From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Linux-Arch <linux-arch@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Subject: Re: [PATCH v10 19/19] h8300: devicetree source
Date: Mon, 4 May 2015 14:40:43 +0200 [thread overview]
Message-ID: <CAMuHMdX8KoGR1_yPgofCPkMma=chc7mQfP5-9T6e9bbqx=aRoA@mail.gmail.com> (raw)
In-Reply-To: <1430736122-20929-21-git-send-email-ysato@users.sourceforge.jp>
CC devicetree
On Mon, May 4, 2015 at 12:42 PM, Yoshinori Sato
<ysato@users.sourceforge.jp> wrote:
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
> Documentation/devicetree/bindings/h8300/cpu.txt | 17 ++++
> .../interrupt-controller/renesas,h8300h-intc.txt | 20 ++++
> .../interrupt-controller/renesas,h8s-intc.txt | 20 ++++
> arch/h8300/boot/dts/Makefile | 11 ++
> arch/h8300/boot/dts/dt-bindings | 1 +
> arch/h8300/boot/dts/edosk2674.dts | 111 +++++++++++++++++++++
> arch/h8300/boot/dts/h8300h_sim.dts | 97 ++++++++++++++++++
> arch/h8300/boot/dts/h8s_sim.dts | 103 +++++++++++++++++++
> 8 files changed, 380 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/h8300/cpu.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
> create mode 100644 arch/h8300/boot/dts/Makefile
> create mode 120000 arch/h8300/boot/dts/dt-bindings
> create mode 100644 arch/h8300/boot/dts/edosk2674.dts
> create mode 100644 arch/h8300/boot/dts/h8300h_sim.dts
> create mode 100644 arch/h8300/boot/dts/h8s_sim.dts
>
> diff --git a/Documentation/devicetree/bindings/h8300/cpu.txt b/Documentation/devicetree/bindings/h8300/cpu.txt
> new file mode 100644
> index 0000000..f1287e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/h8300/cpu.txt
> @@ -0,0 +1,17 @@
> +* H8/300 CPU bindings
> +
> +Required properties:
> +
> +- compatible: Compatible property value should be "renesas,h8300".
> +- reg: Contains CPU index.
> +- clock-frequency: Contains the clock frequency for CPU, in Hz.
> +- renesas,bus-width: Contain the memory bus width.
> +
> +Example:
> +
> + cpu@0 {
> + compatible = "renesas,h8300";
> + reg = <0>;
> + clock-frequency = <20000000>;
> + renesas,bus-width = <16>;
> + };
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
> new file mode 100644
> index 0000000..79053dd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
> @@ -0,0 +1,20 @@
> +* H8/300H Interrupt controller
> +
> +Required properties:
> +
> +- compatible: has to be "renesas,h8300h-intc", "renesas,h8300-intc" as fallback.
> +- #interrupt-cells: has to be <1>: an interrupt index and flags, as defined in
> + interrupts.txt in this directory
> +
> +Optional properties:
> +
> +- any properties, listed in interrupts.txt, and any standard resource allocation
> + properties
> +
> +Example:
> +
> + h8intc: intc@0 {
> + compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + };
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
> new file mode 100644
> index 0000000..1206191
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
> @@ -0,0 +1,20 @@
> +* H8S Interrupt controller
> +
> +Required properties:
> +
> +- compatible: has to be "renesas,h8s-intc", "renesas,h8300-intc" as fallback.
> +- #interrupt-cells: has to be <1>: an interrupt index and flags, as defined in
> + interrupts.txt in this directory
> +
> +Optional properties:
> +
> +- any properties, listed in interrupts.txt, and any standard resource allocation
> + properties
> +
> +Example:
> +
> + h8intc: intc@0 {
> + compatible = "renesas,h8s-intc", "renesas,h8300-intc";
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + };
> diff --git a/arch/h8300/boot/dts/Makefile b/arch/h8300/boot/dts/Makefile
> new file mode 100644
> index 0000000..bb123fa
> --- /dev/null
> +++ b/arch/h8300/boot/dts/Makefile
> @@ -0,0 +1,11 @@
> +ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
> +BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_H8300_BUILTIN_DTB)).dtb.o
> +endif
> +
> +obj-y += $(BUILTIN_DTB)
> +
> +dtb-$(CONFIG_H8300H_SIM) := h8300h_sim.dtb
> +dtb-$(CONFIG_H8S_SIM) := h8s_sim.dtb
> +dtb-$(CONFIG_EDOSK2674) := edosk2674.dtb
> +
> +clean-files := *.dtb.S
> diff --git a/arch/h8300/boot/dts/dt-bindings b/arch/h8300/boot/dts/dt-bindings
> new file mode 120000
> index 0000000..0cecb3d
> --- /dev/null
> +++ b/arch/h8300/boot/dts/dt-bindings
> @@ -0,0 +1 @@
> +../../../../include/dt-bindings
> \ No newline at end of file
> diff --git a/arch/h8300/boot/dts/edosk2674.dts b/arch/h8300/boot/dts/edosk2674.dts
> new file mode 100644
> index 0000000..fe3c334
> --- /dev/null
> +++ b/arch/h8300/boot/dts/edosk2674.dts
> @@ -0,0 +1,111 @@
> +#include <dt-bindings/clock/renesas,8bit-timer.h>
> +
> +/dts-v1/;
> +/ {
> + compatible = "renesas,edosk2674";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&h8intc>;
> +
> + chosen {
> + bootargs = "console=ttySC2,38400";
> + };
> + aliases {
> + serial0 = &sci0;
> + serial1 = &sci1;
> + serial2 = &sci2;
> + };
> +
> + clocks {
> + ranges;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + xclk: xclk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <33333333>;
> + clock-output-names = "xtal";
> + };
> + pllclk: pllclk {
> + compatible = "renesas,h8s2678-pll-clock";
> + clocks = <&xclk>;
> + #clock-cells = <0>;
> + reg = <0xfee03b 2>, <0xfee045 2>;
> + };
> + cclk: cclk {
> + compatible = "renesas,h8300-div-clock";
> + clocks = <&pllclk>;
> + #clock-cells = <0>;
> + reg = <0xfee03b 2>;
> + renesas,width = <3>;
> + };
> + pclk: pclk {
> + compatible = "fixed-factor-clock";
> + clocks = <&cclk>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + };
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x400000 0x800000>;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cpu@0 {
> + compatible = "renesas,h8300";
> + reg = <0>;
> + renesas,bus-width = <16>;
> + clock-frequency = <33333333>;
> + bus-width = <16>;
> + };
> + };
> +
> + h8intc: intc@0 {
> + compatible = "renesas,h8s-intc", "renesas,h8300-intc";
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + };
> + tpu: tpu@ffffe0 {
> + compatible = "renesas,tpu";
> + reg = <0xffffe0 16>, <0xfffff0 12>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + };
> +
> + timer8: timer@ffffb0 {
> + compatible = "renesas,8bit-timer";
> + reg = <0xffff80 10>;
> + interrupts = <72 75>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + renesas,mode = <CLOCKEVENTDEVICE>;
> + renesas,div = <DIV_8>;
> + };
> +
> + sci0: serial@ffff78 {
> + compatible = "renesas,sci";
> + reg = <0xffff78 8>;
> + interrupts = <88 89 90 91>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + };
> + sci1: serial@ffff80 {
> + compatible = "renesas,sci";
> + reg = <0xffff80 8>;
> + interrupts = <92 93 94 95>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + };
> + sci2: serial@ffff88 {
> + compatible = "renesas,sci";
> + reg = <0xffff88 8>;
> + interrupts = <96 97 98 99>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + };
> +};
> diff --git a/arch/h8300/boot/dts/h8300h_sim.dts b/arch/h8300/boot/dts/h8300h_sim.dts
> new file mode 100644
> index 0000000..bd150fb
> --- /dev/null
> +++ b/arch/h8300/boot/dts/h8300h_sim.dts
> @@ -0,0 +1,97 @@
> +#include <dt-bindings/clock/renesas,8bit-timer.h>
> +
> +/dts-v1/;
> +/ {
> + compatible = "gnu,gdbsim";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&h8intc>;
> +
> + chosen {
> + bootargs = "console=ttySC0";
> + };
> + aliases {
> + serial0 = &sci0;
> + serial1 = &sci1;
> + };
> +
> + clocks {
> + ranges;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + xclk: xclk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <20000000>;
> + clock-output-names = "xtal";
> + };
> + cclk: cclk {
> + compatible = "renesas,h8300-div-clock";
> + clocks = <&xclk>;
> + #clock-cells = <0>;
> + reg = <0xfee01b 2>;
> + renesas,width = <2>;
> + };
> + pclk: pclk {
> + compatible = "fixed-factor-clock";
> + clocks = <&cclk>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + };
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x400000 0x400000>;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cpu@0 {
> + compatible = "renesas,h8300";
> + reg = <0>;
> + clock-frequency = <20000000>;
> + renesas,bus-width = <16>;
> + };
> + };
> +
> + h8intc: intc@0 {
> + compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + };
> + timer8: timer@ffff80 {
> + compatible = "renesas,8bit-timer";
> + reg = <0xffff80 10>;
> + interrupts = <36 39>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + renesas,mode = <CLOCKSOURCE>;
> + renesas,div = <DIV_8>;
> + };
> + timer16: timer@ffff68 {
> + compatible = "renesas,16bit-timer";
> + reg = <0xffff68 8>, <0xffff60 8>;
> + interrupts = <24>;
> + renesas,channel = <0>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + };
> +
> + sci0: serial@ffffb0 {
> + compatible = "renesas,sci";
> + reg = <0xffffb0 8>;
> + interrupts = <52 53 54 55>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + };
> + sci1: serial@ffffb8 {
> + compatible = "renesas,sci";
> + reg = <0xffffb8 8>;
> + interrupts = <56 57 58 59>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + };
> +};
> diff --git a/arch/h8300/boot/dts/h8s_sim.dts b/arch/h8300/boot/dts/h8s_sim.dts
> new file mode 100644
> index 0000000..26b653d
> --- /dev/null
> +++ b/arch/h8300/boot/dts/h8s_sim.dts
> @@ -0,0 +1,103 @@
> +#include <dt-bindings/clock/renesas,8bit-timer.h>
> +
> +/dts-v1/;
> +/ {
> + compatible = "gnu,gdbsim";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&h8intc>;
> +
> + chosen {
> + bootargs = "console=ttySC0";
> + };
> + aliases {
> + serial0 = &sci0;
> + serial1 = &sci1;
> + };
> +
> + clocks {
> + ranges;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + xclk: xclk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <33333333>;
> + clock-output-names = "xtal";
> + };
> + pllclk: pllclk {
> + compatible = "renesas,h8s2678-pll-clock";
> + clocks = <&xclk>;
> + #clock-cells = <0>;
> + reg = <0xfee03b 2>, <0xfee045 2>;
> + };
> + cclk: cclk {
> + compatible = "renesas,h8300-div-clock";
> + clocks = <&pllclk>;
> + #clock-cells = <0>;
> + reg = <0xfee03b 2>;
> + renesas,width = <3>;
> + };
> + pclk: pclk {
> + compatible = "fixed-factor-clock";
> + clocks = <&cclk>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + };
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x400000 0x800000>;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cpu@0 {
> + compatible = "renesas,h8300";
> + reg = <0>;
> + renesas,bus-width = <16>;
> + clock-frequency = <33333333>;
> + bus-width = <16>;
> + };
> + };
> +
> + h8intc: intc@0 {
> + compatible = "renesas,h8s-intc", "renesas,h8300-intc";
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + };
> + tpu: tpu@ffffe0 {
> + compatible = "renesas,tpu";
> + reg = <0xffffe0 16>, <0xfffff0 12>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + };
> +
> + timer8: timer@ffffb0 {
> + compatible = "renesas,8bit-timer";
> + reg = <0xffff80 10>;
> + interrupts = <72 75>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + renesas,mode = <CLOCKEVENTDEVICE>;
> + renesas,div = <DIV_8>;
> + };
> +
> + sci0: serial@ffff78 {
> + compatible = "renesas,sci";
> + reg = <0xffff78 8>;
> + interrupts = <88 89 90 91>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + };
> + sci1: serial@ffff80 {
> + compatible = "renesas,sci";
> + reg = <0xffff80 8>;
> + interrupts = <92 93 94 95>;
> + clocks = <&pclk>;
> + clock-names = "peripheral_clk";
> + };
> +};
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arch" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-05-04 12:40 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-04 10:41 [PATCH v10 00/19] Re-introduce h8300 architecture Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 01/19] MAINTENRS: Add h8300 Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 02/19] Add H8/300 ELF Machine Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 03/19] mksysmap: Avoid h8300's local symbol Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 04/19] sh-sci: Add H8/300 SCI Yoshinori Sato
2015-05-04 13:58 ` Geert Uytterhoeven
2015-05-04 10:41 ` [PATCH v10 05/19] Add common asm-offsets.h Yoshinori Sato
2015-05-04 14:46 ` Arnd Bergmann
2015-05-07 4:24 ` Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 06/19] h8300: Assembly headers Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 07/19] h8300: UAPI assembly headers Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 08/19] h8300: Exception and Interrupt handling Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 09/19] h8300: kernel booting Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 10/19] h8300: process and signals Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 11/19] h8300: CPU depend helpers Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 12/19] h8300: miscellaneous functions Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 13/19] h8300: Memory management Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 14/19] h8300: Library functions Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 15/19] h8300: Build scripts Yoshinori Sato
2015-05-04 10:41 ` [PATCH v10 16/19] h8300: clock driver Yoshinori Sato
2015-05-04 10:42 ` [PATCH v10 17/19] h8300: clocksource Yoshinori Sato
2015-05-04 10:42 ` [PATCH v10 18/19] h8300: configs Yoshinori Sato
2015-05-04 10:42 ` [PATCH v10 19/19] h8300: devicetree source Yoshinori Sato
2015-05-04 12:40 ` Geert Uytterhoeven [this message]
2015-05-04 15:09 ` Arnd Bergmann
2015-05-07 4:47 ` Yoshinori Sato
2015-05-04 15:28 ` [PATCH v10 00/19] Re-introduce h8300 architecture Arnd Bergmann
2015-05-05 2:27 ` Guenter Roeck
2015-05-07 4:22 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMuHMdX8KoGR1_yPgofCPkMma=chc7mQfP5-9T6e9bbqx=aRoA@mail.gmail.com' \
--to=geert@linux-m68k.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).