Linux 2.4.2ac14

Linux 2.4.2ac14

[Alan Cox]

	ftp://ftp.kernel.org/pub/linux/kernel/people/alan/2.4/

2.4.2-ac14
o	Fix the non build problem with do_BUG		(Andrew Morton)
o	Fix interface autocreation bug in ipx		(Arnaldo Carvalho
	Also fix pprop routing bugs, tctrl handling	 de Melo)
	Fix wrong comments, fix ipx sysctl handling
	clean up code
o	Updated i810_audio.c 				(Doug Ledford)
o	Fix up printer status readback			(Tim Waugh)
o	Add support for "ide=nodma" on command line	(Arjan van de Ven)
o	More spelling fixes				(Dag Wieers)
o	Add pci vendor table to lanstreamer		(Mike Sullivan)
o	Do extra sanity checks on ext2 mount		(Andreas Dilger)
o	Multithreaded core dump handling		(Don Dugger)
	| This is fairly experimental so the more eyes
	| the better but it does sort out a very annoying weakness
o	Prefetch on lists for parisc and x86		(Arjan Van de Ven,
	| Work about 4% on scheduler performance on PIII Matthew Wilcox)
o	Natsemi power management changes		(Tjeerd Mulder)
o	Fix assorted smb bugs				(Urban Widmark)
o	Fix a sisfb build problem			(Andrew Morton)

2.4.2-ac13
o	Clean up mad16 detection stuff			(Pavel Rabel)
o	Fix epca unload					(Andrey Panin)
o	Change null apic handling			(Maciej Rozycki)
o	aicasm now uses db3				(Sergey Kubushin)
o	Fix aic7xxx cross compile			(Cort Dougan)
o	Merge small net driver fixups/config fixes	(Jeff Garzik)
o	Update symbios drivers				(Gérard Roudier)
o	Rusty has moved					(Rusty Russell)
o	3c509/3c515 compile fixes			(Jeff Garzik)
o	Console locking updates - should fix vesafb	(Andrew Morton)
	clock problems
o	Merge the serial.c 5.0.5 update			(Jeff Garzik, 
							Ted Ts'o)
o	Merge SiS framebuffer updates			(Can-Ru Yeou)
o	Update ctrlfb					(Takashi Oe,
							 Michel Lanners)
o	Add epson 640U scanner to the usb scanner list	(Patrick Dreker)

2.4.2-ac12
o	Move the pci_enable_device for cardbus		(David Hinds)
o	Add Sony MSC-U01N to the unusual devices	(Marcel Holtmann)
o	Final smc-mca fixups - should now work		(James Bottomley)
o	Document kernel string/mem* functions		(Matthew Wilcox)
	| and I added a memcpy warning
o	Update VIA IDE driver to 3.21			(Vojtech Pavlik)
	|No UDMA66 on 82c686, fix /proc and udma on
	|686b, fix dma disables
o	Allow sleeping in ctrl-alt-del callbacks	(Andrew Morton)
	|Fix i2o, dac960, watchdog, gdth hangs on exit
o	Fix binfmt_misc (and make the proc handling	(Al Viro)
	|a filesystem -
	|mount -t binfmt_misc none /proc/sys/fs/binfmt_misc
o	Update the ACI support for sound/radio stuff	(Robert Siemer)
o	Add RDS support to miroRadio			(Robert Siemer)
o	Remove serverworks handling. The BIOS is our	(me)
	best (and right now only) hope for that chip
o	Tune the vm behavioru a bit more		(Mike Galbraith)
o	Update PAS16 documentation			(Thomas Molina)
o	Reiserfs tools recommended are now 0d not 0b	(Steven Cole)
o	Wan driver small fixes				(Jeff Garzik)
o	Net driver fixes for 3c503, 3c509, 3c515,	(Jeff Garzik)
	8139too, de4x5, defxx, dgrs, dmfe, eth16i, 
	ewrk3, natsemi, ni5010, pci-skeleton, rcpci45,
	sis900, sk_g16, smc-ultra, sundance, tlan,
	via-rhine, winbond-840, yellowfin, wavelan_cs
	tms380tr
o	Trim 3K off the aha1542 driver size	(Andrzej Krzysztofowicz)
o	Trim 1K off qlogicfas			(Andrzej Krzysztofowicz)
o	Fix openfirmware/mm boot on ppc			(Cort Dougan)
o	Fix topdir handling in Makefile			(Keith Owens)
o	Minor fusion driver updates			(Steve Ralston)
o	Merge Etrax cris updates			(Bjorn Wesen)
o	Clgen fb copyright update			(Jeff Garzik)
o	AGP linkage fix					(Jeff Garzik)
o	Update visor driver to work with minijam	(Arnim Laeuger)
o	Fix a usb devio return code			(Dan Streetman)
o	Resync a few other net device changes with the
	submits Jeff sent to Linus			(Jeff Garzik)
o	Add missing md export symbol			(Mohammad Haque)

2.4.2-ac11
o	Fix NLS Config.in				(David Weinehall)
o	Sort out one escaped revert from the megaraid	(me)
	update
o	Resync with Linux 2.4.3pre1
	| Except tulip the network driver changes have
	| been used to replace the existing ones
o	Fix parport case where a reader could get stuck	(Tim Waugh)
o	Add ALi15x3 to the list of isa dma hangs	(Angelo Di Filippo)
o	Fix nasty bug in IPX routing of netbios frames	(Arnaldo Carvalho
							 de Melo)
o	Misc code cleanups				(Keith Owens)
o	Updated 3c527 driver				(Richard Proctor)
o	Further tulip updates				(Jeff Garzik)
o	i810_rng fixes (FIPS test, regions)		(Jeff Garzik)
o	Further cs89x0 cleanups				(Andrew Morton)
o	Further USB hub updates				(Dave Brownell)
o	Mall USB resource cleanup			(Jeff Garzik)
o	Resync hp100 changes from Jeff Garzik		(Jeff Garzik)
o	PCI documentation update			(Tim Waugh)
o	Fix irda crash					(Jean Tourrilhes)
o	PPC updates					(Cort Dougan)
o	Resync dmfe, hamachi, pci-skeleton and winbond	(Jeff Garzik)

2.4.2-ac10
o	Add ZF-Logic watchdog driver			(Fernando Fuganti)
o	Add devfs support to USB printers		(Mark McClelland)
o	Fix baud rate handling on keyspan		(Paul Mackerras)
o	USB documentation update			(Dave Brownell)
o	Fix disconnect leak				(Randy Dunlap)
o	ARM constants/fixes				(Russell King)
o	Includes for integrator ARM architecture	(Russell King)
o	Update NLS descriptions to be clearer		(Pablo Saratxaga)
o	Add iso-8859-13 (latvian/lithuanian)		(Pablo Saratxaga)
	iso-8859-4, cp1251 (windows cyrillic), cp1255
	(windows hebrew), and some alises
o	Merge 1.14 Megaraid driver			(Venkatesh Ramamurthy)
o	Reapply other fixes this version dropped	(me)
o	Reformat and clean up ifdefs in 1.14 Megaraid	(me)
o	I/O apnic locking fixes				(Maciej Rozycki)
o	Print ioapic id to help debugging		(Maciej Rozycki)
o	Make the tpqic driver work			(Hugh Dickins)
o	USB scanner updates				(David Nelson)
o	Fix usbdevfs multimount				(Al Viro)
o	Fix wrong calculation of path buffer size	(Hugh Dickins)
o	cs89x0 allocated far too much memory		(Hugh Dickins)

2.4.2-ac9
o	misc device fix (ps/2 and drm are now back)	(Tachino Nobuhiro)
	| Believe it or not my main test box used no misc
	| device files..
o	Radeon build without 8bit			(Cha Young-Ho)
o	Fix oops in scc driver				(Andrew Morton)
o	Add __setup for ISAPnP, update docs		(Jaroslav Kysela)
o	Update E820 table sanitizer			(Brian Moyle)
o	i810 audio updates/mmap fixes			(Doug Ledford)
o	Be paranoid about VIA chipset configurations	(Arjan van de Ven)
	| Fixing VIA disk corruption bugs take 2
o	Fix PPC request_irq problems, some fpu emu	(Cort Dougan)
	and timers
o	Allow scsi drivers to limit request sizes	(Jens Axboe,
	(and fixed by Tim)				 Tim Waugh)
o	Configure.help cleanups				(Steve Cole)
o	Loop device fix of the day			(Jens Axboe)
o	CDROM fixes					(Jens Axboe)
o	Reiserfs crash on fsync of dir fix	(Alexander Zarochentcev)

2.4.2-ac8
o	Fix loop over loop crash			(Jens Axboe)
o	Fix radeon build problems			(ISHIKAWA Mutsumi)
o	Stop two people claiming the same misc dev id	(Philipp Rumpf)
o	capable not suser on sx.c			(Rob Radez)
o	Fix an ixj build combination bug	(Andrzej Krzysztofowicz)
o	Add integrator to ARM machines			(Russell King)
o	ARM include/constant cleanups			(Russell King)
o	Update ARM vmlinuz.in				(Russell King)
o	ARM i2c fixes					(Russell King)
o	ARM scsi updates				(Russell King)
o	ARM header updates				(Russell King)
o	Handle E820 bios returns with overlaps		(Brian Moyle)
o	Fix a sparc64 include build bug		(Andrzej Krzysztofowicz)
o	Loop race fix					(Jens Axboe)
o	s_maxbytes wasnt set for old style compat	(Chris Dukes)
	mounts in reiserfs
o	Fix the fact we dont see all busses on some	(Don Dupuis)
	Compaq machines
o	Fix missing watchdog configure.help		(Jakob Ostergaard)
o	Fix oom deadlock (hopefully)			(Rik van Riel)
o	Fix binfmt_aout sign handling bug		(Andrew Morton)

2.4.2-ac7
o	Fusion driver updates				(Steve Ralston)
o	Olympic fix					(Andrew Morton)
o	Work around hardware bug in older Rage128	(Gareth Hughes)
o	Handle broken PIV MP tables with a NULL ioapic
o	Use capable in esp serial driver		(Rob Radez)
o	Use capable not suser in console		(Rob Radez)
o	Small networking fixups				(Dave Miller)
o	Fix make menuconfig breakage			(Keith Owens)
o	Enable cmpxchg8 on Rise P6			(Dave Jones)
o	Fix wakeup losses on cpu_allowed using tasks	(Manfred Spraul)
o	Maestro3 now works with > 256Mb of ram		(Zach Brown)
o	Opl3sa2 isapnp=0 handling was wrong		(Jérôme Augé)
	| I've fixed it a little differently however
o	Turn off slow kmem chain check if not doing	(Ingo Molnar, me)
	slab debugging
o	Fix cpu speed checking code			(Mikael Pettersson)
o	Make bus computation more accurate		(me)
o	Advantech watchdog driver			(Marek Michalkiewicz)
o	dz.c serial clean up				(Rob Radez)
o	Fix MSG_TRUNC for OOB TCP			(Ingo Molnar)
o	Fix oops on unconfigured loop			(Arjan van de Ven)
o	Drop nbd ll_rw_blk change			(Linus has spoken ;))
o	pci resource api				(Jeff Garzik)
o	Further Natsemi updates				(Don Becker, 
							 Jeff Garzik)
o	Switch aurora serial to capable()		(Rob Radez)
o	Radeon frame buffer				(Ani Joshi)

2.4.2-ac6
o	Remove incorrect modules doc changes		(Keith Owens)
o	Fix elf.h defines				(Keith Owens)
o	Add 0x2B mtrr decode for intel/cyrix III	(me)
o	Make bigmem balancing somewhat saner		(Mark Hemment)
o	Update irda 					(Dag Brattli)
o	New FIR dongle support				(Dag Brattli)
o	3ware driver updates				(Adam Radford)
o	Further reiserfs tail conversion fixes		(Chris Mason)
o	Fix tpqic02 to use capable			(Rob Radez)
o	Set last_rx on comtrol hostess driver		(Arnaldo Carvalho 
							 de Melo)
o	Raid Oops fix					(Neil Brown)
o	Fix last_rx/skb refs on cyc_x25			(Arnaldo Carvalho 
							 de Melo)
o	Fix last_rx/skb refs on 3c589			(Arnaldo Carvalho 
							 de Melo)
o	Highmem fixes for deadlock			(Andrea Arcangeli,
							 Ingo Molnar)
o	Another minor tulip fix				(Jeff Garzik)
o	Fix hinote and maybe other ps/aux hangs		(me, Mark Clegg)
o	Fix resource handling on 53c7xxx		(Rasmus Andersen)
o	Fix scsi_register failure handling on AMD scsi	(Rasmus Andersen)
o	Fix resource handling on aha1740		(Rasmus Andersen)
o	Fix resource handling on blz1230		(Rasmus Andersen)
o	Fix resource handling for dec_esp driver	(Rasmus Andersen)
o	Fix resource handling for fastlane scsi		(Rasmus Andersen)
o	Fix scsi_register failure on qlogic_fas		(Rasmus Andersen)
o	Fix scsi_register failure on qlogicfc		(Rasmus Andersen)
o	Fix irq alloc failure leak on sun3x_esp		(Rasmus Andersen)
o	Fix wd7000 init failures			(Rasmus Andersen)
o	Fix nbd device					(Steve Whitehouse)
o	Fix try_atomic_semop				(Manfred Spraul)
o	Parport fixes					(Tim Waugh)
o	Starfire start/stop if fix			(Ion Badulescu)
o	Fix raw.c off by one bug			(Tigran Aivazian)
o	USB hub kmalloc wrong size corruption fix	(Peter Zaitcev)

2.4.2-ac5
o	Add Epson 1240U scanners to usb scanner		(Joel Becker)
o	Fix eth= compatibility				(Andrew Morton)
	| Should fix 3c509 problems for one
o	Add Pnp table to opl3sa2			(Bill Nottingham)
o	Update loop driver fixes			(Jens Axboe, Andrea
							 Arcangeli, Al Viro)
o	Fix busy loop in usb storage			(Arjan van de Ven)
o	Add cardbus support to olympic			(Mike Phillips)
o	Make BUG() configurable to save space		(Arjan van de Ven)
o	Add configurability to most kernel debugging	(various people)
	functions on x86
o	Richard Günther/binfmt_misc page move		(Richard Günther)
o	Fix de4x5 crash					(Nikita Schmidt)
o	Hopefully fix the smc-mca driver		(me)
o	Don't run the disk queue if we didnt launder	(Marcelo Tosatti)
	any pages
o	ALi 6 channel audio and sp/dif updates		(Matt Wu)
o	Fix USB thread wakeup scheduling		(Arjan van de Ven)
o	Fix alignment problems with uni16_to_x8		(Ivan Kokshaysky)

2.4.2-ac4
o	Fix Make xconfig failure			(J Magallon)
o	Fix a typo in the ISDN docs			(Jim Freeman)
o	Fix the 3ware driver a bit more			(Ben LaHaise)
	| should now be usable
o	Update Dave Jones contact info			(Dave Jones)
o	Revert wavelan inline->macro change		(Jean Tourillhes)
	| CVS gcc and 2.96-74 don't accidentally unline it now
o	Zerocopy TCP/IP patches				(Dave Miller, 
							 Alexey Kuznetsov,
							 and many more)
o	Fix up command line options to old ncr driver	(Martin Storsjö)
o	NFS locking should call fs layer locking if	(Brian Dixon)
	present
o	Fix cs46xx wakeup/poll problem			(David Huggins-Daines)
o	Add some missing MTD config help texts		(Steven Cole,
							 David Woodhouse)
o	Fix Alpha build bug				(Sven Koch)
o	Final i386/ptrace bit
o	Finish off the vmalloc/WP fixup			(me)
o	Include file config.h fixes			(Niels Jensen)
o	More dscc4 updates				(Francois Romieu)

2.4.2-ac3
o	Add documentation for the fb interfaces		(Brad Douglas)
o	Work around apic disable_irq hardware bugs	(Maciej Rozycki)
o	Rage128 not "Rage 128"				(Brad Douglas)
o	Make ioremap debugging conditional		(J Magallon)
o	Merge Ninja pcmcia scsi driver			(YOKOTA Hiroshi)
o	Update 8139too docs				(Jeff Garzik)
o	Tulip updates, merge bits from 0.92 		(Jeff Garzik,
							 Don Becker)
o	Epic100 update					(Jeff Garzik)
o	Clean up Ariadne driver				(Jeff Garzik)
o	Remove dead wavelan prototype			(Jeff Garzik)
o	Remove unused arlan variable			(Jeff Garzik)
o	Clean up lance public symbols			(Jeff Garzik)
o	Switch fmv18x to spinlocks, fix other bits	(Jeff Garzik)
o	Clean up acenic global symbols			(Jeff Garzik)
o	Fix IDE blocking kmalloc with irqs off		(Arjan van de Ven)
	| I've redone the code a bit so it might be wrong again 8)

2.4.2-ac2
o	Merge the loop device fixes			(Jens Axboe)
o	Fix af_unix SYSCTL=n build failure		(Russell King)
o	Adjust the throttling point for write		(Jens Axboe)
	throttles
o	Fix sunhme ioremap				(Andrey Panin)
o	Fix disk change handling with removable sd	(Alex Davis)
o	Update/fix irq docs				(Matthew Wilcox)
o	Update PPC gmac and ncr885e drivers		(Cort Dougan)
	| bmac patch dropped as it loses other fixes
o	Kai Petzke has moved				(Kai Petzke)
o	Fix starfire driver so pump doesnt kill it	(Ion Badulescu)

2.4.2-ac1
o	Merge Linus 2.4.2 tree
	| We now have disagreeing ymfpci fixes. I've kept the ones
	| I tested for now.
o	Back out sr.c change				(me)
o	Fix moxa smartio driver				(Tom Mraz)
o	Hugh Blemings change of address			(Hugh Blemings)
o	Allow more i2o config time for slow calls
o	Aty128fb updates				(Brad Douglas,
						      Benjamin Herrenschmidt,
							 Michel Danzer,
							 Andreas Hundt)
o	Add "loop" name to the root dev names		(Barry Nathan)
o	Further spelling cleanups			(Dag Wieers)
o	Remove bogus warning emissions from aha1740	(Nick Holloway)
o	Remove surplus assignment in vmalloc		(Francis Galiegue)
o	Remove unneeded ifdef in i386/kernel/irq.c	(Francis Galiegue)
o	Add door locking ioctl to ide-floppy		(Francis Galiegue)
o	Allow scsi disk opening O_NDELAY for removables	(me)
o	Fix cosa compile warnings			(me)
o	Clean up dumpable/setuid write ordering		(me)
o	Hopefully fix the 3ware crashes 		(me)

2.4.1-ac20
o	Update fusion drivers				(Steve Ralston)
o	Further VM page launder balancing		(Rik van Riel)
o	Hopefully fix ext2 block size checking		(Andries Brouwer)
o	Update the i810 random number generator		(Jeff Garzik)
o	Hopefully fix the bonding crash on down/reboot	(Dave Miller)
o	Tulip update (add accton comets, clean up pm)	(Jeff Garzik)
o	Merge wavelan_cs, pcnet_cs and fmvj18x_cs	(Jeff Garzik)
	changes from Dave Hinds tree
o	Make awe32 behave in 2.4 like 2.2 if given an	(Bill Nottingham)
	io
o	Fix alpha build problems in stallion, c101     (Andrzej Krzysztofowicz)
	synclink and wavfront drivers
o	Add isa_check_signature and missing ioctl ids  (Andrzej Krzysztofowicz)
	for hayesesp
o	Fix math emulation bug				(Martin Schwidefsky)
o	Disable APIC during APM to avoid suspend/resume (Mikael Pettersson)
	problems.
o	SMP kernel on UP hardware APIC fixes		(Maciej Rozycki)
o	Code cleanups in nmi, reduce NMI rate to 1Hz	(Mikael Pettersson)

2.4.1-ac19
o	Fix second module/exception table race		(me)
	| I hope ;)
o	Additional CPIA usb ident			(Adam J Richter)
o	Add SA1100 udc and also stall recovery to 	(Oleg Drokin)
	usbnet
o	Limit smbfs to 2Gig/file			(Urban Widmark)
o	Config/doc update for the eicon driver		(Armin Schindler)
o	Update PMS driver to new request_region		(Andrey Panin)
o	sys_semop bug check is overcareful		(Hugh Dickins)
o	Fix ipc off by one on checks in ipc		(Hugh Dickins)
o	Allow exceptions during module init		(Philipp Rumpf)
o	Driver namespace cleanup			(Jeff Garzik)
o	Network driver cleanups				(Jeff Garzik, 
o	PPC irq updates					(Paul Mackerras)
o	SMP fixes for PPC boxes				(Paul Mackerras)
o	Fix tmpfs block size reporting			(Christoph Rohland)
o	Update maintainers to add missing YAM maintainer(Jean-Paul Roubelat)
o	Add hooks for /proc/rtas			(Paul Mackerras)
o	Fix wrong bogomip reporting on SMP ppc		(Paul Mackerras)
o	Remove unused dbcf inline function on PPC	(Paul Mackerras)
o	Update Cort Dougans email/urls			(Paul Mackerras)
o	Dont assume bit settings on pcnet/pci chips	(Paul Mackerras)
o	Add mac ppc serial console hooks		(Paul Mackerras)
o	Frame buffer driver updates for ppc		(Paul Mackerras)
o	Fix devfs names for ppc serial			(Paul Mackerras)
o	Move some symbols out of net where they didnt	
	belong, and into right export locations     (Andrzej Krzysztofowicz)
o	Tidy and fix up syncppp drivers			(Krzysztof Halasa)

2.4.1-ac18
o	Fix SO_SNDTIMEO bugs				(Alexey Kuznetsov)
o	Fix tmpfs fsync					(Lennert Buytenhek)
o	PPC now uses generic pci bus setup		(Paul Mackerras)
o	Remove PPC boot argument printing		(Paul Mackerras)
o	Jeff Tranter has moved				(Jeff Tranter)
o	ymf_pci driver cleanups				(Pete Zaitcev)
o	Fix USB 2.0 compliance in hub.c			(Brad Hards)
o	Fix usb hub device claim race			(Paul Mackerras)
o	Fix some bugs in mac_hid driver			(Paul Mackerras)
o	Fix more typos					(Dag Wieers)
o	PPC compile warnings/symbol export fixes	(Paul Mackerras)

2.4.1-ac17
o	Fix pegasus for bigendian			(Roman Weissgaerber)
o	Further smbfs fixes				(Urban Widmark)
o	Update ISDN version tags			(Kai Germaschewski)
o	Finish ISDN move to new style module_init	(Kai Germaschewski)
o	Small Eicon driver updates/fix license bug	(Armin Schindler)
o	Fix reiserfs tail packing problem		(Alexander Zarochentcev
							 Chris Mason)
o	Export aci symbols from drivers/sound/aci.c	(Alexandr Kanevskiy)
o	Merge Linus 2.4.2pre4
o	Starfire update					(Ionu Badulescu)
o	Fix 3270 merge					(Richard Hitt)

2.4.1-ac16
o	Fix the exception table/unload race		(me)
o	Further tulip fixup				(Manfred Spraul)
o	Fix USB oops on traverse/delete race		(Randy Dunlap)
o	Set max_sectors to 255 for hd/xd drivers	(Paul Gortmaker)
	| This should make them work again
o	Fix typo in USB makefile			(Arjan van de Ven)
o	Fix accidental change to scsi_scan		(Steve Ralston)
o	Hid rollover/endian fixes			(Paul Mackerras)
o	Drop via pci fixup				(me)
o	Further hp5300 fixups				(Arjan van de Ven)
o	PCnet 32 init changes for non SEPROM cards	(Eli Carter)
o	Fix acpi idle reporting on SMP			(Philipp Hahn)
o	Add non PCI pci device list walk macro		(me)
	| pointed out by Mikael Pettersson
o	IBM S/390 3270 drivers				(Richard Hitt)

2.4.1-ac15
o	Fix the non booting winchip/cyrix problem	(me)
	| Nasty interaction with the vmalloc fix 
	| wants a cleaner solution. This one is a hack
	| to get people up and running again
o	Fix typo in vfat changes			(OGAWA Hirofumi)
o	Update scsi blacklist table			(Karsten Hopp)
o	dscc4 wan driver update				(Francois Romieu)
o	Fix clgenfb warning				(Bryan Headley)
	
2.4.1-ac14
o	Fix tulip problems introduced by in ac13	(Manfred Spraul)
o	S/390x build fixes				(Ulrich Weigand)
o	Fix off by one error in octagon driver		(David Woodhouse)
o	Fix dasd driver for new queues			(Holger Smolinksi)
o	Networking standards compliance fixes
o	Fix binary layout assumptions in sym53c416	(Arjan van de Ven)
o	tmpfs timestamps				(Christoph Rohland)
o	Further mkdep changes				(Keith Owens)
o	Fix 16bit vfat handling				(OGAWA Hirofumi)
o	JIS nls fixes					(OGAWA Hirofumi)
o	Handle more than 8 luns				(Eric Youngdale,
							 Doug Gilbert)
o	Minor scsi clean ups				(Eric Youngdale)

2.4.1-ac13
o	Fix pnic tulip problems				(Manfred Spraul)
o	Fix USB printer read and poll problems		(Johannes Erdfelt)
o	Fix parport pci list corrupt bug		(Tim Waugh)
o	Fix sbpcd driver crashes			(Paul Gortmaker)
o	Clarify the locking doc				(Rusty Russell)
o	i810 audio doesnt need OSS			(Jeff Garzik)
o	Fix vmalloc fault race				(Mark Hemment)
o	Makedep fixes					(Keith Owens)
o	Fix missing unlock_kernel on usb hub		(Paul Mundt)
o	Fix smbfs+bigmem, buffer and listing bugs	(Urban Widmark)
o	Merge tms380 isa token ring support		(Jochen Friedrich)
o	Sigmatel change didnt help, removed		(Jeff Garzik)

2.4.1-ac12
o	Make tmpfs use link counts of 2 on directories	(Christoph Rohland)
o	Update Documentation/sound/Introductions	(Wade Hampton)
o	Fix bug in new tlb shootdown code		(Ben LaHaise)
o	Add isa_* api to the Alpha			(Richard Henderson)
o	Export down_trylock on Alpha			(Richard Henderson)
o	Fix maestro3 build on ia64			(Bill Nottingham)

2.4.1-ac11
o	Hack the setup code to do the right thing for	(me)
	Cyrix processors. Cpuid on cyrix should now work
o	Change sigmatel codec inits			(Jeff Garzik)
o	Revised TLB shootdown patch			(Ben LaHaise)
o	Use pci quirks to handle the nonstandard irq	(Andrey Panin)
	setup for VIA ACPI
o	If a user sets an io on the opl3sa2 assume they (me)
	mean it even if isapnp isnt turned off
o	Fix xmms cpu burn on i810 audio			(Marcus Sundberg)
o	Fix pnic problems with tulip driver		(Manfred Spraul)
o	Add pci skeleton driver				(Jeff Garzik)
o	Fix vfat mishandling of 16bit characters	(Kazuki Yasumatsu)
o	Fix syntax things found by his source code	(Jean-Luc Leger)
	analyser
o	Fix pcmcia ixj build bug			(Florian)
o	Remove dead via sound docs			(Jeff Garzik)
o	add __dev_alloc_skb for drivers needing to force(Jeff Garzik)
	allocation types
o	Fix arcnet initializers				(Jeff Garzik)
o	Fix various warnings				(Keith Owens)
o	Further MPT fusion updates			(Steve Ralston)
o	sock_alloc_send_skb fix				(Manfred Spraul)
o	Fix signed/unsigned handling on 8139too		(Jeff Garzik)
o	Document problem with old powertweak		(Dave Jones)
o	s/controler/controller/ spelling fixes
o	S/390 build fixes				(Neale Ferguson)

2.4.1-ac10
o	Merge with Linus 2.4.2pre3
o	More net driver clean up			(Jeff Garzik)
o	Further maxiradio fix				(Francois Romieu)
o	Lock reclaiming fixes				(MCL)
o	Update ver_linux				(Steven Cole)
o	Add support for the Socket LP-E CF+ ethernet	(Nicolas Pitre)
o	Fix microtek scanner abort handling		(Oliver Neukum)
o	Fix very dumb bug in my dma.c changes that 	(me)
	Linus noticed
o	Clean up AGP alloc/destroy a little 		(me)
	| Again a Linus request
o	Remove dead 8129 config help			(Dave Jones)
o	Clean up extra unneeded check in setup.c	(Dave Jones)
o	Improve mkdep, remove acpi special case		(Keith Owens)
o	Fix bogus dead comment in fs.h			(Jens Axboe)
o	Clean up config.in syntax errors		(Christoph Hellwig)
o	Offer Duron in CPU option list for clarity	(Terje Rosten)
o	New binutils need --oformat, old ones handle it	(Andreas Jaeger)
o	Move bitops include in fs.h inside __KERNEL__	(Herbert Xu)
o	Fix misspellings of weird			(Felix Odenkirchen)
o	Fix typos of 'valid' while we are at it		(Luuk van der Duim)

2.4.1-ac9
o	Merge with Linus 2.4.2pre2
o	Highmem bounce fixes				(Ingo Molnar)
o	Fix cosa driver kfree				(Jan Kasprzak)
o	Clean up pdoc202xx driver sleeps		(Vojtech Pavlik)
o	Final bits of NFS file handle changes		(Trond Myklebust)
o	Fix usbnet driver 				(David Brownell)
o	ATM includes fixes				(Werner Almesberger)
o	Remove unneeded vm_enough_memory check		(Werner Almesberger)
o	Fix free_dma prototype case			(Bill Nottingham)
o	Fix build bugs from pci_match_device fix	(me)
o	HP5300 USB scanner driver			(Oliver Neukum,
							 John Fremlin,
							 Jeremy Hall)
o	DSP_SETFRAGMENT fixes for ymfpci		(Pavel Roskin)
o	Fix codafs error returns			(Rob Radez)
o	Fix 48 misspellings of interrupt		(André Dahlqvist)
o	Fix 20 misspellings of successful		(André Dahlqvist)
o	Fix 11 misspellings of suppress			(André Dahlqvist)
o	Fix 46 misspellings of address			(André Dahlqvist)
o	Fix 26 misspellings of receive			(André Dahlqvist)
o	Fix 7 misspellings of acquire			(André Dahlqvist)
o	Fix 4 misspellings of unneccessary		(André Dahlqvist)
o	Fix 13 misspellings of until			(André Dahlqvist)

2.4.1-ac8
o	Fix irlap speed changes and kfrees		(Jean Tourrilhes)
o	Further NTFS updates				(Anton Altaparmakov,
						Yuri Per, Rob Radez)
o	Fix buglets in config.in for aic7xxx	       (Andrzej Krzysztofowicz)
o	Cleanup irda QoS code				(Jean Tourrilhes)
o	Fix mca documentations				(Rob Radez)
o	Fix irlan device attach problems		(Dag Brattli)
o	Fix irda dongle crash case			(Dag Brattli)
o	Change Kaweth firmware loading, add DU-E10	(Eric Sandeen)
o	pci_enable cleanups for networking		(Jeff Garzik)
o	Fix rcpci45 probing				(Jeff Garzik)
o	Use SET_MODULE_OWNER() in lanstreamer		(Jeff Garzik)
o	Use pcmcia defines as per seperate pcmcia net	(Jeff Garzik)
o	Fix people calling netif_start_queue from a 	(Jeff Garzik)
	timeout
o	Remove 8129 driver (use 8139too)		(Jeff Garzik)
o	Remove dead malloc.h from net drivers		(Jeff Garzik)
o	Update eata driver to 6.04			(Dario Ballabio)
o	Add DE320 support to ne2.c			(Alfred Arnold)
o	Kernel hacking doc updates			(John Levon)
o	Fix CPU detection offsets in head.S		(Mikael Pettersson)
o	Fix apic init/cpu detect problems		(Mikael Pettersson)

2.4.1-ac7
o	Rebalance the 2.4.1 VM				(Rik van Riel)
	| This should make things feel a lot faster especially
	| on small boxes .. feedback to Rik
o	Silence osf syscall error printk		(Ivan Kokshaysky)
o	Don't trust ARC irq routing on ruffian		(Ivan Kokshaysky)
o	Report the right module on 3c59x for pcmcia	(Arjan van de Ven)
o	Update i82365 driver to add locks, delays, and	(Arjan van de Ven)
	'bouncing' on the card detect
o	Get the name right on ide-cs (v ide_cs) and do	(Arjan van de Ven)
	resource claims
o	Merge parport_cs				(David Hinds)
o	Merge sedlbauer_cs				(Marcus Niemann)
o	Fix a bug in the Cyrix pirq routing		(me)

2.4.1-ac6
o	Fix eepro100 reporting on lockup fix		(Ion Badulescu)
o	Clean up i810 error message			(me)
o	Fix S390 build bug				(me)
o	Update version id on cpqarray driver		(Charles White)
o	Further aic7xxx fixes				(Doug Ledford)
	| again please report aic7xxx stuff to Doug
o	Further maxiradio cleanups		(Dimitromanolakis Apostolos)
o	Change ide to use mdelay cleanly		(Petr Vandrovec)
	| Still broken for PROMISE if no IDE_CS
o	Fix duplicated ncpfs fix			(Petr Vandrovec)
o	Improve inode hash function			(Dave Miller)
o	Correct 62 misspellings of transferred		(Andre Dahlqvist)
o	Update AC97 codec setup and tables		(Jeff Garzik)

2.4.1-ac5
o	Fix zero page corruption			(Ben La Haise)
o	Elevator corruption fixes			(Jens Axboe, Linus)
o	Fix fdatasync possible corruption problem	(Arjan van de Ven)
o	Further KSLI ethernet fixes			(Eric Sandeen)
o	Merge the correct version of the pm fixes	(me)
	| noted by Mikael Pettersson
o	Account for inode/dcache in free memory 	(Rik van Riel)
o	Add info on how to check reiserfsprogs versions	(Steven Cole)
o	Disable write combining on serverworks LE chips	(Mark Rusk)
o	Fix via audio crashes				(Jeff Garzik)
o	Fix ip accounting rules bug			(Rusty Russell)
o	Handle USB printers that use device not 	(Johannes Erdfelt)
	interface descriptors
o	Fix wheel on graphire usb tablet		(Peter Hofmann)
o	Clean up maxiradio driver			(Francois Romieu)
o	Fix visor USB size reporting on buffers		(Greg Kroah-Hartmann)
o	Update USB serial documentation			(Greg Kroah-Hartmann)
o	Fix locking on etherworks3 ethernet		(Jeff Garzik)
o	Fix empeg USB driver problems			(Gary Brubaker)
o	Generic USB serial driver fixes			(Greg Kroah-Hartmann)
o	Update USB serial configure.help		(Greg Kroah-Hartmann)
o	Add more device support to mct_u232 USB		(Cornel Ciocirlan)
o	Fix typo in asm-ppc/semaphore.h			(Andre Dahlqvist)
o	Report reiserfs tools in ver_linux		(Steven Cole)
o	Fix resource leaks in NCR_53c406, atari_scsi	(Rasmus Andersen)
	and qlogicisp
o	Move pci_enable_device earlier for hamachi	(Dave Jones)
o	Type 6 drives are apparently floppy 2.88M	(Dave Jones)
o	Remove duplicate pci_enable_device in ne2kpci	(Dave Jones)

2.4.1-ac4
o	Fix sk_in use counting in svcsock.c		(Neil Brown)
	| Not yet a complete and final agreed solution
o	Add support for KLSI USB ethernet 		(Brad Hards,
				 Stephane Alnet, 'the Zapman', and co)
o	Update aic7xxx driver				(Doug Ledford)
	| Please test this carefully and cc reports to Doug
o	Add help for CONFIG_INPUT			(Steven Cole)
o	3c523 driver update				(Tom Sightler)
o	Fix reiserfs Changes entry further		(Steven Cole)
o	Limit ide scatter gather to 128 blocks		(Jens Axboe)
o	Merge hppa config.in changes			(Matthew Wilcox)
o	Fix tx timeout recovery on via rhine		(Manfred Spraul)
o	Fix stale comments in fs/block_dev.c		(Tigran Aivazian)
o	Further defxx driver work			(Maciej Rozycki)
o	winbond 840 reported wrong setting value	(Maciej Rozycki)
o	Guillemot Maxi radio support		(Dimitromanolakis Apostolos)
o	Allow sleeping in pm callbacks but with locking	(me)
	working

2.4.1-ac3
o	Remove ancient dead net/Changes file		(Janice Girouard)
o	Merge Linus 2.4.2pre1
o	Resync xirc2ps with Dave Hinds tree		(dilinger)
o	Finish sorting out ramfs problems		(Mike Galbraith)
o	Update AWE32 documentation			(Andre Dahlqvist)
o	Remove reference to dead PPP documentation	(Andre Dahlqvist)
o	Make max_map tunable 				(Werner Almesberger)
o	Fix dead references to java support in some	(Andre Dahlqvist)
	arch/config
o	Make shmfs estimate size limits if none set	(Christoph Rohland)
o	Revert Crusoe hanging pci hanging changes
	| Im still chasing something weird in this
	| area that some of the pci changes I have fixes...
o	Merge HPPA hackers into CREDITS			(Mathew Wilcox)
o	Merge some of the HPPA updates			(Mathew Wilcox)
o	Add Reiserfs tools to changes			(Steven Cole)
o	Fix i2o Configure.help typo			(YOSHIMURA Keitaro)
o	SuperH HD64465 host bridge support		(Greg Banks)
o	Fix modversion.h includes			(Keith Owens)
o	Tlan driver probing updates			(Jeff Garzik)
o	Change media drivers to use new style module	(me)
	locking
	| Janitorial job - fix the last ones that
	| don't use module_*() and dump the init code

2.4.1-ac2
o	Fix matrox G450 framebuffer support		(Petr Vandrovec)
o	Fix description of DMA-mapping.txt		(Dave Miller)
o	Fix accidental revert of classifier bug		(Dave Miller)
o	Fix accidental revert of isdn change
o	Fix datagram hang on shutdown			(Alexey Kuznetsov)
o	Fix 64bit build of clntproc			(Michal Jaegermann)
	| wants a tidier solution yet
o	Fix ide toc caching bug introduced in 2.4.0	(Fredrik Vraalsen)
	| this should fix the DVD playback problems
o	Swapfs renaming and final bits			(Christoph Rohland)
o	Further APIC/NMI updates			(Mikael Pettersson)
o	Add further kernel doc contributions		(John Levon)
o	ACPI battery tweaks				(Pavel Machek)
o	Further ramfs fixes				(Ingo Oeser)
o	ROMFS fixes					(Mike Galbraith)
o	CS4281 fixes					(Thomas Woller)
o	Shift to authors official fixes for acenic	(Jes Sorensen)
o	Update the usb host<->host network drivers	(David Brownell)
	| Experimental but he wanted feedback so if you
	| have one beat it up a bit

2.4.1-ac1
o	Resync with Linus 2.4.1
o	Fix recursive make_request crash		(Ingo Molnar)
o	Updated VIA IDE driver				(Vojtech Pavlik)
	| Please exercise due care and caution testing this
	| bit...
o	Fix case where threaded apps might write to 	(Ben LaHaise)
	freed kernel memory
o	Fix ACPI oopses on tecra (apparently bios bugs)	(Pavel Machek)
o	AHA152x fixes from maintainer			(Juergen Fischer)
o	Fix case where scsi could hang on boot waiting	(Rogier Wolff)
	for a disk spinup
o	Further maestro3 pm work			(Zach Brown)
o	Further NTFS fixes				(Yuri Per)
o	Add GNU make to the list of URLs in Changes	(Steven Cole)
o	Make dmx3191d enable device before touching it	(Rasmus Andersen)
o	Make the sbpcd driver actually useful in 2.4	(Paul Gortmaker)
o	Make buslogic enable device before touching it	(Rasmus Andersen)
o	Fix tty module locking mishandling		(Maciej Rozycki)
o	Workaround code for APIC problems with ne2k	(Maciej Rozycki)
	| this will break original 82489DX devices for now
	| ie _very_ early dual pentium boards
o	Fix iptos netfilter bug				(Rusty Russell)
o	Fix get/set_fpu_mxcsr to check xmm ont fxsr	(Doug Ledford)
o	Fix name_to_kdev_t symbol			(Adam J Richter)
o	Update magic sysrq docs				(Jeremy Dolan)
o	Support for ETinc PCIsync boards		(Francois Romieu)
o	Mass duplicated word spelling fixes 		(Dave Jones)
o	Update sb driver to use spinlocks		(Chris Rankin)
o	Fix leak in bmac driver				(Hans Grobler)
o	Fix kmalloc check in atm/common			(Hans Grobler)
o	Fix buffer leak in defxx			(Hans Grobler)
o	Fix kmalloc check in netrom driver		(Hans Grobler)
	|BTW side exercise - how about using vmalloc here ?
o	Ditto for rose					(Hans Grobler)
	|Ditto for comment ;)
o	Fix lockd 64bit handling			(H J Lu)
o	Tidy pci_match_device ifdefs			(Rasmus Andersen)
o	Fix qla1280 handling of registration failure	(Rasmus Andersen
							 Rakesh Rakesh)
o	Config include fixes				(Niels Jensen)
o	MatroxFB updates				(Petr Vandrovec)
o	Tidy fat_read_super to use get_hardsect_size	(Tigran Aivazian)
o	Fix m68k bitops	ffs()				(Geert Uytterhoeven)
o	Fix ip_nat_standalone ksyms stuff		(Rusty Russell)
o	Fix copy_from_user mishandling in ip_fw_compat	(Rusty Russell)
o	Fix romfs for 2.4ac maxbytes 			(Mike Galbraith)
o	filemap/aging updates				(Rik van Riel)
o	Enable device before reading irq in ne2k-pci	(Martin Diehl)
o	Remove surplus nr_ioapics definition		(Rasmus Andersen)
o	S/390 build fixes				(Florian Laroche)
o	Advansys driver fixes/portability		(Arnaldo Carvalho
							 de Melo)
o	Fix out of message handling error in i2o_block	(Jason Lai)
o	Fix bit granularity of 32 in ACPI driver	(Adam J Richter)
o	Fix unsafe casting for ARM on NFS root mount	(Russell King)
o	Fix mxcsr masking on pentium IV			(Doug Ledford)
o	Update u14/eata drivers to 6.03			(Dario Ballabio)
o	Fix signed/unsigned mess in sysctl handlers	(me)


---
Alan Cox <alan@lxorguk.ukuu.org.uk>
Red Hat Kernel Hacker
& Linux 2.2 Maintainer                        Brainbench MVP for TCP/IP
http://www.linux.org.uk/diary                 http://www.brainbench.com

Questions about Enterprise Storage with Linux

[Tom Sightler]

Hi All,

I'm seeking information in regards to a large Linux implementation we are
planning.  We have been evaluating many storage options and I've come up
with some questions that I have been unable to answer as far as Linux
capabilities in regards to storage.

We are looking at storage systems that provide approximately 1TB of capacity
for now and can scale to 10+TB in the future.  We will almost certainly use
a storage system that provides both fiber channel connectivity as well as
NFS connectivity.

The questions that have been asked are as follows (assume 2.4.x kernels):

1.  What is the largest block device that linux currently supports?  i.e.
Can I create a single 1TB volume on my storage device and expect linux to
see it and be able to format it?

2.  Does linux have any problems with large (500GB+) NFS exports, how about
large files over NFS?

3.  What filesystem would be best for such large volumes?  We currently use
reirserfs on our internal system, but they generally have filesystems in the
18-30GB ranges and we're talking about potentially 10-20x that.  Should we
look at JFS/XFS or others?

4.  We're seriously considering using LVM for volume management.  Does it
have size limits per volume or other limitations that we should be aware of?

I'm sure these answers are out there, but I haven't been able to find
definitive answers (it seems everyone has a different answer to each
question).  Any assistance in pointing me to the correct information would
be greatly appreciated.

Thanks,
Tom

Re: Linux 2.4.2ac14

[Greg KH]

[-- Attachment #1: Type: text/plain, Size: 698 bytes --]

On Wed, Mar 07, 2001 at 11:13:37PM +0000, Alan Cox wrote:
> o	Fix the non build problem with do_BUG		(Andrew Morton)

gcc -D__KERNEL__ -I/home/greg/linux/linux-2.4.2-ac14/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -march=i686  -mno-terminator-canary    -DEXPORT_SYMTAB -c i386_ksyms.c
i386_ksyms.c:170: `do_BUG' undeclared here (not in a function)
i386_ksyms.c:170: initializer element for `__ksymtab_do_BUG.value' is not constant
make[1]: *** [i386_ksyms.o] Error 1
make[1]: Leaving directory
`/home/greg/linux/linux-2.4.2-ac14/arch/i386/kernel'
make: *** [_dir_arch/i386/kernel] Error 2

.config attached

thanks,

greg k-h

-- 
greg@(kroah|wirex).com


[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 18061 bytes --]

#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
# CONFIG_SBUS is not set
CONFIG_UID16=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_TOSHIBA is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set

#
# General setup
#
CONFIG_NET=y
# CONFIG_VISWS is not set
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_PM=y
# CONFIG_ACPI is not set
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_BLK_DEV_LVM is not set

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD7409 is not set
# CONFIG_AMD7409_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_OSB4 is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_IVB=y
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y

#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_ELMC is not set
# CONFIG_ELMC_II is not set
CONFIG_VORTEX=y
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Input core support
#
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

#
# I2C support
#
# CONFIG_I2C is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set

#
# Joysticks
#
# CONFIG_JOYSTICK is not set
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#
# CONFIG_VIDEO_PROC_FS is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_VIDEO_PMS is not set
CONFIG_VIDEO_CPIA=m
# CONFIG_VIDEO_CPIA_PP is not set
CONFIG_VIDEO_CPIA_USB=m
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_BUZ is not set
# CONFIG_VIDEO_ZR36120 is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
# CONFIG_DEVFS_MOUNT is not set
CONFIG_DEVFS_DEBUG=y
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_VESA=y
CONFIG_FB_VGA16=y
# CONFIG_FB_HGA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
# CONFIG_FBCON_MFB is not set
# CONFIG_FBCON_CFB2 is not set
# CONFIG_FBCON_CFB4 is not set
CONFIG_FBCON_CFB8=y
# CONFIG_FBCON_CFB16 is not set
# CONFIG_FBCON_CFB24 is not set
# CONFIG_FBCON_CFB32 is not set
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
CONFIG_FBCON_VGA_PLANES=y
# CONFIG_FBCON_VGA is not set
# CONFIG_FBCON_HGA is not set
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Sound
#
CONFIG_SOUND=y
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
CONFIG_SOUND_ES1371=y
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set

#
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_UHCI=m
CONFIG_USB_UHCI_ALT=m
CONFIG_USB_OHCI=m
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_HID=m
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_WACOM=m
CONFIG_USB_DC2XX=m
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HP5300=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_OV511=m
CONFIG_USB_DSBR=m
CONFIG_USB_DABUSB=m
CONFIG_USB_PLUSB=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_KAWETH=m
CONFIG_USB_USBNET=m
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_DEBUG=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_RIO500=m

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_BUGVERBOSE is not set

[PATCH] Re: Linux 2.4.2ac14

[Tachino Nobuhiro]

Hello,

2.4.2ac14 compilation fails when CONFIG_DEBUG_BUGVERBOSE is not enabled.
Here is my small patch.


diff -r -u linux-2.4.2-ac14.org/include/asm-i386/page.h linux-2.4.2-ac14/include/asm-i386/page.h
--- linux-2.4.2-ac14.org/include/asm-i386/page.h	Thu Mar  8 09:31:45 2001
+++ linux-2.4.2-ac14/include/asm-i386/page.h	Thu Mar  8 09:21:43 2001
@@ -87,8 +87,8 @@
  * see^H^H^Hhear bugs in early bootup as well!
  */
 
-#ifdef CONFIG_DEBUG_BUGVERBOSE
 extern void do_BUG(const char *file, int line);
+#ifdef CONFIG_DEBUG_BUGVERBOSE
 #define BUG() do {					\
 	do_BUG(__FILE__, __LINE__);			\
 	__asm__ __volatile__(".byte 0x0f,0x0b");	\

Re: Linux 2.4.2ac14

[Greg KH]

On Wed, Mar 07, 2001 at 04:40:52PM -0800, Greg KH wrote:
> On Wed, Mar 07, 2001 at 11:13:37PM +0000, Alan Cox wrote:
> > o	Fix the non build problem with do_BUG		(Andrew Morton)
> 
> gcc -D__KERNEL__ -I/home/greg/linux/linux-2.4.2-ac14/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -march=i686  -mno-terminator-canary    -DEXPORT_SYMTAB -c i386_ksyms.c
> i386_ksyms.c:170: `do_BUG' undeclared here (not in a function)
> i386_ksyms.c:170: initializer element for `__ksymtab_do_BUG.value' is not constant
> make[1]: *** [i386_ksyms.o] Error 1
> make[1]: Leaving directory
> `/home/greg/linux/linux-2.4.2-ac14/arch/i386/kernel'
> make: *** [_dir_arch/i386/kernel] Error 2
> 
> .config attached

Enabling CONFIG_DEBUG_BUGVERBOSE allows the build to work.

greg k-h

-- 
greg@(kroah|wirex).com
http://immunix.org/~greg

Re: Questions about Enterprise Storage with Linux

[Marcelo Tosatti]

On Wed, 7 Mar 2001, Jesse Pollard wrote:

> On Wed, 07 Mar 2001, Tom Sightler wrote:
> >Hi All,
> >
> >I'm seeking information in regards to a large Linux implementation we are
> >planning.  We have been evaluating many storage options and I've come up
> >with some questions that I have been unable to answer as far as Linux
> >capabilities in regards to storage.
> >
> >We are looking at storage systems that provide approximately 1TB of capacity
> >for now and can scale to 10+TB in the future.  We will almost certainly use
> >a storage system that provides both fiber channel connectivity as well as
> >NFS connectivity.
> >
> >The questions that have been asked are as follows (assume 2.4.x kernels):
> >
> >1.  What is the largest block device that linux currently supports?  i.e.
> >Can I create a single 1TB volume on my storage device and expect linux to
> >see it and be able to format it?
> 
> Checkout the GFS project for really large filesystems with a high capability
> of "fail safe" configuration.
> 
> The block/file limits are more determined by the size of the hosts. Alpha/Sparc
> based systems use 64 bit operations, Intel/AMD use 32 bit. It also depends
> on usage of the sign bit in the drivers. Most 32bit systems are limited
> to 1 TB (depending on the driver of course - some allow for 2 TB).

Even on 64-bit architectures the hard upper limit is 2TB. (32-bit block
numbers)

Misspelled spinlock_prefetch for MK7 (was: Linux 2.4.2ac14)

[junio]

You need this to compile for Athron/Durons.

--- 2.4.2-ac14/include/asm-i386/processor.h	Wed Mar  7 16:59:48 2001
+++ 2.4.2-ac14/include/asm-i386/processor.h	Wed Mar  7 17:25:17 2001
@@ -499,7 +499,7 @@
 {
 	 __asm__ __volatile__ ("prefetch (%0)" : : "r"(x));
 }
-#define spinock_prefetch(x)	prefetchw(x)
+#define spinlock_prefetch(x)	prefetchw(x)
 
 #endif
 

Re: Misspelled spinlock_prefetch for MK7 (was: Linux 2.4.2ac14)

[junio]

Sorry, I have wasted your time by speaking too early.

Here is a corrected version of my fix; the old one replaced one
typo with another X-<.

You need this to link for Athron/Durons.

--- 2.4.2-ac14/include/asm-i386/processor.h	Wed Mar  7 16:59:48 2001
+++ 2.4.2-ac14/include/asm-i386/processor.h	Wed Mar  7 17:25:17 2001
@@ -499,7 +499,7 @@
 {
 	 __asm__ __volatile__ ("prefetch (%0)" : : "r"(x));
 }
-#define spinock_prefetch(x)	prefetchw(x)
+#define spin_lock_prefetch(x)	prefetchw(x)

 #endif

Re: Questions about Enterprise Storage with Linux

[Jesse Pollard]

On Wed, 07 Mar 2001, Tom Sightler wrote:
>Hi All,
>
>I'm seeking information in regards to a large Linux implementation we are
>planning.  We have been evaluating many storage options and I've come up
>with some questions that I have been unable to answer as far as Linux
>capabilities in regards to storage.
>
>We are looking at storage systems that provide approximately 1TB of capacity
>for now and can scale to 10+TB in the future.  We will almost certainly use
>a storage system that provides both fiber channel connectivity as well as
>NFS connectivity.
>
>The questions that have been asked are as follows (assume 2.4.x kernels):
>
>1.  What is the largest block device that linux currently supports?  i.e.
>Can I create a single 1TB volume on my storage device and expect linux to
>see it and be able to format it?

Checkout the GFS project for really large filesystems with a high capability
of "fail safe" configuration.

The block/file limits are more determined by the size of the hosts. Alpha/Sparc
based systems use 64 bit operations, Intel/AMD use 32 bit. It also depends
on usage of the sign bit in the drivers. Most 32bit systems are limited
to 1 TB (depending on the driver of course - some allow for 2 TB).

>2.  Does linux have any problems with large (500GB+) NFS exports, how about
>large files over NFS?

I can't really say - you might clarify by what you count as large ( just > 2G
should be fine for any current kernel), not sure if "large" means 25-100GB.

>3.  What filesystem would be best for such large volumes?  We currently use
>reirserfs on our internal system, but they generally have filesystems in the
>18-30GB ranges and we're talking about potentially 10-20x that.  Should we
>look at JFS/XFS or others?

The GFS project already has tested 2TB in fiber channel array(s) with full
multi-host connectivity (shared filesystems rather than NFS). See:

http://www.sistina.com/gfs/

for details. It is not currently included in Linux distribution. The
current GFS version is 4.0 and works in kernel 2.2.18 and higher.

The big advantage with GFS is that redundant servers can be available
by having two or more NFS servers attached to the same GFS filesystem.

>4.  We're seriously considering using LVM for volume management.  Does it
>have size limits per volume or other limitations that we should be aware of?

GFS may serve better. It is a full shared filesystem with RAID target disks
(these are smart controllers) and incudes journaling.

>I'm sure these answers are out there, but I haven't been able to find
>definitive answers (it seems everyone has a different answer to each
>question).  Any assistance in pointing me to the correct information would
>be greatly appreciated.

I haven't had direct expierence with GFS, but it looks very impressive in
the documentation.

-- 
-------------------------------------------------------------------------
Jesse I Pollard, II
Email: jesse@cats-chateau.net

Any opinions expressed are solely my own.

Re: Questions about Enterprise Storage with Linux

[Tom Sightler]

> >1.  What is the largest block device that linux currently supports?  i.e.
> >Can I create a single 1TB volume on my storage device and expect linux to
> >see it and be able to format it?
>
> Checkout the GFS project for really large filesystems with a high
capability
> of "fail safe" configuration.
>
> The block/file limits are more determined by the size of the hosts.
Alpha/Sparc
> based systems use 64 bit operations, Intel/AMD use 32 bit. It also depends
> on usage of the sign bit in the drivers. Most 32bit systems are limited
> to 1 TB (depending on the driver of course - some allow for 2 TB).

Yes, I should have clarified, we will be using the Intel platform.

A large portion of the fiber channel storage (as much as 300GB in year one)
will be dedicated to an Oracle 8i database, I'm not sure if GFS is truly
suited for this server, although we have considered using LVM (perhaps even
RAWIO on LVM although I see reports of problems with that) to ease some
storage management issues (we've been testing LVM with reiserfs and are very
impressed with the ease of adding space and growing the filesystem live).

> >2.  Does linux have any problems with large (500GB+) NFS exports, how
about
> >large files over NFS?
>
> I can't really say - you might clarify by what you count as large ( just >
2G
> should be fine for any current kernel), not sure if "large" means
25-100GB.

For example if we purchase a NetApp Filer, or EMC Celerra with 1TB of
storage, and elect to export that entire amount as a single NFS mount, and
then use that storage to allow several Linux boxes to share 100GB
(admittedly temporary) files, will Linux handle that, at least in theory?
Basically, I don't know what the file size limits are on NFS (on any system,
not neccesarily just Linux) and was hoping someone could tell me.

And actually, we have looked at GFS as an alternative for this function,
biggest disadvantage is cost of connecting 7 machines via fiber channel (we
already have GigE from the network connectivity), but it does look like an
excellent option which we may very well go with.

And some of these sizes I'm asking about are just seeking the limits, I'll
personally be amazed if we actually approach within half of these sizes any
time soon, but then again, data always manages to grow to fill whatever
storage you have available so I guess you never know, right?

> >3.  What filesystem would be best for such large volumes?  We currently
use
> >reirserfs on our internal system, but they generally have filesystems in
the
> >18-30GB ranges and we're talking about potentially 10-20x that.  Should
we
> >look at JFS/XFS or others?
>
> The GFS project already has tested 2TB in fiber channel array(s) with full
> multi-host connectivity (shared filesystems rather than NFS).
>
> The big advantage with GFS is that redundant servers can be available
> by having two or more NFS servers attached to the same GFS filesystem.

Yep, as I mentioned above, we may very well use GFS here.  It certainly has
some advantages that we really like, but we need to justify the additional
host of HBA's and another fiber channel switch (saying it won't work over
NFS would be enough to justify it).  We also had some concerns of stability
with GFS, not that we know of any issues, but we don't really have an easy
way test it in our current environment, and we haven't ordered the new
equipment yet.

> >4.  We're seriously considering using LVM for volume management.  Does it
> >have size limits per volume or other limitations that we should be aware
of?
>
> GFS may serve better. It is a full shared filesystem with RAID target
disks
> (these are smart controllers) and incudes journaling.

The LVM issue was largely for the managent of the volumes dedicated to the
Oracle database (basically a replacement for Veritas Volume Manager that
Oracle on Solaris folks seem to love).  Once again, we don't think GFS is
really suited for Oracle (other opinions accepted).  I was interrupted a few
too many times when composing the first email, I should have been more
detailed about exactly what we were doing, what we've looked at, etc.

Thanks,
Tom

Re: Questions about Enterprise Storage with Linux

[Jauder Ho]

On Wed, 7 Mar 2001, Tom Sightler wrote:

> The questions that have been asked are as follows (assume 2.4.x kernels):
>
> 1.  What is the largest block device that linux currently supports?  i.e.
> Can I create a single 1TB volume on my storage device and expect linux to
> see it and be able to format it?

http://www.suse.de/~aj/linux_lfs.html should clear up

> 2.  Does linux have any problems with large (500GB+) NFS exports, how about
> large files over NFS?

See above

> 3.  What filesystem would be best for such large volumes?  We currently use
> reirserfs on our internal system, but they generally have filesystems in the
> 18-30GB ranges and we're talking about potentially 10-20x that.  Should we
> look at JFS/XFS or others?

I am not sure what you intend this application for. If it is mission
critical in any way shape or form, I would still recommend using something
like Veritas (which unfortunately is not ported to Linux yet). I have
heard good things about XFS although I have not had the chance to use it
yet.

> 4.  We're seriously considering using LVM for volume management.  Does it
> have size limits per volume or other limitations that we should be aware of?
>
> I'm sure these answers are out there, but I haven't been able to find
> definitive answers (it seems everyone has a different answer to each
> question).  Any assistance in pointing me to the correct information would
> be greatly appreciated.

Have fun and do post your findings back to l-k. I would be interested in
hearing what you end up with.

--Jauder

Re: Linux 2.4.2ac14

[Keitaro Yosimura]

Hi. alan.

>2.4.2-ac14

at patching.
>The next patch would create the file `include/linux/hdlc.h',
>which already exists!  Assume -R? [n] n
>Apply anyway? [n] y
>patching file `include/linux/hdlc.h'
>Patch attempted to create file `include/linux/hdlc.h', which already exists.
>Hunk #1 FAILED at 1.
>1 out of 1 hunk FAILED -- saving rejects to include/linux/hdlc.h.rej

must remove before patching? or ignore it?

<|> YOSHIMURA 'ramsy' Keitaro / Japan Linux Association
<|> mailto:ramsy@linux.or.jp
<|> http://jla.linux.or.jp/index.html

Re: Questions about Enterprise Storage with Linux

[Tim Moore]

Tom Sightler wrote:
> ...
> For example if we purchase a NetApp Filer, or EMC Celerra with 1TB of
> storage, and elect to export that entire amount as a single NFS mount, and
> then use that storage to allow several Linux boxes to share 100GB
> (admittedly temporary) files, will Linux handle that, at least in theory?

Linux/NFS works very well with Filers.  I did a lot of throughput
testing at Netapp circa 2.2.10-12 with Gigabit Ethernet (AceNIC).  Why
would you need to put 1TB on a single mount point?

Filers are also blessed by Oracle and can take care of the volume
management and backup issues.  The principle advantage is avalibility
(balanced against cost of course).  If you do talk to Netapp, ask for
someone that has linux/Filer experience.

rgds,
tim.

--

Re: Questions about Enterprise Storage with Linux

[james rich]

On Wed, 7 Mar 2001, Tom Sightler wrote:

> 2.  Does linux have any problems with large (500GB+) NFS exports, how about
> large files over NFS?
> 
> 3.  What filesystem would be best for such large volumes?  We currently use
> reirserfs on our internal system, but they generally have filesystems in the
> 18-30GB ranges and we're talking about potentially 10-20x that.  Should we
> look at JFS/XFS or others?

I think that for filesystems this size you definately want to look at XFS
of JFS.  Maybe you will decide not to use them - but you should test them.

I am currently using XFS and it really works.  It currently has some
issues when used with raid 1, but it is probably the most suited for what
you want.  Exporting an XFS volume over NFS is no problem.  You can also
use xfs_growfs to change the size of your XFS partition.  I haven't had
any instability during all the time I've used XFS.

James Rich
james.rich@m.cc.utah.edu

Re: Linux 2.4.2ac14

[Doug Ledford]

Alan Cox wrote:
> 2.4.2-ac14
> o       Updated i810_audio.c                            (Doug Ledford)

I wanted to let people know that there is a lot of new code in this particular
update that needs testing.  The nice thing is that quake3 should now play with
this sound driver so the testing can at least be a little bit of fun ;-) 
Basically, all the stuff that used to work still should, mmap audio should now
work, and you should not have to specify any ftsodell=1 options to the driver
any more and it shouldn't sound like Alvin and the Chipmunks when you don't. 
If anyone finds problems with this driver, please let me know.  I tested what
I could, but I'm sure there are things I possibly missed.  Oh, one more thing,
when playing mp3's via xmms and using the oss output module, the number of
interrupts the system has to service is down by about 100 per second or more,
so it should be slightly lighter on system CPU time as well.

-- 

 Doug Ledford <dledford@redhat.com>  http://people.redhat.com/dledford
      Please check my web site for aic7xxx updates/answers before
                      e-mailing me about problems

Re: Linux 2.4.2ac14

[Alan Cox]

> >The next patch would create the file `include/linux/hdlc.h',
> >which already exists!  Assume -R? [n] n
> >Apply anyway? [n] y
> >patching file `include/linux/hdlc.h'
> >Patch attempted to create file `include/linux/hdlc.h', which already exists.
> >Hunk #1 FAILED at 1.
> >1 out of 1 hunk FAILED -- saving rejects to include/linux/hdlc.h.rej
> 
> must remove before patching? or ignore it?

That looks like you applied ac14 over ac13 or to 2.4.3pre not to 2.4.2

Re: Linux 2.4.2ac14

[andersg]

On Wed, Mar 07, 2001 at 04:40:52PM -0800, Greg KH wrote:

> > o	Fix the non build problem with do_BUG		(Andrew Morton)

> i386_ksyms.c:170: `do_BUG' undeclared here (not in a function)

> # CONFIG_DEBUG_BUGVERBOSE is not set

this patch makes it _compile_ both with and without BUGVERBOSE.

-- 

//anders/g

--- arch/i386/kernel/i386_ksyms.c.orig  Thu Mar  8 21:30:27 2001
+++ arch/i386/kernel/i386_ksyms.c       Thu Mar  8 21:30:31 2001
@@ -167,5 +167,7 @@
 EXPORT_SYMBOL(empty_zero_page);
 #endif

+#ifdef CONFIG_DEBUG_BUGVERBOSE
 EXPORT_SYMBOL(do_BUG);
+#endif
   
   

Re: Questions about Enterprise Storage with Linux

[Thomas Davis]

Tom Sightler wrote:
> 
> Hi All,
> 
> I'm seeking information in regards to a large Linux implementation we are
> planning.  We have been evaluating many storage options and I've come up
> with some questions that I have been unable to answer as far as Linux
> capabilities in regards to storage.
> 
> We are looking at storage systems that provide approximately 1TB of capacity
> for now and can scale to 10+TB in the future.  We will almost certainly use
> a storage system that provides both fiber channel connectivity as well as
> NFS connectivity.
> 
> The questions that have been asked are as follows (assume 2.4.x kernels):
> 
> 1.  What is the largest block device that linux currently supports?  i.e.
> Can I create a single 1TB volume on my storage device and expect linux to
> see it and be able to format it?
> 

Yes.

[root@pdsfdv10 data]# df .
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/rza3            1046274600 889731608 146074448  86% /export/data

> 2.  Does linux have any problems with large (500GB+) NFS exports, how about
> large files over NFS?
> 

No.
[root@pdsflx002 pdsfdv10]# df .
Filesystem           1k-blocks      Used Available Use% Mounted on
pdsfdv10.nersc.gov:/export/data
                     1046274600 889731608 146074448  86% /auto/pdsfdv10

(same filesystem, via NFS)

files > 2gb need LFS support in ia32 environments.

> 3.  What filesystem would be best for such large volumes?  We currently use
> reirserfs on our internal system, but they generally have filesystems in the
> 18-30GB ranges and we're talking about potentially 10-20x that.  Should we
> look at JFS/XFS or others?
> 

ext2 works fine, you just have to wait about 3 hrs to FSCK a crashed
filesystem; ext3 also works fine.  Get a 2.2.18, apply the ext3 fs
patches, bang, your done.

reiserfs won't work via NFS, without kernel patches.

-- 
------------------------+--------------------------------------------------
Thomas Davis		| ASG Cluster guy
tadavis@lbl.gov		| 
(510) 486-4524		| "80 nodes and chugging Captain!"