From: Amit Kucheria <amit.kucheria@linaro.org>
To: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
bjorn.andersson@linaro.org, edubezval@gmail.com,
andy.gross@linaro.org, David Brown <david.brown@linaro.org>
Cc: devicetree@vger.kernel.org
Subject: [PATCH v2 09/13] arm64: dts: sdm845: thermal: Add temperature sensors near major peripherals
Date: Fri, 29 Mar 2019 15:42:15 +0530 [thread overview]
Message-ID: <19d3a2e99cb5ebce63e5cd1e604d71f8a919828a.1553853990.git.amit.kucheria@linaro.org> (raw)
In-Reply-To: <cover.1553853990.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1553853990.git.amit.kucheria@linaro.org>
sdm845 has a total of 21 temperature sensors. Populate DT with
information about them.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 205 +++++++++++++++++++++++++++
1 file changed, 205 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 5308f1671824..7c0643ccef18 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2611,5 +2611,210 @@
};
};
};
+
+ aoss0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss0_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cluster0_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cluster0_crit: cluster0_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cluster1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cluster1_crit: cluster1_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ aoss1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ q6_modem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ wlan_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-hvx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ q6_hvx_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ video_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ modem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
};
};
--
2.17.1
next prev parent reply other threads:[~2019-03-29 10:13 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 01/13] arm64: dts: msm8998: thermal: split address space into two Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 02/13] arm64: dts: msm8998: efficiency is not valid property Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 03/13] arm64: dts: msm8916: thermal: Add sensor for modem Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 04/13] arm64: dts: msm8996: thermal: Add temperature sensors near major peripherals Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 05/13] arm64: dts: msm8998: thermal: Fix the cpu sensor numbers Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 06/13] arm64: dts: msm8998: thermal: Fix the gpu sensor number Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 07/13] arm64: dts: msm8998: thermal: GPU has two sensors, add the second Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 08/13] arm64: dts: msm8998: thermal: Add temperature sensors near major peripherals Amit Kucheria
2019-03-29 10:12 ` Amit Kucheria [this message]
2019-03-29 10:12 ` [PATCH v2 10/13] arm64: dts: msm8998: thermal: Make trip names consistent Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 11/13] arm64: dts: msm8916: " Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 12/13] arm64: dts: msm8996: " Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 13/13] arm64: dts: msm8916: thermal: Convert camera trip type to hot Amit Kucheria
2019-04-02 13:58 ` [PATCH v2 00/13] qcom: dts: thermal cleanups Marc Gonzalez
2019-04-02 18:46 ` Amit Kucheria
2019-04-23 9:31 ` Marc Gonzalez
2019-04-23 12:56 ` Amit Kucheria
2019-04-23 13:10 ` Marc Gonzalez
2019-04-24 14:30 ` Marc Gonzalez
2019-04-25 6:31 ` Amit Kucheria
2019-04-25 11:25 ` Marc Gonzalez
2019-04-25 12:02 ` Marc Gonzalez
2019-04-25 13:06 ` Marc Gonzalez
2019-04-25 13:16 ` Amit Kucheria
2019-04-23 19:14 ` Andy Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19d3a2e99cb5ebce63e5cd1e604d71f8a919828a.1553853990.git.amit.kucheria@linaro.org \
--to=amit.kucheria@linaro.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).