linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Holler <holler@ahsoftware.de>
To: linux-kernel@vger.kernel.org
Cc: rtc-linux@googlegroups.com,
	Andrew Morton <akpm@linux-foundation.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Jonathan Cameron <jic23@cam.ac.uk>, Jiri Kosina <jkosina@suse.cz>,
	John Stultz <john.stultz@linaro.org>,
	Alexander Holler <holler@ahsoftware.de>
Subject: [PATCH 2/4] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes.
Date: Sun,  5 May 2013 13:21:25 +0200	[thread overview]
Message-ID: <1367752887-2927-3-git-send-email-holler@ahsoftware.de> (raw)
In-Reply-To: <1367752887-2927-1-git-send-email-holler@ahsoftware.de>

There is no real reason to not support 16 or 32 bit values too.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
---
 drivers/rtc/rtc-hid-sensor-time.c | 59 +++++++++++++++++++++------------------
 1 file changed, 32 insertions(+), 27 deletions(-)

diff --git a/drivers/rtc/rtc-hid-sensor-time.c b/drivers/rtc/rtc-hid-sensor-time.c
index b8c1b10..7273b01 100644
--- a/drivers/rtc/rtc-hid-sensor-time.c
+++ b/drivers/rtc/rtc-hid-sensor-time.c
@@ -76,6 +76,20 @@ static int hid_time_proc_event(struct hid_sensor_hub_device *hsdev,
 	return 0;
 }
 
+static u32 hid_time_value(size_t raw_len, char *raw_data)
+{
+	switch (raw_len) {
+	case 1:
+		return *(u8 *)raw_data;
+	case 2:
+		return *(u16 *)raw_data;
+	case 4:
+		return *(u32 *)raw_data;
+	default:
+		return (u32)(~0U); /* 0xff... or -1 to denote an error */
+	}
+}
+
 static int hid_time_capture_sample(struct hid_sensor_hub_device *hsdev,
 				unsigned usage_id, size_t raw_len,
 				char *raw_data, void *priv)
@@ -85,29 +99,35 @@ static int hid_time_capture_sample(struct hid_sensor_hub_device *hsdev,
 
 	switch (usage_id) {
 	case HID_USAGE_SENSOR_TIME_YEAR:
+		/*
+		 * The draft for HID-sensors (HUTRR39) currently doesn't define
+		 * the range for the year attribute. Therefor we support
+		 * 8 bit (0-99) and 16 or 32 bits (full) as size for the year.
+		 */
 		if (raw_len == 1) {
 			time_buf->tm_year = *(u8 *)raw_data;
 			if (time_buf->tm_year < 70)
 				/* assume we are in 1970...2069 */
 				time_buf->tm_year += 100;
 		} else
-			time_buf->tm_year = *(u16 *)raw_data-1900;
+			time_buf->tm_year =
+				(int)hid_time_value(raw_len, raw_data)-1900;
 		break;
 	case HID_USAGE_SENSOR_TIME_MONTH:
-		/* sensor sending the month as 1-12, we need 0-11 */
-		time_buf->tm_mon = *(u8 *)raw_data-1;
+		/* sensors are sending the month as 1-12, we need 0-11 */
+		time_buf->tm_mon = (int)hid_time_value(raw_len, raw_data)-1;
 		break;
 	case HID_USAGE_SENSOR_TIME_DAY:
-		time_buf->tm_mday = *(u8 *)raw_data;
+		time_buf->tm_mday = (int)hid_time_value(raw_len, raw_data);
 		break;
 	case HID_USAGE_SENSOR_TIME_HOUR:
-		time_buf->tm_hour = *(u8 *)raw_data;
+		time_buf->tm_hour = (int)hid_time_value(raw_len, raw_data);
 		break;
 	case HID_USAGE_SENSOR_TIME_MINUTE:
-		time_buf->tm_min = *(u8 *)raw_data;
+		time_buf->tm_min = (int)hid_time_value(raw_len, raw_data);
 		break;
 	case HID_USAGE_SENSOR_TIME_SECOND:
-		time_buf->tm_sec = *(u8 *)raw_data;
+		time_buf->tm_sec = (int)hid_time_value(raw_len, raw_data);
 		break;
 	default:
 		return -EINVAL;
@@ -153,28 +173,13 @@ static int hid_time_parse_report(struct platform_device *pdev,
 				"not all needed attributes inside the same report!\n");
 			return -EINVAL;
 		}
-		if (time_state->info[i].size != 1) {
-			/*
-			 * The draft for HID-sensors (HUTRR39) currently
-			 * doesn't define the range for the year attribute.
-			 * Therefor we support both 8 bit (0-99) and 16 bit
-			 * (full) as size for the year.
-			 */
-			if (time_state->info[i].attrib_id !=
-				HID_USAGE_SENSOR_TIME_YEAR) {
-				dev_err(&pdev->dev,
-					"attribute '%s' not 8 bits wide!\n",
-				hid_time_attrib_name(
-					time_state->info[i].attrib_id));
-				return -EINVAL;
-			}
-			if (time_state->info[i].size != 2) {
-				dev_err(&pdev->dev,
-					"attribute '%s' not 8 or 16 bits wide!\n",
+		if (time_state->info[i].size == 3 ||
+				time_state->info[i].size > 4) {
+			dev_err(&pdev->dev,
+				"attribute '%s' not 8, 16 or 32 bits wide!\n",
 				hid_time_attrib_name(
 					time_state->info[i].attrib_id));
-				return -EINVAL;
-			}
+			return -EINVAL;
 		}
 		if (time_state->info[i].units !=
 				HID_USAGE_SENSOR_UNITS_NOT_SPECIFIED &&
-- 
1.8.1.5


  parent reply	other threads:[~2013-05-05 11:22 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-19 15:14 [PATCH 0/3] rtc: rtc-hid-sensor-time Alexander Holler
2013-04-19 15:14 ` [PATCH 1/3 RESEND] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-04-19 15:14 ` [PATCH 2/3] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes Alexander Holler
2013-04-19 15:14 ` [PATCH 3/3] rtc: rtc-hid-sensor-time; add option hctosys to set time at boot Alexander Holler
2013-04-22 23:38   ` Andrew Morton
2013-04-23  8:51     ` Alexander Holler
2013-04-23 10:08       ` Alexander Holler
2013-04-23 10:13         ` Alexander Holler
2013-04-23 10:17           ` Alexander Holler
2013-04-23 15:47             ` Alexander Holler
2013-04-24 21:14               ` Andrew Morton
2013-04-25  6:55                 ` Alexander Holler
2013-05-05 11:21             ` [PATCH 0/4] rtc: rtc-hid-sensor-time: some changes Alexander Holler
2013-05-05 11:21               ` [PATCH 1/4] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-05-05 11:21               ` Alexander Holler [this message]
2013-05-05 11:21               ` [PATCH 3/4] rtc: rtc-hid-sensor-time: add option hctosys to set time at boot Alexander Holler
2013-05-21 21:42                 ` Andrew Morton
2013-05-21 22:02                 ` John Stultz
2013-05-21 23:15                   ` Alexander Holler
2013-05-28 19:37                     ` John Stultz
2013-05-29  4:42                       ` Alexander Holler
2013-06-04 13:41                         ` Alexander Holler
2013-06-05 17:15                           ` [PATCH 0/3] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-05 17:15                             ` [PATCH 1/3] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-05 17:15                             ` [PATCH 2/3] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-05 17:15                             ` [PATCH 3/3] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-06 10:51                             ` [PATCH 0/3 v2] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-06 10:51                               ` [PATCH 1/3 RESEND] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-06 10:51                               ` [PATCH 2/3 v2] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-13 19:39                                 ` Alexander Holler
2013-06-14 16:52                                   ` [PATCH 0/9 v3] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-14 16:52                                     ` [PATCH 1/9 RESEND] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-06-14 16:52                                     ` [PATCH 2/9 RESEND] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes Alexander Holler
2013-06-14 16:52                                     ` [PATCH 3/9] rtc: rtc-hid-sensor-time: delay registering as rtc into a work Alexander Holler
2013-06-20 10:39                                       ` [PATCH 3/9 v2] " Alexander Holler
2013-06-26 19:55                                         ` Andrew Morton
2013-06-26 21:34                                           ` [rtc-linux] " Alexander Holler
2013-06-26 22:07                                             ` Greg KH
2013-06-26 23:51                                               ` Alexander Holler
2013-07-06  8:55                                                 ` Alexander Holler
2013-07-06 18:21                                                   ` Jiri Kosina
2013-07-07  7:35                                                     ` Alexander Holler
2013-07-08  9:12                                                       ` [PATCH 0/2] rtc: rtc-hid-sensor-time: enable HID input processing early Alexander Holler
2013-07-08  9:12                                                         ` [PATCH 1/2] rtc: rtc-hid-sensor-time: improve error handling when rtc register fails Alexander Holler
2013-07-08  9:12                                                         ` [PATCH 2/2] rtc: rtc-hid-sensor-time: enable HID input processing early Alexander Holler
2013-06-28  1:29                                             ` [rtc-linux] Re: [PATCH 3/9 v2] rtc: rtc-hid-sensor-time: delay registering as rtc into a work Alexander Holler
2013-06-14 16:52                                     ` [PATCH 4/9 RESEND] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-14 17:41                                       ` John Stultz
2013-06-14 18:05                                         ` [rtc-linux] " Alexander Holler
2013-06-14 18:28                                           ` John Stultz
2013-06-15  6:01                                             ` Alexander Holler
2013-06-17 18:10                                               ` John Stultz
2013-06-20 10:15                                                 ` Alexander Holler
2013-06-20 17:27                                                   ` John Stultz
2013-06-20 18:45                                                     ` Alexander Holler
2013-06-20 19:28                                                       ` John Stultz
2013-06-20 23:10                                                         ` Alexander Holler
2013-06-14 16:52                                     ` [PATCH 5/9 v3] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-14 19:24                                       ` John Stultz
2013-06-14 16:52                                     ` [PATCH 6/9 v3] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-14 19:11                                       ` John Stultz
2013-06-22  8:00                                         ` Alexander Holler
2013-06-14 16:52                                     ` [PATCH 7/9] RFC: rtc: implement rtc_read_timeval() Alexander Holler
2013-06-14 17:23                                       ` John Stultz
2013-06-14 17:43                                         ` Alexander Holler
2013-06-14 19:18                                           ` John Stultz
2013-06-14 17:28                                       ` John Stultz
2013-06-14 16:52                                     ` [PATCH 8/9] RFC: rtc: hctosys: support rtc_read_timeval() for high precision clocks Alexander Holler
2013-06-14 19:20                                       ` John Stultz
2013-06-14 16:52                                     ` [PATCH 9/9] RFC: rtc: rtc-hid-sensor-time: add support for rtc_read_timeval() Alexander Holler
2013-06-14 17:27                                     ` [PATCH 0/9 v3] RFC: timekeeping: rtc: change hctosys mechanism John Stultz
2013-06-06 10:51                               ` [PATCH 3/3 v2] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-04  9:38                 ` [PATCH] rtc: rtc-hid-sensor-time: fix possible bug on driver_remove Alexander Holler
2013-06-08  8:56                   ` Alexander Holler
2013-05-05 11:21               ` [PATCH 4/4] rtc: rtc-hid-sensor-time: add support for milliseconds Alexander Holler
2013-04-20 23:46 ` [PATCH 0/3] rtc: rtc-hid-sensor-time Jiri Kosina
2013-04-21  6:38   ` Alexander Holler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1367752887-2927-3-git-send-email-holler@ahsoftware.de \
    --to=holler@ahsoftware.de \
    --cc=a.zummo@towertech.it \
    --cc=akpm@linux-foundation.org \
    --cc=jic23@cam.ac.uk \
    --cc=jkosina@suse.cz \
    --cc=john.stultz@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).