From: Chanwoo Choi <cw00.choi@samsung.com>
To: Chanwoo Choi <cw00.choi@samsung.com>
Cc: kgene@kernel.org, mark.rutland@arm.com, marc.zyngier@arm.com,
arnd@arndb.de, olof@lixom.net, catalin.marinas@arm.com,
will.deacon@arm.com, inki.dae@samsung.com,
chanho61.park@samsung.com, sw0312.kim@samsung.com,
jh80.chung@samsung.com, ideal.song@samsung.com,
a.kesavan@samsung.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 0/9] arm64: Add the support for new Exynos5433 SoC
Date: Mon, 16 Mar 2015 14:04:38 +0900 [thread overview]
Message-ID: <55066466.90502@samsung.com> (raw)
In-Reply-To: <1425952655-21654-1-git-send-email-cw00.choi@samsung.com>
Dear Kukjin,
Gently Ping!
Best Regards
Chanwoo Choi
On 03/10/2015 10:57 AM, Chanwoo Choi wrote:
> This patchset adds new 64-bit Exynos5433 Samsung SoC which contains quad
> Cortex-A57 and quad Cortex-A53. It is desigend with the 20nm low power process.
>
> Depends on:
> - This patch-set has the dependency on following four patch-set.
> The Exynos5433 clock controller patch-set[1][2] was merged by Michael Turquette.
> and Exynos5433's pinctrl patch[3] was merged by Linus Walleij. Exynos5433's TMU
> patch[4] will be refactoring without feature update.
>
> [1] [PATCH v5 00/13] clk: samsung: Add the support for exynos5433 clocks
> - https://lkml.org/lkml/2015/2/2/368
> [2] [PATCH v3 0/9] clk: samsung: Add clocks for remaining domains of Exynos5433
> - https://lkml.org/lkml/2015/2/2/784
> [3] [PATCH v4] pinctrl: exynos: Add support for Exynos5433
> - https://lkml.org/lkml/2015/2/23/728
> [4] [PATCH 0/3] thermal: exynos: Add support for Exynos5433 TMU
> - https://lkml.org/lkml/2015/2/26/234
>
> Changelog:
>
> Changes from v5:
> (https://lkml.org/lkml/2015/3/5/27)
> - Move 'timer' dt node under root node by Mark Rutland's comment
>
> Changes from v4:
> (https://lkml.org/lkml/2015/2/24/2)
> - Rebased it on Linux 4.0-rc2
> - Remove CONFIG_ARCH_EXYNOS5433 configuration by Arnd Bergmann's comment
> - Move 'aliases' dt node from SoC dtsi to board dts file by Arnd Bergmann's comment
> - Add Exynos5433 TMU patches which got the Lukasz Majewski's reviewed message
>
> Changes from v3:
> (https://lkml.org/lkml/2015/2/12/65)
> - Rebased it on Linux 4.0-rc1.
> - Remove ARM_GIC and ARM_AMBA dependency because CONFIG_ARM64 already included them.
>
> Changes from v2:
> (https://lkml.org/lkml/2014/12/2/134)
> : Fix the range of GICC memory map (0x1000 -> 0x2000)
> : Fix address space of 'range' property under 'soc' node
> : Add ADMA / I2S dt node for sound playback/capture
> - Select ARM_AMBA/ARM_GIC/HAVE_S3C_RTC for Exynos5433 in arch/arm64/Kconfig
> - Send separate patch-set for Exynos5433 clock controller[1][2] and pinctrl[3]
>
> Changes from v1:
> (https://lkml.org/lkml/2014/11/27/92)
> - Merge two patches (patch2, patch3) to solve incomplete description
> - Exynos5433 Clock driver
> : Fix wrong register and code clean by using space instead of tab
> : Add CLK_IGNORE_UNUSED flag to pclk_sysreg_* clock for accessing system control register
> : Remove duplicate definition on the patch for CMU_BUS{0|1|2} domain
> - Exynos5433 SoC DTS
> : Remove un-supported properties of arch_timer
> : Remove 'clock-frequency' property from 'cpus' dt node
> : Fix interrupt type from edge rising triggering to level high triggering
> because Cortex-A53/A57 use level triggering.
> : Fix defult address-size/size-celss from 1 to 2 because Exynos5433 is 64-bit SoC
> : Modify 'fin_pll' dt node to remove un-needed and ugly code
> : Move 'chipid' dt node under 'soc'
> : Use lowercase on all case in exynos5433.dtsi
> : Add PSCI dt node for secondary cpu boot
> : Add 'samsung,exynos5433' compatible to MCT dt node
> - Divide pinctrl patch from this patchset
> - Add new following patches:
> : clocksource: exynos_mct: Add the support for Exynos 64bit SoC
> : arm64: Enable Exynos5433 SoC in the defconfig
>
> Chanwoo Choi (6):
> arm64: dts: exynos: Add dts files for 64-bit Exynos5433 SoC
> arm64: dts: exynos: Add SPI/PDMA dt node for Exynos5433
> arm64: dts: exynos: Add PMU dt node for Exynos5433
> arm64: dts: exynos: Add RTC and ADC dt node for Exynos5433 SoC
> arm64: dts: exynos: Add TMU sensor dt node for Exynos5433 SoC
> arm64: dts: exynos: Add thermal-zones dt node for Exynos5433 SoC
>
> Inha Song (2):
> arm64: dts: exynos: Add ADMA dt node for Exynos5433 SoC
> arm64: dts: exynos: Add I2S dt node for Exynos5433 SoC
>
> Jaehoon Chung (1):
> arm64: dts: exynos: Add MSHC dt node for Exynos5433
>
> .../devicetree/bindings/arm/samsung/pmu.txt | 1 +
> arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
> .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
> arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 931 +++++++++++++++++++++
> 5 files changed, 1883 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
>
prev parent reply other threads:[~2015-03-16 5:04 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-10 1:57 [PATCH v6 0/9] arm64: Add the support for new Exynos5433 SoC Chanwoo Choi
2015-03-10 1:57 ` [PATCHv v6 1/9] arm64: dts: exynos: Add dts files for 64-bit " Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 2/9] arm64: dts: exynos: Add MSHC dt node for Exynos5433 Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 3/9] arm64: dts: exynos: Add SPI/PDMA " Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 4/9] arm64: dts: exynos: Add PMU " Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 5/9] arm64: dts: exynos: Add RTC and ADC dt node for Exynos5433 SoC Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 6/9] arm64: dts: exynos: Add ADMA " Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 7/9] arm64: dts: exynos: Add I2S " Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 8/9] arm64: dts: exynos: Add TMU sensor " Chanwoo Choi
2015-03-10 1:57 ` [PATCH v6 9/9] arm64: dts: exynos: Add thermal-zones " Chanwoo Choi
2015-03-16 5:04 ` Chanwoo Choi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55066466.90502@samsung.com \
--to=cw00.choi@samsung.com \
--cc=a.kesavan@samsung.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=chanho61.park@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=ideal.song@samsung.com \
--cc=inki.dae@samsung.com \
--cc=jh80.chung@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=sw0312.kim@samsung.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).