[PATCH V15 1/2] scsi: ufs: set the device reference clock setting

[PATCH V15 1/2] scsi: ufs: set the device reference clock setting

[Sayali Lokhande]

From: Subhash Jadavani <subhashj@codeaurora.org>

UFS host supplies the reference clock to UFS device and UFS device
specification allows host to provide one of the 4 frequencies (19.2 MHz,
26 MHz, 38.4 MHz, 52 MHz) for reference clock. Host should set the
device reference clock frequency setting in the device based on what
frequency it is supplying to UFS device.

Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |  6 ++
 drivers/scsi/ufs/ufs.h                             | 14 ++++
 drivers/scsi/ufs/ufshcd.c                          | 83 ++++++++++++++++++++++
 drivers/scsi/ufs/ufshcd.h                          |  2 +
 4 files changed, 105 insertions(+)

diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index c39dfef..88a1d24 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -33,6 +33,12 @@ Optional properties:
 - clocks                : List of phandle and clock specifier pairs
 - clock-names           : List of clock input name strings sorted in the same
                           order as the clocks property.
+			  "ref_clk" indicates reference clock frequency.
+			  UFS host supplies reference clock to UFS device and UFS device
+			  specification allows host to provide one of the 4 frequencies (19.2 MHz,
+			  26 MHz, 38.4 MHz, 52MHz) for reference clock. This "ref_clk" entry is
+			  parsed and used to update the reference clock setting in device.
+			  Defaults to 26 MHz(as per specification) if not specified by host.
 - freq-table-hz		: Array of <min max> operating frequencies stored in the same
                           order as the clocks property. If this property is not
 			  defined or a value in the array is "0" then it is assumed
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 14e5bf7..b3aaea8 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -378,6 +378,20 @@ enum query_opcode {
 	UPIU_QUERY_OPCODE_TOGGLE_FLAG	= 0x8,
 };
 
+/* bRefClkFreq attribute values */
+enum ufs_ref_clk_freq {
+	REF_CLK_FREQ_19_2_MHZ	= 0,
+	REF_CLK_FREQ_26_MHZ	= 1,
+	REF_CLK_FREQ_38_4_MHZ	= 2,
+	REF_CLK_FREQ_52_MHZ	= 3,
+	REF_CLK_FREQ_INVAL	= -1,
+};
+
+struct ufs_ref_clk {
+	unsigned long freq_hz;
+	enum ufs_ref_clk_freq val;
+};
+
 /* Query response result code */
 enum {
 	QUERY_RESULT_SUCCESS                    = 0x00,
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index c5b1bf1..9be9fa1 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6296,6 +6296,74 @@ static void ufshcd_def_desc_sizes(struct ufs_hba *hba)
 	hba->desc_size.hlth_desc = QUERY_DESC_HEALTH_DEF_SIZE;
 }
 
+static struct ufs_ref_clk ufs_ref_clk_freqs[] = {
+	{19200000, REF_CLK_FREQ_19_2_MHZ},
+	{26000000, REF_CLK_FREQ_26_MHZ},
+	{38400000, REF_CLK_FREQ_38_4_MHZ},
+	{52000000, REF_CLK_FREQ_52_MHZ},
+	{0, REF_CLK_FREQ_INVAL},
+};
+
+static enum ufs_ref_clk_freq
+ufs_get_bref_clk_from_hz(unsigned long freq)
+{
+	int i;
+
+	for (i = 0; ufs_ref_clk_freqs[i].freq_hz; i++)
+		if (ufs_ref_clk_freqs[i].freq_hz == freq)
+			return ufs_ref_clk_freqs[i].val;
+
+	return REF_CLK_FREQ_INVAL;
+}
+
+void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk)
+{
+	unsigned long freq;
+
+	freq = clk_get_rate(refclk);
+
+	hba->dev_ref_clk_freq =
+		ufs_get_bref_clk_from_hz(freq);
+
+	if (hba->dev_ref_clk_freq == REF_CLK_FREQ_INVAL)
+		dev_err(hba->dev,
+		"invalid ref_clk setting = %ld\n", freq);
+}
+
+static int ufshcd_set_dev_ref_clk(struct ufs_hba *hba)
+{
+	int err;
+	u32 ref_clk;
+	u32 freq = hba->dev_ref_clk_freq;
+
+	err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
+			QUERY_ATTR_IDN_REF_CLK_FREQ, 0, 0, &ref_clk);
+
+	if (err) {
+		dev_err(hba->dev, "failed reading bRefClkFreq. err = %d\n",
+			err);
+		goto out;
+	}
+
+	if (ref_clk == freq)
+		goto out; /* nothing to update */
+
+	err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
+			QUERY_ATTR_IDN_REF_CLK_FREQ, 0, 0, &freq);
+
+	if (err) {
+		dev_err(hba->dev, "bRefClkFreq setting to %lu Hz failed\n",
+			ufs_ref_clk_freqs[freq].freq_hz);
+		goto out;
+	}
+
+	dev_dbg(hba->dev, "bRefClkFreq setting to %lu Hz succeeded\n",
+			ufs_ref_clk_freqs[freq].freq_hz);
+
+out:
+	return err;
+}
+
 /**
  * ufshcd_probe_hba - probe hba to detect device and initialize
  * @hba: per-adapter instance
@@ -6361,6 +6429,12 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
 			"%s: Failed getting max supported power mode\n",
 			__func__);
 	} else {
+		/*
+		 * Set the right value to bRefClkFreq before attempting to
+		 * switch to HS gears.
+		 */
+		if (hba->dev_ref_clk_freq != REF_CLK_FREQ_INVAL)
+			ufshcd_set_dev_ref_clk(hba);
 		ret = ufshcd_config_pwr_mode(hba, &hba->max_pwr_info.info);
 		if (ret) {
 			dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n",
@@ -6837,6 +6911,14 @@ static int ufshcd_init_clocks(struct ufs_hba *hba)
 			goto out;
 		}
 
+		/*
+		 * Parse device ref clk freq as per device tree "ref_clk".
+		 * Default dev_ref_clk_freq is set to REF_CLK_FREQ_INVAL
+		 * in ufshcd_alloc_host().
+		 */
+		if (!strcmp(clki->name, "ref_clk"))
+			ufshcd_parse_dev_ref_clk_freq(hba, clki->clk);
+
 		if (clki->max_freq) {
 			ret = clk_set_rate(clki->clk, clki->max_freq);
 			if (ret) {
@@ -7690,6 +7772,7 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle)
 	hba->host = host;
 	hba->dev = dev;
 	*hba_handle = hba;
+	hba->dev_ref_clk_freq = REF_CLK_FREQ_INVAL;
 
 	INIT_LIST_HEAD(&hba->clk_list_head);
 
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 8110dcd..4b5584b 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -548,6 +548,7 @@ struct ufs_hba {
 	void *priv;
 	unsigned int irq;
 	bool is_irq_enabled;
+	enum ufs_ref_clk_freq dev_ref_clk_freq;
 
 	/* Interrupt aggregation support is broken */
 	#define UFSHCD_QUIRK_BROKEN_INTR_AGGR			0x1
@@ -746,6 +747,7 @@ static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
 int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
 				u32 val, unsigned long interval_us,
 				unsigned long timeout_ms, bool can_sleep);
+void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk);
 
 static inline void check_upiu_size(void)
 {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V15 1/2] scsi: ufs: set the device reference clock setting

[Rob Herring]

On Tue, Oct 16, 2018 at 02:29:41PM +0530, Sayali Lokhande wrote:
> From: Subhash Jadavani <subhashj@codeaurora.org>
> 
> UFS host supplies the reference clock to UFS device and UFS device
> specification allows host to provide one of the 4 frequencies (19.2 MHz,
> 26 MHz, 38.4 MHz, 52 MHz) for reference clock. Host should set the
> device reference clock frequency setting in the device based on what
> frequency it is supplying to UFS device.
> 
> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
> Signed-off-by: Can Guo <cang@codeaurora.org>
> Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
> Reviewed-by: Evan Green <evgreen@chromium.org>
> ---
>  .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |  6 ++

Acked-by: Rob Herring <robh@kernel.org>

>  drivers/scsi/ufs/ufs.h                             | 14 ++++
>  drivers/scsi/ufs/ufshcd.c                          | 83 ++++++++++++++++++++++
>  drivers/scsi/ufs/ufshcd.h                          |  2 +
>  4 files changed, 105 insertions(+)

[PATCH V15 2/2] scsi: ufs: Add configfs support for UFS provisioning

[Sayali Lokhande]

This patch adds configfs support to provision UFS device at
runtime. This feature can be primarily useful in factory or
assembly line as some devices may be required to be configured
multiple times during initial system development phase.
Configuration Descriptors can be written multiple times until
bConfigDescrLock attribute is zero.

Configuration descriptor buffer consists of Device and Unit
descriptor configurable parameters which are parsed from vendor
specific provisioning file and then passed via configfs node at
runtime to provision ufs device.
CONFIG_CONFIGFS_FS and CONFIG_SCSI_UFS_PROVISION needs to be enabled
for using this feature.

Usage:
1) To read current configuration descriptor with index X
   (where index X can be 0/1/2/3) :
   cat /config/<device_name>/ufs_config_desc_X

2) To write configuration descriptor with index X :
   echo <config_desc_buf> > /config/<device_name>/ufs_config_desc_X

Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
---
 Documentation/ABI/testing/configfs-driver-ufs |  12 ++
 drivers/scsi/ufs/Kconfig                      |  10 ++
 drivers/scsi/ufs/Makefile                     |   4 +-
 drivers/scsi/ufs/ufs-configfs.c               | 237 ++++++++++++++++++++++++++
 drivers/scsi/ufs/ufshcd.c                     |   3 +-
 drivers/scsi/ufs/ufshcd.h                     |  18 ++
 6 files changed, 282 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/ABI/testing/configfs-driver-ufs
 create mode 100644 drivers/scsi/ufs/ufs-configfs.c

diff --git a/Documentation/ABI/testing/configfs-driver-ufs b/Documentation/ABI/testing/configfs-driver-ufs
new file mode 100644
index 0000000..6743ea9
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-driver-ufs
@@ -0,0 +1,12 @@
+What:		/config/*/ufs_config_desc_X
+Date:		Jun 2018
+KernelVersion:	4.20
+Description:
+		This file shows bytes of the current ufs configuration descriptor
+		with index X (where X = 0/1/2/3) set in device. This can be used to
+		provision ufs device if bConfigDescrLock is 0.
+		For more details, refer 14.1.6.3 Configuration Descriptor and
+		table 14-12 - Unit Descriptor configurable parameters from specs for
+		description and format of each configuration descriptor parameter.
+		Parameters of Configuration descriptor buffer for respective index
+		needs to be passed as bytes in space separated format.
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index e27b4d4..6e7ff35 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -100,3 +100,13 @@ config SCSI_UFS_QCOM
 
 	  Select this if you have UFS controller on QCOM chipset.
 	  If unsure, say N.
+
+config SCSI_UFS_PROVISION
+	bool "Runtime UFS Provisioning support"
+	depends on SCSI_UFSHCD && CONFIGFS_FS
+	help
+	  This enables runtime UFS provisioning support. This can be used
+	  primarily during assembly line as some devices may be required to
+	  be configured multiple times during initial development phase.
+
+	  If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 918f579..946eac2 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -4,6 +4,8 @@ obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.
 obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
-ufshcd-core-objs := ufshcd.o ufs-sysfs.o
+ufshcd-core-objs-y := ufshcd.o ufs-sysfs.o
+ufshcd-core-objs-$(CONFIG_SCSI_UFS_PROVISION) += ufs-configfs.o
+ufshcd-core-objs := $(ufshcd-core-objs-y)
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
 obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
diff --git a/drivers/scsi/ufs/ufs-configfs.c b/drivers/scsi/ufs/ufs-configfs.c
new file mode 100644
index 0000000..7be5ac3
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-configfs.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018, Linux Foundation.
+
+#include <linux/configfs.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+#include "ufs.h"
+#include "ufshcd.h"
+
+static inline struct ufs_hba *config_item_to_hba(struct config_item *item)
+{
+	struct config_group *group = to_config_group(item);
+	struct configfs_subsystem *subsys = to_configfs_subsystem(group);
+	struct ufs_hba *hba = container_of(subsys, struct ufs_hba, subsys);
+
+	return hba;
+}
+
+static ssize_t ufs_config_desc_show(struct config_item *item, char *buf,
+				    u8 index)
+{
+	struct ufs_hba *hba = config_item_to_hba(item);
+	u8 *desc_buf = NULL;
+	int desc_buf_len = hba->desc_size.conf_desc;
+	int i, ret, curr_len = 0;
+
+	desc_buf = kzalloc(desc_buf_len, GFP_KERNEL);
+	if (!desc_buf)
+		return -ENOMEM;
+
+	ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC,
+					    QUERY_DESC_IDN_CONFIGURATION, index,
+					    0, desc_buf, &desc_buf_len);
+	if (ret)
+		goto out;
+
+	for (i = 0; i < desc_buf_len; i++)
+		curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
+				"0x%x ", desc_buf[i]);
+
+out:
+	kfree(desc_buf);
+	return ret ? ret : curr_len;
+}
+
+ssize_t ufshcd_desc_configfs_store(struct config_item *item, const char *buf,
+				   size_t count, u8 index)
+{
+	char *strbuf;
+	char *strbuf_copy;
+	struct ufs_hba *hba = config_item_to_hba(item);
+	u8 *desc_buf = NULL;
+	int desc_buf_len = hba->desc_size.conf_desc;
+	char *token;
+	int i, ret;
+	u8 value;
+	u32 config_desc_lock = 0;
+
+	desc_buf = kzalloc(desc_buf_len, GFP_KERNEL);
+	if (!desc_buf)
+		return -ENOMEM;
+
+	strbuf = kstrdup(buf, GFP_KERNEL);
+	if (!strbuf) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	strbuf_copy = strbuf;
+
+	/* Just return if bConfigDescrLock is already set */
+	ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
+				QUERY_ATTR_IDN_CONF_DESC_LOCK, 0, 0,
+				&config_desc_lock);
+	if (ret)
+		goto out;
+
+	if (config_desc_lock) {
+		dev_err(hba->dev, "bConfigDescrLock already set to %u, cannot re-provision device!\n",
+			config_desc_lock);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/*
+	 * First read the current configuration descriptor
+	 * and then update with user provided parameters
+	 */
+	ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC,
+					    QUERY_DESC_IDN_CONFIGURATION, index,
+					    0, desc_buf, &desc_buf_len);
+	if (ret)
+		goto out;
+
+	for (i = 0; i < desc_buf_len; i++) {
+		token = strsep(&strbuf_copy, " ");
+		if (!token)
+			break;
+
+		ret = kstrtou8(token, 0, &value);
+		if (ret) {
+			dev_err(hba->dev, "Invalid value %s writing UFS configuration descriptor %u\n",
+				token, index);
+			ret = -EINVAL;
+			goto out;
+		}
+		desc_buf[i] = value;
+	}
+
+	/* Write configuration descriptor to provision ufs */
+	ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_WRITE_DESC,
+					    QUERY_DESC_IDN_CONFIGURATION, index,
+					    0, desc_buf, &desc_buf_len);
+	if (!ret)
+		dev_info(hba->dev, "UFS Configuration Descriptor %u written\n",
+			index);
+
+out:
+	kfree(strbuf);
+	kfree(desc_buf);
+	return ret ? ret : count;
+}
+
+static ssize_t ufs_config_desc_0_show(struct config_item *item, char *buf)
+{
+	return ufs_config_desc_show(item, buf, 0);
+}
+
+static ssize_t ufs_config_desc_0_store(struct config_item *item,
+				       const char *buf, size_t count)
+{
+	return ufshcd_desc_configfs_store(item, buf, count, 0);
+}
+
+static ssize_t ufs_config_desc_1_show(struct config_item *item, char *buf)
+{
+	return ufs_config_desc_show(item, buf, 1);
+}
+
+static ssize_t ufs_config_desc_1_store(struct config_item *item,
+				       const char *buf, size_t count)
+{
+	return ufshcd_desc_configfs_store(item, buf, count, 1);
+}
+
+static ssize_t ufs_config_desc_2_show(struct config_item *item, char *buf)
+{
+	return ufs_config_desc_show(item, buf, 2);
+}
+
+static ssize_t ufs_config_desc_2_store(struct config_item *item,
+				       const char *buf, size_t count)
+{
+	return ufshcd_desc_configfs_store(item, buf, count, 2);
+}
+
+static ssize_t ufs_config_desc_3_show(struct config_item *item, char *buf)
+{
+	return ufs_config_desc_show(item, buf, 3);
+}
+
+static ssize_t ufs_config_desc_3_store(struct config_item *item,
+				       const char *buf, size_t count)
+{
+	return ufshcd_desc_configfs_store(item, buf, count, 3);
+}
+
+static struct configfs_attribute ufshcd_attr_provision_0 = {
+	.ca_name	= "ufs_config_desc_0",
+	.ca_mode	= 0644,
+	.ca_owner	= THIS_MODULE,
+	.show		= ufs_config_desc_0_show,
+	.store		= ufs_config_desc_0_store,
+};
+
+static struct configfs_attribute ufshcd_attr_provision_1 = {
+	.ca_name	= "ufs_config_desc_1",
+	.ca_mode	= 0644,
+	.ca_owner	= THIS_MODULE,
+	.show		= ufs_config_desc_1_show,
+	.store		= ufs_config_desc_1_store,
+};
+
+static struct configfs_attribute ufshcd_attr_provision_2 = {
+	.ca_name	= "ufs_config_desc_2",
+	.ca_mode	= 0644,
+	.ca_owner	= THIS_MODULE,
+	.show		= ufs_config_desc_2_show,
+	.store		= ufs_config_desc_2_store,
+};
+
+static struct configfs_attribute ufshcd_attr_provision_3 = {
+	.ca_name	= "ufs_config_desc_3",
+	.ca_mode	= 0644,
+	.ca_owner	= THIS_MODULE,
+	.show		= ufs_config_desc_3_show,
+	.store		= ufs_config_desc_3_store,
+};
+
+static struct configfs_attribute *ufshcd_attrs[] = {
+	&ufshcd_attr_provision_0,
+	&ufshcd_attr_provision_1,
+	&ufshcd_attr_provision_2,
+	&ufshcd_attr_provision_3,
+	NULL,
+};
+
+static struct config_item_type ufscfg_type = {
+	.ct_attrs	= ufshcd_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+void ufshcd_configfs_init(struct ufs_hba *hba, const char *name)
+{
+	int ret;
+	struct config_item *cg_item;
+	struct configfs_subsystem *subsys;
+
+	cg_item = &hba->subsys.su_group.cg_item;
+	snprintf(cg_item->ci_namebuf, CONFIGFS_ITEM_NAME_LEN, "%s", name);
+	cg_item->ci_type = &ufscfg_type;
+
+	subsys = &hba->subsys;
+	config_group_init(&subsys->su_group);
+	mutex_init(&subsys->su_mutex);
+	ret = configfs_register_subsystem(subsys);
+	if (ret)
+		pr_err("Error %d while registering subsystem %s\n",
+		       ret,
+		       subsys->su_group.cg_item.ci_namebuf);
+}
+
+void ufshcd_configfs_exit(struct ufs_hba *hba)
+{
+	configfs_unregister_subsystem(&hba->subsys);
+}
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 9be9fa1..618e4cb 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7704,6 +7704,7 @@ int ufshcd_shutdown(struct ufs_hba *hba)
 void ufshcd_remove(struct ufs_hba *hba)
 {
 	ufs_sysfs_remove_nodes(hba->dev);
+	ufshcd_configfs_exit(hba);
 	scsi_remove_host(hba->host);
 	/* disable interrupts */
 	ufshcd_disable_intr(hba, hba->intr_mask);
@@ -7958,7 +7959,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 
 	async_schedule(ufshcd_async_scan, hba);
 	ufs_sysfs_add_nodes(hba->dev);
-
+	ufshcd_configfs_init(hba, dev_name(hba->dev));
 	return 0;
 
 out_remove_scsi_host:
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 4b5584b..4149647 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -37,6 +37,7 @@
 #ifndef _UFSHCD_H
 #define _UFSHCD_H
 
+#include <linux/configfs.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -515,6 +516,9 @@ struct ufs_hba {
 
 	struct Scsi_Host *host;
 	struct device *dev;
+#ifdef CONFIG_SCSI_UFS_PROVISION
+	struct configfs_subsystem subsys;
+#endif
 	/*
 	 * This field is to keep a reference to "scsi_device" corresponding to
 	 * "UFS device" W-LU.
@@ -868,6 +872,20 @@ int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index,
 int ufshcd_hold(struct ufs_hba *hba, bool async);
 void ufshcd_release(struct ufs_hba *hba);
 
+/* Expose UFS configfs API's */
+#ifndef CONFIG_SCSI_UFS_PROVISION
+static inline void ufshcd_configfs_init(struct ufs_hba *hba, const char *name)
+{
+}
+
+static inline void ufshcd_configfs_exit(struct ufs_hba *hba)
+{
+}
+#else
+void ufshcd_configfs_init(struct ufs_hba *hba, const char *name);
+void ufshcd_configfs_exit(struct ufs_hba *hba);
+#endif
+
 int ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
 	int *desc_length);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

RE: [PATCH V15 2/2] scsi: ufs: Add configfs support for UFS provisioning

[Avri Altman]

Hi,

> +++ b/drivers/scsi/ufs/Makefile
> @@ -4,6 +4,8 @@ obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-
> pci.o ufshcd-dwc.o tc-dwc-g210.
>  obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o
> ufshcd-dwc.o tc-dwc-g210.o
>  obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
>  obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
> -ufshcd-core-objs := ufshcd.o ufs-sysfs.o
> +ufshcd-core-objs-y := ufshcd.o ufs-sysfs.o
> +ufshcd-core-objs-$(CONFIG_SCSI_UFS_PROVISION) += ufs-configfs.o
> +ufshcd-core-objs := $(ufshcd-core-objs-y)
This will work, but I think it should be:
ufshcd-core-y                          += ufshcd.o ufs-sysfs.o
ufshcd-core-$( CONFIG_SCSI_UFS_PROVISION) += ufs-configfs.o

Also, you may want to rebase your patches with Martin's 4.20/scsi-queue

Thanks,
Avri