From: Chanwoo Choi <cw00.choi@samsung.com>
To: kgene@kernel.org
Cc: mark.rutland@arm.com, marc.zyngier@arm.com, arnd@arndb.de,
olof@lixom.net, catalin.marinas@arm.com, will.deacon@arm.com,
inki.dae@samsung.com, chanho61.park@samsung.com,
sw0312.kim@samsung.com, jh80.chung@samsung.com,
ideal.song@samsung.com, cw00.choi@samsung.com,
a.kesavan@samsung.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 9/9] arm64: dts: exynos: Add thermal-zones dt node for Exynos5433 SoC
Date: Tue, 10 Mar 2015 10:57:35 +0900 [thread overview]
Message-ID: <1425952655-21654-10-git-send-email-cw00.choi@samsung.com> (raw)
In-Reply-To: <1425952655-21654-1-git-send-email-cw00.choi@samsung.com>
This patch adds the thermal-zones devicetree node for Exynos5433 SoC.
The thermal-zones has five thermal-zones and then each thermal-zone contains
each thermal-sensor to monitor the temperature of own IP. The {atlas0|apollo}_
thermal zone have the eight trip-points for interrupt method to detect the
over-temperature.
Cc: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++++++++++++++++++++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1 +
2 files changed, 232 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
new file mode 100644
index 0000000..7ff7b0e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
@@ -0,0 +1,231 @@
+/*
+ * Device tree sources for Exynos5433 thermal zone
+ *
+ * Copyright (c) 2015 Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+ atlas0_thermal: atlas0-thermal {
+ thermal-sensors = <&tmu_atlas0>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ atlas0_alert_0: atlas0-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_1: atlas0-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_2: atlas0-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_3: atlas0-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_4: atlas0-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_5: atlas0-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_6: atlas0-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+
+ atlas1_thermal: atlas1-thermal {
+ thermal-sensors = <&tmu_atlas1>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ atlas1_alert_0: atlas1-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_1: atlas1-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_2: atlas1-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_3: atlas1-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_4: atlas1-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_5: atlas1-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_6: atlas1-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+
+ g3d_thermal: g3d-thermal {
+ thermal-sensors = <&tmu_g3d>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ g3d_alert_0: g3d-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_1: g3d-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_2: g3d-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_3: g3d-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_4: g3d-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_5: g3d-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_6: g3d-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ };
+
+ };
+
+ apollo_thermal: apollo-thermal {
+ thermal-sensors = <&tmu_apollo>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ apollo_alert_0: apollo-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_1: apollo-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_2: apollo-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_3: apollo-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_4: apollo-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_5: apollo-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_6: apollo-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+
+ isp_thermal: isp-thermal {
+ thermal-sensors = <&tmu_isp>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ isp_alert_0: isp-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_1: isp-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_2: isp-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_3: isp-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_4: isp-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_5: isp-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_6: isp-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 22f36f5..6a81a4f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -928,3 +928,4 @@
};
#include "exynos5433-pinctrl.dtsi"
+#include "exynos5433-tmu.dtsi"
--
1.8.5.5
next prev parent reply other threads:[~2015-03-10 1:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-10 1:57 [PATCH v6 0/9] arm64: Add the support for new Exynos5433 SoC Chanwoo Choi
2015-03-10 1:57 ` [PATCHv v6 1/9] arm64: dts: exynos: Add dts files for 64-bit " Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 2/9] arm64: dts: exynos: Add MSHC dt node for Exynos5433 Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 3/9] arm64: dts: exynos: Add SPI/PDMA " Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 4/9] arm64: dts: exynos: Add PMU " Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 5/9] arm64: dts: exynos: Add RTC and ADC dt node for Exynos5433 SoC Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 6/9] arm64: dts: exynos: Add ADMA " Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 7/9] arm64: dts: exynos: Add I2S " Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 8/9] arm64: dts: exynos: Add TMU sensor " Chanwoo Choi
2015-03-10 1:57 ` Chanwoo Choi [this message]
2015-03-16 5:04 ` [PATCH v6 0/9] arm64: Add the support for new " Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425952655-21654-10-git-send-email-cw00.choi@samsung.com \
--to=cw00.choi@samsung.com \
--cc=a.kesavan@samsung.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=chanho61.park@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=ideal.song@samsung.com \
--cc=inki.dae@samsung.com \
--cc=jh80.chung@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=sw0312.kim@samsung.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).