linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chanwoo Choi <cw00.choi@samsung.com>
To: kgene@kernel.org
Cc: mark.rutland@arm.com, marc.zyngier@arm.com, arnd@arndb.de,
	olof@lixom.net, catalin.marinas@arm.com, will.deacon@arm.com,
	inki.dae@samsung.com, chanho61.park@samsung.com,
	sw0312.kim@samsung.com, jh80.chung@samsung.com,
	ideal.song@samsung.com, cw00.choi@samsung.com,
	a.kesavan@samsung.com, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 8/9] arm64: dts: exynos: Add TMU sensor dt node for Exynos5433 SoC
Date: Tue, 10 Mar 2015 10:57:34 +0900	[thread overview]
Message-ID: <1425952655-21654-9-git-send-email-cw00.choi@samsung.com> (raw)
In-Reply-To: <1425952655-21654-1-git-send-email-cw00.choi@samsung.com>

This patch adds the TMU (Thermal Management Unit) sensor devicetree node for
Exynos5433. The Exynos5433 includes the five temperature sensors as following:
- two temperature sensor for Cortex-A57 (ATLAS)
- one temperature sensor for Cortex-A53 (APOLLO)
- one temperature sensor for G3D IP
- one temperature sensor for ISP IP

Cc: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
---
 .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     | 22 +++++++++
 arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 55 ++++++++++++++++++++++
 2 files changed, 77 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
new file mode 100644
index 0000000..396e60f
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Device tree sources for Exynos5433 TMU sensor configuration
+ *
+ * Copyright (c) 2015 Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <75>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <150>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index fea4e32..22f36f5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -836,6 +836,61 @@
 			status = "disabled";
 		};
 
+		tmu_atlas0: tmu@10060000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10060000 0x200>;
+			interrupts = <0 95 0>;
+			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+				 <&cmu_peris CLK_SCLK_TMU0>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_atlas1: tmu@10068000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10068000 0x200>;
+			interrupts = <0 96 0>;
+			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+				 <&cmu_peris CLK_SCLK_TMU0>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_g3d: tmu@10070000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10070000 0x200>;
+			interrupts = <0 99 0>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				 <&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_apollo: tmu@10078000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10078000 0x200>;
+			interrupts = <0 115 0>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				 <&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_isp: tmu@1007c000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x1007c000 0x200>;
+			interrupts = <0 94 0>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				 <&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
 		pmu_system_controller: system-controller@105c0000 {
 			compatible = "samsung,exynos5433-pmu", "syscon";
 			reg = <0x105c0000 0x5008>;
-- 
1.8.5.5


  parent reply	other threads:[~2015-03-10  1:58 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-10  1:57 [PATCH v6 0/9] arm64: Add the support for new Exynos5433 SoC Chanwoo Choi
2015-03-10  1:57 ` [PATCHv v6 1/9] arm64: dts: exynos: Add dts files for 64-bit " Chanwoo Choi
2015-03-10  1:57 ` [PATCH v6 2/9] arm64: dts: exynos: Add MSHC dt node for Exynos5433 Chanwoo Choi
2015-03-10  1:57 ` [PATCH v6 3/9] arm64: dts: exynos: Add SPI/PDMA " Chanwoo Choi
2015-03-10  1:57 ` [PATCH v6 4/9] arm64: dts: exynos: Add PMU " Chanwoo Choi
2015-03-10  1:57 ` [PATCH v6 5/9] arm64: dts: exynos: Add RTC and ADC dt node for Exynos5433 SoC Chanwoo Choi
2015-03-10  1:57 ` [PATCH v6 6/9] arm64: dts: exynos: Add ADMA " Chanwoo Choi
2015-03-10  1:57 ` [PATCH v6 7/9] arm64: dts: exynos: Add I2S " Chanwoo Choi
2015-03-10  1:57 ` Chanwoo Choi [this message]
2015-03-10  1:57 ` [PATCH v6 9/9] arm64: dts: exynos: Add thermal-zones " Chanwoo Choi
2015-03-16  5:04 ` [PATCH v6 0/9] arm64: Add the support for new " Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425952655-21654-9-git-send-email-cw00.choi@samsung.com \
    --to=cw00.choi@samsung.com \
    --cc=a.kesavan@samsung.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=chanho61.park@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ideal.song@samsung.com \
    --cc=inki.dae@samsung.com \
    --cc=jh80.chung@samsung.com \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=olof@lixom.net \
    --cc=sw0312.kim@samsung.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).