linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Parav Pandit <parav@mellanox.com>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	michal.lkml@markovi.net, davem@davemloft.net,
	gregkh@linuxfoundation.org, jiri@mellanox.com
Cc: parav@mellanox.com
Subject: [RFC net-next 1/8] subdev: Introducing subdev bus
Date: Thu, 28 Feb 2019 23:37:45 -0600	[thread overview]
Message-ID: <1551418672-12822-2-git-send-email-parav@mellanox.com> (raw)
In-Reply-To: <1551418672-12822-1-git-send-email-parav@mellanox.com>

Introduce a new subdev bus which holds sub devices created from a
primary device. These devices are named as 'subdev'.
A subdev is identified similarly to pci device using 16-bit vendor id
and device id.
Unlike PCI devices, scope of subdev is limited to Linux kernel.
A central entry that assigns unique subdev vendor and device id is:
include/linux/subdev_ids.h enums. Enum are chosen over define macro so
that two vendors do not end up with vendor id in kernel development
process.

subdev bus holds subdevices of multiple devices. A typical created
subdev for a PCI device in sysfs tree appears under their parent's
device as using core's default device naming scheme:

subdev<instance_id>.
i.e.
subdev0
subdev1

$ ls -l /sys/bus/pci/devices/0000:05:00.0
[..]
drwxr-xr-x 4 root root        0 Feb 13 15:57 subvdev0
drwxr-xr-x 4 root root        0 Feb 13 15:57 subvdev1

Device model view:
------------------
               +------+    +------+       +------+
               |subdev|    |subdev|       |subdev|
          -----|  1   |----|  2   |-------|  3   |----------
          |    +--|---+    +-|----+       +--|---+         |
          --------|----------|---subdev bus--|--------------
                  |          |               |
               +--+----+-----+           +---+---+
               |pcidev |                 |pcidev |
          -----|   A   |-----------------|   B   |----------
          |    +-------+                 +-------+         |
          -------------------pci bus------------------------

subdev are allocated and freed using subdev_alloc(), subdev_free() APIs.
A driver which wants to create actual class driver such as
net/block/infiniband need to use subdev_register_driver(),
subdev_unregister_driver() APIs.

Signed-off-by: Parav Pandit <parav@mellanox.com>
---
 drivers/Kconfig                 |   2 +
 drivers/Makefile                |   1 +
 drivers/subdev/Kconfig          |  12 ++++
 drivers/subdev/Makefile         |   8 +++
 drivers/subdev/subdev_main.c    | 153 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mod_devicetable.h |  12 ++++
 include/linux/subdev_bus.h      |  63 +++++++++++++++++
 include/linux/subdev_ids.h      |  17 +++++
 8 files changed, 268 insertions(+)
 create mode 100644 drivers/subdev/Kconfig
 create mode 100644 drivers/subdev/Makefile
 create mode 100644 drivers/subdev/subdev_main.c
 create mode 100644 include/linux/subdev_bus.h
 create mode 100644 include/linux/subdev_ids.h

diff --git a/drivers/Kconfig b/drivers/Kconfig
index 4f9f990..1818796 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -228,4 +228,6 @@ source "drivers/siox/Kconfig"
 
 source "drivers/slimbus/Kconfig"
 
+source "drivers/subdev/Kconfig"
+
 endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index e1ce029..a040e96 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -186,3 +186,4 @@ obj-$(CONFIG_MULTIPLEXER)	+= mux/
 obj-$(CONFIG_UNISYS_VISORBUS)	+= visorbus/
 obj-$(CONFIG_SIOX)		+= siox/
 obj-$(CONFIG_GNSS)		+= gnss/
+obj-$(CONFIG_SUBDEV)		+= subdev/
diff --git a/drivers/subdev/Kconfig b/drivers/subdev/Kconfig
new file mode 100644
index 0000000..8ce3acc
--- /dev/null
+++ b/drivers/subdev/Kconfig
@@ -0,0 +1,12 @@
+#
+# subdev configuration
+#
+
+config SUBDEV
+	tristate "subdev bus driver"
+	help
+	The subdev bus driver allows creating hardware based sub devices
+	from a parent device. The subdev bus driver is required to create,
+	discover devices and to attach device drivers to this subdev
+	devices. These subdev devices are created using devlink tool by
+	user.
diff --git a/drivers/subdev/Makefile b/drivers/subdev/Makefile
new file mode 100644
index 0000000..405b74a
--- /dev/null
+++ b/drivers/subdev/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for subdev bus driver
+#
+
+obj-$(CONFIG_SUBDEV)	+= subdev.o
+
+subdev-y := subdev_main.o
diff --git a/drivers/subdev/subdev_main.c b/drivers/subdev/subdev_main.c
new file mode 100644
index 0000000..4aabcaa
--- /dev/null
+++ b/drivers/subdev/subdev_main.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/subdev_bus.h>
+
+static DEFINE_XARRAY_FLAGS(subdev_ids, XA_FLAGS_ALLOC);
+
+static int subdev_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct subdev_driver *subdev_drv = to_subdev_driver(drv);
+	const struct subdev_id *ids = subdev_drv->id_table;
+	const struct subdev *subdev = to_subdev_device(dev);
+
+	while (ids) {
+		if (ids->vendor_id == subdev->dev_id.vendor_id &&
+		    ids->device_id == subdev->dev_id.device_id)
+			return 1;
+
+		ids++;
+	}
+	return 0;
+}
+
+static struct bus_type subdev_bus_type = {
+	.dev_name = "subdev",
+	.name = "subdev",
+	.match = subdev_bus_match,
+};
+
+int __subdev_register_driver(struct subdev_driver *drv, struct module *owner,
+			     const char *mod_name)
+{
+	drv->driver.name = mod_name;
+	drv->driver.bus = &subdev_bus_type;
+	drv->driver.owner = owner;
+	drv->driver.mod_name = mod_name;
+
+	return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL(__subdev_register_driver);
+
+void subdev_unregister_driver(struct subdev_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(subdev_unregister_driver);
+
+static void subdev_release(struct device *dev)
+{
+	struct subdev *subdev = to_subdev_device(dev);
+
+	kfree(subdev);
+}
+
+/**
+ * _subdev_alloc_subdev - Allocate a subdev device.
+ * @size:	Size of the device that to allocate that contains subdev
+ *		device as the first element.
+ * Returns pointer to a valid subdev structure or returns ERR_PTR.
+ *
+ */
+struct subdev *_subdev_alloc_dev(size_t size)
+{
+	struct subdev *subdev;
+
+	subdev = kzalloc(size, GFP_KERNEL);
+	if (!subdev)
+		return ERR_PTR(-ENOMEM);
+	subdev->dev.release = subdev_release;
+	device_initialize(&subdev->dev);
+	return subdev;
+}
+EXPORT_SYMBOL(_subdev_alloc_dev);
+
+/**
+ * subdev_free_dev - Free allocated subdev device.
+ * @subdev:	Pointer to subdev
+ *
+ */
+void subdev_free_dev(struct subdev *subdev)
+{
+	put_device(&subdev->dev);
+}
+EXPORT_SYMBOL(subdev_free_dev);
+
+/**
+ * subdev_add_dev - Add a sub device to bus.
+ * @subdev:	subdev devie to be placed on the bus
+ * @parent_dev:	Parent device of the subdev
+ * @vid:	Vendor ID of the device
+ * @did:	Device ID of the device
+ *
+ * Returns 0 on successfully adding subdev to bus or error code on failure.
+ * Once the device is added, it can be probed by the device driver who
+ * wish to match it.
+ *
+ */
+int subdev_add_dev(struct subdev *subdev, struct device *parent_dev,
+		   enum subdev_vendor_id vid, enum subdev_device_id did)
+{
+	u32 id = 0;
+	int ret;
+
+	if (!parent_dev)
+		return -EINVAL;
+
+	ret = xa_alloc(&subdev_ids, &id, UINT_MAX, NULL, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	subdev->dev.id = id;
+	subdev->dev_id.vendor_id = vid;
+	subdev->dev_id.device_id = did;
+	subdev->dev.parent = parent_dev;
+	subdev->dev.bus = &subdev_bus_type;
+	subdev->dev.dma_mask = parent_dev->dma_mask;
+	subdev->dev.dma_parms = parent_dev->dma_parms;
+	subdev->dev.coherent_dma_mask = parent_dev->coherent_dma_mask;
+	ret = device_add(&subdev->dev);
+	if (ret)
+		xa_erase(&subdev_ids, id);
+	return ret;
+}
+EXPORT_SYMBOL(subdev_add_dev);
+
+/**
+ * subdev_delete_dev - Delete previously added subdev device
+ *
+ * @subdev:	Pointer to subdev device to delete
+ */
+void subdev_delete_dev(struct subdev *subdev)
+{
+	device_del(&subdev->dev);
+	xa_erase(&subdev_ids, subdev->dev.id);
+}
+EXPORT_SYMBOL(subdev_delete_dev);
+
+static int __init subdev_init(void)
+{
+	return bus_register(&subdev_bus_type);
+}
+
+static void __exit subdev_exit(void)
+{
+	bus_unregister(&subdev_bus_type);
+}
+
+module_init(subdev_init);
+module_exit(subdev_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index f9bd2f3..f271dab 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -779,4 +779,16 @@ struct typec_device_id {
 	kernel_ulong_t driver_data;
 };
 
+/**
+ * struct subdev_id - subdev device identifiers defined in
+ *		      include/linux/subdev_ids.h
+ *
+ * @vendor_id: Vendor ID
+ * @device_id: Device ID
+ */
+struct subdev_id {
+	__u16 vendor_id;
+	__u16 device_id;
+};
+
 #endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/subdev_bus.h b/include/linux/subdev_bus.h
new file mode 100644
index 0000000..c6410e3
--- /dev/null
+++ b/include/linux/subdev_bus.h
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#ifndef SUBDEV_BUS_H
+#define SUBDEV_BUS_H
+
+#include <linux/mod_devicetable.h>
+#include <linux/device.h>
+#include <linux/subdev_ids.h>
+
+struct subdev_driver {
+	const struct subdev_id *id_table;
+	struct device_driver driver;
+	struct list_head list;
+};
+
+#define to_subdev_driver(x) container_of(x, struct subdev_driver, driver)
+
+int __subdev_register_driver(struct subdev_driver *drv, struct module *owner,
+			     const char *mod_name);
+#define subdev_register_driver(driver)		\
+	__subdev_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
+
+void subdev_unregister_driver(struct subdev_driver *dev);
+
+/**
+ * subdev - A subdev device representation
+ *
+ * @dev:	device struct that represent subdev device in core device model
+ * @dev_id:	Unique vendor id, device id that subdev device drivers match
+ *		against. A unique id that defines this subdev assigned in
+ *		include/linux/subdev_ids.h
+ */
+struct subdev {
+	struct device dev;
+	struct subdev_id dev_id;
+};
+
+#define to_subdev_device(x) container_of(x, struct subdev, dev)
+
+struct subdev *_subdev_alloc_dev(size_t size);
+
+/**
+ * subdev_alloc_dev -	allocate memory for driver structure which holds
+ *			subdev structure and other driver's device specific
+ *			fields.
+ * @drv_struct:		Driver's device structure which defines subdev device
+ *			as the first member in the structure.
+ * @member:		Name of the subdev instance name in drivers device
+ *			structure.
+ */
+#define subdev_alloc_dev(drv_struct, member)                                \
+	container_of(_subdev_alloc_dev(sizeof(struct drv_struct) +          \
+				      BUILD_BUG_ON_ZERO(offsetof(           \
+					      struct drv_struct, member))), \
+		     struct drv_struct, member)
+
+void subdev_free_dev(struct subdev *subdev);
+
+int subdev_add_dev(struct subdev *subdev, struct device *parent_dev,
+		   enum subdev_vendor_id vid, enum subdev_device_id did);
+void subdev_delete_dev(struct subdev *subdev);
+
+#endif
diff --git a/include/linux/subdev_ids.h b/include/linux/subdev_ids.h
new file mode 100644
index 0000000..361faa3
--- /dev/null
+++ b/include/linux/subdev_ids.h
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#ifndef SUBDEV_IDS_H
+#define SUBDEV_IDS_H
+
+enum subdev_vendor_id {
+	SUBDEV_VENDOR_ID_MELLANOX,
+
+	/* new device id must be added above at the end */
+};
+
+enum subdev_device_id {
+	SUBDEV_DEVICE_ID_MELLANOX_SF,
+
+	/* new device id mst be added above at the end */
+};
+#endif
-- 
1.8.3.1


  reply	other threads:[~2019-03-01  5:38 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-01  5:37 [RFC net-next 0/8] Introducing subdev bus and devlink extension Parav Pandit
2019-03-01  5:37 ` Parav Pandit [this message]
2019-03-01  7:17   ` [RFC net-next 1/8] subdev: Introducing subdev bus Greg KH
2019-03-01 16:35     ` Parav Pandit
2019-03-01 17:00       ` Greg KH
2019-03-26 11:48     ` Lorenzo Pieralisi
2019-03-01  5:37 ` [RFC net-next 2/8] subdev: Introduce pm callbacks Parav Pandit
2019-03-01  5:37 ` [RFC net-next 3/8] modpost: Add support for subdev device id table Parav Pandit
2019-03-01  5:37 ` [RFC net-next 4/8] devlink: Introduce and use devlink_init/cleanup() in alloc/free Parav Pandit
2019-03-01  5:37 ` [RFC net-next 5/8] devlink: Add variant of devlink_register/unregister Parav Pandit
2019-03-01  5:37 ` [RFC net-next 6/8] devlink: Add support for devlink subdev lifecycle Parav Pandit
2019-03-01  5:37 ` [RFC net-next 7/8] net/mlx5: Add devlink subdev life cycle command support Parav Pandit
2019-03-01  7:18   ` Greg KH
2019-03-01 16:04     ` Parav Pandit
2019-03-01  5:37 ` [RFC net-next 8/8] net/mlx5: Add subdev driver to bind to subdev devices Parav Pandit
2019-03-01  7:21   ` Greg KH
2019-03-01 17:21     ` Parav Pandit
2019-03-05  7:13       ` Greg KH
2019-03-05 17:57         ` Parav Pandit
2019-03-05 19:27           ` Greg KH
2019-03-05 21:37             ` Parav Pandit
2019-03-01 22:12   ` Saeed Mahameed
2019-03-04 16:45     ` Parav Pandit
2019-03-01 20:03 ` [RFC net-next 0/8] Introducing subdev bus and devlink extension Jakub Kicinski
2019-03-04  4:41   ` Parav Pandit
2019-03-05  1:35     ` Jakub Kicinski
2019-03-05 19:46       ` Parav Pandit
2019-03-05 22:39         ` Kirti Wankhede
2019-03-05 23:17           ` Parav Pandit
2019-03-05 23:44             ` Parav Pandit
2019-03-06  0:44               ` Parav Pandit
2019-03-06  3:51                 ` Kirti Wankhede
2019-03-06  5:42                   ` Parav Pandit
2019-03-07 19:04                     ` Kirti Wankhede
2019-03-07 20:27                       ` Parav Pandit
2019-03-07 20:53                         ` Kirti Wankhede
2019-03-07 21:02                           ` Parav Pandit
2019-03-07 21:07                             ` Kirti Wankhede
2019-03-07 21:21                               ` Parav Pandit
2019-03-07 22:01                                 ` Kirti Wankhede
2019-03-07 22:31                                   ` Parav Pandit
2019-03-08 12:19                                     ` Kirti Wankhede
2019-03-08 17:09                                       ` Parav Pandit
2019-03-05  1:45     ` Jakub Kicinski
2019-03-05 16:52       ` Parav Pandit
2021-05-31 10:36         ` moyufeng
2021-06-01  5:37           ` Jakub Kicinski
2021-06-01  7:33             ` Yunsheng Lin
2021-06-01 21:34               ` Jakub Kicinski
2021-06-02  2:24                 ` Yunsheng Lin
2021-06-02 16:34                   ` Jakub Kicinski
2021-06-03  3:46                     ` Yunsheng Lin
2021-06-03 17:53                       ` Jakub Kicinski
2021-06-04  1:18                         ` Yunsheng Lin
2021-06-04 18:41                           ` Jakub Kicinski
2021-06-07  1:36                             ` Yunsheng Lin
2021-06-07 19:46                               ` Jakub Kicinski
2021-06-08 12:10                                 ` Yunsheng Lin
2021-06-08 17:29                                   ` Jakub Kicinski
2021-06-09  9:16                                     ` Yunsheng Lin
2021-06-09  9:38                                       ` Parav Pandit
2021-06-09 11:05                                         ` Yunsheng Lin
2021-06-09 11:59                                           ` Parav Pandit
2021-06-09 12:30                                             ` Yunsheng Lin
2021-06-09 13:45                                               ` Parav Pandit
2021-06-10  7:04                                                 ` Yunsheng Lin
2021-06-10  7:17                                                   ` Parav Pandit
2021-06-09 16:40                                       ` Jakub Kicinski
2021-06-10  6:52                                         ` Yunsheng Lin
2021-06-09  9:52                                   ` Parav Pandit
2021-06-09 11:16                                     ` Yunsheng Lin
2021-06-09 12:00                                       ` Parav Pandit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1551418672-12822-2-git-send-email-parav@mellanox.com \
    --to=parav@mellanox.com \
    --cc=davem@davemloft.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=jiri@mellanox.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.lkml@markovi.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).