linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeffrey Hugo <jhugo@codeaurora.org>
To: manivannan.sadhasivam@linaro.org, hemantk@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jeffrey Hugo <jhugo@codeaurora.org>
Subject: [PATCH v2 3/5] bus: mhi: core: Remove link_status() callback
Date: Tue,  7 Apr 2020 10:50:28 -0600	[thread overview]
Message-ID: <1586278230-29565-4-git-send-email-jhugo@codeaurora.org> (raw)
In-Reply-To: <1586278230-29565-1-git-send-email-jhugo@codeaurora.org>

If the MHI core detects invalid data due to a PCI read, it calls into
the controller via link_status() to double check that the link is infact
down.  All in all, this is pretty pointless, and racy.  There are no good
reasons for this, and only drawbacks.

Its pointless because chances are, the controller is going to do the same
thing to determine if the link is down - attempt a PCI access and compare
the result.  This does not make the link status decision any smarter.

Its racy because its possible that the link was down at the time of the
MHI core access, but then recovered before the controller access.  In this
case, the controller will indicate the link is not down, and the MHI core
will precede to use a bad value as the MHI core does not attempt to retry
the access.

Retrying the access in the MHI core is a bad idea because again, it is
racy - what if the link is down again?  Furthermore, there may be some
higher level state associated with the link status, that is now invalid
because the link went down.

The only reason why the MHI core could see "invalid" data when doing a PCI
access, that is actually valid, is if the register actually contained the
PCI spec defined sentinel for an invalid access.  In this case, it is
arguable that the MHI implementation broken, and should be fixed, not
worked around.

Therefore, remove the link_status() callback before anyone attempts to
implement it.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/bus/mhi/core/init.c | 6 ++----
 drivers/bus/mhi/core/main.c | 5 ++---
 include/linux/mhi.h         | 2 --
 3 files changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index b38359c..2af08d57 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -812,10 +812,8 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
 	if (!mhi_cntrl)
 		return -EINVAL;
 
-	if (!mhi_cntrl->runtime_get || !mhi_cntrl->runtime_put)
-		return -EINVAL;
-
-	if (!mhi_cntrl->status_cb || !mhi_cntrl->link_status)
+	if (!mhi_cntrl->runtime_get || !mhi_cntrl->runtime_put ||
+	    !mhi_cntrl->status_cb)
 		return -EINVAL;
 
 	ret = parse_config(mhi_cntrl, config);
diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index eb4256b..473278b8 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -20,9 +20,8 @@ int __must_check mhi_read_reg(struct mhi_controller *mhi_cntrl,
 {
 	u32 tmp = readl(base + offset);
 
-	/* If there is any unexpected value, query the link status */
-	if (PCI_INVALID_READ(tmp) &&
-	    mhi_cntrl->link_status(mhi_cntrl))
+	/* If the value is invalid, the link is down */
+	if (PCI_INVALID_READ(tmp))
 		return -EIO;
 
 	*out = tmp;
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index ad19960..be704a4 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -335,7 +335,6 @@ struct mhi_controller_config {
  * @syserr_worker: System error worker
  * @state_event: State change event
  * @status_cb: CB function to notify power states of the device (required)
- * @link_status: CB function to query link status of the device (required)
  * @wake_get: CB function to assert device wake (optional)
  * @wake_put: CB function to de-assert device wake (optional)
  * @wake_toggle: CB function to assert and de-assert device wake (optional)
@@ -417,7 +416,6 @@ struct mhi_controller {
 
 	void (*status_cb)(struct mhi_controller *mhi_cntrl,
 			  enum mhi_callback cb);
-	int (*link_status)(struct mhi_controller *mhi_cntrl);
 	void (*wake_get)(struct mhi_controller *mhi_cntrl, bool override);
 	void (*wake_put)(struct mhi_controller *mhi_cntrl, bool override);
 	void (*wake_toggle)(struct mhi_controller *mhi_cntrl);
-- 
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

  parent reply	other threads:[~2020-04-07 16:51 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-07 16:50 [PATCH v2 0/5] Misc MHI fixes Jeffrey Hugo
2020-04-07 16:50 ` [PATCH v2 1/5] bus: mhi: core: Handle syserr during power_up Jeffrey Hugo
2020-04-10  0:55   ` Hemant Kumar
2020-04-10 15:03     ` Jeffrey Hugo
2020-04-10 20:37       ` Bhaumik Vasav Bhatt
2020-04-10 21:39         ` Jeffrey Hugo
2020-04-13 13:34           ` Manivannan Sadhasivam
2020-04-13 14:01             ` Jeffrey Hugo
2020-04-21  6:08               ` Manivannan Sadhasivam
2020-04-22 20:16                 ` Jeffrey Hugo
2020-04-07 16:50 ` [PATCH v2 2/5] bus: mhi: core: Make sure to powerdown if mhi_sync_power_up fails Jeffrey Hugo
2020-04-08  1:34   ` hemantk
2020-04-08 16:19     ` Jeffrey Hugo
2020-04-07 16:50 ` Jeffrey Hugo [this message]
2020-04-07 16:50 ` [PATCH v2 4/5] bus: mhi: core: Offload register accesses to the controller Jeffrey Hugo
2020-04-07 16:50 ` [PATCH v2 5/5] bus: mhi: core: Fix typo in comment Jeffrey Hugo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1586278230-29565-4-git-send-email-jhugo@codeaurora.org \
    --to=jhugo@codeaurora.org \
    --cc=hemantk@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).