* 2.4.5 keyspan driver @ 2001-06-30 5:33 Gregory T. Norris 2001-06-30 18:37 ` Gregory T. Norris 2001-07-03 17:38 ` 2.4.5 keyspan driver Greg KH 0 siblings, 2 replies; 17+ messages in thread From: Gregory T. Norris @ 2001-06-30 5:33 UTC (permalink / raw) To: linux-kernel, linux-usb-users [-- Attachment #1: Type: text/plain, Size: 469 bytes --] I'm trying to use a Keyspan USA-19 to enable access to a Palm m500 on a serial cradle. Whenever I try to modprobe the keyspan module I get the message "Warning: /lib/modules/2.4.5/kernel/drivers/usb/serial/usbserial.o symbol for parameter vendor not found"... the module loads anyway, but doesn't seem to detect the device. As far as I can see, everything seems to be setup correctly (.config attached). Pointers and suggestions would be greatly appreciated. Thanx! [-- Attachment #2: .config --] [-- Type: text/plain, Size: 16980 bytes --] # # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_TOSHIBA is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=m CONFIG_X86_CPUID=m CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set CONFIG_X86_UP_IOAPIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y # # General setup # CONFIG_NET=y # CONFIG_VISWS is not set CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PM is not set # CONFIG_ACPI is not set # CONFIG_APM is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set # CONFIG_PARPORT_SUNBPP is not set # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Crypto options # CONFIG_CRYPTO=m CONFIG_CIPHERS=m CONFIG_CIPHER_AES=m # CONFIG_CIPHER_RIJNDAEL is not set CONFIG_CIPHER_TWOFISH=m # CONFIG_CIPHER_MARS is not set # CONFIG_CIPHER_RC6 is not set CONFIG_CIPHER_SERPENT=m # CONFIG_CIPHER_DFC is not set CONFIG_CIPHER_BLOWFISH=m # CONFIG_CIPHER_IDEA is not set # CONFIG_CIPHER_RC5 is not set CONFIG_CIPHER_DES_EDE3=m # CONFIG_CIPHER_DES is not set CONFIG_DIGEST=m # CONFIG_DIGEST_MD5 is not set CONFIG_DIGEST_SHA1=m # # Plug and Play configuration # # CONFIG_PNP is not set # CONFIG_ISAPNP is not set # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_LOOP_DEP=m CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_LOOP_GEN=y # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_BLK_DEV_LVM is not set # # Networking options # CONFIG_PACKET=m CONFIG_PACKET_MMAP=y # CONFIG_NETLINK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_INET_ECN=y # CONFIG_SYN_COOKIES is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_TCPMSS=m CONFIG_IP_NF_MATCH_UNCLEAN=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_MIRROR=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_COMPAT_IPCHAINS=m CONFIG_IP_NF_NAT_NEEDED=y # CONFIG_IP_NF_COMPAT_IPFWADM is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # # ATA/IDE/MFM/RLL support # # CONFIG_IDE is not set # CONFIG_BLK_DEV_IDE_MODES is not set # CONFIG_BLK_DEV_HD is not set # # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_DEBUG_QUEUES is not set # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=24 CONFIG_AIC7XXX_RESET_DELAY_MS=5000 # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_DEBUG is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set # CONFIG_ELMC is not set # CONFIG_ELMC_II is not set CONFIG_VORTEX=m # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # CONFIG_INPUT=y # CONFIG_INPUT_KEYBDEV is not set CONFIG_INPUT_MOUSEDEV=m CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=m # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=m # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y # CONFIG_PPDEV is not set # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=m CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # # Joysticks # CONFIG_JOYSTICK=y CONFIG_INPUT_NS558=m # CONFIG_INPUT_LIGHTNING is not set # CONFIG_INPUT_PCIGAME is not set # CONFIG_INPUT_CS461X is not set # CONFIG_INPUT_ANALOG is not set # CONFIG_INPUT_A3D is not set # CONFIG_INPUT_ADI is not set # CONFIG_INPUT_COBRA is not set # CONFIG_INPUT_GF2K is not set # CONFIG_INPUT_GRIP is not set # CONFIG_INPUT_INTERACT is not set # CONFIG_INPUT_TMDC is not set CONFIG_INPUT_SIDEWINDER=m # CONFIG_INPUT_SERPORT is not set # CONFIG_INPUT_WARRIOR is not set # CONFIG_INPUT_MAGELLAN is not set # CONFIG_INPUT_SPACEORB is not set # CONFIG_INPUT_SPACEBALL is not set # CONFIG_INPUT_STINGER is not set # CONFIG_INPUT_IFORCE_232 is not set # CONFIG_INPUT_IFORCE_USB is not set # CONFIG_INPUT_DB9 is not set # CONFIG_INPUT_GAMECON is not set # CONFIG_INPUT_TURBOGRAFX is not set # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_INTEL_RNG is not set CONFIG_NVRAM=m CONFIG_RTC=m # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=m # CONFIG_AGP_INTEL is not set # CONFIG_AGP_I810 is not set CONFIG_AGP_VIA=y CONFIG_AGP_AMD=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_ALI is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set CONFIG_DRM_MGA=m # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=m # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y # CONFIG_RAMFS is not set CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y # CONFIG_DEVFS_DEBUG is not set # CONFIG_DEVPTS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_SYSV_FS_WRITE is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_NFS_FS is not set # CONFIG_NFS_V3 is not set # CONFIG_ROOT_NFS is not set # CONFIG_NFSD is not set # CONFIG_NFSD_V3 is not set # CONFIG_SUNRPC is not set # CONFIG_LOCKD is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # # CONFIG_FB is not set # # Sound # CONFIG_SOUND=m # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set # CONFIG_SOUND_TVMIXER is not set # # USB support # CONFIG_USB=m # CONFIG_USB_DEBUG is not set CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set CONFIG_USB_UHCI=m CONFIG_USB_UHCI_ALT=m # CONFIG_USB_OHCI is not set # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH is not set # CONFIG_USB_STORAGE is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_HID is not set # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_WACOM is not set CONFIG_USB_DC2XX=m # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_DABUSB is not set # CONFIG_USB_PLUSB is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_NET1080 is not set # CONFIG_USB_USS720 is not set # # USB Serial Converter support # CONFIG_USB_SERIAL=m # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set CONFIG_USB_SERIAL_KEYSPAN=m # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set CONFIG_USB_SERIAL_KEYSPAN_USA19=y # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_OMNINET is not set CONFIG_USB_RIO500=m # # Kernel hacking # CONFIG_MAGIC_SYSRQ=y ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.4.5 keyspan driver 2001-06-30 5:33 2.4.5 keyspan driver Gregory T. Norris @ 2001-06-30 18:37 ` Gregory T. Norris 2001-07-01 20:49 ` usbserial/keyspan module load race [was: 2.4.5 keyspan driver] Gregory T. Norris 2001-07-03 17:38 ` 2.4.5 keyspan driver Greg KH 1 sibling, 1 reply; 17+ messages in thread From: Gregory T. Norris @ 2001-06-30 18:37 UTC (permalink / raw) To: linux-kernel, linux-usb-users It seems to be working now, although I'm not really sure what fixed it... my kernel configuration is essentially unchanged. I'm suspicious that the adapter might have a bad connection, or something similar. Cheers! On Sat, Jun 30, 2001 at 12:33:23AM -0500, Gregory T. Norris wrote: > I'm trying to use a Keyspan USA-19 to enable access to a Palm m500 on a > serial cradle. Whenever I try to modprobe the keyspan module I get the > message "Warning: /lib/modules/2.4.5/kernel/drivers/usb/serial/usbserial.o > symbol for parameter vendor not found"... the module loads anyway, but > doesn't seem to detect the device. > > As far as I can see, everything seems to be setup correctly (.config > attached). Pointers and suggestions would be greatly appreciated. > Thanx! ^ permalink raw reply [flat|nested] 17+ messages in thread
* usbserial/keyspan module load race [was: 2.4.5 keyspan driver] 2001-06-30 18:37 ` Gregory T. Norris @ 2001-07-01 20:49 ` Gregory T. Norris 2001-07-02 2:51 ` Greg KH ` (3 more replies) 0 siblings, 4 replies; 17+ messages in thread From: Gregory T. Norris @ 2001-07-01 20:49 UTC (permalink / raw) To: linux-kernel, linux-usb-users Ok, I've figured out how to reproduce the problem. Initially, usbcore and usb-uhci are the only USB drivers loaded. If I load usbserial and keyspan seperately ("modprobe usbserial ; sleep 5 ; modprobe keyspan") everything works correctly. The problem occurs when I let modprobe pull in usbserial behind the scenes as a dependency. The keyspan driver (usually) doesn't detect the device, and /proc/modules forever lists it as "initializing". The module won't unload at this point, so the driver's unusable until the next reboot. Unfortunately I have no idea how/where to fix this. Anyone want to take a stab at it? On Sat, Jun 30, 2001 at 01:37:52PM -0500, Gregory T. Norris wrote: > It seems to be working now, although I'm not really sure what fixed > it... my kernel configuration is essentially unchanged. I'm suspicious > that the adapter might have a bad connection, or something similar. > > Cheers! > > On Sat, Jun 30, 2001 at 12:33:23AM -0500, Gregory T. Norris wrote: > > I'm trying to use a Keyspan USA-19 to enable access to a Palm m500 on a > > serial cradle. Whenever I try to modprobe the keyspan module I get the > > message "Warning: /lib/modules/2.4.5/kernel/drivers/usb/serial/usbserial.o > > symbol for parameter vendor not found"... the module loads anyway, but > > doesn't seem to detect the device. > > > > As far as I can see, everything seems to be setup correctly (.config > > attached). Pointers and suggestions would be greatly appreciated. > > Thanx! ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: usbserial/keyspan module load race [was: 2.4.5 keyspan driver] 2001-07-01 20:49 ` usbserial/keyspan module load race [was: 2.4.5 keyspan driver] Gregory T. Norris @ 2001-07-02 2:51 ` Greg KH 2001-07-02 22:26 ` Gregory T. Norris [not found] ` <01070200025204.05063@idun> ` (2 subsequent siblings) 3 siblings, 1 reply; 17+ messages in thread From: Greg KH @ 2001-07-02 2:51 UTC (permalink / raw) To: linux-kernel, linux-usb-users On Sun, Jul 01, 2001 at 03:49:10PM -0500, Gregory T. Norris wrote: > Ok, I've figured out how to reproduce the problem. > > Initially, usbcore and usb-uhci are the only USB drivers loaded. If I > load usbserial and keyspan seperately ("modprobe usbserial ; sleep 5 ; > modprobe keyspan") everything works correctly. The problem occurs when > I let modprobe pull in usbserial behind the scenes as a dependency. The > keyspan driver (usually) doesn't detect the device, and /proc/modules > forever lists it as "initializing". The module won't unload at this > point, so the driver's unusable until the next reboot. > > Unfortunately I have no idea how/where to fix this. Anyone want to > take a stab at it? Which keyspan driver are you doing this with, keyspan_pda.o or keyspan.o? Have you tried having the linux-hotplug scripts install the driver for you when you plug the device in? <http://linux-hotplug.sourceforge.net/> thanks, greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: usbserial/keyspan module load race [was: 2.4.5 keyspan driver] 2001-07-02 2:51 ` Greg KH @ 2001-07-02 22:26 ` Gregory T. Norris 0 siblings, 0 replies; 17+ messages in thread From: Gregory T. Norris @ 2001-07-02 22:26 UTC (permalink / raw) To: linux-kernel, linux-usb-users > Which keyspan driver are you doing this with, keyspan_pda.o or > keyspan.o? keyspan.o > Have you tried having the linux-hotplug scripts install the driver for > you when you plug the device in? <http://linux-hotplug.sourceforge.net/> Not yet. It's on my to-do list, tho. (-: ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <01070200025204.05063@idun>]
* Re: usbserial/keyspan module load race [was: 2.4.5 keyspan driver] [not found] ` <01070200025204.05063@idun> @ 2001-07-02 22:22 ` Gregory T. Norris 2001-07-02 22:43 ` Greg KH 0 siblings, 1 reply; 17+ messages in thread From: Gregory T. Norris @ 2001-07-02 22:22 UTC (permalink / raw) To: Oliver Neukum; +Cc: linux-kernel It wasn't quite as cooperative today, but after a few attempts I was able to reproduce it. root@glitch[~]# modprobe keyspan Warning: /lib/modules/2.4.5/kernel/drivers/usb/serial/usbserial.o symbol for parameter vendor not found Segmentation fault root@glitch[~]# ps -ef|grep "[m]odprobe" root@glitch[~]# root@glitch[~]# egrep "usb|key" /proc/modules keyspan 22112 (initializing) usbserial 17296 0 [keyspan] usb-uhci 21200 0 (unused) usbcore 48688 1 [keyspan usbserial usb-uhci] I browsed the full ps output as well, but I didn't find anything looking like what you described. On Mon, Jul 02, 2001 at 12:02:52AM +0200, Oliver Neukum wrote: > When this happens does the modprobe task hang in __down with state D ? > ps can show you this information. > > Regards > Oliver ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: usbserial/keyspan module load race [was: 2.4.5 keyspan driver] 2001-07-02 22:22 ` Gregory T. Norris @ 2001-07-02 22:43 ` Greg KH 2001-07-02 23:33 ` Gregory T. Norris 0 siblings, 1 reply; 17+ messages in thread From: Greg KH @ 2001-07-02 22:43 UTC (permalink / raw) To: haphazard, linux-kernel On Mon, Jul 02, 2001 at 05:22:17PM -0500, Gregory T. Norris wrote: > It wasn't quite as cooperative today, but after a few attempts I was > able to reproduce it. > > root@glitch[~]# modprobe keyspan > Warning: /lib/modules/2.4.5/kernel/drivers/usb/serial/usbserial.o symbol for parameter vendor not found > Segmentation fault What version of the modutils package do you have? thanks, greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: usbserial/keyspan module load race [was: 2.4.5 keyspan driver] 2001-07-02 22:43 ` Greg KH @ 2001-07-02 23:33 ` Gregory T. Norris 0 siblings, 0 replies; 17+ messages in thread From: Gregory T. Norris @ 2001-07-02 23:33 UTC (permalink / raw) To: Greg KH; +Cc: linux-kernel adric@glitch[~]$ dpkg -l modutils | tail -n1 ii modutils 2.4.6-3 Linux module utilities. On Mon, Jul 02, 2001 at 03:43:25PM -0700, Greg KH wrote: > What version of the modutils package do you have? > > thanks, > > greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <01070123350102.05063@idun>]
* Re: usbserial/keyspan module load race [was: 2.4.5 keyspan driver] [not found] ` <01070123350102.05063@idun> @ 2001-07-02 22:23 ` Gregory T. Norris 0 siblings, 0 replies; 17+ messages in thread From: Gregory T. Norris @ 2001-07-02 22:23 UTC (permalink / raw) To: Oliver Neukum; +Cc: linux-usb-devel, linux-kernel I tried it both ways. It didn't seem to make any difference. On Sun, Jul 01, 2001 at 11:35:01PM +0200, Oliver Neukum wrote: > Most interresting. > > Did you compile with generic serial device support ? > Could you please reverse your configuration choice in this regard and try > reproduce it ? > > Regards > Oliver > > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: usbserial/keyspan module load race [was: 2.4.5 keyspan driver] 2001-07-01 20:49 ` usbserial/keyspan module load race [was: 2.4.5 keyspan driver] Gregory T. Norris ` (2 preceding siblings ...) [not found] ` <01070123350102.05063@idun> @ 2001-07-03 0:38 ` Gregory T. Norris 3 siblings, 0 replies; 17+ messages in thread From: Gregory T. Norris @ 2001-07-03 0:38 UTC (permalink / raw) To: linux-kernel, linux-usb-users Here's something interesting... Twice today while I was playing with usbserial/keyspan I got the following: root@glitch[~]# modprobe keyspan usbserial.c: ezusb_set_reset_Re254f24d- 1 failed keyspan.c: ezusb_writememory failed for Keyspanfirmware (-110 0000 e0b4518d 3) usbserial.c: ezusb_set_reset_Re254f24d- 0 failed Afterwards, not only did the keyspan driver still work, but it was *much* faster than before. I was able to perform a full sync with the Palm in about 15-20 seconds, while it was taking about two minutes before. Weird! ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.4.5 keyspan driver 2001-06-30 5:33 2.4.5 keyspan driver Gregory T. Norris 2001-06-30 18:37 ` Gregory T. Norris @ 2001-07-03 17:38 ` Greg KH 2001-07-03 22:19 ` Gregory T. Norris 1 sibling, 1 reply; 17+ messages in thread From: Greg KH @ 2001-07-03 17:38 UTC (permalink / raw) To: linux-kernel, linux-usb-users On Sat, Jun 30, 2001 at 12:33:23AM -0500, Gregory T. Norris wrote: > CONFIG_USB_SERIAL=m > # CONFIG_USB_SERIAL_GENERIC is not set Can you enable CONFIG_USB_SERIAL_GENERIC and let me know if that fixes the problem? thanks, greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.4.5 keyspan driver 2001-07-03 17:38 ` 2.4.5 keyspan driver Greg KH @ 2001-07-03 22:19 ` Gregory T. Norris 2001-07-03 22:49 ` Gregory T. Norris 0 siblings, 1 reply; 17+ messages in thread From: Gregory T. Norris @ 2001-07-03 22:19 UTC (permalink / raw) To: linux-kernel, linux-usb-users I'm pretty sure that I've hit this with CONFIG_USB_SERIAL_GENERIC set. I'll retry it, just to be sure. On Tue, Jul 03, 2001 at 10:38:00AM -0700, Greg KH wrote: > On Sat, Jun 30, 2001 at 12:33:23AM -0500, Gregory T. Norris wrote: > > CONFIG_USB_SERIAL=m > > # CONFIG_USB_SERIAL_GENERIC is not set > > Can you enable CONFIG_USB_SERIAL_GENERIC and let me know if that fixes > the problem? > > thanks, > > greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.4.5 keyspan driver 2001-07-03 22:19 ` Gregory T. Norris @ 2001-07-03 22:49 ` Gregory T. Norris 2001-07-04 0:16 ` Gregory T. Norris 0 siblings, 1 reply; 17+ messages in thread From: Gregory T. Norris @ 2001-07-03 22:49 UTC (permalink / raw) To: linux-kernel, linux-usb-users After adding CONFIG_USB_SERIAL_GENERIC I wasn't able to hang the module while initializing (I only made three tries, tho), but the driver didn't seem to work either. root@glitch[~]# modprobe keyspan debug=1 adric@glitch[~]$ coldsync -v -ms Please press the HotSync button. ACK Timeout. Attempting to resend. ACK Timeout. Attempting to resend. ACK Timeout. Attempting to resend. ACK Timeout. Attempting to resend. ACK Timeout. Attempting to resend. ACK Timeout. Attempting to resend. ACK Timeout. Attempting to resend. ACK Timeout. Attempting to resend. ACK Timeout. Attempting to resend. ACK Timeout. Attempting to resend. ACK Timeout. Attempting to resend. ACK Timeout. Attempting to resend. Error: Can't get system info. Error: Lost connection to Palm. root@glitch[~]# tail -n 28 /var/log/kern.log Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Generic Jul 3 17:32:18 glitch kernel: usb.c: registered new driver serial Jul 3 17:32:18 glitch kernel: usbserial.c: v1.0.0 Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux-usb/ Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial Driver Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA18X - (without firmware) Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA19 - (without firmware) Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA19W - (without firmware) Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA28 - (without firmware) Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA28X - (without firmware) Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA49W - (without firmware) Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA18X Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA19 Jul 3 17:32:18 glitch kernel: usbserial.c: Keyspan USA19 converter detected Jul 3 17:32:18 glitch kernel: usbserial.c: Keyspan USA19 converter now attached to ttyUSB0 (or usb/tts/0 for devfs) Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA19W Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA28 Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA28X Jul 3 17:32:18 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA49W Jul 3 17:32:18 glitch kernel: keyspan.c: v1.0.0 Hugh Blemings <hugh@linuxcare.com> Jul 3 17:32:18 glitch kernel: keyspan.c: Keyspan USB to Serial Converter Driver Jul 3 17:32:21 glitch kernel: keyspan.c: keyspan_usa19_calc_baud 9600 ff b2. Jul 3 17:32:21 glitch kernel: keyspan.c: keyspan_usa28_send_setup already writing Jul 3 17:32:21 glitch kernel: keyspan.c: keyspan_usa28_send_setup already writing Jul 3 17:32:21 glitch kernel: keyspan.c: usa28_outcont_callback sending setup Jul 3 17:32:21 glitch kernel: keyspan.c: keyspan_usa19_calc_baud 9600 ff b2. Jul 3 17:32:28 glitch kernel: keyspan.c: keyspan_usa19_calc_baud 9600 ff b2. Jul 3 17:32:48 glitch kernel: keyspan.c: usa28_indat_callbacknonzero status: fffffffe on endpoint Jul 3 17:32:48 glitch kernel: 1. On Tue, Jul 03, 2001 at 05:19:53PM -0500, Gregory T. Norris wrote: > I'm pretty sure that I've hit this with CONFIG_USB_SERIAL_GENERIC set. > I'll retry it, just to be sure. > > On Tue, Jul 03, 2001 at 10:38:00AM -0700, Greg KH wrote: > > On Sat, Jun 30, 2001 at 12:33:23AM -0500, Gregory T. Norris wrote: > > > CONFIG_USB_SERIAL=m > > > # CONFIG_USB_SERIAL_GENERIC is not set > > > > Can you enable CONFIG_USB_SERIAL_GENERIC and let me know if that fixes > > the problem? > > > > thanks, > > > > greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.4.5 keyspan driver 2001-07-03 22:49 ` Gregory T. Norris @ 2001-07-04 0:16 ` Gregory T. Norris 2001-07-04 7:32 ` Greg KH 0 siblings, 1 reply; 17+ messages in thread From: Gregory T. Norris @ 2001-07-04 0:16 UTC (permalink / raw) To: linux-kernel, linux-usb-users In the hopes that it might prove helpful, I reran coldsync after loading usbserial.o and keyspan.o with the "debug=1" option. Here's what was logged: ----- <SNIP> ----- Jul 3 19:10:45 glitch kernel: usbserial.c: USB Serial support registered for Generic Jul 3 19:10:45 glitch kernel: usb.c: registered new driver serial Jul 3 19:10:45 glitch kernel: usbserial.c: none matched Jul 3 19:10:45 glitch kernel: usbserial.c: v1.0.0 Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux-usb/ Jul 3 19:10:45 glitch kernel: usbserial.c: USB Serial Driver Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA18X - (without firmware) Jul 3 19:10:51 glitch kernel: usbserial.c: none matched Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA19 - (without firmware) Jul 3 19:10:51 glitch kernel: usbserial.c: none matched Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA19W - (without firmware) Jul 3 19:10:51 glitch kernel: usbserial.c: none matched Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA28 - (without firmware) Jul 3 19:10:51 glitch kernel: usbserial.c: none matched Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA28X - (without firmware) Jul 3 19:10:51 glitch kernel: usbserial.c: none matched Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA49W - (without firmware) Jul 3 19:10:51 glitch kernel: usbserial.c: none matched Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA18X Jul 3 19:10:51 glitch kernel: usbserial.c: none matched Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA19 Jul 3 19:10:51 glitch kernel: usbserial.c: descriptor matches Jul 3 19:10:51 glitch kernel: usbserial.c: found bulk out Jul 3 19:10:51 glitch last message repeated 2 times Jul 3 19:10:51 glitch kernel: usbserial.c: found bulk in Jul 3 19:10:51 glitch last message repeated 3 times Jul 3 19:10:51 glitch kernel: usbserial.c: Keyspan USA19 converter detected Jul 3 19:10:51 glitch kernel: usbserial.c: get_free_serial 1 Jul 3 19:10:51 glitch kernel: usbserial.c: get_free_serial - minor base = 0 Jul 3 19:10:51 glitch kernel: usbserial.c: usb_serial_probe - setting up 4 port structures for this device Jul 3 19:10:51 glitch kernel: usbserial.c: Keyspan USA19 converter now attached to ttyUSB0 (or usb/tts/0 for devfs) Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA19W Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA28 Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA28X Jul 3 19:10:51 glitch kernel: usbserial.c: USB Serial support registered for Keyspan USA49W Jul 3 19:10:51 glitch kernel: keyspan.c: v1.0.0 Hugh Blemings <hugh@linuxcare.com> Jul 3 19:10:51 glitch kernel: keyspan.c: Keyspan USB to Serial Converter Driver Jul 3 19:10:56 glitch kernel: usbserial.c: serial_open Jul 3 19:10:56 glitch kernel: keyspan.c: keyspan_usa19_calc_baud 9600 ff b2. Jul 3 19:10:56 glitch kernel: usbserial.c: serial_ioctl - port 0, cmd 0x5401 Jul 3 19:10:56 glitch kernel: usbserial.c: serial_ioctl - port 0, cmd 0x5402 Jul 3 19:10:56 glitch kernel: usbserial.c: serial_set_termios - port 0 Jul 3 19:10:56 glitch kernel: keyspan.c: keyspan_usa19_calc_baud 9600 ff b2. Jul 3 19:10:56 glitch kernel: usbserial.c: serial_ioctl - port 0, cmd 0x5401 Jul 3 19:10:56 glitch kernel: usbserial.c: serial_ioctl - port 0, cmd 0x5401 Jul 3 19:10:56 glitch kernel: usbserial.c: serial_ioctl - port 0, cmd 0x5402 Jul 3 19:10:56 glitch kernel: usbserial.c: serial_set_termios - port 0 Jul 3 19:10:56 glitch kernel: keyspan.c: keyspan_usa19_calc_baud 9600 ff b2. Jul 3 19:10:56 glitch kernel: usbserial.c: serial_ioctl - port 0, cmd 0x5401 Jul 3 19:11:00 glitch kernel: usbserial.c: serial_write - port 0, 16 byte(s) Jul 3 19:11:00 glitch kernel: usbserial.c: serial_write - port 0, 26 byte(s) Jul 3 19:11:00 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:02 glitch kernel: usbserial.c: serial_write - port 0, 26 byte(s) Jul 3 19:11:02 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:04 glitch kernel: usbserial.c: serial_write - port 0, 26 byte(s) Jul 3 19:11:04 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:04 glitch kernel: usbserial.c: serial_ioctl - port 0, cmd 0x5401 Jul 3 19:11:04 glitch kernel: usbserial.c: serial_ioctl - port 0, cmd 0x5402 Jul 3 19:11:04 glitch kernel: usbserial.c: serial_set_termios - port 0 Jul 3 19:11:04 glitch kernel: keyspan.c: keyspan_usa19_calc_baud 9600 ff b2. Jul 3 19:11:04 glitch kernel: usbserial.c: serial_ioctl - port 0, cmd 0x5401 Jul 3 19:11:04 glitch kernel: usbserial.c: serial_write - port 0, 18 byte(s) Jul 3 19:11:04 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:06 glitch kernel: usbserial.c: serial_write - port 0, 18 byte(s) Jul 3 19:11:06 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:08 glitch kernel: usbserial.c: serial_write - port 0, 18 byte(s) Jul 3 19:11:08 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:10 glitch kernel: usbserial.c: serial_write - port 0, 18 byte(s) Jul 3 19:11:10 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:12 glitch kernel: usbserial.c: serial_write - port 0, 18 byte(s) Jul 3 19:11:12 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:14 glitch kernel: usbserial.c: serial_write - port 0, 18 byte(s) Jul 3 19:11:14 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:16 glitch kernel: usbserial.c: serial_write - port 0, 18 byte(s) Jul 3 19:11:16 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:18 glitch kernel: usbserial.c: serial_write - port 0, 18 byte(s) Jul 3 19:11:18 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:20 glitch kernel: usbserial.c: serial_write - port 0, 18 byte(s) Jul 3 19:11:20 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:22 glitch kernel: usbserial.c: serial_write - port 0, 18 byte(s) Jul 3 19:11:22 glitch kernel: usbserial.c: port_softint - port 0 Jul 3 19:11:24 glitch kernel: usbserial.c: serial_close - port 0 Jul 3 19:11:24 glitch kernel: keyspan.c: usa28_indat_callbacknonzero status: fffffffe on endpoint Jul 3 19:11:24 glitch kernel: 1. ----- <SNIP> ----- ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.4.5 keyspan driver 2001-07-04 0:16 ` Gregory T. Norris @ 2001-07-04 7:32 ` Greg KH 2001-07-04 17:04 ` Gregory T. Norris 0 siblings, 1 reply; 17+ messages in thread From: Greg KH @ 2001-07-04 7:32 UTC (permalink / raw) To: linux-kernel, linux-usb-users On Tue, Jul 03, 2001 at 07:16:56PM -0500, Gregory T. Norris wrote: > In the hopes that it might prove helpful, I reran coldsync after > loading usbserial.o and keyspan.o with the "debug=1" option. Here's > what was logged: Can you try the keyspan_pda.o driver and see if it also gives you problems? I posted a patch to linux-usb-devel that should solve the "vendor symbol not defined" bug for you. thanks, greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.4.5 keyspan driver 2001-07-04 7:32 ` Greg KH @ 2001-07-04 17:04 ` Gregory T. Norris 2001-07-04 21:24 ` 2.4.6 " Gregory T. Norris 0 siblings, 1 reply; 17+ messages in thread From: Gregory T. Norris @ 2001-07-04 17:04 UTC (permalink / raw) To: linux-kernel, linux-usb-users I've updated to 2.4.6, and applied the patch from linux-usb-devel. The keyspan_pda driver doesn't seem to detect the device at all. The keyspan driver detects it and creates /dev/usb/tts/0, but shows the same problems as before. On Wed, Jul 04, 2001 at 12:32:33AM -0700, Greg KH wrote: > On Tue, Jul 03, 2001 at 07:16:56PM -0500, Gregory T. Norris wrote: > > In the hopes that it might prove helpful, I reran coldsync after > > loading usbserial.o and keyspan.o with the "debug=1" option. Here's > > what was logged: > > Can you try the keyspan_pda.o driver and see if it also gives you > problems? > > I posted a patch to linux-usb-devel that should solve the "vendor symbol > not defined" bug for you. > > thanks, > > greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.4.6 keyspan driver 2001-07-04 17:04 ` Gregory T. Norris @ 2001-07-04 21:24 ` Gregory T. Norris 0 siblings, 0 replies; 17+ messages in thread From: Gregory T. Norris @ 2001-07-04 21:24 UTC (permalink / raw) To: linux-kernel, linux-usb-users Something else which may or may not help... I hooked my modem up to the Keyspan USA-19 adapter to see if that would make any difference. pppd wasn't able to dial out (no response from the modem), but the following was logged during the attempt: ----- <SNIP> ----- Jul 4 16:13:50 glitch kernel: keyspan_usa19_calc_baud 9600 ff b2.keyspan_usa28_send_setup already writingkeyspan_usa28_send_setup already writingkeyspan_usa28_send_setup already writingusa28_outcont_callback sending setupkeyspan_usa19_calc_baud 9600 ff b2.keyspan_usa19_calc_baud 9600 ff b2.keyspan_usa19_calc_baud 9600 ff b2.keyspan_usa19_calc_baud 9600 ff b2.usa28_indat_callbacknonzero status: fffffffe on endpoint ----- <SNIP> ----- ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2001-07-04 21:26 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-06-30 5:33 2.4.5 keyspan driver Gregory T. Norris
2001-06-30 18:37 ` Gregory T. Norris
2001-07-01 20:49 ` usbserial/keyspan module load race [was: 2.4.5 keyspan driver] Gregory T. Norris
2001-07-02 2:51 ` Greg KH
2001-07-02 22:26 ` Gregory T. Norris
[not found] ` <01070200025204.05063@idun>
2001-07-02 22:22 ` Gregory T. Norris
2001-07-02 22:43 ` Greg KH
2001-07-02 23:33 ` Gregory T. Norris
[not found] ` <01070123350102.05063@idun>
2001-07-02 22:23 ` Gregory T. Norris
2001-07-03 0:38 ` Gregory T. Norris
2001-07-03 17:38 ` 2.4.5 keyspan driver Greg KH
2001-07-03 22:19 ` Gregory T. Norris
2001-07-03 22:49 ` Gregory T. Norris
2001-07-04 0:16 ` Gregory T. Norris
2001-07-04 7:32 ` Greg KH
2001-07-04 17:04 ` Gregory T. Norris
2001-07-04 21:24 ` 2.4.6 " Gregory T. Norris
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).