linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "周琰杰 (Zhou Yanjie)" <zhouyanjie@wanyeetech.com>
To: sboyd@kernel.org, mturquette@baylibre.com, robh+dt@kernel.org,
	paul@crapouillou.net
Cc: linux-clk@vger.kernel.org, linux-mips@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	dongsheng.qiu@ingenic.com, aric.pzqi@ingenic.com,
	rick.tyliu@ingenic.com, sihui.liu@ingenic.com,
	jun.jiang@ingenic.com, sernia.zhou@foxmail.com
Subject: [PATCH v7 05/11] clk: Ingenic: Add missing clocks for Ingenic SoCs.
Date: Sat, 24 Jul 2021 17:34:40 +0800	[thread overview]
Message-ID: <1627119286-125821-6-git-send-email-zhouyanjie@wanyeetech.com> (raw)
In-Reply-To: <1627119286-125821-1-git-send-email-zhouyanjie@wanyeetech.com>

Add CIM, AIC, DMIC, I2S clocks for the X1000 SoC and the
X1830 SoC from Ingenic.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
---

Notes:
    v1->v2:
    Add I2S clock for X1000.
    
    v2->v3:
    Correct the comment in x1000-cgu.c, change it from
    "Custom (SoC-specific) OTG PHY" to "Custom (SoC-specific)",
    since there is more than just the "OTG PHY" clock.
    
    v3->v4:
    No change.
    
    v4->v5:
    1.Change X1000's I2S clock to CGU_CLK_PLL as Paul Cercueil's suggestion
    2.Add I2S clock for X1830.
    
    v5->v6:
    No change.
    
    v6->v7:
    No change.

 drivers/clk/ingenic/x1000-cgu.c | 88 ++++++++++++++++++++++++++++++++++++++++
 drivers/clk/ingenic/x1830-cgu.c | 90 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 178 insertions(+)

diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index 53e5fe0..59b16a6 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -60,6 +60,54 @@
 
 static struct ingenic_cgu *cgu;
 
+static void x1000_i2s_calc_m_n(const struct ingenic_cgu_pll_info *pll_info,
+		       unsigned long rate, unsigned long parent_rate,
+		       unsigned int *pm, unsigned int *pn, unsigned int *pod)
+{
+	unsigned int delta, m, n;
+	u64 curr_delta, curr_m, curr_n;
+
+	if ((parent_rate % rate == 0) && ((parent_rate / rate) > 1)) {
+		m = 1;
+		n = parent_rate / rate;
+		goto out;
+	}
+
+	delta = rate;
+
+	/*
+	 * The length of M is 9 bits, its value must be between 1 and 511.
+	 * The length of N is 13 bits, its value must be between 2 and 8191,
+	 * and must not be less than 2 times of the value of M.
+	 */
+	for (curr_m = 511; curr_m >= 1; curr_m--) {
+		curr_n = parent_rate * curr_m;
+		curr_delta = do_div(curr_n, rate);
+
+		if (curr_n < 2 * curr_m || curr_n > 8191)
+			continue;
+
+		if (curr_delta == 0)
+			break;
+
+		if (curr_delta < delta) {
+			m = curr_m;
+			n = curr_n;
+			delta = curr_delta;
+		}
+	}
+
+out:
+	*pm = m;
+	*pn = n;
+
+	/*
+	 * The I2S PLL does not have OD bits, so set the *pod to 1 to ensure
+	 * that the ingenic_pll_calc() in cgu.c can run properly.
+	 */
+	*pod = 1;
+}
+
 static unsigned long x1000_otg_phy_recalc_rate(struct clk_hw *hw,
 						unsigned long parent_rate)
 {
@@ -227,6 +275,27 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		},
 	},
 
+	[X1000_CLK_I2S] = {
+		"i2s", CGU_CLK_PLL,
+		.parents = { X1000_CLK_EXCLK, X1000_CLK_SCLKA, -1, X1000_CLK_MPLL },
+		.pll = {
+			.reg = CGU_REG_I2SCDR,
+			.rate_multiplier = 1,
+			.mux_shift = 30,
+			.mux_bits = 2,
+			.m_shift = 13,
+			.m_bits = 9,
+			.m_offset = 0,
+			.n_shift = 0,
+			.n_bits = 13,
+			.n_offset = 0,
+			.bypass_bit = -1,
+			.enable_bit = 29,
+			.stable_bit = -1,
+			.calc_m_n_od = x1000_i2s_calc_m_n,
+		},
+	},
+
 	/* Custom (SoC-specific) OTG PHY */
 
 	[X1000_CLK_OTGPHY] = {
@@ -359,6 +428,13 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.mux = { CGU_REG_SSICDR, 30, 1 },
 	},
 
+	[X1000_CLK_CIM] = {
+		"cim", CGU_CLK_MUX | CGU_CLK_DIV,
+		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL, -1, -1 },
+		.mux = { CGU_REG_CIMCDR, 31, 1 },
+		.div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 },
+	},
+
 	[X1000_CLK_EXCLK_DIV512] = {
 		"exclk_div512", CGU_CLK_FIXDIV,
 		.parents = { X1000_CLK_EXCLK },
@@ -410,6 +486,12 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.gate = { CGU_REG_CLKGR, 9 },
 	},
 
+	[X1000_CLK_AIC] = {
+		"aic", CGU_CLK_GATE,
+		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 11 },
+	},
+
 	[X1000_CLK_UART0] = {
 		"uart0", CGU_CLK_GATE,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
@@ -428,6 +510,12 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.gate = { CGU_REG_CLKGR, 16 },
 	},
 
+	[X1000_CLK_DMIC] = {
+		"dmic", CGU_CLK_GATE,
+		.parents = { X1000_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 17 },
+	},
+
 	[X1000_CLK_TCU] = {
 		"tcu", CGU_CLK_GATE,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
diff --git a/drivers/clk/ingenic/x1830-cgu.c b/drivers/clk/ingenic/x1830-cgu.c
index 59342bc..cfb0314 100644
--- a/drivers/clk/ingenic/x1830-cgu.c
+++ b/drivers/clk/ingenic/x1830-cgu.c
@@ -54,6 +54,54 @@
 
 static struct ingenic_cgu *cgu;
 
+static void x1830_i2s_calc_m_n(const struct ingenic_cgu_pll_info *pll_info,
+		       unsigned long rate, unsigned long parent_rate,
+		       unsigned int *pm, unsigned int *pn, unsigned int *pod)
+{
+	unsigned int delta, m, n;
+	u64 curr_delta, curr_m, curr_n;
+
+	if ((parent_rate % rate == 0) && ((parent_rate / rate) > 1)) {
+		m = 1;
+		n = parent_rate / rate;
+		goto out;
+	}
+
+	delta = rate;
+
+	/*
+	 * The length of M is 9 bits, its value must be between 1 and 511.
+	 * The length of N is 20 bits, its value must be between 2 and 1048575,
+	 * and must not be less than 2 times of the value of M.
+	 */
+	for (curr_m = 511; curr_m >= 1; curr_m--) {
+		curr_n = parent_rate * curr_m;
+		curr_delta = do_div(curr_n, rate);
+
+		if (curr_n < 2 * curr_m || curr_n > 1048575)
+			continue;
+
+		if (curr_delta == 0)
+			break;
+
+		if (curr_delta < delta) {
+			m = curr_m;
+			n = curr_n;
+			delta = curr_delta;
+		}
+	}
+
+out:
+	*pm = m;
+	*pn = n;
+
+	/*
+	 * The I2S PLL does not have OD bits, so set the *pod to 1 to ensure
+	 * that the ingenic_pll_calc() in cgu.c can run properly.
+	 */
+	*pod = 1;
+}
+
 static int x1830_usb_phy_enable(struct clk_hw *hw)
 {
 	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
@@ -201,6 +249,28 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
 		},
 	},
 
+	[X1830_CLK_I2S] = {
+		"i2s", CGU_CLK_PLL,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.pll = {
+			.reg = CGU_REG_I2SCDR,
+			.rate_multiplier = 1,
+			.mux_shift = 30,
+			.mux_bits = 2,
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 0,
+			.n_shift = 0,
+			.n_bits = 20,
+			.n_offset = 0,
+			.bypass_bit = -1,
+			.enable_bit = 29,
+			.stable_bit = -1,
+			.calc_m_n_od = x1830_i2s_calc_m_n,
+		},
+	},
+
 	/* Custom (SoC-specific) OTG PHY */
 
 	[X1830_CLK_OTGPHY] = {
@@ -328,6 +398,14 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
 		.mux = { CGU_REG_SSICDR, 29, 1 },
 	},
 
+	[X1830_CLK_CIM] = {
+		"cim", CGU_CLK_MUX | CGU_CLK_DIV,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_CIMCDR, 30, 2 },
+		.div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 },
+	},
+
 	[X1830_CLK_EXCLK_DIV512] = {
 		"exclk_div512", CGU_CLK_FIXDIV,
 		.parents = { X1830_CLK_EXCLK },
@@ -385,6 +463,18 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
 		.gate = { CGU_REG_CLKGR0, 9 },
 	},
 
+	[X1830_CLK_AIC] = {
+		"aic", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 11 },
+	},
+
+	[X1830_CLK_DMIC] = {
+		"dmic", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 12 },
+	},
+
 	[X1830_CLK_UART0] = {
 		"uart0", CGU_CLK_GATE,
 		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
-- 
2.7.4


  parent reply	other threads:[~2021-07-24  9:35 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-24  9:34 [PATCH v7 00/11] Add new clocks and fix bugs " 周琰杰 (Zhou Yanjie)
2021-07-24  9:34 ` [PATCH v7 01/11] clk: JZ4780: Add function for disable the second core 周琰杰 (Zhou Yanjie)
2021-07-24  9:34 ` [PATCH v7 02/11] clk: Ingenic: Adjust cgu code to make it compatible with I2S PLL 周琰杰 (Zhou Yanjie)
2021-08-19  9:37   ` Paul Cercueil
2021-08-27 17:46     ` Zhou Yanjie
2021-07-24  9:34 ` [PATCH v7 03/11] dt-bindings: clock: Add missing clocks for Ingenic SoCs 周琰杰 (Zhou Yanjie)
2021-07-24  9:34 ` [PATCH v7 04/11] clk: Ingenic: Fix problem of MAC clock in Ingenic X1000 and X1830 周琰杰 (Zhou Yanjie)
2021-08-19  9:39   ` Paul Cercueil
2021-07-24  9:34 ` 周琰杰 (Zhou Yanjie) [this message]
2021-07-24  9:34 ` [PATCH v7 06/11] clk: Ingenic: Clean up and reformat the code 周琰杰 (Zhou Yanjie)
2021-08-19  9:46   ` Paul Cercueil
2021-08-27 17:47     ` Zhou Yanjie
2021-07-24  9:34 ` [PATCH v7 07/11] dt-bindings: clock: Add documentation for JZ4775 and X2000 bindings 周琰杰 (Zhou Yanjie)
2021-07-24  9:34 ` [PATCH v7 08/11] dt-bindings: clock: Add JZ4775 clock bindings 周琰杰 (Zhou Yanjie)
2021-07-26 22:18   ` Rob Herring
2021-08-19  9:47   ` Paul Cercueil
2021-07-24  9:34 ` [PATCH v7 09/11] dt-bindings: clock: Add X2000 " 周琰杰 (Zhou Yanjie)
2021-07-26 22:19   ` Rob Herring
2021-08-19  9:48   ` Paul Cercueil
2021-07-24  9:34 ` [PATCH v7 10/11] clk: Ingenic: Add CGU driver for JZ4775 周琰杰 (Zhou Yanjie)
2021-07-24  9:34 ` [PATCH v7 11/11] clk: Ingenic: Add CGU driver for X2000 周琰杰 (Zhou Yanjie)
2021-08-19  6:44 ` [PATCH v7 00/11] Add new clocks and fix bugs for Ingenic SoCs Zhou Yanjie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1627119286-125821-6-git-send-email-zhouyanjie@wanyeetech.com \
    --to=zhouyanjie@wanyeetech.com \
    --cc=aric.pzqi@ingenic.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dongsheng.qiu@ingenic.com \
    --cc=jun.jiang@ingenic.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=paul@crapouillou.net \
    --cc=rick.tyliu@ingenic.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sernia.zhou@foxmail.com \
    --cc=sihui.liu@ingenic.com \
    --subject='Re: [PATCH v7 05/11] clk: Ingenic: Add missing clocks for Ingenic SoCs.' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).