From: John Stultz <john.stultz@linaro.org>
To: Alexander Holler <holler@ahsoftware.de>
Cc: linux-kernel@vger.kernel.org, rtc-linux@googlegroups.com,
Andrew Morton <akpm@linux-foundation.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Lars-Peter Clausen <lars@metafoo.de>,
Jonathan Cameron <jic23@cam.ac.uk>, Jiri Kosina <jkosina@suse.cz>
Subject: Re: [PATCH 3/4] rtc: rtc-hid-sensor-time: add option hctosys to set time at boot
Date: Tue, 21 May 2013 15:02:59 -0700 [thread overview]
Message-ID: <519BEF13.2040500@linaro.org> (raw)
In-Reply-To: <1367752887-2927-4-git-send-email-holler@ahsoftware.de>
On 05/05/2013 04:21 AM, Alexander Holler wrote:
> drivers/rtc/hctosys (CONFIG_RTC_HCTOSYS) doesn't work for
> rtc-hid-sensor-time because it will be called in late_init, and thus before
> rtc-hid-sensor-time gets loaded. To set the time through
> rtc-hid-sensor-time at startup, the module now checks by default if the
> system time is before 1970-01-02 and sets the system time (once) if this is
> the case.
>
> To disable this behaviour, set the module option hctosys to zero, e.g. by
> using rtc-hid-sensor-time.hctosys=0 at the kernel command line if the
> driver is statically linked into the kernel.
Sorry I missed this earlier, it fell into my spam box for some reason.
Like Andrew, I think this feels particularly hacky.
Why exactly is late_init too early? (I'm unfamiliar with the
rtc-hid-sensor-time driver)
If this is a hotplug rtc device (why I'm guessing its not available at
late_init), would it not be better to leave the setting of time using
hwclock --hctosys via a udev rule or something?
thanks
-john
next prev parent reply other threads:[~2013-05-21 22:03 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-19 15:14 [PATCH 0/3] rtc: rtc-hid-sensor-time Alexander Holler
2013-04-19 15:14 ` [PATCH 1/3 RESEND] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-04-19 15:14 ` [PATCH 2/3] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes Alexander Holler
2013-04-19 15:14 ` [PATCH 3/3] rtc: rtc-hid-sensor-time; add option hctosys to set time at boot Alexander Holler
2013-04-22 23:38 ` Andrew Morton
2013-04-23 8:51 ` Alexander Holler
2013-04-23 10:08 ` Alexander Holler
2013-04-23 10:13 ` Alexander Holler
2013-04-23 10:17 ` Alexander Holler
2013-04-23 15:47 ` Alexander Holler
2013-04-24 21:14 ` Andrew Morton
2013-04-25 6:55 ` Alexander Holler
2013-05-05 11:21 ` [PATCH 0/4] rtc: rtc-hid-sensor-time: some changes Alexander Holler
2013-05-05 11:21 ` [PATCH 1/4] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-05-05 11:21 ` [PATCH 2/4] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes Alexander Holler
2013-05-05 11:21 ` [PATCH 3/4] rtc: rtc-hid-sensor-time: add option hctosys to set time at boot Alexander Holler
2013-05-21 21:42 ` Andrew Morton
2013-05-21 22:02 ` John Stultz [this message]
2013-05-21 23:15 ` Alexander Holler
2013-05-28 19:37 ` John Stultz
2013-05-29 4:42 ` Alexander Holler
2013-06-04 13:41 ` Alexander Holler
2013-06-05 17:15 ` [PATCH 0/3] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-05 17:15 ` [PATCH 1/3] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-05 17:15 ` [PATCH 2/3] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-05 17:15 ` [PATCH 3/3] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-06 10:51 ` [PATCH 0/3 v2] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-06 10:51 ` [PATCH 1/3 RESEND] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-06 10:51 ` [PATCH 2/3 v2] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-13 19:39 ` Alexander Holler
2013-06-14 16:52 ` [PATCH 0/9 v3] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-14 16:52 ` [PATCH 1/9 RESEND] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-06-14 16:52 ` [PATCH 2/9 RESEND] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes Alexander Holler
2013-06-14 16:52 ` [PATCH 3/9] rtc: rtc-hid-sensor-time: delay registering as rtc into a work Alexander Holler
2013-06-20 10:39 ` [PATCH 3/9 v2] " Alexander Holler
2013-06-26 19:55 ` Andrew Morton
2013-06-26 21:34 ` [rtc-linux] " Alexander Holler
2013-06-26 22:07 ` Greg KH
2013-06-26 23:51 ` Alexander Holler
2013-07-06 8:55 ` Alexander Holler
2013-07-06 18:21 ` Jiri Kosina
2013-07-07 7:35 ` Alexander Holler
2013-07-08 9:12 ` [PATCH 0/2] rtc: rtc-hid-sensor-time: enable HID input processing early Alexander Holler
2013-07-08 9:12 ` [PATCH 1/2] rtc: rtc-hid-sensor-time: improve error handling when rtc register fails Alexander Holler
2013-07-08 9:12 ` [PATCH 2/2] rtc: rtc-hid-sensor-time: enable HID input processing early Alexander Holler
2013-06-28 1:29 ` [rtc-linux] Re: [PATCH 3/9 v2] rtc: rtc-hid-sensor-time: delay registering as rtc into a work Alexander Holler
2013-06-14 16:52 ` [PATCH 4/9 RESEND] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-14 17:41 ` John Stultz
2013-06-14 18:05 ` [rtc-linux] " Alexander Holler
2013-06-14 18:28 ` John Stultz
2013-06-15 6:01 ` Alexander Holler
2013-06-17 18:10 ` John Stultz
2013-06-20 10:15 ` Alexander Holler
2013-06-20 17:27 ` John Stultz
2013-06-20 18:45 ` Alexander Holler
2013-06-20 19:28 ` John Stultz
2013-06-20 23:10 ` Alexander Holler
2013-06-14 16:52 ` [PATCH 5/9 v3] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-14 19:24 ` John Stultz
2013-06-14 16:52 ` [PATCH 6/9 v3] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-14 19:11 ` John Stultz
2013-06-22 8:00 ` Alexander Holler
2013-06-14 16:52 ` [PATCH 7/9] RFC: rtc: implement rtc_read_timeval() Alexander Holler
2013-06-14 17:23 ` John Stultz
2013-06-14 17:43 ` Alexander Holler
2013-06-14 19:18 ` John Stultz
2013-06-14 17:28 ` John Stultz
2013-06-14 16:52 ` [PATCH 8/9] RFC: rtc: hctosys: support rtc_read_timeval() for high precision clocks Alexander Holler
2013-06-14 19:20 ` John Stultz
2013-06-14 16:52 ` [PATCH 9/9] RFC: rtc: rtc-hid-sensor-time: add support for rtc_read_timeval() Alexander Holler
2013-06-14 17:27 ` [PATCH 0/9 v3] RFC: timekeeping: rtc: change hctosys mechanism John Stultz
2013-06-06 10:51 ` [PATCH 3/3 v2] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-04 9:38 ` [PATCH] rtc: rtc-hid-sensor-time: fix possible bug on driver_remove Alexander Holler
2013-06-08 8:56 ` Alexander Holler
2013-05-05 11:21 ` [PATCH 4/4] rtc: rtc-hid-sensor-time: add support for milliseconds Alexander Holler
2013-04-20 23:46 ` [PATCH 0/3] rtc: rtc-hid-sensor-time Jiri Kosina
2013-04-21 6:38 ` Alexander Holler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=519BEF13.2040500@linaro.org \
--to=john.stultz@linaro.org \
--cc=a.zummo@towertech.it \
--cc=akpm@linux-foundation.org \
--cc=holler@ahsoftware.de \
--cc=jic23@cam.ac.uk \
--cc=jkosina@suse.cz \
--cc=lars@metafoo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).