linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: tip-bot for Yinghai Lu <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
	yinghai@kernel.org, tangchen@cn.fujitsu.com, tglx@linutronix.de,
	hpa@linux.intel.com
Subject: [tip:x86/mm] x86, mm, numa: Use numa_meminfo to check node_map_pfn alignment
Date: Fri, 14 Jun 2013 14:32:41 -0700	[thread overview]
Message-ID: <tip-052b6965a153de6c46203c574c5ad3161e829898@git.kernel.org> (raw)
In-Reply-To: <1371128589-8953-14-git-send-email-tangchen@cn.fujitsu.com>

Commit-ID:  052b6965a153de6c46203c574c5ad3161e829898
Gitweb:     http://git.kernel.org/tip/052b6965a153de6c46203c574c5ad3161e829898
Author:     Yinghai Lu <yinghai@kernel.org>
AuthorDate: Thu, 13 Jun 2013 21:03:00 +0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Fri, 14 Jun 2013 14:05:00 -0700

x86, mm, numa: Use numa_meminfo to check node_map_pfn alignment

We could use numa_meminfo directly instead of memblock nid in
node_map_pfn_alignment().

So we could do setting memblock nid later and only do it once
for successful path.

-v2: according to tj, separate moving to another patch.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1371128589-8953-14-git-send-email-tangchen@cn.fujitsu.com
Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com>
Tested-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/mm/numa.c | 30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 10c6240..cff565a 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -493,14 +493,18 @@ static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
  * Returns the determined alignment in pfn's.  0 if there is no alignment
  * requirement (single node).
  */
-unsigned long __init node_map_pfn_alignment(void)
+#ifdef NODE_NOT_IN_PAGE_FLAGS
+static unsigned long __init node_map_pfn_alignment(struct numa_meminfo *mi)
 {
 	unsigned long accl_mask = 0, last_end = 0;
 	unsigned long start, end, mask;
 	int last_nid = -1;
 	int i, nid;
 
-	for_each_mem_pfn_range(i, MAX_NUMNODES, &start, &end, &nid) {
+	for (i = 0; i < mi->nr_blks; i++) {
+		start = mi->blk[i].start >> PAGE_SHIFT;
+		end = mi->blk[i].end >> PAGE_SHIFT;
+		nid = mi->blk[i].nid;
 		if (!start || last_nid < 0 || last_nid == nid) {
 			last_nid = nid;
 			last_end = end;
@@ -523,10 +527,16 @@ unsigned long __init node_map_pfn_alignment(void)
 	/* convert mask to number of pages */
 	return ~accl_mask + 1;
 }
+#else
+static unsigned long __init node_map_pfn_alignment(struct numa_meminfo *mi)
+{
+	return 0;
+}
+#endif
 
 static int __init numa_register_memblks(struct numa_meminfo *mi)
 {
-	unsigned long uninitialized_var(pfn_align);
+	unsigned long pfn_align;
 	int i;
 
 	/* Account for nodes with cpus and no memory */
@@ -538,24 +548,22 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 	if (!numa_meminfo_cover_memory(mi))
 		return -EINVAL;
 
-	for (i = 0; i < mi->nr_blks; i++) {
-		struct numa_memblk *mb = &mi->blk[i];
-		memblock_set_node(mb->start, mb->end - mb->start, mb->nid);
-	}
-
 	/*
 	 * If sections array is gonna be used for pfn -> nid mapping, check
 	 * whether its granularity is fine enough.
 	 */
-#ifdef NODE_NOT_IN_PAGE_FLAGS
-	pfn_align = node_map_pfn_alignment();
+	pfn_align = node_map_pfn_alignment(mi);
 	if (pfn_align && pfn_align < PAGES_PER_SECTION) {
 		printk(KERN_WARNING "Node alignment %LuMB < min %LuMB, rejecting NUMA config\n",
 		       PFN_PHYS(pfn_align) >> 20,
 		       PFN_PHYS(PAGES_PER_SECTION) >> 20);
 		return -EINVAL;
 	}
-#endif
+
+	for (i = 0; i < mi->nr_blks; i++) {
+		struct numa_memblk *mb = &mi->blk[i];
+		memblock_set_node(mb->start, mb->end - mb->start, mb->nid);
+	}
 
 	return 0;
 }

  reply	other threads:[~2013-06-14 21:32 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-13 13:02 [Part1 PATCH v5 00/22] x86, ACPI, numa: Parse numa info earlier Tang Chen
2013-06-13 13:02 ` [Part1 PATCH v5 01/22] x86: Change get_ramdisk_{image|size}() to global Tang Chen
2013-06-14 21:30   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 02/22] x86, microcode: Use common get_ramdisk_{image|size}() Tang Chen
2013-06-14 21:31   ` [tip:x86/mm] x86, microcode: Use common get_ramdisk_{image|size}( ) tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 03/22] x86, ACPI, mm: Kill max_low_pfn_mapped Tang Chen
2013-06-14 21:31   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-17 21:04   ` [Part1 PATCH v5 03/22] " Tejun Heo
2013-06-17 21:13     ` Yinghai Lu
2013-06-17 23:08       ` Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 04/22] x86, ACPI: Search buffer above 4GB in a second try for acpi initrd table override Tang Chen
2013-06-14 21:31   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-17 21:06   ` [Part1 PATCH v5 04/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 05/22] x86, ACPI: Increase acpi initrd override tables number limit Tang Chen
2013-06-14 21:31   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 06/22] x86, ACPI: Split acpi_initrd_override() into find/copy two steps Tang Chen
2013-06-14 21:31   ` [tip:x86/mm] x86, ACPI: Split acpi_initrd_override() into find/ copy " tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 07/22] x86, ACPI: Store override acpi tables phys addr in cpio files info array Tang Chen
2013-06-14 21:31   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-17 23:38   ` [Part1 PATCH v5 07/22] " Tejun Heo
2013-06-17 23:40     ` Yinghai Lu
2013-06-17 23:52   ` Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 08/22] x86, ACPI: Make acpi_initrd_override_find work with 32bit flat mode Tang Chen
2013-06-14 21:31   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18  0:07   ` [Part1 PATCH v5 08/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 09/22] x86, ACPI: Find acpi tables in initrd early from head_32.S/head64.c Tang Chen
2013-06-14 21:32   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18  0:33   ` [Part1 PATCH v5 09/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 10/22] x86, mm, numa: Move two functions calling on successful path later Tang Chen
2013-06-14 21:32   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18  0:53   ` [Part1 PATCH v5 10/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 11/22] x86, mm, numa: Call numa_meminfo_cover_memory() checking early Tang Chen
2013-06-14 21:32   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18  1:05   ` [Part1 PATCH v5 11/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 12/22] x86, mm, numa: Move node_map_pfn_alignment() to x86 Tang Chen
2013-06-14 21:32   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18  1:08   ` [Part1 PATCH v5 12/22] " Tejun Heo
2013-06-13 13:03 ` [Part1 PATCH v5 13/22] x86, mm, numa: Use numa_meminfo to check node_map_pfn alignment Tang Chen
2013-06-14 21:32   ` tip-bot for Yinghai Lu [this message]
2013-06-18  1:40   ` Tejun Heo
2013-06-13 13:03 ` [Part1 PATCH v5 14/22] x86, mm, numa: Set memblock nid later Tang Chen
2013-06-14 21:32   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18  1:45   ` [Part1 PATCH v5 14/22] " Tejun Heo
2013-06-13 13:03 ` [Part1 PATCH v5 15/22] x86, mm, numa: Move node_possible_map setting later Tang Chen
2013-06-14 21:32   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 16/22] x86, mm, numa: Move numa emulation handling down Tang Chen
2013-06-14 21:33   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18  1:58   ` [Part1 PATCH v5 16/22] " Tejun Heo
2013-06-18  6:22     ` Yinghai Lu
2013-06-18  7:13       ` Yinghai Lu
2013-06-19 21:25       ` Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 17/22] x86, ACPI, numa, ia64: split SLIT handling out Tang Chen
2013-06-14 21:33   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 18/22] x86, mm, numa: Add early_initmem_init() stub Tang Chen
2013-06-14 21:33   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 19/22] x86, mm: Parse numa info earlier Tang Chen
2013-06-14 21:33   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 20/22] x86, mm: Add comments for step_size shift Tang Chen
2013-06-14 21:33   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 21/22] x86, mm: Make init_mem_mapping be able to be called several times Tang Chen
2013-06-13 18:35   ` Konrad Rzeszutek Wilk
2013-06-13 22:47     ` Yinghai Lu
2013-06-14  5:08       ` Tang Chen
2013-06-14 21:33   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 22/22] x86, mm, numa: Put pagetable on local node ram for 64bit Tang Chen
2013-06-14 21:34   ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18  2:03 ` [Part1 PATCH v5 00/22] x86, ACPI, numa: Parse numa info earlier Tejun Heo
2013-06-18  5:47   ` Tang Chen
2013-06-18 17:21     ` Tejun Heo
2013-06-20  5:52       ` Tang Chen
2013-06-20  6:17         ` Tejun Heo
2013-06-21  9:19           ` Tang Chen
2013-06-21 18:25             ` Tejun Heo
2013-06-24  3:51               ` Tang Chen
2013-06-24  7:26                 ` Tang Chen
2013-06-24 19:59                   ` Tejun Heo
2013-06-18 17:10 ` Vasilis Liaskovitis
2013-06-18 20:19   ` Yinghai Lu
2013-06-19 10:05     ` Vasilis Liaskovitis
2013-06-20 18:42       ` Yinghai Lu
2013-06-24  9:40   ` Gu Zheng
2013-06-21  5:19 ` H. Peter Anvin
2013-06-21  6:06   ` Tang Chen
2013-06-21  6:10     ` H. Peter Anvin
2013-06-21  6:20       ` Tang Chen
2013-06-21  6:26         ` Tejun Heo
2013-06-21 20:18   ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tip-052b6965a153de6c46203c574c5ad3161e829898@git.kernel.org \
    --to=tipbot@zytor.com \
    --cc=hpa@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=tangchen@cn.fujitsu.com \
    --cc=tglx@linutronix.de \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).