linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH RFC V2 0/4] add Vertexcom MSE102x support
@ 2021-12-04 13:17 Stefan Wahren
  2021-12-04 13:17 ` [PATCH RFC V2 1/4] dt-bindings: add vendor Vertexcom Stefan Wahren
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Stefan Wahren @ 2021-12-04 13:17 UTC (permalink / raw)
  To: David S . Miller, Jakub Kicinski
  Cc: Rob Herring, Andrew Lunn, Michael Heimpold, jimmy.shen, netdev,
	linux-kernel, devicetree, Stefan Wahren

This patch series adds support for the Vertexcom MSE102x Homeplug GreenPHY
chips [1]. They can be connected either via RGMII, RMII or SPI to a host CPU.
These patches handles only the last one, with an Ethernet over SPI protocol
driver.

The code has been tested only on Raspberry Pi boards, but should work
on other platforms.

Any comments about the code are welcome.

Changes in V2:
- improve lock handling for RX & TX path
- add new patch to introduce IF_PORT_HOMEPLUG as suggested by Andrew Lunn
- address all the comments by Jakub Kicinski, Andrew Lunn, Kernel test robot

[1] - http://www.vertexcom.com/p_homeplug_plc_en.html

Stefan Wahren (4):
  dt-bindings: add vendor Vertexcom
  dt-bindings: net: add Vertexcom MSE102x support
  net: introduce media selection IF_PORT_HOMEPLUG
  net: vertexcom: Add MSE102x SPI support

 .../devicetree/bindings/net/vertexcom-mse102x.yaml |  71 ++
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 drivers/net/ethernet/Kconfig                       |   1 +
 drivers/net/ethernet/Makefile                      |   1 +
 drivers/net/ethernet/vertexcom/Kconfig             |  25 +
 drivers/net/ethernet/vertexcom/Makefile            |   6 +
 drivers/net/ethernet/vertexcom/mse102x.c           | 770 +++++++++++++++++++++
 include/uapi/linux/netdevice.h                     |   3 +-
 8 files changed, 878 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
 create mode 100644 drivers/net/ethernet/vertexcom/Kconfig
 create mode 100644 drivers/net/ethernet/vertexcom/Makefile
 create mode 100644 drivers/net/ethernet/vertexcom/mse102x.c

-- 
2.7.4


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2021-12-08 16:55 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-04 13:17 [PATCH RFC V2 0/4] add Vertexcom MSE102x support Stefan Wahren
2021-12-04 13:17 ` [PATCH RFC V2 1/4] dt-bindings: add vendor Vertexcom Stefan Wahren
2021-12-04 13:17 ` [PATCH RFC V2 2/4] dt-bindings: net: add Vertexcom MSE102x support Stefan Wahren
2021-12-04 13:17 ` [PATCH RFC V2 3/4] net: introduce media selection IF_PORT_HOMEPLUG Stefan Wahren
2021-12-06 19:29   ` Jakub Kicinski
2021-12-08 16:55     ` Stefan Wahren
2021-12-04 13:17 ` [PATCH RFC V2 4/4] net: vertexcom: Add MSE102x SPI support Stefan Wahren

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).