[2.5.69/i386] rmmod ohci_hcd - deadlock

[2.5.69/i386] rmmod ohci_hcd - deadlock

[Florian Lohoff]

[-- Attachment #1: Type: text/plain, Size: 2040 bytes --]


Hi,
i am seeing a deadlock on removal of the ohci_hcd module. You get to see
some usb disconnect messages after which the machine is dead and needs
to be powercycled. This is a Sony Vaio C1MHP. I am unable to test 2.5.70
because it hangs on boot with unhandled IRQs.

This also happens when unloading the usb-storage module beforehand.

00:14.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03) (prog-if 10 [OHCI])
	Subsystem: Sony Corporation: Unknown device 80ec
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (20000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at 000e0000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

lsusb:

Module                  Size  Used by
8139too                14336  1 
mii                     2528  1 8139too
crc32                   2944  1 8139too
snd_ali5451            12004  0 
snd_ac97_codec         32900  1 snd_ali5451
snd_pcm                53568  1 snd_ali5451
snd_page_alloc          3876  1 snd_pcm
snd_timer              13152  1 snd_pcm
snd                    27904  4 snd_ali5451,snd_ac97_codec,snd_pcm,snd_timer
soundcore               3680  1 snd
usb_storage            19232  0 
scsi_mod               73132  1 usb_storage
ohci_hcd               11680  0 
usbcore                65332  4 usb_storage,ohci_hcd
ohci1394               22720  0 
ieee1394               42376  1 ohci1394

lsusb:

Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 002: ID 054c:0069 Sony Corp. Memorystick MSC-U03 Reader
Bus 001 Device 001: ID 0000:0000  

Flo
-- 
Florian Lohoff                  flo@rfc822.org             +49-5201-669912
                        Heisenberg may have been here.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [2.5.69/i386] rmmod ohci_hcd - deadlock

[Greg KH]

On Tue, May 27, 2003 at 03:04:21PM +0200, Florian Lohoff wrote:
> 
> Hi,
> i am seeing a deadlock on removal of the ohci_hcd module. You get to see
> some usb disconnect messages after which the machine is dead and needs
> to be powercycled. This is a Sony Vaio C1MHP. I am unable to test 2.5.70
> because it hangs on boot with unhandled IRQs.

This should be fixed in 2.5.70.  If not, please let us know.

thanks,

greg k-h