Re: 2.6.0-test4-mm3

Re: 2.6.0-test4-mm3

[Boszormenyi Zoltan]

[-- Attachment #1: Type: text/plain, Size: 808 bytes --]

Hi,

I tried to "make modules_install" on the compiled tree.
It says:

# make modules_install
Install a current version of module-init-tools
See http://www.codemonkey.org.uk/post-halloween-2.5.txt
make: *** [_modinst_] Error 1

But I have installed it! It's called modutils-2.4.25-8
(was -5 previously) from RH rawhide, it works on older
(2.6.0-test4-mm1) kernels.
This modutils is united with module-init-tools-0.9.12,
it reports version 2.4.25 but detects newer kernels and uses
the new module interface.

I looked the kernel Makefile and found that it greps the version
it gets from depmod -V and wants module-init-tools.
My fix against the rawhide modutils is attached.

-- 
Best regards,
Zoltán Böszörményi

---------------------
What did Hussein say about his knife?
One in Bush worth two in the hand.

[-- Attachment #2: modutils.spec.diff --]
[-- Type: text/plain, Size: 829 bytes --]

--- modutils.spec.old	2003-08-29 11:43:10.000000000 +0200
+++ modutils.spec	2003-08-29 11:45:06.000000000 +0200
@@ -4,7 +4,7 @@
 Summary: Kernel module management utilities.
 Name: modutils
 Version: 2.4.25
-Release: 8
+Release: 8.1
 Copyright: GPL
 Group: System Environment/Kernel
 Source: ftp://ftp.kernel.org/pub/linux/utils/kernel/modutils/v2.4/modutils-%{version}.tar.bz2
@@ -23,6 +23,7 @@
 Patch13: module-init-tools-0.9.12-depmod-leak.patch
 Patch101: modutils-2.4.18-small.patch
 Patch1000: modutils-module-init-tools.patch
+Patch1001: module-init-tools-version-hack.patch
 Exclusiveos: Linux
 Prereq: /sbin/chkconfig sh-utils
 Obsoletes: modules
@@ -58,6 +59,7 @@
 %patch12 -p1 -b .updates
 ln -s module-init-tools-%{mitver} module-init-tools
 %patch13 -p1 -b .leak
+%patch1001 -p1 -b .version
 
 %build
 autoconf-2.13

[-- Attachment #3: module-init-tools-version-hack.patch --]
[-- Type: text/plain, Size: 284 bytes --]

--- modutils-2.4.25/include/version.h.old	2003-08-29 11:41:54.000000000 +0200
+++ modutils-2.4.25/include/version.h	2003-08-29 11:41:54.000000000 +0200
@@ -1 +1 @@
-#define MODUTILS_VERSION "2.4.25"
+#define MODUTILS_VERSION "2.4.25 + module-init-tools-0.9.12 RedHat unified version"

Re: 2.6.0-test4-mm3

[Bas Mevissen]

Boszormenyi Zoltan wrote:

> Hi,
> 
> I tried to "make modules_install" on the compiled tree.
> It says:
> 
> # make modules_install
> Install a current version of module-init-tools
> See http://www.codemonkey.org.uk/post-halloween-2.5.txt
> make: *** [_modinst_] Error 1
> 
> But I have installed it! It's called modutils-2.4.25-8
> (was -5 previously) from RH rawhide, it works on older
> (2.6.0-test4-mm1) kernels.
> This modutils is united with module-init-tools-0.9.12,
> it reports version 2.4.25 but detects newer kernels and uses
> the new module interface.
> 
> I looked the kernel Makefile and found that it greps the version
> it gets from depmod -V and wants module-init-tools.
> My fix against the rawhide modutils is attached.
> 

Can you do a diff of the Makefile between 2.6.0-test4-mm1 and ...mm3

Regards,

Bas

Re: 2.6.0-test4-mm3

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 444 bytes --]

On Fri, 29 Aug 2003 11:54:27 +0200, Boszormenyi Zoltan <zboszor@freemail.hu>  said:

> I tried to "make modules_install" on the compiled tree.
> It says:
> 
> # make modules_install
> Install a current version of module-init-tools
> See http://www.codemonkey.org.uk/post-halloween-2.5.txt
> make: *** [_modinst_] Error 1

Whoops... My fault. ;)

It was mostly a proof of concept - if there's a *known* better test I'm all ears. ;)

[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

Re: 2.6.0-test4-mm3

[Martin Schlemmer]

On Fri, 2003-08-29 at 16:55, Martin Schlemmer wrote:
> On Fri, 2003-08-29 at 15:00, Valdis.Kletnieks@vt.edu wrote:
> > On Fri, 29 Aug 2003 11:54:27 +0200, Boszormenyi Zoltan <zboszor@freemail.hu>  said:
> > 
> > > I tried to "make modules_install" on the compiled tree.
> > > It says:
> > > 
> > > # make modules_install
> > > Install a current version of module-init-tools
> > > See http://www.codemonkey.org.uk/post-halloween-2.5.txt
> > > make: *** [_modinst_] Error 1
> > 
> > Whoops... My fault. ;)
> > 
> > It was mostly a proof of concept - if there's a *known*
> > better test I'm all ears. ;)
> 
> Cannot think of one that is known.  An quick solution
> your (and not RH) side, might be something like below.
> I am though not 100% sure if this will work (does the RH
> patches check for modules present before calling bins
> from module-init-tools, or do they just yield if they
> detect a newer kernel?), so if somebody on a RH box could
> test it ...
> 
> The basic concept is that modprobe from modutils start
> an error message with 'modprobe:' and the one from
> module-init-tools starts with 'FATAL:'.
> 
> Another issue you may want to consider, is that modprobe
> from module-init-tools use the 'create_module' syscall
> to determine the kernel version, and I think that the RH
> patches does as well .... what are you going to do if its
> a 2.4 kernel running, but module-init-tools are installed?
> In this case even my patch are going to fail.  I guess thus
> that you will have to try and get Boszormenyi's changes
> applied RH side ...
> 
> ---------------
> iff -puN Makefile~old-module-tools-warning Makefile
> --- 25/Makefile~old-module-tools-warning	Thu Aug 28 14:24:35 2003
> +++ 25-akpm/Makefile	Thu Aug 28 14:24:35 2003
> @@ -606,6 +606,11 @@ modules_install: _modinst_ _modinst_post
>  
>  .PHONY: _modinst_
>  _modinst_:
> +	@if [ -z "`modprobe -n foobar 2>&1 | egrep '^FATAL:'`" ]; then \
> +		echo "Install a current version of module-init-tools"; \
> +		echo "See http://www.codemonkey.org.uk/post-halloween-2.5.txt";\
> +		/bin/false; \
> +	fi
>  	@rm -rf $(MODLIB)/kernel
>  	@rm -f $(MODLIB)/build
>  	@mkdir -p $(MODLIB)/kernel
> 
----------------------

Seems like above never made it out.  Anyhow, adding anything
like this that fails is no good, except maybe if it checks
current kernel, and if depmod then do not return a version
consistent with module-init-tools if we are using a 2.5/6 kernel,
fail.  Reason for this, is that even with the '-V' switch,
depmod.old will be called and the incorrect version supplied if
we are currently on a 2.4 kernel ....


Regards,

-- 
Martin Schlemmer

Re: 2.6.0-test4-mm3

[Martin Schlemmer]

[-- Attachment #1: Type: text/plain, Size: 1619 bytes --]

On Fri, 2003-08-29 at 17:53, Valdis.Kletnieks@vt.edu wrote:
> On Fri, 29 Aug 2003 16:55:47 +0200, Martin Schlemmer said:
> 
> > Cannot think of one that is known.  An quick solution
> > your (and not RH) side, might be something like below.
> 
> What about something like this instead?  I tested it with the module-init-tools
> and stock RH9 depmods...
> 
> Only complain if the depmod actually fails:
> 
> --- Makefile.hold	2003-08-27 01:52:20.000000000 -0400
> +++ Makefile	2003-08-29 11:52:15.542286300 -0400
> @@ -209,7 +209,7 @@
>  RPM 		:= $(shell if [ -x "/usr/bin/rpmbuild" ]; then echo rpmbuild; \
>  		    	else echo rpm; fi)
>  GENKSYMS	= scripts/genksyms/genksyms
> -DEPMOD		= /sbin/depmod
> +DEPMOD		= /sbin/depmod.old
>  KALLSYMS	= scripts/kallsyms
>  PERL		= perl
>  CHECK		= sparse
> @@ -612,7 +612,14 @@
>  endif
>  .PHONY: _modinst_post
>  _modinst_post: _modinst_
> -	if [ -r System.map ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
> +	@if [ -r System.map ]; then \
> +		if ! $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE)   ; then \
> +			echo "*** Depmod failed!!!"; \
> +			echo "*** You may need to install a current version of module-init-tools"; \
> +			echo "*** See http://www.codemonkey.org.uk/post-halloween-2.5.txt"; \
> +			exit 1; \
> +	 	fi \
> +	fi
>  
>  else # CONFIG_MODULES

Hmm, this will only work with RH based systems (not using here).  I
think the best way is how Andrew did it to just warn if depmod fails.
You may agree to disagree if need be :)


Regards,

-- 

Martin Schlemmer




[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: 2.6.0-test4-mm3

[Sam Ravnborg]

On Mon, Sep 01, 2003 at 10:23:30PM +0200, Martin Schlemmer wrote:
> 
> Hmm, this will only work with RH based systems (not using here).  I
> think the best way is how Andrew did it to just warn if depmod fails.
> You may agree to disagree if need be :)

Andrew's version is already in mainline.

	Sam

Re: 2.6.0-test4-mm3

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 1078 bytes --]

On Mon, 01 Sep 2003 22:23:30 +0200, Martin Schlemmer said:

> > +		if ! $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE
)   ; t=
> hen \
> > +			echo "*** Depmod failed!!!"; \
> > +			echo "*** You may need to install a current version of 
module-init-to=
> ols"; \
> > +			echo "*** See http://www.codemonkey.org.uk/post-hallowe
en-2.5.txt"; \
> > +			exit 1; \
> > +	 	fi \
> > +	fi
> > =20
> >  else # CONFIG_MODULES
> 
> Hmm, this will only work with RH based systems (not using here).  I
> think the best way is how Andrew did it to just warn if depmod fails.
> You may agree to disagree if need be :)

Umm.. how will this fail for *any* system that has a sane 'depmod' (sane as in
"calls exit(0) if it worked"?  In this patch we never actually check the
version - we just add code that "if depmod fails during 'make install_modules',
it may be too old and give them a hint".

(Incidentally, I tested it with the RH9 depmod, the Rusty depmod,  and the
Rawhide depmod - for Rusty and Rawhide it was silent, the older RH9 depmod
barfed and then gave the hint...)


[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

Re: 2.6.0-test4-mm3

[Martin Schlemmer]

[-- Attachment #1: Type: text/plain, Size: 1290 bytes --]

On Tue, 2003-09-02 at 01:52, Valdis.Kletnieks@vt.edu wrote:
> On Mon, 01 Sep 2003 22:23:30 +0200, Martin Schlemmer said:
> 
> > > +		if ! $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE
> )   ; t=
> > hen \
> > > +			echo "*** Depmod failed!!!"; \
> > > +			echo "*** You may need to install a current version of 
> module-init-to=
> > ols"; \
> > > +			echo "*** See http://www.codemonkey.org.uk/post-hallowe
> en-2.5.txt"; \
> > > +			exit 1; \
> > > +	 	fi \
> > > +	fi
> > > =20
> > >  else # CONFIG_MODULES
> > 
> > Hmm, this will only work with RH based systems (not using here).  I
> > think the best way is how Andrew did it to just warn if depmod fails.
> > You may agree to disagree if need be :)
> 
> Umm.. how will this fail for *any* system that has a sane 'depmod' (sane as in
> "calls exit(0) if it worked"?  In this patch we never actually check the
> version - we just add code that "if depmod fails during 'make install_modules',
> it may be too old and give them a hint".
> 

The problem I have with the patch you had here, is you changed:

DEPMOD         = /sbin/depmod

to:

DEPMOD         = /sbin/depmod.old

which is only the one from module-init-tools on a RH system ....


Cheers,

-- 

Martin Schlemmer




[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: 2.6.0-test4-mm3

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 751 bytes --]

On Tue, 02 Sep 2003 06:14:04 +0200, Martin Schlemmer said:

> The problem I have with the patch you had here, is you changed:
> 
> DEPMOD         = /sbin/depmod
> 
> to:
> 
> DEPMOD         = /sbin/depmod.old
> 
> which is only the one from module-init-tools on a RH system ....

Damn.  Somebody hand me a brown paper bag. :)

(Make note to self - next time, diff the right 2 versions, not the testing version ;)

I got misdirected by your comment "this will only work with RH based systems",
because (a) neither the RH9 or Rawhide tools include a depmod.old, (b)
depmod.old gets created on non-Redhat systems if you install the Rusty version,
and (c) using depmod.old *wont* work - so I totally failed to notice I'd
botched the value of $DEPMOD. ;)


[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

Re: 2.6.0-test4-mm3

[Andrew Morton]

Boszormenyi Zoltan <zboszor@freemail.hu> wrote:
>
> I tried to "make modules_install" on the compiled tree.
> It says:
> 
> # make modules_install
> Install a current version of module-init-tools
> See http://www.codemonkey.org.uk/post-halloween-2.5.txt
> make: *** [_modinst_] Error 1
> 
> But I have installed it! It's called modutils-2.4.25-8
> (was -5 previously) from RH rawhide, it works on older
> (2.6.0-test4-mm1) kernels.
> This modutils is united with module-init-tools-0.9.12,
> it reports version 2.4.25 but detects newer kernels and uses
> the new module interface.

Tricky.

It's wrong of the Red Hat package to misidentify itself in this manner.

It would sort-of make sense for `depmod -V' to autodetect the kernel
version and print either "modutils" or "module-init-utils".  But that's not
accurate either: a `make modules_install' would fail when performed under a
2.4 kernel.

So yes, I think that your patch to RH modutils+module-init-tools is the best
approach: after all, it tells the truth.

Meanwhile, I'll alter Valdis's patch so that it warns, but does not fail
the make.

Re: 2.6.0-test4-mm3

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 1304 bytes --]

On Fri, 29 Aug 2003 08:35:40 PDT, Andrew Morton said:

> Meanwhile, I'll alter Valdis's patch so that it warns, but does not fail
> the make.
> 

I've sent Andrew an updated patch (attached) which issues a warning if the
final depmod actually fails.  The user won't know there's a problem till the
very end of 'make modules_install', but at least it will give them a hint of
where to go for self-help.  

--- Makefile.hold	2003-08-27 01:52:20.000000000 -0400
+++ Makefile	2003-08-29 11:52:15.542286300 -0400
@@ -209,7 +209,7 @@
 RPM 		:= $(shell if [ -x "/usr/bin/rpmbuild" ]; then echo rpmbuild; \
 		    	else echo rpm; fi)
 GENKSYMS	= scripts/genksyms/genksyms
-DEPMOD		= /sbin/depmod
+DEPMOD		= /sbin/depmod.old
 KALLSYMS	= scripts/kallsyms
 PERL		= perl
 CHECK		= sparse
@@ -612,7 +612,14 @@
 endif
 .PHONY: _modinst_post
 _modinst_post: _modinst_
-	if [ -r System.map ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
+	@if [ -r System.map ]; then \
+		if ! $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE)   ; then \
+			echo "*** Depmod failed!!!"; \
+			echo "*** You may need to install a current version of module-init-tools"; \
+			echo "*** See http://www.codemonkey.org.uk/post-halloween-2.5.txt"; \
+			exit 1; \
+	 	fi \
+	fi
 
 else # CONFIG_MODULES
 



[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

Re: 2.6.0-test4-mm3

[Cliff White]

> Boszormenyi Zoltan <zboszor@freemail.hu> wrote:
> >
> > I tried to "make modules_install" on the compiled tree.
> > It says:
> > 
> > # make modules_install
> > Install a current version of module-init-tools
> > See http://www.codemonkey.org.uk/post-halloween-2.5.txt
> > make: *** [_modinst_] Error 1
> > 
> > But I have installed it! It's called modutils-2.4.25-8
> > (was -5 previously) from RH rawhide, it works on older
> > (2.6.0-test4-mm1) kernels.
> > This modutils is united with module-init-tools-0.9.12,
> > it reports version 2.4.25 but detects newer kernels and uses
> > the new module interface.
> 
> Tricky.
> 
> It's wrong of the Red Hat package to misidentify itself in this manner.
> 
> It would sort-of make sense for `depmod -V' to autodetect the kernel
> version and print either "modutils" or "module-init-utils".  But that's not
> accurate either: a `make modules_install' would fail when performed under a
> 2.4 kernel.
> 
> So yes, I think that your patch to RH modutils+module-init-tools is the best
> approach: after all, it tells the truth.
> 
> Meanwhile, I'll alter Valdis's patch so that it warns, but does not fail
> the make.
> 

This also breaks STP. We installed module-init-tools using the 'moveold' 
method,
so we can still run 2.4.
Our depmod is in /usr/local/sbin. 
Using /sbin/depmod hoses us. Using PATH works for us.

[root@stp1-002 linux]# depmod -V
module-init-tools 0.9.12

[root@stp1-002 linux]# /sbin/depmod -V
depmod version 2.4.22

[root@stp1-002 linux]# /usr/local/sbin/depmod -V
module-init-tools 0.9.12

Please send patch, we'll get some tests moving.
cliffw

> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

Re: 2.6.0-test4-mm3

[Andrew Morton]

Cliff White <cliffw@osdl.org> wrote:
>
> This also breaks STP. We installed module-init-tools using the 'moveold' 
> method,
> so we can still run 2.4.
> Our depmod is in /usr/local/sbin. 
> Using /sbin/depmod hoses us. Using PATH works for us.

Hrm, but your build must be playing up already:

dhcp-140-218:/usr/src/25> grep DEPMOD Makefile
DEPMOD          = /sbin/depmod
        @if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \
        if [ -r System.map ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi

> [root@stp1-002 linux]# depmod -V
> module-init-tools 0.9.12
> 
> [root@stp1-002 linux]# /sbin/depmod -V
> depmod version 2.4.22
> 
> [root@stp1-002 linux]# /usr/local/sbin/depmod -V
> module-init-tools 0.9.12
> 
> Please send patch, we'll get some tests moving.

--- 25/Makefile~old-module-tools-warning-fix	Fri Aug 29 09:31:46 2003
+++ 25-akpm/Makefile	Fri Aug 29 09:32:16 2003
@@ -609,7 +609,7 @@ _modinst_:
 	@if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \
 		echo "Install a current version of module-init-tools"; \
 		echo "See http://www.codemonkey.org.uk/post-halloween-2.5.txt";\
-		/bin/false; \
+		sleep 1; \
 	fi
 	@rm -rf $(MODLIB)/kernel
 	@rm -f $(MODLIB)/build

_

Re: 2.6.0-test4-mm3

[Martin Schlemmer]

On Fri, 2003-08-29 at 18:27, Cliff White wrote:

Hi

> This also breaks STP. We installed module-init-tools using the 'moveold' 
> method,
> so we can still run 2.4.
> Our depmod is in /usr/local/sbin. 
> Using /sbin/depmod hoses us. Using PATH works for us.
> 
> [root@stp1-002 linux]# depmod -V
> module-init-tools 0.9.12
> 
> [root@stp1-002 linux]# /sbin/depmod -V
> depmod version 2.4.22
> 
> [root@stp1-002 linux]# /usr/local/sbin/depmod -V
> module-init-tools 0.9.12
> 

You guys are sorda missing the point of 'moveold' ....
You want to build it with '--prefix=/' so that
both depmod and depmod.old are in /sbin ....

----------------------
workshop root # ls /sbin/depmod* -l
-rwxr-xr-x    1 root     root        58744 Aug  4 17:19 /sbin/depmod
-rwxr-xr-x    1 root     root        58712 Aug  4 13:57 /sbin/depmod.old
workshop root # ls /sbin/modprobe* -l
lrwxrwxrwx    1 root     root            6 Aug  4 17:19 /sbin/modprobe
-> insmod
lrwxrwxrwx    1 root     root           10 Aug  4 13:57
/sbin/modprobe.old -> insmod.old
lrwxrwxrwx    1 root     root           13 Aug  4 17:19
/sbin/modprobe.static -> insmod.static
workshop root # 
------------------

Any call will then thus run depmod/whatever from module-init-tools
first, and if the kernel is 2.4, etc, it will call
depmod.old/whatever ...


Regards,

-- 
Martin Schlemmer

2.6.0-test4-mm3

[Andrew Morton]

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test4/2.6.0-test4-mm3/


. Lots of small fixes.

. The kswapd-chews-tons-of-CPU problem should be fixed.






Changes since 2.6.0-test4-mm2:


 huge-net-update.patch

 Updated

-proc-net-igmp-oops-fix.patch

 Merged into huge-net-update.patch

-no-root-device-option.patch

 This broke things.

+proc-kallsyms-caching-fix.patch

 Fix caching of /proc/kallsyms contents

-futex-minor-fixes.patch

 This is still changing.

+large-dev_t-12-fix.patch

 oops fix.

+evdev_ioctl-fix.patch

 input driver fix

+as-no-initial-antic.patch

 Anticipatory scheduler special-case fix

+mark-devfs-obsolete.patch

 Mark devfs as obsolete.

+hch-contacts-update.patch

 hch has moved

+h8300-include-update.patch

 h8300 fixes

+cyclades-isa-fix.patch

 serial driver fix

+old-module-tools-warning.patch

 Emit a warning if the user doesn't have the new module tools installed

+arcnet-printk-fix.patch

 Driver fixlet

+floppy-cleanup.patch
+floppy-more-cleanup.patch

 Floppy cleanups.

+v850-nommu-export-fixes.patch
+v850-RODATA-fix.patch

 v850 update

+dnotify-use-tgid.patch

 Use threadgroup ID for delivery of dnotify signals.

+send_sigio-decl-fix.patch

 Cleanup

+ipc-use-tgid.patch

 Use thread group ID for sysv IPC.

+voyager-cpumask_t-fix.patch

 Voyager race fix.

+mtrr-attrib_to_str-consolidation.patch

 Remove some code duplication

+ioctl_end-fix.patch

 Fix compat ioctl tables

+raw-driver-fixes.patch

 /dev/raw oops fix

+ipc_init-shuffle.patch

 Initialise the IPC system later.

+zone-pressure-fixes.patch
+zone-pressure-simplification.patch

 memory reclaim fixes

+sched-CAN_MIGRATE_TASK-fix.patch

 Task migrationfix

+4g4g-slab-__get_user-fix.patch

 4G/4G /proc/slabinfo fix

+aio-O_SYNC-fix-missing-bit.patch

 Lost AIO bits.




All 257 patches:

linus.patch

mm.patch
  add -mmN to EXTRAVERSION

kgdb-ga.patch
  kgdb stub for ia32 (George Anzinger's one)
  kgdbL warning fix

kgdb-warning-fix.patch
  kgdbL warning fix

kgdb-build-fix.patch

kgdb-spinlock-fix.patch

kgdb-fix-debug-info.patch
  kgdb: CONFIG_DEBUG_INFO fix

kgdb-cpumask_t.patch

kgdb-x86_64-fixes.patch
  x86_64 fixes

handle-unreadable-dot-config.patch
  .config checks updated

huge-net-update.patch
  net update

config_spinline.patch
  uninline spinlocks for profiling accuracy.

ppc64-build-fixes.patch
  Fix ppc64 breakage

ppc64-bar-0-fix.patch
  Allow PCI BARs that start at 0

ppc64-reloc_hide.patch

ppc64-semaphore-reimplementation.patch
  ppc64: use the ia32 semaphore implementation

ppc64-local.patch
  ppc64: local.h implementation

ppc64-sched_clock.patch
  ppc64: sched_clock()

sym-do-160.patch
  make the SYM driver do 160 MB/sec

x86_64-update-3.patch
  x86-64 update for test4

random-locking-fixes.patch
  random: SMP locking

random-accounting-and-sleeping-fixes.patch
  random: accounting and sleeping fixes

rt-tasks-special-vm-treatment.patch
  real-time enhanced page allocator and throttling

rt-tasks-special-vm-treatment-2.patch

input-use-after-free-checks.patch
  input layer debug checks

deadline-requeue-workaround.patch
  deadline requeue workaround

fbdev.patch

tdfx-build-fix.patch
  tdfx linkage fix

cursor-flashing-fix.patch
  fbdev: fix cursor letovers

disable-athlon-prefetch.patch

sis900-atomicity-fix.patch
  sis900 atomicity fix

slab-hexdump.patch
  slab: hexdump structures when things go wrong

aic7xxx-parallel-build-fix.patch
  fix parallel builds for aic7xxx

yenta-20030817-1-zv.patch

yenta-20030817-2-override.patch

yenta-20030817-3-sockinit.patch

yenta-20030817-4-pm.patch

yenta-20030817-5-pm2.patch

yenta-20030817-6-init.patch

yenta-20030817-7-quirks.patch

proc-pid-setuid-ownership-fix.patch
  fix /proc/pid/fd ownership across setuid()

pid-revalidate-security-hook.patch
  Call security hook from pid*_revalidate

dac960-GAM-IOCTLs-cleanup.patch
  move DAC960 GAM IOCTLs into a new device

thread-pgrp-fix-2.patch
  Fix setpgid and threads

kj-maintainers.patch
  Add the kernel janitors to MAINTAINERS

ide-docs-update.patch
  Update ide.txt documentation to current ide.c

ramdisk-cleanup.patch

v4l-use-after-free-fix.patch
  Fix bug in v4l core for 2.6.0-test3-bk

ikconfig-makefile-update.patch
  ikconfig - Makefile update

ftape-warning-fix.patch
  Fix ftape warning

jffs-retval-fix.patch
  jffs aops return type fix

delay-ksoftirqd-fallback.patch
  Try harded in IRQ context before falling back to ksoftirqd

intel8x0-cleanup.patch
  intel8x0 cleanups

make-ACPI_SLEEP-select-SOFTWARE_SUSPEND.patch
  Make ACPI_SLEEP select SOFTWARE_SUSPEND

3GB-personality.patch
  Add 3GB personality

zeromap_pmd_range-fix.patch
  zeromap_pmd_range bugfix

no-async-write-errors-on-close.patch
  don't report async write errors on close() after all

sis190-fix.patch
  sis190 synchronize_irq fix

remove-add_wait_queue_cond.patch
  remove add_wait_queue_cond()

spin_lock_irqrestore-fixes.patch
  spin_lock_irqrestore() typo fixes

pcmciamtd-fix.patch
  pcmciamtd.c: remove release timer

zoran-memleak-fixes.patch
  zoran: memleak fixes

zoran-rename-debug.patch
  zoran: debug->zr_debug

zoran-release-callback.patch
  zoran: add release callback

zoran-pci_disable_device.patch
  zoranL: add pci_disable_device() call

zoran-cleanups.patch
  zoran: cleanups

zoran-cleanups-2.patch
  zoran: more cleanups

zoran-naming-fix.patch
  zoran: correct name field breakage

airo-build-fix.patch
  airo CONFIG_PCI=n build fix

m68k-vmlinux_lds-move.patch
  move m68k vmlinux.lds files

mac-ide-fix.patch
  Fix Mac IDE

m68k-asm-sections-fix.patch
  m68k asm/sections.h

m68k-asm-local.patch
  m68k asm/local.h

amiga-z2ram-fix.patch
  Amiga z2ram

amiga-floppy-fix.patch
  Amiga floppy

atari-floppy-fix.patch
  Atari floppy

m68k-switch_to-fix.patch
  M68k switch_to fix

pcxx-warning-fix.patch
  drivers/char/pcxx.c warning fix

pcnet32-unregister_pci-fix.patch
  pcnet32 needs unregister_pci

hwifs-oops-unregister-fix.patch
  Fix ide unregister vs. driver model

c99-conversions.patch
  c99 struct initialiser conversions

cyc2x-fixes.patch
  cyc2x: sanitize ioremap usage & more

noacpi-option-fix.patch
  Fix 'pci=noacpi' with buggy ACPI BIOSes

h8300-interrupt-fix.patch
  h8300 interrupt problem fix

proc-kallsyms-caching-fix.patch
  /proc/kallsym caching fix

proc-kallsyms-permission-fix.patch
  Fix permissions on /proc/kallsyms

cu3088-string-null-termination-fix.patch
  cu3088 null termination fix

kobject-doc-addition.patch
  Kobject doc addition

vm_enough_memory-speedup.patch
  vm_enough_memory microoptimisation

abi-doc-update.patch
  abi doc update

remove-bio-boot-messages.patch
  bio.c: reduce verbosity at boot

claim-serio-early.patch
  Serio: claim serio early

ni5010-build-fix.patch
  ni5010.c: remove cli/sti

sis190-build-fix.patch
  sis190 doesn't compile with gcc 2.95

nopage-fix.patch
  do_no_page() fix

fix-strange-code-in-bio_add_page.patch
  Fix odd code in bio_add_page

parport_pc-rmmod-oops-fix.patch
  parport_pc rmmod oops fix

reiserfs-writepage-fix.patch
  reiserfs writepage-versus-truncate fix

visws-build-fix.patch
  visws: fix 2.6.0-test4 breakage

cciss-queue-init-fix.patch
  cciss queue initialisation fix

htree-big-endian-fix.patch
  Fix ext3 htree corruption on big-endian platforms

selinux-file-fcntl-fix.patch
  Fix selinux_file_fcntl

selinux-avtab-fix.patch
  Fix SELinux avtab

selinux-format-specifiers-fix.patch
  Fix SELinux format specifiers

selinux-binprm-hooks-rework.patch
  Rework SELinux binprm hooks

ext2-xattr-typo-fix.patch
  Fix typo in #ifdef for ext2 xattr support

bad-inode-ops.patch
  Add more bad_inode operations

kcore-aout-build-fix.patch
  Fix build with CONFIG_KCORE_AOUT

nfs4proc-warnings-fix.patch
  knfsd nfs4 warning fixes

bluetooth-warning-fixes.patch
  Fix bluetooth compile warnings

nopage-rss-accounting-fix.patch
  do_no_page() rss accounting fix

sonypi-update.patch
  sonypi driver update

meye-update.patch
  meye driver update

jbd-stfu.patch
  jbd: remove uninformative printk

proc-pid-maps-32-bit-fix.patch
  Do 32bit addresses in /proc/self/maps if possible

acpi-pci-link-fix.patch
  acpi pci_link fix

rusage-context-switch-counters.patch
  add context switch counters

large-dev_t-01.patch
  large dev_t work - first series (1/12)

large-dev_t-02.patch
  large dev_t work - first series (2/12)

large-dev_t-03.patch
  large dev_t work - first series (3/12)

large-dev_t-04.patch
  large dev_t work - first series (4/12)

large-dev_t-05.patch
  large dev_t work - first series (5/12)

large-dev_t-06.patch
  large dev_t work - first series (6/12)

large-dev_t-07.patch
  large dev_t work - first series (7/12)

large-dev_t-08.patch
  large dev_t work - first series (8/12)

large-dev_t-09.patch
  large dev_t work - first series (9/12)

large-dev_t-10.patch
  large dev_t work - first series (10/12)

large-dev_t-11.patch
  large dev_t work - first series (11/12)

large-dev_t-12.patch
  large dev_t work - first series (12/12)

large-dev_t-12-fix.patch
  large dev_t 12/12 fix

size_t-printk-warning-fixes.patch
  remove size_t-based printk warnings

stallion-build-fix-2.patch
  stallion serial driver cleanup

evdev_ioctl-fix.patch
  evdev_ioctl does not report EV_MSC capabilities

as-no-initial-antic.patch
  AS: don't anticipate against a tasks' initial I/O

mark-devfs-obsolete.patch
  mark devfs obsolete

hch-contacts-update.patch
  hch has moved

h8300-include-update.patch
  h8300 include update

cyclades-isa-fix.patch
  Cyclades ISA serial driver fix

old-module-tools-warning.patch
  kbuild: warn if the user has old modutils

arcnet-printk-fix.patch
  fix arcnet printk parameter types

floppy-cleanup.patch
  floppy driver cleanup

floppy-more-cleanup.patch
  floppy driver: more cleanups

v850-nommu-export-fixes.patch
  v850: Guard some symbol exports with #ifdef CONFIG_MMU

v850-RODATA-fix.patch
  v850: Give v850 its own version of the vmlinux.lds.h RODATA macro

dnotify-use-tgid.patch
  Use tgid rather than pid in dnotify

send_sigio-decl-fix.patch
  Fix a few declarations

ipc-use-tgid.patch
  ipc/sem.c: ->pid to ->tgid changes

voyager-cpumask_t-fix.patch
  make voyager work again after the cpumask_t changes

mtrr-attrib_to_str-consolidation.patch
  mtrr cleanups

ioctl_end-fix.patch
  compat ioctl_table fix

raw-driver-fixes.patch
  raw driver oops fix

ipc_init-shuffle.patch
  ipc_init() uses vmalloc too early

zone-pressure-fixes.patch
  vmscan: zone pressure calculation fix

zone-pressure-simplification.patch
  vmscan: zone pressure simplification and fix

p00001_synaptics-restore-on-close.patch

p00002_psmouse-reset-timeout.patch

p00003_synaptics-multi-button.patch

p00004_synaptics-optional.patch

p00005_synaptics-pass-through.patch

p00006_psmouse-suspend-resume.patch

p00007_synaptics-old-proto.patch

synaptics-mode-set.patch
  Synaptics mode setting

syn-multi-btn-fix.patch
  synaptics multibutton fix

keyboard-resend-fix.patch
  keyboard resend fix

linux-isp-2.patch

linux-isp-2-fix-again.patch
  lost feral fix

feral-bounce-fix.patch
  Feral driver - highmem issues

feral-bounce-fix-2.patch
  Feral driver bouncing fix

list_del-debug.patch
  list_del debug check

print-build-options-on-oops.patch
  print a few config options on oops

show_task-free-stack-fix.patch
  show_task() fix and cleanup

put_task_struct-debug.patch

ia32-mknod64.patch
  mknod64 for ia32

ext2-64-bit-special-inodes.patch
  ext2: support for 64-bit device nodes

ext3-64-bit-special-inodes.patch
  ext3: support for 64-bit device nodes

64-bit-dev_t-kdev_t.patch
  64-bit dev_t and kdev_t

64-bit-dev_t-other-archs.patch
  enable 64-bit dev_t for other archs

mknod64-64-bit-fix.patch
  dev_t: fix mknod for 64-bit archs

ustat64.patch
  ustat64

ppc-64-bit-stat.patch
  fix ppc stat.h for 64-bit dev_t

64-bit-dev_t-init_rd-fixes.patch
  initrd fixes for 64-bit dev_t

arch-dev_t-stat-fixes.patch
  Fix all asm-*/stat.h dev_t instances

oops-dump-preceding-code.patch
  i386 oops output: dump preceding code

lockmeter.patch

sparc64-lockmeter-fix.patch

sparc64-lockmeter-fix-2.patch
  Fix lockmeter on sparc64

printk-oops-mangle-fix.patch
  disentangle printk's whilst oopsing on SMP

20-odirect_enable.patch

21-odirect_cruft.patch

22-read_proc.patch

23-write_proc.patch

24-commit_proc.patch

25-odirect.patch

nfs-O_DIRECT-always-enabled.patch
  Force CONFIG_NFS_DIRECTIO

sched-CAN_MIGRATE_TASK-fix.patch
  CAN_MIGRATE fix

sched-balance-fix-2.6.0-test3-mm3-A0.patch
  sched-balance-fix-2.6.0-test3-mm3-A0

sched-2.6.0-test2-mm2-A3.patch
  sched-2.6.0-test2-mm2-A3

ppc-sched_clock.patch

sparc64_sched_clock.patch

x86_64-sched_clock.patch
  Add sched_clock for x86-64

sched-warning-fix.patch

sched-balance-tuning.patch
  CPU scheduler balancing fix

sched-no-tsc-on-numa.patch
  Subject: Re: Fw: Re: 2.6.0-test2-mm3

o12.2int.patch
  O12.2int for interactivity

o12.3.patch
  O12.3 for interactivity

o13int.patch
  O13int for interactivity

o13.1int.patch
  O13.1int

o14int.patch
  O14int

o14int-div-fix.patch
  o14int 64-bit-divide fix

o14.1int.patch
  O14.1int

o15int.patch
  O15int for interactivity

o16int.patch
  From: Con Kolivas <kernel@kolivas.org>
  Subject: [PATCH] O16int for interactivity

o16.1int.patch
  O16.1int for interactivity

o16.2int.patch
  O16.2int

o16.3int.patch
  O16.3int

o18int.patch
  O18int

o18.1int.patch
  O18.1int

sched-cpu-migration-fix.patch
  sched: task migration fix

4g-2.6.0-test2-mm2-A5.patch
  4G/4G split patch
  4G/4G: remove debug code
  4g4g: pmd fix
  4g/4g: fixes from Bill
  4g4g: fpu emulation fix
  4g/4g usercopy atomicity fix
  4G/4G: remove debug code
  4g4g: pmd fix
  4g/4g: fixes from Bill
  4g4g: fpu emulation fix
  4g/4g usercopy atomicity fix

4g4g-slab-__get_user-fix.patch
  4g4g: fix __get_user in slab

4g4g-vmlinux-update-got-lost.patch

4g4g-do_page_fault-cleanup.patch
  4G/4G: remove debug code

4g4g-cleanups.patch

kgdb-4g4g-fix-2.patch

4g4g-config-fix.patch

4g4g-pmd-fix.patch
  4g4g: pmd fix

4g4g-wli-fixes.patch
  4g/4g: fixes from Bill

4g4g-fpu-fix.patch
  4g4g: fpu emulation fix

4g4g-show_registers-fix.patch
  4g4g: show_registers() fix

4g4g-pin_page-atomicity-fix.patch
  4g/4g usercopy atomicity fix

4g4g-remove-touch_all_pages.patch

4g4g-debug-flags-fix.patch
  4g4g: debug flags fix

4g4g-TI_task-fix.patch
  4g4g: Fix wrong asm-offsets entry

cyclone-fixmap-fix.patch
  cyclone time fixmap fix

ppc-fixes.patch
  make mm4 compile on ppc

aic7xxx_old-oops-fix.patch

aio-01-retry.patch
  AIO: Core retry infrastructure

io_submit_one-EINVAL-fix.patch
  Fix aio process hang on EINVAL

aio-02-lockpage_wq.patch
  AIO: Async page wait

aio-03-fs_read.patch
  AIO: Filesystem aio read

aio-04-buffer_wq.patch
  AIO: Async buffer wait

aio-05-fs_write.patch
  AIO: Filesystem aio write

aio-05-fs_write-fix.patch

aio-06-bread_wq.patch
  AIO: Async block read

aio-06-bread_wq-fix.patch

aio-07-ext2getblk_wq.patch
  AIO: Async get block for ext2

O_SYNC-speedup-2.patch
  speed up O_SYNC writes

aio-09-o_sync.patch
  aio O_SYNC

aio-10-BUG-fix.patch
  AIO: fix a BUG

aio-11-workqueue-flush.patch
  AIO: flush workqueues before destroying ioctx'es

aio-12-readahead.patch
  AIO: readahead fixes

aio-dio-no-readahead.patch
  aio O_DIRECT no readahead

lock_buffer_wq-fix.patch
  lock_buffer_wq fix

unuse_mm-locked.patch
  AIO: hold the context lock across unuse_mm

aio-take-task_lock.patch
  From: Suparna Bhattacharya <suparna@in.ibm.com>
  Subject: Re: 2.5.72-mm1 - Under heavy testing with AIO,.. vmstat seems to blow the kernel

aio-O_SYNC-fix.patch
  Unify o_sync changes for aio and regular writes

aio-O_SYNC-fix-missing-bit.patch
  aio-O_SYNC-fix bits got lost

O_SYNC-speedup-nolock-fix.patch

aio-writev-nsegs-fix.patch
  aio: writev nr_segs fix

aio-remove-lseek-triggerable-BUG_ONs.patch

aio-readahead-rework.patch
  Unified page range readahead for aio and regular reads

aio-readahead-speedup.patch
  Readahead issues and AIO read speedup

aio-osync-fix-2.patch
  More AIO O_SYNC related fixes

Re: 2.6.0-test4-mm3

[Andrew Morton]

Andrew Morton <akpm@osdl.org> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test4/2.6.0-test4-mm3/

That rollup is missing some AIO patches.  And master.kernel.org has
conveniently died.

Please use

http://www.zip.com.au/~akpm/linux/patches/2.6.0-test4-mm3-1.gz

Re: 2.6.0-test4-mm3

[Ed Sweetman]

Andrew Morton wrote:
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test4/2.6.0-test4-mm3/
> 
> 
> . Lots of small fixes.


It seems that since test3-mm2 ...possibly mm3, my kernels just hang 
after loading the input driver for the pc speaker.  Now directly after 
this on test3-mm1 serio loads.
  serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1

I'm guessing this is where the later kernels are hanging.
I checked and i dont see any serio/input patches since mm1 in test3 but 
every mm kernel i've tried since mm3 hangs at the same point where as 
mm1 does not.  All have the same config.  I'm using acpi as well.  This 
is a via amd board.  I dont wanna send a general email with all kinds of 
extra info (.config and such) unless someone is interested in the 
problem and needs it.

Re: 2.6.0-test4-mm3

[Andrew Morton]

Ed Sweetman <ed.sweetman@wmich.edu> wrote:
>
> Andrew Morton wrote:
> > 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test4/2.6.0-test4-mm3/
> > 
> > 
> > . Lots of small fixes.
> 
> 
> It seems that since test3-mm2 ...possibly mm3, my kernels just hang 
> after loading the input driver for the pc speaker.  Now directly after 
> this on test3-mm1 serio loads.
>   serio: i8042 AUX port at 0x60,0x64 irq 12
> input: AT Set 2 keyboard on isa0060/serio0
> serio: i8042 KBD port at 0x60,0x64 irq 1
> 
> I'm guessing this is where the later kernels are hanging.
> I checked and i dont see any serio/input patches since mm1 in test3 but 
> every mm kernel i've tried since mm3 hangs at the same point where as 
> mm1 does not.  All have the same config.  I'm using acpi as well.  This 
> is a via amd board.  I dont wanna send a general email with all kinds of 
> extra info (.config and such) unless someone is interested in the 
> problem and needs it.

The only patch I can see in there is syn-multi-btn-fix.patch in test3-mm3,
which seems unlikely.

Have you tested 2.6.0-test4?  If that also fails then I'd be suspecting the
ACPI changes; there seem to be a few new problems in that area lately.

Re: 2.6.0-test4-mm3

[Felipe Alfaro Solana]

On Fri, 2003-08-29 at 17:42, Ed Sweetman wrote:
> 
> It seems that since test3-mm2 ...possibly mm3, my kernels just hang 
> after loading the input driver for the pc speaker.  Now directly after 
> this on test3-mm1 serio loads.
>   serio: i8042 AUX port at 0x60,0x64 irq 12
> input: AT Set 2 keyboard on isa0060/serio0
> serio: i8042 KBD port at 0x60,0x64 irq 1

Please, take a look at
http://bugzilla.kernel.org/show_bug.cgi?id=1123

It's a problem with ACPI interrupt routing, it seems.

Re: 2.6.0-test4-mm3

[Mike Fedyk]

Hi,

I have another oops for you with 2.6.0-test4-mm3-1 and ide-scsi.  I've been
using it for the last few days straight and I tried copying files from my
ide cdrom using ide-scsi.  cp segfaults, I get this oops, and X hangs.
Syslog was running long enough to capture it, and a sysrq SUB saved it to
disk.

I will be trying a newer kernel soon.  Has this been caught and fixed already?

Sep 10 11:23:27 mis-mike-wstn kernel: sr0: scsi-1 drive
Sep 10 11:23:27 mis-mike-wstn kernel: Uniform CD-ROM driver Revision: 3.12
Sep 10 11:23:27 mis-mike-wstn kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Sep 10 11:24:45 mis-mike-wstn kernel: nfs: server fs not responding, still trying
Sep 10 11:24:47 mis-mike-wstn last message repeated 2 times
Sep 10 11:24:47 mis-mike-wstn kernel: nfs: server fs OK
Sep 10 11:24:47 mis-mike-wstn last message repeated 2 times
Sep 10 11:29:39 mis-mike-wstn kernel: Unable to handle kernel paging request at virtual address 6b6b6b7b
Sep 10 11:29:39 mis-mike-wstn kernel:  printing eip:
Sep 10 11:29:39 mis-mike-wstn kernel: d48894dc
Sep 10 11:29:39 mis-mike-wstn kernel: *pde = 00000000
Sep 10 11:29:39 mis-mike-wstn kernel: Oops: 0000 [#1]
Sep 10 11:29:39 mis-mike-wstn kernel: PREEMPT SMP 
Sep 10 11:29:39 mis-mike-wstn kernel: CPU:    0
Sep 10 11:29:39 mis-mike-wstn kernel: EIP:    0060:[_end+339697948/1068932160]    Not tainted VLI
Sep 10 11:29:39 mis-mike-wstn kernel: EFLAGS: 00010002
Sep 10 11:29:39 mis-mike-wstn kernel: EIP is at idescsi_queue+0x59c/0x614 [ide_scsi]
Sep 10 11:29:39 mis-mike-wstn kernel: eax: 6b6b6b6b   ebx: c2050000   ecx: c2050000   edx: d3357864
Sep 10 11:29:39 mis-mike-wstn kernel: esi: d3357864   edi: c410629c   ebp: c2051d18   esp: c2051ce0
Sep 10 11:29:39 mis-mike-wstn kernel: ds: 007b   es: 007b   ss: 0068
Sep 10 11:29:39 mis-mike-wstn kernel: Process cp (pid: 29140, threadinfo=c2050000 task=ca90e000)
Sep 10 11:29:39 mis-mike-wstn kernel: Stack: d3a94540 00000293 d3a9451c d3a9451c c9e92c00 d33578b8 c461c18c c13cdca0 
Sep 10 11:29:39 mis-mike-wstn kernel:        ffffffff 00000000 d3a946d8 c9e92c00 c410629c c0487b58 c2051d38 c026cf08 
Sep 10 11:29:39 mis-mike-wstn kernel:        d3357864 c026d0d0 c2050000 d3357864 d3680304 00000000 c2051d58 c02724dd 
Sep 10 11:29:39 mis-mike-wstn kernel: Call Trace:
Sep 10 11:29:39 mis-mike-wstn kernel:  [scsi_dispatch_cmd+556/676] scsi_dispatch_cmd+0x22c/0x2a4
Sep 10 11:29:39 mis-mike-wstn kernel:  [scsi_done+0/108] scsi_done+0x0/0x6c
Sep 10 11:29:39 mis-mike-wstn kernel:  [scsi_request_fn+713/1036] scsi_request_fn+0x2c9/0x40c
Sep 10 11:29:39 mis-mike-wstn kernel:  [generic_unplug_device+132/216] generic_unplug_device+0x84/0xd8
Sep 10 11:29:39 mis-mike-wstn kernel:  [blk_run_queues+270/424] blk_run_queues+0x10e/0x1a8
Sep 10 11:29:39 mis-mike-wstn kernel:  [block_sync_page+8/16] block_sync_page+0x8/0x10
Sep 10 11:29:39 mis-mike-wstn kernel:  [wait_on_page_bit_wq+169/228] wait_on_page_bit_wq+0xa9/0xe4
Sep 10 11:29:39 mis-mike-wstn kernel:  [autoremove_wake_function+0/64] autoremove_wake_function+0x0/0x40
Sep 10 11:29:39 mis-mike-wstn kernel:  [autoremove_wake_function+0/64] autoremove_wake_function+0x0/0x40
Sep 10 11:29:39 mis-mike-wstn kernel:  [do_generic_mapping_read+770/1156] do_generic_mapping_read+0x302/0x484
Sep 10 11:29:39 mis-mike-wstn kernel:  [__generic_file_aio_read+478/508] __generic_file_aio_read+0x1de/0x1fc
Sep 10 11:29:39 mis-mike-wstn kernel:  [file_read_actor+0/224] file_read_actor+0x0/0xe0
Sep 10 11:29:39 mis-mike-wstn kernel:  [generic_file_read+171/200] generic_file_read+0xab/0xc8
Sep 10 11:29:39 mis-mike-wstn kernel:  [_end+341016069/1068932160] rpcauth_lookupcred+0x75/0x80 [sunrpc]
Sep 10 11:29:39 mis-mike-wstn kernel:  [cp_new_stat64+224/248] cp_new_stat64+0xe0/0xf8
Sep 10 11:29:39 mis-mike-wstn kernel:  [autoremove_wake_function+0/64] autoremove_wake_function+0x0/0x40
Sep 10 11:29:39 mis-mike-wstn kernel:  [sys_fstat64+37/44] sys_fstat64+0x25/0x2c
Sep 10 11:29:39 mis-mike-wstn kernel:  [vfs_read+183/240] vfs_read+0xb7/0xf0
Sep 10 11:29:39 mis-mike-wstn kernel:  [sys_read+48/80] sys_read+0x30/0x50
Sep 10 11:29:39 mis-mike-wstn kernel:  [syscall_call+7/11] syscall_call+0x7/0xb
Sep 10 11:29:39 mis-mike-wstn kernel:  [ip_mc_source+583/892] ip_mc_source+0x247/0x37c
Sep 10 11:29:39 mis-mike-wstn kernel: 
Sep 10 11:29:39 mis-mike-wstn kernel: Code: 08 00 00 00 74 09 e8 a8 6e 89 eb 8d 74 26 00 6a 04 8b 7d f8 57 8b 45 fc 50 e8 01 39 9d eb 83 c4 0c fa ff 43 14 8b 55 08 8b 42 04 <8b> 40 10 8b 58 2c 81 7b 04 ad 4e ad de 74 17 68 e2 94 88 d4 68 
Sep 10 11:29:39 mis-mike-wstn kernel:  <6>note: cp[29140] exited with preempt_count 1
Sep 10 11:29:39 mis-mike-wstn kernel: Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Sep 10 11:29:39 mis-mike-wstn kernel: Call Trace:
Sep 10 11:29:39 mis-mike-wstn kernel:  [__might_sleep+99/104] __might_sleep+0x63/0x68
Sep 10 11:29:39 mis-mike-wstn kernel:  [remove_shared_vm_struct+43/132] remove_shared_vm_struct+0x2b/0x84
Sep 10 11:29:39 mis-mike-wstn kernel:  [exit_mmap+485/552] exit_mmap+0x1e5/0x228
Sep 10 11:29:39 mis-mike-wstn kernel:  [mmput+174/204] mmput+0xae/0xcc
Sep 10 11:29:39 mis-mike-wstn kernel:  [do_exit+498/1332] do_exit+0x1f2/0x534
Sep 10 11:29:39 mis-mike-wstn kernel:  [die+351/352] die+0x15f/0x160
Sep 10 11:29:39 mis-mike-wstn kernel:  [do_page_fault+733/1045] do_page_fault+0x2dd/0x415
Sep 10 11:29:39 mis-mike-wstn kernel:  [_end+339697948/1068932160] idescsi_queue+0x59c/0x614 [ide_scsi]
Sep 10 11:29:39 mis-mike-wstn kernel:  [do_page_fault+0/1045] do_page_fault+0x0/0x415
Sep 10 11:29:40 mis-mike-wstn kernel:  [recalc_task_prio+377/392] recalc_task_prio+0x179/0x188
Sep 10 11:29:40 mis-mike-wstn kernel:  [schedule+1404/1760] schedule+0x57c/0x6e0
Sep 10 11:29:40 mis-mike-wstn kernel:  [preempt_schedule+43/72] preempt_schedule+0x2b/0x48
Sep 10 11:29:40 mis-mike-wstn kernel:  [ide_do_drive_cmd+354/399] ide_do_drive_cmd+0x162/0x18f
Sep 10 11:29:40 mis-mike-wstn kernel:  [error_code+47/64] error_code+0x2f/0x40
Sep 10 11:29:40 mis-mike-wstn kernel:  [_end+339697948/1068932160] idescsi_queue+0x59c/0x614 [ide_scsi]
Sep 10 11:29:40 mis-mike-wstn kernel:  [scsi_dispatch_cmd+556/676] scsi_dispatch_cmd+0x22c/0x2a4
Sep 10 11:29:40 mis-mike-wstn kernel:  [scsi_done+0/108] scsi_done+0x0/0x6c
Sep 10 11:29:40 mis-mike-wstn kernel:  [scsi_request_fn+713/1036] scsi_request_fn+0x2c9/0x40c
Sep 10 11:29:40 mis-mike-wstn kernel:  [generic_unplug_device+132/216] generic_unplug_device+0x84/0xd8
Sep 10 11:29:40 mis-mike-wstn kernel:  [blk_run_queues+270/424] blk_run_queues+0x10e/0x1a8
Sep 10 11:29:40 mis-mike-wstn kernel:  [block_sync_page+8/16] block_sync_page+0x8/0x10
Sep 10 11:29:40 mis-mike-wstn kernel:  [wait_on_page_bit_wq+169/228] wait_on_page_bit_wq+0xa9/0xe4
Sep 10 11:29:40 mis-mike-wstn kernel:  [autoremove_wake_function+0/64] autoremove_wake_function+0x0/0x40
Sep 10 11:29:40 mis-mike-wstn kernel:  [autoremove_wake_function+0/64] autoremove_wake_function+0x0/0x40
Sep 10 11:29:40 mis-mike-wstn kernel:  [do_generic_mapping_read+770/1156] do_generic_mapping_read+0x302/0x484
Sep 10 11:29:40 mis-mike-wstn kernel:  [__generic_file_aio_read+478/508] __generic_file_aio_read+0x1de/0x1fc
Sep 10 11:29:40 mis-mike-wstn kernel:  [file_read_actor+0/224] file_read_actor+0x0/0xe0
Sep 10 11:29:40 mis-mike-wstn kernel:  [generic_file_read+171/200] generic_file_read+0xab/0xc8
Sep 10 11:29:40 mis-mike-wstn kernel:  [_end+341016069/1068932160] rpcauth_lookupcred+0x75/0x80 [sunrpc]
Sep 10 11:29:40 mis-mike-wstn kernel:  [cp_new_stat64+224/248] cp_new_stat64+0xe0/0xf8
Sep 10 11:29:40 mis-mike-wstn kernel:  [autoremove_wake_function+0/64] autoremove_wake_function+0x0/0x40
Sep 10 11:29:40 mis-mike-wstn kernel:  [sys_fstat64+37/44] sys_fstat64+0x25/0x2c
Sep 10 11:29:40 mis-mike-wstn kernel:  [vfs_read+183/240] vfs_read+0xb7/0xf0
Sep 10 11:29:40 mis-mike-wstn kernel:  [sys_read+48/80] sys_read+0x30/0x50
Sep 10 11:29:40 mis-mike-wstn kernel:  [syscall_call+7/11] syscall_call+0x7/0xb
Sep 10 11:29:40 mis-mike-wstn kernel:  [ip_mc_source+583/892] ip_mc_source+0x247/0x37c