[PATCH 0/5] support gpmi on i.MX6UL/7D and HW bitflip on i.MX6QP/7D

[PATCH 0/5] support gpmi on i.MX6UL/7D and HW bitflip on i.MX6QP/7D

[Han Xu]

add support for gpmi nand on i.MX6UL and i.MX7D, document the related
properties in DT and add the HW bitflip detection and correction for
i.MX6QP and i.MX7D.

The two document related patch are new and other three patches have no code
change.

Han Xu (5):
  mtd: nand: gpmi: add GPMI NAND support for i.MX7D
  mtd: nand: gpmi: document the clocks and clock-names in DT property
  mtd: nand: gpmi: correct bitflip for erased NAND page
  mtd: nand: gpmi: support NAND on i.MX6UL
  mtd: nand: gpmi: document the new supported chip in DT

 .../devicetree/bindings/mtd/gpmi-nand.txt          | 12 ++++-
 drivers/mtd/nand/gpmi-nand/bch-regs.h              | 24 ++++++---
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c              | 15 ++++--
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c             | 60 +++++++++++++++++++---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.h             | 14 +++--
 5 files changed, 104 insertions(+), 21 deletions(-)

-- 
1.9.1

[PATCH 1/5] mtd: nand: gpmi: add GPMI NAND support for i.MX7D

[Han Xu]

From: Han Xu <b45815@freescale.com>

support GPMI NAND on i.MX7D

Signed-off-by: Han Xu <b45815@freescale.com>
---
 drivers/mtd/nand/gpmi-nand/bch-regs.h  | 14 +++++++-------
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c  | 10 ++++++----
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 27 ++++++++++++++++++++++-----
 drivers/mtd/nand/gpmi-nand/gpmi-nand.h |  7 +++++--
 4 files changed, 40 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
index 05bb91f..53e58bc 100644
--- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -1,7 +1,7 @@
 /*
  * Freescale GPMI NAND Flash Driver
  *
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008-2015 Freescale Semiconductor, Inc.
  * Copyright 2008 Embedded Alley Solutions, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -54,7 +54,7 @@
 #define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0		11
 #define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
 #define BF_BCH_FLASH0LAYOUT0_ECC0(v, x)				\
-	(GPMI_IS_MX6(x)					\
+	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))				\
 		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0)	\
 		: (((v) << BP_BCH_FLASH0LAYOUT0_ECC0)		\
@@ -65,7 +65,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14			\
 				(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)
 #define BF_BCH_FLASH0LAYOUT0_GF(v, x)				\
-	((GPMI_IS_MX6(x) && ((v) == 14))			\
+	(((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) && ((v) == 14))\
 		? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14)	\
 		: 0						\
@@ -77,7 +77,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	\
 			(0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
 #define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x)				\
-	(GPMI_IS_MX6(x)						\
+	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))	\
 		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)	\
 		: ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)		\
 	)
@@ -96,7 +96,7 @@
 #define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN		11
 #define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
 #define BF_BCH_FLASH0LAYOUT1_ECCN(v, x)				\
-	(GPMI_IS_MX6(x)					\
+	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))				\
 		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN)	\
 		: (((v) << BP_BCH_FLASH0LAYOUT1_ECCN)		\
@@ -107,7 +107,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14			\
 				(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)
 #define BF_BCH_FLASH0LAYOUT1_GF(v, x)				\
-	((GPMI_IS_MX6(x) && ((v) == 14))			\
+	(((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) && ((v) == 14))\
 		? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14)	\
 		: 0						\
@@ -119,7 +119,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	\
 			(0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
 #define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x)				\
-	(GPMI_IS_MX6(x)						\
+	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))	\
 		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)	\
 		: ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)		\
 	)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 0f68a99..8acbe04 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -1,7 +1,7 @@
 /*
  * Freescale GPMI NAND Flash Driver
  *
- * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008-2015 Freescale Semiconductor, Inc.
  * Copyright (C) 2008 Embedded Alley Solutions, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -971,7 +971,8 @@ int gpmi_extra_init(struct gpmi_nand_data *this)
 	struct nand_chip *chip = &this->nand;
 
 	/* Enable the asynchronous EDO feature. */
-	if (GPMI_IS_MX6(this) && chip->onfi_version) {
+	if ((GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) &&
+			chip->onfi_version) {
 		int mode = onfi_get_async_timing_mode(chip);
 
 		/* We only support the timing mode 4 and mode 5. */
@@ -1093,12 +1094,13 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
 	if (GPMI_IS_MX23(this)) {
 		mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
 		reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
-	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) {
+	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this) ||
+			GPMI_IS_MX7(this)) {
 		/*
 		 * In the imx6, all the ready/busy pins are bound
 		 * together. So we only need to check chip 0.
 		 */
-		if (GPMI_IS_MX6(this))
+		if (GPMI_IS_MX6(this) || GPMI_IS_MX7(this))
 			chip = 0;
 
 		/* MX28 shares the same R/B register as MX6Q. */
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 8122c69..1aba6e6 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -77,6 +77,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6sx = {
 	.max_chain_delay = 12,
 };
 
+static const struct gpmi_devdata gpmi_devdata_imx7d = {
+	.type = IS_MX7D,
+	.bch_max_ecc_strength = 62,
+	.max_chain_delay = 12,
+};
+
 static irqreturn_t bch_irq(int irq, void *cookie)
 {
 	struct gpmi_nand_data *this = cookie;
@@ -575,6 +581,10 @@ static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
 	"gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
 };
 
+static char *extra_clks_for_mx7d[GPMI_CLK_MAX] = {
+	"gpmi_bch_apb",
+};
+
 static int gpmi_get_clks(struct gpmi_nand_data *this)
 {
 	struct resources *r = &this->resources;
@@ -592,6 +602,8 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
 	/* Get extra clocks */
 	if (GPMI_IS_MX6(this))
 		extra_clks = extra_clks_for_mx6q;
+	if (GPMI_IS_MX7(this))
+		extra_clks = extra_clks_for_mx7d;
 	if (!extra_clks)
 		return 0;
 
@@ -608,7 +620,7 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
 		r->clock[i] = clk;
 	}
 
-	if (GPMI_IS_MX6(this))
+	if (GPMI_IS_MX6(this) || GPMI_IS_MX7(this))
 		/*
 		 * Set the default value for the gpmi clock.
 		 *
@@ -1868,8 +1880,8 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
 	 *  (1) the chip is imx6, and
 	 *  (2) the size of the ECC parity is byte aligned.
 	 */
-	if (GPMI_IS_MX6(this) &&
-		((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
+	if ((GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) &&
+			((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
 		ecc->read_subpage = gpmi_ecc_read_subpage;
 		chip->options |= NAND_SUBPAGE_READ;
 	}
@@ -1934,7 +1946,8 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	if (ret)
 		goto err_out;
 
-	ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL);
+	ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ||
+			GPMI_IS_MX7(this) ? 2 : 1, NULL);
 	if (ret)
 		goto err_out;
 
@@ -1977,7 +1990,11 @@ static const struct of_device_id gpmi_nand_id_table[] = {
 	}, {
 		.compatible = "fsl,imx6sx-gpmi-nand",
 		.data = &gpmi_devdata_imx6sx,
-	}, {}
+	}, {
+		.compatible = "fsl,imx7d-gpmi-nand",
+		.data = (void *)&gpmi_devdata_imx7d,
+	}, { /* sentinel */ }
+
 };
 MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
 
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 4e49a1f..a82555f 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -1,7 +1,7 @@
 /*
  * Freescale GPMI NAND Flash Driver
  *
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
  * Copyright (C) 2008 Embedded Alley Solutions, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -123,7 +123,8 @@ enum gpmi_type {
 	IS_MX23,
 	IS_MX28,
 	IS_MX6Q,
-	IS_MX6SX
+	IS_MX6SX,
+	IS_MX7D,
 };
 
 struct gpmi_devdata {
@@ -305,6 +306,8 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
 #define GPMI_IS_MX28(x)		((x)->devdata->type == IS_MX28)
 #define GPMI_IS_MX6Q(x)		((x)->devdata->type == IS_MX6Q)
 #define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
+#define GPMI_IS_MX7D(x)		((x)->devdata->type == IS_MX7D)
 
 #define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
+#define GPMI_IS_MX7(x)		(GPMI_IS_MX7D(x))
 #endif
-- 
1.9.1

Re: [PATCH 1/5] mtd: nand: gpmi: add GPMI NAND support for i.MX7D

[Boris Brezillon]

On Tue, 23 Feb 2016 17:04:49 -0600
Han Xu <han.xu@nxp.com> wrote:

> From: Han Xu <b45815@freescale.com>
> 
> support GPMI NAND on i.MX7D
> 
> Signed-off-by: Han Xu <b45815@freescale.com>
> ---
>  drivers/mtd/nand/gpmi-nand/bch-regs.h  | 14 +++++++-------
>  drivers/mtd/nand/gpmi-nand/gpmi-lib.c  | 10 ++++++----
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 27 ++++++++++++++++++++++-----
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.h |  7 +++++--
>  4 files changed, 40 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> index 05bb91f..53e58bc 100644
> --- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
> +++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> @@ -1,7 +1,7 @@
>  /*
>   * Freescale GPMI NAND Flash Driver
>   *
> - * Copyright 2008-2011 Freescale Semiconductor, Inc.
> + * Copyright 2008-2015 Freescale Semiconductor, Inc.
>   * Copyright 2008 Embedded Alley Solutions, Inc.
>   *
>   * This program is free software; you can redistribute it and/or modify
> @@ -54,7 +54,7 @@
>  #define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0		11
>  #define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
>  #define BF_BCH_FLASH0LAYOUT0_ECC0(v, x)				\
> -	(GPMI_IS_MX6(x)					\
> +	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))				\
>  		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)	\
>  			& MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0)	\
>  		: (((v) << BP_BCH_FLASH0LAYOUT0_ECC0)		\
> @@ -65,7 +65,7 @@
>  #define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14			\
>  				(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)
>  #define BF_BCH_FLASH0LAYOUT0_GF(v, x)				\
> -	((GPMI_IS_MX6(x) && ((v) == 14))			\
> +	(((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) && ((v) == 14))\

Missing tab at the end of the line ")	\"

>  		? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)	\
>  			& MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14)	\
>  		: 0						\
> @@ -77,7 +77,7 @@
>  #define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	\
>  			(0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
>  #define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x)				\
> -	(GPMI_IS_MX6(x)						\
> +	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))	\
>  		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)	\
>  		: ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)		\
>  	)
> @@ -96,7 +96,7 @@
>  #define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN		11
>  #define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
>  #define BF_BCH_FLASH0LAYOUT1_ECCN(v, x)				\
> -	(GPMI_IS_MX6(x)					\
> +	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))				\
>  		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)	\
>  			& MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN)	\
>  		: (((v) << BP_BCH_FLASH0LAYOUT1_ECCN)		\
> @@ -107,7 +107,7 @@
>  #define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14			\
>  				(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)
>  #define BF_BCH_FLASH0LAYOUT1_GF(v, x)				\
> -	((GPMI_IS_MX6(x) && ((v) == 14))			\
> +	(((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) && ((v) == 14))\

Ditto.

>  		? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)	\
>  			& MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14)	\
>  		: 0						\
> @@ -119,7 +119,7 @@
>  #define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	\
>  			(0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
>  #define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x)				\
> -	(GPMI_IS_MX6(x)						\
> +	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))	\
>  		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)	\
>  		: ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)		\
>  	)
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> index 0f68a99..8acbe04 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> @@ -1,7 +1,7 @@
>  /*
>   * Freescale GPMI NAND Flash Driver
>   *
> - * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
> + * Copyright (C) 2008-2015 Freescale Semiconductor, Inc.
>   * Copyright (C) 2008 Embedded Alley Solutions, Inc.
>   *
>   * This program is free software; you can redistribute it and/or modify
> @@ -971,7 +971,8 @@ int gpmi_extra_init(struct gpmi_nand_data *this)
>  	struct nand_chip *chip = &this->nand;
>  
>  	/* Enable the asynchronous EDO feature. */
> -	if (GPMI_IS_MX6(this) && chip->onfi_version) {
> +	if ((GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) &&
> +			chip->onfi_version) {

Align this to the open parenthesis.

>  		int mode = onfi_get_async_timing_mode(chip);
>  
>  		/* We only support the timing mode 4 and mode 5. */
> @@ -1093,12 +1094,13 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
>  	if (GPMI_IS_MX23(this)) {
>  		mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
>  		reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
> -	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) {
> +	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this) ||
> +			GPMI_IS_MX7(this)) {

Ditto.

>  		/*
>  		 * In the imx6, all the ready/busy pins are bound
>  		 * together. So we only need to check chip 0.
>  		 */
> -		if (GPMI_IS_MX6(this))
> +		if (GPMI_IS_MX6(this) || GPMI_IS_MX7(this))
>  			chip = 0;
>  
>  		/* MX28 shares the same R/B register as MX6Q. */
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 8122c69..1aba6e6 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -77,6 +77,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6sx = {
>  	.max_chain_delay = 12,
>  };
>  
> +static const struct gpmi_devdata gpmi_devdata_imx7d = {
> +	.type = IS_MX7D,
> +	.bch_max_ecc_strength = 62,
> +	.max_chain_delay = 12,
> +};
> +
>  static irqreturn_t bch_irq(int irq, void *cookie)
>  {
>  	struct gpmi_nand_data *this = cookie;
> @@ -575,6 +581,10 @@ static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
>  	"gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
>  };
>  
> +static char *extra_clks_for_mx7d[GPMI_CLK_MAX] = {
> +	"gpmi_bch_apb",
> +};
> +
>  static int gpmi_get_clks(struct gpmi_nand_data *this)
>  {
>  	struct resources *r = &this->resources;
> @@ -592,6 +602,8 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
>  	/* Get extra clocks */
>  	if (GPMI_IS_MX6(this))
>  		extra_clks = extra_clks_for_mx6q;
> +	if (GPMI_IS_MX7(this))
> +		extra_clks = extra_clks_for_mx7d;
>  	if (!extra_clks)
>  		return 0;
>  
> @@ -608,7 +620,7 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
>  		r->clock[i] = clk;
>  	}
>  
> -	if (GPMI_IS_MX6(this))
> +	if (GPMI_IS_MX6(this) || GPMI_IS_MX7(this))
>  		/*
>  		 * Set the default value for the gpmi clock.
>  		 *
> @@ -1868,8 +1880,8 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
>  	 *  (1) the chip is imx6, and
>  	 *  (2) the size of the ECC parity is byte aligned.
>  	 */
> -	if (GPMI_IS_MX6(this) &&
> -		((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
> +	if ((GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) &&
> +			((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {

Why did you add a tab on the seconf line of the test?

Please try to keep everything aligned on the open parenthesis. The
only exception to this rule should be when your line exceed 80
characters.

	if ((GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) &&
	    ((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {

>  		ecc->read_subpage = gpmi_ecc_read_subpage;
>  		chip->options |= NAND_SUBPAGE_READ;
>  	}
> @@ -1934,7 +1946,8 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
>  	if (ret)
>  		goto err_out;
>  
> -	ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL);
> +	ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ||
> +			GPMI_IS_MX7(this) ? 2 : 1, NULL);

Ditto:

	ret = nand_scan_ident(mtd,
			      (GPMI_IS_MX6(this) ||
	GPMI_IS_MX7(this)) ? 2 : 1,
			      NULL);

or even better

	max_chips = (GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) ? 2 : 1;
	ret = nand_scan_ident(mtd, max_chips, NULL);

>  	if (ret)
>  		goto err_out;
>  
> @@ -1977,7 +1990,11 @@ static const struct of_device_id gpmi_nand_id_table[] = {
>  	}, {
>  		.compatible = "fsl,imx6sx-gpmi-nand",
>  		.data = &gpmi_devdata_imx6sx,
> -	}, {}
> +	}, {
> +		.compatible = "fsl,imx7d-gpmi-nand",
> +		.data = (void *)&gpmi_devdata_imx7d,

Drop the (void *) cast.


-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH 2/5] mtd: nand: gpmi: document the clocks and clock-names in DT property

[Han Xu]

add the clocks and clock-names in DT property, gpmi-io clock is
mandatory for all platforms, but some platforms, such as i.MX6Q may
need more extra clocks for submodules. More details please refer to the
SoC reference manual.

Signed-off-by: Han Xu <han.xu@nxp.com>
---
 Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index d02acaf..c8d0e2f 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -13,6 +13,13 @@ Required properties:
     and GPMI DMA channel ID.
     Refer to dma.txt and fsl-mxs-dma.txt for details.
   - dma-names: Must be "rx-tx".
+  - clocks : The clocks needed by the gpmi controller. This field varies
+    depends on the SoC design, "gpmi-io" is mandatory but some platforms may
+    need several extra clocks, such as i.MX6Q, it requires "gpmi_apb,
+    gpmi_bch, gpmi_bch_apb and per1_bch" for all submodules. Please refer to
+    the HW design manual.
+  - clock-names : the name of the clocks, please refer to the HW design
+    manual.
 
 Optional properties:
   - nand-on-flash-bbt: boolean to enable on flash bbt option if not
@@ -51,6 +58,8 @@ gpmi-nand@8000c000 {
 	interrupt-names = "bch";
 	dmas = <&dma_apbh 4>;
 	dma-names = "rx-tx";
+	clocks = <&clks 50>,;
+	clock-names = "gpmi_io";
 
 	partition@0 {
 	...
-- 
1.9.1

Re: [PATCH 2/5] mtd: nand: gpmi: document the clocks and clock-names in DT property

[Boris Brezillon]

Hi Han,

On Tue, 23 Feb 2016 17:04:50 -0600
Han Xu <han.xu@nxp.com> wrote:

> add the clocks and clock-names in DT property, gpmi-io clock is
> mandatory for all platforms, but some platforms, such as i.MX6Q may
> need more extra clocks for submodules. More details please refer to the
> SoC reference manual.
> 
> Signed-off-by: Han Xu <han.xu@nxp.com>
> ---
>  Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 9 +++++++++

Please make sure you add the DT maintainers (and the DT ML) in Cc when
you update DT bindings.

Best Regards,

Boris

>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
> index d02acaf..c8d0e2f 100644
> --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
> @@ -13,6 +13,13 @@ Required properties:
>      and GPMI DMA channel ID.
>      Refer to dma.txt and fsl-mxs-dma.txt for details.
>    - dma-names: Must be "rx-tx".
> +  - clocks : The clocks needed by the gpmi controller. This field varies
> +    depends on the SoC design, "gpmi-io" is mandatory but some platforms may
> +    need several extra clocks, such as i.MX6Q, it requires "gpmi_apb,
> +    gpmi_bch, gpmi_bch_apb and per1_bch" for all submodules. Please refer to
> +    the HW design manual.
> +  - clock-names : the name of the clocks, please refer to the HW design
> +    manual.
>  
>  Optional properties:
>    - nand-on-flash-bbt: boolean to enable on flash bbt option if not
> @@ -51,6 +58,8 @@ gpmi-nand@8000c000 {
>  	interrupt-names = "bch";
>  	dmas = <&dma_apbh 4>;
>  	dma-names = "rx-tx";
> +	clocks = <&clks 50>,;
> +	clock-names = "gpmi_io";
>  
>  	partition@0 {
>  	...



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH 3/5] mtd: nand: gpmi: correct bitflip for erased NAND page

[Han Xu]

i.MX6QP and i.MX7D BCH module integrated a new feature to detect the
bitflip number for erased NAND page. So for these two platform, set the
erase threshold to ecc_strength and if bitflip detected, GPMI driver will
correct the data to all 0xFF.

Signed-off-by: Han Xu <han.xu@nxp.com>
---
 drivers/mtd/nand/gpmi-nand/bch-regs.h  | 10 ++++++++++
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c  |  5 +++++
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 24 +++++++++++++++++++++++-
 drivers/mtd/nand/gpmi-nand/gpmi-nand.h |  5 ++++-
 4 files changed, 42 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
index 53e58bc..a84d72b 100644
--- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -30,7 +30,13 @@
 #define BM_BCH_CTRL_COMPLETE_IRQ		(1 << 0)
 
 #define HW_BCH_STATUS0				0x00000010
+
 #define HW_BCH_MODE				0x00000020
+#define BP_BCH_MODE_ERASE_THRESHOLD		0
+#define BM_BCH_MODE_ERASE_THRESHOLD	(0xff << BP_BCH_MODE_ERASE_THRESHOLD)
+#define BF_BCH_MODE_ERASE_THRESHOLD(v)		\
+	(((v) << BP_BCH_MODE_ERASE_THRESHOLD) & BM_BCH_MODE_ERASE_THRESHOLD)
+
 #define HW_BCH_ENCODEPTR			0x00000030
 #define HW_BCH_DATAPTR				0x00000040
 #define HW_BCH_METAPTR				0x00000050
@@ -125,4 +131,8 @@
 	)
 
 #define HW_BCH_VERSION				0x00000160
+#define HW_BCH_DEBUG1				0x00000170
+#define BP_BCH_DEBUG1_ERASED_ZERO_COUNT	0
+#define BM_BCH_DEBUG1_ERASED_ZERO_COUNT		\
+		(0x1ff << BP_BCH_DEBUG1_ERASED_ZERO_COUNT)
 #endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 8acbe04..2c43213 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -298,6 +298,11 @@ int bch_set_geometry(struct gpmi_nand_data *this)
 			| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
 			r->bch_regs + HW_BCH_FLASH0LAYOUT1);
 
+	/* Set erase threshold to ecc_strength for mx6qp and mx7 */
+	if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))
+		writel(BF_BCH_MODE_ERASE_THRESHOLD(ecc_strength),
+			r->bch_regs + HW_BCH_MODE);
+
 	/* Set *all* chip selects to use layout 0. */
 	writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
 
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 1aba6e6..6b3ca3b 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -71,6 +71,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6q = {
 	.max_chain_delay = 12,
 };
 
+static const struct gpmi_devdata gpmi_devdata_imx6qp = {
+	.type = IS_MX6QP,
+	.bch_max_ecc_strength = 40,
+	.max_chain_delay = 12,
+};
+
 static const struct gpmi_devdata gpmi_devdata_imx6sx = {
 	.type = IS_MX6SX,
 	.bch_max_ecc_strength = 62,
@@ -1010,6 +1016,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 {
 	struct gpmi_nand_data *this = nand_get_controller_data(chip);
 	struct bch_geometry *nfc_geo = &this->bch_geometry;
+	void __iomem *bch_regs = this->resources.bch_regs;
 	void          *payload_virt;
 	dma_addr_t    payload_phys;
 	void          *auxiliary_virt;
@@ -1018,6 +1025,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	unsigned char *status;
 	unsigned int  max_bitflips = 0;
 	int           ret;
+	int flag = 0;
 
 	dev_dbg(this->dev, "page number is : %d\n", page);
 	ret = read_page_prepare(this, buf, nfc_geo->payload_size,
@@ -1050,9 +1058,16 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
 
 	for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
-		if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
+		if (*status == STATUS_GOOD)
 			continue;
 
+		if (*status == STATUS_ERASED) {
+			if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))
+				if (readl(bch_regs + HW_BCH_DEBUG1))
+					flag = 1;
+			continue;
+		}
+
 		if (*status == STATUS_UNCORRECTABLE) {
 			mtd->ecc_stats.failed++;
 			continue;
@@ -1081,6 +1096,10 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 			nfc_geo->payload_size,
 			payload_virt, payload_phys);
 
+	/* if bitflip occurred in erased page, change data to all 0xff */
+	if (flag)
+		memset(buf, 0xff, nfc_geo->payload_size);
+
 	return max_bitflips;
 }
 
@@ -1988,6 +2007,9 @@ static const struct of_device_id gpmi_nand_id_table[] = {
 		.compatible = "fsl,imx6q-gpmi-nand",
 		.data = &gpmi_devdata_imx6q,
 	}, {
+		.compatible = "fsl,imx6qp-gpmi-nand",
+		.data = (void *)&gpmi_devdata_imx6qp,
+	}, {
 		.compatible = "fsl,imx6sx-gpmi-nand",
 		.data = &gpmi_devdata_imx6sx,
 	}, {
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index a82555f..605d96e 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -123,6 +123,7 @@ enum gpmi_type {
 	IS_MX23,
 	IS_MX28,
 	IS_MX6Q,
+	IS_MX6QP,
 	IS_MX6SX,
 	IS_MX7D,
 };
@@ -305,9 +306,11 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
 #define GPMI_IS_MX23(x)		((x)->devdata->type == IS_MX23)
 #define GPMI_IS_MX28(x)		((x)->devdata->type == IS_MX28)
 #define GPMI_IS_MX6Q(x)		((x)->devdata->type == IS_MX6Q)
+#define GPMI_IS_MX6QP(x)	((x)->devdata->type == IS_MX6QP)
 #define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
 #define GPMI_IS_MX7D(x)		((x)->devdata->type == IS_MX7D)
 
-#define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
+#define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6QP(x)\
+	   || GPMI_IS_MX6SX(x))
 #define GPMI_IS_MX7(x)		(GPMI_IS_MX7D(x))
 #endif
-- 
1.9.1

Re: [PATCH 3/5] mtd: nand: gpmi: correct bitflip for erased NAND page

[Boris Brezillon]

Hi Han,

On Tue, 23 Feb 2016 17:04:51 -0600
Han Xu <han.xu@nxp.com> wrote:

> i.MX6QP and i.MX7D BCH module integrated a new feature to detect the
> bitflip number for erased NAND page. So for these two platform, set the
> erase threshold to ecc_strength and if bitflip detected, GPMI driver will
> correct the data to all 0xFF.

You're 2 different things in this patch:
1/ adding support for mx6qp
2/ handling bitflips in erased pages with the bitflip count feature

This should be split in 2 different patches.

> 
> Signed-off-by: Han Xu <han.xu@nxp.com>
> ---
>  drivers/mtd/nand/gpmi-nand/bch-regs.h  | 10 ++++++++++
>  drivers/mtd/nand/gpmi-nand/gpmi-lib.c  |  5 +++++
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 24 +++++++++++++++++++++++-
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.h |  5 ++++-
>  4 files changed, 42 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> index 53e58bc..a84d72b 100644
> --- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
> +++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> @@ -30,7 +30,13 @@
>  #define BM_BCH_CTRL_COMPLETE_IRQ		(1 << 0)
>  
>  #define HW_BCH_STATUS0				0x00000010
> +
>  #define HW_BCH_MODE				0x00000020
> +#define BP_BCH_MODE_ERASE_THRESHOLD		0
> +#define BM_BCH_MODE_ERASE_THRESHOLD	(0xff << BP_BCH_MODE_ERASE_THRESHOLD)
> +#define BF_BCH_MODE_ERASE_THRESHOLD(v)		\
> +	(((v) << BP_BCH_MODE_ERASE_THRESHOLD) & BM_BCH_MODE_ERASE_THRESHOLD)
> +
>  #define HW_BCH_ENCODEPTR			0x00000030
>  #define HW_BCH_DATAPTR				0x00000040
>  #define HW_BCH_METAPTR				0x00000050
> @@ -125,4 +131,8 @@
>  	)
>  
>  #define HW_BCH_VERSION				0x00000160
> +#define HW_BCH_DEBUG1				0x00000170
> +#define BP_BCH_DEBUG1_ERASED_ZERO_COUNT	0
> +#define BM_BCH_DEBUG1_ERASED_ZERO_COUNT		\
> +		(0x1ff << BP_BCH_DEBUG1_ERASED_ZERO_COUNT)
>  #endif
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> index 8acbe04..2c43213 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> @@ -298,6 +298,11 @@ int bch_set_geometry(struct gpmi_nand_data *this)
>  			| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
>  			r->bch_regs + HW_BCH_FLASH0LAYOUT1);
>  
> +	/* Set erase threshold to ecc_strength for mx6qp and mx7 */
> +	if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))
> +		writel(BF_BCH_MODE_ERASE_THRESHOLD(ecc_strength),
> +			r->bch_regs + HW_BCH_MODE);
> +
>  	/* Set *all* chip selects to use layout 0. */
>  	writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
>  
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 1aba6e6..6b3ca3b 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -71,6 +71,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6q = {
>  	.max_chain_delay = 12,
>  };
>  
> +static const struct gpmi_devdata gpmi_devdata_imx6qp = {
> +	.type = IS_MX6QP,
> +	.bch_max_ecc_strength = 40,
> +	.max_chain_delay = 12,
> +};
> +
>  static const struct gpmi_devdata gpmi_devdata_imx6sx = {
>  	.type = IS_MX6SX,
>  	.bch_max_ecc_strength = 62,
> @@ -1010,6 +1016,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
>  {
>  	struct gpmi_nand_data *this = nand_get_controller_data(chip);
>  	struct bch_geometry *nfc_geo = &this->bch_geometry;
> +	void __iomem *bch_regs = this->resources.bch_regs;
>  	void          *payload_virt;
>  	dma_addr_t    payload_phys;
>  	void          *auxiliary_virt;
> @@ -1018,6 +1025,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
>  	unsigned char *status;
>  	unsigned int  max_bitflips = 0;
>  	int           ret;
> +	int flag = 0;
>  
>  	dev_dbg(this->dev, "page number is : %d\n", page);
>  	ret = read_page_prepare(this, buf, nfc_geo->payload_size,
> @@ -1050,9 +1058,16 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
>  	status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
>  
>  	for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
> -		if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
> +		if (*status == STATUS_GOOD)
>  			continue;
>  
> +		if (*status == STATUS_ERASED) {
> +			if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))
> +				if (readl(bch_regs + HW_BCH_DEBUG1))
> +					flag = 1;

You should update max_bitflips here.

> +			continue;
> +		}
> +
>  		if (*status == STATUS_UNCORRECTABLE) {
>  			mtd->ecc_stats.failed++;
>  			continue;
> @@ -1081,6 +1096,10 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
>  			nfc_geo->payload_size,
>  			payload_virt, payload_phys);
>  
> +	/* if bitflip occurred in erased page, change data to all 0xff */
> +	if (flag)
> +		memset(buf, 0xff, nfc_geo->payload_size);

I guess your controller does not support subpage writes, but it would
be safer to set the ECC chunk buf to 0xff in the
if (*status == STATUS_ERASED) condition. And you should also set the
->oob_poi buffer to 0xff.

> +
>  	return max_bitflips;
>  }
>  
> @@ -1988,6 +2007,9 @@ static const struct of_device_id gpmi_nand_id_table[] = {
>  		.compatible = "fsl,imx6q-gpmi-nand",
>  		.data = &gpmi_devdata_imx6q,
>  	}, {
> +		.compatible = "fsl,imx6qp-gpmi-nand",
> +		.data = (void *)&gpmi_devdata_imx6qp,

You don't need this (void *) cast.

> +	}, {
>  		.compatible = "fsl,imx6sx-gpmi-nand",
>  		.data = &gpmi_devdata_imx6sx,
>  	}, {
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> index a82555f..605d96e 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> @@ -123,6 +123,7 @@ enum gpmi_type {
>  	IS_MX23,
>  	IS_MX28,
>  	IS_MX6Q,
> +	IS_MX6QP,
>  	IS_MX6SX,
>  	IS_MX7D,
>  };
> @@ -305,9 +306,11 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
>  #define GPMI_IS_MX23(x)		((x)->devdata->type == IS_MX23)
>  #define GPMI_IS_MX28(x)		((x)->devdata->type == IS_MX28)
>  #define GPMI_IS_MX6Q(x)		((x)->devdata->type == IS_MX6Q)
> +#define GPMI_IS_MX6QP(x)	((x)->devdata->type == IS_MX6QP)
>  #define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
>  #define GPMI_IS_MX7D(x)		((x)->devdata->type == IS_MX7D)
>  
> -#define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
> +#define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6QP(x)\

Missing space at the end of the line => "GPMI_IS_MX6QP(x) \"

> +	   || GPMI_IS_MX6SX(x))

And can you align this on the opening parenthesis?

Best Regards,

Boris

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH 4/5] mtd: nand: gpmi: support NAND on i.MX6UL

[Han Xu]

From: Han Xu <b45815@freescale.com>

support GPMI NAND on i.MX6UL

Signed-off-by: Han Xu <han.xu@freescale.com>
---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 9 +++++++++
 drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 4 +++-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 6b3ca3b..1987f03 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -89,6 +89,12 @@ static const struct gpmi_devdata gpmi_devdata_imx7d = {
 	.max_chain_delay = 12,
 };
 
+static const struct gpmi_devdata gpmi_devdata_imx6ul = {
+	.type = IS_MX6UL,
+	.bch_max_ecc_strength = 40,
+	.max_chain_delay = 12,
+};
+
 static irqreturn_t bch_irq(int irq, void *cookie)
 {
 	struct gpmi_nand_data *this = cookie;
@@ -2013,6 +2019,9 @@ static const struct of_device_id gpmi_nand_id_table[] = {
 		.compatible = "fsl,imx6sx-gpmi-nand",
 		.data = &gpmi_devdata_imx6sx,
 	}, {
+		.compatible = "fsl,imx6ul-gpmi-nand",
+		.data = (void *)&gpmi_devdata_imx6ul,
+	}, {
 		.compatible = "fsl,imx7d-gpmi-nand",
 		.data = (void *)&gpmi_devdata_imx7d,
 	}, { /* sentinel */ }
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 605d96e..eb45a3c 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -126,6 +126,7 @@ enum gpmi_type {
 	IS_MX6QP,
 	IS_MX6SX,
 	IS_MX7D,
+	IS_MX6UL,
 };
 
 struct gpmi_devdata {
@@ -309,8 +310,9 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
 #define GPMI_IS_MX6QP(x)	((x)->devdata->type == IS_MX6QP)
 #define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
 #define GPMI_IS_MX7D(x)		((x)->devdata->type == IS_MX7D)
+#define GPMI_IS_MX6UL(x)	((x)->devdata->type == IS_MX6UL)
 
 #define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6QP(x)\
-	   || GPMI_IS_MX6SX(x))
+	   || GPMI_IS_MX6SX(x) || GPMI_IS_MX6UL(x))
 #define GPMI_IS_MX7(x)		(GPMI_IS_MX7D(x))
 #endif
-- 
1.9.1

Re: [PATCH 4/5] mtd: nand: gpmi: support NAND on i.MX6UL

[Boris Brezillon]

On Tue, 23 Feb 2016 17:04:52 -0600
Han Xu <han.xu@nxp.com> wrote:

> From: Han Xu <b45815@freescale.com>
> 
> support GPMI NAND on i.MX6UL
> 
> Signed-off-by: Han Xu <han.xu@freescale.com>
> ---
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 9 +++++++++
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 4 +++-
>  2 files changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 6b3ca3b..1987f03 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -89,6 +89,12 @@ static const struct gpmi_devdata gpmi_devdata_imx7d = {
>  	.max_chain_delay = 12,
>  };
>  
> +static const struct gpmi_devdata gpmi_devdata_imx6ul = {
> +	.type = IS_MX6UL,
> +	.bch_max_ecc_strength = 40,
> +	.max_chain_delay = 12,
> +};
> +
>  static irqreturn_t bch_irq(int irq, void *cookie)
>  {
>  	struct gpmi_nand_data *this = cookie;
> @@ -2013,6 +2019,9 @@ static const struct of_device_id gpmi_nand_id_table[] = {
>  		.compatible = "fsl,imx6sx-gpmi-nand",
>  		.data = &gpmi_devdata_imx6sx,
>  	}, {
> +		.compatible = "fsl,imx6ul-gpmi-nand",
> +		.data = (void *)&gpmi_devdata_imx6ul,

Drop this (void *) cast.

> +	}, {
>  		.compatible = "fsl,imx7d-gpmi-nand",
>  		.data = (void *)&gpmi_devdata_imx7d,
>  	}, { /* sentinel */ }
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> index 605d96e..eb45a3c 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> @@ -126,6 +126,7 @@ enum gpmi_type {
>  	IS_MX6QP,
>  	IS_MX6SX,
>  	IS_MX7D,
> +	IS_MX6UL,
>  };
>  
>  struct gpmi_devdata {
> @@ -309,8 +310,9 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
>  #define GPMI_IS_MX6QP(x)	((x)->devdata->type == IS_MX6QP)
>  #define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
>  #define GPMI_IS_MX7D(x)		((x)->devdata->type == IS_MX7D)
> +#define GPMI_IS_MX6UL(x)	((x)->devdata->type == IS_MX6UL)
>  
>  #define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6QP(x)\
> -	   || GPMI_IS_MX6SX(x))
> +	   || GPMI_IS_MX6SX(x) || GPMI_IS_MX6UL(x))

And fix the missing space and alignment issue here as well.

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH 5/5] mtd: nand: gpmi: document the new supported chip in DT

[Han Xu]

listed all supported chips in DT.

Signed-off-by: Han Xu <han.xu@nxp.com>
---
 Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index c8d0e2f..ed48f69 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -4,7 +4,8 @@ The GPMI nand controller provides an interface to control the
 NAND flash chips.
 
 Required properties:
-  - compatible : should be "fsl,<chip>-gpmi-nand"
+  - compatible : should be "fsl,<chip>-gpmi-nand", the chip should be imx23,
+    imx28, imx6q, imx6qp, imx6sx, imx6ul or imx7d.
   - reg : should contain registers location and length for gpmi and bch.
   - reg-names: Should contain the reg names "gpmi-nand" and "bch"
   - interrupts : BCH interrupt number.
-- 
1.9.1