linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephan von Krawczynski <skraw@ithnet.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Are linux-fs's drive-fault-tolerant by concept?
Date: Sun, 20 Apr 2003 18:24:13 +0200	[thread overview]
Message-ID: <20030420182413.7574930a.skraw@ithnet.com> (raw)
In-Reply-To: <1050789876.3961.22.camel@dhcp22.swansea.linux.org.uk>

On 19 Apr 2003 23:04:36 +0100
Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:

> On Sad, 2003-04-19 at 18:00, Stephan von Krawczynski wrote:
> > Ok, you mean active error-recovery on reading. My basic point is the
> > writing case. A simple handling of write-errors from the drivers level and
> > a retry to write on a different location could help a lot I guess.
> 
> It would make no difference. The IDE drive firmware already knows about
> such things.

Hm, maybe this is only another field where "knowing" differs from "doing" (the
right thing) sometimes.

> > Just to give some numbers: from 25 disk I bought during last half year 16
> > have gone dead within the first month. This is ridiculous. Of course they
> > are all returned and guarantee-replaced, but it gets on ones nerves to
> > continously replace disks, the rate could be lowered if one could use them
> > at least 4 months (or upto a deadline number of bad blocks mapped by the fs
> > - still guarantee but fewer replacement cycles).
> 
> I'd be changing vendors and also looking at my power/heat/vibration for
> that level of problems. I'm sure google consider hard disks as a
> consumable but not the rest of us 8)

Maybe I have something in common with google, I am re-writing large parts (well
over 50%) of the harddrives capacity on a daily basis (in the discussed setup).
How many people really do that?

Regards,
Stephan


  reply	other threads:[~2003-04-20 16:12 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-04-19 16:04 Are linux-fs's drive-fault-tolerant by concept? Stephan von Krawczynski
2003-04-19 15:29 ` Alan Cox
2003-04-19 17:00   ` Stephan von Krawczynski
2003-04-19 22:04     ` Alan Cox
2003-04-20 16:24       ` Stephan von Krawczynski [this message]
2003-04-20 13:59     ` John Bradford
2003-04-20 16:55       ` Stephan von Krawczynski
2003-04-20 17:12         ` John Bradford
2003-04-20 17:21           ` Stephan von Krawczynski
2003-04-20 18:48             ` Alan Cox
2003-04-20 20:00               ` John Bradford
2003-04-21  1:51                 ` jw schultz
2003-04-19 21:13   ` Jos Hulzink
2003-04-20 16:07     ` Stephan von Krawczynski
2003-04-20 16:40       ` John Bradford
2003-04-20 17:01         ` Stephan von Krawczynski
2003-04-20 17:20           ` John Bradford
2003-04-21  9:32             ` Stephan von Krawczynski
2003-04-21  9:55               ` John Bradford
2003-04-21 11:24                 ` Stephan von Krawczynski
2003-04-21 11:50                   ` Alan Cox
2003-04-21 12:14                   ` John Bradford
2003-04-19 16:22 ` John Bradford
2003-04-19 16:36   ` Russell King
2003-04-19 16:45     ` John Bradford
2003-04-19 16:52   ` Stephan von Krawczynski
2003-04-19 20:04     ` John Bradford
2003-04-19 20:33       ` Andreas Dilger
2003-04-21  9:25         ` Denis Vlasenko
2003-04-21  9:42           ` John Bradford
2003-04-21 10:25             ` Stephan von Krawczynski
2003-04-21 10:50               ` John Bradford
2003-04-19 20:38       ` Stephan von Krawczynski
2003-04-20 14:21         ` John Bradford
2003-04-21  9:09           ` Denis Vlasenko
2003-04-21  9:35             ` John Bradford
2003-04-21 11:03               ` Stephan von Krawczynski
2003-04-21 12:04                 ` John Bradford
2003-04-21 11:22               ` Denis Vlasenko
2003-04-21 11:46                 ` Stephan von Krawczynski
2003-04-21 12:13                 ` John Bradford
2003-04-19 20:05     ` John Bradford
2003-04-19 23:13     ` Arnaldo Carvalho de Melo
2003-04-19 17:54   ` Felipe Alfaro Solana
2003-04-25  0:07   ` Stewart Smith
2003-04-25  0:52     ` Richard B. Johnson
2003-04-25  7:13       ` John Bradford
     [not found] ` <20030419161011$0136@gated-at.bofh.it>
2003-04-19 17:18   ` Florian Weimer
2003-04-19 18:07     ` Stephan von Krawczynski
2003-04-19 18:41       ` Dr. David Alan Gilbert
2003-04-19 20:56         ` Helge Hafting
2003-04-19 21:15           ` Valdis.Kletnieks
2003-04-20 10:51             ` Helge Hafting
2003-04-20 19:04               ` Valdis.Kletnieks
2003-04-19 21:57         ` Alan Cox
2003-04-20 10:09         ` Geert Uytterhoeven
2003-04-21  8:37         ` Denis Vlasenko
2003-05-05 12:38         ` Pavel Machek
2003-04-19 22:02     ` Alan Cox
2003-04-20  8:41       ` Arjan van de Ven
2003-04-25  0:11     ` Stewart Smith
2003-04-20 15:06 Chuck Ebbert
2003-04-20 15:19 ` John Bradford
2003-04-20 17:03 Chuck Ebbert
2003-04-20 17:25 ` John Bradford
2003-04-20 17:28 Chuck Ebbert
2003-04-21  9:36 ` Stephan von Krawczynski
2003-04-20 17:28 Chuck Ebbert
2003-04-20 17:44 Chuck Ebbert
2003-04-20 17:44 Chuck Ebbert
     [not found] <mail.linux.kernel/20030420185512.763df745.skraw@ithnet.com>
     [not found] ` <03Apr21.020150edt.41463@gpu.utcc.utoronto.ca>
2003-04-21 11:19   ` Stephan von Krawczynski
2003-04-21 11:52     ` Alan Cox
2003-04-21 14:14     ` Valdis.Kletnieks
2003-05-06  7:03       ` Mike Fedyk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030420182413.7574930a.skraw@ithnet.com \
    --to=skraw@ithnet.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).