[PATCH 4.4 00/56] 4.4.132-stable review

[PATCH 4.4 00/56] 4.4.132-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.132 release.
There are 56 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed May 16 06:47:39 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.132-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.132-rc1

Peter Zijlstra <peterz@infradead.org>
    perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()

Peter Zijlstra <peterz@infradead.org>
    perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]

Peter Zijlstra <peterz@infradead.org>
    perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver

Peter Zijlstra <peterz@infradead.org>
    perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr

Peter Zijlstra <peterz@infradead.org>
    perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*

Masami Hiramatsu <mhiramat@kernel.org>
    tracing/uprobe_event: Fix strncpy corner case

Hans de Goede <hdegoede@redhat.com>
    Revert "Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174"

Gustavo A. R. Silva <gustavo@embeddedor.com>
    atm: zatm: Fix potential Spectre v1

Gustavo A. R. Silva <gustavo@embeddedor.com>
    net: atm: Fix potential Spectre v1

Jimmy Assarsson <extja@kvaser.com>
    can: kvaser_usb: Increase correct stats counter in kvaser_usb_rx_can_msg()

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tracing: Fix regex_match_front() to not over compare the test string

Hans de Goede <hdegoede@redhat.com>
    libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs

Johan Hovold <johan@kernel.org>
    rfkill: gpio: fix memory leak in probe error path

Yi Zhao <yi.zhao@windriver.com>
    xfrm_user: fix return value from xfrm_user_rcv_msg

Wei Fang <fangwei1@huawei.com>
    f2fs: fix a dead loop in f2fs_fiemap()

Jan Kara <jack@suse.cz>
    bdi: Fix oops in wb_workfn()

Eric Dumazet <edumazet@google.com>
    tcp: fix TCP_REPAIR_QUEUE bound checking

Jiri Olsa <jolsa@kernel.org>
    perf: Remove superfluous allocation error check

Eric Dumazet <edumazet@google.com>
    soreuseport: initialise timewait reuseport field

Eric Dumazet <edumazet@google.com>
    dccp: initialize ireq->ir_mark

Eric Dumazet <edumazet@google.com>
    net: fix uninit-value in __hw_addr_add_ex()

Eric Dumazet <edumazet@google.com>
    net: initialize skb->peeked when cloning

Eric Dumazet <edumazet@google.com>
    net: fix rtnh_ok()

Eric Dumazet <edumazet@google.com>
    netlink: fix uninit-value in netlink_sendmsg

Eric Dumazet <edumazet@google.com>
    crypto: af_alg - fix possible uninit-value in alg_bind()

Julian Anastasov <ja@ssi.bg>
    ipvs: fix rtnl_lock lockups caused by start_sync_thread

Bin Liu <b-liu@ti.com>
    usb: musb: host: fix potential NULL pointer dereference

SZ Lin (林上智) <sz.lin@moxa.com>
    USB: serial: option: adding support for ublox R410M

Johan Hovold <johan@kernel.org>
    USB: serial: option: reimplement interface masking

Alan Stern <stern@rowland.harvard.edu>
    USB: Accept bulk endpoints with 1024-byte maxpacket

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    USB: serial: visor: handle potential invalid device configuration

Ben Hutchings <ben.hutchings@codethink.co.uk>
    test_firmware: fix setting old custom fw path back on exit, second try

Thomas Hellstrom <thellstrom@vmware.com>
    drm/vmwgfx: Fix a buffer object leak

Danit Goldberg <danitg@mellanox.com>
    IB/mlx5: Use unlimited rate when static rate is not supported

SZ Lin (林上智) <sz.lin@moxa.com>
    NET: usb: qmi_wwan: add support for ublox R410M PID 0x90b2

Leon Romanovsky <leonro@mellanox.com>
    RDMA/mlx5: Protect from shift operand overflow

Roland Dreier <roland@purestorage.com>
    RDMA/ucma: Allow resolving address w/o specifying source address

Darrick J. Wong <darrick.wong@oracle.com>
    xfs: prevent creating negative-sized file via INSERT_RANGE

Vittorio Gambaletta (VittGam) <linuxbugs@vittgam.net>
    Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    Input: leds - fix out of bound access

Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
    tracepoint: Do not warn on ENOMEM

Takashi Iwai <tiwai@suse.de>
    ALSA: aloop: Add missing cable lock to ctl API callbacks

Robert Rosengren <robert.rosengren@axis.com>
    ALSA: aloop: Mark paused device as inactive

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix races at MIDI encoding in snd_virmidi_output_trigger()

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: Check PCM state at xfern compat ioctl

Kristian Evensen <kristian.evensen@gmail.com>
    USB: serial: option: Add support for Quectel EP06

Markus Pargmann <mpa@pengutronix.de>
    gpmi-nand: Handle ECC Errors in erased pages

Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
    ath10k: rebuild crypto header in rx data frames

Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
    ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode

David Spinadel <david.spinadel@intel.com>
    mac80211: Add RX flag to indicate ICV stripped

Sara Sharon <sara.sharon@intel.com>
    mac80211: allow same PN for AMSDU sub-frames

Sara Sharon <sara.sharon@intel.com>
    mac80211: allow not sending MIC up from driver for HW crypto

Tejun Heo <tj@kernel.org>
    percpu: include linux/sched.h for cond_resched()

Alexander Yarygin <yarygin@linux.vnet.ibm.com>
    KVM: s390: Enable all facility bits that are known good for passthrough

Teng Qin <qinteng@fb.com>
    bpf: map_get_next_key to return first key on NULL

Tan Xiaojun <tanxiaojun@huawei.com>
    perf/core: Fix the perf_cpu_time_max_percent check


-------------

Diffstat:

 Makefile                                          |   4 +-
 arch/s390/kvm/kvm-s390.c                          |   4 +-
 arch/x86/kernel/cpu/perf_event.c                  |   8 +-
 arch/x86/kernel/cpu/perf_event_intel_cstate.c     |   2 +
 arch/x86/kernel/cpu/perf_event_msr.c              |   9 +-
 crypto/af_alg.c                                   |   8 +-
 drivers/ata/libata-core.c                         |   3 +
 drivers/atm/zatm.c                                |   3 +
 drivers/bluetooth/btusb.c                         |   2 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c               |   1 +
 drivers/infiniband/core/ucma.c                    |   2 +-
 drivers/infiniband/hw/mlx5/qp.c                   |  22 +-
 drivers/input/input-leds.c                        |   8 +-
 drivers/input/touchscreen/atmel_mxt_ts.c          |   9 +
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c            |  78 +++-
 drivers/net/can/usb/kvaser_usb.c                  |   2 +-
 drivers/net/usb/qmi_wwan.c                        |   1 +
 drivers/net/wireless/ath/ath10k/core.c            |   8 +
 drivers/net/wireless/ath/ath10k/core.h            |   4 +
 drivers/net/wireless/ath/ath10k/htt_rx.c          | 100 ++++-
 drivers/net/wireless/ath/wcn36xx/txrx.c           |   2 +-
 drivers/usb/core/config.c                         |   4 +-
 drivers/usb/musb/musb_host.c                      |   4 +-
 drivers/usb/serial/option.c                       | 448 ++++++++--------------
 drivers/usb/serial/visor.c                        |  69 ++--
 fs/f2fs/data.c                                    |   2 +-
 fs/fs-writeback.c                                 |   2 +-
 fs/xfs/xfs_file.c                                 |  14 +-
 include/net/inet_timewait_sock.h                  |   1 +
 include/net/mac80211.h                            |  14 +-
 include/net/nexthop.h                             |   2 +-
 kernel/bpf/arraymap.c                             |   2 +-
 kernel/bpf/hashtab.c                              |   9 +-
 kernel/bpf/syscall.c                              |  20 +-
 kernel/events/callchain.c                         |  10 +-
 kernel/events/core.c                              |   2 +-
 kernel/events/ring_buffer.c                       |   7 +-
 kernel/trace/trace_events_filter.c                |   3 +
 kernel/trace/trace_uprobe.c                       |   2 +
 kernel/tracepoint.c                               |   4 +-
 mm/percpu.c                                       |   1 +
 net/atm/lec.c                                     |   9 +-
 net/core/dev_addr_lists.c                         |   4 +-
 net/core/skbuff.c                                 |   1 +
 net/dccp/ipv4.c                                   |   1 +
 net/dccp/ipv6.c                                   |   1 +
 net/ipv4/inet_timewait_sock.c                     |   1 +
 net/ipv4/tcp.c                                    |   2 +-
 net/mac80211/util.c                               |   5 +-
 net/mac80211/wep.c                                |   3 +-
 net/mac80211/wpa.c                                |  45 ++-
 net/netfilter/ipvs/ip_vs_ctl.c                    |   8 -
 net/netfilter/ipvs/ip_vs_sync.c                   | 155 ++++----
 net/netlink/af_netlink.c                          |   2 +
 net/rfkill/rfkill-gpio.c                          |   7 +-
 net/xfrm/xfrm_user.c                              |   2 +-
 sound/core/pcm_compat.c                           |   2 +
 sound/core/seq/seq_virmidi.c                      |   4 +-
 sound/drivers/aloop.c                             |  29 +-
 tools/testing/selftests/firmware/fw_filesystem.sh |   6 +-
 60 files changed, 656 insertions(+), 531 deletions(-)

[PATCH 4.4 01/56] perf/core: Fix the perf_cpu_time_max_percent check

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tan Xiaojun <tanxiaojun@huawei.com>

commit 1572e45a924f254d9570093abde46430c3172e3d upstream.

Use "proc_dointvec_minmax" instead of "proc_dointvec" to check the input
value from user-space.

If not, we can set a big value and some vars will overflow like
"sysctl_perf_event_sample_rate" which will cause a lot of unexpected
problems.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <acme@kernel.org>
Cc: <alexander.shishkin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1487829879-56237-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -229,7 +229,7 @@ int perf_cpu_time_max_percent_handler(st
 				void __user *buffer, size_t *lenp,
 				loff_t *ppos)
 {
-	int ret = proc_dointvec(table, write, buffer, lenp, ppos);
+	int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 
 	if (ret || !write)
 		return ret;

[PATCH 4.4 02/56] bpf: map_get_next_key to return first key on NULL

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Teng Qin <qinteng@fb.com>

commit 8fe45924387be6b5c1be59a7eb330790c61d5d10 upstream.

When iterating through a map, we need to find a key that does not exist
in the map so map_get_next_key will give us the first key of the map.
This often requires a lot of guessing in production systems.

This patch makes map_get_next_key return the first key when the key
pointer in the parameter is NULL.

Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chenbo Feng <fengc@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/bpf/arraymap.c |    2 +-
 kernel/bpf/hashtab.c  |    9 +++++----
 kernel/bpf/syscall.c  |   18 +++++++++++-------
 3 files changed, 17 insertions(+), 12 deletions(-)

--- a/kernel/bpf/arraymap.c
+++ b/kernel/bpf/arraymap.c
@@ -102,7 +102,7 @@ static void *array_map_lookup_elem(struc
 static int array_map_get_next_key(struct bpf_map *map, void *key, void *next_key)
 {
 	struct bpf_array *array = container_of(map, struct bpf_array, map);
-	u32 index = *(u32 *)key;
+	u32 index = key ? *(u32 *)key : U32_MAX;
 	u32 *next = (u32 *)next_key;
 
 	if (index >= array->map.max_entries) {
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -169,12 +169,15 @@ static int htab_map_get_next_key(struct
 	struct hlist_head *head;
 	struct htab_elem *l, *next_l;
 	u32 hash, key_size;
-	int i;
+	int i = 0;
 
 	WARN_ON_ONCE(!rcu_read_lock_held());
 
 	key_size = map->key_size;
 
+	if (!key)
+		goto find_first_elem;
+
 	hash = htab_map_hash(key, key_size);
 
 	head = select_bucket(htab, hash);
@@ -182,10 +185,8 @@ static int htab_map_get_next_key(struct
 	/* lookup the key */
 	l = lookup_elem_raw(head, hash, key, key_size);
 
-	if (!l) {
-		i = 0;
+	if (!l)
 		goto find_first_elem;
-	}
 
 	/* key was found, get next key in the same bucket */
 	next_l = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(&l->hash_node)),
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -390,14 +390,18 @@ static int map_get_next_key(union bpf_at
 	if (IS_ERR(map))
 		return PTR_ERR(map);
 
-	err = -ENOMEM;
-	key = kmalloc(map->key_size, GFP_USER);
-	if (!key)
-		goto err_put;
+	if (ukey) {
+		err = -ENOMEM;
+		key = kmalloc(map->key_size, GFP_USER);
+		if (!key)
+			goto err_put;
 
-	err = -EFAULT;
-	if (copy_from_user(key, ukey, map->key_size) != 0)
-		goto free_key;
+		err = -EFAULT;
+		if (copy_from_user(key, ukey, map->key_size) != 0)
+			goto free_key;
+	} else {
+		key = NULL;
+	}
 
 	err = -ENOMEM;
 	next_key = kmalloc(map->key_size, GFP_USER);

[PATCH 4.4 03/56] KVM: s390: Enable all facility bits that are known good for passthrough

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Yarygin <yarygin@linux.vnet.ibm.com>

commit ed8dda0bf74b4fb8e73d8880c78effabd3285fd8 upstream.

Some facility bits are in a range that is defined to be "ok for guests
without any necessary hypervisor changes". Enable those bits.

Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/kvm/kvm-s390.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -118,8 +118,8 @@ struct kvm_stats_debugfs_item debugfs_en
 
 /* upper facilities limit for kvm */
 unsigned long kvm_s390_fac_list_mask[] = {
-	0xffe6fffbfcfdfc40UL,
-	0x005e800000000000UL,
+	0xffe6ffffffffffffUL,
+	0x005effffffffffffUL,
 };
 
 unsigned long kvm_s390_fac_list_mask_size(void)

[PATCH 4.4 04/56] percpu: include linux/sched.h for cond_resched()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 71546d100422bcc2c543dadeb9328728997cd23a upstream.

microblaze build broke due to missing declaration of the
cond_resched() invocation added recently.  Let's include linux/sched.h
explicitly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/percpu.c |    1 +
 1 file changed, 1 insertion(+)

--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -68,6 +68,7 @@
 #include <linux/vmalloc.h>
 #include <linux/workqueue.h>
 #include <linux/kmemleak.h>
+#include <linux/sched.h>
 
 #include <asm/cacheflush.h>
 #include <asm/sections.h>

[PATCH 4.4 05/56] mac80211: allow not sending MIC up from driver for HW crypto

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sara Sharon <sara.sharon@intel.com>

commit f980ebc058c2fa2a552e495db1de0b330082ab70 upstream.

When HW crypto is used, there's no need for the CCMP/GCMP MIC to
be available to mac80211, and the hardware might have removed it
already after checking. The MIC is also useless to have when the
frame is already decrypted, so allow indicating that it's not
present.

Since we are running out of bits in mac80211_rx_flags, make
the flags field a u64.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath10k/htt_rx.c |    2 +-
 drivers/net/wireless/ath/wcn36xx/txrx.c  |    2 +-
 include/net/mac80211.h                   |    5 ++++-
 net/mac80211/util.c                      |    5 +++--
 net/mac80211/wpa.c                       |   26 ++++++++++++++------------
 5 files changed, 23 insertions(+), 17 deletions(-)

--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -979,7 +979,7 @@ static void ath10k_process_rx(struct ath
 	*status = *rx_status;
 
 	ath10k_dbg(ar, ATH10K_DBG_DATA,
-		   "rx skb %p len %u peer %pM %s %s sn %u %s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%x fcs-err %i mic-err %i amsdu-more %i\n",
+		   "rx skb %p len %u peer %pM %s %s sn %u %s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%llx fcs-err %i mic-err %i amsdu-more %i\n",
 		   skb,
 		   skb->len,
 		   ieee80211_get_SA(hdr),
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -57,7 +57,7 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn,
 		       RX_FLAG_MMIC_STRIPPED |
 		       RX_FLAG_DECRYPTED;
 
-	wcn36xx_dbg(WCN36XX_DBG_RX, "status.flags=%x\n", status.flag);
+	wcn36xx_dbg(WCN36XX_DBG_RX, "status.flags=%llx\n", status.flag);
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
 
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1013,6 +1013,8 @@ ieee80211_tx_info_clear_status(struct ie
  *	on this subframe
  * @RX_FLAG_AMPDU_DELIM_CRC_KNOWN: The delimiter CRC field is known (the CRC
  *	is stored in the @ampdu_delimiter_crc field)
+ * @RX_FLAG_MIC_STRIPPED: The mic was stripped of this packet. Decryption was
+ *	done by the hardware
  * @RX_FLAG_LDPC: LDPC was used
  * @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
  * @RX_FLAG_10MHZ: 10 MHz (half channel) was used
@@ -1059,6 +1061,7 @@ enum mac80211_rx_flags {
 	RX_FLAG_5MHZ			= BIT(29),
 	RX_FLAG_AMSDU_MORE		= BIT(30),
 	RX_FLAG_RADIOTAP_VENDOR_DATA	= BIT(31),
+	RX_FLAG_MIC_STRIPPED            = BIT_ULL(32),
 };
 
 #define RX_FLAG_STBC_SHIFT		26
@@ -1113,7 +1116,7 @@ struct ieee80211_rx_status {
 	u64 mactime;
 	u32 device_timestamp;
 	u32 ampdu_reference;
-	u32 flag;
+	u64 flag;
 	u16 freq;
 	u8 vht_flag;
 	u8 rate_idx;
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2663,8 +2663,9 @@ u64 ieee80211_calculate_rx_timestamp(str
 
 	rate = cfg80211_calculate_bitrate(&ri);
 	if (WARN_ONCE(!rate,
-		      "Invalid bitrate: flags=0x%x, idx=%d, vht_nss=%d\n",
-		      status->flag, status->rate_idx, status->vht_nss))
+		      "Invalid bitrate: flags=0x%llx, idx=%d, vht_nss=%d\n",
+		      (unsigned long long)status->flag, status->rate_idx,
+		      status->vht_nss))
 		return 0;
 
 	/* rewind from end of MPDU */
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -508,18 +508,20 @@ ieee80211_crypto_ccmp_decrypt(struct iee
 	    !ieee80211_is_robust_mgmt_frame(skb))
 		return RX_CONTINUE;
 
-	data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN - mic_len;
-	if (!rx->sta || data_len < 0)
-		return RX_DROP_UNUSABLE;
-
 	if (status->flag & RX_FLAG_DECRYPTED) {
 		if (!pskb_may_pull(rx->skb, hdrlen + IEEE80211_CCMP_HDR_LEN))
 			return RX_DROP_UNUSABLE;
+		if (status->flag & RX_FLAG_MIC_STRIPPED)
+			mic_len = 0;
 	} else {
 		if (skb_linearize(rx->skb))
 			return RX_DROP_UNUSABLE;
 	}
 
+	data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN - mic_len;
+	if (!rx->sta || data_len < 0)
+		return RX_DROP_UNUSABLE;
+
 	if (!(status->flag & RX_FLAG_PN_VALIDATED)) {
 		ccmp_hdr2pn(pn, skb->data + hdrlen);
 
@@ -724,8 +726,7 @@ ieee80211_crypto_gcmp_decrypt(struct iee
 	struct sk_buff *skb = rx->skb;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	u8 pn[IEEE80211_GCMP_PN_LEN];
-	int data_len;
-	int queue;
+	int data_len, queue, mic_len = IEEE80211_GCMP_MIC_LEN;
 
 	hdrlen = ieee80211_hdrlen(hdr->frame_control);
 
@@ -733,19 +734,20 @@ ieee80211_crypto_gcmp_decrypt(struct iee
 	    !ieee80211_is_robust_mgmt_frame(skb))
 		return RX_CONTINUE;
 
-	data_len = skb->len - hdrlen - IEEE80211_GCMP_HDR_LEN -
-		   IEEE80211_GCMP_MIC_LEN;
-	if (!rx->sta || data_len < 0)
-		return RX_DROP_UNUSABLE;
-
 	if (status->flag & RX_FLAG_DECRYPTED) {
 		if (!pskb_may_pull(rx->skb, hdrlen + IEEE80211_GCMP_HDR_LEN))
 			return RX_DROP_UNUSABLE;
+		if (status->flag & RX_FLAG_MIC_STRIPPED)
+			mic_len = 0;
 	} else {
 		if (skb_linearize(rx->skb))
 			return RX_DROP_UNUSABLE;
 	}
 
+	data_len = skb->len - hdrlen - IEEE80211_GCMP_HDR_LEN - mic_len;
+	if (!rx->sta || data_len < 0)
+		return RX_DROP_UNUSABLE;
+
 	if (!(status->flag & RX_FLAG_PN_VALIDATED)) {
 		gcmp_hdr2pn(pn, skb->data + hdrlen);
 
@@ -776,7 +778,7 @@ ieee80211_crypto_gcmp_decrypt(struct iee
 	}
 
 	/* Remove GCMP header and MIC */
-	if (pskb_trim(skb, skb->len - IEEE80211_GCMP_MIC_LEN))
+	if (pskb_trim(skb, skb->len - mic_len))
 		return RX_DROP_UNUSABLE;
 	memmove(skb->data + IEEE80211_GCMP_HDR_LEN, skb->data, hdrlen);
 	skb_pull(skb, IEEE80211_GCMP_HDR_LEN);

[PATCH 4.4 06/56] mac80211: allow same PN for AMSDU sub-frames

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sara Sharon <sara.sharon@intel.com>

commit f631a77ba920f7153a1094d09cd8f2ebbffd0328 upstream.

Some hardware (iwlwifi an example) de-aggregate AMSDUs and copy the IV
as is to the generated MPDUs, so the same PN appears in multiple
packets without being a replay attack.  Allow driver to explicitly
indicate that a frame is allowed to have the same PN as the previous
frame.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/mac80211.h |    6 +++++-
 net/mac80211/wpa.c     |   16 ++++++++++++----
 2 files changed, 17 insertions(+), 5 deletions(-)

--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1031,6 +1031,9 @@ ieee80211_tx_info_clear_status(struct ie
  * @RX_FLAG_RADIOTAP_VENDOR_DATA: This frame contains vendor-specific
  *	radiotap data in the skb->data (before the frame) as described by
  *	the &struct ieee80211_vendor_radiotap.
+ * @RX_FLAG_ALLOW_SAME_PN: Allow the same PN as same packet before.
+ *	This is used for AMSDU subframes which can have the same PN as
+ *	the first subframe.
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR		= BIT(0),
@@ -1061,7 +1064,8 @@ enum mac80211_rx_flags {
 	RX_FLAG_5MHZ			= BIT(29),
 	RX_FLAG_AMSDU_MORE		= BIT(30),
 	RX_FLAG_RADIOTAP_VENDOR_DATA	= BIT(31),
-	RX_FLAG_MIC_STRIPPED            = BIT_ULL(32),
+	RX_FLAG_MIC_STRIPPED		= BIT_ULL(32),
+	RX_FLAG_ALLOW_SAME_PN		= BIT_ULL(33),
 };
 
 #define RX_FLAG_STBC_SHIFT		26
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -523,12 +523,16 @@ ieee80211_crypto_ccmp_decrypt(struct iee
 		return RX_DROP_UNUSABLE;
 
 	if (!(status->flag & RX_FLAG_PN_VALIDATED)) {
+		int res;
+
 		ccmp_hdr2pn(pn, skb->data + hdrlen);
 
 		queue = rx->security_idx;
 
-		if (memcmp(pn, key->u.ccmp.rx_pn[queue],
-			   IEEE80211_CCMP_PN_LEN) <= 0) {
+		res = memcmp(pn, key->u.ccmp.rx_pn[queue],
+			     IEEE80211_CCMP_PN_LEN);
+		if (res < 0 ||
+		    (!res && !(status->flag & RX_FLAG_ALLOW_SAME_PN))) {
 			key->u.ccmp.replays++;
 			return RX_DROP_UNUSABLE;
 		}
@@ -749,12 +753,16 @@ ieee80211_crypto_gcmp_decrypt(struct iee
 		return RX_DROP_UNUSABLE;
 
 	if (!(status->flag & RX_FLAG_PN_VALIDATED)) {
+		int res;
+
 		gcmp_hdr2pn(pn, skb->data + hdrlen);
 
 		queue = rx->security_idx;
 
-		if (memcmp(pn, key->u.gcmp.rx_pn[queue],
-			   IEEE80211_GCMP_PN_LEN) <= 0) {
+		res = memcmp(pn, key->u.gcmp.rx_pn[queue],
+			     IEEE80211_GCMP_PN_LEN);
+		if (res < 0 ||
+		    (!res && !(status->flag & RX_FLAG_ALLOW_SAME_PN))) {
 			key->u.gcmp.replays++;
 			return RX_DROP_UNUSABLE;
 		}

[PATCH 4.4 07/56] mac80211: Add RX flag to indicate ICV stripped

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Spinadel <david.spinadel@intel.com>

commit cef0acd4d7d4811d2d19cd0195031bf0dfe41249 upstream.

Add a flag that indicates that the WEP ICV was stripped from an
RX packet, allowing the device to not transfer that if it's
already checked.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/mac80211.h |    5 ++++-
 net/mac80211/wep.c     |    3 ++-
 net/mac80211/wpa.c     |    3 ++-
 3 files changed, 8 insertions(+), 3 deletions(-)

--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -975,7 +975,7 @@ ieee80211_tx_info_clear_status(struct ie
  * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware.
  * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame,
  *	verification has been done by the hardware.
- * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame.
+ * @RX_FLAG_IV_STRIPPED: The IV and ICV are stripped from this frame.
  *	If this flag is set, the stack cannot do any replay detection
  *	hence the driver or hardware will have to do that.
  * @RX_FLAG_PN_VALIDATED: Currently only valid for CCMP/GCMP frames, this
@@ -1034,6 +1034,8 @@ ieee80211_tx_info_clear_status(struct ie
  * @RX_FLAG_ALLOW_SAME_PN: Allow the same PN as same packet before.
  *	This is used for AMSDU subframes which can have the same PN as
  *	the first subframe.
+ * @RX_FLAG_ICV_STRIPPED: The ICV is stripped from this frame. CRC checking must
+ *	be done in the hardware.
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR		= BIT(0),
@@ -1066,6 +1068,7 @@ enum mac80211_rx_flags {
 	RX_FLAG_RADIOTAP_VENDOR_DATA	= BIT(31),
 	RX_FLAG_MIC_STRIPPED		= BIT_ULL(32),
 	RX_FLAG_ALLOW_SAME_PN		= BIT_ULL(33),
+	RX_FLAG_ICV_STRIPPED		= BIT_ULL(34),
 };
 
 #define RX_FLAG_STBC_SHIFT		26
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -293,7 +293,8 @@ ieee80211_crypto_wep_decrypt(struct ieee
 			return RX_DROP_UNUSABLE;
 		ieee80211_wep_remove_iv(rx->local, rx->skb, rx->key);
 		/* remove ICV */
-		if (pskb_trim(rx->skb, rx->skb->len - IEEE80211_WEP_ICV_LEN))
+		if (!(status->flag & RX_FLAG_ICV_STRIPPED) &&
+		    pskb_trim(rx->skb, rx->skb->len - IEEE80211_WEP_ICV_LEN))
 			return RX_DROP_UNUSABLE;
 	}
 
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -298,7 +298,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
 		return RX_DROP_UNUSABLE;
 
 	/* Trim ICV */
-	skb_trim(skb, skb->len - IEEE80211_TKIP_ICV_LEN);
+	if (!(status->flag & RX_FLAG_ICV_STRIPPED))
+		skb_trim(skb, skb->len - IEEE80211_TKIP_ICV_LEN);
 
 	/* Remove IV */
 	memmove(skb->data + IEEE80211_TKIP_IV_LEN, skb->data, hdrlen);

[PATCH 4.4 08/56] ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>

commit 2f38c3c01de945234d23dd163e3528ccb413066d upstream.

Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
rx_hdr_status is not padded to align in 4-byte boundary. Define a
new hw_params field to handle different alignment behaviour between
different hw. This patch fixes improper retrieval of rfc1042 header
with QCA4019. This patch along with "ath10k: Properly remove padding
from the start of rx payload" will fix traffic failure in ethernet
decap mode for QCA4019.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/ath/ath10k/core.c |    8 ++++++++
 drivers/net/wireless/ath/ath10k/core.h |    4 ++++
 2 files changed, 12 insertions(+)

--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -67,6 +67,7 @@ static const struct ath10k_hw_params ath
 			.board_size = QCA988X_BOARD_DATA_SZ,
 			.board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -85,6 +86,7 @@ static const struct ath10k_hw_params ath
 			.board_size = QCA6174_BOARD_DATA_SZ,
 			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -103,6 +105,7 @@ static const struct ath10k_hw_params ath
 			.board_size = QCA6174_BOARD_DATA_SZ,
 			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA6174_HW_3_0_VERSION,
@@ -121,6 +124,7 @@ static const struct ath10k_hw_params ath
 			.board_size = QCA6174_BOARD_DATA_SZ,
 			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -140,6 +144,7 @@ static const struct ath10k_hw_params ath
 			.board_size = QCA6174_BOARD_DATA_SZ,
 			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -159,6 +164,7 @@ static const struct ath10k_hw_params ath
 			.board_size = QCA99X0_BOARD_DATA_SZ,
 			.board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 1,
 	},
 	{
 		.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -177,6 +183,7 @@ static const struct ath10k_hw_params ath
 			.board_size = QCA9377_BOARD_DATA_SZ,
 			.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -195,6 +202,7 @@ static const struct ath10k_hw_params ath
 			.board_size = QCA9377_BOARD_DATA_SZ,
 			.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 };
 
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -670,6 +670,10 @@ struct ath10k {
 			size_t board_size;
 			size_t board_ext_size;
 		} fw;
+
+		/* Number of bytes used for alignment in rx_hdr_status */
+		int decap_align_bytes;
+
 	} hw_params;
 
 	const struct firmware *board;

[PATCH 4.4 09/56] ath10k: rebuild crypto header in rx data frames

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>

commit 7eccb738fce57cbe53ed903ccf43f9ab257b15b3 upstream.

Rx data frames notified through HTT_T2H_MSG_TYPE_RX_IND and
HTT_T2H_MSG_TYPE_RX_FRAG_IND expect PN/TSC check to be done
on host (mac80211) rather than firmware. Rebuild cipher header
in every received data frames (that are notified through those
HTT interfaces) from the rx_hdr_status tlv available in the
rx descriptor of the first msdu. Skip setting RX_FLAG_IV_STRIPPED
flag for the packets which requires mac80211 PN/TSC check support
and set appropriate RX_FLAG for stripped crypto tail. Hw QCA988X,
QCA9887, QCA99X0, QCA9984, QCA9888 and QCA4019 currently need the
rebuilding of cipher header to perform PN/TSC check for replay
attack.

Please note that removing crypto tail for CCMP-256, GCMP and GCMP-256 ciphers
in raw mode needs to be fixed. Since Rx with these ciphers in raw
mode does not work in the current form even without this patch and
removing crypto tail for these chipers needs clean up, raw mode related
issues in CCMP-256, GCMP and GCMP-256 can be addressed in follow up
patches.

Tested-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c |   98 +++++++++++++++++++++++++------
 1 file changed, 82 insertions(+), 16 deletions(-)

--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1076,7 +1076,21 @@ static void ath10k_htt_rx_h_undecap_raw(
 	hdr = (void *)msdu->data;
 
 	/* Tail */
-	skb_trim(msdu, msdu->len - ath10k_htt_rx_crypto_tail_len(ar, enctype));
+	if (status->flag & RX_FLAG_IV_STRIPPED) {
+		skb_trim(msdu, msdu->len -
+			 ath10k_htt_rx_crypto_tail_len(ar, enctype));
+	} else {
+		/* MIC */
+		if ((status->flag & RX_FLAG_MIC_STRIPPED) &&
+		    enctype == HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2)
+			skb_trim(msdu, msdu->len - 8);
+
+		/* ICV */
+		if (status->flag & RX_FLAG_ICV_STRIPPED &&
+		    enctype != HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2)
+			skb_trim(msdu, msdu->len -
+				 ath10k_htt_rx_crypto_tail_len(ar, enctype));
+	}
 
 	/* MMIC */
 	if (!ieee80211_has_morefrags(hdr->frame_control) &&
@@ -1095,12 +1109,14 @@ static void ath10k_htt_rx_h_undecap_raw(
 static void ath10k_htt_rx_h_undecap_nwifi(struct ath10k *ar,
 					  struct sk_buff *msdu,
 					  struct ieee80211_rx_status *status,
-					  const u8 first_hdr[64])
+					  const u8 first_hdr[64],
+					  enum htt_rx_mpdu_encrypt_type enctype)
 {
 	struct ieee80211_hdr *hdr;
 	size_t hdr_len;
 	u8 da[ETH_ALEN];
 	u8 sa[ETH_ALEN];
+	int bytes_aligned = ar->hw_params.decap_align_bytes;
 
 	/* Delivered decapped frame:
 	 * [nwifi 802.11 header] <-- replaced with 802.11 hdr
@@ -1123,6 +1139,14 @@ static void ath10k_htt_rx_h_undecap_nwif
 	/* push original 802.11 header */
 	hdr = (struct ieee80211_hdr *)first_hdr;
 	hdr_len = ieee80211_hdrlen(hdr->frame_control);
+
+	if (!(status->flag & RX_FLAG_IV_STRIPPED)) {
+		memcpy(skb_push(msdu,
+				ath10k_htt_rx_crypto_param_len(ar, enctype)),
+		       (void *)hdr + round_up(hdr_len, bytes_aligned),
+			ath10k_htt_rx_crypto_param_len(ar, enctype));
+	}
+
 	memcpy(skb_push(msdu, hdr_len), hdr, hdr_len);
 
 	/* original 802.11 header has a different DA and in
@@ -1180,6 +1204,7 @@ static void ath10k_htt_rx_h_undecap_eth(
 	void *rfc1042;
 	u8 da[ETH_ALEN];
 	u8 sa[ETH_ALEN];
+	int bytes_aligned = ar->hw_params.decap_align_bytes;
 
 	/* Delivered decapped frame:
 	 * [eth header] <-- replaced with 802.11 hdr & rfc1042/llc
@@ -1203,6 +1228,14 @@ static void ath10k_htt_rx_h_undecap_eth(
 	/* push original 802.11 header */
 	hdr = (struct ieee80211_hdr *)first_hdr;
 	hdr_len = ieee80211_hdrlen(hdr->frame_control);
+
+	if (!(status->flag & RX_FLAG_IV_STRIPPED)) {
+		memcpy(skb_push(msdu,
+				ath10k_htt_rx_crypto_param_len(ar, enctype)),
+		       (void *)hdr + round_up(hdr_len, bytes_aligned),
+			ath10k_htt_rx_crypto_param_len(ar, enctype));
+	}
+
 	memcpy(skb_push(msdu, hdr_len), hdr, hdr_len);
 
 	/* original 802.11 header has a different DA and in
@@ -1216,10 +1249,12 @@ static void ath10k_htt_rx_h_undecap_eth(
 static void ath10k_htt_rx_h_undecap_snap(struct ath10k *ar,
 					 struct sk_buff *msdu,
 					 struct ieee80211_rx_status *status,
-					 const u8 first_hdr[64])
+					 const u8 first_hdr[64],
+					 enum htt_rx_mpdu_encrypt_type enctype)
 {
 	struct ieee80211_hdr *hdr;
 	size_t hdr_len;
+	int bytes_aligned = ar->hw_params.decap_align_bytes;
 
 	/* Delivered decapped frame:
 	 * [amsdu header] <-- replaced with 802.11 hdr
@@ -1231,6 +1266,14 @@ static void ath10k_htt_rx_h_undecap_snap
 
 	hdr = (struct ieee80211_hdr *)first_hdr;
 	hdr_len = ieee80211_hdrlen(hdr->frame_control);
+
+	if (!(status->flag & RX_FLAG_IV_STRIPPED)) {
+		memcpy(skb_push(msdu,
+				ath10k_htt_rx_crypto_param_len(ar, enctype)),
+		       (void *)hdr + round_up(hdr_len, bytes_aligned),
+			ath10k_htt_rx_crypto_param_len(ar, enctype));
+	}
+
 	memcpy(skb_push(msdu, hdr_len), hdr, hdr_len);
 }
 
@@ -1265,13 +1308,15 @@ static void ath10k_htt_rx_h_undecap(stru
 					    is_decrypted);
 		break;
 	case RX_MSDU_DECAP_NATIVE_WIFI:
-		ath10k_htt_rx_h_undecap_nwifi(ar, msdu, status, first_hdr);
+		ath10k_htt_rx_h_undecap_nwifi(ar, msdu, status, first_hdr,
+					      enctype);
 		break;
 	case RX_MSDU_DECAP_ETHERNET2_DIX:
 		ath10k_htt_rx_h_undecap_eth(ar, msdu, status, first_hdr, enctype);
 		break;
 	case RX_MSDU_DECAP_8023_SNAP_LLC:
-		ath10k_htt_rx_h_undecap_snap(ar, msdu, status, first_hdr);
+		ath10k_htt_rx_h_undecap_snap(ar, msdu, status, first_hdr,
+					     enctype);
 		break;
 	}
 }
@@ -1314,7 +1359,8 @@ static void ath10k_htt_rx_h_csum_offload
 
 static void ath10k_htt_rx_h_mpdu(struct ath10k *ar,
 				 struct sk_buff_head *amsdu,
-				 struct ieee80211_rx_status *status)
+				 struct ieee80211_rx_status *status,
+				 bool fill_crypt_header)
 {
 	struct sk_buff *first;
 	struct sk_buff *last;
@@ -1324,7 +1370,6 @@ static void ath10k_htt_rx_h_mpdu(struct
 	enum htt_rx_mpdu_encrypt_type enctype;
 	u8 first_hdr[64];
 	u8 *qos;
-	size_t hdr_len;
 	bool has_fcs_err;
 	bool has_crypto_err;
 	bool has_tkip_err;
@@ -1345,15 +1390,17 @@ static void ath10k_htt_rx_h_mpdu(struct
 	 * decapped header. It'll be used for undecapping of each MSDU.
 	 */
 	hdr = (void *)rxd->rx_hdr_status;
-	hdr_len = ieee80211_hdrlen(hdr->frame_control);
-	memcpy(first_hdr, hdr, hdr_len);
+	memcpy(first_hdr, hdr, RX_HTT_HDR_STATUS_LEN);
 
 	/* Each A-MSDU subframe will use the original header as the base and be
 	 * reported as a separate MSDU so strip the A-MSDU bit from QoS Ctl.
 	 */
 	hdr = (void *)first_hdr;
-	qos = ieee80211_get_qos_ctl(hdr);
-	qos[0] &= ~IEEE80211_QOS_CTL_A_MSDU_PRESENT;
+
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		qos = ieee80211_get_qos_ctl(hdr);
+		qos[0] &= ~IEEE80211_QOS_CTL_A_MSDU_PRESENT;
+	}
 
 	/* Some attention flags are valid only in the last MSDU. */
 	last = skb_peek_tail(amsdu);
@@ -1387,11 +1434,17 @@ static void ath10k_htt_rx_h_mpdu(struct
 	if (has_tkip_err)
 		status->flag |= RX_FLAG_MMIC_ERROR;
 
-	if (is_decrypted)
+	if (is_decrypted) {
 		status->flag |= RX_FLAG_DECRYPTED |
-				RX_FLAG_IV_STRIPPED |
 				RX_FLAG_MMIC_STRIPPED;
 
+		if (fill_crypt_header)
+			status->flag |= RX_FLAG_MIC_STRIPPED |
+					RX_FLAG_ICV_STRIPPED;
+		else
+			status->flag |= RX_FLAG_IV_STRIPPED;
+	}
+
 	skb_queue_walk(amsdu, msdu) {
 		ath10k_htt_rx_h_csum_offload(msdu);
 		ath10k_htt_rx_h_undecap(ar, msdu, status, first_hdr, enctype,
@@ -1404,6 +1457,9 @@ static void ath10k_htt_rx_h_mpdu(struct
 		if (!is_decrypted)
 			continue;
 
+		if (fill_crypt_header)
+			continue;
+
 		hdr = (void *)msdu->data;
 		hdr->frame_control &= ~__cpu_to_le16(IEEE80211_FCTL_PROTECTED);
 	}
@@ -1414,6 +1470,9 @@ static void ath10k_htt_rx_h_deliver(stru
 				    struct ieee80211_rx_status *status)
 {
 	struct sk_buff *msdu;
+	struct sk_buff *first_subframe;
+
+	first_subframe = skb_peek(amsdu);
 
 	while ((msdu = __skb_dequeue(amsdu))) {
 		/* Setup per-MSDU flags */
@@ -1422,6 +1481,13 @@ static void ath10k_htt_rx_h_deliver(stru
 		else
 			status->flag |= RX_FLAG_AMSDU_MORE;
 
+		if (msdu == first_subframe) {
+			first_subframe = NULL;
+			status->flag &= ~RX_FLAG_ALLOW_SAME_PN;
+		} else {
+			status->flag |= RX_FLAG_ALLOW_SAME_PN;
+		}
+
 		ath10k_process_rx(ar, status, msdu);
 	}
 }
@@ -1607,7 +1673,7 @@ static void ath10k_htt_rx_handler(struct
 		ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status, 0xffff);
 		ath10k_htt_rx_h_unchain(ar, &amsdu, ret > 0);
 		ath10k_htt_rx_h_filter(ar, &amsdu, rx_status);
-		ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status);
+		ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status, true);
 		ath10k_htt_rx_h_deliver(ar, &amsdu, rx_status);
 	}
 
@@ -1653,7 +1719,7 @@ static void ath10k_htt_rx_frag_handler(s
 
 	ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status, 0xffff);
 	ath10k_htt_rx_h_filter(ar, &amsdu, rx_status);
-	ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status);
+	ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status, true);
 	ath10k_htt_rx_h_deliver(ar, &amsdu, rx_status);
 
 	if (fw_desc_len > 0) {
@@ -1952,7 +2018,7 @@ static void ath10k_htt_rx_in_ord_ind(str
 			 */
 			ath10k_htt_rx_h_ppdu(ar, &amsdu, status, vdev_id);
 			ath10k_htt_rx_h_filter(ar, &amsdu, status);
-			ath10k_htt_rx_h_mpdu(ar, &amsdu, status);
+			ath10k_htt_rx_h_mpdu(ar, &amsdu, status, false);
 			ath10k_htt_rx_h_deliver(ar, &amsdu, status);
 			break;
 		case -EAGAIN:

[PATCH 4.4 10/56] gpmi-nand: Handle ECC Errors in erased pages

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Markus Pargmann <mpa@pengutronix.de>

commit bd2e778c9ee361c23ccb2b10591712e129d97893 upstream.

ECC is only calculated for written pages. As erased pages are not
actively written the ECC is always invalid. For this purpose the
Hardware BCH unit is able to check for erased pages and does not raise
an ECC error in this case. This behaviour can be influenced using the
BCH_MODE register which sets the number of allowed bitflips in an erased
page. Unfortunately the unit is not capable of fixing the bitflips in
memory.

To avoid complete software checks for erased pages, we can simply check
buffers with uncorrectable ECC errors because we know that any erased
page with errors is uncorrectable by the BCH unit.

This patch adds the generic nand_check_erased_ecc_chunk() to gpmi-nand
to correct erased pages. To have the valid data in the buffer before
using them, this patch moves the read_page_swap_end() call before the
ECC status checking for-loop.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
[Squashed patches by Stefan and Boris to check ECC area]
Tested-by: Stefan Christ <s.christ@phytec.de>
Acked-by: Han xu <han.xu@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c |   78 ++++++++++++++++++++++++++++++---
 1 file changed, 73 insertions(+), 5 deletions(-)

--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1032,14 +1032,87 @@ static int gpmi_ecc_read_page(struct mtd
 	/* Loop over status bytes, accumulating ECC status. */
 	status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
 
+	read_page_swap_end(this, buf, nfc_geo->payload_size,
+			   this->payload_virt, this->payload_phys,
+			   nfc_geo->payload_size,
+			   payload_virt, payload_phys);
+
 	for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
 		if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
 			continue;
 
 		if (*status == STATUS_UNCORRECTABLE) {
+			int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
+			u8 *eccbuf = this->raw_buffer;
+			int offset, bitoffset;
+			int eccbytes;
+			int flips;
+
+			/* Read ECC bytes into our internal raw_buffer */
+			offset = nfc_geo->metadata_size * 8;
+			offset += ((8 * nfc_geo->ecc_chunk_size) + eccbits) * (i + 1);
+			offset -= eccbits;
+			bitoffset = offset % 8;
+			eccbytes = DIV_ROUND_UP(offset + eccbits, 8);
+			offset /= 8;
+			eccbytes -= offset;
+			chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+			chip->read_buf(mtd, eccbuf, eccbytes);
+
+			/*
+			 * ECC data are not byte aligned and we may have
+			 * in-band data in the first and last byte of
+			 * eccbuf. Set non-eccbits to one so that
+			 * nand_check_erased_ecc_chunk() does not count them
+			 * as bitflips.
+			 */
+			if (bitoffset)
+				eccbuf[0] |= GENMASK(bitoffset - 1, 0);
+
+			bitoffset = (bitoffset + eccbits) % 8;
+			if (bitoffset)
+				eccbuf[eccbytes - 1] |= GENMASK(7, bitoffset);
+
+			/*
+			 * The ECC hardware has an uncorrectable ECC status
+			 * code in case we have bitflips in an erased page. As
+			 * nothing was written into this subpage the ECC is
+			 * obviously wrong and we can not trust it. We assume
+			 * at this point that we are reading an erased page and
+			 * try to correct the bitflips in buffer up to
+			 * ecc_strength bitflips. If this is a page with random
+			 * data, we exceed this number of bitflips and have a
+			 * ECC failure. Otherwise we use the corrected buffer.
+			 */
+			if (i == 0) {
+				/* The first block includes metadata */
+				flips = nand_check_erased_ecc_chunk(
+						buf + i * nfc_geo->ecc_chunk_size,
+						nfc_geo->ecc_chunk_size,
+						eccbuf, eccbytes,
+						auxiliary_virt,
+						nfc_geo->metadata_size,
+						nfc_geo->ecc_strength);
+			} else {
+				flips = nand_check_erased_ecc_chunk(
+						buf + i * nfc_geo->ecc_chunk_size,
+						nfc_geo->ecc_chunk_size,
+						eccbuf, eccbytes,
+						NULL, 0,
+						nfc_geo->ecc_strength);
+			}
+
+			if (flips > 0) {
+				max_bitflips = max_t(unsigned int, max_bitflips,
+						     flips);
+				mtd->ecc_stats.corrected += flips;
+				continue;
+			}
+
 			mtd->ecc_stats.failed++;
 			continue;
 		}
+
 		mtd->ecc_stats.corrected += *status;
 		max_bitflips = max_t(unsigned int, max_bitflips, *status);
 	}
@@ -1062,11 +1135,6 @@ static int gpmi_ecc_read_page(struct mtd
 		chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
 	}
 
-	read_page_swap_end(this, buf, nfc_geo->payload_size,
-			this->payload_virt, this->payload_phys,
-			nfc_geo->payload_size,
-			payload_virt, payload_phys);
-
 	return max_bitflips;
 }
 

[PATCH 4.4 11/56] USB: serial: option: Add support for Quectel EP06

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kristian Evensen <kristian.evensen@gmail.com>

commit 71a0483d56e784b1e11f38f10d7e22d265dbe244 upstream.

The Quectel EP06 is a Cat. 6 LTE modem, and the interface mapping is as
follows:

0: Diag
1: NMEA
2: AT
3: Modem

Interface 4 is QMI and interface 5 is ADB, so they are blacklisted.

This patch should also be considered for -stable. The QMI-patch for this
modem is already in the -stable-queue.

v1->v2:
* Updated commit prefix (thanks Johan Hovold)
* Updated commit message slightly.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -244,6 +244,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_EC21			0x0121
 #define QUECTEL_PRODUCT_EC25			0x0125
 #define QUECTEL_PRODUCT_BG96			0x0296
+#define QUECTEL_PRODUCT_EP06			0x0306
 
 #define CMOTECH_VENDOR_ID			0x16d8
 #define CMOTECH_PRODUCT_6001			0x6001
@@ -692,6 +693,10 @@ static const struct option_blacklist_inf
 	.reserved = BIT(1) | BIT(4),
 };
 
+static const struct option_blacklist_info quectel_ep06_blacklist = {
+	.reserved = BIT(4) | BIT(5),
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -1206,6 +1211,8 @@ static const struct usb_device_id option
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06),
+	  .driver_info = (kernel_ulong_t)&quectel_ep06_blacklist },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),

[PATCH 4.4 12/56] ALSA: pcm: Check PCM state at xfern compat ioctl

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit f13876e2c33a657a71bcbb10f767c0951b165020 upstream.

Since snd_pcm_ioctl_xfern_compat() has no PCM state check, it may go
further and hit the sanity check pcm_sanity_check() when the ioctl is
called right after open.  It may eventually spew a kernel warning, as
triggered by syzbot, depending on kconfig.

The lack of PCM state check there was just an oversight.  Although
it's no real crash, the spurious kernel warning is annoying, so let's
add the proper check.

Reported-by: syzbot+1dac3a4f6bc9c1c675d4@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/pcm_compat.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/core/pcm_compat.c
+++ b/sound/core/pcm_compat.c
@@ -426,6 +426,8 @@ static int snd_pcm_ioctl_xfern_compat(st
 		return -ENOTTY;
 	if (substream->stream != dir)
 		return -EINVAL;
+	if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN)
+		return -EBADFD;
 
 	if ((ch = substream->runtime->channels) > 128)
 		return -EINVAL;

[PATCH 4.4 13/56] ALSA: seq: Fix races at MIDI encoding in snd_virmidi_output_trigger()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 8f22e52528cc372b218b5f100457469615c733ce upstream.

The sequencer virmidi code has an open race at its output trigger
callback: namely, virmidi keeps only one event packet for processing
while it doesn't protect for concurrent output trigger calls.

snd_virmidi_output_trigger() tries to process the previously
unfinished event before starting encoding the given MIDI stream, but
this is done without any lock.  Meanwhile, if another rawmidi stream
starts the output trigger, this proceeds further, and overwrites the
event package that is being processed in another thread.  This
eventually corrupts and may lead to the invalid memory access if the
event type is like SYSEX.

The fix is just to move the spinlock to cover both the pending event
and the new stream.

The bug was spotted by a new fuzzer, RaceFuzzer.

BugLink: http://lkml.kernel.org/r/20180426045223.GA15307@dragonet.kaist.ac.kr
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/seq_virmidi.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/core/seq/seq_virmidi.c
+++ b/sound/core/seq/seq_virmidi.c
@@ -174,12 +174,12 @@ static void snd_virmidi_output_trigger(s
 			}
 			return;
 		}
+		spin_lock_irqsave(&substream->runtime->lock, flags);
 		if (vmidi->event.type != SNDRV_SEQ_EVENT_NONE) {
 			if (snd_seq_kernel_client_dispatch(vmidi->client, &vmidi->event, in_atomic(), 0) < 0)
-				return;
+				goto out;
 			vmidi->event.type = SNDRV_SEQ_EVENT_NONE;
 		}
-		spin_lock_irqsave(&substream->runtime->lock, flags);
 		while (1) {
 			count = __snd_rawmidi_transmit_peek(substream, buf, sizeof(buf));
 			if (count <= 0)

[PATCH 4.4 14/56] ALSA: aloop: Mark paused device as inactive

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robert Rosengren <robert.rosengren@axis.com>

commit 306a4f3ca7f3c7dfa473ebd19d66e40e59d99734 upstream.

Show paused ALSA aloop device as inactive, i.e. the control
"PCM Slave Active" set as false. Notification sent upon state change.

This makes it possible for client capturing from aloop device to know if
data is expected. Without it the client expects data even if playback
is paused.

Signed-off-by: Robert Rosengren <robert.rosengren@axis.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/drivers/aloop.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -296,6 +296,8 @@ static int loopback_trigger(struct snd_p
 		cable->pause |= stream;
 		loopback_timer_stop(dpcm);
 		spin_unlock(&cable->lock);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			loopback_active_notify(dpcm);
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 	case SNDRV_PCM_TRIGGER_RESUME:
@@ -304,6 +306,8 @@ static int loopback_trigger(struct snd_p
 		cable->pause &= ~stream;
 		loopback_timer_start(dpcm);
 		spin_unlock(&cable->lock);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			loopback_active_notify(dpcm);
 		break;
 	default:
 		return -EINVAL;
@@ -893,9 +897,11 @@ static int loopback_active_get(struct sn
 			[kcontrol->id.subdevice][kcontrol->id.device ^ 1];
 	unsigned int val = 0;
 
-	if (cable != NULL)
-		val = (cable->running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ?
-									1 : 0;
+	if (cable != NULL) {
+		unsigned int running = cable->running ^ cable->pause;
+
+		val = (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ? 1 : 0;
+	}
 	ucontrol->value.integer.value[0] = val;
 	return 0;
 }

[PATCH 4.4 15/56] ALSA: aloop: Add missing cable lock to ctl API callbacks

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 76b3421b39bd610546931fc923edcf90c18fa395 upstream.

Some control API callbacks in aloop driver are too lazy to take the
loopback->cable_lock and it results in possible races of cable access
while it's being freed.  It eventually lead to a UAF, as reported by
fuzzer recently.

This patch covers such control API callbacks and add the proper mutex
locks.

Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/drivers/aloop.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -832,9 +832,11 @@ static int loopback_rate_shift_get(struc
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].rate_shift;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 
@@ -866,9 +868,11 @@ static int loopback_notify_get(struct sn
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].notify;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 
@@ -880,12 +884,14 @@ static int loopback_notify_put(struct sn
 	int change = 0;
 
 	val = ucontrol->value.integer.value[0] ? 1 : 0;
+	mutex_lock(&loopback->cable_lock);
 	if (val != loopback->setup[kcontrol->id.subdevice]
 				[kcontrol->id.device].notify) {
 		loopback->setup[kcontrol->id.subdevice]
 			[kcontrol->id.device].notify = val;
 		change = 1;
 	}
+	mutex_unlock(&loopback->cable_lock);
 	return change;
 }
 
@@ -893,15 +899,18 @@ static int loopback_active_get(struct sn
 			       struct snd_ctl_elem_value *ucontrol)
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
-	struct loopback_cable *cable = loopback->cables
-			[kcontrol->id.subdevice][kcontrol->id.device ^ 1];
+	struct loopback_cable *cable;
+
 	unsigned int val = 0;
 
+	mutex_lock(&loopback->cable_lock);
+	cable = loopback->cables[kcontrol->id.subdevice][kcontrol->id.device ^ 1];
 	if (cable != NULL) {
 		unsigned int running = cable->running ^ cable->pause;
 
 		val = (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ? 1 : 0;
 	}
+	mutex_unlock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] = val;
 	return 0;
 }
@@ -944,9 +953,11 @@ static int loopback_rate_get(struct snd_
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].rate;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 
@@ -966,9 +977,11 @@ static int loopback_channels_get(struct
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].channels;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 

[PATCH 4.4 16/56] tracepoint: Do not warn on ENOMEM

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

commit d66a270be3310d7aa132fec0cea77d3d32a0ff75 upstream.

Tracepoint should only warn when a kernel API user does not respect the
required preconditions (e.g. same tracepoint enabled twice, or called
to remove a tracepoint that does not exist).

Silence warning in out-of-memory conditions, given that the error is
returned to the caller.

This ensures that out-of-memory error-injection testing does not trigger
warnings in tracepoint.c, which were seen by syzbot.

Link: https://lkml.kernel.org/r/001a114465e241a8720567419a72@google.com
Link: https://lkml.kernel.org/r/001a1140e0de15fc910567464190@google.com
Link: http://lkml.kernel.org/r/20180315124424.32319-1-mathieu.desnoyers@efficios.com

CC: Peter Zijlstra <peterz@infradead.org>
CC: Jiri Olsa <jolsa@redhat.com>
CC: Arnaldo Carvalho de Melo <acme@kernel.org>
CC: Alexander Shishkin <alexander.shishkin@linux.intel.com>
CC: Namhyung Kim <namhyung@kernel.org>
CC: stable@vger.kernel.org
Fixes: de7b2973903c6 ("tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints")
Reported-by: syzbot+9c0d616860575a73166a@syzkaller.appspotmail.com
Reported-by: syzbot+4e9ae7fa46233396f64d@syzkaller.appspotmail.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/tracepoint.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/tracepoint.c
+++ b/kernel/tracepoint.c
@@ -202,7 +202,7 @@ static int tracepoint_add_func(struct tr
 			lockdep_is_held(&tracepoints_mutex));
 	old = func_add(&tp_funcs, func, prio);
 	if (IS_ERR(old)) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(PTR_ERR(old) != -ENOMEM);
 		return PTR_ERR(old);
 	}
 
@@ -235,7 +235,7 @@ static int tracepoint_remove_func(struct
 			lockdep_is_held(&tracepoints_mutex));
 	old = func_remove(&tp_funcs, func);
 	if (IS_ERR(old)) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(PTR_ERR(old) != -ENOMEM);
 		return PTR_ERR(old);
 	}
 

[PATCH 4.4 17/56] Input: leds - fix out of bound access

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

commit 6bd6ae639683c0b41f46990d5c64ff9fbfa019dc upstream.

UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with
led > LED_CHARGING:

[ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds]
[ 1274.663426] Write of size 8 at addr ffff88003377b2c0 by task ckb-next-daemon/5128

This happens because we were writing to the led structure before making
sure that it exists.

Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/input-leds.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/input/input-leds.c
+++ b/drivers/input/input-leds.c
@@ -88,6 +88,7 @@ static int input_leds_connect(struct inp
 			      const struct input_device_id *id)
 {
 	struct input_leds *leds;
+	struct input_led *led;
 	unsigned int num_leds;
 	unsigned int led_code;
 	int led_no;
@@ -119,14 +120,13 @@ static int input_leds_connect(struct inp
 
 	led_no = 0;
 	for_each_set_bit(led_code, dev->ledbit, LED_CNT) {
-		struct input_led *led = &leds->leds[led_no];
+		if (!input_led_info[led_code].name)
+			continue;
 
+		led = &leds->leds[led_no];
 		led->handle = &leds->handle;
 		led->code = led_code;
 
-		if (!input_led_info[led_code].name)
-			continue;
-
 		led->cdev.name = kasprintf(GFP_KERNEL, "%s::%s",
 					   dev_name(&dev->dev),
 					   input_led_info[led_code].name);

[PATCH 4.4 18/56] Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vittorio Gambaletta (VittGam) <linuxbugs@vittgam.net>

commit f372b81101e6895252298e563d634d5e44ae81e7 upstream.

This patch adds the correct platform data information for the Caroline
Chromebook, so that the mouse button does not get stuck in pressed state
after the first click.

The Samus button keymap and platform data definition are the correct
ones for Caroline, so they have been reused here.

Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Salvatore Bellizzi <lkml@seppia.net>
Tested-by: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
[dtor: adjusted vendor spelling to match shipping firmware]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/touchscreen/atmel_mxt_ts.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2523,6 +2523,15 @@ static const struct dmi_system_id mxt_dm
 		.driver_data = samus_platform_data,
 	},
 	{
+		/* Samsung Chromebook Pro */
+		.ident = "Samsung Chromebook Pro",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Caroline"),
+		},
+		.driver_data = samus_platform_data,
+	},
+	{
 		/* Other Google Chromebooks */
 		.ident = "Chromebook",
 		.matches = {

[PATCH 4.4 19/56] xfs: prevent creating negative-sized file via INSERT_RANGE

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Darrick J. Wong <darrick.wong@oracle.com>

commit 7d83fb14258b9961920cd86f0b921caaeb3ebe85 upstream.

During the "insert range" fallocate operation, i_size grows by the
specified 'len' bytes.  XFS verifies that i_size + len < s_maxbytes, as
it should.  But this comparison is done using the signed 'loff_t', and
'i_size + len' can wrap around to a negative value, causing the check to
incorrectly pass, resulting in an inode with "negative" i_size.  This is
possible on 64-bit platforms, where XFS sets s_maxbytes = LLONG_MAX.
ext4 and f2fs don't run into this because they set a smaller s_maxbytes.

Fix it by using subtraction instead.

Reproducer:
    xfs_io -f file -c "truncate $(((1<<63)-1))" -c "finsert 0 4096"

Fixes: a904b1ca5751 ("xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate")
Cc: <stable@vger.kernel.org> # v4.1+
Originally-From: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix signed integer addition overflow too]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_file.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -969,22 +969,26 @@ xfs_file_fallocate(
 		if (error)
 			goto out_unlock;
 	} else if (mode & FALLOC_FL_INSERT_RANGE) {
-		unsigned int blksize_mask = i_blocksize(inode) - 1;
+		unsigned int	blksize_mask = i_blocksize(inode) - 1;
+		loff_t		isize = i_size_read(inode);
 
-		new_size = i_size_read(inode) + len;
 		if (offset & blksize_mask || len & blksize_mask) {
 			error = -EINVAL;
 			goto out_unlock;
 		}
 
-		/* check the new inode size does not wrap through zero */
-		if (new_size > inode->i_sb->s_maxbytes) {
+		/*
+		 * New inode size must not exceed ->s_maxbytes, accounting for
+		 * possible signed overflow.
+		 */
+		if (inode->i_sb->s_maxbytes - isize < len) {
 			error = -EFBIG;
 			goto out_unlock;
 		}
+		new_size = isize + len;
 
 		/* Offset should be less than i_size */
-		if (offset >= i_size_read(inode)) {
+		if (offset >= isize) {
 			error = -EINVAL;
 			goto out_unlock;
 		}

[PATCH 4.4 20/56] RDMA/ucma: Allow resolving address w/o specifying source address

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roland Dreier <roland@purestorage.com>

commit 09abfe7b5b2f442a85f4c4d59ecf582ad76088d7 upstream.

The RDMA CM will select a source device and address by consulting
the routing table if no source address is passed into
rdma_resolve_address().  Userspace will ask for this by passing an
all-zero source address in the RESOLVE_IP command.  Unfortunately
the new check for non-zero address size rejects this with EINVAL,
which breaks valid userspace applications.

Fix this by explicitly allowing a zero address family for the source.

Fixes: 2975d5de6428 ("RDMA/ucma: Check AF family prior resolving address")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/core/ucma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -675,7 +675,7 @@ static ssize_t ucma_resolve_ip(struct uc
 	if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
 		return -EFAULT;
 
-	if (!rdma_addr_size_in6(&cmd.src_addr) ||
+	if ((cmd.src_addr.sin6_family && !rdma_addr_size_in6(&cmd.src_addr)) ||
 	    !rdma_addr_size_in6(&cmd.dst_addr))
 		return -EINVAL;
 

[PATCH 4.4 21/56] RDMA/mlx5: Protect from shift operand overflow

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <leonro@mellanox.com>

commit 002bf2282b2d7318e444dca9ffcb994afc5d5f15 upstream.

Ensure that user didn't supply values too large that can cause overflow.

UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23
shift exponent -2147483648 is negative
CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call
Trace:
dump_stack+0xde/0x164
ubsan_epilogue+0xe/0x81
set_rq_size+0x7c2/0xa90
create_qp_common+0xc18/0x43c0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x2260
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
do_syscall_64+0x1aa/0x740
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x433569
RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569
RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003
RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8
R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000
R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006

Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx5/qp.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -231,7 +231,11 @@ static int set_rq_size(struct mlx5_ib_de
 	} else {
 		if (ucmd) {
 			qp->rq.wqe_cnt = ucmd->rq_wqe_count;
+			if (ucmd->rq_wqe_shift > BITS_PER_BYTE * sizeof(ucmd->rq_wqe_shift))
+				return -EINVAL;
 			qp->rq.wqe_shift = ucmd->rq_wqe_shift;
+			if ((1 << qp->rq.wqe_shift) / sizeof(struct mlx5_wqe_data_seg) < qp->wq_sig)
+				return -EINVAL;
 			qp->rq.max_gs = (1 << qp->rq.wqe_shift) / sizeof(struct mlx5_wqe_data_seg) - qp->wq_sig;
 			qp->rq.max_post = qp->rq.wqe_cnt;
 		} else {

[PATCH 4.4 22/56] NET: usb: qmi_wwan: add support for ublox R410M PID 0x90b2

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: SZ Lin (林上智) <sz.lin@moxa.com>

commit 9306b38e42cb266f98bff6f6f4c1c652aa79ba45 upstream.

This patch adds support for PID 0x90b2 of ublox R410M.

qmicli -d /dev/cdc-wdm0 --dms-get-manufacturer
[/dev/cdc-wdm0] Device manufacturer retrieved:
        Manufacturer: 'u-blox'

qmicli -d /dev/cdc-wdm0 --dms-get-model
[/dev/cdc-wdm0] Device model retrieved:
        Model: 'SARA-R410M-02B'

Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -631,6 +631,7 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x05c6, 0x9080, 8)},
 	{QMI_FIXED_INTF(0x05c6, 0x9083, 3)},
 	{QMI_FIXED_INTF(0x05c6, 0x9084, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x90b2, 3)},    /* ublox R410M */
 	{QMI_FIXED_INTF(0x05c6, 0x920d, 0)},
 	{QMI_FIXED_INTF(0x05c6, 0x920d, 5)},
 	{QMI_FIXED_INTF(0x0846, 0x68a2, 8)},

[PATCH 4.4 23/56] IB/mlx5: Use unlimited rate when static rate is not supported

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Danit Goldberg <danitg@mellanox.com>

commit 4f32ac2e452c2180cd2df581cbadac183e27ecd0 upstream.

Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.

Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.

Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx5/qp.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -1352,18 +1352,18 @@ enum {
 
 static int ib_rate_to_mlx5(struct mlx5_ib_dev *dev, u8 rate)
 {
-	if (rate == IB_RATE_PORT_CURRENT) {
+	if (rate == IB_RATE_PORT_CURRENT)
 		return 0;
-	} else if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_300_GBPS) {
+
+	if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_300_GBPS)
 		return -EINVAL;
-	} else {
-		while (rate != IB_RATE_2_5_GBPS &&
-		       !(1 << (rate + MLX5_STAT_RATE_OFFSET) &
-			 MLX5_CAP_GEN(dev->mdev, stat_rate_support)))
-			--rate;
-	}
 
-	return rate + MLX5_STAT_RATE_OFFSET;
+	while (rate != IB_RATE_PORT_CURRENT &&
+	       !(1 << (rate + MLX5_STAT_RATE_OFFSET) &
+		 MLX5_CAP_GEN(dev->mdev, stat_rate_support)))
+		--rate;
+
+	return rate ? rate + MLX5_STAT_RATE_OFFSET : rate;
 }
 
 static int mlx5_set_path(struct mlx5_ib_dev *dev, const struct ib_ah_attr *ah,

[PATCH 4.4 24/56] drm/vmwgfx: Fix a buffer object leak

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit 13f149d47392782baafd96d54d4e65f3b5ca342f upstream.

A buffer object leak was introduced when fixing a premature buffer
object release. Fix this.

Cc: <stable@vger.kernel.org>
Fixes: 73a88250b709 ("Fix a destoy-while-held mutex problem.")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -1991,6 +1991,7 @@ void vmw_kms_helper_resource_finish(stru
 		vmw_kms_helper_buffer_finish(res->dev_priv, NULL, ctx->buf,
 					     out_fence, NULL);
 
+	vmw_dmabuf_unreference(&ctx->buf);
 	vmw_resource_unreserve(res, false, NULL, 0);
 	mutex_unlock(&res->dev_priv->cmdbuf_mutex);
 }

[PATCH 4.4 25/56] test_firmware: fix setting old custom fw path back on exit, second try

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben.hutchings@codethink.co.uk>

commit e538409257d0217a9bc715686100a5328db75a15 upstream.

Commit 65c79230576 tried to clear the custom firmware path on exit by
writing a single space to the firmware_class.path parameter.  This
doesn't work because nothing strips this space from the value stored
and fw_get_filesystem_firmware() only ignores zero-length paths.

Instead, write a null byte.

Fixes: 0a8adf58475 ("test: add firmware_class loader test")
Fixes: 65c79230576 ("test_firmware: fix setting old custom fw path back on exit")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 tools/testing/selftests/firmware/fw_filesystem.sh |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/firmware/fw_filesystem.sh
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -29,9 +29,11 @@ test_finish()
 		echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
 	fi
 	if [ "$OLD_FWPATH" = "" ]; then
-		OLD_FWPATH=" "
+		# A zero-length write won't work; write a null byte
+		printf '\000' >/sys/module/firmware_class/parameters/path
+	else
+		echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
 	fi
-	echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
 	rm -f "$FW"
 	rmdir "$FWPATH"
 }

[PATCH 4.4 26/56] USB: serial: visor: handle potential invalid device configuration

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4842ed5bfcb9daf6660537d70503c18d38dbdbb8 upstream.

If we get an invalid device configuration from a palm 3 type device, we
might incorrectly parse things, and we have the potential to crash in
"interesting" ways.

Fix this up by verifying the size of the configuration passed to us by
the device, and only if it is correct, will we handle it.

Note that this also fixes an information leak of slab data.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: add comment about the info leak ]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/visor.c |   69 ++++++++++++++++++++++-----------------------
 1 file changed, 35 insertions(+), 34 deletions(-)

--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -338,47 +338,48 @@ static int palm_os_3_probe(struct usb_se
 		goto exit;
 	}
 
-	if (retval == sizeof(*connection_info)) {
-			connection_info = (struct visor_connection_info *)
-							transfer_buffer;
-
-		num_ports = le16_to_cpu(connection_info->num_ports);
-		for (i = 0; i < num_ports; ++i) {
-			switch (
-			   connection_info->connections[i].port_function_id) {
-			case VISOR_FUNCTION_GENERIC:
-				string = "Generic";
-				break;
-			case VISOR_FUNCTION_DEBUGGER:
-				string = "Debugger";
-				break;
-			case VISOR_FUNCTION_HOTSYNC:
-				string = "HotSync";
-				break;
-			case VISOR_FUNCTION_CONSOLE:
-				string = "Console";
-				break;
-			case VISOR_FUNCTION_REMOTE_FILE_SYS:
-				string = "Remote File System";
-				break;
-			default:
-				string = "unknown";
-				break;
-			}
-			dev_info(dev, "%s: port %d, is for %s use\n",
-				serial->type->description,
-				connection_info->connections[i].port, string);
-		}
+	if (retval != sizeof(*connection_info)) {
+		dev_err(dev, "Invalid connection information received from device\n");
+		retval = -ENODEV;
+		goto exit;
 	}
-	/*
-	* Handle devices that report invalid stuff here.
-	*/
+
+	connection_info = (struct visor_connection_info *)transfer_buffer;
+
+	num_ports = le16_to_cpu(connection_info->num_ports);
+
+	/* Handle devices that report invalid stuff here. */
 	if (num_ports == 0 || num_ports > 2) {
 		dev_warn(dev, "%s: No valid connect info available\n",
 			serial->type->description);
 		num_ports = 2;
 	}
 
+	for (i = 0; i < num_ports; ++i) {
+		switch (connection_info->connections[i].port_function_id) {
+		case VISOR_FUNCTION_GENERIC:
+			string = "Generic";
+			break;
+		case VISOR_FUNCTION_DEBUGGER:
+			string = "Debugger";
+			break;
+		case VISOR_FUNCTION_HOTSYNC:
+			string = "HotSync";
+			break;
+		case VISOR_FUNCTION_CONSOLE:
+			string = "Console";
+			break;
+		case VISOR_FUNCTION_REMOTE_FILE_SYS:
+			string = "Remote File System";
+			break;
+		default:
+			string = "unknown";
+			break;
+		}
+		dev_info(dev, "%s: port %d, is for %s use\n",
+			serial->type->description,
+			connection_info->connections[i].port, string);
+	}
 	dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
 		num_ports);
 

[PATCH 4.4 27/56] USB: Accept bulk endpoints with 1024-byte maxpacket

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit fb5ee84ea72c5f1b6cabdd1c9d6e8648995ca7c6 upstream.

Some non-compliant high-speed USB devices have bulk endpoints with a
1024-byte maxpacket size.  Although such endpoints don't work with
xHCI host controllers, they do work with EHCI controllers.  We used to
accept these invalid sizes (with a warning), but we no longer do
because of an unintentional change introduced by commit aed9d65ac327
("USB: validate wMaxPacketValue entries in endpoint descriptors").

This patch restores the old behavior, so that people with these
peculiar devices can use them without patching their kernels by hand.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Elvinas <elvinas@veikia.lt>
Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/config.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -157,7 +157,9 @@ static const unsigned short full_speed_m
 static const unsigned short high_speed_maxpacket_maxes[4] = {
 	[USB_ENDPOINT_XFER_CONTROL] = 64,
 	[USB_ENDPOINT_XFER_ISOC] = 1024,
-	[USB_ENDPOINT_XFER_BULK] = 512,
+
+	/* Bulk should be 512, but some devices use 1024: we will warn below */
+	[USB_ENDPOINT_XFER_BULK] = 1024,
 	[USB_ENDPOINT_XFER_INT] = 1024,
 };
 static const unsigned short super_speed_maxpacket_maxes[4] = {

[PATCH 4.4 28/56] USB: serial: option: reimplement interface masking

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit c3a65808f04a8426481b63a4fbd9392f009f6330 upstream.

Reimplement interface masking using device flags stored directly in the
device-id table. This will make it easier to add and maintain device-id
entries by using a more compact and readable notation compared to the
current implementation (which manages pairs of masks in separate
blacklist structs).

Two convenience macros are used to flag an interface as either reserved
or as not supporting modem-control requests:

	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
	  .driver_info = NCTRL(0) | RSVD(3) },

For now, we limit the highest maskable interface number to seven, which
allows for (up to 16) additional device flags to be added later should
need arise.

Note that this will likely need to be backported to stable in order to
make future device-id backports more manageable.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |  446 ++++++++++++++------------------------------
 1 file changed, 152 insertions(+), 294 deletions(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -551,151 +551,15 @@ static void option_instat_callback(struc
 #define WETELECOM_PRODUCT_6802			0x6802
 #define WETELECOM_PRODUCT_WMD300		0x6803
 
-struct option_blacklist_info {
-	/* bitmask of interface numbers blacklisted for send_setup */
-	const unsigned long sendsetup;
-	/* bitmask of interface numbers that are reserved */
-	const unsigned long reserved;
-};
-
-static const struct option_blacklist_info four_g_w14_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-};
-
-static const struct option_blacklist_info four_g_w100_blacklist = {
-	.sendsetup = BIT(1) | BIT(2),
-	.reserved = BIT(3),
-};
-
-static const struct option_blacklist_info alcatel_x200_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info zte_0037_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-};
-
-static const struct option_blacklist_info zte_k3765_z_blacklist = {
-	.sendsetup = BIT(0) | BIT(1) | BIT(2),
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info zte_ad3812_z_blacklist = {
-	.sendsetup = BIT(0) | BIT(1) | BIT(2),
-};
-
-static const struct option_blacklist_info zte_mc2718_z_blacklist = {
-	.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
-};
-
-static const struct option_blacklist_info zte_mc2716_z_blacklist = {
-	.sendsetup = BIT(1) | BIT(2) | BIT(3),
-};
-
-static const struct option_blacklist_info zte_me3620_mbim_blacklist = {
-	.reserved = BIT(2) | BIT(3) | BIT(4),
-};
-
-static const struct option_blacklist_info zte_me3620_xl_blacklist = {
-	.reserved = BIT(3) | BIT(4) | BIT(5),
-};
-
-static const struct option_blacklist_info zte_zm8620_x_blacklist = {
-	.reserved = BIT(3) | BIT(4) | BIT(5),
-};
-
-static const struct option_blacklist_info huawei_cdc12_blacklist = {
-	.reserved = BIT(1) | BIT(2),
-};
-
-static const struct option_blacklist_info net_intf0_blacklist = {
-	.reserved = BIT(0),
-};
-
-static const struct option_blacklist_info net_intf1_blacklist = {
-	.reserved = BIT(1),
-};
-
-static const struct option_blacklist_info net_intf2_blacklist = {
-	.reserved = BIT(2),
-};
-
-static const struct option_blacklist_info net_intf3_blacklist = {
-	.reserved = BIT(3),
-};
-
-static const struct option_blacklist_info net_intf4_blacklist = {
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info net_intf5_blacklist = {
-	.reserved = BIT(5),
-};
-
-static const struct option_blacklist_info net_intf6_blacklist = {
-	.reserved = BIT(6),
-};
-
-static const struct option_blacklist_info zte_mf626_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info zte_1255_blacklist = {
-	.reserved = BIT(3) | BIT(4),
-};
-
-static const struct option_blacklist_info simcom_sim7100e_blacklist = {
-	.reserved = BIT(5) | BIT(6),
-};
-
-static const struct option_blacklist_info telit_me910_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(3),
-};
-
-static const struct option_blacklist_info telit_me910_dual_modem_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(3),
-};
-
-static const struct option_blacklist_info telit_le910_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(2),
-};
-
-static const struct option_blacklist_info telit_le920_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(5),
-};
-
-static const struct option_blacklist_info telit_le920a4_blacklist_1 = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1),
-};
-
-static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = {
-	.sendsetup = BIT(2),
-	.reserved = BIT(0) | BIT(1) | BIT(3),
-};
 
-static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(2) | BIT(3),
-};
+/* Device flags */
 
-static const struct option_blacklist_info cinterion_rmnet2_blacklist = {
-	.reserved = BIT(4) | BIT(5),
-};
+/* Interface does not support modem-control requests */
+#define NCTRL(ifnum)	((BIT(ifnum) & 0xff) << 8)
 
-static const struct option_blacklist_info yuga_clm920_nc5_blacklist = {
-	.reserved = BIT(1) | BIT(4),
-};
+/* Interface is reserved */
+#define RSVD(ifnum)	((BIT(ifnum) & 0xff) << 0)
 
-static const struct option_blacklist_info quectel_ep06_blacklist = {
-	.reserved = BIT(4) | BIT(5),
-};
 
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -729,26 +593,26 @@ static const struct usb_device_id option
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S6, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1442, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	  .driver_info = RSVD(1) | RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	  .driver_info = RSVD(1) | RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff),	/* Huawei E1820 */
-		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	  .driver_info = RSVD(1) | RSVD(2) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x02) },
@@ -1193,67 +1057,67 @@ static const struct usb_device_id option
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, 0x6001, 0xff, 0xff, 0xff), /* 4G LTE usb-modem U901 */
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
 	/* Quectel products using Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)},
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	/* Yuga products use Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5),
-	  .driver_info = (kernel_ulong_t)&yuga_clm920_nc5_blacklist },
+	  .driver_info = RSVD(1) | RSVD(4) },
 	/* Quectel products using Quectel vendor ID */
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06),
-	  .driver_info = (kernel_ulong_t)&quectel_ep06_blacklist },
+	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6004) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6005) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_628A) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHE_628S),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_301),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628S) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_680) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_685A) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720S),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7002),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629K),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7004),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7005) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_629),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629S),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720I),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7212),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7213),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7251),
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7252),
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7253),
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
@@ -1261,38 +1125,38 @@ static const struct usb_device_id option
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1),
-		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG2),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
-		.driver_info = (kernel_ulong_t)&telit_me910_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
-		.driver_info = (kernel_ulong_t)&telit_me910_dual_modem_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
-		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
-		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(5) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1207) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1208),
-		.driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 },
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1211),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1212),
-		.driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 },
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
@@ -1308,58 +1172,58 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mf626_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff),
+	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&zte_0037_blacklist },
+	  .driver_info = NCTRL(0) | NCTRL(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0038, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0040, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0044, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0050, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0056, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0065, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
@@ -1384,26 +1248,26 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0106, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0108, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0122, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) },
@@ -1419,50 +1283,50 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
@@ -1579,23 +1443,23 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&zte_1255_blacklist },
+	  .driver_info = RSVD(3) | RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) },
@@ -1610,7 +1474,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) },
@@ -1646,17 +1510,17 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff),  /* ZTE MF91 */
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff),  /* Telewell TW-LTE 4G v2 */
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
@@ -1674,8 +1538,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1596, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1598, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1600, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff),
+	  .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
 
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
@@ -1686,20 +1550,20 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff42, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff43, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff44, 0xff, 0xff, 0xff) },
@@ -1851,19 +1715,19 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+	 .driver_info = NCTRL(1) | NCTRL(2) | NCTRL(3) | NCTRL(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+	 .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+	 .driver_info = NCTRL(1) | NCTRL(2) | NCTRL(3) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L),
-	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM),
-	 .driver_info = (kernel_ulong_t)&zte_me3620_mbim_blacklist },
+	 .driver_info = RSVD(2) | RSVD(3) | RSVD(4) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X),
-	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X),
-	 .driver_info = (kernel_ulong_t)&zte_zm8620_x_blacklist },
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
@@ -1883,37 +1747,34 @@ static const struct usb_device_id option
 	{ USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
-	  .driver_info = (kernel_ulong_t)&simcom_sim7100e_blacklist },
+	  .driver_info = RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
-	  .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
-	},
+	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
-	  .driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x0052),
-	  .driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b6),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b7),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L800MA),
-	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
-  	  .driver_info = (kernel_ulong_t)&four_g_w14_blacklist
-  	},
+	  .driver_info = NCTRL(0) | NCTRL(1) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100),
-	  .driver_info = (kernel_ulong_t)&four_g_w100_blacklist
-	},
+	  .driver_info = NCTRL(1) | NCTRL(2) | RSVD(3) },
 	{USB_DEVICE(LONGCHEER_VENDOR_ID, FUJISOFT_PRODUCT_FS040U),
-	 .driver_info = (kernel_ulong_t)&net_intf3_blacklist},
+	 .driver_info = RSVD(3)},
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9801, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9803, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
@@ -1939,14 +1800,14 @@ static const struct usb_device_id option
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_2RMNET, 0xff),
-		.driver_info = (kernel_ulong_t)&cinterion_rmnet2_blacklist },
+	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_AUDIO, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
@@ -1956,20 +1817,20 @@ static const struct usb_device_id option
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD140),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD155),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD160),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD500),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
@@ -2046,9 +1907,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, TPLINK_PRODUCT_LTE, 0xff, 0x00, 0x00) },	/* TP-Link LTE Module */
 	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, 0x9000),					/* TP-Link MA260 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) },	/* D-Link DWM-156 (variant) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) },	/* D-Link DWM-156 (variant) */
@@ -2059,9 +1920,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) },			/* D-Link DWM-158 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d0e, 0xff) },			/* D-Link DWM-157 C1 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff),			/* D-Link DWM-221 B1 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff),			/* D-Link DWM-222 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
@@ -2121,7 +1982,7 @@ static int option_probe(struct usb_seria
 	struct usb_interface_descriptor *iface_desc =
 				&serial->interface->cur_altsetting->desc;
 	struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
-	const struct option_blacklist_info *blacklist;
+	unsigned long device_flags = id->driver_info;
 
 	/* Never bind to the CD-Rom emulation interface	*/
 	if (iface_desc->bInterfaceClass == 0x08)
@@ -2132,9 +1993,7 @@ static int option_probe(struct usb_seria
 	 * the same class/subclass/protocol as the serial interfaces.  Look at
 	 * the Windows driver .INF files for reserved interface numbers.
 	 */
-	blacklist = (void *)id->driver_info;
-	if (blacklist && test_bit(iface_desc->bInterfaceNumber,
-						&blacklist->reserved))
+	if (device_flags & RSVD(iface_desc->bInterfaceNumber))
 		return -ENODEV;
 	/*
 	 * Don't bind network interface on Samsung GT-B3730, it is handled by
@@ -2145,8 +2004,8 @@ static int option_probe(struct usb_seria
 	    iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
 		return -ENODEV;
 
-	/* Store the blacklist info so we can use it during attach. */
-	usb_set_serial_data(serial, (void *)blacklist);
+	/* Store the device flags so we can use them during attach. */
+	usb_set_serial_data(serial, (void *)device_flags);
 
 	return 0;
 }
@@ -2154,22 +2013,21 @@ static int option_probe(struct usb_seria
 static int option_attach(struct usb_serial *serial)
 {
 	struct usb_interface_descriptor *iface_desc;
-	const struct option_blacklist_info *blacklist;
 	struct usb_wwan_intf_private *data;
+	unsigned long device_flags;
 
 	data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	/* Retrieve blacklist info stored at probe. */
-	blacklist = usb_get_serial_data(serial);
+	/* Retrieve device flags stored at probe. */
+	device_flags = (unsigned long)usb_get_serial_data(serial);
 
 	iface_desc = &serial->interface->cur_altsetting->desc;
 
-	if (!blacklist || !test_bit(iface_desc->bInterfaceNumber,
-						&blacklist->sendsetup)) {
+	if (!(device_flags & NCTRL(iface_desc->bInterfaceNumber)))
 		data->use_send_setup = 1;
-	}
+
 	spin_lock_init(&data->susp_lock);
 
 	usb_set_serial_data(serial, data);

[PATCH 4.4 29/56] USB: serial: option: adding support for ublox R410M

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: SZ Lin (林上智) <sz.lin@moxa.com>

commit 4205cb01f6e9ef2ae6daa7be4e8ac1edeb4c9d64 upstream.

This patch adds support for ublox R410M PID 0x90b2 USB modem to option
driver, this module supports LTE Cat M1 / NB1.

Interface layout:
0: QCDM/DIAG
1: ADB
2: AT
3: RMNET

Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -236,6 +236,8 @@ static void option_instat_callback(struc
 /* These Quectel products use Qualcomm's vendor ID */
 #define QUECTEL_PRODUCT_UC20			0x9003
 #define QUECTEL_PRODUCT_UC15			0x9090
+/* These u-blox products use Qualcomm's vendor ID */
+#define UBLOX_PRODUCT_R410M			0x90b2
 /* These Yuga products use Qualcomm's vendor ID */
 #define YUGA_PRODUCT_CLM920_NC5			0x9625
 
@@ -1068,6 +1070,9 @@ static const struct usb_device_id option
 	/* Yuga products use Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5),
 	  .driver_info = RSVD(1) | RSVD(4) },
+	/* u-blox products using Qualcomm vendor ID */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
+	  .driver_info = RSVD(1) | RSVD(3) },
 	/* Quectel products using Quectel vendor ID */
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21),
 	  .driver_info = RSVD(4) },

[PATCH 4.4 30/56] usb: musb: host: fix potential NULL pointer dereference

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bin Liu <b-liu@ti.com>

commit 2b63f1329df2cd814c1f8353fae4853ace6521d1 upstream.

musb_start_urb() doesn't check the pass-in parameter if it is NULL.  But
in musb_bulk_nak_timeout() the parameter passed to musb_start_urb() is
returned from first_qh(), which could be NULL.

So wrap the musb_start_urb() call here with a if condition check to
avoid the potential NULL pointer dereference.

Fixes: f283862f3b5c ("usb: musb: NAK timeout scheme on bulk TX endpoint")
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/musb_host.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1048,7 +1048,9 @@ static void musb_bulk_nak_timeout(struct
 			/* set tx_reinit and schedule the next qh */
 			ep->tx_reinit = 1;
 		}
-		musb_start_urb(musb, is_in, next_qh);
+
+		if (next_qh)
+			musb_start_urb(musb, is_in, next_qh);
 	}
 }
 

[PATCH 4.4 31/56] ipvs: fix rtnl_lock lockups caused by start_sync_thread

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Anastasov <ja@ssi.bg>

commit 5c64576a77894a50be80be0024bed27171b55989 upstream.

syzkaller reports for wrong rtnl_lock usage in sync code [1] and [2]

We have 2 problems in start_sync_thread if error path is
taken, eg. on memory allocation error or failure to configure
sockets for mcast group or addr/port binding:

1. recursive locking: holding rtnl_lock while calling sock_release
which in turn calls again rtnl_lock in ip_mc_drop_socket to leave
the mcast group, as noticed by Florian Westphal. Additionally,
sock_release can not be called while holding sync_mutex (ABBA
deadlock).

2. task hung: holding rtnl_lock while calling kthread_stop to
stop the running kthreads. As the kthreads do the same to leave
the mcast group (sock_release -> ip_mc_drop_socket -> rtnl_lock)
they hang.

Fix the problems by calling rtnl_unlock early in the error path,
now sock_release is called after unlocking both mutexes.

Problem 3 (task hung reported by syzkaller [2]) is variant of
problem 2: use _trylock to prevent one user to call rtnl_lock and
then while waiting for sync_mutex to block kthreads that execute
sock_release when they are stopped by stop_sync_thread.

[1]
IPVS: stopping backup sync thread 4500 ...
WARNING: possible recursive locking detected
4.16.0-rc7+ #3 Not tainted
--------------------------------------------
syzkaller688027/4497 is trying to acquire lock:
  (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

but task is already holding lock:
IPVS: stopping backup sync thread 4495 ...
  (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(rtnl_mutex);
   lock(rtnl_mutex);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

2 locks held by syzkaller688027/4497:
  #0:  (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
  #1:  (ipvs->sync_mutex){+.+.}, at: [<00000000703f78e3>]
do_ip_vs_set_ctl+0x10f8/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2388

stack backtrace:
CPU: 1 PID: 4497 Comm: syzkaller688027 Not tainted 4.16.0-rc7+ #3
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x194/0x24d lib/dump_stack.c:53
  print_deadlock_bug kernel/locking/lockdep.c:1761 [inline]
  check_deadlock kernel/locking/lockdep.c:1805 [inline]
  validate_chain kernel/locking/lockdep.c:2401 [inline]
  __lock_acquire+0xe8f/0x3e00 kernel/locking/lockdep.c:3431
  lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
  __mutex_lock_common kernel/locking/mutex.c:756 [inline]
  __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893
  mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
  rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74
  ip_mc_drop_socket+0x88/0x230 net/ipv4/igmp.c:2643
  inet_release+0x4e/0x1c0 net/ipv4/af_inet.c:413
  sock_release+0x8d/0x1e0 net/socket.c:595
  start_sync_thread+0x2213/0x2b70 net/netfilter/ipvs/ip_vs_sync.c:1924
  do_ip_vs_set_ctl+0x1139/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2389
  nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
  nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
  ip_setsockopt+0x97/0xa0 net/ipv4/ip_sockglue.c:1261
  udp_setsockopt+0x45/0x80 net/ipv4/udp.c:2406
  sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2975
  SYSC_setsockopt net/socket.c:1849 [inline]
  SyS_setsockopt+0x189/0x360 net/socket.c:1828
  do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x446a69
RSP: 002b:00007fa1c3a64da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000446a69
RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00000000006e29fc R08: 0000000000000018 R09: 0000000000000000
R10: 00000000200000c0 R11: 0000000000000246 R12: 00000000006e29f8
R13: 00676e697279656b R14: 00007fa1c3a659c0 R15: 00000000006e2b60

[2]
IPVS: sync thread started: state = BACKUP, mcast_ifn = syz_tun, syncid = 4,
id = 0
IPVS: stopping backup sync thread 25415 ...
INFO: task syz-executor7:25421 blocked for more than 120 seconds.
       Not tainted 4.16.0-rc6+ #284
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor7   D23688 25421   4408 0x00000004
Call Trace:
  context_switch kernel/sched/core.c:2862 [inline]
  __schedule+0x8fb/0x1ec0 kernel/sched/core.c:3440
  schedule+0xf5/0x430 kernel/sched/core.c:3499
  schedule_timeout+0x1a3/0x230 kernel/time/timer.c:1777
  do_wait_for_common kernel/sched/completion.c:86 [inline]
  __wait_for_common kernel/sched/completion.c:107 [inline]
  wait_for_common kernel/sched/completion.c:118 [inline]
  wait_for_completion+0x415/0x770 kernel/sched/completion.c:139
  kthread_stop+0x14a/0x7a0 kernel/kthread.c:530
  stop_sync_thread+0x3d9/0x740 net/netfilter/ipvs/ip_vs_sync.c:1996
  do_ip_vs_set_ctl+0x2b1/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2394
  nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
  nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
  ip_setsockopt+0x97/0xa0 net/ipv4/ip_sockglue.c:1253
  sctp_setsockopt+0x2ca/0x63e0 net/sctp/socket.c:4154
  sock_common_setsockopt+0x95/0xd0 net/core/sock.c:3039
  SYSC_setsockopt net/socket.c:1850 [inline]
  SyS_setsockopt+0x189/0x360 net/socket.c:1829
  do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x454889
RSP: 002b:00007fc927626c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007fc9276276d4 RCX: 0000000000454889
RDX: 000000000000048c RSI: 0000000000000000 RDI: 0000000000000017
RBP: 000000000072bf58 R08: 0000000000000018 R09: 0000000000000000
R10: 0000000020000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000051c R14: 00000000006f9b40 R15: 0000000000000001

Showing all locks held in the system:
2 locks held by khungtaskd/868:
  #0:  (rcu_read_lock){....}, at: [<00000000a1a8f002>]
check_hung_uninterruptible_tasks kernel/hung_task.c:175 [inline]
  #0:  (rcu_read_lock){....}, at: [<00000000a1a8f002>] watchdog+0x1c5/0xd60
kernel/hung_task.c:249
  #1:  (tasklist_lock){.+.+}, at: [<0000000037c2f8f9>]
debug_show_all_locks+0xd3/0x3d0 kernel/locking/lockdep.c:4470
1 lock held by rsyslogd/4247:
  #0:  (&f->f_pos_lock){+.+.}, at: [<000000000d8d6983>]
__fdget_pos+0x12b/0x190 fs/file.c:765
2 locks held by getty/4338:
  #0:  (&tty->ldisc_sem){++++}, at: [<00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
  #1:  (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4339:
  #0:  (&tty->ldisc_sem){++++}, at: [<00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
  #1:  (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4340:
  #0:  (&tty->ldisc_sem){++++}, at: [<00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
  #1:  (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4341:
  #0:  (&tty->ldisc_sem){++++}, at: [<00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
  #1:  (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4342:
  #0:  (&tty->ldisc_sem){++++}, at: [<00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
  #1:  (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4343:
  #0:  (&tty->ldisc_sem){++++}, at: [<00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
  #1:  (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4344:
  #0:  (&tty->ldisc_sem){++++}, at: [<00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
  #1:  (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
3 locks held by kworker/0:5/6494:
  #0:  ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at:
[<00000000a062b18e>] work_static include/linux/workqueue.h:198 [inline]
  #0:  ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at:
[<00000000a062b18e>] set_work_data kernel/workqueue.c:619 [inline]
  #0:  ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at:
[<00000000a062b18e>] set_work_pool_and_clear_pending kernel/workqueue.c:646
[inline]
  #0:  ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at:
[<00000000a062b18e>] process_one_work+0xb12/0x1bb0 kernel/workqueue.c:2084
  #1:  ((addr_chk_work).work){+.+.}, at: [<00000000278427d5>]
process_one_work+0xb89/0x1bb0 kernel/workqueue.c:2088
  #2:  (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
1 lock held by syz-executor7/25421:
  #0:  (ipvs->sync_mutex){+.+.}, at: [<00000000d414a689>]
do_ip_vs_set_ctl+0x277/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2393
2 locks held by syz-executor7/25427:
  #0:  (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
  #1:  (ipvs->sync_mutex){+.+.}, at: [<00000000e6d48489>]
do_ip_vs_set_ctl+0x10f8/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2388
1 lock held by syz-executor7/25435:
  #0:  (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
1 lock held by ipvs-b:2:0/25415:
  #0:  (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

Reported-and-tested-by: syzbot+a46d6abf9d56b1365a72@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+5fe074c01b2032ce9618@syzkaller.appspotmail.com
Fixes: e0b26cc997d5 ("ipvs: call rtnl_lock early")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Zubin Mithra <zsm@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/ipvs/ip_vs_ctl.c  |    8 --
 net/netfilter/ipvs/ip_vs_sync.c |  155 ++++++++++++++++++++--------------------
 2 files changed, 80 insertions(+), 83 deletions(-)

--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2352,11 +2352,7 @@ do_ip_vs_set_ctl(struct sock *sk, int cm
 			strlcpy(cfg.mcast_ifn, dm->mcast_ifn,
 				sizeof(cfg.mcast_ifn));
 			cfg.syncid = dm->syncid;
-			rtnl_lock();
-			mutex_lock(&ipvs->sync_mutex);
 			ret = start_sync_thread(ipvs, &cfg, dm->state);
-			mutex_unlock(&ipvs->sync_mutex);
-			rtnl_unlock();
 		} else {
 			mutex_lock(&ipvs->sync_mutex);
 			ret = stop_sync_thread(ipvs, dm->state);
@@ -3435,12 +3431,8 @@ static int ip_vs_genl_new_daemon(struct
 	if (ipvs->mixed_address_family_dests > 0)
 		return -EINVAL;
 
-	rtnl_lock();
-	mutex_lock(&ipvs->sync_mutex);
 	ret = start_sync_thread(ipvs, &c,
 				nla_get_u32(attrs[IPVS_DAEMON_ATTR_STATE]));
-	mutex_unlock(&ipvs->sync_mutex);
-	rtnl_unlock();
 	return ret;
 }
 
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -48,6 +48,7 @@
 #include <linux/kthread.h>
 #include <linux/wait.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 
 #include <asm/unaligned.h>		/* Used for ntoh_seq and hton_seq */
 
@@ -1356,15 +1357,9 @@ static void set_mcast_pmtudisc(struct so
 /*
  *      Specifiy default interface for outgoing multicasts
  */
-static int set_mcast_if(struct sock *sk, char *ifname)
+static int set_mcast_if(struct sock *sk, struct net_device *dev)
 {
-	struct net_device *dev;
 	struct inet_sock *inet = inet_sk(sk);
-	struct net *net = sock_net(sk);
-
-	dev = __dev_get_by_name(net, ifname);
-	if (!dev)
-		return -ENODEV;
 
 	if (sk->sk_bound_dev_if && dev->ifindex != sk->sk_bound_dev_if)
 		return -EINVAL;
@@ -1392,19 +1387,14 @@ static int set_mcast_if(struct sock *sk,
  *      in the in_addr structure passed in as a parameter.
  */
 static int
-join_mcast_group(struct sock *sk, struct in_addr *addr, char *ifname)
+join_mcast_group(struct sock *sk, struct in_addr *addr, struct net_device *dev)
 {
-	struct net *net = sock_net(sk);
 	struct ip_mreqn mreq;
-	struct net_device *dev;
 	int ret;
 
 	memset(&mreq, 0, sizeof(mreq));
 	memcpy(&mreq.imr_multiaddr, addr, sizeof(struct in_addr));
 
-	dev = __dev_get_by_name(net, ifname);
-	if (!dev)
-		return -ENODEV;
 	if (sk->sk_bound_dev_if && dev->ifindex != sk->sk_bound_dev_if)
 		return -EINVAL;
 
@@ -1419,15 +1409,10 @@ join_mcast_group(struct sock *sk, struct
 
 #ifdef CONFIG_IP_VS_IPV6
 static int join_mcast_group6(struct sock *sk, struct in6_addr *addr,
-			     char *ifname)
+			     struct net_device *dev)
 {
-	struct net *net = sock_net(sk);
-	struct net_device *dev;
 	int ret;
 
-	dev = __dev_get_by_name(net, ifname);
-	if (!dev)
-		return -ENODEV;
 	if (sk->sk_bound_dev_if && dev->ifindex != sk->sk_bound_dev_if)
 		return -EINVAL;
 
@@ -1439,24 +1424,18 @@ static int join_mcast_group6(struct sock
 }
 #endif
 
-static int bind_mcastif_addr(struct socket *sock, char *ifname)
+static int bind_mcastif_addr(struct socket *sock, struct net_device *dev)
 {
-	struct net *net = sock_net(sock->sk);
-	struct net_device *dev;
 	__be32 addr;
 	struct sockaddr_in sin;
 
-	dev = __dev_get_by_name(net, ifname);
-	if (!dev)
-		return -ENODEV;
-
 	addr = inet_select_addr(dev, 0, RT_SCOPE_UNIVERSE);
 	if (!addr)
 		pr_err("You probably need to specify IP address on "
 		       "multicast interface.\n");
 
 	IP_VS_DBG(7, "binding socket with (%s) %pI4\n",
-		  ifname, &addr);
+		  dev->name, &addr);
 
 	/* Now bind the socket with the address of multicast interface */
 	sin.sin_family	     = AF_INET;
@@ -1489,7 +1468,8 @@ static void get_mcast_sockaddr(union ipv
 /*
  *      Set up sending multicast socket over UDP
  */
-static struct socket *make_send_sock(struct netns_ipvs *ipvs, int id)
+static int make_send_sock(struct netns_ipvs *ipvs, int id,
+			  struct net_device *dev, struct socket **sock_ret)
 {
 	/* multicast addr */
 	union ipvs_sockaddr mcast_addr;
@@ -1501,9 +1481,10 @@ static struct socket *make_send_sock(str
 				  IPPROTO_UDP, &sock);
 	if (result < 0) {
 		pr_err("Error during creation of socket; terminating\n");
-		return ERR_PTR(result);
+		goto error;
 	}
-	result = set_mcast_if(sock->sk, ipvs->mcfg.mcast_ifn);
+	*sock_ret = sock;
+	result = set_mcast_if(sock->sk, dev);
 	if (result < 0) {
 		pr_err("Error setting outbound mcast interface\n");
 		goto error;
@@ -1518,7 +1499,7 @@ static struct socket *make_send_sock(str
 		set_sock_size(sock->sk, 1, result);
 
 	if (AF_INET == ipvs->mcfg.mcast_af)
-		result = bind_mcastif_addr(sock, ipvs->mcfg.mcast_ifn);
+		result = bind_mcastif_addr(sock, dev);
 	else
 		result = 0;
 	if (result < 0) {
@@ -1534,19 +1515,18 @@ static struct socket *make_send_sock(str
 		goto error;
 	}
 
-	return sock;
+	return 0;
 
 error:
-	sock_release(sock);
-	return ERR_PTR(result);
+	return result;
 }
 
 
 /*
  *      Set up receiving multicast socket over UDP
  */
-static struct socket *make_receive_sock(struct netns_ipvs *ipvs, int id,
-					int ifindex)
+static int make_receive_sock(struct netns_ipvs *ipvs, int id,
+			     struct net_device *dev, struct socket **sock_ret)
 {
 	/* multicast addr */
 	union ipvs_sockaddr mcast_addr;
@@ -1558,8 +1538,9 @@ static struct socket *make_receive_sock(
 				  IPPROTO_UDP, &sock);
 	if (result < 0) {
 		pr_err("Error during creation of socket; terminating\n");
-		return ERR_PTR(result);
+		goto error;
 	}
+	*sock_ret = sock;
 	/* it is equivalent to the REUSEADDR option in user-space */
 	sock->sk->sk_reuse = SK_CAN_REUSE;
 	result = sysctl_sync_sock_size(ipvs);
@@ -1567,7 +1548,7 @@ static struct socket *make_receive_sock(
 		set_sock_size(sock->sk, 0, result);
 
 	get_mcast_sockaddr(&mcast_addr, &salen, &ipvs->bcfg, id);
-	sock->sk->sk_bound_dev_if = ifindex;
+	sock->sk->sk_bound_dev_if = dev->ifindex;
 	result = sock->ops->bind(sock, (struct sockaddr *)&mcast_addr, salen);
 	if (result < 0) {
 		pr_err("Error binding to the multicast addr\n");
@@ -1578,21 +1559,20 @@ static struct socket *make_receive_sock(
 #ifdef CONFIG_IP_VS_IPV6
 	if (ipvs->bcfg.mcast_af == AF_INET6)
 		result = join_mcast_group6(sock->sk, &mcast_addr.in6.sin6_addr,
-					   ipvs->bcfg.mcast_ifn);
+					   dev);
 	else
 #endif
 		result = join_mcast_group(sock->sk, &mcast_addr.in.sin_addr,
-					  ipvs->bcfg.mcast_ifn);
+					  dev);
 	if (result < 0) {
 		pr_err("Error joining to the multicast group\n");
 		goto error;
 	}
 
-	return sock;
+	return 0;
 
 error:
-	sock_release(sock);
-	return ERR_PTR(result);
+	return result;
 }
 
 
@@ -1777,13 +1757,12 @@ static int sync_thread_backup(void *data
 int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 		      int state)
 {
-	struct ip_vs_sync_thread_data *tinfo;
+	struct ip_vs_sync_thread_data *tinfo = NULL;
 	struct task_struct **array = NULL, *task;
-	struct socket *sock;
 	struct net_device *dev;
 	char *name;
 	int (*threadfn)(void *data);
-	int id, count, hlen;
+	int id = 0, count, hlen;
 	int result = -ENOMEM;
 	u16 mtu, min_mtu;
 
@@ -1791,6 +1770,18 @@ int start_sync_thread(struct netns_ipvs
 	IP_VS_DBG(7, "Each ip_vs_sync_conn entry needs %Zd bytes\n",
 		  sizeof(struct ip_vs_sync_conn_v0));
 
+	/* Do not hold one mutex and then to block on another */
+	for (;;) {
+		rtnl_lock();
+		if (mutex_trylock(&ipvs->sync_mutex))
+			break;
+		rtnl_unlock();
+		mutex_lock(&ipvs->sync_mutex);
+		if (rtnl_trylock())
+			break;
+		mutex_unlock(&ipvs->sync_mutex);
+	}
+
 	if (!ipvs->sync_state) {
 		count = clamp(sysctl_sync_ports(ipvs), 1, IPVS_SYNC_PORTS_MAX);
 		ipvs->threads_mask = count - 1;
@@ -1809,7 +1800,8 @@ int start_sync_thread(struct netns_ipvs
 	dev = __dev_get_by_name(ipvs->net, c->mcast_ifn);
 	if (!dev) {
 		pr_err("Unknown mcast interface: %s\n", c->mcast_ifn);
-		return -ENODEV;
+		result = -ENODEV;
+		goto out_early;
 	}
 	hlen = (AF_INET6 == c->mcast_af) ?
 	       sizeof(struct ipv6hdr) + sizeof(struct udphdr) :
@@ -1826,26 +1818,30 @@ int start_sync_thread(struct netns_ipvs
 		c->sync_maxlen = mtu - hlen;
 
 	if (state == IP_VS_STATE_MASTER) {
+		result = -EEXIST;
 		if (ipvs->ms)
-			return -EEXIST;
+			goto out_early;
 
 		ipvs->mcfg = *c;
 		name = "ipvs-m:%d:%d";
 		threadfn = sync_thread_master;
 	} else if (state == IP_VS_STATE_BACKUP) {
+		result = -EEXIST;
 		if (ipvs->backup_threads)
-			return -EEXIST;
+			goto out_early;
 
 		ipvs->bcfg = *c;
 		name = "ipvs-b:%d:%d";
 		threadfn = sync_thread_backup;
 	} else {
-		return -EINVAL;
+		result = -EINVAL;
+		goto out_early;
 	}
 
 	if (state == IP_VS_STATE_MASTER) {
 		struct ipvs_master_sync_state *ms;
 
+		result = -ENOMEM;
 		ipvs->ms = kzalloc(count * sizeof(ipvs->ms[0]), GFP_KERNEL);
 		if (!ipvs->ms)
 			goto out;
@@ -1861,39 +1857,38 @@ int start_sync_thread(struct netns_ipvs
 	} else {
 		array = kzalloc(count * sizeof(struct task_struct *),
 				GFP_KERNEL);
+		result = -ENOMEM;
 		if (!array)
 			goto out;
 	}
 
-	tinfo = NULL;
 	for (id = 0; id < count; id++) {
-		if (state == IP_VS_STATE_MASTER)
-			sock = make_send_sock(ipvs, id);
-		else
-			sock = make_receive_sock(ipvs, id, dev->ifindex);
-		if (IS_ERR(sock)) {
-			result = PTR_ERR(sock);
-			goto outtinfo;
-		}
+		result = -ENOMEM;
 		tinfo = kmalloc(sizeof(*tinfo), GFP_KERNEL);
 		if (!tinfo)
-			goto outsocket;
+			goto out;
 		tinfo->ipvs = ipvs;
-		tinfo->sock = sock;
+		tinfo->sock = NULL;
 		if (state == IP_VS_STATE_BACKUP) {
 			tinfo->buf = kmalloc(ipvs->bcfg.sync_maxlen,
 					     GFP_KERNEL);
 			if (!tinfo->buf)
-				goto outtinfo;
+				goto out;
 		} else {
 			tinfo->buf = NULL;
 		}
 		tinfo->id = id;
+		if (state == IP_VS_STATE_MASTER)
+			result = make_send_sock(ipvs, id, dev, &tinfo->sock);
+		else
+			result = make_receive_sock(ipvs, id, dev, &tinfo->sock);
+		if (result < 0)
+			goto out;
 
 		task = kthread_run(threadfn, tinfo, name, ipvs->gen, id);
 		if (IS_ERR(task)) {
 			result = PTR_ERR(task);
-			goto outtinfo;
+			goto out;
 		}
 		tinfo = NULL;
 		if (state == IP_VS_STATE_MASTER)
@@ -1910,20 +1905,20 @@ int start_sync_thread(struct netns_ipvs
 	ipvs->sync_state |= state;
 	spin_unlock_bh(&ipvs->sync_buff_lock);
 
+	mutex_unlock(&ipvs->sync_mutex);
+	rtnl_unlock();
+
 	/* increase the module use count */
 	ip_vs_use_count_inc();
 
 	return 0;
 
-outsocket:
-	sock_release(sock);
-
-outtinfo:
-	if (tinfo) {
-		sock_release(tinfo->sock);
-		kfree(tinfo->buf);
-		kfree(tinfo);
-	}
+out:
+	/* We do not need RTNL lock anymore, release it here so that
+	 * sock_release below and in the kthreads can use rtnl_lock
+	 * to leave the mcast group.
+	 */
+	rtnl_unlock();
 	count = id;
 	while (count-- > 0) {
 		if (state == IP_VS_STATE_MASTER)
@@ -1931,13 +1926,23 @@ outtinfo:
 		else
 			kthread_stop(array[count]);
 	}
-	kfree(array);
-
-out:
 	if (!(ipvs->sync_state & IP_VS_STATE_MASTER)) {
 		kfree(ipvs->ms);
 		ipvs->ms = NULL;
 	}
+	mutex_unlock(&ipvs->sync_mutex);
+	if (tinfo) {
+		if (tinfo->sock)
+			sock_release(tinfo->sock);
+		kfree(tinfo->buf);
+		kfree(tinfo);
+	}
+	kfree(array);
+	return result;
+
+out_early:
+	mutex_unlock(&ipvs->sync_mutex);
+	rtnl_unlock();
 	return result;
 }
 

[PATCH 4.4 32/56] crypto: af_alg - fix possible uninit-value in alg_bind()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit a466856e0b7ab269cdf9461886d007e88ff575b0 upstream.

syzbot reported :

BUG: KMSAN: uninit-value in alg_bind+0xe3/0xd90 crypto/af_alg.c:162

We need to check addr_len before dereferencing sa (or uaddr)

Fixes: bb30b8848c85 ("crypto: af_alg - whitelist mask and type")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/af_alg.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -157,16 +157,16 @@ static int alg_bind(struct socket *sock,
 	void *private;
 	int err;
 
-	/* If caller uses non-allowed flag, return error. */
-	if ((sa->salg_feat & ~allowed) || (sa->salg_mask & ~allowed))
-		return -EINVAL;
-
 	if (sock->state == SS_CONNECTED)
 		return -EINVAL;
 
 	if (addr_len != sizeof(*sa))
 		return -EINVAL;
 
+	/* If caller uses non-allowed flag, return error. */
+	if ((sa->salg_feat & ~allowed) || (sa->salg_mask & ~allowed))
+		return -EINVAL;
+
 	sa->salg_type[sizeof(sa->salg_type) - 1] = 0;
 	sa->salg_name[sizeof(sa->salg_name) - 1] = 0;
 

[PATCH 4.4 33/56] netlink: fix uninit-value in netlink_sendmsg

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit 6091f09c2f79730d895149bcfe3d66140288cd0e upstream.

syzbot reported :

BUG: KMSAN: uninit-value in ffs arch/x86/include/asm/bitops.h:432 [inline]
BUG: KMSAN: uninit-value in netlink_sendmsg+0xb26/0x1310 net/netlink/af_netlink.c:1851

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netlink/af_netlink.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1795,6 +1795,8 @@ static int netlink_sendmsg(struct socket
 
 	if (msg->msg_namelen) {
 		err = -EINVAL;
+		if (msg->msg_namelen < sizeof(struct sockaddr_nl))
+			goto out;
 		if (addr->nl_family != AF_NETLINK)
 			goto out;
 		dst_portid = addr->nl_pid;

[PATCH 4.4 34/56] net: fix rtnh_ok()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit b1993a2de12c9e75c35729e2ffbc3a92d50c0d31 upstream.

syzbot reported :

BUG: KMSAN: uninit-value in rtnh_ok include/net/nexthop.h:11 [inline]
BUG: KMSAN: uninit-value in fib_count_nexthops net/ipv4/fib_semantics.c:469 [inline]
BUG: KMSAN: uninit-value in fib_create_info+0x554/0x8d20 net/ipv4/fib_semantics.c:1091

@remaining is an integer, coming from user space.
If it is negative we want rtnh_ok() to return false.

Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/nexthop.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/net/nexthop.h
+++ b/include/net/nexthop.h
@@ -6,7 +6,7 @@
 
 static inline int rtnh_ok(const struct rtnexthop *rtnh, int remaining)
 {
-	return remaining >= sizeof(*rtnh) &&
+	return remaining >= (int)sizeof(*rtnh) &&
 	       rtnh->rtnh_len >= sizeof(*rtnh) &&
 	       rtnh->rtnh_len <= remaining;
 }

[PATCH 4.4 35/56] net: initialize skb->peeked when cloning

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit b13dda9f9aa7caceeee61c080c2e544d5f5d85e5 upstream.

syzbot reported __skb_try_recv_from_queue() was using skb->peeked
while it was potentially unitialized.

We need to clear it in __skb_clone()

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/skbuff.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -827,6 +827,7 @@ static struct sk_buff *__skb_clone(struc
 	n->hdr_len = skb->nohdr ? skb_headroom(skb) : skb->hdr_len;
 	n->cloned = 1;
 	n->nohdr = 0;
+	n->peeked = 0;
 	n->destructor = NULL;
 	C(tail);
 	C(end);

[PATCH 4.4 36/56] net: fix uninit-value in __hw_addr_add_ex()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit 77d36398d99f2565c0a8d43a86fd520a82e64bb8 upstream.

syzbot complained :

BUG: KMSAN: uninit-value in memcmp+0x119/0x180 lib/string.c:861
CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
 memcmp+0x119/0x180 lib/string.c:861
 __hw_addr_add_ex net/core/dev_addr_lists.c:60 [inline]
 __dev_mc_add+0x1c2/0x8e0 net/core/dev_addr_lists.c:670
 dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687
 igmp6_group_added+0x2db/0xa00 net/ipv6/mcast.c:662
 ipv6_dev_mc_inc+0xe9e/0x1130 net/ipv6/mcast.c:914
 addrconf_join_solict net/ipv6/addrconf.c:2078 [inline]
 addrconf_dad_begin net/ipv6/addrconf.c:3828 [inline]
 addrconf_dad_work+0x427/0x2150 net/ipv6/addrconf.c:3954
 process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2113
 worker_thread+0x113c/0x24f0 kernel/workqueue.c:2247
 kthread+0x539/0x720 kernel/kthread.c:239

Fixes: f001fde5eadd ("net: introduce a list of device addresses dev_addr_list (v6)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/dev_addr_lists.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/core/dev_addr_lists.c
+++ b/net/core/dev_addr_lists.c
@@ -57,8 +57,8 @@ static int __hw_addr_add_ex(struct netde
 		return -EINVAL;
 
 	list_for_each_entry(ha, &list->list, list) {
-		if (!memcmp(ha->addr, addr, addr_len) &&
-		    ha->type == addr_type) {
+		if (ha->type == addr_type &&
+		    !memcmp(ha->addr, addr, addr_len)) {
 			if (global) {
 				/* check if addr is already used as global */
 				if (ha->global_use)

[PATCH 4.4 37/56] dccp: initialize ireq->ir_mark

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit b855ff827476adbdc2259e9895681d82b7b26065 upstream.

syzbot reported an uninit-value read of skb->mark in iptable_mangle_hook()

Thanks to the nice report, I tracked the problem to dccp not caring
of ireq->ir_mark for passive sessions.

BUG: KMSAN: uninit-value in ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline]
BUG: KMSAN: uninit-value in iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84
CPU: 0 PID: 5300 Comm: syz-executor3 Not tainted 4.16.0+ #81
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
 ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline]
 iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84
 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
 nf_hook_slow+0x158/0x3d0 net/netfilter/core.c:483
 nf_hook include/linux/netfilter.h:243 [inline]
 __ip_local_out net/ipv4/ip_output.c:113 [inline]
 ip_local_out net/ipv4/ip_output.c:122 [inline]
 ip_queue_xmit+0x1d21/0x21c0 net/ipv4/ip_output.c:504
 dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142
 dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281
 dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363
 dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818
 inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
 sock_sendmsg_nosec net/socket.c:630 [inline]
 sock_sendmsg net/socket.c:640 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
 __sys_sendmsg net/socket.c:2080 [inline]
 SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
 SyS_sendmsg+0x54/0x80 net/socket.c:2087
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x455259
RSP: 002b:00007f1a4473dc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f1a4473e6d4 RCX: 0000000000455259
RDX: 0000000000000000 RSI: 0000000020b76fc8 RDI: 0000000000000015
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000004f0 R14: 00000000006fa720 R15: 0000000000000000

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
 kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
 ip_queue_xmit+0x1e35/0x21c0 net/ipv4/ip_output.c:502
 dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142
 dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281
 dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363
 dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818
 inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
 sock_sendmsg_nosec net/socket.c:630 [inline]
 sock_sendmsg net/socket.c:640 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
 __sys_sendmsg net/socket.c:2080 [inline]
 SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
 SyS_sendmsg+0x54/0x80 net/socket.c:2087
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
 kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
 inet_csk_clone_lock+0x503/0x580 net/ipv4/inet_connection_sock.c:797
 dccp_create_openreq_child+0x7f/0x890 net/dccp/minisocks.c:92
 dccp_v4_request_recv_sock+0x22c/0xe90 net/dccp/ipv4.c:408
 dccp_v6_request_recv_sock+0x290/0x2000 net/dccp/ipv6.c:414
 dccp_check_req+0x7b9/0x8f0 net/dccp/minisocks.c:197
 dccp_v4_rcv+0x12e4/0x2630 net/dccp/ipv4.c:840
 ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257
 dst_input include/net/dst.h:449 [inline]
 ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493
 __netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562
 __netif_receive_skb net/core/dev.c:4627 [inline]
 process_backlog+0x62d/0xe20 net/core/dev.c:5307
 napi_poll net/core/dev.c:5705 [inline]
 net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771
 __do_softirq+0x56d/0x93d kernel/softirq.c:285
Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
 kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756
 reqsk_alloc include/net/request_sock.h:88 [inline]
 inet_reqsk_alloc+0xc4/0x7f0 net/ipv4/tcp_input.c:6145
 dccp_v4_conn_request+0x5cc/0x1770 net/dccp/ipv4.c:600
 dccp_v6_conn_request+0x299/0x1880 net/dccp/ipv6.c:317
 dccp_rcv_state_process+0x2ea/0x2410 net/dccp/input.c:612
 dccp_v4_do_rcv+0x229/0x340 net/dccp/ipv4.c:682
 dccp_v6_do_rcv+0x16d/0x1220 net/dccp/ipv6.c:578
 sk_backlog_rcv include/net/sock.h:908 [inline]
 __sk_receive_skb+0x60e/0xf20 net/core/sock.c:513
 dccp_v4_rcv+0x24d4/0x2630 net/dccp/ipv4.c:874
 ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257
 dst_input include/net/dst.h:449 [inline]
 ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493
 __netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562
 __netif_receive_skb net/core/dev.c:4627 [inline]
 process_backlog+0x62d/0xe20 net/core/dev.c:5307
 napi_poll net/core/dev.c:5705 [inline]
 net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771
 __do_softirq+0x56d/0x93d kernel/softirq.c:285

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/dccp/ipv4.c |    1 +
 net/dccp/ipv6.c |    1 +
 2 files changed, 2 insertions(+)

--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -618,6 +618,7 @@ int dccp_v4_conn_request(struct sock *sk
 	ireq = inet_rsk(req);
 	sk_rcv_saddr_set(req_to_sk(req), ip_hdr(skb)->daddr);
 	sk_daddr_set(req_to_sk(req), ip_hdr(skb)->saddr);
+	ireq->ir_mark = inet_request_mark(sk, skb);
 	ireq->ireq_family = AF_INET;
 	ireq->ir_iif = sk->sk_bound_dev_if;
 
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -345,6 +345,7 @@ static int dccp_v6_conn_request(struct s
 	ireq->ir_v6_rmt_addr = ipv6_hdr(skb)->saddr;
 	ireq->ir_v6_loc_addr = ipv6_hdr(skb)->daddr;
 	ireq->ireq_family = AF_INET6;
+	ireq->ir_mark = inet_request_mark(sk, skb);
 
 	if (ipv6_opt_accepted(sk, skb, IP6CB(skb)) ||
 	    np->rxopt.bits.rxinfo || np->rxopt.bits.rxoinfo ||

[PATCH 4.4 38/56] soreuseport: initialise timewait reuseport field

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit 3099a52918937ab86ec47038ad80d377ba16c531 upstream.

syzbot reported an uninit-value in inet_csk_bind_conflict() [1]

It turns out we never propagated sk->sk_reuseport into timewait socket.

[1]
BUG: KMSAN: uninit-value in inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151
CPU: 1 PID: 3589 Comm: syzkaller008242 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
 inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151
 inet_csk_get_port+0x1d28/0x1e40 net/ipv4/inet_connection_sock.c:320
 inet6_bind+0x121c/0x1820 net/ipv6/af_inet6.c:399
 SYSC_bind+0x3f2/0x4b0 net/socket.c:1474
 SyS_bind+0x54/0x80 net/socket.c:1460
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4416e9
RSP: 002b:00007ffce6d15c88 EFLAGS: 00000217 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 0100000000000000 RCX: 00000000004416e9
RDX: 000000000000001c RSI: 0000000020402000 RDI: 0000000000000004
RBP: 0000000000000000 R08: 00000000e6d15e08 R09: 00000000e6d15e08
R10: 0000000000000004 R11: 0000000000000217 R12: 0000000000009478
R13: 00000000006cd448 R14: 0000000000000000 R15: 0000000000000000

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
 kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
 tcp_time_wait+0xf17/0xf50 net/ipv4/tcp_minisocks.c:283
 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003
 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331
 sk_backlog_rcv include/net/sock.h:908 [inline]
 __release_sock+0x2d6/0x680 net/core/sock.c:2271
 release_sock+0x97/0x2a0 net/core/sock.c:2786
 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269
 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427
 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435
 sock_release net/socket.c:595 [inline]
 sock_close+0xe0/0x300 net/socket.c:1149
 __fput+0x49e/0xa10 fs/file_table.c:209
 ____fput+0x37/0x40 fs/file_table.c:243
 task_work_run+0x243/0x2c0 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x10e1/0x38d0 kernel/exit.c:867
 do_group_exit+0x1a0/0x360 kernel/exit.c:970
 SYSC_exit_group+0x21/0x30 kernel/exit.c:981
 SyS_exit_group+0x25/0x30 kernel/exit.c:979
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
 kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
 inet_twsk_alloc+0xaef/0xc00 net/ipv4/inet_timewait_sock.c:182
 tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258
 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003
 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331
 sk_backlog_rcv include/net/sock.h:908 [inline]
 __release_sock+0x2d6/0x680 net/core/sock.c:2271
 release_sock+0x97/0x2a0 net/core/sock.c:2786
 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269
 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427
 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435
 sock_release net/socket.c:595 [inline]
 sock_close+0xe0/0x300 net/socket.c:1149
 __fput+0x49e/0xa10 fs/file_table.c:209
 ____fput+0x37/0x40 fs/file_table.c:243
 task_work_run+0x243/0x2c0 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x10e1/0x38d0 kernel/exit.c:867
 do_group_exit+0x1a0/0x360 kernel/exit.c:970
 SYSC_exit_group+0x21/0x30 kernel/exit.c:981
 SyS_exit_group+0x25/0x30 kernel/exit.c:979
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
 kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756
 inet_twsk_alloc+0x13b/0xc00 net/ipv4/inet_timewait_sock.c:163
 tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258
 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003
 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331
 sk_backlog_rcv include/net/sock.h:908 [inline]
 __release_sock+0x2d6/0x680 net/core/sock.c:2271
 release_sock+0x97/0x2a0 net/core/sock.c:2786
 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269
 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427
 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435
 sock_release net/socket.c:595 [inline]
 sock_close+0xe0/0x300 net/socket.c:1149
 __fput+0x49e/0xa10 fs/file_table.c:209
 ____fput+0x37/0x40 fs/file_table.c:243
 task_work_run+0x243/0x2c0 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x10e1/0x38d0 kernel/exit.c:867
 do_group_exit+0x1a0/0x360 kernel/exit.c:970
 SYSC_exit_group+0x21/0x30 kernel/exit.c:981
 SyS_exit_group+0x25/0x30 kernel/exit.c:979
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: da5e36308d9f ("soreuseport: TCP/IPv4 implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/inet_timewait_sock.h |    1 +
 net/ipv4/inet_timewait_sock.c    |    1 +
 2 files changed, 2 insertions(+)

--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -55,6 +55,7 @@ struct inet_timewait_sock {
 #define tw_family		__tw_common.skc_family
 #define tw_state		__tw_common.skc_state
 #define tw_reuse		__tw_common.skc_reuse
+#define tw_reuseport		__tw_common.skc_reuseport
 #define tw_ipv6only		__tw_common.skc_ipv6only
 #define tw_bound_dev_if		__tw_common.skc_bound_dev_if
 #define tw_node			__tw_common.skc_nulls_node
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -182,6 +182,7 @@ struct inet_timewait_sock *inet_twsk_all
 		tw->tw_dport	    = inet->inet_dport;
 		tw->tw_family	    = sk->sk_family;
 		tw->tw_reuse	    = sk->sk_reuse;
+		tw->tw_reuseport    = sk->sk_reuseport;
 		tw->tw_hash	    = sk->sk_hash;
 		tw->tw_ipv6only	    = 0;
 		tw->tw_transparent  = inet->transparent;

[PATCH 4.4 39/56] perf: Remove superfluous allocation error check

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Olsa <jolsa@kernel.org>

commit bfb3d7b8b906b66551424d7636182126e1d134c8 upstream.

If the get_callchain_buffers fails to allocate the buffer it will
decrease the nr_callchain_events right away.

There's no point of checking the allocation error for
nr_callchain_events > 1. Removing that check.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: syzkaller-bugs@googlegroups.com
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20180415092352.12403-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/callchain.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

--- a/kernel/events/callchain.c
+++ b/kernel/events/callchain.c
@@ -107,14 +107,8 @@ int get_callchain_buffers(void)
 		goto exit;
 	}
 
-	if (count > 1) {
-		/* If the allocation failed, give up */
-		if (!callchain_cpus_entries)
-			err = -ENOMEM;
-		goto exit;
-	}
-
-	err = alloc_callchain_buffers();
+	if (count == 1)
+		err = alloc_callchain_buffers();
 exit:
 	if (err)
 		atomic_dec(&nr_callchain_events);

[PATCH 4.4 40/56] tcp: fix TCP_REPAIR_QUEUE bound checking

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit bf2acc943a45d2b2e8a9f1a5ddff6b6e43cc69d9 upstream.

syzbot is able to produce a nasty WARN_ON() in tcp_verify_left_out()
with following C-repro :

socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3
setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0
setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0
bind(3, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
sendto(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
	1242, MSG_FASTOPEN, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("127.0.0.1")}, 16) = 1242
setsockopt(3, SOL_TCP, TCP_REPAIR_WINDOW, "\4\0\0@+\205\0\0\377\377\0\0\377\377\377\177\0\0\0\0", 20) = 0
writev(3, [{"\270", 1}], 1)             = 1
setsockopt(3, SOL_TCP, TCP_REPAIR_OPTIONS, "\10\0\0\0\0\0\0\0\0\0\0\0|\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 386) = 0
writev(3, [{"\210v\r[\226\320t\231qwQ\204\264l\254\t\1\20\245\214p\350H\223\254;\\\37\345\307p$"..., 3144}], 1) = 3144

The 3rd system call looks odd :
setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0

This patch makes sure bound checking is using an unsigned compare.

Fixes: ee9952831cfd ("tcp: Initial repair mode")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/tcp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2450,7 +2450,7 @@ static int do_tcp_setsockopt(struct sock
 	case TCP_REPAIR_QUEUE:
 		if (!tp->repair)
 			err = -EPERM;
-		else if (val < TCP_QUEUES_NR)
+		else if ((unsigned int)val < TCP_QUEUES_NR)
 			tp->repair_queue = val;
 		else
 			err = -EINVAL;

[PATCH 4.4 41/56] bdi: Fix oops in wb_workfn()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit b8b784958eccbf8f51ebeee65282ca3fd59ea391 upstream.

Syzbot has reported that it can hit a NULL pointer dereference in
wb_workfn() due to wb->bdi->dev being NULL. This indicates that
wb_workfn() was called for an already unregistered bdi which should not
happen as wb_shutdown() called from bdi_unregister() should make sure
all pending writeback works are completed before bdi is unregistered.
Except that wb_workfn() itself can requeue the work with:

	mod_delayed_work(bdi_wq, &wb->dwork, 0);

and if this happens while wb_shutdown() is waiting in:

	flush_delayed_work(&wb->dwork);

the dwork can get executed after wb_shutdown() has finished and
bdi_unregister() has cleared wb->bdi->dev.

Make wb_workfn() use wakeup_wb() for requeueing the work which takes all
the necessary precautions against racing with bdi unregistration.

CC: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
CC: Tejun Heo <tj@kernel.org>
Fixes: 839a8e8660b6777e7fe4e80af1a048aebe2b5977
Reported-by: syzbot <syzbot+9873874c735f2892e7e9@syzkaller.appspotmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/fs-writeback.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -1906,7 +1906,7 @@ void wb_workfn(struct work_struct *work)
 	}
 
 	if (!list_empty(&wb->work_list))
-		mod_delayed_work(bdi_wq, &wb->dwork, 0);
+		wb_wakeup(wb);
 	else if (wb_has_dirty_io(wb) && dirty_writeback_interval)
 		wb_wakeup_delayed(wb);
 

[PATCH 4.4 42/56] f2fs: fix a dead loop in f2fs_fiemap()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Fang <fangwei1@huawei.com>

commit b86e33075ed1909d8002745b56ecf73b833db143 upstream.

A dead loop can be triggered in f2fs_fiemap() using the test case
as below:

	...
	fd = open();
	fallocate(fd, 0, 0, 4294967296);
	ioctl(fd, FS_IOC_FIEMAP, fiemap_buf);
	...

It's caused by an overflow in __get_data_block():
	...
	bh->b_size = map.m_len << inode->i_blkbits;
	...
map.m_len is an unsigned int, and bh->b_size is a size_t which is 64 bits
on 64 bits archtecture, type conversion from an unsigned int to a size_t
will result in an overflow.

In the above-mentioned case, bh->b_size will be zero, and f2fs_fiemap()
will call get_data_block() at block 0 again an again.

Fix this by adding a force conversion before left shift.

Signed-off-by: Wei Fang <fangwei1@huawei.com>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/f2fs/data.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -721,7 +721,7 @@ static int __get_data_block(struct inode
 	if (!ret) {
 		map_bh(bh, inode->i_sb, map.m_pblk);
 		bh->b_state = (bh->b_state & ~F2FS_MAP_FLAGS) | map.m_flags;
-		bh->b_size = map.m_len << inode->i_blkbits;
+		bh->b_size = (u64)map.m_len << inode->i_blkbits;
 	}
 	return ret;
 }

[PATCH 4.4 43/56] xfrm_user: fix return value from xfrm_user_rcv_msg

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yi Zhao <yi.zhao@windriver.com>

commit 83e2d0587ae859aae75fd9d246c409b10a6bd137 upstream.

It doesn't support to run 32bit 'ip' to set xfrm objdect on 64bit host.
But the return value is unknown for user program:

ip xfrm policy list
RTNETLINK answers: Unknown error 524

Replace ENOTSUPP with EOPNOTSUPP:

ip xfrm policy list
RTNETLINK answers: Operation not supported

Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Nathan Harold <nharold@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xfrm/xfrm_user.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -2480,7 +2480,7 @@ static int xfrm_user_rcv_msg(struct sk_b
 
 #ifdef CONFIG_COMPAT
 	if (is_compat_task())
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 #endif
 
 	type = nlh->nlmsg_type;

[PATCH 4.4 44/56] rfkill: gpio: fix memory leak in probe error path

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 4bf01ca21e2e0e4561d1a03c48c3d740418702db upstream.

Make sure to free the rfkill device in case registration fails during
probe.

Fixes: 5e7ca3937fbe ("net: rfkill: gpio: convert to resource managed allocation")
Cc: stable <stable@vger.kernel.org>	# 3.13
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/rfkill/rfkill-gpio.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/net/rfkill/rfkill-gpio.c
+++ b/net/rfkill/rfkill-gpio.c
@@ -140,13 +140,18 @@ static int rfkill_gpio_probe(struct plat
 
 	ret = rfkill_register(rfkill->rfkill_dev);
 	if (ret < 0)
-		return ret;
+		goto err_destroy;
 
 	platform_set_drvdata(pdev, rfkill);
 
 	dev_info(&pdev->dev, "%s device registered.\n", rfkill->name);
 
 	return 0;
+
+err_destroy:
+	rfkill_destroy(rfkill->rfkill_dev);
+
+	return ret;
 }
 
 static int rfkill_gpio_remove(struct platform_device *pdev)

[PATCH 4.4 45/56] libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 184add2ca23ce5edcac0ab9c3b9be13f91e7b567 upstream.

Richard Jones has reported that using med_power_with_dipm on a T450s
with a Sandisk SD7UB3Q256G1001 SSD (firmware version X2180501) is
causing the machine to hang.

Switching the LPM to max_performance fixes this, so it seems that
this Sandisk SSD does not handle LPM well.

Note in the past there have been bug-reports about the following
Sandisk models not working with min_power, so we may need to extend
the quirk list in the future: name - firmware
Sandisk SD6SB2M512G1022I   - X210400
Sandisk SD6PP4M-256G-1006  - A200906

Cc: stable@vger.kernel.org
Cc: Richard W.M. Jones <rjones@redhat.com>
Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4243,6 +4243,9 @@ static const struct ata_blacklist_entry
 						ATA_HORKAGE_ZERO_AFTER_TRIM |
 						ATA_HORKAGE_NOLPM, },
 
+	/* Sandisk devices which are known to not handle LPM well */
+	{ "SanDisk SD7UB3Q*G1001",	NULL,	ATA_HORKAGE_NOLPM, },
+
 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500_*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },

[PATCH 4.4 46/56] tracing: Fix regex_match_front() to not over compare the test string

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit dc432c3d7f9bceb3de6f5b44fb9c657c9810ed6d upstream.

The regex match function regex_match_front() in the tracing filter logic,
was fixed to test just the pattern length from testing the entire test
string. That is, it went from strncmp(str, r->pattern, len) to
strcmp(str, r->pattern, r->len).

The issue is that str is not guaranteed to be nul terminated, and if r->len
is greater than the length of str, it can access more memory than is
allocated.

The solution is to add a simple test if (len < r->len) return 0.

Cc: stable@vger.kernel.org
Fixes: 285caad415f45 ("tracing/filters: Fix MATCH_FRONT_ONLY filter matching")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace_events_filter.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -322,6 +322,9 @@ static int regex_match_full(char *str, s
 
 static int regex_match_front(char *str, struct regex *r, int len)
 {
+	if (len < r->len)
+		return 0;
+
 	if (strncmp(str, r->pattern, r->len) == 0)
 		return 1;
 	return 0;

[PATCH 4.4 47/56] can: kvaser_usb: Increase correct stats counter in kvaser_usb_rx_can_msg()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jimmy Assarsson <extja@kvaser.com>

commit 6ee00865ffe4e8c8ba4a68d26db53c7ec09bbb89 upstream.

Increase rx_dropped, if alloc_can_skb() fails, not tx_dropped.

Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/usb/kvaser_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -1175,7 +1175,7 @@ static void kvaser_usb_rx_can_msg(const
 
 	skb = alloc_can_skb(priv->netdev, &cf);
 	if (!skb) {
-		stats->tx_dropped++;
+		stats->rx_dropped++;
 		return;
 	}
 

[PATCH 4.4 48/56] net: atm: Fix potential Spectre v1

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit acf784bd0ce257fe43da7ca266f7a10b837479d2 upstream.

ioc_data.dev_num can be controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:
net/atm/lec.c:702 lec_vcc_attach() warn: potential spectre issue
'dev_lec'

Fix this by sanitizing ioc_data.dev_num before using it to index
dev_lec. Also, notice that there is another instance in which array
dev_lec is being indexed using ioc_data.dev_num at line 705:
lec_vcc_added(netdev_priv(dev_lec[ioc_data.dev_num]),

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/atm/lec.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -41,6 +41,9 @@ static unsigned char bridge_ula_lec[] =
 #include <linux/module.h>
 #include <linux/init.h>
 
+/* Hardening for Spectre-v1 */
+#include <linux/nospec.h>
+
 #include "lec.h"
 #include "lec_arpc.h"
 #include "resources.h"
@@ -697,8 +700,10 @@ static int lec_vcc_attach(struct atm_vcc
 	bytes_left = copy_from_user(&ioc_data, arg, sizeof(struct atmlec_ioc));
 	if (bytes_left != 0)
 		pr_info("copy from user failed for %d bytes\n", bytes_left);
-	if (ioc_data.dev_num < 0 || ioc_data.dev_num >= MAX_LEC_ITF ||
-	    !dev_lec[ioc_data.dev_num])
+	if (ioc_data.dev_num < 0 || ioc_data.dev_num >= MAX_LEC_ITF)
+		return -EINVAL;
+	ioc_data.dev_num = array_index_nospec(ioc_data.dev_num, MAX_LEC_ITF);
+	if (!dev_lec[ioc_data.dev_num])
 		return -EINVAL;
 	vpriv = kmalloc(sizeof(struct lec_vcc_priv), GFP_KERNEL);
 	if (!vpriv)

[PATCH 4.4 49/56] atm: zatm: Fix potential Spectre v1

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 2be147f7459db5bbf292e0a6f135037b55e20b39 upstream.

pool can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/atm/zatm.c:1462 zatm_ioctl() warn: potential spectre issue
'zatm_dev->pool_info' (local cap)

Fix this by sanitizing pool before using it to index
zatm_dev->pool_info

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/atm/zatm.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -23,6 +23,7 @@
 #include <linux/bitops.h>
 #include <linux/wait.h>
 #include <linux/slab.h>
+#include <linux/nospec.h>
 #include <asm/byteorder.h>
 #include <asm/string.h>
 #include <asm/io.h>
@@ -1456,6 +1457,8 @@ static int zatm_ioctl(struct atm_dev *de
 					return -EFAULT;
 				if (pool < 0 || pool > ZATM_LAST_POOL)
 					return -EINVAL;
+				pool = array_index_nospec(pool,
+							  ZATM_LAST_POOL + 1);
 				spin_lock_irqsave(&zatm_dev->lock, flags);
 				info = zatm_dev->pool_info[pool];
 				if (cmd == ZATM_GETPOOLZ) {

[PATCH 4.4 50/56] Revert "Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174"

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 544a591668813583021474fa5c7ff4942244d654 upstream.

Commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros
1525/QCA6174") is causing bluetooth to no longer work for several
people, see: https://bugzilla.redhat.com/show_bug.cgi?id=1568911

So lets revert it for now and try to find another solution for
devices which need the modified quirk.

Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/btusb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -216,6 +216,7 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
@@ -246,7 +247,6 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
 
 	/* QCA ROME chipset */
-	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },

[PATCH 4.4 51/56] tracing/uprobe_event: Fix strncpy corner case

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

commit 50268a3d266ecfdd6c5873d62b2758d9732fc598 upstream.

Fix string fetch function to terminate with NUL.
It is OK to drop the rest of string.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: security@kernel.org
Cc: 范龙飞 <long7573@126.com>
Fixes: 5baaa59ef09e ("tracing/probes: Implement 'memory' fetch method for uprobes")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace_uprobe.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -149,6 +149,8 @@ static void FETCH_FUNC_NAME(memory, stri
 		return;
 
 	ret = strncpy_from_user(dst, src, maxlen);
+	if (ret == maxlen)
+		dst[--ret] = '\0';
 
 	if (ret < 0) {	/* Failed to fetch string */
 		((u8 *)get_rloc_data(dest))[0] = '\0';

[PATCH 4.4 52/56] perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit ef9ee4ad38445a30909c48998624861716f2a994 upstream.

> arch/x86/events/core.c:319 set_ext_hw_attr() warn: potential spectre issue 'hw_cache_event_ids[cache_type]' (local cap)
> arch/x86/events/core.c:319 set_ext_hw_attr() warn: potential spectre issue 'hw_cache_event_ids' (local cap)
> arch/x86/events/core.c:328 set_ext_hw_attr() warn: potential spectre issue 'hw_cache_extra_regs[cache_type]' (local cap)
> arch/x86/events/core.c:328 set_ext_hw_attr() warn: potential spectre issue 'hw_cache_extra_regs' (local cap)

Userspace controls @config which contains 3 (byte) fields used for a 3
dimensional array deref.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/perf_event.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -297,17 +297,20 @@ set_ext_hw_attr(struct hw_perf_event *hw
 
 	config = attr->config;
 
-	cache_type = (config >>  0) & 0xff;
+	cache_type = (config >> 0) & 0xff;
 	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
 		return -EINVAL;
+	cache_type = array_index_nospec(cache_type, PERF_COUNT_HW_CACHE_MAX);
 
 	cache_op = (config >>  8) & 0xff;
 	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
 		return -EINVAL;
+	cache_op = array_index_nospec(cache_op, PERF_COUNT_HW_CACHE_OP_MAX);
 
 	cache_result = (config >> 16) & 0xff;
 	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
 		return -EINVAL;
+	cache_result = array_index_nospec(cache_result, PERF_COUNT_HW_CACHE_RESULT_MAX);
 
 	val = hw_cache_event_ids[cache_type][cache_op][cache_result];
 

[PATCH 4.4 53/56] perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit a5f81290ce475489fa2551c01a07470c1a4c932e upstream.

> arch/x86/events/intel/cstate.c:307 cstate_pmu_event_init() warn: potential spectre issue 'pkg_msr' (local cap)

Userspace controls @attr, sanitize cfg (attr->config) before using it
to index an array.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/perf_event_intel_cstate.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/x86/kernel/cpu/perf_event_intel_cstate.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_cstate.c
@@ -88,6 +88,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/perf_event.h>
+#include <linux/nospec.h>
 #include <asm/cpu_device_id.h>
 #include "perf_event.h"
 
@@ -409,6 +410,7 @@ static int cstate_pmu_event_init(struct
 	} else if (event->pmu == &cstate_pkg_pmu) {
 		if (cfg >= PERF_CSTATE_PKG_EVENT_MAX)
 			return -EINVAL;
+		cfg = array_index_nospec((unsigned long)cfg, PERF_CSTATE_PKG_EVENT_MAX);
 		if (!pkg_msr[cfg].attr)
 			return -EINVAL;
 		event->hw.event_base = pkg_msr[cfg].msr;

[PATCH 4.4 54/56] perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit 06ce6e9b6d6c09d4129c6e24a1314a395d816c10 upstream.

> arch/x86/events/msr.c:178 msr_event_init() warn: potential spectre issue 'msr' (local cap)

Userspace controls @attr, sanitize cfg (attr->config) before using it
to index an array.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/perf_event_msr.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/cpu/perf_event_msr.c
+++ b/arch/x86/kernel/cpu/perf_event_msr.c
@@ -1,4 +1,5 @@
 #include <linux/perf_event.h>
+#include <linux/nospec.h>
 
 enum perf_msr_id {
 	PERF_MSR_TSC			= 0,
@@ -115,9 +116,6 @@ static int msr_event_init(struct perf_ev
 	if (event->attr.type != event->pmu->type)
 		return -ENOENT;
 
-	if (cfg >= PERF_MSR_EVENT_MAX)
-		return -EINVAL;
-
 	/* unsupported modes and filters */
 	if (event->attr.exclude_user   ||
 	    event->attr.exclude_kernel ||
@@ -128,6 +126,11 @@ static int msr_event_init(struct perf_ev
 	    event->attr.sample_period) /* no sampling */
 		return -EINVAL;
 
+	if (cfg >= PERF_MSR_EVENT_MAX)
+		return -EINVAL;
+
+	cfg = array_index_nospec((unsigned long)cfg, PERF_MSR_EVENT_MAX);
+
 	if (!msr[cfg].attr)
 		return -EINVAL;
 

[PATCH 4.4 55/56] perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit 4411ec1d1993e8dbff2898390e3fed280d88e446 upstream.

> kernel/events/ring_buffer.c:871 perf_mmap_to_page() warn: potential spectre issue 'rb->aux_pages'

Userspace controls @pgoff through the fault address. Sanitize the
array index before doing the array dereference.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/ring_buffer.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/circ_buf.h>
 #include <linux/poll.h>
+#include <linux/nospec.h>
 
 #include "internal.h"
 
@@ -779,8 +780,10 @@ perf_mmap_to_page(struct ring_buffer *rb
 			return NULL;
 
 		/* AUX space */
-		if (pgoff >= rb->aux_pgoff)
-			return virt_to_page(rb->aux_pages[pgoff - rb->aux_pgoff]);
+		if (pgoff >= rb->aux_pgoff) {
+			int aux_pgoff = array_index_nospec(pgoff - rb->aux_pgoff, rb->aux_nr_pages);
+			return virt_to_page(rb->aux_pages[aux_pgoff]);
+		}
 	}
 
 	return __perf_mmap_to_page(rb, pgoff);

[PATCH 4.4 56/56] perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit 46b1b577229a091b137831becaa0fae8690ee15a upstream.

> arch/x86/events/intel/cstate.c:307 cstate_pmu_event_init() warn: potential spectre issue 'pkg_msr' (local cap)
> arch/x86/events/intel/core.c:337 intel_pmu_event_map() warn: potential spectre issue 'intel_perfmon_event_map'
> arch/x86/events/intel/knc.c:122 knc_pmu_event_map() warn: potential spectre issue 'knc_perfmon_event_map'
> arch/x86/events/intel/p4.c:722 p4_pmu_event_map() warn: potential spectre issue 'p4_general_events'
> arch/x86/events/intel/p6.c:116 p6_pmu_event_map() warn: potential spectre issue 'p6_perfmon_event_map'
> arch/x86/events/amd/core.c:132 amd_pmu_event_map() warn: potential spectre issue 'amd_perfmon_event_map'

Userspace controls @attr, sanitize @attr->config before passing it on
to x86_pmu::event_map().

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/perf_event.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -25,6 +25,7 @@
 #include <linux/cpu.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
+#include <linux/nospec.h>
 
 #include <asm/apic.h>
 #include <asm/stacktrace.h>
@@ -407,6 +408,8 @@ int x86_setup_perfctr(struct perf_event
 	if (attr->config >= x86_pmu.max_events)
 		return -EINVAL;
 
+	attr->config = array_index_nospec((unsigned long)attr->config, x86_pmu.max_events);
+
 	/*
 	 * The generic map:
 	 */

Re: [PATCH 4.4 00/56] 4.4.132-stable review

[Nathan Chancellor]

On Mon, May 14, 2018 at 08:48:05AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.132 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed May 16 06:47:39 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.132-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Merged, compiled, and installed  on to my Pixel 2 XL and OnePlus 5.

No initial issues noticed in general usage or dmesg.

Thanks!
Nathan

Re: [PATCH 4.4 00/56] 4.4.132-stable review

[kernelci.org bot]

stable-rc/linux-4.4.y boot: 87 boots: 0 failed, 87 passed (v4.4.131-57-ge33795f7a573)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.4.y/kernel/v4.4.131-57-ge33795f7a573/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.4.y/kernel/v4.4.131-57-ge33795f7a573/

Tree: stable-rc
Branch: linux-4.4.y
Git Describe: v4.4.131-57-ge33795f7a573
Git Commit: e33795f7a573385b26763104b63355823de20e4b
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 40 unique boards, 18 SoC families, 14 builds out of 178

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.4 00/56] 4.4.132-stable review

[Guenter Roeck]

On Mon, May 14, 2018 at 08:48:05AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.132 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed May 16 06:47:39 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 146 pass: 146 fail: 0
Qemu test results:
	total: 127 pass: 127 fail: 0

Details are available at http://kerneltests.org/builders/.

Guenter

Re: [PATCH 4.4 00/56] 4.4.132-stable review

[Shuah Khan]

On 05/14/2018 12:48 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.132 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed May 16 06:47:39 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.132-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.4 00/56] 4.4.132-stable review

[Naresh Kamboju]

On 14 May 2018 at 12:18, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 4.4.132 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed May 16 06:47:39 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.132-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.4.132-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: e33795f7a573385b26763104b63355823de20e4b
git describe: v4.4.131-57-ge33795f7a573
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.131-57-ge33795f7a573


No regressions (compared to build v4.4.131-51-g9aa0dca71729)

Boards, architectures and test suites:
-------------------------------------

juno-r2 - arm64
* boot - pass: 21
* kselftest - skip: 37, pass: 29
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 53, pass: 28
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 140, pass: 1010
* ltp-timers-tests - pass: 13

qemu_x86_64
* boot - pass: 20
* kselftest - skip: 40, pass: 40
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 155, pass: 995
* ltp-timers-tests - pass: 13

x15 - arm
* boot - pass: 20
* kselftest - skip: 36, pass: 29
* libhugetlbfs - skip: 1, pass: 87
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 18, pass: 63
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 2, pass: 20
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 78, pass: 1072
* ltp-timers-tests - pass: 13

x86_64
* boot - pass: 22
* kselftest - skip: 37, pass: 41
* kselftest-vsyscall-mode-native - fail: 1, skip: 37, pass: 40
* kselftest-vsyscall-mode-none - skip: 37, pass: 41
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 5, pass: 9
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 119, pass: 1031
* ltp-timers-tests - pass: 13

Hikey board test results,

Summary
------------------------------------------------------------------------

kernel: 4.4.132-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git tag: 4.4.132-rc1-hikey-20180514-190
git commit: 36ca71c104750c04fb621d8fce5843a66a21fa88
git describe: 4.4.132-rc1-hikey-20180514-190
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.132-rc1-hikey-20180514-190

No regressions (compared to build 4.4.132-rc1-hikey-20180511-188)

Boards, architectures and test suites:
-------------------------------------

hi6220-hikey - arm64
* boot - pass: 20,
* kselftest - pass: 27, skip: 38
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 28, skip: 53
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 57, skip: 6
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 10, skip: 4
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1008, skip: 142
* ltp-timers-tests - pass: 13,

-- 
Linaro QA (BETA)
https://qa-reports.linaro.org

Re: [PATCH 4.4 08/56] ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode

[Ben Hutchings]

On Mon, 2018-05-14 at 08:48 +0200, Greg Kroah-Hartman wrote:
> 4.4-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
> 
> commit 2f38c3c01de945234d23dd163e3528ccb413066d upstream.
> 
> Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
> rx_hdr_status is not padded to align in 4-byte boundary. Define a
> new hw_params field to handle different alignment behaviour between
> different hw. This patch fixes improper retrieval of rfc1042 header
> with QCA4019. This patch along with "ath10k: Properly remove padding
> from the start of rx payload" will fix traffic failure in ethernet
> decap mode for QCA4019.
> 
> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
> Signed-off-by: Sriram R <srirrama@codeaurora.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[...]

I'm curious as to why this backport doesn't include the change to
ath10k_htt_rx_h_find_rfc1042().  I understand that the addition of the
new field is a dependency for the following patch, but shouldn't the
fix included in the upstream commit also be applied to 4.4?

Ben.

-- 
Ben Hutchings, Software Developer                         Codethink Ltd
https://www.codethink.co.uk/                 Dale House, 35 Dale Street
                                     Manchester, M1 2HF, United Kingdom

Re: [PATCH 4.4 08/56] ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode

[Sriram R]

Hi Ben,

On 2018-06-04 23:22, Ben Hutchings wrote:
> On Mon, 2018-05-14 at 08:48 +0200, Greg Kroah-Hartman wrote:
>> 4.4-stable review patch.  If anyone has any objections, please let me 
>> know.
>> 
>> ------------------
>> 
>> From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
>> 
>> commit 2f38c3c01de945234d23dd163e3528ccb413066d upstream.
>> 
>> Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
>> rx_hdr_status is not padded to align in 4-byte boundary. Define a
>> new hw_params field to handle different alignment behaviour between
>> different hw. This patch fixes improper retrieval of rfc1042 header
>> with QCA4019. This patch along with "ath10k: Properly remove padding
>> from the start of rx payload" will fix traffic failure in ethernet
>> decap mode for QCA4019.
>> 
>> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
>> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
>> Signed-off-by: Sriram R <srirrama@codeaurora.org>
>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> [...]
> 
> I'm curious as to why this backport doesn't include the change to
> ath10k_htt_rx_h_find_rfc1042().  I understand that the addition of the
> new field is a dependency for the following patch, but shouldn't the
> fix included in the upstream commit also be applied to 4.4?
> 
   Our main intention with this patchset [1] was to provide fix for 
replay detection security issue seen in ath10k driver which needed to be 
in the stable releases.

And, as per stable tree guidelines we wanted the patchset to have only 
one and this important fix .

Also we felt the change in ath10k_htt_rx_h_find_rfc1042() is currently 
not  a must-have fix in 4.4 stable tree .

[1]
https://patchwork.kernel.org/patch/10370863/
https://patchwork.kernel.org/patch/10370865/

Thanks and Regards,
Sriram.R

> Ben.

Re: [PATCH 4.4 08/56] ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode

[Ben Hutchings]

On Thu, 2018-06-07 at 17:22 +0530, Sriram R wrote:
> Hi Ben,
> 
> On 2018-06-04 23:22, Ben Hutchings wrote:
> > On Mon, 2018-05-14 at 08:48 +0200, Greg Kroah-Hartman wrote:
> > > 4.4-stable review patch.  If anyone has any objections, please let me 
> > > know.
> > > 
> > > ------------------
> > > 
> > > From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
> > > 
> > > commit 2f38c3c01de945234d23dd163e3528ccb413066d upstream.
> > > 
> > > Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
> > > rx_hdr_status is not padded to align in 4-byte boundary. Define a
> > > new hw_params field to handle different alignment behaviour between
> > > different hw. This patch fixes improper retrieval of rfc1042 header
> > > with QCA4019. This patch along with "ath10k: Properly remove padding
> > > from the start of rx payload" will fix traffic failure in ethernet
> > > decap mode for QCA4019.
> > > 
> > > Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
> > > Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
> > > Signed-off-by: Sriram R <srirrama@codeaurora.org>
> > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > 
> > [...]
> > 
> > I'm curious as to why this backport doesn't include the change to
> > ath10k_htt_rx_h_find_rfc1042().  I understand that the addition of the
> > new field is a dependency for the following patch, but shouldn't the
> > fix included in the upstream commit also be applied to 4.4?
> > 
> 
>    Our main intention with this patchset [1] was to provide fix for 
> replay detection security issue seen in ath10k driver which needed to be 
> in the stable releases.
> 
> And, as per stable tree guidelines we wanted the patchset to have only 
> one and this important fix .

OK, I think the problem here is that the rules say "must" when what's
really meant is "should".  So the rule "It must fix only one thing."
really means that commits that each make a single logical change are
strongly preferred.

It does not mean that upstream commits should be trimmed down to
conform to this.  Greg generally considers it more important to avoid
changes to the upstream commit, where possible.  Right, Greg?

And speaking only for myself, I particularly dislike stable backports
that are significantly different from the original upstream commit but
don't mention this difference in the commit message.

Ben.

> Also we felt the change in ath10k_htt_rx_h_find_rfc1042() is currently 
> not  a must-have fix in 4.4 stable tree .
> 
> [1]
> https://patchwork.kernel.org/patch/10370863/
> https://patchwork.kernel.org/patch/10370865/
> 
> Thanks and Regards,
> Sriram.R
> 
> > Ben.
> 
> 
-- 
Ben Hutchings, Software Developer                         Codethink Ltd
https://www.codethink.co.uk/                 Dale House, 35 Dale Street
                                     Manchester, M1 2HF, United Kingdom

Re: [PATCH 4.4 08/56] ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode

[Greg Kroah-Hartman]

On Thu, Jun 07, 2018 at 04:49:57PM +0100, Ben Hutchings wrote:
> On Thu, 2018-06-07 at 17:22 +0530, Sriram R wrote:
> > Hi Ben,
> > 
> > On 2018-06-04 23:22, Ben Hutchings wrote:
> > > On Mon, 2018-05-14 at 08:48 +0200, Greg Kroah-Hartman wrote:
> > > > 4.4-stable review patch.  If anyone has any objections, please let me 
> > > > know.
> > > > 
> > > > ------------------
> > > > 
> > > > From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
> > > > 
> > > > commit 2f38c3c01de945234d23dd163e3528ccb413066d upstream.
> > > > 
> > > > Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
> > > > rx_hdr_status is not padded to align in 4-byte boundary. Define a
> > > > new hw_params field to handle different alignment behaviour between
> > > > different hw. This patch fixes improper retrieval of rfc1042 header
> > > > with QCA4019. This patch along with "ath10k: Properly remove padding
> > > > from the start of rx payload" will fix traffic failure in ethernet
> > > > decap mode for QCA4019.
> > > > 
> > > > Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
> > > > Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
> > > > Signed-off-by: Sriram R <srirrama@codeaurora.org>
> > > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > 
> > > [...]
> > > 
> > > I'm curious as to why this backport doesn't include the change to
> > > ath10k_htt_rx_h_find_rfc1042().  I understand that the addition of the
> > > new field is a dependency for the following patch, but shouldn't the
> > > fix included in the upstream commit also be applied to 4.4?
> > > 
> > 
> >    Our main intention with this patchset [1] was to provide fix for 
> > replay detection security issue seen in ath10k driver which needed to be 
> > in the stable releases.
> > 
> > And, as per stable tree guidelines we wanted the patchset to have only 
> > one and this important fix .
> 
> OK, I think the problem here is that the rules say "must" when what's
> really meant is "should".  So the rule "It must fix only one thing."
> really means that commits that each make a single logical change are
> strongly preferred.
> 
> It does not mean that upstream commits should be trimmed down to
> conform to this.  Greg generally considers it more important to avoid
> changes to the upstream commit, where possible.  Right, Greg?
> 
> And speaking only for myself, I particularly dislike stable backports
> that are significantly different from the original upstream commit but
> don't mention this difference in the commit message.

I _STRONGLY_ dislike backports that are different than what is in
Linus's tree and normally I catch it when someone tries to do that.  I
missed this one here, and that's not ok on my part for missing that, and
for the authors part in doing that :(

So, what to do here, should I revert this series and take a fixed-up
one?  What exactly is the stable tree now missing because of this
mistake?

thanks,

greg k-h

Re: [PATCH 4.4 08/56] ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 3572 bytes --]

On Thu, 2018-06-07 at 18:16 +0200, Greg Kroah-Hartman wrote:
> On Thu, Jun 07, 2018 at 04:49:57PM +0100, Ben Hutchings wrote:
> > On Thu, 2018-06-07 at 17:22 +0530, Sriram R wrote:
> > > Hi Ben,
> > > 
> > > On 2018-06-04 23:22, Ben Hutchings wrote:
> > > > On Mon, 2018-05-14 at 08:48 +0200, Greg Kroah-Hartman wrote:
> > > > > 4.4-stable review patch.  If anyone has any objections, please let me 
> > > > > know.
> > > > > 
> > > > > ------------------
> > > > > 
> > > > > From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
> > > > > 
> > > > > commit 2f38c3c01de945234d23dd163e3528ccb413066d upstream.
> > > > > 
> > > > > Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
> > > > > rx_hdr_status is not padded to align in 4-byte boundary. Define a
> > > > > new hw_params field to handle different alignment behaviour between
> > > > > different hw. This patch fixes improper retrieval of rfc1042 header
> > > > > with QCA4019. This patch along with "ath10k: Properly remove padding
> > > > > from the start of rx payload" will fix traffic failure in ethernet
> > > > > decap mode for QCA4019.
> > > > > 
> > > > > Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
> > > > > Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
> > > > > Signed-off-by: Sriram R <srirrama@codeaurora.org>
> > > > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > > 
> > > > [...]
> > > > 
> > > > I'm curious as to why this backport doesn't include the change to
> > > > ath10k_htt_rx_h_find_rfc1042().  I understand that the addition of the
> > > > new field is a dependency for the following patch, but shouldn't the
> > > > fix included in the upstream commit also be applied to 4.4?
> > > > 
> > > 
> > >    Our main intention with this patchset [1] was to provide fix for 
> > > replay detection security issue seen in ath10k driver which needed to be 
> > > in the stable releases.
> > > 
> > > And, as per stable tree guidelines we wanted the patchset to have only 
> > > one and this important fix .
> > 
> > OK, I think the problem here is that the rules say "must" when what's
> > really meant is "should".  So the rule "It must fix only one thing."
> > really means that commits that each make a single logical change are
> > strongly preferred.
> > 
> > It does not mean that upstream commits should be trimmed down to
> > conform to this.  Greg generally considers it more important to avoid
> > changes to the upstream commit, where possible.  Right, Greg?
> > 
> > And speaking only for myself, I particularly dislike stable backports
> > that are significantly different from the original upstream commit but
> > don't mention this difference in the commit message.
> 
> I _STRONGLY_ dislike backports that are different than what is in
> Linus's tree and normally I catch it when someone tries to do that.  I
> missed this one here, and that's not ok on my part for missing that, and
> for the authors part in doing that :(
> 
> So, what to do here, should I revert this series and take a fixed-up
> one?  What exactly is the stable tree now missing because of this
> mistake?

If you apply the attached patch, that should complete the backporting
of commit 2f38c3c01de9.  I'm not able to test the driver but the change
looks reasonable and it builds OK.

Ben.

-- 
Ben Hutchings, Software Developer                         Codethink Ltd
https://www.codethink.co.uk/                 Dale House, 35 Dale Street
                                     Manchester, M1 2HF, United Kingdom

[-- Attachment #2: 0001-ath10k-fix-rfc1042-header-retrieval-in-QCA4019-with-.patch --]
[-- Type: text/x-patch, Size: 2263 bytes --]

From 89166b7bbc5a50ca22abf2215eed74c788cae286 Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Date: Mon, 26 Sep 2016 21:56:24 +0300
Subject: [PATCH] ath10k: fix rfc1042 header retrieval in QCA4019 with eth
 decap mode

commit 2f38c3c01de945234d23dd163e3528ccb413066d upstream.

Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
rx_hdr_status is not padded to align in 4-byte boundary. Define a
new hw_params field to handle different alignment behaviour between
different hw. This patch fixes improper retrieval of rfc1042 header
with QCA4019. This patch along with "ath10k: Properly remove padding
from the start of rx payload" will fix traffic failure in ethernet
decap mode for QCA4019.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
[bwh: This just adds the part that was left out of the previous backport,
 commit b88fb9ea475a.]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index d26cb37b1fbd..b32c47fe926d 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1166,6 +1166,7 @@ static void *ath10k_htt_rx_h_find_rfc1042(struct ath10k *ar,
 	size_t hdr_len, crypto_len;
 	void *rfc1042;
 	bool is_first, is_last, is_amsdu;
+	int bytes_aligned = ar->hw_params.decap_align_bytes;
 
 	rxd = (void *)msdu->data - sizeof(*rxd);
 	hdr = (void *)rxd->rx_hdr_status;
@@ -1182,8 +1183,8 @@ static void *ath10k_htt_rx_h_find_rfc1042(struct ath10k *ar,
 		hdr_len = ieee80211_hdrlen(hdr->frame_control);
 		crypto_len = ath10k_htt_rx_crypto_param_len(ar, enctype);
 
-		rfc1042 += round_up(hdr_len, 4) +
-			   round_up(crypto_len, 4);
+		rfc1042 += round_up(hdr_len, bytes_aligned) +
+			   round_up(crypto_len, bytes_aligned);
 	}
 
 	if (is_amsdu)
-- 
Ben Hutchings, Software Developer                         Codethink Ltd
https://www.codethink.co.uk/                 Dale House, 35 Dale Street
                                     Manchester, M1 2HF, United Kingdom

Re: [PATCH 4.4 08/56] ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode

[Greg Kroah-Hartman]

On Thu, Jun 07, 2018 at 05:42:44PM +0100, Ben Hutchings wrote:
> On Thu, 2018-06-07 at 18:16 +0200, Greg Kroah-Hartman wrote:
> > On Thu, Jun 07, 2018 at 04:49:57PM +0100, Ben Hutchings wrote:
> > > On Thu, 2018-06-07 at 17:22 +0530, Sriram R wrote:
> > > > Hi Ben,
> > > > 
> > > > On 2018-06-04 23:22, Ben Hutchings wrote:
> > > > > On Mon, 2018-05-14 at 08:48 +0200, Greg Kroah-Hartman wrote:
> > > > > > 4.4-stable review patch.  If anyone has any objections, please let me 
> > > > > > know.
> > > > > > 
> > > > > > ------------------
> > > > > > 
> > > > > > From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
> > > > > > 
> > > > > > commit 2f38c3c01de945234d23dd163e3528ccb413066d upstream.
> > > > > > 
> > > > > > Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
> > > > > > rx_hdr_status is not padded to align in 4-byte boundary. Define a
> > > > > > new hw_params field to handle different alignment behaviour between
> > > > > > different hw. This patch fixes improper retrieval of rfc1042 header
> > > > > > with QCA4019. This patch along with "ath10k: Properly remove padding
> > > > > > from the start of rx payload" will fix traffic failure in ethernet
> > > > > > decap mode for QCA4019.
> > > > > > 
> > > > > > Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
> > > > > > Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
> > > > > > Signed-off-by: Sriram R <srirrama@codeaurora.org>
> > > > > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > > > 
> > > > > [...]
> > > > > 
> > > > > I'm curious as to why this backport doesn't include the change to
> > > > > ath10k_htt_rx_h_find_rfc1042().  I understand that the addition of the
> > > > > new field is a dependency for the following patch, but shouldn't the
> > > > > fix included in the upstream commit also be applied to 4.4?
> > > > > 
> > > > 
> > > >    Our main intention with this patchset [1] was to provide fix for 
> > > > replay detection security issue seen in ath10k driver which needed to be 
> > > > in the stable releases.
> > > > 
> > > > And, as per stable tree guidelines we wanted the patchset to have only 
> > > > one and this important fix .
> > > 
> > > OK, I think the problem here is that the rules say "must" when what's
> > > really meant is "should".  So the rule "It must fix only one thing."
> > > really means that commits that each make a single logical change are
> > > strongly preferred.
> > > 
> > > It does not mean that upstream commits should be trimmed down to
> > > conform to this.  Greg generally considers it more important to avoid
> > > changes to the upstream commit, where possible.  Right, Greg?
> > > 
> > > And speaking only for myself, I particularly dislike stable backports
> > > that are significantly different from the original upstream commit but
> > > don't mention this difference in the commit message.
> > 
> > I _STRONGLY_ dislike backports that are different than what is in
> > Linus's tree and normally I catch it when someone tries to do that.  I
> > missed this one here, and that's not ok on my part for missing that, and
> > for the authors part in doing that :(
> > 
> > So, what to do here, should I revert this series and take a fixed-up
> > one?  What exactly is the stable tree now missing because of this
> > mistake?
> 
> If you apply the attached patch, that should complete the backporting
> of commit 2f38c3c01de9.  I'm not able to test the driver but the change
> looks reasonable and it builds OK.

Looks good, thanks for this, now queued up.

greg k-h