATCH 9/9] n_tty: Avoid false-sharing echo buffer indices Peter Hurley
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
9 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Since neither echo_commit nor echo_tail can change for the duration
of __process_echoes loop, substitute index comparison for the
snapshot counter.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index a601c46..eb20777 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -655,8 +655,7 @@ static size_t __process_echoes(struct tty_struct *tty)
old_space = space = tty_write_room(tty);
tail = ldata->echo_tail;
- nr = ldata->echo_commit - ldata->echo_tail;
- while (nr > 0) {
+ while (ldata->echo_commit != tail) {
c = echo_buf(ldata, tail);
if (c == ECHO_OP_START) {
unsigned char op;
@@ -700,20 +699,17 @@ static size_t __process_echoes(struct tty_struct *tty)
ldata->column--;
}
tail += 3;
- nr -= 3;
break;
case ECHO_OP_SET_CANON_COL:
ldata->canon_column = ldata->column;
tail += 2;
- nr -= 2;
break;
case ECHO_OP_MOVE_BACK_COL:
if (ldata->column > 0)
ldata->column--;
tail += 2;
- nr -= 2;
break;
case ECHO_OP_START:
@@ -726,7 +722,6 @@ static size_t __process_echoes(struct tty_struct *tty)
ldata->column++;
space--;
tail += 2;
- nr -= 2;
break;
default:
@@ -748,7 +743,6 @@ static size_t __process_echoes(struct tty_struct *tty)
ldata->column += 2;
space -= 2;
tail += 2;
- nr -= 2;
}
if (no_space_left)
@@ -767,7 +761,6 @@ static size_t __process_echoes(struct tty_struct *tty)
space -= 1;
}
tail += 1;
- nr -= 1;
}
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 9/9] n_tty: Avoid false-sharing echo buffer indices
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
` (7 preceding siblings ...)
2013-04-15 15:29 ` [PATCH 8/9] n_tty: Eliminate counter in __process_echoes Peter Hurley
@ 2013-04-15 15:29 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
9 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Separate the head & commit indices from the tail index to avoid
cache-line contention (so called 'false-sharing') between concurrent
threads.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index eb20777..aa63cd3 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -90,6 +90,8 @@ struct n_tty_data {
/* producer-published */
size_t read_head;
size_t canon_head;
+ size_t echo_head;
+ size_t echo_commit;
DECLARE_BITMAP(process_char_map, 256);
/* private to n_tty_receive_overrun (single-threaded) */
@@ -105,20 +107,17 @@ struct n_tty_data {
/* shared by producer and consumer */
char *read_buf;
DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
+ unsigned char *echo_buf;
int minimum_to_wake;
/* consumer-published */
size_t read_tail;
- unsigned char *echo_buf;
- size_t echo_head;
- size_t echo_tail;
- size_t echo_commit;
-
/* protected by output lock */
unsigned int column;
unsigned int canon_column;
+ size_t echo_tail;
struct mutex atomic_read_lock;
struct mutex output_lock;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 00/20] streamline per-char receiving
2013-04-15 15:29 ` [PATCH 0/9] mostly lockless tty echo Peter Hurley
` (8 preceding siblings ...)
2013-04-15 15:29 ` [PATCH 9/9] n_tty: Avoid false-sharing echo buffer indices Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 01/20] n_tty: Fix EOF push handling Peter Hurley
` (19 more replies)
9 siblings, 20 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
This 4th of 4 patchsets implements efficient per-char receiving
in the N_TTY line discipline. As mentioned in the initial patchset,
'lockless n_tty receive path', casual performance measurements show
a 9~15x speedup in end-to-end copying.
Most of this patchset factors out modal conditions from the per-char
i/o path. For example, regardless of if ISTRIP is set or not, the modal
condition, I_ISTRIP(tty), was tested on every char received, despite
that ISTRIP can only be set by termios changes.
The modes handled by separate code paths are:
1) 'real raw' mode (which was already handled separately)
2) raw mode
3) EXTPROC when ISTRIP and IUCLC are not selected
4) tty closing mode
5) LNEXT mode
6) ISTRIP or IUCLC or IPARMRK set
7) everything else
The code duplication is kept to a minimum by carefully factoring out
shared slow paths (such as specially handled chars in canonical mode
or receiving PARITY or OVERRUN flags); only the per-char loops themselves
are duplicated.
Peter Hurley (20):
n_tty: Fix EOF push handling
n_tty: Remove alias ptrs in __receive_buf()
n_tty: Move buffers into n_tty_data
n_tty: Rename process_char_map to char_map
n_tty: Simplify __receive_buf loop count
n_tty: Factor 'real raw' receive_buf into standalone fn
n_tty: Factor signal char handling into separate fn
n_tty: Factor flagged char handling into separate fn
n_tty: Factor raw mode receive_buf() into separate fn
n_tty: Special case EXTPROC receive_buf() as raw mode
n_tty: Factor tty->closing receive_buf() into separate fn
n_tty: Factor standard per-char i/o into separate fn
n_tty: Eliminate char tests from IXANY restart test
n_tty: Split n_tty_receive_char()
n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn
n_tty: Factor PARMRK from normal per-char i/o
n_tty: Remove overflow tests from receive_buf() path
n_tty: Un-inline single-use functions
n_tty: Factor LNEXT processing from per-char i/o path
tty: Remove extra wakeup from pty write() path
drivers/tty/n_tty.c | 617 +++++++++++++++++++++++++++++++--------------------
drivers/tty/pty.c | 4 +-
drivers/tty/tty_io.c | 1 -
include/linux/tty.h | 1 -
4 files changed, 381 insertions(+), 242 deletions(-)
--
1.8.1.2
^ permalink raw reply [flat|nested] 238+ messages in thread* [PATCH 01/20] n_tty: Fix EOF push handling
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 02/20] n_tty: Remove alias ptrs in __receive_buf() Peter Hurley
` (18 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
In canonical mode, an EOF which is not the first character of the line
causes read() to complete and return the number of characters read so
far (commonly referred to as EOF push). However, if the previous read()
returned because the user buffer was full _and_ the next character
is an EOF not at the beginning of the line, read() must not return 0,
thus mistakenly indicating the end-of-file condition.
The TTY_PUSH flag is used to indicate an EOF was received which is not
at the beginning of the line. Because the EOF push condition is
evaluated by a thread other than the read(), multiple EOF pushes can
cause a premature end-of-file to be indicated.
Instead, discover the 'EOF push as first read character' condition
from the read() thread itself, and restart the i/o loop if detected.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 34 +++++++++++++++++-----------------
drivers/tty/tty_io.c | 1 -
include/linux/tty.h | 1 -
3 files changed, 17 insertions(+), 19 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index aa63cd3..4dbebc8 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -113,6 +113,7 @@ struct n_tty_data {
/* consumer-published */
size_t read_tail;
+ size_t line_start;
/* protected by output lock */
unsigned int column;
@@ -336,6 +337,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
{
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0;
+ ldata->line_start = 0;
ldata->erasing = 0;
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
@@ -1396,8 +1398,6 @@ send_signal:
if (c == EOF_CHAR(tty)) {
if (read_cnt(ldata) >= N_TTY_BUF_SIZE)
return;
- if (ldata->canon_head != ldata->read_head)
- set_bit(TTY_PUSH, &tty->flags);
c = __DISABLED_CHAR;
goto handle_newline;
}
@@ -1604,6 +1604,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
if (canon_change) {
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
+ ldata->line_start = 0;
ldata->canon_head = ldata->read_tail;
ldata->erasing = 0;
ldata->lnext = 0;
@@ -1834,6 +1835,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
size_t eol;
size_t tail;
int ret, found = 0;
+ bool eof_push = 0;
/* N.B. avoid overrun if nr == 0 */
n = min(*nr, read_cnt(ldata));
@@ -1860,8 +1862,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
n = (found + eol + size) & (N_TTY_BUF_SIZE - 1);
c = n;
- if (found && read_buf(ldata, eol) == __DISABLED_CHAR)
+ if (found && read_buf(ldata, eol) == __DISABLED_CHAR) {
n--;
+ eof_push = !n && ldata->read_tail != ldata->line_start;
+ }
n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu size:%zu more:%zu\n",
__func__, eol, found, n, c, size, more);
@@ -1884,9 +1888,11 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
smp_mb__after_clear_bit();
ldata->read_tail += c;
- if (found)
+ if (found) {
+ ldata->line_start = ldata->read_tail;
tty_audit_push(tty);
- return 0;
+ }
+ return eof_push ? -EAGAIN : 0;
}
extern ssize_t redirected_tty_write(struct file *, const char __user *,
@@ -1961,12 +1967,10 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
int c;
int minimum, time;
ssize_t retval = 0;
- ssize_t size;
long timeout;
unsigned long flags;
int packet;
-do_it_again:
c = job_control(tty, file);
if (c < 0)
return c;
@@ -2073,7 +2077,10 @@ do_it_again:
if (ldata->icanon && !L_EXTPROC(tty)) {
retval = canon_copy_from_read_buf(tty, &b, &nr);
- if (retval)
+ if (retval == -EAGAIN) {
+ retval = 0;
+ continue;
+ } else if (retval)
break;
} else {
int uncopied;
@@ -2101,15 +2108,8 @@ do_it_again:
ldata->minimum_to_wake = minimum;
__set_current_state(TASK_RUNNING);
- size = b - buf;
- if (size) {
- retval = size;
- if (nr)
- clear_bit(TTY_PUSH, &tty->flags);
- } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) {
- up_read(&tty->termios_rwsem);
- goto do_it_again;
- }
+ if (b - buf)
+ retval = b - buf;
n_tty_set_room(tty);
up_read(&tty->termios_rwsem);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 7be6cf0..2e01d3c 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -664,7 +664,6 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session)
spin_lock_irq(&tty->ctrl_lock);
clear_bit(TTY_THROTTLED, &tty->flags);
- clear_bit(TTY_PUSH, &tty->flags);
clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
put_pid(tty->session);
put_pid(tty->pgrp);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 747c9e2..e10846a 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -305,7 +305,6 @@ struct tty_file_private {
#define TTY_EXCLUSIVE 3 /* Exclusive open mode */
#define TTY_DEBUG 4 /* Debugging */
#define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */
-#define TTY_PUSH 6 /* n_tty private */
#define TTY_CLOSING 7 /* ->close() in progress */
#define TTY_LDISC_OPEN 11 /* Line discipline is open */
#define TTY_HW_COOK_OUT 14 /* Hardware can do output cooking */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 02/20] n_tty: Remove alias ptrs in __receive_buf()
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
2013-04-15 15:32 ` [PATCH 01/20] n_tty: Fix EOF push handling Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 03/20] n_tty: Move buffers into n_tty_data Peter Hurley
` (17 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
The char and flag buffer local alias pointers, p and f, are
unnecessary; remove them.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 4dbebc8..bfb04d3 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1485,8 +1485,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
struct n_tty_data *ldata = tty->disc_data;
- const unsigned char *p;
- char *f, flags = TTY_NORMAL;
+ char flags = TTY_NORMAL;
char buf[64];
if (ldata->real_raw) {
@@ -1508,19 +1507,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
} else {
int i;
- for (i = count, p = cp, f = fp; i; i--, p++) {
- if (f)
- flags = *f++;
+ for (i = count; i; i--, cp++) {
+ if (fp)
+ flags = *fp++;
switch (flags) {
case TTY_NORMAL:
- n_tty_receive_char(tty, *p);
+ n_tty_receive_char(tty, *cp);
break;
case TTY_BREAK:
n_tty_receive_break(tty);
break;
case TTY_PARITY:
case TTY_FRAME:
- n_tty_receive_parity_error(tty, *p);
+ n_tty_receive_parity_error(tty, *cp);
break;
case TTY_OVERRUN:
n_tty_receive_overrun(tty);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 03/20] n_tty: Move buffers into n_tty_data
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
2013-04-15 15:32 ` [PATCH 01/20] n_tty: Fix EOF push handling Peter Hurley
2013-04-15 15:32 ` [PATCH 02/20] n_tty: Remove alias ptrs in __receive_buf() Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 04/20] n_tty: Rename process_char_map to char_map Peter Hurley
` (16 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Reduce pointer reloading and improve locality-of-reference;
allocate read_buf and echo_buf within struct n_tty_data.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 25 +++++++++----------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index bfb04d3..8aac758 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -105,9 +105,9 @@ struct n_tty_data {
unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
/* shared by producer and consumer */
- char *read_buf;
+ char read_buf[N_TTY_BUF_SIZE];
DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
- unsigned char *echo_buf;
+ unsigned char echo_buf[N_TTY_BUF_SIZE];
int minimum_to_wake;
@@ -1692,9 +1692,7 @@ static void n_tty_close(struct tty_struct *tty)
if (tty->link)
n_tty_packet_mode_flush(tty);
- kfree(ldata->read_buf);
- kfree(ldata->echo_buf);
- kfree(ldata);
+ vfree(ldata);
tty->disc_data = NULL;
}
@@ -1712,7 +1710,8 @@ static int n_tty_open(struct tty_struct *tty)
{
struct n_tty_data *ldata;
- ldata = kzalloc(sizeof(*ldata), GFP_KERNEL);
+ /* Currently a malloc failure here can panic */
+ ldata = vmalloc(sizeof(*ldata));
if (!ldata)
goto err;
@@ -1720,16 +1719,14 @@ static int n_tty_open(struct tty_struct *tty)
mutex_init(&ldata->atomic_read_lock);
mutex_init(&ldata->output_lock);
- /* These are ugly. Currently a malloc failure here can panic */
- ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
- ldata->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
- if (!ldata->read_buf || !ldata->echo_buf)
- goto err_free_bufs;
-
tty->disc_data = ldata;
reset_buffer_flags(tty->disc_data);
ldata->column = 0;
+ ldata->canon_column = 0;
ldata->minimum_to_wake = 1;
+ ldata->num_overrun = 0;
+ ldata->no_room = 0;
+ ldata->lnext = 0;
tty->closing = 0;
/* indicate buffer work may resume */
clear_bit(TTY_LDISC_HALTED, &tty->flags);
@@ -1737,10 +1734,6 @@ static int n_tty_open(struct tty_struct *tty)
tty_unthrottle(tty);
return 0;
-err_free_bufs:
- kfree(ldata->read_buf);
- kfree(ldata->echo_buf);
- kfree(ldata);
err:
return -ENOMEM;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 04/20] n_tty: Rename process_char_map to char_map
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (2 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 03/20] n_tty: Move buffers into n_tty_data Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 05/20] n_tty: Simplify __receive_buf loop count Peter Hurley
` (15 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 43 ++++++++++++++++++++-----------------------
1 file changed, 20 insertions(+), 23 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 8aac758..d6997de 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -92,7 +92,7 @@ struct n_tty_data {
size_t canon_head;
size_t echo_head;
size_t echo_commit;
- DECLARE_BITMAP(process_char_map, 256);
+ DECLARE_BITMAP(char_map, 256);
/* private to n_tty_receive_overrun (single-threaded) */
unsigned long overrun_time;
@@ -1278,7 +1278,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
* handle specially, do shortcut processing to speed things
* up.
*/
- if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
+ if (!test_bit(c, ldata->char_map) || ldata->lnext) {
ldata->lnext = 0;
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
@@ -1623,41 +1623,38 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) ||
I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) ||
I_PARMRK(tty)) {
- bitmap_zero(ldata->process_char_map, 256);
+ bitmap_zero(ldata->char_map, 256);
if (I_IGNCR(tty) || I_ICRNL(tty))
- set_bit('\r', ldata->process_char_map);
+ set_bit('\r', ldata->char_map);
if (I_INLCR(tty))
- set_bit('\n', ldata->process_char_map);
+ set_bit('\n', ldata->char_map);
if (L_ICANON(tty)) {
- set_bit(ERASE_CHAR(tty), ldata->process_char_map);
- set_bit(KILL_CHAR(tty), ldata->process_char_map);
- set_bit(EOF_CHAR(tty), ldata->process_char_map);
- set_bit('\n', ldata->process_char_map);
- set_bit(EOL_CHAR(tty), ldata->process_char_map);
+ set_bit(ERASE_CHAR(tty), ldata->char_map);
+ set_bit(KILL_CHAR(tty), ldata->char_map);
+ set_bit(EOF_CHAR(tty), ldata->char_map);
+ set_bit('\n', ldata->char_map);
+ set_bit(EOL_CHAR(tty), ldata->char_map);
if (L_IEXTEN(tty)) {
- set_bit(WERASE_CHAR(tty),
- ldata->process_char_map);
- set_bit(LNEXT_CHAR(tty),
- ldata->process_char_map);
- set_bit(EOL2_CHAR(tty),
- ldata->process_char_map);
+ set_bit(WERASE_CHAR(tty), ldata->char_map);
+ set_bit(LNEXT_CHAR(tty), ldata->char_map);
+ set_bit(EOL2_CHAR(tty), ldata->char_map);
if (L_ECHO(tty))
set_bit(REPRINT_CHAR(tty),
- ldata->process_char_map);
+ ldata->char_map);
}
}
if (I_IXON(tty)) {
- set_bit(START_CHAR(tty), ldata->process_char_map);
- set_bit(STOP_CHAR(tty), ldata->process_char_map);
+ set_bit(START_CHAR(tty), ldata->char_map);
+ set_bit(STOP_CHAR(tty), ldata->char_map);
}
if (L_ISIG(tty)) {
- set_bit(INTR_CHAR(tty), ldata->process_char_map);
- set_bit(QUIT_CHAR(tty), ldata->process_char_map);
- set_bit(SUSP_CHAR(tty), ldata->process_char_map);
+ set_bit(INTR_CHAR(tty), ldata->char_map);
+ set_bit(QUIT_CHAR(tty), ldata->char_map);
+ set_bit(SUSP_CHAR(tty), ldata->char_map);
}
- clear_bit(__DISABLED_CHAR, ldata->process_char_map);
+ clear_bit(__DISABLED_CHAR, ldata->char_map);
ldata->raw = 0;
ldata->real_raw = 0;
} else {
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 05/20] n_tty: Simplify __receive_buf loop count
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (3 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 04/20] n_tty: Rename process_char_map to char_map Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 06/20] n_tty: Factor 'real raw' receive_buf into standalone fn Peter Hurley
` (14 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d6997de..b77d16f 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1505,21 +1505,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
memcpy(read_buf_addr(ldata, head), cp, n);
ldata->read_head += n;
} else {
- int i;
-
- for (i = count; i; i--, cp++) {
+ while (count--) {
if (fp)
flags = *fp++;
switch (flags) {
case TTY_NORMAL:
- n_tty_receive_char(tty, *cp);
+ n_tty_receive_char(tty, *cp++);
break;
case TTY_BREAK:
n_tty_receive_break(tty);
break;
case TTY_PARITY:
case TTY_FRAME:
- n_tty_receive_parity_error(tty, *cp);
+ n_tty_receive_parity_error(tty, *cp++);
break;
case TTY_OVERRUN:
n_tty_receive_overrun(tty);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 06/20] n_tty: Factor 'real raw' receive_buf into standalone fn
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (4 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 05/20] n_tty: Simplify __receive_buf loop count Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 07/20] n_tty: Factor signal char handling into separate fn Peter Hurley
` (13 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Convert to modal receive_buf() processing; factor real_raw
receive_buf() into n_tty_receive_buf_real_raw().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 51 ++++++++++++++++++++++++++++++---------------------
1 file changed, 30 insertions(+), 21 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index b77d16f..b379986 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -242,7 +242,7 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
}
-static inline void n_tty_check_throttle(struct tty_struct *tty)
+static void n_tty_check_throttle(struct tty_struct *tty)
{
if (tty->driver->type == TTY_DRIVER_TYPE_PTY)
return;
@@ -1481,6 +1481,28 @@ handle_newline:
* publishes read_head and canon_head
*/
+static void
+n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ size_t n, head;
+
+ head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
+ n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
+ n = min_t(size_t, count, n);
+ memcpy(read_buf_addr(ldata, head), cp, n);
+ ldata->read_head += n;
+ cp += n;
+ count -= n;
+
+ head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
+ n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
+ n = min_t(size_t, count, n);
+ memcpy(read_buf_addr(ldata, head), cp, n);
+ ldata->read_head += n;
+}
+
static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
@@ -1488,23 +1510,9 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char flags = TTY_NORMAL;
char buf[64];
- if (ldata->real_raw) {
- size_t n, head;
-
- head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
- n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
- n = min_t(size_t, count, n);
- memcpy(read_buf_addr(ldata, head), cp, n);
- ldata->read_head += n;
- cp += n;
- count -= n;
-
- head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
- n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
- n = min_t(size_t, count, n);
- memcpy(read_buf_addr(ldata, head), cp, n);
- ldata->read_head += n;
- } else {
+ if (ldata->real_raw)
+ n_tty_receive_buf_real_raw(tty, cp, fp, count);
+ else {
while (count--) {
if (fp)
flags = *fp++;
@@ -1540,8 +1548,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
}
-
- n_tty_check_throttle(tty);
}
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
@@ -1549,6 +1555,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
{
down_read(&tty->termios_rwsem);
__receive_buf(tty, cp, fp, count);
+ n_tty_check_throttle(tty);
up_read(&tty->termios_rwsem);
}
@@ -1564,8 +1571,10 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
if (!room)
ldata->no_room = 1;
count = min(count, room);
- if (count)
+ if (count) {
__receive_buf(tty, cp, fp, count);
+ n_tty_check_throttle(tty);
+ }
up_read(&tty->termios_rwsem);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 07/20] n_tty: Factor signal char handling into separate fn
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (5 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 06/20] n_tty: Factor 'real raw' receive_buf into standalone fn Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 08/20] n_tty: Factor flagged " Peter Hurley
` (12 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Reduce the monolithic n_tty_receive_char() complexity; factor the
handling of INTR_CHAR, QUIT_CHAR and SUSP_CHAR into
n_tty_receive_signal_char().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 52 ++++++++++++++++++++++++++++------------------------
1 file changed, 28 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index b379986..e8df595 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1219,6 +1219,26 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty,
wake_up_interruptible(&tty->read_wait);
}
+static void
+n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
+{
+ if (!L_NOFLSH(tty)) {
+ /* flushing needs exclusive termios_rwsem */
+ up_read(&tty->termios_rwsem);
+ n_tty_flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
+ down_read(&tty->termios_rwsem);
+ }
+ if (I_IXON(tty))
+ start_tty(tty);
+ if (L_ECHO(tty)) {
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ isig(signal, tty);
+ return;
+}
+
/**
* n_tty_receive_char - perform processing
* @tty: terminal device
@@ -1314,30 +1334,14 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
}
if (L_ISIG(tty)) {
- int signal;
- signal = SIGINT;
- if (c == INTR_CHAR(tty))
- goto send_signal;
- signal = SIGQUIT;
- if (c == QUIT_CHAR(tty))
- goto send_signal;
- signal = SIGTSTP;
- if (c == SUSP_CHAR(tty)) {
-send_signal:
- if (!L_NOFLSH(tty)) {
- /* flushing needs exclusive termios_rwsem */
- up_read(&tty->termios_rwsem);
- n_tty_flush_buffer(tty);
- tty_driver_flush_buffer(tty);
- down_read(&tty->termios_rwsem);
- }
- if (I_IXON(tty))
- start_tty(tty);
- if (L_ECHO(tty)) {
- echo_char(c, tty);
- commit_echoes(tty);
- }
- isig(signal, tty);
+ if (c == INTR_CHAR(tty)) {
+ n_tty_receive_signal_char(tty, SIGINT, c);
+ return;
+ } else if (c == QUIT_CHAR(tty)) {
+ n_tty_receive_signal_char(tty, SIGQUIT, c);
+ return;
+ } else if (c == SUSP_CHAR(tty)) {
+ n_tty_receive_signal_char(tty, SIGTSTP, c);
return;
}
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 08/20] n_tty: Factor flagged char handling into separate fn
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (6 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 07/20] n_tty: Factor signal char handling into separate fn Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 09/20] n_tty: Factor raw mode receive_buf() " Peter Hurley
` (11 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Prepare for modal receive_buf() handling; factor handling for
TTY_BREAK, TTY_PARITY, TTY_FRAME and TTY_OVERRUN into
n_tty_receive_char_flagged().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 50 +++++++++++++++++++++++++++++---------------------
1 file changed, 29 insertions(+), 21 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index e8df595..dce77cb 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1468,6 +1468,29 @@ handle_newline:
put_tty_queue(c, ldata);
}
+static void
+n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag)
+{
+ char buf[64];
+
+ switch (flag) {
+ case TTY_BREAK:
+ n_tty_receive_break(tty);
+ break;
+ case TTY_PARITY:
+ case TTY_FRAME:
+ n_tty_receive_parity_error(tty, c);
+ break;
+ case TTY_OVERRUN:
+ n_tty_receive_overrun(tty);
+ break;
+ default:
+ printk(KERN_ERR "%s: unknown flag %d\n",
+ tty_name(tty, buf), flag);
+ break;
+ }
+}
+
/**
* n_tty_receive_buf - data receive
* @tty: terminal device
@@ -1511,34 +1534,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
struct n_tty_data *ldata = tty->disc_data;
- char flags = TTY_NORMAL;
- char buf[64];
if (ldata->real_raw)
n_tty_receive_buf_real_raw(tty, cp, fp, count);
else {
+ char flag = TTY_NORMAL;
+
while (count--) {
if (fp)
- flags = *fp++;
- switch (flags) {
- case TTY_NORMAL:
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL))
n_tty_receive_char(tty, *cp++);
- break;
- case TTY_BREAK:
- n_tty_receive_break(tty);
- break;
- case TTY_PARITY:
- case TTY_FRAME:
- n_tty_receive_parity_error(tty, *cp++);
- break;
- case TTY_OVERRUN:
- n_tty_receive_overrun(tty);
- break;
- default:
- printk(KERN_ERR "%s: unknown flag %d\n",
- tty_name(tty, buf), flags);
- break;
- }
+ else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
}
flush_echoes(tty);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 09/20] n_tty: Factor raw mode receive_buf() into separate fn
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (7 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 08/20] n_tty: Factor flagged " Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 10/20] n_tty: Special case EXTPROC receive_buf() as raw mode Peter Hurley
` (10 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Convert to modal receive_buf() processing; factor raw mode
per-char i/o into n_tty_receive_buf_raw().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index dce77cb..cf99660 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1259,11 +1259,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
struct n_tty_data *ldata = tty->disc_data;
int parmrk;
- if (ldata->raw) {
- put_tty_queue(c, ldata);
- return;
- }
-
if (I_ISTRIP(tty))
c &= 0x7f;
if (I_IUCLC(tty) && L_IEXTEN(tty))
@@ -1530,6 +1525,23 @@ n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp,
ldata->read_head += n;
}
+static void
+n_tty_receive_buf_raw(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ char flag = TTY_NORMAL;
+
+ while (count--) {
+ if (fp)
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL))
+ put_tty_queue(*cp++, ldata);
+ else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
+ }
+}
+
static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
@@ -1537,6 +1549,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
if (ldata->real_raw)
n_tty_receive_buf_real_raw(tty, cp, fp, count);
+ else if (ldata->raw)
+ n_tty_receive_buf_raw(tty, cp, fp, count);
else {
char flag = TTY_NORMAL;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 10/20] n_tty: Special case EXTPROC receive_buf() as raw mode
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (8 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 09/20] n_tty: Factor raw mode receive_buf() " Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 11/20] n_tty: Factor tty->closing receive_buf() into separate fn Peter Hurley
` (9 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
When EXTPROC is set without ISTRIP or IUCLC, processing is
identical to raw mode; handle this receiving mode as a special-case
of raw mode.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index cf99660..9b52bf9 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1546,10 +1546,11 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
struct n_tty_data *ldata = tty->disc_data;
+ bool preops = I_ISTRIP(tty) || (I_IUCLC(tty) && L_IEXTEN(tty));
if (ldata->real_raw)
n_tty_receive_buf_real_raw(tty, cp, fp, count);
- else if (ldata->raw)
+ else if (ldata->raw || (L_EXTPROC(tty) && !preops))
n_tty_receive_buf_raw(tty, cp, fp, count);
else {
char flag = TTY_NORMAL;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 11/20] n_tty: Factor tty->closing receive_buf() into separate fn
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (9 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 10/20] n_tty: Special case EXTPROC receive_buf() as raw mode Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 12/20] n_tty: Factor standard per-char i/o " Peter Hurley
` (8 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Convert to modal receive_buf() processing; factor receive char
processing when tty->closing into n_tty_receive_buf_closing().
Note that EXTPROC when ISTRIP or IUCLC is set continues to be
handled by n_tty_receive_char().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 50 +++++++++++++++++++++++++++++++++++++++-----------
1 file changed, 39 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 9b52bf9..81e2bb3 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1276,17 +1276,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
process_echoes(tty);
}
- if (tty->closing) {
- if (I_IXON(tty)) {
- if (c == START_CHAR(tty)) {
- start_tty(tty);
- process_echoes(tty);
- } else if (c == STOP_CHAR(tty))
- stop_tty(tty);
- }
- return;
- }
-
/*
* If the previous character was LNEXT, or we know that this
* character is not one of the characters that we'll have to
@@ -1463,6 +1452,27 @@ handle_newline:
put_tty_queue(c, ldata);
}
+static inline void
+n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
+{
+ if (I_ISTRIP(tty))
+ c &= 0x7f;
+ if (I_IUCLC(tty) && L_IEXTEN(tty))
+ c = tolower(c);
+
+ if (I_IXON(tty)) {
+ if (c == STOP_CHAR(tty))
+ stop_tty(tty);
+ else if (c == START_CHAR(tty) ||
+ (tty->stopped && !tty->flow_stopped && I_IXANY(tty) &&
+ c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) &&
+ c != SUSP_CHAR(tty))) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+ }
+}
+
static void
n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag)
{
@@ -1542,6 +1552,22 @@ n_tty_receive_buf_raw(struct tty_struct *tty, const unsigned char *cp,
}
}
+static void
+n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ char flag = TTY_NORMAL;
+
+ while (count--) {
+ if (fp)
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL))
+ n_tty_receive_char_closing(tty, *cp++);
+ else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
+ }
+}
+
static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
@@ -1552,6 +1578,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
n_tty_receive_buf_real_raw(tty, cp, fp, count);
else if (ldata->raw || (L_EXTPROC(tty) && !preops))
n_tty_receive_buf_raw(tty, cp, fp, count);
+ else if (tty->closing && !L_EXTPROC(tty))
+ n_tty_receive_buf_closing(tty, cp, fp, count);
else {
char flag = TTY_NORMAL;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 12/20] n_tty: Factor standard per-char i/o into separate fn
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (10 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 11/20] n_tty: Factor tty->closing receive_buf() into separate fn Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 13/20] n_tty: Eliminate char tests from IXANY restart test Peter Hurley
` (7 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Simplify __receive_buf() into a dispatch function; perform per-char
processing for all other modes not already handled.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 81e2bb3..8808833 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1568,6 +1568,23 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
}
}
+static void
+n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ char flag = TTY_NORMAL;
+
+ while (count--) {
+ if (fp)
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL))
+ n_tty_receive_char(tty, *cp++);
+ else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
+ }
+}
+
static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
@@ -1581,16 +1598,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
- char flag = TTY_NORMAL;
-
- while (count--) {
- if (fp)
- flag = *fp++;
- if (likely(flag == TTY_NORMAL))
- n_tty_receive_char(tty, *cp++);
- else
- n_tty_receive_char_flagged(tty, *cp++, flag);
- }
+ n_tty_receive_buf_standard(tty, cp, fp, count);
flush_echoes(tty);
if (tty->ops->flush_chars)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 13/20] n_tty: Eliminate char tests from IXANY restart test
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (11 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 12/20] n_tty: Factor standard per-char i/o " Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 14/20] n_tty: Split n_tty_receive_char() Peter Hurley
` (6 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Relocate the IXANY restart tty test to code paths where the
the received char is not START_CHAR, STOP_CHAR, INTR_CHAR,
QUIT_CHAR or SUSP_CHAR.
Fixes the condition when ISIG if off and one of INTR_CHAR,
QUIT_CHAR or SUSP_CHAR does not restart i/o.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 8808833..33994e6 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1269,13 +1269,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
return;
}
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) &&
- c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
-
/*
* If the previous character was LNEXT, or we know that this
* character is not one of the characters that we'll have to
@@ -1284,6 +1277,13 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
*/
if (!test_bit(c, ldata->char_map) || ldata->lnext) {
ldata->lnext = 0;
+
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
+ I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
@@ -1330,6 +1330,11 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
}
}
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
if (c == '\r') {
if (I_IGNCR(tty))
return;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 14/20] n_tty: Split n_tty_receive_char()
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (12 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 13/20] n_tty: Eliminate char tests from IXANY restart test Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 15/20] n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn Peter Hurley
` (5 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Factor 'special' per-char processing into standalone fn,
n_tty_receive_char_special(), which handles processing for chars
marked in the char_map.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 103 ++++++++++++++++++++++++++++------------------------
1 file changed, 56 insertions(+), 47 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 33994e6..8601d6e 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1254,57 +1254,12 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
* otherwise, publishes read_head via put_tty_queue()
*/
-static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+static void
+n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
int parmrk;
- if (I_ISTRIP(tty))
- c &= 0x7f;
- if (I_IUCLC(tty) && L_IEXTEN(tty))
- c = tolower(c);
-
- if (L_EXTPROC(tty)) {
- put_tty_queue(c, ldata);
- return;
- }
-
- /*
- * If the previous character was LNEXT, or we know that this
- * character is not one of the characters that we'll have to
- * handle specially, do shortcut processing to speed things
- * up.
- */
- if (!test_bit(c, ldata->char_map) || ldata->lnext) {
- ldata->lnext = 0;
-
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
-
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
- if (L_ECHO(tty)) {
- finish_erasing(ldata);
- /* Record the column of first canon char. */
- if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(ldata);
- echo_char(c, tty);
- commit_echoes(tty);
- }
- if (parmrk)
- put_tty_queue(c, ldata);
- put_tty_queue(c, ldata);
- return;
- }
-
if (I_IXON(tty)) {
if (c == START_CHAR(tty)) {
start_tty(tty);
@@ -1457,6 +1412,60 @@ handle_newline:
put_tty_queue(c, ldata);
}
+static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ int parmrk;
+
+ if (I_ISTRIP(tty))
+ c &= 0x7f;
+ if (I_IUCLC(tty) && L_IEXTEN(tty))
+ c = tolower(c);
+
+ if (L_EXTPROC(tty)) {
+ put_tty_queue(c, ldata);
+ return;
+ }
+
+ /*
+ * If the previous character was LNEXT, or we know that this
+ * character is not one of the characters that we'll have to
+ * handle specially, do shortcut processing to speed things
+ * up.
+ */
+ if (!test_bit(c, ldata->char_map) || ldata->lnext) {
+ ldata->lnext = 0;
+
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
+ I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
+ parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ /* beep if no space */
+ if (L_ECHO(tty))
+ process_output('\a', tty);
+ return;
+ }
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ if (parmrk)
+ put_tty_queue(c, ldata);
+ put_tty_queue(c, ldata);
+ return;
+ }
+
+ n_tty_receive_char_special(tty, c);
+}
+
static inline void
n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
{
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 15/20] n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (13 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 14/20] n_tty: Split n_tty_receive_char() Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 16/20] n_tty: Factor PARMRK from normal per-char i/o Peter Hurley
` (4 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Convert to modal receive_buf processing; factor char receive
processing for unusual termios settings out of normal per-char
i/o path.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 44 +++++++++++++++++++++++++++++++-------------
1 file changed, 31 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 8601d6e..6316426 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1417,16 +1417,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
struct n_tty_data *ldata = tty->disc_data;
int parmrk;
- if (I_ISTRIP(tty))
- c &= 0x7f;
- if (I_IUCLC(tty) && L_IEXTEN(tty))
- c = tolower(c);
-
- if (L_EXTPROC(tty)) {
- put_tty_queue(c, ldata);
- return;
- }
-
/*
* If the previous character was LNEXT, or we know that this
* character is not one of the characters that we'll have to
@@ -1584,9 +1574,34 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
static void
n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp,
- char *fp, int count)
+ char *fp, int count)
+{
+ char flag = TTY_NORMAL;
+
+ while (count--) {
+ if (fp)
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL)) {
+ unsigned char c = *cp++;
+
+ if (I_ISTRIP(tty))
+ c &= 0x7f;
+ if (I_IUCLC(tty) && L_IEXTEN(tty))
+ c = tolower(c);
+ if (L_EXTPROC(tty)) {
+ put_tty_queue(c, ldata);
+ continue;
+ }
+ n_tty_receive_char(tty, c);
+ } else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
+ }
+}
+
+static void
+n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
{
- struct n_tty_data *ldata = tty->disc_data;
char flag = TTY_NORMAL;
while (count--) {
@@ -1612,7 +1627,10 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
- n_tty_receive_buf_standard(tty, cp, fp, count);
+ if (!preops)
+ n_tty_receive_buf_fast(tty, cp, fp, count);
+ else
+ n_tty_receive_buf_standard(tty, cp, fp, count);
flush_echoes(tty);
if (tty->ops->flush_chars)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 16/20] n_tty: Factor PARMRK from normal per-char i/o
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (14 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 15/20] n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 17/20] n_tty: Remove overflow tests from receive_buf() path Peter Hurley
` (3 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Handle PARMRK processing on the slow per-char i/o path.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 45 +++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 6316426..e26a3bf 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1457,6 +1457,47 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
}
static inline void
+n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+
+ /*
+ * If the previous character was LNEXT, or we know that this
+ * character is not one of the characters that we'll have to
+ * handle specially, do shortcut processing to speed things
+ * up.
+ */
+ if (!test_bit(c, ldata->char_map) || ldata->lnext) {
+ ldata->lnext = 0;
+
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
+ I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - 1)) {
+ /* beep if no space */
+ if (L_ECHO(tty))
+ process_output('\a', tty);
+ return;
+ }
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ put_tty_queue(c, ldata);
+ return;
+ }
+
+ n_tty_receive_char_special(tty, c);
+}
+
+static inline void
n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
{
if (I_ISTRIP(tty))
@@ -1608,7 +1649,7 @@ n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp,
if (fp)
flag = *fp++;
if (likely(flag == TTY_NORMAL))
- n_tty_receive_char(tty, *cp++);
+ n_tty_receive_char_fast(tty, *cp++);
else
n_tty_receive_char_flagged(tty, *cp++, flag);
}
@@ -1627,7 +1668,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
- if (!preops)
+ if (!preops && !I_PARMRK(tty))
n_tty_receive_buf_fast(tty, cp, fp, count);
else
n_tty_receive_buf_standard(tty, cp, fp, count);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 17/20] n_tty: Remove overflow tests from receive_buf() path
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (15 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 16/20] n_tty: Factor PARMRK from normal per-char i/o Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 18/20] n_tty: Un-inline single-use functions Peter Hurley
` (2 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Always pre-figure the space available in the read_buf and limit
the inbound receive request to that amount.
For compatibility reasons with the non-flow-controlled interface,
n_tty_receive_buf() will continue filling read_buf until all data
has been received or receive_room() returns 0.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 85 +++++++++++++++++++++++------------------------------
1 file changed, 37 insertions(+), 48 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index e26a3bf..239ec83 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -314,12 +314,9 @@ static inline void n_tty_check_unthrottle(struct tty_struct *tty)
* not active.
*/
-static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
+static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
{
- if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
- *read_buf_addr(ldata, ldata->read_head) = c;
- ldata->read_head++;
- }
+ *read_buf_addr(ldata, ldata->read_head++) = c;
}
/**
@@ -1332,11 +1329,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
return;
}
if (c == '\n') {
- if (read_cnt(ldata) >= N_TTY_BUF_SIZE) {
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty) || L_ECHONL(tty)) {
echo_char_raw('\n', ldata);
commit_echoes(tty);
@@ -1344,8 +1336,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
goto handle_newline;
}
if (c == EOF_CHAR(tty)) {
- if (read_cnt(ldata) >= N_TTY_BUF_SIZE)
- return;
c = __DISABLED_CHAR;
goto handle_newline;
}
@@ -1353,11 +1343,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
(c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk)) {
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
/*
* XXX are EOL_CHAR and EOL2_CHAR echoed?!?
*/
@@ -1387,12 +1372,6 @@ handle_newline:
}
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty)) {
finish_erasing(ldata);
if (c == '\n')
@@ -1431,14 +1410,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
start_tty(tty);
process_echoes(tty);
}
-
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty)) {
finish_erasing(ldata);
/* Record the column of first canon char. */
@@ -1447,6 +1418,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
echo_char(c, tty);
commit_echoes(tty);
}
+ parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
if (parmrk)
put_tty_queue(c, ldata);
put_tty_queue(c, ldata);
@@ -1475,13 +1447,6 @@ n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c)
start_tty(tty);
process_echoes(tty);
}
-
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty)) {
finish_erasing(ldata);
/* Record the column of first canon char. */
@@ -1689,8 +1654,23 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ int room, n;
+
down_read(&tty->termios_rwsem);
- __receive_buf(tty, cp, fp, count);
+
+ while (1) {
+ room = receive_room(tty);
+ n = min(count, room);
+ if (!n)
+ break;
+ __receive_buf(tty, cp, fp, n);
+ cp += n;
+ if (fp)
+ fp += n;
+ count -= n;
+ }
+
+ tty->receive_room = room;
n_tty_check_throttle(tty);
up_read(&tty->termios_rwsem);
}
@@ -1699,22 +1679,31 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
struct n_tty_data *ldata = tty->disc_data;
- int room;
+ int room, n, rcvd = 0;
down_read(&tty->termios_rwsem);
- tty->receive_room = room = receive_room(tty);
- if (!room)
- ldata->no_room = 1;
- count = min(count, room);
- if (count) {
- __receive_buf(tty, cp, fp, count);
- n_tty_check_throttle(tty);
+ while (1) {
+ room = receive_room(tty);
+ n = min(count, room);
+ if (!n) {
+ if (!room)
+ ldata->no_room = 1;
+ break;
+ }
+ __receive_buf(tty, cp, fp, n);
+ cp += n;
+ if (fp)
+ fp += n;
+ count -= n;
+ rcvd += n;
}
+ tty->receive_room = room;
+ n_tty_check_throttle(tty);
up_read(&tty->termios_rwsem);
- return count;
+ return rcvd;
}
int is_ignored(int sig)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 18/20] n_tty: Un-inline single-use functions
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (16 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 17/20] n_tty: Remove overflow tests from receive_buf() path Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 19/20] n_tty: Factor LNEXT processing from per-char i/o path Peter Hurley
2013-04-15 15:32 ` [PATCH 20/20] tty: Remove extra wakeup from pty write() path Peter Hurley
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
gcc will likely inline these single-use functions anyway; remove
inline modifier.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 239ec83..40dd1e9 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -263,7 +263,7 @@ static void n_tty_check_throttle(struct tty_struct *tty)
__tty_set_flow_change(tty, 0);
}
-static inline void n_tty_check_unthrottle(struct tty_struct *tty)
+static void n_tty_check_unthrottle(struct tty_struct *tty)
{
if (tty->driver->type == TTY_DRIVER_TYPE_PTY) {
if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
@@ -1109,7 +1109,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
* Locking: ctrl_lock
*/
-static inline void isig(int sig, struct tty_struct *tty)
+static void isig(int sig, struct tty_struct *tty)
{
struct pid *tty_pgrp = tty_get_pgrp(tty);
if (tty_pgrp) {
@@ -1132,7 +1132,7 @@ static inline void isig(int sig, struct tty_struct *tty)
* Note: may get exclusive termios_rwsem if flushing input buffer
*/
-static inline void n_tty_receive_break(struct tty_struct *tty)
+static void n_tty_receive_break(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
@@ -1170,7 +1170,7 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
* private.
*/
-static inline void n_tty_receive_overrun(struct tty_struct *tty)
+static void n_tty_receive_overrun(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
char buf[64];
@@ -1198,8 +1198,7 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty)
* caller holds non-exclusive termios_rwsem
* publishes read_head via put_tty_queue()
*/
-static inline void n_tty_receive_parity_error(struct tty_struct *tty,
- unsigned char c)
+static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 19/20] n_tty: Factor LNEXT processing from per-char i/o path
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (17 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 18/20] n_tty: Un-inline single-use functions Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
2013-04-15 15:32 ` [PATCH 20/20] tty: Remove extra wakeup from pty write() path Peter Hurley
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
LNEXT processing accounts for ~15% of total cpu time in end-to-end
tty i/o; factor the lnext test/clear from the per-char i/o path.
Instead, attempt to immediately handle the literal next char if not
at the end of this received buffer; otherwise, handle the first char
of the next received buffer as the literal next char, then continue
with normal i/o.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 167 ++++++++++++++++++++++++++++++----------------------
1 file changed, 95 insertions(+), 72 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 40dd1e9..5d95873 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1248,9 +1248,11 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
* caller holds non-exclusive termios_rwsem
* publishes canon_head if canonical mode is active
* otherwise, publishes read_head via put_tty_queue()
+ *
+ * Returns 1 if LNEXT was received, else returns 0
*/
-static void
+static int
n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
@@ -1260,24 +1262,24 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
if (c == START_CHAR(tty)) {
start_tty(tty);
commit_echoes(tty);
- return;
+ return 0;
}
if (c == STOP_CHAR(tty)) {
stop_tty(tty);
- return;
+ return 0;
}
}
if (L_ISIG(tty)) {
if (c == INTR_CHAR(tty)) {
n_tty_receive_signal_char(tty, SIGINT, c);
- return;
+ return 0;
} else if (c == QUIT_CHAR(tty)) {
n_tty_receive_signal_char(tty, SIGQUIT, c);
- return;
+ return 0;
} else if (c == SUSP_CHAR(tty)) {
n_tty_receive_signal_char(tty, SIGTSTP, c);
- return;
+ return 0;
}
}
@@ -1288,7 +1290,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
if (c == '\r') {
if (I_IGNCR(tty))
- return;
+ return 0;
if (I_ICRNL(tty))
c = '\n';
} else if (c == '\n' && I_INLCR(tty))
@@ -1299,7 +1301,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
(c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
eraser(c, tty);
commit_echoes(tty);
- return;
+ return 0;
}
if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
ldata->lnext = 1;
@@ -1311,10 +1313,9 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
commit_echoes(tty);
}
}
- return;
+ return 1;
}
- if (c == REPRINT_CHAR(tty) && L_ECHO(tty) &&
- L_IEXTEN(tty)) {
+ if (c == REPRINT_CHAR(tty) && L_ECHO(tty) && L_IEXTEN(tty)) {
size_t tail = ldata->canon_head;
finish_erasing(ldata);
@@ -1325,7 +1326,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
tail++;
}
commit_echoes(tty);
- return;
+ return 0;
}
if (c == '\n') {
if (L_ECHO(tty) || L_ECHONL(tty)) {
@@ -1366,7 +1367,7 @@ handle_newline:
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
- return;
+ return 0;
}
}
@@ -1388,43 +1389,36 @@ handle_newline:
put_tty_queue(c, ldata);
put_tty_queue(c, ldata);
+ return 0;
}
-static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+static inline void
+n_tty_receive_char_inline(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
int parmrk;
- /*
- * If the previous character was LNEXT, or we know that this
- * character is not one of the characters that we'll have to
- * handle specially, do shortcut processing to speed things
- * up.
- */
- if (!test_bit(c, ldata->char_map) || ldata->lnext) {
- ldata->lnext = 0;
-
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
- if (L_ECHO(tty)) {
- finish_erasing(ldata);
- /* Record the column of first canon char. */
- if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(ldata);
- echo_char(c, tty);
- commit_echoes(tty);
- }
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (parmrk)
- put_tty_queue(c, ldata);
- put_tty_queue(c, ldata);
- return;
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
}
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
+ if (parmrk)
+ put_tty_queue(c, ldata);
+ put_tty_queue(c, ldata);
+}
- n_tty_receive_char_special(tty, c);
+static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+{
+ n_tty_receive_char_inline(tty, c);
}
static inline void
@@ -1432,33 +1426,19 @@ n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
- /*
- * If the previous character was LNEXT, or we know that this
- * character is not one of the characters that we'll have to
- * handle specially, do shortcut processing to speed things
- * up.
- */
- if (!test_bit(c, ldata->char_map) || ldata->lnext) {
- ldata->lnext = 0;
-
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
- if (L_ECHO(tty)) {
- finish_erasing(ldata);
- /* Record the column of first canon char. */
- if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(ldata);
- echo_char(c, tty);
- commit_echoes(tty);
- }
- put_tty_queue(c, ldata);
- return;
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
}
-
- n_tty_receive_char_special(tty, c);
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ put_tty_queue(c, ldata);
}
static inline void
@@ -1505,6 +1485,22 @@ n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag)
}
}
+static void
+n_tty_receive_char_lnext(struct tty_struct *tty, unsigned char c, char flag)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+
+ ldata->lnext = 0;
+ if (likely(flag == TTY_NORMAL)) {
+ if (I_ISTRIP(tty))
+ c &= 0x7f;
+ if (I_IUCLC(tty) && L_IEXTEN(tty))
+ c = tolower(c);
+ n_tty_receive_char(tty, c);
+ } else
+ n_tty_receive_char_flagged(tty, c, flag);
+}
+
/**
* n_tty_receive_buf - data receive
* @tty: terminal device
@@ -1581,6 +1577,7 @@ static void
n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ struct n_tty_data *ldata = tty->disc_data;
char flag = TTY_NORMAL;
while (count--) {
@@ -1597,7 +1594,14 @@ n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp,
put_tty_queue(c, ldata);
continue;
}
- n_tty_receive_char(tty, c);
+ if (!test_bit(c, ldata->char_map))
+ n_tty_receive_char_inline(tty, c);
+ else if (n_tty_receive_char_special(tty, c) && count) {
+ if (fp)
+ flag = *fp++;
+ n_tty_receive_char_lnext(tty, *cp++, flag);
+ count--;
+ }
} else
n_tty_receive_char_flagged(tty, *cp++, flag);
}
@@ -1607,14 +1611,24 @@ static void
n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ struct n_tty_data *ldata = tty->disc_data;
char flag = TTY_NORMAL;
while (count--) {
if (fp)
flag = *fp++;
- if (likely(flag == TTY_NORMAL))
- n_tty_receive_char_fast(tty, *cp++);
- else
+ if (likely(flag == TTY_NORMAL)) {
+ unsigned char c = *cp++;
+
+ if (!test_bit(c, ldata->char_map))
+ n_tty_receive_char_fast(tty, c);
+ else if (n_tty_receive_char_special(tty, c) && count) {
+ if (fp)
+ flag = *fp++;
+ n_tty_receive_char_lnext(tty, *cp++, flag);
+ count--;
+ }
+ } else
n_tty_receive_char_flagged(tty, *cp++, flag);
}
}
@@ -1632,6 +1646,15 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
+ if (ldata->lnext) {
+ char flag = TTY_NORMAL;
+
+ if (fp)
+ flag = *fp++;
+ n_tty_receive_char_lnext(tty, *cp++, flag);
+ count--;
+ }
+
if (!preops && !I_PARMRK(tty))
n_tty_receive_buf_fast(tty, cp, fp, count);
else
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 20/20] tty: Remove extra wakeup from pty write() path
2013-04-15 15:32 ` [PATCH 00/20] streamline per-char receiving Peter Hurley
` (18 preceding siblings ...)
2013-04-15 15:32 ` [PATCH 19/20] n_tty: Factor LNEXT processing from per-char i/o path Peter Hurley
@ 2013-04-15 15:32 ` Peter Hurley
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-15 15:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Acquiring the write_wait queue spin lock now accounts for the largest
slice of cpu time on the tty write path. Two factors contribute to
this situation; a overly-pessimistic line discipline write loop which
_always_ sets up a wait loop even if i/o will immediately succeed, and
on ptys, a wakeup storm from reads and writes.
Writer wakeup does not need to be performed by the pty driver.
Firstly, since the actual i/o is performed within the write, the
line discipline write loop will continue while space remains in
the flip buffers. Secondly, when space becomes avail in the
line discipline receive buffer (and thus also in the flip buffers),
the pty unthrottle re-wakes the writer (non-flow-controlled line
disciplines unconditionally unthrottle the driver when data is
received). Thus, existing in-kernel i/o is guaranteed to advance.
Finally, writer wakeup occurs at the conclusion of the line discipline
write (in tty_write_unlock()). This guarantees that any user-space write
waiters are woken to continue additional i/o.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/pty.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index ca1472b..9c2f1bc 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -121,10 +121,8 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to->port, buf, c);
/* And shovel */
- if (c) {
+ if (c)
tty_flip_buffer_push(to->port);
- tty_wakeup(tty);
- }
}
return c;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread
* Re: [PATCH v3 00/24] lockless n_tty receive path
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (24 preceding siblings ...)
2013-04-15 15:25 ` [PATCH 00/16] lockless tty flip buffers Peter Hurley
@ 2013-04-15 20:14 ` Greg Kroah-Hartman
2013-04-16 10:15 ` [PATCH 1/7] tty: Add timed, writer-prioritized rw semaphore Peter Hurley
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
26 siblings, 1 reply; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-04-15 20:14 UTC (permalink / raw)
To: Peter Hurley; +Cc: linux-serial, linux-kernel, Jiri Slaby
On Mon, Apr 15, 2013 at 11:19:04AM -0400, Peter Hurley wrote:
> Greg,
>
> Unfortunately, this series is dependent on the 'ldsem patchset'.
> The reason is that this series abandons tty->receive_room as
> a flow control mechanism (because that requires locking),
> and the TIOCSETD ioctl _without ldsem_ uses tty->receive_room
> to shutoff i/o.
Can you also resend the ldsem patch series, as I no longer have it
around anymore, and I don't think it was part of this big resend, right?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread* [PATCH 1/7] tty: Add timed, writer-prioritized rw semaphore
2013-04-15 20:14 ` [PATCH v3 00/24] lockless n_tty receive path Greg Kroah-Hartman
@ 2013-04-16 10:15 ` Peter Hurley
2013-04-16 10:15 ` [PATCH 2/7] tty: Add lock/unlock ldisc pair functions Peter Hurley
` (5 more replies)
0 siblings, 6 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-16 10:15 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
The semantics of a rw semaphore are almost ideally suited
for tty line discipline lifetime management; multiple active
threads obtain "references" (read locks) while performing i/o
to prevent the loss or change of the current line discipline
(write lock).
Unfortunately, the existing rw_semaphore is ill-suited in other
ways;
1) TIOCSETD ioctl (change line discipline) expects to return an
error if the line discipline cannot be exclusively locked within
5 secs. Lock wait timeouts are not supported by rwsem.
2) A tty hangup is expected to halt and scrap pending i/o, so
exclusive locking must be prioritized.
Writer priority is not supported by rwsem.
Add ld_semaphore which implements these requirements in a
semantically similar way to rw_semaphore.
Writer priority is handled by separate wait lists for readers and
writers. Pending write waits are priortized before existing read
waits and prevent further read locks.
Wait timeouts are trivially added, but obviously change the lock
semantics as lock attempts can fail (but only due to timeout).
This implementation incorporates the write-lock stealing work of
Michel Lespinasse <walken@google.com>.
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/Makefile | 2 +-
drivers/tty/tty_ldsem.c | 453 ++++++++++++++++++++++++++++++++++++++++++++++
include/linux/tty_ldisc.h | 46 +++++
3 files changed, 500 insertions(+), 1 deletion(-)
create mode 100644 drivers/tty/tty_ldsem.c
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 6b78399..58ad1c0 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \
- tty_buffer.o tty_port.o tty_mutex.o
+ tty_buffer.o tty_port.o tty_mutex.o tty_ldsem.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
obj-$(CONFIG_AUDIT) += tty_audit.o
diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c
new file mode 100644
index 0000000..22fad8a
--- /dev/null
+++ b/drivers/tty/tty_ldsem.c
@@ -0,0 +1,453 @@
+/*
+ * Ldisc rw semaphore
+ *
+ * The ldisc semaphore is semantically a rw_semaphore but which enforces
+ * an alternate policy, namely:
+ * 1) Supports lock wait timeouts
+ * 2) Write waiter has priority
+ * 3) Downgrading is not supported
+ *
+ * Implementation notes:
+ * 1) Upper half of semaphore count is a wait count (differs from rwsem
+ * in that rwsem normalizes the upper half to the wait bias)
+ * 2) Lacks overflow checking
+ *
+ * The generic counting was copied and modified from include/asm-generic/rwsem.h
+ * by Paul Mackerras <paulus@samba.org>.
+ *
+ * The scheduling policy was copied and modified from lib/rwsem.c
+ * Written by David Howells (dhowells@redhat.com).
+ *
+ * This implementation incorporates the write lock stealing work of
+ * Michel Lespinasse <walken@google.com>.
+ *
+ * Copyright (C) 2013 Peter Hurley <peter@hurleysoftware.com>
+ *
+ * This file may be redistributed under the terms of the GNU General Public
+ * License v2.
+ */
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+#include <linux/tty.h>
+#include <linux/sched.h>
+
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __acq(l, s, t, r, c, n, i) \
+ lock_acquire(&(l)->dep_map, s, t, r, c, n, i)
+# define __rel(l, n, i) \
+ lock_release(&(l)->dep_map, n, i)
+# ifdef CONFIG_PROVE_LOCKING
+# define lockdep_acquire(l, s, t, i) __acq(l, s, t, 0, 2, NULL, i)
+# define lockdep_acquire_nest(l, s, t, n, i) __acq(l, s, t, 0, 2, n, i)
+# define lockdep_acquire_read(l, s, t, i) __acq(l, s, t, 1, 2, NULL, i)
+# define lockdep_release(l, n, i) __rel(l, n, i)
+# else
+# define lockdep_acquire(l, s, t, i) __acq(l, s, t, 0, 1, NULL, i)
+# define lockdep_acquire_nest(l, s, t, n, i) __acq(l, s, t, 0, 1, n, i)
+# define lockdep_acquire_read(l, s, t, i) __acq(l, s, t, 1, 1, NULL, i)
+# define lockdep_release(l, n, i) __rel(l, n, i)
+# endif
+#else
+# define lockdep_acquire(l, s, t, i) do { } while (0)
+# define lockdep_acquire_nest(l, s, t, n, i) do { } while (0)
+# define lockdep_acquire_read(l, s, t, i) do { } while (0)
+# define lockdep_release(l, n, i) do { } while (0)
+#endif
+
+#ifdef CONFIG_LOCK_STAT
+# define lock_stat(_lock, stat) lock_##stat(&(_lock)->dep_map, _RET_IP_)
+#else
+# define lock_stat(_lock, stat) do { } while (0)
+#endif
+
+
+#if BITS_PER_LONG == 64
+# define LDSEM_ACTIVE_MASK 0xffffffffL
+#else
+# define LDSEM_ACTIVE_MASK 0x0000ffffL
+#endif
+
+#define LDSEM_UNLOCKED 0L
+#define LDSEM_ACTIVE_BIAS 1L
+#define LDSEM_WAIT_BIAS (-LDSEM_ACTIVE_MASK-1)
+#define LDSEM_READ_BIAS LDSEM_ACTIVE_BIAS
+#define LDSEM_WRITE_BIAS (LDSEM_WAIT_BIAS + LDSEM_ACTIVE_BIAS)
+
+struct ldsem_waiter {
+ struct list_head list;
+ struct task_struct *task;
+};
+
+static inline long ldsem_atomic_update(long delta, struct ld_semaphore *sem)
+{
+ return atomic_long_add_return(delta, (atomic_long_t *)&sem->count);
+}
+
+static inline int ldsem_cmpxchg(long *old, long new, struct ld_semaphore *sem)
+{
+ long tmp = *old;
+ *old = atomic_long_cmpxchg(&sem->count, *old, new);
+ return *old == tmp;
+}
+
+/*
+ * Initialize an ldsem:
+ */
+void __init_ldsem(struct ld_semaphore *sem, const char *name,
+ struct lock_class_key *key)
+{
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ /*
+ * Make sure we are not reinitializing a held semaphore:
+ */
+ debug_check_no_locks_freed((void *)sem, sizeof(*sem));
+ lockdep_init_map(&sem->dep_map, name, key, 0);
+#endif
+ sem->count = LDSEM_UNLOCKED;
+ sem->wait_readers = 0;
+ raw_spin_lock_init(&sem->wait_lock);
+ INIT_LIST_HEAD(&sem->read_wait);
+ INIT_LIST_HEAD(&sem->write_wait);
+}
+
+static void __ldsem_wake_readers(struct ld_semaphore *sem)
+{
+ struct ldsem_waiter *waiter, *next;
+ struct task_struct *tsk;
+ long adjust, count;
+
+ /* Try to grant read locks to all readers on the read wait list.
+ * Note the 'active part' of the count is incremented by
+ * the number of readers before waking any processes up.
+ */
+ adjust = sem->wait_readers * (LDSEM_ACTIVE_BIAS - LDSEM_WAIT_BIAS);
+ count = ldsem_atomic_update(adjust, sem);
+ do {
+ if (count > 0)
+ break;
+ if (ldsem_cmpxchg(&count, count - adjust, sem))
+ return;
+ } while (1);
+
+ list_for_each_entry_safe(waiter, next, &sem->read_wait, list) {
+ tsk = waiter->task;
+ smp_mb();
+ waiter->task = NULL;
+ wake_up_process(tsk);
+ put_task_struct(tsk);
+ }
+ INIT_LIST_HEAD(&sem->read_wait);
+ sem->wait_readers = 0;
+}
+
+static inline int writer_trylock(struct ld_semaphore *sem)
+{
+ /* only wake this writer if the active part of the count can be
+ * transitioned from 0 -> 1
+ */
+ long count = ldsem_atomic_update(LDSEM_ACTIVE_BIAS, sem);
+ do {
+ if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS)
+ return 1;
+ if (ldsem_cmpxchg(&count, count - LDSEM_ACTIVE_BIAS, sem))
+ return 0;
+ } while (1);
+}
+
+static void __ldsem_wake_writer(struct ld_semaphore *sem)
+{
+ struct ldsem_waiter *waiter;
+
+ waiter = list_entry(sem->write_wait.next, struct ldsem_waiter, list);
+ wake_up_process(waiter->task);
+}
+
+/*
+ * handle the lock release when processes blocked on it that can now run
+ * - if we come here from up_xxxx(), then:
+ * - the 'active part' of count (&0x0000ffff) reached 0 (but may have changed)
+ * - the 'waiting part' of count (&0xffff0000) is -ve (and will still be so)
+ * - the spinlock must be held by the caller
+ * - woken process blocks are discarded from the list after having task zeroed
+ */
+static void __ldsem_wake(struct ld_semaphore *sem)
+{
+ if (!list_empty(&sem->write_wait))
+ __ldsem_wake_writer(sem);
+ else if (!list_empty(&sem->read_wait))
+ __ldsem_wake_readers(sem);
+}
+
+static void ldsem_wake(struct ld_semaphore *sem)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&sem->wait_lock, flags);
+ __ldsem_wake(sem);
+ raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
+}
+
+/*
+ * wait for the read lock to be granted
+ */
+static struct ld_semaphore __sched *
+down_read_failed(struct ld_semaphore *sem, long count, long timeout)
+{
+ struct ldsem_waiter waiter;
+ struct task_struct *tsk = current;
+ long adjust = -LDSEM_ACTIVE_BIAS + LDSEM_WAIT_BIAS;
+
+ /* set up my own style of waitqueue */
+ raw_spin_lock_irq(&sem->wait_lock);
+
+ /* Try to reverse the lock attempt but if the count has changed
+ * so that reversing fails, check if there are are no waiters,
+ * and early-out if not */
+ do {
+ if (ldsem_cmpxchg(&count, count + adjust, sem))
+ break;
+ if (count > 0) {
+ raw_spin_unlock_irq(&sem->wait_lock);
+ return sem;
+ }
+ } while (1);
+
+ list_add_tail(&waiter.list, &sem->read_wait);
+ sem->wait_readers++;
+
+ waiter.task = tsk;
+ get_task_struct(tsk);
+
+ /* if there are no active locks, wake the new lock owner(s) */
+ if ((count & LDSEM_ACTIVE_MASK) == 0)
+ __ldsem_wake(sem);
+
+ raw_spin_unlock_irq(&sem->wait_lock);
+
+ /* wait to be given the lock */
+ for (;;) {
+ set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+
+ if (!waiter.task)
+ break;
+ if (!timeout)
+ break;
+ timeout = schedule_timeout(timeout);
+ }
+
+ __set_task_state(tsk, TASK_RUNNING);
+
+ if (!timeout) {
+ /* lock timed out but check if this task was just
+ * granted lock ownership - if so, pretend there
+ * was no timeout; otherwise, cleanup lock wait */
+ raw_spin_lock_irq(&sem->wait_lock);
+ if (waiter.task) {
+ ldsem_atomic_update(-LDSEM_WAIT_BIAS, sem);
+ list_del(&waiter.list);
+ raw_spin_unlock_irq(&sem->wait_lock);
+ put_task_struct(waiter.task);
+ return NULL;
+ }
+ raw_spin_unlock_irq(&sem->wait_lock);
+ }
+
+ return sem;
+}
+
+/*
+ * wait for the write lock to be granted
+ */
+static struct ld_semaphore __sched *
+down_write_failed(struct ld_semaphore *sem, long count, long timeout)
+{
+ struct ldsem_waiter waiter;
+ struct task_struct *tsk = current;
+ long adjust = -LDSEM_ACTIVE_BIAS;
+ int locked = 0;
+
+ /* set up my own style of waitqueue */
+ raw_spin_lock_irq(&sem->wait_lock);
+
+ /* Try to reverse the lock attempt but if the count has changed
+ * so that reversing fails, check if the lock is now owned,
+ * and early-out if so */
+ do {
+ if (ldsem_cmpxchg(&count, count + adjust, sem))
+ break;
+ if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS) {
+ raw_spin_unlock_irq(&sem->wait_lock);
+ return sem;
+ }
+ } while (1);
+
+ list_add_tail(&waiter.list, &sem->write_wait);
+
+ waiter.task = tsk;
+
+ set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+ for (;;) {
+ if (!timeout)
+ break;
+ raw_spin_unlock_irq(&sem->wait_lock);
+ timeout = schedule_timeout(timeout);
+ raw_spin_lock_irq(&sem->wait_lock);
+ set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+ if ((locked = writer_trylock(sem)))
+ break;
+ }
+
+ if (!locked)
+ ldsem_atomic_update(-LDSEM_WAIT_BIAS, sem);
+ list_del(&waiter.list);
+ raw_spin_unlock_irq(&sem->wait_lock);
+
+ __set_task_state(tsk, TASK_RUNNING);
+
+ /* lock wait may have timed out */
+ if (!locked)
+ return NULL;
+ return sem;
+}
+
+
+
+static inline int __ldsem_down_read_nested(struct ld_semaphore *sem,
+ int subclass, long timeout)
+{
+ long count;
+
+ lockdep_acquire_read(sem, subclass, 0, _RET_IP_);
+
+ count = ldsem_atomic_update(LDSEM_READ_BIAS, sem);
+ if (count <= 0) {
+ lock_stat(sem, contended);
+ if (!down_read_failed(sem, count, timeout)) {
+ lockdep_release(sem, 1, _RET_IP_);
+ return 0;
+ }
+ }
+ lock_stat(sem, acquired);
+ return 1;
+}
+
+static inline int __ldsem_down_write_nested(struct ld_semaphore *sem,
+ int subclass, long timeout)
+{
+ long count;
+
+ lockdep_acquire(sem, subclass, 0, _RET_IP_);
+
+ count = ldsem_atomic_update(LDSEM_WRITE_BIAS, sem);
+ if ((count & LDSEM_ACTIVE_MASK) != LDSEM_ACTIVE_BIAS) {
+ lock_stat(sem, contended);
+ if (!down_write_failed(sem, count, timeout)) {
+ lockdep_release(sem, 1, _RET_IP_);
+ return 0;
+ }
+ }
+ lock_stat(sem, acquired);
+ return 1;
+}
+
+
+/*
+ * lock for reading -- returns 1 if successful, 0 if timed out
+ */
+int __sched ldsem_down_read(struct ld_semaphore *sem, long timeout)
+{
+ might_sleep();
+ return __ldsem_down_read_nested(sem, 0, timeout);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+int ldsem_down_read_trylock(struct ld_semaphore *sem)
+{
+ long count = sem->count;
+
+ while (count >= 0) {
+ if (ldsem_cmpxchg(&count, count + LDSEM_READ_BIAS, sem)) {
+ lockdep_acquire_read(sem, 0, 1, _RET_IP_);
+ lock_stat(sem, acquired);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * lock for writing -- returns 1 if successful, 0 if timed out
+ */
+int __sched ldsem_down_write(struct ld_semaphore *sem, long timeout)
+{
+ might_sleep();
+ return __ldsem_down_write_nested(sem, 0, timeout);
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+int ldsem_down_write_trylock(struct ld_semaphore *sem)
+{
+ long count = sem->count;
+
+ while ((count & LDSEM_ACTIVE_MASK) == 0) {
+ if (ldsem_cmpxchg(&count, count + LDSEM_WRITE_BIAS, sem)) {
+ lockdep_acquire(sem, 0, 1, _RET_IP_);
+ lock_stat(sem, acquired);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * release a read lock
+ */
+void ldsem_up_read(struct ld_semaphore *sem)
+{
+ long count;
+
+ lockdep_release(sem, 1, _RET_IP_);
+
+ count = ldsem_atomic_update(-LDSEM_READ_BIAS, sem);
+ if (count < 0 && (count & LDSEM_ACTIVE_MASK) == 0)
+ ldsem_wake(sem);
+}
+
+/*
+ * release a write lock
+ */
+void ldsem_up_write(struct ld_semaphore *sem)
+{
+ long count;
+
+ lockdep_release(sem, 1, _RET_IP_);
+
+ count = ldsem_atomic_update(-LDSEM_WRITE_BIAS, sem);
+ if (count < 0)
+ ldsem_wake(sem);
+}
+
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+
+int ldsem_down_read_nested(struct ld_semaphore *sem, int subclass, long timeout)
+{
+ might_sleep();
+ return __ldsem_down_read_nested(sem, subclass, timeout);
+}
+
+int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass,
+ long timeout)
+{
+ might_sleep();
+ return __ldsem_down_write_nested(sem, subclass, timeout);
+}
+
+#endif
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 455a0d7..ca000fc 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -110,6 +110,52 @@
#include <linux/wait.h>
#include <linux/wait.h>
+
+/*
+ * the semaphore definition
+ */
+struct ld_semaphore {
+ long count;
+ raw_spinlock_t wait_lock;
+ unsigned int wait_readers;
+ struct list_head read_wait;
+ struct list_head write_wait;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ struct lockdep_map dep_map;
+#endif
+};
+
+extern void __init_ldsem(struct ld_semaphore *sem, const char *name,
+ struct lock_class_key *key);
+
+#define init_ldsem(sem) \
+do { \
+ static struct lock_class_key __key; \
+ \
+ __init_ldsem((sem), #sem, &__key); \
+} while (0)
+
+
+extern int ldsem_down_read(struct ld_semaphore *sem, long timeout);
+extern int ldsem_down_read_trylock(struct ld_semaphore *sem);
+extern int ldsem_down_write(struct ld_semaphore *sem, long timeout);
+extern int ldsem_down_write_trylock(struct ld_semaphore *sem);
+extern void ldsem_up_read(struct ld_semaphore *sem);
+extern void ldsem_up_write(struct ld_semaphore *sem);
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+extern int ldsem_down_read_nested(struct ld_semaphore *sem, int subclass,
+ long timeout);
+extern int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass,
+ long timeout);
+#else
+# define ldsem_down_read_nested(sem, subclass, timeout) \
+ ldsem_down_read(sem, timeout)
+# define ldsem_down_write_nested(sem, subclass, timeout) \
+ ldsem_down_write(sem, timeout)
+#endif
+
+
struct tty_ldisc_ops {
int magic;
char *name;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 2/7] tty: Add lock/unlock ldisc pair functions
2013-04-16 10:15 ` [PATCH 1/7] tty: Add timed, writer-prioritized rw semaphore Peter Hurley
@ 2013-04-16 10:15 ` Peter Hurley
2013-05-20 19:34 ` Greg Kroah-Hartman
2013-04-16 10:15 ` [PATCH 3/7] tty: Replace ldisc locking with ldisc_sem Peter Hurley
` (4 subsequent siblings)
5 siblings, 1 reply; 238+ messages in thread
From: Peter Hurley @ 2013-04-16 10:15 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Just as the tty pair must be locked in a stable sequence
(ie, independent of which is consider the 'other' tty), so must
the ldisc pair be locked in a stable sequence as well.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_ldisc.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 1afe192..ae0287f 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -31,6 +31,13 @@
#define tty_ldisc_debug(tty, f, args...)
#endif
+/* lockdep nested classes for tty->ldisc_sem */
+enum {
+ LDISC_SEM_NORMAL,
+ LDISC_SEM_OTHER,
+};
+
+
/*
* This guards the refcounted line discipline lists. The lock
* must be taken with irqs off because there are hangup path
@@ -351,6 +358,86 @@ void tty_ldisc_deref(struct tty_ldisc *ld)
}
EXPORT_SYMBOL_GPL(tty_ldisc_deref);
+
+static inline int __lockfunc
+tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
+{
+ return ldsem_down_write(&tty->ldisc_sem, timeout);
+}
+
+static inline int __lockfunc
+tty_ldisc_lock_nested(struct tty_struct *tty, unsigned long timeout)
+{
+ return ldsem_down_write_nested(&tty->ldisc_sem,
+ LDISC_SEM_OTHER, timeout);
+}
+
+static inline void tty_ldisc_unlock(struct tty_struct *tty)
+{
+ return ldsem_up_write(&tty->ldisc_sem);
+}
+
+static int __lockfunc
+tty_ldisc_lock_pair_timeout(struct tty_struct *tty, struct tty_struct *tty2,
+ unsigned long timeout)
+{
+ int ret;
+
+ if (tty < tty2) {
+ ret = tty_ldisc_lock(tty, timeout);
+ if (ret) {
+ ret = tty_ldisc_lock_nested(tty2, timeout);
+ if (!ret)
+ tty_ldisc_unlock(tty);
+ }
+ } else {
+ /* if this is possible, it has lots of implications */
+ WARN_ON_ONCE(tty == tty2);
+ if (tty2 && tty != tty2) {
+ ret = tty_ldisc_lock(tty2, timeout);
+ if (ret) {
+ ret = tty_ldisc_lock_nested(tty, timeout);
+ if (!ret)
+ tty_ldisc_unlock(tty2);
+ }
+ } else
+ ret = tty_ldisc_lock(tty, timeout);
+ }
+
+ if (!ret)
+ return -EBUSY;
+
+ set_bit(TTY_LDISC_HALTED, &tty->flags);
+ if (tty2)
+ set_bit(TTY_LDISC_HALTED, &tty2->flags);
+ return 0;
+}
+
+static void __lockfunc
+tty_ldisc_lock_pair(struct tty_struct *tty, struct tty_struct *tty2)
+{
+ tty_ldisc_lock_pair_timeout(tty, tty2, MAX_SCHEDULE_TIMEOUT);
+}
+
+static void __lockfunc tty_ldisc_unlock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2)
+{
+ tty_ldisc_unlock(tty);
+ if (tty2)
+ tty_ldisc_unlock(tty2);
+}
+
+static void __lockfunc tty_ldisc_enable_pair(struct tty_struct *tty,
+ struct tty_struct *tty2)
+{
+ clear_bit(TTY_LDISC_HALTED, &tty->flags);
+ if (tty2)
+ clear_bit(TTY_LDISC_HALTED, &tty2->flags);
+
+ tty_ldisc_unlock_pair(tty, tty2);
+}
+
+
/**
* tty_ldisc_enable - allow ldisc use
* @tty: terminal to activate ldisc on
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* Re: [PATCH 2/7] tty: Add lock/unlock ldisc pair functions
2013-04-16 10:15 ` [PATCH 2/7] tty: Add lock/unlock ldisc pair functions Peter Hurley
@ 2013-05-20 19:34 ` Greg Kroah-Hartman
2013-05-20 21:44 ` Peter Hurley
0 siblings, 1 reply; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-05-20 19:34 UTC (permalink / raw)
To: Peter Hurley; +Cc: Jiri Slaby, linux-serial, linux-kernel
On Tue, Apr 16, 2013 at 06:15:51AM -0400, Peter Hurley wrote:
> Just as the tty pair must be locked in a stable sequence
> (ie, independent of which is consider the 'other' tty), so must
> the ldisc pair be locked in a stable sequence as well.
>
> Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
> ---
> drivers/tty/tty_ldisc.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 87 insertions(+)
This patch breaks the build :(
I've taken the first one, care to mush this one with the 7/7 patch, so
there are no build breaks, and resend the 5 resulting patches so I can
apply these?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread
* Re: [PATCH 2/7] tty: Add lock/unlock ldisc pair functions
2013-05-20 19:34 ` Greg Kroah-Hartman
@ 2013-05-20 21:44 ` Peter Hurley
2013-05-20 23:06 ` Greg Kroah-Hartman
0 siblings, 1 reply; 238+ messages in thread
From: Peter Hurley @ 2013-05-20 21:44 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel
On 05/20/2013 03:34 PM, Greg Kroah-Hartman wrote:
> On Tue, Apr 16, 2013 at 06:15:51AM -0400, Peter Hurley wrote:
>> Just as the tty pair must be locked in a stable sequence
>> (ie, independent of which is consider the 'other' tty), so must
>> the ldisc pair be locked in a stable sequence as well.
>>
>> Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
>> ---
>> drivers/tty/tty_ldisc.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 87 insertions(+)
>
> This patch breaks the build :(
Sorry about that.
> I've taken the first one, care to mush this one with the 7/7 patch, so
> there are no build breaks, and resend the 5 resulting patches so I can
> apply these?
Maybe it would be better to reorder 7/7 to be 1/6, if that's ok?
More work for me but the history will be cleaner.
Regards,
Peter
^ permalink raw reply [flat|nested] 238+ messages in thread
* Re: [PATCH 2/7] tty: Add lock/unlock ldisc pair functions
2013-05-20 21:44 ` Peter Hurley
@ 2013-05-20 23:06 ` Greg Kroah-Hartman
2013-05-20 23:38 ` Peter Hurley
0 siblings, 1 reply; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-05-20 23:06 UTC (permalink / raw)
To: Peter Hurley; +Cc: Jiri Slaby, linux-serial, linux-kernel
On Mon, May 20, 2013 at 05:44:00PM -0400, Peter Hurley wrote:
> On 05/20/2013 03:34 PM, Greg Kroah-Hartman wrote:
> >On Tue, Apr 16, 2013 at 06:15:51AM -0400, Peter Hurley wrote:
> >>Just as the tty pair must be locked in a stable sequence
> >>(ie, independent of which is consider the 'other' tty), so must
> >>the ldisc pair be locked in a stable sequence as well.
> >>
> >>Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
> >>---
> >> drivers/tty/tty_ldisc.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++
> >> 1 file changed, 87 insertions(+)
> >
> >This patch breaks the build :(
>
> Sorry about that.
>
> >I've taken the first one, care to mush this one with the 7/7 patch, so
> >there are no build breaks, and resend the 5 resulting patches so I can
> >apply these?
>
> Maybe it would be better to reorder 7/7 to be 1/6, if that's ok?
> More work for me but the history will be cleaner.
Sure, that works for me as well, care to just resend them? Or, I can
dig them out of my archive if needed.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread
* Re: [PATCH 2/7] tty: Add lock/unlock ldisc pair functions
2013-05-20 23:06 ` Greg Kroah-Hartman
@ 2013-05-20 23:38 ` Peter Hurley
2013-06-03 19:24 ` Greg Kroah-Hartman
0 siblings, 1 reply; 238+ messages in thread
From: Peter Hurley @ 2013-05-20 23:38 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel
On 05/20/2013 07:06 PM, Greg Kroah-Hartman wrote:
> On Mon, May 20, 2013 at 05:44:00PM -0400, Peter Hurley wrote:
>> On 05/20/2013 03:34 PM, Greg Kroah-Hartman wrote:
>>> On Tue, Apr 16, 2013 at 06:15:51AM -0400, Peter Hurley wrote:
>>>> Just as the tty pair must be locked in a stable sequence
>>>> (ie, independent of which is consider the 'other' tty), so must
>>>> the ldisc pair be locked in a stable sequence as well.
>>>>
>>>> Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
>>>> ---
>>>> drivers/tty/tty_ldisc.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++
>>>> 1 file changed, 87 insertions(+)
>>>
>>> This patch breaks the build :(
>>
>> Sorry about that.
>>
>>> I've taken the first one, care to mush this one with the 7/7 patch, so
>>> there are no build breaks, and resend the 5 resulting patches so I can
>>> apply these?
>>
>> Maybe it would be better to reorder 7/7 to be 1/6, if that's ok?
>> More work for me but the history will be cleaner.
>
> Sure, that works for me as well, care to just resend them? Or, I can
> dig them out of my archive if needed.
I'll resend them because the rebase will require some re-editing.
Thanks,
Peter
^ permalink raw reply [flat|nested] 238+ messages in thread
* Re: [PATCH 2/7] tty: Add lock/unlock ldisc pair functions
2013-05-20 23:38 ` Peter Hurley
@ 2013-06-03 19:24 ` Greg Kroah-Hartman
2013-06-15 11:04 ` [PATCH 0/6] ldsem patchset, reordered and rebased Peter Hurley
0 siblings, 1 reply; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-06-03 19:24 UTC (permalink / raw)
To: Peter Hurley; +Cc: Jiri Slaby, linux-serial, linux-kernel
On Mon, May 20, 2013 at 07:38:57PM -0400, Peter Hurley wrote:
> On 05/20/2013 07:06 PM, Greg Kroah-Hartman wrote:
> >On Mon, May 20, 2013 at 05:44:00PM -0400, Peter Hurley wrote:
> >>On 05/20/2013 03:34 PM, Greg Kroah-Hartman wrote:
> >>>On Tue, Apr 16, 2013 at 06:15:51AM -0400, Peter Hurley wrote:
> >>>>Just as the tty pair must be locked in a stable sequence
> >>>>(ie, independent of which is consider the 'other' tty), so must
> >>>>the ldisc pair be locked in a stable sequence as well.
> >>>>
> >>>>Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
> >>>>---
> >>>> drivers/tty/tty_ldisc.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++
> >>>> 1 file changed, 87 insertions(+)
> >>>
> >>>This patch breaks the build :(
> >>
> >>Sorry about that.
> >>
> >>>I've taken the first one, care to mush this one with the 7/7 patch, so
> >>>there are no build breaks, and resend the 5 resulting patches so I can
> >>>apply these?
> >>
> >>Maybe it would be better to reorder 7/7 to be 1/6, if that's ok?
> >>More work for me but the history will be cleaner.
> >
> >Sure, that works for me as well, care to just resend them? Or, I can
> >dig them out of my archive if needed.
>
> I'll resend them because the rebase will require some re-editing.
Did you ever resend these? If so, I didn't see them :(
thanks,
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread
* [PATCH 0/6] ldsem patchset, reordered and rebased
2013-06-03 19:24 ` Greg Kroah-Hartman
@ 2013-06-15 11:04 ` Peter Hurley
2013-06-15 11:04 ` [PATCH 1/6] tty: Fix tty_ldisc_lock name collision Peter Hurley
` (6 more replies)
0 siblings, 7 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 11:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-kernel, linux-serial, Peter Hurley
On 06/03/2013 03:24 PM, Greg Kroah-Hartman wrote:> On Mon, May 20, 2013 at 07:38:57PM -0400, Peter Hurley wrote:
>> On 05/20/2013 07:06 PM, Greg Kroah-Hartman wrote:
>>> On Mon, May 20, 2013 at 05:44:00PM -0400, Peter Hurley wrote:
>>>> On 05/20/2013 03:34 PM, Greg Kroah-Hartman wrote:
>>>>> On Tue, Apr 16, 2013 at 06:15:51AM -0400, Peter Hurley wrote:
>>>>>> Just as the tty pair must be locked in a stable sequence
>>>>>> (ie, independent of which is consider the 'other' tty), so must
>>>>>> the ldisc pair be locked in a stable sequence as well.
>>>>>>
>>>>>> Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
>>>>>> ---
>>>>>> drivers/tty/tty_ldisc.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> 1 file changed, 87 insertions(+)
>>>>>
>>>>> This patch breaks the build :(
>>>>
>>>> Sorry about that.
>>>>
>>>>> I've taken the first one, care to mush this one with the 7/7 patch, so
>>>>> there are no build breaks, and resend the 5 resulting patches so I can
>>>>> apply these?
>>>>
>>>> Maybe it would be better to reorder 7/7 to be 1/6, if that's ok?
>>>> More work for me but the history will be cleaner.
>>>
>>> Sure, that works for me as well, care to just resend them? Or, I can
>>> dig them out of my archive if needed.
>>
>> I'll resend them because the rebase will require some re-editing.
>
> Did you ever resend these? If so, I didn't see them :(
Greg,
Sorry for the delay here. In addition to the re-editing required,
I merged in a couple of fixes and these needed re-testing.
These apply cleanly to tty-next.
Changes from previous 7-patch series:
1. In tty_ldisc_ref(), snapshot tty->ldisc holding ldsem.
The conditions for this to be a fix cannot actually occur but
this is better anyway.
2. In tty_set_ldisc(), the new ldisc needs to be released if
tty_ldisc_lock_pair_timeout() fails.
Regards,
Peter Hurley
Peter Hurley (6):
tty: Fix tty_ldisc_lock name collision
tty: Add lock/unlock ldisc pair functions
tty: Replace ldisc locking with ldisc_sem
tty: Clarify ldisc variable
tty: Fix hangup race with TIOCSETD ioctl
tty: Clarify multiple-references comment in TIOCSETD ioctl
drivers/tty/tty_buffer.c | 2 +-
drivers/tty/tty_io.c | 11 +-
drivers/tty/tty_ldisc.c | 450 ++++++++++++++++------------------------------
include/linux/tty.h | 4 +-
include/linux/tty_ldisc.h | 3 +-
5 files changed, 158 insertions(+), 312 deletions(-)
--
1.8.1.2
^ permalink raw reply [flat|nested] 238+ messages in thread* [PATCH 1/6] tty: Fix tty_ldisc_lock name collision
2013-06-15 11:04 ` [PATCH 0/6] ldsem patchset, reordered and rebased Peter Hurley
@ 2013-06-15 11:04 ` Peter Hurley
2013-06-15 11:04 ` [PATCH 2/6] tty: Add lock/unlock ldisc pair functions Peter Hurley
` (5 subsequent siblings)
6 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 11:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-kernel, linux-serial, Peter Hurley
The file scope spinlock identifier, tty_ldisc_lock, will collide
with the file scope lock function tty_ldisc_lock() so rename it.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_io.c | 4 ++--
drivers/tty/tty_ldisc.c | 46 +++++++++++++++++++++++-----------------------
2 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 6464029..e7be3a5 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -603,7 +603,7 @@ static int tty_signal_session_leader(struct tty_struct *tty, int exit_session)
* BTM
* redirect lock for undoing redirection
* file list lock for manipulating list of ttys
- * tty_ldisc_lock from called functions
+ * tty_ldiscs_lock from called functions
* termios_mutex resetting termios data
* tasklist_lock to walk task list for hangup event
* ->siglock to protect ->signal/->sighand
@@ -2199,7 +2199,7 @@ static int tty_fasync(int fd, struct file *filp, int on)
* FIXME: does not honour flow control ??
*
* Locking:
- * Called functions take tty_ldisc_lock
+ * Called functions take tty_ldiscs_lock
* current->signal->tty check is safe without locks
*
* FIXME: may race normal receive processing
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 1afe192..8166260 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -37,7 +37,7 @@
* callers who will do ldisc lookups and cannot sleep.
*/
-static DEFINE_RAW_SPINLOCK(tty_ldisc_lock);
+static DEFINE_RAW_SPINLOCK(tty_ldiscs_lock);
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
@@ -52,7 +52,7 @@ static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
* from this point onwards.
*
* Locking:
- * takes tty_ldisc_lock to guard against ldisc races
+ * takes tty_ldiscs_lock to guard against ldisc races
*/
int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc)
@@ -63,11 +63,11 @@ int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc)
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
tty_ldiscs[disc] = new_ldisc;
new_ldisc->num = disc;
new_ldisc->refcount = 0;
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
return ret;
}
@@ -82,7 +82,7 @@ EXPORT_SYMBOL(tty_register_ldisc);
* currently in use.
*
* Locking:
- * takes tty_ldisc_lock to guard against ldisc races
+ * takes tty_ldiscs_lock to guard against ldisc races
*/
int tty_unregister_ldisc(int disc)
@@ -93,12 +93,12 @@ int tty_unregister_ldisc(int disc)
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
if (tty_ldiscs[disc]->refcount)
ret = -EBUSY;
else
tty_ldiscs[disc] = NULL;
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
return ret;
}
@@ -109,7 +109,7 @@ static struct tty_ldisc_ops *get_ldops(int disc)
unsigned long flags;
struct tty_ldisc_ops *ldops, *ret;
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
ret = ERR_PTR(-EINVAL);
ldops = tty_ldiscs[disc];
if (ldops) {
@@ -119,7 +119,7 @@ static struct tty_ldisc_ops *get_ldops(int disc)
ret = ldops;
}
}
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
return ret;
}
@@ -127,10 +127,10 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
{
unsigned long flags;
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
ldops->refcount--;
module_put(ldops->owner);
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
}
/**
@@ -143,7 +143,7 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
* available
*
* Locking:
- * takes tty_ldisc_lock to guard against ldisc races
+ * takes tty_ldiscs_lock to guard against ldisc races
*/
static struct tty_ldisc *tty_ldisc_get(int disc)
@@ -191,7 +191,7 @@ static inline void tty_ldisc_put(struct tty_ldisc *ld)
if (WARN_ON_ONCE(!ld))
return;
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
/* unreleased reader reference(s) will cause this WARN */
WARN_ON(!atomic_dec_and_test(&ld->users));
@@ -199,7 +199,7 @@ static inline void tty_ldisc_put(struct tty_ldisc *ld)
ld->ops->refcount--;
module_put(ld->ops->owner);
kfree(ld);
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
}
static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
@@ -259,7 +259,7 @@ const struct file_operations tty_ldiscs_proc_fops = {
* used to implement both the waiting and non waiting versions
* of tty_ldisc_ref
*
- * Locking: takes tty_ldisc_lock
+ * Locking: takes tty_ldiscs_lock
*/
static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
@@ -268,13 +268,13 @@ static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
struct tty_ldisc *ld;
/* FIXME: this allows reference acquire after TTY_LDISC is cleared */
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
ld = NULL;
if (test_bit(TTY_LDISC, &tty->flags) && tty->ldisc) {
ld = tty->ldisc;
atomic_inc(&ld->users);
}
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
return ld;
}
@@ -291,7 +291,7 @@ static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
* against a discipline change, such as an existing ldisc reference
* (which we check for)
*
- * Locking: call functions take tty_ldisc_lock
+ * Locking: call functions take tty_ldiscs_lock
*/
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
@@ -312,7 +312,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
* reference to it. If the line discipline is in flux then
* return NULL. Can be called from IRQ and timer functions.
*
- * Locking: called functions take tty_ldisc_lock
+ * Locking: called functions take tty_ldiscs_lock
*/
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
@@ -328,7 +328,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref);
* Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May
* be called in IRQ context.
*
- * Locking: takes tty_ldisc_lock
+ * Locking: takes tty_ldiscs_lock
*/
void tty_ldisc_deref(struct tty_ldisc *ld)
@@ -338,13 +338,13 @@ void tty_ldisc_deref(struct tty_ldisc *ld)
if (WARN_ON_ONCE(!ld))
return;
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
/*
* WARNs if one-too-many reader references were released
* - the last reference must be released with tty_ldisc_put
*/
WARN_ON(atomic_dec_and_test(&ld->users));
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
if (waitqueue_active(&ld->wq_idle))
wake_up(&ld->wq_idle);
@@ -593,7 +593,7 @@ static bool tty_ldisc_hangup_halt(struct tty_struct *tty)
* overlapping ldisc change (including on the other end of pty pairs),
* the close of one side of a tty/pty pair, and eventually hangup.
*
- * Locking: takes tty_ldisc_lock, termios_mutex
+ * Locking: takes tty_ldiscs_lock, termios_mutex
*/
int tty_set_ldisc(struct tty_struct *tty, int ldisc)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 2/6] tty: Add lock/unlock ldisc pair functions
2013-06-15 11:04 ` [PATCH 0/6] ldsem patchset, reordered and rebased Peter Hurley
2013-06-15 11:04 ` [PATCH 1/6] tty: Fix tty_ldisc_lock name collision Peter Hurley
@ 2013-06-15 11:04 ` Peter Hurley
2013-06-15 11:04 ` [PATCH 3/6] tty: Replace ldisc locking with ldisc_sem Peter Hurley
` (4 subsequent siblings)
6 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 11:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-kernel, linux-serial, Peter Hurley
Just as the tty pair must be locked in a stable sequence
(ie, independent of which is consider the 'other' tty), so must
the ldisc pair be locked in a stable sequence as well.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_ldisc.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 8166260..418c9f6 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -31,6 +31,13 @@
#define tty_ldisc_debug(tty, f, args...)
#endif
+/* lockdep nested classes for tty->ldisc_sem */
+enum {
+ LDISC_SEM_NORMAL,
+ LDISC_SEM_OTHER,
+};
+
+
/*
* This guards the refcounted line discipline lists. The lock
* must be taken with irqs off because there are hangup path
@@ -351,6 +358,86 @@ void tty_ldisc_deref(struct tty_ldisc *ld)
}
EXPORT_SYMBOL_GPL(tty_ldisc_deref);
+
+static inline int __lockfunc
+tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
+{
+ return ldsem_down_write(&tty->ldisc_sem, timeout);
+}
+
+static inline int __lockfunc
+tty_ldisc_lock_nested(struct tty_struct *tty, unsigned long timeout)
+{
+ return ldsem_down_write_nested(&tty->ldisc_sem,
+ LDISC_SEM_OTHER, timeout);
+}
+
+static inline void tty_ldisc_unlock(struct tty_struct *tty)
+{
+ return ldsem_up_write(&tty->ldisc_sem);
+}
+
+static int __lockfunc
+tty_ldisc_lock_pair_timeout(struct tty_struct *tty, struct tty_struct *tty2,
+ unsigned long timeout)
+{
+ int ret;
+
+ if (tty < tty2) {
+ ret = tty_ldisc_lock(tty, timeout);
+ if (ret) {
+ ret = tty_ldisc_lock_nested(tty2, timeout);
+ if (!ret)
+ tty_ldisc_unlock(tty);
+ }
+ } else {
+ /* if this is possible, it has lots of implications */
+ WARN_ON_ONCE(tty == tty2);
+ if (tty2 && tty != tty2) {
+ ret = tty_ldisc_lock(tty2, timeout);
+ if (ret) {
+ ret = tty_ldisc_lock_nested(tty, timeout);
+ if (!ret)
+ tty_ldisc_unlock(tty2);
+ }
+ } else
+ ret = tty_ldisc_lock(tty, timeout);
+ }
+
+ if (!ret)
+ return -EBUSY;
+
+ set_bit(TTY_LDISC_HALTED, &tty->flags);
+ if (tty2)
+ set_bit(TTY_LDISC_HALTED, &tty2->flags);
+ return 0;
+}
+
+static void __lockfunc
+tty_ldisc_lock_pair(struct tty_struct *tty, struct tty_struct *tty2)
+{
+ tty_ldisc_lock_pair_timeout(tty, tty2, MAX_SCHEDULE_TIMEOUT);
+}
+
+static void __lockfunc tty_ldisc_unlock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2)
+{
+ tty_ldisc_unlock(tty);
+ if (tty2)
+ tty_ldisc_unlock(tty2);
+}
+
+static void __lockfunc tty_ldisc_enable_pair(struct tty_struct *tty,
+ struct tty_struct *tty2)
+{
+ clear_bit(TTY_LDISC_HALTED, &tty->flags);
+ if (tty2)
+ clear_bit(TTY_LDISC_HALTED, &tty2->flags);
+
+ tty_ldisc_unlock_pair(tty, tty2);
+}
+
+
/**
* tty_ldisc_enable - allow ldisc use
* @tty: terminal to activate ldisc on
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 3/6] tty: Replace ldisc locking with ldisc_sem
2013-06-15 11:04 ` [PATCH 0/6] ldsem patchset, reordered and rebased Peter Hurley
2013-06-15 11:04 ` [PATCH 1/6] tty: Fix tty_ldisc_lock name collision Peter Hurley
2013-06-15 11:04 ` [PATCH 2/6] tty: Add lock/unlock ldisc pair functions Peter Hurley
@ 2013-06-15 11:04 ` Peter Hurley
2013-06-15 11:04 ` [PATCH 4/6] tty: Clarify ldisc variable Peter Hurley
` (3 subsequent siblings)
6 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 11:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-kernel, linux-serial, Peter Hurley
Line discipline locking was performed with a combination of
a mutex, a status bit, a count, and a waitqueue -- basically,
a rw semaphore.
Replace the existing combination with an ld_semaphore.
Fixes:
1) the 'reference acquire after ldisc locked' bug
2) the over-complicated halt mechanism
3) lock order wrt. tty_lock()
4) dropping locks while changing ldisc
5) previously unidentified deadlock while locking ldisc from
both linked ttys concurrently
6) previously unidentified recursive deadlocks
Adds much-needed lockdep diagnostics.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 2 +-
drivers/tty/tty_io.c | 7 +-
drivers/tty/tty_ldisc.c | 329 +++++++---------------------------------------
include/linux/tty.h | 4 +-
include/linux/tty_ldisc.h | 3 +-
5 files changed, 52 insertions(+), 293 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 9121c1f..a42a028 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -429,7 +429,7 @@ static void flush_to_ldisc(struct work_struct *work)
return;
disc = tty_ldisc_ref(tty);
- if (disc == NULL) /* !TTY_LDISC */
+ if (disc == NULL)
return;
spin_lock_irqsave(&buf->lock, flags);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index e7be3a5..5ee51ba 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1388,8 +1388,7 @@ static int tty_reopen(struct tty_struct *tty)
struct tty_driver *driver = tty->driver;
if (test_bit(TTY_CLOSING, &tty->flags) ||
- test_bit(TTY_HUPPING, &tty->flags) ||
- test_bit(TTY_LDISC_CHANGING, &tty->flags))
+ test_bit(TTY_HUPPING, &tty->flags))
return -EIO;
if (driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -1405,7 +1404,7 @@ static int tty_reopen(struct tty_struct *tty)
}
tty->count++;
- WARN_ON(!test_bit(TTY_LDISC, &tty->flags));
+ WARN_ON(!tty->ldisc);
return 0;
}
@@ -3014,7 +3013,7 @@ void initialize_tty_struct(struct tty_struct *tty,
tty->pgrp = NULL;
mutex_init(&tty->legacy_mutex);
mutex_init(&tty->termios_mutex);
- mutex_init(&tty->ldisc_mutex);
+ init_ldsem(&tty->ldisc_sem);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
INIT_WORK(&tty->hangup_work, do_tty_hangup);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 418c9f6..a4fd3a1 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -45,7 +45,6 @@ enum {
*/
static DEFINE_RAW_SPINLOCK(tty_ldiscs_lock);
-static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
@@ -153,7 +152,7 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
* takes tty_ldiscs_lock to guard against ldisc races
*/
-static struct tty_ldisc *tty_ldisc_get(int disc)
+static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc)
{
struct tty_ldisc *ld;
struct tty_ldisc_ops *ldops;
@@ -180,8 +179,7 @@ static struct tty_ldisc *tty_ldisc_get(int disc)
}
ld->ops = ldops;
- atomic_set(&ld->users, 1);
- init_waitqueue_head(&ld->wq_idle);
+ ld->tty = tty;
return ld;
}
@@ -193,20 +191,11 @@ static struct tty_ldisc *tty_ldisc_get(int disc)
*/
static inline void tty_ldisc_put(struct tty_ldisc *ld)
{
- unsigned long flags;
-
if (WARN_ON_ONCE(!ld))
return;
- raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
-
- /* unreleased reader reference(s) will cause this WARN */
- WARN_ON(!atomic_dec_and_test(&ld->users));
-
- ld->ops->refcount--;
- module_put(ld->ops->owner);
+ put_ldops(ld->ops);
kfree(ld);
- raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
}
static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
@@ -258,34 +247,6 @@ const struct file_operations tty_ldiscs_proc_fops = {
};
/**
- * tty_ldisc_try - internal helper
- * @tty: the tty
- *
- * Make a single attempt to grab and bump the refcount on
- * the tty ldisc. Return 0 on failure or 1 on success. This is
- * used to implement both the waiting and non waiting versions
- * of tty_ldisc_ref
- *
- * Locking: takes tty_ldiscs_lock
- */
-
-static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
-{
- unsigned long flags;
- struct tty_ldisc *ld;
-
- /* FIXME: this allows reference acquire after TTY_LDISC is cleared */
- raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
- ld = NULL;
- if (test_bit(TTY_LDISC, &tty->flags) && tty->ldisc) {
- ld = tty->ldisc;
- atomic_inc(&ld->users);
- }
- raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
- return ld;
-}
-
-/**
* tty_ldisc_ref_wait - wait for the tty ldisc
* @tty: tty device
*
@@ -298,16 +259,15 @@ static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
* against a discipline change, such as an existing ldisc reference
* (which we check for)
*
- * Locking: call functions take tty_ldiscs_lock
+ * Note: only callable from a file_operations routine (which
+ * guarantees tty->ldisc != NULL when the lock is acquired).
*/
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
{
- struct tty_ldisc *ld;
-
- /* wait_event is a macro */
- wait_event(tty_ldisc_wait, (ld = tty_ldisc_try(tty)) != NULL);
- return ld;
+ ldsem_down_read(&tty->ldisc_sem, MAX_SCHEDULE_TIMEOUT);
+ WARN_ON(!tty->ldisc);
+ return tty->ldisc;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
@@ -318,13 +278,18 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
* Dereference the line discipline for the terminal and take a
* reference to it. If the line discipline is in flux then
* return NULL. Can be called from IRQ and timer functions.
- *
- * Locking: called functions take tty_ldiscs_lock
*/
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
{
- return tty_ldisc_try(tty);
+ struct tty_ldisc *ld = NULL;
+
+ if (ldsem_down_read_trylock(&tty->ldisc_sem)) {
+ ld = tty->ldisc;
+ if (!ld)
+ ldsem_up_read(&tty->ldisc_sem);
+ }
+ return ld;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref);
@@ -334,27 +299,11 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref);
*
* Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May
* be called in IRQ context.
- *
- * Locking: takes tty_ldiscs_lock
*/
void tty_ldisc_deref(struct tty_ldisc *ld)
{
- unsigned long flags;
-
- if (WARN_ON_ONCE(!ld))
- return;
-
- raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
- /*
- * WARNs if one-too-many reader references were released
- * - the last reference must be released with tty_ldisc_put
- */
- WARN_ON(atomic_dec_and_test(&ld->users));
- raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
-
- if (waitqueue_active(&ld->wq_idle))
- wake_up(&ld->wq_idle);
+ ldsem_up_read(&ld->tty->ldisc_sem);
}
EXPORT_SYMBOL_GPL(tty_ldisc_deref);
@@ -437,27 +386,6 @@ static void __lockfunc tty_ldisc_enable_pair(struct tty_struct *tty,
tty_ldisc_unlock_pair(tty, tty2);
}
-
-/**
- * tty_ldisc_enable - allow ldisc use
- * @tty: terminal to activate ldisc on
- *
- * Set the TTY_LDISC flag when the line discipline can be called
- * again. Do necessary wakeups for existing sleepers. Clear the LDISC
- * changing flag to indicate any ldisc change is now over.
- *
- * Note: nobody should set the TTY_LDISC bit except via this function.
- * Clearing directly is allowed.
- */
-
-static void tty_ldisc_enable(struct tty_struct *tty)
-{
- clear_bit(TTY_LDISC_HALTED, &tty->flags);
- set_bit(TTY_LDISC, &tty->flags);
- clear_bit(TTY_LDISC_CHANGING, &tty->flags);
- wake_up(&tty_ldisc_wait);
-}
-
/**
* tty_ldisc_flush - flush line discipline queue
* @tty: tty
@@ -555,14 +483,14 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
int r;
/* There is an outstanding reference here so this is safe */
- old = tty_ldisc_get(old->ops->num);
+ old = tty_ldisc_get(tty, old->ops->num);
WARN_ON(IS_ERR(old));
tty->ldisc = old;
tty_set_termios_ldisc(tty, old->ops->num);
if (tty_ldisc_open(tty, old) < 0) {
tty_ldisc_put(old);
/* This driver is always present */
- new_ldisc = tty_ldisc_get(N_TTY);
+ new_ldisc = tty_ldisc_get(tty, N_TTY);
if (IS_ERR(new_ldisc))
panic("n_tty: get");
tty->ldisc = new_ldisc;
@@ -576,101 +504,6 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
}
/**
- * tty_ldisc_wait_idle - wait for the ldisc to become idle
- * @tty: tty to wait for
- * @timeout: for how long to wait at most
- *
- * Wait for the line discipline to become idle. The discipline must
- * have been halted for this to guarantee it remains idle.
- */
-static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
-{
- long ret;
- ret = wait_event_timeout(tty->ldisc->wq_idle,
- atomic_read(&tty->ldisc->users) == 1, timeout);
- return ret > 0 ? 0 : -EBUSY;
-}
-
-/**
- * tty_ldisc_halt - shut down the line discipline
- * @tty: tty device
- * @o_tty: paired pty device (can be NULL)
- * @timeout: # of jiffies to wait for ldisc refs to be released
- *
- * Shut down the line discipline and work queue for this tty device and
- * its paired pty (if exists). Clearing the TTY_LDISC flag ensures
- * no further references can be obtained, while waiting for existing
- * references to be released ensures no more data is fed to the ldisc.
- *
- * You need to do a 'flush_scheduled_work()' (outside the ldisc_mutex)
- * in order to make sure any currently executing ldisc work is also
- * flushed.
- */
-
-static int tty_ldisc_halt(struct tty_struct *tty, struct tty_struct *o_tty,
- long timeout)
-{
- int retval;
-
- clear_bit(TTY_LDISC, &tty->flags);
- if (o_tty)
- clear_bit(TTY_LDISC, &o_tty->flags);
-
- retval = tty_ldisc_wait_idle(tty, timeout);
- if (!retval && o_tty)
- retval = tty_ldisc_wait_idle(o_tty, timeout);
- if (retval)
- return retval;
-
- set_bit(TTY_LDISC_HALTED, &tty->flags);
- if (o_tty)
- set_bit(TTY_LDISC_HALTED, &o_tty->flags);
-
- return 0;
-}
-
-/**
- * tty_ldisc_hangup_halt - halt the line discipline for hangup
- * @tty: tty being hung up
- *
- * Shut down the line discipline and work queue for the tty device
- * being hungup. Clear the TTY_LDISC flag to ensure no further
- * references can be obtained and wait for remaining references to be
- * released to ensure no more data is fed to this ldisc.
- * Caller must hold legacy and ->ldisc_mutex.
- *
- * NB: tty_set_ldisc() is prevented from changing the ldisc concurrently
- * with this function by checking the TTY_HUPPING flag.
- */
-static bool tty_ldisc_hangup_halt(struct tty_struct *tty)
-{
- char cur_n[TASK_COMM_LEN], tty_n[64];
- long timeout = 3 * HZ;
-
- clear_bit(TTY_LDISC, &tty->flags);
-
- if (tty->ldisc) { /* Not yet closed */
- tty_unlock(tty);
-
- while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
- timeout = MAX_SCHEDULE_TIMEOUT;
- printk_ratelimited(KERN_WARNING
- "%s: waiting (%s) for %s took too long, but we keep waiting...\n",
- __func__, get_task_comm(cur_n, current),
- tty_name(tty, tty_n));
- }
-
- set_bit(TTY_LDISC_HALTED, &tty->flags);
-
- /* must reacquire both locks and preserve lock order */
- mutex_unlock(&tty->ldisc_mutex);
- tty_lock(tty);
- mutex_lock(&tty->ldisc_mutex);
- }
- return !!tty->ldisc;
-}
-
-/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
* @ldisc: the line discipline
@@ -679,103 +512,47 @@ static bool tty_ldisc_hangup_halt(struct tty_struct *tty)
* context. The ldisc change logic has to protect itself against any
* overlapping ldisc change (including on the other end of pty pairs),
* the close of one side of a tty/pty pair, and eventually hangup.
- *
- * Locking: takes tty_ldiscs_lock, termios_mutex
*/
int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
int retval;
struct tty_ldisc *o_ldisc, *new_ldisc;
- struct tty_struct *o_tty;
+ struct tty_struct *o_tty = tty->link;
- new_ldisc = tty_ldisc_get(ldisc);
+ new_ldisc = tty_ldisc_get(tty, ldisc);
if (IS_ERR(new_ldisc))
return PTR_ERR(new_ldisc);
- tty_lock(tty);
- /*
- * We need to look at the tty locking here for pty/tty pairs
- * when both sides try to change in parallel.
- */
-
- o_tty = tty->link; /* o_tty is the pty side or NULL */
-
+ retval = tty_ldisc_lock_pair_timeout(tty, o_tty, 5 * HZ);
+ if (retval) {
+ tty_ldisc_put(new_ldisc);
+ return retval;
+ }
/*
* Check the no-op case
*/
if (tty->ldisc->ops->num == ldisc) {
- tty_unlock(tty);
+ tty_ldisc_enable_pair(tty, o_tty);
tty_ldisc_put(new_ldisc);
return 0;
}
- mutex_lock(&tty->ldisc_mutex);
-
- /*
- * We could be midstream of another ldisc change which has
- * dropped the lock during processing. If so we need to wait.
- */
-
- while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
- mutex_unlock(&tty->ldisc_mutex);
- tty_unlock(tty);
- wait_event(tty_ldisc_wait,
- test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
- tty_lock(tty);
- mutex_lock(&tty->ldisc_mutex);
- }
-
- set_bit(TTY_LDISC_CHANGING, &tty->flags);
-
- /*
- * No more input please, we are switching. The new ldisc
- * will update this value in the ldisc open function
- */
-
+ /* FIXME: why 'shutoff' input if the ldisc is locked? */
tty->receive_room = 0;
o_ldisc = tty->ldisc;
-
- tty_unlock(tty);
- /*
- * Make sure we don't change while someone holds a
- * reference to the line discipline. The TTY_LDISC bit
- * prevents anyone taking a reference once it is clear.
- * We need the lock to avoid racing reference takers.
- *
- * We must clear the TTY_LDISC bit here to avoid a livelock
- * with a userspace app continually trying to use the tty in
- * parallel to the change and re-referencing the tty.
- */
-
- retval = tty_ldisc_halt(tty, o_tty, 5 * HZ);
-
- /*
- * Wait for hangup to complete, if pending.
- * We must drop the mutex here in case a hangup is also in process.
- */
-
- mutex_unlock(&tty->ldisc_mutex);
-
- flush_work(&tty->hangup_work);
-
tty_lock(tty);
- mutex_lock(&tty->ldisc_mutex);
- /* handle wait idle failure locked */
- if (retval) {
- tty_ldisc_put(new_ldisc);
- goto enable;
- }
+ /* FIXME: for testing only */
+ WARN_ON(test_bit(TTY_HUPPED, &tty->flags));
if (test_bit(TTY_HUPPING, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
- clear_bit(TTY_LDISC_CHANGING, &tty->flags);
- mutex_unlock(&tty->ldisc_mutex);
+ tty_ldisc_enable_pair(tty, o_tty);
tty_ldisc_put(new_ldisc);
tty_unlock(tty);
return -EIO;
@@ -804,14 +581,10 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
tty_ldisc_put(o_ldisc);
-enable:
/*
* Allow ldisc referencing to occur again
*/
-
- tty_ldisc_enable(tty);
- if (o_tty)
- tty_ldisc_enable(o_tty);
+ tty_ldisc_enable_pair(tty, o_tty);
/* Restart the work queue in case no characters kick it off. Safe if
already running */
@@ -819,7 +592,6 @@ enable:
if (o_tty)
schedule_work(&o_tty->port->buf.work);
- mutex_unlock(&tty->ldisc_mutex);
tty_unlock(tty);
return retval;
}
@@ -852,7 +624,7 @@ static void tty_reset_termios(struct tty_struct *tty)
static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
{
- struct tty_ldisc *ld = tty_ldisc_get(ldisc);
+ struct tty_ldisc *ld = tty_ldisc_get(tty, ldisc);
if (IS_ERR(ld))
return -1;
@@ -891,14 +663,8 @@ void tty_ldisc_hangup(struct tty_struct *tty)
tty_ldisc_debug(tty, "closing ldisc: %p\n", tty->ldisc);
- /*
- * FIXME! What are the locking issues here? This may me overdoing
- * things... This question is especially important now that we've
- * removed the irqlock.
- */
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
- /* We may have no line discipline at this point */
if (ld->ops->flush_buffer)
ld->ops->flush_buffer(tty);
tty_driver_flush_buffer(tty);
@@ -909,21 +675,22 @@ void tty_ldisc_hangup(struct tty_struct *tty)
ld->ops->hangup(tty);
tty_ldisc_deref(ld);
}
- /*
- * FIXME: Once we trust the LDISC code better we can wait here for
- * ldisc completion and fix the driver call race
- */
+
wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
wake_up_interruptible_poll(&tty->read_wait, POLLIN);
+
+ tty_unlock(tty);
+
/*
* Shutdown the current line discipline, and reset it to
* N_TTY if need be.
*
* Avoid racing set_ldisc or tty_ldisc_release
*/
- mutex_lock(&tty->ldisc_mutex);
+ tty_ldisc_lock_pair(tty, tty->link);
+ tty_lock(tty);
- if (tty_ldisc_hangup_halt(tty)) {
+ if (tty->ldisc) {
/* At this point we have a halted ldisc; we want to close it and
reopen a new ldisc. We could defer the reopen to the next
@@ -942,9 +709,8 @@ void tty_ldisc_hangup(struct tty_struct *tty)
BUG_ON(tty_ldisc_reinit(tty, N_TTY));
WARN_ON(tty_ldisc_open(tty, tty->ldisc));
}
- tty_ldisc_enable(tty);
}
- mutex_unlock(&tty->ldisc_mutex);
+ tty_ldisc_enable_pair(tty, tty->link);
if (reset)
tty_reset_termios(tty);
@@ -976,15 +742,12 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
tty_ldisc_close(tty, ld);
return retval;
}
- tty_ldisc_enable(o_tty);
}
- tty_ldisc_enable(tty);
return 0;
}
static void tty_ldisc_kill(struct tty_struct *tty)
{
- mutex_lock(&tty->ldisc_mutex);
/*
* Now kill off the ldisc
*/
@@ -995,7 +758,6 @@ static void tty_ldisc_kill(struct tty_struct *tty)
/* Ensure the next open requests the N_TTY ldisc */
tty_set_termios_ldisc(tty, N_TTY);
- mutex_unlock(&tty->ldisc_mutex);
}
/**
@@ -1017,15 +779,16 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
tty_ldisc_debug(tty, "closing ldisc: %p\n", tty->ldisc);
- tty_ldisc_halt(tty, o_tty, MAX_SCHEDULE_TIMEOUT);
-
+ tty_ldisc_lock_pair(tty, o_tty);
tty_lock_pair(tty, o_tty);
- /* This will need doing differently if we need to lock */
+
tty_ldisc_kill(tty);
if (o_tty)
tty_ldisc_kill(o_tty);
tty_unlock_pair(tty, o_tty);
+ tty_ldisc_unlock_pair(tty, o_tty);
+
/* And the memory resources remaining (buffers, termios) will be
disposed of when the kref hits zero */
@@ -1042,7 +805,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
void tty_ldisc_init(struct tty_struct *tty)
{
- struct tty_ldisc *ld = tty_ldisc_get(N_TTY);
+ struct tty_ldisc *ld = tty_ldisc_get(tty, N_TTY);
if (IS_ERR(ld))
panic("n_tty: init_tty");
tty->ldisc = ld;
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 82ab69b..a665c7e 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -238,7 +238,7 @@ struct tty_struct {
int index;
/* Protects ldisc changes: Lock tty not pty */
- struct mutex ldisc_mutex;
+ struct ld_semaphore ldisc_sem;
struct tty_ldisc *ldisc;
struct mutex atomic_write_lock;
@@ -306,8 +306,6 @@ struct tty_file_private {
#define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */
#define TTY_PUSH 6 /* n_tty private */
#define TTY_CLOSING 7 /* ->close() in progress */
-#define TTY_LDISC 9 /* Line discipline attached */
-#define TTY_LDISC_CHANGING 10 /* Line discipline changing */
#define TTY_LDISC_OPEN 11 /* Line discipline is open */
#define TTY_PTY_LOCK 16 /* pty private */
#define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 7b24bbd..22ee107 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -197,8 +197,7 @@ struct tty_ldisc_ops {
struct tty_ldisc {
struct tty_ldisc_ops *ops;
- atomic_t users;
- wait_queue_head_t wq_idle;
+ struct tty_struct *tty;
};
#define TTY_LDISC_MAGIC 0x5403
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 4/6] tty: Clarify ldisc variable
2013-06-15 11:04 ` [PATCH 0/6] ldsem patchset, reordered and rebased Peter Hurley
` (2 preceding siblings ...)
2013-06-15 11:04 ` [PATCH 3/6] tty: Replace ldisc locking with ldisc_sem Peter Hurley
@ 2013-06-15 11:04 ` Peter Hurley
2013-06-15 11:04 ` [PATCH 5/6] tty: Fix hangup race with TIOCSETD ioctl Peter Hurley
` (2 subsequent siblings)
6 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 11:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-kernel, linux-serial, Peter Hurley
Rename o_ldisc to avoid confusion with the ldisc of the
'other' tty.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_ldisc.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index a4fd3a1..6c63b73 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -517,7 +517,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
int retval;
- struct tty_ldisc *o_ldisc, *new_ldisc;
+ struct tty_ldisc *old_ldisc, *new_ldisc;
struct tty_struct *o_tty = tty->link;
new_ldisc = tty_ldisc_get(tty, ldisc);
@@ -543,7 +543,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
/* FIXME: why 'shutoff' input if the ldisc is locked? */
tty->receive_room = 0;
- o_ldisc = tty->ldisc;
+ old_ldisc = tty->ldisc;
tty_lock(tty);
/* FIXME: for testing only */
@@ -558,8 +558,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
return -EIO;
}
- /* Shutdown the current discipline. */
- tty_ldisc_close(tty, o_ldisc);
+ /* Shutdown the old discipline. */
+ tty_ldisc_close(tty, old_ldisc);
/* Now set up the new line discipline. */
tty->ldisc = new_ldisc;
@@ -569,17 +569,17 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
if (retval < 0) {
/* Back to the old one or N_TTY if we can't */
tty_ldisc_put(new_ldisc);
- tty_ldisc_restore(tty, o_ldisc);
+ tty_ldisc_restore(tty, old_ldisc);
}
/* At this point we hold a reference to the new ldisc and a
a reference to the old ldisc. If we ended up flipping back
to the existing ldisc we have two references to it */
- if (tty->ldisc->ops->num != o_ldisc->ops->num && tty->ops->set_ldisc)
+ if (tty->ldisc->ops->num != old_ldisc->ops->num && tty->ops->set_ldisc)
tty->ops->set_ldisc(tty);
- tty_ldisc_put(o_ldisc);
+ tty_ldisc_put(old_ldisc);
/*
* Allow ldisc referencing to occur again
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 5/6] tty: Fix hangup race with TIOCSETD ioctl
2013-06-15 11:04 ` [PATCH 0/6] ldsem patchset, reordered and rebased Peter Hurley
` (3 preceding siblings ...)
2013-06-15 11:04 ` [PATCH 4/6] tty: Clarify ldisc variable Peter Hurley
@ 2013-06-15 11:04 ` Peter Hurley
2013-06-15 11:04 ` [PATCH 6/6] tty: Clarify multiple-references comment in " Peter Hurley
2013-07-23 23:44 ` [PATCH 0/6] ldsem patchset, reordered and rebased Greg Kroah-Hartman
6 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 11:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-kernel, linux-serial, Peter Hurley
The hangup may already have happened; check for that state also.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_ldisc.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 6c63b73..08b8a1b 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -546,10 +546,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
old_ldisc = tty->ldisc;
tty_lock(tty);
- /* FIXME: for testing only */
- WARN_ON(test_bit(TTY_HUPPED, &tty->flags));
-
- if (test_bit(TTY_HUPPING, &tty->flags)) {
+ if (test_bit(TTY_HUPPING, &tty->flags) ||
+ test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
tty_ldisc_enable_pair(tty, o_tty);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 6/6] tty: Clarify multiple-references comment in TIOCSETD ioctl
2013-06-15 11:04 ` [PATCH 0/6] ldsem patchset, reordered and rebased Peter Hurley
` (4 preceding siblings ...)
2013-06-15 11:04 ` [PATCH 5/6] tty: Fix hangup race with TIOCSETD ioctl Peter Hurley
@ 2013-06-15 11:04 ` Peter Hurley
2013-07-23 23:44 ` [PATCH 0/6] ldsem patchset, reordered and rebased Greg Kroah-Hartman
6 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 11:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-kernel, linux-serial, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_ldisc.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 08b8a1b..edeb1dd 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -570,13 +570,15 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
tty_ldisc_restore(tty, old_ldisc);
}
- /* At this point we hold a reference to the new ldisc and a
- a reference to the old ldisc. If we ended up flipping back
- to the existing ldisc we have two references to it */
-
if (tty->ldisc->ops->num != old_ldisc->ops->num && tty->ops->set_ldisc)
tty->ops->set_ldisc(tty);
+ /* At this point we hold a reference to the new ldisc and a
+ reference to the old ldisc, or we hold two references to
+ the old ldisc (if it was restored as part of error cleanup
+ above). In either case, releasing a single reference from
+ the old ldisc is correct. */
+
tty_ldisc_put(old_ldisc);
/*
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* Re: [PATCH 0/6] ldsem patchset, reordered and rebased
2013-06-15 11:04 ` [PATCH 0/6] ldsem patchset, reordered and rebased Peter Hurley
` (5 preceding siblings ...)
2013-06-15 11:04 ` [PATCH 6/6] tty: Clarify multiple-references comment in " Peter Hurley
@ 2013-07-23 23:44 ` Greg Kroah-Hartman
6 siblings, 0 replies; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-07-23 23:44 UTC (permalink / raw)
To: Peter Hurley; +Cc: Jiri Slaby, linux-kernel, linux-serial
On Sat, Jun 15, 2013 at 07:04:45AM -0400, Peter Hurley wrote:
> On 06/03/2013 03:24 PM, Greg Kroah-Hartman wrote:> On Mon, May 20, 2013 at 07:38:57PM -0400, Peter Hurley wrote:
> >> On 05/20/2013 07:06 PM, Greg Kroah-Hartman wrote:
> >>> On Mon, May 20, 2013 at 05:44:00PM -0400, Peter Hurley wrote:
> >>>> On 05/20/2013 03:34 PM, Greg Kroah-Hartman wrote:
> >>>>> On Tue, Apr 16, 2013 at 06:15:51AM -0400, Peter Hurley wrote:
> >>>>>> Just as the tty pair must be locked in a stable sequence
> >>>>>> (ie, independent of which is consider the 'other' tty), so must
> >>>>>> the ldisc pair be locked in a stable sequence as well.
> >>>>>>
> >>>>>> Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
> >>>>>> ---
> >>>>>> drivers/tty/tty_ldisc.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>>> 1 file changed, 87 insertions(+)
> >>>>>
> >>>>> This patch breaks the build :(
> >>>>
> >>>> Sorry about that.
> >>>>
> >>>>> I've taken the first one, care to mush this one with the 7/7 patch, so
> >>>>> there are no build breaks, and resend the 5 resulting patches so I can
> >>>>> apply these?
> >>>>
> >>>> Maybe it would be better to reorder 7/7 to be 1/6, if that's ok?
> >>>> More work for me but the history will be cleaner.
> >>>
> >>> Sure, that works for me as well, care to just resend them? Or, I can
> >>> dig them out of my archive if needed.
> >>
> >> I'll resend them because the rebase will require some re-editing.
> >
> > Did you ever resend these? If so, I didn't see them :(
>
> Greg,
>
> Sorry for the delay here. In addition to the re-editing required,
> I merged in a couple of fixes and these needed re-testing.
>
> These apply cleanly to tty-next.
>
> Changes from previous 7-patch series:
> 1. In tty_ldisc_ref(), snapshot tty->ldisc holding ldsem.
> The conditions for this to be a fix cannot actually occur but
> this is better anyway.
> 2. In tty_set_ldisc(), the new ldisc needs to be released if
> tty_ldisc_lock_pair_timeout() fails.
Now applied, thanks.
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread
* [PATCH 3/7] tty: Replace ldisc locking with ldisc_sem
2013-04-16 10:15 ` [PATCH 1/7] tty: Add timed, writer-prioritized rw semaphore Peter Hurley
2013-04-16 10:15 ` [PATCH 2/7] tty: Add lock/unlock ldisc pair functions Peter Hurley
@ 2013-04-16 10:15 ` Peter Hurley
2013-04-16 10:15 ` [PATCH 4/7] tty: Clarify ldisc variable Peter Hurley
` (3 subsequent siblings)
5 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-16 10:15 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Line discipline locking was performed with a combination of
a mutex, a status bit, a count, and a waitqueue -- basically,
a rw semaphore.
Replace the existing combination with an ld_semaphore.
Fixes:
1) the 'reference acquire after ldisc locked' bug
2) the over-complicated halt mechanism
3) lock order wrt. tty_lock()
4) dropping locks while changing ldisc
5) previously unidentified deadlock while locking ldisc from
both linked ttys concurrently
6) previously unidentified recursive deadlocks
Adds much-needed lockdep diagnostics.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 2 +-
drivers/tty/tty_io.c | 7 +-
drivers/tty/tty_ldisc.c | 324 ++++++----------------------------------------
include/linux/tty.h | 4 +-
include/linux/tty_ldisc.h | 3 +-
5 files changed, 48 insertions(+), 292 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 578aa75..8e8d730 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -429,7 +429,7 @@ static void flush_to_ldisc(struct work_struct *work)
return;
disc = tty_ldisc_ref(tty);
- if (disc == NULL) /* !TTY_LDISC */
+ if (disc == NULL)
return;
spin_lock_irqsave(&buf->lock, flags);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 2f77af4..06f0e25 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1326,8 +1326,7 @@ static int tty_reopen(struct tty_struct *tty)
struct tty_driver *driver = tty->driver;
if (test_bit(TTY_CLOSING, &tty->flags) ||
- test_bit(TTY_HUPPING, &tty->flags) ||
- test_bit(TTY_LDISC_CHANGING, &tty->flags))
+ test_bit(TTY_HUPPING, &tty->flags))
return -EIO;
if (driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -1343,7 +1342,7 @@ static int tty_reopen(struct tty_struct *tty)
}
tty->count++;
- WARN_ON(!test_bit(TTY_LDISC, &tty->flags));
+ WARN_ON(!tty->ldisc);
return 0;
}
@@ -2952,7 +2951,7 @@ void initialize_tty_struct(struct tty_struct *tty,
tty->pgrp = NULL;
mutex_init(&tty->legacy_mutex);
mutex_init(&tty->termios_mutex);
- mutex_init(&tty->ldisc_mutex);
+ init_ldsem(&tty->ldisc_sem);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
INIT_WORK(&tty->hangup_work, do_tty_hangup);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index ae0287f..a150f95 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -45,7 +45,6 @@ enum {
*/
static DEFINE_RAW_SPINLOCK(tty_ldisc_lock);
-static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
@@ -153,7 +152,7 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
* takes tty_ldisc_lock to guard against ldisc races
*/
-static struct tty_ldisc *tty_ldisc_get(int disc)
+static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc)
{
struct tty_ldisc *ld;
struct tty_ldisc_ops *ldops;
@@ -180,8 +179,7 @@ static struct tty_ldisc *tty_ldisc_get(int disc)
}
ld->ops = ldops;
- atomic_set(&ld->users, 1);
- init_waitqueue_head(&ld->wq_idle);
+ ld->tty = tty;
return ld;
}
@@ -193,20 +191,11 @@ static struct tty_ldisc *tty_ldisc_get(int disc)
*/
static inline void tty_ldisc_put(struct tty_ldisc *ld)
{
- unsigned long flags;
-
if (WARN_ON_ONCE(!ld))
return;
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
-
- /* unreleased reader reference(s) will cause this WARN */
- WARN_ON(!atomic_dec_and_test(&ld->users));
-
- ld->ops->refcount--;
- module_put(ld->ops->owner);
+ put_ldops(ld->ops);
kfree(ld);
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}
static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
@@ -258,34 +247,6 @@ const struct file_operations tty_ldiscs_proc_fops = {
};
/**
- * tty_ldisc_try - internal helper
- * @tty: the tty
- *
- * Make a single attempt to grab and bump the refcount on
- * the tty ldisc. Return 0 on failure or 1 on success. This is
- * used to implement both the waiting and non waiting versions
- * of tty_ldisc_ref
- *
- * Locking: takes tty_ldisc_lock
- */
-
-static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
-{
- unsigned long flags;
- struct tty_ldisc *ld;
-
- /* FIXME: this allows reference acquire after TTY_LDISC is cleared */
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
- ld = NULL;
- if (test_bit(TTY_LDISC, &tty->flags) && tty->ldisc) {
- ld = tty->ldisc;
- atomic_inc(&ld->users);
- }
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- return ld;
-}
-
-/**
* tty_ldisc_ref_wait - wait for the tty ldisc
* @tty: tty device
*
@@ -298,16 +259,15 @@ static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
* against a discipline change, such as an existing ldisc reference
* (which we check for)
*
- * Locking: call functions take tty_ldisc_lock
+ * Note: only callable from a file_operations routine (which
+ * guarantees tty->ldisc !- NULL when the lock is acquired).
*/
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
{
- struct tty_ldisc *ld;
-
- /* wait_event is a macro */
- wait_event(tty_ldisc_wait, (ld = tty_ldisc_try(tty)) != NULL);
- return ld;
+ ldsem_down_read(&tty->ldisc_sem, MAX_SCHEDULE_TIMEOUT);
+ WARN_ON(!tty->ldisc);
+ return tty->ldisc;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
@@ -318,13 +278,16 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
* Dereference the line discipline for the terminal and take a
* reference to it. If the line discipline is in flux then
* return NULL. Can be called from IRQ and timer functions.
- *
- * Locking: called functions take tty_ldisc_lock
*/
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
{
- return tty_ldisc_try(tty);
+ if (ldsem_down_read_trylock(&tty->ldisc_sem)) {
+ if (!tty->ldisc)
+ ldsem_up_read(&tty->ldisc_sem);
+ return tty->ldisc;
+ }
+ return NULL;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref);
@@ -334,27 +297,11 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref);
*
* Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May
* be called in IRQ context.
- *
- * Locking: takes tty_ldisc_lock
*/
void tty_ldisc_deref(struct tty_ldisc *ld)
{
- unsigned long flags;
-
- if (WARN_ON_ONCE(!ld))
- return;
-
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
- /*
- * WARNs if one-too-many reader references were released
- * - the last reference must be released with tty_ldisc_put
- */
- WARN_ON(atomic_dec_and_test(&ld->users));
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-
- if (waitqueue_active(&ld->wq_idle))
- wake_up(&ld->wq_idle);
+ ldsem_up_read(&ld->tty->ldisc_sem);
}
EXPORT_SYMBOL_GPL(tty_ldisc_deref);
@@ -439,26 +386,6 @@ static void __lockfunc tty_ldisc_enable_pair(struct tty_struct *tty,
/**
- * tty_ldisc_enable - allow ldisc use
- * @tty: terminal to activate ldisc on
- *
- * Set the TTY_LDISC flag when the line discipline can be called
- * again. Do necessary wakeups for existing sleepers. Clear the LDISC
- * changing flag to indicate any ldisc change is now over.
- *
- * Note: nobody should set the TTY_LDISC bit except via this function.
- * Clearing directly is allowed.
- */
-
-static void tty_ldisc_enable(struct tty_struct *tty)
-{
- clear_bit(TTY_LDISC_HALTED, &tty->flags);
- set_bit(TTY_LDISC, &tty->flags);
- clear_bit(TTY_LDISC_CHANGING, &tty->flags);
- wake_up(&tty_ldisc_wait);
-}
-
-/**
* tty_ldisc_flush - flush line discipline queue
* @tty: tty
*
@@ -555,14 +482,14 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
int r;
/* There is an outstanding reference here so this is safe */
- old = tty_ldisc_get(old->ops->num);
+ old = tty_ldisc_get(tty, old->ops->num);
WARN_ON(IS_ERR(old));
tty->ldisc = old;
tty_set_termios_ldisc(tty, old->ops->num);
if (tty_ldisc_open(tty, old) < 0) {
tty_ldisc_put(old);
/* This driver is always present */
- new_ldisc = tty_ldisc_get(N_TTY);
+ new_ldisc = tty_ldisc_get(tty, N_TTY);
if (IS_ERR(new_ldisc))
panic("n_tty: get");
tty->ldisc = new_ldisc;
@@ -576,101 +503,6 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
}
/**
- * tty_ldisc_wait_idle - wait for the ldisc to become idle
- * @tty: tty to wait for
- * @timeout: for how long to wait at most
- *
- * Wait for the line discipline to become idle. The discipline must
- * have been halted for this to guarantee it remains idle.
- */
-static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
-{
- long ret;
- ret = wait_event_timeout(tty->ldisc->wq_idle,
- atomic_read(&tty->ldisc->users) == 1, timeout);
- return ret > 0 ? 0 : -EBUSY;
-}
-
-/**
- * tty_ldisc_halt - shut down the line discipline
- * @tty: tty device
- * @o_tty: paired pty device (can be NULL)
- * @timeout: # of jiffies to wait for ldisc refs to be released
- *
- * Shut down the line discipline and work queue for this tty device and
- * its paired pty (if exists). Clearing the TTY_LDISC flag ensures
- * no further references can be obtained, while waiting for existing
- * references to be released ensures no more data is fed to the ldisc.
- *
- * You need to do a 'flush_scheduled_work()' (outside the ldisc_mutex)
- * in order to make sure any currently executing ldisc work is also
- * flushed.
- */
-
-static int tty_ldisc_halt(struct tty_struct *tty, struct tty_struct *o_tty,
- long timeout)
-{
- int retval;
-
- clear_bit(TTY_LDISC, &tty->flags);
- if (o_tty)
- clear_bit(TTY_LDISC, &o_tty->flags);
-
- retval = tty_ldisc_wait_idle(tty, timeout);
- if (!retval && o_tty)
- retval = tty_ldisc_wait_idle(o_tty, timeout);
- if (retval)
- return retval;
-
- set_bit(TTY_LDISC_HALTED, &tty->flags);
- if (o_tty)
- set_bit(TTY_LDISC_HALTED, &o_tty->flags);
-
- return 0;
-}
-
-/**
- * tty_ldisc_hangup_halt - halt the line discipline for hangup
- * @tty: tty being hung up
- *
- * Shut down the line discipline and work queue for the tty device
- * being hungup. Clear the TTY_LDISC flag to ensure no further
- * references can be obtained and wait for remaining references to be
- * released to ensure no more data is fed to this ldisc.
- * Caller must hold legacy and ->ldisc_mutex.
- *
- * NB: tty_set_ldisc() is prevented from changing the ldisc concurrently
- * with this function by checking the TTY_HUPPING flag.
- */
-static bool tty_ldisc_hangup_halt(struct tty_struct *tty)
-{
- char cur_n[TASK_COMM_LEN], tty_n[64];
- long timeout = 3 * HZ;
-
- clear_bit(TTY_LDISC, &tty->flags);
-
- if (tty->ldisc) { /* Not yet closed */
- tty_unlock(tty);
-
- while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
- timeout = MAX_SCHEDULE_TIMEOUT;
- printk_ratelimited(KERN_WARNING
- "%s: waiting (%s) for %s took too long, but we keep waiting...\n",
- __func__, get_task_comm(cur_n, current),
- tty_name(tty, tty_n));
- }
-
- set_bit(TTY_LDISC_HALTED, &tty->flags);
-
- /* must reacquire both locks and preserve lock order */
- mutex_unlock(&tty->ldisc_mutex);
- tty_lock(tty);
- mutex_lock(&tty->ldisc_mutex);
- }
- return !!tty->ldisc;
-}
-
-/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
* @ldisc: the line discipline
@@ -679,103 +511,45 @@ static bool tty_ldisc_hangup_halt(struct tty_struct *tty)
* context. The ldisc change logic has to protect itself against any
* overlapping ldisc change (including on the other end of pty pairs),
* the close of one side of a tty/pty pair, and eventually hangup.
- *
- * Locking: takes tty_ldisc_lock, termios_mutex
*/
int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
int retval;
struct tty_ldisc *o_ldisc, *new_ldisc;
- struct tty_struct *o_tty;
+ struct tty_struct *o_tty = tty->link;
- new_ldisc = tty_ldisc_get(ldisc);
+ new_ldisc = tty_ldisc_get(tty, ldisc);
if (IS_ERR(new_ldisc))
return PTR_ERR(new_ldisc);
- tty_lock(tty);
- /*
- * We need to look at the tty locking here for pty/tty pairs
- * when both sides try to change in parallel.
- */
-
- o_tty = tty->link; /* o_tty is the pty side or NULL */
-
+ retval = tty_ldisc_lock_pair_timeout(tty, o_tty, 5 * HZ);
+ if (retval)
+ return retval;
/*
* Check the no-op case
*/
if (tty->ldisc->ops->num == ldisc) {
- tty_unlock(tty);
+ tty_ldisc_enable_pair(tty, o_tty);
tty_ldisc_put(new_ldisc);
return 0;
}
- mutex_lock(&tty->ldisc_mutex);
-
- /*
- * We could be midstream of another ldisc change which has
- * dropped the lock during processing. If so we need to wait.
- */
-
- while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
- mutex_unlock(&tty->ldisc_mutex);
- tty_unlock(tty);
- wait_event(tty_ldisc_wait,
- test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
- tty_lock(tty);
- mutex_lock(&tty->ldisc_mutex);
- }
-
- set_bit(TTY_LDISC_CHANGING, &tty->flags);
-
- /*
- * No more input please, we are switching. The new ldisc
- * will update this value in the ldisc open function
- */
-
+ /* FIXME: why 'shutoff' input if the ldisc is locked? */
tty->receive_room = 0;
o_ldisc = tty->ldisc;
-
- tty_unlock(tty);
- /*
- * Make sure we don't change while someone holds a
- * reference to the line discipline. The TTY_LDISC bit
- * prevents anyone taking a reference once it is clear.
- * We need the lock to avoid racing reference takers.
- *
- * We must clear the TTY_LDISC bit here to avoid a livelock
- * with a userspace app continually trying to use the tty in
- * parallel to the change and re-referencing the tty.
- */
-
- retval = tty_ldisc_halt(tty, o_tty, 5 * HZ);
-
- /*
- * Wait for hangup to complete, if pending.
- * We must drop the mutex here in case a hangup is also in process.
- */
-
- mutex_unlock(&tty->ldisc_mutex);
-
- flush_work(&tty->hangup_work);
-
tty_lock(tty);
- mutex_lock(&tty->ldisc_mutex);
- /* handle wait idle failure locked */
- if (retval) {
- tty_ldisc_put(new_ldisc);
- goto enable;
- }
+ /* FIXME: for testing only */
+ WARN_ON(test_bit(TTY_HUPPED, &tty->flags));
if (test_bit(TTY_HUPPING, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
- clear_bit(TTY_LDISC_CHANGING, &tty->flags);
- mutex_unlock(&tty->ldisc_mutex);
+ tty_ldisc_enable_pair(tty, o_tty);
tty_ldisc_put(new_ldisc);
tty_unlock(tty);
return -EIO;
@@ -804,14 +578,10 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
tty_ldisc_put(o_ldisc);
-enable:
/*
* Allow ldisc referencing to occur again
*/
-
- tty_ldisc_enable(tty);
- if (o_tty)
- tty_ldisc_enable(o_tty);
+ tty_ldisc_enable_pair(tty, o_tty);
/* Restart the work queue in case no characters kick it off. Safe if
already running */
@@ -819,7 +589,6 @@ enable:
if (o_tty)
schedule_work(&o_tty->port->buf.work);
- mutex_unlock(&tty->ldisc_mutex);
tty_unlock(tty);
return retval;
}
@@ -852,7 +621,7 @@ static void tty_reset_termios(struct tty_struct *tty)
static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
{
- struct tty_ldisc *ld = tty_ldisc_get(ldisc);
+ struct tty_ldisc *ld = tty_ldisc_get(tty, ldisc);
if (IS_ERR(ld))
return -1;
@@ -891,14 +660,8 @@ void tty_ldisc_hangup(struct tty_struct *tty)
tty_ldisc_debug(tty, "closing ldisc: %p\n", tty->ldisc);
- /*
- * FIXME! What are the locking issues here? This may me overdoing
- * things... This question is especially important now that we've
- * removed the irqlock.
- */
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
- /* We may have no line discipline at this point */
if (ld->ops->flush_buffer)
ld->ops->flush_buffer(tty);
tty_driver_flush_buffer(tty);
@@ -909,21 +672,22 @@ void tty_ldisc_hangup(struct tty_struct *tty)
ld->ops->hangup(tty);
tty_ldisc_deref(ld);
}
- /*
- * FIXME: Once we trust the LDISC code better we can wait here for
- * ldisc completion and fix the driver call race
- */
+
wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
wake_up_interruptible_poll(&tty->read_wait, POLLIN);
+
+ tty_unlock(tty);
+
/*
* Shutdown the current line discipline, and reset it to
* N_TTY if need be.
*
* Avoid racing set_ldisc or tty_ldisc_release
*/
- mutex_lock(&tty->ldisc_mutex);
+ tty_ldisc_lock_pair(tty, tty->link);
+ tty_lock(tty);
- if (tty_ldisc_hangup_halt(tty)) {
+ if (tty->ldisc) {
/* At this point we have a halted ldisc; we want to close it and
reopen a new ldisc. We could defer the reopen to the next
@@ -942,9 +706,8 @@ void tty_ldisc_hangup(struct tty_struct *tty)
BUG_ON(tty_ldisc_reinit(tty, N_TTY));
WARN_ON(tty_ldisc_open(tty, tty->ldisc));
}
- tty_ldisc_enable(tty);
}
- mutex_unlock(&tty->ldisc_mutex);
+ tty_ldisc_enable_pair(tty, tty->link);
if (reset)
tty_reset_termios(tty);
@@ -976,15 +739,12 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
tty_ldisc_close(tty, ld);
return retval;
}
- tty_ldisc_enable(o_tty);
}
- tty_ldisc_enable(tty);
return 0;
}
static void tty_ldisc_kill(struct tty_struct *tty)
{
- mutex_lock(&tty->ldisc_mutex);
/*
* Now kill off the ldisc
*/
@@ -995,7 +755,6 @@ static void tty_ldisc_kill(struct tty_struct *tty)
/* Ensure the next open requests the N_TTY ldisc */
tty_set_termios_ldisc(tty, N_TTY);
- mutex_unlock(&tty->ldisc_mutex);
}
/**
@@ -1017,15 +776,16 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
tty_ldisc_debug(tty, "closing ldisc: %p\n", tty->ldisc);
- tty_ldisc_halt(tty, o_tty, MAX_SCHEDULE_TIMEOUT);
-
+ tty_ldisc_lock_pair(tty, o_tty);
tty_lock_pair(tty, o_tty);
- /* This will need doing differently if we need to lock */
+
tty_ldisc_kill(tty);
if (o_tty)
tty_ldisc_kill(o_tty);
tty_unlock_pair(tty, o_tty);
+ tty_ldisc_unlock_pair(tty, o_tty);
+
/* And the memory resources remaining (buffers, termios) will be
disposed of when the kref hits zero */
@@ -1042,7 +802,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
void tty_ldisc_init(struct tty_struct *tty)
{
- struct tty_ldisc *ld = tty_ldisc_get(N_TTY);
+ struct tty_ldisc *ld = tty_ldisc_get(tty, N_TTY);
if (IS_ERR(ld))
panic("n_tty: init_tty");
tty->ldisc = ld;
diff --git a/include/linux/tty.h b/include/linux/tty.h
index bfa6fca..2c109a3 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -238,7 +238,7 @@ struct tty_struct {
int index;
/* Protects ldisc changes: Lock tty not pty */
- struct mutex ldisc_mutex;
+ struct ld_semaphore ldisc_sem;
struct tty_ldisc *ldisc;
struct mutex atomic_write_lock;
@@ -306,8 +306,6 @@ struct tty_file_private {
#define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */
#define TTY_PUSH 6 /* n_tty private */
#define TTY_CLOSING 7 /* ->close() in progress */
-#define TTY_LDISC 9 /* Line discipline attached */
-#define TTY_LDISC_CHANGING 10 /* Line discipline changing */
#define TTY_LDISC_OPEN 11 /* Line discipline is open */
#define TTY_HW_COOK_OUT 14 /* Hardware can do output cooking */
#define TTY_HW_COOK_IN 15 /* Hardware can do input cooking */
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index ca000fc..272075e 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -197,8 +197,7 @@ struct tty_ldisc_ops {
struct tty_ldisc {
struct tty_ldisc_ops *ops;
- atomic_t users;
- wait_queue_head_t wq_idle;
+ struct tty_struct *tty;
};
#define TTY_LDISC_MAGIC 0x5403
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 4/7] tty: Clarify ldisc variable
2013-04-16 10:15 ` [PATCH 1/7] tty: Add timed, writer-prioritized rw semaphore Peter Hurley
2013-04-16 10:15 ` [PATCH 2/7] tty: Add lock/unlock ldisc pair functions Peter Hurley
2013-04-16 10:15 ` [PATCH 3/7] tty: Replace ldisc locking with ldisc_sem Peter Hurley
@ 2013-04-16 10:15 ` Peter Hurley
2013-04-16 10:15 ` [PATCH 5/7] tty: Fix hangup race with TIOCSETD ioctl Peter Hurley
` (2 subsequent siblings)
5 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-16 10:15 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Rename o_ldisc to avoid confusion with the ldisc of the
'other' tty.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_ldisc.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index a150f95..9ace119 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -516,7 +516,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
int retval;
- struct tty_ldisc *o_ldisc, *new_ldisc;
+ struct tty_ldisc *old_ldisc, *new_ldisc;
struct tty_struct *o_tty = tty->link;
new_ldisc = tty_ldisc_get(tty, ldisc);
@@ -540,7 +540,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
/* FIXME: why 'shutoff' input if the ldisc is locked? */
tty->receive_room = 0;
- o_ldisc = tty->ldisc;
+ old_ldisc = tty->ldisc;
tty_lock(tty);
/* FIXME: for testing only */
@@ -555,8 +555,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
return -EIO;
}
- /* Shutdown the current discipline. */
- tty_ldisc_close(tty, o_ldisc);
+ /* Shutdown the old discipline. */
+ tty_ldisc_close(tty, old_ldisc);
/* Now set up the new line discipline. */
tty->ldisc = new_ldisc;
@@ -566,17 +566,17 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
if (retval < 0) {
/* Back to the old one or N_TTY if we can't */
tty_ldisc_put(new_ldisc);
- tty_ldisc_restore(tty, o_ldisc);
+ tty_ldisc_restore(tty, old_ldisc);
}
/* At this point we hold a reference to the new ldisc and a
a reference to the old ldisc. If we ended up flipping back
to the existing ldisc we have two references to it */
- if (tty->ldisc->ops->num != o_ldisc->ops->num && tty->ops->set_ldisc)
+ if (tty->ldisc->ops->num != old_ldisc->ops->num && tty->ops->set_ldisc)
tty->ops->set_ldisc(tty);
- tty_ldisc_put(o_ldisc);
+ tty_ldisc_put(old_ldisc);
/*
* Allow ldisc referencing to occur again
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 5/7] tty: Fix hangup race with TIOCSETD ioctl
2013-04-16 10:15 ` [PATCH 1/7] tty: Add timed, writer-prioritized rw semaphore Peter Hurley
` (2 preceding siblings ...)
2013-04-16 10:15 ` [PATCH 4/7] tty: Clarify ldisc variable Peter Hurley
@ 2013-04-16 10:15 ` Peter Hurley
2013-04-16 10:15 ` [PATCH 6/7] tty: Clarify multiple-references comment in " Peter Hurley
2013-04-16 10:15 ` [PATCH 7/7] tty: Fix tty_ldisc_lock name collision Peter Hurley
5 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-16 10:15 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
The hangup may already have happened; check for that state also.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_ldisc.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 9ace119..84ba790 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -543,10 +543,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
old_ldisc = tty->ldisc;
tty_lock(tty);
- /* FIXME: for testing only */
- WARN_ON(test_bit(TTY_HUPPED, &tty->flags));
-
- if (test_bit(TTY_HUPPING, &tty->flags)) {
+ if (test_bit(TTY_HUPPING, &tty->flags) ||
+ test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
tty_ldisc_enable_pair(tty, o_tty);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 6/7] tty: Clarify multiple-references comment in TIOCSETD ioctl
2013-04-16 10:15 ` [PATCH 1/7] tty: Add timed, writer-prioritized rw semaphore Peter Hurley
` (3 preceding siblings ...)
2013-04-16 10:15 ` [PATCH 5/7] tty: Fix hangup race with TIOCSETD ioctl Peter Hurley
@ 2013-04-16 10:15 ` Peter Hurley
2013-04-16 10:15 ` [PATCH 7/7] tty: Fix tty_ldisc_lock name collision Peter Hurley
5 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-16 10:15 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_ldisc.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 84ba790..9725c94 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -567,13 +567,15 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
tty_ldisc_restore(tty, old_ldisc);
}
- /* At this point we hold a reference to the new ldisc and a
- a reference to the old ldisc. If we ended up flipping back
- to the existing ldisc we have two references to it */
-
if (tty->ldisc->ops->num != old_ldisc->ops->num && tty->ops->set_ldisc)
tty->ops->set_ldisc(tty);
+ /* At this point we hold a reference to the new ldisc and a
+ reference to the old ldisc, or we hold two references to
+ the old ldisc (if it was restored as part of error cleanup
+ above). In either case, releasing a single reference from
+ the old ldisc is correct. */
+
tty_ldisc_put(old_ldisc);
/*
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH 7/7] tty: Fix tty_ldisc_lock name collision
2013-04-16 10:15 ` [PATCH 1/7] tty: Add timed, writer-prioritized rw semaphore Peter Hurley
` (4 preceding siblings ...)
2013-04-16 10:15 ` [PATCH 6/7] tty: Clarify multiple-references comment in " Peter Hurley
@ 2013-04-16 10:15 ` Peter Hurley
5 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-04-16 10:15 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Jiri Slaby, linux-serial, linux-kernel, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_ldisc.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 9725c94..ba49c0e 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -44,7 +44,7 @@ enum {
* callers who will do ldisc lookups and cannot sleep.
*/
-static DEFINE_RAW_SPINLOCK(tty_ldisc_lock);
+static DEFINE_RAW_SPINLOCK(tty_ldiscs_lock);
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
@@ -58,7 +58,7 @@ static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
* from this point onwards.
*
* Locking:
- * takes tty_ldisc_lock to guard against ldisc races
+ * takes tty_ldiscs_lock to guard against ldisc races
*/
int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc)
@@ -69,11 +69,11 @@ int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc)
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
tty_ldiscs[disc] = new_ldisc;
new_ldisc->num = disc;
new_ldisc->refcount = 0;
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
return ret;
}
@@ -88,7 +88,7 @@ EXPORT_SYMBOL(tty_register_ldisc);
* currently in use.
*
* Locking:
- * takes tty_ldisc_lock to guard against ldisc races
+ * takes tty_ldiscs_lock to guard against ldisc races
*/
int tty_unregister_ldisc(int disc)
@@ -99,12 +99,12 @@ int tty_unregister_ldisc(int disc)
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
if (tty_ldiscs[disc]->refcount)
ret = -EBUSY;
else
tty_ldiscs[disc] = NULL;
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
return ret;
}
@@ -115,7 +115,7 @@ static struct tty_ldisc_ops *get_ldops(int disc)
unsigned long flags;
struct tty_ldisc_ops *ldops, *ret;
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
ret = ERR_PTR(-EINVAL);
ldops = tty_ldiscs[disc];
if (ldops) {
@@ -125,7 +125,7 @@ static struct tty_ldisc_ops *get_ldops(int disc)
ret = ldops;
}
}
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
return ret;
}
@@ -133,10 +133,10 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
{
unsigned long flags;
- raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+ raw_spin_lock_irqsave(&tty_ldiscs_lock, flags);
ldops->refcount--;
module_put(ldops->owner);
- raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
}
/**
@@ -149,7 +149,7 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
* available
*
* Locking:
- * takes tty_ldisc_lock to guard against ldisc races
+ * takes tty_ldiscs_lock to guard against ldisc races
*/
static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread
* [PATCH v4 00/24] lockless n_tty receive path
2013-04-15 15:19 ` [PATCH v3 00/24] " Peter Hurley
` (25 preceding siblings ...)
2013-04-15 20:14 ` [PATCH v3 00/24] lockless n_tty receive path Greg Kroah-Hartman
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 01/24] tty: Don't change receive_room for ioctl(TIOCSETD) Peter Hurley
` (25 more replies)
26 siblings, 26 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Greg,
As before, this patchset is dependent on the 'ldsem patchset'.
The reason is that this series abandons tty->receive_room as
a flow control mechanism (because that requires locking),
and the TIOCSETD ioctl _without ldsem_ uses tty->receive_room
to shutoff i/o.
It is also dependent on 'n_tty fixes' which I recently resent
to you.
Regards,
Peter Hurley
*******
This patchset is the 1st of 4 patchsets which implements an almost
entirely lockless receive path from driver to user-space.
Non-rigorous performance measurements show a 9~15x speed improvement
on SMP in end-to-end copying with all 4 patchsets applied.
** v4 changes **
- Rebased on tty.git/tty-next of 14 Jun
** v3 changes **
- Instead of a new receive_room() ldisc method which requires acquiring
the termios_rwsem twice for every flip buffer received, this patchset
version adds an alternate receive_buf2() ldisc method for use with
flow-controlled line disciplines (like N_TTY). This also fixes a
race when termios can be changed between computing the receive space
available and the subsequent receive_buf().
- Converts vt paste_selection() to use a helper function for this new
ldisc method.
- Protects the n_tty_write() path from termios changes.
- Optimizes the N_TTY throttle/unthrottle by only offering termios
read-safety to the driver throttle()/unthrottle() methods.
- Special-casing pty throttle/unthrottle to avoid multiple atomic
operations for every read.
** v2 changes **
- Rebased on top of 'tty: Fix race condition if flushing tty flip buffers'
- I forgot to mention; this is ~35% faster on end-to-end tests on SMP.
This patchset implements lockless receive from tty flip buffers
to the n_tty read buffer and lockless copy into the user-space
read buffer.
By lockless, I'm referring to the fine-grained read_lock formerly used
to serialize access to the shared n_tty read buffer (which wasn't being
used everywhere it should have been).
In the current n_tty, the read_lock is grabbed a minimum of
3 times per byte!
- ^^^^
- should say 2 times per byte!
The read_lock is unnecessary to serialize access between the flip
buffer work and the single reader, as this is a
single-producer/single-consumer pattern.
However, other threads may attempt to read or modify the buffer indices,
notably for buffer flushing and for setting/resetting termios
(there are some others). In addition, termios changes can cause
havoc while the tty flip buffer work is pushing more data.
Read more about that here: https://lkml.org/lkml/2013/2/22/480
Both hurdles are overcome with the same mechanism: converting the
termios_mutex to a r/w semaphore (just a normal one :).
Both the receive_buf() path and the read() path claim a reader lock
on the termios_rwsem. This prevents concurrent changes to termios.
Also, flush_buffer() and TIOCINQ ioctl obtain a write lock on the
termios_rwsem to exclude the flip buffer work and user-space read
from accessing the buffer indices while resetting them.
This patchset also implements a block copy from the read_buf
into the user-space buffer in canonical mode (rather than the
current byte-by-byte method).
Peter Hurley (24):
tty: Don't change receive_room for ioctl(TIOCSETD)
tty: Simplify tty buffer/ldisc interface with helper function
tty: Make ldisc input flow control concurrency-friendly
n_tty: Factor canonical mode copy from n_tty_read()
n_tty: Line copy to user buffer in canonical mode
n_tty: Split n_tty_chars_in_buffer() for reader-only interface
tty: Deprecate ldisc .chars_in_buffer() method
n_tty: Get read_cnt through accessor
n_tty: Don't wrap input buffer indices at buffer size
n_tty: Remove read_cnt
tty: Convert termios_mutex to termios_rwsem
n_tty: Access termios values safely
n_tty: Replace canon_data with index comparison
n_tty: Make N_TTY ldisc receive path lockless
n_tty: Reset lnext if canonical mode changes
n_tty: Fix type mismatches in receive_buf raw copy
n_tty: Don't wait for buffer work in read() loop
n_tty: Separate buffer indices to prevent cache-line sharing
tty: Only guarantee termios read safety for throttle/unthrottle
n_tty: Move chars_in_buffer() to factor throttle/unthrottle
n_tty: Factor throttle/unthrottle into helper functions
n_tty: Move n_tty_write_wakeup() to avoid forward declaration
n_tty: Special case pty flow control
n_tty: Queue buffer work on any available cpu
drivers/net/irda/irtty-sir.c | 8 +-
drivers/tty/n_tty.c | 662 ++++++++++++++++++++++++++-----------------
drivers/tty/pty.c | 4 +-
drivers/tty/tty_buffer.c | 34 ++-
drivers/tty/tty_io.c | 15 +-
drivers/tty/tty_ioctl.c | 90 +++---
drivers/tty/tty_ldisc.c | 13 +-
drivers/tty/vt/selection.c | 4 +-
drivers/tty/vt/vt.c | 4 +-
include/linux/tty.h | 21 +-
include/linux/tty_ldisc.h | 13 +
11 files changed, 530 insertions(+), 338 deletions(-)
--
1.8.1.2
^ permalink raw reply [flat|nested] 238+ messages in thread* [PATCH v4 01/24] tty: Don't change receive_room for ioctl(TIOCSETD)
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 02/24] tty: Simplify tty buffer/ldisc interface with helper function Peter Hurley
` (24 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
tty_set_ldisc() is guaranteed exclusive use of the line discipline
by tty_ldisc_lock_pair_timeout(); shutting off input by resetting
receive_room is unnecessary.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_ldisc.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index edeb1dd..86356e3 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -540,9 +540,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
return 0;
}
- /* FIXME: why 'shutoff' input if the ldisc is locked? */
- tty->receive_room = 0;
-
old_ldisc = tty->ldisc;
tty_lock(tty);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 02/24] tty: Simplify tty buffer/ldisc interface with helper function
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
2013-06-15 13:14 ` [PATCH v4 01/24] tty: Don't change receive_room for ioctl(TIOCSETD) Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 03/24] tty: Make ldisc input flow control concurrency-friendly Peter Hurley
` (23 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Ldisc interface functions must be called with interrupts enabled.
Separating the ldisc calls into a helper function simplies the
eventual removal of the spinlock.
Note that access to the buf->head ptr outside the spinlock is
safe here because;
* __tty_buffer_flush() is prevented from running while buffer work
performs i/o,
* tty_buffer_find() only assigns buf->head if the flip buffer list
is empty (which is never the case in flush_to_ldisc() since at
least one buffer is always left in the list after use)
Access to the read index outside the spinlock is safe here for the
same reasons.
Update the buffer's read index _after_ the data has been received
by the ldisc.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 29 +++++++++++++++++------------
1 file changed, 17 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index a42a028..6c7a1d0 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -403,6 +403,18 @@ int tty_prepare_flip_string_flags(struct tty_port *port,
EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
+static int
+receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
+{
+ struct tty_ldisc *disc = tty->ldisc;
+
+ count = min_t(int, count, tty->receive_room);
+ if (count)
+ disc->ops->receive_buf(tty, head->char_buf_ptr + head->read,
+ head->flag_buf_ptr + head->read, count);
+ head->read += count;
+ return count;
+}
/**
* flush_to_ldisc
@@ -438,8 +450,6 @@ static void flush_to_ldisc(struct work_struct *work)
struct tty_buffer *head;
while ((head = buf->head) != NULL) {
int count;
- char *char_buf;
- unsigned char *flag_buf;
count = head->commit - head->read;
if (!count) {
@@ -449,16 +459,10 @@ static void flush_to_ldisc(struct work_struct *work)
tty_buffer_free(port, head);
continue;
}
- if (!tty->receive_room)
- break;
- if (count > tty->receive_room)
- count = tty->receive_room;
- char_buf = head->char_buf_ptr + head->read;
- flag_buf = head->flag_buf_ptr + head->read;
- head->read += count;
spin_unlock_irqrestore(&buf->lock, flags);
- disc->ops->receive_buf(tty, char_buf,
- flag_buf, count);
+
+ count = receive_buf(tty, head, count);
+
spin_lock_irqsave(&buf->lock, flags);
/* Ldisc or user is trying to flush the buffers.
We may have a deferred request to flush the
@@ -469,7 +473,8 @@ static void flush_to_ldisc(struct work_struct *work)
clear_bit(TTYP_FLUSHPENDING, &port->iflags);
wake_up(&tty->read_wait);
break;
- }
+ } else if (!count)
+ break;
}
clear_bit(TTYP_FLUSHING, &port->iflags);
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 03/24] tty: Make ldisc input flow control concurrency-friendly
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
2013-06-15 13:14 ` [PATCH v4 01/24] tty: Don't change receive_room for ioctl(TIOCSETD) Peter Hurley
2013-06-15 13:14 ` [PATCH v4 02/24] tty: Simplify tty buffer/ldisc interface with helper function Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 04/24] n_tty: Factor canonical mode copy from n_tty_read() Peter Hurley
` (22 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Although line discipline receiving is single-producer/single-consumer,
using tty->receive_room to manage flow control creates unnecessary
critical regions requiring additional lock use.
Instead, introduce the optional .receive_buf2() ldisc method which
returns the # of bytes actually received. Serialization is guaranteed
by the caller.
In turn, the line discipline should schedule the buffer work item
whenever space becomes available; ie., when there is room to receive
data and receive_room() previously returned 0 (the buffer work
item stops processing if receive_buf2() returns 0). Note the
'no room' state need not be atomic despite concurrent use by two
threads because only the buffer work thread can set the state and
only the read() thread can clear the state.
Add n_tty_receive_buf2() as the receive_buf2() method for N_TTY.
Provide a public helper function, tty_ldisc_receive_buf(), to use
when directly accessing the receive_buf() methods.
Line disciplines not using input flow control can continue to set
tty->receive_room to a fixed value and only provide the receive_buf()
method.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 72 +++++++++++++++++++++++++++++-----------------
drivers/tty/tty_buffer.c | 13 ++++++---
drivers/tty/vt/selection.c | 4 +--
include/linux/tty.h | 13 +++++++++
include/linux/tty_ldisc.h | 13 +++++++++
5 files changed, 82 insertions(+), 33 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 4bf0fc0..eddeb78 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -79,6 +79,9 @@ struct n_tty_data {
unsigned long overrun_time;
int num_overrun;
+ /* non-atomic */
+ bool no_room;
+
unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
unsigned char echo_overrun:1;
@@ -114,25 +117,10 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
return put_user(x, ptr);
}
-/**
- * n_tty_set_room - receive space
- * @tty: terminal
- *
- * Updates tty->receive_room to reflect the currently available space
- * in the input buffer, and re-schedules the flip buffer work if space
- * just became available.
- *
- * Locks: Concurrent update is protected with read_lock
- */
-
-static int set_room(struct tty_struct *tty)
+static int receive_room(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
int left;
- int old_left;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
if (I_PARMRK(tty)) {
/* Multiply read_cnt by 3, since each byte might take up to
@@ -150,18 +138,27 @@ static int set_room(struct tty_struct *tty)
*/
if (left <= 0)
left = ldata->icanon && !ldata->canon_data;
- old_left = tty->receive_room;
- tty->receive_room = left;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
-
- return left && !old_left;
+ return left;
}
+/**
+ * n_tty_set_room - receive space
+ * @tty: terminal
+ *
+ * Re-schedules the flip buffer work if space just became available.
+ *
+ * Locks: Concurrent update is protected with read_lock
+ */
+
static void n_tty_set_room(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
/* Did this open up the receive buffer? We may need to flip */
- if (set_room(tty)) {
+ if (unlikely(ldata->no_room) && receive_room(tty)) {
+ ldata->no_room = 0;
+
WARN_RATELIMIT(tty->port->itty == NULL,
"scheduling with invalid itty\n");
/* see if ldisc has been killed - if so, this means that
@@ -1408,8 +1405,8 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
* calls one at a time and in order (or using flush_to_ldisc)
*/
-static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
- char *fp, int count)
+static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
{
struct n_tty_data *ldata = tty->disc_data;
const unsigned char *p;
@@ -1464,8 +1461,6 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
tty->ops->flush_chars(tty);
}
- set_room(tty);
-
if ((!ldata->icanon && (ldata->read_cnt >= ldata->minimum_to_wake)) ||
L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
@@ -1480,7 +1475,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
*/
while (1) {
tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
- if (tty->receive_room >= TTY_THRESHOLD_THROTTLE)
+ if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE)
break;
if (!tty_throttle_safe(tty))
break;
@@ -1488,6 +1483,28 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
__tty_set_flow_change(tty, 0);
}
+static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ __receive_buf(tty, cp, fp, count);
+}
+
+static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ int room;
+
+ tty->receive_room = room = receive_room(tty);
+ if (!room)
+ ldata->no_room = 1;
+ count = min(count, room);
+ if (count)
+ __receive_buf(tty, cp, fp, count);
+
+ return count;
+}
+
int is_ignored(int sig)
{
return (sigismember(¤t->blocked, sig) ||
@@ -2203,6 +2220,7 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = {
.receive_buf = n_tty_receive_buf,
.write_wakeup = n_tty_write_wakeup,
.fasync = n_tty_fasync,
+ .receive_buf2 = n_tty_receive_buf2,
};
/**
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 6c7a1d0..ff1b2e3 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -407,11 +407,16 @@ static int
receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
{
struct tty_ldisc *disc = tty->ldisc;
+ char *p = head->char_buf_ptr + head->read;
+ unsigned char *f = head->flag_buf_ptr + head->read;
- count = min_t(int, count, tty->receive_room);
- if (count)
- disc->ops->receive_buf(tty, head->char_buf_ptr + head->read,
- head->flag_buf_ptr + head->read, count);
+ if (disc->ops->receive_buf2)
+ count = disc->ops->receive_buf2(tty, p, f, count);
+ else {
+ count = min_t(int, count, tty->receive_room);
+ if (count)
+ disc->ops->receive_buf(tty, p, f, count);
+ }
head->read += count;
return count;
}
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 60b7b69..2ca8d6b 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -356,8 +356,8 @@ int paste_selection(struct tty_struct *tty)
continue;
}
count = sel_buffer_lth - pasted;
- count = min(count, tty->receive_room);
- ld->ops->receive_buf(tty, sel_buffer + pasted, NULL, count);
+ count = tty_ldisc_receive_buf(ld, sel_buffer + pasted, NULL,
+ count);
pasted += count;
}
remove_wait_queue(&vc->paste_wait, &wait);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 7269daf..8323ee4 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -557,6 +557,19 @@ extern void tty_ldisc_init(struct tty_struct *tty);
extern void tty_ldisc_deinit(struct tty_struct *tty);
extern void tty_ldisc_begin(void);
+static inline int tty_ldisc_receive_buf(struct tty_ldisc *ld, unsigned char *p,
+ char *f, int count)
+{
+ if (ld->ops->receive_buf2)
+ count = ld->ops->receive_buf2(ld->tty, p, f, count);
+ else {
+ count = min_t(int, count, ld->tty->receive_room);
+ if (count)
+ ld->ops->receive_buf(ld->tty, p, f, count);
+ }
+ return count;
+}
+
/* n_tty.c */
extern struct tty_ldisc_ops tty_ldisc_N_TTY;
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 23bdd9d..f15c898 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -109,6 +109,17 @@
*
* Tells the discipline that the DCD pin has changed its status.
* Used exclusively by the N_PPS (Pulse-Per-Second) line discipline.
+ *
+ * int (*receive_buf2)(struct tty_struct *, const unsigned char *cp,
+ * char *fp, int count);
+ *
+ * This function is called by the low-level tty driver to send
+ * characters received by the hardware to the line discpline for
+ * processing. <cp> is a pointer to the buffer of input
+ * character received by the device. <fp> is a pointer to a
+ * pointer of flag bytes which indicate whether a character was
+ * received with a parity error, etc.
+ * If assigned, prefer this function for automatic flow control.
*/
#include <linux/fs.h>
@@ -195,6 +206,8 @@ struct tty_ldisc_ops {
void (*write_wakeup)(struct tty_struct *);
void (*dcd_change)(struct tty_struct *, unsigned int);
void (*fasync)(struct tty_struct *tty, int on);
+ int (*receive_buf2)(struct tty_struct *, const unsigned char *cp,
+ char *fp, int count);
struct module *owner;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 04/24] n_tty: Factor canonical mode copy from n_tty_read()
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (2 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 03/24] tty: Make ldisc input flow control concurrency-friendly Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 05/24] n_tty: Line copy to user buffer in canonical mode Peter Hurley
` (21 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Simplify n_tty_read(); extract complex copy algorithm
into separate function, canon_copy_to_user().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 95 ++++++++++++++++++++++++++++++++---------------------
1 file changed, 57 insertions(+), 38 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index eddeb78..7fd7774 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1747,6 +1747,62 @@ static int copy_from_read_buf(struct tty_struct *tty,
return retval;
}
+/**
+ * canon_copy_to_user - copy read data in canonical mode
+ * @tty: terminal device
+ * @b: user data
+ * @nr: size of data
+ *
+ * Helper function for n_tty_read. It is only called when ICANON is on;
+ * it copies characters one at a time from the read buffer to the user
+ * space buffer.
+ *
+ * Called under the atomic_read_lock mutex
+ */
+
+static int canon_copy_to_user(struct tty_struct *tty,
+ unsigned char __user **b,
+ size_t *nr)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ unsigned long flags;
+ int eol, c;
+
+ /* N.B. avoid overrun if nr == 0 */
+ raw_spin_lock_irqsave(&ldata->read_lock, flags);
+ while (*nr && ldata->read_cnt) {
+
+ eol = test_and_clear_bit(ldata->read_tail, ldata->read_flags);
+ c = ldata->read_buf[ldata->read_tail];
+ ldata->read_tail = (ldata->read_tail+1) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt--;
+ if (eol) {
+ /* this test should be redundant:
+ * we shouldn't be reading data if
+ * canon_data is 0
+ */
+ if (--ldata->canon_data < 0)
+ ldata->canon_data = 0;
+ }
+ raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+
+ if (!eol || (c != __DISABLED_CHAR)) {
+ if (tty_put_user(tty, c, *b))
+ return -EFAULT;
+ *b += 1;
+ *nr -= 1;
+ }
+ if (eol) {
+ tty_audit_push(tty);
+ return 0;
+ }
+ raw_spin_lock_irqsave(&ldata->read_lock, flags);
+ }
+ raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+
+ return 0;
+}
+
extern ssize_t redirected_tty_write(struct file *, const char __user *,
size_t, loff_t *);
@@ -1916,44 +1972,7 @@ do_it_again:
}
if (ldata->icanon && !L_EXTPROC(tty)) {
- /* N.B. avoid overrun if nr == 0 */
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- while (nr && ldata->read_cnt) {
- int eol;
-
- eol = test_and_clear_bit(ldata->read_tail,
- ldata->read_flags);
- c = ldata->read_buf[ldata->read_tail];
- ldata->read_tail = ((ldata->read_tail+1) &
- (N_TTY_BUF_SIZE-1));
- ldata->read_cnt--;
- if (eol) {
- /* this test should be redundant:
- * we shouldn't be reading data if
- * canon_data is 0
- */
- if (--ldata->canon_data < 0)
- ldata->canon_data = 0;
- }
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
-
- if (!eol || (c != __DISABLED_CHAR)) {
- if (tty_put_user(tty, c, b++)) {
- retval = -EFAULT;
- b--;
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- break;
- }
- nr--;
- }
- if (eol) {
- tty_audit_push(tty);
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- break;
- }
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- }
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ retval = canon_copy_to_user(tty, &b, &nr);
if (retval)
break;
} else {
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 05/24] n_tty: Line copy to user buffer in canonical mode
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (3 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 04/24] n_tty: Factor canonical mode copy from n_tty_read() Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 06/24] n_tty: Split n_tty_chars_in_buffer() for reader-only interface Peter Hurley
` (20 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Instead of pushing one char per loop, pre-compute the data length
to copy and copy all at once.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 110 ++++++++++++++++++++++++++++++++++++----------------
1 file changed, 77 insertions(+), 33 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 7fd7774..74dcedd 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -74,6 +74,13 @@
#define ECHO_OP_SET_CANON_COL 0x81
#define ECHO_OP_ERASE_TAB 0x82
+#undef N_TTY_TRACE
+#ifdef N_TTY_TRACE
+# define n_tty_trace(f, args...) trace_printk(f, ##args)
+#else
+# define n_tty_trace(f, args...)
+#endif
+
struct n_tty_data {
unsigned int column;
unsigned long overrun_time;
@@ -1748,58 +1755,95 @@ static int copy_from_read_buf(struct tty_struct *tty,
}
/**
- * canon_copy_to_user - copy read data in canonical mode
+ * canon_copy_from_read_buf - copy read data in canonical mode
* @tty: terminal device
* @b: user data
* @nr: size of data
*
* Helper function for n_tty_read. It is only called when ICANON is on;
- * it copies characters one at a time from the read buffer to the user
- * space buffer.
+ * it copies one line of input up to and including the line-delimiting
+ * character into the user-space buffer.
*
* Called under the atomic_read_lock mutex
*/
-static int canon_copy_to_user(struct tty_struct *tty,
- unsigned char __user **b,
- size_t *nr)
+static int canon_copy_from_read_buf(struct tty_struct *tty,
+ unsigned char __user **b,
+ size_t *nr)
{
struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
- int eol, c;
+ size_t n, size, more, c;
+ unsigned long eol;
+ int ret, tail, found = 0;
/* N.B. avoid overrun if nr == 0 */
+
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- while (*nr && ldata->read_cnt) {
-
- eol = test_and_clear_bit(ldata->read_tail, ldata->read_flags);
- c = ldata->read_buf[ldata->read_tail];
- ldata->read_tail = (ldata->read_tail+1) & (N_TTY_BUF_SIZE-1);
- ldata->read_cnt--;
- if (eol) {
- /* this test should be redundant:
- * we shouldn't be reading data if
- * canon_data is 0
- */
- if (--ldata->canon_data < 0)
- ldata->canon_data = 0;
- }
+
+ n = min_t(size_t, *nr, ldata->read_cnt);
+ if (!n) {
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ return 0;
+ }
- if (!eol || (c != __DISABLED_CHAR)) {
- if (tty_put_user(tty, c, *b))
- return -EFAULT;
- *b += 1;
- *nr -= 1;
- }
- if (eol) {
- tty_audit_push(tty);
- return 0;
- }
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
+ tail = ldata->read_tail;
+ size = min_t(size_t, tail + n, N_TTY_BUF_SIZE);
+
+ n_tty_trace("%s: nr:%zu tail:%d n:%zu size:%zu\n",
+ __func__, *nr, tail, n, size);
+
+ eol = find_next_bit(ldata->read_flags, size, tail);
+ more = n - (size - tail);
+ if (eol == N_TTY_BUF_SIZE && more) {
+ /* scan wrapped without finding set bit */
+ eol = find_next_bit(ldata->read_flags, more, 0);
+ if (eol != more)
+ found = 1;
+ } else if (eol != size)
+ found = 1;
+
+ size = N_TTY_BUF_SIZE - tail;
+ n = (found + eol + size) & (N_TTY_BUF_SIZE - 1);
+ c = n;
+
+ if (found && ldata->read_buf[eol] == __DISABLED_CHAR)
+ n--;
+
+ n_tty_trace("%s: eol:%lu found:%d n:%zu c:%zu size:%zu more:%zu\n",
+ __func__, eol, found, n, c, size, more);
+
+ raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+
+ if (n > size) {
+ ret = copy_to_user(*b, &ldata->read_buf[tail], size);
+ if (ret)
+ return -EFAULT;
+ ret = copy_to_user(*b + size, ldata->read_buf, n - size);
+ } else
+ ret = copy_to_user(*b, &ldata->read_buf[tail], n);
+
+ if (ret)
+ return -EFAULT;
+ *b += n;
+ *nr -= n;
+
+ raw_spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_tail = (ldata->read_tail + c) & (N_TTY_BUF_SIZE - 1);
+ ldata->read_cnt -= c;
+ if (found) {
+ __clear_bit(eol, ldata->read_flags);
+ /* this test should be redundant:
+ * we shouldn't be reading data if
+ * canon_data is 0
+ */
+ if (--ldata->canon_data < 0)
+ ldata->canon_data = 0;
}
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ if (found)
+ tty_audit_push(tty);
return 0;
}
@@ -1972,7 +2016,7 @@ do_it_again:
}
if (ldata->icanon && !L_EXTPROC(tty)) {
- retval = canon_copy_to_user(tty, &b, &nr);
+ retval = canon_copy_from_read_buf(tty, &b, &nr);
if (retval)
break;
} else {
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 06/24] n_tty: Split n_tty_chars_in_buffer() for reader-only interface
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (4 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 05/24] n_tty: Line copy to user buffer in canonical mode Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 07/24] tty: Deprecate ldisc .chars_in_buffer() method Peter Hurley
` (19 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
N_TTY .chars_in_buffer() method requires serialized access if
the current thread is not the single-consumer, n_tty_read().
Separate the internal interface; prepare for lockless read-side.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 74dcedd..594a3c1 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -277,7 +277,7 @@ static void n_tty_flush_buffer(struct tty_struct *tty)
* Locking: read_lock
*/
-static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
+static ssize_t chars_in_buffer(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
@@ -295,6 +295,11 @@ static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
return n;
}
+static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
+{
+ return chars_in_buffer(tty);
+}
+
/**
* is_utf8_continuation - utf8 multibyte check
* @c: byte to check
@@ -2032,7 +2037,7 @@ do_it_again:
}
/* If there is enough space in the read buffer now, let the
- * low-level driver know. We use n_tty_chars_in_buffer() to
+ * low-level driver know. We use chars_in_buffer() to
* check the buffer, as it now knows about canonical mode.
* Otherwise, if the driver is throttled and the line is
* longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode,
@@ -2040,7 +2045,7 @@ do_it_again:
*/
while (1) {
tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
- if (n_tty_chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
+ if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
break;
if (!tty->count)
break;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 07/24] tty: Deprecate ldisc .chars_in_buffer() method
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (5 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 06/24] n_tty: Split n_tty_chars_in_buffer() for reader-only interface Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 08/24] n_tty: Get read_cnt through accessor Peter Hurley
` (18 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 594a3c1..290769c 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -297,6 +297,7 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
{
+ WARN_ONCE(1, "%s is deprecated and scheduled for removal.", __func__);
return chars_in_buffer(tty);
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 08/24] n_tty: Get read_cnt through accessor
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (6 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 07/24] tty: Deprecate ldisc .chars_in_buffer() method Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 09/24] n_tty: Don't wrap input buffer indices at buffer size Peter Hurley
` (17 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Prepare for replacing read_cnt field with computed value.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 41 +++++++++++++++++++++++------------------
1 file changed, 23 insertions(+), 18 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 290769c..371612b 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -115,6 +115,11 @@ struct n_tty_data {
raw_spinlock_t read_lock;
};
+static inline size_t read_cnt(struct n_tty_data *ldata)
+{
+ return ldata->read_cnt;
+}
+
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
@@ -133,9 +138,9 @@ static int receive_room(struct tty_struct *tty)
/* Multiply read_cnt by 3, since each byte might take up to
* three times as many spaces when PARMRK is set (depending on
* its flags, e.g. parity error). */
- left = N_TTY_BUF_SIZE - ldata->read_cnt * 3 - 1;
+ left = N_TTY_BUF_SIZE - read_cnt(ldata) * 3 - 1;
} else
- left = N_TTY_BUF_SIZE - ldata->read_cnt - 1;
+ left = N_TTY_BUF_SIZE - read_cnt(ldata) - 1;
/*
* If we are doing input canonicalization, and there are no
@@ -180,7 +185,7 @@ static void n_tty_set_room(struct tty_struct *tty)
static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
{
- if (ldata->read_cnt < N_TTY_BUF_SIZE) {
+ if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
ldata->read_buf[ldata->read_head] = c;
ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
ldata->read_cnt++;
@@ -285,7 +290,7 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
raw_spin_lock_irqsave(&ldata->read_lock, flags);
if (!ldata->icanon) {
- n = ldata->read_cnt;
+ n = read_cnt(ldata);
} else if (ldata->canon_data) {
n = (ldata->canon_head > ldata->read_tail) ?
ldata->canon_head - ldata->read_tail :
@@ -1204,7 +1209,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
ldata->lnext = 0;
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
@@ -1304,7 +1309,7 @@ send_signal:
return;
}
if (c == '\n') {
- if (ldata->read_cnt >= N_TTY_BUF_SIZE) {
+ if (read_cnt(ldata) >= N_TTY_BUF_SIZE) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
@@ -1316,7 +1321,7 @@ send_signal:
goto handle_newline;
}
if (c == EOF_CHAR(tty)) {
- if (ldata->read_cnt >= N_TTY_BUF_SIZE)
+ if (read_cnt(ldata) >= N_TTY_BUF_SIZE)
return;
if (ldata->canon_head != ldata->read_head)
set_bit(TTY_PUSH, &tty->flags);
@@ -1327,7 +1332,7 @@ send_signal:
(c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
? 1 : 0;
- if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk)) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
@@ -1364,7 +1369,7 @@ handle_newline:
}
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
@@ -1430,7 +1435,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
if (ldata->real_raw) {
raw_spin_lock_irqsave(&ldata->read_lock, cpuflags);
- i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
memcpy(ldata->read_buf + ldata->read_head, cp, i);
@@ -1439,7 +1444,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
cp += i;
count -= i;
- i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
memcpy(ldata->read_buf + ldata->read_head, cp, i);
@@ -1474,7 +1479,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
tty->ops->flush_chars(tty);
}
- if ((!ldata->icanon && (ldata->read_cnt >= ldata->minimum_to_wake)) ||
+ if ((!ldata->icanon && (read_cnt(ldata) >= ldata->minimum_to_wake)) ||
L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
@@ -1552,7 +1557,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
ldata->erasing = 0;
}
- if (canon_change && !L_ICANON(tty) && ldata->read_cnt)
+ if (canon_change && !L_ICANON(tty) && read_cnt(ldata))
wake_up_interruptible(&tty->read_wait);
ldata->icanon = (L_ICANON(tty) != 0);
@@ -1701,7 +1706,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
if (ldata->icanon && !L_EXTPROC(tty)) {
if (ldata->canon_data)
return 1;
- } else if (ldata->read_cnt >= (amt ? amt : 1))
+ } else if (read_cnt(ldata) >= (amt ? amt : 1))
return 1;
return 0;
@@ -1737,7 +1742,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
retval = 0;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail);
+ n = min(read_cnt(ldata), N_TTY_BUF_SIZE - ldata->read_tail);
n = min(*nr, n);
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n) {
@@ -1751,7 +1756,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
ldata->read_cnt -= n;
/* Turn single EOF into zero-length read */
- if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt)
+ if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
n = 0;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
*b += n;
@@ -1787,7 +1792,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- n = min_t(size_t, *nr, ldata->read_cnt);
+ n = min(*nr, read_cnt(ldata));
if (!n) {
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
return 0;
@@ -2253,7 +2258,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
/* FIXME: Locking */
- retval = ldata->read_cnt;
+ retval = read_cnt(ldata);
if (L_ICANON(tty))
retval = inq_canon(ldata);
return put_user(retval, (unsigned int __user *) arg);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 09/24] n_tty: Don't wrap input buffer indices at buffer size
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (7 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 08/24] n_tty: Get read_cnt through accessor Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 10/24] n_tty: Remove read_cnt Peter Hurley
` (16 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Wrap read_buf indices (read_head, read_tail, canon_head) at
max representable value, instead of at the N_TTY_BUF_SIZE. This step
is necessary to allow lockless reads of these shared variables
(by updating the variables atomically).
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 111 ++++++++++++++++++++++++++++------------------------
1 file changed, 60 insertions(+), 51 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 371612b..b2fef10 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -96,8 +96,8 @@ struct n_tty_data {
DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
char *read_buf;
- int read_head;
- int read_tail;
+ size_t read_head;
+ size_t read_tail;
int read_cnt;
int minimum_to_wake;
@@ -106,7 +106,7 @@ struct n_tty_data {
unsigned int echo_cnt;
int canon_data;
- unsigned long canon_head;
+ size_t canon_head;
unsigned int canon_column;
struct mutex atomic_read_lock;
@@ -120,6 +120,16 @@ static inline size_t read_cnt(struct n_tty_data *ldata)
return ldata->read_cnt;
}
+static inline unsigned char read_buf(struct n_tty_data *ldata, size_t i)
+{
+ return ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)];
+}
+
+static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i)
+{
+ return &ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)];
+}
+
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
@@ -186,8 +196,8 @@ static void n_tty_set_room(struct tty_struct *tty)
static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
{
if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
- ldata->read_buf[ldata->read_head] = c;
- ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
+ *read_buf_addr(ldata, ldata->read_head) = c;
+ ldata->read_head++;
ldata->read_cnt++;
}
}
@@ -289,13 +299,10 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
ssize_t n = 0;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- if (!ldata->icanon) {
+ if (!ldata->icanon)
n = read_cnt(ldata);
- } else if (ldata->canon_data) {
- n = (ldata->canon_head > ldata->read_tail) ?
- ldata->canon_head - ldata->read_tail :
- ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail);
- }
+ else
+ n = ldata->canon_head - ldata->read_tail;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
return n;
}
@@ -918,7 +925,9 @@ static void eraser(unsigned char c, struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
enum { ERASE, WERASE, KILL } kill_type;
- int head, seen_alnums, cnt;
+ size_t head;
+ size_t cnt;
+ int seen_alnums;
unsigned long flags;
/* FIXME: locking needed ? */
@@ -962,8 +971,8 @@ static void eraser(unsigned char c, struct tty_struct *tty)
/* erase a single possibly multibyte character */
do {
- head = (head - 1) & (N_TTY_BUF_SIZE-1);
- c = ldata->read_buf[head];
+ head--;
+ c = read_buf(ldata, head);
} while (is_continuation(c, tty) && head != ldata->canon_head);
/* do not partially erase */
@@ -977,7 +986,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
else if (seen_alnums)
break;
}
- cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1);
+ cnt = ldata->read_head - head;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = head;
ldata->read_cnt -= cnt;
@@ -991,9 +1000,8 @@ static void eraser(unsigned char c, struct tty_struct *tty)
/* if cnt > 1, output a multi-byte character */
echo_char(c, tty);
while (--cnt > 0) {
- head = (head+1) & (N_TTY_BUF_SIZE-1);
- echo_char_raw(ldata->read_buf[head],
- ldata);
+ head++;
+ echo_char_raw(read_buf(ldata, head), ldata);
echo_move_back_col(ldata);
}
} else if (kill_type == ERASE && !L_ECHOE(tty)) {
@@ -1001,7 +1009,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
} else if (c == '\t') {
unsigned int num_chars = 0;
int after_tab = 0;
- unsigned long tail = ldata->read_head;
+ size_t tail = ldata->read_head;
/*
* Count the columns used for characters
@@ -1011,8 +1019,8 @@ static void eraser(unsigned char c, struct tty_struct *tty)
* number of columns.
*/
while (tail != ldata->canon_head) {
- tail = (tail-1) & (N_TTY_BUF_SIZE-1);
- c = ldata->read_buf[tail];
+ tail--;
+ c = read_buf(ldata, tail);
if (c == '\t') {
after_tab = 1;
break;
@@ -1296,14 +1304,14 @@ send_signal:
}
if (c == REPRINT_CHAR(tty) && L_ECHO(tty) &&
L_IEXTEN(tty)) {
- unsigned long tail = ldata->canon_head;
+ size_t tail = ldata->canon_head;
finish_erasing(ldata);
echo_char(c, tty);
echo_char_raw('\n', ldata);
while (tail != ldata->read_head) {
- echo_char(ldata->read_buf[tail], tty);
- tail = (tail+1) & (N_TTY_BUF_SIZE-1);
+ echo_char(read_buf(ldata, tail), tty);
+ tail++;
}
process_echoes(tty);
return;
@@ -1356,7 +1364,7 @@ send_signal:
handle_newline:
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- set_bit(ldata->read_head, ldata->read_flags);
+ set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags);
put_tty_queue_nolock(c, ldata);
ldata->canon_head = ldata->read_head;
ldata->canon_data++;
@@ -1436,19 +1444,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
if (ldata->real_raw) {
raw_spin_lock_irqsave(&ldata->read_lock, cpuflags);
i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
- N_TTY_BUF_SIZE - ldata->read_head);
+ N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1)));
i = min(count, i);
- memcpy(ldata->read_buf + ldata->read_head, cp, i);
- ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
+ ldata->read_head += i;
ldata->read_cnt += i;
cp += i;
count -= i;
i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
- N_TTY_BUF_SIZE - ldata->read_head);
+ N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1)));
i = min(count, i);
- memcpy(ldata->read_buf + ldata->read_head, cp, i);
- ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
+ ldata->read_head += i;
ldata->read_cnt += i;
raw_spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
} else {
@@ -1739,21 +1747,21 @@ static int copy_from_read_buf(struct tty_struct *tty,
size_t n;
unsigned long flags;
bool is_eof;
+ size_t tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
retval = 0;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- n = min(read_cnt(ldata), N_TTY_BUF_SIZE - ldata->read_tail);
+ n = min(read_cnt(ldata), N_TTY_BUF_SIZE - tail);
n = min(*nr, n);
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n) {
- retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n);
+ retval = copy_to_user(*b, read_buf_addr(ldata, tail), n);
n -= retval;
- is_eof = n == 1 &&
- ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty);
- tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n,
+ is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty);
+ tty_audit_add_data(tty, read_buf_addr(ldata, tail), n,
ldata->icanon);
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
+ ldata->read_tail += n;
ldata->read_cnt -= n;
/* Turn single EOF into zero-length read */
if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
@@ -1785,8 +1793,9 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
size_t n, size, more, c;
- unsigned long eol;
- int ret, tail, found = 0;
+ size_t eol;
+ size_t tail;
+ int ret, found = 0;
/* N.B. avoid overrun if nr == 0 */
@@ -1798,10 +1807,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
return 0;
}
- tail = ldata->read_tail;
+ tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
size = min_t(size_t, tail + n, N_TTY_BUF_SIZE);
- n_tty_trace("%s: nr:%zu tail:%d n:%zu size:%zu\n",
+ n_tty_trace("%s: nr:%zu tail:%zu n:%zu size:%zu\n",
__func__, *nr, tail, n, size);
eol = find_next_bit(ldata->read_flags, size, tail);
@@ -1818,21 +1827,21 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
n = (found + eol + size) & (N_TTY_BUF_SIZE - 1);
c = n;
- if (found && ldata->read_buf[eol] == __DISABLED_CHAR)
+ if (found && read_buf(ldata, eol) == __DISABLED_CHAR)
n--;
- n_tty_trace("%s: eol:%lu found:%d n:%zu c:%zu size:%zu more:%zu\n",
+ n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu size:%zu more:%zu\n",
__func__, eol, found, n, c, size, more);
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n > size) {
- ret = copy_to_user(*b, &ldata->read_buf[tail], size);
+ ret = copy_to_user(*b, read_buf_addr(ldata, tail), size);
if (ret)
return -EFAULT;
ret = copy_to_user(*b + size, ldata->read_buf, n - size);
} else
- ret = copy_to_user(*b, &ldata->read_buf[tail], n);
+ ret = copy_to_user(*b, read_buf_addr(ldata, tail), n);
if (ret)
return -EFAULT;
@@ -1840,7 +1849,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
*nr -= n;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_tail = (ldata->read_tail + c) & (N_TTY_BUF_SIZE - 1);
+ ldata->read_tail += c;
ldata->read_cnt -= c;
if (found) {
__clear_bit(eol, ldata->read_flags);
@@ -2230,19 +2239,19 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
static unsigned long inq_canon(struct n_tty_data *ldata)
{
- int nr, head, tail;
+ size_t nr, head, tail;
if (!ldata->canon_data)
return 0;
head = ldata->canon_head;
tail = ldata->read_tail;
- nr = (head - tail) & (N_TTY_BUF_SIZE-1);
+ nr = head - tail;
/* Skip EOF-chars.. */
while (head != tail) {
- if (test_bit(tail, ldata->read_flags) &&
- ldata->read_buf[tail] == __DISABLED_CHAR)
+ if (test_bit(tail & (N_TTY_BUF_SIZE - 1), ldata->read_flags) &&
+ read_buf(ldata, tail) == __DISABLED_CHAR)
nr--;
- tail = (tail+1) & (N_TTY_BUF_SIZE-1);
+ tail++;
}
return nr;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 10/24] n_tty: Remove read_cnt
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (8 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 09/24] n_tty: Don't wrap input buffer indices at buffer size Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 11/24] tty: Convert termios_mutex to termios_rwsem Peter Hurley
` (15 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Storing the read_cnt creates an unnecessary shared variable
between the single-producer (n_tty_receive_buf()) and the
single-consumer (n_tty_read()).
Compute read_cnt from head & tail instead of storing.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index b2fef10..d159059 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -98,7 +98,6 @@ struct n_tty_data {
char *read_buf;
size_t read_head;
size_t read_tail;
- int read_cnt;
int minimum_to_wake;
unsigned char *echo_buf;
@@ -117,7 +116,7 @@ struct n_tty_data {
static inline size_t read_cnt(struct n_tty_data *ldata)
{
- return ldata->read_cnt;
+ return ldata->read_head - ldata->read_tail;
}
static inline unsigned char read_buf(struct n_tty_data *ldata, size_t i)
@@ -198,7 +197,6 @@ static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
*read_buf_addr(ldata, ldata->read_head) = c;
ldata->read_head++;
- ldata->read_cnt++;
}
}
@@ -239,7 +237,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
unsigned long flags;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_head = ldata->read_tail = ldata->read_cnt = 0;
+ ldata->read_head = ldata->read_tail = 0;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
mutex_lock(&ldata->echo_lock);
@@ -942,16 +940,12 @@ static void eraser(unsigned char c, struct tty_struct *tty)
else {
if (!L_ECHO(tty)) {
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
- (N_TTY_BUF_SIZE - 1));
ldata->read_head = ldata->canon_head;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
return;
}
if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
- (N_TTY_BUF_SIZE - 1));
ldata->read_head = ldata->canon_head;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
finish_erasing(ldata);
@@ -989,7 +983,6 @@ static void eraser(unsigned char c, struct tty_struct *tty)
cnt = ldata->read_head - head;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = head;
- ldata->read_cnt -= cnt;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
@@ -1448,7 +1441,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
i = min(count, i);
memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
ldata->read_head += i;
- ldata->read_cnt += i;
cp += i;
count -= i;
@@ -1457,7 +1449,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
i = min(count, i);
memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
ldata->read_head += i;
- ldata->read_cnt += i;
raw_spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
} else {
for (i = count, p = cp, f = fp; i; i--, p++) {
@@ -1762,7 +1753,6 @@ static int copy_from_read_buf(struct tty_struct *tty,
ldata->icanon);
raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_tail += n;
- ldata->read_cnt -= n;
/* Turn single EOF into zero-length read */
if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
n = 0;
@@ -1850,7 +1840,6 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_tail += c;
- ldata->read_cnt -= c;
if (found) {
__clear_bit(eol, ldata->read_flags);
/* this test should be redundant:
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 11/24] tty: Convert termios_mutex to termios_rwsem
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (9 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 10/24] n_tty: Remove read_cnt Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 12/24] n_tty: Access termios values safely Peter Hurley
` (14 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
termios is commonly accessed unsafely (especially by N_TTY)
because the existing mutex forces exclusive access.
Convert existing usage.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/net/irda/irtty-sir.c | 8 ++--
drivers/tty/n_tty.c | 2 +-
drivers/tty/pty.c | 4 +-
drivers/tty/tty_io.c | 14 +++----
drivers/tty/tty_ioctl.c | 90 ++++++++++++++++++++++----------------------
drivers/tty/tty_ldisc.c | 10 ++---
drivers/tty/vt/vt.c | 4 +-
include/linux/tty.h | 7 ++--
8 files changed, 70 insertions(+), 69 deletions(-)
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index a412671..177441a 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -123,14 +123,14 @@ static int irtty_change_speed(struct sir_dev *dev, unsigned speed)
tty = priv->tty;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
old_termios = tty->termios;
cflag = tty->termios.c_cflag;
tty_encode_baud_rate(tty, speed, speed);
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old_termios);
priv->io.speed = speed;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
@@ -280,7 +280,7 @@ static inline void irtty_stop_receiver(struct tty_struct *tty, int stop)
struct ktermios old_termios;
int cflag;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
old_termios = tty->termios;
cflag = tty->termios.c_cflag;
@@ -292,7 +292,7 @@ static inline void irtty_stop_receiver(struct tty_struct *tty, int stop)
tty->termios.c_cflag = cflag;
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old_termios);
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
}
/*****************************************************************/
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d159059..ab923bb 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1539,7 +1539,7 @@ int is_ignored(int sig)
* guaranteed that this function will not be re-entered or in progress
* when the ldisc is closed.
*
- * Locking: Caller holds tty->termios_mutex
+ * Locking: Caller holds tty->termios_rwsem
*/
static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 59bfaec..bbd9693 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -290,7 +290,7 @@ static int pty_resize(struct tty_struct *tty, struct winsize *ws)
struct tty_struct *pty = tty->link;
/* For a PTY we need to lock the tty side */
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
goto done;
@@ -317,7 +317,7 @@ static int pty_resize(struct tty_struct *tty, struct winsize *ws)
tty->winsize = *ws;
pty->winsize = *ws; /* Never used so will go away soon */
done:
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 6cd08d9..1cec782 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -604,7 +604,7 @@ static int tty_signal_session_leader(struct tty_struct *tty, int exit_session)
* redirect lock for undoing redirection
* file list lock for manipulating list of ttys
* tty_ldiscs_lock from called functions
- * termios_mutex resetting termios data
+ * termios_rwsem resetting termios data
* tasklist_lock to walk task list for hangup event
* ->siglock to protect ->signal/->sighand
*/
@@ -2228,7 +2228,7 @@ static int tiocsti(struct tty_struct *tty, char __user *p)
*
* Copies the kernel idea of the window size into the user buffer.
*
- * Locking: tty->termios_mutex is taken to ensure the winsize data
+ * Locking: tty->termios_rwsem is taken to ensure the winsize data
* is consistent.
*/
@@ -2236,9 +2236,9 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
{
int err;
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
err = copy_to_user(arg, &tty->winsize, sizeof(*arg));
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
return err ? -EFAULT: 0;
}
@@ -2259,7 +2259,7 @@ int tty_do_resize(struct tty_struct *tty, struct winsize *ws)
unsigned long flags;
/* Lock the tty */
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
goto done;
/* Get the PID values and reference them so we can
@@ -2274,7 +2274,7 @@ int tty_do_resize(struct tty_struct *tty, struct winsize *ws)
tty->winsize = *ws;
done:
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
EXPORT_SYMBOL(tty_do_resize);
@@ -3013,7 +3013,7 @@ void initialize_tty_struct(struct tty_struct *tty,
tty->session = NULL;
tty->pgrp = NULL;
mutex_init(&tty->legacy_mutex);
- mutex_init(&tty->termios_mutex);
+ init_rwsem(&tty->termios_rwsem);
init_ldsem(&tty->ldisc_sem);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 3500d41..9ce20df 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -94,20 +94,20 @@ EXPORT_SYMBOL(tty_driver_flush_buffer);
* @tty: terminal
*
* Indicate that a tty should stop transmitting data down the stack.
- * Takes the termios mutex to protect against parallel throttle/unthrottle
+ * Takes the termios rwsem to protect against parallel throttle/unthrottle
* and also to ensure the driver can consistently reference its own
* termios data at this point when implementing software flow control.
*/
void tty_throttle(struct tty_struct *tty)
{
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
/* check TTY_THROTTLED first so it indicates our state */
if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) &&
tty->ops->throttle)
tty->ops->throttle(tty);
tty->flow_change = 0;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
}
EXPORT_SYMBOL(tty_throttle);
@@ -116,7 +116,7 @@ EXPORT_SYMBOL(tty_throttle);
* @tty: terminal
*
* Indicate that a tty may continue transmitting data down the stack.
- * Takes the termios mutex to protect against parallel throttle/unthrottle
+ * Takes the termios rwsem to protect against parallel throttle/unthrottle
* and also to ensure the driver can consistently reference its own
* termios data at this point when implementing software flow control.
*
@@ -126,12 +126,12 @@ EXPORT_SYMBOL(tty_throttle);
void tty_unthrottle(struct tty_struct *tty)
{
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
tty->ops->unthrottle)
tty->ops->unthrottle(tty);
tty->flow_change = 0;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
}
EXPORT_SYMBOL(tty_unthrottle);
@@ -151,7 +151,7 @@ int tty_throttle_safe(struct tty_struct *tty)
{
int ret = 0;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (!test_bit(TTY_THROTTLED, &tty->flags)) {
if (tty->flow_change != TTY_THROTTLE_SAFE)
ret = 1;
@@ -161,7 +161,7 @@ int tty_throttle_safe(struct tty_struct *tty)
tty->ops->throttle(tty);
}
}
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return ret;
}
@@ -182,7 +182,7 @@ int tty_unthrottle_safe(struct tty_struct *tty)
{
int ret = 0;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (test_bit(TTY_THROTTLED, &tty->flags)) {
if (tty->flow_change != TTY_UNTHROTTLE_SAFE)
ret = 1;
@@ -192,7 +192,7 @@ int tty_unthrottle_safe(struct tty_struct *tty)
tty->ops->unthrottle(tty);
}
}
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return ret;
}
@@ -468,7 +468,7 @@ EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
* @obad: output baud rate
*
* Update the current termios data for the tty with the new speed
- * settings. The caller must hold the termios_mutex for the tty in
+ * settings. The caller must hold the termios_rwsem for the tty in
* question.
*/
@@ -528,7 +528,7 @@ EXPORT_SYMBOL(tty_termios_hw_change);
* is a bit of layering violation here with n_tty in terms of the
* internal knowledge of this function.
*
- * Locking: termios_mutex
+ * Locking: termios_rwsem
*/
int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
@@ -544,7 +544,7 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
/* FIXME: we need to decide on some locking/ordering semantics
for the set_termios notification eventually */
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
old_termios = tty->termios;
tty->termios = *new_termios;
unset_locked_termios(&tty->termios, &old_termios, &tty->termios_locked);
@@ -586,7 +586,7 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
(ld->ops->set_termios)(tty, &old_termios);
tty_ldisc_deref(ld);
}
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
EXPORT_SYMBOL_GPL(tty_set_termios);
@@ -601,7 +601,7 @@ EXPORT_SYMBOL_GPL(tty_set_termios);
* functions before using tty_set_termios to do the actual changes.
*
* Locking:
- * Called functions take ldisc and termios_mutex locks
+ * Called functions take ldisc and termios_rwsem locks
*/
static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
@@ -613,9 +613,9 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
if (retval)
return retval;
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
tmp_termios = tty->termios;
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
if (opt & TERMIOS_TERMIO) {
if (user_termio_to_kernel_termios(&tmp_termios,
@@ -667,16 +667,16 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
static void copy_termios(struct tty_struct *tty, struct ktermios *kterm)
{
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
*kterm = tty->termios;
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
}
static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm)
{
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
*kterm = tty->termios_locked;
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
}
static int get_termio(struct tty_struct *tty, struct termio __user *termio)
@@ -723,10 +723,10 @@ static int set_termiox(struct tty_struct *tty, void __user *arg, int opt)
return -ERESTARTSYS;
}
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
if (tty->ops->set_termiox)
tty->ops->set_termiox(tty, &tnew);
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
@@ -761,13 +761,13 @@ static int get_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
{
struct sgttyb tmp;
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
tmp.sg_ispeed = tty->termios.c_ispeed;
tmp.sg_ospeed = tty->termios.c_ospeed;
tmp.sg_erase = tty->termios.c_cc[VERASE];
tmp.sg_kill = tty->termios.c_cc[VKILL];
tmp.sg_flags = get_sgflags(tty);
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
return copy_to_user(sgttyb, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -806,7 +806,7 @@ static void set_sgflags(struct ktermios *termios, int flags)
* Updates a terminal from the legacy BSD style terminal information
* structure.
*
- * Locking: termios_mutex
+ * Locking: termios_rwsem
*/
static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
@@ -822,7 +822,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
if (copy_from_user(&tmp, sgttyb, sizeof(tmp)))
return -EFAULT;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
termios = tty->termios;
termios.c_cc[VERASE] = tmp.sg_erase;
termios.c_cc[VKILL] = tmp.sg_kill;
@@ -832,7 +832,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
tty_termios_encode_baud_rate(&termios, termios.c_ispeed,
termios.c_ospeed);
#endif
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
tty_set_termios(tty, &termios);
return 0;
}
@@ -843,14 +843,14 @@ static int get_tchars(struct tty_struct *tty, struct tchars __user *tchars)
{
struct tchars tmp;
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
tmp.t_intrc = tty->termios.c_cc[VINTR];
tmp.t_quitc = tty->termios.c_cc[VQUIT];
tmp.t_startc = tty->termios.c_cc[VSTART];
tmp.t_stopc = tty->termios.c_cc[VSTOP];
tmp.t_eofc = tty->termios.c_cc[VEOF];
tmp.t_brkc = tty->termios.c_cc[VEOL2]; /* what is brkc anyway? */
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -860,14 +860,14 @@ static int set_tchars(struct tty_struct *tty, struct tchars __user *tchars)
if (copy_from_user(&tmp, tchars, sizeof(tmp)))
return -EFAULT;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
tty->termios.c_cc[VINTR] = tmp.t_intrc;
tty->termios.c_cc[VQUIT] = tmp.t_quitc;
tty->termios.c_cc[VSTART] = tmp.t_startc;
tty->termios.c_cc[VSTOP] = tmp.t_stopc;
tty->termios.c_cc[VEOF] = tmp.t_eofc;
tty->termios.c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
#endif
@@ -877,7 +877,7 @@ static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
{
struct ltchars tmp;
- mutex_lock(&tty->termios_mutex);
+ down_read(&tty->termios_rwsem);
tmp.t_suspc = tty->termios.c_cc[VSUSP];
/* what is dsuspc anyway? */
tmp.t_dsuspc = tty->termios.c_cc[VSUSP];
@@ -886,7 +886,7 @@ static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
tmp.t_flushc = tty->termios.c_cc[VEOL2];
tmp.t_werasc = tty->termios.c_cc[VWERASE];
tmp.t_lnextc = tty->termios.c_cc[VLNEXT];
- mutex_unlock(&tty->termios_mutex);
+ up_read(&tty->termios_rwsem);
return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -897,7 +897,7 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
if (copy_from_user(&tmp, ltchars, sizeof(tmp)))
return -EFAULT;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
tty->termios.c_cc[VSUSP] = tmp.t_suspc;
/* what is dsuspc anyway? */
tty->termios.c_cc[VEOL2] = tmp.t_dsuspc;
@@ -906,7 +906,7 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
tty->termios.c_cc[VEOL2] = tmp.t_flushc;
tty->termios.c_cc[VWERASE] = tmp.t_werasc;
tty->termios.c_cc[VLNEXT] = tmp.t_lnextc;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return 0;
}
#endif
@@ -946,7 +946,7 @@ static int send_prio_char(struct tty_struct *tty, char ch)
* @arg: enable/disable CLOCAL
*
* Perform a change to the CLOCAL state and call into the driver
- * layer to make it visible. All done with the termios mutex
+ * layer to make it visible. All done with the termios rwsem
*/
static int tty_change_softcar(struct tty_struct *tty, int arg)
@@ -955,7 +955,7 @@ static int tty_change_softcar(struct tty_struct *tty, int arg)
int bit = arg ? CLOCAL : 0;
struct ktermios old;
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
old = tty->termios;
tty->termios.c_cflag &= ~CLOCAL;
tty->termios.c_cflag |= bit;
@@ -963,7 +963,7 @@ static int tty_change_softcar(struct tty_struct *tty, int arg)
tty->ops->set_termios(tty, &old);
if ((tty->termios.c_cflag & CLOCAL) != bit)
ret = -EINVAL;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
return ret;
}
@@ -1066,9 +1066,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
if (user_termios_to_kernel_termios(&kterm,
(struct termios __user *) arg))
return -EFAULT;
- mutex_lock(&real_tty->termios_mutex);
+ down_write(&real_tty->termios_rwsem);
real_tty->termios_locked = kterm;
- mutex_unlock(&real_tty->termios_mutex);
+ up_write(&real_tty->termios_rwsem);
return 0;
#else
case TIOCGLCKTRMIOS:
@@ -1083,9 +1083,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
if (user_termios_to_kernel_termios_1(&kterm,
(struct termios __user *) arg))
return -EFAULT;
- mutex_lock(&real_tty->termios_mutex);
+ down_write(&real_tty->termios_rwsem);
real_tty->termios_locked = kterm;
- mutex_unlock(&real_tty->termios_mutex);
+ up_write(&real_tty->termios_rwsem);
return ret;
#endif
#ifdef TCGETX
@@ -1093,9 +1093,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
struct termiox ktermx;
if (real_tty->termiox == NULL)
return -EINVAL;
- mutex_lock(&real_tty->termios_mutex);
+ down_read(&real_tty->termios_rwsem);
memcpy(&ktermx, real_tty->termiox, sizeof(struct termiox));
- mutex_unlock(&real_tty->termios_mutex);
+ up_read(&real_tty->termios_rwsem);
if (copy_to_user(p, &ktermx, sizeof(struct termiox)))
ret = -EFAULT;
return ret;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 86356e3..56cd044 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -415,14 +415,14 @@ EXPORT_SYMBOL_GPL(tty_ldisc_flush);
* they are not on hot paths so a little discipline won't do
* any harm.
*
- * Locking: takes termios_mutex
+ * Locking: takes termios_rwsem
*/
static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
{
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
tty->termios.c_line = num;
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
}
/**
@@ -602,11 +602,11 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
static void tty_reset_termios(struct tty_struct *tty)
{
- mutex_lock(&tty->termios_mutex);
+ down_write(&tty->termios_rwsem);
tty->termios = tty->driver->init_termios;
tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
- mutex_unlock(&tty->termios_mutex);
+ up_write(&tty->termios_rwsem);
}
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index c677829..02af6cc 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -828,7 +828,7 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
* If the caller passes a tty structure then update the termios winsize
* information and perform any necessary signal handling.
*
- * Caller must hold the console semaphore. Takes the termios mutex and
+ * Caller must hold the console semaphore. Takes the termios rwsem and
* ctrl_lock of the tty IFF a tty is passed.
*/
@@ -972,7 +972,7 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows)
* the actual work.
*
* Takes the console sem and the called methods then take the tty
- * termios_mutex and the tty ctrl_lock in that order.
+ * termios_rwsem and the tty ctrl_lock in that order.
*/
static int vt_resize(struct tty_struct *tty, struct winsize *ws)
{
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 8323ee4..d304207 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -10,6 +10,7 @@
#include <linux/mutex.h>
#include <linux/tty_flags.h>
#include <uapi/linux/tty.h>
+#include <linux/rwsem.h>
@@ -243,9 +244,9 @@ struct tty_struct {
struct mutex atomic_write_lock;
struct mutex legacy_mutex;
- struct mutex termios_mutex;
+ struct rw_semaphore termios_rwsem;
spinlock_t ctrl_lock;
- /* Termios values are protected by the termios mutex */
+ /* Termios values are protected by the termios rwsem */
struct ktermios termios, termios_locked;
struct termiox *termiox; /* May be NULL for unsupported */
char name[64];
@@ -253,7 +254,7 @@ struct tty_struct {
struct pid *session;
unsigned long flags;
int count;
- struct winsize winsize; /* termios mutex */
+ struct winsize winsize; /* termios rwsem */
unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1;
unsigned char ctrl_status; /* ctrl_lock */
unsigned int receive_room; /* Bytes free for queue */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 12/24] n_tty: Access termios values safely
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (10 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 11/24] tty: Convert termios_mutex to termios_rwsem Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 13/24] n_tty: Replace canon_data with index comparison Peter Hurley
` (13 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Use termios_rwsem to guarantee safe access to the termios values.
This is particularly important for N_TTY as changing certain termios
settings alters the mode of operation.
termios_rwsem must be dropped across throttle/unthrottle since
those functions claim the termios_rwsem exclusively (to guarantee
safe access to the termios and for mutual exclusion).
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 44 +++++++++++++++++++++++++++++++++++++++-----
1 file changed, 39 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index ab923bb..0599b58 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1491,10 +1491,14 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
* canonical mode and don't have a newline yet!
*/
while (1) {
+ int throttled;
tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE)
break;
- if (!tty_throttle_safe(tty))
+ up_read(&tty->termios_rwsem);
+ throttled = tty_throttle_safe(tty);
+ down_read(&tty->termios_rwsem);
+ if (!throttled)
break;
}
__tty_set_flow_change(tty, 0);
@@ -1503,7 +1507,9 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ down_read(&tty->termios_rwsem);
__receive_buf(tty, cp, fp, count);
+ up_read(&tty->termios_rwsem);
}
static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
@@ -1512,6 +1518,8 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
struct n_tty_data *ldata = tty->disc_data;
int room;
+ down_read(&tty->termios_rwsem);
+
tty->receive_room = room = receive_room(tty);
if (!room)
ldata->no_room = 1;
@@ -1519,6 +1527,8 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
if (count)
__receive_buf(tty, cp, fp, count);
+ up_read(&tty->termios_rwsem);
+
return count;
}
@@ -1934,6 +1944,8 @@ do_it_again:
if (c < 0)
return c;
+ down_read(&tty->termios_rwsem);
+
minimum = time = 0;
timeout = MAX_SCHEDULE_TIMEOUT;
if (!ldata->icanon) {
@@ -1955,11 +1967,15 @@ do_it_again:
* Internal serialization of reads.
*/
if (file->f_flags & O_NONBLOCK) {
- if (!mutex_trylock(&ldata->atomic_read_lock))
+ if (!mutex_trylock(&ldata->atomic_read_lock)) {
+ up_read(&tty->termios_rwsem);
return -EAGAIN;
+ }
} else {
- if (mutex_lock_interruptible(&ldata->atomic_read_lock))
+ if (mutex_lock_interruptible(&ldata->atomic_read_lock)) {
+ up_read(&tty->termios_rwsem);
return -ERESTARTSYS;
+ }
}
packet = tty->packet;
@@ -2009,7 +2025,11 @@ do_it_again:
break;
}
n_tty_set_room(tty);
+ up_read(&tty->termios_rwsem);
+
timeout = schedule_timeout(timeout);
+
+ down_read(&tty->termios_rwsem);
continue;
}
__set_current_state(TASK_RUNNING);
@@ -2048,13 +2068,17 @@ do_it_again:
* we won't get any more characters.
*/
while (1) {
+ int unthrottled;
tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
break;
if (!tty->count)
break;
n_tty_set_room(tty);
- if (!tty_unthrottle_safe(tty))
+ up_read(&tty->termios_rwsem);
+ unthrottled = tty_unthrottle_safe(tty);
+ down_read(&tty->termios_rwsem);
+ if (!unthrottled)
break;
}
__tty_set_flow_change(tty, 0);
@@ -2076,10 +2100,13 @@ do_it_again:
retval = size;
if (nr)
clear_bit(TTY_PUSH, &tty->flags);
- } else if (test_and_clear_bit(TTY_PUSH, &tty->flags))
+ } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) {
+ up_read(&tty->termios_rwsem);
goto do_it_again;
+ }
n_tty_set_room(tty);
+ up_read(&tty->termios_rwsem);
return retval;
}
@@ -2120,6 +2147,8 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
return retval;
}
+ down_read(&tty->termios_rwsem);
+
/* Write out any echoed characters that are still pending */
process_echoes(tty);
@@ -2173,13 +2202,18 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
retval = -EAGAIN;
break;
}
+ up_read(&tty->termios_rwsem);
+
schedule();
+
+ down_read(&tty->termios_rwsem);
}
break_out:
__set_current_state(TASK_RUNNING);
remove_wait_queue(&tty->write_wait, &wait);
if (b - buf != nr && tty->fasync)
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ up_read(&tty->termios_rwsem);
return (b - buf) ? b - buf : retval;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 13/24] n_tty: Replace canon_data with index comparison
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (11 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 12/24] n_tty: Access termios values safely Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 14/24] n_tty: Make N_TTY ldisc receive path lockless Peter Hurley
` (12 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
canon_data represented the # of lines which had been copied
to the receive buffer but not yet copied to the user buffer.
The value was tested to determine if input was available in
canonical mode (and also to force input overrun if the
receive buffer was full but a newline had not been received).
However, the actual count was irrelevent; only whether it was
non-zero (meaning 'is there any input to transfer?'). This
shared count is unnecessary and unsafe with a lockless algorithm.
The same check is made by comparing canon_head with read_tail instead.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0599b58..1098dd7 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -104,7 +104,6 @@ struct n_tty_data {
unsigned int echo_pos;
unsigned int echo_cnt;
- int canon_data;
size_t canon_head;
unsigned int canon_column;
@@ -158,7 +157,7 @@ static int receive_room(struct tty_struct *tty)
* characters will be beeped.
*/
if (left <= 0)
- left = ldata->icanon && !ldata->canon_data;
+ left = ldata->icanon && ldata->canon_head == ldata->read_tail;
return left;
}
@@ -237,14 +236,14 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
unsigned long flags;
raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_head = ldata->read_tail = 0;
+ ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
mutex_lock(&ldata->echo_lock);
ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
mutex_unlock(&ldata->echo_lock);
- ldata->canon_head = ldata->canon_data = ldata->erasing = 0;
+ ldata->erasing = 0;
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
}
@@ -1360,7 +1359,6 @@ handle_newline:
set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags);
put_tty_queue_nolock(c, ldata);
ldata->canon_head = ldata->read_head;
- ldata->canon_data++;
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
@@ -1562,7 +1560,6 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
if (canon_change) {
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
ldata->canon_head = ldata->read_tail;
- ldata->canon_data = 0;
ldata->erasing = 0;
}
@@ -1713,7 +1710,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
tty_flush_to_ldisc(tty);
if (ldata->icanon && !L_EXTPROC(tty)) {
- if (ldata->canon_data)
+ if (ldata->canon_head != ldata->read_tail)
return 1;
} else if (read_cnt(ldata) >= (amt ? amt : 1))
return 1;
@@ -1850,15 +1847,8 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_tail += c;
- if (found) {
+ if (found)
__clear_bit(eol, ldata->read_flags);
- /* this test should be redundant:
- * we shouldn't be reading data if
- * canon_data is 0
- */
- if (--ldata->canon_data < 0)
- ldata->canon_data = 0;
- }
raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (found)
@@ -2264,7 +2254,7 @@ static unsigned long inq_canon(struct n_tty_data *ldata)
{
size_t nr, head, tail;
- if (!ldata->canon_data)
+ if (ldata->canon_head == ldata->read_tail)
return 0;
head = ldata->canon_head;
tail = ldata->read_tail;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 14/24] n_tty: Make N_TTY ldisc receive path lockless
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (12 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 13/24] n_tty: Replace canon_data with index comparison Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 15/24] n_tty: Reset lnext if canonical mode changes Peter Hurley
` (11 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
n_tty has a single-producer/single-consumer input model;
use lockless publish instead.
Use termios_rwsem to exclude both consumer and producer while
changing or resetting buffer indices, eg., when flushing. Also,
claim exclusive termios_rwsem to safely retrieve the buffer
indices from a thread other than consumer or producer
(eg., TIOCINQ ioctl).
Note the read_tail is published _after_ clearing the newline
indicator in read_flags to avoid racing the producer.
Drop read_lock spinlock.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 173 ++++++++++++++++++++++++++++------------------------
1 file changed, 92 insertions(+), 81 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 1098dd7..c7f71cb 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -110,7 +110,6 @@ struct n_tty_data {
struct mutex atomic_read_lock;
struct mutex output_lock;
struct mutex echo_lock;
- raw_spinlock_t read_lock;
};
static inline size_t read_cnt(struct n_tty_data *ldata)
@@ -168,7 +167,10 @@ static int receive_room(struct tty_struct *tty)
*
* Re-schedules the flip buffer work if space just became available.
*
- * Locks: Concurrent update is protected with read_lock
+ * Caller holds exclusive termios_rwsem
+ * or
+ * n_tty_read()/consumer path:
+ * holds non-exclusive termios_rwsem
*/
static void n_tty_set_room(struct tty_struct *tty)
@@ -191,34 +193,27 @@ static void n_tty_set_room(struct tty_struct *tty)
}
}
-static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
-{
- if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
- *read_buf_addr(ldata, ldata->read_head) = c;
- ldata->read_head++;
- }
-}
-
/**
* put_tty_queue - add character to tty
* @c: character
* @ldata: n_tty data
*
- * Add a character to the tty read_buf queue. This is done under the
- * read_lock to serialize character addition and also to protect us
- * against parallel reads or flushes
+ * Add a character to the tty read_buf queue.
+ *
+ * n_tty_receive_buf()/producer path:
+ * caller holds non-exclusive termios_rwsem
+ * modifies read_head
+ *
+ * read_head is only considered 'published' if canonical mode is
+ * not active.
*/
static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
{
- unsigned long flags;
- /*
- * The problem of stomping on the buffers ends here.
- * Why didn't anyone see this one coming? --AJK
- */
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- put_tty_queue_nolock(c, ldata);
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
+ *read_buf_addr(ldata, ldata->read_head) = c;
+ ldata->read_head++;
+ }
}
/**
@@ -228,16 +223,13 @@ static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
* Reset the read buffer counters and clear the flags.
* Called from n_tty_open() and n_tty_flush_buffer().
*
- * Locking: tty_read_lock for read fields.
+ * Locking: caller holds exclusive termios_rwsem
+ * (or locking is not required)
*/
static void reset_buffer_flags(struct n_tty_data *ldata)
{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
mutex_lock(&ldata->echo_lock);
ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
@@ -267,47 +259,55 @@ static void n_tty_packet_mode_flush(struct tty_struct *tty)
* buffer flushed (eg at hangup) or when the N_TTY line discipline
* internally has to clean the pending queue (for example some signals).
*
- * Locking: ctrl_lock, read_lock.
+ * Holds termios_rwsem to exclude producer/consumer while
+ * buffer indices are reset.
+ *
+ * Locking: ctrl_lock, exclusive termios_rwsem
*/
static void n_tty_flush_buffer(struct tty_struct *tty)
{
+ down_write(&tty->termios_rwsem);
reset_buffer_flags(tty->disc_data);
n_tty_set_room(tty);
if (tty->link)
n_tty_packet_mode_flush(tty);
+ up_write(&tty->termios_rwsem);
}
-/**
- * n_tty_chars_in_buffer - report available bytes
- * @tty: tty device
- *
- * Report the number of characters buffered to be delivered to user
- * at this instant in time.
- *
- * Locking: read_lock
- */
-
static ssize_t chars_in_buffer(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
- unsigned long flags;
ssize_t n = 0;
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
if (!ldata->icanon)
n = read_cnt(ldata);
else
n = ldata->canon_head - ldata->read_tail;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
return n;
}
+/**
+ * n_tty_chars_in_buffer - report available bytes
+ * @tty: tty device
+ *
+ * Report the number of characters buffered to be delivered to user
+ * at this instant in time.
+ *
+ * Locking: exclusive termios_rwsem
+ */
+
static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
{
+ ssize_t n;
+
WARN_ONCE(1, "%s is deprecated and scheduled for removal.", __func__);
- return chars_in_buffer(tty);
+
+ down_write(&tty->termios_rwsem);
+ n = chars_in_buffer(tty);
+ up_write(&tty->termios_rwsem);
+ return n;
}
/**
@@ -915,7 +915,12 @@ static inline void finish_erasing(struct n_tty_data *ldata)
* present in the stream from the driver layer. Handles the complexities
* of UTF-8 multibyte symbols.
*
- * Locking: read_lock for tty buffers
+ * n_tty_receive_buf()/producer path:
+ * caller holds non-exclusive termios_rwsem
+ * modifies read_head
+ *
+ * Modifying the read_head is not considered a publish in this context
+ * because canonical mode is active -- only canon_head publishes
*/
static void eraser(unsigned char c, struct tty_struct *tty)
@@ -925,9 +930,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
size_t head;
size_t cnt;
int seen_alnums;
- unsigned long flags;
- /* FIXME: locking needed ? */
if (ldata->read_head == ldata->canon_head) {
/* process_output('\a', tty); */ /* what do you think? */
return;
@@ -938,15 +941,11 @@ static void eraser(unsigned char c, struct tty_struct *tty)
kill_type = WERASE;
else {
if (!L_ECHO(tty)) {
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = ldata->canon_head;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
return;
}
if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = ldata->canon_head;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
finish_erasing(ldata);
echo_char(KILL_CHAR(tty), tty);
/* Add a newline if ECHOK is on and ECHOKE is off. */
@@ -958,7 +957,6 @@ static void eraser(unsigned char c, struct tty_struct *tty)
}
seen_alnums = 0;
- /* FIXME: Locking ?? */
while (ldata->read_head != ldata->canon_head) {
head = ldata->read_head;
@@ -980,9 +978,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
break;
}
cnt = ldata->read_head - head;
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = head;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
if (!ldata->erasing) {
@@ -1071,7 +1067,11 @@ static inline void isig(int sig, struct tty_struct *tty)
* An RS232 break event has been hit in the incoming bitstream. This
* can cause a variety of events depending upon the termios settings.
*
- * Called from the receive_buf path so single threaded.
+ * n_tty_receive_buf()/producer path:
+ * caller holds non-exclusive termios_rwsem
+ * publishes read_head via put_tty_queue()
+ *
+ * Note: may get exclusive termios_rwsem if flushing input buffer
*/
static inline void n_tty_receive_break(struct tty_struct *tty)
@@ -1083,8 +1083,11 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
if (I_BRKINT(tty)) {
isig(SIGINT, tty);
if (!L_NOFLSH(tty)) {
+ /* flushing needs exclusive termios_rwsem */
+ up_read(&tty->termios_rwsem);
n_tty_flush_buffer(tty);
tty_driver_flush_buffer(tty);
+ down_read(&tty->termios_rwsem);
}
return;
}
@@ -1131,7 +1134,11 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty)
* @c: character
*
* Process a parity error and queue the right data to indicate
- * the error case if necessary. Locking as per n_tty_receive_buf.
+ * the error case if necessary.
+ *
+ * n_tty_receive_buf()/producer path:
+ * caller holds non-exclusive termios_rwsem
+ * publishes read_head via put_tty_queue()
*/
static inline void n_tty_receive_parity_error(struct tty_struct *tty,
unsigned char c)
@@ -1159,12 +1166,16 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty,
* Process an individual character of input received from the driver.
* This is serialized with respect to itself by the rules for the
* driver above.
+ *
+ * n_tty_receive_buf()/producer path:
+ * caller holds non-exclusive termios_rwsem
+ * publishes canon_head if canonical mode is active
+ * otherwise, publishes read_head via put_tty_queue()
*/
static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
- unsigned long flags;
int parmrk;
if (ldata->raw) {
@@ -1253,8 +1264,11 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (c == SUSP_CHAR(tty)) {
send_signal:
if (!L_NOFLSH(tty)) {
+ /* flushing needs exclusive termios_rwsem */
+ up_read(&tty->termios_rwsem);
n_tty_flush_buffer(tty);
tty_driver_flush_buffer(tty);
+ down_read(&tty->termios_rwsem);
}
if (I_IXON(tty))
start_tty(tty);
@@ -1355,11 +1369,9 @@ send_signal:
put_tty_queue(c, ldata);
handle_newline:
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags);
- put_tty_queue_nolock(c, ldata);
+ put_tty_queue(c, ldata);
ldata->canon_head = ldata->read_head;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
@@ -1420,6 +1432,10 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
* been received. This function must be called from soft contexts
* not from interrupt context. The driver is responsible for making
* calls one at a time and in order (or using flush_to_ldisc)
+ *
+ * n_tty_receive_buf()/producer path:
+ * claims non-exclusive termios_rwsem
+ * publishes read_head and canon_head
*/
static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
@@ -1430,10 +1446,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *f, flags = TTY_NORMAL;
int i;
char buf[64];
- unsigned long cpuflags;
if (ldata->real_raw) {
- raw_spin_lock_irqsave(&ldata->read_lock, cpuflags);
i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1)));
i = min(count, i);
@@ -1447,7 +1461,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
i = min(count, i);
memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
ldata->read_head += i;
- raw_spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
} else {
for (i = count, p = cp, f = fp; i; i--, p++) {
if (f)
@@ -1677,7 +1690,6 @@ static int n_tty_open(struct tty_struct *tty)
mutex_init(&ldata->atomic_read_lock);
mutex_init(&ldata->output_lock);
mutex_init(&ldata->echo_lock);
- raw_spin_lock_init(&ldata->read_lock);
/* These are ugly. Currently a malloc failure here can panic */
ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
@@ -1733,6 +1745,9 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
*
* Called under the ldata->atomic_read_lock sem
*
+ * n_tty_read()/consumer path:
+ * caller holds non-exclusive termios_rwsem
+ * read_tail published
*/
static int copy_from_read_buf(struct tty_struct *tty,
@@ -1743,27 +1758,22 @@ static int copy_from_read_buf(struct tty_struct *tty,
struct n_tty_data *ldata = tty->disc_data;
int retval;
size_t n;
- unsigned long flags;
bool is_eof;
size_t tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
retval = 0;
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
n = min(read_cnt(ldata), N_TTY_BUF_SIZE - tail);
n = min(*nr, n);
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n) {
retval = copy_to_user(*b, read_buf_addr(ldata, tail), n);
n -= retval;
is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty);
tty_audit_add_data(tty, read_buf_addr(ldata, tail), n,
ldata->icanon);
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_tail += n;
/* Turn single EOF into zero-length read */
if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
n = 0;
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
*b += n;
*nr -= n;
}
@@ -1781,6 +1791,10 @@ static int copy_from_read_buf(struct tty_struct *tty,
* character into the user-space buffer.
*
* Called under the atomic_read_lock mutex
+ *
+ * n_tty_read()/consumer path:
+ * caller holds non-exclusive termios_rwsem
+ * read_tail published
*/
static int canon_copy_from_read_buf(struct tty_struct *tty,
@@ -1788,21 +1802,15 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
size_t *nr)
{
struct n_tty_data *ldata = tty->disc_data;
- unsigned long flags;
size_t n, size, more, c;
size_t eol;
size_t tail;
int ret, found = 0;
/* N.B. avoid overrun if nr == 0 */
-
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
-
n = min(*nr, read_cnt(ldata));
- if (!n) {
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ if (!n)
return 0;
- }
tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
size = min_t(size_t, tail + n, N_TTY_BUF_SIZE);
@@ -1830,8 +1838,6 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu size:%zu more:%zu\n",
__func__, eol, found, n, c, size, more);
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
-
if (n > size) {
ret = copy_to_user(*b, read_buf_addr(ldata, tail), size);
if (ret)
@@ -1845,11 +1851,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
*b += n;
*nr -= n;
- raw_spin_lock_irqsave(&ldata->read_lock, flags);
- ldata->read_tail += c;
if (found)
- __clear_bit(eol, ldata->read_flags);
- raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+ clear_bit(eol, ldata->read_flags);
+ smp_mb__after_clear_bit();
+ ldata->read_tail += c;
if (found)
tty_audit_push(tty);
@@ -1913,6 +1918,10 @@ static int job_control(struct tty_struct *tty, struct file *file)
* a hangup. Always called in user context, may sleep.
*
* This code must be sure never to sleep through a hangup.
+ *
+ * n_tty_read()/consumer path:
+ * claims non-exclusive termios_rwsem
+ * publishes read_tail
*/
static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
@@ -2279,10 +2288,12 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
case TIOCOUTQ:
return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
- /* FIXME: Locking */
- retval = read_cnt(ldata);
+ down_write(&tty->termios_rwsem);
if (L_ICANON(tty))
retval = inq_canon(ldata);
+ else
+ retval = read_cnt(ldata);
+ up_write(&tty->termios_rwsem);
return put_user(retval, (unsigned int __user *) arg);
default:
return n_tty_ioctl_helper(tty, file, cmd, arg);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 15/24] n_tty: Reset lnext if canonical mode changes
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (13 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 14/24] n_tty: Make N_TTY ldisc receive path lockless Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 16/24] n_tty: Fix type mismatches in receive_buf raw copy Peter Hurley
` (10 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
lnext escapes the next input character as a literal, and must
be reset when canonical mode changes (to avoid misinterpreting
a special character as a literal if canonical mode is changed
back again).
lnext is specifically not reset on a buffer flush so as to avoid
misinterpreting the next input character as a special character.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index c7f71cb..e63beab 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1574,6 +1574,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
ldata->canon_head = ldata->read_tail;
ldata->erasing = 0;
+ ldata->lnext = 0;
}
if (canon_change && !L_ICANON(tty) && read_cnt(ldata))
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 16/24] n_tty: Fix type mismatches in receive_buf raw copy
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (14 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 15/24] n_tty: Reset lnext if canonical mode changes Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 17/24] n_tty: Don't wait for buffer work in read() loop Peter Hurley
` (9 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index e63beab..fe1c399 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1444,24 +1444,27 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
struct n_tty_data *ldata = tty->disc_data;
const unsigned char *p;
char *f, flags = TTY_NORMAL;
- int i;
char buf[64];
if (ldata->real_raw) {
- i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
- N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1)));
- i = min(count, i);
- memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
- ldata->read_head += i;
- cp += i;
- count -= i;
-
- i = min(N_TTY_BUF_SIZE - read_cnt(ldata),
- N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1)));
- i = min(count, i);
- memcpy(read_buf_addr(ldata, ldata->read_head), cp, i);
- ldata->read_head += i;
+ size_t n, head;
+
+ head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
+ n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
+ n = min_t(size_t, count, n);
+ memcpy(read_buf_addr(ldata, head), cp, n);
+ ldata->read_head += n;
+ cp += n;
+ count -= n;
+
+ head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
+ n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
+ n = min_t(size_t, count, n);
+ memcpy(read_buf_addr(ldata, head), cp, n);
+ ldata->read_head += n;
} else {
+ int i;
+
for (i = count, p = cp, f = fp; i; i--, p++) {
if (f)
flags = *f++;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 17/24] n_tty: Don't wait for buffer work in read() loop
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (15 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 16/24] n_tty: Fix type mismatches in receive_buf raw copy Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 18/24] n_tty: Separate buffer indices to prevent cache-line sharing Peter Hurley
` (8 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
User-space read() can run concurrently with receiving from device;
waiting for receive_buf() to complete is not required.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index fe1c399..a6eea30 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1724,7 +1724,6 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
{
struct n_tty_data *ldata = tty->disc_data;
- tty_flush_to_ldisc(tty);
if (ldata->icanon && !L_EXTPROC(tty)) {
if (ldata->canon_head != ldata->read_tail)
return 1;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 18/24] n_tty: Separate buffer indices to prevent cache-line sharing
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (16 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 17/24] n_tty: Don't wait for buffer work in read() loop Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 19/24] tty: Only guarantee termios read safety for throttle/unthrottle Peter Hurley
` (7 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
If the read buffer indices are in the same cache-line, cpus will
contended over the cache-line (so called 'false sharing').
Separate the producer-published fields from the consumer-published
fields; document the locks relevant to each field.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index a6eea30..d0c8805 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -82,29 +82,38 @@
#endif
struct n_tty_data {
- unsigned int column;
+ /* producer-published */
+ size_t read_head;
+ size_t canon_head;
+ DECLARE_BITMAP(process_char_map, 256);
+
+ /* private to n_tty_receive_overrun (single-threaded) */
unsigned long overrun_time;
int num_overrun;
/* non-atomic */
bool no_room;
+ /* must hold exclusive termios_rwsem to reset these */
unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
unsigned char echo_overrun:1;
- DECLARE_BITMAP(process_char_map, 256);
+ /* shared by producer and consumer */
+ char *read_buf;
DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
- char *read_buf;
- size_t read_head;
- size_t read_tail;
int minimum_to_wake;
+ /* consumer-published */
+ size_t read_tail;
+
+ /* protected by echo_lock */
unsigned char *echo_buf;
unsigned int echo_pos;
unsigned int echo_cnt;
- size_t canon_head;
+ /* protected by output lock */
+ unsigned int column;
unsigned int canon_column;
struct mutex atomic_read_lock;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 19/24] tty: Only guarantee termios read safety for throttle/unthrottle
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (17 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 18/24] n_tty: Separate buffer indices to prevent cache-line sharing Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 20/24] n_tty: Move chars_in_buffer() to factor throttle/unthrottle Peter Hurley
` (6 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
No tty driver modifies termios during throttle() or unthrottle().
Therefore, only read safety is required.
However, tty_throttle_safe and tty_unthrottle_safe must still be
mutually exclusive; introduce throttle_mutex for that purpose.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 4 ----
drivers/tty/tty_io.c | 1 +
drivers/tty/tty_ioctl.c | 8 ++++----
include/linux/tty.h | 1 +
4 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d0c8805..b78ee464 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1518,9 +1518,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE)
break;
- up_read(&tty->termios_rwsem);
throttled = tty_throttle_safe(tty);
- down_read(&tty->termios_rwsem);
if (!throttled)
break;
}
@@ -2086,9 +2084,7 @@ do_it_again:
if (!tty->count)
break;
n_tty_set_room(tty);
- up_read(&tty->termios_rwsem);
unthrottled = tty_unthrottle_safe(tty);
- down_read(&tty->termios_rwsem);
if (!unthrottled)
break;
}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 1cec782..7dbea58 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -3013,6 +3013,7 @@ void initialize_tty_struct(struct tty_struct *tty,
tty->session = NULL;
tty->pgrp = NULL;
mutex_init(&tty->legacy_mutex);
+ mutex_init(&tty->throttle_mutex);
init_rwsem(&tty->termios_rwsem);
init_ldsem(&tty->ldisc_sem);
init_waitqueue_head(&tty->write_wait);
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 9ce20df..03ba081 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -151,7 +151,7 @@ int tty_throttle_safe(struct tty_struct *tty)
{
int ret = 0;
- down_write(&tty->termios_rwsem);
+ mutex_lock(&tty->throttle_mutex);
if (!test_bit(TTY_THROTTLED, &tty->flags)) {
if (tty->flow_change != TTY_THROTTLE_SAFE)
ret = 1;
@@ -161,7 +161,7 @@ int tty_throttle_safe(struct tty_struct *tty)
tty->ops->throttle(tty);
}
}
- up_write(&tty->termios_rwsem);
+ mutex_unlock(&tty->throttle_mutex);
return ret;
}
@@ -182,7 +182,7 @@ int tty_unthrottle_safe(struct tty_struct *tty)
{
int ret = 0;
- down_write(&tty->termios_rwsem);
+ mutex_lock(&tty->throttle_mutex);
if (test_bit(TTY_THROTTLED, &tty->flags)) {
if (tty->flow_change != TTY_UNTHROTTLE_SAFE)
ret = 1;
@@ -192,7 +192,7 @@ int tty_unthrottle_safe(struct tty_struct *tty)
tty->ops->unthrottle(tty);
}
}
- up_write(&tty->termios_rwsem);
+ mutex_unlock(&tty->throttle_mutex);
return ret;
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index d304207..57a70d1 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -244,6 +244,7 @@ struct tty_struct {
struct mutex atomic_write_lock;
struct mutex legacy_mutex;
+ struct mutex throttle_mutex;
struct rw_semaphore termios_rwsem;
spinlock_t ctrl_lock;
/* Termios values are protected by the termios rwsem */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 20/24] n_tty: Move chars_in_buffer() to factor throttle/unthrottle
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (18 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 19/24] tty: Only guarantee termios read safety for throttle/unthrottle Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 21/24] n_tty: Factor throttle/unthrottle into helper functions Peter Hurley
` (5 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Prepare to factor throttle and unthrottle into helper functions;
relocate chars_in_buffer() to avoid forward declaration.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index b78ee464..9ec0c68 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -202,6 +202,18 @@ static void n_tty_set_room(struct tty_struct *tty)
}
}
+static ssize_t chars_in_buffer(struct tty_struct *tty)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ ssize_t n = 0;
+
+ if (!ldata->icanon)
+ n = read_cnt(ldata);
+ else
+ n = ldata->canon_head - ldata->read_tail;
+ return n;
+}
+
/**
* put_tty_queue - add character to tty
* @c: character
@@ -285,18 +297,6 @@ static void n_tty_flush_buffer(struct tty_struct *tty)
up_write(&tty->termios_rwsem);
}
-static ssize_t chars_in_buffer(struct tty_struct *tty)
-{
- struct n_tty_data *ldata = tty->disc_data;
- ssize_t n = 0;
-
- if (!ldata->icanon)
- n = read_cnt(ldata);
- else
- n = ldata->canon_head - ldata->read_tail;
- return n;
-}
-
/**
* n_tty_chars_in_buffer - report available bytes
* @tty: tty device
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 21/24] n_tty: Factor throttle/unthrottle into helper functions
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (19 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 20/24] n_tty: Move chars_in_buffer() to factor throttle/unthrottle Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 22/24] n_tty: Move n_tty_write_wakeup() to avoid forward declaration Peter Hurley
` (4 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Prepare for special handling of pty throttle/unthrottle; factor
flow control into helper functions.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 81 ++++++++++++++++++++++++++++++-----------------------
1 file changed, 46 insertions(+), 35 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 9ec0c68..9e13c80 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -214,6 +214,50 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
return n;
}
+static inline void n_tty_check_throttle(struct tty_struct *tty)
+{
+ /*
+ * Check the remaining room for the input canonicalization
+ * mode. We don't want to throttle the driver if we're in
+ * canonical mode and don't have a newline yet!
+ */
+ while (1) {
+ int throttled;
+ tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
+ if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE)
+ break;
+ throttled = tty_throttle_safe(tty);
+ if (!throttled)
+ break;
+ }
+ __tty_set_flow_change(tty, 0);
+}
+
+static inline void n_tty_check_unthrottle(struct tty_struct *tty)
+{
+ /* If there is enough space in the read buffer now, let the
+ * low-level driver know. We use chars_in_buffer() to
+ * check the buffer, as it now knows about canonical mode.
+ * Otherwise, if the driver is throttled and the line is
+ * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode,
+ * we won't get any more characters.
+ */
+
+ while (1) {
+ int unthrottled;
+ tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
+ if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
+ break;
+ if (!tty->count)
+ break;
+ n_tty_set_room(tty);
+ unthrottled = tty_unthrottle_safe(tty);
+ if (!unthrottled)
+ break;
+ }
+ __tty_set_flow_change(tty, 0);
+}
+
/**
* put_tty_queue - add character to tty
* @c: character
@@ -1508,21 +1552,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
wake_up_interruptible(&tty->read_wait);
}
- /*
- * Check the remaining room for the input canonicalization
- * mode. We don't want to throttle the driver if we're in
- * canonical mode and don't have a newline yet!
- */
- while (1) {
- int throttled;
- tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
- if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE)
- break;
- throttled = tty_throttle_safe(tty);
- if (!throttled)
- break;
- }
- __tty_set_flow_change(tty, 0);
+ n_tty_check_throttle(tty);
}
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
@@ -2069,26 +2099,7 @@ do_it_again:
}
}
- /* If there is enough space in the read buffer now, let the
- * low-level driver know. We use chars_in_buffer() to
- * check the buffer, as it now knows about canonical mode.
- * Otherwise, if the driver is throttled and the line is
- * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode,
- * we won't get any more characters.
- */
- while (1) {
- int unthrottled;
- tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
- if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
- break;
- if (!tty->count)
- break;
- n_tty_set_room(tty);
- unthrottled = tty_unthrottle_safe(tty);
- if (!unthrottled)
- break;
- }
- __tty_set_flow_change(tty, 0);
+ n_tty_check_unthrottle(tty);
if (b - buf >= minimum)
break;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 22/24] n_tty: Move n_tty_write_wakeup() to avoid forward declaration
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (20 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 21/24] n_tty: Factor throttle/unthrottle into helper functions Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:14 ` [PATCH v4 23/24] n_tty: Special case pty flow control Peter Hurley
` (3 subsequent siblings)
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Prepare to special case pty flow control; avoid forward declaration.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 31 +++++++++++++++----------------
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 9e13c80..0e3efc1 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -214,6 +214,21 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
return n;
}
+/**
+ * n_tty_write_wakeup - asynchronous I/O notifier
+ * @tty: tty device
+ *
+ * Required for the ptys, serial driver etc. since processes
+ * that attach themselves to the master and rely on ASYNC
+ * IO must be woken up
+ */
+
+static void n_tty_write_wakeup(struct tty_struct *tty)
+{
+ if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags))
+ kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
+}
+
static inline void n_tty_check_throttle(struct tty_struct *tty)
{
/*
@@ -1458,22 +1473,6 @@ handle_newline:
put_tty_queue(c, ldata);
}
-
-/**
- * n_tty_write_wakeup - asynchronous I/O notifier
- * @tty: tty device
- *
- * Required for the ptys, serial driver etc. since processes
- * that attach themselves to the master and rely on ASYNC
- * IO must be woken up
- */
-
-static void n_tty_write_wakeup(struct tty_struct *tty)
-{
- if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags))
- kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
-}
-
/**
* n_tty_receive_buf - data receive
* @tty: terminal device
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v4 23/24] n_tty: Special case pty flow control
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (21 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 22/24] n_tty: Move n_tty_write_wakeup() to avoid forward declaration Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-07-23 12:47 ` [PATCH v5 " Peter Hurley
2013-06-15 13:14 ` [PATCH v4 24/24] n_tty: Queue buffer work on any available cpu Peter Hurley
` (2 subsequent siblings)
25 siblings, 1 reply; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
The pty driver forces ldisc flow control on, regardless of available
receive buffer space, so the writer can be woken whenever unthrottle
is called. However, this 'forced throttle' has performance
consequences, as multiple atomic operations are necessary to
unthrottle and perform the write wakeup for every input line (in
canonical mode).
Instead, short-circuit the unthrottle if the tty is a pty and perform
the write wakeup directly.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0e3efc1..072e52f 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -231,6 +231,8 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
static inline void n_tty_check_throttle(struct tty_struct *tty)
{
+ if (tty->driver->type == TTY_DRIVER_TYPE_PTY)
+ return;
/*
* Check the remaining room for the input canonicalization
* mode. We don't want to throttle the driver if we're in
@@ -250,6 +252,17 @@ static inline void n_tty_check_throttle(struct tty_struct *tty)
static inline void n_tty_check_unthrottle(struct tty_struct *tty)
{
+ if (tty->driver->type == TTY_DRIVER_TYPE_PTY) {
+ if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
+ return;
+ if (!tty->count)
+ return;
+ n_tty_set_room(tty);
+ n_tty_write_wakeup(tty->link);
+ wake_up_interruptible_poll(&tty->link->write_wait, POLLOUT);
+ return;
+ }
+
/* If there is enough space in the read buffer now, let the
* low-level driver know. We use chars_in_buffer() to
* check the buffer, as it now knows about canonical mode.
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v5 23/24] n_tty: Special case pty flow control
2013-06-15 13:14 ` [PATCH v4 23/24] n_tty: Special case pty flow control Peter Hurley
@ 2013-07-23 12:47 ` Peter Hurley
0 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-23 12:47 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
The pty driver forces ldisc flow control on, regardless of available
receive buffer space, so the writer can be woken whenever unthrottle
is called. However, this 'forced throttle' has performance
consequences, as multiple atomic operations are necessary to
unthrottle and perform the write wakeup for every input line (in
canonical mode).
Instead, short-circuit the unthrottle if the tty is a pty and perform
the write wakeup directly.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
v5: fix regression in unusual pty/ldisc configurations where
i/o fails to make forward progress
drivers/tty/n_tty.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0e3efc1..59eb444 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -231,6 +231,8 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
static inline void n_tty_check_throttle(struct tty_struct *tty)
{
+ if (tty->driver->type == TTY_DRIVER_TYPE_PTY)
+ return;
/*
* Check the remaining room for the input canonicalization
* mode. We don't want to throttle the driver if we're in
@@ -250,6 +252,18 @@ static inline void n_tty_check_throttle(struct tty_struct *tty)
static inline void n_tty_check_unthrottle(struct tty_struct *tty)
{
+ if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+ tty->link->ldisc->ops->write_wakeup == n_tty_write_wakeup) {
+ if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
+ return;
+ if (!tty->count)
+ return;
+ n_tty_set_room(tty);
+ n_tty_write_wakeup(tty->link);
+ wake_up_interruptible_poll(&tty->link->write_wait, POLLOUT);
+ return;
+ }
+
/* If there is enough space in the read buffer now, let the
* low-level driver know. We use chars_in_buffer() to
* check the buffer, as it now knows about canonical mode.
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread
* [PATCH v4 24/24] n_tty: Queue buffer work on any available cpu
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (22 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 23/24] n_tty: Special case pty flow control Peter Hurley
@ 2013-06-15 13:14 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
2013-06-17 20:01 ` [PATCH v4 00/24] lockless n_tty receive path Greg Kroah-Hartman
25 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:14 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Scheduling buffer work on the same cpu as the read() thread
limits the parallelism now possible between the receive_buf path
and the n_tty_read() path.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 072e52f..2321d6a 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -198,7 +198,7 @@ static void n_tty_set_room(struct tty_struct *tty)
*/
WARN_RATELIMIT(test_bit(TTY_LDISC_HALTED, &tty->flags),
"scheduling buffer work for halted ldisc\n");
- schedule_work(&tty->port->buf.work);
+ queue_work(system_unbound_wq, &tty->port->buf.work);
}
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 00/16] lockless tty flip buffers
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (23 preceding siblings ...)
2013-06-15 13:14 ` [PATCH v4 24/24] n_tty: Queue buffer work on any available cpu Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 01/16] tty: Compute flip buffer ptrs Peter Hurley
` (17 more replies)
2013-06-17 20:01 ` [PATCH v4 00/24] lockless n_tty receive path Greg Kroah-Hartman
25 siblings, 18 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
** v2 changes **
- Rebased on v4 of 'lockless n_tty receive path'
This 2nd of 4 patchsets implements lockless receive from the tty driver.
By lockless, I'm referring to the 'lock' spin lock formerly used to
serialize access to the flip buffer list.
Since the driver-side flip buffer usage is already single-threaded and
line discipline receiving is already single-threaded, implementing
a lockless flip buffer list was the primary hurdle. [The only 2 flip
buffer consumers, flush_to_ldisc() and tty_buffer_flush() were already
mutually exclusive and this exclusion remains although the mechanism
is changed.]
Since the flip buffer consumers, flush_to_ldisc() and tty_buffer_flush(),
already leave the last-consumed flip buffer on the list, and since the
existing flip buffer api is already divided into an add/commit interface,
most of the requirement for a lockless algorithm was already
in-place. The main differences are;
1) the initial state of the flip buffer list points head and tail
to a 0-sized sentinel flip buffer. This eliminates head & tail NULL
testing and assigning the head ptr from the driver-side thread. This
sentinel is 'consumed' on the first iteration of ldisc receiving and
does not require special-case logic.
2) the free list uses the atomic singly-linked llist interface. While
this guarantees safe concurrent usage by both producer and consumer,
it's not optimal. Both producer and consumer unnecessarily contend
over the free list head ptr; a better approach would be to maintain
an unconsumed buffer in the same way the flip buffer list works.
Light testing has shown this contention accounts for roughly 5% of
total cpu time in end-to-end copying.
3) The mutual exclusion between consumers is reimplemented as a mutex;
this eliminates the need to drop the lock across the ldisc
receive_buf() method. This mutual exclusion is extended to a public
interface which the vt driver now uses to safely utilize the ldisc
receive_buf() interface when pasting a selection.
Peter Hurley (16):
tty: Compute flip buffer ptrs
tty: Fix flip buffer free list
tty: Factor flip buffer initialization into helper function
tty: Merge tty_buffer_find() into tty_buffer_alloc()
tty: Use generic names for flip buffer list cursors
tty: Use lockless flip buffer free list
tty: Simplify flip buffer list with 0-sized sentinel
tty: Track flip buffer memory limit atomically
tty: Make driver-side flip buffers lockless
tty: Ensure single-threaded flip buffer consumer with mutex
tty: Only perform flip buffer flush from tty_buffer_flush()
tty: Avoid false-sharing flip buffer ptrs
tty: Use non-atomic state to signal flip buffer flush pending
tty: Merge __tty_flush_buffer() into lone call site
tty: Fix unsafe vt paste_selection()
tty: Remove private constant from global namespace
drivers/staging/dgrp/dgrp_tty.c | 2 +
drivers/tty/pty.c | 10 +-
drivers/tty/tty_buffer.c | 395 +++++++++++++++++++---------------------
drivers/tty/vt/selection.c | 4 +-
include/linux/llist.h | 23 +++
include/linux/tty.h | 39 ++--
include/linux/tty_flip.h | 8 +-
7 files changed, 244 insertions(+), 237 deletions(-)
--
1.8.1.2
^ permalink raw reply [flat|nested] 238+ messages in thread* [PATCH v2 01/16] tty: Compute flip buffer ptrs
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 02/16] tty: Fix flip buffer free list Peter Hurley
` (16 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
The char_buf_ptr and flag_buf_ptr values are trivially derived from
the .data field offset; compute values as needed.
Fixes a long-standing type-mismatch with the char and flag ptrs.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 22 ++++++++++------------
include/linux/tty.h | 12 ++++++++++--
include/linux/tty_flip.h | 4 ++--
3 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index ff1b2e3..170674c 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -71,8 +71,6 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
p->next = NULL;
p->commit = 0;
p->read = 0;
- p->char_buf_ptr = (char *)(p->data);
- p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
port->buf.memory_used += size;
return p;
}
@@ -265,8 +263,8 @@ int tty_insert_flip_string_fixed_flag(struct tty_port *port,
if (unlikely(space == 0)) {
break;
}
- memcpy(tb->char_buf_ptr + tb->used, chars, space);
- memset(tb->flag_buf_ptr + tb->used, flag, space);
+ memcpy(char_buf_ptr(tb, tb->used), chars, space);
+ memset(flag_buf_ptr(tb, tb->used), flag, space);
tb->used += space;
copied += space;
chars += space;
@@ -303,8 +301,8 @@ int tty_insert_flip_string_flags(struct tty_port *port,
if (unlikely(space == 0)) {
break;
}
- memcpy(tb->char_buf_ptr + tb->used, chars, space);
- memcpy(tb->flag_buf_ptr + tb->used, flags, space);
+ memcpy(char_buf_ptr(tb, tb->used), chars, space);
+ memcpy(flag_buf_ptr(tb, tb->used), flags, space);
tb->used += space;
copied += space;
chars += space;
@@ -364,8 +362,8 @@ int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars,
int space = tty_buffer_request_room(port, size);
if (likely(space)) {
struct tty_buffer *tb = port->buf.tail;
- *chars = tb->char_buf_ptr + tb->used;
- memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+ *chars = char_buf_ptr(tb, tb->used);
+ memset(flag_buf_ptr(tb, tb->used), TTY_NORMAL, space);
tb->used += space;
}
return space;
@@ -394,8 +392,8 @@ int tty_prepare_flip_string_flags(struct tty_port *port,
int space = tty_buffer_request_room(port, size);
if (likely(space)) {
struct tty_buffer *tb = port->buf.tail;
- *chars = tb->char_buf_ptr + tb->used;
- *flags = tb->flag_buf_ptr + tb->used;
+ *chars = char_buf_ptr(tb, tb->used);
+ *flags = flag_buf_ptr(tb, tb->used);
tb->used += space;
}
return space;
@@ -407,8 +405,8 @@ static int
receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
{
struct tty_ldisc *disc = tty->ldisc;
- char *p = head->char_buf_ptr + head->read;
- unsigned char *f = head->flag_buf_ptr + head->read;
+ unsigned char *p = char_buf_ptr(head, head->read);
+ char *f = flag_buf_ptr(head, head->read);
if (disc->ops->receive_buf2)
count = disc->ops->receive_buf2(tty, p, f, count);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 57a70d1..87bbaa3 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -31,8 +31,6 @@
struct tty_buffer {
struct tty_buffer *next;
- char *char_buf_ptr;
- unsigned char *flag_buf_ptr;
int used;
int size;
int commit;
@@ -41,6 +39,16 @@ struct tty_buffer {
unsigned long data[0];
};
+static inline unsigned char *char_buf_ptr(struct tty_buffer *b, int ofs)
+{
+ return ((unsigned char *)b->data) + ofs;
+}
+
+static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
+{
+ return (char *)char_buf_ptr(b, ofs) + b->size;
+}
+
/*
* We default to dicing tty buffer allocations to this many characters
* in order to avoid multiple page allocations. We know the size of
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index e0f2526..ad03039 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -18,8 +18,8 @@ static inline int tty_insert_flip_char(struct tty_port *port,
{
struct tty_buffer *tb = port->buf.tail;
if (tb && tb->used < tb->size) {
- tb->flag_buf_ptr[tb->used] = flag;
- tb->char_buf_ptr[tb->used++] = ch;
+ *flag_buf_ptr(tb, tb->used) = flag;
+ *char_buf_ptr(tb, tb->used++) = ch;
return 1;
}
return tty_insert_flip_string_flags(port, &ch, &flag, 1);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 02/16] tty: Fix flip buffer free list
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
2013-06-15 13:36 ` [PATCH v2 01/16] tty: Compute flip buffer ptrs Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 03/16] tty: Factor flip buffer initialization into helper function Peter Hurley
` (15 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Since flip buffers are size-aligned to 256 bytes and all flip
buffers 512-bytes or larger are not added to the free list, the
free list only contains 256-byte flip buffers.
Remove the list search when allocating a new flip buffer.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 170674c..a5e3962 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -18,6 +18,10 @@
#include <linux/module.h>
#include <linux/ratelimit.h>
+
+#define MIN_TTYB_SIZE 256
+#define TTYB_ALIGN_MASK 255
+
/**
* tty_buffer_free_all - free buffers used by a tty
* @tty: tty to free from
@@ -94,7 +98,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
buf->memory_used -= b->size;
WARN_ON(buf->memory_used < 0);
- if (b->size >= 512)
+ if (b->size > MIN_TTYB_SIZE)
kfree(b);
else {
b->next = buf->free;
@@ -176,9 +180,10 @@ void tty_buffer_flush(struct tty_struct *tty)
static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
{
struct tty_buffer **tbh = &port->buf.free;
- while ((*tbh) != NULL) {
- struct tty_buffer *t = *tbh;
- if (t->size >= size) {
+ if (size <= MIN_TTYB_SIZE) {
+ if (*tbh) {
+ struct tty_buffer *t = *tbh;
+
*tbh = t->next;
t->next = NULL;
t->used = 0;
@@ -187,10 +192,9 @@ static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
port->buf.memory_used += t->size;
return t;
}
- tbh = &((*tbh)->next);
}
/* Round the buffer size out */
- size = (size + 0xFF) & ~0xFF;
+ size = __ALIGN_MASK(size, TTYB_ALIGN_MASK);
return tty_buffer_alloc(port, size);
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 03/16] tty: Factor flip buffer initialization into helper function
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
2013-06-15 13:36 ` [PATCH v2 01/16] tty: Compute flip buffer ptrs Peter Hurley
2013-06-15 13:36 ` [PATCH v2 02/16] tty: Fix flip buffer free list Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 04/16] tty: Merge tty_buffer_find() into tty_buffer_alloc() Peter Hurley
` (14 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Factor shared code; prepare for adding 0-sized sentinel flip buffer.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index a5e3962..56d4602 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -22,6 +22,15 @@
#define MIN_TTYB_SIZE 256
#define TTYB_ALIGN_MASK 255
+static void tty_buffer_reset(struct tty_buffer *p, size_t size)
+{
+ p->used = 0;
+ p->size = size;
+ p->next = NULL;
+ p->commit = 0;
+ p->read = 0;
+}
+
/**
* tty_buffer_free_all - free buffers used by a tty
* @tty: tty to free from
@@ -70,11 +79,8 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if (p == NULL)
return NULL;
- p->used = 0;
- p->size = size;
- p->next = NULL;
- p->commit = 0;
- p->read = 0;
+
+ tty_buffer_reset(p, size);
port->buf.memory_used += size;
return p;
}
@@ -185,10 +191,7 @@ static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
struct tty_buffer *t = *tbh;
*tbh = t->next;
- t->next = NULL;
- t->used = 0;
- t->commit = 0;
- t->read = 0;
+ tty_buffer_reset(t, t->size);
port->buf.memory_used += t->size;
return t;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 04/16] tty: Merge tty_buffer_find() into tty_buffer_alloc()
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (2 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 03/16] tty: Factor flip buffer initialization into helper function Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 05/16] tty: Use generic names for flip buffer list cursors Peter Hurley
` (13 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
tty_buffer_find() implements a simple free list lookaside cache.
Merge this functionality into tty_buffer_alloc() to reflect the
more traditional alloc/free symmetry.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 50 +++++++++++++++++-------------------------------
1 file changed, 18 insertions(+), 32 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 56d4602..a428fa2 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -64,6 +64,8 @@ void tty_buffer_free_all(struct tty_port *port)
* @size: desired size (characters)
*
* Allocate a new tty buffer to hold the desired number of characters.
+ * We round our buffers off in 256 character chunks to get better
+ * allocation behaviour.
* Return NULL if out of memory or the allocation would exceed the
* per device queue
*
@@ -72,14 +74,29 @@ void tty_buffer_free_all(struct tty_port *port)
static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
{
+ struct tty_buffer **tbh = &port->buf.free;
struct tty_buffer *p;
+ /* Round the buffer size out */
+ size = __ALIGN_MASK(size, TTYB_ALIGN_MASK);
+
+ if (size <= MIN_TTYB_SIZE) {
+ if (*tbh) {
+ p = *tbh;
+ *tbh = p->next;
+ goto found;
+ }
+ }
+
+ /* Should possibly check if this fails for the largest buffer we
+ have queued and recycle that ? */
if (port->buf.memory_used + size > 65536)
return NULL;
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if (p == NULL)
return NULL;
+found:
tty_buffer_reset(p, size);
port->buf.memory_used += size;
return p;
@@ -172,37 +189,6 @@ void tty_buffer_flush(struct tty_struct *tty)
}
/**
- * tty_buffer_find - find a free tty buffer
- * @tty: tty owning the buffer
- * @size: characters wanted
- *
- * Locate an existing suitable tty buffer or if we are lacking one then
- * allocate a new one. We round our buffers off in 256 character chunks
- * to get better allocation behaviour.
- *
- * Locking: Caller must hold tty->buf.lock
- */
-
-static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
-{
- struct tty_buffer **tbh = &port->buf.free;
- if (size <= MIN_TTYB_SIZE) {
- if (*tbh) {
- struct tty_buffer *t = *tbh;
-
- *tbh = t->next;
- tty_buffer_reset(t, t->size);
- port->buf.memory_used += t->size;
- return t;
- }
- }
- /* Round the buffer size out */
- size = __ALIGN_MASK(size, TTYB_ALIGN_MASK);
- return tty_buffer_alloc(port, size);
- /* Should possibly check if this fails for the largest buffer we
- have queued and recycle that ? */
-}
-/**
* tty_buffer_request_room - grow tty buffer if needed
* @tty: tty structure
* @size: size desired
@@ -230,7 +216,7 @@ int tty_buffer_request_room(struct tty_port *port, size_t size)
if (left < size) {
/* This is the slow path - looking for new buffers to use */
- if ((n = tty_buffer_find(port, size)) != NULL) {
+ if ((n = tty_buffer_alloc(port, size)) != NULL) {
if (b != NULL) {
b->next = n;
b->commit = b->used;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 05/16] tty: Use generic names for flip buffer list cursors
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (3 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 04/16] tty: Merge tty_buffer_find() into tty_buffer_alloc() Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 06/16] tty: Use lockless flip buffer free list Peter Hurley
` (12 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index a428fa2..0259a76 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -44,15 +44,15 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size)
void tty_buffer_free_all(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- struct tty_buffer *thead;
+ struct tty_buffer *p;
- while ((thead = buf->head) != NULL) {
- buf->head = thead->next;
- kfree(thead);
+ while ((p = buf->head) != NULL) {
+ buf->head = p->next;
+ kfree(p);
}
- while ((thead = buf->free) != NULL) {
- buf->free = thead->next;
- kfree(thead);
+ while ((p = buf->free) != NULL) {
+ buf->free = p->next;
+ kfree(p);
}
buf->tail = NULL;
buf->memory_used = 0;
@@ -143,13 +143,13 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
static void __tty_buffer_flush(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- struct tty_buffer *thead;
+ struct tty_buffer *next;
if (unlikely(buf->head == NULL))
return;
- while ((thead = buf->head->next) != NULL) {
+ while ((next = buf->head->next) != NULL) {
tty_buffer_free(port, buf->head);
- buf->head = thead;
+ buf->head = next;
}
WARN_ON(buf->head != buf->tail);
buf->head->read = buf->head->commit;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 06/16] tty: Use lockless flip buffer free list
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (4 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 05/16] tty: Use generic names for flip buffer list cursors Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 07/16] tty: Simplify flip buffer list with 0-sized sentinel Peter Hurley
` (11 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
In preparation for lockless flip buffers, make the flip buffer
free list lockless.
NB: using llist is not the optimal solution, as the driver and
buffer work may contend over the llist head unnecessarily. However,
test measurements indicate this contention is low.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 29 ++++++++++++-----------------
include/linux/llist.h | 23 +++++++++++++++++++++++
include/linux/tty.h | 8 ++++++--
3 files changed, 41 insertions(+), 19 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 0259a76..069640e 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -44,16 +44,17 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size)
void tty_buffer_free_all(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- struct tty_buffer *p;
+ struct tty_buffer *p, *next;
+ struct llist_node *llist;
while ((p = buf->head) != NULL) {
buf->head = p->next;
kfree(p);
}
- while ((p = buf->free) != NULL) {
- buf->free = p->next;
+ llist = llist_del_all(&buf->free);
+ llist_for_each_entry_safe(p, next, llist, free)
kfree(p);
- }
+
buf->tail = NULL;
buf->memory_used = 0;
}
@@ -68,22 +69,20 @@ void tty_buffer_free_all(struct tty_port *port)
* allocation behaviour.
* Return NULL if out of memory or the allocation would exceed the
* per device queue
- *
- * Locking: Caller must hold tty->buf.lock
*/
static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
{
- struct tty_buffer **tbh = &port->buf.free;
+ struct llist_node *free;
struct tty_buffer *p;
/* Round the buffer size out */
size = __ALIGN_MASK(size, TTYB_ALIGN_MASK);
if (size <= MIN_TTYB_SIZE) {
- if (*tbh) {
- p = *tbh;
- *tbh = p->next;
+ free = llist_del_first(&port->buf.free);
+ if (free) {
+ p = llist_entry(free, struct tty_buffer, free);
goto found;
}
}
@@ -109,8 +108,6 @@ found:
*
* Free a tty buffer, or add it to the free list according to our
* internal strategy
- *
- * Locking: Caller must hold tty->buf.lock
*/
static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
@@ -123,10 +120,8 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
if (b->size > MIN_TTYB_SIZE)
kfree(b);
- else {
- b->next = buf->free;
- buf->free = b;
- }
+ else
+ llist_add(&b->free, &buf->free);
}
/**
@@ -542,7 +537,7 @@ void tty_buffer_init(struct tty_port *port)
spin_lock_init(&buf->lock);
buf->head = NULL;
buf->tail = NULL;
- buf->free = NULL;
+ init_llist_head(&buf->free);
buf->memory_used = 0;
INIT_WORK(&buf->work, flush_to_ldisc);
}
diff --git a/include/linux/llist.h b/include/linux/llist.h
index a5199f6..97cf31d 100644
--- a/include/linux/llist.h
+++ b/include/linux/llist.h
@@ -125,6 +125,29 @@ static inline void init_llist_head(struct llist_head *list)
(pos) = llist_entry((pos)->member.next, typeof(*(pos)), member))
/**
+ * llist_for_each_entry_safe - iterate over some deleted entries of lock-less list of given type
+ * safe against removal of list entry
+ * @pos: the type * to use as a loop cursor.
+ * @n: another type * to use as temporary storage
+ * @node: the first entry of deleted list entries.
+ * @member: the name of the llist_node with the struct.
+ *
+ * In general, some entries of the lock-less list can be traversed
+ * safely only after being removed from list, so start with an entry
+ * instead of list head.
+ *
+ * If being used on entries deleted from lock-less list directly, the
+ * traverse order is from the newest to the oldest added entry. If
+ * you want to traverse from the oldest to the newest, you must
+ * reverse the order by yourself before traversing.
+ */
+#define llist_for_each_entry_safe(pos, n, node, member) \
+ for (pos = llist_entry((node), typeof(*pos), member); \
+ &pos->member != NULL && \
+ (n = llist_entry(pos->member.next, typeof(*n), member), true); \
+ pos = n)
+
+/**
* llist_empty - tests whether a lock-less list is empty
* @head: the list to test
*
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 87bbaa3..5043b12 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -11,6 +11,7 @@
#include <linux/tty_flags.h>
#include <uapi/linux/tty.h>
#include <linux/rwsem.h>
+#include <linux/llist.h>
@@ -30,7 +31,10 @@
#define __DISABLED_CHAR '\0'
struct tty_buffer {
- struct tty_buffer *next;
+ union {
+ struct tty_buffer *next;
+ struct llist_node free;
+ };
int used;
int size;
int commit;
@@ -65,7 +69,7 @@ struct tty_bufhead {
spinlock_t lock;
struct tty_buffer *head; /* Queue head */
struct tty_buffer *tail; /* Active buffer */
- struct tty_buffer *free; /* Free queue head */
+ struct llist_head free; /* Free queue head */
int memory_used; /* Buffer space used excluding
free queue */
};
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 07/16] tty: Simplify flip buffer list with 0-sized sentinel
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (5 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 06/16] tty: Use lockless flip buffer free list Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 08/16] tty: Track flip buffer memory limit atomically Peter Hurley
` (10 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Use a 0-sized sentinel to avoid assigning the head ptr from
the driver side thread. This also eliminates testing head/tail
for NULL.
When the sentinel is first 'consumed' by the buffer work
(or by tty_buffer_flush()), it is detached from the list but not
freed nor added to the free list. Both buffer work and
tty_buffer_flush() continue to preserve at least 1 flip buffer
to which head & tail is pointed.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 49 ++++++++++++++++++------------------------------
include/linux/tty.h | 1 +
2 files changed, 19 insertions(+), 31 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 069640e..231b7a8 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -49,13 +49,16 @@ void tty_buffer_free_all(struct tty_port *port)
while ((p = buf->head) != NULL) {
buf->head = p->next;
- kfree(p);
+ if (p->size > 0)
+ kfree(p);
}
llist = llist_del_all(&buf->free);
llist_for_each_entry_safe(p, next, llist, free)
kfree(p);
- buf->tail = NULL;
+ tty_buffer_reset(&buf->sentinel, 0);
+ buf->head = &buf->sentinel;
+ buf->tail = &buf->sentinel;
buf->memory_used = 0;
}
@@ -120,7 +123,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
if (b->size > MIN_TTYB_SIZE)
kfree(b);
- else
+ else if (b->size > 0)
llist_add(&b->free, &buf->free);
}
@@ -140,8 +143,6 @@ static void __tty_buffer_flush(struct tty_port *port)
struct tty_bufhead *buf = &port->buf;
struct tty_buffer *next;
- if (unlikely(buf->head == NULL))
- return;
while ((next = buf->head->next) != NULL) {
tty_buffer_free(port, buf->head);
buf->head = next;
@@ -200,23 +201,14 @@ int tty_buffer_request_room(struct tty_port *port, size_t size)
int left;
unsigned long flags;
spin_lock_irqsave(&buf->lock, flags);
- /* OPTIMISATION: We could keep a per tty "zero" sized buffer to
- remove this conditional if its worth it. This would be invisible
- to the callers */
b = buf->tail;
- if (b != NULL)
- left = b->size - b->used;
- else
- left = 0;
+ left = b->size - b->used;
if (left < size) {
/* This is the slow path - looking for new buffers to use */
if ((n = tty_buffer_alloc(port, size)) != NULL) {
- if (b != NULL) {
- b->next = n;
- b->commit = b->used;
- } else
- buf->head = n;
+ b->next = n;
+ b->commit = b->used;
buf->tail = n;
} else
size = left;
@@ -247,10 +239,8 @@ int tty_insert_flip_string_fixed_flag(struct tty_port *port,
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
int space = tty_buffer_request_room(port, goal);
struct tty_buffer *tb = port->buf.tail;
- /* If there is no space then tb may be NULL */
- if (unlikely(space == 0)) {
+ if (unlikely(space == 0))
break;
- }
memcpy(char_buf_ptr(tb, tb->used), chars, space);
memset(flag_buf_ptr(tb, tb->used), flag, space);
tb->used += space;
@@ -285,10 +275,8 @@ int tty_insert_flip_string_flags(struct tty_port *port,
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
int space = tty_buffer_request_room(port, goal);
struct tty_buffer *tb = port->buf.tail;
- /* If there is no space then tb may be NULL */
- if (unlikely(space == 0)) {
+ if (unlikely(space == 0))
break;
- }
memcpy(char_buf_ptr(tb, tb->used), chars, space);
memcpy(flag_buf_ptr(tb, tb->used), flags, space);
tb->used += space;
@@ -322,8 +310,7 @@ void tty_schedule_flip(struct tty_port *port)
WARN_ON(port->low_latency);
spin_lock_irqsave(&buf->lock, flags);
- if (buf->tail != NULL)
- buf->tail->commit = buf->tail->used;
+ buf->tail->commit = buf->tail->used;
spin_unlock_irqrestore(&buf->lock, flags);
schedule_work(&buf->work);
}
@@ -438,8 +425,8 @@ static void flush_to_ldisc(struct work_struct *work)
spin_lock_irqsave(&buf->lock, flags);
if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
- struct tty_buffer *head;
- while ((head = buf->head) != NULL) {
+ while (1) {
+ struct tty_buffer *head = buf->head;
int count;
count = head->commit - head->read;
@@ -509,8 +496,7 @@ void tty_flip_buffer_push(struct tty_port *port)
unsigned long flags;
spin_lock_irqsave(&buf->lock, flags);
- if (buf->tail != NULL)
- buf->tail->commit = buf->tail->used;
+ buf->tail->commit = buf->tail->used;
spin_unlock_irqrestore(&buf->lock, flags);
if (port->low_latency)
@@ -535,8 +521,9 @@ void tty_buffer_init(struct tty_port *port)
struct tty_bufhead *buf = &port->buf;
spin_lock_init(&buf->lock);
- buf->head = NULL;
- buf->tail = NULL;
+ tty_buffer_reset(&buf->sentinel, 0);
+ buf->head = &buf->sentinel;
+ buf->tail = &buf->sentinel;
init_llist_head(&buf->free);
buf->memory_used = 0;
INIT_WORK(&buf->work, flush_to_ldisc);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 5043b12..2e93eb8 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -67,6 +67,7 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
struct tty_bufhead {
struct work_struct work;
spinlock_t lock;
+ struct tty_buffer sentinel;
struct tty_buffer *head; /* Queue head */
struct tty_buffer *tail; /* Active buffer */
struct llist_head free; /* Free queue head */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 08/16] tty: Track flip buffer memory limit atomically
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (6 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 07/16] tty: Simplify flip buffer list with 0-sized sentinel Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 09/16] tty: Make driver-side flip buffers lockless Peter Hurley
` (9 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Lockless flip buffers require atomically updating the bytes-in-use
watermark.
The pty driver also peeks at the watermark value to limit
memory consumption to a much lower value than the default; query
the watermark with new fn, tty_buffer_space_avail().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/pty.c | 10 +++-------
drivers/tty/tty_buffer.c | 37 +++++++++++++++++++++++++++++++------
include/linux/tty.h | 3 +--
include/linux/tty_flip.h | 1 +
4 files changed, 36 insertions(+), 15 deletions(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index bbd9693..0634dd9 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -89,17 +89,13 @@ static void pty_unthrottle(struct tty_struct *tty)
* pty_space - report space left for writing
* @to: tty we are writing into
*
- * The tty buffers allow 64K but we sneak a peak and clip at 8K this
- * allows a lot of overspill room for echo and other fun messes to
- * be handled properly
+ * Limit the buffer space used by ptys to 8k.
*/
static int pty_space(struct tty_struct *to)
{
- int n = 8192 - to->port->buf.memory_used;
- if (n < 0)
- return 0;
- return n;
+ int n = tty_buffer_space_avail(to->port);
+ return min(n, 8192);
}
/**
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 231b7a8..5d5a564 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -22,6 +22,31 @@
#define MIN_TTYB_SIZE 256
#define TTYB_ALIGN_MASK 255
+/*
+ * Byte threshold to limit memory consumption for flip buffers.
+ * The actual memory limit is > 2x this amount.
+ */
+#define TTYB_MEM_LIMIT 65536
+
+
+/**
+ * tty_buffer_space_avail - return unused buffer space
+ * @port - tty_port owning the flip buffer
+ *
+ * Returns the # of bytes which can be written by the driver without
+ * reaching the buffer limit.
+ *
+ * Note: this does not guarantee that memory is available to write
+ * the returned # of bytes (use tty_prepare_flip_string_xxx() to
+ * pre-allocate if memory guarantee is required).
+ */
+
+int tty_buffer_space_avail(struct tty_port *port)
+{
+ int space = TTYB_MEM_LIMIT - atomic_read(&port->buf.memory_used);
+ return max(space, 0);
+}
+
static void tty_buffer_reset(struct tty_buffer *p, size_t size)
{
p->used = 0;
@@ -59,7 +84,8 @@ void tty_buffer_free_all(struct tty_port *port)
tty_buffer_reset(&buf->sentinel, 0);
buf->head = &buf->sentinel;
buf->tail = &buf->sentinel;
- buf->memory_used = 0;
+
+ atomic_set(&buf->memory_used, 0);
}
/**
@@ -92,7 +118,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
- if (port->buf.memory_used + size > 65536)
+ if (atomic_read(&port->buf.memory_used) > TTYB_MEM_LIMIT)
return NULL;
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if (p == NULL)
@@ -100,7 +126,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
found:
tty_buffer_reset(p, size);
- port->buf.memory_used += size;
+ atomic_add(size, &port->buf.memory_used);
return p;
}
@@ -118,8 +144,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
struct tty_bufhead *buf = &port->buf;
/* Dumb strategy for now - should keep some stats */
- buf->memory_used -= b->size;
- WARN_ON(buf->memory_used < 0);
+ WARN_ON(atomic_sub_return(b->size, &buf->memory_used) < 0);
if (b->size > MIN_TTYB_SIZE)
kfree(b);
@@ -525,7 +550,7 @@ void tty_buffer_init(struct tty_port *port)
buf->head = &buf->sentinel;
buf->tail = &buf->sentinel;
init_llist_head(&buf->free);
- buf->memory_used = 0;
+ atomic_set(&buf->memory_used, 0);
INIT_WORK(&buf->work, flush_to_ldisc);
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 2e93eb8..7c12454 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -71,8 +71,7 @@ struct tty_bufhead {
struct tty_buffer *head; /* Queue head */
struct tty_buffer *tail; /* Active buffer */
struct llist_head free; /* Free queue head */
- int memory_used; /* Buffer space used excluding
- free queue */
+ atomic_t memory_used; /* In-use buffers excluding free list */
};
/*
* When a break, frame error, or parity error happens, these codes are
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index ad03039..6944ed2 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -1,6 +1,7 @@
#ifndef _LINUX_TTY_FLIP_H
#define _LINUX_TTY_FLIP_H
+extern int tty_buffer_space_avail(struct tty_port *port);
extern int tty_buffer_request_room(struct tty_port *port, size_t size);
extern int tty_insert_flip_string_flags(struct tty_port *port,
const unsigned char *chars, const char *flags, size_t size);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 09/16] tty: Make driver-side flip buffers lockless
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (7 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 08/16] tty: Track flip buffer memory limit atomically Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 10/16] tty: Ensure single-threaded flip buffer consumer with mutex Peter Hurley
` (8 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Driver-side flip buffer input is already single-threaded; 'publish'
the .next link as the last operation on the tail buffer so the
'consumer' sees the already-completed flip buffer.
The commit buffer index is already 'published' by driver-side functions.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 31 ++++---------------------------
1 file changed, 4 insertions(+), 27 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 5d5a564..685757c 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -62,8 +62,6 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size)
*
* Remove all the buffers pending on a tty whether queued with data
* or in the free ring. Must be called when the tty is no longer in use
- *
- * Locking: none
*/
void tty_buffer_free_all(struct tty_port *port)
@@ -216,29 +214,26 @@ void tty_buffer_flush(struct tty_struct *tty)
*
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
- *
- * Locking: Takes port->buf.lock
*/
int tty_buffer_request_room(struct tty_port *port, size_t size)
{
struct tty_bufhead *buf = &port->buf;
struct tty_buffer *b, *n;
int left;
- unsigned long flags;
- spin_lock_irqsave(&buf->lock, flags);
+
b = buf->tail;
left = b->size - b->used;
if (left < size) {
/* This is the slow path - looking for new buffers to use */
if ((n = tty_buffer_alloc(port, size)) != NULL) {
- b->next = n;
- b->commit = b->used;
buf->tail = n;
+ b->commit = b->used;
+ smp_mb();
+ b->next = n;
} else
size = left;
}
- spin_unlock_irqrestore(&buf->lock, flags);
return size;
}
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
@@ -252,8 +247,6 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room);
*
* Queue a series of bytes to the tty buffering. All the characters
* passed are marked with the supplied flag. Returns the number added.
- *
- * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_fixed_flag(struct tty_port *port,
@@ -288,8 +281,6 @@ EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag);
* Queue a series of bytes to the tty buffering. For each character
* the flags array indicates the status of the character. Returns the
* number added.
- *
- * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_flags(struct tty_port *port,
@@ -324,19 +315,14 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags);
* processing by the line discipline.
* Note that this function can only be used when the low_latency flag
* is unset. Otherwise the workqueue won't be flushed.
- *
- * Locking: Takes port->buf.lock
*/
void tty_schedule_flip(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- unsigned long flags;
WARN_ON(port->low_latency);
- spin_lock_irqsave(&buf->lock, flags);
buf->tail->commit = buf->tail->used;
- spin_unlock_irqrestore(&buf->lock, flags);
schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_schedule_flip);
@@ -352,8 +338,6 @@ EXPORT_SYMBOL(tty_schedule_flip);
* accounted for as ready for normal characters. This is used for drivers
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
- *
- * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars,
@@ -382,8 +366,6 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
* accounted for as ready for characters. This is used for drivers
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
- *
- * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string_flags(struct tty_port *port,
@@ -511,18 +493,13 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
*
* In the event of the queue being busy for flipping the work will be
* held off and retried later.
- *
- * Locking: tty buffer lock. Driver locks in low latency mode.
*/
void tty_flip_buffer_push(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- unsigned long flags;
- spin_lock_irqsave(&buf->lock, flags);
buf->tail->commit = buf->tail->used;
- spin_unlock_irqrestore(&buf->lock, flags);
if (port->low_latency)
flush_to_ldisc(&buf->work);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 10/16] tty: Ensure single-threaded flip buffer consumer with mutex
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (8 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 09/16] tty: Make driver-side flip buffers lockless Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 11/16] tty: Only perform flip buffer flush from tty_buffer_flush() Peter Hurley
` (7 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
The buffer work may race with parallel tty_buffer_flush. Use a
mutex to guarantee exclusive modify access to the head flip
buffer.
Remove the unneeded spin lock.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/staging/dgrp/dgrp_tty.c | 2 ++
drivers/tty/tty_buffer.c | 40 +++++++++++++++++++---------------------
include/linux/tty.h | 2 +-
3 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/dgrp/dgrp_tty.c b/drivers/staging/dgrp/dgrp_tty.c
index 654f601..0d52de3 100644
--- a/drivers/staging/dgrp/dgrp_tty.c
+++ b/drivers/staging/dgrp/dgrp_tty.c
@@ -1120,7 +1120,9 @@ static void dgrp_tty_close(struct tty_struct *tty, struct file *file)
if (!sent_printer_offstr)
dgrp_tty_flush_buffer(tty);
+ spin_unlock_irqrestore(&nd->nd_lock, lock_flags);
tty_ldisc_flush(tty);
+ spin_lock_irqsave(&nd->nd_lock, lock_flags);
break;
}
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 685757c..c3c606c 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -157,8 +157,6 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
* flush all the buffers containing receive data. Caller must
* hold the buffer lock and must have ensured no parallel flush to
* ldisc is running.
- *
- * Locking: Caller must hold tty->buf.lock
*/
static void __tty_buffer_flush(struct tty_port *port)
@@ -182,29 +180,29 @@ static void __tty_buffer_flush(struct tty_port *port)
* being processed by flush_to_ldisc then we defer the processing
* to that function
*
- * Locking: none
+ * Locking: takes flush_mutex to ensure single-threaded flip buffer
+ * 'consumer'
*/
void tty_buffer_flush(struct tty_struct *tty)
{
struct tty_port *port = tty->port;
struct tty_bufhead *buf = &port->buf;
- unsigned long flags;
-
- spin_lock_irqsave(&buf->lock, flags);
+ mutex_lock(&buf->flush_mutex);
/* If the data is being pushed to the tty layer then we can't
process it here. Instead set a flag and the flush_to_ldisc
path will process the flush request before it exits */
if (test_bit(TTYP_FLUSHING, &port->iflags)) {
set_bit(TTYP_FLUSHPENDING, &port->iflags);
- spin_unlock_irqrestore(&buf->lock, flags);
+ mutex_unlock(&buf->flush_mutex);
wait_event(tty->read_wait,
test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
return;
- } else
- __tty_buffer_flush(port);
- spin_unlock_irqrestore(&buf->lock, flags);
+ }
+
+ __tty_buffer_flush(port);
+ mutex_unlock(&buf->flush_mutex);
}
/**
@@ -408,9 +406,10 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
* This routine is called out of the software interrupt to flush data
* from the buffer chain to the line discipline.
*
- * Locking: holds tty->buf.lock to guard buffer list. Drops the lock
- * while invoking the line discipline receive_buf method. The
- * receive_buf method is single threaded for each tty instance.
+ * The receive_buf method is single threaded for each tty instance.
+ *
+ * Locking: takes flush_mutex to ensure single-threaded flip buffer
+ * 'consumer'
*/
static void flush_to_ldisc(struct work_struct *work)
@@ -418,7 +417,6 @@ static void flush_to_ldisc(struct work_struct *work)
struct tty_port *port = container_of(work, struct tty_port, buf.work);
struct tty_bufhead *buf = &port->buf;
struct tty_struct *tty;
- unsigned long flags;
struct tty_ldisc *disc;
tty = port->itty;
@@ -429,7 +427,7 @@ static void flush_to_ldisc(struct work_struct *work)
if (disc == NULL)
return;
- spin_lock_irqsave(&buf->lock, flags);
+ mutex_lock(&buf->flush_mutex);
if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
while (1) {
@@ -444,11 +442,13 @@ static void flush_to_ldisc(struct work_struct *work)
tty_buffer_free(port, head);
continue;
}
- spin_unlock_irqrestore(&buf->lock, flags);
+
+ mutex_unlock(&buf->flush_mutex);
count = receive_buf(tty, head, count);
- spin_lock_irqsave(&buf->lock, flags);
+ mutex_lock(&buf->flush_mutex);
+
/* Ldisc or user is trying to flush the buffers.
We may have a deferred request to flush the
input buffer, if so pull the chain under the lock
@@ -464,7 +464,7 @@ static void flush_to_ldisc(struct work_struct *work)
clear_bit(TTYP_FLUSHING, &port->iflags);
}
- spin_unlock_irqrestore(&buf->lock, flags);
+ mutex_unlock(&buf->flush_mutex);
tty_ldisc_deref(disc);
}
@@ -514,15 +514,13 @@ EXPORT_SYMBOL(tty_flip_buffer_push);
*
* Set up the initial state of the buffer management for a tty device.
* Must be called before the other tty buffer functions are used.
- *
- * Locking: none
*/
void tty_buffer_init(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- spin_lock_init(&buf->lock);
+ mutex_init(&buf->flush_mutex);
tty_buffer_reset(&buf->sentinel, 0);
buf->head = &buf->sentinel;
buf->tail = &buf->sentinel;
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 7c12454..1c8fef0 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -66,7 +66,7 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
struct tty_bufhead {
struct work_struct work;
- spinlock_t lock;
+ struct mutex flush_mutex;
struct tty_buffer sentinel;
struct tty_buffer *head; /* Queue head */
struct tty_buffer *tail; /* Active buffer */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 11/16] tty: Only perform flip buffer flush from tty_buffer_flush()
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (9 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 10/16] tty: Ensure single-threaded flip buffer consumer with mutex Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 12/16] tty: Avoid false-sharing flip buffer ptrs Peter Hurley
` (6 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Now that dropping the buffer lock is not necessary (as result of
converting the spin lock to a mutex), the flip buffer flush no
longer needs to be handled by the buffer work.
Simply signal a flush is required; the buffer work will exit the
i/o loop, which allows tty_buffer_flush() to proceed.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 63 ++++++++++++++++--------------------------------
include/linux/tty.h | 1 -
2 files changed, 21 insertions(+), 43 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index c3c606c..39cae61 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -189,19 +189,11 @@ void tty_buffer_flush(struct tty_struct *tty)
struct tty_port *port = tty->port;
struct tty_bufhead *buf = &port->buf;
- mutex_lock(&buf->flush_mutex);
- /* If the data is being pushed to the tty layer then we can't
- process it here. Instead set a flag and the flush_to_ldisc
- path will process the flush request before it exits */
- if (test_bit(TTYP_FLUSHING, &port->iflags)) {
- set_bit(TTYP_FLUSHPENDING, &port->iflags);
- mutex_unlock(&buf->flush_mutex);
- wait_event(tty->read_wait,
- test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
- return;
- }
+ set_bit(TTYP_FLUSHPENDING, &port->iflags);
+ mutex_lock(&buf->flush_mutex);
__tty_buffer_flush(port);
+ clear_bit(TTYP_FLUSHPENDING, &port->iflags);
mutex_unlock(&buf->flush_mutex);
}
@@ -429,39 +421,26 @@ static void flush_to_ldisc(struct work_struct *work)
mutex_lock(&buf->flush_mutex);
- if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
- while (1) {
- struct tty_buffer *head = buf->head;
- int count;
-
- count = head->commit - head->read;
- if (!count) {
- if (head->next == NULL)
- break;
- buf->head = head->next;
- tty_buffer_free(port, head);
- continue;
- }
-
- mutex_unlock(&buf->flush_mutex);
-
- count = receive_buf(tty, head, count);
-
- mutex_lock(&buf->flush_mutex);
-
- /* Ldisc or user is trying to flush the buffers.
- We may have a deferred request to flush the
- input buffer, if so pull the chain under the lock
- and empty the queue */
- if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
- __tty_buffer_flush(port);
- clear_bit(TTYP_FLUSHPENDING, &port->iflags);
- wake_up(&tty->read_wait);
- break;
- } else if (!count)
+ while (1) {
+ struct tty_buffer *head = buf->head;
+ int count;
+
+ /* Ldisc or user is trying to flush the buffers. */
+ if (test_bit(TTYP_FLUSHPENDING, &port->iflags))
+ break;
+
+ count = head->commit - head->read;
+ if (!count) {
+ if (head->next == NULL)
break;
+ buf->head = head->next;
+ tty_buffer_free(port, head);
+ continue;
}
- clear_bit(TTYP_FLUSHING, &port->iflags);
+
+ count = receive_buf(tty, head, count);
+ if (!count)
+ break;
}
mutex_unlock(&buf->flush_mutex);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 1c8fef0..1d5bacc 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -213,7 +213,6 @@ struct tty_port {
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
unsigned long iflags; /* TTYP_ internal flags */
-#define TTYP_FLUSHING 1 /* Flushing to ldisc in progress */
#define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */
unsigned char console:1, /* port is a console */
low_latency:1; /* direct buffer flush */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 12/16] tty: Avoid false-sharing flip buffer ptrs
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (10 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 11/16] tty: Only perform flip buffer flush from tty_buffer_flush() Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 13/16] tty: Use non-atomic state to signal flip buffer flush pending Peter Hurley
` (5 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Separate the head and tail ptrs to avoid cache-line contention
(so called 'false-sharing') between concurrent threads.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
include/linux/tty.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 1d5bacc..b8e8adf 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -65,13 +65,13 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
struct tty_bufhead {
+ struct tty_buffer *head; /* Queue head */
struct work_struct work;
struct mutex flush_mutex;
struct tty_buffer sentinel;
- struct tty_buffer *head; /* Queue head */
- struct tty_buffer *tail; /* Active buffer */
struct llist_head free; /* Free queue head */
atomic_t memory_used; /* In-use buffers excluding free list */
+ struct tty_buffer *tail; /* Active buffer */
};
/*
* When a break, frame error, or parity error happens, these codes are
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 13/16] tty: Use non-atomic state to signal flip buffer flush pending
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (11 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 12/16] tty: Avoid false-sharing flip buffer ptrs Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 14/16] tty: Merge __tty_flush_buffer() into lone call site Peter Hurley
` (4 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Atomic bit ops are no longer required to indicate a flip buffer
flush is pending, as the flush_mutex is sufficient barrier.
Remove the unnecessary port .iflags field and localize flip buffer
state to struct tty_bufhead.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 7 ++++---
include/linux/tty.h | 3 +--
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 39cae61..fb042b9 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -189,11 +189,11 @@ void tty_buffer_flush(struct tty_struct *tty)
struct tty_port *port = tty->port;
struct tty_bufhead *buf = &port->buf;
- set_bit(TTYP_FLUSHPENDING, &port->iflags);
+ buf->flushpending = 1;
mutex_lock(&buf->flush_mutex);
__tty_buffer_flush(port);
- clear_bit(TTYP_FLUSHPENDING, &port->iflags);
+ buf->flushpending = 0;
mutex_unlock(&buf->flush_mutex);
}
@@ -426,7 +426,7 @@ static void flush_to_ldisc(struct work_struct *work)
int count;
/* Ldisc or user is trying to flush the buffers. */
- if (test_bit(TTYP_FLUSHPENDING, &port->iflags))
+ if (buf->flushpending)
break;
count = head->commit - head->read;
@@ -505,6 +505,7 @@ void tty_buffer_init(struct tty_port *port)
buf->tail = &buf->sentinel;
init_llist_head(&buf->free);
atomic_set(&buf->memory_used, 0);
+ buf->flushpending = 0;
INIT_WORK(&buf->work, flush_to_ldisc);
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index b8e8adf..991575f 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -68,6 +68,7 @@ struct tty_bufhead {
struct tty_buffer *head; /* Queue head */
struct work_struct work;
struct mutex flush_mutex;
+ unsigned int flushpending:1;
struct tty_buffer sentinel;
struct llist_head free; /* Free queue head */
atomic_t memory_used; /* In-use buffers excluding free list */
@@ -212,8 +213,6 @@ struct tty_port {
wait_queue_head_t close_wait; /* Close waiters */
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
- unsigned long iflags; /* TTYP_ internal flags */
-#define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */
unsigned char console:1, /* port is a console */
low_latency:1; /* direct buffer flush */
struct mutex mutex; /* Locking */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 14/16] tty: Merge __tty_flush_buffer() into lone call site
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (12 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 13/16] tty: Use non-atomic state to signal flip buffer flush pending Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 15/16] tty: Fix unsafe vt paste_selection() Peter Hurley
` (3 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
__tty_flush_buffer() is now only called by tty_flush_buffer();
merge functions.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 29 ++++++-----------------------
1 file changed, 6 insertions(+), 23 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index fb042b9..dbe4a71 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -151,28 +151,6 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
}
/**
- * __tty_buffer_flush - flush full tty buffers
- * @tty: tty to flush
- *
- * flush all the buffers containing receive data. Caller must
- * hold the buffer lock and must have ensured no parallel flush to
- * ldisc is running.
- */
-
-static void __tty_buffer_flush(struct tty_port *port)
-{
- struct tty_bufhead *buf = &port->buf;
- struct tty_buffer *next;
-
- while ((next = buf->head->next) != NULL) {
- tty_buffer_free(port, buf->head);
- buf->head = next;
- }
- WARN_ON(buf->head != buf->tail);
- buf->head->read = buf->head->commit;
-}
-
-/**
* tty_buffer_flush - flush full tty buffers
* @tty: tty to flush
*
@@ -188,11 +166,16 @@ void tty_buffer_flush(struct tty_struct *tty)
{
struct tty_port *port = tty->port;
struct tty_bufhead *buf = &port->buf;
+ struct tty_buffer *next;
buf->flushpending = 1;
mutex_lock(&buf->flush_mutex);
- __tty_buffer_flush(port);
+ while ((next = buf->head->next) != NULL) {
+ tty_buffer_free(port, buf->head);
+ buf->head = next;
+ }
+ buf->head->read = buf->head->commit;
buf->flushpending = 0;
mutex_unlock(&buf->flush_mutex);
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 15/16] tty: Fix unsafe vt paste_selection()
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (13 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 14/16] tty: Merge __tty_flush_buffer() into lone call site Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 13:36 ` [PATCH v2 16/16] tty: Remove private constant from global namespace Peter Hurley
` (2 subsequent siblings)
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Convert the tty_buffer_flush() exclusion mechanism to a
public interface - tty_buffer_lock/unlock_exclusive() - and use
the interface to safely write the paste selection to the line
discipline.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 61 ++++++++++++++++++++++++++++++++++++----------
drivers/tty/vt/selection.c | 4 ++-
include/linux/tty.h | 4 +--
include/linux/tty_flip.h | 3 +++
4 files changed, 56 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index dbe4a71..f22e116 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -30,6 +30,42 @@
/**
+ * tty_buffer_lock_exclusive - gain exclusive access to buffer
+ * tty_buffer_unlock_exclusive - release exclusive access
+ *
+ * @port - tty_port owning the flip buffer
+ *
+ * Guarantees safe use of the line discipline's receive_buf() method by
+ * excluding the buffer work and any pending flush from using the flip
+ * buffer. Data can continue to be added concurrently to the flip buffer
+ * from the driver side.
+ *
+ * On release, the buffer work is restarted if there is data in the
+ * flip buffer
+ */
+
+void tty_buffer_lock_exclusive(struct tty_port *port)
+{
+ struct tty_bufhead *buf = &port->buf;
+
+ atomic_inc(&buf->priority);
+ mutex_lock(&buf->lock);
+}
+
+void tty_buffer_unlock_exclusive(struct tty_port *port)
+{
+ struct tty_bufhead *buf = &port->buf;
+ int restart;
+
+ restart = buf->head->commit != buf->head->read;
+
+ atomic_dec(&buf->priority);
+ mutex_unlock(&buf->lock);
+ if (restart)
+ queue_work(system_unbound_wq, &buf->work);
+}
+
+/**
* tty_buffer_space_avail - return unused buffer space
* @port - tty_port owning the flip buffer
*
@@ -158,7 +194,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
* being processed by flush_to_ldisc then we defer the processing
* to that function
*
- * Locking: takes flush_mutex to ensure single-threaded flip buffer
+ * Locking: takes buffer lock to ensure single-threaded flip buffer
* 'consumer'
*/
@@ -168,16 +204,16 @@ void tty_buffer_flush(struct tty_struct *tty)
struct tty_bufhead *buf = &port->buf;
struct tty_buffer *next;
- buf->flushpending = 1;
+ atomic_inc(&buf->priority);
- mutex_lock(&buf->flush_mutex);
+ mutex_lock(&buf->lock);
while ((next = buf->head->next) != NULL) {
tty_buffer_free(port, buf->head);
buf->head = next;
}
buf->head->read = buf->head->commit;
- buf->flushpending = 0;
- mutex_unlock(&buf->flush_mutex);
+ atomic_dec(&buf->priority);
+ mutex_unlock(&buf->lock);
}
/**
@@ -383,7 +419,7 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
*
* The receive_buf method is single threaded for each tty instance.
*
- * Locking: takes flush_mutex to ensure single-threaded flip buffer
+ * Locking: takes buffer lock to ensure single-threaded flip buffer
* 'consumer'
*/
@@ -402,14 +438,14 @@ static void flush_to_ldisc(struct work_struct *work)
if (disc == NULL)
return;
- mutex_lock(&buf->flush_mutex);
+ mutex_lock(&buf->lock);
while (1) {
struct tty_buffer *head = buf->head;
int count;
- /* Ldisc or user is trying to flush the buffers. */
- if (buf->flushpending)
+ /* Ldisc or user is trying to gain exclusive access */
+ if (atomic_read(&buf->priority))
break;
count = head->commit - head->read;
@@ -426,7 +462,7 @@ static void flush_to_ldisc(struct work_struct *work)
break;
}
- mutex_unlock(&buf->flush_mutex);
+ mutex_unlock(&buf->lock);
tty_ldisc_deref(disc);
}
@@ -482,13 +518,12 @@ void tty_buffer_init(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- mutex_init(&buf->flush_mutex);
+ mutex_init(&buf->lock);
tty_buffer_reset(&buf->sentinel, 0);
buf->head = &buf->sentinel;
buf->tail = &buf->sentinel;
init_llist_head(&buf->free);
atomic_set(&buf->memory_used, 0);
- buf->flushpending = 0;
+ atomic_set(&buf->priority, 0);
INIT_WORK(&buf->work, flush_to_ldisc);
}
-
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 2ca8d6b..ea27804 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -24,6 +24,7 @@
#include <linux/selection.h>
#include <linux/tiocl.h>
#include <linux/console.h>
+#include <linux/tty_flip.h>
/* Don't take this from <ctype.h>: 011-015 on the screen aren't spaces */
#define isspace(c) ((c) == ' ')
@@ -346,8 +347,8 @@ int paste_selection(struct tty_struct *tty)
console_unlock();
ld = tty_ldisc_ref_wait(tty);
+ tty_buffer_lock_exclusive(&vc->port);
- /* FIXME: this is completely unsafe */
add_wait_queue(&vc->paste_wait, &wait);
while (sel_buffer && sel_buffer_lth > pasted) {
set_current_state(TASK_INTERRUPTIBLE);
@@ -363,6 +364,7 @@ int paste_selection(struct tty_struct *tty)
remove_wait_queue(&vc->paste_wait, &wait);
__set_current_state(TASK_RUNNING);
+ tty_buffer_unlock_exclusive(&vc->port);
tty_ldisc_deref(ld);
return 0;
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 991575f..7a9a3b0 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -67,8 +67,8 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
struct tty_bufhead {
struct tty_buffer *head; /* Queue head */
struct work_struct work;
- struct mutex flush_mutex;
- unsigned int flushpending:1;
+ struct mutex lock;
+ atomic_t priority;
struct tty_buffer sentinel;
struct llist_head free; /* Free queue head */
atomic_t memory_used; /* In-use buffers excluding free list */
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index 6944ed2..21ddd7d 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -32,4 +32,7 @@ static inline int tty_insert_flip_string(struct tty_port *port,
return tty_insert_flip_string_fixed_flag(port, chars, TTY_NORMAL, size);
}
+extern void tty_buffer_lock_exclusive(struct tty_port *port);
+extern void tty_buffer_unlock_exclusive(struct tty_port *port);
+
#endif /* _LINUX_TTY_FLIP_H */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 16/16] tty: Remove private constant from global namespace
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (14 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 15/16] tty: Fix unsafe vt paste_selection() Peter Hurley
@ 2013-06-15 13:36 ` Peter Hurley
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
2013-07-23 23:53 ` [PATCH v2 00/16] lockless tty flip buffers Greg Kroah-Hartman
17 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 13:36 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
TTY_BUFFER_PAGE is only used within drivers/tty/tty_buffer.c;
relocate to that file scope.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_buffer.c | 10 ++++++++++
include/linux/tty.h | 11 -----------
2 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index f22e116..c043136f 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -28,6 +28,16 @@
*/
#define TTYB_MEM_LIMIT 65536
+/*
+ * We default to dicing tty buffer allocations to this many characters
+ * in order to avoid multiple page allocations. We know the size of
+ * tty_buffer itself but it must also be taken into account that the
+ * the buffer is 256 byte aligned. See tty_buffer_find for the allocation
+ * logic this must match
+ */
+
+#define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
+
/**
* tty_buffer_lock_exclusive - gain exclusive access to buffer
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 7a9a3b0..5fd5d6f 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -53,17 +53,6 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
return (char *)char_buf_ptr(b, ofs) + b->size;
}
-/*
- * We default to dicing tty buffer allocations to this many characters
- * in order to avoid multiple page allocations. We know the size of
- * tty_buffer itself but it must also be taken into account that the
- * the buffer is 256 byte aligned. See tty_buffer_find for the allocation
- * logic this must match
- */
-
-#define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
-
-
struct tty_bufhead {
struct tty_buffer *head; /* Queue head */
struct work_struct work;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 0/9] mostly lockless tty echo
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (15 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 16/16] tty: Remove private constant from global namespace Peter Hurley
@ 2013-06-15 14:04 ` Peter Hurley
2013-06-15 14:04 ` [PATCH v2 1/9] n_tty: Remove unused echo_overrun field Peter Hurley
` (10 more replies)
2013-07-23 23:53 ` [PATCH v2 00/16] lockless tty flip buffers Greg Kroah-Hartman
17 siblings, 11 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
** v2 changes **
- Rebased on v2 of 'lockless tty flip buffers'
This 3rd of 4 patchsets implements a mostly-lockless tty echo output.
Because echoing is performed solely by the single-threaded ldisc
receive_buf() method, most of the lockless requirements are already
in-place. The main existing complications were;
1) Echoing could overrun itself. A fixed-size buffer is used to record
the operations necessary when outputting the echoes; the most recent
echo data is preserved.
2) An attempt to push unprocessed echoes is made by the n_tty_write method
(on a different thread) before attempting write output.
The overrun condition is solved by outputting the echoes in blocks and
ensuring that at least that much space is available each time an echo
operation is committed. At the conclusion of each flip buffer received,
any remaining unprocessed echoes are output.
This block output method is particularly effective when there is no reader
(the tty is output-only) and termios is misconfigured with echo enabled.
The concurrent access by the n_tty_write() method is already excluded
by the existing output_lock mutex.
Peter Hurley (9):
n_tty: Remove unused echo_overrun field
n_tty: Use separate head and tail indices for echo_buf
n_tty: Replace echo_cnt with computed value
n_tty: Remove echo_lock
n_tty: Eliminate echo_commit memory barrier
n_tty: Process echoes in blocks
n_tty: Only flush echo output if actually output
n_tty: Eliminate counter in __process_echoes
n_tty: Avoid false-sharing echo buffer indices
drivers/tty/n_tty.c | 248 ++++++++++++++++++++++++----------------------------
1 file changed, 113 insertions(+), 135 deletions(-)
--
1.8.1.2
^ permalink raw reply [flat|nested] 238+ messages in thread* [PATCH v2 1/9] n_tty: Remove unused echo_overrun field
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
@ 2013-06-15 14:04 ` Peter Hurley
2013-06-15 14:04 ` [PATCH v2 2/9] n_tty: Use separate head and tail indices for echo_buf Peter Hurley
` (9 subsequent siblings)
10 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
The echo_overrun field is only assigned and never tested; remove it.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 2321d6a..160d9d2 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -96,7 +96,6 @@ struct n_tty_data {
/* must hold exclusive termios_rwsem to reset these */
unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
- unsigned char echo_overrun:1;
/* shared by producer and consumer */
char *read_buf;
@@ -325,7 +324,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
mutex_lock(&ldata->echo_lock);
- ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
+ ldata->echo_pos = ldata->echo_cnt = 0;
mutex_unlock(&ldata->echo_lock);
ldata->erasing = 0;
@@ -781,14 +780,11 @@ static void process_echoes(struct tty_struct *tty)
if (nr == 0) {
ldata->echo_pos = 0;
ldata->echo_cnt = 0;
- ldata->echo_overrun = 0;
} else {
int num_processed = ldata->echo_cnt - nr;
ldata->echo_pos += num_processed;
ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
ldata->echo_cnt = nr;
- if (num_processed > 0)
- ldata->echo_overrun = 0;
}
mutex_unlock(&ldata->echo_lock);
@@ -834,8 +830,6 @@ static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
ldata->echo_pos++;
}
ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
-
- ldata->echo_overrun = 1;
} else {
new_byte_pos = ldata->echo_pos + ldata->echo_cnt;
new_byte_pos &= N_TTY_BUF_SIZE - 1;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 2/9] n_tty: Use separate head and tail indices for echo_buf
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
2013-06-15 14:04 ` [PATCH v2 1/9] n_tty: Remove unused echo_overrun field Peter Hurley
@ 2013-06-15 14:04 ` Peter Hurley
2013-06-15 14:04 ` [PATCH v2 3/9] n_tty: Replace echo_cnt with computed value Peter Hurley
` (8 subsequent siblings)
10 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Instead of using a single index to track the current echo_buf position,
use a head index when adding to the buffer and a tail index when
consuming from the buffer. Allow these head and tail indices to wrap
at max representable value; perform modulo reduction via helper
functions when accessing the buffer.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 88 +++++++++++++++++++++--------------------------------
1 file changed, 35 insertions(+), 53 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 160d9d2..f90e171 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -108,7 +108,8 @@ struct n_tty_data {
/* protected by echo_lock */
unsigned char *echo_buf;
- unsigned int echo_pos;
+ size_t echo_head;
+ size_t echo_tail;
unsigned int echo_cnt;
/* protected by output lock */
@@ -135,6 +136,16 @@ static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i)
return &ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)];
}
+static inline unsigned char echo_buf(struct n_tty_data *ldata, size_t i)
+{
+ return ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)];
+}
+
+static inline unsigned char *echo_buf_addr(struct n_tty_data *ldata, size_t i)
+{
+ return &ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)];
+}
+
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
@@ -324,7 +335,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
mutex_lock(&ldata->echo_lock);
- ldata->echo_pos = ldata->echo_cnt = 0;
+ ldata->echo_head = ldata->echo_tail = ldata->echo_cnt = 0;
mutex_unlock(&ldata->echo_lock);
ldata->erasing = 0;
@@ -639,8 +650,8 @@ static void process_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
int space, nr;
+ size_t tail;
unsigned char c;
- unsigned char *cp, *buf_end;
if (!ldata->echo_cnt)
return;
@@ -650,14 +661,12 @@ static void process_echoes(struct tty_struct *tty)
space = tty_write_room(tty);
- buf_end = ldata->echo_buf + N_TTY_BUF_SIZE;
- cp = ldata->echo_buf + ldata->echo_pos;
+ tail = ldata->echo_tail;
nr = ldata->echo_cnt;
while (nr > 0) {
- c = *cp;
+ c = echo_buf(ldata, tail);
if (c == ECHO_OP_START) {
unsigned char op;
- unsigned char *opp;
int no_space_left = 0;
/*
@@ -665,18 +674,13 @@ static void process_echoes(struct tty_struct *tty)
* operation, get the next byte, which is either the
* op code or a control character value.
*/
- opp = cp + 1;
- if (opp == buf_end)
- opp -= N_TTY_BUF_SIZE;
- op = *opp;
+ op = echo_buf(ldata, tail + 1);
switch (op) {
unsigned int num_chars, num_bs;
case ECHO_OP_ERASE_TAB:
- if (++opp == buf_end)
- opp -= N_TTY_BUF_SIZE;
- num_chars = *opp;
+ num_chars = echo_buf(ldata, tail + 2);
/*
* Determine how many columns to go back
@@ -702,20 +706,20 @@ static void process_echoes(struct tty_struct *tty)
if (ldata->column > 0)
ldata->column--;
}
- cp += 3;
+ tail += 3;
nr -= 3;
break;
case ECHO_OP_SET_CANON_COL:
ldata->canon_column = ldata->column;
- cp += 2;
+ tail += 2;
nr -= 2;
break;
case ECHO_OP_MOVE_BACK_COL:
if (ldata->column > 0)
ldata->column--;
- cp += 2;
+ tail += 2;
nr -= 2;
break;
@@ -728,7 +732,7 @@ static void process_echoes(struct tty_struct *tty)
tty_put_char(tty, ECHO_OP_START);
ldata->column++;
space--;
- cp += 2;
+ tail += 2;
nr -= 2;
break;
@@ -750,7 +754,7 @@ static void process_echoes(struct tty_struct *tty)
tty_put_char(tty, op ^ 0100);
ldata->column += 2;
space -= 2;
- cp += 2;
+ tail += 2;
nr -= 2;
}
@@ -768,24 +772,13 @@ static void process_echoes(struct tty_struct *tty)
tty_put_char(tty, c);
space -= 1;
}
- cp += 1;
+ tail += 1;
nr -= 1;
}
-
- /* When end of circular buffer reached, wrap around */
- if (cp >= buf_end)
- cp -= N_TTY_BUF_SIZE;
}
- if (nr == 0) {
- ldata->echo_pos = 0;
- ldata->echo_cnt = 0;
- } else {
- int num_processed = ldata->echo_cnt - nr;
- ldata->echo_pos += num_processed;
- ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
- ldata->echo_cnt = nr;
- }
+ ldata->echo_tail = tail;
+ ldata->echo_cnt = nr;
mutex_unlock(&ldata->echo_lock);
mutex_unlock(&ldata->output_lock);
@@ -806,37 +799,26 @@ static void process_echoes(struct tty_struct *tty)
static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
- int new_byte_pos;
-
if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
- /* Circular buffer is already at capacity */
- new_byte_pos = ldata->echo_pos;
-
+ size_t head = ldata->echo_head;
/*
* Since the buffer start position needs to be advanced,
* be sure to step by a whole operation byte group.
*/
- if (ldata->echo_buf[ldata->echo_pos] == ECHO_OP_START) {
- if (ldata->echo_buf[(ldata->echo_pos + 1) &
- (N_TTY_BUF_SIZE - 1)] ==
- ECHO_OP_ERASE_TAB) {
- ldata->echo_pos += 3;
+ if (echo_buf(ldata, head) == ECHO_OP_START) {
+ if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB) {
+ ldata->echo_tail += 3;
ldata->echo_cnt -= 2;
} else {
- ldata->echo_pos += 2;
+ ldata->echo_tail += 2;
ldata->echo_cnt -= 1;
}
- } else {
- ldata->echo_pos++;
- }
- ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
- } else {
- new_byte_pos = ldata->echo_pos + ldata->echo_cnt;
- new_byte_pos &= N_TTY_BUF_SIZE - 1;
+ } else
+ ldata->echo_tail++;
+ } else
ldata->echo_cnt++;
- }
- ldata->echo_buf[new_byte_pos] = c;
+ *echo_buf_addr(ldata, ldata->echo_head++) = c;
}
/**
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 3/9] n_tty: Replace echo_cnt with computed value
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
2013-06-15 14:04 ` [PATCH v2 1/9] n_tty: Remove unused echo_overrun field Peter Hurley
2013-06-15 14:04 ` [PATCH v2 2/9] n_tty: Use separate head and tail indices for echo_buf Peter Hurley
@ 2013-06-15 14:04 ` Peter Hurley
2013-06-15 14:04 ` [PATCH v2 4/9] n_tty: Remove echo_lock Peter Hurley
` (7 subsequent siblings)
10 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Prepare for lockless echo_buf handling; compute current byte count
of echo_buf from head and tail indices.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 20 +++++++-------------
1 file changed, 7 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f90e171..68dc9fd 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -110,7 +110,6 @@ struct n_tty_data {
unsigned char *echo_buf;
size_t echo_head;
size_t echo_tail;
- unsigned int echo_cnt;
/* protected by output lock */
unsigned int column;
@@ -335,7 +334,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
mutex_lock(&ldata->echo_lock);
- ldata->echo_head = ldata->echo_tail = ldata->echo_cnt = 0;
+ ldata->echo_head = ldata->echo_tail = 0;
mutex_unlock(&ldata->echo_lock);
ldata->erasing = 0;
@@ -653,7 +652,7 @@ static void process_echoes(struct tty_struct *tty)
size_t tail;
unsigned char c;
- if (!ldata->echo_cnt)
+ if (ldata->echo_head == ldata->echo_tail)
return;
mutex_lock(&ldata->output_lock);
@@ -662,7 +661,7 @@ static void process_echoes(struct tty_struct *tty)
space = tty_write_room(tty);
tail = ldata->echo_tail;
- nr = ldata->echo_cnt;
+ nr = ldata->echo_head - ldata->echo_tail;
while (nr > 0) {
c = echo_buf(ldata, tail);
if (c == ECHO_OP_START) {
@@ -778,7 +777,6 @@ static void process_echoes(struct tty_struct *tty)
}
ldata->echo_tail = tail;
- ldata->echo_cnt = nr;
mutex_unlock(&ldata->echo_lock);
mutex_unlock(&ldata->output_lock);
@@ -799,24 +797,20 @@ static void process_echoes(struct tty_struct *tty)
static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
- if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
+ if (ldata->echo_head - ldata->echo_tail == N_TTY_BUF_SIZE) {
size_t head = ldata->echo_head;
/*
* Since the buffer start position needs to be advanced,
* be sure to step by a whole operation byte group.
*/
if (echo_buf(ldata, head) == ECHO_OP_START) {
- if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB) {
+ if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB)
ldata->echo_tail += 3;
- ldata->echo_cnt -= 2;
- } else {
+ else
ldata->echo_tail += 2;
- ldata->echo_cnt -= 1;
- }
} else
ldata->echo_tail++;
- } else
- ldata->echo_cnt++;
+ }
*echo_buf_addr(ldata, ldata->echo_head++) = c;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 4/9] n_tty: Remove echo_lock
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
` (2 preceding siblings ...)
2013-06-15 14:04 ` [PATCH v2 3/9] n_tty: Replace echo_cnt with computed value Peter Hurley
@ 2013-06-15 14:04 ` Peter Hurley
2013-06-15 14:04 ` [PATCH v2 5/9] n_tty: Eliminate echo_commit memory barrier Peter Hurley
` (6 subsequent siblings)
10 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Adding data to echo_buf (via add_echo_byte()) is guaranteed to be
single-threaded, since all callers are from the n_tty_receive_buf()
path. Processing the echo_buf can be called from either the
n_tty_receive_buf() path or the n_tty_write() path; however, these
callers are already serialized by output_lock.
Publish cumulative echo_head changes to echo_commit; process echo_buf
from echo_tail to echo_commit; remove echo_lock.
On echo_buf overrun, claim output_lock to serialize changes to
echo_tail.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 75 ++++++++++++++++++++---------------------------------
1 file changed, 28 insertions(+), 47 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 68dc9fd..d22c14c 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -106,10 +106,10 @@ struct n_tty_data {
/* consumer-published */
size_t read_tail;
- /* protected by echo_lock */
unsigned char *echo_buf;
size_t echo_head;
size_t echo_tail;
+ size_t echo_commit;
/* protected by output lock */
unsigned int column;
@@ -117,7 +117,6 @@ struct n_tty_data {
struct mutex atomic_read_lock;
struct mutex output_lock;
- struct mutex echo_lock;
};
static inline size_t read_cnt(struct n_tty_data *ldata)
@@ -332,10 +331,7 @@ static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
static void reset_buffer_flags(struct n_tty_data *ldata)
{
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
-
- mutex_lock(&ldata->echo_lock);
- ldata->echo_head = ldata->echo_tail = 0;
- mutex_unlock(&ldata->echo_lock);
+ ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0;
ldata->erasing = 0;
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
@@ -641,8 +637,7 @@ break_out:
* are prioritized. Also, when control characters are echoed with a
* prefixed "^", the pair is treated atomically and thus not separated.
*
- * Locking: output_lock to protect column state and space left,
- * echo_lock to protect the echo buffer
+ * Locking: output_lock to protect column state and space left
*/
static void process_echoes(struct tty_struct *tty)
@@ -652,16 +647,15 @@ static void process_echoes(struct tty_struct *tty)
size_t tail;
unsigned char c;
- if (ldata->echo_head == ldata->echo_tail)
+ if (ldata->echo_commit == ldata->echo_tail)
return;
mutex_lock(&ldata->output_lock);
- mutex_lock(&ldata->echo_lock);
space = tty_write_room(tty);
tail = ldata->echo_tail;
- nr = ldata->echo_head - ldata->echo_tail;
+ nr = ldata->echo_commit - ldata->echo_tail;
while (nr > 0) {
c = echo_buf(ldata, tail);
if (c == ECHO_OP_START) {
@@ -778,13 +772,21 @@ static void process_echoes(struct tty_struct *tty)
ldata->echo_tail = tail;
- mutex_unlock(&ldata->echo_lock);
mutex_unlock(&ldata->output_lock);
if (tty->ops->flush_chars)
tty->ops->flush_chars(tty);
}
+static void commit_echoes(struct tty_struct *tty)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+
+ smp_mb();
+ ldata->echo_commit = ldata->echo_head;
+ process_echoes(tty);
+}
+
/**
* add_echo_byte - add a byte to the echo buffer
* @c: unicode byte to echo
@@ -792,13 +794,16 @@ static void process_echoes(struct tty_struct *tty)
*
* Add a character or operation byte to the echo buffer.
*
- * Should be called under the echo lock to protect the echo buffer.
+ * Locks: may claim output_lock to prevent concurrent modify of
+ * echo_tail by process_echoes().
*/
static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
if (ldata->echo_head - ldata->echo_tail == N_TTY_BUF_SIZE) {
size_t head = ldata->echo_head;
+
+ mutex_lock(&ldata->output_lock);
/*
* Since the buffer start position needs to be advanced,
* be sure to step by a whole operation byte group.
@@ -810,6 +815,7 @@ static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
ldata->echo_tail += 2;
} else
ldata->echo_tail++;
+ mutex_unlock(&ldata->output_lock);
}
*echo_buf_addr(ldata, ldata->echo_head++) = c;
@@ -820,16 +826,12 @@ static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
* @ldata: n_tty data
*
* Add an operation to the echo buffer to move back one column.
- *
- * Locking: echo_lock to protect the echo buffer
*/
static void echo_move_back_col(struct n_tty_data *ldata)
{
- mutex_lock(&ldata->echo_lock);
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata);
- mutex_unlock(&ldata->echo_lock);
}
/**
@@ -838,16 +840,12 @@ static void echo_move_back_col(struct n_tty_data *ldata)
*
* Add an operation to the echo buffer to set the canon column
* to the current column.
- *
- * Locking: echo_lock to protect the echo buffer
*/
static void echo_set_canon_col(struct n_tty_data *ldata)
{
- mutex_lock(&ldata->echo_lock);
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(ECHO_OP_SET_CANON_COL, ldata);
- mutex_unlock(&ldata->echo_lock);
}
/**
@@ -863,15 +861,11 @@ static void echo_set_canon_col(struct n_tty_data *ldata)
* of input. This information will be used later, along with
* canon column (if applicable), to go back the correct number
* of columns.
- *
- * Locking: echo_lock to protect the echo buffer
*/
static void echo_erase_tab(unsigned int num_chars, int after_tab,
struct n_tty_data *ldata)
{
- mutex_lock(&ldata->echo_lock);
-
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(ECHO_OP_ERASE_TAB, ldata);
@@ -883,8 +877,6 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
num_chars |= 0x80;
add_echo_byte(num_chars, ldata);
-
- mutex_unlock(&ldata->echo_lock);
}
/**
@@ -896,20 +888,16 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
* L_ECHO(tty) is true. Called from the driver receive_buf path.
*
* This variant does not treat control characters specially.
- *
- * Locking: echo_lock to protect the echo buffer
*/
static void echo_char_raw(unsigned char c, struct n_tty_data *ldata)
{
- mutex_lock(&ldata->echo_lock);
if (c == ECHO_OP_START) {
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(ECHO_OP_START, ldata);
} else {
add_echo_byte(c, ldata);
}
- mutex_unlock(&ldata->echo_lock);
}
/**
@@ -922,16 +910,12 @@ static void echo_char_raw(unsigned char c, struct n_tty_data *ldata)
*
* This variant tags control characters to be echoed as "^X"
* (where X is the letter representing the control char).
- *
- * Locking: echo_lock to protect the echo buffer
*/
static void echo_char(unsigned char c, struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
- mutex_lock(&ldata->echo_lock);
-
if (c == ECHO_OP_START) {
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(ECHO_OP_START, ldata);
@@ -940,8 +924,6 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
add_echo_byte(ECHO_OP_START, ldata);
add_echo_byte(c, ldata);
}
-
- mutex_unlock(&ldata->echo_lock);
}
/**
@@ -1283,7 +1265,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (ldata->canon_head == ldata->read_head)
echo_set_canon_col(ldata);
echo_char(c, tty);
- process_echoes(tty);
+ commit_echoes(tty);
}
if (parmrk)
put_tty_queue(c, ldata);
@@ -1294,7 +1276,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (I_IXON(tty)) {
if (c == START_CHAR(tty)) {
start_tty(tty);
- process_echoes(tty);
+ commit_echoes(tty);
return;
}
if (c == STOP_CHAR(tty)) {
@@ -1325,7 +1307,7 @@ send_signal:
start_tty(tty);
if (L_ECHO(tty)) {
echo_char(c, tty);
- process_echoes(tty);
+ commit_echoes(tty);
}
isig(signal, tty);
return;
@@ -1344,7 +1326,7 @@ send_signal:
if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) ||
(c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
eraser(c, tty);
- process_echoes(tty);
+ commit_echoes(tty);
return;
}
if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
@@ -1354,7 +1336,7 @@ send_signal:
if (L_ECHOCTL(tty)) {
echo_char_raw('^', ldata);
echo_char_raw('\b', ldata);
- process_echoes(tty);
+ commit_echoes(tty);
}
}
return;
@@ -1370,7 +1352,7 @@ send_signal:
echo_char(read_buf(ldata, tail), tty);
tail++;
}
- process_echoes(tty);
+ commit_echoes(tty);
return;
}
if (c == '\n') {
@@ -1381,7 +1363,7 @@ send_signal:
}
if (L_ECHO(tty) || L_ECHONL(tty)) {
echo_char_raw('\n', ldata);
- process_echoes(tty);
+ commit_echoes(tty);
}
goto handle_newline;
}
@@ -1410,7 +1392,7 @@ send_signal:
if (ldata->canon_head == ldata->read_head)
echo_set_canon_col(ldata);
echo_char(c, tty);
- process_echoes(tty);
+ commit_echoes(tty);
}
/*
* XXX does PARMRK doubling happen for
@@ -1447,7 +1429,7 @@ handle_newline:
echo_set_canon_col(ldata);
echo_char(c, tty);
}
- process_echoes(tty);
+ commit_echoes(tty);
}
if (parmrk)
@@ -1712,7 +1694,6 @@ static int n_tty_open(struct tty_struct *tty)
ldata->overrun_time = jiffies;
mutex_init(&ldata->atomic_read_lock);
mutex_init(&ldata->output_lock);
- mutex_init(&ldata->echo_lock);
/* These are ugly. Currently a malloc failure here can panic */
ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 5/9] n_tty: Eliminate echo_commit memory barrier
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
` (3 preceding siblings ...)
2013-06-15 14:04 ` [PATCH v2 4/9] n_tty: Remove echo_lock Peter Hurley
@ 2013-06-15 14:04 ` Peter Hurley
2013-06-15 14:04 ` [PATCH v2 6/9] n_tty: Process echoes in blocks Peter Hurley
` (5 subsequent siblings)
10 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Use output_lock mutex as a memory barrier when storing echo_commit.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 31 ++++++++++++++++++++-----------
1 file changed, 20 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d22c14c..c595264 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -637,21 +637,16 @@ break_out:
* are prioritized. Also, when control characters are echoed with a
* prefixed "^", the pair is treated atomically and thus not separated.
*
- * Locking: output_lock to protect column state and space left
+ * Locking: callers must hold output_lock
*/
-static void process_echoes(struct tty_struct *tty)
+static void __process_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
int space, nr;
size_t tail;
unsigned char c;
- if (ldata->echo_commit == ldata->echo_tail)
- return;
-
- mutex_lock(&ldata->output_lock);
-
space = tty_write_room(tty);
tail = ldata->echo_tail;
@@ -771,20 +766,34 @@ static void process_echoes(struct tty_struct *tty)
}
ldata->echo_tail = tail;
+}
+
+static void commit_echoes(struct tty_struct *tty)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ mutex_lock(&ldata->output_lock);
+ ldata->echo_commit = ldata->echo_head;
+ __process_echoes(tty);
mutex_unlock(&ldata->output_lock);
if (tty->ops->flush_chars)
tty->ops->flush_chars(tty);
}
-static void commit_echoes(struct tty_struct *tty)
+static void process_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
- smp_mb();
- ldata->echo_commit = ldata->echo_head;
- process_echoes(tty);
+ if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_tail)
+ return;
+
+ mutex_lock(&ldata->output_lock);
+ __process_echoes(tty);
+ mutex_unlock(&ldata->output_lock);
+
+ if (tty->ops->flush_chars)
+ tty->ops->flush_chars(tty);
}
/**
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 6/9] n_tty: Process echoes in blocks
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
` (4 preceding siblings ...)
2013-06-15 14:04 ` [PATCH v2 5/9] n_tty: Eliminate echo_commit memory barrier Peter Hurley
@ 2013-06-15 14:04 ` Peter Hurley
2013-07-23 23:53 ` Greg Kroah-Hartman
2013-06-15 14:04 ` [PATCH v2 7/9] n_tty: Only flush echo output if actually output Peter Hurley
` (4 subsequent siblings)
10 siblings, 1 reply; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Byte-by-byte echo output is painfully slow, requiring a lock/unlock
cycle for every input byte.
Instead, perform the echo output in blocks of 256 characters, and
at least once per flip buffer receive. Enough space is reserved in
the echo buffer to guarantee a full block can be saved without
overrunning the echo output. Overrun is prevented by discarding
the oldest echoes until enough space exists in the echo buffer
to receive at least a full block of new echoes.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 70 +++++++++++++++++++++++++++++++++++------------------
1 file changed, 47 insertions(+), 23 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index c595264..f298890 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -74,6 +74,11 @@
#define ECHO_OP_SET_CANON_COL 0x81
#define ECHO_OP_ERASE_TAB 0x82
+#define ECHO_COMMIT_WATERMARK 256
+#define ECHO_BLOCK 256
+#define ECHO_DISCARD_WATERMARK N_TTY_BUF_SIZE - (ECHO_BLOCK + 32)
+
+
#undef N_TTY_TRACE
#ifdef N_TTY_TRACE
# define n_tty_trace(f, args...) trace_printk(f, ##args)
@@ -765,15 +770,40 @@ static void __process_echoes(struct tty_struct *tty)
}
}
+ /* If the echo buffer is nearly full (so that the possibility exists
+ * of echo overrun before the next commit), then discard enough
+ * data at the tail to prevent a subsequent overrun */
+ while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) {
+ if (echo_buf(ldata, tail == ECHO_OP_START)) {
+ if (echo_buf(ldata, tail) == ECHO_OP_ERASE_TAB)
+ tail += 3;
+ else
+ tail += 2;
+ } else
+ tail++;
+ }
+
ldata->echo_tail = tail;
}
static void commit_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
+ size_t nr, old;
+ size_t head;
+
+ head = ldata->echo_head;
+ old = ldata->echo_commit - ldata->echo_tail;
+
+ /* Process committed echoes if the accumulated # of bytes
+ * is over the threshold (and try again each time another
+ * block is accumulated) */
+ nr = head - ldata->echo_tail;
+ if (nr < ECHO_COMMIT_WATERMARK || (nr % ECHO_BLOCK > old % ECHO_BLOCK))
+ return;
mutex_lock(&ldata->output_lock);
- ldata->echo_commit = ldata->echo_head;
+ ldata->echo_commit = head;
__process_echoes(tty);
mutex_unlock(&ldata->output_lock);
@@ -796,37 +826,29 @@ static void process_echoes(struct tty_struct *tty)
tty->ops->flush_chars(tty);
}
+static void flush_echoes(struct tty_struct *tty)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+
+ if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_head)
+ return;
+
+ mutex_lock(&ldata->output_lock);
+ ldata->echo_commit = ldata->echo_head;
+ __process_echoes(tty);
+ mutex_unlock(&ldata->output_lock);
+}
+
/**
* add_echo_byte - add a byte to the echo buffer
* @c: unicode byte to echo
* @ldata: n_tty data
*
* Add a character or operation byte to the echo buffer.
- *
- * Locks: may claim output_lock to prevent concurrent modify of
- * echo_tail by process_echoes().
*/
-static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
+static inline void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
- if (ldata->echo_head - ldata->echo_tail == N_TTY_BUF_SIZE) {
- size_t head = ldata->echo_head;
-
- mutex_lock(&ldata->output_lock);
- /*
- * Since the buffer start position needs to be advanced,
- * be sure to step by a whole operation byte group.
- */
- if (echo_buf(ldata, head) == ECHO_OP_START) {
- if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB)
- ldata->echo_tail += 3;
- else
- ldata->echo_tail += 2;
- } else
- ldata->echo_tail++;
- mutex_unlock(&ldata->output_lock);
- }
-
*echo_buf_addr(ldata, ldata->echo_head++) = c;
}
@@ -1514,6 +1536,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
break;
}
}
+
+ flush_echoes(tty);
if (tty->ops->flush_chars)
tty->ops->flush_chars(tty);
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* Re: [PATCH v2 6/9] n_tty: Process echoes in blocks
2013-06-15 14:04 ` [PATCH v2 6/9] n_tty: Process echoes in blocks Peter Hurley
@ 2013-07-23 23:53 ` Greg Kroah-Hartman
2013-07-25 1:33 ` Peter Hurley
0 siblings, 1 reply; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-07-23 23:53 UTC (permalink / raw)
To: Peter Hurley; +Cc: linux-kernel, linux-serial, Jiri Slaby
On Sat, Jun 15, 2013 at 10:04:26AM -0400, Peter Hurley wrote:
> Byte-by-byte echo output is painfully slow, requiring a lock/unlock
> cycle for every input byte.
>
> Instead, perform the echo output in blocks of 256 characters, and
> at least once per flip buffer receive. Enough space is reserved in
> the echo buffer to guarantee a full block can be saved without
> overrunning the echo output. Overrun is prevented by discarding
> the oldest echoes until enough space exists in the echo buffer
> to receive at least a full block of new echoes.
I'm a bit worried about this, I wonder if anything is expecting the
echos to not come in "bursts" like this, but I really can't think of why
they would want that.
So let's apply it and see what breaks! :)
thanks,
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread
* Re: [PATCH v2 6/9] n_tty: Process echoes in blocks
2013-07-23 23:53 ` Greg Kroah-Hartman
@ 2013-07-25 1:33 ` Peter Hurley
0 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-25 1:33 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby
On 07/23/2013 07:53 PM, Greg Kroah-Hartman wrote:
> On Sat, Jun 15, 2013 at 10:04:26AM -0400, Peter Hurley wrote:
>> Byte-by-byte echo output is painfully slow, requiring a lock/unlock
>> cycle for every input byte.
>>
>> Instead, perform the echo output in blocks of 256 characters, and
>> at least once per flip buffer receive. Enough space is reserved in
>> the echo buffer to guarantee a full block can be saved without
>> overrunning the echo output. Overrun is prevented by discarding
>> the oldest echoes until enough space exists in the echo buffer
>> to receive at least a full block of new echoes.
>
> I'm a bit worried about this, I wonder if anything is expecting the
> echos to not come in "bursts" like this, but I really can't think of why
> they would want that.
The block size for echoes is trivially settable so if you'd prefer a
smaller value than every 256 chars, I could send a patch for a value
you are more comfortable with - 64 chars, 32 chars, whatever.
I picked that value from casual performance testing and that it
coincides with the smallest possible flip buffer; ie., echo blocks are
retired at the same rate as flip buffers when receiving is not
saturated.
> So let's apply it and see what breaks! :)
I'm ready :)
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 238+ messages in thread
* [PATCH v2 7/9] n_tty: Only flush echo output if actually output
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
` (5 preceding siblings ...)
2013-06-15 14:04 ` [PATCH v2 6/9] n_tty: Process echoes in blocks Peter Hurley
@ 2013-06-15 14:04 ` Peter Hurley
2013-06-15 14:04 ` [PATCH v2 8/9] n_tty: Eliminate counter in __process_echoes Peter Hurley
` (3 subsequent siblings)
10 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Don't have the driver flush received echoes if no echoes were
actually output.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f298890..4a2da9e 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -645,14 +645,14 @@ break_out:
* Locking: callers must hold output_lock
*/
-static void __process_echoes(struct tty_struct *tty)
+static size_t __process_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
- int space, nr;
+ int space, old_space;
size_t tail;
unsigned char c;
- space = tty_write_room(tty);
+ old_space = space = tty_write_room(tty);
tail = ldata->echo_tail;
nr = ldata->echo_commit - ldata->echo_tail;
@@ -784,12 +784,13 @@ static void __process_echoes(struct tty_struct *tty)
}
ldata->echo_tail = tail;
+ return old_space - space;
}
static void commit_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
- size_t nr, old;
+ size_t nr, old, echoed;
size_t head;
head = ldata->echo_head;
@@ -804,25 +805,26 @@ static void commit_echoes(struct tty_struct *tty)
mutex_lock(&ldata->output_lock);
ldata->echo_commit = head;
- __process_echoes(tty);
+ echoed = __process_echoes(tty);
mutex_unlock(&ldata->output_lock);
- if (tty->ops->flush_chars)
+ if (echoed && tty->ops->flush_chars)
tty->ops->flush_chars(tty);
}
static void process_echoes(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
+ size_t echoed;
if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_tail)
return;
mutex_lock(&ldata->output_lock);
- __process_echoes(tty);
+ echoed = __process_echoes(tty);
mutex_unlock(&ldata->output_lock);
- if (tty->ops->flush_chars)
+ if (echoed && tty->ops->flush_chars)
tty->ops->flush_chars(tty);
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 8/9] n_tty: Eliminate counter in __process_echoes
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
` (6 preceding siblings ...)
2013-06-15 14:04 ` [PATCH v2 7/9] n_tty: Only flush echo output if actually output Peter Hurley
@ 2013-06-15 14:04 ` Peter Hurley
2013-06-15 14:04 ` [PATCH v2 9/9] n_tty: Avoid false-sharing echo buffer indices Peter Hurley
` (2 subsequent siblings)
10 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Since neither echo_commit nor echo_tail can change for the duration
of __process_echoes loop, substitute index comparison for the
snapshot counter.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 4a2da9e..e689026 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -655,8 +655,7 @@ static size_t __process_echoes(struct tty_struct *tty)
old_space = space = tty_write_room(tty);
tail = ldata->echo_tail;
- nr = ldata->echo_commit - ldata->echo_tail;
- while (nr > 0) {
+ while (ldata->echo_commit != tail) {
c = echo_buf(ldata, tail);
if (c == ECHO_OP_START) {
unsigned char op;
@@ -700,20 +699,17 @@ static size_t __process_echoes(struct tty_struct *tty)
ldata->column--;
}
tail += 3;
- nr -= 3;
break;
case ECHO_OP_SET_CANON_COL:
ldata->canon_column = ldata->column;
tail += 2;
- nr -= 2;
break;
case ECHO_OP_MOVE_BACK_COL:
if (ldata->column > 0)
ldata->column--;
tail += 2;
- nr -= 2;
break;
case ECHO_OP_START:
@@ -726,7 +722,6 @@ static size_t __process_echoes(struct tty_struct *tty)
ldata->column++;
space--;
tail += 2;
- nr -= 2;
break;
default:
@@ -748,7 +743,6 @@ static size_t __process_echoes(struct tty_struct *tty)
ldata->column += 2;
space -= 2;
tail += 2;
- nr -= 2;
}
if (no_space_left)
@@ -766,7 +760,6 @@ static size_t __process_echoes(struct tty_struct *tty)
space -= 1;
}
tail += 1;
- nr -= 1;
}
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 9/9] n_tty: Avoid false-sharing echo buffer indices
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
` (7 preceding siblings ...)
2013-06-15 14:04 ` [PATCH v2 8/9] n_tty: Eliminate counter in __process_echoes Peter Hurley
@ 2013-06-15 14:04 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
2013-07-24 0:04 ` [PATCH v2 0/9] mostly lockless tty echo Greg Kroah-Hartman
10 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:04 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Separate the head & commit indices from the tail index to avoid
cache-line contention (so called 'false-sharing') between concurrent
threads.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index e689026..b9ccb49 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -90,6 +90,8 @@ struct n_tty_data {
/* producer-published */
size_t read_head;
size_t canon_head;
+ size_t echo_head;
+ size_t echo_commit;
DECLARE_BITMAP(process_char_map, 256);
/* private to n_tty_receive_overrun (single-threaded) */
@@ -105,20 +107,17 @@ struct n_tty_data {
/* shared by producer and consumer */
char *read_buf;
DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
+ unsigned char *echo_buf;
int minimum_to_wake;
/* consumer-published */
size_t read_tail;
- unsigned char *echo_buf;
- size_t echo_head;
- size_t echo_tail;
- size_t echo_commit;
-
/* protected by output lock */
unsigned int column;
unsigned int canon_column;
+ size_t echo_tail;
struct mutex atomic_read_lock;
struct mutex output_lock;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 00/20] tty: streamline per-char receiving
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
` (8 preceding siblings ...)
2013-06-15 14:04 ` [PATCH v2 9/9] n_tty: Avoid false-sharing echo buffer indices Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 01/20] n_tty: Fix EOF push handling Peter Hurley
` (19 more replies)
2013-07-24 0:04 ` [PATCH v2 0/9] mostly lockless tty echo Greg Kroah-Hartman
10 siblings, 20 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
** v2 changes **
- Rebase on v2 of 'mostly lockless tty echo'
This 4th of 4 patchsets implements efficient per-char receiving
in the N_TTY line discipline. As mentioned in the initial patchset,
'lockless n_tty receive path', casual performance measurements show
a 9~15x speedup in end-to-end copying.
Most of this patchset factors out modal conditions from the per-char
i/o path. For example, regardless of if ISTRIP is set or not, the modal
condition, I_ISTRIP(tty), was tested on every char received, despite
that ISTRIP can only be set by termios changes.
The modes handled by separate code paths are:
1) 'real raw' mode (which was already handled separately)
2) raw mode
3) EXTPROC when ISTRIP and IUCLC are not selected
4) tty closing mode
5) LNEXT mode
6) ISTRIP or IUCLC or IPARMRK set
7) everything else
The code duplication is kept to a minimum by carefully factoring out
shared slow paths (such as specially handled chars in canonical mode
or receiving PARITY or OVERRUN flags); only the per-char loops themselves
are duplicated.
Peter Hurley (20):
n_tty: Fix EOF push handling
n_tty: Remove alias ptrs in __receive_buf()
n_tty: Move buffers into n_tty_data
n_tty: Rename process_char_map to char_map
n_tty: Simplify __receive_buf loop count
n_tty: Factor 'real raw' receive_buf into standalone fn
n_tty: Factor signal char handling into separate fn
n_tty: Factor flagged char handling into separate fn
n_tty: Factor raw mode receive_buf() into separate fn
n_tty: Special case EXTPROC receive_buf() as raw mode
n_tty: Factor tty->closing receive_buf() into separate fn
n_tty: Factor standard per-char i/o into separate fn
n_tty: Eliminate char tests from IXANY restart test
n_tty: Split n_tty_receive_char()
n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn
n_tty: Factor PARMRK from normal per-char i/o
n_tty: Remove overflow tests from receive_buf() path
n_tty: Un-inline single-use functions
n_tty: Factor LNEXT processing from per-char i/o path
tty: Remove extra wakeup from pty write() path
drivers/tty/n_tty.c | 617 +++++++++++++++++++++++++++++++--------------------
drivers/tty/pty.c | 4 +-
drivers/tty/tty_io.c | 1 -
include/linux/tty.h | 1 -
4 files changed, 381 insertions(+), 242 deletions(-)
--
1.8.1.2
^ permalink raw reply [flat|nested] 238+ messages in thread* [PATCH v2 01/20] n_tty: Fix EOF push handling
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 02/20] n_tty: Remove alias ptrs in __receive_buf() Peter Hurley
` (18 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
In canonical mode, an EOF which is not the first character of the line
causes read() to complete and return the number of characters read so
far (commonly referred to as EOF push). However, if the previous read()
returned because the user buffer was full _and_ the next character
is an EOF not at the beginning of the line, read() must not return 0,
thus mistakenly indicating the end-of-file condition.
The TTY_PUSH flag is used to indicate an EOF was received which is not
at the beginning of the line. Because the EOF push condition is
evaluated by a thread other than the read(), multiple EOF pushes can
cause a premature end-of-file to be indicated.
Instead, discover the 'EOF push as first read character' condition
from the read() thread itself, and restart the i/o loop if detected.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 34 +++++++++++++++++-----------------
drivers/tty/tty_io.c | 1 -
include/linux/tty.h | 1 -
3 files changed, 17 insertions(+), 19 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index b9ccb49..55e4e38 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -113,6 +113,7 @@ struct n_tty_data {
/* consumer-published */
size_t read_tail;
+ size_t line_start;
/* protected by output lock */
unsigned int column;
@@ -336,6 +337,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
{
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0;
+ ldata->line_start = 0;
ldata->erasing = 0;
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
@@ -1395,8 +1397,6 @@ send_signal:
if (c == EOF_CHAR(tty)) {
if (read_cnt(ldata) >= N_TTY_BUF_SIZE)
return;
- if (ldata->canon_head != ldata->read_head)
- set_bit(TTY_PUSH, &tty->flags);
c = __DISABLED_CHAR;
goto handle_newline;
}
@@ -1603,6 +1603,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
if (canon_change) {
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
+ ldata->line_start = 0;
ldata->canon_head = ldata->read_tail;
ldata->erasing = 0;
ldata->lnext = 0;
@@ -1836,6 +1837,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
size_t eol;
size_t tail;
int ret, found = 0;
+ bool eof_push = 0;
/* N.B. avoid overrun if nr == 0 */
n = min(*nr, read_cnt(ldata));
@@ -1862,8 +1864,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
n = (found + eol + size) & (N_TTY_BUF_SIZE - 1);
c = n;
- if (found && read_buf(ldata, eol) == __DISABLED_CHAR)
+ if (found && read_buf(ldata, eol) == __DISABLED_CHAR) {
n--;
+ eof_push = !n && ldata->read_tail != ldata->line_start;
+ }
n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu size:%zu more:%zu\n",
__func__, eol, found, n, c, size, more);
@@ -1886,9 +1890,11 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
smp_mb__after_clear_bit();
ldata->read_tail += c;
- if (found)
+ if (found) {
+ ldata->line_start = ldata->read_tail;
tty_audit_push(tty);
- return 0;
+ }
+ return eof_push ? -EAGAIN : 0;
}
extern ssize_t redirected_tty_write(struct file *, const char __user *,
@@ -1963,12 +1969,10 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
int c;
int minimum, time;
ssize_t retval = 0;
- ssize_t size;
long timeout;
unsigned long flags;
int packet;
-do_it_again:
c = job_control(tty, file);
if (c < 0)
return c;
@@ -2075,7 +2079,10 @@ do_it_again:
if (ldata->icanon && !L_EXTPROC(tty)) {
retval = canon_copy_from_read_buf(tty, &b, &nr);
- if (retval)
+ if (retval == -EAGAIN) {
+ retval = 0;
+ continue;
+ } else if (retval)
break;
} else {
int uncopied;
@@ -2103,15 +2110,8 @@ do_it_again:
ldata->minimum_to_wake = minimum;
__set_current_state(TASK_RUNNING);
- size = b - buf;
- if (size) {
- retval = size;
- if (nr)
- clear_bit(TTY_PUSH, &tty->flags);
- } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) {
- up_read(&tty->termios_rwsem);
- goto do_it_again;
- }
+ if (b - buf)
+ retval = b - buf;
n_tty_set_room(tty);
up_read(&tty->termios_rwsem);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 7dbea58..b83c5c5 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -664,7 +664,6 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session)
spin_lock_irq(&tty->ctrl_lock);
clear_bit(TTY_THROTTLED, &tty->flags);
- clear_bit(TTY_PUSH, &tty->flags);
clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
put_pid(tty->session);
put_pid(tty->pgrp);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 5fd5d6f..554b732 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -304,7 +304,6 @@ struct tty_file_private {
#define TTY_EXCLUSIVE 3 /* Exclusive open mode */
#define TTY_DEBUG 4 /* Debugging */
#define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */
-#define TTY_PUSH 6 /* n_tty private */
#define TTY_CLOSING 7 /* ->close() in progress */
#define TTY_LDISC_OPEN 11 /* Line discipline is open */
#define TTY_PTY_LOCK 16 /* pty private */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 02/20] n_tty: Remove alias ptrs in __receive_buf()
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
2013-06-15 14:21 ` [PATCH v2 01/20] n_tty: Fix EOF push handling Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 03/20] n_tty: Move buffers into n_tty_data Peter Hurley
` (17 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
The char and flag buffer local alias pointers, p and f, are
unnecessary; remove them.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 55e4e38..b8851b6 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1484,8 +1484,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
struct n_tty_data *ldata = tty->disc_data;
- const unsigned char *p;
- char *f, flags = TTY_NORMAL;
+ char flags = TTY_NORMAL;
char buf[64];
if (ldata->real_raw) {
@@ -1507,19 +1506,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
} else {
int i;
- for (i = count, p = cp, f = fp; i; i--, p++) {
- if (f)
- flags = *f++;
+ for (i = count; i; i--, cp++) {
+ if (fp)
+ flags = *fp++;
switch (flags) {
case TTY_NORMAL:
- n_tty_receive_char(tty, *p);
+ n_tty_receive_char(tty, *cp);
break;
case TTY_BREAK:
n_tty_receive_break(tty);
break;
case TTY_PARITY:
case TTY_FRAME:
- n_tty_receive_parity_error(tty, *p);
+ n_tty_receive_parity_error(tty, *cp);
break;
case TTY_OVERRUN:
n_tty_receive_overrun(tty);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 03/20] n_tty: Move buffers into n_tty_data
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
2013-06-15 14:21 ` [PATCH v2 01/20] n_tty: Fix EOF push handling Peter Hurley
2013-06-15 14:21 ` [PATCH v2 02/20] n_tty: Remove alias ptrs in __receive_buf() Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 04/20] n_tty: Rename process_char_map to char_map Peter Hurley
` (16 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Reduce pointer reloading and improve locality-of-reference;
allocate read_buf and echo_buf within struct n_tty_data.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 25 +++++++++----------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index b8851b6..3daf9f0 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -105,9 +105,9 @@ struct n_tty_data {
unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
/* shared by producer and consumer */
- char *read_buf;
+ char read_buf[N_TTY_BUF_SIZE];
DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
- unsigned char *echo_buf;
+ unsigned char echo_buf[N_TTY_BUF_SIZE];
int minimum_to_wake;
@@ -1694,9 +1694,7 @@ static void n_tty_close(struct tty_struct *tty)
if (tty->link)
n_tty_packet_mode_flush(tty);
- kfree(ldata->read_buf);
- kfree(ldata->echo_buf);
- kfree(ldata);
+ vfree(ldata);
tty->disc_data = NULL;
}
@@ -1714,7 +1712,8 @@ static int n_tty_open(struct tty_struct *tty)
{
struct n_tty_data *ldata;
- ldata = kzalloc(sizeof(*ldata), GFP_KERNEL);
+ /* Currently a malloc failure here can panic */
+ ldata = vmalloc(sizeof(*ldata));
if (!ldata)
goto err;
@@ -1722,16 +1721,14 @@ static int n_tty_open(struct tty_struct *tty)
mutex_init(&ldata->atomic_read_lock);
mutex_init(&ldata->output_lock);
- /* These are ugly. Currently a malloc failure here can panic */
- ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
- ldata->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
- if (!ldata->read_buf || !ldata->echo_buf)
- goto err_free_bufs;
-
tty->disc_data = ldata;
reset_buffer_flags(tty->disc_data);
ldata->column = 0;
+ ldata->canon_column = 0;
ldata->minimum_to_wake = 1;
+ ldata->num_overrun = 0;
+ ldata->no_room = 0;
+ ldata->lnext = 0;
tty->closing = 0;
/* indicate buffer work may resume */
clear_bit(TTY_LDISC_HALTED, &tty->flags);
@@ -1739,10 +1736,6 @@ static int n_tty_open(struct tty_struct *tty)
tty_unthrottle(tty);
return 0;
-err_free_bufs:
- kfree(ldata->read_buf);
- kfree(ldata->echo_buf);
- kfree(ldata);
err:
return -ENOMEM;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 04/20] n_tty: Rename process_char_map to char_map
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (2 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 03/20] n_tty: Move buffers into n_tty_data Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 05/20] n_tty: Simplify __receive_buf loop count Peter Hurley
` (15 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 43 ++++++++++++++++++++-----------------------
1 file changed, 20 insertions(+), 23 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 3daf9f0..caf37d3 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -92,7 +92,7 @@ struct n_tty_data {
size_t canon_head;
size_t echo_head;
size_t echo_commit;
- DECLARE_BITMAP(process_char_map, 256);
+ DECLARE_BITMAP(char_map, 256);
/* private to n_tty_receive_overrun (single-threaded) */
unsigned long overrun_time;
@@ -1277,7 +1277,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
* handle specially, do shortcut processing to speed things
* up.
*/
- if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
+ if (!test_bit(c, ldata->char_map) || ldata->lnext) {
ldata->lnext = 0;
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
@@ -1617,41 +1617,38 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) ||
I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) ||
I_PARMRK(tty)) {
- bitmap_zero(ldata->process_char_map, 256);
+ bitmap_zero(ldata->char_map, 256);
if (I_IGNCR(tty) || I_ICRNL(tty))
- set_bit('\r', ldata->process_char_map);
+ set_bit('\r', ldata->char_map);
if (I_INLCR(tty))
- set_bit('\n', ldata->process_char_map);
+ set_bit('\n', ldata->char_map);
if (L_ICANON(tty)) {
- set_bit(ERASE_CHAR(tty), ldata->process_char_map);
- set_bit(KILL_CHAR(tty), ldata->process_char_map);
- set_bit(EOF_CHAR(tty), ldata->process_char_map);
- set_bit('\n', ldata->process_char_map);
- set_bit(EOL_CHAR(tty), ldata->process_char_map);
+ set_bit(ERASE_CHAR(tty), ldata->char_map);
+ set_bit(KILL_CHAR(tty), ldata->char_map);
+ set_bit(EOF_CHAR(tty), ldata->char_map);
+ set_bit('\n', ldata->char_map);
+ set_bit(EOL_CHAR(tty), ldata->char_map);
if (L_IEXTEN(tty)) {
- set_bit(WERASE_CHAR(tty),
- ldata->process_char_map);
- set_bit(LNEXT_CHAR(tty),
- ldata->process_char_map);
- set_bit(EOL2_CHAR(tty),
- ldata->process_char_map);
+ set_bit(WERASE_CHAR(tty), ldata->char_map);
+ set_bit(LNEXT_CHAR(tty), ldata->char_map);
+ set_bit(EOL2_CHAR(tty), ldata->char_map);
if (L_ECHO(tty))
set_bit(REPRINT_CHAR(tty),
- ldata->process_char_map);
+ ldata->char_map);
}
}
if (I_IXON(tty)) {
- set_bit(START_CHAR(tty), ldata->process_char_map);
- set_bit(STOP_CHAR(tty), ldata->process_char_map);
+ set_bit(START_CHAR(tty), ldata->char_map);
+ set_bit(STOP_CHAR(tty), ldata->char_map);
}
if (L_ISIG(tty)) {
- set_bit(INTR_CHAR(tty), ldata->process_char_map);
- set_bit(QUIT_CHAR(tty), ldata->process_char_map);
- set_bit(SUSP_CHAR(tty), ldata->process_char_map);
+ set_bit(INTR_CHAR(tty), ldata->char_map);
+ set_bit(QUIT_CHAR(tty), ldata->char_map);
+ set_bit(SUSP_CHAR(tty), ldata->char_map);
}
- clear_bit(__DISABLED_CHAR, ldata->process_char_map);
+ clear_bit(__DISABLED_CHAR, ldata->char_map);
ldata->raw = 0;
ldata->real_raw = 0;
} else {
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 05/20] n_tty: Simplify __receive_buf loop count
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (3 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 04/20] n_tty: Rename process_char_map to char_map Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 06/20] n_tty: Factor 'real raw' receive_buf into standalone fn Peter Hurley
` (14 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index caf37d3..f959dc9 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1504,21 +1504,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
memcpy(read_buf_addr(ldata, head), cp, n);
ldata->read_head += n;
} else {
- int i;
-
- for (i = count; i; i--, cp++) {
+ while (count--) {
if (fp)
flags = *fp++;
switch (flags) {
case TTY_NORMAL:
- n_tty_receive_char(tty, *cp);
+ n_tty_receive_char(tty, *cp++);
break;
case TTY_BREAK:
n_tty_receive_break(tty);
break;
case TTY_PARITY:
case TTY_FRAME:
- n_tty_receive_parity_error(tty, *cp);
+ n_tty_receive_parity_error(tty, *cp++);
break;
case TTY_OVERRUN:
n_tty_receive_overrun(tty);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 06/20] n_tty: Factor 'real raw' receive_buf into standalone fn
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (4 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 05/20] n_tty: Simplify __receive_buf loop count Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 07/20] n_tty: Factor signal char handling into separate fn Peter Hurley
` (13 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Convert to modal receive_buf() processing; factor real_raw
receive_buf() into n_tty_receive_buf_real_raw().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 51 ++++++++++++++++++++++++++++++---------------------
1 file changed, 30 insertions(+), 21 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f959dc9..309d964 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -242,7 +242,7 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
}
-static inline void n_tty_check_throttle(struct tty_struct *tty)
+static void n_tty_check_throttle(struct tty_struct *tty)
{
if (tty->driver->type == TTY_DRIVER_TYPE_PTY)
return;
@@ -1480,6 +1480,28 @@ handle_newline:
* publishes read_head and canon_head
*/
+static void
+n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ size_t n, head;
+
+ head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
+ n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
+ n = min_t(size_t, count, n);
+ memcpy(read_buf_addr(ldata, head), cp, n);
+ ldata->read_head += n;
+ cp += n;
+ count -= n;
+
+ head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
+ n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
+ n = min_t(size_t, count, n);
+ memcpy(read_buf_addr(ldata, head), cp, n);
+ ldata->read_head += n;
+}
+
static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
@@ -1487,23 +1509,9 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char flags = TTY_NORMAL;
char buf[64];
- if (ldata->real_raw) {
- size_t n, head;
-
- head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
- n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
- n = min_t(size_t, count, n);
- memcpy(read_buf_addr(ldata, head), cp, n);
- ldata->read_head += n;
- cp += n;
- count -= n;
-
- head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
- n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
- n = min_t(size_t, count, n);
- memcpy(read_buf_addr(ldata, head), cp, n);
- ldata->read_head += n;
- } else {
+ if (ldata->real_raw)
+ n_tty_receive_buf_real_raw(tty, cp, fp, count);
+ else {
while (count--) {
if (fp)
flags = *fp++;
@@ -1539,8 +1547,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
}
-
- n_tty_check_throttle(tty);
}
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
@@ -1548,6 +1554,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
{
down_read(&tty->termios_rwsem);
__receive_buf(tty, cp, fp, count);
+ n_tty_check_throttle(tty);
up_read(&tty->termios_rwsem);
}
@@ -1563,8 +1570,10 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
if (!room)
ldata->no_room = 1;
count = min(count, room);
- if (count)
+ if (count) {
__receive_buf(tty, cp, fp, count);
+ n_tty_check_throttle(tty);
+ }
up_read(&tty->termios_rwsem);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 07/20] n_tty: Factor signal char handling into separate fn
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (5 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 06/20] n_tty: Factor 'real raw' receive_buf into standalone fn Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 08/20] n_tty: Factor flagged " Peter Hurley
` (12 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Reduce the monolithic n_tty_receive_char() complexity; factor the
handling of INTR_CHAR, QUIT_CHAR and SUSP_CHAR into
n_tty_receive_signal_char().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 52 ++++++++++++++++++++++++++++------------------------
1 file changed, 28 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 309d964..be5ef56 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1218,6 +1218,26 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty,
wake_up_interruptible(&tty->read_wait);
}
+static void
+n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
+{
+ if (!L_NOFLSH(tty)) {
+ /* flushing needs exclusive termios_rwsem */
+ up_read(&tty->termios_rwsem);
+ n_tty_flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
+ down_read(&tty->termios_rwsem);
+ }
+ if (I_IXON(tty))
+ start_tty(tty);
+ if (L_ECHO(tty)) {
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ isig(signal, tty);
+ return;
+}
+
/**
* n_tty_receive_char - perform processing
* @tty: terminal device
@@ -1313,30 +1333,14 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
}
if (L_ISIG(tty)) {
- int signal;
- signal = SIGINT;
- if (c == INTR_CHAR(tty))
- goto send_signal;
- signal = SIGQUIT;
- if (c == QUIT_CHAR(tty))
- goto send_signal;
- signal = SIGTSTP;
- if (c == SUSP_CHAR(tty)) {
-send_signal:
- if (!L_NOFLSH(tty)) {
- /* flushing needs exclusive termios_rwsem */
- up_read(&tty->termios_rwsem);
- n_tty_flush_buffer(tty);
- tty_driver_flush_buffer(tty);
- down_read(&tty->termios_rwsem);
- }
- if (I_IXON(tty))
- start_tty(tty);
- if (L_ECHO(tty)) {
- echo_char(c, tty);
- commit_echoes(tty);
- }
- isig(signal, tty);
+ if (c == INTR_CHAR(tty)) {
+ n_tty_receive_signal_char(tty, SIGINT, c);
+ return;
+ } else if (c == QUIT_CHAR(tty)) {
+ n_tty_receive_signal_char(tty, SIGQUIT, c);
+ return;
+ } else if (c == SUSP_CHAR(tty)) {
+ n_tty_receive_signal_char(tty, SIGTSTP, c);
return;
}
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 08/20] n_tty: Factor flagged char handling into separate fn
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (6 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 07/20] n_tty: Factor signal char handling into separate fn Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 09/20] n_tty: Factor raw mode receive_buf() " Peter Hurley
` (11 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Prepare for modal receive_buf() handling; factor handling for
TTY_BREAK, TTY_PARITY, TTY_FRAME and TTY_OVERRUN into
n_tty_receive_char_flagged().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 50 +++++++++++++++++++++++++++++---------------------
1 file changed, 29 insertions(+), 21 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index be5ef56..b7c5ab3 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1467,6 +1467,29 @@ handle_newline:
put_tty_queue(c, ldata);
}
+static void
+n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag)
+{
+ char buf[64];
+
+ switch (flag) {
+ case TTY_BREAK:
+ n_tty_receive_break(tty);
+ break;
+ case TTY_PARITY:
+ case TTY_FRAME:
+ n_tty_receive_parity_error(tty, c);
+ break;
+ case TTY_OVERRUN:
+ n_tty_receive_overrun(tty);
+ break;
+ default:
+ printk(KERN_ERR "%s: unknown flag %d\n",
+ tty_name(tty, buf), flag);
+ break;
+ }
+}
+
/**
* n_tty_receive_buf - data receive
* @tty: terminal device
@@ -1510,34 +1533,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
struct n_tty_data *ldata = tty->disc_data;
- char flags = TTY_NORMAL;
- char buf[64];
if (ldata->real_raw)
n_tty_receive_buf_real_raw(tty, cp, fp, count);
else {
+ char flag = TTY_NORMAL;
+
while (count--) {
if (fp)
- flags = *fp++;
- switch (flags) {
- case TTY_NORMAL:
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL))
n_tty_receive_char(tty, *cp++);
- break;
- case TTY_BREAK:
- n_tty_receive_break(tty);
- break;
- case TTY_PARITY:
- case TTY_FRAME:
- n_tty_receive_parity_error(tty, *cp++);
- break;
- case TTY_OVERRUN:
- n_tty_receive_overrun(tty);
- break;
- default:
- printk(KERN_ERR "%s: unknown flag %d\n",
- tty_name(tty, buf), flags);
- break;
- }
+ else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
}
flush_echoes(tty);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 09/20] n_tty: Factor raw mode receive_buf() into separate fn
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (7 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 08/20] n_tty: Factor flagged " Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 10/20] n_tty: Special case EXTPROC receive_buf() as raw mode Peter Hurley
` (10 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Convert to modal receive_buf() processing; factor raw mode
per-char i/o into n_tty_receive_buf_raw().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index b7c5ab3..40cc0a5 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1258,11 +1258,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
struct n_tty_data *ldata = tty->disc_data;
int parmrk;
- if (ldata->raw) {
- put_tty_queue(c, ldata);
- return;
- }
-
if (I_ISTRIP(tty))
c &= 0x7f;
if (I_IUCLC(tty) && L_IEXTEN(tty))
@@ -1529,6 +1524,23 @@ n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp,
ldata->read_head += n;
}
+static void
+n_tty_receive_buf_raw(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ char flag = TTY_NORMAL;
+
+ while (count--) {
+ if (fp)
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL))
+ put_tty_queue(*cp++, ldata);
+ else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
+ }
+}
+
static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
@@ -1536,6 +1548,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
if (ldata->real_raw)
n_tty_receive_buf_real_raw(tty, cp, fp, count);
+ else if (ldata->raw)
+ n_tty_receive_buf_raw(tty, cp, fp, count);
else {
char flag = TTY_NORMAL;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 10/20] n_tty: Special case EXTPROC receive_buf() as raw mode
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (8 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 09/20] n_tty: Factor raw mode receive_buf() " Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 11/20] n_tty: Factor tty->closing receive_buf() into separate fn Peter Hurley
` (9 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
When EXTPROC is set without ISTRIP or IUCLC, processing is
identical to raw mode; handle this receiving mode as a special-case
of raw mode.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 40cc0a5..75af7f5 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1545,10 +1545,11 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
struct n_tty_data *ldata = tty->disc_data;
+ bool preops = I_ISTRIP(tty) || (I_IUCLC(tty) && L_IEXTEN(tty));
if (ldata->real_raw)
n_tty_receive_buf_real_raw(tty, cp, fp, count);
- else if (ldata->raw)
+ else if (ldata->raw || (L_EXTPROC(tty) && !preops))
n_tty_receive_buf_raw(tty, cp, fp, count);
else {
char flag = TTY_NORMAL;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 11/20] n_tty: Factor tty->closing receive_buf() into separate fn
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (9 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 10/20] n_tty: Special case EXTPROC receive_buf() as raw mode Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 12/20] n_tty: Factor standard per-char i/o " Peter Hurley
` (8 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Convert to modal receive_buf() processing; factor receive char
processing when tty->closing into n_tty_receive_buf_closing().
Note that EXTPROC when ISTRIP or IUCLC is set continues to be
handled by n_tty_receive_char().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 50 +++++++++++++++++++++++++++++++++++++++-----------
1 file changed, 39 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 75af7f5..099b02d 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1275,17 +1275,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
process_echoes(tty);
}
- if (tty->closing) {
- if (I_IXON(tty)) {
- if (c == START_CHAR(tty)) {
- start_tty(tty);
- process_echoes(tty);
- } else if (c == STOP_CHAR(tty))
- stop_tty(tty);
- }
- return;
- }
-
/*
* If the previous character was LNEXT, or we know that this
* character is not one of the characters that we'll have to
@@ -1462,6 +1451,27 @@ handle_newline:
put_tty_queue(c, ldata);
}
+static inline void
+n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
+{
+ if (I_ISTRIP(tty))
+ c &= 0x7f;
+ if (I_IUCLC(tty) && L_IEXTEN(tty))
+ c = tolower(c);
+
+ if (I_IXON(tty)) {
+ if (c == STOP_CHAR(tty))
+ stop_tty(tty);
+ else if (c == START_CHAR(tty) ||
+ (tty->stopped && !tty->flow_stopped && I_IXANY(tty) &&
+ c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) &&
+ c != SUSP_CHAR(tty))) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+ }
+}
+
static void
n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag)
{
@@ -1541,6 +1551,22 @@ n_tty_receive_buf_raw(struct tty_struct *tty, const unsigned char *cp,
}
}
+static void
+n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ char flag = TTY_NORMAL;
+
+ while (count--) {
+ if (fp)
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL))
+ n_tty_receive_char_closing(tty, *cp++);
+ else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
+ }
+}
+
static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
@@ -1551,6 +1577,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
n_tty_receive_buf_real_raw(tty, cp, fp, count);
else if (ldata->raw || (L_EXTPROC(tty) && !preops))
n_tty_receive_buf_raw(tty, cp, fp, count);
+ else if (tty->closing && !L_EXTPROC(tty))
+ n_tty_receive_buf_closing(tty, cp, fp, count);
else {
char flag = TTY_NORMAL;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 12/20] n_tty: Factor standard per-char i/o into separate fn
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (10 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 11/20] n_tty: Factor tty->closing receive_buf() into separate fn Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-07-24 0:12 ` Greg Kroah-Hartman
2013-06-15 14:21 ` [PATCH v2 13/20] n_tty: Eliminate char tests from IXANY restart test Peter Hurley
` (7 subsequent siblings)
19 siblings, 1 reply; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Simplify __receive_buf() into a dispatch function; perform per-char
processing for all other modes not already handled.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 099b02d..785def1 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1567,6 +1567,23 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
}
}
+static void
+n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ char flag = TTY_NORMAL;
+
+ while (count--) {
+ if (fp)
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL))
+ n_tty_receive_char(tty, *cp++);
+ else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
+ }
+}
+
static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
@@ -1580,16 +1597,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
- char flag = TTY_NORMAL;
-
- while (count--) {
- if (fp)
- flag = *fp++;
- if (likely(flag == TTY_NORMAL))
- n_tty_receive_char(tty, *cp++);
- else
- n_tty_receive_char_flagged(tty, *cp++, flag);
- }
+ n_tty_receive_buf_standard(tty, cp, fp, count);
flush_echoes(tty);
if (tty->ops->flush_chars)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* Re: [PATCH v2 12/20] n_tty: Factor standard per-char i/o into separate fn
2013-06-15 14:21 ` [PATCH v2 12/20] n_tty: Factor standard per-char i/o " Peter Hurley
@ 2013-07-24 0:12 ` Greg Kroah-Hartman
2013-07-24 0:49 ` Peter Hurley
2013-07-24 12:29 ` [PATCH v3 1/9] " Peter Hurley
0 siblings, 2 replies; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-07-24 0:12 UTC (permalink / raw)
To: Peter Hurley; +Cc: linux-kernel, linux-serial, Jiri Slaby
On Sat, Jun 15, 2013 at 10:21:28AM -0400, Peter Hurley wrote:
> Simplify __receive_buf() into a dispatch function; perform per-char
> processing for all other modes not already handled.
>
> Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
> ---
> drivers/tty/n_tty.c | 28 ++++++++++++++++++----------
> 1 file changed, 18 insertions(+), 10 deletions(-)
This patch causes the warning:
drivers/tty/n_tty.c: In function ‘n_tty_receive_buf_standard’:
drivers/tty/n_tty.c:1575:21: warning: unused variable ‘ldata’ [-Wunused-variable]
to happen.
Care to fix it up, and refresh the rest of the series (something fails
later on), and resend these so that I can apply them?
Everything before this was applied to my tree, you should have gotten
emails about them.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread
* Re: [PATCH v2 12/20] n_tty: Factor standard per-char i/o into separate fn
2013-07-24 0:12 ` Greg Kroah-Hartman
@ 2013-07-24 0:49 ` Peter Hurley
2013-07-24 12:29 ` [PATCH v3 1/9] " Peter Hurley
1 sibling, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-24 0:49 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby
On 07/23/2013 08:12 PM, Greg Kroah-Hartman wrote:
> On Sat, Jun 15, 2013 at 10:21:28AM -0400, Peter Hurley wrote:
>> Simplify __receive_buf() into a dispatch function; perform per-char
>> processing for all other modes not already handled.
>>
>> Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
>> ---
>> drivers/tty/n_tty.c | 28 ++++++++++++++++++----------
>> 1 file changed, 18 insertions(+), 10 deletions(-)
>
> This patch causes the warning:
> drivers/tty/n_tty.c: In function ‘n_tty_receive_buf_standard’:
> drivers/tty/n_tty.c:1575:21: warning: unused variable ‘ldata’ [-Wunused-variable]
> to happen.
>
> Care to fix it up, and refresh the rest of the series (something fails
> later on), and resend these so that I can apply them?
Sorry about that. Working on it right now.
I think these errors came out of a reordering rebase I did by hand
a while back. Obviously I need to add per-patch build testing to my
workflow. Time to get an SSD :)
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 238+ messages in thread
* [PATCH v3 1/9] n_tty: Factor standard per-char i/o into separate fn
2013-07-24 0:12 ` Greg Kroah-Hartman
2013-07-24 0:49 ` Peter Hurley
@ 2013-07-24 12:29 ` Peter Hurley
2013-07-24 12:29 ` [PATCH v3 2/9] n_tty: Eliminate char tests from IXANY restart test Peter Hurley
` (7 more replies)
1 sibling, 8 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-24 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Simplify __receive_buf() into a dispatch function; perform per-char
processing for all other modes not already handled.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 27 +++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index ed6c4e4..15d95e4 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1568,6 +1568,22 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
}
}
+static void
+n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ char flag = TTY_NORMAL;
+
+ while (count--) {
+ if (fp)
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL))
+ n_tty_receive_char(tty, *cp++);
+ else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
+ }
+}
+
static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
@@ -1581,16 +1597,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
- char flag = TTY_NORMAL;
-
- while (count--) {
- if (fp)
- flag = *fp++;
- if (likely(flag == TTY_NORMAL))
- n_tty_receive_char(tty, *cp++);
- else
- n_tty_receive_char_flagged(tty, *cp++, flag);
- }
+ n_tty_receive_buf_standard(tty, cp, fp, count);
flush_echoes(tty);
if (tty->ops->flush_chars)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 2/9] n_tty: Eliminate char tests from IXANY restart test
2013-07-24 12:29 ` [PATCH v3 1/9] " Peter Hurley
@ 2013-07-24 12:29 ` Peter Hurley
2013-07-24 12:29 ` [PATCH v3 3/9] n_tty: Split n_tty_receive_char() Peter Hurley
` (6 subsequent siblings)
7 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-24 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Relocate the IXANY restart tty test to code paths where the
the received char is not START_CHAR, STOP_CHAR, INTR_CHAR,
QUIT_CHAR or SUSP_CHAR.
Fixes the condition when ISIG if off and one of INTR_CHAR,
QUIT_CHAR or SUSP_CHAR does not restart i/o.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 15d95e4..d3b4129 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1269,13 +1269,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
return;
}
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) &&
- c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
-
/*
* If the previous character was LNEXT, or we know that this
* character is not one of the characters that we'll have to
@@ -1284,6 +1277,13 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
*/
if (!test_bit(c, ldata->char_map) || ldata->lnext) {
ldata->lnext = 0;
+
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
+ I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
@@ -1330,6 +1330,11 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
}
}
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
if (c == '\r') {
if (I_IGNCR(tty))
return;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 3/9] n_tty: Split n_tty_receive_char()
2013-07-24 12:29 ` [PATCH v3 1/9] " Peter Hurley
2013-07-24 12:29 ` [PATCH v3 2/9] n_tty: Eliminate char tests from IXANY restart test Peter Hurley
@ 2013-07-24 12:29 ` Peter Hurley
2013-07-24 12:29 ` [PATCH v3 4/9] n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn Peter Hurley
` (5 subsequent siblings)
7 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-24 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Factor 'special' per-char processing into standalone fn,
n_tty_receive_char_special(), which handles processing for chars
marked in the char_map.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 103 ++++++++++++++++++++++++++++------------------------
1 file changed, 56 insertions(+), 47 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d3b4129..140b555 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1254,57 +1254,12 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
* otherwise, publishes read_head via put_tty_queue()
*/
-static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+static void
+n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
int parmrk;
- if (I_ISTRIP(tty))
- c &= 0x7f;
- if (I_IUCLC(tty) && L_IEXTEN(tty))
- c = tolower(c);
-
- if (L_EXTPROC(tty)) {
- put_tty_queue(c, ldata);
- return;
- }
-
- /*
- * If the previous character was LNEXT, or we know that this
- * character is not one of the characters that we'll have to
- * handle specially, do shortcut processing to speed things
- * up.
- */
- if (!test_bit(c, ldata->char_map) || ldata->lnext) {
- ldata->lnext = 0;
-
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
-
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
- if (L_ECHO(tty)) {
- finish_erasing(ldata);
- /* Record the column of first canon char. */
- if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(ldata);
- echo_char(c, tty);
- commit_echoes(tty);
- }
- if (parmrk)
- put_tty_queue(c, ldata);
- put_tty_queue(c, ldata);
- return;
- }
-
if (I_IXON(tty)) {
if (c == START_CHAR(tty)) {
start_tty(tty);
@@ -1457,6 +1412,60 @@ handle_newline:
put_tty_queue(c, ldata);
}
+static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ int parmrk;
+
+ if (I_ISTRIP(tty))
+ c &= 0x7f;
+ if (I_IUCLC(tty) && L_IEXTEN(tty))
+ c = tolower(c);
+
+ if (L_EXTPROC(tty)) {
+ put_tty_queue(c, ldata);
+ return;
+ }
+
+ /*
+ * If the previous character was LNEXT, or we know that this
+ * character is not one of the characters that we'll have to
+ * handle specially, do shortcut processing to speed things
+ * up.
+ */
+ if (!test_bit(c, ldata->char_map) || ldata->lnext) {
+ ldata->lnext = 0;
+
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
+ I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
+ parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ /* beep if no space */
+ if (L_ECHO(tty))
+ process_output('\a', tty);
+ return;
+ }
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ if (parmrk)
+ put_tty_queue(c, ldata);
+ put_tty_queue(c, ldata);
+ return;
+ }
+
+ n_tty_receive_char_special(tty, c);
+}
+
static inline void
n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
{
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 4/9] n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn
2013-07-24 12:29 ` [PATCH v3 1/9] " Peter Hurley
2013-07-24 12:29 ` [PATCH v3 2/9] n_tty: Eliminate char tests from IXANY restart test Peter Hurley
2013-07-24 12:29 ` [PATCH v3 3/9] n_tty: Split n_tty_receive_char() Peter Hurley
@ 2013-07-24 12:29 ` Peter Hurley
2013-07-24 12:29 ` [PATCH v3 5/9] n_tty: Factor PARMRK from normal per-char i/o Peter Hurley
` (4 subsequent siblings)
7 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-24 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Convert to modal receive_buf processing; factor char receive
processing for unusual termios settings out of normal per-char
i/o path.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 44 ++++++++++++++++++++++++++++++++------------
1 file changed, 32 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 140b555..99bbee4 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1417,16 +1417,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
struct n_tty_data *ldata = tty->disc_data;
int parmrk;
- if (I_ISTRIP(tty))
- c &= 0x7f;
- if (I_IUCLC(tty) && L_IEXTEN(tty))
- c = tolower(c);
-
- if (L_EXTPROC(tty)) {
- put_tty_queue(c, ldata);
- return;
- }
-
/*
* If the previous character was LNEXT, or we know that this
* character is not one of the characters that we'll have to
@@ -1584,7 +1574,34 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
static void
n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp,
- char *fp, int count)
+ char *fp, int count)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ char flag = TTY_NORMAL;
+
+ while (count--) {
+ if (fp)
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL)) {
+ unsigned char c = *cp++;
+
+ if (I_ISTRIP(tty))
+ c &= 0x7f;
+ if (I_IUCLC(tty) && L_IEXTEN(tty))
+ c = tolower(c);
+ if (L_EXTPROC(tty)) {
+ put_tty_queue(c, ldata);
+ continue;
+ }
+ n_tty_receive_char(tty, c);
+ } else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
+ }
+}
+
+static void
+n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
{
char flag = TTY_NORMAL;
@@ -1611,7 +1628,10 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
- n_tty_receive_buf_standard(tty, cp, fp, count);
+ if (!preops)
+ n_tty_receive_buf_fast(tty, cp, fp, count);
+ else
+ n_tty_receive_buf_standard(tty, cp, fp, count);
flush_echoes(tty);
if (tty->ops->flush_chars)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 5/9] n_tty: Factor PARMRK from normal per-char i/o
2013-07-24 12:29 ` [PATCH v3 1/9] " Peter Hurley
` (2 preceding siblings ...)
2013-07-24 12:29 ` [PATCH v3 4/9] n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn Peter Hurley
@ 2013-07-24 12:29 ` Peter Hurley
2013-07-24 12:29 ` [PATCH v3 6/9] n_tty: Remove overflow tests from receive_buf() path Peter Hurley
` (3 subsequent siblings)
7 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-24 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Handle PARMRK processing on the slow per-char i/o path.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 45 +++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 99bbee4..aed1e94 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1457,6 +1457,47 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
}
static inline void
+n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+
+ /*
+ * If the previous character was LNEXT, or we know that this
+ * character is not one of the characters that we'll have to
+ * handle specially, do shortcut processing to speed things
+ * up.
+ */
+ if (!test_bit(c, ldata->char_map) || ldata->lnext) {
+ ldata->lnext = 0;
+
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
+ I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - 1)) {
+ /* beep if no space */
+ if (L_ECHO(tty))
+ process_output('\a', tty);
+ return;
+ }
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ put_tty_queue(c, ldata);
+ return;
+ }
+
+ n_tty_receive_char_special(tty, c);
+}
+
+static inline void
n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
{
if (I_ISTRIP(tty))
@@ -1609,7 +1650,7 @@ n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp,
if (fp)
flag = *fp++;
if (likely(flag == TTY_NORMAL))
- n_tty_receive_char(tty, *cp++);
+ n_tty_receive_char_fast(tty, *cp++);
else
n_tty_receive_char_flagged(tty, *cp++, flag);
}
@@ -1628,7 +1669,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
- if (!preops)
+ if (!preops && !I_PARMRK(tty))
n_tty_receive_buf_fast(tty, cp, fp, count);
else
n_tty_receive_buf_standard(tty, cp, fp, count);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 6/9] n_tty: Remove overflow tests from receive_buf() path
2013-07-24 12:29 ` [PATCH v3 1/9] " Peter Hurley
` (3 preceding siblings ...)
2013-07-24 12:29 ` [PATCH v3 5/9] n_tty: Factor PARMRK from normal per-char i/o Peter Hurley
@ 2013-07-24 12:29 ` Peter Hurley
2013-07-24 12:29 ` [PATCH v3 7/9] n_tty: Un-inline single-use functions Peter Hurley
` (2 subsequent siblings)
7 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-24 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Always pre-figure the space available in the read_buf and limit
the inbound receive request to that amount.
For compatibility reasons with the non-flow-controlled interface,
n_tty_receive_buf() will continue filling read_buf until all data
has been received or receive_room() returns 0.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 85 +++++++++++++++++++++++------------------------------
1 file changed, 37 insertions(+), 48 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index aed1e94..0f33e0c 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -315,12 +315,9 @@ static inline void n_tty_check_unthrottle(struct tty_struct *tty)
* not active.
*/
-static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
+static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
{
- if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
- *read_buf_addr(ldata, ldata->read_head) = c;
- ldata->read_head++;
- }
+ *read_buf_addr(ldata, ldata->read_head++) = c;
}
/**
@@ -1332,11 +1329,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
return;
}
if (c == '\n') {
- if (read_cnt(ldata) >= N_TTY_BUF_SIZE) {
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty) || L_ECHONL(tty)) {
echo_char_raw('\n', ldata);
commit_echoes(tty);
@@ -1344,8 +1336,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
goto handle_newline;
}
if (c == EOF_CHAR(tty)) {
- if (read_cnt(ldata) >= N_TTY_BUF_SIZE)
- return;
c = __DISABLED_CHAR;
goto handle_newline;
}
@@ -1353,11 +1343,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
(c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk)) {
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
/*
* XXX are EOL_CHAR and EOL2_CHAR echoed?!?
*/
@@ -1387,12 +1372,6 @@ handle_newline:
}
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty)) {
finish_erasing(ldata);
if (c == '\n')
@@ -1431,14 +1410,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
start_tty(tty);
process_echoes(tty);
}
-
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty)) {
finish_erasing(ldata);
/* Record the column of first canon char. */
@@ -1447,6 +1418,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
echo_char(c, tty);
commit_echoes(tty);
}
+ parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
if (parmrk)
put_tty_queue(c, ldata);
put_tty_queue(c, ldata);
@@ -1475,13 +1447,6 @@ n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c)
start_tty(tty);
process_echoes(tty);
}
-
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty)) {
finish_erasing(ldata);
/* Record the column of first canon char. */
@@ -1690,8 +1655,23 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ int room, n;
+
down_read(&tty->termios_rwsem);
- __receive_buf(tty, cp, fp, count);
+
+ while (1) {
+ room = receive_room(tty);
+ n = min(count, room);
+ if (!n)
+ break;
+ __receive_buf(tty, cp, fp, n);
+ cp += n;
+ if (fp)
+ fp += n;
+ count -= n;
+ }
+
+ tty->receive_room = room;
n_tty_check_throttle(tty);
up_read(&tty->termios_rwsem);
}
@@ -1700,22 +1680,31 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
struct n_tty_data *ldata = tty->disc_data;
- int room;
+ int room, n, rcvd = 0;
down_read(&tty->termios_rwsem);
- tty->receive_room = room = receive_room(tty);
- if (!room)
- ldata->no_room = 1;
- count = min(count, room);
- if (count) {
- __receive_buf(tty, cp, fp, count);
- n_tty_check_throttle(tty);
+ while (1) {
+ room = receive_room(tty);
+ n = min(count, room);
+ if (!n) {
+ if (!room)
+ ldata->no_room = 1;
+ break;
+ }
+ __receive_buf(tty, cp, fp, n);
+ cp += n;
+ if (fp)
+ fp += n;
+ count -= n;
+ rcvd += n;
}
+ tty->receive_room = room;
+ n_tty_check_throttle(tty);
up_read(&tty->termios_rwsem);
- return count;
+ return rcvd;
}
int is_ignored(int sig)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 7/9] n_tty: Un-inline single-use functions
2013-07-24 12:29 ` [PATCH v3 1/9] " Peter Hurley
` (4 preceding siblings ...)
2013-07-24 12:29 ` [PATCH v3 6/9] n_tty: Remove overflow tests from receive_buf() path Peter Hurley
@ 2013-07-24 12:29 ` Peter Hurley
2013-07-24 12:29 ` [PATCH v3 8/9] n_tty: Factor LNEXT processing from per-char i/o path Peter Hurley
2013-07-24 12:29 ` [PATCH v3 9/9] tty: Remove extra wakeup from pty write() path Peter Hurley
7 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-24 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
gcc will likely inline these single-use functions anyway; remove
inline modifier.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0f33e0c..f516247 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -263,7 +263,7 @@ static void n_tty_check_throttle(struct tty_struct *tty)
__tty_set_flow_change(tty, 0);
}
-static inline void n_tty_check_unthrottle(struct tty_struct *tty)
+static void n_tty_check_unthrottle(struct tty_struct *tty)
{
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->link->ldisc->ops->write_wakeup == n_tty_write_wakeup) {
@@ -1109,7 +1109,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
* Locking: ctrl_lock
*/
-static inline void isig(int sig, struct tty_struct *tty)
+static void isig(int sig, struct tty_struct *tty)
{
struct pid *tty_pgrp = tty_get_pgrp(tty);
if (tty_pgrp) {
@@ -1132,7 +1132,7 @@ static inline void isig(int sig, struct tty_struct *tty)
* Note: may get exclusive termios_rwsem if flushing input buffer
*/
-static inline void n_tty_receive_break(struct tty_struct *tty)
+static void n_tty_receive_break(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
@@ -1170,7 +1170,7 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
* private.
*/
-static inline void n_tty_receive_overrun(struct tty_struct *tty)
+static void n_tty_receive_overrun(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
char buf[64];
@@ -1198,8 +1198,7 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty)
* caller holds non-exclusive termios_rwsem
* publishes read_head via put_tty_queue()
*/
-static inline void n_tty_receive_parity_error(struct tty_struct *tty,
- unsigned char c)
+static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 8/9] n_tty: Factor LNEXT processing from per-char i/o path
2013-07-24 12:29 ` [PATCH v3 1/9] " Peter Hurley
` (5 preceding siblings ...)
2013-07-24 12:29 ` [PATCH v3 7/9] n_tty: Un-inline single-use functions Peter Hurley
@ 2013-07-24 12:29 ` Peter Hurley
2013-07-24 12:29 ` [PATCH v3 9/9] tty: Remove extra wakeup from pty write() path Peter Hurley
7 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-24 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
LNEXT processing accounts for ~15% of total cpu time in end-to-end
tty i/o; factor the lnext test/clear from the per-char i/o path.
Instead, attempt to immediately handle the literal next char if not
at the end of this received buffer; otherwise, handle the first char
of the next received buffer as the literal next char, then continue
with normal i/o.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 166 +++++++++++++++++++++++++++++-----------------------
1 file changed, 94 insertions(+), 72 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f516247..d8cf96a 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1248,9 +1248,11 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
* caller holds non-exclusive termios_rwsem
* publishes canon_head if canonical mode is active
* otherwise, publishes read_head via put_tty_queue()
+ *
+ * Returns 1 if LNEXT was received, else returns 0
*/
-static void
+static int
n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
@@ -1260,24 +1262,24 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
if (c == START_CHAR(tty)) {
start_tty(tty);
commit_echoes(tty);
- return;
+ return 0;
}
if (c == STOP_CHAR(tty)) {
stop_tty(tty);
- return;
+ return 0;
}
}
if (L_ISIG(tty)) {
if (c == INTR_CHAR(tty)) {
n_tty_receive_signal_char(tty, SIGINT, c);
- return;
+ return 0;
} else if (c == QUIT_CHAR(tty)) {
n_tty_receive_signal_char(tty, SIGQUIT, c);
- return;
+ return 0;
} else if (c == SUSP_CHAR(tty)) {
n_tty_receive_signal_char(tty, SIGTSTP, c);
- return;
+ return 0;
}
}
@@ -1288,7 +1290,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
if (c == '\r') {
if (I_IGNCR(tty))
- return;
+ return 0;
if (I_ICRNL(tty))
c = '\n';
} else if (c == '\n' && I_INLCR(tty))
@@ -1299,7 +1301,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
(c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
eraser(c, tty);
commit_echoes(tty);
- return;
+ return 0;
}
if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
ldata->lnext = 1;
@@ -1311,10 +1313,9 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
commit_echoes(tty);
}
}
- return;
+ return 1;
}
- if (c == REPRINT_CHAR(tty) && L_ECHO(tty) &&
- L_IEXTEN(tty)) {
+ if (c == REPRINT_CHAR(tty) && L_ECHO(tty) && L_IEXTEN(tty)) {
size_t tail = ldata->canon_head;
finish_erasing(ldata);
@@ -1325,7 +1326,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
tail++;
}
commit_echoes(tty);
- return;
+ return 0;
}
if (c == '\n') {
if (L_ECHO(tty) || L_ECHONL(tty)) {
@@ -1366,7 +1367,7 @@ handle_newline:
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
- return;
+ return 0;
}
}
@@ -1388,43 +1389,36 @@ handle_newline:
put_tty_queue(c, ldata);
put_tty_queue(c, ldata);
+ return 0;
}
-static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+static inline void
+n_tty_receive_char_inline(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
int parmrk;
- /*
- * If the previous character was LNEXT, or we know that this
- * character is not one of the characters that we'll have to
- * handle specially, do shortcut processing to speed things
- * up.
- */
- if (!test_bit(c, ldata->char_map) || ldata->lnext) {
- ldata->lnext = 0;
-
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
- if (L_ECHO(tty)) {
- finish_erasing(ldata);
- /* Record the column of first canon char. */
- if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(ldata);
- echo_char(c, tty);
- commit_echoes(tty);
- }
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (parmrk)
- put_tty_queue(c, ldata);
- put_tty_queue(c, ldata);
- return;
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
}
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
+ if (parmrk)
+ put_tty_queue(c, ldata);
+ put_tty_queue(c, ldata);
+}
- n_tty_receive_char_special(tty, c);
+static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+{
+ n_tty_receive_char_inline(tty, c);
}
static inline void
@@ -1432,33 +1426,19 @@ n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
- /*
- * If the previous character was LNEXT, or we know that this
- * character is not one of the characters that we'll have to
- * handle specially, do shortcut processing to speed things
- * up.
- */
- if (!test_bit(c, ldata->char_map) || ldata->lnext) {
- ldata->lnext = 0;
-
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
- if (L_ECHO(tty)) {
- finish_erasing(ldata);
- /* Record the column of first canon char. */
- if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(ldata);
- echo_char(c, tty);
- commit_echoes(tty);
- }
- put_tty_queue(c, ldata);
- return;
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
}
-
- n_tty_receive_char_special(tty, c);
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ put_tty_queue(c, ldata);
}
static inline void
@@ -1505,6 +1485,22 @@ n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag)
}
}
+static void
+n_tty_receive_char_lnext(struct tty_struct *tty, unsigned char c, char flag)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+
+ ldata->lnext = 0;
+ if (likely(flag == TTY_NORMAL)) {
+ if (I_ISTRIP(tty))
+ c &= 0x7f;
+ if (I_IUCLC(tty) && L_IEXTEN(tty))
+ c = tolower(c);
+ n_tty_receive_char(tty, c);
+ } else
+ n_tty_receive_char_flagged(tty, c, flag);
+}
+
/**
* n_tty_receive_buf - data receive
* @tty: terminal device
@@ -1598,7 +1594,14 @@ n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp,
put_tty_queue(c, ldata);
continue;
}
- n_tty_receive_char(tty, c);
+ if (!test_bit(c, ldata->char_map))
+ n_tty_receive_char_inline(tty, c);
+ else if (n_tty_receive_char_special(tty, c) && count) {
+ if (fp)
+ flag = *fp++;
+ n_tty_receive_char_lnext(tty, *cp++, flag);
+ count--;
+ }
} else
n_tty_receive_char_flagged(tty, *cp++, flag);
}
@@ -1608,14 +1611,24 @@ static void
n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ struct n_tty_data *ldata = tty->disc_data;
char flag = TTY_NORMAL;
while (count--) {
if (fp)
flag = *fp++;
- if (likely(flag == TTY_NORMAL))
- n_tty_receive_char_fast(tty, *cp++);
- else
+ if (likely(flag == TTY_NORMAL)) {
+ unsigned char c = *cp++;
+
+ if (!test_bit(c, ldata->char_map))
+ n_tty_receive_char_fast(tty, c);
+ else if (n_tty_receive_char_special(tty, c) && count) {
+ if (fp)
+ flag = *fp++;
+ n_tty_receive_char_lnext(tty, *cp++, flag);
+ count--;
+ }
+ } else
n_tty_receive_char_flagged(tty, *cp++, flag);
}
}
@@ -1633,6 +1646,15 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
+ if (ldata->lnext) {
+ char flag = TTY_NORMAL;
+
+ if (fp)
+ flag = *fp++;
+ n_tty_receive_char_lnext(tty, *cp++, flag);
+ count--;
+ }
+
if (!preops && !I_PARMRK(tty))
n_tty_receive_buf_fast(tty, cp, fp, count);
else
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v3 9/9] tty: Remove extra wakeup from pty write() path
2013-07-24 12:29 ` [PATCH v3 1/9] " Peter Hurley
` (6 preceding siblings ...)
2013-07-24 12:29 ` [PATCH v3 8/9] n_tty: Factor LNEXT processing from per-char i/o path Peter Hurley
@ 2013-07-24 12:29 ` Peter Hurley
7 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-07-24 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Acquiring the write_wait queue spin lock now accounts for the largest
slice of cpu time on the tty write path. Two factors contribute to
this situation; a overly-pessimistic line discipline write loop which
_always_ sets up a wait loop even if i/o will immediately succeed, and
on ptys, a wakeup storm from reads and writes.
Writer wakeup does not need to be performed by the pty driver.
Firstly, since the actual i/o is performed within the write, the
line discipline write loop will continue while space remains in
the flip buffers. Secondly, when space becomes avail in the
line discipline receive buffer (and thus also in the flip buffers),
the pty unthrottle re-wakes the writer (non-flow-controlled line
disciplines unconditionally unthrottle the driver when data is
received). Thus, existing in-kernel i/o is guaranteed to advance.
Finally, writer wakeup occurs at the conclusion of the line discipline
write (in tty_write_unlock()). This guarantees that any user-space write
waiters are woken to continue additional i/o.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/pty.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index b38a28b..b940127 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -121,10 +121,8 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to->port, buf, c);
/* And shovel */
- if (c) {
+ if (c)
tty_flip_buffer_push(to->port);
- tty_wakeup(tty);
- }
}
return c;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread
* [PATCH v2 13/20] n_tty: Eliminate char tests from IXANY restart test
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (11 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 12/20] n_tty: Factor standard per-char i/o " Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 14/20] n_tty: Split n_tty_receive_char() Peter Hurley
` (6 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Relocate the IXANY restart tty test to code paths where the
the received char is not START_CHAR, STOP_CHAR, INTR_CHAR,
QUIT_CHAR or SUSP_CHAR.
Fixes the condition when ISIG if off and one of INTR_CHAR,
QUIT_CHAR or SUSP_CHAR does not restart i/o.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 785def1..1f21c97 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1268,13 +1268,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
return;
}
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) &&
- c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
-
/*
* If the previous character was LNEXT, or we know that this
* character is not one of the characters that we'll have to
@@ -1283,6 +1276,13 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
*/
if (!test_bit(c, ldata->char_map) || ldata->lnext) {
ldata->lnext = 0;
+
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
+ I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
@@ -1329,6 +1329,11 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
}
}
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
if (c == '\r') {
if (I_IGNCR(tty))
return;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 14/20] n_tty: Split n_tty_receive_char()
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (12 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 13/20] n_tty: Eliminate char tests from IXANY restart test Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 15/20] n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn Peter Hurley
` (5 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Factor 'special' per-char processing into standalone fn,
n_tty_receive_char_special(), which handles processing for chars
marked in the char_map.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 103 ++++++++++++++++++++++++++++------------------------
1 file changed, 56 insertions(+), 47 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 1f21c97..3e96828 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1253,57 +1253,12 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
* otherwise, publishes read_head via put_tty_queue()
*/
-static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+static void
+n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
int parmrk;
- if (I_ISTRIP(tty))
- c &= 0x7f;
- if (I_IUCLC(tty) && L_IEXTEN(tty))
- c = tolower(c);
-
- if (L_EXTPROC(tty)) {
- put_tty_queue(c, ldata);
- return;
- }
-
- /*
- * If the previous character was LNEXT, or we know that this
- * character is not one of the characters that we'll have to
- * handle specially, do shortcut processing to speed things
- * up.
- */
- if (!test_bit(c, ldata->char_map) || ldata->lnext) {
- ldata->lnext = 0;
-
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
-
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
- if (L_ECHO(tty)) {
- finish_erasing(ldata);
- /* Record the column of first canon char. */
- if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(ldata);
- echo_char(c, tty);
- commit_echoes(tty);
- }
- if (parmrk)
- put_tty_queue(c, ldata);
- put_tty_queue(c, ldata);
- return;
- }
-
if (I_IXON(tty)) {
if (c == START_CHAR(tty)) {
start_tty(tty);
@@ -1456,6 +1411,60 @@ handle_newline:
put_tty_queue(c, ldata);
}
+static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+ int parmrk;
+
+ if (I_ISTRIP(tty))
+ c &= 0x7f;
+ if (I_IUCLC(tty) && L_IEXTEN(tty))
+ c = tolower(c);
+
+ if (L_EXTPROC(tty)) {
+ put_tty_queue(c, ldata);
+ return;
+ }
+
+ /*
+ * If the previous character was LNEXT, or we know that this
+ * character is not one of the characters that we'll have to
+ * handle specially, do shortcut processing to speed things
+ * up.
+ */
+ if (!test_bit(c, ldata->char_map) || ldata->lnext) {
+ ldata->lnext = 0;
+
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
+ I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
+ parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ /* beep if no space */
+ if (L_ECHO(tty))
+ process_output('\a', tty);
+ return;
+ }
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ if (parmrk)
+ put_tty_queue(c, ldata);
+ put_tty_queue(c, ldata);
+ return;
+ }
+
+ n_tty_receive_char_special(tty, c);
+}
+
static inline void
n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
{
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 15/20] n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (13 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 14/20] n_tty: Split n_tty_receive_char() Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 16/20] n_tty: Factor PARMRK from normal per-char i/o Peter Hurley
` (4 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Convert to modal receive_buf processing; factor char receive
processing for unusual termios settings out of normal per-char
i/o path.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 44 +++++++++++++++++++++++++++++++-------------
1 file changed, 31 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 3e96828..17cb70e 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1416,16 +1416,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
struct n_tty_data *ldata = tty->disc_data;
int parmrk;
- if (I_ISTRIP(tty))
- c &= 0x7f;
- if (I_IUCLC(tty) && L_IEXTEN(tty))
- c = tolower(c);
-
- if (L_EXTPROC(tty)) {
- put_tty_queue(c, ldata);
- return;
- }
-
/*
* If the previous character was LNEXT, or we know that this
* character is not one of the characters that we'll have to
@@ -1583,9 +1573,34 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
static void
n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp,
- char *fp, int count)
+ char *fp, int count)
+{
+ char flag = TTY_NORMAL;
+
+ while (count--) {
+ if (fp)
+ flag = *fp++;
+ if (likely(flag == TTY_NORMAL)) {
+ unsigned char c = *cp++;
+
+ if (I_ISTRIP(tty))
+ c &= 0x7f;
+ if (I_IUCLC(tty) && L_IEXTEN(tty))
+ c = tolower(c);
+ if (L_EXTPROC(tty)) {
+ put_tty_queue(c, ldata);
+ continue;
+ }
+ n_tty_receive_char(tty, c);
+ } else
+ n_tty_receive_char_flagged(tty, *cp++, flag);
+ }
+}
+
+static void
+n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
{
- struct n_tty_data *ldata = tty->disc_data;
char flag = TTY_NORMAL;
while (count--) {
@@ -1611,7 +1626,10 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
- n_tty_receive_buf_standard(tty, cp, fp, count);
+ if (!preops)
+ n_tty_receive_buf_fast(tty, cp, fp, count);
+ else
+ n_tty_receive_buf_standard(tty, cp, fp, count);
flush_echoes(tty);
if (tty->ops->flush_chars)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 16/20] n_tty: Factor PARMRK from normal per-char i/o
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (14 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 15/20] n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 17/20] n_tty: Remove overflow tests from receive_buf() path Peter Hurley
` (3 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Handle PARMRK processing on the slow per-char i/o path.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 45 +++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 17cb70e..40feeee 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1456,6 +1456,47 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
}
static inline void
+n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+
+ /*
+ * If the previous character was LNEXT, or we know that this
+ * character is not one of the characters that we'll have to
+ * handle specially, do shortcut processing to speed things
+ * up.
+ */
+ if (!test_bit(c, ldata->char_map) || ldata->lnext) {
+ ldata->lnext = 0;
+
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
+ I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
+ }
+
+ if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - 1)) {
+ /* beep if no space */
+ if (L_ECHO(tty))
+ process_output('\a', tty);
+ return;
+ }
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ put_tty_queue(c, ldata);
+ return;
+ }
+
+ n_tty_receive_char_special(tty, c);
+}
+
+static inline void
n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
{
if (I_ISTRIP(tty))
@@ -1607,7 +1648,7 @@ n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp,
if (fp)
flag = *fp++;
if (likely(flag == TTY_NORMAL))
- n_tty_receive_char(tty, *cp++);
+ n_tty_receive_char_fast(tty, *cp++);
else
n_tty_receive_char_flagged(tty, *cp++, flag);
}
@@ -1626,7 +1667,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
- if (!preops)
+ if (!preops && !I_PARMRK(tty))
n_tty_receive_buf_fast(tty, cp, fp, count);
else
n_tty_receive_buf_standard(tty, cp, fp, count);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 17/20] n_tty: Remove overflow tests from receive_buf() path
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (15 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 16/20] n_tty: Factor PARMRK from normal per-char i/o Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 18/20] n_tty: Un-inline single-use functions Peter Hurley
` (2 subsequent siblings)
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Always pre-figure the space available in the read_buf and limit
the inbound receive request to that amount.
For compatibility reasons with the non-flow-controlled interface,
n_tty_receive_buf() will continue filling read_buf until all data
has been received or receive_room() returns 0.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 85 +++++++++++++++++++++++------------------------------
1 file changed, 37 insertions(+), 48 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 40feeee..633cfcf 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -314,12 +314,9 @@ static inline void n_tty_check_unthrottle(struct tty_struct *tty)
* not active.
*/
-static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
+static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
{
- if (read_cnt(ldata) < N_TTY_BUF_SIZE) {
- *read_buf_addr(ldata, ldata->read_head) = c;
- ldata->read_head++;
- }
+ *read_buf_addr(ldata, ldata->read_head++) = c;
}
/**
@@ -1331,11 +1328,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
return;
}
if (c == '\n') {
- if (read_cnt(ldata) >= N_TTY_BUF_SIZE) {
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty) || L_ECHONL(tty)) {
echo_char_raw('\n', ldata);
commit_echoes(tty);
@@ -1343,8 +1335,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
goto handle_newline;
}
if (c == EOF_CHAR(tty)) {
- if (read_cnt(ldata) >= N_TTY_BUF_SIZE)
- return;
c = __DISABLED_CHAR;
goto handle_newline;
}
@@ -1352,11 +1342,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
(c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk)) {
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
/*
* XXX are EOL_CHAR and EOL2_CHAR echoed?!?
*/
@@ -1386,12 +1371,6 @@ handle_newline:
}
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty)) {
finish_erasing(ldata);
if (c == '\n')
@@ -1430,14 +1409,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
start_tty(tty);
process_echoes(tty);
}
-
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty)) {
finish_erasing(ldata);
/* Record the column of first canon char. */
@@ -1446,6 +1417,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
echo_char(c, tty);
commit_echoes(tty);
}
+ parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
if (parmrk)
put_tty_queue(c, ldata);
put_tty_queue(c, ldata);
@@ -1474,13 +1446,6 @@ n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c)
start_tty(tty);
process_echoes(tty);
}
-
- if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - 1)) {
- /* beep if no space */
- if (L_ECHO(tty))
- process_output('\a', tty);
- return;
- }
if (L_ECHO(tty)) {
finish_erasing(ldata);
/* Record the column of first canon char. */
@@ -1688,8 +1653,23 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ int room, n;
+
down_read(&tty->termios_rwsem);
- __receive_buf(tty, cp, fp, count);
+
+ while (1) {
+ room = receive_room(tty);
+ n = min(count, room);
+ if (!n)
+ break;
+ __receive_buf(tty, cp, fp, n);
+ cp += n;
+ if (fp)
+ fp += n;
+ count -= n;
+ }
+
+ tty->receive_room = room;
n_tty_check_throttle(tty);
up_read(&tty->termios_rwsem);
}
@@ -1698,22 +1678,31 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
struct n_tty_data *ldata = tty->disc_data;
- int room;
+ int room, n, rcvd = 0;
down_read(&tty->termios_rwsem);
- tty->receive_room = room = receive_room(tty);
- if (!room)
- ldata->no_room = 1;
- count = min(count, room);
- if (count) {
- __receive_buf(tty, cp, fp, count);
- n_tty_check_throttle(tty);
+ while (1) {
+ room = receive_room(tty);
+ n = min(count, room);
+ if (!n) {
+ if (!room)
+ ldata->no_room = 1;
+ break;
+ }
+ __receive_buf(tty, cp, fp, n);
+ cp += n;
+ if (fp)
+ fp += n;
+ count -= n;
+ rcvd += n;
}
+ tty->receive_room = room;
+ n_tty_check_throttle(tty);
up_read(&tty->termios_rwsem);
- return count;
+ return rcvd;
}
int is_ignored(int sig)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 18/20] n_tty: Un-inline single-use functions
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (16 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 17/20] n_tty: Remove overflow tests from receive_buf() path Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 19/20] n_tty: Factor LNEXT processing from per-char i/o path Peter Hurley
2013-06-15 14:21 ` [PATCH v2 20/20] tty: Remove extra wakeup from pty write() path Peter Hurley
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
gcc will likely inline these single-use functions anyway; remove
inline modifier.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 633cfcf..5e06aa1 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -263,7 +263,7 @@ static void n_tty_check_throttle(struct tty_struct *tty)
__tty_set_flow_change(tty, 0);
}
-static inline void n_tty_check_unthrottle(struct tty_struct *tty)
+static void n_tty_check_unthrottle(struct tty_struct *tty)
{
if (tty->driver->type == TTY_DRIVER_TYPE_PTY) {
if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
@@ -1108,7 +1108,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
* Locking: ctrl_lock
*/
-static inline void isig(int sig, struct tty_struct *tty)
+static void isig(int sig, struct tty_struct *tty)
{
struct pid *tty_pgrp = tty_get_pgrp(tty);
if (tty_pgrp) {
@@ -1131,7 +1131,7 @@ static inline void isig(int sig, struct tty_struct *tty)
* Note: may get exclusive termios_rwsem if flushing input buffer
*/
-static inline void n_tty_receive_break(struct tty_struct *tty)
+static void n_tty_receive_break(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
@@ -1169,7 +1169,7 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
* private.
*/
-static inline void n_tty_receive_overrun(struct tty_struct *tty)
+static void n_tty_receive_overrun(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
char buf[64];
@@ -1197,8 +1197,7 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty)
* caller holds non-exclusive termios_rwsem
* publishes read_head via put_tty_queue()
*/
-static inline void n_tty_receive_parity_error(struct tty_struct *tty,
- unsigned char c)
+static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 19/20] n_tty: Factor LNEXT processing from per-char i/o path
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (17 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 18/20] n_tty: Un-inline single-use functions Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-06-15 14:21 ` [PATCH v2 20/20] tty: Remove extra wakeup from pty write() path Peter Hurley
19 siblings, 0 replies; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
LNEXT processing accounts for ~15% of total cpu time in end-to-end
tty i/o; factor the lnext test/clear from the per-char i/o path.
Instead, attempt to immediately handle the literal next char if not
at the end of this received buffer; otherwise, handle the first char
of the next received buffer as the literal next char, then continue
with normal i/o.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/n_tty.c | 167 ++++++++++++++++++++++++++++++----------------------
1 file changed, 95 insertions(+), 72 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 5e06aa1..640fb35 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1247,9 +1247,11 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
* caller holds non-exclusive termios_rwsem
* publishes canon_head if canonical mode is active
* otherwise, publishes read_head via put_tty_queue()
+ *
+ * Returns 1 if LNEXT was received, else returns 0
*/
-static void
+static int
n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
@@ -1259,24 +1261,24 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
if (c == START_CHAR(tty)) {
start_tty(tty);
commit_echoes(tty);
- return;
+ return 0;
}
if (c == STOP_CHAR(tty)) {
stop_tty(tty);
- return;
+ return 0;
}
}
if (L_ISIG(tty)) {
if (c == INTR_CHAR(tty)) {
n_tty_receive_signal_char(tty, SIGINT, c);
- return;
+ return 0;
} else if (c == QUIT_CHAR(tty)) {
n_tty_receive_signal_char(tty, SIGQUIT, c);
- return;
+ return 0;
} else if (c == SUSP_CHAR(tty)) {
n_tty_receive_signal_char(tty, SIGTSTP, c);
- return;
+ return 0;
}
}
@@ -1287,7 +1289,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
if (c == '\r') {
if (I_IGNCR(tty))
- return;
+ return 0;
if (I_ICRNL(tty))
c = '\n';
} else if (c == '\n' && I_INLCR(tty))
@@ -1298,7 +1300,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
(c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
eraser(c, tty);
commit_echoes(tty);
- return;
+ return 0;
}
if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
ldata->lnext = 1;
@@ -1310,10 +1312,9 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
commit_echoes(tty);
}
}
- return;
+ return 1;
}
- if (c == REPRINT_CHAR(tty) && L_ECHO(tty) &&
- L_IEXTEN(tty)) {
+ if (c == REPRINT_CHAR(tty) && L_ECHO(tty) && L_IEXTEN(tty)) {
size_t tail = ldata->canon_head;
finish_erasing(ldata);
@@ -1324,7 +1325,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
tail++;
}
commit_echoes(tty);
- return;
+ return 0;
}
if (c == '\n') {
if (L_ECHO(tty) || L_ECHONL(tty)) {
@@ -1365,7 +1366,7 @@ handle_newline:
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
- return;
+ return 0;
}
}
@@ -1387,43 +1388,36 @@ handle_newline:
put_tty_queue(c, ldata);
put_tty_queue(c, ldata);
+ return 0;
}
-static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+static inline void
+n_tty_receive_char_inline(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
int parmrk;
- /*
- * If the previous character was LNEXT, or we know that this
- * character is not one of the characters that we'll have to
- * handle specially, do shortcut processing to speed things
- * up.
- */
- if (!test_bit(c, ldata->char_map) || ldata->lnext) {
- ldata->lnext = 0;
-
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
- if (L_ECHO(tty)) {
- finish_erasing(ldata);
- /* Record the column of first canon char. */
- if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(ldata);
- echo_char(c, tty);
- commit_echoes(tty);
- }
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (parmrk)
- put_tty_queue(c, ldata);
- put_tty_queue(c, ldata);
- return;
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
}
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
+ if (parmrk)
+ put_tty_queue(c, ldata);
+ put_tty_queue(c, ldata);
+}
- n_tty_receive_char_special(tty, c);
+static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+{
+ n_tty_receive_char_inline(tty, c);
}
static inline void
@@ -1431,33 +1425,19 @@ n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
- /*
- * If the previous character was LNEXT, or we know that this
- * character is not one of the characters that we'll have to
- * handle specially, do shortcut processing to speed things
- * up.
- */
- if (!test_bit(c, ldata->char_map) || ldata->lnext) {
- ldata->lnext = 0;
-
- if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
- I_IXANY(tty)) {
- start_tty(tty);
- process_echoes(tty);
- }
- if (L_ECHO(tty)) {
- finish_erasing(ldata);
- /* Record the column of first canon char. */
- if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(ldata);
- echo_char(c, tty);
- commit_echoes(tty);
- }
- put_tty_queue(c, ldata);
- return;
+ if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) {
+ start_tty(tty);
+ process_echoes(tty);
}
-
- n_tty_receive_char_special(tty, c);
+ if (L_ECHO(tty)) {
+ finish_erasing(ldata);
+ /* Record the column of first canon char. */
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
+ echo_char(c, tty);
+ commit_echoes(tty);
+ }
+ put_tty_queue(c, ldata);
}
static inline void
@@ -1504,6 +1484,22 @@ n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag)
}
}
+static void
+n_tty_receive_char_lnext(struct tty_struct *tty, unsigned char c, char flag)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+
+ ldata->lnext = 0;
+ if (likely(flag == TTY_NORMAL)) {
+ if (I_ISTRIP(tty))
+ c &= 0x7f;
+ if (I_IUCLC(tty) && L_IEXTEN(tty))
+ c = tolower(c);
+ n_tty_receive_char(tty, c);
+ } else
+ n_tty_receive_char_flagged(tty, c, flag);
+}
+
/**
* n_tty_receive_buf - data receive
* @tty: terminal device
@@ -1580,6 +1576,7 @@ static void
n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ struct n_tty_data *ldata = tty->disc_data;
char flag = TTY_NORMAL;
while (count--) {
@@ -1596,7 +1593,14 @@ n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp,
put_tty_queue(c, ldata);
continue;
}
- n_tty_receive_char(tty, c);
+ if (!test_bit(c, ldata->char_map))
+ n_tty_receive_char_inline(tty, c);
+ else if (n_tty_receive_char_special(tty, c) && count) {
+ if (fp)
+ flag = *fp++;
+ n_tty_receive_char_lnext(tty, *cp++, flag);
+ count--;
+ }
} else
n_tty_receive_char_flagged(tty, *cp++, flag);
}
@@ -1606,14 +1610,24 @@ static void
n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ struct n_tty_data *ldata = tty->disc_data;
char flag = TTY_NORMAL;
while (count--) {
if (fp)
flag = *fp++;
- if (likely(flag == TTY_NORMAL))
- n_tty_receive_char_fast(tty, *cp++);
- else
+ if (likely(flag == TTY_NORMAL)) {
+ unsigned char c = *cp++;
+
+ if (!test_bit(c, ldata->char_map))
+ n_tty_receive_char_fast(tty, c);
+ else if (n_tty_receive_char_special(tty, c) && count) {
+ if (fp)
+ flag = *fp++;
+ n_tty_receive_char_lnext(tty, *cp++, flag);
+ count--;
+ }
+ } else
n_tty_receive_char_flagged(tty, *cp++, flag);
}
}
@@ -1631,6 +1645,15 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
+ if (ldata->lnext) {
+ char flag = TTY_NORMAL;
+
+ if (fp)
+ flag = *fp++;
+ n_tty_receive_char_lnext(tty, *cp++, flag);
+ count--;
+ }
+
if (!preops && !I_PARMRK(tty))
n_tty_receive_buf_fast(tty, cp, fp, count);
else
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* [PATCH v2 20/20] tty: Remove extra wakeup from pty write() path
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
` (18 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 19/20] n_tty: Factor LNEXT processing from per-char i/o path Peter Hurley
@ 2013-06-15 14:21 ` Peter Hurley
2013-07-20 17:00 ` Peter Hurley
19 siblings, 1 reply; 238+ messages in thread
From: Peter Hurley @ 2013-06-15 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby, Peter Hurley
Acquiring the write_wait queue spin lock now accounts for the largest
slice of cpu time on the tty write path. Two factors contribute to
this situation; a overly-pessimistic line discipline write loop which
_always_ sets up a wait loop even if i/o will immediately succeed, and
on ptys, a wakeup storm from reads and writes.
Writer wakeup does not need to be performed by the pty driver.
Firstly, since the actual i/o is performed within the write, the
line discipline write loop will continue while space remains in
the flip buffers. Secondly, when space becomes avail in the
line discipline receive buffer (and thus also in the flip buffers),
the pty unthrottle re-wakes the writer (non-flow-controlled line
disciplines unconditionally unthrottle the driver when data is
received). Thus, existing in-kernel i/o is guaranteed to advance.
Finally, writer wakeup occurs at the conclusion of the line discipline
write (in tty_write_unlock()). This guarantees that any user-space write
waiters are woken to continue additional i/o.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/pty.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 0634dd9..b9bc5be 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -121,10 +121,8 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to->port, buf, c);
/* And shovel */
- if (c) {
+ if (c)
tty_flip_buffer_push(to->port);
- tty_wakeup(tty);
- }
}
return c;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 238+ messages in thread* Re: [PATCH v2 20/20] tty: Remove extra wakeup from pty write() path
2013-06-15 14:21 ` [PATCH v2 20/20] tty: Remove extra wakeup from pty write() path Peter Hurley
@ 2013-07-20 17:00 ` Peter Hurley
2013-07-23 12:57 ` Peter Hurley
0 siblings, 1 reply; 238+ messages in thread
From: Peter Hurley @ 2013-07-20 17:00 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Peter Hurley, linux-kernel, linux-serial, Jiri Slaby,
Andre Naujoks, Dean Jenkins
On 06/15/2013 10:21 AM, Peter Hurley wrote:
> Acquiring the write_wait queue spin lock now accounts for the largest
> slice of cpu time on the tty write path. Two factors contribute to
> this situation; a overly-pessimistic line discipline write loop which
> _always_ sets up a wait loop even if i/o will immediately succeed, and
> on ptys, a wakeup storm from reads and writes.
>
> Writer wakeup does not need to be performed by the pty driver.
> Firstly, since the actual i/o is performed within the write, the
> line discipline write loop will continue while space remains in
> the flip buffers. Secondly, when space becomes avail in the
> line discipline receive buffer (and thus also in the flip buffers),
> the pty unthrottle re-wakes the writer (non-flow-controlled line
> disciplines unconditionally unthrottle the driver when data is
> received). Thus, existing in-kernel i/o is guaranteed to advance.
> Finally, writer wakeup occurs at the conclusion of the line discipline
> write (in tty_write_unlock()). This guarantees that any user-space write
> waiters are woken to continue additional i/o.
Greg,
I thought I should let you know I'm tracking down a bug/regression
related to this patch.
In certain unusual pty/ldisc configurations, i/o fails to make
forward progress. I still stand by my commit message above, so I'm
in the process of instrumenting the i/o path so I can uncover the
cause of the failure.
I would still recommend applying this patch to tty-next, as it
resolves a much more critical bug discussed here [1].
Doing a write_wakeup() from a driver .write() method is a no-no;
recursion is possible and results in a thread stack overrun.
Regards,
Peter Hurley
[1]
https://lkml.org/lkml/2013/7/1/308
> Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
> ---
> drivers/tty/pty.c | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
> index 0634dd9..b9bc5be 100644
> --- a/drivers/tty/pty.c
> +++ b/drivers/tty/pty.c
> @@ -121,10 +121,8 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
> /* Stuff the data into the input queue of the other end */
> c = tty_insert_flip_string(to->port, buf, c);
> /* And shovel */
> - if (c) {
> + if (c)
> tty_flip_buffer_push(to->port);
> - tty_wakeup(tty);
> - }
> }
> return c;
> }
>
^ permalink raw reply [flat|nested] 238+ messages in thread* Re: [PATCH v2 20/20] tty: Remove extra wakeup from pty write() path
2013-07-20 17:00 ` Peter Hurley
@ 2013-07-23 12:57 ` Peter Hurley
2013-07-23 15:02 ` Greg Kroah-Hartman
0 siblings, 1 reply; 238+ messages in thread
From: Peter Hurley @ 2013-07-23 12:57 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Peter Hurley, linux-kernel, linux-serial, Jiri Slaby,
Andre Naujoks, Dean Jenkins
On 07/20/2013 01:00 PM, Peter Hurley wrote:
> On 06/15/2013 10:21 AM, Peter Hurley wrote:
>> Acquiring the write_wait queue spin lock now accounts for the largest
>> slice of cpu time on the tty write path. Two factors contribute to
>> this situation; a overly-pessimistic line discipline write loop which
>> _always_ sets up a wait loop even if i/o will immediately succeed, and
>> on ptys, a wakeup storm from reads and writes.
>>
>> Writer wakeup does not need to be performed by the pty driver.
>> Firstly, since the actual i/o is performed within the write, the
>> line discipline write loop will continue while space remains in
>> the flip buffers. Secondly, when space becomes avail in the
>> line discipline receive buffer (and thus also in the flip buffers),
>> the pty unthrottle re-wakes the writer (non-flow-controlled line
>> disciplines unconditionally unthrottle the driver when data is
>> received). Thus, existing in-kernel i/o is guaranteed to advance.
>> Finally, writer wakeup occurs at the conclusion of the line discipline
>> write (in tty_write_unlock()). This guarantees that any user-space write
>> waiters are woken to continue additional i/o.
>
> Greg,
>
> I thought I should let you know I'm tracking down a bug/regression
> related to this patch.
>
> In certain unusual pty/ldisc configurations, i/o fails to make
> forward progress. I still stand by my commit message above, so I'm
> in the process of instrumenting the i/o path so I can uncover the
> cause of the failure.
Mystery solved.
[PATCH v4 23/24] n_tty: Special case pty flow control
from the lockless n_tty receive path series introduced a regression
in which i/o failed to advance.
This only occurred when one end of a pty pair was set to an ldisc
other than N_TTY. The special case optimization which that patch
introduces failed to address that configuration.
I've sent a v5 of that patch to resolve the regression.
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 238+ messages in thread
* Re: [PATCH v2 20/20] tty: Remove extra wakeup from pty write() path
2013-07-23 12:57 ` Peter Hurley
@ 2013-07-23 15:02 ` Greg Kroah-Hartman
0 siblings, 0 replies; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-07-23 15:02 UTC (permalink / raw)
To: Peter Hurley
Cc: linux-kernel, linux-serial, Jiri Slaby, Andre Naujoks, Dean Jenkins
On Tue, Jul 23, 2013 at 08:57:44AM -0400, Peter Hurley wrote:
> On 07/20/2013 01:00 PM, Peter Hurley wrote:
> >On 06/15/2013 10:21 AM, Peter Hurley wrote:
> >>Acquiring the write_wait queue spin lock now accounts for the largest
> >>slice of cpu time on the tty write path. Two factors contribute to
> >>this situation; a overly-pessimistic line discipline write loop which
> >>_always_ sets up a wait loop even if i/o will immediately succeed, and
> >>on ptys, a wakeup storm from reads and writes.
> >>
> >>Writer wakeup does not need to be performed by the pty driver.
> >>Firstly, since the actual i/o is performed within the write, the
> >>line discipline write loop will continue while space remains in
> >>the flip buffers. Secondly, when space becomes avail in the
> >>line discipline receive buffer (and thus also in the flip buffers),
> >>the pty unthrottle re-wakes the writer (non-flow-controlled line
> >>disciplines unconditionally unthrottle the driver when data is
> >>received). Thus, existing in-kernel i/o is guaranteed to advance.
> >>Finally, writer wakeup occurs at the conclusion of the line discipline
> >>write (in tty_write_unlock()). This guarantees that any user-space write
> >>waiters are woken to continue additional i/o.
> >
> >Greg,
> >
> >I thought I should let you know I'm tracking down a bug/regression
> >related to this patch.
> >
> >In certain unusual pty/ldisc configurations, i/o fails to make
> >forward progress. I still stand by my commit message above, so I'm
> >in the process of instrumenting the i/o path so I can uncover the
> >cause of the failure.
>
> Mystery solved.
>
> [PATCH v4 23/24] n_tty: Special case pty flow control
> from the lockless n_tty receive path series introduced a regression
> in which i/o failed to advance.
>
> This only occurred when one end of a pty pair was set to an ldisc
> other than N_TTY. The special case optimization which that patch
> introduces failed to address that configuration.
>
> I've sent a v5 of that patch to resolve the regression.
Thanks for that, I'll work to queue all of your tty patches up today, as
they have been sitting out of the tree for too long :)
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread
* Re: [PATCH v2 0/9] mostly lockless tty echo
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
` (9 preceding siblings ...)
2013-06-15 14:21 ` [PATCH v2 00/20] tty: streamline per-char receiving Peter Hurley
@ 2013-07-24 0:04 ` Greg Kroah-Hartman
10 siblings, 0 replies; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-07-24 0:04 UTC (permalink / raw)
To: Peter Hurley; +Cc: linux-kernel, linux-serial, Jiri Slaby
On Sat, Jun 15, 2013 at 10:04:20AM -0400, Peter Hurley wrote:
> ** v2 changes **
> - Rebased on v2 of 'lockless tty flip buffers'
>
> This 3rd of 4 patchsets implements a mostly-lockless tty echo output.
>
> Because echoing is performed solely by the single-threaded ldisc
> receive_buf() method, most of the lockless requirements are already
> in-place. The main existing complications were;
> 1) Echoing could overrun itself. A fixed-size buffer is used to record
> the operations necessary when outputting the echoes; the most recent
> echo data is preserved.
> 2) An attempt to push unprocessed echoes is made by the n_tty_write method
> (on a different thread) before attempting write output.
>
> The overrun condition is solved by outputting the echoes in blocks and
> ensuring that at least that much space is available each time an echo
> operation is committed. At the conclusion of each flip buffer received,
> any remaining unprocessed echoes are output.
>
> This block output method is particularly effective when there is no reader
> (the tty is output-only) and termios is misconfigured with echo enabled.
>
> The concurrent access by the n_tty_write() method is already excluded
> by the existing output_lock mutex.
Applied, thanks.
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread
* Re: [PATCH v2 00/16] lockless tty flip buffers
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
` (16 preceding siblings ...)
2013-06-15 14:04 ` [PATCH v2 0/9] mostly lockless tty echo Peter Hurley
@ 2013-07-23 23:53 ` Greg Kroah-Hartman
17 siblings, 0 replies; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-07-23 23:53 UTC (permalink / raw)
To: Peter Hurley; +Cc: linux-kernel, linux-serial, Jiri Slaby
On Sat, Jun 15, 2013 at 09:36:00AM -0400, Peter Hurley wrote:
> ** v2 changes **
> - Rebased on v4 of 'lockless n_tty receive path'
>
> This 2nd of 4 patchsets implements lockless receive from the tty driver.
> By lockless, I'm referring to the 'lock' spin lock formerly used to
> serialize access to the flip buffer list.
>
> Since the driver-side flip buffer usage is already single-threaded and
> line discipline receiving is already single-threaded, implementing
> a lockless flip buffer list was the primary hurdle. [The only 2 flip
> buffer consumers, flush_to_ldisc() and tty_buffer_flush() were already
> mutually exclusive and this exclusion remains although the mechanism
> is changed.]
>
> Since the flip buffer consumers, flush_to_ldisc() and tty_buffer_flush(),
> already leave the last-consumed flip buffer on the list, and since the
> existing flip buffer api is already divided into an add/commit interface,
> most of the requirement for a lockless algorithm was already
> in-place. The main differences are;
> 1) the initial state of the flip buffer list points head and tail
> to a 0-sized sentinel flip buffer. This eliminates head & tail NULL
> testing and assigning the head ptr from the driver-side thread. This
> sentinel is 'consumed' on the first iteration of ldisc receiving and
> does not require special-case logic.
> 2) the free list uses the atomic singly-linked llist interface. While
> this guarantees safe concurrent usage by both producer and consumer,
> it's not optimal. Both producer and consumer unnecessarily contend
> over the free list head ptr; a better approach would be to maintain
> an unconsumed buffer in the same way the flip buffer list works.
> Light testing has shown this contention accounts for roughly 5% of
> total cpu time in end-to-end copying.
> 3) The mutual exclusion between consumers is reimplemented as a mutex;
> this eliminates the need to drop the lock across the ldisc
> receive_buf() method. This mutual exclusion is extended to a public
> interface which the vt driver now uses to safely utilize the ldisc
> receive_buf() interface when pasting a selection.
All applied, thanks.
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread
* Re: [PATCH v4 00/24] lockless n_tty receive path
2013-06-15 13:14 ` [PATCH v4 00/24] lockless n_tty receive path Peter Hurley
` (24 preceding siblings ...)
2013-06-15 13:36 ` [PATCH v2 00/16] lockless tty flip buffers Peter Hurley
@ 2013-06-17 20:01 ` Greg Kroah-Hartman
2013-06-17 20:32 ` Peter Hurley
25 siblings, 1 reply; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-06-17 20:01 UTC (permalink / raw)
To: Peter Hurley; +Cc: linux-kernel, linux-serial, Jiri Slaby
On Sat, Jun 15, 2013 at 09:14:12AM -0400, Peter Hurley wrote:
> Greg,
>
> As before, this patchset is dependent on the 'ldsem patchset'.
> The reason is that this series abandons tty->receive_room as
> a flow control mechanism (because that requires locking),
> and the TIOCSETD ioctl _without ldsem_ uses tty->receive_room
> to shutoff i/o.
>
> It is also dependent on 'n_tty fixes' which I recently resent
> to you.
Thanks for rebasing all of this, and resending it. It's late in the
3.11 development cycle, so I'm going to wait unto 3.11-rc1 is out to
queue it up for 3.12, to get it lots of testing in linux-next. So don't
worry, they aren't lost, just waiting a few more weeks before I can
apply them.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread* Re: [PATCH v4 00/24] lockless n_tty receive path
2013-06-17 20:01 ` [PATCH v4 00/24] lockless n_tty receive path Greg Kroah-Hartman
@ 2013-06-17 20:32 ` Peter Hurley
2013-07-23 23:44 ` Greg Kroah-Hartman
0 siblings, 1 reply; 238+ messages in thread
From: Peter Hurley @ 2013-06-17 20:32 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, linux-serial, Jiri Slaby
On 06/17/2013 04:01 PM, Greg Kroah-Hartman wrote:
> On Sat, Jun 15, 2013 at 09:14:12AM -0400, Peter Hurley wrote:
>> Greg,
>>
>> As before, this patchset is dependent on the 'ldsem patchset'.
>> The reason is that this series abandons tty->receive_room as
>> a flow control mechanism (because that requires locking),
>> and the TIOCSETD ioctl _without ldsem_ uses tty->receive_room
>> to shutoff i/o.
>>
>> It is also dependent on 'n_tty fixes' which I recently resent
>> to you.
>
> Thanks for rebasing all of this, and resending it. It's late in the
> 3.11 development cycle, so I'm going to wait unto 3.11-rc1 is out to
> queue it up for 3.12, to get it lots of testing in linux-next.
Thanks Greg. I actually meant to suggest these be held until after
the merge window but I got distracted by the VT1 deallocation bug
report.
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 238+ messages in thread
* Re: [PATCH v4 00/24] lockless n_tty receive path
2013-06-17 20:32 ` Peter Hurley
@ 2013-07-23 23:44 ` Greg Kroah-Hartman
0 siblings, 0 replies; 238+ messages in thread
From: Greg Kroah-Hartman @ 2013-07-23 23:44 UTC (permalink / raw)
To: Peter Hurley; +Cc: linux-kernel, linux-serial, Jiri Slaby
On Mon, Jun 17, 2013 at 04:32:10PM -0400, Peter Hurley wrote:
> On 06/17/2013 04:01 PM, Greg Kroah-Hartman wrote:
> >On Sat, Jun 15, 2013 at 09:14:12AM -0400, Peter Hurley wrote:
> >>Greg,
> >>
> >>As before, this patchset is dependent on the 'ldsem patchset'.
> >>The reason is that this series abandons tty->receive_room as
> >>a flow control mechanism (because that requires locking),
> >>and the TIOCSETD ioctl _without ldsem_ uses tty->receive_room
> >>to shutoff i/o.
> >>
> >>It is also dependent on 'n_tty fixes' which I recently resent
> >>to you.
> >
> >Thanks for rebasing all of this, and resending it. It's late in the
> >3.11 development cycle, so I'm going to wait unto 3.11-rc1 is out to
> >queue it up for 3.12, to get it lots of testing in linux-next.
>
> Thanks Greg. I actually meant to suggest these be held until after
> the merge window but I got distracted by the VT1 deallocation bug
> report.
Now applied, thanks.
greg k-h
^ permalink raw reply [flat|nested] 238+ messages in thread