[PATCH v2 0/2] changelog

[PATCH v2 0/2] changelog

[Oleksij Rempel]

v2:
- move some parts from patch 2 to 1
- make separate irq_chip for ICOLL and ASM9260 

Oleksij Rempel (2):
  ARM: irqchip: mxs: prepare driver for HW with different offsets
  ARM: irqchip: mxs: add Alpascale ASM9260 support

 drivers/irqchip/Kconfig                    |   5 +
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++
 drivers/irqchip/irq-mxs.c                  | 188 ++++++++++++++++++++++++++---
 4 files changed, 286 insertions(+), 18 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

-- 
2.5.0

[PATCH v2 1/2] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Oleksij Rempel]

Some HW has similar functionality but different register offsets.
Make sure we can change offsets dynamically.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/irq-mxs.c | 83 ++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 67 insertions(+), 16 deletions(-)

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 1faf812..14374de 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -28,18 +28,39 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
 #define HW_ICOLL_STAT_OFFSET			0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define HW_ICOLL_INTERRUPT0			0x0120
+#define HW_ICOLL_INTERRUPTn(n)			((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE			BIT(2)
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
 #define ICOLL_NUM_IRQS		128
 
-static void __iomem *icoll_base;
+struct icoll_priv {
+	void __iomem *vector;
+	void __iomem *levelack;
+	void __iomem *ctrl;
+	void __iomem *stat;
+	void __iomem *intr;
+	/* number of interrupts per register */
+	int intr_per_reg;
+	void __iomem *clear;
+};
+
+static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
@@ -50,19 +71,19 @@ static void icoll_ack_irq(struct irq_data *d)
 	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
 	 */
 	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
-			icoll_base + HW_ICOLL_LEVELACK);
+			icoll_priv.levelack);
 }
 
 static void icoll_mask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -75,8 +96,8 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
 
-	irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
-	__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+	irqnr = __raw_readl(icoll_priv.stat);
+	__raw_writel(irqnr, icoll_priv.vector);
 	handle_domain_irq(icoll_domain, irqnr, regs);
 }
 
@@ -94,20 +115,50 @@ static const struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
+static void __init icoll_add_domain(struct device_node *np,
+			  int num)
+{
+	icoll_domain = irq_domain_add_linear(np, num,
+					     &icoll_irq_domain_ops, NULL);
+
+	if (!icoll_domain)
+		panic("%s: unable add irq domain", np->full_name);
+	irq_set_default_host(icoll_domain);
+	set_handle_irq(icoll_handle_irq);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
+{
+	void __iomem *icoll_base;
+
+	icoll_base = of_io_request_and_map(np, 0, np->name);
+	if (!icoll_base)
+		panic("%s: unable to map resource", np->full_name);
+	return icoll_base;
+}
+
 static int __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
-	icoll_base = of_iomap(np, 0);
-	WARN_ON(!icoll_base);
+	void __iomem *icoll_base;
+
+	icoll_base		= icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
+	icoll_priv.intr_per_reg	= 1;
+	icoll_priv.clear	= NULL;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
-	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+	stmp_reset_block(icoll_priv.ctrl);
+
+	icoll_add_domain(np, ICOLL_NUM_IRQS);
 
-	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
-					     &icoll_irq_domain_ops, NULL);
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
-- 
2.5.0

Re: [PATCH v2 1/2] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Thomas Gleixner]

On Fri, 18 Sep 2015, Oleksij Rempel wrote:

> Some HW has similar functionality but different register offsets.
> Make sure we can change offsets dynamically.

You forgot to mention the other preparatory changes.

Thanks,

	tglx

[PATCH v2 2/2] ARM: irqchip: mxs: add Alpascale ASM9260 support

[Oleksij Rempel]

From: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>

Freescale iMX23/iMX28 and Alphascale ASM9260 have similar
interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260.
Differences between this devices are fallowing:
- different register offsets
- different count of intterupt lines per register
- ASM9260 don't provide reset bit
- ASM9260 don't support FIQ.

Signed-off-by: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>
---
 drivers/irqchip/Kconfig                    |   5 ++
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  | 106 +++++++++++++++++++++++++++-
 4 files changed, 220 insertions(+), 2 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 27b52c8..0dfd840 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -187,3 +187,8 @@ config IMX_GPCV2
 	select IRQ_DOMAIN
 	help
 	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
+config IRQ_MXS
+	def_bool y if MACH_ASM9260 || ARCH_MXS
+	select IRQ_DOMAIN
+	select STMP_DEVICE
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bb3048f..177f78f 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
-obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
+obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
diff --git a/drivers/irqchip/alphascale_asm9260-icoll.h b/drivers/irqchip/alphascale_asm9260-icoll.h
new file mode 100644
index 0000000..5cec108
--- /dev/null
+++ b/drivers/irqchip/alphascale_asm9260-icoll.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ALPHASCALE_ASM9260_ICOLL_H
+#define _ALPHASCALE_ASM9260_ICOLL_H
+
+#define ASM9260_NUM_IRQS		64
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+
+#define ASM9260_HW_ICOLL_VECTOR				0x0000
+/*
+ * bits 31:2
+ * This register presents the vector address for the interrupt currently
+ * active on the CPU IRQ input. Writing to this register notifies the
+ * interrupt collector that the interrupt service routine for the current
+ * interrupt has been entered.
+ * The exception trap should have a LDPC instruction from this address:
+ * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018
+ */
+
+/*
+ * The Interrupt Collector Level Acknowledge Register is used by software to
+ * indicate the completion of an interrupt on a specific level.
+ * This register is written at the very end of an interrupt service routine. If
+ * nesting is used then the CPU irq must be turned on before writing to this
+ * register to avoid a race condition in the CPU interrupt hardware.
+ */
+#define ASM9260_HW_ICOLL_LEVELACK			0x0010
+#define ASM9260_BM_LEVELn(nr)				BIT(nr)
+
+#define ASM9260_HW_ICOLL_CTRL				0x0020
+/*
+ * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on
+ * asm9260.
+ */
+#define ASM9260_BM_CTRL_SFTRST				BIT(31)
+#define ASM9260_BM_CTRL_CLKGATE				BIT(30)
+/* disable interrupt level nesting */
+#define ASM9260_BM_CTRL_NO_NESTING			BIT(19)
+/*
+ * Set this bit to one enable the RISC32-style read side effect associated with
+ * the vector address register. In this mode, interrupt in-service is signaled
+ * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt
+ * vector address. Set this bit to zero for normal operation, in which the ISR
+ * signals in-service explicitly by means of a write to the
+ * ASM9260_HW_ICOLL_VECTOR register.
+ * 0 - Must Write to Vector register to go in-service.
+ * 1 - Go in-service as a read side effect
+ */
+#define ASM9260_BM_CTRL_ARM_RSE_MODE			BIT(18)
+#define ASM9260_BM_CTRL_IRQ_ENABLE			BIT(16)
+
+#define ASM9260_HW_ICOLL_STAT_OFFSET			0x0030
+/*
+ * bits 5:0
+ * Vector number of current interrupt. Multiply by 4 and add to vector base
+ * address to obtain the value in ASM9260_HW_ICOLL_VECTOR.
+ */
+
+/*
+ * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines
+ * coming from various parts of the chip. Its purpose is to improve diagnostic
+ * observability.
+ */
+#define ASM9260_HW_ICOLL_RAW0				0x0040
+#define ASM9260_HW_ICOLL_RAW1				0x0050
+
+#define ASM9260_HW_ICOLL_INTERRUPT0			0x0060
+#define ASM9260_HW_ICOLL_INTERRUPTn(n)		(0x0060 + ((n) >> 2) * 0x10)
+/*
+ * WARNING: Modifying the priority of an enabled interrupt may result in
+ * undefined behavior.
+ */
+#define ASM9260_BM_INT_PRIORITY_MASK			0x3
+#define ASM9260_BM_INT_ENABLE				BIT(2)
+#define ASM9260_BM_INT_SOFTIRQ				BIT(3)
+
+#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)		(((n) & 0x3) << 3)
+#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n)		(1 << (2 + \
+			ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)))
+
+#define ASM9260_HW_ICOLL_VBASE				0x0160
+/*
+ * bits 31:2
+ * This bitfield holds the upper 30 bits of the base address of the vector
+ * table.
+ */
+
+#define ASM9260_HW_ICOLL_CLEAR0				0x01d0
+#define ASM9260_HW_ICOLL_CLEAR1				0x01e0
+#define ASM9260_HW_ICOLL_CLEARn(n)			(((n >> 5) * 0x10) \
+							+ SET_REG)
+#define ASM9260_BM_CLEAR_BIT(n)				BIT(n & 0x1f)
+
+/* Scratchpad */
+#define ASM9260_HW_ICOLL_UNDEF_VECTOR			0x01f0
+#endif
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 14374de..1470087 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -1,5 +1,7 @@
 /*
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *	Add Alphascale ASM9260 support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +30,8 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+#include "alphascale_asm9260-icoll.h"
+
 /*
  * this device provide 4 offsets for each register:
  * 0x0 - plain read write mode
@@ -49,6 +53,11 @@
 
 #define ICOLL_NUM_IRQS		128
 
+enum icoll_type {
+	ICOLL,
+	ASM9260_ICOLL,
+};
+
 struct icoll_priv {
 	void __iomem *vector;
 	void __iomem *levelack;
@@ -58,10 +67,38 @@ struct icoll_priv {
 	/* number of interrupts per register */
 	int intr_per_reg;
 	void __iomem *clear;
+	enum icoll_type type;
 };
 
 static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
+static DEFINE_RAW_SPINLOCK(icoll_lock);
+
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * We expect intr_per_reg to be 4 or 1, it means
+	 * "n" will be 3 or 0.
+	 */
+	int n = icoll_priv.intr_per_reg - 1;
+
+	/*
+	 * If n = 0, "bit" is never shifted.
+	 * If n = 3, mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & n) << n);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	int n = icoll_priv.intr_per_reg >> 1;
+
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> n) * 0x10);
+}
 
 static void icoll_ack_irq(struct irq_data *d)
 {
@@ -86,12 +123,38 @@ static void icoll_unmask_irq(struct irq_data *d)
 			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
+static void asm9260_mask_irq(struct irq_data *d)
+{
+	raw_spin_lock(&icoll_lock);
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
+	raw_spin_unlock(&icoll_lock);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+	raw_spin_lock(&icoll_lock);
+	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+		     icoll_priv.clear +
+		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+	raw_spin_unlock(&icoll_lock);
+}
+
 static struct irq_chip mxs_icoll_chip = {
 	.irq_ack = icoll_ack_irq,
 	.irq_mask = icoll_mask_irq,
 	.irq_unmask = icoll_unmask_irq,
 };
 
+static struct irq_chip asm9260_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = asm9260_mask_irq,
+	.irq_unmask = asm9260_unmask_irq,
+};
+
 asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
@@ -104,7 +167,14 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
 				irq_hw_number_t hw)
 {
-	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	struct irq_chip *chip;
+
+	if (icoll_priv.type == ICOLL)
+		chip = &mxs_icoll_chip;
+	else
+		chip = &asm9260_icoll_chip;
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
 	set_irq_flags(virq, IRQF_VALID);
 
 	return 0;
@@ -142,6 +212,8 @@ static int __init icoll_of_init(struct device_node *np,
 {
 	void __iomem *icoll_base;
 
+	icoll_priv.type = ICOLL;
+
 	icoll_base		= icoll_init_iobase(np);
 	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
 	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
@@ -162,3 +234,35 @@ static int __init icoll_of_init(struct device_node *np,
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+	int i;
+
+	icoll_priv.type = ASM9260_ICOLL;
+
+	icoll_base = icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + ASM9260_HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + ASM9260_HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+	icoll_priv.intr_per_reg	= 4;
+	icoll_priv.clear	= icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+	writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+			icoll_priv.ctrl);
+	/*
+	 * ASM9260 don't provide reset bit. So, we need to set level 0
+	 * manually.
+	 */
+	for (i = 0; i < 16 * 0x10; i += 0x10)
+		writel(0, icoll_priv.intr + i);
+
+	icoll_add_domain(np, ASM9260_NUM_IRQS);
+
+	return icoll_domain ? 0 : -ENODEV;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);
-- 
2.5.0

Re: Possible Spam [PATCH v2 2/2] ARM: irqchip: mxs: add Alpascale ASM9260 support

[Marc Zyngier]

On Fri, 18 Sep 2015 11:18:42 +0200
Oleksij Rempel <linux@rempel-privat.de> wrote:

> From: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>
> 
> Freescale iMX23/iMX28 and Alphascale ASM9260 have similar

Is it Alphascale or Alpascale? You may need to fix the patch title.

> interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260.
> Differences between this devices are fallowing:
> - different register offsets
> - different count of intterupt lines per register
> - ASM9260 don't provide reset bit
> - ASM9260 don't support FIQ.
> 
> Signed-off-by: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>
> ---
>  drivers/irqchip/Kconfig                    |   5 ++
>  drivers/irqchip/Makefile                   |   2 +-
>  drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
>  drivers/irqchip/irq-mxs.c                  | 106 +++++++++++++++++++++++++++-
>  4 files changed, 220 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h
> 

[...]

> diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
> index 14374de..1470087 100644
> --- a/drivers/irqchip/irq-mxs.c
> +++ b/drivers/irqchip/irq-mxs.c
> @@ -1,5 +1,7 @@
>  /*
>   * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
> + * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
> + *	Add Alphascale ASM9260 support.
>   *
>   * This program is free software; you can redistribute it and/or modify
>   * it under the terms of the GNU General Public License as published by
> @@ -28,6 +30,8 @@
>  #include <linux/stmp_device.h>
>  #include <asm/exception.h>
>  
> +#include "alphascale_asm9260-icoll.h"
> +
>  /*
>   * this device provide 4 offsets for each register:
>   * 0x0 - plain read write mode
> @@ -49,6 +53,11 @@
>  
>  #define ICOLL_NUM_IRQS		128
>  
> +enum icoll_type {
> +	ICOLL,
> +	ASM9260_ICOLL,
> +};
> +
>  struct icoll_priv {
>  	void __iomem *vector;
>  	void __iomem *levelack;
> @@ -58,10 +67,38 @@ struct icoll_priv {
>  	/* number of interrupts per register */
>  	int ;
>  	void __iomem *clear;
> +	enum icoll_type type;
>  };
>  
>  static struct icoll_priv icoll_priv;
>  static struct irq_domain *icoll_domain;
> +static DEFINE_RAW_SPINLOCK(icoll_lock);
> +
> +/* calculate bit offset depending on number of intterupt per register */
> +static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
> +{
> +	/*
> +	 * We expect intr_per_reg to be 4 or 1, it means
> +	 * "n" will be 3 or 0.
> +	 */
> +	int n = icoll_priv.intr_per_reg - 1;
> +
> +	/*
> +	 * If n = 0, "bit" is never shifted.
> +	 * If n = 3, mask lower part of hwirq to convert it
> +	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
> +	 */
> +	return bit << ((d->hwirq & n) << n);
> +}
> +
> +/* calculate mem offset depending on number of intterupt per register */
> +static void __iomem *icoll_intr_reg(struct irq_data *d)
> +{
> +	int n = icoll_priv.intr_per_reg >> 1;
> +
> +	/* offset = hwirq / intr_per_reg * 0x10 */
> +	return icoll_priv.intr + ((d->hwirq >> n) * 0x10);
> +}

Please correct me if I'm wrong, but it looks like these function are
only useful when used on ams9260. So why do we need intr_per_reg at
all? MXS doesn't need it (always 1), and ams9260 always need it (always
4). Save yourself some previous cycles and simplify the whole thing.

>  
>  static void icoll_ack_irq(struct irq_data *d)
>  {
> @@ -86,12 +123,38 @@ static void icoll_unmask_irq(struct irq_data *d)
>  			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
>  }
>  
> +static void asm9260_mask_irq(struct irq_data *d)
> +{
> +	raw_spin_lock(&icoll_lock);
> +	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
> +			icoll_intr_reg(d) + CLR_REG);
> +	raw_spin_unlock(&icoll_lock);
> +}
> +
> +static void asm9260_unmask_irq(struct irq_data *d)
> +{
> +	raw_spin_lock(&icoll_lock);
> +	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
> +		     icoll_priv.clear +
> +		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
> +
> +	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
> +			icoll_intr_reg(d) + SET_REG);
> +	raw_spin_unlock(&icoll_lock);
> +}

Can you please explain the rational for this lock? mask/unmask use
different registers, and it is not obvious to me what race you are
trying to avoid here.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny.

Re: Possible Spam [PATCH v2 2/2] ARM: irqchip: mxs: add Alpascale ASM9260 support

[Oleksij Rempel]

[-- Attachment #1: Type: text/plain, Size: 4844 bytes --]

Am 18.09.2015 um 12:42 schrieb Marc Zyngier:
> On Fri, 18 Sep 2015 11:18:42 +0200
> Oleksij Rempel <linux@rempel-privat.de> wrote:
> 
>> From: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>
>>
>> Freescale iMX23/iMX28 and Alphascale ASM9260 have similar
> 
> Is it Alphascale or Alpascale? You may need to fix the patch title.

ok.

> 
>> interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260.
>> Differences between this devices are fallowing:
>> - different register offsets
>> - different count of intterupt lines per register
>> - ASM9260 don't provide reset bit
>> - ASM9260 don't support FIQ.
>>
>> Signed-off-by: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>
>> ---
>>  drivers/irqchip/Kconfig                    |   5 ++
>>  drivers/irqchip/Makefile                   |   2 +-
>>  drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
>>  drivers/irqchip/irq-mxs.c                  | 106 +++++++++++++++++++++++++++-
>>  4 files changed, 220 insertions(+), 2 deletions(-)
>>  create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h
>>
> 
> [...]
> 
>> diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
>> index 14374de..1470087 100644
>> --- a/drivers/irqchip/irq-mxs.c
>> +++ b/drivers/irqchip/irq-mxs.c
>> @@ -1,5 +1,7 @@
>>  /*
>>   * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
>> + * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
>> + *	Add Alphascale ASM9260 support.
>>   *
>>   * This program is free software; you can redistribute it and/or modify
>>   * it under the terms of the GNU General Public License as published by
>> @@ -28,6 +30,8 @@
>>  #include <linux/stmp_device.h>
>>  #include <asm/exception.h>
>>  
>> +#include "alphascale_asm9260-icoll.h"
>> +
>>  /*
>>   * this device provide 4 offsets for each register:
>>   * 0x0 - plain read write mode
>> @@ -49,6 +53,11 @@
>>  
>>  #define ICOLL_NUM_IRQS		128
>>  
>> +enum icoll_type {
>> +	ICOLL,
>> +	ASM9260_ICOLL,
>> +};
>> +
>>  struct icoll_priv {
>>  	void __iomem *vector;
>>  	void __iomem *levelack;
>> @@ -58,10 +67,38 @@ struct icoll_priv {
>>  	/* number of interrupts per register */
>>  	int ;
>>  	void __iomem *clear;
>> +	enum icoll_type type;
>>  };
>>  
>>  static struct icoll_priv icoll_priv;
>>  static struct irq_domain *icoll_domain;
>> +static DEFINE_RAW_SPINLOCK(icoll_lock);
>> +
>> +/* calculate bit offset depending on number of intterupt per register */
>> +static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
>> +{
>> +	/*
>> +	 * We expect intr_per_reg to be 4 or 1, it means
>> +	 * "n" will be 3 or 0.
>> +	 */
>> +	int n = icoll_priv.intr_per_reg - 1;
>> +
>> +	/*
>> +	 * If n = 0, "bit" is never shifted.
>> +	 * If n = 3, mask lower part of hwirq to convert it
>> +	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
>> +	 */
>> +	return bit << ((d->hwirq & n) << n);
>> +}
>> +
>> +/* calculate mem offset depending on number of intterupt per register */
>> +static void __iomem *icoll_intr_reg(struct irq_data *d)
>> +{
>> +	int n = icoll_priv.intr_per_reg >> 1;
>> +
>> +	/* offset = hwirq / intr_per_reg * 0x10 */
>> +	return icoll_priv.intr + ((d->hwirq >> n) * 0x10);
>> +}
> 
> Please correct me if I'm wrong, but it looks like these function are
> only useful when used on ams9260. So why do we need intr_per_reg at
> all? MXS doesn't need it (always 1), and ams9260 always need it (always
> 4). Save yourself some previous cycles and simplify the whole thing.

ok.

>>  
>>  static void icoll_ack_irq(struct irq_data *d)
>>  {
>> @@ -86,12 +123,38 @@ static void icoll_unmask_irq(struct irq_data *d)
>>  			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
>>  }
>>  
>> +static void asm9260_mask_irq(struct irq_data *d)
>> +{
>> +	raw_spin_lock(&icoll_lock);
>> +	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
>> +			icoll_intr_reg(d) + CLR_REG);
>> +	raw_spin_unlock(&icoll_lock);
>> +}
>> +
>> +static void asm9260_unmask_irq(struct irq_data *d)
>> +{
>> +	raw_spin_lock(&icoll_lock);
>> +	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
>> +		     icoll_priv.clear +
>> +		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
>> +
>> +	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
>> +			icoll_intr_reg(d) + SET_REG);
>> +	raw_spin_unlock(&icoll_lock);
>> +}
> 
> Can you please explain the rational for this lock? mask/unmask use
> different registers, and it is not obvious to me what race you are
> trying to avoid here.

Uff... in one of earliest reviews i was asked to add lock..
I also was asked to add asm9260 to some existing driver. Not sure if it
is still making sense.

-- 
Regards,
Oleksij


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 213 bytes --]

Re: [PATCH v2 2/2] ARM: irqchip: mxs: add Alpascale ASM9260 support

[Marc Zyngier]

On Sat, 19 Sep 2015 07:53:34 +0200
Oleksij Rempel <linux@rempel-privat.de> wrote:

> Am 18.09.2015 um 12:42 schrieb Marc Zyngier:
> > On Fri, 18 Sep 2015 11:18:42 +0200
> > Oleksij Rempel <linux@rempel-privat.de> wrote:
>

[...]

> >> +static void asm9260_mask_irq(struct irq_data *d)
> >> +{
> >> +	raw_spin_lock(&icoll_lock);
> >> +	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
> >> +			icoll_intr_reg(d) + CLR_REG);
> >> +	raw_spin_unlock(&icoll_lock);
> >> +}
> >> +
> >> +static void asm9260_unmask_irq(struct irq_data *d)
> >> +{
> >> +	raw_spin_lock(&icoll_lock);
> >> +	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
> >> +		     icoll_priv.clear +
> >> +		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
> >> +
> >> +	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
> >> +			icoll_intr_reg(d) + SET_REG);
> >> +	raw_spin_unlock(&icoll_lock);
> >> +}
> > 
> > Can you please explain the rational for this lock? mask/unmask use
> > different registers, and it is not obvious to me what race you are
> > trying to avoid here.
> 
> Uff... in one of earliest reviews i was asked to add lock..
> I also was asked to add asm9260 to some existing driver. Not sure if it
> is still making sense.

Adding or removing a lock is not about what people ask you to do. It is
about requirements dictated by either the HW (you need to perform
a given sequence atomically with respect to another code sequence), the
kernel, or both. So I'd like to understand what is the underlying
reason for this lock. It is not disabling interrupts, so it could end
up being called in an interrupt context -> deadlock.

So either the HW requires it and you have the wrong accessors, or it
doesn't, and you can remove it. Either way, we need to know.

	M.
-- 
Jazz is not dead. It just smells funny.

Re: [PATCH v2 2/2] ARM: irqchip: mxs: add Alpascale ASM9260 support

[Oleksij Rempel]

[-- Attachment #1: Type: text/plain, Size: 1959 bytes --]

Am 20.09.2015 um 13:28 schrieb Marc Zyngier:
> On Sat, 19 Sep 2015 07:53:34 +0200
> Oleksij Rempel <linux@rempel-privat.de> wrote:
> 
>> Am 18.09.2015 um 12:42 schrieb Marc Zyngier:
>>> On Fri, 18 Sep 2015 11:18:42 +0200
>>> Oleksij Rempel <linux@rempel-privat.de> wrote:
>>
> 
> [...]
> 
>>>> +static void asm9260_mask_irq(struct irq_data *d)
>>>> +{
>>>> +	raw_spin_lock(&icoll_lock);
>>>> +	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
>>>> +			icoll_intr_reg(d) + CLR_REG);
>>>> +	raw_spin_unlock(&icoll_lock);
>>>> +}
>>>> +
>>>> +static void asm9260_unmask_irq(struct irq_data *d)
>>>> +{
>>>> +	raw_spin_lock(&icoll_lock);
>>>> +	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
>>>> +		     icoll_priv.clear +
>>>> +		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
>>>> +
>>>> +	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
>>>> +			icoll_intr_reg(d) + SET_REG);
>>>> +	raw_spin_unlock(&icoll_lock);
>>>> +}
>>>
>>> Can you please explain the rational for this lock? mask/unmask use
>>> different registers, and it is not obvious to me what race you are
>>> trying to avoid here.
>>
>> Uff... in one of earliest reviews i was asked to add lock..
>> I also was asked to add asm9260 to some existing driver. Not sure if it
>> is still making sense.
> 
> Adding or removing a lock is not about what people ask you to do. It is
> about requirements dictated by either the HW (you need to perform
> a given sequence atomically with respect to another code sequence), the
> kernel, or both. So I'd like to understand what is the underlying
> reason for this lock. It is not disabling interrupts, so it could end
> up being called in an interrupt context -> deadlock.

You right.

> So either the HW requires it and you have the wrong accessors, or it
> doesn't, and you can remove it. Either way, we need to know.
> 
> 	M.

I don't see any need to lock it.

-- 
Regards,
Oleksij


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 213 bytes --]

Re: [PATCH v2 2/2] ARM: irqchip: mxs: add Alpascale ASM9260 support

[Thomas Gleixner]

On Sun, 20 Sep 2015, Marc Zyngier wrote:
> > Uff... in one of earliest reviews i was asked to add lock..
> > I also was asked to add asm9260 to some existing driver. Not sure if it
> > is still making sense.
> 
> Adding or removing a lock is not about what people ask you to do. It is
> about requirements dictated by either the HW (you need to perform
> a given sequence atomically with respect to another code sequence), the
> kernel, or both. So I'd like to understand what is the underlying
> reason for this lock. It is not disabling interrupts, so it could end
> up being called in an interrupt context -> deadlock.

The callback is always called with interrupts disabled, so that's a
non issue. But still, the rationale for that lock is unclear.

Thanks,

	tglx

 

[PATCH v3 0/2] Add support for ASM9260 interrupt controller

[Oleksij Rempel]

v2:
- move icoll_init_iobasea and icoll_add_domain to preparation patch
- add enum icoll_type
- make separate irq_chip for ICOLL and ASM9260 

v3:
- fix typo in subject: Alp_h_ascale
- remove "intr_per_reg", it is not used any more. It will also
	save some CPU cycles
- remove spin locks. It was a bad idea.

Oleksij Rempel (2):
  ARM: irqchip: mxs: prepare driver for HW with different offsets
  ARM: irqchip: mxs: add Alphascale ASM9260 support

 drivers/irqchip/Kconfig                    |   5 +
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 ++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  | 171 ++++++++++++++++++++++++++---
 4 files changed, 269 insertions(+), 18 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

-- 
2.5.0

[PATCH v3 1/2] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Oleksij Rempel]

Some HW has similar functionality but different register offsets.
Make sure we can change offsets dynamically.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/irq-mxs.c | 83 ++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 67 insertions(+), 16 deletions(-)

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 1faf812..14374de 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -28,18 +28,39 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
 #define HW_ICOLL_STAT_OFFSET			0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define HW_ICOLL_INTERRUPT0			0x0120
+#define HW_ICOLL_INTERRUPTn(n)			((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE			BIT(2)
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
 #define ICOLL_NUM_IRQS		128
 
-static void __iomem *icoll_base;
+struct icoll_priv {
+	void __iomem *vector;
+	void __iomem *levelack;
+	void __iomem *ctrl;
+	void __iomem *stat;
+	void __iomem *intr;
+	/* number of interrupts per register */
+	int intr_per_reg;
+	void __iomem *clear;
+};
+
+static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
@@ -50,19 +71,19 @@ static void icoll_ack_irq(struct irq_data *d)
 	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
 	 */
 	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
-			icoll_base + HW_ICOLL_LEVELACK);
+			icoll_priv.levelack);
 }
 
 static void icoll_mask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -75,8 +96,8 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
 
-	irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
-	__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+	irqnr = __raw_readl(icoll_priv.stat);
+	__raw_writel(irqnr, icoll_priv.vector);
 	handle_domain_irq(icoll_domain, irqnr, regs);
 }
 
@@ -94,20 +115,50 @@ static const struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
+static void __init icoll_add_domain(struct device_node *np,
+			  int num)
+{
+	icoll_domain = irq_domain_add_linear(np, num,
+					     &icoll_irq_domain_ops, NULL);
+
+	if (!icoll_domain)
+		panic("%s: unable add irq domain", np->full_name);
+	irq_set_default_host(icoll_domain);
+	set_handle_irq(icoll_handle_irq);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
+{
+	void __iomem *icoll_base;
+
+	icoll_base = of_io_request_and_map(np, 0, np->name);
+	if (!icoll_base)
+		panic("%s: unable to map resource", np->full_name);
+	return icoll_base;
+}
+
 static int __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
-	icoll_base = of_iomap(np, 0);
-	WARN_ON(!icoll_base);
+	void __iomem *icoll_base;
+
+	icoll_base		= icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
+	icoll_priv.intr_per_reg	= 1;
+	icoll_priv.clear	= NULL;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
-	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+	stmp_reset_block(icoll_priv.ctrl);
+
+	icoll_add_domain(np, ICOLL_NUM_IRQS);
 
-	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
-					     &icoll_irq_domain_ops, NULL);
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
-- 
2.5.0

[PATCH v3 2/2] ARM: irqchip: mxs: add Alphascale ASM9260 support

[Oleksij Rempel]

From: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>

Freescale iMX23/iMX28 and Alphascale ASM9260 have similar
interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260.
Differences between this devices are fallowing:
- different register offsets
- different count of intterupt lines per register
- ASM9260 don't provide reset bit
- ASM9260 don't support FIQ.

Signed-off-by: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>
---
 drivers/irqchip/Kconfig                    |   5 ++
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  |  94 +++++++++++++++++++++++--
 4 files changed, 205 insertions(+), 5 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 27b52c8..0dfd840 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -187,3 +187,8 @@ config IMX_GPCV2
 	select IRQ_DOMAIN
 	help
 	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
+config IRQ_MXS
+	def_bool y if MACH_ASM9260 || ARCH_MXS
+	select IRQ_DOMAIN
+	select STMP_DEVICE
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bb3048f..177f78f 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
-obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
+obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
diff --git a/drivers/irqchip/alphascale_asm9260-icoll.h b/drivers/irqchip/alphascale_asm9260-icoll.h
new file mode 100644
index 0000000..5cec108
--- /dev/null
+++ b/drivers/irqchip/alphascale_asm9260-icoll.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ALPHASCALE_ASM9260_ICOLL_H
+#define _ALPHASCALE_ASM9260_ICOLL_H
+
+#define ASM9260_NUM_IRQS		64
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+
+#define ASM9260_HW_ICOLL_VECTOR				0x0000
+/*
+ * bits 31:2
+ * This register presents the vector address for the interrupt currently
+ * active on the CPU IRQ input. Writing to this register notifies the
+ * interrupt collector that the interrupt service routine for the current
+ * interrupt has been entered.
+ * The exception trap should have a LDPC instruction from this address:
+ * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018
+ */
+
+/*
+ * The Interrupt Collector Level Acknowledge Register is used by software to
+ * indicate the completion of an interrupt on a specific level.
+ * This register is written at the very end of an interrupt service routine. If
+ * nesting is used then the CPU irq must be turned on before writing to this
+ * register to avoid a race condition in the CPU interrupt hardware.
+ */
+#define ASM9260_HW_ICOLL_LEVELACK			0x0010
+#define ASM9260_BM_LEVELn(nr)				BIT(nr)
+
+#define ASM9260_HW_ICOLL_CTRL				0x0020
+/*
+ * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on
+ * asm9260.
+ */
+#define ASM9260_BM_CTRL_SFTRST				BIT(31)
+#define ASM9260_BM_CTRL_CLKGATE				BIT(30)
+/* disable interrupt level nesting */
+#define ASM9260_BM_CTRL_NO_NESTING			BIT(19)
+/*
+ * Set this bit to one enable the RISC32-style read side effect associated with
+ * the vector address register. In this mode, interrupt in-service is signaled
+ * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt
+ * vector address. Set this bit to zero for normal operation, in which the ISR
+ * signals in-service explicitly by means of a write to the
+ * ASM9260_HW_ICOLL_VECTOR register.
+ * 0 - Must Write to Vector register to go in-service.
+ * 1 - Go in-service as a read side effect
+ */
+#define ASM9260_BM_CTRL_ARM_RSE_MODE			BIT(18)
+#define ASM9260_BM_CTRL_IRQ_ENABLE			BIT(16)
+
+#define ASM9260_HW_ICOLL_STAT_OFFSET			0x0030
+/*
+ * bits 5:0
+ * Vector number of current interrupt. Multiply by 4 and add to vector base
+ * address to obtain the value in ASM9260_HW_ICOLL_VECTOR.
+ */
+
+/*
+ * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines
+ * coming from various parts of the chip. Its purpose is to improve diagnostic
+ * observability.
+ */
+#define ASM9260_HW_ICOLL_RAW0				0x0040
+#define ASM9260_HW_ICOLL_RAW1				0x0050
+
+#define ASM9260_HW_ICOLL_INTERRUPT0			0x0060
+#define ASM9260_HW_ICOLL_INTERRUPTn(n)		(0x0060 + ((n) >> 2) * 0x10)
+/*
+ * WARNING: Modifying the priority of an enabled interrupt may result in
+ * undefined behavior.
+ */
+#define ASM9260_BM_INT_PRIORITY_MASK			0x3
+#define ASM9260_BM_INT_ENABLE				BIT(2)
+#define ASM9260_BM_INT_SOFTIRQ				BIT(3)
+
+#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)		(((n) & 0x3) << 3)
+#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n)		(1 << (2 + \
+			ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)))
+
+#define ASM9260_HW_ICOLL_VBASE				0x0160
+/*
+ * bits 31:2
+ * This bitfield holds the upper 30 bits of the base address of the vector
+ * table.
+ */
+
+#define ASM9260_HW_ICOLL_CLEAR0				0x01d0
+#define ASM9260_HW_ICOLL_CLEAR1				0x01e0
+#define ASM9260_HW_ICOLL_CLEARn(n)			(((n >> 5) * 0x10) \
+							+ SET_REG)
+#define ASM9260_BM_CLEAR_BIT(n)				BIT(n & 0x1f)
+
+/* Scratchpad */
+#define ASM9260_HW_ICOLL_UNDEF_VECTOR			0x01f0
+#endif
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 14374de..88c2bcd 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -1,5 +1,7 @@
 /*
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *	Add Alphascale ASM9260 support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +30,8 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+#include "alphascale_asm9260-icoll.h"
+
 /*
  * this device provide 4 offsets for each register:
  * 0x0 - plain read write mode
@@ -49,20 +53,41 @@
 
 #define ICOLL_NUM_IRQS		128
 
+enum icoll_type {
+	ICOLL,
+	ASM9260_ICOLL,
+};
+
 struct icoll_priv {
 	void __iomem *vector;
 	void __iomem *levelack;
 	void __iomem *ctrl;
 	void __iomem *stat;
 	void __iomem *intr;
-	/* number of interrupts per register */
-	int intr_per_reg;
 	void __iomem *clear;
+	enum icoll_type type;
 };
 
 static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & 3) << 3);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> 2) * 0x10);
+}
+
 static void icoll_ack_irq(struct irq_data *d)
 {
 	/*
@@ -86,12 +111,34 @@ static void icoll_unmask_irq(struct irq_data *d)
 			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
+static void asm9260_mask_irq(struct irq_data *d)
+{
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+		     icoll_priv.clear +
+		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+}
+
 static struct irq_chip mxs_icoll_chip = {
 	.irq_ack = icoll_ack_irq,
 	.irq_mask = icoll_mask_irq,
 	.irq_unmask = icoll_unmask_irq,
 };
 
+static struct irq_chip asm9260_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = asm9260_mask_irq,
+	.irq_unmask = asm9260_unmask_irq,
+};
+
 asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
@@ -104,7 +151,14 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
 				irq_hw_number_t hw)
 {
-	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	struct irq_chip *chip;
+
+	if (icoll_priv.type == ICOLL)
+		chip = &mxs_icoll_chip;
+	else
+		chip = &asm9260_icoll_chip;
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
 	set_irq_flags(virq, IRQF_VALID);
 
 	return 0;
@@ -142,13 +196,14 @@ static int __init icoll_of_init(struct device_node *np,
 {
 	void __iomem *icoll_base;
 
+	icoll_priv.type = ICOLL;
+
 	icoll_base		= icoll_init_iobase(np);
 	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
 	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
 	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
 	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
 	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
-	icoll_priv.intr_per_reg	= 1;
 	icoll_priv.clear	= NULL;
 
 	/*
@@ -162,3 +217,34 @@ static int __init icoll_of_init(struct device_node *np,
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+	int i;
+
+	icoll_priv.type = ASM9260_ICOLL;
+
+	icoll_base = icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + ASM9260_HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + ASM9260_HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+	writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+			icoll_priv.ctrl);
+	/*
+	 * ASM9260 don't provide reset bit. So, we need to set level 0
+	 * manually.
+	 */
+	for (i = 0; i < 16 * 0x10; i += 0x10)
+		writel(0, icoll_priv.intr + i);
+
+	icoll_add_domain(np, ASM9260_NUM_IRQS);
+
+	return icoll_domain ? 0 : -ENODEV;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);
-- 
2.5.0

Re: [PATCH v3 2/2] ARM: irqchip: mxs: add Alphascale ASM9260 support

[Thomas Gleixner]

On Mon, 21 Sep 2015, Oleksij Rempel wrote:
>  static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
>  				irq_hw_number_t hw)
>  {
> -	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
> +	struct irq_chip *chip;
> +
> +	if (icoll_priv.type == ICOLL)
> +		chip = &mxs_icoll_chip;
> +	else
> +		chip = &asm9260_icoll_chip;
> +
> +	irq_set_chip_and_handler(virq, chip, handle_level_irq);
>  	set_irq_flags(virq, IRQF_VALID);

set_irq_flags() is gone. Please redo against 4.3-rc2

Thanks,

	tglx

[PATCH v4 0/2] Add support for ASM9260 interrupt controller

[Oleksij Rempel]

v2:
- move icoll_init_iobasea and icoll_add_domain to preparation patch
- add enum icoll_type
- make separate irq_chip for ICOLL and ASM9260 

v3:
- fix typo in subject: Alp_h_ascale
- remove "intr_per_reg", it is not used any more. It will also
	save some CPU cycles
- remove spin locks. It was a bad idea.

v4:
- remove set_irq_flags()

Oleksij Rempel (2):
  ARM: irqchip: mxs: prepare driver for HW with different offsets
  ARM: irqchip: mxs: add Alphascale ASM9260 support

 drivers/irqchip/Kconfig                    |   5 +
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 ++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  | 171 ++++++++++++++++++++++++++---
 4 files changed, 269 insertions(+), 18 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

-- 
2.5.0

[PATCH v4 1/2] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Oleksij Rempel]

Some HW has similar functionality but different register offsets.
Make sure we can change offsets dynamically.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/irq-mxs.c | 83 ++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 67 insertions(+), 16 deletions(-)

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 604df63..a8e14c3 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -28,18 +28,39 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
 #define HW_ICOLL_STAT_OFFSET			0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define HW_ICOLL_INTERRUPT0			0x0120
+#define HW_ICOLL_INTERRUPTn(n)			((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE			BIT(2)
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
 #define ICOLL_NUM_IRQS		128
 
-static void __iomem *icoll_base;
+struct icoll_priv {
+	void __iomem *vector;
+	void __iomem *levelack;
+	void __iomem *ctrl;
+	void __iomem *stat;
+	void __iomem *intr;
+	/* number of interrupts per register */
+	int intr_per_reg;
+	void __iomem *clear;
+};
+
+static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
@@ -50,19 +71,19 @@ static void icoll_ack_irq(struct irq_data *d)
 	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
 	 */
 	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
-			icoll_base + HW_ICOLL_LEVELACK);
+			icoll_priv.levelack);
 }
 
 static void icoll_mask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -75,8 +96,8 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
 
-	irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
-	__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+	irqnr = __raw_readl(icoll_priv.stat);
+	__raw_writel(irqnr, icoll_priv.vector);
 	handle_domain_irq(icoll_domain, irqnr, regs);
 }
 
@@ -93,20 +114,50 @@ static const struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
+static void __init icoll_add_domain(struct device_node *np,
+			  int num)
+{
+	icoll_domain = irq_domain_add_linear(np, num,
+					     &icoll_irq_domain_ops, NULL);
+
+	if (!icoll_domain)
+		panic("%s: unable add irq domain", np->full_name);
+	irq_set_default_host(icoll_domain);
+	set_handle_irq(icoll_handle_irq);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
+{
+	void __iomem *icoll_base;
+
+	icoll_base = of_io_request_and_map(np, 0, np->name);
+	if (!icoll_base)
+		panic("%s: unable to map resource", np->full_name);
+	return icoll_base;
+}
+
 static int __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
-	icoll_base = of_iomap(np, 0);
-	WARN_ON(!icoll_base);
+	void __iomem *icoll_base;
+
+	icoll_base		= icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
+	icoll_priv.intr_per_reg	= 1;
+	icoll_priv.clear	= NULL;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
-	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+	stmp_reset_block(icoll_priv.ctrl);
+
+	icoll_add_domain(np, ICOLL_NUM_IRQS);
 
-	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
-					     &icoll_irq_domain_ops, NULL);
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
-- 
2.5.0

Re: [PATCH v4 1/2] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Thomas Gleixner]

On Wed, 23 Sep 2015, Oleksij Rempel wrote:

Subject: irqchip/mxs: ..... Please

> +struct icoll_priv {
> +	void __iomem *vector;
> +	void __iomem *levelack;
> +	void __iomem *ctrl;
> +	void __iomem *stat;
> +	void __iomem *intr;
> +	/* number of interrupts per register */
> +	int intr_per_reg;

Why are you adding this here just to remove it in the next patch?

> +	void __iomem *clear;

Please do not add members which are not required for the preparatory
step.

Thanks,

	tglx

[PATCH v5 0/2] Add support for ASM9260 interrupt controller

[Oleksij Rempel]

v2:
- move icoll_init_iobasea and icoll_add_domain to preparation patch
- add enum icoll_type
- make separate irq_chip for ICOLL and ASM9260 

v3:
- fix typo in subject: Alp_h_ascale
- remove "intr_per_reg", it is not used any more. It will also
	save some CPU cycles
- remove spin locks. It was a bad idea.

v4:
- remove set_irq_flags()

v5:
- remove intr_per_reg from first patch
- move *clear to second patch

Oleksij Rempel (2):
  ARM: irqchip: mxs: prepare driver for HW with different offsets
  ARM: irqchip: mxs: add Alphascale ASM9260 support

 drivers/irqchip/Kconfig                    |   5 +
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 ++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  | 171 ++++++++++++++++++++++++++---
 4 files changed, 269 insertions(+), 18 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

-- 
2.5.0

[PATCH v5 1/2] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Oleksij Rempel]

Some HW has similar functionality but different register offsets.
Make sure we can change offsets dynamically.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/irq-mxs.c | 78 +++++++++++++++++++++++++++++++++++++----------
 1 file changed, 62 insertions(+), 16 deletions(-)

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 1faf812..1ed759b 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -28,18 +28,36 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
 #define HW_ICOLL_STAT_OFFSET			0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define HW_ICOLL_INTERRUPT0			0x0120
+#define HW_ICOLL_INTERRUPTn(n)			((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE			BIT(2)
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
 #define ICOLL_NUM_IRQS		128
 
-static void __iomem *icoll_base;
+struct icoll_priv {
+	void __iomem *vector;
+	void __iomem *levelack;
+	void __iomem *ctrl;
+	void __iomem *stat;
+	void __iomem *intr;
+};
+
+static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
@@ -50,19 +68,19 @@ static void icoll_ack_irq(struct irq_data *d)
 	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
 	 */
 	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
-			icoll_base + HW_ICOLL_LEVELACK);
+			icoll_priv.levelack);
 }
 
 static void icoll_mask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -75,8 +93,8 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
 
-	irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
-	__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+	irqnr = __raw_readl(icoll_priv.stat);
+	__raw_writel(irqnr, icoll_priv.vector);
 	handle_domain_irq(icoll_domain, irqnr, regs);
 }
 
@@ -94,20 +112,48 @@ static const struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
+static void __init icoll_add_domain(struct device_node *np,
+			  int num)
+{
+	icoll_domain = irq_domain_add_linear(np, num,
+					     &icoll_irq_domain_ops, NULL);
+
+	if (!icoll_domain)
+		panic("%s: unable add irq domain", np->full_name);
+	irq_set_default_host(icoll_domain);
+	set_handle_irq(icoll_handle_irq);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
+{
+	void __iomem *icoll_base;
+
+	icoll_base = of_io_request_and_map(np, 0, np->name);
+	if (!icoll_base)
+		panic("%s: unable to map resource", np->full_name);
+	return icoll_base;
+}
+
 static int __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
-	icoll_base = of_iomap(np, 0);
-	WARN_ON(!icoll_base);
+	void __iomem *icoll_base;
+
+	icoll_base		= icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
-	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+	stmp_reset_block(icoll_priv.ctrl);
+
+	icoll_add_domain(np, ICOLL_NUM_IRQS);
 
-	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
-					     &icoll_irq_domain_ops, NULL);
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
-- 
2.5.0

[PATCH v5 2/2] ARM: irqchip: mxs: add Alphascale ASM9260 support

[Oleksij Rempel]

Freescale iMX23/iMX28 and Alphascale ASM9260 have similar
interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260.
Differences between this devices are fallowing:
- different register offsets
- different count of intterupt lines per register
- ASM9260 don't provide reset bit
- ASM9260 don't support FIQ.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/Kconfig                    |   5 ++
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  |  93 +++++++++++++++++++++++-
 4 files changed, 207 insertions(+), 2 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 27b52c8..0dfd840 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -187,3 +187,8 @@ config IMX_GPCV2
 	select IRQ_DOMAIN
 	help
 	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
+config IRQ_MXS
+	def_bool y if MACH_ASM9260 || ARCH_MXS
+	select IRQ_DOMAIN
+	select STMP_DEVICE
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bb3048f..177f78f 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
-obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
+obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
diff --git a/drivers/irqchip/alphascale_asm9260-icoll.h b/drivers/irqchip/alphascale_asm9260-icoll.h
new file mode 100644
index 0000000..5cec108
--- /dev/null
+++ b/drivers/irqchip/alphascale_asm9260-icoll.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ALPHASCALE_ASM9260_ICOLL_H
+#define _ALPHASCALE_ASM9260_ICOLL_H
+
+#define ASM9260_NUM_IRQS		64
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+
+#define ASM9260_HW_ICOLL_VECTOR				0x0000
+/*
+ * bits 31:2
+ * This register presents the vector address for the interrupt currently
+ * active on the CPU IRQ input. Writing to this register notifies the
+ * interrupt collector that the interrupt service routine for the current
+ * interrupt has been entered.
+ * The exception trap should have a LDPC instruction from this address:
+ * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018
+ */
+
+/*
+ * The Interrupt Collector Level Acknowledge Register is used by software to
+ * indicate the completion of an interrupt on a specific level.
+ * This register is written at the very end of an interrupt service routine. If
+ * nesting is used then the CPU irq must be turned on before writing to this
+ * register to avoid a race condition in the CPU interrupt hardware.
+ */
+#define ASM9260_HW_ICOLL_LEVELACK			0x0010
+#define ASM9260_BM_LEVELn(nr)				BIT(nr)
+
+#define ASM9260_HW_ICOLL_CTRL				0x0020
+/*
+ * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on
+ * asm9260.
+ */
+#define ASM9260_BM_CTRL_SFTRST				BIT(31)
+#define ASM9260_BM_CTRL_CLKGATE				BIT(30)
+/* disable interrupt level nesting */
+#define ASM9260_BM_CTRL_NO_NESTING			BIT(19)
+/*
+ * Set this bit to one enable the RISC32-style read side effect associated with
+ * the vector address register. In this mode, interrupt in-service is signaled
+ * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt
+ * vector address. Set this bit to zero for normal operation, in which the ISR
+ * signals in-service explicitly by means of a write to the
+ * ASM9260_HW_ICOLL_VECTOR register.
+ * 0 - Must Write to Vector register to go in-service.
+ * 1 - Go in-service as a read side effect
+ */
+#define ASM9260_BM_CTRL_ARM_RSE_MODE			BIT(18)
+#define ASM9260_BM_CTRL_IRQ_ENABLE			BIT(16)
+
+#define ASM9260_HW_ICOLL_STAT_OFFSET			0x0030
+/*
+ * bits 5:0
+ * Vector number of current interrupt. Multiply by 4 and add to vector base
+ * address to obtain the value in ASM9260_HW_ICOLL_VECTOR.
+ */
+
+/*
+ * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines
+ * coming from various parts of the chip. Its purpose is to improve diagnostic
+ * observability.
+ */
+#define ASM9260_HW_ICOLL_RAW0				0x0040
+#define ASM9260_HW_ICOLL_RAW1				0x0050
+
+#define ASM9260_HW_ICOLL_INTERRUPT0			0x0060
+#define ASM9260_HW_ICOLL_INTERRUPTn(n)		(0x0060 + ((n) >> 2) * 0x10)
+/*
+ * WARNING: Modifying the priority of an enabled interrupt may result in
+ * undefined behavior.
+ */
+#define ASM9260_BM_INT_PRIORITY_MASK			0x3
+#define ASM9260_BM_INT_ENABLE				BIT(2)
+#define ASM9260_BM_INT_SOFTIRQ				BIT(3)
+
+#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)		(((n) & 0x3) << 3)
+#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n)		(1 << (2 + \
+			ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)))
+
+#define ASM9260_HW_ICOLL_VBASE				0x0160
+/*
+ * bits 31:2
+ * This bitfield holds the upper 30 bits of the base address of the vector
+ * table.
+ */
+
+#define ASM9260_HW_ICOLL_CLEAR0				0x01d0
+#define ASM9260_HW_ICOLL_CLEAR1				0x01e0
+#define ASM9260_HW_ICOLL_CLEARn(n)			(((n >> 5) * 0x10) \
+							+ SET_REG)
+#define ASM9260_BM_CLEAR_BIT(n)				BIT(n & 0x1f)
+
+/* Scratchpad */
+#define ASM9260_HW_ICOLL_UNDEF_VECTOR			0x01f0
+#endif
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 1ed759b..88c2bcd 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -1,5 +1,7 @@
 /*
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *	Add Alphascale ASM9260 support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +30,8 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+#include "alphascale_asm9260-icoll.h"
+
 /*
  * this device provide 4 offsets for each register:
  * 0x0 - plain read write mode
@@ -49,17 +53,41 @@
 
 #define ICOLL_NUM_IRQS		128
 
+enum icoll_type {
+	ICOLL,
+	ASM9260_ICOLL,
+};
+
 struct icoll_priv {
 	void __iomem *vector;
 	void __iomem *levelack;
 	void __iomem *ctrl;
 	void __iomem *stat;
 	void __iomem *intr;
+	void __iomem *clear;
+	enum icoll_type type;
 };
 
 static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & 3) << 3);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> 2) * 0x10);
+}
+
 static void icoll_ack_irq(struct irq_data *d)
 {
 	/*
@@ -83,12 +111,34 @@ static void icoll_unmask_irq(struct irq_data *d)
 			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
+static void asm9260_mask_irq(struct irq_data *d)
+{
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+		     icoll_priv.clear +
+		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+}
+
 static struct irq_chip mxs_icoll_chip = {
 	.irq_ack = icoll_ack_irq,
 	.irq_mask = icoll_mask_irq,
 	.irq_unmask = icoll_unmask_irq,
 };
 
+static struct irq_chip asm9260_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = asm9260_mask_irq,
+	.irq_unmask = asm9260_unmask_irq,
+};
+
 asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
@@ -101,7 +151,14 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
 				irq_hw_number_t hw)
 {
-	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	struct irq_chip *chip;
+
+	if (icoll_priv.type == ICOLL)
+		chip = &mxs_icoll_chip;
+	else
+		chip = &asm9260_icoll_chip;
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
 	set_irq_flags(virq, IRQF_VALID);
 
 	return 0;
@@ -139,12 +196,15 @@ static int __init icoll_of_init(struct device_node *np,
 {
 	void __iomem *icoll_base;
 
+	icoll_priv.type = ICOLL;
+
 	icoll_base		= icoll_init_iobase(np);
 	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
 	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
 	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
 	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
 	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= NULL;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
@@ -157,3 +217,34 @@ static int __init icoll_of_init(struct device_node *np,
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+	int i;
+
+	icoll_priv.type = ASM9260_ICOLL;
+
+	icoll_base = icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + ASM9260_HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + ASM9260_HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+	writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+			icoll_priv.ctrl);
+	/*
+	 * ASM9260 don't provide reset bit. So, we need to set level 0
+	 * manually.
+	 */
+	for (i = 0; i < 16 * 0x10; i += 0x10)
+		writel(0, icoll_priv.intr + i);
+
+	icoll_add_domain(np, ASM9260_NUM_IRQS);
+
+	return icoll_domain ? 0 : -ENODEV;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);
-- 
2.5.0

Re: [PATCH v5 2/2] ARM: irqchip: mxs: add Alphascale ASM9260 support

[Thomas Gleixner]

On Mon, 5 Oct 2015, Oleksij Rempel wrote:
> @@ -101,7 +151,14 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
>  static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
>  				irq_hw_number_t hw)
>  {
> -	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
> +	struct irq_chip *chip;
> +
> +	if (icoll_priv.type == ICOLL)
> +		chip = &mxs_icoll_chip;
> +	else
> +		chip = &asm9260_icoll_chip;
> +
> +	irq_set_chip_and_handler(virq, chip, handle_level_irq);
>  	set_irq_flags(virq, IRQF_VALID);

This does neither apply on mainline nor on tip/irq/core. Please
prepare your patches against current trees not against something
stale.

Thanks,

	tglx

[PATCH v6 0/2] Add support for ASM9260 interrupt controller

[Oleksij Rempel]

v2:
- move icoll_init_iobasea and icoll_add_domain to preparation patch
- add enum icoll_type
- make separate irq_chip for ICOLL and ASM9260 

v3:
- fix typo in subject: Alp_h_ascale
- remove "intr_per_reg", it is not used any more. It will also
	save some CPU cycles
- remove spin locks. It was a bad idea.

v4:
- remove set_irq_flags()

v5:
- remove intr_per_reg from first patch
- move *clear to second patch

v6:
- update against latest torvalds/linux.git master v4.3-rc4

Oleksij Rempel (2):
  ARM: irqchip: mxs: prepare driver for HW with different offsets
  ARM: irqchip: mxs: add Alphascale ASM9260 support

 drivers/irqchip/Kconfig                    |   5 +
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 ++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  | 171 ++++++++++++++++++++++++++---
 4 files changed, 269 insertions(+), 18 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

-- 
2.1.4

[PATCH v6 1/2] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Oleksij Rempel]

Some HW has similar functionality but different register offsets.
Make sure we can change offsets dynamically.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/irq-mxs.c | 78 +++++++++++++++++++++++++++++++++++++----------
 1 file changed, 62 insertions(+), 16 deletions(-)

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 604df63..86dec9a 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -28,18 +28,36 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
 #define HW_ICOLL_STAT_OFFSET			0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define HW_ICOLL_INTERRUPT0			0x0120
+#define HW_ICOLL_INTERRUPTn(n)			((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE			BIT(2)
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
 #define ICOLL_NUM_IRQS		128
 
-static void __iomem *icoll_base;
+struct icoll_priv {
+	void __iomem *vector;
+	void __iomem *levelack;
+	void __iomem *ctrl;
+	void __iomem *stat;
+	void __iomem *intr;
+};
+
+static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
@@ -50,19 +68,19 @@ static void icoll_ack_irq(struct irq_data *d)
 	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
 	 */
 	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
-			icoll_base + HW_ICOLL_LEVELACK);
+			icoll_priv.levelack);
 }
 
 static void icoll_mask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -75,8 +93,8 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
 
-	irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
-	__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+	irqnr = __raw_readl(icoll_priv.stat);
+	__raw_writel(irqnr, icoll_priv.vector);
 	handle_domain_irq(icoll_domain, irqnr, regs);
 }
 
@@ -93,20 +111,48 @@ static const struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
+static void __init icoll_add_domain(struct device_node *np,
+			  int num)
+{
+	icoll_domain = irq_domain_add_linear(np, num,
+					     &icoll_irq_domain_ops, NULL);
+
+	if (!icoll_domain)
+		panic("%s: unable add irq domain", np->full_name);
+	irq_set_default_host(icoll_domain);
+	set_handle_irq(icoll_handle_irq);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
+{
+	void __iomem *icoll_base;
+
+	icoll_base = of_io_request_and_map(np, 0, np->name);
+	if (!icoll_base)
+		panic("%s: unable to map resource", np->full_name);
+	return icoll_base;
+}
+
 static int __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
-	icoll_base = of_iomap(np, 0);
-	WARN_ON(!icoll_base);
+	void __iomem *icoll_base;
+
+	icoll_base		= icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
-	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+	stmp_reset_block(icoll_priv.ctrl);
+
+	icoll_add_domain(np, ICOLL_NUM_IRQS);
 
-	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
-					     &icoll_irq_domain_ops, NULL);
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
-- 
2.1.4

Re: [PATCH v6 1/2] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Thomas Gleixner]

Oleksij,

On Sat, 10 Oct 2015, Oleksij Rempel wrote:

The proper subject line starts with:

irqchip/mxs: 

> Some HW has similar functionality but different register offsets.
> Make sure we can change offsets dynamically.

The patch does way more than that. I told you in V2 already:

> > You forgot to mention the other preparatory changes.

There is still nothing in the changelog.

> +static void __init icoll_add_domain(struct device_node *np,
> +			  int num)
> +{
> +	icoll_domain = irq_domain_add_linear(np, num,
> +					     &icoll_irq_domain_ops, NULL);
> +
> +	if (!icoll_domain)
> +		panic("%s: unable add irq domain", np->full_name);

This splitout should be a separate patch with an explanation why you
add

> +	irq_set_default_host(icoll_domain);

and

> +	set_handle_irq(icoll_handle_irq);

The latter is already done via the DT_MACHINE_START magic. So you
should it remove there, because otherwise that call is just
pointless. See the implementation of set_handle_irq.

> +}
> +
> +static void __iomem * __init icoll_init_iobase(struct device_node *np)
> +{
> +	void __iomem *icoll_base;
> +
> +	icoll_base = of_io_request_and_map(np, 0, np->name);
> +	if (!icoll_base)
> +		panic("%s: unable to map resource", np->full_name);
> +	return icoll_base;
> +}

The panic() is actually a bug fix, because the old code had a
WARN_ON() and then happily dereferenced the NULL pointer. So this
wants to go into a separate patch as well.

> +	icoll_add_domain(np, ICOLL_NUM_IRQS);
>  
> -	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
> -					     &icoll_irq_domain_ops, NULL);
>  	return icoll_domain ? 0 : -ENODEV;

In case of !icoll_domain this return is not reached as you paniced
already. So why would we still check icoll_domain?

Thanks,

	tglx

Re: [PATCH v6 1/2] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Oleksij Rempel]

[-- Attachment #1: Type: text/plain, Size: 2277 bytes --]

Am 11.10.2015 um 19:58 schrieb Thomas Gleixner:
> Oleksij,
> 
> On Sat, 10 Oct 2015, Oleksij Rempel wrote:
> 
> The proper subject line starts with:
> 
> irqchip/mxs: 
> 
>> Some HW has similar functionality but different register offsets.
>> Make sure we can change offsets dynamically.
> 
> The patch does way more than that. I told you in V2 already:
> 
>>> You forgot to mention the other preparatory changes.
> 
> There is still nothing in the changelog.
> 
>> +static void __init icoll_add_domain(struct device_node *np,
>> +			  int num)
>> +{
>> +	icoll_domain = irq_domain_add_linear(np, num,
>> +					     &icoll_irq_domain_ops, NULL);
>> +
>> +	if (!icoll_domain)
>> +		panic("%s: unable add irq domain", np->full_name);
> 
> This splitout should be a separate patch with an explanation why you
> add

I assume i can remove this both lines. irq_set_default_host is an
artefact from old code.

>> +	irq_set_default_host(icoll_domain);
> 
> and
> 
>> +	set_handle_irq(icoll_handle_irq);
> 
> The latter is already done via the DT_MACHINE_START magic. So you
> should it remove there, because otherwise that call is just
> pointless. See the implementation of set_handle_irq.
> 
>> +}
>> +
>> +static void __iomem * __init icoll_init_iobase(struct device_node *np)
>> +{
>> +	void __iomem *icoll_base;
>> +
>> +	icoll_base = of_io_request_and_map(np, 0, np->name);
>> +	if (!icoll_base)
>> +		panic("%s: unable to map resource", np->full_name);
>> +	return icoll_base;
>> +}
> 
> The panic() is actually a bug fix, because the old code had a
> WARN_ON() and then happily dereferenced the NULL pointer. So this
> wants to go into a separate patch as well.
> 
>> +	icoll_add_domain(np, ICOLL_NUM_IRQS);
>>  
>> -	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
>> -					     &icoll_irq_domain_ops, NULL);
>>  	return icoll_domain ? 0 : -ENODEV;
> 
> In case of !icoll_domain this return is not reached as you paniced
> already. So why would we still check icoll_domain?

I'm paniced on !icoll_base, icoll_domain will give only warning.
http://lxr.free-electrons.com/source/kernel/irq/irqdomain.c#L52

Or do i miss some thing?

> 
> Thanks,
> 
> 	tglx
> 


-- 
Regards,
Oleksij


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 213 bytes --]

Re: [PATCH v6 1/2] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Thomas Gleixner]

On Mon, 12 Oct 2015, Oleksij Rempel wrote:
> Am 11.10.2015 um 19:58 schrieb Thomas Gleixner:
> >> +	icoll_add_domain(np, ICOLL_NUM_IRQS);
> >>  
> >> -	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
> >> -					     &icoll_irq_domain_ops, NULL);
> >>  	return icoll_domain ? 0 : -ENODEV;
> > 
> > In case of !icoll_domain this return is not reached as you paniced
> > already. So why would we still check icoll_domain?
> 
> I'm paniced on !icoll_base, icoll_domain will give only warning.
> http://lxr.free-electrons.com/source/kernel/irq/irqdomain.c#L52
> 
> Or do i miss some thing?

Yes. Your patch makes that:

>> +    if (!icoll_domain)
>> +            panic("%s: unable add irq domain", np->full_name);

Thanks,

	tglx

[PATCH v7 0/3] Add support for ASM9260 interrupt controller

[Oleksij Rempel]

v2:
- move icoll_init_iobasea and icoll_add_domain to preparation patch
- add enum icoll_type
- make separate irq_chip for ICOLL and ASM9260 

v3:
- fix typo in subject: Alp_h_ascale
- remove "intr_per_reg", it is not used any more. It will also
	save some CPU cycles
- remove spin locks. It was a bad idea.

v4:
- remove set_irq_flags()

v5:
- remove intr_per_reg from first patch
- move *clear to second patch

v6:
- update against latest torvalds/linux.git master v4.3-rc4

v7:
- remove irq_set_default_host and set_handle_irq from patch 1/2.
	they are artifacts from old code.
- remove "return icoll_domain ? 0 : -ENODEV;" checking from both patches.
- create separate patch to replace WARN_ON(!icoll_base),
	sinse it is separate bugfix

Oleksij Rempel (3):
  ARM: irqchip: mxs: do panic if icoll_base == NULL
  ARM: irqchip: mxs: prepare driver for HW with different offsets
  ARM: irqchip: mxs: add Alphascale ASM9260 support

 drivers/irqchip/Kconfig                    |   5 +
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 ++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  | 171 ++++++++++++++++++++++++++---
 4 files changed, 268 insertions(+), 19 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

-- 
2.1.4

[PATCH v7 1/3] ARM: irqchip: mxs: do panic if icoll_base == NULL

[Oleksij Rempel]

Current code will only WARN_ON() and dereference the NULL pointer.
In this case it is better to panic and stop execution.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/irq-mxs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 604df63..ce69860 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -97,7 +97,8 @@ static int __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
 	icoll_base = of_iomap(np, 0);
-	WARN_ON(!icoll_base);
+	if (!icoll_base)
+		panic("%s: unable to map resource", np->full_name);
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
-- 
2.1.4

[tip:irq/core] irqchip/mxs: Panic if ioremap or domain creation fails

[tip-bot for Oleksij Rempel]

Commit-ID:  e59a8451be1162d5a10a33e40092f1796cb8fdca
Gitweb:     http://git.kernel.org/tip/e59a8451be1162d5a10a33e40092f1796cb8fdca
Author:     Oleksij Rempel <linux@rempel-privat.de>
AuthorDate: Mon, 12 Oct 2015 21:15:30 +0200
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 14 Oct 2015 09:37:47 +0200

irqchip/mxs: Panic if ioremap or domain creation fails

Current code will only warn and then dereference the NULL pointer or
continue, which results in a fatal NULL pointer dereference later.

If the initialization fails, the machine is unusable, so panic right
away.

[ tglx: Massaged changelog and picked the irqdomain panic from the
  	next patch]

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Tested-by: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: marc.zyngier@arm.com
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/1444677334-12242-2-git-send-email-linux@rempel-privat.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/irqchip/irq-mxs.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 604df63..96148a7 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -97,7 +97,8 @@ static int __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
 	icoll_base = of_iomap(np, 0);
-	WARN_ON(!icoll_base);
+	if (!icoll_base)
+		panic("%s: unable to map resource", np->full_name);
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
@@ -107,6 +108,9 @@ static int __init icoll_of_init(struct device_node *np,
 
 	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
 					     &icoll_irq_domain_ops, NULL);
-	return icoll_domain ? 0 : -ENODEV;
+	if (!icoll_domain)
+		panic("%s: unable to create irqdomain", np->full_name);
+
+	return 0;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);

[PATCH v6 1/2] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Oleksij Rempel]

Some HW has similar functionality but different register offsets.
Make sure we can change offsets dynamically.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/irq-mxs.c | 78 +++++++++++++++++++++++++++++++++++++----------
 1 file changed, 62 insertions(+), 16 deletions(-)

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 604df63..86dec9a 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -28,18 +28,36 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
 #define HW_ICOLL_STAT_OFFSET			0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define HW_ICOLL_INTERRUPT0			0x0120
+#define HW_ICOLL_INTERRUPTn(n)			((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE			BIT(2)
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
 #define ICOLL_NUM_IRQS		128
 
-static void __iomem *icoll_base;
+struct icoll_priv {
+	void __iomem *vector;
+	void __iomem *levelack;
+	void __iomem *ctrl;
+	void __iomem *stat;
+	void __iomem *intr;
+};
+
+static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
@@ -50,19 +68,19 @@ static void icoll_ack_irq(struct irq_data *d)
 	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
 	 */
 	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
-			icoll_base + HW_ICOLL_LEVELACK);
+			icoll_priv.levelack);
 }
 
 static void icoll_mask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -75,8 +93,8 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
 
-	irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
-	__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+	irqnr = __raw_readl(icoll_priv.stat);
+	__raw_writel(irqnr, icoll_priv.vector);
 	handle_domain_irq(icoll_domain, irqnr, regs);
 }
 
@@ -93,20 +111,48 @@ static const struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
+static void __init icoll_add_domain(struct device_node *np,
+			  int num)
+{
+	icoll_domain = irq_domain_add_linear(np, num,
+					     &icoll_irq_domain_ops, NULL);
+
+	if (!icoll_domain)
+		panic("%s: unable add irq domain", np->full_name);
+	irq_set_default_host(icoll_domain);
+	set_handle_irq(icoll_handle_irq);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
+{
+	void __iomem *icoll_base;
+
+	icoll_base = of_io_request_and_map(np, 0, np->name);
+	if (!icoll_base)
+		panic("%s: unable to map resource", np->full_name);
+	return icoll_base;
+}
+
 static int __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
-	icoll_base = of_iomap(np, 0);
-	WARN_ON(!icoll_base);
+	void __iomem *icoll_base;
+
+	icoll_base		= icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
-	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+	stmp_reset_block(icoll_priv.ctrl);
+
+	icoll_add_domain(np, ICOLL_NUM_IRQS);
 
-	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
-					     &icoll_irq_domain_ops, NULL);
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
-- 
2.1.4

[PATCH v6 2/2] ARM: irqchip: mxs: add Alphascale ASM9260 support

[Oleksij Rempel]

Freescale iMX23/iMX28 and Alphascale ASM9260 have similar
interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260.
Differences between this devices are fallowing:
- different register offsets
- different count of intterupt lines per register
- ASM9260 don't provide reset bit
- ASM9260 don't support FIQ.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/Kconfig                    |   5 ++
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  |  93 +++++++++++++++++++++++-
 4 files changed, 207 insertions(+), 2 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 27b52c8..0dfd840 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -187,3 +187,8 @@ config IMX_GPCV2
 	select IRQ_DOMAIN
 	help
 	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
+config IRQ_MXS
+	def_bool y if MACH_ASM9260 || ARCH_MXS
+	select IRQ_DOMAIN
+	select STMP_DEVICE
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bb3048f..177f78f 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
-obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
+obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
diff --git a/drivers/irqchip/alphascale_asm9260-icoll.h b/drivers/irqchip/alphascale_asm9260-icoll.h
new file mode 100644
index 0000000..5cec108
--- /dev/null
+++ b/drivers/irqchip/alphascale_asm9260-icoll.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ALPHASCALE_ASM9260_ICOLL_H
+#define _ALPHASCALE_ASM9260_ICOLL_H
+
+#define ASM9260_NUM_IRQS		64
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+
+#define ASM9260_HW_ICOLL_VECTOR				0x0000
+/*
+ * bits 31:2
+ * This register presents the vector address for the interrupt currently
+ * active on the CPU IRQ input. Writing to this register notifies the
+ * interrupt collector that the interrupt service routine for the current
+ * interrupt has been entered.
+ * The exception trap should have a LDPC instruction from this address:
+ * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018
+ */
+
+/*
+ * The Interrupt Collector Level Acknowledge Register is used by software to
+ * indicate the completion of an interrupt on a specific level.
+ * This register is written at the very end of an interrupt service routine. If
+ * nesting is used then the CPU irq must be turned on before writing to this
+ * register to avoid a race condition in the CPU interrupt hardware.
+ */
+#define ASM9260_HW_ICOLL_LEVELACK			0x0010
+#define ASM9260_BM_LEVELn(nr)				BIT(nr)
+
+#define ASM9260_HW_ICOLL_CTRL				0x0020
+/*
+ * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on
+ * asm9260.
+ */
+#define ASM9260_BM_CTRL_SFTRST				BIT(31)
+#define ASM9260_BM_CTRL_CLKGATE				BIT(30)
+/* disable interrupt level nesting */
+#define ASM9260_BM_CTRL_NO_NESTING			BIT(19)
+/*
+ * Set this bit to one enable the RISC32-style read side effect associated with
+ * the vector address register. In this mode, interrupt in-service is signaled
+ * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt
+ * vector address. Set this bit to zero for normal operation, in which the ISR
+ * signals in-service explicitly by means of a write to the
+ * ASM9260_HW_ICOLL_VECTOR register.
+ * 0 - Must Write to Vector register to go in-service.
+ * 1 - Go in-service as a read side effect
+ */
+#define ASM9260_BM_CTRL_ARM_RSE_MODE			BIT(18)
+#define ASM9260_BM_CTRL_IRQ_ENABLE			BIT(16)
+
+#define ASM9260_HW_ICOLL_STAT_OFFSET			0x0030
+/*
+ * bits 5:0
+ * Vector number of current interrupt. Multiply by 4 and add to vector base
+ * address to obtain the value in ASM9260_HW_ICOLL_VECTOR.
+ */
+
+/*
+ * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines
+ * coming from various parts of the chip. Its purpose is to improve diagnostic
+ * observability.
+ */
+#define ASM9260_HW_ICOLL_RAW0				0x0040
+#define ASM9260_HW_ICOLL_RAW1				0x0050
+
+#define ASM9260_HW_ICOLL_INTERRUPT0			0x0060
+#define ASM9260_HW_ICOLL_INTERRUPTn(n)		(0x0060 + ((n) >> 2) * 0x10)
+/*
+ * WARNING: Modifying the priority of an enabled interrupt may result in
+ * undefined behavior.
+ */
+#define ASM9260_BM_INT_PRIORITY_MASK			0x3
+#define ASM9260_BM_INT_ENABLE				BIT(2)
+#define ASM9260_BM_INT_SOFTIRQ				BIT(3)
+
+#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)		(((n) & 0x3) << 3)
+#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n)		(1 << (2 + \
+			ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)))
+
+#define ASM9260_HW_ICOLL_VBASE				0x0160
+/*
+ * bits 31:2
+ * This bitfield holds the upper 30 bits of the base address of the vector
+ * table.
+ */
+
+#define ASM9260_HW_ICOLL_CLEAR0				0x01d0
+#define ASM9260_HW_ICOLL_CLEAR1				0x01e0
+#define ASM9260_HW_ICOLL_CLEARn(n)			(((n >> 5) * 0x10) \
+							+ SET_REG)
+#define ASM9260_BM_CLEAR_BIT(n)				BIT(n & 0x1f)
+
+/* Scratchpad */
+#define ASM9260_HW_ICOLL_UNDEF_VECTOR			0x01f0
+#endif
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 86dec9a..78c2fe7 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -1,5 +1,7 @@
 /*
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *	Add Alphascale ASM9260 support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +30,8 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+#include "alphascale_asm9260-icoll.h"
+
 /*
  * this device provide 4 offsets for each register:
  * 0x0 - plain read write mode
@@ -49,17 +53,41 @@
 
 #define ICOLL_NUM_IRQS		128
 
+enum icoll_type {
+	ICOLL,
+	ASM9260_ICOLL,
+};
+
 struct icoll_priv {
 	void __iomem *vector;
 	void __iomem *levelack;
 	void __iomem *ctrl;
 	void __iomem *stat;
 	void __iomem *intr;
+	void __iomem *clear;
+	enum icoll_type type;
 };
 
 static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & 3) << 3);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> 2) * 0x10);
+}
+
 static void icoll_ack_irq(struct irq_data *d)
 {
 	/*
@@ -83,12 +111,34 @@ static void icoll_unmask_irq(struct irq_data *d)
 			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
+static void asm9260_mask_irq(struct irq_data *d)
+{
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+		     icoll_priv.clear +
+		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+}
+
 static struct irq_chip mxs_icoll_chip = {
 	.irq_ack = icoll_ack_irq,
 	.irq_mask = icoll_mask_irq,
 	.irq_unmask = icoll_unmask_irq,
 };
 
+static struct irq_chip asm9260_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = asm9260_mask_irq,
+	.irq_unmask = asm9260_unmask_irq,
+};
+
 asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
@@ -101,7 +151,14 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
 				irq_hw_number_t hw)
 {
-	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	struct irq_chip *chip;
+
+	if (icoll_priv.type == ICOLL)
+		chip = &mxs_icoll_chip;
+	else
+		chip = &asm9260_icoll_chip;
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
 
 	return 0;
 }
@@ -138,12 +195,15 @@ static int __init icoll_of_init(struct device_node *np,
 {
 	void __iomem *icoll_base;
 
+	icoll_priv.type = ICOLL;
+
 	icoll_base		= icoll_init_iobase(np);
 	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
 	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
 	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
 	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
 	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= NULL;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
@@ -156,3 +216,34 @@ static int __init icoll_of_init(struct device_node *np,
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+	int i;
+
+	icoll_priv.type = ASM9260_ICOLL;
+
+	icoll_base = icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + ASM9260_HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + ASM9260_HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+	writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+			icoll_priv.ctrl);
+	/*
+	 * ASM9260 don't provide reset bit. So, we need to set level 0
+	 * manually.
+	 */
+	for (i = 0; i < 16 * 0x10; i += 0x10)
+		writel(0, icoll_priv.intr + i);
+
+	icoll_add_domain(np, ASM9260_NUM_IRQS);
+
+	return icoll_domain ? 0 : -ENODEV;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);
-- 
2.1.4

[PATCH v7 2/3] ARM: irqchip: mxs: prepare driver for HW with different offsets

[Oleksij Rempel]

Alphascale asm9260 has similar functionality but different register offsets.
This patch should prepare irq-mxs code to reused for asm9260 too.

Fallowing changes was made:
- Define SET_REG and CLR_REG. This controllers support separate CLR and
SET offsets for each register.
- Re define HW_ICOLL_INTERRUPT with use of SET_REG and CLR_REG to make
it readable for both cases.
- Create struct icoll_priv, to change register offsets on load.
- Creat function icoll_init_iobase and icoll_add_domain for shared init code.
- Don't check icoll_domain on return. We will call panic on each error
case any way.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/irq-mxs.c | 79 ++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 61 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index ce69860..d5cf208 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -28,18 +28,36 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
 #define HW_ICOLL_STAT_OFFSET			0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define HW_ICOLL_INTERRUPT0			0x0120
+#define HW_ICOLL_INTERRUPTn(n)			((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE			BIT(2)
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
 #define ICOLL_NUM_IRQS		128
 
-static void __iomem *icoll_base;
+struct icoll_priv {
+	void __iomem *vector;
+	void __iomem *levelack;
+	void __iomem *ctrl;
+	void __iomem *stat;
+	void __iomem *intr;
+};
+
+static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
@@ -50,19 +68,19 @@ static void icoll_ack_irq(struct irq_data *d)
 	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
 	 */
 	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
-			icoll_base + HW_ICOLL_LEVELACK);
+			icoll_priv.levelack);
 }
 
 static void icoll_mask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -75,8 +93,8 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
 
-	irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
-	__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+	irqnr = __raw_readl(icoll_priv.stat);
+	__raw_writel(irqnr, icoll_priv.vector);
 	handle_domain_irq(icoll_domain, irqnr, regs);
 }
 
@@ -93,21 +111,46 @@ static const struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
-static int __init icoll_of_init(struct device_node *np,
-			  struct device_node *interrupt_parent)
+static void __init icoll_add_domain(struct device_node *np,
+			  int num)
+{
+	icoll_domain = irq_domain_add_linear(np, num,
+					     &icoll_irq_domain_ops, NULL);
+
+	if (!icoll_domain)
+		panic("%s: unable add irq domain", np->full_name);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
 {
-	icoll_base = of_iomap(np, 0);
+	void __iomem *icoll_base;
+
+	icoll_base = of_io_request_and_map(np, 0, np->name);
 	if (!icoll_base)
 		panic("%s: unable to map resource", np->full_name);
+	return icoll_base;
+}
+
+static int __init icoll_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+
+	icoll_base		= icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
-	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+	stmp_reset_block(icoll_priv.ctrl);
 
-	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
-					     &icoll_irq_domain_ops, NULL);
-	return icoll_domain ? 0 : -ENODEV;
+	icoll_add_domain(np, ICOLL_NUM_IRQS);
+
+	return 0;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
-- 
2.1.4

[tip:irq/core] irqchip/mxs: Prepare driver for hardware with different offsets

[tip-bot for Oleksij Rempel]

Commit-ID:  25e34b44313b61d7a87819498ccfd0129441604a
Gitweb:     http://git.kernel.org/tip/25e34b44313b61d7a87819498ccfd0129441604a
Author:     Oleksij Rempel <linux@rempel-privat.de>
AuthorDate: Mon, 12 Oct 2015 21:15:33 +0200
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 14 Oct 2015 09:37:47 +0200

irqchip/mxs: Prepare driver for hardware with different offsets

Alphascale asm9260 has similar functionality but different register
offsets. To support asm9260 in the mxs driver we need to rework the
hardcoded access mechanisms.

- Define SET_REG and CLR_REG. These controllers support seperate CLR and
  SET offsets for each register.

- Reimplement HW_ICOLL_INTERRUPT with SET_REG and CLR_REG to make it
  usable for both cases.

- Instead of using icoll_base and adding the offsets at runtime,
  create a new data structure which contains base pointers to all
  required regitsters and use it.

- Split out functionality, which is required for the init code of mxs
  and asm9260, into helper functions

[ tglx: Massaged changelog and moved the return value change to the
  	previous patch ]

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Tested-by: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: marc.zyngier@arm.com
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/1444677334-12242-5-git-send-email-linux@rempel-privat.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/irqchip/irq-mxs.c | 78 +++++++++++++++++++++++++++++++++++------------
 1 file changed, 59 insertions(+), 19 deletions(-)

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 96148a7..eaab5a6 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -28,18 +28,36 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
 #define HW_ICOLL_STAT_OFFSET			0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define HW_ICOLL_INTERRUPT0			0x0120
+#define HW_ICOLL_INTERRUPTn(n)			((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE			BIT(2)
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
 #define ICOLL_NUM_IRQS		128
 
-static void __iomem *icoll_base;
+struct icoll_priv {
+	void __iomem *vector;
+	void __iomem *levelack;
+	void __iomem *ctrl;
+	void __iomem *stat;
+	void __iomem *intr;
+};
+
+static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
@@ -50,19 +68,19 @@ static void icoll_ack_irq(struct irq_data *d)
 	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
 	 */
 	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
-			icoll_base + HW_ICOLL_LEVELACK);
+			icoll_priv.levelack);
 }
 
 static void icoll_mask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -75,8 +93,8 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
 
-	irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
-	__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+	irqnr = __raw_readl(icoll_priv.stat);
+	__raw_writel(irqnr, icoll_priv.vector);
 	handle_domain_irq(icoll_domain, irqnr, regs);
 }
 
@@ -93,23 +111,45 @@ static const struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
-static int __init icoll_of_init(struct device_node *np,
-			  struct device_node *interrupt_parent)
+static void __init icoll_add_domain(struct device_node *np,
+			  int num)
+{
+	icoll_domain = irq_domain_add_linear(np, num,
+					     &icoll_irq_domain_ops, NULL);
+
+	if (!icoll_domain)
+		panic("%s: unable to create irq domain", np->full_name);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
 {
-	icoll_base = of_iomap(np, 0);
+	void __iomem *icoll_base;
+
+	icoll_base = of_io_request_and_map(np, 0, np->name);
 	if (!icoll_base)
 		panic("%s: unable to map resource", np->full_name);
+	return icoll_base;
+}
+
+static int __init icoll_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+
+	icoll_base		= icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
-	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+	stmp_reset_block(icoll_priv.ctrl);
 
-	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
-					     &icoll_irq_domain_ops, NULL);
-	if (!icoll_domain)
-		panic("%s: unable to create irqdomain", np->full_name);
+	icoll_add_domain(np, ICOLL_NUM_IRQS);
 
 	return 0;
 }

[PATCH v7 3/3] ARM: irqchip: mxs: add Alphascale ASM9260 support

[Oleksij Rempel]

Freescale iMX23/iMX28 and Alphascale ASM9260 have similar
interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260.
Differences between this devices are fallowing:
- different register offsets
- different count of intterupt lines per register
- ASM9260 don't provide reset bit
- ASM9260 don't support FIQ.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/Kconfig                    |   5 ++
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  |  93 +++++++++++++++++++++++-
 4 files changed, 207 insertions(+), 2 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 27b52c8..0dfd840 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -187,3 +187,8 @@ config IMX_GPCV2
 	select IRQ_DOMAIN
 	help
 	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
+config IRQ_MXS
+	def_bool y if MACH_ASM9260 || ARCH_MXS
+	select IRQ_DOMAIN
+	select STMP_DEVICE
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bb3048f..177f78f 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
-obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
+obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
diff --git a/drivers/irqchip/alphascale_asm9260-icoll.h b/drivers/irqchip/alphascale_asm9260-icoll.h
new file mode 100644
index 0000000..5cec108
--- /dev/null
+++ b/drivers/irqchip/alphascale_asm9260-icoll.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ALPHASCALE_ASM9260_ICOLL_H
+#define _ALPHASCALE_ASM9260_ICOLL_H
+
+#define ASM9260_NUM_IRQS		64
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+
+#define ASM9260_HW_ICOLL_VECTOR				0x0000
+/*
+ * bits 31:2
+ * This register presents the vector address for the interrupt currently
+ * active on the CPU IRQ input. Writing to this register notifies the
+ * interrupt collector that the interrupt service routine for the current
+ * interrupt has been entered.
+ * The exception trap should have a LDPC instruction from this address:
+ * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018
+ */
+
+/*
+ * The Interrupt Collector Level Acknowledge Register is used by software to
+ * indicate the completion of an interrupt on a specific level.
+ * This register is written at the very end of an interrupt service routine. If
+ * nesting is used then the CPU irq must be turned on before writing to this
+ * register to avoid a race condition in the CPU interrupt hardware.
+ */
+#define ASM9260_HW_ICOLL_LEVELACK			0x0010
+#define ASM9260_BM_LEVELn(nr)				BIT(nr)
+
+#define ASM9260_HW_ICOLL_CTRL				0x0020
+/*
+ * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on
+ * asm9260.
+ */
+#define ASM9260_BM_CTRL_SFTRST				BIT(31)
+#define ASM9260_BM_CTRL_CLKGATE				BIT(30)
+/* disable interrupt level nesting */
+#define ASM9260_BM_CTRL_NO_NESTING			BIT(19)
+/*
+ * Set this bit to one enable the RISC32-style read side effect associated with
+ * the vector address register. In this mode, interrupt in-service is signaled
+ * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt
+ * vector address. Set this bit to zero for normal operation, in which the ISR
+ * signals in-service explicitly by means of a write to the
+ * ASM9260_HW_ICOLL_VECTOR register.
+ * 0 - Must Write to Vector register to go in-service.
+ * 1 - Go in-service as a read side effect
+ */
+#define ASM9260_BM_CTRL_ARM_RSE_MODE			BIT(18)
+#define ASM9260_BM_CTRL_IRQ_ENABLE			BIT(16)
+
+#define ASM9260_HW_ICOLL_STAT_OFFSET			0x0030
+/*
+ * bits 5:0
+ * Vector number of current interrupt. Multiply by 4 and add to vector base
+ * address to obtain the value in ASM9260_HW_ICOLL_VECTOR.
+ */
+
+/*
+ * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines
+ * coming from various parts of the chip. Its purpose is to improve diagnostic
+ * observability.
+ */
+#define ASM9260_HW_ICOLL_RAW0				0x0040
+#define ASM9260_HW_ICOLL_RAW1				0x0050
+
+#define ASM9260_HW_ICOLL_INTERRUPT0			0x0060
+#define ASM9260_HW_ICOLL_INTERRUPTn(n)		(0x0060 + ((n) >> 2) * 0x10)
+/*
+ * WARNING: Modifying the priority of an enabled interrupt may result in
+ * undefined behavior.
+ */
+#define ASM9260_BM_INT_PRIORITY_MASK			0x3
+#define ASM9260_BM_INT_ENABLE				BIT(2)
+#define ASM9260_BM_INT_SOFTIRQ				BIT(3)
+
+#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)		(((n) & 0x3) << 3)
+#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n)		(1 << (2 + \
+			ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)))
+
+#define ASM9260_HW_ICOLL_VBASE				0x0160
+/*
+ * bits 31:2
+ * This bitfield holds the upper 30 bits of the base address of the vector
+ * table.
+ */
+
+#define ASM9260_HW_ICOLL_CLEAR0				0x01d0
+#define ASM9260_HW_ICOLL_CLEAR1				0x01e0
+#define ASM9260_HW_ICOLL_CLEARn(n)			(((n >> 5) * 0x10) \
+							+ SET_REG)
+#define ASM9260_BM_CLEAR_BIT(n)				BIT(n & 0x1f)
+
+/* Scratchpad */
+#define ASM9260_HW_ICOLL_UNDEF_VECTOR			0x01f0
+#endif
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index d5cf208..c82042c 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -1,5 +1,7 @@
 /*
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *	Add Alphascale ASM9260 support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +30,8 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+#include "alphascale_asm9260-icoll.h"
+
 /*
  * this device provide 4 offsets for each register:
  * 0x0 - plain read write mode
@@ -49,17 +53,41 @@
 
 #define ICOLL_NUM_IRQS		128
 
+enum icoll_type {
+	ICOLL,
+	ASM9260_ICOLL,
+};
+
 struct icoll_priv {
 	void __iomem *vector;
 	void __iomem *levelack;
 	void __iomem *ctrl;
 	void __iomem *stat;
 	void __iomem *intr;
+	void __iomem *clear;
+	enum icoll_type type;
 };
 
 static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & 3) << 3);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> 2) * 0x10);
+}
+
 static void icoll_ack_irq(struct irq_data *d)
 {
 	/*
@@ -83,12 +111,34 @@ static void icoll_unmask_irq(struct irq_data *d)
 			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
+static void asm9260_mask_irq(struct irq_data *d)
+{
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+		     icoll_priv.clear +
+		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+}
+
 static struct irq_chip mxs_icoll_chip = {
 	.irq_ack = icoll_ack_irq,
 	.irq_mask = icoll_mask_irq,
 	.irq_unmask = icoll_unmask_irq,
 };
 
+static struct irq_chip asm9260_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = asm9260_mask_irq,
+	.irq_unmask = asm9260_unmask_irq,
+};
+
 asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
@@ -101,7 +151,14 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
 				irq_hw_number_t hw)
 {
-	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	struct irq_chip *chip;
+
+	if (icoll_priv.type == ICOLL)
+		chip = &mxs_icoll_chip;
+	else
+		chip = &asm9260_icoll_chip;
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
 
 	return 0;
 }
@@ -136,12 +193,15 @@ static int __init icoll_of_init(struct device_node *np,
 {
 	void __iomem *icoll_base;
 
+	icoll_priv.type = ICOLL;
+
 	icoll_base		= icoll_init_iobase(np);
 	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
 	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
 	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
 	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
 	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= NULL;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
@@ -154,3 +214,34 @@ static int __init icoll_of_init(struct device_node *np,
 	return 0;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+	int i;
+
+	icoll_priv.type = ASM9260_ICOLL;
+
+	icoll_base = icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + ASM9260_HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + ASM9260_HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+	writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+			icoll_priv.ctrl);
+	/*
+	 * ASM9260 don't provide reset bit. So, we need to set level 0
+	 * manually.
+	 */
+	for (i = 0; i < 16 * 0x10; i += 0x10)
+		writel(0, icoll_priv.intr + i);
+
+	icoll_add_domain(np, ASM9260_NUM_IRQS);
+
+	return 0;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);
-- 
2.1.4

[tip:irq/core] irqchip/mxs: Add Alphascale ASM9260 support

[tip-bot for Oleksij Rempel]

Commit-ID:  7e4ac676ee468108886f12a20e25795f1c330939
Gitweb:     http://git.kernel.org/tip/7e4ac676ee468108886f12a20e25795f1c330939
Author:     Oleksij Rempel <linux@rempel-privat.de>
AuthorDate: Mon, 12 Oct 2015 21:15:34 +0200
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 14 Oct 2015 09:37:47 +0200

irqchip/mxs: Add Alphascale ASM9260 support

Freescale iMX23/iMX28 and Alphascale ASM9260 have similar interrupt
collectors. We already prepared the mxs driver to handle a different
register layout. Add the actual ASM9260 support.

Differences between these devices:
- Different register offsets
- Different count of interupt lines per register
- ASM9260 does not provide reset bit
- ASM9260 does not support FIQ.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Tested-by: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: marc.zyngier@arm.com
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/1444677334-12242-6-git-send-email-linux@rempel-privat.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/irqchip/Kconfig                    |   5 ++
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  |  93 +++++++++++++++++++++++-
 4 files changed, 207 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 67d8027..4d7294e 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -188,3 +188,8 @@ config IMX_GPCV2
 	select IRQ_DOMAIN
 	help
 	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
+config IRQ_MXS
+	def_bool y if MACH_ASM9260 || ARCH_MXS
+	select IRQ_DOMAIN
+	select STMP_DEVICE
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bb3048f..177f78f 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
-obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
+obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
diff --git a/drivers/irqchip/alphascale_asm9260-icoll.h b/drivers/irqchip/alphascale_asm9260-icoll.h
new file mode 100644
index 0000000..5cec108
--- /dev/null
+++ b/drivers/irqchip/alphascale_asm9260-icoll.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ALPHASCALE_ASM9260_ICOLL_H
+#define _ALPHASCALE_ASM9260_ICOLL_H
+
+#define ASM9260_NUM_IRQS		64
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+
+#define ASM9260_HW_ICOLL_VECTOR				0x0000
+/*
+ * bits 31:2
+ * This register presents the vector address for the interrupt currently
+ * active on the CPU IRQ input. Writing to this register notifies the
+ * interrupt collector that the interrupt service routine for the current
+ * interrupt has been entered.
+ * The exception trap should have a LDPC instruction from this address:
+ * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018
+ */
+
+/*
+ * The Interrupt Collector Level Acknowledge Register is used by software to
+ * indicate the completion of an interrupt on a specific level.
+ * This register is written at the very end of an interrupt service routine. If
+ * nesting is used then the CPU irq must be turned on before writing to this
+ * register to avoid a race condition in the CPU interrupt hardware.
+ */
+#define ASM9260_HW_ICOLL_LEVELACK			0x0010
+#define ASM9260_BM_LEVELn(nr)				BIT(nr)
+
+#define ASM9260_HW_ICOLL_CTRL				0x0020
+/*
+ * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on
+ * asm9260.
+ */
+#define ASM9260_BM_CTRL_SFTRST				BIT(31)
+#define ASM9260_BM_CTRL_CLKGATE				BIT(30)
+/* disable interrupt level nesting */
+#define ASM9260_BM_CTRL_NO_NESTING			BIT(19)
+/*
+ * Set this bit to one enable the RISC32-style read side effect associated with
+ * the vector address register. In this mode, interrupt in-service is signaled
+ * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt
+ * vector address. Set this bit to zero for normal operation, in which the ISR
+ * signals in-service explicitly by means of a write to the
+ * ASM9260_HW_ICOLL_VECTOR register.
+ * 0 - Must Write to Vector register to go in-service.
+ * 1 - Go in-service as a read side effect
+ */
+#define ASM9260_BM_CTRL_ARM_RSE_MODE			BIT(18)
+#define ASM9260_BM_CTRL_IRQ_ENABLE			BIT(16)
+
+#define ASM9260_HW_ICOLL_STAT_OFFSET			0x0030
+/*
+ * bits 5:0
+ * Vector number of current interrupt. Multiply by 4 and add to vector base
+ * address to obtain the value in ASM9260_HW_ICOLL_VECTOR.
+ */
+
+/*
+ * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines
+ * coming from various parts of the chip. Its purpose is to improve diagnostic
+ * observability.
+ */
+#define ASM9260_HW_ICOLL_RAW0				0x0040
+#define ASM9260_HW_ICOLL_RAW1				0x0050
+
+#define ASM9260_HW_ICOLL_INTERRUPT0			0x0060
+#define ASM9260_HW_ICOLL_INTERRUPTn(n)		(0x0060 + ((n) >> 2) * 0x10)
+/*
+ * WARNING: Modifying the priority of an enabled interrupt may result in
+ * undefined behavior.
+ */
+#define ASM9260_BM_INT_PRIORITY_MASK			0x3
+#define ASM9260_BM_INT_ENABLE				BIT(2)
+#define ASM9260_BM_INT_SOFTIRQ				BIT(3)
+
+#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)		(((n) & 0x3) << 3)
+#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n)		(1 << (2 + \
+			ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)))
+
+#define ASM9260_HW_ICOLL_VBASE				0x0160
+/*
+ * bits 31:2
+ * This bitfield holds the upper 30 bits of the base address of the vector
+ * table.
+ */
+
+#define ASM9260_HW_ICOLL_CLEAR0				0x01d0
+#define ASM9260_HW_ICOLL_CLEAR1				0x01e0
+#define ASM9260_HW_ICOLL_CLEARn(n)			(((n >> 5) * 0x10) \
+							+ SET_REG)
+#define ASM9260_BM_CLEAR_BIT(n)				BIT(n & 0x1f)
+
+/* Scratchpad */
+#define ASM9260_HW_ICOLL_UNDEF_VECTOR			0x01f0
+#endif
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index eaab5a6..c22e2d4 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -1,5 +1,7 @@
 /*
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *	Add Alphascale ASM9260 support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +30,8 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+#include "alphascale_asm9260-icoll.h"
+
 /*
  * this device provide 4 offsets for each register:
  * 0x0 - plain read write mode
@@ -49,17 +53,41 @@
 
 #define ICOLL_NUM_IRQS		128
 
+enum icoll_type {
+	ICOLL,
+	ASM9260_ICOLL,
+};
+
 struct icoll_priv {
 	void __iomem *vector;
 	void __iomem *levelack;
 	void __iomem *ctrl;
 	void __iomem *stat;
 	void __iomem *intr;
+	void __iomem *clear;
+	enum icoll_type type;
 };
 
 static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & 3) << 3);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> 2) * 0x10);
+}
+
 static void icoll_ack_irq(struct irq_data *d)
 {
 	/*
@@ -83,12 +111,34 @@ static void icoll_unmask_irq(struct irq_data *d)
 			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
+static void asm9260_mask_irq(struct irq_data *d)
+{
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+		     icoll_priv.clear +
+		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+}
+
 static struct irq_chip mxs_icoll_chip = {
 	.irq_ack = icoll_ack_irq,
 	.irq_mask = icoll_mask_irq,
 	.irq_unmask = icoll_unmask_irq,
 };
 
+static struct irq_chip asm9260_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = asm9260_mask_irq,
+	.irq_unmask = asm9260_unmask_irq,
+};
+
 asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
@@ -101,7 +151,14 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
 				irq_hw_number_t hw)
 {
-	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	struct irq_chip *chip;
+
+	if (icoll_priv.type == ICOLL)
+		chip = &mxs_icoll_chip;
+	else
+		chip = &asm9260_icoll_chip;
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
 
 	return 0;
 }
@@ -136,12 +193,15 @@ static int __init icoll_of_init(struct device_node *np,
 {
 	void __iomem *icoll_base;
 
+	icoll_priv.type = ICOLL;
+
 	icoll_base		= icoll_init_iobase(np);
 	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
 	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
 	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
 	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
 	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= NULL;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
@@ -154,3 +214,34 @@ static int __init icoll_of_init(struct device_node *np,
 	return 0;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+	int i;
+
+	icoll_priv.type = ASM9260_ICOLL;
+
+	icoll_base = icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + ASM9260_HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + ASM9260_HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+	writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+			icoll_priv.ctrl);
+	/*
+	 * ASM9260 don't provide reset bit. So, we need to set level 0
+	 * manually.
+	 */
+	for (i = 0; i < 16 * 0x10; i += 0x10)
+		writel(0, icoll_priv.intr + i);
+
+	icoll_add_domain(np, ASM9260_NUM_IRQS);
+
+	return 0;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);

[PATCH v6 2/2] ARM: irqchip: mxs: add Alphascale ASM9260 support

[Oleksij Rempel]

Freescale iMX23/iMX28 and Alphascale ASM9260 have similar
interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260.
Differences between this devices are fallowing:
- different register offsets
- different count of intterupt lines per register
- ASM9260 don't provide reset bit
- ASM9260 don't support FIQ.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/Kconfig                    |   5 ++
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  |  93 +++++++++++++++++++++++-
 4 files changed, 207 insertions(+), 2 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 27b52c8..0dfd840 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -187,3 +187,8 @@ config IMX_GPCV2
 	select IRQ_DOMAIN
 	help
 	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
+config IRQ_MXS
+	def_bool y if MACH_ASM9260 || ARCH_MXS
+	select IRQ_DOMAIN
+	select STMP_DEVICE
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bb3048f..177f78f 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
-obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
+obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
diff --git a/drivers/irqchip/alphascale_asm9260-icoll.h b/drivers/irqchip/alphascale_asm9260-icoll.h
new file mode 100644
index 0000000..5cec108
--- /dev/null
+++ b/drivers/irqchip/alphascale_asm9260-icoll.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ALPHASCALE_ASM9260_ICOLL_H
+#define _ALPHASCALE_ASM9260_ICOLL_H
+
+#define ASM9260_NUM_IRQS		64
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+
+#define ASM9260_HW_ICOLL_VECTOR				0x0000
+/*
+ * bits 31:2
+ * This register presents the vector address for the interrupt currently
+ * active on the CPU IRQ input. Writing to this register notifies the
+ * interrupt collector that the interrupt service routine for the current
+ * interrupt has been entered.
+ * The exception trap should have a LDPC instruction from this address:
+ * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018
+ */
+
+/*
+ * The Interrupt Collector Level Acknowledge Register is used by software to
+ * indicate the completion of an interrupt on a specific level.
+ * This register is written at the very end of an interrupt service routine. If
+ * nesting is used then the CPU irq must be turned on before writing to this
+ * register to avoid a race condition in the CPU interrupt hardware.
+ */
+#define ASM9260_HW_ICOLL_LEVELACK			0x0010
+#define ASM9260_BM_LEVELn(nr)				BIT(nr)
+
+#define ASM9260_HW_ICOLL_CTRL				0x0020
+/*
+ * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on
+ * asm9260.
+ */
+#define ASM9260_BM_CTRL_SFTRST				BIT(31)
+#define ASM9260_BM_CTRL_CLKGATE				BIT(30)
+/* disable interrupt level nesting */
+#define ASM9260_BM_CTRL_NO_NESTING			BIT(19)
+/*
+ * Set this bit to one enable the RISC32-style read side effect associated with
+ * the vector address register. In this mode, interrupt in-service is signaled
+ * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt
+ * vector address. Set this bit to zero for normal operation, in which the ISR
+ * signals in-service explicitly by means of a write to the
+ * ASM9260_HW_ICOLL_VECTOR register.
+ * 0 - Must Write to Vector register to go in-service.
+ * 1 - Go in-service as a read side effect
+ */
+#define ASM9260_BM_CTRL_ARM_RSE_MODE			BIT(18)
+#define ASM9260_BM_CTRL_IRQ_ENABLE			BIT(16)
+
+#define ASM9260_HW_ICOLL_STAT_OFFSET			0x0030
+/*
+ * bits 5:0
+ * Vector number of current interrupt. Multiply by 4 and add to vector base
+ * address to obtain the value in ASM9260_HW_ICOLL_VECTOR.
+ */
+
+/*
+ * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines
+ * coming from various parts of the chip. Its purpose is to improve diagnostic
+ * observability.
+ */
+#define ASM9260_HW_ICOLL_RAW0				0x0040
+#define ASM9260_HW_ICOLL_RAW1				0x0050
+
+#define ASM9260_HW_ICOLL_INTERRUPT0			0x0060
+#define ASM9260_HW_ICOLL_INTERRUPTn(n)		(0x0060 + ((n) >> 2) * 0x10)
+/*
+ * WARNING: Modifying the priority of an enabled interrupt may result in
+ * undefined behavior.
+ */
+#define ASM9260_BM_INT_PRIORITY_MASK			0x3
+#define ASM9260_BM_INT_ENABLE				BIT(2)
+#define ASM9260_BM_INT_SOFTIRQ				BIT(3)
+
+#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)		(((n) & 0x3) << 3)
+#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n)		(1 << (2 + \
+			ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)))
+
+#define ASM9260_HW_ICOLL_VBASE				0x0160
+/*
+ * bits 31:2
+ * This bitfield holds the upper 30 bits of the base address of the vector
+ * table.
+ */
+
+#define ASM9260_HW_ICOLL_CLEAR0				0x01d0
+#define ASM9260_HW_ICOLL_CLEAR1				0x01e0
+#define ASM9260_HW_ICOLL_CLEARn(n)			(((n >> 5) * 0x10) \
+							+ SET_REG)
+#define ASM9260_BM_CLEAR_BIT(n)				BIT(n & 0x1f)
+
+/* Scratchpad */
+#define ASM9260_HW_ICOLL_UNDEF_VECTOR			0x01f0
+#endif
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 86dec9a..78c2fe7 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -1,5 +1,7 @@
 /*
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *	Add Alphascale ASM9260 support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +30,8 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+#include "alphascale_asm9260-icoll.h"
+
 /*
  * this device provide 4 offsets for each register:
  * 0x0 - plain read write mode
@@ -49,17 +53,41 @@
 
 #define ICOLL_NUM_IRQS		128
 
+enum icoll_type {
+	ICOLL,
+	ASM9260_ICOLL,
+};
+
 struct icoll_priv {
 	void __iomem *vector;
 	void __iomem *levelack;
 	void __iomem *ctrl;
 	void __iomem *stat;
 	void __iomem *intr;
+	void __iomem *clear;
+	enum icoll_type type;
 };
 
 static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & 3) << 3);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> 2) * 0x10);
+}
+
 static void icoll_ack_irq(struct irq_data *d)
 {
 	/*
@@ -83,12 +111,34 @@ static void icoll_unmask_irq(struct irq_data *d)
 			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
+static void asm9260_mask_irq(struct irq_data *d)
+{
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+		     icoll_priv.clear +
+		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+}
+
 static struct irq_chip mxs_icoll_chip = {
 	.irq_ack = icoll_ack_irq,
 	.irq_mask = icoll_mask_irq,
 	.irq_unmask = icoll_unmask_irq,
 };
 
+static struct irq_chip asm9260_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = asm9260_mask_irq,
+	.irq_unmask = asm9260_unmask_irq,
+};
+
 asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
@@ -101,7 +151,14 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
 				irq_hw_number_t hw)
 {
-	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	struct irq_chip *chip;
+
+	if (icoll_priv.type == ICOLL)
+		chip = &mxs_icoll_chip;
+	else
+		chip = &asm9260_icoll_chip;
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
 
 	return 0;
 }
@@ -138,12 +195,15 @@ static int __init icoll_of_init(struct device_node *np,
 {
 	void __iomem *icoll_base;
 
+	icoll_priv.type = ICOLL;
+
 	icoll_base		= icoll_init_iobase(np);
 	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
 	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
 	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
 	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
 	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= NULL;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
@@ -156,3 +216,34 @@ static int __init icoll_of_init(struct device_node *np,
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+	int i;
+
+	icoll_priv.type = ASM9260_ICOLL;
+
+	icoll_base = icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + ASM9260_HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + ASM9260_HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+	writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+			icoll_priv.ctrl);
+	/*
+	 * ASM9260 don't provide reset bit. So, we need to set level 0
+	 * manually.
+	 */
+	for (i = 0; i < 16 * 0x10; i += 0x10)
+		writel(0, icoll_priv.intr + i);
+
+	icoll_add_domain(np, ASM9260_NUM_IRQS);
+
+	return icoll_domain ? 0 : -ENODEV;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);
-- 
2.1.4

[PATCH v4 2/2] ARM: irqchip: mxs: add Alphascale ASM9260 support

[Oleksij Rempel]

Freescale iMX23/iMX28 and Alphascale ASM9260 have similar
interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260.
Differences between this devices are fallowing:
- different register offsets
- different count of intterupt lines per register
- ASM9260 don't provide reset bit
- ASM9260 don't support FIQ.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/irqchip/Kconfig                    |   5 ++
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  |  94 +++++++++++++++++++++++--
 4 files changed, 205 insertions(+), 5 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 27b52c8..0dfd840 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -187,3 +187,8 @@ config IMX_GPCV2
 	select IRQ_DOMAIN
 	help
 	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
+config IRQ_MXS
+	def_bool y if MACH_ASM9260 || ARCH_MXS
+	select IRQ_DOMAIN
+	select STMP_DEVICE
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bb3048f..177f78f 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
-obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
+obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
diff --git a/drivers/irqchip/alphascale_asm9260-icoll.h b/drivers/irqchip/alphascale_asm9260-icoll.h
new file mode 100644
index 0000000..5cec108
--- /dev/null
+++ b/drivers/irqchip/alphascale_asm9260-icoll.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ALPHASCALE_ASM9260_ICOLL_H
+#define _ALPHASCALE_ASM9260_ICOLL_H
+
+#define ASM9260_NUM_IRQS		64
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+
+#define ASM9260_HW_ICOLL_VECTOR				0x0000
+/*
+ * bits 31:2
+ * This register presents the vector address for the interrupt currently
+ * active on the CPU IRQ input. Writing to this register notifies the
+ * interrupt collector that the interrupt service routine for the current
+ * interrupt has been entered.
+ * The exception trap should have a LDPC instruction from this address:
+ * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018
+ */
+
+/*
+ * The Interrupt Collector Level Acknowledge Register is used by software to
+ * indicate the completion of an interrupt on a specific level.
+ * This register is written at the very end of an interrupt service routine. If
+ * nesting is used then the CPU irq must be turned on before writing to this
+ * register to avoid a race condition in the CPU interrupt hardware.
+ */
+#define ASM9260_HW_ICOLL_LEVELACK			0x0010
+#define ASM9260_BM_LEVELn(nr)				BIT(nr)
+
+#define ASM9260_HW_ICOLL_CTRL				0x0020
+/*
+ * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on
+ * asm9260.
+ */
+#define ASM9260_BM_CTRL_SFTRST				BIT(31)
+#define ASM9260_BM_CTRL_CLKGATE				BIT(30)
+/* disable interrupt level nesting */
+#define ASM9260_BM_CTRL_NO_NESTING			BIT(19)
+/*
+ * Set this bit to one enable the RISC32-style read side effect associated with
+ * the vector address register. In this mode, interrupt in-service is signaled
+ * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt
+ * vector address. Set this bit to zero for normal operation, in which the ISR
+ * signals in-service explicitly by means of a write to the
+ * ASM9260_HW_ICOLL_VECTOR register.
+ * 0 - Must Write to Vector register to go in-service.
+ * 1 - Go in-service as a read side effect
+ */
+#define ASM9260_BM_CTRL_ARM_RSE_MODE			BIT(18)
+#define ASM9260_BM_CTRL_IRQ_ENABLE			BIT(16)
+
+#define ASM9260_HW_ICOLL_STAT_OFFSET			0x0030
+/*
+ * bits 5:0
+ * Vector number of current interrupt. Multiply by 4 and add to vector base
+ * address to obtain the value in ASM9260_HW_ICOLL_VECTOR.
+ */
+
+/*
+ * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines
+ * coming from various parts of the chip. Its purpose is to improve diagnostic
+ * observability.
+ */
+#define ASM9260_HW_ICOLL_RAW0				0x0040
+#define ASM9260_HW_ICOLL_RAW1				0x0050
+
+#define ASM9260_HW_ICOLL_INTERRUPT0			0x0060
+#define ASM9260_HW_ICOLL_INTERRUPTn(n)		(0x0060 + ((n) >> 2) * 0x10)
+/*
+ * WARNING: Modifying the priority of an enabled interrupt may result in
+ * undefined behavior.
+ */
+#define ASM9260_BM_INT_PRIORITY_MASK			0x3
+#define ASM9260_BM_INT_ENABLE				BIT(2)
+#define ASM9260_BM_INT_SOFTIRQ				BIT(3)
+
+#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)		(((n) & 0x3) << 3)
+#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n)		(1 << (2 + \
+			ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)))
+
+#define ASM9260_HW_ICOLL_VBASE				0x0160
+/*
+ * bits 31:2
+ * This bitfield holds the upper 30 bits of the base address of the vector
+ * table.
+ */
+
+#define ASM9260_HW_ICOLL_CLEAR0				0x01d0
+#define ASM9260_HW_ICOLL_CLEAR1				0x01e0
+#define ASM9260_HW_ICOLL_CLEARn(n)			(((n >> 5) * 0x10) \
+							+ SET_REG)
+#define ASM9260_BM_CLEAR_BIT(n)				BIT(n & 0x1f)
+
+/* Scratchpad */
+#define ASM9260_HW_ICOLL_UNDEF_VECTOR			0x01f0
+#endif
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index a8e14c3..78c2fe7 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -1,5 +1,7 @@
 /*
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *	Add Alphascale ASM9260 support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +30,8 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+#include "alphascale_asm9260-icoll.h"
+
 /*
  * this device provide 4 offsets for each register:
  * 0x0 - plain read write mode
@@ -49,20 +53,41 @@
 
 #define ICOLL_NUM_IRQS		128
 
+enum icoll_type {
+	ICOLL,
+	ASM9260_ICOLL,
+};
+
 struct icoll_priv {
 	void __iomem *vector;
 	void __iomem *levelack;
 	void __iomem *ctrl;
 	void __iomem *stat;
 	void __iomem *intr;
-	/* number of interrupts per register */
-	int intr_per_reg;
 	void __iomem *clear;
+	enum icoll_type type;
 };
 
 static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & 3) << 3);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> 2) * 0x10);
+}
+
 static void icoll_ack_irq(struct irq_data *d)
 {
 	/*
@@ -86,12 +111,34 @@ static void icoll_unmask_irq(struct irq_data *d)
 			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
+static void asm9260_mask_irq(struct irq_data *d)
+{
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+		     icoll_priv.clear +
+		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+}
+
 static struct irq_chip mxs_icoll_chip = {
 	.irq_ack = icoll_ack_irq,
 	.irq_mask = icoll_mask_irq,
 	.irq_unmask = icoll_unmask_irq,
 };
 
+static struct irq_chip asm9260_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = asm9260_mask_irq,
+	.irq_unmask = asm9260_unmask_irq,
+};
+
 asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
@@ -104,7 +151,14 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
 				irq_hw_number_t hw)
 {
-	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	struct irq_chip *chip;
+
+	if (icoll_priv.type == ICOLL)
+		chip = &mxs_icoll_chip;
+	else
+		chip = &asm9260_icoll_chip;
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
 
 	return 0;
 }
@@ -141,13 +195,14 @@ static int __init icoll_of_init(struct device_node *np,
 {
 	void __iomem *icoll_base;
 
+	icoll_priv.type = ICOLL;
+
 	icoll_base		= icoll_init_iobase(np);
 	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
 	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
 	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
 	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
 	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
-	icoll_priv.intr_per_reg	= 1;
 	icoll_priv.clear	= NULL;
 
 	/*
@@ -161,3 +216,34 @@ static int __init icoll_of_init(struct device_node *np,
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+	int i;
+
+	icoll_priv.type = ASM9260_ICOLL;
+
+	icoll_base = icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + ASM9260_HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + ASM9260_HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+	writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+			icoll_priv.ctrl);
+	/*
+	 * ASM9260 don't provide reset bit. So, we need to set level 0
+	 * manually.
+	 */
+	for (i = 0; i < 16 * 0x10; i += 0x10)
+		writel(0, icoll_priv.intr + i);
+
+	icoll_add_domain(np, ASM9260_NUM_IRQS);
+
+	return icoll_domain ? 0 : -ENODEV;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);
-- 
2.5.0

[PATCH v2 2/2] ARM: irqchip: mxs: add Alpascale ASM9260 support

[Oleksij Rempel]

From: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>

Freescale iMX23/iMX28 and Alphascale ASM9260 have similar
interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260.
Differences between this devices are fallowing:
- different register offsets
- different count of intterupt lines per register
- ASM9260 don't provide reset bit
- ASM9260 don't support FIQ.

Signed-off-by: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>
---
 drivers/irqchip/Kconfig                    |   5 ++
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  | 106 +++++++++++++++++++++++++++-
 4 files changed, 220 insertions(+), 2 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 27b52c8..0dfd840 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -187,3 +187,8 @@ config IMX_GPCV2
 	select IRQ_DOMAIN
 	help
 	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
+config IRQ_MXS
+	def_bool y if MACH_ASM9260 || ARCH_MXS
+	select IRQ_DOMAIN
+	select STMP_DEVICE
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bb3048f..177f78f 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
-obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
+obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
diff --git a/drivers/irqchip/alphascale_asm9260-icoll.h b/drivers/irqchip/alphascale_asm9260-icoll.h
new file mode 100644
index 0000000..5cec108
--- /dev/null
+++ b/drivers/irqchip/alphascale_asm9260-icoll.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ALPHASCALE_ASM9260_ICOLL_H
+#define _ALPHASCALE_ASM9260_ICOLL_H
+
+#define ASM9260_NUM_IRQS		64
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+
+#define ASM9260_HW_ICOLL_VECTOR				0x0000
+/*
+ * bits 31:2
+ * This register presents the vector address for the interrupt currently
+ * active on the CPU IRQ input. Writing to this register notifies the
+ * interrupt collector that the interrupt service routine for the current
+ * interrupt has been entered.
+ * The exception trap should have a LDPC instruction from this address:
+ * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018
+ */
+
+/*
+ * The Interrupt Collector Level Acknowledge Register is used by software to
+ * indicate the completion of an interrupt on a specific level.
+ * This register is written at the very end of an interrupt service routine. If
+ * nesting is used then the CPU irq must be turned on before writing to this
+ * register to avoid a race condition in the CPU interrupt hardware.
+ */
+#define ASM9260_HW_ICOLL_LEVELACK			0x0010
+#define ASM9260_BM_LEVELn(nr)				BIT(nr)
+
+#define ASM9260_HW_ICOLL_CTRL				0x0020
+/*
+ * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on
+ * asm9260.
+ */
+#define ASM9260_BM_CTRL_SFTRST				BIT(31)
+#define ASM9260_BM_CTRL_CLKGATE				BIT(30)
+/* disable interrupt level nesting */
+#define ASM9260_BM_CTRL_NO_NESTING			BIT(19)
+/*
+ * Set this bit to one enable the RISC32-style read side effect associated with
+ * the vector address register. In this mode, interrupt in-service is signaled
+ * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt
+ * vector address. Set this bit to zero for normal operation, in which the ISR
+ * signals in-service explicitly by means of a write to the
+ * ASM9260_HW_ICOLL_VECTOR register.
+ * 0 - Must Write to Vector register to go in-service.
+ * 1 - Go in-service as a read side effect
+ */
+#define ASM9260_BM_CTRL_ARM_RSE_MODE			BIT(18)
+#define ASM9260_BM_CTRL_IRQ_ENABLE			BIT(16)
+
+#define ASM9260_HW_ICOLL_STAT_OFFSET			0x0030
+/*
+ * bits 5:0
+ * Vector number of current interrupt. Multiply by 4 and add to vector base
+ * address to obtain the value in ASM9260_HW_ICOLL_VECTOR.
+ */
+
+/*
+ * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines
+ * coming from various parts of the chip. Its purpose is to improve diagnostic
+ * observability.
+ */
+#define ASM9260_HW_ICOLL_RAW0				0x0040
+#define ASM9260_HW_ICOLL_RAW1				0x0050
+
+#define ASM9260_HW_ICOLL_INTERRUPT0			0x0060
+#define ASM9260_HW_ICOLL_INTERRUPTn(n)		(0x0060 + ((n) >> 2) * 0x10)
+/*
+ * WARNING: Modifying the priority of an enabled interrupt may result in
+ * undefined behavior.
+ */
+#define ASM9260_BM_INT_PRIORITY_MASK			0x3
+#define ASM9260_BM_INT_ENABLE				BIT(2)
+#define ASM9260_BM_INT_SOFTIRQ				BIT(3)
+
+#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)		(((n) & 0x3) << 3)
+#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n)		(1 << (2 + \
+			ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)))
+
+#define ASM9260_HW_ICOLL_VBASE				0x0160
+/*
+ * bits 31:2
+ * This bitfield holds the upper 30 bits of the base address of the vector
+ * table.
+ */
+
+#define ASM9260_HW_ICOLL_CLEAR0				0x01d0
+#define ASM9260_HW_ICOLL_CLEAR1				0x01e0
+#define ASM9260_HW_ICOLL_CLEARn(n)			(((n >> 5) * 0x10) \
+							+ SET_REG)
+#define ASM9260_BM_CLEAR_BIT(n)				BIT(n & 0x1f)
+
+/* Scratchpad */
+#define ASM9260_HW_ICOLL_UNDEF_VECTOR			0x01f0
+#endif
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 14374de..1470087 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -1,5 +1,7 @@
 /*
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *	Add Alphascale ASM9260 support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +30,8 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+#include "alphascale_asm9260-icoll.h"
+
 /*
  * this device provide 4 offsets for each register:
  * 0x0 - plain read write mode
@@ -49,6 +53,11 @@
 
 #define ICOLL_NUM_IRQS		128
 
+enum icoll_type {
+	ICOLL,
+	ASM9260_ICOLL,
+};
+
 struct icoll_priv {
 	void __iomem *vector;
 	void __iomem *levelack;
@@ -58,10 +67,38 @@ struct icoll_priv {
 	/* number of interrupts per register */
 	int intr_per_reg;
 	void __iomem *clear;
+	enum icoll_type type;
 };
 
 static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
+static DEFINE_RAW_SPINLOCK(icoll_lock);
+
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * We expect intr_per_reg to be 4 or 1, it means
+	 * "n" will be 3 or 0.
+	 */
+	int n = icoll_priv.intr_per_reg - 1;
+
+	/*
+	 * If n = 0, "bit" is never shifted.
+	 * If n = 3, mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & n) << n);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	int n = icoll_priv.intr_per_reg >> 1;
+
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> n) * 0x10);
+}
 
 static void icoll_ack_irq(struct irq_data *d)
 {
@@ -86,12 +123,38 @@ static void icoll_unmask_irq(struct irq_data *d)
 			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
+static void asm9260_mask_irq(struct irq_data *d)
+{
+	raw_spin_lock(&icoll_lock);
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
+	raw_spin_unlock(&icoll_lock);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+	raw_spin_lock(&icoll_lock);
+	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+		     icoll_priv.clear +
+		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+	raw_spin_unlock(&icoll_lock);
+}
+
 static struct irq_chip mxs_icoll_chip = {
 	.irq_ack = icoll_ack_irq,
 	.irq_mask = icoll_mask_irq,
 	.irq_unmask = icoll_unmask_irq,
 };
 
+static struct irq_chip asm9260_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = asm9260_mask_irq,
+	.irq_unmask = asm9260_unmask_irq,
+};
+
 asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
@@ -104,7 +167,14 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
 				irq_hw_number_t hw)
 {
-	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	struct irq_chip *chip;
+
+	if (icoll_priv.type == ICOLL)
+		chip = &mxs_icoll_chip;
+	else
+		chip = &asm9260_icoll_chip;
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
 	set_irq_flags(virq, IRQF_VALID);
 
 	return 0;
@@ -142,6 +212,8 @@ static int __init icoll_of_init(struct device_node *np,
 {
 	void __iomem *icoll_base;
 
+	icoll_priv.type = ICOLL;
+
 	icoll_base		= icoll_init_iobase(np);
 	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
 	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
@@ -162,3 +234,35 @@ static int __init icoll_of_init(struct device_node *np,
 	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+	int i;
+
+	icoll_priv.type = ASM9260_ICOLL;
+
+	icoll_base = icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + ASM9260_HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + ASM9260_HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+	icoll_priv.intr_per_reg	= 4;
+	icoll_priv.clear	= icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+	writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+			icoll_priv.ctrl);
+	/*
+	 * ASM9260 don't provide reset bit. So, we need to set level 0
+	 * manually.
+	 */
+	for (i = 0; i < 16 * 0x10; i += 0x10)
+		writel(0, icoll_priv.intr + i);
+
+	icoll_add_domain(np, ASM9260_NUM_IRQS);
+
+	return icoll_domain ? 0 : -ENODEV;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);
-- 
2.5.0

Re: [PATCH v2 0/2] changelog

[Marc Zyngier]

On Fri, 18 Sep 2015 11:18:40 +0200
Oleksij Rempel <linux@rempel-privat.de> wrote:

Hi Oleksij,

> v2:
> - move some parts from patch 2 to 1
> - make separate irq_chip for ICOLL and ASM9260 
> 
> Oleksij Rempel (2):
>   ARM: irqchip: mxs: prepare driver for HW with different offsets
>   ARM: irqchip: mxs: add Alpascale ASM9260 support
> 
>  drivers/irqchip/Kconfig                    |   5 +
>  drivers/irqchip/Makefile                   |   2 +-
>  drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++
>  drivers/irqchip/irq-mxs.c                  | 188 ++++++++++++++++++++++++++---
>  4 files changed, 286 insertions(+), 18 deletions(-)
>  create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h
> 

Next time, please add a sensible title to your cover letter. Something
like "Add support for ASM9260 interrupt controller". "changelog" is
hardly a useful subject when you're dealing with a few dozen of patches
at the same time.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny.

Re: [PATCH v2 0/2] changelog

[Thomas Gleixner]

On Fri, 18 Sep 2015, Oleksij Rempel wrote:

'changelog' is not really a descriptive subject line for a cover
letter.

Thanks,

	tglx