Infinite interrupt loop, INTSTAT = 0

Infinite interrupt loop, INTSTAT = 0

[Olivier Galibert]

I'm having identical problems with a pair of Fibrenetix VP-1252-U4
plugged on:
- Dual Xeon 32 bits with a mobo-integrated:
    03:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10)
    03:02.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10)
    and a 2.6.11-1.14_FC3.smp kernel

- Dual Xeon 64 bits with a mobo-integrated:
    02:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10)
    02:02.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10)
    and a 2.6.13.2 kernel (native 64bits)


It seems not to happen on a Dual Xeon 32 with a pci(x?) card:
    01:02.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)


The error I get is:

Sep 28 15:26:13 m82 kernel: scsi1:0:0:0: Attempting to abort cmd ffff8100bfe3e300: 0x28 0x0 0x0 0x50 0x0 0x3f 0x0 0x0 0x8 0x0
Sep 28 15:26:13 m82 kernel: Infinite interrupt loop, INTSTAT = 0scsi1: At time of recovery, card was not paused
Sep 28 15:26:13 m82 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Sep 28 15:26:13 m82 kernel: scsi1: Dumping Card State at program address 0x26 Mode 0x33
Sep 28 15:26:13 m82 kernel: Card was paused
Sep 28 15:26:13 m82 kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
Sep 28 15:26:13 m82 kernel: DFFSTAT[0x33] SCSISIGI[0x24] SCSIPHASE[0x0] SCSIBUS[0x0] 
Sep 28 15:26:13 m82 kernel: LASTPHASE[0x1] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] 
Sep 28 15:26:13 m82 kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x10] 
Sep 28 15:26:13 m82 kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
Sep 28 15:26:13 m82 kernel: SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80] 
Sep 28 15:26:13 m82 kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x40] 
Sep 28 15:26:13 m82 kernel: 
Sep 28 15:26:13 m82 kernel: SCB Count = 4 CMDS_PENDING = 3 LASTSCB 0x1 CURRSCB 0x1 NEXTSCB 0xff40
Sep 28 15:26:13 m82 kernel: qinstart = 119 qinfifonext = 119
Sep 28 15:26:13 m82 kernel: QINFIFO:
Sep 28 15:26:13 m82 kernel: WAITING_TID_QUEUES:
Sep 28 15:26:13 m82 kernel: Pending list:
Sep 28 15:26:13 m82 kernel:   2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 15:26:13 m82 kernel:   3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 15:26:13 m82 kernel:   0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 15:26:13 m82 kernel: Total 3
Sep 28 15:26:13 m82 kernel: Kernel Free SCB list: 1 
Sep 28 15:26:13 m82 kernel: Sequencer Complete DMA-inprog list: 
Sep 28 15:26:14 m82 kernel: Sequencer Complete list: 
Sep 28 15:26:14 m82 kernel: Sequencer DMA-Up and Complete list: 
Sep 28 15:26:14 m82 kernel: 
Sep 28 15:26:14 m82 kernel: scsi1: FIFO0 Free, LONGJMP == 0x8252, SCB 0x1
Sep 28 15:26:14 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 15:26:14 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 15:26:14 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 15:26:14 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 15:26:14 m82 kernel: scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
Sep 28 15:26:14 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 15:26:14 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 15:26:14 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 15:26:14 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 15:26:14 m82 kernel: LQIN: 0x8 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
Sep 28 15:26:14 m82 kernel: scsi1: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
Sep 28 15:26:14 m82 kernel: scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
Sep 28 15:26:14 m82 kernel: SIMODE0[0xc] 
Sep 28 15:26:14 m82 kernel: CCSCBCTL[0x4] 
Sep 28 15:26:14 m82 kernel: scsi1: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102
Sep 28 15:26:14 m82 kernel: scsi1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff01
Sep 28 15:26:14 m82 kernel: CDB 0 0 0 0 0 0
Sep 28 15:26:14 m82 kernel: STACK: 0x12 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Sep 28 15:26:14 m82 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Sep 28 15:26:14 m82 kernel: DevQ(0:0:0): 0 waiting
Sep 28 15:26:14 m82 kernel: DevQ(0:0:1): 0 waiting
Sep 28 15:26:14 m82 kernel: (scsi1:A:0:0): Device is disconnected, re-queuing SCB
Sep 28 15:26:14 m82 kernel: Recovery code sleeping


The Fibrenetix appears as a pair of 2Tb disks at 0/0/0 and 0/0/1.
There is nothing else on the same scsi bus (there are things on scsi0
though).

What should I try ?

  OG.

Re: Infinite interrupt loop, INTSTAT = 0

[James Bottomley]

On Wed, 2005-09-28 at 15:45 +0200, Olivier Galibert wrote:
> Sep 28 15:26:13 m82 kernel: scsi1:0:0:0: Attempting to abort cmd ffff8100bfe3e300: 0x28 0x0 0x0 0x50 0x0 0x3f 0x0 0x0 0x8 0x0
> Sep 28 15:26:13 m82 kernel: Infinite interrupt loop, INTSTAT = 0scsi1: At time of recovery, card was not paused
> Sep 28 15:26:13 m82 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<

What was it doing before this?  i.e. what were all the messages from the
card.  The message happens when the aic driver is unable to clear its
pending workqueue after it suspends ... which is part of error recovery.
So, what error was it trying to recover from?

By the way, your AIC-7892 is a different driver.

James

Re: Infinite interrupt loop, INTSTAT = 0

[Olivier Galibert]

On Wed, Sep 28, 2005 at 10:05:08AM -0500, James Bottomley wrote:
> What was it doing before this?  i.e. what were all the messages from the
> card.  The message happens when the aic driver is unable to clear its
> pending workqueue after it suspends ... which is part of error recovery.
> So, what error was it trying to recover from?

Good question.  Here is a complete dmesg starting at the mount
/dev/sdb1 /ritel1 which crashes the system eventually (I did a dmesg -c
just before doing the mount):

ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
scsi1:0:0:0: Attempting to abort cmd ffff8101b1cdf880: 0x28 0x0 0x0 0xbc 0x0 0x3f 0x0 0x0 0x8 0x0
Infinite interrupt loop, INTSTAT = 0scsi1: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x5 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
DFFSTAT[0x33] SCSISIGI[0x24] SCSIPHASE[0x0] SCSIBUS[0x0] 
LASTPHASE[0x1] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] 
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x10] 
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80] 
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x40] 

SCB Count = 4 CMDS_PENDING = 4 LASTSCB 0x1 CURRSCB 0x1 NEXTSCB 0xff00
qinstart = 146 qinfifonext = 146
QINFIFO:
WAITING_TID_QUEUES:
       0 ( 0x1 )
Pending list:
  1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
  2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
  3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
  0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Total 4
Kernel Free SCB list: 
Sequencer Complete DMA-inprog list: 
Sequencer Complete list: 
Sequencer DMA-Up and Complete list: 

scsi1: FIFO0 Free, LONGJMP == 0x8252, SCB 0x1
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
LQIN: 0x8 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
scsi1: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc] 
CCSCBCTL[0x4] 
scsi1: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102
scsi1: SCBPTR == 0x1, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff04
CDB 28 0 0 c8 0 3f
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
DevQ(0:0:0): 0 waiting
DevQ(0:0:1): 0 waiting
scsi1:0:0:0: Cmd aborted from QINFIFO

Abort on some timeout?

  OG.

Re: Infinite interrupt loop, INTSTAT = 0

[James Bottomley]

On Wed, 2005-09-28 at 18:07 +0200, Olivier Galibert wrote:
> scsi1:0:0:0: Attempting to abort cmd ffff8101b1cdf880: 0x28 0x0 0x0
> 0xbc 0x0 0x3f 0x0 0x0 0x8 0x0

Hmm, that message doesn't appear in the current kernel driver.

Is this a non-standard kernel or non-standard aic79xx driver?

James

Re: Infinite interrupt loop, INTSTAT = 0

[Olivier Galibert]

On Wed, Sep 28, 2005 at 11:24:46AM -0500, James Bottomley wrote:
> On Wed, 2005-09-28 at 18:07 +0200, Olivier Galibert wrote:
> > scsi1:0:0:0: Attempting to abort cmd ffff8101b1cdf880: 0x28 0x0 0x0
> > 0xbc 0x0 0x3f 0x0 0x0 0x8 0x0
> 
> Hmm, that message doesn't appear in the current kernel driver.
> 
> Is this a non-standard kernel or non-standard aic79xx driver?

Hmmm, indeed, a leftover from when I was trying to debug some things
(a message in ahd_linux_abort).  Lemme recompile a perfectly vanilla
2.6.13.2.

  OG.

Re: Infinite interrupt loop, INTSTAT = 0

[Olivier Galibert]

On Wed, Sep 28, 2005 at 11:24:46AM -0500, James Bottomley wrote:
> On Wed, 2005-09-28 at 18:07 +0200, Olivier Galibert wrote:
> > scsi1:0:0:0: Attempting to abort cmd ffff8101b1cdf880: 0x28 0x0 0x0
> > 0xbc 0x0 0x3f 0x0 0x0 0x8 0x0
> 
> Hmm, that message doesn't appear in the current kernel driver.
> 
> Is this a non-standard kernel or non-standard aic79xx driver?

Just reproduced the exact same message with a vanilla 2.6.13.2.
Checking the just-untarred sources, it _is_ in aix79xx_osm.c, in
ahd_linux_abort.  You must have typoed "Attempting" in your grep :-)

Want be to try to BUG() it or something to get a stack trace?  The
crash happens a handful of seconds after the card dumping, time enough
for a well-placed dmesg in an xterm.

Incidentally, how can one get a backtrace without crashing the kernel
in the operation?

  OG.

Re: Infinite interrupt loop, INTSTAT = 0

[Randy.Dunlap]

On Wed, 28 Sep 2005, Olivier Galibert wrote:

> On Wed, Sep 28, 2005 at 11:24:46AM -0500, James Bottomley wrote:
> > On Wed, 2005-09-28 at 18:07 +0200, Olivier Galibert wrote:
> > > scsi1:0:0:0: Attempting to abort cmd ffff8101b1cdf880: 0x28 0x0 0x0
> > > 0xbc 0x0 0x3f 0x0 0x0 0x8 0x0
> >
> > Hmm, that message doesn't appear in the current kernel driver.
> >
> > Is this a non-standard kernel or non-standard aic79xx driver?
>
> Just reproduced the exact same message with a vanilla 2.6.13.2.
> Checking the just-untarred sources, it _is_ in aix79xx_osm.c, in
> ahd_linux_abort.  You must have typoed "Attempting" in your grep :-)
>
> Want be to try to BUG() it or something to get a stack trace?  The
> crash happens a handful of seconds after the card dumping, time enough
> for a well-placed dmesg in an xterm.
>
> Incidentally, how can one get a backtrace without crashing the kernel
> in the operation?

call dump_stack();

-- 
~Randy

Re: Infinite interrupt loop, INTSTAT = 0

[Arjan van de Ven]

On Wed, 2005-09-28 at 19:10 +0200, Olivier Galibert wrote:
> On Wed, Sep 28, 2005 at 11:24:46AM -0500, James Bottomley wrote:
> > On Wed, 2005-09-28 at 18:07 +0200, Olivier Galibert wrote:
> > > scsi1:0:0:0: Attempting to abort cmd ffff8101b1cdf880: 0x28 0x0 0x0
> > > 0xbc 0x0 0x3f 0x0 0x0 0x8 0x0
> > 
> > Hmm, that message doesn't appear in the current kernel driver.
> > 
> > Is this a non-standard kernel or non-standard aic79xx driver?
> 
> Just reproduced the exact same message with a vanilla 2.6.13.2.
> Checking the just-untarred sources, it _is_ in aix79xx_osm.c, in
> ahd_linux_abort.  You must have typoed "Attempting" in your grep :-)
> 
> Want be to try to BUG() it or something to get a stack trace?  The
> crash happens a handful of seconds after the card dumping, time enough
> for a well-placed dmesg in an xterm.
> 
> Incidentally, how can one get a backtrace without crashing the kernel
> in the operation?

WARN_ON(1)

Re: Infinite interrupt loop, INTSTAT = 0

[James Bottomley]

On Wed, 2005-09-28 at 19:10 +0200, Olivier Galibert wrote:
> On Wed, Sep 28, 2005 at 11:24:46AM -0500, James Bottomley wrote:
> > On Wed, 2005-09-28 at 18:07 +0200, Olivier Galibert wrote:
> > > scsi1:0:0:0: Attempting to abort cmd ffff8101b1cdf880: 0x28 0x0 0x0
> > > 0xbc 0x0 0x3f 0x0 0x0 0x8 0x0
> > 
> > Hmm, that message doesn't appear in the current kernel driver.
> > 
> > Is this a non-standard kernel or non-standard aic79xx driver?
> 
> Just reproduced the exact same message with a vanilla 2.6.13.2.
> Checking the just-untarred sources, it _is_ in aix79xx_osm.c, in
> ahd_linux_abort.  You must have typoed "Attempting" in your grep :-)

Oh .. apparently that message got removed between 2.6.13 and current git
head.

Is there any chance you could try this with the latest git snapshot and
post all the messages from the time the aic79xx is detected to the time
this message appears ... what I'm trying to ascertain is if anything
went wrong in negotiating with the device (2.6.13 unfortunately is a bit
terse on the negotiation messages ... git head will be slightly more
verbose).

Thanks,

James

Re: Infinite interrupt loop, INTSTAT = 0

[Olivier Galibert]

On Wed, Sep 28, 2005 at 12:51:49PM -0500, James Bottomley wrote:
> On Wed, 2005-09-28 at 19:10 +0200, Olivier Galibert wrote:
> > On Wed, Sep 28, 2005 at 11:24:46AM -0500, James Bottomley wrote:
> > > On Wed, 2005-09-28 at 18:07 +0200, Olivier Galibert wrote:
> > > > scsi1:0:0:0: Attempting to abort cmd ffff8101b1cdf880: 0x28 0x0 0x0
> > > > 0xbc 0x0 0x3f 0x0 0x0 0x8 0x0
> > > 
> > > Hmm, that message doesn't appear in the current kernel driver.
> > > 
> > > Is this a non-standard kernel or non-standard aic79xx driver?
> > 
> > Just reproduced the exact same message with a vanilla 2.6.13.2.
> > Checking the just-untarred sources, it _is_ in aix79xx_osm.c, in
> > ahd_linux_abort.  You must have typoed "Attempting" in your grep :-)
> 
> Oh .. apparently that message got removed between 2.6.13 and current git
> head.
> 
> Is there any chance you could try this with the latest git snapshot and
> post all the messages from the time the aic79xx is detected to the time
> this message appears ... what I'm trying to ascertain is if anything
> went wrong in negotiating with the device (2.6.13 unfortunately is a bit
> terse on the negotiation messages ... git head will be slightly more
> verbose).

Ok, for git HEAD 95001ee9256df846e374f116c92ca8e0beec1527.  The system
has the nice idea not to crash at the end, so I can fish everything
out of /var/log/messages (kernel messages only):

Sep 28 20:21:14 m82 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Sep 28 20:21:14 m82 kernel: Bootdata ok (command line is ro root=/dev/sda1 rhgb)
Sep 28 20:21:14 m82 kernel: Linux version 2.6.14-rc2-g95001ee9 (galibert@m82.limsi.fr) (gcc version 3.4.3 20050227 (Red Hat 3.4.3-22.fc3)) #1 SMP Wed Sep 28 20:12:23 CEST 2005
Sep 28 20:21:14 m82 kernel: BIOS-provided physical RAM map:
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 0000000000100000 - 00000000bff70000 (usable)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 00000000bff70000 - 00000000bff78000 (ACPI data)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 00000000bff78000 - 00000000bff80000 (ACPI NVS)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
Sep 28 20:21:14 m82 kernel:  BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
Sep 28 20:21:14 m82 kernel: No NUMA configuration found
Sep 28 20:21:14 m82 kernel: Faking a node at 0000000000000000-00000001c0000000
Sep 28 20:21:14 m82 kernel: Bootmem setup node 0 0000000000000000-00000001c0000000
Sep 28 20:21:14 m82 kernel: ACPI: PM-Timer IO Port: 0x1008
Sep 28 20:21:14 m82 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep 28 20:21:14 m82 kernel: Processor #0 15:4 APIC version 20
Sep 28 20:21:14 m82 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Sep 28 20:21:14 m82 kernel: Processor #6 15:4 APIC version 20
Sep 28 20:21:14 m82 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep 28 20:21:14 m82 kernel: Processor #1 15:4 APIC version 20
Sep 28 20:21:14 m82 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Sep 28 20:21:14 m82 kernel: Processor #7 15:4 APIC version 20
Sep 28 20:21:14 m82 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Sep 28 20:21:14 m82 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep 28 20:21:14 m82 kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep 28 20:21:14 m82 kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Sep 28 20:21:15 m82 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Sep 28 20:21:15 m82 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Sep 28 20:21:15 m82 kernel: ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
Sep 28 20:21:15 m82 kernel: IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
Sep 28 20:21:15 m82 kernel: ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
Sep 28 20:21:15 m82 kernel: IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
Sep 28 20:21:15 m82 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Sep 28 20:21:15 m82 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 28 20:21:15 m82 kernel: Setting APIC routing to flat
Sep 28 20:21:15 m82 kernel: Using ACPI (MADT) for SMP configuration information
Sep 28 20:21:15 m82 kernel: Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
Sep 28 20:21:15 m82 kernel: Checking aperture...
Sep 28 20:21:15 m82 kernel: Built 1 zonelists
Sep 28 20:21:15 m82 kernel: Kernel command line: ro root=/dev/sda1 rhgb
Sep 28 20:21:15 m82 kernel: Initializing CPU#0
Sep 28 20:21:15 m82 kernel: PID hash table entries: 4096 (order: 12, 131072 bytes)
Sep 28 20:21:15 m82 kernel: time.c: Using 3.579545 MHz PM timer.
Sep 28 20:21:15 m82 kernel: time.c: Detected 3400.281 MHz processor.
Sep 28 20:21:15 m82 kernel: Console: colour VGA+ 80x25
Sep 28 20:21:15 m82 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Sep 28 20:21:15 m82 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Sep 28 20:21:15 m82 kernel: Placing software IO TLB between 0x7e5d000 - 0xbe5d000
Sep 28 20:21:15 m82 kernel: Memory: 6105160k/7340032k available (3441k kernel code, 185316k reserved, 2051k data, 224k init)
Sep 28 20:21:15 m82 kernel: Calibrating delay using timer specific routine.. 6806.63 BogoMIPS (lpj=3403318)
Sep 28 20:21:15 m82 kernel: Mount-cache hash table entries: 256
Sep 28 20:21:15 m82 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Sep 28 20:21:15 m82 kernel: CPU: L2 cache: 2048K
Sep 28 20:21:15 m82 kernel: using mwait in idle threads.
Sep 28 20:21:15 m82 kernel: CPU: Physical Processor ID: 0
Sep 28 20:21:15 m82 kernel: CPU0: Thermal monitoring enabled (TM1)
Sep 28 20:21:15 m82 kernel: mtrr: v2.0 (20020519)
Sep 28 20:21:15 m82 kernel: Using local APIC timer interrupts.
Sep 28 20:21:15 m82 kernel: Detected 12.500 MHz APIC timer.
Sep 28 20:21:15 m82 kernel: Booting processor 1/4 APIC 0x6
Sep 28 20:21:15 m82 kernel: Initializing CPU#1
Sep 28 20:21:15 m82 kernel: Calibrating delay using timer specific routine.. 6804.23 BogoMIPS (lpj=3402116)
Sep 28 20:21:15 m82 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Sep 28 20:21:15 m82 kernel: CPU: L2 cache: 2048K
Sep 28 20:21:15 m82 kernel: CPU: Physical Processor ID: 3
Sep 28 20:21:15 m82 kernel: CPU1: Thermal monitoring enabled (TM1)
Sep 28 20:21:15 m82 kernel:                   Intel(R) Xeon(TM) CPU 3.40GHz stepping 03
Sep 28 20:21:15 m82 kernel: CPU 1: Syncing TSC to CPU 0.
Sep 28 20:21:15 m82 kernel: CPU 1: synchronized TSC with CPU 0 (last diff -13 cycles, maxerr 1581 cycles)
Sep 28 20:21:15 m82 kernel: Booting processor 2/4 APIC 0x1
Sep 28 20:21:15 m82 kernel: Initializing CPU#2
Sep 28 20:21:15 m82 kernel: Calibrating delay using timer specific routine.. 6799.27 BogoMIPS (lpj=3399639)
Sep 28 20:21:15 m82 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Sep 28 20:21:15 m82 kernel: CPU: L2 cache: 2048K
Sep 28 20:21:15 m82 kernel: CPU: Physical Processor ID: 0
Sep 28 20:21:15 m82 kernel: CPU2: Thermal monitoring enabled (TM1)
Sep 28 20:21:15 m82 kernel:                   Intel(R) Xeon(TM) CPU 3.40GHz stepping 03
Sep 28 20:21:15 m82 kernel: CPU 2: Syncing TSC to CPU 0.
Sep 28 20:21:15 m82 kernel: CPU 2: synchronized TSC with CPU 0 (last diff -20 cycles, maxerr 859 cycles)
Sep 28 20:21:15 m82 kernel: Booting processor 3/4 APIC 0x7
Sep 28 20:21:15 m82 kernel: Initializing CPU#3
Sep 28 20:21:15 m82 kernel: Calibrating delay using timer specific routine.. 6799.42 BogoMIPS (lpj=3399713)
Sep 28 20:21:15 m82 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Sep 28 20:21:15 m82 kernel: CPU: L2 cache: 2048K
Sep 28 20:21:15 m82 kernel: CPU: Physical Processor ID: 3
Sep 28 20:21:15 m82 kernel: CPU3: Thermal monitoring enabled (TM1)
Sep 28 20:21:15 m82 kernel:                   Intel(R) Xeon(TM) CPU 3.40GHz stepping 03
Sep 28 20:21:15 m82 kernel: CPU 3: Syncing TSC to CPU 0.
Sep 28 20:21:15 m82 kernel: CPU 3: synchronized TSC with CPU 0 (last diff 64 cycles, maxerr 1589 cycles)
Sep 28 20:21:15 m82 kernel: Brought up 4 CPUs
Sep 28 20:21:15 m82 kernel: time.c: Using PIT/TSC based timekeeping.
Sep 28 20:21:15 m82 kernel: testing NMI watchdog ... OK.
Sep 28 20:21:15 m82 kernel: NET: Registered protocol family 16
Sep 28 20:21:15 m82 kernel: ACPI: bus type pci registered
Sep 28 20:21:15 m82 kernel: PCI: Using configuration type 1
Sep 28 20:21:15 m82 kernel: PCI: Using MMCONFIG at e0000000
Sep 28 20:21:15 m82 kernel: ACPI: Subsystem revision 20050902
Sep 28 20:21:15 m82 kernel: ACPI: Interpreter enabled
Sep 28 20:21:15 m82 kernel: ACPI: Using IOAPIC for interrupt routing
Sep 28 20:21:15 m82 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep 28 20:21:15 m82 kernel: PCI: Probing PCI hardware (bus 00)
Sep 28 20:21:15 m82 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Sep 28 20:21:15 m82 kernel: PCI: PXH quirk detected, disabling MSI for SHPC device
Sep 28 20:21:15 m82 kernel: PCI: PXH quirk detected, disabling MSI for SHPC device
Sep 28 20:21:15 m82 kernel: PCI: Transparent bridge - 0000:00:1e.0
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
Sep 28 20:21:16 m82 kernel: ACPI: Device [PRT] status [0000000c]: functional but not present; setting present
Sep 28 20:21:16 m82 kernel: SCSI subsystem initialized
Sep 28 20:21:16 m82 kernel: usbcore: registered new driver usbfs
Sep 28 20:21:16 m82 kernel: usbcore: registered new driver hub
Sep 28 20:21:16 m82 kernel: PCI: Using ACPI for IRQ routing
Sep 28 20:21:16 m82 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Sep 28 20:21:16 m82 kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Sep 28 20:21:16 m82 kernel: PCI: Bridge: 0000:01:00.0
Sep 28 20:21:16 m82 kernel:   IO window: 2000-2fff
Sep 28 20:21:16 m82 kernel:   MEM window: dd200000-dd2fffff
Sep 28 20:21:16 m82 kernel:   PREFETCH window: c2000000-c20fffff
Sep 28 20:21:16 m82 kernel: PCI: Bridge: 0000:01:00.2
Sep 28 20:21:16 m82 kernel:   IO window: 3000-3fff
Sep 28 20:21:16 m82 kernel:   MEM window: dd300000-dd3fffff
Sep 28 20:21:16 m82 kernel:   PREFETCH window: disabled.
Sep 28 20:21:16 m82 kernel: PCI: Bridge: 0000:00:02.0
Sep 28 20:21:16 m82 kernel:   IO window: 2000-3fff
Sep 28 20:21:16 m82 kernel:   MEM window: dd100000-dd3fffff
Sep 28 20:21:16 m82 kernel:   PREFETCH window: c2000000-c20fffff
Sep 28 20:21:16 m82 kernel: PCI: Bridge: 0000:00:04.0
Sep 28 20:21:16 m82 kernel:   IO window: disabled.
Sep 28 20:21:16 m82 kernel:   MEM window: disabled.
Sep 28 20:21:16 m82 kernel:   PREFETCH window: disabled.
Sep 28 20:21:16 m82 kernel: PCI: Bridge: 0000:00:06.0
Sep 28 20:21:16 m82 kernel:   IO window: disabled.
Sep 28 20:21:16 m82 kernel:   MEM window: disabled.
Sep 28 20:21:16 m82 kernel:   PREFETCH window: disabled.
Sep 28 20:21:16 m82 kernel: PCI: Bridge: 0000:00:1e.0
Sep 28 20:21:16 m82 kernel:   IO window: 4000-4fff
Sep 28 20:21:16 m82 kernel:   MEM window: dd400000-deffffff
Sep 28 20:21:16 m82 kernel:   PREFETCH window: c2100000-c21fffff
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
Sep 28 20:21:16 m82 kernel: Simple Boot Flag at 0x39 set to 0x1
Sep 28 20:21:16 m82 kernel: IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Sep 28 20:21:16 m82 kernel: IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Sep 28 20:21:16 m82 kernel: audit: initializing netlink socket (disabled)
Sep 28 20:21:16 m82 kernel: audit(1127931611.535:1): initialized
Sep 28 20:21:16 m82 kernel: Total HugeTLB memory allocated, 0
Sep 28 20:21:16 m82 kernel: VFS: Disk quotas dquot_6.5.1
Sep 28 20:21:16 m82 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Sep 28 20:21:16 m82 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Sep 28 20:21:16 m82 kernel: Initializing Cryptographic API
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
Sep 28 20:21:16 m82 kernel: ACPI: Power Button (FF) [PWRF]
Sep 28 20:21:16 m82 kernel: ACPI: Power Button (CM) [PWRB]
Sep 28 20:21:16 m82 kernel: ACPI: CPU0 (power states: C1[C1])
Sep 28 20:21:16 m82 kernel: ACPI: CPU1 (power states: C1[C1])
Sep 28 20:21:16 m82 kernel: ACPI: CPU2 (power states: C1[C1])
Sep 28 20:21:16 m82 kernel: ACPI: CPU3 (power states: C1[C1])
Sep 28 20:21:16 m82 kernel: Real Time Clock Driver v1.12
Sep 28 20:21:16 m82 kernel: hw_random: RNG not detected
Sep 28 20:21:16 m82 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Sep 28 20:21:16 m82 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 28 20:21:16 m82 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 28 20:21:16 m82 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled
Sep 28 20:21:16 m82 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 28 20:21:16 m82 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Sep 28 20:21:16 m82 kernel: io scheduler noop registered
Sep 28 20:21:16 m82 kernel: io scheduler anticipatory registered
Sep 28 20:21:16 m82 kernel: io scheduler deadline registered
Sep 28 20:21:16 m82 kernel: io scheduler cfq registered
Sep 28 20:21:16 m82 kernel: Floppy drive(s): fd0 is 1.44M
Sep 28 20:21:16 m82 kernel: FDC 0 is a National Semiconductor PC87306
Sep 28 20:21:16 m82 kernel: loop: loaded (max 8 devices)
Sep 28 20:21:16 m82 kernel: Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI
Sep 28 20:21:16 m82 kernel: Copyright (c) 1999-2005 Intel Corporation.
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 54 (level, low) -> IRQ 177
Sep 28 20:21:16 m82 kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt 0000:03:02.1[B] -> GSI 55 (level, low) -> IRQ 185
Sep 28 20:21:16 m82 kernel: e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
Sep 28 20:21:16 m82 kernel: tun: Universal TUN/TAP device driver, 1.6
Sep 28 20:21:16 m82 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep 28 20:21:16 m82 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Sep 28 20:21:16 m82 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Sep 28 20:21:16 m82 kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
Sep 28 20:21:16 m82 kernel: ICH5: chipset revision 2
Sep 28 20:21:16 m82 kernel: ICH5: not 100% native mode: will probe irqs later
Sep 28 20:21:16 m82 kernel:     ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:pio, hdb:pio
Sep 28 20:21:16 m82 kernel:     ide1: BM-DMA at 0x14a8-0x14af, BIOS settings: hdc:pio, hdd:DMA
Sep 28 20:21:16 m82 kernel: hdd: MATSHITADVD-ROM SR-8178, ATAPI CD/DVD-ROM drive
Sep 28 20:21:16 m82 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Sep 28 20:21:16 m82 kernel: hdd: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Sep 28 20:21:16 m82 kernel: Uniform CD-ROM driver Revision: 3.20
Sep 28 20:21:16 m82 kernel: ide-floppy driver 0.99.newide
Sep 28 20:21:16 m82 kernel: ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 32 (level, low) -> IRQ 201
Sep 28 20:21:16 m82 kernel: scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
Sep 28 20:21:16 m82 kernel:         <Adaptec AIC7902 Ultra320 SCSI adapter>
Sep 28 20:21:16 m82 kernel:         aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
Sep 28 20:21:16 m82 kernel: 
Sep 28 20:21:16 m82 kernel:   Vendor: SEAGATE   Model: ST373207LC        Rev: 0003
Sep 28 20:21:16 m82 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Sep 28 20:21:17 m82 kernel:  target0:0:0: asynchronous.
Sep 28 20:21:17 m82 kernel: scsi0:A:0:0: Tagged Queuing enabled.  Depth 4
Sep 28 20:21:17 m82 kernel:  target0:0:0: Beginning Domain Validation
Sep 28 20:21:17 m82 kernel:  target0:0:0: wide asynchronous.
Sep 28 20:21:17 m82 kernel:  target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
Sep 28 20:21:17 m82 kernel:  target0:0:0: Ending Domain Validation
Sep 28 20:21:17 m82 kernel:   Vendor: SUPER     Model: GEM318            Rev: 0   
Sep 28 20:21:17 m82 kernel:   Type:   Processor                          ANSI SCSI revision: 02
Sep 28 20:21:17 m82 kernel:  target0:0:6: asynchronous.
Sep 28 20:21:17 m82 kernel:  target0:0:6: Beginning Domain Validation
Sep 28 20:21:17 m82 kernel:  target0:0:6: Ending Domain Validation
Sep 28 20:21:17 m82 kernel: ACPI: PCI Interrupt 0000:02:02.1[B] -> GSI 33 (level, low) -> IRQ 209
Sep 28 20:21:17 m82 kernel: scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
Sep 28 20:21:17 m82 kernel:         <Adaptec AIC7902 Ultra320 SCSI adapter>
Sep 28 20:21:17 m82 kernel:         aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
Sep 28 20:21:17 m82 kernel: 
Sep 28 20:21:17 m82 kernel:   Vendor: VP-1252-  Model: FB951223-VOL#00   Rev: R001
Sep 28 20:21:17 m82 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Sep 28 20:21:17 m82 kernel:  target1:0:0: asynchronous.
Sep 28 20:21:17 m82 kernel: scsi1:A:0:0: Tagged Queuing enabled.  Depth 4
Sep 28 20:21:17 m82 kernel:  target1:0:0: Beginning Domain Validation
Sep 28 20:21:17 m82 kernel:  target1:0:0: wide asynchronous.
Sep 28 20:21:17 m82 kernel:  target1:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
Sep 28 20:21:17 m82 kernel:  target1:0:0: Ending Domain Validation
Sep 28 20:21:17 m82 kernel:   Vendor: VP-1252-  Model: FB951223-VOL#01   Rev: R001
Sep 28 20:21:17 m82 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Sep 28 20:21:17 m82 kernel: scsi1:A:0:1: Tagged Queuing enabled.  Depth 4
Sep 28 20:21:17 m82 kernel: st: Version 20050830, fixed bufsize 32768, s/g segs 256
Sep 28 20:21:17 m82 kernel: SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB)
Sep 28 20:21:17 m82 kernel: SCSI device sda: drive cache: write back
Sep 28 20:21:17 m82 kernel: SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB)
Sep 28 20:21:17 m82 kernel: SCSI device sda: drive cache: write back
Sep 28 20:21:17 m82 kernel:  sda: sda1 sda2 sda3 sda4
Sep 28 20:21:17 m82 kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Sep 28 20:21:17 m82 kernel: SCSI device sdb: 3906247680 512-byte hdwr sectors (1999999 MB)
Sep 28 20:21:18 m82 kernel: SCSI device sdb: drive cache: write back
Sep 28 20:21:18 m82 kernel: SCSI device sdb: 3906247680 512-byte hdwr sectors (1999999 MB)
Sep 28 20:21:18 m82 kernel: SCSI device sdb: drive cache: write back
Sep 28 20:21:18 m82 kernel:  sdb: sdb1
Sep 28 20:21:19 m82 kernel: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Sep 28 20:21:19 m82 kernel: SCSI device sdc: 3906242560 512-byte hdwr sectors (1999996 MB)
Sep 28 20:21:19 m82 kernel: SCSI device sdc: drive cache: write back
Sep 28 20:21:19 m82 kernel: SCSI device sdc: 3906242560 512-byte hdwr sectors (1999996 MB)
Sep 28 20:21:19 m82 kernel: SCSI device sdc: drive cache: write back
Sep 28 20:21:19 m82 kernel:  sdc: sdc1
Sep 28 20:21:19 m82 kernel: Attached scsi disk sdc at scsi1, channel 0, id 0, lun 1
Sep 28 20:21:19 m82 kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Sep 28 20:21:19 m82 kernel: Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0,  type 3
Sep 28 20:21:19 m82 kernel: Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0,  type 0
Sep 28 20:21:19 m82 kernel: Attached scsi generic sg3 at scsi1, channel 0, id 0, lun 1,  type 0
Sep 28 20:21:19 m82 kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 217
Sep 28 20:21:19 m82 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep 28 20:21:19 m82 kernel: ehci_hcd 0000:00:1d.7: debug port 1
Sep 28 20:21:19 m82 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep 28 20:21:19 m82 kernel: ehci_hcd 0000:00:1d.7: irq 217, io mem 0xdd000000
Sep 28 20:21:19 m82 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Sep 28 20:21:19 m82 kernel: hub 1-0:1.0: USB hub found
Sep 28 20:21:19 m82 kernel: hub 1-0:1.0: 8 ports detected
Sep 28 20:21:19 m82 kernel: USB Universal Host Controller Interface driver v2.3
Sep 28 20:21:19 m82 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001400
Sep 28 20:21:19 m82 kernel: hub 2-0:1.0: USB hub found
Sep 28 20:21:19 m82 kernel: hub 2-0:1.0: 2 ports detected
Sep 28 20:21:19 m82 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.1: irq 225, io base 0x00001420
Sep 28 20:21:19 m82 kernel: hub 3-0:1.0: USB hub found
Sep 28 20:21:19 m82 kernel: hub 3-0:1.0: 2 ports detected
Sep 28 20:21:19 m82 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.2: irq 193, io base 0x00001440
Sep 28 20:21:19 m82 kernel: hub 4-0:1.0: USB hub found
Sep 28 20:21:19 m82 kernel: hub 4-0:1.0: 2 ports detected
Sep 28 20:21:19 m82 kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep 28 20:21:19 m82 kernel: uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001460
Sep 28 20:21:19 m82 kernel: hub 5-0:1.0: USB hub found
Sep 28 20:21:19 m82 kernel: hub 5-0:1.0: 2 ports detected
Sep 28 20:21:19 m82 kernel: Initializing USB Mass Storage driver...
Sep 28 20:21:19 m82 kernel: usbcore: registered new driver usb-storage
Sep 28 20:21:19 m82 kernel: USB Mass Storage support registered.
Sep 28 20:21:19 m82 kernel: usbcore: registered new driver hiddev
Sep 28 20:21:19 m82 kernel: usbcore: registered new driver usbhid
Sep 28 20:21:19 m82 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Sep 28 20:21:20 m82 kernel: mice: PS/2 mouse device common for all mice
Sep 28 20:21:20 m82 kernel: i2c /dev entries driver
Sep 28 20:21:20 m82 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Sep 28 20:21:20 m82 kernel: i2c_adapter i2c-0: Unsupported chip (man_id=0x01, chip_id=0x73).
Sep 28 20:21:20 m82 kernel: i2c_adapter i2c-0: detect fail: address match, 0x2e
Sep 28 20:21:20 m82 kernel: hdaps: supported laptop not found!
Sep 28 20:21:20 m82 kernel: hdaps: driver init failed (ret=-6)!
Sep 28 20:21:20 m82 kernel: Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6eb1, caps: 0xa84793/0x554755
Sep 28 20:21:20 m82 kernel: serio: Synaptics pass-through port at isa0060/serio1/input0
Sep 28 20:21:20 m82 kernel: input: SynPS/2 Synaptics TouchPad on isa0060/serio1
Sep 28 20:21:20 m82 kernel: pc87360: PC8736x not detected, module not inserted.
Sep 28 20:21:20 m82 kernel: NET: Registered protocol family 2
Sep 28 20:21:20 m82 kernel: IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sep 28 20:21:20 m82 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Sep 28 20:21:20 m82 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Sep 28 20:21:20 m82 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Sep 28 20:21:20 m82 kernel: TCP reno registered
Sep 28 20:21:20 m82 kernel: ip_conntrack version 2.3 (8192 buckets, 65536 max) - 344 bytes per conntrack
Sep 28 20:21:20 m82 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Sep 28 20:21:20 m82 kernel: ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
Sep 28 20:21:20 m82 kernel: ClusterIP Version 0.8 loaded successfully
Sep 28 20:21:20 m82 kernel: arp_tables: (C) 2002 David S. Miller
Sep 28 20:21:20 m82 kernel: TCP bic registered
Sep 28 20:21:20 m82 kernel: Initializing IPsec netlink socket
Sep 28 20:21:20 m82 kernel: NET: Registered protocol family 1
Sep 28 20:21:20 m82 kernel: NET: Registered protocol family 17
Sep 28 20:21:20 m82 kernel: NET: Registered protocol family 15
Sep 28 20:21:20 m82 kernel: ReiserFS: sda1: found reiserfs format "3.6" with standard journal
Sep 28 20:21:20 m82 kernel: ReiserFS: sda1: using ordered data mode
Sep 28 20:21:20 m82 kernel: ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Sep 28 20:21:20 m82 kernel: ReiserFS: sda1: checking transaction log (sda1)
Sep 28 20:21:20 m82 kernel: ReiserFS: sda1: Using r5 hash to sort names
Sep 28 20:21:20 m82 kernel: VFS: Mounted root (reiserfs filesystem) readonly.
Sep 28 20:21:20 m82 kernel: Freeing unused kernel memory: 224k freed
Sep 28 20:21:20 m82 kernel: kmodule[1374]: segfault at ffffffffffffffff rip 0000003257d70313 rsp 00007fffff93d638 error 4
Sep 28 20:21:20 m82 kernel: ReiserFS: sda4: found reiserfs format "3.6" with standard journal
Sep 28 20:21:20 m82 kernel: ReiserFS: sda4: using ordered data mode
Sep 28 20:21:20 m82 kernel: ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Sep 28 20:21:20 m82 kernel: ReiserFS: sda4: checking transaction log (sda4)
Sep 28 20:21:20 m82 kernel: ReiserFS: sda4: Using r5 hash to sort names
Sep 28 20:21:20 m82 kernel: ReiserFS: sda2: found reiserfs format "3.6" with standard journal
Sep 28 20:21:20 m82 kernel: ReiserFS: sda2: using ordered data mode
Sep 28 20:21:20 m82 kernel: ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Sep 28 20:21:20 m82 kernel: ReiserFS: sda2: checking transaction log (sda2)
Sep 28 20:21:20 m82 kernel: ReiserFS: sda2: Using r5 hash to sort names
Sep 28 20:21:20 m82 kernel: Adding 1959920k swap on /dev/sda3.  Priority:-1 extents:1 across:1959920k
Sep 28 20:21:20 m82 kernel: e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
Sep 28 20:26:11 m82 kernel: ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
Sep 28 20:26:42 m82 kernel: scsi1:0:0:0: Attempting to queue an ABORT message:CDB: 0x28 0x0 0xf 0xdc 0x0 0x3f 0x0 0x0 0x8 0x0
Sep 28 20:26:42 m82 kernel: Infinite interrupt loop, INTSTAT = 0scsi1: At time of recovery, card was not paused
Sep 28 20:26:42 m82 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Sep 28 20:26:42 m82 kernel: scsi1: Dumping Card State at program address 0x26 Mode 0x22
Sep 28 20:26:42 m82 kernel: Card was paused
Sep 28 20:26:42 m82 kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
Sep 28 20:26:42 m82 kernel: DFFSTAT[0x33] SCSISIGI[0x24] SCSIPHASE[0x0] SCSIBUS[0x0] 
Sep 28 20:26:42 m82 kernel: LASTPHASE[0x1] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] 
Sep 28 20:26:42 m82 kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x10] 
Sep 28 20:26:42 m82 kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
Sep 28 20:26:42 m82 kernel: SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80] 
Sep 28 20:26:42 m82 kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x40] 
Sep 28 20:26:42 m82 kernel: 
Sep 28 20:26:42 m82 kernel: SCB Count = 4 CMDS_PENDING = 4 LASTSCB 0x1 CURRSCB 0x1 NEXTSCB 0xffc0
Sep 28 20:26:42 m82 kernel: qinstart = 1108 qinfifonext = 1108
Sep 28 20:26:42 m82 kernel: QINFIFO:
Sep 28 20:26:42 m82 kernel: WAITING_TID_QUEUES:
Sep 28 20:26:42 m82 kernel:        0 ( 0x1 0x3 )
Sep 28 20:26:42 m82 kernel: Pending list:
Sep 28 20:26:42 m82 kernel:   3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:26:43 m82 kernel:   1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:26:43 m82 kernel:   0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:26:43 m82 kernel:   2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:26:43 m82 kernel: Total 4
Sep 28 20:26:43 m82 kernel: Kernel Free SCB list: 
Sep 28 20:26:43 m82 kernel: Sequencer Complete DMA-inprog list: 
Sep 28 20:26:43 m82 kernel: Sequencer Complete list: 
Sep 28 20:26:43 m82 kernel: Sequencer DMA-Up and Complete list: 
Sep 28 20:26:43 m82 kernel: 
Sep 28 20:26:43 m82 kernel: scsi1: FIFO0 Free, LONGJMP == 0x8252, SCB 0x3
Sep 28 20:26:43 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:26:43 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:26:43 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:26:43 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:26:43 m82 kernel: scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
Sep 28 20:26:43 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:26:43 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:26:43 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:26:43 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:26:43 m82 kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
Sep 28 20:26:43 m82 kernel: scsi1: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
Sep 28 20:26:43 m82 kernel: scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
Sep 28 20:26:43 m82 kernel: SIMODE0[0xc] 
Sep 28 20:26:43 m82 kernel: CCSCBCTL[0x4] 
Sep 28 20:26:43 m82 kernel: scsi1: REG0 == 0x3, SINDEX = 0x102, DINDEX = 0x102
Sep 28 20:26:43 m82 kernel: scsi1: SCBPTR == 0x1, SCB_NEXT == 0x3, SCB_NEXT2 == 0xff01
Sep 28 20:26:43 m82 kernel: CDB 28 0 f e4 0 3f
Sep 28 20:26:43 m82 kernel: STACK: 0x14 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Sep 28 20:26:43 m82 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Sep 28 20:26:43 m82 kernel: scsi1:0:0:0: Cmd aborted from QINFIFO
Sep 28 20:26:43 m82 kernel: aic79xx_abort returns 0x2002
Sep 28 20:26:52 m82 kernel: scsi1:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
Sep 28 20:26:53 m82 kernel: Infinite interrupt loop, INTSTAT = 0scsi1: At time of recovery, card was not paused
Sep 28 20:26:53 m82 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Sep 28 20:26:53 m82 kernel: scsi1: Dumping Card State at program address 0xf Mode 0x33
Sep 28 20:26:53 m82 kernel: Card was paused
Sep 28 20:26:53 m82 kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
Sep 28 20:26:53 m82 kernel: DFFSTAT[0x33] SCSISIGI[0x24] SCSIPHASE[0x0] SCSIBUS[0x0] 
Sep 28 20:26:53 m82 kernel: LASTPHASE[0x1] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] 
Sep 28 20:26:53 m82 kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x10] 
Sep 28 20:26:53 m82 kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
Sep 28 20:26:53 m82 kernel: SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80] 
Sep 28 20:26:53 m82 kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x40] 
Sep 28 20:26:53 m82 kernel: 
Sep 28 20:26:53 m82 kernel: SCB Count = 4 CMDS_PENDING = 3 LASTSCB 0x1 CURRSCB 0x1 NEXTSCB 0xffc0
Sep 28 20:26:53 m82 kernel: qinstart = 1109 qinfifonext = 1109
Sep 28 20:26:53 m82 kernel: QINFIFO:
Sep 28 20:26:53 m82 kernel: WAITING_TID_QUEUES:
Sep 28 20:26:53 m82 kernel:        0 ( 0x3 )
Sep 28 20:26:53 m82 kernel: Pending list:
Sep 28 20:26:53 m82 kernel:   3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:26:53 m82 kernel:   0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:26:53 m82 kernel:   2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:26:53 m82 kernel: Total 3
Sep 28 20:26:53 m82 kernel: Kernel Free SCB list: 1 
Sep 28 20:26:53 m82 kernel: Sequencer Complete DMA-inprog list: 
Sep 28 20:26:53 m82 kernel: Sequencer Complete list: 
Sep 28 20:26:53 m82 kernel: Sequencer DMA-Up and Complete list: 
Sep 28 20:26:53 m82 kernel: 
Sep 28 20:26:53 m82 kernel: scsi1: FIFO0 Free, LONGJMP == 0x8252, SCB 0x3
Sep 28 20:26:53 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:26:53 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:26:53 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:26:53 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:26:53 m82 kernel: scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
Sep 28 20:26:53 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:26:53 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:26:53 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:26:53 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:26:53 m82 kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
Sep 28 20:26:53 m82 kernel: scsi1: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
Sep 28 20:26:53 m82 kernel: scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
Sep 28 20:26:53 m82 kernel: SIMODE0[0xc] 
Sep 28 20:26:53 m82 kernel: CCSCBCTL[0x4] 
Sep 28 20:26:53 m82 kernel: scsi1: REG0 == 0x2, SINDEX = 0x102, DINDEX = 0x102
Sep 28 20:26:53 m82 kernel: scsi1: SCBPTR == 0x3, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff01
Sep 28 20:26:53 m82 kernel: CDB 0 0 0 0 0 0
Sep 28 20:26:53 m82 kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Sep 28 20:26:53 m82 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Sep 28 20:26:53 m82 kernel: scsi1:0:0:0: Cmd aborted from QINFIFO
Sep 28 20:26:53 m82 kernel: aic79xx_abort returns 0x2002
Sep 28 20:26:53 m82 kernel: scsi1:0:0:0: Attempting to queue an ABORT message:CDB: 0x28 0x0 0xf 0xe0 0x0 0x3f 0x0 0x0 0x8 0x0
Sep 28 20:26:53 m82 kernel: Infinite interrupt loop, INTSTAT = 0scsi1: At time of recovery, card was not paused
Sep 28 20:26:53 m82 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Sep 28 20:26:53 m82 kernel: scsi1: Dumping Card State at program address 0x26 Mode 0x22
Sep 28 20:26:53 m82 kernel: Card was paused
Sep 28 20:26:53 m82 kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
Sep 28 20:26:53 m82 kernel: DFFSTAT[0x33] SCSISIGI[0x24] SCSIPHASE[0x0] SCSIBUS[0x0] 
Sep 28 20:26:53 m82 kernel: LASTPHASE[0x1] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] 
Sep 28 20:26:53 m82 kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x10] 
Sep 28 20:26:53 m82 kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
Sep 28 20:26:53 m82 kernel: SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80] 
Sep 28 20:26:53 m82 kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x40] 
Sep 28 20:26:53 m82 kernel: 
Sep 28 20:26:53 m82 kernel: SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x1 CURRSCB 0x1 NEXTSCB 0xffc0
Sep 28 20:26:53 m82 kernel: qinstart = 1109 qinfifonext = 1109
Sep 28 20:26:53 m82 kernel: QINFIFO:
Sep 28 20:26:53 m82 kernel: WAITING_TID_QUEUES:
Sep 28 20:26:53 m82 kernel: Pending list:
Sep 28 20:26:53 m82 kernel:   0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:26:53 m82 kernel:   2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:26:53 m82 kernel: Total 2
Sep 28 20:26:53 m82 kernel: Kernel Free SCB list: 3 1 
Sep 28 20:26:53 m82 kernel: Sequencer Complete DMA-inprog list: 
Sep 28 20:26:53 m82 kernel: Sequencer Complete list: 
Sep 28 20:26:53 m82 kernel: Sequencer DMA-Up and Complete list: 
Sep 28 20:26:53 m82 kernel: 
Sep 28 20:26:53 m82 kernel: scsi1: FIFO0 Free, LONGJMP == 0x8252, SCB 0x3
Sep 28 20:26:53 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:26:53 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:26:53 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:26:53 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:26:53 m82 kernel: scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
Sep 28 20:26:53 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:26:53 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:26:53 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:26:53 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:26:53 m82 kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
Sep 28 20:26:53 m82 kernel: scsi1: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
Sep 28 20:26:53 m82 kernel: scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
Sep 28 20:26:53 m82 kernel: SIMODE0[0xc] 
Sep 28 20:26:53 m82 kernel: CCSCBCTL[0x4] 
Sep 28 20:26:53 m82 kernel: scsi1: REG0 == 0x3, SINDEX = 0x102, DINDEX = 0x102
Sep 28 20:26:53 m82 kernel: scsi1: SCBPTR == 0xff00, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
Sep 28 20:26:53 m82 kernel: CDB 0 1 0 0 0 0
Sep 28 20:26:53 m82 kernel: STACK: 0x14 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Sep 28 20:26:53 m82 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Sep 28 20:26:53 m82 kernel: (scsi1:A:0:0): Device is disconnected, re-queuing SCB
Sep 28 20:26:53 m82 kernel: Recovery code sleeping
Sep 28 20:26:58 m82 kernel: Recovery code awake
Sep 28 20:26:58 m82 kernel: Timer Expired
Sep 28 20:26:58 m82 kernel: aic79xx_abort returns 0x2003
Sep 28 20:26:58 m82 kernel: scsi1:0:0:0: Attempting to queue an ABORT message:CDB: 0x28 0x0 0xf 0xe4 0x0 0x3f 0x0 0x0 0x8 0x0
Sep 28 20:26:58 m82 kernel: scsi1:0:0:0: Command not found
Sep 28 20:26:58 m82 kernel: aic79xx_abort returns 0x2002
Sep 28 20:27:08 m82 kernel: scsi1:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
Sep 28 20:27:08 m82 kernel: Infinite interrupt loop, INTSTAT = 0scsi1: At time of recovery, card was not paused
Sep 28 20:27:08 m82 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Sep 28 20:27:08 m82 kernel: scsi1: Dumping Card State at program address 0xc Mode 0x33
Sep 28 20:27:08 m82 kernel: Card was paused
Sep 28 20:27:08 m82 kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
Sep 28 20:27:08 m82 kernel: DFFSTAT[0x33] SCSISIGI[0x24] SCSIPHASE[0x0] SCSIBUS[0x0] 
Sep 28 20:27:08 m82 kernel: LASTPHASE[0x1] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] 
Sep 28 20:27:08 m82 kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x10] 
Sep 28 20:27:08 m82 kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
Sep 28 20:27:08 m82 kernel: SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80] 
Sep 28 20:27:08 m82 kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x40] 
Sep 28 20:27:08 m82 kernel: 
Sep 28 20:27:08 m82 kernel: SCB Count = 4 CMDS_PENDING = 3 LASTSCB 0x1 CURRSCB 0x1 NEXTSCB 0xffc0
Sep 28 20:27:08 m82 kernel: qinstart = 1111 qinfifonext = 1111
Sep 28 20:27:08 m82 kernel: QINFIFO:
Sep 28 20:27:08 m82 kernel: WAITING_TID_QUEUES:
Sep 28 20:27:08 m82 kernel:        0 ( 0x0 0x3 )
Sep 28 20:27:08 m82 kernel: Pending list:
Sep 28 20:27:08 m82 kernel:   3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:27:08 m82 kernel:   0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:27:08 m82 kernel:   2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:27:08 m82 kernel: Total 3
Sep 28 20:27:08 m82 kernel: Kernel Free SCB list: 1 
Sep 28 20:27:08 m82 kernel: Sequencer Complete DMA-inprog list: 
Sep 28 20:27:08 m82 kernel: Sequencer Complete list: 
Sep 28 20:27:08 m82 kernel: Sequencer DMA-Up and Complete list: 
Sep 28 20:27:08 m82 kernel: 
Sep 28 20:27:08 m82 kernel: scsi1: FIFO0 Free, LONGJMP == 0x8252, SCB 0x3
Sep 28 20:27:08 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:27:08 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:27:08 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:27:08 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:27:08 m82 kernel: scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
Sep 28 20:27:08 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:27:08 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:27:08 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:27:08 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:27:08 m82 kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
Sep 28 20:27:08 m82 kernel: scsi1: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
Sep 28 20:27:08 m82 kernel: scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
Sep 28 20:27:08 m82 kernel: SIMODE0[0xc] 
Sep 28 20:27:08 m82 kernel: CCSCBCTL[0x4] 
Sep 28 20:27:08 m82 kernel: scsi1: REG0 == 0x2, SINDEX = 0x102, DINDEX = 0x102
Sep 28 20:27:08 m82 kernel: scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff04
Sep 28 20:27:08 m82 kernel: CDB 0 0 0 0 0 0
Sep 28 20:27:08 m82 kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Sep 28 20:27:08 m82 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Sep 28 20:27:08 m82 kernel: Recovery SCB completes
Sep 28 20:27:08 m82 kernel: scsi1:0:0:0: Cmd aborted from QINFIFO
Sep 28 20:27:08 m82 kernel: aic79xx_abort returns 0x2002
Sep 28 20:27:08 m82 kernel: scsi1:0:0:0: Attempting to queue an ABORT message:CDB: 0x28 0x0 0xf 0xe8 0x0 0x3f 0x0 0x0 0x8 0x0
Sep 28 20:27:08 m82 kernel: scsi1:0:0:0: Command not found
Sep 28 20:27:08 m82 kernel: aic79xx_abort returns 0x2002
Sep 28 20:27:18 m82 kernel: scsi1:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
Sep 28 20:27:18 m82 kernel: Infinite interrupt loop, INTSTAT = 0scsi1: At time of recovery, card was not paused
Sep 28 20:27:18 m82 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Sep 28 20:27:18 m82 kernel: scsi1: Dumping Card State at program address 0xc Mode 0x33
Sep 28 20:27:18 m82 kernel: Card was paused
Sep 28 20:27:18 m82 kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
Sep 28 20:27:18 m82 kernel: DFFSTAT[0x33] SCSISIGI[0x24] SCSIPHASE[0x0] SCSIBUS[0x0] 
Sep 28 20:27:18 m82 kernel: LASTPHASE[0x1] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] 
Sep 28 20:27:18 m82 kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x10] 
Sep 28 20:27:18 m82 kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
Sep 28 20:27:18 m82 kernel: SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80] 
Sep 28 20:27:18 m82 kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x40] 
Sep 28 20:27:18 m82 kernel: 
Sep 28 20:27:18 m82 kernel: SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x1 CURRSCB 0x1 NEXTSCB 0xffc0
Sep 28 20:27:18 m82 kernel: qinstart = 1112 qinfifonext = 1112
Sep 28 20:27:18 m82 kernel: QINFIFO:
Sep 28 20:27:18 m82 kernel: WAITING_TID_QUEUES:
Sep 28 20:27:18 m82 kernel:        0 ( 0x3 )
Sep 28 20:27:18 m82 kernel: Pending list:
Sep 28 20:27:18 m82 kernel:   3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:27:18 m82 kernel:   2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:27:18 m82 kernel: Total 2
Sep 28 20:27:18 m82 kernel: Kernel Free SCB list: 0 1 
Sep 28 20:27:18 m82 kernel: Sequencer Complete DMA-inprog list: 
Sep 28 20:27:18 m82 kernel: Sequencer Complete list: 
Sep 28 20:27:18 m82 kernel: Sequencer DMA-Up and Complete list: 
Sep 28 20:27:18 m82 kernel: 
Sep 28 20:27:18 m82 kernel: scsi1: FIFO0 Free, LONGJMP == 0x8252, SCB 0x3
Sep 28 20:27:18 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:27:18 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:27:18 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:27:18 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:27:18 m82 kernel: scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
Sep 28 20:27:18 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:27:18 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:27:18 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:27:18 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:27:18 m82 kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
Sep 28 20:27:18 m82 kernel: scsi1: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
Sep 28 20:27:18 m82 kernel: scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
Sep 28 20:27:18 m82 kernel: SIMODE0[0xc] 
Sep 28 20:27:18 m82 kernel: CCSCBCTL[0x4] 
Sep 28 20:27:18 m82 kernel: scsi1: REG0 == 0x2, SINDEX = 0x102, DINDEX = 0x102
Sep 28 20:27:18 m82 kernel: scsi1: SCBPTR == 0x3, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff01
Sep 28 20:27:18 m82 kernel: CDB 0 0 0 0 0 0
Sep 28 20:27:18 m82 kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Sep 28 20:27:18 m82 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Sep 28 20:27:18 m82 kernel: scsi1:0:0:0: Cmd aborted from QINFIFO
Sep 28 20:27:18 m82 kernel: aic79xx_abort returns 0x2002
Sep 28 20:27:18 m82 kernel: scsi1:0:0:0: Attempting to queue a TARGET RESET message:CDB: 0x28 0x0 0xf 0xdc 0x0 0x3f 0x0 0x0 0x8 0x0
Sep 28 20:27:18 m82 kernel: Infinite interrupt loop, INTSTAT = 0scsi1: At time of recovery, card was not paused
Sep 28 20:27:18 m82 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Sep 28 20:27:18 m82 kernel: scsi1: Dumping Card State at program address 0x26 Mode 0x22
Sep 28 20:27:18 m82 kernel: Card was paused
Sep 28 20:27:18 m82 kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
Sep 28 20:27:18 m82 kernel: DFFSTAT[0x33] SCSISIGI[0x24] SCSIPHASE[0x0] SCSIBUS[0x0] 
Sep 28 20:27:18 m82 kernel: LASTPHASE[0x1] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] 
Sep 28 20:27:18 m82 kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x10] 
Sep 28 20:27:18 m82 kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
Sep 28 20:27:18 m82 kernel: SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80] 
Sep 28 20:27:18 m82 kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x40] 
Sep 28 20:27:19 m82 kernel: 
Sep 28 20:27:19 m82 kernel: SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0x1 CURRSCB 0x1 NEXTSCB 0xffc0
Sep 28 20:27:19 m82 kernel: qinstart = 1112 qinfifonext = 1112
Sep 28 20:27:19 m82 kernel: QINFIFO:
Sep 28 20:27:19 m82 kernel: WAITING_TID_QUEUES:
Sep 28 20:27:19 m82 kernel: Pending list:
Sep 28 20:27:19 m82 kernel:   2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Sep 28 20:27:19 m82 kernel: Total 1
Sep 28 20:27:19 m82 kernel: Kernel Free SCB list: 3 0 1 
Sep 28 20:27:19 m82 kernel: Sequencer Complete DMA-inprog list: 
Sep 28 20:27:19 m82 kernel: Sequencer Complete list: 
Sep 28 20:27:19 m82 kernel: Sequencer DMA-Up and Complete list: 
Sep 28 20:27:19 m82 kernel: 
Sep 28 20:27:19 m82 kernel: scsi1: FIFO0 Free, LONGJMP == 0x8252, SCB 0x3
Sep 28 20:27:19 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:27:19 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:27:19 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:27:19 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:27:19 m82 kernel: scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
Sep 28 20:27:19 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Sep 28 20:27:19 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Sep 28 20:27:19 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Sep 28 20:27:19 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Sep 28 20:27:19 m82 kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
Sep 28 20:27:19 m82 kernel: scsi1: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
Sep 28 20:27:19 m82 kernel: scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
Sep 28 20:27:19 m82 kernel: SIMODE0[0xc] 
Sep 28 20:27:19 m82 kernel: CCSCBCTL[0x4] 
Sep 28 20:27:19 m82 kernel: scsi1: REG0 == 0x3, SINDEX = 0x102, DINDEX = 0x102
Sep 28 20:27:19 m82 kernel: scsi1: SCBPTR == 0xff00, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
Sep 28 20:27:19 m82 kernel: CDB 0 1 0 0 0 0
Sep 28 20:27:19 m82 kernel: STACK: 0x14 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Sep 28 20:27:19 m82 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Sep 28 20:27:19 m82 kernel: (scsi1:A:0:0): Device is disconnected, re-queuing SCB
Sep 28 20:27:19 m82 kernel: Recovery code sleeping
Sep 28 20:27:23 m82 kernel: Recovery code awake
Sep 28 20:27:23 m82 kernel: Timer Expired
Sep 28 20:27:23 m82 kernel: aic79xx_dev_reset returns 0x2003
Sep 28 20:27:23 m82 kernel: Recovery SCB completes
Sep 28 20:27:33 m82 kernel: scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0
Sep 28 20:27:33 m82 kernel: sd 1:0:0:0: SCSI error: return code = 0x30000
Sep 28 20:27:33 m82 kernel: end_request: I/O error, dev sdb, sector 266338367
Sep 28 20:27:33 m82 kernel: scsi1 (0:0): rejecting I/O to offline device
Sep 28 20:27:34 m82 last message repeated 84 times
Sep 28 20:27:34 m82 kernel: scsi1 (0:0):csi1 (0:0): rejecting I/O to offline device
Sep 28 20:27:34 m82 kernel: scsi1 (0:0): rejecting I/O to offline device
Sep 28 20:27:34 m82 last message repeated 2724 times
Sep 28 20:27:34 m82 kernel: ReiserFS: sdb1: warning: sh-2029: reiserfs read_bitmaps: bitmap block (#33259520) reading failed
Sep 28 20:27:34 m82 kernel: ReiserFS: sdb1: warning: jmacd-8: reiserfs_fill_super: unable to read bitmap
Sep 28 20:27:34 m82 kernel: scsi1 (0:0): rejecting I/O to offline device

Re: Infinite interrupt loop, INTSTAT = 0

[James Bottomley]

On Wed, 2005-09-28 at 20:33 +0200, Olivier Galibert wrote:
> Ok, for git HEAD 95001ee9256df846e374f116c92ca8e0beec1527.  The system
> has the nice idea not to crash at the end, so I can fish everything
> out of /var/log/messages (kernel messages only):

Well ... at least that's slightly better behaviour ...

I'm afraid the initial analysis is that this is a bug in the adaptec
sequencer (again) which no-one has the docs to fix.  Guessing about the
cause, I'd say it's most likely some type of data overrun, so it might
be possible to change the operating parameters of the system so it no
longer trips ...

> Sep 28 20:21:16 m82 kernel: scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
> Sep 28 20:21:16 m82 kernel:         <Adaptec AIC7902 Ultra320 SCSI adapter>
> Sep 28 20:21:16 m82 kernel:         aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
> Sep 28 20:21:16 m82 kernel: 
> Sep 28 20:21:16 m82 kernel:   Vendor: SEAGATE   Model: ST373207LC        Rev: 0003
> Sep 28 20:21:16 m82 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
> Sep 28 20:21:17 m82 kernel:  target0:0:0: asynchronous.
> Sep 28 20:21:17 m82 kernel: scsi0:A:0:0: Tagged Queuing enabled.  Depth 4
> Sep 28 20:21:17 m82 kernel:  target0:0:0: Beginning Domain Validation
> Sep 28 20:21:17 m82 kernel:  target0:0:0: wide asynchronous.
> Sep 28 20:21:17 m82 kernel:  target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
> Sep 28 20:21:17 m82 kernel:  target0:0:0: Ending Domain Validation
> Sep 28 20:21:17 m82 kernel:   Vendor: SUPER     Model: GEM318            Rev: 0   
> Sep 28 20:21:17 m82 kernel:   Type:   Processor                          ANSI SCSI revision: 02
> Sep 28 20:21:17 m82 kernel:  target0:0:6: asynchronous.
> Sep 28 20:21:17 m82 kernel:  target0:0:6: Beginning Domain Validation
> Sep 28 20:21:17 m82 kernel:  target0:0:6: Ending Domain Validation
> Sep 28 20:21:17 m82 kernel: ACPI: PCI Interrupt 0000:02:02.1[B] -> GSI 33 (level, low) -> IRQ 209
> Sep 28 20:21:17 m82 kernel: scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
> Sep 28 20:21:17 m82 kernel:         <Adaptec AIC7902 Ultra320 SCSI adapter>
> Sep 28 20:21:17 m82 kernel:         aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
> Sep 28 20:21:17 m82 kernel: 
> Sep 28 20:21:17 m82 kernel:   Vendor: VP-1252-  Model: FB951223-VOL#00   Rev: R001
> Sep 28 20:21:17 m82 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
> Sep 28 20:21:17 m82 kernel:  target1:0:0: asynchronous.
> Sep 28 20:21:17 m82 kernel: scsi1:A:0:0: Tagged Queuing enabled.  Depth 4
> Sep 28 20:21:17 m82 kernel:  target1:0:0: Beginning Domain Validation
> Sep 28 20:21:17 m82 kernel:  target1:0:0: wide asynchronous.
> Sep 28 20:21:17 m82 kernel:  target1:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)

The first thing to try here is to bring the offset down to 63 like all
the other devices.  You can do this by

echo 63 > /sys/class/spi_transport/target1\:0\:0/max_offset
echo 1 > /sys/class/spi_transport/target1\:0\:0/revalidate

Which should retrigger the above domain validation but this time come
back with an offset of 63.

*before* getting to the mount on /dev/sdb1.

If that doesn't fix it, the next steps will be to begin lowering the
transmission parameters.

James

Re: Infinite interrupt loop, INTSTAT = 0

[Olivier Galibert]

On Sat, Oct 01, 2005 at 09:03:54AM -0500, James Bottomley wrote:
> The first thing to try here is to bring the offset down to 63 like all
> the other devices.  You can do this by
> 
> echo 63 > /sys/class/spi_transport/target1\:0\:0/max_offset
> echo 1 > /sys/class/spi_transport/target1\:0\:0/revalidate
> 
> Which should retrigger the above domain validation but this time come
> back with an offset of 63.

Well, retriggering the DV blows:

Oct  3 15:39:03 m82 kernel:  target1:0:0: Beginning Domain Validation
Oct  3 15:39:03 m82 kernel:  target1:0:0: asynchronous.
Oct  3 15:39:03 m82 kernel: scsi1: Returning to Idle Loop
Oct  3 15:39:13 m82 kernel: scsi1:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x62 0x0
Oct  3 15:39:13 m82 kernel: scsi1: At time of recovery, card was not paused
Oct  3 15:39:13 m82 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Oct  3 15:39:13 m82 kernel: scsi1: Dumping Card State at program address 0x26 Mode 0x22
Oct  3 15:39:13 m82 kernel: Card was paused
Oct  3 15:39:13 m82 kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
Oct  3 15:39:13 m82 kernel: DFFSTAT[0x33] SCSISIGI[0x86] SCSIPHASE[0x10] SCSIBUS[0x0] 
Oct  3 15:39:13 m82 kernel: LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] 
Oct  3 15:39:13 m82 kernel: SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x0] 
Oct  3 15:39:13 m82 kernel: SSTAT0[0x2] SSTAT1[0x19] SSTAT2[0x0] SSTAT3[0x0] 
Oct  3 15:39:13 m82 kernel: PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] 
Oct  3 15:39:13 m82 kernel: LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] 
Oct  3 15:39:13 m82 kernel: 
Oct  3 15:39:13 m82 kernel: SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0xff80
Oct  3 15:39:13 m82 kernel: qinstart = 85 qinfifonext = 85
Oct  3 15:39:13 m82 kernel: QINFIFO:
Oct  3 15:39:13 m82 kernel: WAITING_TID_QUEUES:
Oct  3 15:39:13 m82 kernel: Pending list:
Oct  3 15:39:13 m82 kernel:   2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Oct  3 15:39:13 m82 kernel: Total 1
Oct  3 15:39:13 m82 kernel: Kernel Free SCB list: 3 1 0 
Oct  3 15:39:13 m82 kernel: Sequencer Complete DMA-inprog list: 
Oct  3 15:39:13 m82 kernel: Sequencer Complete list: 
Oct  3 15:39:13 m82 kernel: Sequencer DMA-Up and Complete list: 
Oct  3 15:39:13 m82 kernel: 
Oct  3 15:39:13 m82 kernel: scsi1: FIFO0 Free, LONGJMP == 0x8252, SCB 0x2
Oct  3 15:39:13 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Oct  3 15:39:13 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Oct  3 15:39:13 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Oct  3 15:39:13 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Oct  3 15:39:13 m82 kernel: scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
Oct  3 15:39:13 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
Oct  3 15:39:13 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
Oct  3 15:39:13 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
Oct  3 15:39:13 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
Oct  3 15:39:13 m82 kernel: LQIN: 0x8 0x0 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
Oct  3 15:39:13 m82 kernel: scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
Oct  3 15:39:13 m82 kernel: scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
Oct  3 15:39:13 m82 kernel: SIMODE0[0xc] 
Oct  3 15:39:13 m82 kernel: CCSCBCTL[0x4] 
Oct  3 15:39:13 m82 kernel: scsi1: REG0 == 0x2, SINDEX = 0x107, DINDEX = 0x102
Oct  3 15:39:13 m82 kernel: scsi1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff01
Oct  3 15:39:13 m82 kernel: CDB 12 0 0 0 62 0
Oct  3 15:39:13 m82 kernel: STACK: 0x14 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Oct  3 15:39:13 m82 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Oct  3 15:39:13 m82 kernel: (scsi1:A:0:0): Device is disconnected, re-queuing SCB
Oct  3 15:39:14 m82 kernel: Recovery code sleeping
Oct  3 15:39:18 m82 kernel: Recovery code awake
Oct  3 15:39:18 m82 kernel: Timer Expired
Oct  3 15:39:18 m82 kernel: aic79xx_abort returns 0x2003
Oct  3 15:39:18 m82 kernel: scsi1:0:0:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x62 0x0
Oct  3 15:39:18 m82 kernel: aic79xx_dev_reset returns 0x2003
Oct  3 15:39:18 m82 kernel: Recovery SCB completes
Oct  3 15:39:28 m82 kernel:  target1:0:0: Domain Validation Initial Inquiry Failed
Oct  3 15:39:28 m82 kernel:  target1:0:0: Ending Domain Validation

The two echo were done after a fresh reboot with no mount done on sdb
or sbc.

  OG.

Re: Infinite interrupt loop, INTSTAT = 0

[James Bottomley]

On Mon, 2005-10-03 at 15:42 +0200, Olivier Galibert wrote:
> Well, retriggering the DV blows:
> 
> Oct  3 15:39:03 m82 kernel:  target1:0:0: Beginning Domain Validation
> Oct  3 15:39:03 m82 kernel:  target1:0:0: asynchronous.
> Oct  3 15:39:03 m82 kernel: scsi1: Returning to Idle Loop
> Oct  3 15:39:13 m82 kernel: scsi1:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x62 0x0
> Oct  3 15:39:13 m82 kernel: scsi1: At time of recovery, card was not paused
> Oct  3 15:39:13 m82 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> Oct  3 15:39:13 m82 kernel: scsi1: Dumping Card State at program address 0x26 Mode 0x22
> Oct  3 15:39:13 m82 kernel: Card was paused

Oh, that's not pretty.  It means that the sequencer (or possibly the
bus) was wedged as it exited domain validation and it won't even recover
if we drop down to fully async.

What type of array is this, by the way?  I don't recognise the vendor.
But anyway, let's proceed on the theory that the array is having a hard
time.  What I need you to do is lower the speed of the array target in
the aic bios.  Unfortunately, the driver won't honour that setting at
the moment:  I'll see if I can work up the code that will do it.  The
attached patch will perform this artificially (for every device on every
aic79xx).

James

diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -499,11 +499,13 @@ ahd_linux_target_alloc(struct scsi_targe
 	ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id,
 			    CAM_LUN_WILDCARD, channel,
 			    ROLE_INITIATOR);
-	spi_min_period(starget) = AHD_SYNCRATE_MAX; /* We can do U320 */
+	//spi_min_period(starget) = AHD_SYNCRATE_MAX; /* We can do U320 */
+	spi_min_period(starget) = AHD_SYNCRATE_DT;
 	if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0)
 		spi_max_offset(starget) = MAX_OFFSET_PACED_BUG;
 	else
 		spi_max_offset(starget) = MAX_OFFSET_PACED;
+	spi_max_offset(starget) = 63;
 	spi_max_width(starget) = ahd->features & AHD_WIDE;
 
 	ahd_set_syncrate(ahd, &devinfo, 0, 0, 0,

Re: Infinite interrupt loop, INTSTAT = 0

[Olivier Galibert]

On Mon, Oct 03, 2005 at 12:15:44PM -0400, James Bottomley wrote:
> What type of array is this, by the way?  I don't recognise the vendor.

Fibrenetix VP-1252-U4

Controller:           FB951223
Firmware version:     V1.36 2005-3-17
BOOT ROM version:     V1.35 2005-3-3
MPT firmware version: 1.3.39.0
Main processor:       400MHz IOP321
System memory:        256MB / 200MHz

Voltages are within 5% of reference, temperatures are 37-42C.

> But anyway, let's proceed on the theory that the array is having a hard
> time.  What I need you to do is lower the speed of the array target in
> the aic bios.  Unfortunately, the driver won't honour that setting at
> the moment:  I'll see if I can work up the code that will do it.  The
> attached patch will perform this artificially (for every device on every
> aic79xx).

The mounts worked with your patch.  I'm going to start actually using
the raid, that's going to tell us how stable it actually is.  I have
no problems with doing other tests.


Oct  4 10:32:43 m82 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct  4 10:32:43 m82 kernel: Bootdata ok (command line is ro root=/dev/sda1 rhgb)
Oct  4 10:32:43 m82 kernel: Linux version 2.6.14-rc2-g95001ee9 (galibert@m82.limsi.fr) (gcc version 3.4.3 20050227 (Red Hat 3.4.3-22.fc3)) #1 SMP Wed Sep 28 20:12:23 CEST 2005
Oct  4 10:32:43 m82 kernel: BIOS-provided physical RAM map:
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 0000000000100000 - 00000000bff70000 (usable)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 00000000bff70000 - 00000000bff78000 (ACPI data)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 00000000bff78000 - 00000000bff80000 (ACPI NVS)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
Oct  4 10:32:43 m82 kernel:  BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
Oct  4 10:32:43 m82 kernel: No NUMA configuration found
Oct  4 10:32:43 m82 kernel: Faking a node at 0000000000000000-00000001c0000000
Oct  4 10:32:43 m82 kernel: Bootmem setup node 0 0000000000000000-00000001c0000000
Oct  4 10:32:43 m82 kernel: ACPI: PM-Timer IO Port: 0x1008
Oct  4 10:32:43 m82 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct  4 10:32:43 m82 kernel: Processor #0 15:4 APIC version 20
Oct  4 10:32:43 m82 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Oct  4 10:32:43 m82 kernel: Processor #6 15:4 APIC version 20
Oct  4 10:32:43 m82 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Oct  4 10:32:43 m82 kernel: Processor #1 15:4 APIC version 20
Oct  4 10:32:43 m82 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Oct  4 10:32:43 m82 kernel: Processor #7 15:4 APIC version 20
Oct  4 10:32:43 m82 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct  4 10:32:43 m82 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Oct  4 10:32:43 m82 kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Oct  4 10:32:43 m82 kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Oct  4 10:32:43 m82 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct  4 10:32:43 m82 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Oct  4 10:32:43 m82 kernel: ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
Oct  4 10:32:43 m82 kernel: IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
Oct  4 10:32:44 m82 kernel: ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
Oct  4 10:32:44 m82 kernel: IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
Oct  4 10:32:44 m82 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Oct  4 10:32:44 m82 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct  4 10:32:44 m82 kernel: Setting APIC routing to flat
Oct  4 10:32:44 m82 kernel: Using ACPI (MADT) for SMP configuration information
Oct  4 10:32:44 m82 kernel: Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
Oct  4 10:32:44 m82 kernel: Checking aperture...
Oct  4 10:32:44 m82 kernel: Built 1 zonelists
Oct  4 10:32:44 m82 kernel: Kernel command line: ro root=/dev/sda1 rhgb
Oct  4 10:32:44 m82 kernel: Initializing CPU#0
Oct  4 10:32:44 m82 kernel: PID hash table entries: 4096 (order: 12, 131072 bytes)
Oct  4 10:32:44 m82 kernel: time.c: Using 3.579545 MHz PM timer.
Oct  4 10:32:44 m82 kernel: time.c: Detected 3400.295 MHz processor.
Oct  4 10:32:44 m82 kernel: Console: colour VGA+ 80x25
Oct  4 10:32:44 m82 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Oct  4 10:32:44 m82 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Oct  4 10:32:44 m82 kernel: Placing software IO TLB between 0x7e5d000 - 0xbe5d000
Oct  4 10:32:44 m82 kernel: Memory: 6105160k/7340032k available (3441k kernel code, 185316k reserved, 2051k data, 224k init)
Oct  4 10:32:44 m82 kernel: Calibrating delay using timer specific routine.. 6806.66 BogoMIPS (lpj=3403331)
Oct  4 10:32:44 m82 kernel: Mount-cache hash table entries: 256
Oct  4 10:32:44 m82 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Oct  4 10:32:44 m82 kernel: CPU: L2 cache: 2048K
Oct  4 10:32:44 m82 kernel: using mwait in idle threads.
Oct  4 10:32:44 m82 kernel: CPU: Physical Processor ID: 0
Oct  4 10:32:44 m82 kernel: CPU0: Thermal monitoring enabled (TM1)
Oct  4 10:32:44 m82 kernel: mtrr: v2.0 (20020519)
Oct  4 10:32:44 m82 kernel: Using local APIC timer interrupts.
Oct  4 10:32:44 m82 kernel: Detected 12.501 MHz APIC timer.
Oct  4 10:32:44 m82 kernel: Booting processor 1/4 APIC 0x6
Oct  4 10:32:44 m82 kernel: Initializing CPU#1
Oct  4 10:32:44 m82 kernel: Calibrating delay using timer specific routine.. 6799.06 BogoMIPS (lpj=3399533)
Oct  4 10:32:44 m82 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Oct  4 10:32:44 m82 kernel: CPU: L2 cache: 2048K
Oct  4 10:32:44 m82 kernel: CPU: Physical Processor ID: 3
Oct  4 10:32:44 m82 kernel: CPU1: Thermal monitoring enabled (TM1)
Oct  4 10:32:44 m82 kernel:                   Intel(R) Xeon(TM) CPU 3.40GHz stepping 03
Oct  4 10:32:44 m82 kernel: CPU 1: Syncing TSC to CPU 0.
Oct  4 10:32:44 m82 kernel: CPU 1: synchronized TSC with CPU 0 (last diff -6 cycles, maxerr 1581 cycles)
Oct  4 10:32:44 m82 kernel: Booting processor 2/4 APIC 0x1
Oct  4 10:32:44 m82 kernel: Initializing CPU#2
Oct  4 10:32:44 m82 kernel: Calibrating delay using timer specific routine.. 6799.24 BogoMIPS (lpj=3399624)
Oct  4 10:32:44 m82 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Oct  4 10:32:44 m82 kernel: CPU: L2 cache: 2048K
Oct  4 10:32:44 m82 kernel: CPU: Physical Processor ID: 0
Oct  4 10:32:44 m82 kernel: CPU2: Thermal monitoring enabled (TM1)
Oct  4 10:32:44 m82 kernel:                   Intel(R) Xeon(TM) CPU 3.40GHz stepping 03
Oct  4 10:32:44 m82 kernel: CPU 2: Syncing TSC to CPU 0.
Oct  4 10:32:44 m82 kernel: CPU 2: synchronized TSC with CPU 0 (last diff -12 cycles, maxerr 867 cycles)
Oct  4 10:32:44 m82 kernel: Booting processor 3/4 APIC 0x7
Oct  4 10:32:44 m82 kernel: Initializing CPU#3
Oct  4 10:32:44 m82 kernel: Calibrating delay using timer specific routine.. 6799.42 BogoMIPS (lpj=3399711)
Oct  4 10:32:44 m82 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Oct  4 10:32:44 m82 kernel: CPU: L2 cache: 2048K
Oct  4 10:32:44 m82 kernel: CPU: Physical Processor ID: 3
Oct  4 10:32:44 m82 kernel: CPU3: Thermal monitoring enabled (TM1)
Oct  4 10:32:44 m82 kernel:                   Intel(R) Xeon(TM) CPU 3.40GHz stepping 03
Oct  4 10:32:44 m82 kernel: CPU 3: Syncing TSC to CPU 0.
Oct  4 10:32:44 m82 kernel: CPU 3: synchronized TSC with CPU 0 (last diff 77 cycles, maxerr 1581 cycles)
Oct  4 10:32:44 m82 kernel: Brought up 4 CPUs
Oct  4 10:32:44 m82 kernel: time.c: Using PIT/TSC based timekeeping.
Oct  4 10:32:44 m82 kernel: testing NMI watchdog ... OK.
Oct  4 10:32:44 m82 kernel: NET: Registered protocol family 16
Oct  4 10:32:44 m82 kernel: ACPI: bus type pci registered
Oct  4 10:32:44 m82 kernel: PCI: Using configuration type 1
Oct  4 10:32:44 m82 kernel: PCI: Using MMCONFIG at e0000000
Oct  4 10:32:44 m82 kernel: ACPI: Subsystem revision 20050902
Oct  4 10:32:44 m82 kernel: ACPI: Interpreter enabled
Oct  4 10:32:44 m82 kernel: ACPI: Using IOAPIC for interrupt routing
Oct  4 10:32:44 m82 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct  4 10:32:44 m82 kernel: PCI: Probing PCI hardware (bus 00)
Oct  4 10:32:44 m82 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Oct  4 10:32:44 m82 kernel: PCI: PXH quirk detected, disabling MSI for SHPC device
Oct  4 10:32:44 m82 kernel: PCI: PXH quirk detected, disabling MSI for SHPC device
Oct  4 10:32:44 m82 kernel: PCI: Transparent bridge - 0000:00:1e.0
Oct  4 10:32:44 m82 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
Oct  4 10:32:44 m82 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
Oct  4 10:32:44 m82 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
Oct  4 10:32:44 m82 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
Oct  4 10:32:44 m82 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Oct  4 10:32:44 m82 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
Oct  4 10:32:45 m82 kernel: ACPI: Device [PRT] status [0000000c]: functional but not present; setting present
Oct  4 10:32:45 m82 kernel: SCSI subsystem initialized
Oct  4 10:32:45 m82 kernel: usbcore: registered new driver usbfs
Oct  4 10:32:45 m82 kernel: usbcore: registered new driver hub
Oct  4 10:32:45 m82 kernel: PCI: Using ACPI for IRQ routing
Oct  4 10:32:45 m82 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Oct  4 10:32:45 m82 kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Oct  4 10:32:45 m82 kernel: PCI: Bridge: 0000:01:00.0
Oct  4 10:32:45 m82 kernel:   IO window: 2000-2fff
Oct  4 10:32:45 m82 kernel:   MEM window: dd200000-dd2fffff
Oct  4 10:32:45 m82 kernel:   PREFETCH window: c2000000-c20fffff
Oct  4 10:32:45 m82 kernel: PCI: Bridge: 0000:01:00.2
Oct  4 10:32:45 m82 kernel:   IO window: 3000-3fff
Oct  4 10:32:45 m82 kernel:   MEM window: dd300000-dd3fffff
Oct  4 10:32:45 m82 kernel:   PREFETCH window: disabled.
Oct  4 10:32:45 m82 kernel: PCI: Bridge: 0000:00:02.0
Oct  4 10:32:45 m82 kernel:   IO window: 2000-3fff
Oct  4 10:32:45 m82 kernel:   MEM window: dd100000-dd3fffff
Oct  4 10:32:45 m82 kernel:   PREFETCH window: c2000000-c20fffff
Oct  4 10:32:45 m82 kernel: PCI: Bridge: 0000:00:04.0
Oct  4 10:32:45 m82 kernel:   IO window: disabled.
Oct  4 10:32:45 m82 kernel:   MEM window: disabled.
Oct  4 10:32:45 m82 kernel:   PREFETCH window: disabled.
Oct  4 10:32:45 m82 kernel: PCI: Bridge: 0000:00:06.0
Oct  4 10:32:45 m82 kernel:   IO window: disabled.
Oct  4 10:32:45 m82 kernel:   MEM window: disabled.
Oct  4 10:32:45 m82 kernel:   PREFETCH window: disabled.
Oct  4 10:32:45 m82 kernel: PCI: Bridge: 0000:00:1e.0
Oct  4 10:32:45 m82 kernel:   IO window: 4000-4fff
Oct  4 10:32:45 m82 kernel:   MEM window: dd400000-deffffff
Oct  4 10:32:45 m82 kernel:   PREFETCH window: c2100000-c21fffff
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct  4 10:32:45 m82 kernel: Simple Boot Flag at 0x39 set to 0x1
Oct  4 10:32:45 m82 kernel: IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Oct  4 10:32:45 m82 kernel: IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Oct  4 10:32:45 m82 kernel: audit: initializing netlink socket (disabled)
Oct  4 10:32:45 m82 kernel: audit(1128414700.536:1): initialized
Oct  4 10:32:45 m82 kernel: Total HugeTLB memory allocated, 0
Oct  4 10:32:45 m82 kernel: VFS: Disk quotas dquot_6.5.1
Oct  4 10:32:45 m82 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct  4 10:32:45 m82 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct  4 10:32:45 m82 kernel: Initializing Cryptographic API
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct  4 10:32:45 m82 kernel: ACPI: Power Button (FF) [PWRF]
Oct  4 10:32:45 m82 kernel: ACPI: Power Button (CM) [PWRB]
Oct  4 10:32:45 m82 kernel: ACPI: CPU0 (power states: C1[C1])
Oct  4 10:32:45 m82 kernel: ACPI: CPU1 (power states: C1[C1])
Oct  4 10:32:45 m82 kernel: ACPI: CPU2 (power states: C1[C1])
Oct  4 10:32:45 m82 kernel: ACPI: CPU3 (power states: C1[C1])
Oct  4 10:32:45 m82 kernel: Real Time Clock Driver v1.12
Oct  4 10:32:45 m82 kernel: hw_random: RNG not detected
Oct  4 10:32:45 m82 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Oct  4 10:32:45 m82 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct  4 10:32:45 m82 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct  4 10:32:45 m82 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled
Oct  4 10:32:45 m82 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct  4 10:32:45 m82 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct  4 10:32:45 m82 kernel: io scheduler noop registered
Oct  4 10:32:45 m82 kernel: io scheduler anticipatory registered
Oct  4 10:32:45 m82 kernel: io scheduler deadline registered
Oct  4 10:32:45 m82 kernel: io scheduler cfq registered
Oct  4 10:32:45 m82 kernel: Floppy drive(s): fd0 is 1.44M
Oct  4 10:32:45 m82 kernel: FDC 0 is a National Semiconductor PC87306
Oct  4 10:32:45 m82 kernel: loop: loaded (max 8 devices)
Oct  4 10:32:45 m82 kernel: Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI
Oct  4 10:32:45 m82 kernel: Copyright (c) 1999-2005 Intel Corporation.
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 54 (level, low) -> IRQ 177
Oct  4 10:32:45 m82 kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt 0000:03:02.1[B] -> GSI 55 (level, low) -> IRQ 185
Oct  4 10:32:45 m82 kernel: e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
Oct  4 10:32:45 m82 kernel: tun: Universal TUN/TAP device driver, 1.6
Oct  4 10:32:45 m82 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Oct  4 10:32:45 m82 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct  4 10:32:45 m82 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct  4 10:32:45 m82 kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
Oct  4 10:32:45 m82 kernel: ICH5: chipset revision 2
Oct  4 10:32:45 m82 kernel: ICH5: not 100% native mode: will probe irqs later
Oct  4 10:32:45 m82 kernel:     ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:pio, hdb:pio
Oct  4 10:32:45 m82 kernel:     ide1: BM-DMA at 0x14a8-0x14af, BIOS settings: hdc:pio, hdd:DMA
Oct  4 10:32:45 m82 kernel: hdd: MATSHITADVD-ROM SR-8178, ATAPI CD/DVD-ROM drive
Oct  4 10:32:45 m82 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct  4 10:32:45 m82 kernel: hdd: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Oct  4 10:32:45 m82 kernel: Uniform CD-ROM driver Revision: 3.20
Oct  4 10:32:45 m82 kernel: ide-floppy driver 0.99.newide
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 32 (level, low) -> IRQ 201
Oct  4 10:32:45 m82 kernel: scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
Oct  4 10:32:45 m82 kernel:         <Adaptec AIC7902 Ultra320 SCSI adapter>
Oct  4 10:32:45 m82 kernel:         aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
Oct  4 10:32:45 m82 kernel: 
Oct  4 10:32:45 m82 kernel:   Vendor: SEAGATE   Model: ST373207LC        Rev: 0003
Oct  4 10:32:45 m82 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Oct  4 10:32:45 m82 kernel:  target0:0:0: asynchronous.
Oct  4 10:32:45 m82 kernel: scsi0:A:0:0: Tagged Queuing enabled.  Depth 4
Oct  4 10:32:45 m82 kernel:  target0:0:0: Beginning Domain Validation
Oct  4 10:32:45 m82 kernel:  target0:0:0: wide asynchronous.
Oct  4 10:32:45 m82 kernel:  target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
Oct  4 10:32:45 m82 kernel:  target0:0:0: Ending Domain Validation
Oct  4 10:32:45 m82 kernel:   Vendor: SUPER     Model: GEM318            Rev: 0   
Oct  4 10:32:45 m82 kernel:   Type:   Processor                          ANSI SCSI revision: 02
Oct  4 10:32:45 m82 kernel:  target0:0:6: asynchronous.
Oct  4 10:32:45 m82 kernel:  target0:0:6: Beginning Domain Validation
Oct  4 10:32:45 m82 kernel:  target0:0:6: Ending Domain Validation
Oct  4 10:32:45 m82 kernel: ACPI: PCI Interrupt 0000:02:02.1[B] -> GSI 33 (level, low) -> IRQ 209
Oct  4 10:32:45 m82 kernel: scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
Oct  4 10:32:45 m82 kernel:         <Adaptec AIC7902 Ultra320 SCSI adapter>
Oct  4 10:32:45 m82 kernel:         aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
Oct  4 10:32:45 m82 kernel: 
Oct  4 10:32:46 m82 kernel:   Vendor: VP-1252-  Model: FB951223-VOL#00   Rev: R001
Oct  4 10:32:46 m82 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Oct  4 10:32:46 m82 kernel:  target1:0:0: asynchronous.
Oct  4 10:32:46 m82 kernel: scsi1:A:0:0: Tagged Queuing enabled.  Depth 4
Oct  4 10:32:46 m82 kernel:  target1:0:0: Beginning Domain Validation
Oct  4 10:32:46 m82 kernel:  target1:0:0: wide asynchronous.
Oct  4 10:32:46 m82 kernel:  target1:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
Oct  4 10:32:46 m82 kernel:  target1:0:0: Ending Domain Validation
Oct  4 10:32:46 m82 kernel:   Vendor: VP-1252-  Model: FB951223-VOL#01   Rev: R001
Oct  4 10:32:46 m82 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Oct  4 10:32:46 m82 kernel: scsi1:A:0:1: Tagged Queuing enabled.  Depth 4
Oct  4 10:32:46 m82 kernel: st: Version 20050830, fixed bufsize 32768, s/g segs 256
Oct  4 10:32:46 m82 kernel: SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB)
Oct  4 10:32:46 m82 kernel: SCSI device sda: drive cache: write back
Oct  4 10:32:46 m82 kernel: SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB)
Oct  4 10:32:46 m82 kernel: SCSI device sda: drive cache: write back
Oct  4 10:32:46 m82 kernel:  sda: sda1 sda2 sda3 sda4
Oct  4 10:32:46 m82 kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Oct  4 10:32:46 m82 kernel: SCSI device sdb: 3906247680 512-byte hdwr sectors (1999999 MB)
Oct  4 10:32:46 m82 kernel: SCSI device sdb: drive cache: write back
Oct  4 10:32:46 m82 kernel: SCSI device sdb: 3906247680 512-byte hdwr sectors (1999999 MB)
Oct  4 10:32:46 m82 kernel: SCSI device sdb: drive cache: write back
Oct  4 10:32:46 m82 kernel:  sdb: sdb1
Oct  4 10:32:46 m82 kernel: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Oct  4 10:32:46 m82 kernel: SCSI device sdc: 3906242560 512-byte hdwr sectors (1999996 MB)
Oct  4 10:32:46 m82 kernel: SCSI device sdc: drive cache: write back
Oct  4 10:32:46 m82 kernel: SCSI device sdc: 3906242560 512-byte hdwr sectors (1999996 MB)
Oct  4 10:32:46 m82 kernel: SCSI device sdc: drive cache: write back
Oct  4 10:32:46 m82 kernel:  sdc: sdc1
Oct  4 10:32:46 m82 kernel: Attached scsi disk sdc at scsi1, channel 0, id 0, lun 1
Oct  4 10:32:46 m82 kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Oct  4 10:32:46 m82 kernel: Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0,  type 3
Oct  4 10:32:46 m82 kernel: Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0,  type 0
Oct  4 10:32:46 m82 kernel: Attached scsi generic sg3 at scsi1, channel 0, id 0, lun 1,  type 0
Oct  4 10:32:47 m82 kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 217
Oct  4 10:32:48 m82 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Oct  4 10:32:48 m82 kernel: ehci_hcd 0000:00:1d.7: debug port 1
Oct  4 10:32:48 m82 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Oct  4 10:32:48 m82 kernel: ehci_hcd 0000:00:1d.7: irq 217, io mem 0xdd000000
Oct  4 10:32:48 m82 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Oct  4 10:32:48 m82 kernel: hub 1-0:1.0: USB hub found
Oct  4 10:32:48 m82 kernel: hub 1-0:1.0: 8 ports detected
Oct  4 10:32:48 m82 kernel: USB Universal Host Controller Interface driver v2.3
Oct  4 10:32:48 m82 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001400
Oct  4 10:32:48 m82 kernel: hub 2-0:1.0: USB hub found
Oct  4 10:32:48 m82 kernel: hub 2-0:1.0: 2 ports detected
Oct  4 10:32:48 m82 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.1: irq 225, io base 0x00001420
Oct  4 10:32:48 m82 kernel: hub 3-0:1.0: USB hub found
Oct  4 10:32:48 m82 kernel: hub 3-0:1.0: 2 ports detected
Oct  4 10:32:48 m82 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.2: irq 193, io base 0x00001440
Oct  4 10:32:48 m82 kernel: hub 4-0:1.0: USB hub found
Oct  4 10:32:48 m82 kernel: hub 4-0:1.0: 2 ports detected
Oct  4 10:32:48 m82 kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Oct  4 10:32:48 m82 kernel: uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001460
Oct  4 10:32:48 m82 kernel: hub 5-0:1.0: USB hub found
Oct  4 10:32:48 m82 kernel: hub 5-0:1.0: 2 ports detected
Oct  4 10:32:48 m82 kernel: Initializing USB Mass Storage driver...
Oct  4 10:32:48 m82 kernel: usbcore: registered new driver usb-storage
Oct  4 10:32:48 m82 kernel: USB Mass Storage support registered.
Oct  4 10:32:48 m82 kernel: usbcore: registered new driver hiddev
Oct  4 10:32:48 m82 kernel: usbcore: registered new driver usbhid
Oct  4 10:32:48 m82 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Oct  4 10:32:48 m82 kernel: mice: PS/2 mouse device common for all mice
Oct  4 10:32:48 m82 kernel: i2c /dev entries driver
Oct  4 10:32:48 m82 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Oct  4 10:32:48 m82 kernel: i2c_adapter i2c-0: Unsupported chip (man_id=0x01, chip_id=0x73).
Oct  4 10:32:48 m82 kernel: i2c_adapter i2c-0: detect fail: address match, 0x2e
Oct  4 10:32:49 m82 kernel: hdaps: supported laptop not found!
Oct  4 10:32:49 m82 kernel: hdaps: driver init failed (ret=-6)!
Oct  4 10:32:49 m82 kernel: Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6eb1, caps: 0xa84793/0x554755
Oct  4 10:32:49 m82 kernel: serio: Synaptics pass-through port at isa0060/serio1/input0
Oct  4 10:32:49 m82 kernel: input: SynPS/2 Synaptics TouchPad on isa0060/serio1
Oct  4 10:32:49 m82 kernel: pc87360: PC8736x not detected, module not inserted.
Oct  4 10:32:49 m82 kernel: NET: Registered protocol family 2
Oct  4 10:32:49 m82 kernel: IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
Oct  4 10:32:49 m82 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Oct  4 10:32:49 m82 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct  4 10:32:49 m82 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Oct  4 10:32:49 m82 kernel: TCP reno registered
Oct  4 10:32:49 m82 kernel: ip_conntrack version 2.3 (8192 buckets, 65536 max) - 344 bytes per conntrack
Oct  4 10:32:49 m82 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Oct  4 10:32:49 m82 kernel: ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
Oct  4 10:32:49 m82 kernel: ClusterIP Version 0.8 loaded successfully
Oct  4 10:32:49 m82 kernel: arp_tables: (C) 2002 David S. Miller
Oct  4 10:32:49 m82 kernel: TCP bic registered
Oct  4 10:32:49 m82 kernel: Initializing IPsec netlink socket
Oct  4 10:32:49 m82 kernel: NET: Registered protocol family 1
Oct  4 10:32:49 m82 kernel: NET: Registered protocol family 17
Oct  4 10:32:49 m82 kernel: NET: Registered protocol family 15
Oct  4 10:32:49 m82 kernel: ReiserFS: sda1: found reiserfs format "3.6" with standard journal
Oct  4 10:32:49 m82 kernel: ReiserFS: sda1: using ordered data mode
Oct  4 10:32:49 m82 kernel: ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct  4 10:32:49 m82 kernel: ReiserFS: sda1: checking transaction log (sda1)
Oct  4 10:32:49 m82 kernel: ReiserFS: sda1: Using r5 hash to sort names
Oct  4 10:32:49 m82 kernel: VFS: Mounted root (reiserfs filesystem) readonly.
Oct  4 10:32:49 m82 kernel: Freeing unused kernel memory: 224k freed
Oct  4 10:32:49 m82 kernel: kmodule[1398]: segfault at ffffffffffffffff rip 0000003257d70313 rsp 00007fffffc4c288 error 4
Oct  4 10:32:49 m82 kernel: ReiserFS: sda4: found reiserfs format "3.6" with standard journal
Oct  4 10:32:49 m82 kernel: ReiserFS: sda4: using ordered data mode
Oct  4 10:32:49 m82 kernel: ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct  4 10:32:49 m82 kernel: ReiserFS: sda4: checking transaction log (sda4)
Oct  4 10:32:49 m82 kernel: ReiserFS: sda4: Using r5 hash to sort names
Oct  4 10:32:49 m82 kernel: ReiserFS: sda2: found reiserfs format "3.6" with standard journal
Oct  4 10:32:49 m82 kernel: ReiserFS: sda2: using ordered data mode
Oct  4 10:32:49 m82 kernel: ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct  4 10:32:49 m82 kernel: ReiserFS: sda2: checking transaction log (sda2)
Oct  4 10:32:49 m82 kernel: ReiserFS: sda2: Using r5 hash to sort names
Oct  4 10:32:49 m82 kernel: Adding 1959920k swap on /dev/sda3.  Priority:-1 extents:1 across:1959920k
Oct  4 10:32:49 m82 kernel: e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
Oct  4 10:34:41 m82 kernel: ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
Oct  4 10:35:25 m82 kernel: ReiserFS: sdb1: using ordered data mode
Oct  4 10:35:25 m82 kernel: ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct  4 10:35:25 m82 kernel: ReiserFS: sdb1: checking transaction log (sdb1)
Oct  4 10:35:25 m82 kernel: ReiserFS: sdb1: Using r5 hash to sort names
Oct  4 10:35:39 m82 kernel: ReiserFS: sdc1: found reiserfs format "3.6" with standard journal
Oct  4 10:36:26 m82 kernel: ReiserFS: sdc1: using ordered data mode
Oct  4 10:36:26 m82 kernel: ReiserFS: sdc1: journal params: device sdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct  4 10:36:26 m82 kernel: ReiserFS: sdc1: checking transaction log (sdc1)
Oct  4 10:36:26 m82 kernel: ReiserFS: sdc1: Using r5 hash to sort names

Re: Infinite interrupt loop, INTSTAT = 0

[James Bottomley]

On Tue, 2005-10-04 at 10:45 +0200, Olivier Galibert wrote:
> > But anyway, let's proceed on the theory that the array is having a hard
> > time.  What I need you to do is lower the speed of the array target in
> > the aic bios.  Unfortunately, the driver won't honour that setting at
> > the moment:  I'll see if I can work up the code that will do it.  The
> > attached patch will perform this artificially (for every device on every
> > aic79xx).
> 
> The mounts worked with your patch.  I'm going to start actually using
> the raid, that's going to tell us how stable it actually is.  I have
> no problems with doing other tests.

OK, that sort of confirms the theory that there's a bad interaction at
u320.  What I'll try to do is to implement the bios parameter routines
for the aic79xx and you can set it to u160 in the bios.  Since I can't
test this, would you be a guinea pig when I come up with it?

James

Re: Infinite interrupt loop, INTSTAT = 0

[Olivier Galibert]

On Tue, Oct 04, 2005 at 09:23:01AM -0400, James Bottomley wrote:
> OK, that sort of confirms the theory that there's a bad interaction at
> u320.  What I'll try to do is to implement the bios parameter routines
> for the aic79xx and you can set it to u160 in the bios.  Since I can't
> test this, would you be a guinea pig when I come up with it?

No problem.

  OG.