[PATCH v3 00/14] Clock improvement for video playback

[PATCH v3 00/14] Clock improvement for video playback

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

v3:
  - Rebase to v4.8-rc1
  - Tipo fix in st,clkgen-pll.txt
  - Add Ack of Peter for the series
  - Add missed patch: "ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms"

v2:
  - Simpliflication of clock binding
    remark from Rob https://lkml.org/lkml/2016/5/25/492
  - Suppression of stih415-416 support for the clocks (in order
	to help simplification of clock binding)
    (others patchs for the machine and drivers will come)

This serie allows to increase video resolutions and make audio
adjustment during a video playback.

Gabriel Fernandez (14):
  drivers: clk: st: Remove stih415-416 clock support
  drivers: clk: st: Simplify clock binding of STiH4xx platforms
  ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms
  drivers: clk: st: Add fs660c32 synthesizer algorithm
  drivers: clk: st: Add clock propagation for audio clocks
  drivers: clk: st: Handle clk synchronous mode for video clocks
  ARM: DT: STiH407: Enable clock propagation for audio clocks
  ARM: DT: STiH410: Enable clock propagation for audio clocks
  ARM: DT: STiH418: Enable clock propagation for audio clocks
  ARM: DT: STiH407: Enable synchronous clock mode for video clocks
  ARM: DT: STiH410: Enable synchronous clock mode for video clocks
  ARM: DT: STiH418: Enable synchronous clock mode for video clocks
  ARM: DT: STi: STiH407: clock configuration to address 720p and 1080p
  ARM: DT: STi: STiH410: clock configuration to address 720p and 1080p

 .../bindings/clock/st/st,clkgen-divmux.txt         |  49 --
 .../devicetree/bindings/clock/st/st,clkgen-mux.txt |  20 +-
 .../devicetree/bindings/clock/st/st,clkgen-pll.txt |  35 +-
 .../bindings/clock/st/st,clkgen-prediv.txt         |  36 -
 .../devicetree/bindings/clock/st/st,clkgen-vcc.txt |  61 --
 .../devicetree/bindings/clock/st/st,clkgen.txt     |  54 +-
 .../devicetree/bindings/clock/st/st,flexgen.txt    |   4 +
 .../devicetree/bindings/clock/st/st,quadfs.txt     |  31 +-
 arch/arm/boot/dts/stih407-clock.dtsi               |  22 +-
 arch/arm/boot/dts/stih407.dtsi                     |  16 +-
 arch/arm/boot/dts/stih410-clock.dtsi               |  20 +-
 arch/arm/boot/dts/stih410.dtsi                     |  16 +-
 arch/arm/boot/dts/stih418-clock.dtsi               |  20 +-
 drivers/clk/st/clk-flexgen.c                       |  63 +-
 drivers/clk/st/clkgen-fsyn.c                       | 481 ++++---------
 drivers/clk/st/clkgen-mux.c                        | 748 +--------------------
 drivers/clk/st/clkgen-pll.c                        | 472 +------------
 17 files changed, 323 insertions(+), 1825 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt

-- 
1.9.1

[PATCH v3 01/14] drivers: clk: st: Remove stih415-416 clock support

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

STiH415 and STiH416 platforms are no longer used.
these platforms will be deprecated for the next kernel.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 .../bindings/clock/st/st,clkgen-divmux.txt         |  49 --
 .../devicetree/bindings/clock/st/st,clkgen-mux.txt |  18 +-
 .../devicetree/bindings/clock/st/st,clkgen-pll.txt |  26 +-
 .../bindings/clock/st/st,clkgen-prediv.txt         |  36 -
 .../devicetree/bindings/clock/st/st,clkgen-vcc.txt |  61 --
 .../devicetree/bindings/clock/st/st,clkgen.txt     |  54 +-
 .../devicetree/bindings/clock/st/st,quadfs.txt     |  27 +-
 drivers/clk/st/clkgen-fsyn.c                       | 260 --------
 drivers/clk/st/clkgen-mux.c                        | 726 +--------------------
 drivers/clk/st/clkgen-pll.c                        | 419 ------------
 10 files changed, 37 insertions(+), 1639 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
deleted file mode 100644
index 6247652..0000000
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Binding for a ST divider and multiplexer clock driver.
-
-This binding uses the common clock binding[1].
-Base address is located to the parent node. See clock binding[2]
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
-
-Required properties:
-
-- compatible : shall be:
-	"st,clkgena-divmux-c65-hs",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c65-ls",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf0",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf1",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf2",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf3",	"st,clkgena-divmux"
-
-- #clock-cells : From common clock binding; shall be set to 1.
-
-- clocks : From common clock binding
-
-- clock-output-names : From common clock binding.
-
-Example:
-
-	clockgen-a@fd345000 {
-		reg = <0xfd345000 0xb50>;
-
-		clk_m_a1_div1: clk-m-a1-div1 {
-			#clock-cells = <1>;
-			compatible = "st,clkgena-divmux-c32-odf1",
-				     "st,clkgena-divmux";
-
-			clocks = <&clk_m_a1_osc_prediv>,
-				 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
-				 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
-
-			clock-output-names = "clk-m-rx-icn-ts",
-					     "clk-m-rx-icn-vdp-0",
-					     "", /* unused */
-					     "clk-m-prv-t1-bus",
-					     "clk-m-icn-reg-12",
-					     "clk-m-icn-reg-10",
-					     "", /* unused */
-					     "clk-m-icn-st231";
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
index f1fa91c..4d277d6 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -10,13 +10,6 @@ This binding uses the common clock binding[1].
 Required properties:
 
 - compatible : shall be:
-	"st,stih416-clkgenc-vcc-hd",	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-fvdp",	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-hva", 	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-hd",	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-sd",	"st,clkgen-mux"
-	"st,stih415-clkgen-a9-mux",	"st,clkgen-mux"
-	"st,stih416-clkgen-a9-mux",	"st,clkgen-mux"
 	"st,stih407-clkgen-a9-mux",	"st,clkgen-mux"
 
 - #clock-cells : from common clock binding; shall be set to 0.
@@ -27,10 +20,13 @@ Required properties:
 
 Example:
 
-	clk_m_hva: clk-m-hva@fd690868 {
+	clk_m_a9: clk-m-a9@92b0000 {
 		#clock-cells = <0>;
-		compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
-		reg = <0xfd690868 4>;
+		compatible = "st,stih407-clkgen-a9-mux";
+		reg = <0x92b0000 0x10000>;
 
-		clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>;
+		clocks = <&clockgen_a9_pll 0>,
+			 <&clockgen_a9_pll 0>,
+			 <&clk_s_c0_flexgen 13>,
+			 <&clk_m_a9_ext2f_div2>;
 	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index 844b3a0..c9fd674 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -9,25 +9,12 @@ Base address is located to the parent node. See clock binding[2]
 Required properties:
 
 - compatible : shall be:
-	"st,clkgena-prediv-c65",	"st,clkgena-prediv"
-	"st,clkgena-prediv-c32",	"st,clkgena-prediv"
-
-	"st,clkgena-plls-c65"
-	"st,plls-c32-a1x-0",		"st,clkgen-plls-c32"
-	"st,plls-c32-a1x-1",		"st,clkgen-plls-c32"
-	"st,stih415-plls-c32-a9",	"st,clkgen-plls-c32"
-	"st,stih415-plls-c32-ddr",	"st,clkgen-plls-c32"
-	"st,stih416-plls-c32-a9",	"st,clkgen-plls-c32"
-	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
 	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
 	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
 	"sst,plls-c32-cx_0",		"st,clkgen-plls-c32"
 	"sst,plls-c32-cx_1",		"st,clkgen-plls-c32"
 	"st,stih418-plls-c28-a9",	"st,clkgen-plls-c32"
 
-	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
-	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
-
 - #clock-cells : From common clock binding; shall be set to 1.
 
 - clocks : From common clock binding
@@ -36,17 +23,16 @@ Required properties:
 
 Example:
 
-	clockgen-a@fee62000 {
-		reg = <0xfee62000 0xb48>;
+	clockgen-a9@92b0000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x92b0000 0xffff>;
 
-		clk_s_a0_pll: clk-s-a0-pll {
+		clockgen_a9_pll: clockgen-a9-pll {
 			#clock-cells = <1>;
-			compatible = "st,clkgena-plls-c65";
+			compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
 
 			clocks = <&clk_sysin>;
 
-			clock-output-names = "clk-s-a0-pll0-hs",
-					     "clk-s-a0-pll0-ls",
-					     "clk-s-a0-pll1";
+			clock-output-names = "clockgen-a9-pll-odf";
 		};
 	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
deleted file mode 100644
index 604766c..0000000
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Binding for a ST pre-divider clock driver.
-
-This binding uses the common clock binding[1].
-Base address is located to the parent node. See clock binding[2]
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
-
-Required properties:
-
-- compatible : shall be:
-	"st,clkgena-prediv-c65",	"st,clkgena-prediv"
-	"st,clkgena-prediv-c32",	"st,clkgena-prediv"
-
-- #clock-cells : From common clock binding; shall be set to 0.
-
-- clocks : From common clock binding
-
-- clock-output-names : From common clock binding.
-
-Example:
-
-	clockgen-a@fd345000 {
-		reg = <0xfd345000 0xb50>;
-
-		clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
-			#clock-cells = <0>;
-			compatible = "st,clkgena-prediv-c32",
-				     "st,clkgena-prediv";
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-m-a2-osc-prediv";
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
deleted file mode 100644
index 109b3ed..0000000
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Binding for a type of STMicroelectronics clock crossbar (VCC).
-
-The crossbar can take up to 4 input clocks and control up to 16
-output clocks. Not all inputs or outputs have to be in use in a
-particular instantiation. Each output can be individually enabled,
-select any of the input clocks and apply a divide (by 1,2,4 or 8) to
-that selected clock.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-
-- compatible : shall be:
-	"st,stih416-clkgenc",		"st,vcc"
-	"st,stih416-clkgenf",		"st,vcc"
-
-- #clock-cells : from common clock binding; shall be set to 1.
-
-- reg : A Base address and length of the register set.
-
-- clocks : from common clock binding
-
-- clock-output-names : From common clock binding. The block has 16
-                       clock outputs but not all of them in a specific instance
-                       have to be used in the SoC. If a clock name is left as
-                       an empty string then no clock will be created for the
-                       output associated with that string index. If fewer than
-                       16 strings are provided then no clocks will be created
-                       for the remaining outputs.
-
-Example:
-
-	clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac {
-		#clock-cells = <1>;
-		compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
-		reg = <0xfe8308ac 12>;
-
-		clocks = <&clk_s_vcc_hd>,
-			 <&clockgen_c 1>,
-			 <&clk_s_tmds_fromphy>,
-			 <&clockgen_c 2>;
-
-		clock-output-names  = "clk-s-pix-hdmi",
-				      "clk-s-pix-dvo",
-				      "clk-s-out-dvo",
-				      "clk-s-pix-hd",
-				      "clk-s-hddac",
-				      "clk-s-denc",
-				      "clk-s-sddac",
-				      "clk-s-pix-main",
-				      "clk-s-pix-aux",
-				      "clk-s-stfe-frc-0",
-				      "clk-s-ref-mcru",
-				      "clk-s-slave-mcru",
-				      "clk-s-tmds-hdmi",
-				      "clk-s-hdmi-reject-pll",
-				      "clk-s-thsens";
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index b18bf86..c764d6b 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -13,14 +13,6 @@ address is common of all subnode.
 			...
 		};
 
-		prediv_node {
-			...
-		};
-
-		divmux_node {
-			...
-		};
-
 		quadfs_node {
 			...
 		};
@@ -29,10 +21,6 @@ address is common of all subnode.
 			...
 		};
 
-		vcc_node {
-			...
-		};
-
 		flexgen_node {
 			...
 		};
@@ -43,11 +31,8 @@ This binding uses the common clock binding[1].
 Each subnode should use the binding described in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
 [3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
 [4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
-[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
-[6] Documentation/devicetree/bindings/clock/st,vcc.txt
 [7] Documentation/devicetree/bindings/clock/st,quadfs.txt
 [8] Documentation/devicetree/bindings/clock/st,flexgen.txt
 
@@ -57,44 +42,27 @@ Required properties:
 
 Example:
 
-	clockgen-a@fee62000 {
-
-		reg = <0xfee62000 0xb48>;
+	clockgen-a@090ff000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x90ff000 0x1000>;
 
 		clk_s_a0_pll: clk-s-a0-pll {
 			#clock-cells = <1>;
-			compatible = "st,clkgena-plls-c65";
-
-			clocks = <&clk-sysin>;
-
-			clock-output-names = "clk-s-a0-pll0-hs",
-					     "clk-s-a0-pll0-ls",
-					     "clk-s-a0-pll1";
-		};
-
-		clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
-			#clock-cells = <0>;
-			compatible = "st,clkgena-prediv-c65",
-				     "st,clkgena-prediv";
+			compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
 
 			clocks = <&clk_sysin>;
 
-			clock-output-names = "clk-s-a0-osc-prediv";
+			clock-output-names = "clk-s-a0-pll-ofd-0";
 		};
 
-		clk_s_a0_hs: clk-s-a0-hs {
+		clk_s_a0_flexgen: clk-s-a0-flexgen {
+			compatible = "st,flexgen";
+
 			#clock-cells = <1>;
-			compatible = "st,clkgena-divmux-c65-hs",
-				     "st,clkgena-divmux";
 
-			clocks = <&clk-s_a0_osc_prediv>,
-				 <&clk-s_a0_pll 0>, /* pll0 hs */
-				 <&clk-s_a0_pll 2>; /* pll1 */
+			clocks = <&clk_s_a0_pll 0>,
+				 <&clk_sysin>;
 
-			clock-output-names = "clk-s-fdma-0",
-					     "clk-s-fdma-1",
-					     ""; /* clk-s-jit-sense */
-					     /* fourth output unused */
+			clock-output-names = "clk-ic-lmi0";
 		};
 	};
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
index cedeb9c..6d81b11 100644
--- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -11,10 +11,6 @@ This binding uses the common clock binding[1].
 
 Required properties:
 - compatible : shall be:
-  "st,stih416-quadfs216",	"st,quadfs"
-  "st,stih416-quadfs432",	"st,quadfs"
-  "st,stih416-quadfs660-E",	"st,quadfs"
-  "st,stih416-quadfs660-F",	"st,quadfs"
   "st,stih407-quadfs660-C",	"st,quadfs"
   "st,stih407-quadfs660-D",	"st,quadfs"
 
@@ -35,14 +31,15 @@ Required properties:
 
 Example:
 
-	clockgen_e: clockgen-e@fd3208bc {
-                #clock-cells = <1>;
-                compatible = "st,stih416-quadfs660-E", "st,quadfs";
-                reg = <0xfd3208bc 0xB0>;
-
-                clocks = <&clk_sysin>;
-                clock-output-names = "clk-m-pix-mdtp-0",
-				     "clk-m-pix-mdtp-1",
-				     "clk-m-pix-mdtp-2",
-				     "clk-m-mpelpc";
-        };
+	clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+		#clock-cells = <1>;
+		compatible = "st,stih407-quadfs660-C", "st,quadfs";
+		reg = <0x9103000 0x1000>;
+
+		clocks = <&clk_sysin>;
+
+		clock-output-names = "clk-s-c0-fs0-ch0",
+				     "clk-s-c0-fs0-ch1",
+				     "clk-s-c0-fs0-ch2",
+				     "clk-s-c0-fs0-ch3";
+	};
diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 09afeb8..942c187 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -42,45 +42,6 @@ struct stm_fs {
 	unsigned long nsdiv;
 };
 
-static const struct stm_fs fs216c65_rtbl[] = {
-	{ .mdiv = 0x1f, .pe = 0x0,	.sdiv = 0x7,	.nsdiv = 0 },	/* 312.5 Khz */
-	{ .mdiv = 0x17, .pe = 0x25ed,	.sdiv = 0x1,	.nsdiv = 0 },	/* 27    MHz */
-	{ .mdiv = 0x1a, .pe = 0x7b36,	.sdiv = 0x2,	.nsdiv = 1 },	/* 36.87 MHz */
-	{ .mdiv = 0x13, .pe = 0x0,	.sdiv = 0x2,	.nsdiv = 1 },	/* 48    MHz */
-	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x1,	.nsdiv = 1 },	/* 108   MHz */
-};
-
-static const struct stm_fs fs432c65_rtbl[] = {
-	{ .mdiv = 0x1f, .pe = 0x0,	.sdiv = 0x7,	.nsdiv = 0 },	/* 625     Khz */
-	{ .mdiv = 0x13, .pe = 0x777c,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.175  MHz */
-	{ .mdiv = 0x19, .pe = 0x4d35,	.sdiv = 0x2,	.nsdiv = 0 },	/* 25.200  MHz */
-	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x4,	.nsdiv = 1 },	/* 27.000  MHz */
-	{ .mdiv = 0x17, .pe = 0x28f5,	.sdiv = 0x2,	.nsdiv = 0 },	/* 27.027  MHz */
-	{ .mdiv = 0x16, .pe = 0x3359,	.sdiv = 0x2,	.nsdiv = 0 },	/* 28.320  MHz */
-	{ .mdiv = 0x1f, .pe = 0x2083,	.sdiv = 0x3,	.nsdiv = 1 },	/* 30.240  MHz */
-	{ .mdiv = 0x1e, .pe = 0x430d,	.sdiv = 0x3,	.nsdiv = 1 },	/* 31.500  MHz */
-	{ .mdiv = 0x17, .pe = 0x0,	.sdiv = 0x3,	.nsdiv = 1 },	/* 40.000  MHz */
-	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x1,	.nsdiv = 0 },	/* 49.500  MHz */
-	{ .mdiv = 0x13, .pe = 0x6667,	.sdiv = 0x3,	.nsdiv = 1 },	/* 50.000  MHz */
-	{ .mdiv = 0x10, .pe = 0x1ee6,	.sdiv = 0x3,	.nsdiv = 1 },	/* 57.284  MHz */
-	{ .mdiv = 0x1d, .pe = 0x3b14,	.sdiv = 0x2,	.nsdiv = 1 },	/* 65.000  MHz */
-	{ .mdiv = 0x12, .pe = 0x7c65,	.sdiv = 0x1,	.nsdiv = 0 },	/* 71.000  MHz */
-	{ .mdiv = 0x19, .pe = 0xecd,	.sdiv = 0x2,	.nsdiv = 1 },	/* 74.176  MHz */
-	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x2,	.nsdiv = 1 },	/* 74.250  MHz */
-	{ .mdiv = 0x19, .pe = 0x3334,	.sdiv = 0x2,	.nsdiv = 1 },	/* 75.000  MHz */
-	{ .mdiv = 0x18, .pe = 0x5138,	.sdiv = 0x2,	.nsdiv = 1 },	/* 78.800  MHz */
-	{ .mdiv = 0x1d, .pe = 0x77d,	.sdiv = 0x0,	.nsdiv = 0 },	/* 85.500  MHz */
-	{ .mdiv = 0x1c, .pe = 0x13d5,	.sdiv = 0x0,	.nsdiv = 0 },	/* 88.750  MHz */
-	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108.000 MHz */
-	{ .mdiv = 0x17, .pe = 0x28f5,	.sdiv = 0x0,	.nsdiv = 0 },	/* 108.108 MHz */
-	{ .mdiv = 0x10, .pe = 0x6e26,	.sdiv = 0x2,	.nsdiv = 1 },	/* 118.963 MHz */
-	{ .mdiv = 0x15, .pe = 0x3e63,	.sdiv = 0x0,	.nsdiv = 0 },	/* 119.000 MHz */
-	{ .mdiv = 0x1c, .pe = 0x471d,	.sdiv = 0x1,	.nsdiv = 1 },	/* 135.000 MHz */
-	{ .mdiv = 0x19, .pe = 0xecd,	.sdiv = 0x1,	.nsdiv = 1 },	/* 148.352 MHz */
-	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x1,	.nsdiv = 1 },	/* 148.500 MHz */
-	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297     MHz */
-};
-
 static const struct stm_fs fs660c32_rtbl[] = {
 	{ .mdiv = 0x14, .pe = 0x376b,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.175  MHz */
 	{ .mdiv = 0x14, .pe = 0x30c3,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.200  MHz */
@@ -144,168 +105,11 @@ struct clkgen_quadfs_data {
 			unsigned long *);
 };
 
-static const struct clk_ops st_quadfs_pll_c65_ops;
 static const struct clk_ops st_quadfs_pll_c32_ops;
-static const struct clk_ops st_quadfs_fs216c65_ops;
-static const struct clk_ops st_quadfs_fs432c65_ops;
 static const struct clk_ops st_quadfs_fs660c32_ops;
 
-static int clk_fs216c65_get_rate(unsigned long, const struct stm_fs *,
-		unsigned long *);
-static int clk_fs432c65_get_rate(unsigned long, const struct stm_fs *,
-		unsigned long *);
 static int clk_fs660c32_dig_get_rate(unsigned long, const struct stm_fs *,
 		unsigned long *);
-/*
- * Values for all of the standalone instances of this clock
- * generator found in STiH415 and STiH416 SYSCFG register banks. Note
- * that the individual channel standby control bits (nsb) are in the
- * first register along with the PLL control bits.
- */
-static const struct clkgen_quadfs_data st_fs216c65_416 = {
-	/* 416 specific */
-	.npda	= CLKGEN_FIELD(0x0, 0x1, 14),
-	.nsb	= { CLKGEN_FIELD(0x0, 0x1, 10),
-		    CLKGEN_FIELD(0x0, 0x1, 11),
-		    CLKGEN_FIELD(0x0, 0x1, 12),
-		    CLKGEN_FIELD(0x0, 0x1, 13) },
-	.nsdiv_present = true,
-	.nsdiv	= { CLKGEN_FIELD(0x0, 0x1, 18),
-		    CLKGEN_FIELD(0x0, 0x1, 19),
-		    CLKGEN_FIELD(0x0, 0x1, 20),
-		    CLKGEN_FIELD(0x0, 0x1, 21) },
-	.mdiv	= { CLKGEN_FIELD(0x4, 0x1f, 0),
-		    CLKGEN_FIELD(0x14, 0x1f, 0),
-		    CLKGEN_FIELD(0x24, 0x1f, 0),
-		    CLKGEN_FIELD(0x34, 0x1f, 0) },
-	.en	= { CLKGEN_FIELD(0x10, 0x1, 0),
-		    CLKGEN_FIELD(0x20, 0x1, 0),
-		    CLKGEN_FIELD(0x30, 0x1, 0),
-		    CLKGEN_FIELD(0x40, 0x1, 0) },
-	.ndiv	= CLKGEN_FIELD(0x0, 0x1, 15),
-	.bwfilter_present = true,
-	.ref_bw = CLKGEN_FIELD(0x0, 0x3, 16),
-	.pe	= { CLKGEN_FIELD(0x8, 0xffff, 0),
-		    CLKGEN_FIELD(0x18, 0xffff, 0),
-		    CLKGEN_FIELD(0x28, 0xffff, 0),
-		    CLKGEN_FIELD(0x38, 0xffff, 0) },
-	.sdiv	= { CLKGEN_FIELD(0xC, 0x7, 0),
-		    CLKGEN_FIELD(0x1C, 0x7, 0),
-		    CLKGEN_FIELD(0x2C, 0x7, 0),
-		    CLKGEN_FIELD(0x3C, 0x7, 0) },
-	.pll_ops	= &st_quadfs_pll_c65_ops,
-	.rtbl		= fs216c65_rtbl,
-	.rtbl_cnt	= ARRAY_SIZE(fs216c65_rtbl),
-	.get_rate	= clk_fs216c65_get_rate,
-};
-
-static const struct clkgen_quadfs_data st_fs432c65_416 = {
-	.npda	= CLKGEN_FIELD(0x0, 0x1, 14),
-	.nsb	= { CLKGEN_FIELD(0x0, 0x1, 10),
-		    CLKGEN_FIELD(0x0, 0x1, 11),
-		    CLKGEN_FIELD(0x0, 0x1, 12),
-		    CLKGEN_FIELD(0x0, 0x1, 13) },
-	.nsdiv_present = true,
-	.nsdiv	= { CLKGEN_FIELD(0x0, 0x1, 18),
-		   CLKGEN_FIELD(0x0, 0x1, 19),
-		   CLKGEN_FIELD(0x0, 0x1, 20),
-		   CLKGEN_FIELD(0x0, 0x1, 21) },
-	.mdiv	= { CLKGEN_FIELD(0x4, 0x1f, 0),
-		    CLKGEN_FIELD(0x14, 0x1f, 0),
-		    CLKGEN_FIELD(0x24, 0x1f, 0),
-		    CLKGEN_FIELD(0x34, 0x1f, 0) },
-	.en	= { CLKGEN_FIELD(0x10, 0x1, 0),
-		    CLKGEN_FIELD(0x20, 0x1, 0),
-		    CLKGEN_FIELD(0x30, 0x1, 0),
-		    CLKGEN_FIELD(0x40, 0x1, 0) },
-	.ndiv	= CLKGEN_FIELD(0x0, 0x1, 15),
-	.bwfilter_present = true,
-	.ref_bw = CLKGEN_FIELD(0x0, 0x3, 16),
-	.pe	= { CLKGEN_FIELD(0x8, 0xffff, 0),
-		    CLKGEN_FIELD(0x18, 0xffff, 0),
-		    CLKGEN_FIELD(0x28, 0xffff, 0),
-		    CLKGEN_FIELD(0x38, 0xffff, 0) },
-	.sdiv	= { CLKGEN_FIELD(0xC, 0x7, 0),
-		    CLKGEN_FIELD(0x1C, 0x7, 0),
-		    CLKGEN_FIELD(0x2C, 0x7, 0),
-		    CLKGEN_FIELD(0x3C, 0x7, 0) },
-	.pll_ops	= &st_quadfs_pll_c65_ops,
-	.rtbl		= fs432c65_rtbl,
-	.rtbl_cnt	= ARRAY_SIZE(fs432c65_rtbl),
-	.get_rate	= clk_fs432c65_get_rate,
-};
-
-static const struct clkgen_quadfs_data st_fs660c32_E_416 = {
-	.npda	= CLKGEN_FIELD(0x0, 0x1, 14),
-	.nsb	= { CLKGEN_FIELD(0x0, 0x1, 10),
-		    CLKGEN_FIELD(0x0, 0x1, 11),
-		    CLKGEN_FIELD(0x0, 0x1, 12),
-		    CLKGEN_FIELD(0x0, 0x1, 13) },
-	.nsdiv_present = true,
-	.nsdiv	= { CLKGEN_FIELD(0x0, 0x1, 18),
-		    CLKGEN_FIELD(0x0, 0x1, 19),
-		    CLKGEN_FIELD(0x0, 0x1, 20),
-		    CLKGEN_FIELD(0x0, 0x1, 21) },
-	.mdiv	= { CLKGEN_FIELD(0x4, 0x1f, 0),
-		    CLKGEN_FIELD(0x14, 0x1f, 0),
-		    CLKGEN_FIELD(0x24, 0x1f, 0),
-		    CLKGEN_FIELD(0x34, 0x1f, 0) },
-	.en	= { CLKGEN_FIELD(0x10, 0x1, 0),
-		    CLKGEN_FIELD(0x20, 0x1, 0),
-		    CLKGEN_FIELD(0x30, 0x1, 0),
-		    CLKGEN_FIELD(0x40, 0x1, 0) },
-	.ndiv	= CLKGEN_FIELD(0x0, 0x7, 15),
-	.pe	= { CLKGEN_FIELD(0x8, 0x7fff, 0),
-		    CLKGEN_FIELD(0x18, 0x7fff, 0),
-		    CLKGEN_FIELD(0x28, 0x7fff, 0),
-		    CLKGEN_FIELD(0x38, 0x7fff, 0) },
-	.sdiv	= { CLKGEN_FIELD(0xC, 0xf, 0),
-		    CLKGEN_FIELD(0x1C, 0xf, 0),
-		    CLKGEN_FIELD(0x2C, 0xf, 0),
-		    CLKGEN_FIELD(0x3C, 0xf, 0) },
-	.lockstatus_present = true,
-	.lock_status = CLKGEN_FIELD(0xAC, 0x1, 0),
-	.pll_ops	= &st_quadfs_pll_c32_ops,
-	.rtbl		= fs660c32_rtbl,
-	.rtbl_cnt	= ARRAY_SIZE(fs660c32_rtbl),
-	.get_rate	= clk_fs660c32_dig_get_rate,
-};
-
-static const struct clkgen_quadfs_data st_fs660c32_F_416 = {
-	.npda	= CLKGEN_FIELD(0x0, 0x1, 14),
-	.nsb	= { CLKGEN_FIELD(0x0, 0x1, 10),
-		    CLKGEN_FIELD(0x0, 0x1, 11),
-		    CLKGEN_FIELD(0x0, 0x1, 12),
-		    CLKGEN_FIELD(0x0, 0x1, 13) },
-	.nsdiv_present = true,
-	.nsdiv	= { CLKGEN_FIELD(0x0, 0x1, 18),
-		    CLKGEN_FIELD(0x0, 0x1, 19),
-		    CLKGEN_FIELD(0x0, 0x1, 20),
-		    CLKGEN_FIELD(0x0, 0x1, 21) },
-	.mdiv	= { CLKGEN_FIELD(0x4, 0x1f, 0),
-		    CLKGEN_FIELD(0x14, 0x1f, 0),
-		    CLKGEN_FIELD(0x24, 0x1f, 0),
-		    CLKGEN_FIELD(0x34, 0x1f, 0) },
-	.en	= { CLKGEN_FIELD(0x10, 0x1, 0),
-		    CLKGEN_FIELD(0x20, 0x1, 0),
-		    CLKGEN_FIELD(0x30, 0x1, 0),
-		    CLKGEN_FIELD(0x40, 0x1, 0) },
-	.ndiv	= CLKGEN_FIELD(0x0, 0x7, 15),
-	.pe	= { CLKGEN_FIELD(0x8, 0x7fff, 0),
-		    CLKGEN_FIELD(0x18, 0x7fff, 0),
-		    CLKGEN_FIELD(0x28, 0x7fff, 0),
-		    CLKGEN_FIELD(0x38, 0x7fff, 0) },
-	.sdiv	= { CLKGEN_FIELD(0xC, 0xf, 0),
-		    CLKGEN_FIELD(0x1C, 0xf, 0),
-		    CLKGEN_FIELD(0x2C, 0xf, 0),
-		    CLKGEN_FIELD(0x3C, 0xf, 0) },
-	.lockstatus_present = true,
-	.lock_status = CLKGEN_FIELD(0xEC, 0x1, 0),
-	.pll_ops	= &st_quadfs_pll_c32_ops,
-	.rtbl		= fs660c32_rtbl,
-	.rtbl_cnt	= ARRAY_SIZE(fs660c32_rtbl),
-	.get_rate	= clk_fs660c32_dig_get_rate,
-};
 
 static const struct clkgen_quadfs_data st_fs660c32_C = {
 	.nrst_present = true,
@@ -605,12 +409,6 @@ static int quadfs_pll_fs660c32_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-static const struct clk_ops st_quadfs_pll_c65_ops = {
-	.enable		= quadfs_pll_enable,
-	.disable	= quadfs_pll_disable,
-	.is_enabled	= quadfs_pll_is_enabled,
-};
-
 static const struct clk_ops st_quadfs_pll_c32_ops = {
 	.enable		= quadfs_pll_enable,
 	.disable	= quadfs_pll_disable,
@@ -797,48 +595,6 @@ static int quadfs_fsynth_is_enabled(struct clk_hw *hw)
 	return fs->data->standby_polarity ? !nsb : !!nsb;
 }
 
-#define P15			(uint64_t)(1 << 15)
-
-static int clk_fs216c65_get_rate(unsigned long input, const struct stm_fs *fs,
-		unsigned long *rate)
-{
-	uint64_t res;
-	unsigned long ns;
-	unsigned long nd = 8; /* ndiv stuck at 0 => val = 8 */
-	unsigned long s;
-	long m;
-
-	m = fs->mdiv - 32;
-	s = 1 << (fs->sdiv + 1);
-	ns = (fs->nsdiv ? 1 : 3);
-
-	res = (uint64_t)(s * ns * P15 * (uint64_t)(m + 33));
-	res = res - (s * ns * fs->pe);
-	*rate = div64_u64(P15 * nd * input * 32, res);
-
-	return 0;
-}
-
-static int clk_fs432c65_get_rate(unsigned long input, const struct stm_fs *fs,
-		unsigned long *rate)
-{
-	uint64_t res;
-	unsigned long nd = 16; /* ndiv value; stuck at 0 (30Mhz input) */
-	long m;
-	unsigned long sd;
-	unsigned long ns;
-
-	m = fs->mdiv - 32;
-	sd = 1 << (fs->sdiv + 1);
-	ns = (fs->nsdiv ? 1 : 3);
-
-	res = (uint64_t)(sd * ns * P15 * (uint64_t)(m + 33));
-	res = res - (sd * ns * fs->pe);
-	*rate = div64_u64(P15 * nd * input * 32, res);
-
-	return 0;
-}
-
 #define P20		(uint64_t)(1 << 20)
 
 static int clk_fs660c32_dig_get_rate(unsigned long input,
@@ -1065,22 +821,6 @@ static struct clk * __init st_clk_register_quadfs_fsynth(
 
 static const struct of_device_id quadfs_of_match[] = {
 	{
-		.compatible = "st,stih416-quadfs216",
-		.data = &st_fs216c65_416
-	},
-	{
-		.compatible = "st,stih416-quadfs432",
-		.data = &st_fs432c65_416
-	},
-	{
-		.compatible = "st,stih416-quadfs660-E",
-		.data = &st_fs660c32_E_416
-	},
-	{
-		.compatible = "st,stih416-quadfs660-F",
-		.data = &st_fs660c32_F_416
-	},
-	{
 		.compatible = "st,stih407-quadfs660-C",
 		.data = &st_fs660c32_C
 	},
diff --git a/drivers/clk/st/clkgen-mux.c b/drivers/clk/st/clkgen-mux.c
index b1e10ff..6fdb1ab 100644
--- a/drivers/clk/st/clkgen-mux.c
+++ b/drivers/clk/st/clkgen-mux.c
@@ -19,9 +19,6 @@
 #include <linux/clk-provider.h>
 #include "clkgen.h"
 
-static DEFINE_SPINLOCK(clkgena_divmux_lock);
-static DEFINE_SPINLOCK(clkgenf_lock);
-
 static const char ** __init clkgen_mux_get_parents(struct device_node *np,
 						       int *num_parents)
 {
@@ -40,498 +37,6 @@ static const char ** __init clkgen_mux_get_parents(struct device_node *np,
 	return parents;
 }
 
-/**
- * DOC: Clock mux with a programmable divider on each of its three inputs.
- *      The mux has an input setting which effectively gates its output.
- *
- * Traits of this clock:
- * prepare - clk_(un)prepare only ensures parent is (un)prepared
- * enable - clk_enable and clk_disable are functional & control gating
- * rate - set rate is supported
- * parent - set/get parent
- */
-
-#define NUM_INPUTS 3
-
-struct clkgena_divmux {
-	struct clk_hw hw;
-	/* Subclassed mux and divider structures */
-	struct clk_mux mux;
-	struct clk_divider div[NUM_INPUTS];
-	/* Enable/running feedback register bits for each input */
-	void __iomem *feedback_reg[NUM_INPUTS];
-	int feedback_bit_idx;
-
-	u8              muxsel;
-};
-
-#define to_clkgena_divmux(_hw) container_of(_hw, struct clkgena_divmux, hw)
-
-struct clkgena_divmux_data {
-	int num_outputs;
-	int mux_offset;
-	int mux_offset2;
-	int mux_start_bit;
-	int div_offsets[NUM_INPUTS];
-	int fb_offsets[NUM_INPUTS];
-	int fb_start_bit_idx;
-};
-
-#define CKGAX_CLKOPSRC_SWITCH_OFF 0x3
-
-static int clkgena_divmux_is_running(struct clkgena_divmux *mux)
-{
-	u32 regval = readl(mux->feedback_reg[mux->muxsel]);
-	u32 running = regval & BIT(mux->feedback_bit_idx);
-	return !!running;
-}
-
-static int clkgena_divmux_enable(struct clk_hw *hw)
-{
-	struct clkgena_divmux *genamux = to_clkgena_divmux(hw);
-	struct clk_hw *mux_hw = &genamux->mux.hw;
-	unsigned long timeout;
-	int ret = 0;
-
-	__clk_hw_set_clk(mux_hw, hw);
-
-	ret = clk_mux_ops.set_parent(mux_hw, genamux->muxsel);
-	if (ret)
-		return ret;
-
-	timeout = jiffies + msecs_to_jiffies(10);
-
-	while (!clkgena_divmux_is_running(genamux)) {
-		if (time_after(jiffies, timeout))
-			return -ETIMEDOUT;
-		cpu_relax();
-	}
-
-	return 0;
-}
-
-static void clkgena_divmux_disable(struct clk_hw *hw)
-{
-	struct clkgena_divmux *genamux = to_clkgena_divmux(hw);
-	struct clk_hw *mux_hw = &genamux->mux.hw;
-
-	__clk_hw_set_clk(mux_hw, hw);
-
-	clk_mux_ops.set_parent(mux_hw, CKGAX_CLKOPSRC_SWITCH_OFF);
-}
-
-static int clkgena_divmux_is_enabled(struct clk_hw *hw)
-{
-	struct clkgena_divmux *genamux = to_clkgena_divmux(hw);
-	struct clk_hw *mux_hw = &genamux->mux.hw;
-
-	__clk_hw_set_clk(mux_hw, hw);
-
-	return (s8)clk_mux_ops.get_parent(mux_hw) > 0;
-}
-
-static u8 clkgena_divmux_get_parent(struct clk_hw *hw)
-{
-	struct clkgena_divmux *genamux = to_clkgena_divmux(hw);
-	struct clk_hw *mux_hw = &genamux->mux.hw;
-
-	__clk_hw_set_clk(mux_hw, hw);
-
-	genamux->muxsel = clk_mux_ops.get_parent(mux_hw);
-	if ((s8)genamux->muxsel < 0) {
-		pr_debug("%s: %s: Invalid parent, setting to default.\n",
-		      __func__, clk_hw_get_name(hw));
-		genamux->muxsel = 0;
-	}
-
-	return genamux->muxsel;
-}
-
-static int clkgena_divmux_set_parent(struct clk_hw *hw, u8 index)
-{
-	struct clkgena_divmux *genamux = to_clkgena_divmux(hw);
-
-	if (index >= CKGAX_CLKOPSRC_SWITCH_OFF)
-		return -EINVAL;
-
-	genamux->muxsel = index;
-
-	/*
-	 * If the mux is already enabled, call enable directly to set the
-	 * new mux position and wait for it to start running again. Otherwise
-	 * do nothing.
-	 */
-	if (clkgena_divmux_is_enabled(hw))
-		clkgena_divmux_enable(hw);
-
-	return 0;
-}
-
-static unsigned long clkgena_divmux_recalc_rate(struct clk_hw *hw,
-		unsigned long parent_rate)
-{
-	struct clkgena_divmux *genamux = to_clkgena_divmux(hw);
-	struct clk_hw *div_hw = &genamux->div[genamux->muxsel].hw;
-
-	__clk_hw_set_clk(div_hw, hw);
-
-	return clk_divider_ops.recalc_rate(div_hw, parent_rate);
-}
-
-static int clkgena_divmux_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate)
-{
-	struct clkgena_divmux *genamux = to_clkgena_divmux(hw);
-	struct clk_hw *div_hw = &genamux->div[genamux->muxsel].hw;
-
-	__clk_hw_set_clk(div_hw, hw);
-
-	return clk_divider_ops.set_rate(div_hw, rate, parent_rate);
-}
-
-static long clkgena_divmux_round_rate(struct clk_hw *hw, unsigned long rate,
-				   unsigned long *prate)
-{
-	struct clkgena_divmux *genamux = to_clkgena_divmux(hw);
-	struct clk_hw *div_hw = &genamux->div[genamux->muxsel].hw;
-
-	__clk_hw_set_clk(div_hw, hw);
-
-	return clk_divider_ops.round_rate(div_hw, rate, prate);
-}
-
-static const struct clk_ops clkgena_divmux_ops = {
-	.enable = clkgena_divmux_enable,
-	.disable = clkgena_divmux_disable,
-	.is_enabled = clkgena_divmux_is_enabled,
-	.get_parent = clkgena_divmux_get_parent,
-	.set_parent = clkgena_divmux_set_parent,
-	.round_rate = clkgena_divmux_round_rate,
-	.recalc_rate = clkgena_divmux_recalc_rate,
-	.set_rate = clkgena_divmux_set_rate,
-};
-
-/**
- * clk_register_genamux - register a genamux clock with the clock framework
- */
-static struct clk * __init clk_register_genamux(const char *name,
-				const char **parent_names, u8 num_parents,
-				void __iomem *reg,
-				const struct clkgena_divmux_data *muxdata,
-				u32 idx)
-{
-	/*
-	 * Fixed constants across all ClockgenA variants
-	 */
-	const int mux_width = 2;
-	const int divider_width = 5;
-	struct clkgena_divmux *genamux;
-	struct clk *clk;
-	struct clk_init_data init;
-	int i;
-
-	genamux = kzalloc(sizeof(*genamux), GFP_KERNEL);
-	if (!genamux)
-		return ERR_PTR(-ENOMEM);
-
-	init.name = name;
-	init.ops = &clkgena_divmux_ops;
-	init.flags = CLK_IS_BASIC | CLK_GET_RATE_NOCACHE;
-	init.parent_names = parent_names;
-	init.num_parents = num_parents;
-
-	genamux->mux.lock  = &clkgena_divmux_lock;
-	genamux->mux.mask = BIT(mux_width) - 1;
-	genamux->mux.shift = muxdata->mux_start_bit + (idx * mux_width);
-	if (genamux->mux.shift > 31) {
-		/*
-		 * We have spilled into the second mux register so
-		 * adjust the register address and the bit shift accordingly
-		 */
-		genamux->mux.reg = reg + muxdata->mux_offset2;
-		genamux->mux.shift -= 32;
-	} else {
-		genamux->mux.reg   = reg + muxdata->mux_offset;
-	}
-
-	for (i = 0; i < NUM_INPUTS; i++) {
-		/*
-		 * Divider config for each input
-		 */
-		void __iomem *divbase = reg + muxdata->div_offsets[i];
-		genamux->div[i].width = divider_width;
-		genamux->div[i].reg = divbase + (idx * sizeof(u32));
-
-		/*
-		 * Mux enabled/running feedback register for each input.
-		 */
-		genamux->feedback_reg[i] = reg + muxdata->fb_offsets[i];
-	}
-
-	genamux->feedback_bit_idx = muxdata->fb_start_bit_idx + idx;
-	genamux->hw.init = &init;
-
-	clk = clk_register(NULL, &genamux->hw);
-	if (IS_ERR(clk)) {
-		kfree(genamux);
-		goto err;
-	}
-
-	pr_debug("%s: parent %s rate %lu\n",
-			__clk_get_name(clk),
-			__clk_get_name(clk_get_parent(clk)),
-			clk_get_rate(clk));
-err:
-	return clk;
-}
-
-static struct clkgena_divmux_data st_divmux_c65hs = {
-	.num_outputs = 4,
-	.mux_offset = 0x14,
-	.mux_start_bit = 0,
-	.div_offsets = { 0x800, 0x900, 0xb00 },
-	.fb_offsets = { 0x18, 0x1c, 0x20 },
-	.fb_start_bit_idx = 0,
-};
-
-static struct clkgena_divmux_data st_divmux_c65ls = {
-	.num_outputs = 14,
-	.mux_offset = 0x14,
-	.mux_offset2 = 0x24,
-	.mux_start_bit = 8,
-	.div_offsets = { 0x810, 0xa10, 0xb10 },
-	.fb_offsets = { 0x18, 0x1c, 0x20 },
-	.fb_start_bit_idx = 4,
-};
-
-static struct clkgena_divmux_data st_divmux_c32odf0 = {
-	.num_outputs = 8,
-	.mux_offset = 0x1c,
-	.mux_start_bit = 0,
-	.div_offsets = { 0x800, 0x900, 0xa60 },
-	.fb_offsets = { 0x2c, 0x24, 0x28 },
-	.fb_start_bit_idx = 0,
-};
-
-static struct clkgena_divmux_data st_divmux_c32odf1 = {
-	.num_outputs = 8,
-	.mux_offset = 0x1c,
-	.mux_start_bit = 16,
-	.div_offsets = { 0x820, 0x980, 0xa80 },
-	.fb_offsets = { 0x2c, 0x24, 0x28 },
-	.fb_start_bit_idx = 8,
-};
-
-static struct clkgena_divmux_data st_divmux_c32odf2 = {
-	.num_outputs = 8,
-	.mux_offset = 0x20,
-	.mux_start_bit = 0,
-	.div_offsets = { 0x840, 0xa20, 0xb10 },
-	.fb_offsets = { 0x2c, 0x24, 0x28 },
-	.fb_start_bit_idx = 16,
-};
-
-static struct clkgena_divmux_data st_divmux_c32odf3 = {
-	.num_outputs = 8,
-	.mux_offset = 0x20,
-	.mux_start_bit = 16,
-	.div_offsets = { 0x860, 0xa40, 0xb30 },
-	.fb_offsets = { 0x2c, 0x24, 0x28 },
-	.fb_start_bit_idx = 24,
-};
-
-static const struct of_device_id clkgena_divmux_of_match[] = {
-	{
-		.compatible = "st,clkgena-divmux-c65-hs",
-		.data = &st_divmux_c65hs,
-	},
-	{
-		.compatible = "st,clkgena-divmux-c65-ls",
-		.data = &st_divmux_c65ls,
-	},
-	{
-		.compatible = "st,clkgena-divmux-c32-odf0",
-		.data = &st_divmux_c32odf0,
-	},
-	{
-		.compatible = "st,clkgena-divmux-c32-odf1",
-		.data = &st_divmux_c32odf1,
-	},
-	{
-		.compatible = "st,clkgena-divmux-c32-odf2",
-		.data = &st_divmux_c32odf2,
-	},
-	{
-		.compatible = "st,clkgena-divmux-c32-odf3",
-		.data = &st_divmux_c32odf3,
-	},
-	{}
-};
-
-static void __iomem * __init clkgen_get_register_base(struct device_node *np)
-{
-	struct device_node *pnode;
-	void __iomem *reg;
-
-	pnode = of_get_parent(np);
-	if (!pnode)
-		return NULL;
-
-	reg = of_iomap(pnode, 0);
-
-	of_node_put(pnode);
-	return reg;
-}
-
-static void __init st_of_clkgena_divmux_setup(struct device_node *np)
-{
-	const struct of_device_id *match;
-	const struct clkgena_divmux_data *data;
-	struct clk_onecell_data *clk_data;
-	void __iomem *reg;
-	const char **parents;
-	int num_parents = 0, i;
-
-	match = of_match_node(clkgena_divmux_of_match, np);
-	if (WARN_ON(!match))
-		return;
-
-	data = match->data;
-
-	reg = clkgen_get_register_base(np);
-	if (!reg)
-		return;
-
-	parents = clkgen_mux_get_parents(np, &num_parents);
-	if (IS_ERR(parents))
-		goto err_parents;
-
-	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
-	if (!clk_data)
-		goto err_alloc;
-
-	clk_data->clk_num = data->num_outputs;
-	clk_data->clks = kcalloc(clk_data->clk_num, sizeof(struct clk *),
-				 GFP_KERNEL);
-
-	if (!clk_data->clks)
-		goto err_alloc_clks;
-
-	for (i = 0; i < clk_data->clk_num; i++) {
-		struct clk *clk;
-		const char *clk_name;
-
-		if (of_property_read_string_index(np, "clock-output-names",
-						  i, &clk_name))
-			break;
-
-		/*
-		 * If we read an empty clock name then the output is unused
-		 */
-		if (*clk_name == '\0')
-			continue;
-
-		clk = clk_register_genamux(clk_name, parents, num_parents,
-					   reg, data, i);
-
-		if (IS_ERR(clk))
-			goto err;
-
-		clk_data->clks[i] = clk;
-	}
-
-	kfree(parents);
-
-	of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
-	return;
-err:
-	kfree(clk_data->clks);
-err_alloc_clks:
-	kfree(clk_data);
-err_alloc:
-	kfree(parents);
-err_parents:
-	iounmap(reg);
-}
-CLK_OF_DECLARE(clkgenadivmux, "st,clkgena-divmux", st_of_clkgena_divmux_setup);
-
-struct clkgena_prediv_data {
-	u32 offset;
-	u8 shift;
-	struct clk_div_table *table;
-};
-
-static struct clk_div_table prediv_table16[] = {
-	{ .val = 0, .div = 1 },
-	{ .val = 1, .div = 16 },
-	{ .div = 0 },
-};
-
-static struct clkgena_prediv_data prediv_c65_data = {
-	.offset = 0x4c,
-	.shift = 31,
-	.table = prediv_table16,
-};
-
-static struct clkgena_prediv_data prediv_c32_data = {
-	.offset = 0x50,
-	.shift = 1,
-	.table = prediv_table16,
-};
-
-static const struct of_device_id clkgena_prediv_of_match[] = {
-	{ .compatible = "st,clkgena-prediv-c65", .data = &prediv_c65_data },
-	{ .compatible = "st,clkgena-prediv-c32", .data = &prediv_c32_data },
-	{}
-};
-
-static void __init st_of_clkgena_prediv_setup(struct device_node *np)
-{
-	const struct of_device_id *match;
-	void __iomem *reg;
-	const char *parent_name, *clk_name;
-	struct clk *clk;
-	const struct clkgena_prediv_data *data;
-
-	match = of_match_node(clkgena_prediv_of_match, np);
-	if (!match) {
-		pr_err("%s: No matching data\n", __func__);
-		return;
-	}
-
-	data = match->data;
-
-	reg = clkgen_get_register_base(np);
-	if (!reg)
-		return;
-
-	parent_name = of_clk_get_parent_name(np, 0);
-	if (!parent_name)
-		goto err;
-
-	if (of_property_read_string_index(np, "clock-output-names",
-					  0, &clk_name))
-		goto err;
-
-	clk = clk_register_divider_table(NULL, clk_name, parent_name,
-					 CLK_GET_RATE_NOCACHE,
-					 reg + data->offset, data->shift, 1,
-					 0, data->table, NULL);
-	if (IS_ERR(clk))
-		goto err;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, clk);
-	pr_debug("%s: parent %s rate %u\n",
-		__clk_get_name(clk),
-		__clk_get_name(clk_get_parent(clk)),
-		(unsigned int)clk_get_rate(clk));
-
-	return;
-err:
-	iounmap(reg);
-}
-CLK_OF_DECLARE(clkgenaprediv, "st,clkgena-prediv", st_of_clkgena_prediv_setup);
-
 struct clkgen_mux_data {
 	u32 offset;
 	u8 shift;
@@ -541,49 +46,6 @@ struct clkgen_mux_data {
 	u8 mux_flags;
 };
 
-static struct clkgen_mux_data clkgen_mux_c_vcc_hd_416 = {
-	.offset = 0,
-	.shift = 0,
-	.width = 1,
-};
-
-static struct clkgen_mux_data clkgen_mux_f_vcc_fvdp_416 = {
-	.offset = 0,
-	.shift = 0,
-	.width = 1,
-};
-
-static struct clkgen_mux_data clkgen_mux_f_vcc_hva_416 = {
-	.offset = 0,
-	.shift = 0,
-	.width = 1,
-};
-
-static struct clkgen_mux_data clkgen_mux_f_vcc_hd_416 = {
-	.offset = 0,
-	.shift = 16,
-	.width = 1,
-	.lock = &clkgenf_lock,
-};
-
-static struct clkgen_mux_data clkgen_mux_c_vcc_sd_416 = {
-	.offset = 0,
-	.shift = 17,
-	.width = 1,
-	.lock = &clkgenf_lock,
-};
-
-static struct clkgen_mux_data stih415_a9_mux_data = {
-	.offset = 0,
-	.shift = 1,
-	.width = 2,
-	.lock = &clkgen_a9_lock,
-};
-static struct clkgen_mux_data stih416_a9_mux_data = {
-	.offset = 0,
-	.shift = 0,
-	.width = 2,
-};
 static struct clkgen_mux_data stih407_a9_mux_data = {
 	.offset = 0x1a4,
 	.shift = 0,
@@ -593,47 +55,18 @@ static struct clkgen_mux_data stih407_a9_mux_data = {
 
 static const struct of_device_id mux_of_match[] = {
 	{
-		.compatible = "st,stih416-clkgenc-vcc-hd",
-		.data = &clkgen_mux_c_vcc_hd_416,
-	},
-	{
-		.compatible = "st,stih416-clkgenf-vcc-fvdp",
-		.data = &clkgen_mux_f_vcc_fvdp_416,
-	},
-	{
-		.compatible = "st,stih416-clkgenf-vcc-hva",
-		.data = &clkgen_mux_f_vcc_hva_416,
-	},
-	{
-		.compatible = "st,stih416-clkgenf-vcc-hd",
-		.data = &clkgen_mux_f_vcc_hd_416,
-	},
-	{
-		.compatible = "st,stih416-clkgenf-vcc-sd",
-		.data = &clkgen_mux_c_vcc_sd_416,
-	},
-	{
-		.compatible = "st,stih415-clkgen-a9-mux",
-		.data = &stih415_a9_mux_data,
-	},
-	{
-		.compatible = "st,stih416-clkgen-a9-mux",
-		.data = &stih416_a9_mux_data,
-	},
-	{
 		.compatible = "st,stih407-clkgen-a9-mux",
 		.data = &stih407_a9_mux_data,
 	},
 	{}
 };
-
 static void __init st_of_clkgen_mux_setup(struct device_node *np)
 {
 	const struct of_device_id *match;
 	struct clk *clk;
 	void __iomem *reg;
 	const char **parents;
-	int num_parents;
+	int num_parents = 0;
 	const struct clkgen_mux_data *data;
 
 	match = of_match_node(mux_of_match, np);
@@ -680,160 +113,3 @@ err_parents:
 	iounmap(reg);
 }
 CLK_OF_DECLARE(clkgen_mux, "st,clkgen-mux", st_of_clkgen_mux_setup);
-
-#define VCC_MAX_CHANNELS 16
-
-#define VCC_GATE_OFFSET 0x0
-#define VCC_MUX_OFFSET 0x4
-#define VCC_DIV_OFFSET 0x8
-
-struct clkgen_vcc_data {
-	spinlock_t *lock;
-	unsigned long clk_flags;
-};
-
-static struct clkgen_vcc_data st_clkgenc_vcc_416 = {
-	.clk_flags = CLK_SET_RATE_PARENT,
-};
-
-static struct clkgen_vcc_data st_clkgenf_vcc_416 = {
-	.lock = &clkgenf_lock,
-};
-
-static const struct of_device_id vcc_of_match[] = {
-	{ .compatible = "st,stih416-clkgenc", .data = &st_clkgenc_vcc_416 },
-	{ .compatible = "st,stih416-clkgenf", .data = &st_clkgenf_vcc_416 },
-	{}
-};
-
-static void __init st_of_clkgen_vcc_setup(struct device_node *np)
-{
-	const struct of_device_id *match;
-	void __iomem *reg;
-	const char **parents;
-	int num_parents, i;
-	struct clk_onecell_data *clk_data;
-	const struct clkgen_vcc_data *data;
-
-	match = of_match_node(vcc_of_match, np);
-	if (WARN_ON(!match))
-		return;
-	data = match->data;
-
-	reg = of_iomap(np, 0);
-	if (!reg)
-		return;
-
-	parents = clkgen_mux_get_parents(np, &num_parents);
-	if (IS_ERR(parents))
-		goto err_parents;
-
-	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
-	if (!clk_data)
-		goto err_alloc;
-
-	clk_data->clk_num = VCC_MAX_CHANNELS;
-	clk_data->clks = kcalloc(clk_data->clk_num, sizeof(struct clk *),
-				 GFP_KERNEL);
-
-	if (!clk_data->clks)
-		goto err_alloc_clks;
-
-	for (i = 0; i < clk_data->clk_num; i++) {
-		struct clk *clk;
-		const char *clk_name;
-		struct clk_gate *gate;
-		struct clk_divider *div;
-		struct clk_mux *mux;
-
-		if (of_property_read_string_index(np, "clock-output-names",
-						  i, &clk_name))
-			break;
-
-		/*
-		 * If we read an empty clock name then the output is unused
-		 */
-		if (*clk_name == '\0')
-			continue;
-
-		gate = kzalloc(sizeof(*gate), GFP_KERNEL);
-		if (!gate)
-			goto err;
-
-		div = kzalloc(sizeof(*div), GFP_KERNEL);
-		if (!div) {
-			kfree(gate);
-			goto err;
-		}
-
-		mux = kzalloc(sizeof(*mux), GFP_KERNEL);
-		if (!mux) {
-			kfree(gate);
-			kfree(div);
-			goto err;
-		}
-
-		gate->reg = reg + VCC_GATE_OFFSET;
-		gate->bit_idx = i;
-		gate->flags = CLK_GATE_SET_TO_DISABLE;
-		gate->lock = data->lock;
-
-		div->reg = reg + VCC_DIV_OFFSET;
-		div->shift = 2 * i;
-		div->width = 2;
-		div->flags = CLK_DIVIDER_POWER_OF_TWO |
-			CLK_DIVIDER_ROUND_CLOSEST;
-
-		mux->reg = reg + VCC_MUX_OFFSET;
-		mux->shift = 2 * i;
-		mux->mask = 0x3;
-
-		clk = clk_register_composite(NULL, clk_name, parents,
-					     num_parents,
-					     &mux->hw, &clk_mux_ops,
-					     &div->hw, &clk_divider_ops,
-					     &gate->hw, &clk_gate_ops,
-					     data->clk_flags |
-					     CLK_GET_RATE_NOCACHE);
-		if (IS_ERR(clk)) {
-			kfree(gate);
-			kfree(div);
-			kfree(mux);
-			goto err;
-		}
-
-		pr_debug("%s: parent %s rate %u\n",
-			__clk_get_name(clk),
-			__clk_get_name(clk_get_parent(clk)),
-			(unsigned int)clk_get_rate(clk));
-
-		clk_data->clks[i] = clk;
-	}
-
-	kfree(parents);
-
-	of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
-	return;
-
-err:
-	for (i = 0; i < clk_data->clk_num; i++) {
-		struct clk_composite *composite;
-
-		if (!clk_data->clks[i])
-			continue;
-
-		composite = to_clk_composite(__clk_get_hw(clk_data->clks[i]));
-		kfree(to_clk_gate(composite->gate_hw));
-		kfree(to_clk_divider(composite->rate_hw));
-		kfree(to_clk_mux(composite->mux_hw));
-	}
-
-	kfree(clk_data->clks);
-err_alloc_clks:
-	kfree(clk_data);
-err_alloc:
-	kfree(parents);
-err_parents:
-	iounmap(reg);
-}
-CLK_OF_DECLARE(clkgen_vcc, "st,clkgen-vcc", st_of_clkgen_vcc_setup);
diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 0b5990e..8a1b1cf 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -26,14 +26,6 @@ static DEFINE_SPINLOCK(clkgena_c32_odf_lock);
 DEFINE_SPINLOCK(clkgen_a9_lock);
 
 /*
- * Common PLL configuration register bits for PLL800 and PLL1600 C65
- */
-#define C65_MDIV_PLL800_MASK	(0xff)
-#define C65_MDIV_PLL1600_MASK	(0x7)
-#define C65_NDIV_MASK		(0xff)
-#define C65_PDIV_MASK		(0x7)
-
-/*
  * PLL configuration register bits for PLL3200 C32
  */
 #define C32_NDIV_MASK (0xff)
@@ -70,144 +62,10 @@ struct clkgen_pll_data {
 	const struct clk_ops *ops;
 };
 
-static const struct clk_ops st_pll1600c65_ops;
-static const struct clk_ops st_pll800c65_ops;
 static const struct clk_ops stm_pll3200c32_ops;
 static const struct clk_ops stm_pll3200c32_a9_ops;
-static const struct clk_ops st_pll1200c32_ops;
 static const struct clk_ops stm_pll4600c28_ops;
 
-static const struct clkgen_pll_data st_pll1600c65_ax = {
-	.pdn_status	= CLKGEN_FIELD(0x0, 0x1,			19),
-	.pdn_ctrl	= CLKGEN_FIELD(0x10,	0x1,			0),
-	.locked_status	= CLKGEN_FIELD(0x0, 0x1,			31),
-	.mdiv		= CLKGEN_FIELD(0x0, C65_MDIV_PLL1600_MASK,	0),
-	.ndiv		= CLKGEN_FIELD(0x0, C65_NDIV_MASK,		8),
-	.ops		= &st_pll1600c65_ops
-};
-
-static const struct clkgen_pll_data st_pll800c65_ax = {
-	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			19),
-	.pdn_ctrl	= CLKGEN_FIELD(0xC,	0x1,			1),
-	.locked_status	= CLKGEN_FIELD(0x0,	0x1,			31),
-	.mdiv		= CLKGEN_FIELD(0x0,	C65_MDIV_PLL800_MASK,	0),
-	.ndiv		= CLKGEN_FIELD(0x0,	C65_NDIV_MASK,		8),
-	.pdiv		= CLKGEN_FIELD(0x0,	C65_PDIV_MASK,		16),
-	.ops		= &st_pll800c65_ops
-};
-
-static const struct clkgen_pll_data st_pll3200c32_a1x_0 = {
-	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			31),
-	.pdn_ctrl	= CLKGEN_FIELD(0x18,	0x1,			0),
-	.locked_status	= CLKGEN_FIELD(0x4,	0x1,			31),
-	.ndiv		= CLKGEN_FIELD(0x0,	C32_NDIV_MASK,		0x0),
-	.idf		= CLKGEN_FIELD(0x4,	C32_IDF_MASK,		0x0),
-	.num_odfs = 4,
-	.odf =	{	CLKGEN_FIELD(0x54,	C32_ODF_MASK,		4),
-			CLKGEN_FIELD(0x54,	C32_ODF_MASK,		10),
-			CLKGEN_FIELD(0x54,	C32_ODF_MASK,		16),
-			CLKGEN_FIELD(0x54,	C32_ODF_MASK,		22) },
-	.odf_gate = {	CLKGEN_FIELD(0x54,	0x1,			0),
-			CLKGEN_FIELD(0x54,	0x1,			1),
-			CLKGEN_FIELD(0x54,	0x1,			2),
-			CLKGEN_FIELD(0x54,	0x1,			3) },
-	.ops		= &stm_pll3200c32_ops,
-};
-
-static const struct clkgen_pll_data st_pll3200c32_a1x_1 = {
-	.pdn_status	= CLKGEN_FIELD(0xC,	0x1,			31),
-	.pdn_ctrl	= CLKGEN_FIELD(0x18,	0x1,			1),
-	.locked_status	= CLKGEN_FIELD(0x10,	0x1,			31),
-	.ndiv		= CLKGEN_FIELD(0xC,	C32_NDIV_MASK,		0x0),
-	.idf		= CLKGEN_FIELD(0x10,	C32_IDF_MASK,		0x0),
-	.num_odfs = 4,
-	.odf = {	CLKGEN_FIELD(0x58,	C32_ODF_MASK,		4),
-			CLKGEN_FIELD(0x58,	C32_ODF_MASK,		10),
-			CLKGEN_FIELD(0x58,	C32_ODF_MASK,		16),
-			CLKGEN_FIELD(0x58,	C32_ODF_MASK,		22) },
-	.odf_gate = {	CLKGEN_FIELD(0x58,	0x1,			0),
-			CLKGEN_FIELD(0x58,	0x1,			1),
-			CLKGEN_FIELD(0x58,	0x1,			2),
-			CLKGEN_FIELD(0x58,	0x1,			3) },
-	.ops		= &stm_pll3200c32_ops,
-};
-
-/* 415 specific */
-static const struct clkgen_pll_data st_pll3200c32_a9_415 = {
-	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			0),
-	.pdn_ctrl	= CLKGEN_FIELD(0x0,	0x1,			0),
-	.locked_status	= CLKGEN_FIELD(0x6C,	0x1,			0),
-	.ndiv		= CLKGEN_FIELD(0x0,	C32_NDIV_MASK,		9),
-	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		22),
-	.num_odfs = 1,
-	.odf =		{ CLKGEN_FIELD(0x0,	C32_ODF_MASK,		3) },
-	.odf_gate =	{ CLKGEN_FIELD(0x0,	0x1,			28) },
-	.ops		= &stm_pll3200c32_ops,
-};
-
-static const struct clkgen_pll_data st_pll3200c32_ddr_415 = {
-	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			0),
-	.pdn_ctrl	= CLKGEN_FIELD(0x0,	0x1,			0),
-	.locked_status	= CLKGEN_FIELD(0x100,	0x1,			0),
-	.ndiv		= CLKGEN_FIELD(0x8,	C32_NDIV_MASK,		0),
-	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		25),
-	.num_odfs = 2,
-	.odf		= { CLKGEN_FIELD(0x8,	C32_ODF_MASK,		8),
-			    CLKGEN_FIELD(0x8,	C32_ODF_MASK,		14) },
-	.odf_gate	= { CLKGEN_FIELD(0x4,	0x1,			28),
-			    CLKGEN_FIELD(0x4,	0x1,			29) },
-	.ops		= &stm_pll3200c32_ops,
-};
-
-static const struct clkgen_pll_data st_pll1200c32_gpu_415 = {
-	.pdn_status	= CLKGEN_FIELD(0x4,	0x1,			0),
-	.pdn_ctrl	= CLKGEN_FIELD(0x4,	0x1,			0),
-	.locked_status	= CLKGEN_FIELD(0x168,	0x1,			0),
-	.ldf		= CLKGEN_FIELD(0x0,	C32_LDF_MASK,		3),
-	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		0),
-	.num_odfs = 0,
-	.odf		= { CLKGEN_FIELD(0x0,	C32_ODF_MASK,		10) },
-	.ops		= &st_pll1200c32_ops,
-};
-
-/* 416 specific */
-static const struct clkgen_pll_data st_pll3200c32_a9_416 = {
-	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			0),
-	.pdn_ctrl	= CLKGEN_FIELD(0x0,	0x1,			0),
-	.locked_status	= CLKGEN_FIELD(0x6C,	0x1,			0),
-	.ndiv		= CLKGEN_FIELD(0x8,	C32_NDIV_MASK,		0),
-	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		25),
-	.num_odfs = 1,
-	.odf		= { CLKGEN_FIELD(0x8,	C32_ODF_MASK,		8) },
-	.odf_gate	= { CLKGEN_FIELD(0x4,	0x1,			28) },
-	.ops		= &stm_pll3200c32_ops,
-};
-
-static const struct clkgen_pll_data st_pll3200c32_ddr_416 = {
-	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			0),
-	.pdn_ctrl	= CLKGEN_FIELD(0x0,	0x1,			0),
-	.locked_status	= CLKGEN_FIELD(0x10C,	0x1,			0),
-	.ndiv		= CLKGEN_FIELD(0x8,	C32_NDIV_MASK,		0),
-	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		25),
-	.num_odfs = 2,
-	.odf		= { CLKGEN_FIELD(0x8,	C32_ODF_MASK,		8),
-			    CLKGEN_FIELD(0x8,	C32_ODF_MASK,		14) },
-	.odf_gate	= { CLKGEN_FIELD(0x4,	0x1,			28),
-			    CLKGEN_FIELD(0x4,	0x1,			29) },
-	.ops		= &stm_pll3200c32_ops,
-};
-
-static const struct clkgen_pll_data st_pll1200c32_gpu_416 = {
-	.pdn_status	= CLKGEN_FIELD(0x8E4,	0x1,			3),
-	.pdn_ctrl	= CLKGEN_FIELD(0x8E4,	0x1,			3),
-	.locked_status	= CLKGEN_FIELD(0x90C,	0x1,			0),
-	.ldf		= CLKGEN_FIELD(0x0,	C32_LDF_MASK,		3),
-	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		0),
-	.num_odfs = 0,
-	.odf		= { CLKGEN_FIELD(0x0,	C32_ODF_MASK,		10) },
-	.ops		= &st_pll1200c32_ops,
-};
-
 static const struct clkgen_pll_data st_pll3200c32_407_a0 = {
 	/* 407 A0 */
 	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
@@ -410,57 +268,6 @@ static void clkgen_pll_disable(struct clk_hw *hw)
 		spin_unlock_irqrestore(pll->lock, flags);
 }
 
-static unsigned long recalc_stm_pll800c65(struct clk_hw *hw,
-		unsigned long parent_rate)
-{
-	struct clkgen_pll *pll = to_clkgen_pll(hw);
-	unsigned long mdiv, ndiv, pdiv;
-	unsigned long rate;
-	uint64_t res;
-
-	if (!clkgen_pll_is_enabled(hw) || !clkgen_pll_is_locked(hw))
-		return 0;
-
-	pdiv = CLKGEN_READ(pll, pdiv);
-	mdiv = CLKGEN_READ(pll, mdiv);
-	ndiv = CLKGEN_READ(pll, ndiv);
-
-	if (!mdiv)
-		mdiv++; /* mdiv=0 or 1 => MDIV=1 */
-
-	res = (uint64_t)2 * (uint64_t)parent_rate * (uint64_t)ndiv;
-	rate = (unsigned long)div64_u64(res, mdiv * (1 << pdiv));
-
-	pr_debug("%s:%s rate %lu\n", clk_hw_get_name(hw), __func__, rate);
-
-	return rate;
-
-}
-
-static unsigned long recalc_stm_pll1600c65(struct clk_hw *hw,
-		unsigned long parent_rate)
-{
-	struct clkgen_pll *pll = to_clkgen_pll(hw);
-	unsigned long mdiv, ndiv;
-	unsigned long rate;
-
-	if (!clkgen_pll_is_enabled(hw) || !clkgen_pll_is_locked(hw))
-		return 0;
-
-	mdiv = CLKGEN_READ(pll, mdiv);
-	ndiv = CLKGEN_READ(pll, ndiv);
-
-	if (!mdiv)
-		mdiv = 1;
-
-	/* Note: input is divided by 1000 to avoid overflow */
-	rate = ((2 * (parent_rate / 1000) * ndiv) / mdiv) * 1000;
-
-	pr_debug("%s:%s rate %lu\n", clk_hw_get_name(hw), __func__, rate);
-
-	return rate;
-}
-
 static int clk_pll3200c32_get_params(unsigned long input, unsigned long output,
 			  struct stm_pll *pll)
 {
@@ -608,33 +415,6 @@ static int set_rate_stm_pll3200c32(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-static unsigned long recalc_stm_pll1200c32(struct clk_hw *hw,
-		unsigned long parent_rate)
-{
-	struct clkgen_pll *pll = to_clkgen_pll(hw);
-	unsigned long odf, ldf, idf;
-	unsigned long rate;
-
-	if (!clkgen_pll_is_enabled(hw) || !clkgen_pll_is_locked(hw))
-		return 0;
-
-	odf = CLKGEN_READ(pll, odf[0]);
-	ldf = CLKGEN_READ(pll, ldf);
-	idf = CLKGEN_READ(pll, idf);
-
-	if (!idf) /* idf==0 means 1 */
-		idf = 1;
-	if (!odf) /* odf==0 means 1 */
-		odf = 1;
-
-	/* Note: input is divided by 1000 to avoid overflow */
-	rate = (((parent_rate / 1000) * ldf) / (odf * idf)) * 1000;
-
-	pr_debug("%s:%s rate %lu\n", clk_hw_get_name(hw), __func__, rate);
-
-	return rate;
-}
-
 /* PLL output structure
  * FVCO >> /2 >> FVCOBY2 (no output)
  *                 |> Divider (ODF) >> PHI
@@ -792,20 +572,6 @@ static int set_rate_stm_pll4600c28(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-static const struct clk_ops st_pll1600c65_ops = {
-	.enable		= clkgen_pll_enable,
-	.disable	= clkgen_pll_disable,
-	.is_enabled	= clkgen_pll_is_enabled,
-	.recalc_rate	= recalc_stm_pll1600c65,
-};
-
-static const struct clk_ops st_pll800c65_ops = {
-	.enable		= clkgen_pll_enable,
-	.disable	= clkgen_pll_disable,
-	.is_enabled	= clkgen_pll_is_enabled,
-	.recalc_rate	= recalc_stm_pll800c65,
-};
-
 static const struct clk_ops stm_pll3200c32_ops = {
 	.enable		= clkgen_pll_enable,
 	.disable	= clkgen_pll_disable,
@@ -822,13 +588,6 @@ static const struct clk_ops stm_pll3200c32_a9_ops = {
 	.set_rate	= set_rate_stm_pll3200c32,
 };
 
-static const struct clk_ops st_pll1200c32_ops = {
-	.enable		= clkgen_pll_enable,
-	.disable	= clkgen_pll_disable,
-	.is_enabled	= clkgen_pll_is_enabled,
-	.recalc_rate	= recalc_stm_pll1200c32,
-};
-
 static const struct clk_ops stm_pll4600c28_ops = {
 	.enable		= clkgen_pll_enable,
 	.disable	= clkgen_pll_disable,
@@ -877,22 +636,6 @@ static struct clk * __init clkgen_pll_register(const char *parent_name,
 	return clk;
 }
 
-static struct clk * __init clkgen_c65_lsdiv_register(const char *parent_name,
-						     const char *clk_name)
-{
-	struct clk *clk;
-
-	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0, 1, 2);
-	if (IS_ERR(clk))
-		return clk;
-
-	pr_debug("%s: parent %s rate %lu\n",
-			__clk_get_name(clk),
-			__clk_get_name(clk_get_parent(clk)),
-			clk_get_rate(clk));
-	return clk;
-}
-
 static void __iomem * __init clkgen_get_register_base(
 				struct device_node *np)
 {
@@ -909,89 +652,6 @@ static void __iomem * __init clkgen_get_register_base(
 	return reg;
 }
 
-#define CLKGENAx_PLL0_OFFSET 0x0
-#define CLKGENAx_PLL1_OFFSET 0x4
-
-static void __init clkgena_c65_pll_setup(struct device_node *np)
-{
-	const int num_pll_outputs = 3;
-	struct clk_onecell_data *clk_data;
-	const char *parent_name;
-	void __iomem *reg;
-	const char *clk_name;
-
-	parent_name = of_clk_get_parent_name(np, 0);
-	if (!parent_name)
-		return;
-
-	reg = clkgen_get_register_base(np);
-	if (!reg)
-		return;
-
-	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
-	if (!clk_data)
-		return;
-
-	clk_data->clk_num = num_pll_outputs;
-	clk_data->clks = kzalloc(clk_data->clk_num * sizeof(struct clk *),
-				 GFP_KERNEL);
-
-	if (!clk_data->clks)
-		goto err;
-
-	if (of_property_read_string_index(np, "clock-output-names",
-					  0, &clk_name))
-		goto err;
-
-	/*
-	 * PLL0 HS (high speed) output
-	 */
-	clk_data->clks[0] = clkgen_pll_register(parent_name,
-			(struct clkgen_pll_data *) &st_pll1600c65_ax,
-			reg + CLKGENAx_PLL0_OFFSET, 0, clk_name, NULL);
-
-	if (IS_ERR(clk_data->clks[0]))
-		goto err;
-
-	if (of_property_read_string_index(np, "clock-output-names",
-					  1, &clk_name))
-		goto err;
-
-	/*
-	 * PLL0 LS (low speed) output, which is a fixed divide by 2 of the
-	 * high speed output.
-	 */
-	clk_data->clks[1] = clkgen_c65_lsdiv_register(__clk_get_name
-						      (clk_data->clks[0]),
-						      clk_name);
-
-	if (IS_ERR(clk_data->clks[1]))
-		goto err;
-
-	if (of_property_read_string_index(np, "clock-output-names",
-					  2, &clk_name))
-		goto err;
-
-	/*
-	 * PLL1 output
-	 */
-	clk_data->clks[2] = clkgen_pll_register(parent_name,
-			(struct clkgen_pll_data *) &st_pll800c65_ax,
-			reg + CLKGENAx_PLL1_OFFSET, 0, clk_name, NULL);
-
-	if (IS_ERR(clk_data->clks[2]))
-		goto err;
-
-	of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
-	return;
-
-err:
-	kfree(clk_data->clks);
-	kfree(clk_data);
-}
-CLK_OF_DECLARE(clkgena_c65_plls,
-	       "st,clkgena-plls-c65", clkgena_c65_pll_setup);
-
 static struct clk * __init clkgen_odf_register(const char *parent_name,
 					       void __iomem *reg,
 					       struct clkgen_pll_data *pll_data,
@@ -1044,30 +704,6 @@ static struct clk * __init clkgen_odf_register(const char *parent_name,
 
 static const struct of_device_id c32_pll_of_match[] = {
 	{
-		.compatible = "st,plls-c32-a1x-0",
-		.data = &st_pll3200c32_a1x_0,
-	},
-	{
-		.compatible = "st,plls-c32-a1x-1",
-		.data = &st_pll3200c32_a1x_1,
-	},
-	{
-		.compatible = "st,stih415-plls-c32-a9",
-		.data = &st_pll3200c32_a9_415,
-	},
-	{
-		.compatible = "st,stih415-plls-c32-ddr",
-		.data = &st_pll3200c32_ddr_415,
-	},
-	{
-		.compatible = "st,stih416-plls-c32-a9",
-		.data = &st_pll3200c32_a9_416,
-	},
-	{
-		.compatible = "st,stih416-plls-c32-ddr",
-		.data = &st_pll3200c32_ddr_416,
-	},
-	{
 		.compatible = "st,stih407-plls-c32-a0",
 		.data = &st_pll3200c32_407_a0,
 	},
@@ -1167,58 +803,3 @@ err:
 	kfree(clk_data);
 }
 CLK_OF_DECLARE(clkgen_c32_pll, "st,clkgen-plls-c32", clkgen_c32_pll_setup);
-
-static const struct of_device_id c32_gpu_pll_of_match[] = {
-	{
-		.compatible = "st,stih415-gpu-pll-c32",
-		.data = &st_pll1200c32_gpu_415,
-	},
-	{
-		.compatible = "st,stih416-gpu-pll-c32",
-		.data = &st_pll1200c32_gpu_416,
-	},
-	{}
-};
-
-static void __init clkgengpu_c32_pll_setup(struct device_node *np)
-{
-	const struct of_device_id *match;
-	struct clk *clk;
-	const char *parent_name;
-	void __iomem *reg;
-	const char *clk_name;
-	struct clkgen_pll_data	*data;
-
-	match = of_match_node(c32_gpu_pll_of_match, np);
-	if (!match) {
-		pr_err("%s: No matching data\n", __func__);
-		return;
-	}
-
-	data = (struct clkgen_pll_data *)match->data;
-
-	parent_name = of_clk_get_parent_name(np, 0);
-	if (!parent_name)
-		return;
-
-	reg = clkgen_get_register_base(np);
-	if (!reg)
-		return;
-
-	if (of_property_read_string_index(np, "clock-output-names",
-					  0, &clk_name))
-		return;
-
-	/*
-	 * PLL 1200MHz output
-	 */
-	clk = clkgen_pll_register(parent_name, data, reg,
-				  0, clk_name, data->lock);
-
-	if (!IS_ERR(clk))
-		of_clk_add_provider(np, of_clk_src_simple_get, clk);
-
-	return;
-}
-CLK_OF_DECLARE(clkgengpu_c32_pll,
-	       "st,clkgengpu-pll-c32", clkgengpu_c32_pll_setup);
-- 
1.9.1

Re: [PATCH v3 01/14] drivers: clk: st: Remove stih415-416 clock support

[Stephen Boyd]

On 08/29, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> STiH415 and STiH416 platforms are no longer used.
> these platforms will be deprecated for the next kernel.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 02/14] drivers: clk: st: Simplify clock binding of STiH4xx platforms

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch reworks the clock binding to avoid too much detail in DT.
Now we have only compatible string per type of clock
(remark from Rob https://lkml.org/lkml/2016/5/25/492)

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 .../devicetree/bindings/clock/st/st,clkgen-mux.txt |  2 +-
 .../devicetree/bindings/clock/st/st,clkgen-pll.txt | 11 ++--
 .../devicetree/bindings/clock/st/st,clkgen.txt     |  2 +-
 .../devicetree/bindings/clock/st/st,quadfs.txt     |  6 +--
 drivers/clk/st/clkgen-fsyn.c                       | 41 ++++++--------
 drivers/clk/st/clkgen-mux.c                        | 28 ++++------
 drivers/clk/st/clkgen-pll.c                        | 63 ++++++++++------------
 7 files changed, 65 insertions(+), 88 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
index 4d277d6..9a46cb1 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -10,7 +10,7 @@ This binding uses the common clock binding[1].
 Required properties:
 
 - compatible : shall be:
-	"st,stih407-clkgen-a9-mux",	"st,clkgen-mux"
+	"st,stih407-clkgen-a9-mux"
 
 - #clock-cells : from common clock binding; shall be set to 0.
 
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index c9fd674..f207053 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -9,11 +9,10 @@ Base address is located to the parent node. See clock binding[2]
 Required properties:
 
 - compatible : shall be:
-	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
-	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
-	"sst,plls-c32-cx_0",		"st,clkgen-plls-c32"
-	"sst,plls-c32-cx_1",		"st,clkgen-plls-c32"
-	"st,stih418-plls-c28-a9",	"st,clkgen-plls-c32"
+	"st,clkgen-pll0"
+	"st,clkgen-pll1"
+	"st,stih407-clkgen-plla9"
+	"st,stih418-clkgen-plla9"
 
 - #clock-cells : From common clock binding; shall be set to 1.
 
@@ -29,7 +28,7 @@ Example:
 
 		clockgen_a9_pll: clockgen-a9-pll {
 			#clock-cells = <1>;
-			compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+			compatible = "st,stih407-clkgen-plla9";
 
 			clocks = <&clk_sysin>;
 
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index c764d6b..c35390f 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -48,7 +48,7 @@ Example:
 
 		clk_s_a0_pll: clk-s-a0-pll {
 			#clock-cells = <1>;
-			compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+			compatible = "st,clkgen-pll0";
 
 			clocks = <&clk_sysin>;
 
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
index 6d81b11..d93d493 100644
--- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -11,8 +11,8 @@ This binding uses the common clock binding[1].
 
 Required properties:
 - compatible : shall be:
-  "st,stih407-quadfs660-C",	"st,quadfs"
-  "st,stih407-quadfs660-D",	"st,quadfs"
+  "st,quadfs"
+  "st,quadfs-pll"
 
 
 - #clock-cells : from common clock binding; shall be set to 1.
@@ -33,7 +33,7 @@ Example:
 
 	clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 		#clock-cells = <1>;
-		compatible = "st,stih407-quadfs660-C", "st,quadfs";
+		compatible = "st,quadfs-pll";
 		reg = <0x9103000 0x1000>;
 
 		clocks = <&clk_sysin>;
diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 942c187..2f11bbd 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -819,18 +819,6 @@ static struct clk * __init st_clk_register_quadfs_fsynth(
 	return clk;
 }
 
-static const struct of_device_id quadfs_of_match[] = {
-	{
-		.compatible = "st,stih407-quadfs660-C",
-		.data = &st_fs660c32_C
-	},
-	{
-		.compatible = "st,stih407-quadfs660-D",
-		.data = &st_fs660c32_D
-	},
-	{}
-};
-
 static void __init st_of_create_quadfs_fsynths(
 		struct device_node *np, const char *pll_name,
 		struct clkgen_quadfs_data *quadfs, void __iomem *reg,
@@ -890,18 +878,14 @@ static void __init st_of_create_quadfs_fsynths(
 	of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
 }
 
-static void __init st_of_quadfs_setup(struct device_node *np)
+static void __init st_of_quadfs_setup(struct device_node *np,
+		struct clkgen_quadfs_data *data)
 {
-	const struct of_device_id *match;
 	struct clk *clk;
 	const char *pll_name, *clk_parent_name;
 	void __iomem *reg;
 	spinlock_t *lock;
 
-	match = of_match_node(quadfs_of_match, np);
-	if (WARN_ON(!match))
-		return;
-
 	reg = of_iomap(np, 0);
 	if (!reg)
 		return;
@@ -920,8 +904,8 @@ static void __init st_of_quadfs_setup(struct device_node *np)
 
 	spin_lock_init(lock);
 
-	clk = st_clk_register_quadfs_pll(pll_name, clk_parent_name,
-			(struct clkgen_quadfs_data *) match->data, reg, lock);
+	clk = st_clk_register_quadfs_pll(pll_name, clk_parent_name, data,
+			reg, lock);
 	if (IS_ERR(clk))
 		goto err_exit;
 	else
@@ -930,11 +914,20 @@ static void __init st_of_quadfs_setup(struct device_node *np)
 			__clk_get_name(clk_get_parent(clk)),
 			(unsigned int)clk_get_rate(clk));
 
-	st_of_create_quadfs_fsynths(np, pll_name,
-				    (struct clkgen_quadfs_data *)match->data,
-				    reg, lock);
+	st_of_create_quadfs_fsynths(np, pll_name, data, reg, lock);
 
 err_exit:
 	kfree(pll_name); /* No longer need local copy of the PLL name */
 }
-CLK_OF_DECLARE(quadfs, "st,quadfs", st_of_quadfs_setup);
+
+static void __init st_of_quadfs660C_setup(struct device_node *np)
+{
+	st_of_quadfs_setup(np, (struct clkgen_quadfs_data *) &st_fs660c32_C);
+}
+CLK_OF_DECLARE(quadfs660C, "st,quadfs-pll", st_of_quadfs660C_setup);
+
+static void __init st_of_quadfs660D_setup(struct device_node *np)
+{
+	st_of_quadfs_setup(np, (struct clkgen_quadfs_data *) &st_fs660c32_D);
+}
+CLK_OF_DECLARE(quadfs660D, "st,quadfs", st_of_quadfs660D_setup);
diff --git a/drivers/clk/st/clkgen-mux.c b/drivers/clk/st/clkgen-mux.c
index 6fdb1ab..c514d39 100644
--- a/drivers/clk/st/clkgen-mux.c
+++ b/drivers/clk/st/clkgen-mux.c
@@ -53,29 +53,13 @@ static struct clkgen_mux_data stih407_a9_mux_data = {
 	.lock = &clkgen_a9_lock,
 };
 
-static const struct of_device_id mux_of_match[] = {
-	{
-		.compatible = "st,stih407-clkgen-a9-mux",
-		.data = &stih407_a9_mux_data,
-	},
-	{}
-};
-static void __init st_of_clkgen_mux_setup(struct device_node *np)
+static void __init st_of_clkgen_mux_setup(struct device_node *np,
+		struct clkgen_mux_data *data)
 {
-	const struct of_device_id *match;
 	struct clk *clk;
 	void __iomem *reg;
 	const char **parents;
 	int num_parents = 0;
-	const struct clkgen_mux_data *data;
-
-	match = of_match_node(mux_of_match, np);
-	if (!match) {
-		pr_err("%s: No matching data\n", __func__);
-		return;
-	}
-
-	data = match->data;
 
 	reg = of_iomap(np, 0);
 	if (!reg) {
@@ -112,4 +96,10 @@ err:
 err_parents:
 	iounmap(reg);
 }
-CLK_OF_DECLARE(clkgen_mux, "st,clkgen-mux", st_of_clkgen_mux_setup);
+
+static void __init st_of_clkgen_a9_mux_setup(struct device_node *np)
+{
+	st_of_clkgen_mux_setup(np, &stih407_a9_mux_data);
+}
+CLK_OF_DECLARE(clkgen_a9mux, "st,stih407-clkgen-a9-mux",
+		st_of_clkgen_a9_mux_setup);
diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 8a1b1cf..25bda48 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -702,48 +702,17 @@ static struct clk * __init clkgen_odf_register(const char *parent_name,
 	return clk;
 }
 
-static const struct of_device_id c32_pll_of_match[] = {
-	{
-		.compatible = "st,stih407-plls-c32-a0",
-		.data = &st_pll3200c32_407_a0,
-	},
-	{
-		.compatible = "st,plls-c32-cx_0",
-		.data = &st_pll3200c32_cx_0,
-	},
-	{
-		.compatible = "st,plls-c32-cx_1",
-		.data = &st_pll3200c32_cx_1,
-	},
-	{
-		.compatible = "st,stih407-plls-c32-a9",
-		.data = &st_pll3200c32_407_a9,
-	},
-	{
-		.compatible = "st,stih418-plls-c28-a9",
-		.data = &st_pll4600c28_418_a9,
-	},
-	{}
-};
 
-static void __init clkgen_c32_pll_setup(struct device_node *np)
+static void __init clkgen_c32_pll_setup(struct device_node *np,
+		struct clkgen_pll_data *data)
 {
-	const struct of_device_id *match;
 	struct clk *clk;
 	const char *parent_name, *pll_name;
 	void __iomem *pll_base;
 	int num_odfs, odf;
 	struct clk_onecell_data *clk_data;
-	struct clkgen_pll_data	*data;
 	unsigned long pll_flags = 0;
 
-	match = of_match_node(c32_pll_of_match, np);
-	if (!match) {
-		pr_err("%s: No matching data\n", __func__);
-		return;
-	}
-
-	data = (struct clkgen_pll_data *) match->data;
 
 	parent_name = of_clk_get_parent_name(np, 0);
 	if (!parent_name)
@@ -802,4 +771,30 @@ err:
 	kfree(clk_data->clks);
 	kfree(clk_data);
 }
-CLK_OF_DECLARE(clkgen_c32_pll, "st,clkgen-plls-c32", clkgen_c32_pll_setup);
+static void __init clkgen_c32_pll0_setup(struct device_node *np)
+{
+	clkgen_c32_pll_setup(np,
+			(struct clkgen_pll_data *) &st_pll3200c32_cx_0);
+}
+CLK_OF_DECLARE(c32_pll0, "st,clkgen-pll0", clkgen_c32_pll0_setup);
+
+static void __init clkgen_c32_pll1_setup(struct device_node *np)
+{
+	clkgen_c32_pll_setup(np,
+			(struct clkgen_pll_data *) &st_pll3200c32_cx_1);
+}
+CLK_OF_DECLARE(c32_pll1, "st,clkgen-pll1", clkgen_c32_pll1_setup);
+
+static void __init clkgen_c32_plla9_setup(struct device_node *np)
+{
+	clkgen_c32_pll_setup(np,
+			(struct clkgen_pll_data *) &st_pll3200c32_407_a9);
+}
+CLK_OF_DECLARE(c32_plla9, "st,stih407-clkgen-plla9", clkgen_c32_plla9_setup);
+
+static void __init clkgen_c28_plla9_setup(struct device_node *np)
+{
+	clkgen_c32_pll_setup(np,
+			(struct clkgen_pll_data *) &st_pll4600c28_418_a9);
+}
+CLK_OF_DECLARE(c28_plla9, "st,stih418-clkgen-plla9", clkgen_c28_plla9_setup);
-- 
1.9.1

Re: [PATCH v3 02/14] drivers: clk: st: Simplify clock binding of STiH4xx platforms

[Stephen Boyd]

On 08/29, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch reworks the clock binding to avoid too much detail in DT.
> Now we have only compatible string per type of clock
> (remark from Rob https://lkml.org/lkml/2016/5/25/492)
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 03/14] ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch simplifies the clock binding because we had too much detail.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 18 +++++++++---------
 arch/arm/boot/dts/stih410-clock.dtsi | 16 ++++++++--------
 arch/arm/boot/dts/stih418-clock.dtsi | 16 ++++++++--------
 3 files changed, 25 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index ad45f5e..38a56d7 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -42,7 +42,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -55,7 +55,7 @@
 		 */
 		clk_m_a9: clk-m-a9@92b0000 {
 			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			compatible = "st,stih407-clkgen-a9-mux";
 			reg = <0x92b0000 0x10000>;
 
 			clocks = <&clockgen_a9_pll 0>,
@@ -96,7 +96,7 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -117,7 +117,7 @@
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -134,7 +134,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -143,7 +143,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -199,7 +199,7 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -233,7 +233,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -287,7 +287,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index fd50496..e8f4d44 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -44,7 +44,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -98,7 +98,7 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -122,7 +122,7 @@
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -140,7 +140,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -150,7 +150,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -218,7 +218,7 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -254,7 +254,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -308,7 +308,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index ae6d997..0fd0fa5 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -44,7 +44,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih418-plls-c28-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih418-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -98,7 +98,7 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -120,7 +120,7 @@
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -137,7 +137,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -146,7 +146,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -212,7 +212,7 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -248,7 +248,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -309,7 +309,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
-- 
1.9.1

Re: [PATCH v3 03/14] ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms

[Patrice Chotard]

On 08/29/2016 02:26 PM, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch simplifies the clock binding because we had too much detail.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
>  arch/arm/boot/dts/stih407-clock.dtsi | 18 +++++++++---------
>  arch/arm/boot/dts/stih410-clock.dtsi | 16 ++++++++--------
>  arch/arm/boot/dts/stih418-clock.dtsi | 16 ++++++++--------
>  3 files changed, 25 insertions(+), 25 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
> index ad45f5e..38a56d7 100644
> --- a/arch/arm/boot/dts/stih407-clock.dtsi
> +++ b/arch/arm/boot/dts/stih407-clock.dtsi
> @@ -42,7 +42,7 @@

[...]
> @@ -309,7 +309,7 @@
>  
>  		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
>  			#clock-cells = <1>;
> -			compatible = "st,stih407-quadfs660-D", "st,quadfs";
> +			compatible = "st,quadfs";
>  			reg = <0x9107000 0x1000>;
>  
>  			clocks = <&clk_sysin>;
> 


Hi Gabriel

Applied on STi tree for v4.9

Thanks

[PATCH v3 04/14] drivers: clk: st: Add fs660c32 synthesizer algorithm

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

Use an algorithm instead of a table to compute clocks for fs660c32
synthesizer.
During a video playback we need to adjust audio & video frequencies.
A table can't cover all HDMI resolutions and audio adjustment.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 drivers/clk/st/clkgen-fsyn.c | 180 ++++++++++++++++++++++++++-----------------
 1 file changed, 111 insertions(+), 69 deletions(-)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 2f11bbd..14819d9 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -42,40 +42,6 @@ struct stm_fs {
 	unsigned long nsdiv;
 };
 
-static const struct stm_fs fs660c32_rtbl[] = {
-	{ .mdiv = 0x14, .pe = 0x376b,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.175  MHz */
-	{ .mdiv = 0x14, .pe = 0x30c3,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.200  MHz */
-	{ .mdiv = 0x10, .pe = 0x71c7,	.sdiv = 0x4,	.nsdiv = 1 },	/* 27.000  MHz */
-	{ .mdiv = 0x00, .pe = 0x47af,	.sdiv = 0x3,	.nsdiv = 0 },	/* 27.027  MHz */
-	{ .mdiv = 0x0e, .pe = 0x4e1a,	.sdiv = 0x4,	.nsdiv = 1 },	/* 28.320  MHz */
-	{ .mdiv = 0x0b, .pe = 0x534d,	.sdiv = 0x4,	.nsdiv = 1 },	/* 30.240  MHz */
-	{ .mdiv = 0x17, .pe = 0x6fbf,	.sdiv = 0x2,	.nsdiv = 0 },	/* 31.500  MHz */
-	{ .mdiv = 0x01, .pe = 0x0,	.sdiv = 0x4,	.nsdiv = 1 },	/* 40.000  MHz */
-	{ .mdiv = 0x15, .pe = 0x2aab,	.sdiv = 0x3,	.nsdiv = 1 },	/* 49.500  MHz */
-	{ .mdiv = 0x14, .pe = 0x6666,	.sdiv = 0x3,	.nsdiv = 1 },	/* 50.000  MHz */
-	{ .mdiv = 0x1d, .pe = 0x395f,	.sdiv = 0x1,	.nsdiv = 0 },	/* 57.284  MHz */
-	{ .mdiv = 0x08, .pe = 0x4ec5,	.sdiv = 0x3,	.nsdiv = 1 },	/* 65.000  MHz */
-	{ .mdiv = 0x05, .pe = 0x1770,	.sdiv = 0x3,	.nsdiv = 1 },	/* 71.000  MHz */
-	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x3,	.nsdiv = 1 },	/* 74.176  MHz */
-	{ .mdiv = 0x0f, .pe = 0x3426,	.sdiv = 0x1,	.nsdiv = 0 },	/* 74.250  MHz */
-	{ .mdiv = 0x0e, .pe = 0x7777,	.sdiv = 0x1,	.nsdiv = 0 },	/* 75.000  MHz */
-	{ .mdiv = 0x01, .pe = 0x4053,	.sdiv = 0x3,	.nsdiv = 1 },	/* 78.800  MHz */
-	{ .mdiv = 0x09, .pe = 0x15b5,	.sdiv = 0x1,	.nsdiv = 0 },	/* 85.500  MHz */
-	{ .mdiv = 0x1b, .pe = 0x3f19,	.sdiv = 0x2,	.nsdiv = 1 },	/* 88.750  MHz */
-	{ .mdiv = 0x10, .pe = 0x71c7,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108.000 MHz */
-	{ .mdiv = 0x00, .pe = 0x47af,	.sdiv = 0x1,	.nsdiv = 0 },	/* 108.108 MHz */
-	{ .mdiv = 0x0c, .pe = 0x3118,	.sdiv = 0x2,	.nsdiv = 1 },	/* 118.963 MHz */
-	{ .mdiv = 0x0c, .pe = 0x2f54,	.sdiv = 0x2,	.nsdiv = 1 },	/* 119.000 MHz */
-	{ .mdiv = 0x07, .pe = 0xe39,	.sdiv = 0x2,	.nsdiv = 1 },	/* 135.000 MHz */
-	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x2,	.nsdiv = 1 },	/* 148.352 MHz */
-	{ .mdiv = 0x0f, .pe = 0x3426,	.sdiv = 0x0,	.nsdiv = 0 },	/* 148.500 MHz */
-	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x1,	.nsdiv = 1 },	/* 296.704 MHz */
-	{ .mdiv = 0x03, .pe = 0x471c,	.sdiv = 0x1,	.nsdiv = 1 },	/* 297.000 MHz */
-	{ .mdiv = 0x00, .pe = 0x295f,	.sdiv = 0x1,	.nsdiv = 1 },	/* 326.700 MHz */
-	{ .mdiv = 0x1f, .pe = 0x3633,	.sdiv = 0x0,	.nsdiv = 1 },	/* 333.000 MHz */
-	{ .mdiv = 0x1c, .pe = 0x0,	.sdiv = 0x0,	.nsdiv = 1 },	/* 352.000 Mhz */
-};
-
 struct clkgen_quadfs_data {
 	bool reset_present;
 	bool bwfilter_present;
@@ -99,8 +65,7 @@ struct clkgen_quadfs_data {
 	struct clkgen_field nsdiv[QUADFS_MAX_CHAN];
 
 	const struct clk_ops *pll_ops;
-	const struct stm_fs *rtbl;
-	u8 rtbl_cnt;
+	int  (*get_params)(unsigned long, unsigned long, struct stm_fs *);
 	int  (*get_rate)(unsigned long , const struct stm_fs *,
 			unsigned long *);
 };
@@ -108,6 +73,8 @@ struct clkgen_quadfs_data {
 static const struct clk_ops st_quadfs_pll_c32_ops;
 static const struct clk_ops st_quadfs_fs660c32_ops;
 
+static int clk_fs660c32_dig_get_params(unsigned long input,
+		unsigned long output, struct stm_fs *fs);
 static int clk_fs660c32_dig_get_rate(unsigned long, const struct stm_fs *,
 		unsigned long *);
 
@@ -149,8 +116,7 @@ static const struct clkgen_quadfs_data st_fs660c32_C = {
 	.powerup_polarity = 1,
 	.standby_polarity = 1,
 	.pll_ops	= &st_quadfs_pll_c32_ops,
-	.rtbl		= fs660c32_rtbl,
-	.rtbl_cnt	= ARRAY_SIZE(fs660c32_rtbl),
+	.get_params	= clk_fs660c32_dig_get_params,
 	.get_rate	= clk_fs660c32_dig_get_rate,
 };
 
@@ -192,8 +158,7 @@ static const struct clkgen_quadfs_data st_fs660c32_D = {
 	.powerup_polarity = 1,
 	.standby_polarity = 1,
 	.pll_ops	= &st_quadfs_pll_c32_ops,
-	.rtbl		= fs660c32_rtbl,
-	.rtbl_cnt	= ARRAY_SIZE(fs660c32_rtbl),
+	.get_params	= clk_fs660c32_dig_get_params,
 	.get_rate	= clk_fs660c32_dig_get_rate,};
 
 /**
@@ -620,6 +585,107 @@ static int clk_fs660c32_dig_get_rate(unsigned long input,
 	return 0;
 }
 
+
+static int clk_fs660c32_get_pe(int m, int si, unsigned long *deviation,
+		signed long input, unsigned long output, uint64_t *p,
+		struct stm_fs *fs)
+{
+	unsigned long new_freq, new_deviation;
+	struct stm_fs fs_tmp;
+	uint64_t val;
+
+	val = (uint64_t)output << si;
+
+	*p = (uint64_t)input * P20 - (32LL  + (uint64_t)m) * val * (P20 / 32LL);
+
+	*p = div64_u64(*p, val);
+
+	if (*p > 32767LL)
+		return 1;
+
+	fs_tmp.mdiv = (unsigned long) m;
+	fs_tmp.pe = (unsigned long)*p;
+	fs_tmp.sdiv = si;
+	fs_tmp.nsdiv = 1;
+
+	clk_fs660c32_dig_get_rate(input, &fs_tmp, &new_freq);
+
+	new_deviation = abs(output - new_freq);
+
+	if (new_deviation < *deviation) {
+		fs->mdiv = m;
+		fs->pe = (unsigned long)*p;
+		fs->sdiv = si;
+		fs->nsdiv = 1;
+		*deviation = new_deviation;
+	}
+	return 0;
+}
+
+static int clk_fs660c32_dig_get_params(unsigned long input,
+		unsigned long output, struct stm_fs *fs)
+{
+	int si;	/* sdiv_reg (8 downto 0) */
+	int m; /* md value */
+	unsigned long new_freq, new_deviation;
+	/* initial condition to say: "infinite deviation" */
+	unsigned long deviation = ~0;
+	uint64_t p, p1, p2;	/* pe value */
+	int r1, r2;
+
+	struct stm_fs fs_tmp;
+
+	for (si = 0; (si <= 8) && deviation; si++) {
+
+		/* Boundary test to avoid useless iteration */
+		r1 = clk_fs660c32_get_pe(0, si, &deviation,
+				input, output, &p1, fs);
+		r2 = clk_fs660c32_get_pe(31, si, &deviation,
+				input, output, &p2, fs);
+
+		/* No solution */
+		if (r1 && r2 && (p1 > p2))
+			continue;
+
+		/* Try to find best deviation */
+		for (m = 1; (m < 31) && deviation; m++)
+			clk_fs660c32_get_pe(m, si, &deviation,
+					input, output, &p, fs);
+
+	}
+
+	if (deviation == ~0) /* No solution found */
+		return -1;
+
+	/* pe fine tuning if deviation not 0: +/- 2 around computed pe value */
+	if (deviation) {
+		fs_tmp.mdiv = fs->mdiv;
+		fs_tmp.sdiv = fs->sdiv;
+		fs_tmp.nsdiv = fs->nsdiv;
+
+		if (fs->pe > 2)
+			p2 = fs->pe - 2;
+		else
+			p2 = 0;
+
+		for (; p2 < 32768ll && (p2 <= (fs->pe + 2)); p2++) {
+			fs_tmp.pe = (unsigned long)p2;
+
+			clk_fs660c32_dig_get_rate(input, &fs_tmp, &new_freq);
+
+			new_deviation = abs(output - new_freq);
+
+			/* Check if this is a better solution */
+			if (new_deviation < deviation) {
+				fs->pe = (unsigned long)p2;
+				deviation = new_deviation;
+
+			}
+		}
+	}
+	return 0;
+}
+
 static int quadfs_fsynt_get_hw_value_for_recalc(struct st_clk_quadfs_fsynth *fs,
 		struct stm_fs *params)
 {
@@ -655,38 +721,14 @@ static long quadfs_find_best_rate(struct clk_hw *hw, unsigned long drate,
 	struct st_clk_quadfs_fsynth *fs = to_quadfs_fsynth(hw);
 	int (*clk_fs_get_rate)(unsigned long ,
 				const struct stm_fs *, unsigned long *);
-	struct stm_fs prev_params;
-	unsigned long prev_rate, rate = 0;
-	unsigned long diff_rate, prev_diff_rate = ~0;
-	int index;
+	int (*clk_fs_get_params)(unsigned long, unsigned long, struct stm_fs *);
+	unsigned long rate = 0;
 
 	clk_fs_get_rate = fs->data->get_rate;
+	clk_fs_get_params = fs->data->get_params;
 
-	for (index = 0; index < fs->data->rtbl_cnt; index++) {
-		prev_rate = rate;
-
-		*params = fs->data->rtbl[index];
-		prev_params = *params;
-
-		clk_fs_get_rate(prate, &fs->data->rtbl[index], &rate);
-
-		diff_rate = abs(drate - rate);
-
-		if (diff_rate > prev_diff_rate) {
-			rate = prev_rate;
-			*params = prev_params;
-			break;
-		}
-
-		prev_diff_rate = diff_rate;
-
-		if (drate == rate)
-			return rate;
-	}
-
-
-	if (index == fs->data->rtbl_cnt)
-		*params = prev_params;
+	if (!clk_fs_get_params(prate, drate, params))
+		clk_fs_get_rate(prate, params, &rate);
 
 	return rate;
 }
-- 
1.9.1

Re: [PATCH v3 04/14] drivers: clk: st: Add fs660c32 synthesizer algorithm

[Stephen Boyd]

On 08/29, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> Use an algorithm instead of a table to compute clocks for fs660c32
> synthesizer.
> During a video playback we need to adjust audio & video frequencies.
> A table can't cover all HDMI resolutions and audio adjustment.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 05/14] drivers: clk: st: Add clock propagation for audio clocks

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch allows fine tuning of the quads FS for audio clocks
accuracy.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 .../devicetree/bindings/clock/st/st,flexgen.txt    |  2 ++
 drivers/clk/st/clk-flexgen.c                       | 26 +++++++++++++++++++++-
 2 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
index b7ee5c7..d68f6a5f 100644
--- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -60,6 +60,8 @@ This binding uses the common clock binding[2].
 Required properties:
 - compatible : shall be:
   "st,flexgen"
+  "st,flexgen-audio", "st,flexgen" (enable clock propagation on parent for
+  audio use case)
 
 - #clock-cells : from common clock binding; shall be set to 1 (multiple clock
   outputs).
diff --git a/drivers/clk/st/clk-flexgen.c b/drivers/clk/st/clk-flexgen.c
index 546bd79..7ed05f0 100644
--- a/drivers/clk/st/clk-flexgen.c
+++ b/drivers/clk/st/clk-flexgen.c
@@ -15,6 +15,10 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 
+struct clkgen_data {
+	unsigned long flags;
+};
+
 struct flexgen {
 	struct clk_hw hw;
 
@@ -259,6 +263,18 @@ static const char ** __init flexgen_get_parents(struct device_node *np,
 	return parents;
 }
 
+static const struct clkgen_data clkgen_audio = {
+	.flags = CLK_SET_RATE_PARENT,
+};
+
+static const struct of_device_id flexgen_of_match[] = {
+	{
+		.compatible = "st,flexgen-audio",
+		.data = &clkgen_audio,
+	},
+	{}
+};
+
 static void __init st_of_flexgen_setup(struct device_node *np)
 {
 	struct device_node *pnode;
@@ -267,6 +283,9 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 	const char **parents;
 	int num_parents, i;
 	spinlock_t *rlock = NULL;
+	const struct of_device_id *match;
+	struct clkgen_data *data = NULL;
+	unsigned long flex_flags = 0;
 	int ret;
 
 	pnode = of_get_parent(np);
@@ -281,6 +300,12 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 	if (!parents)
 		return;
 
+	match = of_match_node(flexgen_of_match, np);
+	if (match) {
+		data = (struct clkgen_data *)match->data;
+		flex_flags = data->flags;
+	}
+
 	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
 	if (!clk_data)
 		goto err;
@@ -307,7 +332,6 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 	for (i = 0; i < clk_data->clk_num; i++) {
 		struct clk *clk;
 		const char *clk_name;
-		unsigned long flex_flags = 0;
 
 		if (of_property_read_string_index(np, "clock-output-names",
 						  i, &clk_name)) {
-- 
1.9.1

Re: [PATCH v3 05/14] drivers: clk: st: Add clock propagation for audio clocks

[Stephen Boyd]

On 08/29, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch allows fine tuning of the quads FS for audio clocks
> accuracy.
> 
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 06/14] drivers: clk: st: Handle clk synchronous mode for video clocks

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch configures the semi-synchronous mode of the video clocks
of clkgenD2.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 .../devicetree/bindings/clock/st/st,flexgen.txt    |  2 ++
 drivers/clk/st/clk-flexgen.c                       | 37 ++++++++++++++++++++--
 2 files changed, 37 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
index d68f6a5f..7ff77fc 100644
--- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -62,6 +62,8 @@ Required properties:
   "st,flexgen"
   "st,flexgen-audio", "st,flexgen" (enable clock propagation on parent for
   audio use case)
+  "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
+					and activate synchronous mode)
 
 - #clock-cells : from common clock binding; shall be set to 1 (multiple clock
   outputs).
diff --git a/drivers/clk/st/clk-flexgen.c b/drivers/clk/st/clk-flexgen.c
index 7ed05f0..a485f3b 100644
--- a/drivers/clk/st/clk-flexgen.c
+++ b/drivers/clk/st/clk-flexgen.c
@@ -17,6 +17,7 @@
 
 struct clkgen_data {
 	unsigned long flags;
+	bool mode;
 };
 
 struct flexgen {
@@ -32,9 +33,14 @@ struct flexgen {
 	struct clk_gate fgate;
 	/* Final divisor */
 	struct clk_divider fdiv;
+	/* Asynchronous mode control */
+	struct clk_gate sync;
+	/* hw control flags */
+	bool control_mode;
 };
 
 #define to_flexgen(_hw) container_of(_hw, struct flexgen, hw)
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
 
 static int flexgen_enable(struct clk_hw *hw)
 {
@@ -143,12 +149,21 @@ static int flexgen_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct flexgen *flexgen = to_flexgen(hw);
 	struct clk_hw *pdiv_hw = &flexgen->pdiv.hw;
 	struct clk_hw *fdiv_hw = &flexgen->fdiv.hw;
+	struct clk_hw *sync_hw = &flexgen->sync.hw;
+	struct clk_gate *config = to_clk_gate(sync_hw);
 	unsigned long div = 0;
 	int ret = 0;
+	u32 reg;
 
 	__clk_hw_set_clk(pdiv_hw, hw);
 	__clk_hw_set_clk(fdiv_hw, hw);
 
+	if (flexgen->control_mode) {
+		reg = readl(config->reg);
+		reg &= ~BIT(config->bit_idx);
+		writel(reg, config->reg);
+	}
+
 	div = clk_best_div(parent_rate, rate);
 
 	/*
@@ -182,7 +197,7 @@ static const struct clk_ops flexgen_ops = {
 static struct clk *clk_register_flexgen(const char *name,
 				const char **parent_names, u8 num_parents,
 				void __iomem *reg, spinlock_t *lock, u32 idx,
-				unsigned long flexgen_flags) {
+				unsigned long flexgen_flags, bool mode) {
 	struct flexgen *fgxbar;
 	struct clk *clk;
 	struct clk_init_data init;
@@ -231,6 +246,13 @@ static struct clk *clk_register_flexgen(const char *name,
 	fgxbar->fdiv.reg = fdiv_reg;
 	fgxbar->fdiv.width = 6;
 
+	/* Final divider sync config */
+	fgxbar->sync.lock = lock;
+	fgxbar->sync.reg = fdiv_reg;
+	fgxbar->sync.bit_idx = 7;
+
+	fgxbar->control_mode = mode;
+
 	fgxbar->hw.init = &init;
 
 	clk = clk_register(NULL, &fgxbar->hw);
@@ -267,11 +289,20 @@ static const struct clkgen_data clkgen_audio = {
 	.flags = CLK_SET_RATE_PARENT,
 };
 
+static const struct clkgen_data clkgen_video = {
+	.flags = CLK_SET_RATE_PARENT,
+	.mode = 1,
+};
+
 static const struct of_device_id flexgen_of_match[] = {
 	{
 		.compatible = "st,flexgen-audio",
 		.data = &clkgen_audio,
 	},
+	{
+		.compatible = "st,flexgen-video",
+		.data = &clkgen_video,
+	},
 	{}
 };
 
@@ -287,6 +318,7 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 	struct clkgen_data *data = NULL;
 	unsigned long flex_flags = 0;
 	int ret;
+	bool clk_mode = 0;
 
 	pnode = of_get_parent(np);
 	if (!pnode)
@@ -304,6 +336,7 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 	if (match) {
 		data = (struct clkgen_data *)match->data;
 		flex_flags = data->flags;
+		clk_mode = data->mode;
 	}
 
 	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
@@ -347,7 +380,7 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 			continue;
 
 		clk = clk_register_flexgen(clk_name, parents, num_parents,
-					   reg, rlock, i, flex_flags);
+					   reg, rlock, i, flex_flags, clk_mode);
 
 		if (IS_ERR(clk))
 			goto err;
-- 
1.9.1

[PATCH v3 07/14] ARM: DT: STiH407: Enable clock propagation for audio clocks

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch is used in the clock driver to apply a clock propagation
flag on the audio clocks of STiH407

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 38a56d7..c4a8f1c 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -216,7 +216,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
-- 
1.9.1

Re: [PATCH v3 07/14] ARM: DT: STiH407: Enable clock propagation for audio clocks

[Patrice Chotard]

On 08/29/2016 02:26 PM, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch is used in the clock driver to apply a clock propagation
> flag on the audio clocks of STiH407
> 
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  arch/arm/boot/dts/stih407-clock.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
> index 38a56d7..c4a8f1c 100644
> --- a/arch/arm/boot/dts/stih407-clock.dtsi
> +++ b/arch/arm/boot/dts/stih407-clock.dtsi
> @@ -216,7 +216,7 @@
>  
>  			clk_s_d0_flexgen: clk-s-d0-flexgen {
>  				#clock-cells = <1>;
> -				compatible = "st,flexgen";
> +				compatible = "st,flexgen-audio", "st,flexgen";
>  
>  				clocks = <&clk_s_d0_quadfs 0>,
>  					 <&clk_s_d0_quadfs 1>,
> 


Hi Gabriel

Applied on STi tree for v4.9

Thanks

[PATCH v3 08/14] ARM: DT: STiH410: Enable clock propagation for audio clocks

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch is used in the clock driver to apply a clock propagation
flag on the audio clocks of STiH410

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih410-clock.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index e8f4d44..aec2aa7 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -235,7 +235,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
-- 
1.9.1

Re: [PATCH v3 08/14] ARM: DT: STiH410: Enable clock propagation for audio clocks

[Patrice Chotard]

On 08/29/2016 02:27 PM, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch is used in the clock driver to apply a clock propagation
> flag on the audio clocks of STiH410
> 
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  arch/arm/boot/dts/stih410-clock.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
> index e8f4d44..aec2aa7 100644
> --- a/arch/arm/boot/dts/stih410-clock.dtsi
> +++ b/arch/arm/boot/dts/stih410-clock.dtsi
> @@ -235,7 +235,7 @@
>  
>  			clk_s_d0_flexgen: clk-s-d0-flexgen {
>  				#clock-cells = <1>;
> -				compatible = "st,flexgen";
> +				compatible = "st,flexgen-audio", "st,flexgen";
>  
>  				clocks = <&clk_s_d0_quadfs 0>,
>  					 <&clk_s_d0_quadfs 1>,
> 
Hi Gabriel

Applied on STi tree for v4.9

Thanks

[PATCH v3 09/14] ARM: DT: STiH418: Enable clock propagation for audio clocks

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch is used in the clock driver to apply a clock propagation
flag on the audio clocks of STiH418

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih418-clock.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 0fd0fa5..a183583 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -229,7 +229,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
-- 
1.9.1

Re: [PATCH v3 09/14] ARM: DT: STiH418: Enable clock propagation for audio clocks

[Patrice Chotard]

On 08/29/2016 02:27 PM, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch is used in the clock driver to apply a clock propagation
> flag on the audio clocks of STiH418
> 
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  arch/arm/boot/dts/stih418-clock.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
> index 0fd0fa5..a183583 100644
> --- a/arch/arm/boot/dts/stih418-clock.dtsi
> +++ b/arch/arm/boot/dts/stih418-clock.dtsi
> @@ -229,7 +229,7 @@
>  
>  			clk_s_d0_flexgen: clk-s-d0-flexgen {
>  				#clock-cells = <1>;
> -				compatible = "st,flexgen";
> +				compatible = "st,flexgen-audio", "st,flexgen";
>  
>  				clocks = <&clk_s_d0_quadfs 0>,
>  					 <&clk_s_d0_quadfs 1>,
> 
Hi Gabriel

Applied on STi tree for v4.9

Thanks

[PATCH v3 10/14] ARM: DT: STiH407: Enable synchronous clock mode for video clocks

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch enables the synchronous clock mode for video clocks
on STiH407 board.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index c4a8f1c..13029c0 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -256,7 +256,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
-- 
1.9.1

Re: [PATCH v3 10/14] ARM: DT: STiH407: Enable synchronous clock mode for video clocks

[Patrice Chotard]

On 08/29/2016 02:27 PM, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch enables the synchronous clock mode for video clocks
> on STiH407 board.
> 
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  arch/arm/boot/dts/stih407-clock.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
> index c4a8f1c..13029c0 100644
> --- a/arch/arm/boot/dts/stih407-clock.dtsi
> +++ b/arch/arm/boot/dts/stih407-clock.dtsi
> @@ -256,7 +256,7 @@
>  
>  			clk_s_d2_flexgen: clk-s-d2-flexgen {
>  				#clock-cells = <1>;
> -				compatible = "st,flexgen";
> +				compatible = "st,flexgen-video", "st,flexgen";
>  
>  				clocks = <&clk_s_d2_quadfs 0>,
>  					 <&clk_s_d2_quadfs 1>,
> 
Hi Gabriel

Applied on STi tree for v4.9

Thanks

[PATCH v3 11/14] ARM: DT: STiH410: Enable synchronous clock mode for video clocks

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch enables the synchronous clock mode for video clocks
on STiH410 board.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih410-clock.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index aec2aa7..8598eff 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -277,7 +277,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
-- 
1.9.1

Re: [PATCH v3 11/14] ARM: DT: STiH410: Enable synchronous clock mode for video clocks

[Patrice Chotard]

On 08/29/2016 02:27 PM, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch enables the synchronous clock mode for video clocks
> on STiH410 board.
> 
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  arch/arm/boot/dts/stih410-clock.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
> index aec2aa7..8598eff 100644
> --- a/arch/arm/boot/dts/stih410-clock.dtsi
> +++ b/arch/arm/boot/dts/stih410-clock.dtsi
> @@ -277,7 +277,7 @@
>  
>  			clk_s_d2_flexgen: clk-s-d2-flexgen {
>  				#clock-cells = <1>;
> -				compatible = "st,flexgen";
> +				compatible = "st,flexgen-video", "st,flexgen";
>  
>  				clocks = <&clk_s_d2_quadfs 0>,
>  					 <&clk_s_d2_quadfs 1>,
> 
Hi Gabriel

Applied on STi tree for v4.9

Thanks

[PATCH v3 12/14] ARM: DT: STiH418: Enable synchronous clock mode for video clocks

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch enables the synchronous clock mode for video clocks
on STiH418 board.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih418-clock.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index a183583..ee6614b7 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -271,7 +271,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
-- 
1.9.1

Re: [PATCH v3 12/14] ARM: DT: STiH418: Enable synchronous clock mode for video clocks

[Patrice Chotard]

On 08/29/2016 02:27 PM, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch enables the synchronous clock mode for video clocks
> on STiH418 board.
> 
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  arch/arm/boot/dts/stih418-clock.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
> index a183583..ee6614b7 100644
> --- a/arch/arm/boot/dts/stih418-clock.dtsi
> +++ b/arch/arm/boot/dts/stih418-clock.dtsi
> @@ -271,7 +271,7 @@
>  
>  			clk_s_d2_flexgen: clk-s-d2-flexgen {
>  				#clock-cells = <1>;
> -				compatible = "st,flexgen";
> +				compatible = "st,flexgen-video", "st,flexgen";
>  
>  				clocks = <&clk_s_d2_quadfs 0>,
>  					 <&clk_s_d2_quadfs 1>,
> 
Hi Gabriel

Applied on STi tree for v4.9

Thanks

[PATCH v3 13/14] ARM: DT: STi: STiH407: clock configuration to address 720p and 1080p

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

It is necessary to properly configure these clocks in order
to address 720p and 1080p HDMI resolution.

Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih407.dtsi | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index d60f0d8..291ffac 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -16,7 +16,10 @@
 			#size-cells = <1>;
 
 			assigned-clocks	= <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
@@ -26,14 +29,21 @@
 
 			assigned-clock-parents = <0>,
 						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
 						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>;
 
-			assigned-clock-rates = <297000000>, <297000000>;
+			assigned-clock-rates = <297000000>,
+					       <108000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
 
 			ranges;
 
-- 
1.9.1

Re: [PATCH v3 13/14] ARM: DT: STi: STiH407: clock configuration to address 720p and 1080p

[Patrice Chotard]

On 08/29/2016 02:27 PM, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> It is necessary to properly configure these clocks in order
> to address 720p and 1080p HDMI resolution.
> 
> Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  arch/arm/boot/dts/stih407.dtsi | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> index d60f0d8..291ffac 100644
> --- a/arch/arm/boot/dts/stih407.dtsi
> +++ b/arch/arm/boot/dts/stih407.dtsi
> @@ -16,7 +16,10 @@
>  			#size-cells = <1>;
>  
>  			assigned-clocks	= <&clk_s_d2_quadfs 0>,
> -					  <&clk_s_d2_quadfs 0>,
> +					  <&clk_s_d2_quadfs 1>,
> +					  <&clk_s_c0_pll1 0>,
> +					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> +					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
>  					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
>  					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
>  					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
> @@ -26,14 +29,21 @@
>  
>  			assigned-clock-parents = <0>,
>  						 <0>,
> +						 <0>,
> +						 <&clk_s_c0_pll1 0>,
> +						 <&clk_s_c0_pll1 0>,
>  						 <&clk_s_d2_quadfs 0>,
> -						 <&clk_s_d2_quadfs 0>,
> +						 <&clk_s_d2_quadfs 1>,
>  						 <&clk_s_d2_quadfs 0>,
>  						 <&clk_s_d2_quadfs 0>,
>  						 <&clk_s_d2_quadfs 0>,
>  						 <&clk_s_d2_quadfs 0>;
>  
> -			assigned-clock-rates = <297000000>, <297000000>;
> +			assigned-clock-rates = <297000000>,
> +					       <108000000>,
> +					       <0>,
> +					       <400000000>,
> +					       <400000000>;
>  
>  			ranges;
>  
> 
Hi Gabriel

Applied on STi tree for v4.9

Thanks

[PATCH v3 14/14] ARM: DT: STi: STiH410: clock configuration to address 720p and 1080p

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

It is necessary to properly configure these clocks in order
to address 720p and 1080p HDMI resolution.

Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih410.dtsi | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 18ed1ad..7eec729 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -103,7 +103,10 @@
 			#size-cells = <1>;
 
 			assigned-clocks	= <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
@@ -113,14 +116,21 @@
 
 			assigned-clock-parents = <0>,
 						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
 						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>;
 
-			assigned-clock-rates = <297000000>, <297000000>;
+			assigned-clock-rates = <297000000>,
+					       <108000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
 
 			ranges;
 
-- 
1.9.1

Re: [PATCH v3 14/14] ARM: DT: STi: STiH410: clock configuration to address 720p and 1080p

[Patrice Chotard]

On 08/29/2016 02:27 PM, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> It is necessary to properly configure these clocks in order
> to address 720p and 1080p HDMI resolution.
> 
> Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  arch/arm/boot/dts/stih410.dtsi | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index 18ed1ad..7eec729 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -103,7 +103,10 @@
>  			#size-cells = <1>;
>  
>  			assigned-clocks	= <&clk_s_d2_quadfs 0>,
> -					  <&clk_s_d2_quadfs 0>,
> +					  <&clk_s_d2_quadfs 1>,
> +					  <&clk_s_c0_pll1 0>,
> +					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> +					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
>  					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
>  					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
>  					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
> @@ -113,14 +116,21 @@
>  
>  			assigned-clock-parents = <0>,
>  						 <0>,
> +						 <0>,
> +						 <&clk_s_c0_pll1 0>,
> +						 <&clk_s_c0_pll1 0>,
>  						 <&clk_s_d2_quadfs 0>,
> -						 <&clk_s_d2_quadfs 0>,
> +						 <&clk_s_d2_quadfs 1>,
>  						 <&clk_s_d2_quadfs 0>,
>  						 <&clk_s_d2_quadfs 0>,
>  						 <&clk_s_d2_quadfs 0>,
>  						 <&clk_s_d2_quadfs 0>;
>  
> -			assigned-clock-rates = <297000000>, <297000000>;
> +			assigned-clock-rates = <297000000>,
> +					       <108000000>,
> +					       <0>,
> +					       <400000000>,
> +					       <400000000>;
>  
>  			ranges;
>  
> 
Hi Gabriel

Applied on STi tree for v4.9

Thanks

Re: [PATCH v3 00/14] Clock improvement for video playback

[Patrice Chotard]

Hi Gabriel

For the whole series

Acked-by: Patrice Chotard <patrice.chotard@st.com>

Thanks



On 08/29/2016 02:26 PM, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>
> v3:
>   - Rebase to v4.8-rc1
>   - Tipo fix in st,clkgen-pll.txt
>   - Add Ack of Peter for the series
>   - Add missed patch: "ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms"
>
> v2:
>   - Simpliflication of clock binding
>     remark from Rob https://lkml.org/lkml/2016/5/25/492
>   - Suppression of stih415-416 support for the clocks (in order
> 	to help simplification of clock binding)
>     (others patchs for the machine and drivers will come)
>
> This serie allows to increase video resolutions and make audio
> adjustment during a video playback.
>
> Gabriel Fernandez (14):
>   drivers: clk: st: Remove stih415-416 clock support
>   drivers: clk: st: Simplify clock binding of STiH4xx platforms
>   ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms
>   drivers: clk: st: Add fs660c32 synthesizer algorithm
>   drivers: clk: st: Add clock propagation for audio clocks
>   drivers: clk: st: Handle clk synchronous mode for video clocks
>   ARM: DT: STiH407: Enable clock propagation for audio clocks
>   ARM: DT: STiH410: Enable clock propagation for audio clocks
>   ARM: DT: STiH418: Enable clock propagation for audio clocks
>   ARM: DT: STiH407: Enable synchronous clock mode for video clocks
>   ARM: DT: STiH410: Enable synchronous clock mode for video clocks
>   ARM: DT: STiH418: Enable synchronous clock mode for video clocks
>   ARM: DT: STi: STiH407: clock configuration to address 720p and 1080p
>   ARM: DT: STi: STiH410: clock configuration to address 720p and 1080p
>
>  .../bindings/clock/st/st,clkgen-divmux.txt         |  49 --
>  .../devicetree/bindings/clock/st/st,clkgen-mux.txt |  20 +-
>  .../devicetree/bindings/clock/st/st,clkgen-pll.txt |  35 +-
>  .../bindings/clock/st/st,clkgen-prediv.txt         |  36 -
>  .../devicetree/bindings/clock/st/st,clkgen-vcc.txt |  61 --
>  .../devicetree/bindings/clock/st/st,clkgen.txt     |  54 +-
>  .../devicetree/bindings/clock/st/st,flexgen.txt    |   4 +
>  .../devicetree/bindings/clock/st/st,quadfs.txt     |  31 +-
>  arch/arm/boot/dts/stih407-clock.dtsi               |  22 +-
>  arch/arm/boot/dts/stih407.dtsi                     |  16 +-
>  arch/arm/boot/dts/stih410-clock.dtsi               |  20 +-
>  arch/arm/boot/dts/stih410.dtsi                     |  16 +-
>  arch/arm/boot/dts/stih418-clock.dtsi               |  20 +-
>  drivers/clk/st/clk-flexgen.c                       |  63 +-
>  drivers/clk/st/clkgen-fsyn.c                       | 481 ++++---------
>  drivers/clk/st/clkgen-mux.c                        | 748 +--------------------
>  drivers/clk/st/clkgen-pll.c                        | 472 +------------
>  17 files changed, 323 insertions(+), 1825 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
>  delete mode 100644 Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
>  delete mode 100644 Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
>

Re: [PATCH v3 00/14] Clock improvement for video playback

[Stephen Boyd]

On 08/29, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> v3:
>   - Rebase to v4.8-rc1
>   - Tipo fix in st,clkgen-pll.txt
>   - Add Ack of Peter for the series
>   - Add missed patch: "ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms"
> 
> v2:
>   - Simpliflication of clock binding
>     remark from Rob https://lkml.org/lkml/2016/5/25/492
>   - Suppression of stih415-416 support for the clocks (in order
> 	to help simplification of clock binding)
>     (others patchs for the machine and drivers will come)
> 
> This serie allows to increase video resolutions and make audio
> adjustment during a video playback.
> 
> Gabriel Fernandez (14):
>   drivers: clk: st: Remove stih415-416 clock support
>   drivers: clk: st: Simplify clock binding of STiH4xx platforms
>   ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms
>   drivers: clk: st: Add fs660c32 synthesizer algorithm
>   drivers: clk: st: Add clock propagation for audio clocks
>   drivers: clk: st: Handle clk synchronous mode for video clocks
>   ARM: DT: STiH407: Enable clock propagation for audio clocks
>   ARM: DT: STiH410: Enable clock propagation for audio clocks
>   ARM: DT: STiH418: Enable clock propagation for audio clocks
>   ARM: DT: STiH407: Enable synchronous clock mode for video clocks
>   ARM: DT: STiH410: Enable synchronous clock mode for video clocks
>   ARM: DT: STiH418: Enable synchronous clock mode for video clocks
>   ARM: DT: STi: STiH407: clock configuration to address 720p and 1080p
>   ARM: DT: STi: STiH410: clock configuration to address 720p and 1080p

The order of patches intermingles clk changes and dts changes.
I'd prefer to not take any patches for dts through the clk tree,
so can those be deferred to an arm-soc PR? Assuming that works,
I'd just pick 1-2, and 4-6 into the clk tree and the rest can go
on top through arm-soc.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v3 00/14] Clock improvement for video playback

[Patrice Chotard]

On 09/14/2016 08:36 PM, Stephen Boyd wrote:
> On 08/29, gabriel.fernandez@st.com wrote:
>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>
>> v3:
>>   - Rebase to v4.8-rc1
>>   - Tipo fix in st,clkgen-pll.txt
>>   - Add Ack of Peter for the series
>>   - Add missed patch: "ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms"
>>
>> v2:
>>   - Simpliflication of clock binding
>>     remark from Rob https://lkml.org/lkml/2016/5/25/492
>>   - Suppression of stih415-416 support for the clocks (in order
>> 	to help simplification of clock binding)
>>     (others patchs for the machine and drivers will come)
>>
>> This serie allows to increase video resolutions and make audio
>> adjustment during a video playback.
>>
>> Gabriel Fernandez (14):
>>   drivers: clk: st: Remove stih415-416 clock support
>>   drivers: clk: st: Simplify clock binding of STiH4xx platforms
>>   ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms
>>   drivers: clk: st: Add fs660c32 synthesizer algorithm
>>   drivers: clk: st: Add clock propagation for audio clocks
>>   drivers: clk: st: Handle clk synchronous mode for video clocks
>>   ARM: DT: STiH407: Enable clock propagation for audio clocks
>>   ARM: DT: STiH410: Enable clock propagation for audio clocks
>>   ARM: DT: STiH418: Enable clock propagation for audio clocks
>>   ARM: DT: STiH407: Enable synchronous clock mode for video clocks
>>   ARM: DT: STiH410: Enable synchronous clock mode for video clocks
>>   ARM: DT: STiH418: Enable synchronous clock mode for video clocks
>>   ARM: DT: STi: STiH407: clock configuration to address 720p and 1080p
>>   ARM: DT: STi: STiH410: clock configuration to address 720p and 1080p
> 

Hi Stephen

> The order of patches intermingles clk changes and dts changes.
> I'd prefer to not take any patches for dts through the clk tree,
> so can those be deferred to an arm-soc PR? 

No problem, i will take all DTS patches and submit a pull request to arm-soc.

Assuming that works,
> I'd just pick 1-2, and 4-6 into the clk tree and the rest can go
> on top through arm-soc.
> 

Perfect 

Thanks

Re: [PATCH v3 00/14] Clock improvement for video playback

[Patrice Chotard]

On 09/15/2016 08:57 AM, Patrice Chotard wrote:
> 
> 
> On 09/14/2016 08:36 PM, Stephen Boyd wrote:
>> On 08/29, gabriel.fernandez@st.com wrote:
>>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>>
>>> v3:
>>>   - Rebase to v4.8-rc1
>>>   - Tipo fix in st,clkgen-pll.txt
>>>   - Add Ack of Peter for the series
>>>   - Add missed patch: "ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms"
>>>
>>> v2:
>>>   - Simpliflication of clock binding
>>>     remark from Rob https://lkml.org/lkml/2016/5/25/492
>>>   - Suppression of stih415-416 support for the clocks (in order
>>> 	to help simplification of clock binding)
>>>     (others patchs for the machine and drivers will come)
>>>
>>> This serie allows to increase video resolutions and make audio
>>> adjustment during a video playback.
>>>
>>> Gabriel Fernandez (14):
>>>   drivers: clk: st: Remove stih415-416 clock support
>>>   drivers: clk: st: Simplify clock binding of STiH4xx platforms
>>>   ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms
>>>   drivers: clk: st: Add fs660c32 synthesizer algorithm
>>>   drivers: clk: st: Add clock propagation for audio clocks
>>>   drivers: clk: st: Handle clk synchronous mode for video clocks
>>>   ARM: DT: STiH407: Enable clock propagation for audio clocks
>>>   ARM: DT: STiH410: Enable clock propagation for audio clocks
>>>   ARM: DT: STiH418: Enable clock propagation for audio clocks
>>>   ARM: DT: STiH407: Enable synchronous clock mode for video clocks
>>>   ARM: DT: STiH410: Enable synchronous clock mode for video clocks
>>>   ARM: DT: STiH418: Enable synchronous clock mode for video clocks
>>>   ARM: DT: STi: STiH407: clock configuration to address 720p and 1080p
>>>   ARM: DT: STi: STiH410: clock configuration to address 720p and 1080p
>>
> 
> Hi Stephen
> 
>> The order of patches intermingles clk changes and dts changes.
>> I'd prefer to not take any patches for dts through the clk tree,
>> so can those be deferred to an arm-soc PR? 
> 
> No problem, i will take all DTS patches and submit a pull request to arm-soc.
> 
> Assuming that works,
>> I'd just pick 1-2, and 4-6 into the clk tree and the rest can go
>> on top through arm-soc.

Stephen

Just to confirm, these patches will be merged into clk-next tree ? so dedicated for v4.9 ?

Thanks

Patrice

>>
> 
> Perfect 
> 
> Thanks
> 
> 
> 

Re: [PATCH v3 00/14] Clock improvement for video playback

[Gabriel Fernandez]

On 09/14/2016 08:36 PM, Stephen Boyd wrote:
> On 08/29, gabriel.fernandez@st.com wrote:
>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>
>> v3:
>>    - Rebase to v4.8-rc1
>>    - Tipo fix in st,clkgen-pll.txt
>>    - Add Ack of Peter for the series
>>    - Add missed patch: "ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms"
>>
>> v2:
>>    - Simpliflication of clock binding
>>      remark from Rob https://lkml.org/lkml/2016/5/25/492
>>    - Suppression of stih415-416 support for the clocks (in order
>> 	to help simplification of clock binding)
>>      (others patchs for the machine and drivers will come)
>>
>> This serie allows to increase video resolutions and make audio
>> adjustment during a video playback.
>>
>> Gabriel Fernandez (14):
>>    drivers: clk: st: Remove stih415-416 clock support
>>    drivers: clk: st: Simplify clock binding of STiH4xx platforms
>>    ARM: DT: STiH4xx: Simplify clock binding of STiH4xx platforms
>>    drivers: clk: st: Add fs660c32 synthesizer algorithm
>>    drivers: clk: st: Add clock propagation for audio clocks
>>    drivers: clk: st: Handle clk synchronous mode for video clocks
>>    ARM: DT: STiH407: Enable clock propagation for audio clocks
>>    ARM: DT: STiH410: Enable clock propagation for audio clocks
>>    ARM: DT: STiH418: Enable clock propagation for audio clocks
>>    ARM: DT: STiH407: Enable synchronous clock mode for video clocks
>>    ARM: DT: STiH410: Enable synchronous clock mode for video clocks
>>    ARM: DT: STiH418: Enable synchronous clock mode for video clocks
>>    ARM: DT: STi: STiH407: clock configuration to address 720p and 1080p
>>    ARM: DT: STi: STiH410: clock configuration to address 720p and 1080p
> The order of patches intermingles clk changes and dts changes.
> I'd prefer to not take any patches for dts through the clk tree,
> so can those be deferred to an arm-soc PR? Assuming that works,
> I'd just pick 1-2, and 4-6 into the clk tree and the rest can go
> on top through arm-soc.

Hi Stephen,

Many thanks !

BR

Gabriel