linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Philippe Ombredanne <pombredanne@nexb.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kate Stewart <kstewart@linuxfoundation.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Dongdong Liu <liudongdong3@huawei.com>,
	Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
	Sinan Kaya <okaya@codeaurora.org>,
	Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v13 6/6] PCI/DPC: Do not do recovery for hotplug enabled system
Date: Mon,  9 Apr 2018 10:41:54 -0400	[thread overview]
Message-ID: <1523284914-2037-7-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1523284914-2037-1-git-send-email-poza@codeaurora.org>

DPC and AER should attempt recovery in the same way, except the
cases where system is with hotplug enabled.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>

diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index 8e1553b..6d9a841 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -108,8 +108,6 @@ static void dpc_wait_link_inactive(struct dpc_dev *dpc)
  */
 static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 {
-	struct pci_bus *parent = pdev->subordinate;
-	struct pci_dev *dev, *temp;
 	struct dpc_dev *dpc;
 	struct pcie_device *pciedev;
 	struct device *devdpc;
@@ -120,19 +118,6 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 	dpc = get_service_data(pciedev);
 	cap = dpc->cap_pos;
 
-	pci_lock_rescan_remove();
-	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
-					 bus_list) {
-		pci_dev_get(dev);
-		pci_dev_set_disconnected(dev, NULL);
-		if (pci_has_subordinate(dev))
-			pci_walk_bus(dev->subordinate,
-				     pci_dev_set_disconnected, NULL);
-		pci_stop_and_remove_bus_device(dev);
-		pci_dev_put(dev);
-	}
-	pci_unlock_rescan_remove();
-
 	dpc_wait_link_inactive(dpc);
 	if (dpc->rp_extensions && dpc_wait_rp_inactive(dpc))
 		return PCI_ERS_RESULT_DISCONNECT;
@@ -152,13 +137,37 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 	return PCI_ERS_RESULT_RECOVERED;
 }
 
+static void dpc_reset_link_remove_dev(struct pci_dev *pdev)
+{
+	struct pci_bus *parent = pdev->subordinate;
+	struct pci_dev *dev, *temp;
+
+	pci_lock_rescan_remove();
+	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
+					 bus_list) {
+		pci_dev_get(dev);
+		pci_dev_set_disconnected(dev, NULL);
+		if (pci_has_subordinate(dev))
+			pci_walk_bus(dev->subordinate,
+				     pci_dev_set_disconnected, NULL);
+		pci_stop_and_remove_bus_device(dev);
+		pci_dev_put(dev);
+	}
+	pci_unlock_rescan_remove();
+
+	dpc_reset_link(pdev);
+}
+
 static void dpc_work(struct work_struct *work)
 {
 	struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
 	struct pci_dev *pdev = dpc->dev->port;
 
 	/* From DPC point of view error is always FATAL. */
-	pcie_do_recovery(pdev, DPC_FATAL);
+	if (!pdev->is_hotplug_bridge)
+		pcie_do_recovery(pdev, DPC_FATAL);
+	else
+		dpc_reset_link_remove_dev(pdev);
 }
 static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
 {
-- 
2.7.4

  parent reply	other threads:[~2018-04-09 14:41 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-09 14:41 [PATCH v13 0/6] Address error and recovery for AER and DPC Oza Pawandeep
2018-04-09 14:41 ` [PATCH v13 1/6] PCI/AER: Rename error recovery to generic PCI naming Oza Pawandeep
2018-04-09 23:14   ` Keith Busch
2018-04-09 14:41 ` [PATCH v13 2/6] PCI/AER: Factor out error reporting from AER Oza Pawandeep
2018-04-09 23:15   ` Keith Busch
2018-04-10 11:36   ` kbuild test robot
2018-04-09 14:41 ` [PATCH v13 3/6] PCI/PORTDRV: Implement generic find service Oza Pawandeep
2018-04-09 23:15   ` Keith Busch
2018-04-09 14:41 ` [PATCH v13 4/6] PCI/DPC: Unify and plumb error handling into DPC Oza Pawandeep
2018-04-09 23:29   ` Keith Busch
2018-04-09 23:51     ` Sinan Kaya
2018-04-10  0:05       ` Sinan Kaya
2018-04-09 14:41 ` [PATCH v13 5/6] PCI: Unify wait for link active into generic PCI Oza Pawandeep
2018-04-09 23:25   ` Keith Busch
2018-04-12  8:40     ` poza
2018-04-09 14:41 ` Oza Pawandeep [this message]
2018-04-10 21:03   ` [PATCH v13 6/6] PCI/DPC: Do not do recovery for hotplug enabled system Bjorn Helgaas
2018-04-12  1:41     ` Sinan Kaya
2018-04-12 14:06       ` Bjorn Helgaas
2018-04-12 14:34         ` Sinan Kaya
2018-04-12 14:39           ` Keith Busch
2018-04-12 15:02             ` Keith Busch
2018-04-12 16:27               ` Sinan Kaya
2018-04-12 17:09                 ` Keith Busch
2018-04-12 17:41                   ` Sinan Kaya
2018-04-14 15:53                     ` Sinan Kaya
2018-04-16  3:17                       ` Bjorn Helgaas
2018-04-16  5:33                         ` poza
2018-04-16  5:51                           ` poza
2018-04-16 14:01                             ` Bjorn Helgaas
2018-04-16 14:46                         ` Sinan Kaya
2018-04-16 17:15                           ` poza
2018-04-16  3:16 ` [PATCH v13 0/6] Address error and recovery for AER and DPC Bjorn Helgaas
2018-04-16  3:53   ` Sinan Kaya
2018-04-16  6:03     ` poza
2018-04-16 13:27       ` Bjorn Helgaas
2018-04-16 14:12         ` poza
2018-04-16 14:30         ` Sinan Kaya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1523284914-2037-7-git-send-email-poza@codeaurora.org \
    --to=poza@codeaurora.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=keith.busch@intel.com \
    --cc=kstewart@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liudongdong3@huawei.com \
    --cc=okaya@codeaurora.org \
    --cc=pombredanne@nexb.com \
    --cc=tglx@linutronix.de \
    --cc=timur@codeaurora.org \
    --cc=wzhang@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).