From: Yinghai Lu <yinghai@kernel.org>
To: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>,
Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
Tejun Heo <tj@kernel.org>, Thomas Renninger <trenn@suse.de>,
Jiang Liu <jiang.liu@huawei.com>,
Wen Congyang <wency@cn.fujitsu.com>,
Lai Jiangshan <laijs@cn.fujitsu.com>,
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>,
Mel Gorman <mgorman@suse.de>, Minchan Kim <minchan@kernel.org>,
mina86@mina86.com, gong.chen@linux.intel.com,
lwoodman@redhat.com, Rik van Riel <riel@redhat.com>,
jweiner@redhat.com, Prarit Bhargava <prarit@redhat.com>,
"the arch/x86 maintainers" <x86@kernel.org>,
linux-doc@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux MM <linux-mm@kvack.org>
Subject: Re: [Part1 PATCH v5 00/22] x86, ACPI, numa: Parse numa info earlier
Date: Tue, 18 Jun 2013 13:19:12 -0700 [thread overview]
Message-ID: <CAE9FiQW2CMfNOTNM1MRCZo-ZQuQgj=JQtXLZ3eUxF7dQ8qukTA@mail.gmail.com> (raw)
In-Reply-To: <20130618171036.GD4553@dhcp-192-168-178-175.profitbricks.localdomain>
On Tue, Jun 18, 2013 at 10:10 AM, Vasilis Liaskovitis
<vasilis.liaskovitis@profitbricks.com> wrote:
>> could be found at:
>> git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-x86-mm
>>
>> and it is based on today's Linus tree.
>>
>
> Has this patchset been tested on various numa configs?
> I am using linux-next next-20130607 + part1 with qemu/kvm/seabios VMs. The kernel
> boots successfully in many numa configs but while trying different memory sizes
> for a 2 numa node VM, I noticed that booting does not complete in all cases
> (bootup screen appears to hang but there is no output indicating an early panic)
>
> node0 node1 boots
> 1G 1G yes
> 1G 2G yes
> 1G 0.5G yes
> 3G 2.5G yes
> 3G 3G yes
> 4G 0G yes
> 4G 4G yes
> 1.5G 1G no
> 2G 1G no
> 2G 2G no
> 2.5G 2G no
> 2.5G 2.5G no
>
> linux-next next-20130607 boots al of these configs fine.
>
> Looks odd, perhaps I have something wrong in my setup or maybe there is a
> seabios/qemu interaction with this patchset. I will update if I find something.
just tried 2g/2g, and it works on qemu-kvm:
early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel
decompress_kernel:
input: [0x2a8e2c2-0x3393991], output: 0x1000000, heap: [0x339b200-0x33a31ff]
Decompressing Linux... xz... Parsing ELF... done.
Booting the kernel.
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] real_mode_data : phys 0000000000014490
[ 0.000000] real_mode_data : virt ffff880000014490
[ 0.000000] boot_params : init virt ffffffff82f869a0
[ 0.000000] boot_params : phys 0000000002f869a0
[ 0.000000] boot_params : virt ffff880002f869a0
[ 0.000000] boot_command_line : init virt ffffffff82e53020
[ 0.000000] boot_command_line : phys 0000000002e53020
[ 0.000000] boot_command_line : virt ffff880002e53020
[ 0.000000] Kernel Layout:
[ 0.000000] .text: [0x01000000-0x020b8840]
[ 0.000000] .rodata: [0x02200000-0x029d3fff]
[ 0.000000] .data: [0x02a00000-0x02bd4d7f]
[ 0.000000] .init: [0x02bd6000-0x02f71fff]
[ 0.000000] .bss: [0x02f80000-0x03c20fff]
[ 0.000000] .brk: [0x03c21000-0x03c45fff]
[ 0.000000] memblock_reserve: [0x0009f000-0x000fffff] * BIOS reserved
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-rc6-yh-01398-ga6660aa-dirty
(yhlu@linux-siqj.site) (gcc version 4.7.2 20130108 [gcc-4_7-branch
revision 195012] (SUSE Linux) ) #1754 SMP Tue Jun 18 13:10:47 PDT 2013
[ 0.000000] memblock_reserve: [0x01000000-0x03c20fff] TEXT DATA BSS
[ 0.000000] memblock_reserve: [0x7dcef000-0x7fffefff] RAMDISK
[ 0.000000] Command line: BOOT_IMAGE=linux debug ignore_loglevel
initcall_debug pci=routeirq ramdisk_size=262144 root=/dev/ram0 rw
ip=dhcp console=uart8250,io,0x3f8,115200 initrd=initrd.img
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Physical RAM map:
[ 0.000000] raw: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] raw: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] raw: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] raw: [mem 0x0000000000100000-0x00000000dfffdfff] usable
[ 0.000000] raw: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved
[ 0.000000] raw: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] raw: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] raw: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] e820: BIOS-provided physical RAM map (sanitized by setup):
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 [00E0000000-00FFFFFFFF] mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef]
mapped at [ffff8800000fdae0]
[ 0.000000] memblock_reserve: [0x000fdae0-0x000fdaef] * MP-table mpf
[ 0.000000] memblock_reserve: [0x000fdaf0-0x000fdbe3] * MP-table mpc
[ 0.000000] memblock_reserve: [0x03c21000-0x03c26fff] BRK
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0xfff9cc00 reserved size = 0x4f98000
[ 0.000000] memory.cnt = 0x3
[ 0.000000] memory[0x0] [0x00001000-0x0009efff], 0x9e000 bytes
[ 0.000000] memory[0x1] [0x00100000-0xdfffdfff], 0xdfefe000 bytes
[ 0.000000] memory[0x2] [0x100000000-0x11fffffff], 0x20000000 bytes
[ 0.000000] reserved.cnt = 0x3
[ 0.000000] reserved[0x0] [0x0009f000-0x000fffff], 0x61000 bytes
[ 0.000000] reserved[0x1] [0x01000000-0x03c26fff], 0x2c27000 bytes
[ 0.000000] reserved[0x2] [0x7dcef000-0x7fffefff], 0x2310000 bytes
[ 0.000000] memblock_reserve: [0x00099000-0x0009efff] TRAMPOLINE
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] memblock_reserve: [0x00000000-0x0000ffff] RESERVELOW
[ 0.000000] ACPI: RSDP 00000000000fd8d0 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 00000000dfffe270 00038 (v01 BOCHS BXPCRSDT
00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 00000000dfffff80 00074 (v01 BOCHS BXPCFACP
00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 00000000dfffe2b0 011A9 (v01 BXPC BXDSDT
00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dfffff40 00040
[ 0.000000] ACPI: SSDT 00000000dffff6e0 00858 (v01 BOCHS BXPCSSDT
00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 00000000dffff5b0 00090 (v01 BOCHS BXPCAPIC
00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 00000000dffff570 00038 (v01 BOCHS BXPCHPET
00000001 BXPC 00000001)
[ 0.000000] ACPI: SRAT 00000000dffff460 00110 (v01 BOCHS BXPCSRAT
00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x80000000-0xdfffffff]
[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x100000000-0x11fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem
0x00100000-0x7fffffff] -> [mem 0x00000000-0x7fffffff]
[ 0.000000] NUMA: Node 1 [mem 0x80000000-0xdfffffff] + [mem
0x100000000-0x11fffffff] -> [mem 0x80000000-0x11fffffff]
[ 0.000000] Node 0: [mem 0x00000000000000-0x0000007fffffff]
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x03c22000, 0x03c22fff] PGTABLE
[ 0.000000] BRK [0x03c23000, 0x03c23fff] PGTABLE
[ 0.000000] BRK [0x03c24000, 0x03c24fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7da00000-0x7dbfffff]
[ 0.000000] [mem 0x7da00000-0x7dbfffff] page 2M
[ 0.000000] BRK [0x03c25000, 0x03c25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7d9fffff]
[ 0.000000] [mem 0x7c000000-0x7d9fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7dc00000-0x7fffffff]
[ 0.000000] [mem 0x7dc00000-0x7fffffff] page 2M
[ 0.000000] Node 1: [mem 0x00000080000000-0x0000011fffffff]
[ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
[ 0.000000] [mem 0x11fe00000-0x11fffffff] page 2M
[ 0.000000] BRK [0x03c26000, 0x03c26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff]
[ 0.000000] [mem 0x11c000000-0x11fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x80000000-0xdfffdfff]
[ 0.000000] [mem 0x80000000-0xdfdfffff] page 2M
[ 0.000000] [mem 0xdfe00000-0xdfffdfff] page 4k
[ 0.000000] memblock_reserve: [0x11ffff000-0x11fffffff] PGTABLE
[ 0.000000] memblock_reserve: [0x11fffe000-0x11fffefff] PGTABLE
[ 0.000000] memblock_reserve: [0x11fffd000-0x11fffdfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7dcef000-0x7fffefff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fffffff]
[ 0.000000] memblock_reserve: [0x7dcc8000-0x7dceefff]
[ 0.000000] NODE_DATA [mem 0x7dcc8000-0x7dceefff]
[ 0.000000] Initmem setup node 1 [mem 0x80000000-0x11fffffff]
[ 0.000000] memblock_reserve: [0x11ffd6000-0x11fffcfff]
[ 0.000000] NODE_DATA [mem 0x11ffd6000-0x11fffcfff]
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0xfff9cc00 reserved size = 0x4fff000
[ 0.000000] memory.cnt = 0x4
[ 0.000000] memory[0x0] [0x00001000-0x0009efff], 0x9e000 bytes on node 0
[ 0.000000] memory[0x1] [0x00100000-0x7fffffff], 0x7ff00000
bytes on node 0
[ 0.000000] memory[0x2] [0x80000000-0xdfffdfff], 0x5fffe000
bytes on node 1
[ 0.000000] memory[0x3] [0x100000000-0x11fffffff], 0x20000000
bytes on node 1
[ 0.000000] reserved.cnt = 0x5
[ 0.000000] reserved[0x0] [0x00000000-0x0000ffff], 0x10000 bytes
[ 0.000000] reserved[0x1] [0x00099000-0x000fffff], 0x67000 bytes
[ 0.000000] reserved[0x2] [0x01000000-0x03c26fff], 0x2c27000 bytes
[ 0.000000] reserved[0x3] [0x7dcc8000-0x7fffefff], 0x2337000 bytes
[ 0.000000] reserved[0x4] [0x11ffd6000-0x11fffffff], 0x2a000 bytes
[ 0.000000] memblock_reserve: [0x7ffff000-0x7fffffff] sparse section
[ 0.000000] memblock_reserve: [0x11fbd6000-0x11ffd5fff] usemap_map
[ 0.000000] memblock_reserve: [0x7dcc7e00-0x7dcc7fff] usemap section
[ 0.000000] memblock_reserve: [0x11fbd5e00-0x11fbd5fff] usemap section
[ 0.000000] memblock_reserve: [0x11f7d5e00-0x11fbd5dff] map_map
[ 0.000000] memblock_reserve: [0x7bc00000-0x7dbfffff] vmemmap buf
[ 0.000000] memblock_reserve: [0x7dcc6000-0x7dcc6fff] vmemmap block
[ 0.000000] [ffffea0000000000-ffffea7fffffffff] PGD @
ffff88007dcc6000 on node 0
[ 0.000000] memblock_reserve: [0x7dcc5000-0x7dcc5fff] vmemmap block
[ 0.000000] [ffffea0000000000-ffffea003fffffff] PUD @
ffff88007dcc5000 on node 0
[ 0.000000] memblock_free: [0x7dc00000-0x7dbfffff]
[ 0.000000] memblock_reserve: [0x11d600000-0x11f5fffff] vmemmap buf
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD ->
[ffff88007bc00000-ffff88007dbfffff] on node 0
[ 0.000000] memblock_free: [0x11f600000-0x11f5fffff]
[ 0.000000] [ffffea0002000000-ffffea00047fffff] PMD ->
[ffff88011d600000-ffff88011f5fffff] on node 1
[ 0.000000] memblock_free: [0x11f7d5e00-0x11fbd5dff]
[ 0.000000] memblock_free: [0x11fbd6000-0x11ffd5fff]Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7fffffff]
[ 0.000000] node 1: [mem 0x80000000-0xdfffdfff]
[ 0.000000] node 1: [mem 0x100000000-0x11fffffff]
[ 0.000000] start - node_states[2]:
[ 0.000000] On node 0 totalpages: 524190
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] memblock_reserve: [0x7dc6d000-0x7dcc4fff] pgdat
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520192 pages, LIFO batch:31
[ 0.000000] memblock_reserve: [0x7dc15000-0x7dc6cfff] pgdat
[ 0.000000] On node 1 totalpages: 524286
[ 0.000000] DMA32 zone: 6144 pages used for memmap
[ 0.000000] DMA32 zone: 393214 pages, LIFO batch:31
[ 0.000000] memblock_reserve: [0x11ff7e000-0x11ffd5fff] pgdat
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] memblock_reserve: [0x11ff26000-0x11ff7dfff] pgdat
[ 0.000000] after - node_states[2]: 0-1
[ 0.000000] memblock_reserve: [0x11ff25000-0x11ff25fff] pgtable
next prev parent reply other threads:[~2013-06-18 20:19 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-13 13:02 [Part1 PATCH v5 00/22] x86, ACPI, numa: Parse numa info earlier Tang Chen
2013-06-13 13:02 ` [Part1 PATCH v5 01/22] x86: Change get_ramdisk_{image|size}() to global Tang Chen
2013-06-14 21:30 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 02/22] x86, microcode: Use common get_ramdisk_{image|size}() Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] x86, microcode: Use common get_ramdisk_{image|size}( ) tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 03/22] x86, ACPI, mm: Kill max_low_pfn_mapped Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-17 21:04 ` [Part1 PATCH v5 03/22] " Tejun Heo
2013-06-17 21:13 ` Yinghai Lu
2013-06-17 23:08 ` Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 04/22] x86, ACPI: Search buffer above 4GB in a second try for acpi initrd table override Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-17 21:06 ` [Part1 PATCH v5 04/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 05/22] x86, ACPI: Increase acpi initrd override tables number limit Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 06/22] x86, ACPI: Split acpi_initrd_override() into find/copy two steps Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] x86, ACPI: Split acpi_initrd_override() into find/ copy " tip-bot for Yinghai Lu
2013-06-13 13:02 ` [Part1 PATCH v5 07/22] x86, ACPI: Store override acpi tables phys addr in cpio files info array Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-17 23:38 ` [Part1 PATCH v5 07/22] " Tejun Heo
2013-06-17 23:40 ` Yinghai Lu
2013-06-17 23:52 ` Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 08/22] x86, ACPI: Make acpi_initrd_override_find work with 32bit flat mode Tang Chen
2013-06-14 21:31 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 0:07 ` [Part1 PATCH v5 08/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 09/22] x86, ACPI: Find acpi tables in initrd early from head_32.S/head64.c Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 0:33 ` [Part1 PATCH v5 09/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 10/22] x86, mm, numa: Move two functions calling on successful path later Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 0:53 ` [Part1 PATCH v5 10/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 11/22] x86, mm, numa: Call numa_meminfo_cover_memory() checking early Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 1:05 ` [Part1 PATCH v5 11/22] " Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 12/22] x86, mm, numa: Move node_map_pfn_alignment() to x86 Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 1:08 ` [Part1 PATCH v5 12/22] " Tejun Heo
2013-06-13 13:03 ` [Part1 PATCH v5 13/22] x86, mm, numa: Use numa_meminfo to check node_map_pfn alignment Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 1:40 ` [Part1 PATCH v5 13/22] " Tejun Heo
2013-06-13 13:03 ` [Part1 PATCH v5 14/22] x86, mm, numa: Set memblock nid later Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 1:45 ` [Part1 PATCH v5 14/22] " Tejun Heo
2013-06-13 13:03 ` [Part1 PATCH v5 15/22] x86, mm, numa: Move node_possible_map setting later Tang Chen
2013-06-14 21:32 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 16/22] x86, mm, numa: Move numa emulation handling down Tang Chen
2013-06-14 21:33 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 1:58 ` [Part1 PATCH v5 16/22] " Tejun Heo
2013-06-18 6:22 ` Yinghai Lu
2013-06-18 7:13 ` Yinghai Lu
2013-06-19 21:25 ` Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 17/22] x86, ACPI, numa, ia64: split SLIT handling out Tang Chen
2013-06-14 21:33 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 18/22] x86, mm, numa: Add early_initmem_init() stub Tang Chen
2013-06-14 21:33 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 19/22] x86, mm: Parse numa info earlier Tang Chen
2013-06-14 21:33 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 20/22] x86, mm: Add comments for step_size shift Tang Chen
2013-06-14 21:33 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 21/22] x86, mm: Make init_mem_mapping be able to be called several times Tang Chen
2013-06-13 18:35 ` Konrad Rzeszutek Wilk
2013-06-13 22:47 ` Yinghai Lu
2013-06-14 5:08 ` Tang Chen
2013-06-14 21:33 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-13 13:03 ` [Part1 PATCH v5 22/22] x86, mm, numa: Put pagetable on local node ram for 64bit Tang Chen
2013-06-14 21:34 ` [tip:x86/mm] " tip-bot for Yinghai Lu
2013-06-18 2:03 ` [Part1 PATCH v5 00/22] x86, ACPI, numa: Parse numa info earlier Tejun Heo
2013-06-18 5:47 ` Tang Chen
2013-06-18 17:21 ` Tejun Heo
2013-06-20 5:52 ` Tang Chen
2013-06-20 6:17 ` Tejun Heo
2013-06-21 9:19 ` Tang Chen
2013-06-21 18:25 ` Tejun Heo
2013-06-24 3:51 ` Tang Chen
2013-06-24 7:26 ` Tang Chen
2013-06-24 19:59 ` Tejun Heo
2013-06-18 17:10 ` Vasilis Liaskovitis
2013-06-18 20:19 ` Yinghai Lu [this message]
2013-06-19 10:05 ` Vasilis Liaskovitis
2013-06-20 18:42 ` Yinghai Lu
2013-06-24 9:40 ` Gu Zheng
2013-06-21 5:19 ` H. Peter Anvin
2013-06-21 6:06 ` Tang Chen
2013-06-21 6:10 ` H. Peter Anvin
2013-06-21 6:20 ` Tang Chen
2013-06-21 6:26 ` Tejun Heo
2013-06-21 20:18 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAE9FiQW2CMfNOTNM1MRCZo-ZQuQgj=JQtXLZ3eUxF7dQ8qukTA@mail.gmail.com' \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=gong.chen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=jweiner@redhat.com \
--cc=laijs@cn.fujitsu.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lwoodman@redhat.com \
--cc=mgorman@suse.de \
--cc=mina86@mina86.com \
--cc=minchan@kernel.org \
--cc=mingo@elte.hu \
--cc=prarit@redhat.com \
--cc=riel@redhat.com \
--cc=tangchen@cn.fujitsu.com \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
--cc=trenn@suse.de \
--cc=vasilis.liaskovitis@profitbricks.com \
--cc=wency@cn.fujitsu.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).