* [Outreachy kernel] [PATCH NAND] mtd: nand: Replace printk() with appropriate dev_*macro()
@ 2018-02-19 13:18 Shreeya Patel
2018-02-19 15:12 ` [Outreachy kernel] " Boris Brezillon
0 siblings, 1 reply; 3+ messages in thread
From: Shreeya Patel @ 2018-02-19 13:18 UTC (permalink / raw)
To: boris.brezillon, richard, dwmw2, computersforpeace, marek.vasut,
cyrille.pitchen, maximlevitsky, linux-mtd, linux-kernel,
ezequiel, outreachy-kernel
Cc: Shreeya Patel
Replace printks having a log level with the appropriate
dev_*macro.
Also, use pdev->dev as it is guaranteed in each case to be
properly initialized when passed into dev_*macro().
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
---
drivers/mtd/nand/ams-delta.c | 6 ++++--
drivers/mtd/nand/cafe_nand.c | 5 +++--
drivers/mtd/nand/sh_flctl.c | 2 +-
3 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index dcec9cf..2419ca8 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -185,7 +185,8 @@ static int ams_delta_init(struct platform_device *pdev)
/* Allocate memory for MTD device structure and private data */
this = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
if (!this) {
- printk (KERN_WARNING "Unable to allocate E3 NAND MTD device structure.\n");
+ dev_warn(&pdev->dev,
+ "Unable to allocate E3 NAND MTD device structure.\n");
err = -ENOMEM;
goto out;
}
@@ -219,7 +220,8 @@ static int ams_delta_init(struct platform_device *pdev)
this->dev_ready = ams_delta_nand_ready;
} else {
this->dev_ready = NULL;
- printk(KERN_NOTICE "Couldn't request gpio for Delta NAND ready.\n");
+ dev_notice(&pdev->dev,
+ "Couldn't request gpio for Delta NAND ready.\n");
}
/* 25 us command delay time */
this->chip_delay = 30;
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index bc558c4..51f58ea 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -773,8 +773,9 @@ static int cafe_nand_probe(struct pci_dev *pdev,
cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
} else {
- printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n",
- mtd->writesize);
+ dev_warn(&cafe->pdev->dev,
+ "Unexpected NAND flash writesize %d. Aborting\n",
+ mtd->writesize);
goto out_free_dma;
}
cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index e7f3c98..c534c49 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -877,7 +877,7 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
else if (!flctl->seqin_column)
execmd_write_page_sector(mtd);
else
- printk(KERN_ERR "Invalid address !?\n");
+ dev_err(&flctl->pdev->dev, "Invalid address !?\n");
break;
}
set_cmd_regs(mtd, command, (command << 8) | NAND_CMD_SEQIN);
--
2.7.4
--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
To post to this group, send email to outreachy-kernel@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/1519046339-9678-1-git-send-email-shreeya.patel23498%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Outreachy kernel] Re: [PATCH NAND] mtd: nand: Replace printk() with appropriate dev_*macro()
2018-02-19 13:18 [Outreachy kernel] [PATCH NAND] mtd: nand: Replace printk() with appropriate dev_*macro() Shreeya Patel
@ 2018-02-19 15:12 ` Boris Brezillon
2018-02-19 19:39 ` Shreeya Patel
0 siblings, 1 reply; 3+ messages in thread
From: Boris Brezillon @ 2018-02-19 15:12 UTC (permalink / raw)
To: Shreeya Patel
Cc: boris.brezillon, richard, dwmw2, computersforpeace, marek.vasut,
cyrille.pitchen, maximlevitsky, linux-mtd, linux-kernel,
ezequiel, outreachy-kernel
On Mon, 19 Feb 2018 18:48:59 +0530
Shreeya Patel <shreeya.patel23498@gmail.com> wrote:
> Replace printks having a log level with the appropriate
> dev_*macro.
> Also, use pdev->dev as it is guaranteed in each case to be
> properly initialized when passed into dev_*macro().
>
> Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
> ---
> drivers/mtd/nand/ams-delta.c | 6 ++++--
> drivers/mtd/nand/cafe_nand.c | 5 +++--
> drivers/mtd/nand/sh_flctl.c | 2 +-
> 3 files changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
> index dcec9cf..2419ca8 100644
> --- a/drivers/mtd/nand/ams-delta.c
> +++ b/drivers/mtd/nand/ams-delta.c
> @@ -185,7 +185,8 @@ static int ams_delta_init(struct platform_device *pdev)
> /* Allocate memory for MTD device structure and private data */
> this = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
> if (!this) {
> - printk (KERN_WARNING "Unable to allocate E3 NAND MTD device structure.\n");
> + dev_warn(&pdev->dev,
> + "Unable to allocate E3 NAND MTD device structure.\n");
> err = -ENOMEM;
> goto out;
> }
> @@ -219,7 +220,8 @@ static int ams_delta_init(struct platform_device *pdev)
> this->dev_ready = ams_delta_nand_ready;
> } else {
> this->dev_ready = NULL;
> - printk(KERN_NOTICE "Couldn't request gpio for Delta NAND ready.\n");
> + dev_notice(&pdev->dev,
> + "Couldn't request gpio for Delta NAND ready.\n");
> }
> /* 25 us command delay time */
> this->chip_delay = 30;
> diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
> index bc558c4..51f58ea 100644
> --- a/drivers/mtd/nand/cafe_nand.c
> +++ b/drivers/mtd/nand/cafe_nand.c
> @@ -773,8 +773,9 @@ static int cafe_nand_probe(struct pci_dev *pdev,
> cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
> cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
> } else {
> - printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n",
> - mtd->writesize);
> + dev_warn(&cafe->pdev->dev,
> + "Unexpected NAND flash writesize %d. Aborting\n",
> + mtd->writesize);
> goto out_free_dma;
I see plenty of printk()s (or pr_xxx()s if this patch is applied after
the printk() -> pr_xxx() replacement) that are not converted to
dev_xxx() in this driver. If we start using dev_xxx() it should be used
consistently.
How about we convert all printk()s to pr_xxx()s first (what you do in
your first patch), including those you convert to dev_xxx() here, and
then we consider patching some of the drivers to use dev_xxx() instead
of pr_xxx().
> }
> cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
> diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
> index e7f3c98..c534c49 100644
> --- a/drivers/mtd/nand/sh_flctl.c
> +++ b/drivers/mtd/nand/sh_flctl.c
> @@ -877,7 +877,7 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
> else if (!flctl->seqin_column)
> execmd_write_page_sector(mtd);
> else
> - printk(KERN_ERR "Invalid address !?\n");
> + dev_err(&flctl->pdev->dev, "Invalid address !?\n");
> break;
> }
> set_cmd_regs(mtd, command, (command << 8) | NAND_CMD_SEQIN);
--
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
To post to this group, send email to outreachy-kernel@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20180219161216.4f3ec2f3%40bbrezillon.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Outreachy kernel] Re: [PATCH NAND] mtd: nand: Replace printk() with appropriate dev_*macro()
2018-02-19 15:12 ` [Outreachy kernel] " Boris Brezillon
@ 2018-02-19 19:39 ` Shreeya Patel
0 siblings, 0 replies; 3+ messages in thread
From: Shreeya Patel @ 2018-02-19 19:39 UTC (permalink / raw)
To: Boris Brezillon
Cc: boris.brezillon, richard, dwmw2, computersforpeace, marek.vasut,
cyrille.pitchen, maximlevitsky, linux-mtd, linux-kernel,
ezequiel, outreachy-kernel
On Mon, 2018-02-19 at 16:12 +0100, Boris Brezillon wrote:
> On Mon, 19 Feb 2018 18:48:59 +0530
> Shreeya Patel <shreeya.patel23498@gmail.com> wrote:
>
> >
> > Replace printks having a log level with the appropriate
> > dev_*macro.
> > Also, use pdev->dev as it is guaranteed in each case to be
> > properly initialized when passed into dev_*macro().
> >
> > Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
> > ---
> > drivers/mtd/nand/ams-delta.c | 6 ++++--
> > drivers/mtd/nand/cafe_nand.c | 5 +++--
> > drivers/mtd/nand/sh_flctl.c | 2 +-
> > 3 files changed, 8 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-
> > delta.c
> > index dcec9cf..2419ca8 100644
> > --- a/drivers/mtd/nand/ams-delta.c
> > +++ b/drivers/mtd/nand/ams-delta.c
> > @@ -185,7 +185,8 @@ static int ams_delta_init(struct
> > platform_device *pdev)
> > /* Allocate memory for MTD device structure and private
> > data */
> > this = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
> > if (!this) {
> > - printk (KERN_WARNING "Unable to allocate E3 NAND
> > MTD device structure.\n");
> > + dev_warn(&pdev->dev,
> > + "Unable to allocate E3 NAND MTD device
> > structure.\n");
> > err = -ENOMEM;
> > goto out;
> > }
> > @@ -219,7 +220,8 @@ static int ams_delta_init(struct
> > platform_device *pdev)
> > this->dev_ready = ams_delta_nand_ready;
> > } else {
> > this->dev_ready = NULL;
> > - printk(KERN_NOTICE "Couldn't request gpio for
> > Delta NAND ready.\n");
> > + dev_notice(&pdev->dev,
> > + "Couldn't request gpio for Delta NAND
> > ready.\n");
> > }
> > /* 25 us command delay time */
> > this->chip_delay = 30;
> > diff --git a/drivers/mtd/nand/cafe_nand.c
> > b/drivers/mtd/nand/cafe_nand.c
> > index bc558c4..51f58ea 100644
> > --- a/drivers/mtd/nand/cafe_nand.c
> > +++ b/drivers/mtd/nand/cafe_nand.c
> > @@ -773,8 +773,9 @@ static int cafe_nand_probe(struct pci_dev
> > *pdev,
> > cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
> > cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
> > } else {
> > - printk(KERN_WARNING "Unexpected NAND flash
> > writesize %d. Aborting\n",
> > - mtd->writesize);
> > + dev_warn(&cafe->pdev->dev,
> > + "Unexpected NAND flash writesize %d.
> > Aborting\n",
> > + mtd->writesize);
> > goto out_free_dma;
> I see plenty of printk()s (or pr_xxx()s if this patch is applied
> after
> the printk() -> pr_xxx() replacement) that are not converted to
> dev_xxx() in this driver. If we start using dev_xxx() it should be
> used
> consistently.
>
> How about we convert all printk()s to pr_xxx()s first (what you do in
> your first patch), including those you convert to dev_xxx() here, and
> then we consider patching some of the drivers to use dev_xxx()
> instead
> of pr_xxx().
Yes, this will be better :)
I'll include these changes in my pr_xxx() patch.
Then we will work for dev_xxx().
Thanks
>
> >
> > }
> > cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
> > diff --git a/drivers/mtd/nand/sh_flctl.c
> > b/drivers/mtd/nand/sh_flctl.c
> > index e7f3c98..c534c49 100644
> > --- a/drivers/mtd/nand/sh_flctl.c
> > +++ b/drivers/mtd/nand/sh_flctl.c
> > @@ -877,7 +877,7 @@ static void flctl_cmdfunc(struct mtd_info *mtd,
> > unsigned int command,
> > else if (!flctl->seqin_column)
> > execmd_write_page_sector(mtd);
> > else
> > - printk(KERN_ERR "Invalid address
> > !?\n");
> > + dev_err(&flctl->pdev->dev,
> > "Invalid address !?\n");
> > break;
> > }
> > set_cmd_regs(mtd, command, (command << 8) |
> > NAND_CMD_SEQIN);
>
>
--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
To post to this group, send email to outreachy-kernel@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/1519069191.2102.3.camel%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-02-19 19:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-02-19 13:18 [Outreachy kernel] [PATCH NAND] mtd: nand: Replace printk() with appropriate dev_*macro() Shreeya Patel
2018-02-19 15:12 ` [Outreachy kernel] " Boris Brezillon
2018-02-19 19:39 ` Shreeya Patel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).