[PATCH v4 05/26] staging: iio: tsl2583: remove redundant write to the control register in taos_probe()

[Brian Masney <masneyb@onstation.org>]

taos_probe() calls i2c_smbus_write_byte() to select the control
register, however there are no subsequent calls to
i2c_smbus_read_byte(). The write call is unnecessary and is removed by
this patch.

Verified that the driver still functions correctly using a TSL2581
hooked up to a Raspberry Pi 2.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
 drivers/staging/iio/light/tsl2583.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
index 5a32102..449506b 100644
--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -788,14 +788,6 @@ static int taos_probe(struct i2c_client *clientp,
 		return -EINVAL;
 	}
 
-	ret = i2c_smbus_write_byte(clientp, (TSL258X_CMD_REG | TSL258X_CNTRL));
-	if (ret < 0) {
-		dev_err(&clientp->dev,
-			"i2c_smbus_write_byte() to cmd reg failed in taos_probe(), err = %d\n",
-			ret);
-		return ret;
-	}
-
 	indio_dev->info = &tsl2583_info;
 	indio_dev->channels = tsl2583_channels;
 	indio_dev->num_channels = ARRAY_SIZE(tsl2583_channels);
-- 
2.7.4