[PATCH v2 0/6] mediatek: pwm driver add MT2712/MT7622 support

[PATCH v2 0/6] mediatek: pwm driver add MT2712/MT7622 support

[Zhi Mao]

change in v2:
1. add error check for enable colock control flow
2. use "goto err_clk(main/top)" coding style, for preparing clk error case
3. remove comments inline /*===*/
4. move "PWM_CLK_DIV_MAX" modification to its own patch
5. move pwm source clock selection to its own patch

Zhi Mao (6):
  pwm: kconfig: modify mediatek information
  pwm: mediatek: fix pwm source clock selection
  pwm: mediatek: fix clock control issue
  pwm: bindings: add MT2712/MT7622 information
  pwm: mediatek: add PWM_CLK_DIV_MAX
  pwm: mediatek: add MT2712/MT7622 support

 .../devicetree/bindings/pwm/pwm-mediatek.txt       |    6 +-
 drivers/pwm/Kconfig                                |    2 +-
 drivers/pwm/pwm-mediatek.c                         |  132 ++++++++++++++------
 3 files changed, 103 insertions(+), 37 deletions(-)

[PATCH v2 1/6] pwm: kconfig: modify mediatek information

[Zhi Mao]

modify mediatek information

Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
---
 drivers/pwm/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 313c107..45cdf2a 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -300,7 +300,7 @@ config PWM_MEDIATEK
 	  Generic PWM framework driver for Mediatek ARM SoC.
 
 	  To compile this driver as a module, choose M here: the module
-	  will be called pwm-mxs.
+	  will be called pwm-mediatek.
 
 config PWM_MXS
 	tristate "Freescale MXS PWM support"
-- 
1.7.9.5

[PATCH v2 2/6] pwm: mediatek: fix pwm source clock selection

[Zhi Mao]

In original code, the pwm output frequency is not correct
when set bit<3>=1 to PWMCON register.

Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
---
 drivers/pwm/pwm-mediatek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index 5c11bc7..d08b5b3 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -91,7 +91,7 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (clkdiv > 7)
 		return -EINVAL;
 
-	mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
+	mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | clkdiv);
 	mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
 	mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
 
-- 
1.7.9.5

[PATCH v2 3/6] pwm: mediatek: fix clock control issue

[Zhi Mao]

1. prepare top/main clk in mtk_pwm_probe() function,
   it will increase power consumption
   and in original code these clocks is only prepeare but never enabled
2. pwm clock should be enabled before setting pwm registers
   in function: mtk_pwm_config()
3. delete "pwm_disable" in function:mtk_pwm_remove(),
   as framework should disable all the pwms, before remove them.

Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
---
 drivers/pwm/pwm-mediatek.c |   69 ++++++++++++++++++++++++++++++--------------
 1 file changed, 47 insertions(+), 22 deletions(-)

diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index d08b5b3..554a042 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -2,6 +2,7 @@
  * Mediatek Pulse Width Modulator driver
  *
  * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2017 Zhi Mao <zhi.mao@mediatek.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -61,6 +62,42 @@ static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
 	return container_of(chip, struct mtk_pwm_chip, chip);
 }
 
+static int mtk_pwm_clk_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+	int ret = 0;
+
+	ret = clk_prepare_enable(pc->clks[MTK_CLK_TOP]);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_prepare_enable(pc->clks[MTK_CLK_MAIN]);
+	if (ret < 0)
+		goto disable_clk_top;
+
+	ret = clk_prepare_enable(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	if (ret < 0)
+		goto disable_clk_main;
+
+	return 0;
+
+disable_clk_main:
+	clk_disable_unprepare(pc->clks[MTK_CLK_MAIN]);
+disable_clk_top:
+	clk_disable_unprepare(pc->clks[MTK_CLK_TOP]);
+
+	return ret;
+}
+
+static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+
+	clk_disable_unprepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	clk_disable_unprepare(pc->clks[MTK_CLK_MAIN]);
+	clk_disable_unprepare(pc->clks[MTK_CLK_TOP]);
+}
+
 static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
 				unsigned int offset)
 {
@@ -80,6 +117,11 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
 	struct clk *clk = pc->clks[MTK_CLK_PWM1 + pwm->hwpwm];
 	u32 resolution, clkdiv = 0;
+	int ret;
+
+	ret = mtk_pwm_clk_enable(chip, pwm);
+	if (ret < 0)
+		return ret;
 
 	resolution = NSEC_PER_SEC / clk_get_rate(clk);
 
@@ -95,6 +137,8 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
 	mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
 
+	mtk_pwm_clk_disable(chip, pwm);
+
 	return 0;
 }
 
@@ -104,7 +148,7 @@ static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	u32 value;
 	int ret;
 
-	ret = clk_prepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	ret = mtk_pwm_clk_enable(chip, pwm);
 	if (ret < 0)
 		return ret;
 
@@ -124,7 +168,7 @@ static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	value &= ~BIT(pwm->hwpwm);
 	writel(value, pc->regs);
 
-	clk_unprepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	mtk_pwm_clk_disable(chip, pwm);
 }
 
 static const struct pwm_ops mtk_pwm_ops = {
@@ -156,14 +200,6 @@ static int mtk_pwm_probe(struct platform_device *pdev)
 			return PTR_ERR(pc->clks[i]);
 	}
 
-	ret = clk_prepare(pc->clks[MTK_CLK_TOP]);
-	if (ret < 0)
-		return ret;
-
-	ret = clk_prepare(pc->clks[MTK_CLK_MAIN]);
-	if (ret < 0)
-		goto disable_clk_top;
-
 	platform_set_drvdata(pdev, pc);
 
 	pc->chip.dev = &pdev->dev;
@@ -174,26 +210,15 @@ static int mtk_pwm_probe(struct platform_device *pdev)
 	ret = pwmchip_add(&pc->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
-		goto disable_clk_main;
+		return ret;
 	}
 
 	return 0;
-
-disable_clk_main:
-	clk_unprepare(pc->clks[MTK_CLK_MAIN]);
-disable_clk_top:
-	clk_unprepare(pc->clks[MTK_CLK_TOP]);
-
-	return ret;
 }
 
 static int mtk_pwm_remove(struct platform_device *pdev)
 {
 	struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
-	unsigned int i;
-
-	for (i = 0; i < pc->chip.npwm; i++)
-		pwm_disable(&pc->chip.pwms[i]);
 
 	return pwmchip_remove(&pc->chip);
 }
-- 
1.7.9.5

[PATCH v2 4/6] pwm: bindings: add MT2712/MT7622 information

[Zhi Mao]

add MT2712/MT7622 pwm information

Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
---
 .../devicetree/bindings/pwm/pwm-mediatek.txt       |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
index 54c59b0..ef8bd3c 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
@@ -2,6 +2,8 @@ MediaTek PWM controller
 
 Required properties:
  - compatible: should be "mediatek,<name>-pwm":
+   - "mediatek,mt2712-pwm": found on mt2712 SoC.
+   - "mediatek,mt7622-pwm": found on mt7622 SoC.
    - "mediatek,mt7623-pwm": found on mt7623 SoC.
  - reg: physical base address and length of the controller's registers.
  - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
@@ -10,7 +12,9 @@ Required properties:
  - clock-names: must contain the following:
    - "top": the top clock generator
    - "main": clock used by the PWM core
-   - "pwm1-5": the five per PWM clocks
+   - "pwm1-8": the eight per PWM clocks for mt2712
+   - "pwm1-6": the six per PWM clocks for mt7622
+   - "pwm1-5": the five per PWM clocks for mt7623
  - pinctrl-names: Must contain a "default" entry.
  - pinctrl-0: One property must exist for each entry in pinctrl-names.
    See pinctrl/pinctrl-bindings.txt for details of the property values.
-- 
1.7.9.5

[PATCH v2 5/6] pwm: mediatek: add PWM_CLK_DIV_MAX

[Zhi Mao]

Replace "7" with "PWM_CLK_DIV_MAX" in function:mtk_pwm_config()
to improve the code readablity.

Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
---
 drivers/pwm/pwm-mediatek.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index 554a042..e5f6425 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -30,6 +30,8 @@
 #define PWMDWIDTH		0x2c
 #define PWMTHRES		0x30
 
+#define PWM_CLK_DIV_MAX		7
+
 enum {
 	MTK_CLK_MAIN = 0,
 	MTK_CLK_TOP,
@@ -130,8 +132,10 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		clkdiv++;
 	}
 
-	if (clkdiv > 7)
+	if (clkdiv > PWM_CLK_DIV_MAX) {
+		dev_err(chip->dev, "period %d not supported\n", period_ns);
 		return -EINVAL;
+	}
 
 	mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | clkdiv);
 	mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
-- 
1.7.9.5

[PATCH v2 6/6] pwm: mediatek: add MT2712/MT7622 support

[Zhi Mao]

1. support multiple chip(MT2712, MT7622, MT7623)
2. add mtk_pwm_com_reg for match the registers of MT2712 pwm8
the register offset address of pwm8 for MT2712 is not fixed 0x40
and they are not the same as pwm0~6.

Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
---
 drivers/pwm/pwm-mediatek.c |   55 +++++++++++++++++++++++++++++++++++---------
 1 file changed, 44 insertions(+), 11 deletions(-)

diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index e5f6425..a07ae19 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>
@@ -40,11 +41,19 @@ enum {
 	MTK_CLK_PWM3,
 	MTK_CLK_PWM4,
 	MTK_CLK_PWM5,
+	MTK_CLK_PWM6,
+	MTK_CLK_PWM7,
+	MTK_CLK_PWM8,
 	MTK_CLK_MAX,
 };
 
-static const char * const mtk_pwm_clk_name[] = {
-	"main", "top", "pwm1", "pwm2", "pwm3", "pwm4", "pwm5"
+static const char * const mtk_pwm_clk_name[MTK_CLK_MAX] = {
+	"main", "top", "pwm1", "pwm2", "pwm3", "pwm4",
+	"pwm5", "pwm6", "pwm7", "pwm8"
+};
+
+struct mtk_com_pwm_data {
+	unsigned int pwm_nums;
 };
 
 /**
@@ -57,6 +66,11 @@ struct mtk_pwm_chip {
 	struct pwm_chip chip;
 	void __iomem *regs;
 	struct clk *clks[MTK_CLK_MAX];
+	const struct mtk_com_pwm_data *data;
+};
+
+static const unsigned long mtk_pwm_com_reg[] = {
+	0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
 };
 
 static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
@@ -103,14 +117,14 @@ static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
 				unsigned int offset)
 {
-	return readl(chip->regs + 0x10 + (num * 0x40) + offset);
+	return readl(chip->regs + mtk_pwm_com_reg[num] + offset);
 }
 
 static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
 				  unsigned int num, unsigned int offset,
 				  u32 value)
 {
-	writel(value, chip->regs + 0x10 + (num * 0x40) + offset);
+	writel(value, chip->regs + mtk_pwm_com_reg[num] + offset);
 }
 
 static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -193,23 +207,28 @@ static int mtk_pwm_probe(struct platform_device *pdev)
 	if (!pc)
 		return -ENOMEM;
 
+	pc->data = of_device_get_match_data(&pdev->dev);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pc->regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(pc->regs))
 		return PTR_ERR(pc->regs);
 
-	for (i = 0; i < MTK_CLK_MAX; i++) {
+	for (i = 0; i < pc->data->pwm_nums + 2; i++) {
 		pc->clks[i] = devm_clk_get(&pdev->dev, mtk_pwm_clk_name[i]);
-		if (IS_ERR(pc->clks[i]))
+		if (IS_ERR(pc->clks[i])) {
+			dev_err(&pdev->dev, "[PWM] clock: %s fail: %ld\n",
+				mtk_pwm_clk_name[i], PTR_ERR(pc->clks[i]));
 			return PTR_ERR(pc->clks[i]);
+		}
 	}
 
-	platform_set_drvdata(pdev, pc);
-
 	pc->chip.dev = &pdev->dev;
 	pc->chip.ops = &mtk_pwm_ops;
 	pc->chip.base = -1;
-	pc->chip.npwm = 5;
+	pc->chip.npwm = pc->data->pwm_nums;
+
+	platform_set_drvdata(pdev, pc);
 
 	ret = pwmchip_add(&pc->chip);
 	if (ret < 0) {
@@ -227,9 +246,23 @@ static int mtk_pwm_remove(struct platform_device *pdev)
 	return pwmchip_remove(&pc->chip);
 }
 
+static const struct mtk_com_pwm_data mt2712_pwm_data = {
+	.pwm_nums = 8,
+};
+
+static const struct mtk_com_pwm_data mt7622_pwm_data = {
+	.pwm_nums = 6,
+};
+
+static const struct mtk_com_pwm_data mt7623_pwm_data = {
+	.pwm_nums = 5,
+};
+
 static const struct of_device_id mtk_pwm_of_match[] = {
-	{ .compatible = "mediatek,mt7623-pwm" },
-	{ }
+	{.compatible = "mediatek,mt2712-pwm", .data = &mt2712_pwm_data},
+	{.compatible = "mediatek,mt7622-pwm", .data = &mt7622_pwm_data},
+	{.compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data},
+	{},
 };
 MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
 
-- 
1.7.9.5

Re: [PATCH v2 0/6] mediatek: pwm driver add MT2712/MT7622 support

[John Crispin]

On 23/06/17 07:08, Zhi Mao wrote:
> change in v2:
> 1. add error check for enable colock control flow
> 2. use "goto err_clk(main/top)" coding style, for preparing clk error case
> 3. remove comments inline /*===*/
> 4. move "PWM_CLK_DIV_MAX" modification to its own patch
> 5. move pwm source clock selection to its own patch

Hi,
thanks for updating the series, i will give it a quick test on MT7623 today
     John

> Zhi Mao (6):
>    pwm: kconfig: modify mediatek information
>    pwm: mediatek: fix pwm source clock selection
>    pwm: mediatek: fix clock control issue
>    pwm: bindings: add MT2712/MT7622 information
>    pwm: mediatek: add PWM_CLK_DIV_MAX
>    pwm: mediatek: add MT2712/MT7622 support
>
>   .../devicetree/bindings/pwm/pwm-mediatek.txt       |    6 +-
>   drivers/pwm/Kconfig                                |    2 +-
>   drivers/pwm/pwm-mediatek.c                         |  132 ++++++++++++++------
>   3 files changed, 103 insertions(+), 37 deletions(-)
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 5/6] pwm: mediatek: add PWM_CLK_DIV_MAX

[m18063]

On 23.06.2017 08:08, Zhi Mao wrote:
> Replace "7" with "PWM_CLK_DIV_MAX" in function:mtk_pwm_config()
> to improve the code readablity.
> 
> Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
> ---
>  drivers/pwm/pwm-mediatek.c |    6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
> index 554a042..e5f6425 100644
> --- a/drivers/pwm/pwm-mediatek.c
> +++ b/drivers/pwm/pwm-mediatek.c
> @@ -30,6 +30,8 @@
>  #define PWMDWIDTH		0x2c
>  #define PWMTHRES		0x30
>  
> +#define PWM_CLK_DIV_MAX		7
> +
>  enum {
>  	MTK_CLK_MAIN = 0,
>  	MTK_CLK_TOP,
> @@ -130,8 +132,10 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>  		clkdiv++;
>  	}
>  
> -	if (clkdiv > 7)
> +	if (clkdiv > PWM_CLK_DIV_MAX) {
You forgot to:
		mtk_pwm_clk_disable(chip, pwm);
> +		dev_err(chip->dev, "period %d not supported\n", period_ns);
>  		return -EINVAL;
> +	}
>  
>  	mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | clkdiv);
>  	mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
> 

Re: [PATCH v2 4/6] pwm: bindings: add MT2712/MT7622 information

[Rob Herring]

On Fri, Jun 23, 2017 at 01:08:23PM +0800, Zhi Mao wrote:
> add MT2712/MT7622 pwm information
> 
> Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
> ---
>  .../devicetree/bindings/pwm/pwm-mediatek.txt       |    6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 5/6] pwm: mediatek: add PWM_CLK_DIV_MAX

[Zhi Mao]

On Mon, 2017-06-26 at 11:43 +0300, m18063 wrote:
> 
> On 23.06.2017 08:08, Zhi Mao wrote:
> > Replace "7" with "PWM_CLK_DIV_MAX" in function:mtk_pwm_config()
> > to improve the code readablity.
> > 
> > Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
> > ---
> >  drivers/pwm/pwm-mediatek.c |    6 +++++-
> >  1 file changed, 5 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
> > index 554a042..e5f6425 100644
> > --- a/drivers/pwm/pwm-mediatek.c
> > +++ b/drivers/pwm/pwm-mediatek.c
> > @@ -30,6 +30,8 @@
> >  #define PWMDWIDTH		0x2c
> >  #define PWMTHRES		0x30
> >  
> > +#define PWM_CLK_DIV_MAX		7
> > +
> >  enum {
> >  	MTK_CLK_MAIN = 0,
> >  	MTK_CLK_TOP,
> > @@ -130,8 +132,10 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> >  		clkdiv++;
> >  	}
> >  
> > -	if (clkdiv > 7)
> > +	if (clkdiv > PWM_CLK_DIV_MAX) {
> You forgot to:
> 		mtk_pwm_clk_disable(chip, pwm);
Hi Claudiu,

Thanks for your suggestion.
It's a problem, I will modify this in the next release.

Regards,
Zhi
> > +		dev_err(chip->dev, "period %d not supported\n", period_ns);
> >  		return -EINVAL;
> > +	}
> >  
> >  	mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | clkdiv);
> >  	mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
> >