Re: [FIXED 2.5.69] Re: [2.5.67 - 2.5.68] Hangs on pcmcia yenta_socket initialisation

Re: [FIXED 2.5.69] Re: [2.5.67 - 2.5.68] Hangs on pcmcia yenta_socket initialisation

[Matthew Harrell]

: It was the fact that when I booted my system with my 3com cardbus NIC inserted 
: in the slot it would oops, giving me a non-working pcmcia/cardbus system.
: 
: Booting without the card worked fine, and inserting the card afterwards also 
: worked great.
: 
: thread is here:
: 
: http://marc.theaimsgroup.com/?l=linux-kernel&m=105107713129722&w=2

Oh, mine's different.  Total lockup with no messages.  Starts a few seconds 
after the yenta module is loaded.  I think it occurs during the yenta probe
but I haven't been able to prove that yet.  

: Ah. I don't use ACPI, because well... it caused me more pain than it helped me 
: in the past, in both OS' on my system (being Linux and win2k)

Yeah, it's a pain but this laptop no longer has APM so I need some way to read
my batteries and soft power the system off.  But, if it weren't for the 
batteries I wouldn't bother because it is a real pain to deal with

-- 
  Matthew Harrell                          I love defenseless animals,
  Bit Twiddlers, Inc.                       especially in a good gravy.
  mharrell@bittwiddlers.com     

Re: [FIXED 2.5.69] Re: [2.5.67 - 2.5.68] Hangs on pcmcia yenta_socket initialisation

[DevilKin]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wednesday 07 May 2003 01:48, Matthew Harrell wrote:
> Was this one you reported - I didn't see this one.

It was the fact that when I booted my system with my 3com cardbus NIC inserted 
in the slot it would oops, giving me a non-working pcmcia/cardbus system.

Booting without the card worked fine, and inserting the card afterwards also 
worked great.

thread is here:

http://marc.theaimsgroup.com/?l=linux-kernel&m=105107713129722&w=2

>
> I still get a hang on any 2.5.50+ kernel when I load yenta and have ACPI
> turned on.  It locks solid about three seconds after loading the module
>

Ah. I don't use ACPI, because well... it caused me more pain than it helped me 
in the past, in both OS' on my system (being Linux and win2k)

Jan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE+uJdQpuyeqyCEh60RAv/oAKCAUsots5uqvrL0O3dsrBGVXJ9icwCfQS/c
H6BRfG+uFkYWWsFQL8SJsSs=
=cGpw
-----END PGP SIGNATURE-----

Re: [FIXED 2.5.69] Re: [2.5.67 - 2.5.68] Hangs on pcmcia yenta_socket initialisation

[Matthew Harrell]

Was this one you reported - I didn't see this one.  

I still get a hang on any 2.5.50+ kernel when I load yenta and have ACPI
turned on.  It locks solid about three seconds after loading the module


> 
> Just reporting that this now works fine under 2.5.69. Whatever the problem, 
> it's definitely gone now.
> 

-- 
  Matthew Harrell                          Preserve wildlife --
  Bit Twiddlers, Inc.                       pickle a squirrel today!
  mharrell@bittwiddlers.com     

[FIXED 2.5.69] Re: [2.5.67 - 2.5.68] Hangs on pcmcia yenta_socket initialisation

[DevilKin]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Just reporting that this now works fine under 2.5.69. Whatever the problem, 
it's definitely gone now.

DK
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE+tiX5puyeqyCEh60RAvk1AJ9Qvygxk+70PFSKSSLKTgUi2mWmJwCaAjf0
5AR6Cz0LF6fC9g6Nd5t2eP8=
=o4WM
-----END PGP SIGNATURE-----