* [PATCH V1 1/2] regulator: dt-bindings: Add PM6150x compatibles [not found] <1570183734-30706-1-git-send-email-kgunda@codeaurora.org> @ 2019-10-04 10:08 ` Kiran Gunda 2019-10-04 17:52 ` Applied "regulator: dt-bindings: Add PM6150x compatibles" to the regulator tree Mark Brown 2019-10-04 10:08 ` [PATCH V1 2/2] regulator: qcom-rpmh: add PM6150/PM6150L regulator support Kiran Gunda 1 sibling, 1 reply; 4+ messages in thread From: Kiran Gunda @ 2019-10-04 10:08 UTC (permalink / raw) To: bjorn.andersson, Andy Gross, Liam Girdwood, Mark Brown, Rob Herring, Mark Rutland, linux-arm-msm, linux-kernel, devicetree Cc: Kiran Gunda Add PM6150 and PM6150L compatibles for Qualcomm SC7180 platfrom. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> --- Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index bab9f71..97c3e0b 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt @@ -28,6 +28,8 @@ Supported regulator node names: PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 PMI8998: bob + PM6150: smps1 - smps5, ldo1 - ldo19 + PM6150L: smps1 - smps8, ldo1 - ldo11, bob ======================== First Level Nodes - PMIC @@ -43,6 +45,8 @@ First Level Nodes - PMIC "qcom,pm8150l-rpmh-regulators" "qcom,pm8998-rpmh-regulators" "qcom,pmi8998-rpmh-regulators" + "qcom,pm6150-rpmh-regulators" + "qcom,pm6150l-rpmh-regulators" - qcom,pmic-id Usage: required -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Applied "regulator: dt-bindings: Add PM6150x compatibles" to the regulator tree 2019-10-04 10:08 ` [PATCH V1 1/2] regulator: dt-bindings: Add PM6150x compatibles Kiran Gunda @ 2019-10-04 17:52 ` Mark Brown 0 siblings, 0 replies; 4+ messages in thread From: Mark Brown @ 2019-10-04 17:52 UTC (permalink / raw) To: Kiran Gunda Cc: Andy Gross, bjorn.andersson, devicetree, Liam Girdwood, linux-arm-msm, linux-kernel, Mark Brown, Mark Rutland, Rob Herring The patch regulator: dt-bindings: Add PM6150x compatibles has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark From 0c06b311c053ab12a9690e17a98ff4e4a90ab3e5 Mon Sep 17 00:00:00 2001 From: Kiran Gunda <kgunda@codeaurora.org> Date: Fri, 4 Oct 2019 15:38:53 +0530 Subject: [PATCH] regulator: dt-bindings: Add PM6150x compatibles Add PM6150 and PM6150L compatibles for Qualcomm SC7180 platfrom. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Link: https://lore.kernel.org/r/1570183734-30706-2-git-send-email-kgunda@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org> --- .../devicetree/bindings/regulator/qcom,rpmh-regulator.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index bab9f71140b8..97c3e0b7611c 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt @@ -28,6 +28,8 @@ Supported regulator node names: PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 PMI8998: bob + PM6150: smps1 - smps5, ldo1 - ldo19 + PM6150L: smps1 - smps8, ldo1 - ldo11, bob ======================== First Level Nodes - PMIC @@ -43,6 +45,8 @@ First Level Nodes - PMIC "qcom,pm8150l-rpmh-regulators" "qcom,pm8998-rpmh-regulators" "qcom,pmi8998-rpmh-regulators" + "qcom,pm6150-rpmh-regulators" + "qcom,pm6150l-rpmh-regulators" - qcom,pmic-id Usage: required -- 2.20.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH V1 2/2] regulator: qcom-rpmh: add PM6150/PM6150L regulator support [not found] <1570183734-30706-1-git-send-email-kgunda@codeaurora.org> 2019-10-04 10:08 ` [PATCH V1 1/2] regulator: dt-bindings: Add PM6150x compatibles Kiran Gunda @ 2019-10-04 10:08 ` Kiran Gunda 2019-10-04 17:52 ` Applied "regulator: qcom-rpmh: add PM6150/PM6150L regulator support" to the regulator tree Mark Brown 1 sibling, 1 reply; 4+ messages in thread From: Kiran Gunda @ 2019-10-04 10:08 UTC (permalink / raw) To: bjorn.andersson, Andy Gross, Liam Girdwood, Mark Brown, linux-arm-msm, linux-kernel Cc: Kiran Gunda Add support for PM6150/PM6150L regulators. This ensures that consumers are able to modify the physical state of PMIC regulators. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> --- drivers/regulator/qcom-rpmh-regulator.c | 62 ++++++++++++++++++++++++++++++++- 1 file changed, 61 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index db6c085..8ae7ddf 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, The Linux Foundation. All rights reserved. +// Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. #define pr_fmt(fmt) "%s: " fmt, __func__ @@ -878,6 +878,58 @@ static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode) {}, }; +static const struct rpmh_vreg_init_data pm6150_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"), + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"), + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"), + RPMH_VREG("smps4", "smp%s4", &pmic5_hfsmps510, "vdd-s4"), + RPMH_VREG("smps5", "smp%s5", &pmic5_hfsmps510, "vdd-s5"), + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2-l3"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l2-l3"), + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4-l7-l8"), + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"), + RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6"), + RPMH_VREG("ldo7", "ldo%s7", &pmic5_nldo, "vdd-l4-l7-l8"), + RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l4-l7-l8"), + RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l9"), + RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo_lv, "vdd-l10-l14-l15"), + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo_lv, "vdd-l11-l12-l13"), + RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo_lv, "vdd-l11-l12-l13"), + RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo_lv, "vdd-l11-l12-l13"), + RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo_lv, "vdd-l10-l14-l15"), + RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo_lv, "vdd-l10-l14-l15"), + RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"), + RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"), + RPMH_VREG("ldo18", "ldo%s18", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"), + RPMH_VREG("ldo19", "ldo%s19", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"), + {}, +}; + +static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"), + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"), + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"), + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"), + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"), + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"), + RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"), + RPMH_VREG("smps8", "smp%s8", &pmic5_hfsmps510, "vdd-s8"), + RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo_lv, "vdd-l1-l8"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2-l3"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l2-l3"), + RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l4-l5-l6"), + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l4-l5-l6"), + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l4-l5-l6"), + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-l11"), + RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo, "vdd-l1-l8"), + RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l9-l10"), + RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l9-l10"), + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"), + RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"), + {}, +}; + static int rpmh_regulator_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -940,6 +992,14 @@ static int rpmh_regulator_probe(struct platform_device *pdev) .compatible = "qcom,pmi8998-rpmh-regulators", .data = pmi8998_vreg_data, }, + { + .compatible = "qcom,pm6150-rpmh-regulators", + .data = pm6150_vreg_data, + }, + { + .compatible = "qcom,pm6150l-rpmh-regulators", + .data = pm6150l_vreg_data, + }, {} }; MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table); -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Applied "regulator: qcom-rpmh: add PM6150/PM6150L regulator support" to the regulator tree 2019-10-04 10:08 ` [PATCH V1 2/2] regulator: qcom-rpmh: add PM6150/PM6150L regulator support Kiran Gunda @ 2019-10-04 17:52 ` Mark Brown 0 siblings, 0 replies; 4+ messages in thread From: Mark Brown @ 2019-10-04 17:52 UTC (permalink / raw) To: Kiran Gunda Cc: Andy Gross, bjorn.andersson, Liam Girdwood, linux-arm-msm, linux-kernel, Mark Brown The patch regulator: qcom-rpmh: add PM6150/PM6150L regulator support has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark From 75bb518e9bbf666a851cd43a9aba8e085b5008d8 Mon Sep 17 00:00:00 2001 From: Kiran Gunda <kgunda@codeaurora.org> Date: Fri, 4 Oct 2019 15:38:54 +0530 Subject: [PATCH] regulator: qcom-rpmh: add PM6150/PM6150L regulator support Add support for PM6150/PM6150L regulators. This ensures that consumers are able to modify the physical state of PMIC regulators. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Link: https://lore.kernel.org/r/1570183734-30706-3-git-send-email-kgunda@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org> --- drivers/regulator/qcom-rpmh-regulator.c | 62 ++++++++++++++++++++++++- 1 file changed, 61 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index db6c085da65e..8ae7ddf93b52 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, The Linux Foundation. All rights reserved. +// Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. #define pr_fmt(fmt) "%s: " fmt, __func__ @@ -878,6 +878,58 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = { {}, }; +static const struct rpmh_vreg_init_data pm6150_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"), + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"), + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"), + RPMH_VREG("smps4", "smp%s4", &pmic5_hfsmps510, "vdd-s4"), + RPMH_VREG("smps5", "smp%s5", &pmic5_hfsmps510, "vdd-s5"), + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2-l3"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l2-l3"), + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4-l7-l8"), + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"), + RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6"), + RPMH_VREG("ldo7", "ldo%s7", &pmic5_nldo, "vdd-l4-l7-l8"), + RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l4-l7-l8"), + RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l9"), + RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo_lv, "vdd-l10-l14-l15"), + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo_lv, "vdd-l11-l12-l13"), + RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo_lv, "vdd-l11-l12-l13"), + RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo_lv, "vdd-l11-l12-l13"), + RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo_lv, "vdd-l10-l14-l15"), + RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo_lv, "vdd-l10-l14-l15"), + RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"), + RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"), + RPMH_VREG("ldo18", "ldo%s18", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"), + RPMH_VREG("ldo19", "ldo%s19", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"), + {}, +}; + +static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"), + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"), + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"), + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"), + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"), + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"), + RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"), + RPMH_VREG("smps8", "smp%s8", &pmic5_hfsmps510, "vdd-s8"), + RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo_lv, "vdd-l1-l8"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2-l3"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l2-l3"), + RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l4-l5-l6"), + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l4-l5-l6"), + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l4-l5-l6"), + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-l11"), + RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo, "vdd-l1-l8"), + RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l9-l10"), + RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l9-l10"), + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"), + RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"), + {}, +}; + static int rpmh_regulator_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -940,6 +992,14 @@ static const struct of_device_id rpmh_regulator_match_table[] = { .compatible = "qcom,pmi8998-rpmh-regulators", .data = pmi8998_vreg_data, }, + { + .compatible = "qcom,pm6150-rpmh-regulators", + .data = pm6150_vreg_data, + }, + { + .compatible = "qcom,pm6150l-rpmh-regulators", + .data = pm6150l_vreg_data, + }, {} }; MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table); -- 2.20.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-10-04 17:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1570183734-30706-1-git-send-email-kgunda@codeaurora.org>
2019-10-04 10:08 ` [PATCH V1 1/2] regulator: dt-bindings: Add PM6150x compatibles Kiran Gunda
2019-10-04 17:52 ` Applied "regulator: dt-bindings: Add PM6150x compatibles" to the regulator tree Mark Brown
2019-10-04 10:08 ` [PATCH V1 2/2] regulator: qcom-rpmh: add PM6150/PM6150L regulator support Kiran Gunda
2019-10-04 17:52 ` Applied "regulator: qcom-rpmh: add PM6150/PM6150L regulator support" to the regulator tree Mark Brown
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).