From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v10 07/19] h8300: UAPI assembly headers.
Date: Mon, 4 May 2015 19:41:50 +0900 [thread overview]
Message-ID: <1430736122-20929-9-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1430736122-20929-2-git-send-email-ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/include/uapi/asm/Kbuild | 30 ++++++++
arch/h8300/include/uapi/asm/byteorder.h | 6 ++
arch/h8300/include/uapi/asm/ptrace.h | 42 +++++++++++
arch/h8300/include/uapi/asm/sigcontext.h | 18 +++++
arch/h8300/include/uapi/asm/signal.h | 115 +++++++++++++++++++++++++++++++
arch/h8300/include/uapi/asm/unistd.h | 3 +
6 files changed, 214 insertions(+)
create mode 100644 arch/h8300/include/uapi/asm/Kbuild
create mode 100644 arch/h8300/include/uapi/asm/byteorder.h
create mode 100644 arch/h8300/include/uapi/asm/ptrace.h
create mode 100644 arch/h8300/include/uapi/asm/sigcontext.h
create mode 100644 arch/h8300/include/uapi/asm/signal.h
create mode 100644 arch/h8300/include/uapi/asm/unistd.h
diff --git a/arch/h8300/include/uapi/asm/Kbuild b/arch/h8300/include/uapi/asm/Kbuild
new file mode 100644
index 0000000..fb6101a
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/Kbuild
@@ -0,0 +1,30 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += kvm_para.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += siginfo.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += unistd.h
diff --git a/arch/h8300/include/uapi/asm/byteorder.h b/arch/h8300/include/uapi/asm/byteorder.h
new file mode 100644
index 0000000..13539da
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_BYTEORDER_H
+#define _H8300_BYTEORDER_H
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _H8300_BYTEORDER_H */
diff --git a/arch/h8300/include/uapi/asm/ptrace.h b/arch/h8300/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..e132670d
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/ptrace.h
@@ -0,0 +1,42 @@
+#ifndef _UAPI_H8300_PTRACE_H
+#define _UAPI_H8300_PTRACE_H
+
+#ifndef __ASSEMBLY__
+
+#define PT_ER1 0
+#define PT_ER2 1
+#define PT_ER3 2
+#define PT_ER4 3
+#define PT_ER5 4
+#define PT_ER6 5
+#define PT_ER0 6
+#define PT_USP 7
+#define PT_ORIG_ER0 8
+#define PT_CCR 9
+#define PT_PC 10
+#define PT_EXR 11
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+struct pt_regs {
+ long retpc;
+ long er4;
+ long er5;
+ long er6;
+ long er3;
+ long er2;
+ long er1;
+ long orig_er0;
+ long sp;
+ unsigned short ccr;
+ long er0;
+ long vector;
+#if defined(__H8300S__)
+ unsigned short exr;
+#endif
+ unsigned long pc;
+} __attribute__((aligned(2), packed));
+
+#endif /* __ASSEMBLY__ */
+#endif /* _UAPI_H8300_PTRACE_H */
diff --git a/arch/h8300/include/uapi/asm/sigcontext.h b/arch/h8300/include/uapi/asm/sigcontext.h
new file mode 100644
index 0000000..c41fdaa
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/sigcontext.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_H8300_SIGCONTEXT_H
+#define _ASM_H8300_SIGCONTEXT_H
+
+struct sigcontext {
+ unsigned long sc_mask; /* old sigmask */
+ unsigned long sc_usp; /* old user stack pointer */
+ unsigned long sc_er0;
+ unsigned long sc_er1;
+ unsigned long sc_er2;
+ unsigned long sc_er3;
+ unsigned long sc_er4;
+ unsigned long sc_er5;
+ unsigned long sc_er6;
+ unsigned short sc_ccr;
+ unsigned long sc_pc;
+};
+
+#endif
diff --git a/arch/h8300/include/uapi/asm/signal.h b/arch/h8300/include/uapi/asm/signal.h
new file mode 100644
index 0000000..af3a6c3
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/signal.h
@@ -0,0 +1,115 @@
+#ifndef _UAPI_H8300_SIGNAL_H
+#define _UAPI_H8300_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal-defs.h>
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+
+#endif /* _UAPI_H8300_SIGNAL_H */
diff --git a/arch/h8300/include/uapi/asm/unistd.h b/arch/h8300/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..7a2eb69
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/unistd.h
@@ -0,0 +1,3 @@
+#define __ARCH_NOMMU
+
+#include <asm-generic/unistd.h>
--
2.1.4
next prev parent reply other threads:[~2015-05-04 10:46 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-04 10:41 [PATCH v10 00/19] Re-introduce h8300 architecture Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 01/19] MAINTENRS: Add h8300 Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 02/19] Add H8/300 ELF Machine Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 03/19] mksysmap: Avoid h8300's local symbol Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 04/19] sh-sci: Add H8/300 SCI Yoshinori Sato
2015-05-04 13:58 ` Geert Uytterhoeven
2015-05-04 10:41 ` [PATCH v10 05/19] Add common asm-offsets.h Yoshinori Sato
2015-05-04 14:46 ` Arnd Bergmann
2015-05-07 4:24 ` Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 06/19] h8300: Assembly headers Yoshinori Sato
2015-05-04 10:41 ` Yoshinori Sato [this message]
2015-05-04 10:41 ` [PATCH v10 08/19] h8300: Exception and Interrupt handling Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 09/19] h8300: kernel booting Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 10/19] h8300: process and signals Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 11/19] h8300: CPU depend helpers Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 12/19] h8300: miscellaneous functions Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 13/19] h8300: Memory management Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 14/19] h8300: Library functions Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 15/19] h8300: Build scripts Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 16/19] h8300: clock driver Yoshinori Sato
2015-05-04 10:42 ` [PATCH v10 17/19] h8300: clocksource Yoshinori Sato
2015-05-04 10:42 ` [PATCH v10 18/19] h8300: configs Yoshinori Sato
2015-05-04 10:42 ` [PATCH v10 19/19] h8300: devicetree source Yoshinori Sato
2015-05-04 12:40 ` Geert Uytterhoeven
2015-05-04 15:09 ` Arnd Bergmann
2015-05-07 4:47 ` Yoshinori Sato
2015-05-04 15:28 ` [PATCH v10 00/19] Re-introduce h8300 architecture Arnd Bergmann
2015-05-05 2:27 ` Guenter Roeck
2015-05-07 4:22 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430736122-20929-9-git-send-email-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).