From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v10 13/19] h8300: Memory management
Date: Mon, 4 May 2015 19:41:56 +0900 [thread overview]
Message-ID: <1430736122-20929-15-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1430736122-20929-2-git-send-email-ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/mm/Makefile | 5 ++
arch/h8300/mm/fault.c | 57 ++++++++++++++++++++++
arch/h8300/mm/init.c | 128 +++++++++++++++++++++++++++++++++++++++++++++++++
arch/h8300/mm/memory.c | 53 ++++++++++++++++++++
4 files changed, 243 insertions(+)
create mode 100644 arch/h8300/mm/Makefile
create mode 100644 arch/h8300/mm/fault.c
create mode 100644 arch/h8300/mm/init.c
create mode 100644 arch/h8300/mm/memory.c
diff --git a/arch/h8300/mm/Makefile b/arch/h8300/mm/Makefile
new file mode 100644
index 0000000..508697f
--- /dev/null
+++ b/arch/h8300/mm/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux h8300-specific parts of the memory manager.
+#
+
+obj-y := init.o fault.o memory.o
diff --git a/arch/h8300/mm/fault.c b/arch/h8300/mm/fault.c
new file mode 100644
index 0000000..5924ff5
--- /dev/null
+++ b/arch/h8300/mm/fault.c
@@ -0,0 +1,57 @@
+/*
+ * linux/arch/h8300/mm/fault.c
+ *
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
+ * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
+ *
+ * Based on:
+ *
+ * linux/arch/m68knommu/mm/fault.c
+ * linux/arch/m68k/mm/fault.c
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+
+#include <asm/pgtable.h>
+
+void die(const char *str, struct pt_regs *fp, unsigned long err);
+
+/*
+ * This routine handles page faults. It determines the problem, and
+ * then passes it off to one of the appropriate routines.
+ *
+ * error_code:
+ * bit 0 == 0 means no page found, 1 means protection fault
+ * bit 1 == 0 means read, 1 means write
+ *
+ * If this routine detects a bad access, it returns 1, otherwise it
+ * returns 0.
+ */
+asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
+{
+#ifdef DEBUG
+ pr_debug("regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
+ regs->sr, regs->pc, address, error_code);
+#endif
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+ if ((unsigned long) address < PAGE_SIZE)
+ pr_alert("Unable to handle kernel NULL pointer dereference");
+ else
+ pr_alert("Unable to handle kernel access");
+ printk(" at virtual address %08lx\n", address);
+ if (!user_mode(regs))
+ die("Oops", regs, error_code);
+ do_exit(SIGKILL);
+
+ return 1;
+}
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
new file mode 100644
index 0000000..495a3d6
--- /dev/null
+++ b/arch/h8300/mm/init.c
@@ -0,0 +1,128 @@
+/*
+ * linux/arch/h8300/mm/init.c
+ *
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
+ * Kenneth Albanowski <kjahds@kjahds.com>,
+ * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
+ *
+ * Based on:
+ *
+ * linux/arch/m68knommu/mm/init.c
+ * linux/arch/m68k/mm/init.c
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ *
+ * JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com)
+ * DEC/2000 -- linux 2.4 support <davidm@snapgear.com>
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+#include <linux/gfp.h>
+
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+
+/*
+ * BAD_PAGE is the page that is used for page faults when linux
+ * is out-of-memory. Older versions of linux just did a
+ * do_exit(), but using this instead means there is less risk
+ * for a process dying in kernel mode, possibly leaving a inode
+ * unused etc..
+ *
+ * BAD_PAGETABLE is the accompanying page-table: it is initialized
+ * to point to BAD_PAGE entries.
+ *
+ * ZERO_PAGE is a special page that is used for zero-initialized
+ * data and COW.
+ */
+static unsigned long empty_bad_page_table;
+static unsigned long empty_bad_page;
+unsigned long empty_zero_page;
+
+/*
+ * paging_init() continues the virtual memory environment setup which
+ * was begun by the code in arch/head.S.
+ * The parameters are pointers to where to stick the starting and ending
+ * addresses of available kernel virtual memory.
+ */
+void __init paging_init(void)
+{
+ /*
+ * Make sure start_mem is page aligned, otherwise bootmem and
+ * page_alloc get different views og the world.
+ */
+ unsigned long start_mem = PAGE_ALIGN(memory_start);
+ unsigned long end_mem = memory_end & PAGE_MASK;
+
+ pr_debug("start_mem is %#lx\nvirtual_end is %#lx\n",
+ start_mem, end_mem);
+
+ /*
+ * Initialize the bad page table and bad page to point
+ * to a couple of allocated pages.
+ */
+ empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ memset((void *)empty_zero_page, 0, PAGE_SIZE);
+
+ /*
+ * Set up SFC/DFC registers (user data space).
+ */
+ set_fs(USER_DS);
+
+ pr_debug("before free_area_init\n");
+
+ pr_debug("free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n",
+ start_mem, end_mem);
+
+ {
+ unsigned long zones_size[MAX_NR_ZONES] = {0, };
+
+ zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
+ free_area_init(zones_size);
+ }
+}
+
+void __init mem_init(void)
+{
+ pr_devel("Mem_init: start=%lx, end=%lx\n", memory_start, memory_end);
+
+ high_memory = (void *) (memory_end & PAGE_MASK);
+ max_mapnr = MAP_NR(high_memory);
+
+ /* this will put all low memory onto the freelists */
+ free_all_bootmem();
+
+ mem_init_print_info(NULL);
+}
+
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ free_reserved_area((void *)start, (void *)end, -1, "initrd");
+}
+#endif
+
+void
+free_initmem(void)
+{
+ free_initmem_default(-1);
+}
diff --git a/arch/h8300/mm/memory.c b/arch/h8300/mm/memory.c
new file mode 100644
index 0000000..4974aa4
--- /dev/null
+++ b/arch/h8300/mm/memory.c
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/h8300/mm/memory.c
+ *
+ * Copyright (C) 2002 Yoshinori Sato <ysato@users.sourceforge.jp>,
+ *
+ * Based on:
+ *
+ * linux/arch/m68knommu/mm/memory.c
+ *
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ * Based on:
+ *
+ * linux/arch/m68k/mm/memory.c
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/traps.h>
+#include <asm/io.h>
+
+void cache_clear(unsigned long paddr, int len)
+{
+}
+
+
+void cache_push(unsigned long paddr, int len)
+{
+}
+
+void cache_push_v(unsigned long vaddr, int len)
+{
+}
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+
+unsigned long kernel_map(unsigned long paddr, unsigned long size,
+ int nocacheflag, unsigned long *memavailp)
+{
+ return paddr;
+}
--
2.1.4
next prev parent reply other threads:[~2015-05-04 10:43 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-04 10:41 [PATCH v10 00/19] Re-introduce h8300 architecture Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 01/19] MAINTENRS: Add h8300 Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 02/19] Add H8/300 ELF Machine Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 03/19] mksysmap: Avoid h8300's local symbol Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 04/19] sh-sci: Add H8/300 SCI Yoshinori Sato
2015-05-04 13:58 ` Geert Uytterhoeven
2015-05-04 10:41 ` [PATCH v10 05/19] Add common asm-offsets.h Yoshinori Sato
2015-05-04 14:46 ` Arnd Bergmann
2015-05-07 4:24 ` Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 06/19] h8300: Assembly headers Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 07/19] h8300: UAPI assembly headers Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 08/19] h8300: Exception and Interrupt handling Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 09/19] h8300: kernel booting Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 10/19] h8300: process and signals Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 11/19] h8300: CPU depend helpers Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 12/19] h8300: miscellaneous functions Yoshinori Sato
2015-05-04 10:41 ` Yoshinori Sato [this message]
2015-05-04 10:41 ` [PATCH v10 14/19] h8300: Library functions Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 15/19] h8300: Build scripts Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 16/19] h8300: clock driver Yoshinori Sato
2015-05-04 10:42 ` [PATCH v10 17/19] h8300: clocksource Yoshinori Sato
2015-05-04 10:42 ` [PATCH v10 18/19] h8300: configs Yoshinori Sato
2015-05-04 10:42 ` [PATCH v10 19/19] h8300: devicetree source Yoshinori Sato
2015-05-04 12:40 ` Geert Uytterhoeven
2015-05-04 15:09 ` Arnd Bergmann
2015-05-07 4:47 ` Yoshinori Sato
2015-05-04 15:28 ` [PATCH v10 00/19] Re-introduce h8300 architecture Arnd Bergmann
2015-05-05 2:27 ` Guenter Roeck
2015-05-07 4:22 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430736122-20929-15-git-send-email-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).