[PATCH v5 0/9] mux controller abstraction and iio/i2c muxes

[PATCH v5 0/9] mux controller abstraction and iio/i2c muxes

[Peter Rosin]

Hi!

v4 -> v5 changes
- remove support for fancier dt layouts and go back to the phandle
  approach from v2 and before, killing the horrible non-working
  refcounting crap from v4 and avoiding a bunch of life-time issues
  in v3.
- introduce the concept of a mux-chip, that can hold one or more
  mux-controllers (inspired by the pwm subsystem).
- add dt #mux-control-cells property needed to get to the desired
  mux controller if a mux chip provides more than one.
- take away the option to build the mux-core as a module.
- if the mux controller has an idle state, make sure the mux controller
  is set up in the idle state initially (when it should be idle).
- do not use a variable length array on the stack in mux_gpio_set to
  temporarily store the gpio state, preallocate space instead.
- fix resource leak on one failure path in mux_gpio_probe.
- driver for Analog Devices ADG792A/G, literally the first mux chip
  I found on the Internet with an i2c interface (that was not a
  dedicated i2c multiplexer like PCA9547) which I used to verify
  that the abstractions in the mux core are up to the task. Untested,
  just proof of concept that at least looks pretty and compiles...
- various touch-ups.

v3 -> v4 changes
- rebased onto next-20161122 (depends on recent _available iio changes).
- added support for having the mux-controller in a child node of a
  mux-consumer if it is a sole consumer, to hopefully even further satisfy
  the complaint from Rob (and later Lars-Peter) about dt complexity.
- the above came at the cost of some rather horrible refcounting code,
  please review and suggest how it should be done...
- changed to register a device class instead of a bus.
- pass in the parent device into mux_control_alloc and require less
  work from mux-control drivers.
- changed device names from mux:control%d to mux%d
- move kernel-doc from mux-core.c to mux.h (and add some bits).
- give the gpio driver a chance to update all mux pins at once.
- factor out iio ext_info lookup into new helper function. /Lars-Peter
- use an unsigned type for the iio ext_info count. /Lars-Peter
- unified "brag strings" in the file headers.

v2 -> v3 changes
- have the mux-controller in the parent node of any mux-controller consumer,
  to hopefully satisfy complaint from Rob about dt complexity.
- improve commit message of the mux subsystem commit, making it more
  general, as requested by Jonathan.
- remove priv member from struct mux_control and calculate it on the
  fly. /Jonathan
- make the function comments in mux-core.c kernel doc. /Jonathan
- add devm_mux_control_* to Documentation/driver.model/devres.txt. /Jonathan
- add common dt bindings for mux-controllers, refer to them from the
  mux-gpio bindings. /Rob
- clarify how the gpio pins map to the mux state. /Rob
- separate CONFIG_ variables for the mux core and the mux gpio driver.
- improve Kconfig help texts.
- make CONFIG_MUX_GPIO depend on CONFIG_GPIOLIB.
- keep track of the number of mux states in the mux core.
- since the iio channel number is used as mux state, it was possible
  to drop the state member from the mux_child struct.
- cleanup dt bindings for i2c-mux-simple, it had some of copy-paste
  problems from ots origin (i2c-mux-gpio).
- select the mux control subsystem in config for the i2c-mux-simple driver.
- add entries to MAINTAINERS and my sign-off, I'm now satisfied and know
  nothing in this to be ashamed of.

v1 -> v2 changes
- fixup export of mux_control_put reported by kbuild
- drop devicetree iio-ext-info property as noted by Lars-Peter,
  and replace the functionality by exposing all ext_info
  attributes of the parent channel for each of the muxed
  channels. A cache on top of that and each muxed channel
  gets its own view of the ext_info of the parent channel.
- implement idle-state for muxes
- clear out the cache on failure in order to force a mux
  update on the following use
- cleanup the probe of i2c-mux-simple driver
- fix a bug in the i2c-mux-simple driver, where failure in
  the selection of the mux caused a deadlock when the mux
  was later unconditionally deselected.

I have a piece of hardware that is using the same 3 GPIO pins
to control four 8-way muxes. Three of them control ADC lines
to an ADS1015 chip with an iio driver, and the last one
controls the SDA line of an i2c bus. We have some deployed
code to handle this, but you do not want to see it or ever
hear about it. I'm not sure why I even mention it. Anyway,
the situation has nagged me to no end for quite some time.

So, after first getting more intimate with the i2c muxing code
and later discovering the drivers/iio/inkern.c file and
writing a couple of drivers making use of it, I came up with
what I think is an acceptable solution; add a generic mux
controller driver (and subsystem) that is shared between all
instances, and combine that with an iio mux driver and a new
generic i2c mux driver. The new i2c mux I called "simple"
since it is only hooking the i2c muxing and the new mux
controller (much like the alsa simple card driver does for ASoC).

One thing that I would like to do, but don't see a solution
for, is to move the mux control code that is present in
various drivers in drivers/i2c/muxes to this new minimalistic
muxing subsystem, thus converting all present i2c muxes (but
perhaps not gates and arbitrators) to be i2c-mux-simple muxes.

I'm using an rwsem to lock a mux, but that isn't really a
perfect fit. Is there a better locking primitive that I don't
know about that fits better? I had a mutex at one point, but
that didn't allow any concurrent accesses at all. At least
the rwsem allows concurrent access as long as all users
agree on the mux state, but I suspect that the rwsem will
degrade to the mutex situation pretty quickly if there is
any contention.

Also, the "mux" name feels a bit ambitious, there are many muxes
in the world, and this tiny bit of code is probably not good
enough to be a nice fit for all...

Cheers,
Peter

Peter Rosin (9):
  dt-bindings: document devicetree bindings for mux-controllers and
    mux-gpio
  misc: minimal mux subsystem and gpio-based mux controller
  iio: inkern: api for manipulating ext_info of iio channels
  dt-bindings: iio: iio-mux: document iio-mux bindings
  iio: multiplexer: new iio category and iio-mux driver
  dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
  i2c: i2c-mux-simple: new driver
  dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G
    mux
  misc: mux-adg792a: add mux controller driver for ADG792A/G

 .../devicetree/bindings/i2c/i2c-mux-simple.txt     |  81 ++++
 .../bindings/iio/multiplexer/iio-mux.txt           |  51 +++
 .../devicetree/bindings/misc/mux-adg792a.txt       |  82 ++++
 .../devicetree/bindings/misc/mux-controller.txt    | 153 +++++++
 .../devicetree/bindings/misc/mux-gpio.txt          |  85 ++++
 Documentation/driver-model/devres.txt              |   6 +-
 MAINTAINERS                                        |  14 +
 drivers/i2c/muxes/Kconfig                          |  13 +
 drivers/i2c/muxes/Makefile                         |   1 +
 drivers/i2c/muxes/i2c-mux-simple.c                 | 179 ++++++++
 drivers/iio/Kconfig                                |   1 +
 drivers/iio/Makefile                               |   1 +
 drivers/iio/inkern.c                               |  60 +++
 drivers/iio/multiplexer/Kconfig                    |  18 +
 drivers/iio/multiplexer/Makefile                   |   6 +
 drivers/iio/multiplexer/iio-mux.c                  | 457 +++++++++++++++++++++
 drivers/misc/Kconfig                               |  42 ++
 drivers/misc/Makefile                              |   3 +
 drivers/misc/mux-adg792a.c                         | 154 +++++++
 drivers/misc/mux-core.c                            | 311 ++++++++++++++
 drivers/misc/mux-gpio.c                            | 138 +++++++
 include/linux/iio/consumer.h                       |  37 ++
 include/linux/mux.h                                | 197 +++++++++
 23 files changed, 2089 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-simple.txt
 create mode 100644 Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
 create mode 100644 Documentation/devicetree/bindings/misc/mux-adg792a.txt
 create mode 100644 Documentation/devicetree/bindings/misc/mux-controller.txt
 create mode 100644 Documentation/devicetree/bindings/misc/mux-gpio.txt
 create mode 100644 drivers/i2c/muxes/i2c-mux-simple.c
 create mode 100644 drivers/iio/multiplexer/Kconfig
 create mode 100644 drivers/iio/multiplexer/Makefile
 create mode 100644 drivers/iio/multiplexer/iio-mux.c
 create mode 100644 drivers/misc/mux-adg792a.c
 create mode 100644 drivers/misc/mux-core.c
 create mode 100644 drivers/misc/mux-gpio.c
 create mode 100644 include/linux/mux.h

-- 
2.1.4

[PATCH v5 1/9] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio

[Peter Rosin]

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 .../devicetree/bindings/misc/mux-controller.txt    | 153 +++++++++++++++++++++
 .../devicetree/bindings/misc/mux-gpio.txt          |  85 ++++++++++++
 MAINTAINERS                                        |   5 +
 3 files changed, 243 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/mux-controller.txt
 create mode 100644 Documentation/devicetree/bindings/misc/mux-gpio.txt

diff --git a/Documentation/devicetree/bindings/misc/mux-controller.txt b/Documentation/devicetree/bindings/misc/mux-controller.txt
new file mode 100644
index 000000000000..7957b8bd1278
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mux-controller.txt
@@ -0,0 +1,153 @@
+Common multiplexer controller bindings
+======================================
+
+A multiplexer (or mux) controller will have one, or several, consumer devices
+that uses the mux controller. Thus, a mux controller can possibly control
+several parallel multiplexers, presumably there will be at least one
+multiplexer needed by each consumer..
+
+A mux controller provides a number of states to its consumers, and the state
+space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
+0-7 for an 8-way multiplexer, etc.
+
+
+Consumers
+---------
+
+Mux controller consumers should specify a list of mux controllers that they
+want to use with a property containing a 'mux-ctrl-list':
+
+	mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
+	single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier]
+	mux-ctrl-phandle : phandle to mux controller node
+	mux-ctrl-specifier : array of #mux-control-cells specifying the
+			     given mux controller (controller specific)
+
+Mux controller properties should be named "mux-controls". The exact meaning of
+each mux controller property must be documented in the device tree binding for
+each consumer. An optional property "mux-control-names" may contain a list of
+strings to label each of the mux controllers listed in the "mux-controls"
+property.
+
+Drivers for devices that use more than a single mux controller can use the
+"mux-control-names" property to map the name of the mux controller requested by
+the mux_control_get() call to an index into the list given by the
+"mux-controls" property.
+
+mux-ctrl-specifier typically encodes the chip-relative mux controller number.
+If the mux controller chip only provides a single mux controller, the
+mux-ctrl-specifier can typically be left out.
+
+Example:
+
+	/* One consumer of a 2-way mux controller (one GPIO-line) */
+	mux: mux-controller {
+		compatible = "mux-gpio";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	adc-mux {
+		compatible = "iio-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+		mux-control-names = "adc";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sync-1@0 {
+			reg = <0>;
+		};
+
+		in@1 {
+			reg = <1>;
+		};
+	};
+
+Note that in the example above, specifying the "mux-control-names" is redundant
+because there is only one mux controller in the list.
+
+	/*
+	 * Two consumers (one for an ADC line and one for an i2c bus) of
+	 * parallel 4-way multiplexers controlled by the same two GPIO-lines.
+	 */
+	mux: mux-controller {
+		compatible = "mux-gpio";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	adc-mux {
+		compatible = "iio-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sync-1@0 {
+			reg = <0>;
+		};
+
+		in@1 {
+			reg = <1>;
+		};
+
+		out@2 {
+			reg = <2>;
+		};
+
+		sync-2@3 {
+			reg = <3>;
+		};
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-simple,mux-locked";
+		i2c-parent = <&i2c1>;
+		mux-controls = <&mux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ssd1307: oled@3c {
+				/* ... */
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: pca9555@20 {
+				/* ... */
+			};
+		};
+	};
+
+
+Mux controller nodes
+--------------------
+
+Mux controller nodes must specify the number of cells used for the
+specifier using the '#mux-control-cells' property.
+
+An example mux controller might look like this:
+
+	mux: adg792a@50 {
+		compatible = "adi,adg792a";
+		reg = <0x50>;
+		#mux-control-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/misc/mux-gpio.txt b/Documentation/devicetree/bindings/misc/mux-gpio.txt
new file mode 100644
index 000000000000..6736f8215593
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mux-gpio.txt
@@ -0,0 +1,85 @@
+GPIO-based multiplexer controller bindings
+
+Define what GPIO pins are used to control a multiplexer. Or several
+multiplexers, if the same pins control more than one multiplexer.
+
+Required properties:
+- compatible : "mux-gpio"
+- mux-gpios : list of gpios used to control the multiplexer, least
+	      significant bit first.
+- #mux-control-cells : <0>
+* Standard mux-controller bindings as decribed in mux-controller.txt
+
+Optional properties:
+- idle-state : if present, the state the mux will have when idle.
+
+The multiplexer state is defined as the number represented by the
+multiplexer GPIO pins, where the first pin is the least significant
+bit. An active pin is a binary 1, an inactive pin is a binary 0.
+
+Example:
+
+	mux: mux-controller {
+		compatible = "mux-gpio";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	adc-mux {
+		compatible = "iio-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&mux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sync-1@0 {
+			reg = <0>;
+		};
+
+		in@1 {
+			reg = <1>;
+		};
+
+		out@2 {
+			reg = <2>;
+		};
+
+		sync-2@3 {
+			reg = <3>;
+		};
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-simple,mux-locked";
+		i2c-parent = <&i2c1>;
+
+		mux-controls = <&mux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ssd1307: oled@3c {
+				/* ... */
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: pca9555@20 {
+				/* ... */
+			};
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index d8eb3843dbd4..3d4d0efc2b64 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8403,6 +8403,11 @@ S:	Orphan
 F:	drivers/mmc/host/mmc_spi.c
 F:	include/linux/spi/mmc_spi.h
 
+MULTIPLEXER SUBSYSTEM
+M:	Peter Rosin <peda@axentia.se>
+S:	Maintained
+F:	Documentation/devicetree/bindings/misc/mux-*
+
 MULTISOUND SOUND DRIVER
 M:	Andrew Veliath <andrewtv@usa.net>
 S:	Maintained
-- 
2.1.4

[PATCH v5 2/9] misc: minimal mux subsystem and gpio-based mux controller

[Peter Rosin]

Add a new minimalistic subsystem that handles multiplexer controllers.
When multiplexers are used in various places in the kernel, and the
same multiplexer controller can be used for several independent things,
there should be one place to implement support for said multiplexer
controller.

A single multiplexer controller can also be used to control several
parallel multiplexers, that are in turn used by different subsystems
in the kernel, leading to a need to coordinate multiplexer accesses.
The multiplexer subsystem handles this coordination.

This new mux controller subsystem initially comes with a single backend
driver that controls gpio based multiplexers. Even though not needed by
this initial driver, the mux controller subsystem is prepared to handle
chips with multiple (independent) mux controllers.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 Documentation/driver-model/devres.txt |   6 +-
 MAINTAINERS                           |   2 +
 drivers/misc/Kconfig                  |  30 ++++
 drivers/misc/Makefile                 |   2 +
 drivers/misc/mux-core.c               | 311 ++++++++++++++++++++++++++++++++++
 drivers/misc/mux-gpio.c               | 138 +++++++++++++++
 include/linux/mux.h                   | 197 +++++++++++++++++++++
 7 files changed, 685 insertions(+), 1 deletion(-)
 create mode 100644 drivers/misc/mux-core.c
 create mode 100644 drivers/misc/mux-gpio.c
 create mode 100644 include/linux/mux.h

diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index ca9d1eb46bc0..d64ede85b61b 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -330,7 +330,11 @@ MEM
   devm_kzalloc()
 
 MFD
- devm_mfd_add_devices()
+  devm_mfd_add_devices()
+
+MUX
+  devm_mux_control_get()
+  devm_mux_control_put()
 
 PER-CPU MEM
   devm_alloc_percpu()
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d4d0efc2b64..dc7498682752 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8407,6 +8407,8 @@ MULTIPLEXER SUBSYSTEM
 M:	Peter Rosin <peda@axentia.se>
 S:	Maintained
 F:	Documentation/devicetree/bindings/misc/mux-*
+F:	include/linux/mux.h
+F:	drivers/misc/mux-*
 
 MULTISOUND SOUND DRIVER
 M:	Andrew Veliath <andrewtv@usa.net>
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 64971baf11fa..2ce675e410c5 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -766,6 +766,36 @@ config PANEL_BOOT_MESSAGE
 	  An empty message will only clear the display at driver init time. Any other
 	  printf()-formatted message is valid with newline and escape codes.
 
+menuconfig MULTIPLEXER
+	bool "Multiplexer subsystem"
+	help
+	  Multiplexer controller subsystem. Multiplexers are used in a
+	  variety of settings, and this subsystem abstracts their use
+	  so that the rest of the kernel sees a common interface. When
+	  multiple parallel multiplexers are controlled by one single
+	  multiplexer controller, this subsystem also coordinates the
+	  multiplexer accesses.
+
+	  If unsure, say no.
+
+if MULTIPLEXER
+
+config MUX_GPIO
+	tristate "GPIO-controlled Multiplexer"
+	depends on OF && GPIOLIB
+	help
+	  GPIO-controlled Multiplexer controller.
+
+	  The driver builds a single multiplexer controller using a number
+	  of gpio pins. For N pins, there will be 2^N possible multiplexer
+	  states. The GPIO pins can be connected (by the hardware) to several
+	  multiplexers, which in that case will be operated in parallel.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called mux-gpio.
+
+endif
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 31983366090a..0befa2bba762 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -53,6 +53,8 @@ obj-$(CONFIG_ECHO)		+= echo/
 obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
 obj-$(CONFIG_CXL_BASE)		+= cxl/
 obj-$(CONFIG_PANEL)             += panel.o
+obj-$(CONFIG_MULTIPLEXER)      	+= mux-core.o
+obj-$(CONFIG_MUX_GPIO)		+= mux-gpio.o
 
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_core.o
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_bugs.o
diff --git a/drivers/misc/mux-core.c b/drivers/misc/mux-core.c
new file mode 100644
index 000000000000..cccaa7261a6e
--- /dev/null
+++ b/drivers/misc/mux-core.c
@@ -0,0 +1,311 @@
+/*
+ * Multiplexer subsystem
+ *
+ * Copyright (C) 2016 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "mux-core: " fmt
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/mux.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+static struct class mux_class = {
+	.name = "mux",
+	.owner = THIS_MODULE,
+};
+
+static int __init mux_init(void)
+{
+	return class_register(&mux_class);
+}
+
+static DEFINE_IDA(mux_ida);
+
+static void mux_chip_release(struct device *dev)
+{
+	struct mux_chip *mux_chip = to_mux_chip(dev);
+
+	ida_simple_remove(&mux_ida, mux_chip->id);
+	kfree(mux_chip);
+}
+
+static struct device_type mux_type = {
+	.name = "mux-chip",
+	.release = mux_chip_release,
+};
+
+struct mux_chip *mux_chip_alloc(struct device *dev,
+				unsigned int controllers, size_t sizeof_priv)
+{
+	struct mux_chip *mux_chip;
+	int i;
+
+	if (!dev || !controllers)
+		return NULL;
+
+	mux_chip = kzalloc(sizeof(*mux_chip) +
+			   controllers * sizeof(*mux_chip->mux) +
+			   sizeof_priv, GFP_KERNEL);
+	if (!mux_chip)
+		return NULL;
+
+	mux_chip->mux = (struct mux_control *)(mux_chip + 1);
+	mux_chip->dev.class = &mux_class;
+	mux_chip->dev.type = &mux_type;
+	mux_chip->dev.parent = dev;
+	mux_chip->dev.of_node = dev->of_node;
+	dev_set_drvdata(&mux_chip->dev, mux_chip);
+
+	mux_chip->id = ida_simple_get(&mux_ida, 0, 0, GFP_KERNEL);
+	if (mux_chip->id < 0) {
+		pr_err("muxchipX failed to get a device id\n");
+		kfree(mux_chip);
+		return NULL;
+	}
+	dev_set_name(&mux_chip->dev, "muxchip%d", mux_chip->id);
+
+	mux_chip->controllers = controllers;
+	for (i = 0; i < controllers; ++i) {
+		struct mux_control *mux = &mux_chip->mux[i];
+
+		mux->chip = mux_chip;
+		init_rwsem(&mux->lock);
+		mux->cached_state = -1;
+		mux->idle_state = -1;
+	}
+
+	device_initialize(&mux_chip->dev);
+
+	return mux_chip;
+}
+EXPORT_SYMBOL_GPL(mux_chip_alloc);
+
+static int mux_control_set(struct mux_control *mux, int state)
+{
+	int ret = mux->chip->ops->set(mux, state);
+
+	mux->cached_state = ret < 0 ? -1 : state;
+
+	return ret;
+}
+
+int mux_chip_register(struct mux_chip *mux_chip)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < mux_chip->controllers; ++i) {
+		struct mux_control *mux = &mux_chip->mux[i];
+
+		if (mux->idle_state == mux->cached_state)
+			continue;
+
+		ret = mux_control_set(mux, mux->idle_state);
+		if (ret < 0)
+			return ret;
+	}
+
+	return device_add(&mux_chip->dev);
+}
+EXPORT_SYMBOL_GPL(mux_chip_register);
+
+void mux_chip_unregister(struct mux_chip *mux_chip)
+{
+	device_del(&mux_chip->dev);
+}
+EXPORT_SYMBOL_GPL(mux_chip_unregister);
+
+void mux_chip_free(struct mux_chip *mux_chip)
+{
+	if (!mux_chip)
+		return;
+	put_device(&mux_chip->dev);
+}
+EXPORT_SYMBOL_GPL(mux_chip_free);
+
+int mux_control_select(struct mux_control *mux, int state)
+{
+	int ret;
+
+	if (down_read_trylock(&mux->lock)) {
+		if (mux->cached_state == state)
+			return 0;
+
+		/* Sigh, the mux needs updating... */
+		up_read(&mux->lock);
+	}
+
+	/* ...or it's just contended. */
+	down_write(&mux->lock);
+
+	if (mux->cached_state == state) {
+		/*
+		 * Hmmm, someone else changed the mux to my liking.
+		 * That makes me wonder how long I waited for nothing?
+		 */
+		downgrade_write(&mux->lock);
+		return 0;
+	}
+
+	ret = mux_control_set(mux, state);
+	if (ret < 0) {
+		if (mux->idle_state != -1)
+			mux_control_set(mux, mux->idle_state);
+
+		up_write(&mux->lock);
+		return ret;
+	}
+
+	downgrade_write(&mux->lock);
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(mux_control_select);
+
+int mux_control_deselect(struct mux_control *mux)
+{
+	int ret = 0;
+
+	if (mux->idle_state != -1 && mux->cached_state != mux->idle_state)
+		ret = mux_control_set(mux, mux->idle_state);
+
+	up_read(&mux->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mux_control_deselect);
+
+static int of_dev_node_match(struct device *dev, const void *data)
+{
+	return dev->of_node == data;
+}
+
+static struct mux_chip *of_find_mux_chip_by_node(struct device_node *np)
+{
+	struct device *dev;
+
+	dev = class_find_device(&mux_class, NULL, np, of_dev_node_match);
+
+	return dev ? to_mux_chip(dev) : NULL;
+}
+
+struct mux_control *mux_control_get(struct device *dev, const char *mux_name)
+{
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args args;
+	struct mux_chip *mux_chip;
+	unsigned int controller;
+	int index = 0;
+	int ret;
+
+	if (mux_name) {
+		index = of_property_match_string(np, "mux-control-names",
+						 mux_name);
+		if (index < 0)
+			return ERR_PTR(index);
+	}
+
+	ret = of_parse_phandle_with_args(np,
+					 "mux-controls", "#mux-control-cells",
+					 index, &args);
+	if (ret) {
+		dev_err(dev, "%s: failed to get mux-control %s(%i)\n",
+			np->full_name, mux_name ?: "", index);
+		return ERR_PTR(ret);
+	}
+
+	mux_chip = of_find_mux_chip_by_node(args.np);
+	of_node_put(args.np);
+	if (!mux_chip)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	if (args.args_count > 1 ||
+	    (!args.args_count && (mux_chip->controllers > 1))) {
+		dev_err(dev, "%s: wrong #mux-control-cells for %s\n",
+			np->full_name, args.np->full_name);
+		return ERR_PTR(-EINVAL);
+	}
+
+	controller = 0;
+	if (args.args_count)
+		controller = args.args[0];
+
+	if (controller >= mux_chip->controllers)
+		return ERR_PTR(-EINVAL);
+
+	get_device(&mux_chip->dev);
+	return &mux_chip->mux[controller];
+}
+EXPORT_SYMBOL_GPL(mux_control_get);
+
+void mux_control_put(struct mux_control *mux)
+{
+	put_device(&mux->chip->dev);
+}
+EXPORT_SYMBOL_GPL(mux_control_put);
+
+static void devm_mux_control_release(struct device *dev, void *res)
+{
+	struct mux_control *mux = *(struct mux_control **)res;
+
+	mux_control_put(mux);
+}
+
+struct mux_control *devm_mux_control_get(struct device *dev,
+					 const char *mux_name)
+{
+	struct mux_control **ptr, *mux;
+
+	ptr = devres_alloc(devm_mux_control_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	mux = mux_control_get(dev, mux_name);
+	if (IS_ERR(mux)) {
+		devres_free(ptr);
+		return mux;
+	}
+
+	*ptr = mux;
+	devres_add(dev, ptr);
+
+	return mux;
+}
+EXPORT_SYMBOL_GPL(devm_mux_control_get);
+
+static int devm_mux_control_match(struct device *dev, void *res, void *data)
+{
+	struct mux_control **r = res;
+
+	if (!r || !*r) {
+		WARN_ON(!r || !*r);
+		return 0;
+	}
+
+	return *r == data;
+}
+
+void devm_mux_control_put(struct device *dev, struct mux_control *mux)
+{
+	WARN_ON(devres_release(dev, devm_mux_control_release,
+			       devm_mux_control_match, mux));
+}
+EXPORT_SYMBOL_GPL(devm_mux_control_put);
+
+subsys_initcall(mux_init);
+
+MODULE_DESCRIPTION("Multiplexer subsystem");
+MODULE_AUTHOR("Peter Rosin <peda@axentia.se");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/mux-gpio.c b/drivers/misc/mux-gpio.c
new file mode 100644
index 000000000000..b50d6b871895
--- /dev/null
+++ b/drivers/misc/mux-gpio.c
@@ -0,0 +1,138 @@
+/*
+ * GPIO-controlled multiplexer driver
+ *
+ * Copyright (C) 2016 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/mux.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+struct mux_gpio {
+	struct gpio_descs *gpios;
+	int *val;
+};
+
+static int mux_gpio_set(struct mux_control *mux, int state)
+{
+	struct mux_gpio *mux_gpio = mux_chip_priv(mux->chip);
+	int i;
+
+	for (i = 0; i < mux_gpio->gpios->ndescs; i++)
+		mux_gpio->val[i] = (state >> i) & 1;
+
+	gpiod_set_array_value_cansleep(mux_gpio->gpios->ndescs,
+				       mux_gpio->gpios->desc,
+				       mux_gpio->val);
+
+	return 0;
+}
+
+static const struct mux_control_ops mux_gpio_ops = {
+	.set = mux_gpio_set,
+};
+
+static const struct of_device_id mux_gpio_dt_ids[] = {
+	{ .compatible = "mux-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mux_gpio_dt_ids);
+
+static int mux_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct mux_chip *mux_chip;
+	struct mux_gpio *mux_gpio;
+	int pins;
+	u32 idle_state;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	pins = gpiod_count(dev, "mux");
+	if (pins < 0)
+		return pins;
+
+	mux_chip = mux_chip_alloc(dev, 1, sizeof(*mux_gpio) +
+				  pins * sizeof(*mux_gpio->val));
+	if (!mux_chip)
+		return -ENOMEM;
+
+	mux_gpio = mux_chip_priv(mux_chip);
+	mux_gpio->val = (int *)(mux_gpio + 1);
+	mux_chip->ops = &mux_gpio_ops;
+
+	platform_set_drvdata(pdev, mux_chip);
+
+	mux_gpio->gpios = devm_gpiod_get_array(dev, "mux", GPIOD_OUT_LOW);
+	if (IS_ERR(mux_gpio->gpios)) {
+		ret = PTR_ERR(mux_gpio->gpios);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to get gpios\n");
+		goto free_mux_chip;
+	}
+	WARN_ON(pins != mux_gpio->gpios->ndescs);
+	mux_chip->mux->states = 1 << pins;
+
+	ret = of_property_read_u32(np, "idle-state", &idle_state);
+	if (ret >= 0) {
+		if (idle_state >= mux_chip->mux->states) {
+			dev_err(dev, "invalid idle-state %u\n", idle_state);
+			ret = -EINVAL;
+			goto free_mux_chip;
+		}
+
+		mux_chip->mux->idle_state = idle_state;
+	}
+
+	ret = mux_chip_register(mux_chip);
+	if (ret < 0) {
+		dev_err(dev, "failed to register mux-chip\n");
+		goto free_mux_chip;
+	}
+
+	dev_info(dev, "%u-way mux-controller registered\n",
+		 mux_chip->mux->states);
+
+	return 0;
+
+free_mux_chip:
+	mux_chip_free(mux_chip);
+	return ret;
+}
+
+static int mux_gpio_remove(struct platform_device *pdev)
+{
+	struct mux_chip *mux_chip = to_mux_chip(&pdev->dev);
+
+	mux_chip_unregister(mux_chip);
+	mux_chip_free(mux_chip);
+
+	return 0;
+}
+
+static struct platform_driver mux_gpio_driver = {
+	.driver = {
+		.name = "mux-gpio",
+		.of_match_table	= of_match_ptr(mux_gpio_dt_ids),
+	},
+	.probe = mux_gpio_probe,
+	.remove = mux_gpio_remove,
+};
+module_platform_driver(mux_gpio_driver);
+
+MODULE_DESCRIPTION("GPIO-controlled multiplexer driver");
+MODULE_AUTHOR("Peter Rosin <peda@axentia.se");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mux.h b/include/linux/mux.h
new file mode 100644
index 000000000000..d52a651660ff
--- /dev/null
+++ b/include/linux/mux.h
@@ -0,0 +1,197 @@
+/*
+ * mux.h - definitions for the multiplexer interface
+ *
+ * Copyright (C) 2016 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_MUX_H
+#define _LINUX_MUX_H
+
+#include <linux/device.h>
+#include <linux/rwsem.h>
+
+struct mux_chip;
+struct mux_control;
+struct platform_device;
+
+struct mux_control_ops {
+	int (*set)(struct mux_control *mux, int state);
+};
+
+/**
+ * struct mux_control - Represents a mux controller.
+ * @lock:		Protects the mux controller state.
+ * @chip:		The mux chip that is handling this mux controller.
+ * @states:		The number of mux controller states.
+ * @cached_state:	The current mux controller state, or -1 if none.
+ * @idle_state:		The mux controller state to use when inactive, or -1
+ *			for none.
+ */
+struct mux_control {
+	struct rw_semaphore lock; /* protects the state of the mux */
+
+	struct mux_chip *chip;
+
+	unsigned int states;
+	int cached_state;
+	int idle_state;
+};
+
+/**
+ * struct mux_chip -	Represents a chip holding mux controllers.
+ * @controllers:	Number of mux controllers handled by the chip.
+ * @mux:		Array of mux controllers that is handled.
+ * @dev:		Device structure.
+ * @id:			Used to identify the device internally.
+ * @ops:		Mux controller operations.
+ */
+struct mux_chip {
+	unsigned int controllers;
+	struct mux_control *mux;
+	struct device dev;
+	int id;
+
+	const struct mux_control_ops *ops;
+};
+
+#define to_mux_chip(x) container_of((x), struct mux_chip, dev)
+
+/**
+ * mux_chip_priv() - Get the extra memory reserved by mux_chip_alloc().
+ * @mux_chip: The mux-chip to get the private memory from.
+ *
+ * Return: Pointer to the private memory reserved by the allocator.
+ */
+static inline void *mux_chip_priv(struct mux_chip *mux_chip)
+{
+	return mux_chip + 1;
+}
+
+/**
+ * mux_chip_alloc() - Allocate a mux-chip.
+ * @dev: The parent device implementing the mux interface.
+ * @controllers: The number of mux controllers to allocate for this chip.
+ * @sizeof_priv: Size of extra memory area for private use by the caller.
+ *
+ * Return: A pointer to the new mux-chip, NULL on failure.
+ */
+struct mux_chip *mux_chip_alloc(struct device *dev,
+				unsigned int controllers, size_t sizeof_priv);
+
+/**
+ * mux_chip_register() - Register a mux-chip, thus readying the controllers
+ *			 for use.
+ * @mux_chip: The mux-chip to register.
+ *
+ * Do not retry registration of the same mux-chip on failure. You should
+ * instead put it away with mux_chip_free() and allocate a new one, if you
+ * for some reason would like to retry registration.
+ *
+ * Return: Zero on success or a negative errno on error.
+ */
+int mux_chip_register(struct mux_chip *mux_chip);
+
+/**
+ * mux_chip_unregister() - Take the mux-chip off-line.
+ * @mux_chip: The mux-chip to unregister.
+ *
+ * mux_chip_unregister() reverses the effects of mux_chip_register().
+ * But not completely, you should not try to call mux_chip_register()
+ * on a mux-chip that has been registered before.
+ */
+void mux_chip_unregister(struct mux_chip *mux_chip);
+
+/**
+ * mux_chip_free() - Free the mux-chip for good.
+ * @mux_chip: The mux-chip to free.
+ *
+ * mux_chip_free() reverses the effects of mux_chip_alloc().
+ */
+void mux_chip_free(struct mux_chip *mux_chip);
+
+/**
+ * mux_control_select() - Select the given multiplexer state.
+ * @mux: The mux-control to request a change of state from.
+ * @state: The new requested state.
+ *
+ * Make sure to call mux_control_deselect() when the operation is complete and
+ * the mux-control is free for others to use, but do not call
+ * mux_control_deselect() if mux_control_select() fails.
+ *
+ * Return: 0 if the requested state was already active, or 1 it the
+ * mux-control state was changed to the requested state. Or a negavive
+ * errno on error.
+ *
+ * Note that the difference in return value of zero or one is of
+ * questionable value; especially if the mux-control has several independent
+ * consumers, which is something the consumers should perhaps not be making
+ * assumptions about.
+ */
+int mux_control_select(struct mux_control *mux, int state);
+
+/**
+ * mux_control_deselect() - Deselect the previously selected multiplexer state.
+ * @mux: The mux-control to deselect.
+ *
+ * Return: 0 on success and a negative errno on error. An error can only
+ * occur if the mux has an idle state. Note that even if an error occurs, the
+ * mux-control is unlocked for others to access.
+ */
+int mux_control_deselect(struct mux_control *mux);
+
+/**
+ * mux_control_get_index() - Get the index of the given mux controller
+ * @mux: The mux-control to the the index for.
+ *
+ * Return: The index of the mux controller within the mux chip the mux
+ * controller is a part of.
+ */
+static inline unsigned int mux_control_get_index(struct mux_control *mux)
+{
+	return mux - mux->chip->mux;
+}
+
+/**
+ * mux_control_get() - Get the mux-control for a device.
+ * @dev: The device that needs a mux-control.
+ * @mux_name: The name identifying the mux-control.
+ *
+ * Return: A pointer to the mux-control, or an ERR_PTR with a negative errno.
+ */
+struct mux_control *mux_control_get(struct device *dev, const char *mux_name);
+
+/**
+ * mux_control_put() - Put away the mux-control for good.
+ * @mux: The mux-control to put away.
+ *
+ * mux_control_put() reverses the effects of mux_control_get().
+ */
+void mux_control_put(struct mux_control *mux);
+
+/**
+ * devm_mux_control_get() - Get the mux-control for a device, with resource
+ *			    management.
+ * @dev: The device that needs a mux-control.
+ * @mux_name: The name identifying the mux-control.
+ *
+ * Return: Pointer to the mux-control, or an ERR_PTR with a negative errno.
+ */
+struct mux_control *devm_mux_control_get(struct device *dev,
+					 const char *mux_name);
+
+/**
+ * devm_mux_control_put() - Resource-managed version mux_control_put().
+ * @dev: The device that originally got the mux-control.
+ * @mux: The mux-control to put away.
+ *
+ * Note that you do not normally need to call this function.
+ */
+void devm_mux_control_put(struct device *dev, struct mux_control *mux);
+
+#endif /* _LINUX_MUX_H */
-- 
2.1.4

[PATCH v5 3/9] iio: inkern: api for manipulating ext_info of iio channels

[Peter Rosin]

Extend the inkern api with functions for reading and writing ext_info
of iio channels.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 drivers/iio/inkern.c         | 60 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/iio/consumer.h | 37 +++++++++++++++++++++++++++
 2 files changed, 97 insertions(+)

diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index b0f4630a163f..4848b8129e6c 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -863,3 +863,63 @@ int iio_write_channel_raw(struct iio_channel *chan, int val)
 	return ret;
 }
 EXPORT_SYMBOL_GPL(iio_write_channel_raw);
+
+unsigned int iio_get_channel_ext_info_count(struct iio_channel *chan)
+{
+	const struct iio_chan_spec_ext_info *ext_info;
+	unsigned int i = 0;
+
+	if (!chan->channel->ext_info)
+		return i;
+
+	for (ext_info = chan->channel->ext_info; ext_info->name; ext_info++)
+		++i;
+
+	return i;
+}
+EXPORT_SYMBOL_GPL(iio_get_channel_ext_info_count);
+
+static const struct iio_chan_spec_ext_info *iio_lookup_ext_info(
+						const struct iio_channel *chan,
+						const char *attr)
+{
+	const struct iio_chan_spec_ext_info *ext_info;
+
+	if (!chan->channel->ext_info)
+		return NULL;
+
+	for (ext_info = chan->channel->ext_info; ext_info->name; ++ext_info) {
+		if (!strcmp(attr, ext_info->name))
+			return ext_info;
+	}
+
+	return NULL;
+}
+
+ssize_t iio_read_channel_ext_info(struct iio_channel *chan,
+				  const char *attr, char *buf)
+{
+	const struct iio_chan_spec_ext_info *ext_info;
+
+	ext_info = iio_lookup_ext_info(chan, attr);
+	if (!ext_info)
+		return -EINVAL;
+
+	return ext_info->read(chan->indio_dev, ext_info->private,
+			      chan->channel, buf);
+}
+EXPORT_SYMBOL_GPL(iio_read_channel_ext_info);
+
+ssize_t iio_write_channel_ext_info(struct iio_channel *chan, const char *attr,
+				   const char *buf, size_t len)
+{
+	const struct iio_chan_spec_ext_info *ext_info;
+
+	ext_info = iio_lookup_ext_info(chan, attr);
+	if (!ext_info)
+		return -EINVAL;
+
+	return ext_info->write(chan->indio_dev, ext_info->private,
+			       chan->channel, buf, len);
+}
+EXPORT_SYMBOL_GPL(iio_write_channel_ext_info);
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 47eeec3218b5..5e347a9805fd 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -312,4 +312,41 @@ int iio_read_channel_scale(struct iio_channel *chan, int *val,
 int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
 	int *processed, unsigned int scale);
 
+/**
+ * iio_get_channel_ext_info_count() - get number of ext_info attributes
+ *				      connected to the channel.
+ * @chan:		The channel being queried
+ *
+ * Returns the number of ext_info attributes
+ */
+unsigned int iio_get_channel_ext_info_count(struct iio_channel *chan);
+
+/**
+ * iio_read_channel_ext_info() - read ext_info attribute from a given channel
+ * @chan:		The channel being queried.
+ * @attr:		The ext_info attribute to read.
+ * @buf:		Where to store the attribute value. Assumed to hold
+ *			at least PAGE_SIZE bytes.
+ *
+ * Returns the number of bytes written to buf (perhaps w/o zero termination;
+ * it need not even be a string), or an error code.
+ */
+ssize_t iio_read_channel_ext_info(struct iio_channel *chan,
+				  const char *attr, char *buf);
+
+/**
+ * iio_write_channel_ext_info() - write ext_info attribute from a given channel
+ * @chan:		The channel being queried.
+ * @attr:		The ext_info attribute to read.
+ * @buf:		The new attribute value. Strings needs to be zero-
+ *			terminated, but the terminator should not be included
+ *			in the below len.
+ * @len:		The size of the new attribute value.
+ *
+ * Returns the number of accepted bytes, which should be the same as len.
+ * An error code can also be returned.
+ */
+ssize_t iio_write_channel_ext_info(struct iio_channel *chan, const char *attr,
+				   const char *buf, size_t len);
+
 #endif
-- 
2.1.4

[PATCH v5 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings

[Peter Rosin]

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 .../bindings/iio/multiplexer/iio-mux.txt           | 51 ++++++++++++++++++++++
 MAINTAINERS                                        |  6 +++
 2 files changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt

diff --git a/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
new file mode 100644
index 000000000000..403912631dcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
@@ -0,0 +1,51 @@
+IIO multiplexer bindings
+
+If a multiplexer is used to select which hardware signal is fed to
+e.g. an ADC channel, these bindings describe that situation.
+
+Required properties:
+- compatible : "iio-mux"
+- io-channels : Channel node of the parent channel that has multiplexed
+		input.
+- io-channel-names : Should be "parent".
+- #address-cells = <1>;
+- #size-cells = <0>;
+- mux-controls : Mux controller node to use for operating the mux
+
+Required properties for iio-mux child nodes:
+- reg : The multiplexer state as described in ../misc/mux-controller.txt
+
+For each iio-mux child, an iio channel will be created whose number will
+match the mux controller state.
+
+Example:
+	mux: mux-controller {
+		compatible = "mux-gpio";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	adc-mux {
+		compatible = "iio-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux-controls = <&mux>;
+
+		sync@0 {
+			reg = <0>;
+		};
+
+		in@1 {
+			reg = <1>;
+		};
+
+		system-regulator@2 {
+			reg = <2>;
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index dc7498682752..77045ae15865 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6234,6 +6234,12 @@ F:	Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
 F:	Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
 F:	drivers/iio/adc/envelope-detector.c
 
+IIO MULTIPLEXER
+M:	Peter Rosin <peda@axentia.se>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
+
 IIO SUBSYSTEM AND DRIVERS
 M:	Jonathan Cameron <jic23@kernel.org>
 R:	Hartmut Knaack <knaack.h@gmx.de>
-- 
2.1.4

[PATCH v5 5/9] iio: multiplexer: new iio category and iio-mux driver

[Peter Rosin]

When a multiplexer changes how an iio device behaves (for example
by feeding different signals to an ADC), this driver can be used
to create one virtual iio channel for each multiplexer state.

Depends on the generic multiplexer subsystem.

Cache any ext_info values from the parent iio channel, creating a private
copy of the ext_info attributes for each multiplexer state/channel.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 MAINTAINERS                       |   1 +
 drivers/iio/Kconfig               |   1 +
 drivers/iio/Makefile              |   1 +
 drivers/iio/multiplexer/Kconfig   |  18 ++
 drivers/iio/multiplexer/Makefile  |   6 +
 drivers/iio/multiplexer/iio-mux.c | 457 ++++++++++++++++++++++++++++++++++++++
 6 files changed, 484 insertions(+)
 create mode 100644 drivers/iio/multiplexer/Kconfig
 create mode 100644 drivers/iio/multiplexer/Makefile
 create mode 100644 drivers/iio/multiplexer/iio-mux.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 77045ae15865..16490fbd1721 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6239,6 +6239,7 @@ M:	Peter Rosin <peda@axentia.se>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
+F:	drivers/iio/multiplexer/iio-mux.c
 
 IIO SUBSYSTEM AND DRIVERS
 M:	Jonathan Cameron <jic23@kernel.org>
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index a918270d6f54..b3c8c6ef0dff 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -83,6 +83,7 @@ source "drivers/iio/humidity/Kconfig"
 source "drivers/iio/imu/Kconfig"
 source "drivers/iio/light/Kconfig"
 source "drivers/iio/magnetometer/Kconfig"
+source "drivers/iio/multiplexer/Kconfig"
 source "drivers/iio/orientation/Kconfig"
 if IIO_TRIGGER
    source "drivers/iio/trigger/Kconfig"
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index 33fa4026f92c..93c769cd99bf 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -28,6 +28,7 @@ obj-y += humidity/
 obj-y += imu/
 obj-y += light/
 obj-y += magnetometer/
+obj-y += multiplexer/
 obj-y += orientation/
 obj-y += potentiometer/
 obj-y += potentiostat/
diff --git a/drivers/iio/multiplexer/Kconfig b/drivers/iio/multiplexer/Kconfig
new file mode 100644
index 000000000000..70a044510686
--- /dev/null
+++ b/drivers/iio/multiplexer/Kconfig
@@ -0,0 +1,18 @@
+#
+# Multiplexer drivers
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Multiplexers"
+
+config IIO_MUX
+	tristate "IIO multiplexer driver"
+	select MULTIPLEXER
+	depends on OF
+	help
+	  Say yes here to build support for the IIO multiplexer.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called iio-mux.
+
+endmenu
diff --git a/drivers/iio/multiplexer/Makefile b/drivers/iio/multiplexer/Makefile
new file mode 100644
index 000000000000..68be3c4abd07
--- /dev/null
+++ b/drivers/iio/multiplexer/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for industrial I/O multiplexer drivers
+#
+
+# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_IIO_MUX) += iio-mux.o
diff --git a/drivers/iio/multiplexer/iio-mux.c b/drivers/iio/multiplexer/iio-mux.c
new file mode 100644
index 000000000000..3ea4acdb45e2
--- /dev/null
+++ b/drivers/iio/multiplexer/iio-mux.c
@@ -0,0 +1,457 @@
+/*
+ * IIO multiplexer driver
+ *
+ * Copyright (C) 2016 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/mux.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+struct mux_ext_info_cache {
+	char *data;
+	size_t size;
+};
+
+struct mux_child {
+	struct mux_ext_info_cache *ext_info_cache;
+};
+
+struct mux {
+	int cached_state;
+	struct mux_control *control;
+	struct iio_channel *parent;
+	struct iio_dev *indio_dev;
+	struct iio_chan_spec *chan;
+	struct iio_chan_spec_ext_info *ext_info;
+	struct mux_child *child;
+};
+
+static int iio_mux_select(struct mux *mux, int idx)
+{
+	struct mux_child *child = &mux->child[idx];
+	struct iio_chan_spec const *chan = &mux->chan[idx];
+	int ret;
+	int i;
+
+	ret = mux_control_select(mux->control, chan->channel);
+	if (ret < 0) {
+		mux->cached_state = -1;
+		return ret;
+	}
+
+	if (mux->cached_state == chan->channel)
+		return 0;
+
+	if (chan->ext_info) {
+		for (i = 0; chan->ext_info[i].name; ++i) {
+			const char *attr = chan->ext_info[i].name;
+			struct mux_ext_info_cache *cache;
+
+			cache = &child->ext_info_cache[i];
+
+			if (cache->size < 0)
+				continue;
+
+			ret = iio_write_channel_ext_info(mux->parent, attr,
+							 cache->data,
+							 cache->size);
+
+			if (ret < 0) {
+				mux_control_deselect(mux->control);
+				mux->cached_state = -1;
+				return ret;
+			}
+		}
+	}
+	mux->cached_state = chan->channel;
+
+	return 0;
+}
+
+static void iio_mux_deselect(struct mux *mux)
+{
+	mux_control_deselect(mux->control);
+}
+
+static int mux_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	struct mux *mux = iio_priv(indio_dev);
+	int idx = chan - mux->chan;
+	int ret;
+
+	ret = iio_mux_select(mux, idx);
+	if (ret < 0)
+		return ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_read_channel_raw(mux->parent, val);
+		break;
+
+	case IIO_CHAN_INFO_SCALE:
+		ret = iio_read_channel_scale(mux->parent, val, val2);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	iio_mux_deselect(mux);
+
+	return ret;
+}
+
+static int mux_read_avail(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  const int **vals, int *type, int *length,
+			  long mask)
+{
+	struct mux *mux = iio_priv(indio_dev);
+	int idx = chan - mux->chan;
+	int ret;
+
+	ret = iio_mux_select(mux, idx);
+	if (ret < 0)
+		return ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		*type = IIO_VAL_INT;
+		ret = iio_read_avail_channel_raw(mux->parent, vals, length);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	iio_mux_deselect(mux);
+
+	return ret;
+}
+
+static int mux_write_raw(struct iio_dev *indio_dev,
+			 struct iio_chan_spec const *chan,
+			 int val, int val2, long mask)
+{
+	struct mux *mux = iio_priv(indio_dev);
+	int idx = chan - mux->chan;
+	int ret;
+
+	ret = iio_mux_select(mux, idx);
+	if (ret < 0)
+		return ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_write_channel_raw(mux->parent, val);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	iio_mux_deselect(mux);
+
+	return ret;
+}
+
+static const struct iio_info mux_info = {
+	.read_raw = mux_read_raw,
+	.read_avail = mux_read_avail,
+	.write_raw = mux_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static ssize_t mux_read_ext_info(struct iio_dev *indio_dev, uintptr_t private,
+				 struct iio_chan_spec const *chan, char *buf)
+{
+	struct mux *mux = iio_priv(indio_dev);
+	int idx = chan - mux->chan;
+	ssize_t ret;
+
+	ret = iio_mux_select(mux, idx);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_read_channel_ext_info(mux->parent,
+					mux->ext_info[private].name,
+					buf);
+
+	iio_mux_deselect(mux);
+
+	return ret;
+}
+
+static ssize_t mux_write_ext_info(struct iio_dev *indio_dev, uintptr_t private,
+				  struct iio_chan_spec const *chan,
+				  const char *buf, size_t len)
+{
+	struct device *dev = indio_dev->dev.parent;
+	struct mux *mux = iio_priv(indio_dev);
+	int idx = chan - mux->chan;
+	char *new;
+	ssize_t ret;
+
+	ret = iio_mux_select(mux, idx);
+	if (ret < 0)
+		return ret;
+
+	new = devm_kmemdup(dev, buf, len + 1, GFP_KERNEL);
+	if (!new) {
+		iio_mux_deselect(mux);
+		return -ENOMEM;
+	}
+
+	new[len] = 0;
+
+	ret = iio_write_channel_ext_info(mux->parent,
+					 mux->ext_info[private].name,
+					 buf, len);
+	if (ret < 0) {
+		iio_mux_deselect(mux);
+		devm_kfree(dev, new);
+		return ret;
+	}
+
+	devm_kfree(dev, mux->child[idx].ext_info_cache[private].data);
+	mux->child[idx].ext_info_cache[private].data = new;
+	mux->child[idx].ext_info_cache[private].size = len;
+
+	iio_mux_deselect(mux);
+
+	return ret;
+}
+
+static int mux_configure_channel(struct device *dev, struct mux *mux,
+				 struct device_node *child_np, int idx)
+{
+	struct mux_child *child = &mux->child[idx];
+	struct iio_chan_spec *chan = &mux->chan[idx];
+	struct iio_chan_spec const *pchan = mux->parent->channel;
+	u32 state;
+	char *page = NULL;
+	int num_ext_info;
+	int i;
+	int ret;
+
+	chan->indexed = 1;
+	chan->output = pchan->output;
+	chan->datasheet_name = child_np->name;
+	chan->ext_info = mux->ext_info;
+
+	ret = iio_get_channel_type(mux->parent, &chan->type);
+	if (ret < 0) {
+		dev_err(dev, "failed to get parent channel type\n");
+		return ret;
+	}
+
+	if (iio_channel_has_info(pchan, IIO_CHAN_INFO_RAW))
+		chan->info_mask_separate |= BIT(IIO_CHAN_INFO_RAW);
+	if (iio_channel_has_info(pchan, IIO_CHAN_INFO_SCALE))
+		chan->info_mask_separate |= BIT(IIO_CHAN_INFO_SCALE);
+
+	if (iio_channel_has_available(pchan, IIO_CHAN_INFO_RAW))
+		chan->info_mask_separate_available |= BIT(IIO_CHAN_INFO_RAW);
+
+	ret = of_property_read_u32(child_np, "reg", &state);
+	if (ret < 0) {
+		dev_err(dev, "no reg property for node '%s'\n", child_np->name);
+		return ret;
+	}
+
+	if (state >= mux->control->states) {
+		dev_err(dev, "invalid reg %u\n", state);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < idx; ++i) {
+		if (mux->chan[i].channel == state) {
+			dev_err(dev, "double use of reg %u\n", state);
+			return -EINVAL;
+		}
+	}
+
+	chan->channel = state;
+
+	num_ext_info = iio_get_channel_ext_info_count(mux->parent);
+	if (num_ext_info) {
+		page = devm_kzalloc(dev, PAGE_SIZE, GFP_KERNEL);
+		if (!page)
+			return -ENOMEM;
+	}
+	child->ext_info_cache = devm_kzalloc(dev,
+					     sizeof(*child->ext_info_cache) *
+					     num_ext_info, GFP_KERNEL);
+	for (i = 0; i < num_ext_info; ++i) {
+		child->ext_info_cache[i].size = -1;
+
+		if (!pchan->ext_info[i].write)
+			continue;
+		if (!pchan->ext_info[i].read)
+			continue;
+
+		ret = iio_read_channel_ext_info(mux->parent,
+						mux->ext_info[i].name,
+						page);
+		if (ret < 0) {
+			dev_err(dev, "failed to get ext_info '%s'\n",
+				pchan->ext_info[i].name);
+			return ret;
+		}
+		if (ret >= PAGE_SIZE) {
+			dev_err(dev, "too large ext_info '%s'\n",
+				pchan->ext_info[i].name);
+			return -EINVAL;
+		}
+
+		child->ext_info_cache[i].data = devm_kmemdup(dev, page, ret + 1,
+							     GFP_KERNEL);
+		child->ext_info_cache[i].data[ret] = 0;
+		child->ext_info_cache[i].size = ret;
+	}
+
+	if (page)
+		devm_kfree(dev, page);
+
+	return 0;
+}
+
+static int mux_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *child_np;
+	struct iio_dev *indio_dev;
+	struct iio_channel *parent;
+	struct mux *mux;
+	int sizeof_ext_info;
+	int children;
+	int sizeof_priv;
+	int i;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	parent = devm_iio_channel_get(dev, "parent");
+	if (IS_ERR(parent)) {
+		if (PTR_ERR(parent) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get parent channel\n");
+		return PTR_ERR(parent);
+	}
+
+	sizeof_ext_info = iio_get_channel_ext_info_count(parent);
+	if (sizeof_ext_info) {
+		sizeof_ext_info += 1; /* one extra entry for the sentinel */
+		sizeof_ext_info *= sizeof(*mux->ext_info);
+	}
+
+	children = 0;
+	for_each_child_of_node(np, child_np) {
+		if (of_get_property(child_np, "reg", NULL))
+			children++;
+	}
+	if (children <= 0) {
+		dev_err(dev, "not even a single child\n");
+		return -EINVAL;
+	}
+
+	sizeof_priv = sizeof(*mux);
+	sizeof_priv += sizeof(*mux->child) * children;
+	sizeof_priv += sizeof(*mux->chan) * children;
+	sizeof_priv += sizeof_ext_info;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof_priv);
+	if (!indio_dev)
+		return -ENOMEM;
+
+	mux = iio_priv(indio_dev);
+	mux->child = (struct mux_child *)(mux + 1);
+	mux->chan = (struct iio_chan_spec *)(mux->child + children);
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	mux->parent = parent;
+	mux->cached_state = -1;
+
+	indio_dev->name = dev_name(dev);
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &mux_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = mux->chan;
+	indio_dev->num_channels = children;
+	if (sizeof_ext_info) {
+		mux->ext_info = devm_kmemdup(dev,
+					     parent->channel->ext_info,
+					     sizeof_ext_info, GFP_KERNEL);
+		if (!mux->ext_info)
+			return -ENOMEM;
+
+		for (i = 0; mux->ext_info[i].name; ++i) {
+			if (parent->channel->ext_info[i].read)
+				mux->ext_info[i].read = mux_read_ext_info;
+			if (parent->channel->ext_info[i].write)
+				mux->ext_info[i].write = mux_write_ext_info;
+			mux->ext_info[i].private = i;
+		}
+	}
+
+	mux->control = devm_mux_control_get(dev, NULL);
+	if (IS_ERR(mux->control)) {
+		if (PTR_ERR(mux->control) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get control-mux\n");
+		return PTR_ERR(mux->control);
+	}
+
+	i = 0;
+	for_each_child_of_node(np, child_np) {
+		if (!of_get_property(child_np, "reg", NULL))
+			continue;
+
+		ret = mux_configure_channel(dev, mux, child_np, i);
+		if (ret < 0)
+			return ret;
+		i++;
+	}
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret) {
+		dev_err(dev, "failed to register iio device\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mux_match[] = {
+	{ .compatible = "iio-mux" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mux_match);
+
+static struct platform_driver mux_driver = {
+	.probe = mux_probe,
+	.driver = {
+		.name = "iio-mux",
+		.of_match_table = mux_match,
+	},
+};
+module_platform_driver(mux_driver);
+
+MODULE_DESCRIPTION("IIO multiplexer driver");
+MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
+MODULE_LICENSE("GPL v2");
-- 
2.1.4

[PATCH v5 6/9] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings

[Peter Rosin]

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 .../devicetree/bindings/i2c/i2c-mux-simple.txt     | 81 ++++++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-simple.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-simple.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-simple.txt
new file mode 100644
index 000000000000..18e023d52933
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-simple.txt
@@ -0,0 +1,81 @@
+Simple I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses a mux controller
+from the mux subsystem to route the I2C signals.
+
+                                  .-----.  .-----.
+                                  | dev |  | dev |
+    .------------.                '-----'  '-----'
+    | SoC        |                   |        |
+    |            |          .--------+--------'
+    |   .------. |  .------+    child bus A, on MUX value set to 0
+    |   | I2C  |-|--| Mux  |
+    |   '------' |  '--+---+    child bus B, on MUX value set to 1
+    |   .------. |     |    '----------+--------+--------.
+    |   | MUX- | |     |               |        |        |
+    |   | Ctrl |-|-----+            .-----.  .-----.  .-----.
+    |   '------' |                  | dev |  | dev |  | dev |
+    '------------'                  '-----'  '-----'  '-----'
+
+Required properties:
+- compatible: i2c-mux-simple,mux-locked or i2c-mux-simple,parent-locked
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+  port is connected to.
+- mux-controls: The phandle of the mux controller to use for operating the
+  mux.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory. The sub-bus number
+  is also the mux-controller state described in ../misc/mux-controller.txt
+
+For each i2c child node, an I2C child bus will be created. They will
+be numbered based on their order in the device tree.
+
+Whenever an access is made to a device on a child bus, the value set
+in the relevant node's reg property will be set as the state in the
+mux controller.
+
+Example:
+	mux: mux-controller {
+		compatible = "mux-gpio";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-simple,mux-locked";
+		i2c-parent = <&i2c1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux-controls = <&mux>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ssd1307: oled@3c {
+				compatible = "solomon,ssd1307fb-i2c";
+				reg = <0x3c>;
+				pwms = <&pwm 4 3000>;
+				reset-gpios = <&gpio2 7 1>;
+				reset-active-low;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: pca9555@20 {
+				compatible = "nxp,pca9555";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x20>;
+			};
+		};
+	};
-- 
2.1.4

[PATCH v5 7/9] i2c: i2c-mux-simple: new driver

[Peter Rosin]

This is a generic simple i2c mux that uses the generic multiplexer
subsystem to do the muxing.

The user can select if the mux is to be mux-locked and parent-locked
as described in Documentation/i2c/i2c-topology.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 drivers/i2c/muxes/Kconfig          |  13 +++
 drivers/i2c/muxes/Makefile         |   1 +
 drivers/i2c/muxes/i2c-mux-simple.c | 179 +++++++++++++++++++++++++++++++++++++
 3 files changed, 193 insertions(+)
 create mode 100644 drivers/i2c/muxes/i2c-mux-simple.c

diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 10b3d17ae3ea..565921e09a96 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -73,6 +73,19 @@ config I2C_MUX_REG
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-mux-reg.
 
+config I2C_MUX_SIMPLE
+	tristate "Simple I2C multiplexer"
+	select MULTIPLEXER
+	depends on OF
+	help
+	  If you say yes to this option, support will be included for a
+	  simple generic I2C multiplexer. This driver provides access to
+	  I2C busses connected through a MUX, which is controlled
+	  by a generic MUX controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-simple.
+
 config I2C_DEMUX_PINCTRL
 	tristate "pinctrl-based I2C demultiplexer"
 	depends on PINCTRL && OF
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
index 9948fa45037f..6821d95c92a3 100644
--- a/drivers/i2c/muxes/Makefile
+++ b/drivers/i2c/muxes/Makefile
@@ -11,5 +11,6 @@ obj-$(CONFIG_I2C_MUX_PCA9541)	+= i2c-mux-pca9541.o
 obj-$(CONFIG_I2C_MUX_PCA954x)	+= i2c-mux-pca954x.o
 obj-$(CONFIG_I2C_MUX_PINCTRL)	+= i2c-mux-pinctrl.o
 obj-$(CONFIG_I2C_MUX_REG)	+= i2c-mux-reg.o
+obj-$(CONFIG_I2C_MUX_SIMPLE)	+= i2c-mux-simple.o
 
 ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/muxes/i2c-mux-simple.c b/drivers/i2c/muxes/i2c-mux-simple.c
new file mode 100644
index 000000000000..4a03493e1ad7
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-simple.c
@@ -0,0 +1,179 @@
+/*
+ * Generic simple I2C multiplexer
+ *
+ * Copyright (C) 2016 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/mux.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+struct mux {
+	struct mux_control *control;
+
+	bool do_not_deselect;
+};
+
+static int i2c_mux_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mux *mux = i2c_mux_priv(muxc);
+	int ret;
+
+	ret = mux_control_select(mux->control, chan);
+	mux->do_not_deselect = ret < 0;
+
+	return ret;
+}
+
+static int i2c_mux_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mux *mux = i2c_mux_priv(muxc);
+
+	if (mux->do_not_deselect)
+		return 0;
+
+	return mux_control_deselect(mux->control);
+}
+
+static struct i2c_adapter *mux_parent_adapter(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *parent_np;
+	struct i2c_adapter *parent;
+
+	parent_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!parent_np) {
+		dev_err(dev, "Cannot parse i2c-parent\n");
+		return ERR_PTR(-ENODEV);
+	}
+	parent = of_find_i2c_adapter_by_node(parent_np);
+	of_node_put(parent_np);
+	if (!parent)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return parent;
+}
+
+static const struct of_device_id i2c_mux_of_match[] = {
+	{ .compatible = "i2c-mux-simple,parent-locked",
+	  .data = (void *)0, },
+	{ .compatible = "i2c-mux-simple,mux-locked",
+	  .data = (void *)1, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_of_match);
+
+static int i2c_mux_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child;
+	const struct of_device_id *match;
+	struct i2c_mux_core *muxc;
+	struct mux *mux;
+	struct i2c_adapter *parent;
+	int children;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return -ENOMEM;
+
+	mux->control = devm_mux_control_get(dev, NULL);
+	if (IS_ERR(mux->control)) {
+		if (PTR_ERR(mux->control) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get control-mux\n");
+		return PTR_ERR(mux->control);
+	}
+
+	parent = mux_parent_adapter(dev);
+	if (IS_ERR(parent)) {
+		if (PTR_ERR(parent) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get i2c-parent adapter\n");
+		return PTR_ERR(parent);
+	}
+
+	children = of_get_child_count(np);
+
+	muxc = i2c_mux_alloc(parent, dev, children, 0, 0,
+			     i2c_mux_select, i2c_mux_deselect);
+	if (!muxc) {
+		ret = -ENOMEM;
+		goto err_parent;
+	}
+	muxc->priv = mux;
+
+	platform_set_drvdata(pdev, muxc);
+
+	match = of_match_device(of_match_ptr(i2c_mux_of_match), dev);
+	if (match)
+		muxc->mux_locked = !!of_device_get_match_data(dev);
+
+	for_each_child_of_node(np, child) {
+		u32 chan;
+
+		ret = of_property_read_u32(child, "reg", &chan);
+		if (ret < 0) {
+			dev_err(dev, "no reg property for node '%s'\n",
+				child->name);
+			goto err_children;
+		}
+
+		if (chan >= mux->control->states) {
+			dev_err(dev, "invalid reg %u\n", chan);
+			ret = -EINVAL;
+			goto err_children;
+		}
+
+		ret = i2c_mux_add_adapter(muxc, 0, chan, 0);
+		if (ret)
+			goto err_children;
+	}
+
+	dev_info(dev, "%d-port mux on %s adapter\n", children, parent->name);
+
+	return 0;
+
+err_children:
+	i2c_mux_del_adapters(muxc);
+err_parent:
+	i2c_put_adapter(parent);
+
+	return ret;
+}
+
+static int i2c_mux_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	i2c_put_adapter(muxc->parent);
+
+	return 0;
+}
+
+static struct platform_driver i2c_mux_driver = {
+	.probe	= i2c_mux_probe,
+	.remove	= i2c_mux_remove,
+	.driver	= {
+		.name	= "i2c-mux-simple",
+		.of_match_table = i2c_mux_of_match,
+	},
+};
+module_platform_driver(i2c_mux_driver);
+
+MODULE_DESCRIPTION("Simple I2C multiplexer driver");
+MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
+MODULE_LICENSE("GPL v2");
-- 
2.1.4

[PATCH v5 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux

[Peter Rosin]

Analog Devices ADG792A/G is a triple 4:1 mux.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 .../devicetree/bindings/misc/mux-adg792a.txt       | 82 ++++++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/mux-adg792a.txt

diff --git a/Documentation/devicetree/bindings/misc/mux-adg792a.txt b/Documentation/devicetree/bindings/misc/mux-adg792a.txt
new file mode 100644
index 000000000000..8d5c9de09832
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mux-adg792a.txt
@@ -0,0 +1,82 @@
+Bindings for Analog Devices ADG792A/G Triple 4:1 Multiplexers
+
+Required properties:
+- compatible : "adi,adg792a" or "adi,adg792g"
+- #mux-control-cells : <0> if parallel, or <1> if not.
+* Standard mux-controller bindings as decribed in mux-controller.txt
+
+Optional properties:
+- adi,parallel : if present, the three muxes are bound together with a single
+  mux controller, controlling all three muxes in parallel.
+- adi,idle-state : if present, array of states the three mux controllers will
+  have when idle (or, if parallel, a single idle-state).
+
+Mux controller states 0 through 3 correspond to signals A through D in the
+datasheet. Mux controller states 4 and 5 are only available as possible idle
+states. State 4 represents that nothing is connected, and state 5 represents
+that the mux controller keeps the mux in its previously selected state during
+the idle period. State 5 is the default idle state.
+
+Example:
+
+	/* three independent mux controllers (of which one is used) */
+	&i2c0 {
+		mux: adg792a@50 {
+			compatible = "adi,adg792a";
+			reg = <0x50>;
+			#mux-control-cells = <1>;
+		};
+	};
+
+	adc-mux {
+		compatible = "iio-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&mux 1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sync-1@0 {
+			reg = <0>;
+		};
+
+		in@2 {
+			reg = <2>;
+		};
+	};
+
+
+	/*
+	 * Three parallel muxes with one mux controller, useful e.g. if
+	 * the adc is differential, thus needing two signals to be muxed
+	 * simultaneously for correct operation.
+	 */
+	&i2c0 {
+		pmux: adg792a@50 {
+			compatible = "adi,adg792a";
+			reg = <0x50>;
+			#mux-control-cells = <0>;
+			adi,parallel;
+		};
+	};
+
+	diff-adc-mux {
+		compatible = "iio-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&pmux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sync-1@0 {
+			reg = <0>;
+		};
+
+		in@2 {
+			reg = <2>;
+		};
+	};
-- 
2.1.4

[PATCH v5 9/9] misc: mux-adg792a: add mux controller driver for ADG792A/G

[Peter Rosin]

Analog Devices ADG792A/G is a triple 4:1 mux.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 drivers/misc/Kconfig       |  12 ++++
 drivers/misc/Makefile      |   1 +
 drivers/misc/mux-adg792a.c | 154 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 167 insertions(+)
 create mode 100644 drivers/misc/mux-adg792a.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 2ce675e410c5..45567a444bbf 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -780,6 +780,18 @@ menuconfig MULTIPLEXER
 
 if MULTIPLEXER
 
+config MUX_ADG792A
+	tristate "Analog Devices ADG792A/ADG792G Multiplexers"
+	depends on I2C
+	help
+	  ADG792A and ADG792G Wide Bandwidth Triple 4:1 Multiplexers
+
+	  The driver supports both operating the three multiplexers in
+	  parellel and operating them independently.
+
+	  To compile the driver as a module, choose M here: the module will
+	  be called mux-adg792a.
+
 config MUX_GPIO
 	tristate "GPIO-controlled Multiplexer"
 	depends on OF && GPIOLIB
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 0befa2bba762..10ab8d34c9e5 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
 obj-$(CONFIG_CXL_BASE)		+= cxl/
 obj-$(CONFIG_PANEL)             += panel.o
 obj-$(CONFIG_MULTIPLEXER)      	+= mux-core.o
+obj-$(CONFIG_MUX_ADG792A)	+= mux-adg792a.o
 obj-$(CONFIG_MUX_GPIO)		+= mux-gpio.o
 
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_core.o
diff --git a/drivers/misc/mux-adg792a.c b/drivers/misc/mux-adg792a.c
new file mode 100644
index 000000000000..279dcf381695
--- /dev/null
+++ b/drivers/misc/mux-adg792a.c
@@ -0,0 +1,154 @@
+/*
+ * Multiplexer driver for Analog Devices ADG792A/G Triple 4:1 mux
+ *
+ * Copyright (C) 2016 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mux.h>
+
+#define ADG792A_LDSW		BIT(0)
+#define ADG792A_RESET		BIT(1)
+#define ADG792A_DISABLE(mux)	(0x50 | (mux))
+#define ADG792A_DISABLE_ALL	(0x5f)
+#define ADG792A_MUX(mux, state)	(0xc0 | (((mux) + 1) << 2) | (state))
+#define ADG792A_MUX_ALL(state)	(0xc0 | (state))
+
+#define ADG792A_DISABLE_STATE	(4)
+#define ADG792A_KEEP_STATE	(5)
+
+static int adg792a_set(struct mux_control *mux, int state)
+{
+	struct i2c_client *i2c = to_i2c_client(mux->chip->dev.parent);
+	u8 cmd;
+
+	if (mux->chip->controllers == 1) {
+		/* parallel mux controller operation */
+		if (state == ADG792A_DISABLE_STATE)
+			cmd = ADG792A_DISABLE_ALL;
+		else
+			cmd = ADG792A_MUX_ALL(state);
+	} else {
+		unsigned int controller = mux_control_get_index(mux);
+
+		if (state == ADG792A_DISABLE_STATE)
+			cmd = ADG792A_DISABLE(controller);
+		else
+			cmd = ADG792A_MUX(controller, state);
+	}
+
+	return i2c_smbus_write_byte_data(i2c, cmd, ADG792A_LDSW);
+}
+
+static const struct mux_control_ops adg792a_ops = {
+	.set = adg792a_set,
+};
+
+static int adg792a_probe(struct i2c_client *i2c,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c->dev;
+	struct mux_chip *mux_chip;
+	bool parallel;
+	int ret;
+	int i;
+
+	parallel = of_property_read_bool(i2c->dev.of_node, "adi,parallel");
+
+	mux_chip = mux_chip_alloc(dev, parallel ? 1 : 3, 0);
+	if (!mux_chip)
+		return -ENOMEM;
+
+	mux_chip->ops = &adg792a_ops;
+	dev_set_drvdata(dev, mux_chip);
+
+	ret = i2c_smbus_write_byte_data(i2c, ADG792A_DISABLE_ALL,
+					ADG792A_RESET | ADG792A_LDSW);
+	if (ret < 0)
+		goto free_mux_chip;
+
+	for (i = 0; i < mux_chip->controllers; ++i) {
+		struct mux_control *mux = &mux_chip->mux[i];
+		u32 idle_state;
+
+		mux->states = 4;
+
+		ret = of_property_read_u32_index(i2c->dev.of_node,
+						 "adi,idle-state", i,
+						 &idle_state);
+		if (ret >= 0) {
+			if (idle_state > ADG792A_KEEP_STATE) {
+				dev_err(dev, "invalid idle-state %u\n",
+					idle_state);
+				ret = -EINVAL;
+				goto free_mux_chip;
+			}
+			if (idle_state != ADG792A_KEEP_STATE)
+				mux->idle_state = idle_state;
+		}
+	}
+
+	ret = mux_chip_register(mux_chip);
+	if (ret < 0) {
+		dev_err(dev, "failed to register mux-chip\n");
+		goto free_mux_chip;
+	}
+
+	if (parallel)
+		dev_info(dev, "1 triple 4-way mux-controller registered\n");
+	else
+		dev_info(dev, "3 4-way mux-controllers registered\n");
+
+	return 0;
+
+free_mux_chip:
+	mux_chip_free(mux_chip);
+	return ret;
+}
+
+static int adg792a_remove(struct i2c_client *i2c)
+{
+	struct mux_chip *mux_chip = to_mux_chip(&i2c->dev);
+
+	mux_chip_unregister(mux_chip);
+	mux_chip_free(mux_chip);
+
+	return 0;
+}
+
+static const struct i2c_device_id adg792a_id[] = {
+	{ .name = "adg792a", },
+	{ .name = "adg792g", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adg792a_id);
+
+static const struct of_device_id adg792a_of_match[] = {
+	{ .compatible = "adi,adg792a", },
+	{ .compatible = "adi,adg792g", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adg792a_of_match);
+
+static struct i2c_driver adg792a_driver = {
+	.driver		= {
+		.name		= "adg792a",
+		.of_match_table = of_match_ptr(adg792a_of_match),
+	},
+	.probe		= adg792a_probe,
+	.remove		= adg792a_remove,
+	.id_table	= adg792a_id,
+};
+module_i2c_driver(adg792a_driver);
+
+MODULE_DESCRIPTION("Analog Devices ADG792A/G Triple 4:1 mux driver");
+MODULE_AUTHOR("Peter Rosin <peda@axentia.se");
+MODULE_LICENSE("GPL v2");
-- 
2.1.4

Re: [PATCH v5 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings

[Peter Rosin]

On 2016-11-29 11:10, Peter Rosin wrote:
> +Example:
> +	mux: mux-controller {
> +		compatible = "mux-gpio";
> +		#mux-control-cells = <0>;
> +
> +		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
> +			    <&pioA 1 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	adc-mux {
> +		compatible = "iio-mux";
> +		io-channels = <&adc 0>;
> +		io-channel-names = "parent";
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		mux-controls = <&mux>;
> +
> +		sync@0 {
> +			reg = <0>;
> +		};
> +
> +		in@1 {
> +			reg = <1>;
> +		};
> +
> +		system-regulator@2 {
> +			reg = <2>;
> +		};
> +	};

Hmmm, a more compact binding would be to just use an array of strings
instead of a list of children for the mux channels, and use the array
index as channel number, like so:

	adc-mux {
		compatible = "iio-mux";
		io-channels = <&adc 0>;
		io-channel-names = "parent";

		mux-controls = <&mux>;

		channels = "sync", "in", "system-regulator";
	};

If you need to skip a low-number channel, you'd just put an empty string
for that channel. If you need to skip channels at the end, just stop
short.

Can anyone think of any reason to add anything to the channel nodes
that makes the string-array ineffective? If so, or if that comes up
later, it could be optional and in that case you could look for the
channels property first and then, if not present, iterate over child
nodes.

Opinions? I like it, it's a lot more compact...

Cheers,
Peter