From: Tang Chen <tangchen@cn.fujitsu.com>
To: tglx@linutronix.de, mingo@elte.hu, hpa@zytor.com,
akpm@linux-foundation.org, tj@kernel.org, trenn@suse.de,
yinghai@kernel.org, jiang.liu@huawei.com, wency@cn.fujitsu.com,
laijs@cn.fujitsu.com, isimatu.yasuaki@jp.fujitsu.com,
mgorman@suse.de, minchan@kernel.org, mina86@mina86.com,
gong.chen@linux.intel.com, vasilis.liaskovitis@profitbricks.com,
lwoodman@redhat.com, riel@redhat.com, jweiner@redhat.com,
prarit@redhat.com
Cc: x86@kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
"Rafael J. Wysocki" <rjw@sisk.pl>,
linux-acpi@vger.kernel.org, Tony Luck <tony.luck@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>,
linux-ia64@vger.kernel.org
Subject: [Part1 PATCH v5 17/22] x86, ACPI, numa, ia64: split SLIT handling out
Date: Thu, 13 Jun 2013 21:03:04 +0800 [thread overview]
Message-ID: <1371128589-8953-18-git-send-email-tangchen@cn.fujitsu.com> (raw)
In-Reply-To: <1371128589-8953-1-git-send-email-tangchen@cn.fujitsu.com>
From: Yinghai Lu <yinghai@kernel.org>
We need to handle slit later, as it need to allocate buffer for distance
matrix. Also we do not need SLIT info before init_mem_mapping. So move
SLIT parsing procedure later.
x86_acpi_numa_init() will be splited into x86_acpi_numa_init_srat() and
x86_acpi_numa_init_slit().
It should not break ia64 by replacing acpi_numa_init with
acpi_numa_init_srat/acpi_numa_init_slit/acpi_num_arch_fixup.
-v2: Change name to acpi_numa_init_srat/acpi_numa_init_slit according tj.
remove the reset_numa_distance() in numa_init(), as get we only set
distance in slit handling.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: linux-acpi@vger.kernel.org
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Tested-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com>
Tested-by: Tang Chen <tangchen@cn.fujitsu.com>
---
arch/ia64/kernel/setup.c | 4 +++-
arch/x86/include/asm/acpi.h | 3 ++-
arch/x86/mm/numa.c | 14 ++++++++++++--
arch/x86/mm/srat.c | 11 +++++++----
drivers/acpi/numa.c | 13 +++++++------
include/linux/acpi.h | 3 ++-
6 files changed, 33 insertions(+), 15 deletions(-)
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 13bfdd2..5f7db4a 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -558,7 +558,9 @@ setup_arch (char **cmdline_p)
acpi_table_init();
early_acpi_boot_init();
# ifdef CONFIG_ACPI_NUMA
- acpi_numa_init();
+ acpi_numa_init_srat();
+ acpi_numa_init_slit();
+ acpi_numa_arch_fixup();
# ifdef CONFIG_ACPI_HOTPLUG_CPU
prefill_possible_map();
# endif
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index b31bf97..651db0b 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -178,7 +178,8 @@ static inline void disable_acpi(void) { }
#ifdef CONFIG_ACPI_NUMA
extern int acpi_numa;
-extern int x86_acpi_numa_init(void);
+int x86_acpi_numa_init_srat(void);
+void x86_acpi_numa_init_slit(void);
#endif /* CONFIG_ACPI_NUMA */
#define acpi_unlazy_tlb(x) leave_mm(x)
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 3254f22..630e09f 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -595,7 +595,6 @@ static int __init numa_init(int (*init_func)(void))
nodes_clear(numa_nodes_parsed);
memset(&numa_meminfo, 0, sizeof(numa_meminfo));
- numa_reset_distance();
ret = init_func();
if (ret < 0)
@@ -633,6 +632,10 @@ static int __init dummy_numa_init(void)
return 0;
}
+#ifdef CONFIG_ACPI_NUMA
+static bool srat_used __initdata;
+#endif
+
/**
* x86_numa_init - Initialize NUMA
*
@@ -648,8 +651,10 @@ static void __init early_x86_numa_init(void)
return;
#endif
#ifdef CONFIG_ACPI_NUMA
- if (!numa_init(x86_acpi_numa_init))
+ if (!numa_init(x86_acpi_numa_init_srat)) {
+ srat_used = true;
return;
+ }
#endif
#ifdef CONFIG_AMD_NUMA
if (!numa_init(amd_numa_init))
@@ -667,6 +672,11 @@ void __init x86_numa_init(void)
early_x86_numa_init();
+#ifdef CONFIG_ACPI_NUMA
+ if (srat_used)
+ x86_acpi_numa_init_slit();
+#endif
+
numa_emulation(&numa_meminfo, numa_distance_cnt);
node_possible_map = numa_nodes_parsed;
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index cdd0da9..443f9ef 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -185,14 +185,17 @@ out_err:
return -1;
}
-void __init acpi_numa_arch_fixup(void) {}
-
-int __init x86_acpi_numa_init(void)
+int __init x86_acpi_numa_init_srat(void)
{
int ret;
- ret = acpi_numa_init();
+ ret = acpi_numa_init_srat();
if (ret < 0)
return ret;
return srat_disabled() ? -EINVAL : 0;
}
+
+void __init x86_acpi_numa_init_slit(void)
+{
+ acpi_numa_init_slit();
+}
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index 33e609f..6460db4 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -282,7 +282,7 @@ acpi_table_parse_srat(enum acpi_srat_type id,
handler, max_entries);
}
-int __init acpi_numa_init(void)
+int __init acpi_numa_init_srat(void)
{
int cnt = 0;
@@ -303,11 +303,6 @@ int __init acpi_numa_init(void)
NR_NODE_MEMBLKS);
}
- /* SLIT: System Locality Information Table */
- acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
-
- acpi_numa_arch_fixup();
-
if (cnt < 0)
return cnt;
else if (!parsed_numa_memblks)
@@ -315,6 +310,12 @@ int __init acpi_numa_init(void)
return 0;
}
+void __init acpi_numa_init_slit(void)
+{
+ /* SLIT: System Locality Information Table */
+ acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
+}
+
int acpi_get_pxm(acpi_handle h)
{
unsigned long long pxm;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 4e3731b..92463b5 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -85,7 +85,8 @@ int early_acpi_boot_init(void);
int acpi_boot_init (void);
void acpi_boot_table_init (void);
int acpi_mps_check (void);
-int acpi_numa_init (void);
+int acpi_numa_init_srat(void);
+void acpi_numa_init_slit(void);
int acpi_table_init (void);
int acpi_table_parse(char *id, acpi_tbl_table_handler handler);
--
1.7.1
next prev parent reply other threads:[~2013-06-13 13:31 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-13 13:02 [Part1 PATCH v5 00/22] x86, ACPI, numa: Parse numa info earlier Tang Chen
2013-06-13 13:02 ` [Part1 PATCH v5 01/22] x86: Change get_ramdisk_{image|size}() to global Tang Chen
2013-06-14 21:30 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 02/22] x86, microcode: Use common get_ramdisk_{image|size}() Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] x86, microcode: Use common get_ramdisk_{image|size}( ) tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 03/22] x86, ACPI, mm: Kill max_low_pfn_mapped Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-17 21:04 ` [Part1 PATCH v5 03/22] " Tejun Heo
2013-06-17 21:13 ` Yinghai Lu
2013-06-17 23:08 ` Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 04/22] x86, ACPI: Search buffer above 4GB in a second try for acpi initrd table override Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-17 21:06 ` [Part1 PATCH v5 04/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 05/22] x86, ACPI: Increase acpi initrd override tables number limit Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 06/22] x86, ACPI: Split acpi_initrd_override() into find/copy two steps Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] x86, ACPI: Split acpi_initrd_override() into find/ copy " tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 07/22] x86, ACPI: Store override acpi tables phys addr in cpio files info array Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-17 23:38 ` [Part1 PATCH v5 07/22] " Tejun Heo
2013-06-17 23:40 ` Yinghai Lu
2013-06-17 23:52 ` Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 08/22] x86, ACPI: Make acpi_initrd_override_find work with 32bit flat mode Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 0:07 ` [Part1 PATCH v5 08/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 09/22] x86, ACPI: Find acpi tables in initrd early from head_32.S/head64.c Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 0:33 ` [Part1 PATCH v5 09/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 10/22] x86, mm, numa: Move two functions calling on successful path later Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 0:53 ` [Part1 PATCH v5 10/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 11/22] x86, mm, numa: Call numa_meminfo_cover_memory() checking early Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 1:05 ` [Part1 PATCH v5 11/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 12/22] x86, mm, numa: Move node_map_pfn_alignment() to x86 Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 1:08 ` [Part1 PATCH v5 12/22] " Tejun Heo
2013-06-13 13:03 ` [Part1 PATCH v5 13/22] x86, mm, numa: Use numa_meminfo to check node_map_pfn alignment Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 1:40 ` [Part1 PATCH v5 13/22] " Tejun Heo
2013-06-13 13:03 ` [Part1 PATCH v5 14/22] x86, mm, numa: Set memblock nid later Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 1:45 ` [Part1 PATCH v5 14/22] " Tejun Heo
2013-06-13 13:03 ` [Part1 PATCH v5 15/22] x86, mm, numa: Move node_possible_map setting later Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 16/22] x86, mm, numa: Move numa emulation handling down Tang Chen
2013-06-14 21:33 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 1:58 ` [Part1 PATCH v5 16/22] " Tejun Heo
2013-06-18 6:22 ` Yinghai Lu
2013-06-18 7:13 ` Yinghai Lu
2013-06-19 21:25 ` Yinghai Lu
2013-06-13 13:03 ` Tang Chen [this message]
2013-06-14 21:33 ` [tip:x86/mm] x86, ACPI, numa, ia64: split SLIT handling out tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 18/22] x86, mm, numa: Add early_initmem_init() stub Tang Chen
2013-06-14 21:33 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 19/22] x86, mm: Parse numa info earlier Tang Chen
2013-06-14 21:33 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 20/22] x86, mm: Add comments for step_size shift Tang Chen
2013-06-14 21:33 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 21/22] x86, mm: Make init_mem_mapping be able to be called several times Tang Chen
2013-06-13 18:35 ` Konrad Rzeszutek Wilk
2013-06-13 22:47 ` Yinghai Lu
2013-06-14 5:08 ` Tang Chen
2013-06-14 21:33 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 22/22] x86, mm, numa: Put pagetable on local node ram for 64bit Tang Chen
2013-06-14 21:34 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 2:03 ` [Part1 PATCH v5 00/22] x86, ACPI, numa: Parse numa info earlier Tejun Heo
2013-06-18 5:47 ` Tang Chen
2013-06-18 17:21 ` Tejun Heo
2013-06-20 5:52 ` Tang Chen
2013-06-20 6:17 ` Tejun Heo
2013-06-21 9:19 ` Tang Chen
2013-06-21 18:25 ` Tejun Heo
2013-06-24 3:51 ` Tang Chen
2013-06-24 7:26 ` Tang Chen
2013-06-24 19:59 ` Tejun Heo
2013-06-18 17:10 ` Vasilis Liaskovitis
2013-06-18 20:19 ` Yinghai Lu
2013-06-19 10:05 ` Vasilis Liaskovitis
2013-06-20 18:42 ` Yinghai Lu
2013-06-24 9:40 ` Gu Zheng
2013-06-21 5:19 ` H. Peter Anvin
2013-06-21 6:06 ` Tang Chen
2013-06-21 6:10 ` H. Peter Anvin
2013-06-21 6:20 ` Tang Chen
2013-06-21 6:26 ` Tejun Heo
2013-06-21 20:18 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371128589-8953-18-git-send-email-tangchen@cn.fujitsu.com \
--to=tangchen@cn.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=fenghua.yu@intel.com \
--cc=gong.chen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=jweiner@redhat.com \
--cc=laijs@cn.fujitsu.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lwoodman@redhat.com \
--cc=mgorman@suse.de \
--cc=mina86@mina86.com \
--cc=minchan@kernel.org \
--cc=mingo@elte.hu \
--cc=prarit@redhat.com \
--cc=riel@redhat.com \
--cc=rjw@sisk.pl \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
--cc=tony.luck@intel.com \
--cc=trenn@suse.de \
--cc=vasilis.liaskovitis@profitbricks.com \
--cc=wency@cn.fujitsu.com \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).