LKML Archive on lore.kernel.org
 help / color / Atom feed
* [patch V3 00/20] x86/iopl: Prevent user space from using CLI/STI with iopl(3)
@ 2019-11-13 20:42 Thomas Gleixner
  2019-11-13 20:42 ` [patch V3 01/20] x86/ptrace: Prevent truncation of bitmap size Thomas Gleixner
                   ` (20 more replies)
  0 siblings, 21 replies; 53+ messages in thread
From: Thomas Gleixner @ 2019-11-13 20:42 UTC (permalink / raw)
  To: LKML
  Cc: x86, Andy Lutomirski, Linus Torvalds, Stephen Hemminger,
	Willy Tarreau, Juergen Gross, Sean Christopherson,
	H. Peter Anvin

This is the third version of the attempt to confine the unwanted side
effects of iopl(). The first version of this series can be found here:

   https://lore.kernel.org/r/20191106193459.581614484@linutronix.de

Second version is here:

   https://lore.kernel.org/r/20191111220314.519933535@linutronix.de

The V1 cover letter also contains a longer variant of the
background. Summary:

iopl(level = 3) enables aside of access to all 65536 I/O ports also the
usage of CLI/STI in user space.

Disabling interrupts in user space can lead to system lockups and breaks
assumptions in the kernel that userspace always runs with interrupts
enabled.

iopl() is often preferred over ioperm() as it avoids the overhead of
copying the tasks I/O bitmap to the TSS bitmap on context switch. This
overhead can be avoided by providing a all zeroes bitmap in the TSS and
switching the TSS bitmap offset to this permit all IO bitmap. It's
marginally slower than iopl() which is a one time setup, but prevents the
usage of CLI/STI in user space.

The changes vs. V3:

    - Split out the restructuring of the first/subsequent ioperm()
      invocation into a seperate patch to address the inconsisteny which
      Andy detected in the patch which introduces the concept of
      invalidating the I/O bitmap base to speed up context switching.
      This change is moved in front so the subsequent changes are
      functionally correct.

    - Moved the non HW TSS data related to I/O bitmap(s) into a seperate
      data structure. Modified version of Ingos proposed patch.

    - Made struct memeber names more consistent (Ingo)

    - Dropped the bitmap union. It is not longer necessary because V2
      already dropped the finer grained copying algorithm. The sequence
      count approach should avoid most of the copying overhead when the
      number of ioperm() using processes is very low which is the normal
      case.

    - Dropped the pointer storage of the bitmap in the TSS data as it is
      not required (Peter, Andy)

    - Fixed the missing refcount setting in the bitmap duplication code
      path. (Peter, Andy)

    - Updated changelog and comment to explain the bitmap invalidation
      logic. (Andy)

    - Removed TIF_IO_BITMAP from the TIF flags which are evaluated on the
      next task for entering the slow path.

    - Folded the NULL pointer check fix

    - Simplified the config option in the legacy removal patch (Andy)

    - Extended the scope of the config option to disable ioperm() along
      with iopl() which also mokes all related storage and functions
      compile time conditional. (Andy)

The series is also available from git:

  git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git WIP.x86/iopl

Thanks,

	tglx
---
 arch/x86/Kconfig                        |   18 ++
 arch/x86/entry/common.c                 |    4 
 arch/x86/include/asm/io_bitmap.h        |   29 ++++
 arch/x86/include/asm/paravirt.h         |    4 
 arch/x86/include/asm/paravirt_types.h   |    2 
 arch/x86/include/asm/pgtable_32_types.h |    2 
 arch/x86/include/asm/processor.h        |  113 ++++++++++-------
 arch/x86/include/asm/ptrace.h           |    6 
 arch/x86/include/asm/switch_to.h        |   10 +
 arch/x86/include/asm/thread_info.h      |   14 +-
 arch/x86/include/asm/xen/hypervisor.h   |    2 
 arch/x86/kernel/cpu/common.c            |  188 ++++++++++++----------------
 arch/x86/kernel/doublefault.c           |    2 
 arch/x86/kernel/ioport.c                |  209 +++++++++++++++++++++-----------
 arch/x86/kernel/paravirt.c              |    2 
 arch/x86/kernel/process.c               |  200 ++++++++++++++++++++++++------
 arch/x86/kernel/process_32.c            |   77 -----------
 arch/x86/kernel/process_64.c            |   86 -------------
 arch/x86/kernel/ptrace.c                |   12 +
 arch/x86/kvm/vmx/vmx.c                  |    8 -
 arch/x86/mm/cpu_entry_area.c            |    8 +
 arch/x86/xen/enlighten_pv.c             |   10 -
 tools/testing/selftests/x86/ioperm.c    |   16 ++
 tools/testing/selftests/x86/iopl.c      |  129 ++++++++++++++++++-
 24 files changed, 674 insertions(+), 477 deletions(-)


^ permalink raw reply	[flat|nested] 53+ messages in thread
* [tip: x86/iopl] x86/tss: Move I/O bitmap data into a seperate struct
@ 2019-11-16 11:51 tip-bot2 for Thomas Gleixner
  0 siblings, 0 replies; 53+ messages in thread
From: tip-bot2 for Thomas Gleixner @ 2019-11-16 11:51 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: Ingo Molnar, Thomas Gleixner, Borislav Petkov, linux-kernel

The following commit has been merged into the x86/iopl branch of tip:

Commit-ID:     f5848e5fd2f813c3a8009a642dfbcf635287c199
Gitweb:        https://git.kernel.org/tip/f5848e5fd2f813c3a8009a642dfbcf635287c199
Author:        Thomas Gleixner <tglx@linutronix.de>
AuthorDate:    Tue, 12 Nov 2019 18:45:29 +01:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Sat, 16 Nov 2019 11:24:01 +01:00

x86/tss: Move I/O bitmap data into a seperate struct

Move the non hardware portion of I/O bitmap data into a seperate struct for
readability sake.

Originally-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/processor.h | 35 ++++++++++++++++++-------------
 arch/x86/kernel/cpu/common.c     |  4 ++--
 arch/x86/kernel/ioport.c         |  4 ++--
 arch/x86/kernel/process.c        |  6 ++---
 4 files changed, 28 insertions(+), 21 deletions(-)

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 6d0059c..cd7cd7d 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -328,11 +328,11 @@ struct x86_hw_tss {
  * IO-bitmap sizes:
  */
 #define IO_BITMAP_BITS			65536
-#define IO_BITMAP_BYTES			(IO_BITMAP_BITS/8)
-#define IO_BITMAP_LONGS			(IO_BITMAP_BYTES/sizeof(long))
+#define IO_BITMAP_BYTES			(IO_BITMAP_BITS / BITS_PER_BYTE)
+#define IO_BITMAP_LONGS			(IO_BITMAP_BYTES / sizeof(long))
 
-#define IO_BITMAP_OFFSET_VALID				\
-	(offsetof(struct tss_struct, io_bitmap) -	\
+#define IO_BITMAP_OFFSET_VALID					\
+	(offsetof(struct tss_struct, io_bitmap.bitmap) -	\
 	 offsetof(struct tss_struct, x86_tss))
 
 /*
@@ -356,14 +356,10 @@ struct entry_stack_page {
 	struct entry_stack stack;
 } __aligned(PAGE_SIZE);
 
-struct tss_struct {
-	/*
-	 * The fixed hardware portion.  This must not cross a page boundary
-	 * at risk of violating the SDM's advice and potentially triggering
-	 * errata.
-	 */
-	struct x86_hw_tss	x86_tss;
-
+/*
+ * All IO bitmap related data stored in the TSS:
+ */
+struct x86_io_bitmap {
 	/*
 	 * Store the dirty size of the last io bitmap offender. The next
 	 * one will have to do the cleanup as the switch out to a non io
@@ -371,7 +367,7 @@ struct tss_struct {
 	 * outside of the TSS limit. So for sane tasks there is no need to
 	 * actually touch the io_bitmap at all.
 	 */
-	unsigned int		io_bitmap_prev_max;
+	unsigned int		prev_max;
 
 	/*
 	 * The extra 1 is there because the CPU will access an
@@ -379,7 +375,18 @@ struct tss_struct {
 	 * bitmap. The extra byte must be all 1 bits, and must
 	 * be within the limit.
 	 */
-	unsigned long		io_bitmap[IO_BITMAP_LONGS + 1];
+	unsigned long		bitmap[IO_BITMAP_LONGS + 1];
+};
+
+struct tss_struct {
+	/*
+	 * The fixed hardware portion.  This must not cross a page boundary
+	 * at risk of violating the SDM's advice and potentially triggering
+	 * errata.
+	 */
+	struct x86_hw_tss	x86_tss;
+
+	struct x86_io_bitmap	io_bitmap;
 } __aligned(PAGE_SIZE);
 
 DECLARE_PER_CPU_PAGE_ALIGNED(struct tss_struct, cpu_tss_rw);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 8c1000a..3aee167 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1861,8 +1861,8 @@ void cpu_init(void)
 	/* Initialize the TSS. */
 	tss_setup_ist(tss);
 	tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET_INVALID;
-	tss->io_bitmap_prev_max = 0;
-	memset(tss->io_bitmap, 0xff, sizeof(tss->io_bitmap));
+	tss->io_bitmap.prev_max = 0;
+	memset(tss->io_bitmap.bitmap, 0xff, sizeof(tss->io_bitmap.bitmap));
 	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 
 	load_TR_desc();
diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c
index eed218a..80d99bb 100644
--- a/arch/x86/kernel/ioport.c
+++ b/arch/x86/kernel/ioport.c
@@ -81,9 +81,9 @@ long ksys_ioperm(unsigned long from, unsigned long num, int turn_on)
 
 	/* Update the TSS */
 	tss = this_cpu_ptr(&cpu_tss_rw);
-	memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated);
+	memcpy(tss->io_bitmap.bitmap, t->io_bitmap_ptr, bytes_updated);
 	/* Store the new end of the zero bits */
-	tss->io_bitmap_prev_max = bytes;
+	tss->io_bitmap.prev_max = bytes;
 	/* Make the bitmap base in the TSS valid */
 	tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET_VALID;
 	/* Make sure the TSS limit covers the I/O bitmap. */
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 2444fe2..35f1c80 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -374,11 +374,11 @@ static inline void switch_to_bitmap(struct thread_struct *next,
 		 * bits permitted, then the copy needs to cover those as
 		 * well so they get turned off.
 		 */
-		memcpy(tss->io_bitmap, next->io_bitmap_ptr,
-		       max(tss->io_bitmap_prev_max, next->io_bitmap_max));
+		memcpy(tss->io_bitmap.bitmap, next->io_bitmap_ptr,
+		       max(tss->io_bitmap.prev_max, next->io_bitmap_max));
 
 		/* Store the new max and set io_bitmap_base valid */
-		tss->io_bitmap_prev_max = next->io_bitmap_max;
+		tss->io_bitmap.prev_max = next->io_bitmap_max;
 		tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET_VALID;
 
 		/*

^ permalink raw reply	[flat|nested] 53+ messages in thread

end of thread, back to index

Thread overview: 53+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-13 20:42 [patch V3 00/20] x86/iopl: Prevent user space from using CLI/STI with iopl(3) Thomas Gleixner
2019-11-13 20:42 ` [patch V3 01/20] x86/ptrace: Prevent truncation of bitmap size Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 02/20] x86/process: Unify copy_thread_tls() Thomas Gleixner
2019-11-13 21:10   ` Linus Torvalds
2019-11-13 21:41     ` Thomas Gleixner
2019-11-13 22:10       ` Linus Torvalds
2019-11-13 22:33         ` Thomas Gleixner
2019-11-13 21:44     ` Brian Gerst
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 03/20] x86/cpu: Unify cpu_init() Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 04/20] x86/tss: Fix and move VMX BUILD_BUG_ON() Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 05/20] x86/iopl: Cleanup include maze Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 06/20] x86/ioperm: Simplify first ioperm() invocation logic Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 07/20] x86/ioperm: Avoid bitmap allocation if no permissions are set Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 08/20] x86/io: Speedup schedule out of I/O bitmap user Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 09/20] x86/tss: Move I/O bitmap data into a seperate struct Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 10/20] x86/ioperm: Move iobitmap data into a struct Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 11/20] x86/ioperm: Add bitmap sequence number Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 12/20] x86/ioperm: Move TSS bitmap update to exit to user work Thomas Gleixner
2019-11-13 21:19   ` Linus Torvalds
2019-11-13 21:21     ` Linus Torvalds
2019-11-13 21:44       ` Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 13/20] x86/ioperm: Remove bitmap if all permissions dropped Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 14/20] x86/ioperm: Share I/O bitmap if identical Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 15/20] selftests/x86/ioperm: Extend testing so the shared bitmap is exercised Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 16/20] x86/iopl: Fixup misleading comment Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 17/20] x86/iopl: Restrict iopl() permission scope Thomas Gleixner
2019-11-14 18:13   ` Borislav Petkov
2019-11-14 18:39     ` Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 18/20] x86/iopl: Remove legacy IOPL option Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:42 ` [patch V3 19/20] x86/ioperm: Extend IOPL config to control ioperm() as well Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-13 20:43 ` [patch V3 20/20] selftests/x86/iopl: Extend test to cover IOPL emulation Thomas Gleixner
2019-11-15 21:12   ` [tip: x86/iopl] " tip-bot2 for Thomas Gleixner
2019-11-14  8:43 ` [patch V3 00/20] x86/iopl: Prevent user space from using CLI/STI with iopl(3) Peter Zijlstra
2019-11-16 11:51 [tip: x86/iopl] x86/tss: Move I/O bitmap data into a seperate struct tip-bot2 for Thomas Gleixner

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git