linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Holler <holler@ahsoftware.de>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
	John Stultz <john.stultz@linaro.org>,
	rtc-linux@googlegroups.com, Thomas Gleixner <tglx@linutronix.de>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexander Holler <holler@ahsoftware.de>
Subject: [PATCH 3/9] rtc: rtc-hid-sensor-time: delay registering as rtc into a work
Date: Fri, 14 Jun 2013 18:52:06 +0200	[thread overview]
Message-ID: <1371228732-5749-4-git-send-email-holler@ahsoftware.de> (raw)
In-Reply-To: <1371228732-5749-1-git-send-email-holler@ahsoftware.de>

rtc_device_register() might want to read the clock which doesn't work
before the hid device is registered. Therefor we delay the registration of
the rtc driver by moving it to a work.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
---
 drivers/rtc/rtc-hid-sensor-time.c | 66 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 58 insertions(+), 8 deletions(-)

diff --git a/drivers/rtc/rtc-hid-sensor-time.c b/drivers/rtc/rtc-hid-sensor-time.c
index 7273b01..b842730 100644
--- a/drivers/rtc/rtc-hid-sensor-time.c
+++ b/drivers/rtc/rtc-hid-sensor-time.c
@@ -37,6 +37,11 @@ enum hid_time_channel {
 	TIME_RTC_CHANNEL_MAX,
 };
 
+struct hid_time_workts {
+	struct work_struct work;
+	struct hid_time_state *time_state;
+};
+
 struct hid_time_state {
 	struct hid_sensor_hub_callbacks callbacks;
 	struct hid_sensor_common common_attributes;
@@ -46,6 +51,7 @@ struct hid_time_state {
 	struct completion comp_last_time;
 	struct rtc_time time_buf;
 	struct rtc_device *rtc;
+	struct hid_time_workts *workts;
 };
 
 static const u32 hid_time_addresses[TIME_RTC_CHANNEL_MAX] = {
@@ -237,6 +243,36 @@ static const struct rtc_class_ops hid_time_rtc_ops = {
 	.read_time = hid_rtc_read_time,
 };
 
+static void hid_time_register_rtc_work(struct work_struct *work)
+{
+	struct hid_time_state *time_state =
+		container_of(work, struct hid_time_workts, work)
+			->time_state;
+	struct platform_device *pdev = time_state->callbacks.pdev;
+
+	time_state->rtc = devm_rtc_device_register(&pdev->dev,
+					"hid-sensor-time", &hid_time_rtc_ops,
+					THIS_MODULE);
+	if (IS_ERR_OR_NULL(time_state->rtc)) {
+		struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+		sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TIME);
+		time_state->rtc = NULL;
+		dev_err(&pdev->dev, "rtc device register failed!\n");
+		/*
+		 *  I haven't a found a way to remove only this device from
+		 *  hid-sensor-hub. Removing the device a level above (the
+		 *  complete HID device) doesn't work, because a sensor-hub
+		 *  might provide more than just a time-sensor and thus we
+		 *  would remove all sensors not just this one.
+		 *  So we just leave this driver idling around until I or
+		 *  someone else has figured out how to remove this device
+		 *  from hid-sensor-hub.
+		 */
+	}
+	time_state->workts = NULL;
+	kfree(work);
+}
+
 static int hid_time_probe(struct platform_device *pdev)
 {
 	int ret = 0;
@@ -279,22 +315,36 @@ static int hid_time_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	time_state->rtc = devm_rtc_device_register(&pdev->dev,
-					"hid-sensor-time", &hid_time_rtc_ops,
-					THIS_MODULE);
-
-	if (IS_ERR(time_state->rtc)) {
-		dev_err(&pdev->dev, "rtc device register failed!\n");
-		return PTR_ERR(time_state->rtc);
+	/*
+	 * The HID device has to be registered to read the clock.
+	 * Because rtc_device_register() might read the time, we have to delay
+	 * rtc_device_register() to a work in order to finish the probe before.
+	 */
+	time_state->workts = kmalloc(sizeof(struct hid_time_workts),
+		GFP_KERNEL);
+	if (time_state->workts == NULL) {
+		sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TIME);
+		return -ENOMEM;
 	}
+	time_state->workts->time_state = time_state;
+	INIT_WORK(&time_state->workts->work,
+			hid_time_register_rtc_work);
+	schedule_work(&time_state->workts->work);
 
-	return ret;
+	return 0;
 }
 
 static int hid_time_remove(struct platform_device *pdev)
 {
 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct hid_time_state *time_state = platform_get_drvdata(pdev);
 
+	if (time_state->workts) {
+		flush_work(&time_state->workts->work);
+		WARN_ON(time_state->workts != NULL);
+	}
+	if (time_state->rtc)
+		rtc_device_unregister(time_state->rtc);
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TIME);
 
 	return 0;
-- 
1.8.1.4


  parent reply	other threads:[~2013-06-14 16:53 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-19 15:14 [PATCH 0/3] rtc: rtc-hid-sensor-time Alexander Holler
2013-04-19 15:14 ` [PATCH 1/3 RESEND] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-04-19 15:14 ` [PATCH 2/3] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes Alexander Holler
2013-04-19 15:14 ` [PATCH 3/3] rtc: rtc-hid-sensor-time; add option hctosys to set time at boot Alexander Holler
2013-04-22 23:38   ` Andrew Morton
2013-04-23  8:51     ` Alexander Holler
2013-04-23 10:08       ` Alexander Holler
2013-04-23 10:13         ` Alexander Holler
2013-04-23 10:17           ` Alexander Holler
2013-04-23 15:47             ` Alexander Holler
2013-04-24 21:14               ` Andrew Morton
2013-04-25  6:55                 ` Alexander Holler
2013-05-05 11:21             ` [PATCH 0/4] rtc: rtc-hid-sensor-time: some changes Alexander Holler
2013-05-05 11:21               ` [PATCH 1/4] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-05-05 11:21               ` [PATCH 2/4] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes Alexander Holler
2013-05-05 11:21               ` [PATCH 3/4] rtc: rtc-hid-sensor-time: add option hctosys to set time at boot Alexander Holler
2013-05-21 21:42                 ` Andrew Morton
2013-05-21 22:02                 ` John Stultz
2013-05-21 23:15                   ` Alexander Holler
2013-05-28 19:37                     ` John Stultz
2013-05-29  4:42                       ` Alexander Holler
2013-06-04 13:41                         ` Alexander Holler
2013-06-05 17:15                           ` [PATCH 0/3] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-05 17:15                             ` [PATCH 1/3] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-05 17:15                             ` [PATCH 2/3] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-05 17:15                             ` [PATCH 3/3] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-06 10:51                             ` [PATCH 0/3 v2] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-06 10:51                               ` [PATCH 1/3 RESEND] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-06 10:51                               ` [PATCH 2/3 v2] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-13 19:39                                 ` Alexander Holler
2013-06-14 16:52                                   ` [PATCH 0/9 v3] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-14 16:52                                     ` [PATCH 1/9 RESEND] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-06-14 16:52                                     ` [PATCH 2/9 RESEND] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes Alexander Holler
2013-06-14 16:52                                     ` Alexander Holler [this message]
2013-06-20 10:39                                       ` [PATCH 3/9 v2] rtc: rtc-hid-sensor-time: delay registering as rtc into a work Alexander Holler
2013-06-26 19:55                                         ` Andrew Morton
2013-06-26 21:34                                           ` [rtc-linux] " Alexander Holler
2013-06-26 22:07                                             ` Greg KH
2013-06-26 23:51                                               ` Alexander Holler
2013-07-06  8:55                                                 ` Alexander Holler
2013-07-06 18:21                                                   ` Jiri Kosina
2013-07-07  7:35                                                     ` Alexander Holler
2013-07-08  9:12                                                       ` [PATCH 0/2] rtc: rtc-hid-sensor-time: enable HID input processing early Alexander Holler
2013-07-08  9:12                                                         ` [PATCH 1/2] rtc: rtc-hid-sensor-time: improve error handling when rtc register fails Alexander Holler
2013-07-08  9:12                                                         ` [PATCH 2/2] rtc: rtc-hid-sensor-time: enable HID input processing early Alexander Holler
2013-06-28  1:29                                             ` [rtc-linux] Re: [PATCH 3/9 v2] rtc: rtc-hid-sensor-time: delay registering as rtc into a work Alexander Holler
2013-06-14 16:52                                     ` [PATCH 4/9 RESEND] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-14 17:41                                       ` John Stultz
2013-06-14 18:05                                         ` [rtc-linux] " Alexander Holler
2013-06-14 18:28                                           ` John Stultz
2013-06-15  6:01                                             ` Alexander Holler
2013-06-17 18:10                                               ` John Stultz
2013-06-20 10:15                                                 ` Alexander Holler
2013-06-20 17:27                                                   ` John Stultz
2013-06-20 18:45                                                     ` Alexander Holler
2013-06-20 19:28                                                       ` John Stultz
2013-06-20 23:10                                                         ` Alexander Holler
2013-06-14 16:52                                     ` [PATCH 5/9 v3] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-14 19:24                                       ` John Stultz
2013-06-14 16:52                                     ` [PATCH 6/9 v3] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-14 19:11                                       ` John Stultz
2013-06-22  8:00                                         ` Alexander Holler
2013-06-14 16:52                                     ` [PATCH 7/9] RFC: rtc: implement rtc_read_timeval() Alexander Holler
2013-06-14 17:23                                       ` John Stultz
2013-06-14 17:43                                         ` Alexander Holler
2013-06-14 19:18                                           ` John Stultz
2013-06-14 17:28                                       ` John Stultz
2013-06-14 16:52                                     ` [PATCH 8/9] RFC: rtc: hctosys: support rtc_read_timeval() for high precision clocks Alexander Holler
2013-06-14 19:20                                       ` John Stultz
2013-06-14 16:52                                     ` [PATCH 9/9] RFC: rtc: rtc-hid-sensor-time: add support for rtc_read_timeval() Alexander Holler
2013-06-14 17:27                                     ` [PATCH 0/9 v3] RFC: timekeeping: rtc: change hctosys mechanism John Stultz
2013-06-06 10:51                               ` [PATCH 3/3 v2] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-04  9:38                 ` [PATCH] rtc: rtc-hid-sensor-time: fix possible bug on driver_remove Alexander Holler
2013-06-08  8:56                   ` Alexander Holler
2013-05-05 11:21               ` [PATCH 4/4] rtc: rtc-hid-sensor-time: add support for milliseconds Alexander Holler
2013-04-20 23:46 ` [PATCH 0/3] rtc: rtc-hid-sensor-time Jiri Kosina
2013-04-21  6:38   ` Alexander Holler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371228732-5749-4-git-send-email-holler@ahsoftware.de \
    --to=holler@ahsoftware.de \
    --cc=a.zummo@towertech.it \
    --cc=akpm@linux-foundation.org \
    --cc=john.stultz@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).