From: Hayes Wang <hayeswang@realtek.com> To: <netdev@vger.kernel.org> Cc: <nic_swsd@realtek.com>, <linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>, <pmalani@chromium.org>, <grundler@chromium.org>, Hayes Wang <hayeswang@realtek.com> Subject: [PATCH net v3 2/9] r8152: reset flow control patch when linking on for RTL8153B Date: Wed, 22 Jan 2020 16:02:06 +0800 [thread overview] Message-ID: <1394712342-15778-360-Taiwan-albertk@realtek.com> (raw) In-Reply-To: <1394712342-15778-358-Taiwan-albertk@realtek.com> When linking ON, the patch of flow control has to be reset. This makes sure the patch works normally. Signed-off-by: Hayes Wang <hayeswang@realtek.com> --- drivers/net/usb/r8152.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 115559707683..504db2348a3e 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2865,6 +2865,17 @@ static int rtl8153_enable(struct r8152 *tp) r8153_set_rx_early_timeout(tp); r8153_set_rx_early_size(tp); + if (tp->version == RTL_VER_09) { + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK); + ocp_data &= ~FC_PATCH_TASK; + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); + usleep_range(1000, 2000); + ocp_data |= FC_PATCH_TASK; + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); + } + return rtl_enable(tp); } -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Hayes Wang <hayeswang@realtek.com> To: <kuba@kernel.org>, <davem@davemloft.net> Cc: <netdev@vger.kernel.org>, <nic_swsd@realtek.com>, <linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>, Hayes Wang <hayeswang@realtek.com> Subject: [PATCH net-next 1/2] r8152: remove NCM mode from REALTEK_USB_DEVICE macro Date: Fri, 23 Apr 2021 17:44:54 +0800 [thread overview] Message-ID: <1394712342-15778-360-Taiwan-albertk@realtek.com> (raw) Message-ID: <20210423094454.2ezPw_VysMhtNeQakFlEJuD1GVAc3NIZnmKQBHYOWQM@z> (raw) In-Reply-To: <1394712342-15778-359-Taiwan-albertk@realtek.com> The RTL8156 support CDC NCM mode. And users could set the configuration of the USB device between vendor and NCM mode dynamically by themselves. That is, the driver doesn't need to set vendor mode from NCM mode. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> --- drivers/net/usb/r8152.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 5b4ed69df64f..47198c125719 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -9593,15 +9593,6 @@ static void rtl8152_disconnect(struct usb_interface *intf) .idProduct = (prod), \ .bInterfaceClass = USB_CLASS_COMM, \ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ - .bInterfaceProtocol = USB_CDC_PROTO_NONE \ -}, \ -{ \ - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \ - USB_DEVICE_ID_MATCH_DEVICE, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = USB_CLASS_COMM, \ - .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, \ .bInterfaceProtocol = USB_CDC_PROTO_NONE /* table of devices that work with this driver */ -- 2.26.3
next prev parent reply other threads:[~2020-01-22 8:03 UTC|newest] Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-21 12:40 [PATCH net 0/9] r8152: serial fixes Hayes Wang 2020-01-21 12:40 ` [PATCH net 1/9] r8152: fix runtime resume for linking change Hayes Wang 2020-01-22 9:47 ` Sergei Shtylyov 2020-01-21 12:40 ` [PATCH net 2/9] r8152: reset flow control patch when linking on for RTL8153B Hayes Wang 2020-01-21 12:54 ` David Miller 2020-01-21 13:01 ` Joe Perches 2020-01-21 13:19 ` Hayes Wang 2020-01-21 12:40 ` [PATCH net 3/9] r8152: get default setting of WOL before initializing Hayes Wang 2021-02-19 9:04 ` [PATCH net-next 0/4] r8152: minor adjustments Hayes Wang 2021-02-23 20:40 ` patchwork-bot+netdevbpf 2020-01-21 12:40 ` [PATCH net 4/9] r8152: disable U2P3 for RTL8153B Hayes Wang 2021-02-19 9:04 ` [PATCH net-next 1/4] r8152: enable U1/U2 for USB_SPEED_SUPER Hayes Wang 2020-01-21 12:40 ` [PATCH net 5/9] r8152: Disable PLA MCU clock speed down Hayes Wang 2021-02-19 9:04 ` [PATCH net-next 2/4] r8152: check if the pointer of the function exists Hayes Wang 2020-01-21 12:40 ` [PATCH net 6/9] r8152: disable test IO for RTL8153B Hayes Wang 2021-02-19 9:04 ` [PATCH net-next 3/4] r8152: replace netif_err with dev_err Hayes Wang 2020-01-21 12:40 ` [PATCH net 7/9] r8152: don't enable U1U2 with USB_SPEED_HIGH for RTL8153B Hayes Wang 2021-02-19 9:04 ` [PATCH net-next 4/4] r8152: spilt rtl_set_eee_plus and r8153b_green_en Hayes Wang 2020-01-21 12:40 ` [PATCH net 8/9] r8152: avoid the MCU to clear the lanwake Hayes Wang 2021-02-19 9:38 ` [PATCH net] r8152: move r8153_mac_clk_spd Hayes Wang 2021-02-19 18:22 ` Jakub Kicinski 2021-02-22 6:19 ` Hayes Wang 2020-01-21 12:40 ` [PATCH net 9/9] r8152: disable DelayPhyPwrChg Hayes Wang 2020-01-22 7:02 ` Grant Grundler 2020-01-22 7:50 ` Hayes Wang 2021-03-03 8:39 ` [PATCH net] Revert "r8152: adjust the settings about MAC clock speed down for RTL8153" Hayes Wang 2021-03-04 1:00 ` patchwork-bot+netdevbpf 2020-01-22 1:41 ` [PATCH net v2 0/9] r8152: serial fixes Hayes Wang 2020-01-22 1:41 ` [PATCH net v2 1/9] r8152: fix runtime resume for linking change Hayes Wang 2021-03-19 7:37 ` [PATCH net] r8152: limit the RX buffer size of RTL8153A for USB 2.0 Hayes Wang 2020-01-22 1:41 ` [PATCH net v2 2/9] r8152: reset flow control patch when linking on for RTL8153B Hayes Wang 2021-04-16 8:04 ` [PATCH net-next 0/6] r8152: support new chips Hayes Wang 2021-04-16 22:40 ` patchwork-bot+netdevbpf 2020-01-22 1:41 ` [PATCH net v2 3/9] r8152: get default setting of WOL before initializing Hayes Wang 2021-04-16 8:04 ` [PATCH net-next 1/6] r8152: set inter fram gap time depending on speed Hayes Wang 2020-01-22 1:41 ` [PATCH net v2 4/9] r8152: disable U2P3 for RTL8153B Hayes Wang 2021-04-16 8:04 ` [PATCH net-next 2/6] r8152: adjust rtl8152_check_firmware function Hayes Wang 2020-01-22 1:41 ` [PATCH net v2 5/9] r8152: Disable PLA MCU clock speed down Hayes Wang 2021-04-16 8:04 ` [PATCH net-next 3/6] r8152: add help function to change mtu Hayes Wang 2020-01-22 1:41 ` [PATCH net v2 6/9] r8152: disable test IO for RTL8153B Hayes Wang 2021-04-16 8:04 ` [PATCH net-next 4/6] r8152: support new chips Hayes Wang 2021-04-16 21:50 ` Jakub Kicinski 2021-04-20 7:00 ` Hayes Wang 2021-04-20 18:34 ` Jakub Kicinski 2021-04-21 2:23 ` Hayes Wang 2020-01-22 1:41 ` [PATCH net v2 7/9] r8152: don't enable U1U2 with USB_SPEED_HIGH for RTL8153B Hayes Wang 2021-04-16 8:04 ` [PATCH net-next 5/6] r8152: support PHY firmware for RTL8156 series Hayes Wang 2020-01-22 1:41 ` [PATCH net v2 8/9] r8152: avoid the MCU to clear the lanwake Hayes Wang 2021-04-16 8:04 ` [PATCH net-next 6/6] r8152: search the configuration of vendor mode Hayes Wang 2020-01-22 1:41 ` [PATCH net v2 9/9] r8152: disable DelayPhyPwrChg Hayes Wang 2021-03-05 9:34 ` [PATCH net] r8169: fix r8168fp_adjust_ocp_cmd function Hayes Wang 2021-03-05 11:48 ` Heiner Kallweit 2021-03-05 21:10 ` patchwork-bot+netdevbpf 2020-01-22 8:02 ` [PATCH net v3 0/9] r8152: serial fixes Hayes Wang 2020-01-22 8:02 ` [PATCH net v3 1/9] r8152: fix runtime resume for linking change Hayes Wang 2021-04-23 9:44 ` [PATCH net-next 0/2] r8152: adjust REALTEK_USB_DEVICE Hayes Wang 2021-04-23 21:00 ` patchwork-bot+netdevbpf 2020-01-22 8:02 ` Hayes Wang [this message] 2021-04-23 9:44 ` [PATCH net-next 1/2] r8152: remove NCM mode from REALTEK_USB_DEVICE macro Hayes Wang 2020-01-22 8:02 ` [PATCH net v3 3/9] r8152: get default setting of WOL before initializing Hayes Wang 2021-04-23 9:44 ` [PATCH net-next 2/2] r8152: redefine REALTEK_USB_DEVICE macro Hayes Wang 2020-01-22 8:02 ` [PATCH net v3 4/9] r8152: disable U2P3 for RTL8153B Hayes Wang 2021-04-24 6:09 ` [PATCH net-next] r8152: remove some bit operations Hayes Wang 2021-04-26 1:30 ` patchwork-bot+netdevbpf 2020-01-22 8:02 ` [PATCH net v3 5/9] r8152: Disable PLA MCU clock speed down Hayes Wang 2021-05-21 9:07 ` [PATCH net] r8152: check the informaton of the device Hayes Wang 2021-05-21 9:42 ` Greg KH 2021-05-22 3:13 ` Hayes Wang 2020-01-22 8:02 ` [PATCH net v3 6/9] r8152: disable test IO for RTL8153B Hayes Wang 2021-05-22 5:24 ` [PATCH net v2] r8152: check the informaton of the device Hayes Wang 2021-05-22 7:32 ` Greg KH 2021-05-22 8:07 ` Johan Hovold 2021-05-24 1:49 ` Hayes Wang 2021-05-24 7:44 ` Johan Hovold 2020-01-22 8:02 ` [PATCH net v3 7/9] r8152: don't enable U1U2 with USB_SPEED_HIGH for RTL8153B Hayes Wang 2021-05-24 6:49 ` [PATCH net v3] r8152: check the informaton of the device Hayes Wang 2021-05-24 8:00 ` Johan Hovold 2021-05-24 8:54 ` Hayes Wang 2021-05-24 9:13 ` Johan Hovold 2021-05-24 20:20 ` patchwork-bot+netdevbpf 2020-01-22 8:02 ` [PATCH net v3 8/9] r8152: avoid the MCU to clear the lanwake Hayes Wang 2021-06-01 7:37 ` [PATCH net-next] r8152: support pauseparam of ethtool_ops Hayes Wang 2021-06-01 22:30 ` patchwork-bot+netdevbpf 2020-01-22 8:02 ` [PATCH net v3 9/9] r8152: disable DelayPhyPwrChg Hayes Wang 2021-06-17 10:00 ` [PATCH net-next] r8152: store the information of the pipes Hayes Wang 2021-06-17 19:20 ` patchwork-bot+netdevbpf 2020-01-23 10:21 ` [PATCH net v3 0/9] r8152: serial fixes David Miller 2021-04-22 8:48 ` [PATCH net-next] r8152: replace return with break for ram code speedup mode timeout Hayes Wang 2021-04-22 21:20 ` patchwork-bot+netdevbpf
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1394712342-15778-360-Taiwan-albertk@realtek.com \ --to=hayeswang@realtek.com \ --cc=grundler@chromium.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=netdev@vger.kernel.org \ --cc=nic_swsd@realtek.com \ --cc=pmalani@chromium.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).