* please pull from the trivial tree
@ 2006-01-15 2:05 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-01-15 2:05 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Andrew Morton, linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following changes:
Adrian Bunk:
ftape: remove some outdated information from Kconfig files
drivers/net/{,wireless/}Kconfig: remove dead URL
spelling: s/appropiate/appropriate/
SOFTWARE_SUSPEND: fix a typo in the dependencies
Alex Shepard:
Spelling fix in IPW2100 and IPW2200 Kconfig entries
Alexey Dobriyan:
Fix "stuct", "strut", "struc" typos
Christian Kujau:
correct email address of Manfred Spraul
Domen Puncer:
remove unused LOCAL_END_REQUEST
Horms:
MAINTAINERS: better list for "POSIX CLOCKS and TIMERS"
Jesper Juhl:
return statement cleanup - kill pointless parentheses
Spelling fix in init/Kconfig for the help of CONFIG_SWAP
MAINTAINERS: CIFS: add linux-cifs-client@lists.samba.org list
Randy Dunlap:
Documentation/hpet.txt typo
Documentation/DocBook/videobook.tmpl | 4
Documentation/cachetlb.txt | 2
Documentation/hpet.txt | 2
Documentation/input/ff.txt | 2
Documentation/ioctl/hdio.txt | 2
Documentation/laptop-mode.txt | 2
Documentation/networking/sk98lin.txt | 2
Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 2
Documentation/x86_64/boot-options.txt | 2
MAINTAINERS | 3
arch/i386/kernel/vm86.c | 2
arch/um/include/sysdep-i386/checksum.h | 4
drivers/block/floppy.c | 1
drivers/char/Kconfig | 10
drivers/char/ftape/Kconfig | 12
drivers/char/stallion.c | 128 +++++-----
drivers/net/Kconfig | 4
drivers/net/wan/lmc/lmc_main.c | 2
drivers/net/wireless/Kconfig | 8
drivers/s390/scsi/zfcp_erp.c | 2
drivers/scsi/FlashPoint.c | 2
drivers/scsi/gdth.c | 2
fs/efs/super.c | 5
fs/sysv/ChangeLog | 2
fs/xfs/quota/xfs_qm.c | 114 ++++----
fs/xfs/xfs_dir_leaf.c | 96 +++----
fs/xfs/xfs_fsops.c | 4
fs/xfs/xfs_log.c | 52 ++--
fs/xfs/xfs_mount.c | 66 ++---
fs/xfs/xfs_trans_item.c | 22 -
fs/xfs/xfs_vnodeops.c | 59 ++--
include/asm-v850/ptrace.h | 2
include/linux/pfkeyv2.h | 2
init/Kconfig | 2
ipc/msg.c | 2
ipc/sem.c | 2
ipc/util.c | 2
ipc/util.h | 2
kernel/power/Kconfig | 2
kernel/printk.c | 2
sound/oss/opl3sa2.c | 2
41 files changed, 306 insertions(+), 334 deletions(-)
diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl
index 3ec6c87..fdff984 100644
--- a/Documentation/DocBook/videobook.tmpl
+++ b/Documentation/DocBook/videobook.tmpl
@@ -229,7 +229,7 @@ int __init myradio_init(struct video_ini
static int users = 0;
-static int radio_open(stuct video_device *dev, int flags)
+static int radio_open(struct video_device *dev, int flags)
{
if(users)
return -EBUSY;
@@ -949,7 +949,7 @@ int __init mycamera_init(struct video_in
static int users = 0;
-static int camera_open(stuct video_device *dev, int flags)
+static int camera_open(struct video_device *dev, int flags)
{
if(users)
return -EBUSY;
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index 7eb715e..4ae4188 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -136,7 +136,7 @@ changes occur:
8) void lazy_mmu_prot_update(pte_t pte)
This interface is called whenever the protection on
any user PTEs change. This interface provides a notification
- to architecture specific code to take appropiate action.
+ to architecture specific code to take appropriate action.
Next, we have the cache flushing interfaces. In general, when Linux
diff --git a/Documentation/hpet.txt b/Documentation/hpet.txt
index e524575..b7a3dc3 100644
--- a/Documentation/hpet.txt
+++ b/Documentation/hpet.txt
@@ -2,7 +2,7 @@
The High Precision Event Timer (HPET) hardware is the future replacement
for the 8254 and Real Time Clock (RTC) periodic timer functionality.
-Each HPET can have up two 32 timers. It is possible to configure the
+Each HPET can have up to 32 timers. It is possible to configure the
first two timers as legacy replacements for 8254 and RTC periodic timers.
A specification done by Intel and Microsoft can be found at
<http://www.intel.com/hardwaredesign/hpetspec.htm>.
diff --git a/Documentation/input/ff.txt b/Documentation/input/ff.txt
index efa7dd6..c7e10ea 100644
--- a/Documentation/input/ff.txt
+++ b/Documentation/input/ff.txt
@@ -120,7 +120,7 @@ to the unique id assigned by the driver.
some operations (removing an effect, controlling the playback).
This if field must be set to -1 by the user in order to tell the driver to
allocate a new effect.
-See <linux/input.h> for a description of the ff_effect stuct. You should also
+See <linux/input.h> for a description of the ff_effect struct. You should also
find help in a few sketches, contained in files shape.fig and interactive.fig.
You need xfig to visualize these files.
diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.txt
index 9a7aea0..11c9be4 100644
--- a/Documentation/ioctl/hdio.txt
+++ b/Documentation/ioctl/hdio.txt
@@ -946,7 +946,7 @@ HDIO_SCAN_HWIF register and (re)scan i
This ioctl initializes the addresses and irq for a disk
controller, probes for drives, and creates /proc/ide
- interfaces as appropiate.
+ interfaces as appropriate.
diff --git a/Documentation/laptop-mode.txt b/Documentation/laptop-mode.txt
index f42e4c0..b18e216 100644
--- a/Documentation/laptop-mode.txt
+++ b/Documentation/laptop-mode.txt
@@ -357,7 +357,7 @@ MAX_AGE=${MAX_AGE:-'600'}
# Read-ahead, in kilobytes
READAHEAD=${READAHEAD:-'4096'}
-# Shall we remount journaled fs. with appropiate commit interval? (1=yes)
+# Shall we remount journaled fs. with appropriate commit interval? (1=yes)
DO_REMOUNTS=${DO_REMOUNTS:-'1'}
# And shall we add the "noatime" option to that as well? (1=yes)
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
index f9d979e..7837c53 100644
--- a/Documentation/networking/sk98lin.txt
+++ b/Documentation/networking/sk98lin.txt
@@ -91,7 +91,7 @@ To use the driver as a module, proceed a
with (M)
5. Execute the command "make modules".
6. Execute the command "make modules_install".
- The appropiate modules will be installed.
+ The appropriate modules will be installed.
7. Reboot your system.
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 4963d83..e651ed8 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -5577,7 +5577,7 @@ struct _snd_pcm_runtime {
<informalexample>
<programlisting>
<![CDATA[
- static int mychip_suspend(strut pci_dev *pci, pm_message_t state)
+ static int mychip_suspend(struct pci_dev *pci, pm_message_t state)
{
/* (1) */
struct snd_card *card = pci_get_drvdata(pci);
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 72ab9b9..9c5fc15 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -198,6 +198,6 @@ Debugging
Misc
- noreplacement Don't replace instructions with more appropiate ones
+ noreplacement Don't replace instructions with more appropriate ones
for the CPU. This may be useful on asymmetric MP systems
where some CPU have less capabilities than the others.
diff --git a/MAINTAINERS b/MAINTAINERS
index 71693c5..873c3f7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -549,6 +549,7 @@ S: Maintained
COMMON INTERNET FILE SYSTEM (CIFS)
P: Steve French
M: sfrench@samba.org
+L: linux-cifs-client@lists.samba.org
L: samba-technical@lists.samba.org
W: http://us1.samba.org/samba/Linux_CIFS_client.html
T: git kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git
@@ -2053,7 +2054,7 @@ S: Maintained
POSIX CLOCKS and TIMERS
P: George Anzinger
M: george@mvista.com
-L: netdev@vger.kernel.org
+L: linux-kernel@vger.kernel.org
S: Supported
POWERPC 4xx EMAC DRIVER
diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c
index 0c90ae5..f51c894 100644
--- a/arch/i386/kernel/vm86.c
+++ b/arch/i386/kernel/vm86.c
@@ -4,7 +4,7 @@
* Copyright (C) 1994 Linus Torvalds
*
* 29 dec 2001 - Fixed oopses caused by unchecked access to the vm86
- * stack - Manfred Spraul <manfreds@colorfullife.com>
+ * stack - Manfred Spraul <manfred@colorfullife.com>
*
* 22 mar 2002 - Manfred detected the stackfaults, but didn't handle
* them correctly. Now the emulation will be in a
diff --git a/arch/um/include/sysdep-i386/checksum.h b/arch/um/include/sysdep-i386/checksum.h
index 764ba4d..7d3d202 100644
--- a/arch/um/include/sysdep-i386/checksum.h
+++ b/arch/um/include/sysdep-i386/checksum.h
@@ -36,7 +36,7 @@ unsigned int csum_partial_copy_nocheck(c
int len, int sum)
{
memcpy(dst, src, len);
- return(csum_partial(dst, len, sum));
+ return csum_partial(dst, len, sum);
}
/*
@@ -104,7 +104,7 @@ static inline unsigned short ip_fast_csu
: "=r" (sum), "=r" (iph), "=r" (ihl)
: "1" (iph), "2" (ihl)
: "memory");
- return(sum);
+ return sum;
}
/*
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 374621a..d23b543 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -242,7 +242,6 @@ static int allowed_drive_mask = 0x33;
static int irqdma_allocated;
-#define LOCAL_END_REQUEST
#define DEVICE_NAME "floppy"
#include <linux/blkdev.h>
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index d6fcd0a..4135d8c 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -881,16 +881,6 @@ config FTAPE
module. To compile this driver as a module, choose M here: the
module will be called ftape.
- Note that the Ftape-HOWTO is out of date (sorry) and documents the
- older version 2.08 of this software but still contains useful
- information. There is a web page with more recent documentation at
- <http://www.instmath.rwth-aachen.de/~heine/ftape/>. This page
- always contains the latest release of the ftape driver and useful
- information (backup software, ftape related patches and
- documentation, FAQ). Note that the file system interface has
- changed quite a bit compared to previous versions of ftape. Please
- read <file:Documentation/ftape.txt>.
-
source "drivers/char/ftape/Kconfig"
endmenu
diff --git a/drivers/char/ftape/Kconfig b/drivers/char/ftape/Kconfig
index 7d3ecb5..0d65189 100644
--- a/drivers/char/ftape/Kconfig
+++ b/drivers/char/ftape/Kconfig
@@ -25,17 +25,7 @@ config ZFTAPE
support", above) then `zft-compressor' will be loaded
automatically by zftape when needed.
- Despite its name, zftape does NOT use compression by default. The
- file <file:Documentation/ftape.txt> contains a short description of
- the most important changes in the file system interface compared to
- previous versions of ftape. The ftape home page
- <http://www.instmath.rwth-aachen.de/~heine/ftape/> contains
- further information.
-
- IMPORTANT NOTE: zftape can read archives created by previous
- versions of ftape and provide file mark support (i.e. fast skipping
- between tape archives) but previous version of ftape will lack file
- mark support when reading archives produced by zftape.
+ Despite its name, zftape does NOT use compression by default.
config ZFT_DFLT_BLK_SZ
int "Default block size"
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 0e20780..bdaab69 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -738,7 +738,7 @@ static int __init stallion_module_init(v
stl_init();
restore_flags(flags);
- return(0);
+ return 0;
}
/*****************************************************************************/
@@ -889,7 +889,7 @@ static unsigned long stl_atol(char *str)
}
val = (val * base) + c;
}
- return(val);
+ return val;
}
/*****************************************************************************/
@@ -908,7 +908,7 @@ static int stl_parsebrd(stlconf_t *confp
#endif
if ((argp[0] == (char *) NULL) || (*argp[0] == 0))
- return(0);
+ return 0;
for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++)
*sp = TOLOWER(*sp);
@@ -935,7 +935,7 @@ static int stl_parsebrd(stlconf_t *confp
}
if ((argp[i] != (char *) NULL) && (*argp[i] != 0))
confp->irq = stl_atol(argp[i]);
- return(1);
+ return 1;
}
/*****************************************************************************/
@@ -946,7 +946,7 @@ static int stl_parsebrd(stlconf_t *confp
static void *stl_memalloc(int len)
{
- return((void *) kmalloc(len, GFP_KERNEL));
+ return (void *) kmalloc(len, GFP_KERNEL);
}
/*****************************************************************************/
@@ -963,12 +963,12 @@ static stlbrd_t *stl_allocbrd(void)
if (brdp == (stlbrd_t *) NULL) {
printk("STALLION: failed to allocate memory (size=%d)\n",
sizeof(stlbrd_t));
- return((stlbrd_t *) NULL);
+ return (stlbrd_t *) NULL;
}
memset(brdp, 0, sizeof(stlbrd_t));
brdp->magic = STL_BOARDMAGIC;
- return(brdp);
+ return brdp;
}
/*****************************************************************************/
@@ -988,10 +988,10 @@ static int stl_open(struct tty_struct *t
minordev = tty->index;
brdnr = MINOR2BRD(minordev);
if (brdnr >= stl_nrbrds)
- return(-ENODEV);
+ return -ENODEV;
brdp = stl_brds[brdnr];
if (brdp == (stlbrd_t *) NULL)
- return(-ENODEV);
+ return -ENODEV;
minordev = MINOR2PORT(minordev);
for (portnr = -1, panelnr = 0; (panelnr < STL_MAXPANELS); panelnr++) {
if (brdp->panels[panelnr] == (stlpanel_t *) NULL)
@@ -1003,11 +1003,11 @@ static int stl_open(struct tty_struct *t
minordev -= brdp->panels[panelnr]->nrports;
}
if (portnr < 0)
- return(-ENODEV);
+ return -ENODEV;
portp = brdp->panels[panelnr]->ports[portnr];
if (portp == (stlport_t *) NULL)
- return(-ENODEV);
+ return -ENODEV;
/*
* On the first open of the device setup the port hardware, and
@@ -1021,7 +1021,7 @@ static int stl_open(struct tty_struct *t
if (portp->tx.buf == (char *) NULL) {
portp->tx.buf = (char *) stl_memalloc(STL_TXBUFSIZE);
if (portp->tx.buf == (char *) NULL)
- return(-ENOMEM);
+ return -ENOMEM;
portp->tx.head = portp->tx.buf;
portp->tx.tail = portp->tx.buf;
}
@@ -1043,8 +1043,8 @@ static int stl_open(struct tty_struct *t
if (portp->flags & ASYNC_CLOSING) {
interruptible_sleep_on(&portp->close_wait);
if (portp->flags & ASYNC_HUP_NOTIFY)
- return(-EAGAIN);
- return(-ERESTARTSYS);
+ return -EAGAIN;
+ return -ERESTARTSYS;
}
/*
@@ -1054,11 +1054,11 @@ static int stl_open(struct tty_struct *t
*/
if (!(filp->f_flags & O_NONBLOCK)) {
if ((rc = stl_waitcarrier(portp, filp)) != 0)
- return(rc);
+ return rc;
}
portp->flags |= ASYNC_NORMAL_ACTIVE;
- return(0);
+ return 0;
}
/*****************************************************************************/
@@ -1115,7 +1115,7 @@ static int stl_waitcarrier(stlport_t *po
portp->openwaitcnt--;
restore_flags(flags);
- return(rc);
+ return rc;
}
/*****************************************************************************/
@@ -1211,12 +1211,12 @@ static int stl_write(struct tty_struct *
if ((tty == (struct tty_struct *) NULL) ||
(stl_tmpwritebuf == (char *) NULL))
- return(0);
+ return 0;
portp = tty->driver_data;
if (portp == (stlport_t *) NULL)
- return(0);
+ return 0;
if (portp->tx.buf == (char *) NULL)
- return(0);
+ return 0;
/*
* If copying direct from user space we must cater for page faults,
@@ -1255,7 +1255,7 @@ static int stl_write(struct tty_struct *
clear_bit(ASYI_TXLOW, &portp->istate);
stl_startrxtx(portp, -1, 1);
- return(count);
+ return count;
}
/*****************************************************************************/
@@ -1336,16 +1336,16 @@ static int stl_writeroom(struct tty_stru
#endif
if (tty == (struct tty_struct *) NULL)
- return(0);
+ return 0;
portp = tty->driver_data;
if (portp == (stlport_t *) NULL)
- return(0);
+ return 0;
if (portp->tx.buf == (char *) NULL)
- return(0);
+ return 0;
head = portp->tx.head;
tail = portp->tx.tail;
- return((head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1));
+ return ((head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1));
}
/*****************************************************************************/
@@ -1370,19 +1370,19 @@ static int stl_charsinbuffer(struct tty_
#endif
if (tty == (struct tty_struct *) NULL)
- return(0);
+ return 0;
portp = tty->driver_data;
if (portp == (stlport_t *) NULL)
- return(0);
+ return 0;
if (portp->tx.buf == (char *) NULL)
- return(0);
+ return 0;
head = portp->tx.head;
tail = portp->tx.tail;
size = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
if ((size == 0) && test_bit(ASYI_TXBUSY, &portp->istate))
size = 1;
- return(size);
+ return size;
}
/*****************************************************************************/
@@ -1447,7 +1447,7 @@ static int stl_setserial(stlport_t *port
(sio.close_delay != portp->close_delay) ||
((sio.flags & ~ASYNC_USR_MASK) !=
(portp->flags & ~ASYNC_USR_MASK)))
- return(-EPERM);
+ return -EPERM;
}
portp->flags = (portp->flags & ~ASYNC_USR_MASK) |
@@ -1457,7 +1457,7 @@ static int stl_setserial(stlport_t *port
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
stl_setport(portp, portp->tty->termios);
- return(0);
+ return 0;
}
/*****************************************************************************/
@@ -1467,12 +1467,12 @@ static int stl_tiocmget(struct tty_struc
stlport_t *portp;
if (tty == (struct tty_struct *) NULL)
- return(-ENODEV);
+ return -ENODEV;
portp = tty->driver_data;
if (portp == (stlport_t *) NULL)
- return(-ENODEV);
+ return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
- return(-EIO);
+ return -EIO;
return stl_getsignals(portp);
}
@@ -1484,12 +1484,12 @@ static int stl_tiocmset(struct tty_struc
int rts = -1, dtr = -1;
if (tty == (struct tty_struct *) NULL)
- return(-ENODEV);
+ return -ENODEV;
portp = tty->driver_data;
if (portp == (stlport_t *) NULL)
- return(-ENODEV);
+ return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
- return(-EIO);
+ return -EIO;
if (set & TIOCM_RTS)
rts = 1;
@@ -1517,15 +1517,15 @@ static int stl_ioctl(struct tty_struct *
#endif
if (tty == (struct tty_struct *) NULL)
- return(-ENODEV);
+ return -ENODEV;
portp = tty->driver_data;
if (portp == (stlport_t *) NULL)
- return(-ENODEV);
+ return -ENODEV;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) {
if (tty->flags & (1 << TTY_IO_ERROR))
- return(-EIO);
+ return -EIO;
}
rc = 0;
@@ -1566,7 +1566,7 @@ static int stl_ioctl(struct tty_struct *
break;
}
- return(rc);
+ return rc;
}
/*****************************************************************************/
@@ -1872,7 +1872,7 @@ static int stl_portinfo(stlport_t *portp
pos[(MAXLINE - 2)] = '+';
pos[(MAXLINE - 1)] = '\n';
- return(MAXLINE);
+ return MAXLINE;
}
/*****************************************************************************/
@@ -1957,7 +1957,7 @@ static int stl_readproc(char *page, char
stl_readdone:
*start = page;
- return(pos - page);
+ return (pos - page);
}
/*****************************************************************************/
@@ -2349,7 +2349,7 @@ static inline int stl_initeio(stlbrd_t *
} else {
rc = 0;
}
- return(rc);
+ return rc;
}
/*****************************************************************************/
@@ -3116,7 +3116,7 @@ static int __init stl_init(void)
return -1;
}
- return(0);
+ return 0;
}
/*****************************************************************************/
@@ -3132,7 +3132,7 @@ static int __init stl_init(void)
static int stl_cd1400getreg(stlport_t *portp, int regnr)
{
outb((regnr + portp->uartaddr), portp->ioaddr);
- return(inb(portp->ioaddr + EREG_DATA));
+ return inb(portp->ioaddr + EREG_DATA);
}
static void stl_cd1400setreg(stlport_t *portp, int regnr, int value)
@@ -3146,9 +3146,9 @@ static int stl_cd1400updatereg(stlport_t
outb((regnr + portp->uartaddr), portp->ioaddr);
if (inb(portp->ioaddr + EREG_DATA) != value) {
outb(value, portp->ioaddr + EREG_DATA);
- return(1);
+ return 1;
}
- return(0);
+ return 0;
}
/*****************************************************************************/
@@ -3206,7 +3206,7 @@ static int stl_cd1400panelinit(stlbrd_t
}
BRDDISABLE(panelp->brdnr);
- return(chipmask);
+ return chipmask;
}
/*****************************************************************************/
@@ -3557,7 +3557,7 @@ static int stl_cd1400getsignals(stlport_
#else
sigs |= TIOCM_DSR;
#endif
- return(sigs);
+ return sigs;
}
/*****************************************************************************/
@@ -3830,9 +3830,9 @@ static int stl_cd1400datastate(stlport_t
#endif
if (portp == (stlport_t *) NULL)
- return(0);
+ return 0;
- return(test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0);
+ return test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0;
}
/*****************************************************************************/
@@ -3912,20 +3912,20 @@ static inline int stl_cd1400breakisr(stl
outb((SRER + portp->uartaddr), ioaddr);
outb((inb(ioaddr + EREG_DATA) & ~(SRER_TXDATA | SRER_TXEMPTY)),
(ioaddr + EREG_DATA));
- return(1);
+ return 1;
} else if (portp->brklen > 1) {
outb((TDR + portp->uartaddr), ioaddr);
outb(ETC_CMD, (ioaddr + EREG_DATA));
outb(ETC_STOPBREAK, (ioaddr + EREG_DATA));
portp->brklen = -1;
- return(1);
+ return 1;
} else {
outb((COR2 + portp->uartaddr), ioaddr);
outb((inb(ioaddr + EREG_DATA) & ~COR2_ETC),
(ioaddr + EREG_DATA));
portp->brklen = 0;
}
- return(0);
+ return 0;
}
/*****************************************************************************/
@@ -4166,7 +4166,7 @@ static void stl_cd1400mdmisr(stlpanel_t
static int stl_sc26198getreg(stlport_t *portp, int regnr)
{
outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
- return(inb(portp->ioaddr + XP_DATA));
+ return inb(portp->ioaddr + XP_DATA);
}
static void stl_sc26198setreg(stlport_t *portp, int regnr, int value)
@@ -4180,9 +4180,9 @@ static int stl_sc26198updatereg(stlport_
outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
if (inb(portp->ioaddr + XP_DATA) != value) {
outb(value, (portp->ioaddr + XP_DATA));
- return(1);
+ return 1;
}
- return(0);
+ return 0;
}
/*****************************************************************************/
@@ -4194,7 +4194,7 @@ static int stl_sc26198updatereg(stlport_
static int stl_sc26198getglobreg(stlport_t *portp, int regnr)
{
outb(regnr, (portp->ioaddr + XP_ADDR));
- return(inb(portp->ioaddr + XP_DATA));
+ return inb(portp->ioaddr + XP_DATA);
}
#if 0
@@ -4252,7 +4252,7 @@ static int stl_sc26198panelinit(stlbrd_t
}
BRDDISABLE(panelp->brdnr);
- return(chipmask);
+ return chipmask;
}
/*****************************************************************************/
@@ -4546,7 +4546,7 @@ static int stl_sc26198getsignals(stlport
sigs |= (ipr & IPR_DTR) ? 0: TIOCM_DTR;
sigs |= (ipr & IPR_RTS) ? 0: TIOCM_RTS;
sigs |= TIOCM_DSR;
- return(sigs);
+ return sigs;
}
/*****************************************************************************/
@@ -4828,9 +4828,9 @@ static int stl_sc26198datastate(stlport_
#endif
if (portp == (stlport_t *) NULL)
- return(0);
+ return 0;
if (test_bit(ASYI_TXBUSY, &portp->istate))
- return(1);
+ return 1;
save_flags(flags);
cli();
@@ -4839,7 +4839,7 @@ static int stl_sc26198datastate(stlport_
BRDDISABLE(portp->brdnr);
restore_flags(flags);
- return((sr & SR_TXEMPTY) ? 0 : 1);
+ return (sr & SR_TXEMPTY) ? 0 : 1;
}
/*****************************************************************************/
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5c15f3e..de46e75 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2676,10 +2676,6 @@ config SHAPER
Class-Based Queueing (CBQ) scheduling support which you get if you
say Y to "QoS and/or fair queueing" above.
- To set up and configure shaper devices, you need the shapecfg
- program, available from <ftp://shadow.cabi.net/pub/Linux/> in the
- shaper package.
-
To compile this driver as a module, choose M here: the module
will be called shaper. If unsure, say N.
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 2b948ea..40926d7 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -641,7 +641,7 @@ static void lmc_watchdog (unsigned long
spin_lock_irqsave(&sc->lmc_lock, flags);
if(sc->check != 0xBEAFCAFE){
- printk("LMC: Corrupt net_device stuct, breaking out\n");
+ printk("LMC: Corrupt net_device struct, breaking out\n");
spin_unlock_irqrestore(&sc->lmc_lock, flags);
return;
}
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index c1a6e69..233a4f6 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -24,10 +24,6 @@ config NET_RADIO
the tools from
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
- Some user-level drivers for scarab devices which don't require
- special kernel support are available from
- <ftp://shadow.cabi.net/pub/Linux/>.
-
# Note : the cards are obsolete (can't buy them anymore), but the drivers
# are not, as people are still using them...
comment "Obsolete Wireless cards support (pre-802.11)"
@@ -160,7 +156,7 @@ config IPW2100
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
If you want to compile the driver as a module ( = code which can be
- inserted in and remvoed from the running kernel whenever you want),
+ inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ipw2100.ko.
@@ -213,7 +209,7 @@ config IPW2200
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
If you want to compile the driver as a module ( = code which can be
- inserted in and remvoed from the running kernel whenever you want),
+ inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ipw2200.ko.
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 7bdb00b..c065cb8 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -3403,7 +3403,7 @@ zfcp_erp_action_dequeue(struct zfcp_erp_
/**
* zfcp_erp_action_cleanup
*
- * Register unit with scsi stack if appropiate and fix reference counts.
+ * Register unit with scsi stack if appropriate and fix reference counts.
* Note: Temporary units are not registered with scsi stack.
*/
static void
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index 5beed4f..8d64f0b 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -149,7 +149,7 @@ typedef SCCBMGR_INFO * PSCCBMGR_INF
#define PCI_BUS_CARD 0x03
#define VESA_BUS_CARD 0x04
-/* SCCB struc used for both SCCB and UCB manager compiles!
+/* SCCB struct used for both SCCB and UCB manager compiles!
* The UCB Manager treats the SCCB as it's 'native hardware structure'
*/
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index a6deb01..bd3ffdf 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -328,7 +328,7 @@
* hdr_channel:x x - number of virtual bus for host drives
* shared_access:Y disable driver reserve/release protocol to
* access a shared resource from several nodes,
- * appropiate controller firmware required
+ * appropriate controller firmware required
* shared_access:N enable driver reserve/release protocol
* probe_eisa_isa:Y scan for EISA/ISA controllers
* probe_eisa_isa:N do not scan for EISA/ISA controllers
diff --git a/fs/efs/super.c b/fs/efs/super.c
index d8d5ea9..afc4891 100644
--- a/fs/efs/super.c
+++ b/fs/efs/super.c
@@ -222,12 +222,13 @@ static efs_block_t efs_validate_vh(struc
sblock);
#endif
}
- return(sblock);
+ return sblock;
}
static int efs_validate_super(struct efs_sb_info *sb, struct efs_super *super) {
- if (!IS_EFS_MAGIC(be32_to_cpu(super->fs_magic))) return -1;
+ if (!IS_EFS_MAGIC(be32_to_cpu(super->fs_magic)))
+ return -1;
sb->fs_magic = be32_to_cpu(super->fs_magic);
sb->total_blocks = be32_to_cpu(super->fs_size);
diff --git a/fs/sysv/ChangeLog b/fs/sysv/ChangeLog
index 18e3487..f403f8b 100644
--- a/fs/sysv/ChangeLog
+++ b/fs/sysv/ChangeLog
@@ -54,7 +54,7 @@ Fri Jan 4 2002 Alexander Viro <viro@p
(sysv_read_super): Likewise.
(v7_read_super): Likewise.
-Sun Dec 30 2001 Manfred Spraul <manfreds@colorfullife.com>
+Sun Dec 30 2001 Manfred Spraul <manfred@colorfullife.com>
* dir.c (dir_commit_chunk): Do not set dir->i_version.
(sysv_readdir): Likewise.
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 7dcdd06..8d58860 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -497,7 +497,7 @@ xfs_qm_dqflush_all(
int error;
if (mp->m_quotainfo == NULL)
- return (0);
+ return 0;
niters = 0;
again:
xfs_qm_mplist_lock(mp);
@@ -528,7 +528,7 @@ again:
error = xfs_qm_dqflush(dqp, flags);
xfs_dqunlock(dqp);
if (error)
- return (error);
+ return error;
xfs_qm_mplist_lock(mp);
if (recl != XFS_QI_MPLRECLAIMS(mp)) {
@@ -540,7 +540,7 @@ again:
xfs_qm_mplist_unlock(mp);
/* return ! busy */
- return (0);
+ return 0;
}
/*
* Release the group dquot pointers the user dquots may be
@@ -599,7 +599,7 @@ xfs_qm_dqpurge_int(
int nmisses;
if (mp->m_quotainfo == NULL)
- return (0);
+ return 0;
dqtype = (flags & XFS_QMOPT_UQUOTA) ? XFS_DQ_USER : 0;
dqtype |= (flags & XFS_QMOPT_PQUOTA) ? XFS_DQ_PROJ : 0;
@@ -796,7 +796,7 @@ xfs_qm_dqattach_one(
ASSERT(XFS_DQ_IS_LOCKED(dqp));
}
#endif
- return (error);
+ return error;
}
@@ -897,7 +897,7 @@ xfs_qm_dqattach(
(! XFS_NOT_DQATTACHED(mp, ip)) ||
(ip->i_ino == mp->m_sb.sb_uquotino) ||
(ip->i_ino == mp->m_sb.sb_gquotino))
- return (0);
+ return 0;
ASSERT((flags & XFS_QMOPT_ILOCKED) == 0 ||
XFS_ISLOCKED_INODE_EXCL(ip));
@@ -984,7 +984,7 @@ xfs_qm_dqattach(
else
ASSERT(XFS_ISLOCKED_INODE_EXCL(ip));
#endif
- return (error);
+ return error;
}
/*
@@ -1049,7 +1049,7 @@ xfs_qm_sync(
*/
if (! XFS_IS_QUOTA_ON(mp)) {
xfs_qm_mplist_unlock(mp);
- return (0);
+ return 0;
}
FOREACH_DQUOT_IN_MP(dqp, mp) {
/*
@@ -1109,9 +1109,9 @@ xfs_qm_sync(
error = xfs_qm_dqflush(dqp, flush_flags);
xfs_dqunlock(dqp);
if (error && XFS_FORCED_SHUTDOWN(mp))
- return(0); /* Need to prevent umount failure */
+ return 0; /* Need to prevent umount failure */
else if (error)
- return (error);
+ return error;
xfs_qm_mplist_lock(mp);
if (recl != XFS_QI_MPLRECLAIMS(mp)) {
@@ -1124,7 +1124,7 @@ xfs_qm_sync(
}
xfs_qm_mplist_unlock(mp);
- return (0);
+ return 0;
}
@@ -1146,7 +1146,7 @@ xfs_qm_init_quotainfo(
* Tell XQM that we exist as soon as possible.
*/
if ((error = xfs_qm_hold_quotafs_ref(mp))) {
- return (error);
+ return error;
}
qinf = mp->m_quotainfo = kmem_zalloc(sizeof(xfs_quotainfo_t), KM_SLEEP);
@@ -1158,7 +1158,7 @@ xfs_qm_init_quotainfo(
if ((error = xfs_qm_init_quotainos(mp))) {
kmem_free(qinf, sizeof(xfs_quotainfo_t));
mp->m_quotainfo = NULL;
- return (error);
+ return error;
}
spinlock_init(&qinf->qi_pinlock, "xfs_qinf_pin");
@@ -1232,7 +1232,7 @@ xfs_qm_init_quotainfo(
qinf->qi_rtbwarnlimit = XFS_QM_RTBWARNLIMIT;
}
- return (0);
+ return 0;
}
@@ -1332,7 +1332,7 @@ xfs_qm_dqget_noattach(
*/
ASSERT(error != ESRCH);
ASSERT(error != ENOENT);
- return (error);
+ return error;
}
ASSERT(udqp);
}
@@ -1355,7 +1355,7 @@ xfs_qm_dqget_noattach(
xfs_qm_dqrele(udqp);
ASSERT(error != ESRCH);
ASSERT(error != ENOENT);
- return (error);
+ return error;
}
ASSERT(gdqp);
@@ -1376,7 +1376,7 @@ xfs_qm_dqget_noattach(
if (udqp) ASSERT(XFS_DQ_IS_LOCKED(udqp));
if (gdqp) ASSERT(XFS_DQ_IS_LOCKED(gdqp));
#endif
- return (0);
+ return 0;
}
/*
@@ -1404,7 +1404,7 @@ xfs_qm_qino_alloc(
XFS_TRANS_PERM_LOG_RES,
XFS_CREATE_LOG_COUNT))) {
xfs_trans_cancel(tp, 0);
- return (error);
+ return error;
}
memset(&zerocr, 0, sizeof(zerocr));
memset(&zeroino, 0, sizeof(zeroino));
@@ -1413,7 +1413,7 @@ xfs_qm_qino_alloc(
&zerocr, 0, 1, ip, &committed))) {
xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES |
XFS_TRANS_ABORT);
- return (error);
+ return error;
}
/*
@@ -1461,9 +1461,9 @@ xfs_qm_qino_alloc(
if ((error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES,
NULL))) {
xfs_fs_cmn_err(CE_ALERT, mp, "XFS qino_alloc failed!");
- return (error);
+ return error;
}
- return (0);
+ return 0;
}
@@ -1508,7 +1508,7 @@ xfs_qm_reset_dqcounts(
ddq = (xfs_disk_dquot_t *) ((xfs_dqblk_t *)ddq + 1);
}
- return (0);
+ return 0;
}
STATIC int
@@ -1557,7 +1557,7 @@ xfs_qm_dqiter_bufs(
bno++;
firstid += XFS_QM_DQPERBLK(mp);
}
- return (error);
+ return error;
}
/*
@@ -1586,7 +1586,7 @@ xfs_qm_dqiterate(
* happens only at mount time which is single threaded.
*/
if (qip->i_d.di_nblocks == 0)
- return (0);
+ return 0;
map = kmem_alloc(XFS_DQITER_MAP_SIZE * sizeof(*map), KM_SLEEP);
@@ -1655,7 +1655,7 @@ xfs_qm_dqiterate(
kmem_free(map, XFS_DQITER_MAP_SIZE * sizeof(*map));
- return (error);
+ return error;
}
/*
@@ -1715,7 +1715,7 @@ xfs_qm_get_rtblks(
ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
if (!(ifp->if_flags & XFS_IFEXTENTS)) {
if ((error = xfs_iread_extents(NULL, ip, XFS_DATA_FORK)))
- return (error);
+ return error;
}
rtblks = 0;
nextents = ifp->if_bytes / sizeof(xfs_bmbt_rec_t);
@@ -1723,7 +1723,7 @@ xfs_qm_get_rtblks(
for (ep = base; ep < &base[nextents]; ep++)
rtblks += xfs_bmbt_get_blockcount(ep);
*O_rtblks = (xfs_qcnt_t)rtblks;
- return (0);
+ return 0;
}
/*
@@ -1767,7 +1767,7 @@ xfs_qm_dqusage_adjust(
*/
if ((error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_EXCL, &ip, bno))) {
*res = BULKSTAT_RV_NOTHING;
- return (error);
+ return error;
}
if (ip->i_d.di_mode == 0) {
@@ -1785,7 +1785,7 @@ xfs_qm_dqusage_adjust(
if ((error = xfs_qm_dqget_noattach(ip, &udqp, &gdqp))) {
xfs_iput(ip, XFS_ILOCK_EXCL);
*res = BULKSTAT_RV_GIVEUP;
- return (error);
+ return error;
}
rtblks = 0;
@@ -1802,7 +1802,7 @@ xfs_qm_dqusage_adjust(
if (gdqp)
xfs_qm_dqput(gdqp);
*res = BULKSTAT_RV_GIVEUP;
- return (error);
+ return error;
}
nblks = (xfs_qcnt_t)ip->i_d.di_nblocks - rtblks;
}
@@ -1847,7 +1847,7 @@ xfs_qm_dqusage_adjust(
* Goto next inode.
*/
*res = BULKSTAT_RV_DIDONE;
- return (0);
+ return 0;
}
/*
@@ -2041,7 +2041,7 @@ xfs_qm_init_quotainos(
XFS_QI_UQIP(mp) = uip;
XFS_QI_GQIP(mp) = gip;
- return (0);
+ return 0;
}
@@ -2062,7 +2062,7 @@ xfs_qm_shake_freelist(
int nflushes;
if (howmany <= 0)
- return (0);
+ return 0;
nreclaimed = 0;
restarts = 0;
@@ -2088,7 +2088,7 @@ xfs_qm_shake_freelist(
xfs_dqunlock(dqp);
xfs_qm_freelist_unlock(xfs_Gqm);
if (++restarts >= XFS_QM_RECLAIM_MAX_RESTARTS)
- return (nreclaimed);
+ return nreclaimed;
XQM_STATS_INC(xqmstats.xs_qm_dqwants);
goto tryagain;
}
@@ -2163,7 +2163,7 @@ xfs_qm_shake_freelist(
XFS_DQ_HASH_UNLOCK(hash);
xfs_qm_freelist_unlock(xfs_Gqm);
if (++restarts >= XFS_QM_RECLAIM_MAX_RESTARTS)
- return (nreclaimed);
+ return nreclaimed;
goto tryagain;
}
xfs_dqtrace_entry(dqp, "DQSHAKE: UNLINKING");
@@ -2188,7 +2188,7 @@ xfs_qm_shake_freelist(
dqp = nextdqp;
}
xfs_qm_freelist_unlock(xfs_Gqm);
- return (nreclaimed);
+ return nreclaimed;
}
@@ -2202,9 +2202,9 @@ xfs_qm_shake(int nr_to_scan, gfp_t gfp_m
int ndqused, nfree, n;
if (!kmem_shake_allow(gfp_mask))
- return (0);
+ return 0;
if (!xfs_Gqm)
- return (0);
+ return 0;
nfree = xfs_Gqm->qm_dqfreelist.qh_nelems; /* free dquots */
/* incore dquots in all f/s's */
@@ -2213,7 +2213,7 @@ xfs_qm_shake(int nr_to_scan, gfp_t gfp_m
ASSERT(ndqused >= 0);
if (nfree <= ndqused && nfree < ndquot)
- return (0);
+ return 0;
ndqused *= xfs_Gqm->qm_dqfree_ratio; /* target # of free dquots */
n = nfree - ndqused - ndquot; /* # over target */
@@ -2257,7 +2257,7 @@ xfs_qm_dqreclaim_one(void)
xfs_dqunlock(dqp);
xfs_qm_freelist_unlock(xfs_Gqm);
if (++restarts >= XFS_QM_RECLAIM_MAX_RESTARTS)
- return (NULL);
+ return NULL;
XQM_STATS_INC(xqmstats.xs_qm_dqwants);
goto startagain;
}
@@ -2333,7 +2333,7 @@ xfs_qm_dqreclaim_one(void)
}
xfs_qm_freelist_unlock(xfs_Gqm);
- return (dqpout);
+ return dqpout;
}
@@ -2369,7 +2369,7 @@ xfs_qm_dqalloc_incore(
*/
memset(&dqp->q_core, 0, sizeof(dqp->q_core));
*O_dqpp = dqp;
- return (B_FALSE);
+ return B_FALSE;
}
XQM_STATS_INC(xqmstats.xs_qm_dqreclaim_misses);
}
@@ -2382,7 +2382,7 @@ xfs_qm_dqalloc_incore(
*O_dqpp = kmem_zone_zalloc(xfs_Gqm->qm_dqzone, KM_SLEEP);
atomic_inc(&xfs_Gqm->qm_totaldquots);
- return (B_TRUE);
+ return B_TRUE;
}
@@ -2407,13 +2407,13 @@ xfs_qm_write_sb_changes(
0,
XFS_DEFAULT_LOG_COUNT))) {
xfs_trans_cancel(tp, 0);
- return (error);
+ return error;
}
xfs_mod_sb(tp, flags);
(void) xfs_trans_commit(tp, 0, NULL);
- return (0);
+ return 0;
}
@@ -2463,7 +2463,7 @@ xfs_qm_vop_dqalloc(
if ((error = xfs_qm_dqattach(ip, XFS_QMOPT_DQALLOC |
XFS_QMOPT_ILOCKED))) {
xfs_iunlock(ip, lockflags);
- return (error);
+ return error;
}
}
@@ -2486,7 +2486,7 @@ xfs_qm_vop_dqalloc(
XFS_QMOPT_DOWARN,
&uq))) {
ASSERT(error != ENOENT);
- return (error);
+ return error;
}
/*
* Get the ilock in the right order.
@@ -2517,7 +2517,7 @@ xfs_qm_vop_dqalloc(
if (uq)
xfs_qm_dqrele(uq);
ASSERT(error != ENOENT);
- return (error);
+ return error;
}
xfs_dqunlock(gq);
lockflags = XFS_ILOCK_SHARED;
@@ -2565,7 +2565,7 @@ xfs_qm_vop_dqalloc(
*O_gdqpp = gq;
else if (gq)
xfs_qm_dqrele(gq);
- return (0);
+ return 0;
}
/*
@@ -2608,7 +2608,7 @@ xfs_qm_vop_chown(
xfs_dqunlock(newdq);
*IO_olddq = newdq;
- return (prevdq);
+ return prevdq;
}
/*
@@ -2702,12 +2702,12 @@ xfs_qm_vop_rename_dqattach(
ip = i_tab[0];
if (! XFS_IS_QUOTA_ON(ip->i_mount))
- return (0);
+ return 0;
if (XFS_NOT_DQATTACHED(ip->i_mount, ip)) {
error = xfs_qm_dqattach(ip, 0);
if (error)
- return (error);
+ return error;
}
for (i = 1; (i < 4 && i_tab[i]); i++) {
/*
@@ -2717,11 +2717,11 @@ xfs_qm_vop_rename_dqattach(
if (XFS_NOT_DQATTACHED(ip->i_mount, ip)) {
error = xfs_qm_dqattach(ip, 0);
if (error)
- return (error);
+ return error;
}
}
}
- return (0);
+ return 0;
}
void
@@ -2834,7 +2834,7 @@ xfs_qm_dqhashlock_nowait(
int locked;
locked = mutex_trylock(&((dqp)->q_hash->qh_lock));
- return (locked);
+ return locked;
}
int
@@ -2844,7 +2844,7 @@ xfs_qm_freelist_lock_nowait(
int locked;
locked = mutex_trylock(&(xqm->qm_dqfreelist.qh_lock));
- return (locked);
+ return locked;
}
STATIC int
@@ -2855,5 +2855,5 @@ xfs_qm_mplist_nowait(
ASSERT(mp->m_quotainfo);
locked = mutex_trylock(&(XFS_QI_MPLLOCK(mp)));
- return (locked);
+ return locked;
}
diff --git a/fs/xfs/xfs_dir_leaf.c b/fs/xfs/xfs_dir_leaf.c
index 950df31..e830740 100644
--- a/fs/xfs/xfs_dir_leaf.c
+++ b/fs/xfs/xfs_dir_leaf.c
@@ -147,7 +147,7 @@ xfs_dir_shortform_create(xfs_da_args_t *
hdr->count = 0;
dp->i_d.di_size = sizeof(*hdr);
xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_DDATA);
- return(0);
+ return 0;
}
/*
@@ -180,7 +180,7 @@ xfs_dir_shortform_addname(xfs_da_args_t
if (sfe->namelen == args->namelen &&
args->name[0] == sfe->name[0] &&
memcmp(args->name, sfe->name, args->namelen) == 0)
- return(XFS_ERROR(EEXIST));
+ return XFS_ERROR(EEXIST);
sfe = XFS_DIR_SF_NEXTENTRY(sfe);
}
@@ -198,7 +198,7 @@ xfs_dir_shortform_addname(xfs_da_args_t
dp->i_d.di_size += size;
xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_DDATA);
- return(0);
+ return 0;
}
/*
@@ -238,7 +238,7 @@ xfs_dir_shortform_removename(xfs_da_args
}
if (i < 0) {
ASSERT(args->oknoent);
- return(XFS_ERROR(ENOENT));
+ return XFS_ERROR(ENOENT);
}
if ((base + size) != dp->i_d.di_size) {
@@ -251,7 +251,7 @@ xfs_dir_shortform_removename(xfs_da_args
dp->i_d.di_size -= size;
xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_DDATA);
- return(0);
+ return 0;
}
/*
@@ -390,7 +390,7 @@ xfs_dir_shortform_to_leaf(xfs_da_args_t
out:
kmem_free(tmpbuffer, size);
- return(retval);
+ return retval;
}
STATIC int
@@ -596,7 +596,7 @@ xfs_dir_shortform_replace(xfs_da_args_t
/* XXX - replace assert? */
XFS_DIR_SF_PUT_DIRINO(&args->inumber, &sf->hdr.parent);
xfs_trans_log_inode(args->trans, dp, XFS_ILOG_DDATA);
- return(0);
+ return 0;
}
ASSERT(args->namelen != 1 || args->name[0] != '.');
sfe = &sf->list[0];
@@ -608,12 +608,12 @@ xfs_dir_shortform_replace(xfs_da_args_t
(char *)&sfe->inumber, sizeof(xfs_ino_t)));
XFS_DIR_SF_PUT_DIRINO(&args->inumber, &sfe->inumber);
xfs_trans_log_inode(args->trans, dp, XFS_ILOG_DDATA);
- return(0);
+ return 0;
}
sfe = XFS_DIR_SF_NEXTENTRY(sfe);
}
ASSERT(args->oknoent);
- return(XFS_ERROR(ENOENT));
+ return XFS_ERROR(ENOENT);
}
/*
@@ -695,7 +695,7 @@ xfs_dir_leaf_to_shortform(xfs_da_args_t
out:
kmem_free(tmpbuffer, XFS_LBSIZE(dp->i_mount));
- return(retval);
+ return retval;
}
/*
@@ -715,17 +715,17 @@ xfs_dir_leaf_to_node(xfs_da_args_t *args
retval = xfs_da_grow_inode(args, &blkno);
ASSERT(blkno == 1);
if (retval)
- return(retval);
+ return retval;
retval = xfs_da_read_buf(args->trans, args->dp, 0, -1, &bp1,
XFS_DATA_FORK);
if (retval)
- return(retval);
+ return retval;
ASSERT(bp1 != NULL);
retval = xfs_da_get_buf(args->trans, args->dp, 1, -1, &bp2,
XFS_DATA_FORK);
if (retval) {
xfs_da_buf_done(bp1);
- return(retval);
+ return retval;
}
ASSERT(bp2 != NULL);
memcpy(bp2->data, bp1->data, XFS_LBSIZE(dp->i_mount));
@@ -738,7 +738,7 @@ xfs_dir_leaf_to_node(xfs_da_args_t *args
retval = xfs_da_node_create(args, 0, 1, &bp1, XFS_DATA_FORK);
if (retval) {
xfs_da_buf_done(bp2);
- return(retval);
+ return retval;
}
node = bp1->data;
leaf = bp2->data;
@@ -751,7 +751,7 @@ xfs_dir_leaf_to_node(xfs_da_args_t *args
XFS_DA_LOGRANGE(node, &node->btree[0], sizeof(node->btree[0])));
xfs_da_buf_done(bp1);
- return(retval);
+ return retval;
}
@@ -776,7 +776,7 @@ xfs_dir_leaf_create(xfs_da_args_t *args,
ASSERT(dp != NULL);
retval = xfs_da_get_buf(args->trans, dp, blkno, -1, &bp, XFS_DATA_FORK);
if (retval)
- return(retval);
+ return retval;
ASSERT(bp != NULL);
leaf = bp->data;
memset((char *)leaf, 0, XFS_LBSIZE(dp->i_mount));
@@ -791,7 +791,7 @@ xfs_dir_leaf_create(xfs_da_args_t *args,
xfs_da_log_buf(args->trans, bp, 0, XFS_LBSIZE(dp->i_mount) - 1);
*bpp = bp;
- return(0);
+ return 0;
}
/*
@@ -813,10 +813,10 @@ xfs_dir_leaf_split(xfs_da_state_t *state
ASSERT(oldblk->magic == XFS_DIR_LEAF_MAGIC);
error = xfs_da_grow_inode(args, &blkno);
if (error)
- return(error);
+ return error;
error = xfs_dir_leaf_create(args, blkno, &newblk->bp);
if (error)
- return(error);
+ return error;
newblk->blkno = blkno;
newblk->magic = XFS_DIR_LEAF_MAGIC;
@@ -826,7 +826,7 @@ xfs_dir_leaf_split(xfs_da_state_t *state
xfs_dir_leaf_rebalance(state, oldblk, newblk);
error = xfs_da_blk_link(state, oldblk, newblk);
if (error)
- return(error);
+ return error;
/*
* Insert the new entry in the correct block.
@@ -842,7 +842,7 @@ xfs_dir_leaf_split(xfs_da_state_t *state
*/
oldblk->hashval = xfs_dir_leaf_lasthash(oldblk->bp, NULL);
newblk->hashval = xfs_dir_leaf_lasthash(newblk->bp, NULL);
- return(error);
+ return error;
}
/*
@@ -885,7 +885,7 @@ xfs_dir_leaf_add(xfs_dabuf_t *bp, xfs_da
if (INT_GET(map->size, ARCH_CONVERT) >= tmp) {
if (!args->justcheck)
xfs_dir_leaf_add_work(bp, args, index, i);
- return(0);
+ return 0;
}
sum += INT_GET(map->size, ARCH_CONVERT);
}
@@ -896,7 +896,7 @@ xfs_dir_leaf_add(xfs_dabuf_t *bp, xfs_da
* no good and we should just give up.
*/
if (!hdr->holes && (sum < entsize))
- return(XFS_ERROR(ENOSPC));
+ return XFS_ERROR(ENOSPC);
/*
* Compact the entries to coalesce free space.
@@ -909,18 +909,18 @@ xfs_dir_leaf_add(xfs_dabuf_t *bp, xfs_da
(uint)sizeof(xfs_dir_leaf_entry_t) : 0,
args->justcheck);
if (error)
- return(error);
+ return error;
/*
* After compaction, the block is guaranteed to have only one
* free region, in freemap[0]. If it is not big enough, give up.
*/
if (INT_GET(hdr->freemap[0].size, ARCH_CONVERT) <
(entsize + (uint)sizeof(xfs_dir_leaf_entry_t)))
- return(XFS_ERROR(ENOSPC));
+ return XFS_ERROR(ENOSPC);
if (!args->justcheck)
xfs_dir_leaf_add_work(bp, args, index, 0);
- return(0);
+ return 0;
}
/*
@@ -1072,7 +1072,7 @@ xfs_dir_leaf_compact(xfs_trans_t *trans,
kmem_free(tmpbuffer, lbsize);
if (musthave || justcheck)
kmem_free(tmpbuffer2, lbsize);
- return(rval);
+ return rval;
}
/*
@@ -1292,7 +1292,7 @@ xfs_dir_leaf_figure_balance(xfs_da_state
*countarg = count;
*namebytesarg = totallen;
- return(foundit);
+ return foundit;
}
/*========================================================================
@@ -1334,7 +1334,7 @@ xfs_dir_leaf_toosmall(xfs_da_state_t *st
INT_GET(leaf->hdr.namebytes, ARCH_CONVERT);
if (bytes > (state->blocksize >> 1)) {
*action = 0; /* blk over 50%, don't try to join */
- return(0);
+ return 0;
}
/*
@@ -1353,13 +1353,13 @@ xfs_dir_leaf_toosmall(xfs_da_state_t *st
error = xfs_da_path_shift(state, &state->altpath, forward,
0, &retval);
if (error)
- return(error);
+ return error;
if (retval) {
*action = 0;
} else {
*action = 2;
}
- return(0);
+ return 0;
}
/*
@@ -1381,7 +1381,7 @@ xfs_dir_leaf_toosmall(xfs_da_state_t *st
blkno, -1, &bp,
XFS_DATA_FORK);
if (error)
- return(error);
+ return error;
ASSERT(bp != NULL);
leaf = (xfs_dir_leafblock_t *)info;
@@ -1402,7 +1402,7 @@ xfs_dir_leaf_toosmall(xfs_da_state_t *st
}
if (i >= 2) {
*action = 0;
- return(0);
+ return 0;
}
xfs_da_buf_done(bp);
@@ -1419,13 +1419,13 @@ xfs_dir_leaf_toosmall(xfs_da_state_t *st
0, &retval);
}
if (error)
- return(error);
+ return error;
if (retval) {
*action = 0;
} else {
*action = 1;
}
- return(0);
+ return 0;
}
/*
@@ -1575,8 +1575,8 @@ xfs_dir_leaf_remove(xfs_trans_t *trans,
tmp += INT_GET(leaf->hdr.count, ARCH_CONVERT) * ((uint)sizeof(xfs_dir_leaf_name_t) - 1);
tmp += INT_GET(leaf->hdr.namebytes, ARCH_CONVERT);
if (tmp < mp->m_dir_magicpct)
- return(1); /* leaf is < 37% full */
- return(0);
+ return 1; /* leaf is < 37% full */
+ return 0;
}
/*
@@ -1732,7 +1732,7 @@ xfs_dir_leaf_lookup_int(xfs_dabuf_t *bp,
if ((probe == INT_GET(leaf->hdr.count, ARCH_CONVERT)) || (INT_GET(entry->hashval, ARCH_CONVERT) != hashval)) {
*index = probe;
ASSERT(args->oknoent);
- return(XFS_ERROR(ENOENT));
+ return XFS_ERROR(ENOENT);
}
/*
@@ -1745,14 +1745,14 @@ xfs_dir_leaf_lookup_int(xfs_dabuf_t *bp,
memcmp(args->name, namest->name, args->namelen) == 0) {
XFS_DIR_SF_GET_DIRINO(&namest->inumber, &args->inumber);
*index = probe;
- return(XFS_ERROR(EEXIST));
+ return XFS_ERROR(EEXIST);
}
entry++;
probe++;
}
*index = probe;
ASSERT(probe == INT_GET(leaf->hdr.count, ARCH_CONVERT) || args->oknoent);
- return(XFS_ERROR(ENOENT));
+ return XFS_ERROR(ENOENT);
}
/*========================================================================
@@ -1890,9 +1890,9 @@ xfs_dir_leaf_order(xfs_dabuf_t *leaf1_bp
INT_GET(leaf1->entries[ 0 ].hashval, ARCH_CONVERT)) ||
(INT_GET(leaf2->entries[ INT_GET(leaf2->hdr.count, ARCH_CONVERT)-1 ].hashval, ARCH_CONVERT) <
INT_GET(leaf1->entries[ INT_GET(leaf1->hdr.count, ARCH_CONVERT)-1 ].hashval, ARCH_CONVERT)))) {
- return(1);
+ return 1;
}
- return(0);
+ return 0;
}
/*
@@ -1942,7 +1942,7 @@ xfs_dir_leaf_getdents_int(
leaf = bp->data;
if (INT_GET(leaf->hdr.info.magic, ARCH_CONVERT) != XFS_DIR_LEAF_MAGIC) {
*eobp = 1;
- return(XFS_ERROR(ENOENT)); /* XXX wrong code */
+ return XFS_ERROR(ENOENT); /* XXX wrong code */
}
want_entno = XFS_DA_COOKIE_ENTRY(mp, uio->uio_offset);
@@ -2000,7 +2000,7 @@ xfs_dir_leaf_getdents_int(
* the node code will be setting uio_offset anyway.
*/
*eobp = 0;
- return(0);
+ return 0;
}
xfs_dir_trace_g_due("leaf: hash found", dp, uio, entry);
@@ -2057,7 +2057,7 @@ xfs_dir_leaf_getdents_int(
retval = xfs_da_read_buf(dp->i_transp, dp, thishash,
nextda, &bp2, XFS_DATA_FORK);
if (retval)
- return(retval);
+ return retval;
ASSERT(bp2 != NULL);
@@ -2073,7 +2073,7 @@ xfs_dir_leaf_getdents_int(
leaf2);
xfs_da_brelse(dp->i_transp, bp2);
- return(XFS_ERROR(EFSCORRUPTED));
+ return XFS_ERROR(EFSCORRUPTED);
}
nexthash = INT_GET(leaf2->entries[0].hashval,
@@ -2139,7 +2139,7 @@ xfs_dir_leaf_getdents_int(
xfs_dir_trace_g_du("leaf: E-O-B", dp, uio);
- return(retval);
+ return retval;
}
}
@@ -2149,7 +2149,7 @@ xfs_dir_leaf_getdents_int(
xfs_dir_trace_g_du("leaf: E-O-F", dp, uio);
- return(0);
+ return 0;
}
/*
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index 163031c..b4d971b 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -501,7 +501,7 @@ xfs_reserve_blocks(
if (inval == (__uint64_t *)NULL) {
outval->resblks = mp->m_resblks;
outval->resblks_avail = mp->m_resblks_avail;
- return(0);
+ return 0;
}
request = *inval;
@@ -537,7 +537,7 @@ xfs_reserve_blocks(
outval->resblks = mp->m_resblks;
outval->resblks_avail = mp->m_resblks_avail;
XFS_SB_UNLOCK(mp, s);
- return(0);
+ return 0;
}
void
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 3d9a36e..9176995 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -403,7 +403,7 @@ xfs_log_release_iclog(xfs_mount_t *mp,
if (xlog_state_release_iclog(log, iclog)) {
xfs_force_shutdown(mp, XFS_LOG_IO_ERROR);
- return(EIO);
+ return EIO;
}
return 0;
@@ -556,7 +556,7 @@ xfs_log_unmount(xfs_mount_t *mp)
error = xfs_log_unmount_write(mp);
xfs_log_unmount_dealloc(mp);
- return (error);
+ return error;
}
/*
@@ -728,7 +728,7 @@ xfs_log_write(xfs_mount_t * mp,
if ((error = xlog_write(mp, reg, nentries, tic, start_lsn, NULL, 0))) {
xfs_force_shutdown(mp, XFS_LOG_IO_ERROR);
}
- return (error);
+ return error;
} /* xfs_log_write */
@@ -836,7 +836,7 @@ xfs_log_need_covered(xfs_mount_t *mp)
needed = 1;
}
LOG_UNLOCK(log, s);
- return(needed);
+ return needed;
}
/******************************************************************************
@@ -1003,7 +1003,7 @@ xlog_bdstrat_cb(struct xfs_buf *bp)
XFS_BUF_ERROR(bp, EIO);
XFS_BUF_STALE(bp);
xfs_biodone(bp);
- return (XFS_ERROR(EIO));
+ return XFS_ERROR(EIO);
}
@@ -1263,7 +1263,7 @@ xlog_commit_record(xfs_mount_t *mp,
iclog, XLOG_COMMIT_TRANS))) {
xfs_force_shutdown(mp, XFS_LOG_IO_ERROR);
}
- return (error);
+ return error;
} /* xlog_commit_record */
@@ -1460,7 +1460,7 @@ xlog_sync(xlog_t *log,
if ((error = XFS_bwrite(bp))) {
xfs_ioerror_alert("xlog_sync", log->l_mp, bp,
XFS_BUF_ADDR(bp));
- return (error);
+ return error;
}
if (split) {
bp = iclog->ic_log->l_xbuf;
@@ -1498,10 +1498,10 @@ xlog_sync(xlog_t *log,
if ((error = XFS_bwrite(bp))) {
xfs_ioerror_alert("xlog_sync (split)", log->l_mp,
bp, XFS_BUF_ADDR(bp));
- return (error);
+ return error;
}
}
- return (0);
+ return 0;
} /* xlog_sync */
@@ -1798,7 +1798,7 @@ xlog_write(xfs_mount_t * mp,
for (index = 0; index < nentries; ) {
if ((error = xlog_state_get_iclog_space(log, len, &iclog, ticket,
&contwr, &log_offset)))
- return (error);
+ return error;
ASSERT(log_offset <= iclog->ic_size - 1);
ptr = (__psint_t) ((char *)iclog->ic_datap+log_offset);
@@ -1903,7 +1903,7 @@ xlog_write(xfs_mount_t * mp,
xlog_state_finish_copy(log, iclog, record_cnt, data_cnt);
record_cnt = data_cnt = 0;
if ((error = xlog_state_release_iclog(log, iclog)))
- return (error);
+ return error;
break; /* don't increment index */
} else { /* copied entire region */
index++;
@@ -1917,7 +1917,7 @@ xlog_write(xfs_mount_t * mp,
ASSERT(flags & XLOG_COMMIT_TRANS);
*commit_iclog = iclog;
} else if ((error = xlog_state_release_iclog(log, iclog)))
- return (error);
+ return error;
if (index == nentries)
return 0; /* we are done */
else
@@ -1934,7 +1934,7 @@ xlog_write(xfs_mount_t * mp,
*commit_iclog = iclog;
return 0;
}
- return (xlog_state_release_iclog(log, iclog));
+ return xlog_state_release_iclog(log, iclog);
} /* xlog_write */
@@ -2050,7 +2050,7 @@ xlog_get_lowest_lsn(
}
lsn_log = lsn_log->ic_next;
} while (lsn_log != log->l_iclog);
- return(lowest_lsn);
+ return lowest_lsn;
}
@@ -2402,7 +2402,7 @@ restart:
if (iclog->ic_refcnt == 1) {
LOG_UNLOCK(log, s);
if ((error = xlog_state_release_iclog(log, iclog)))
- return (error);
+ return error;
} else {
iclog->ic_refcnt--;
LOG_UNLOCK(log, s);
@@ -2569,7 +2569,7 @@ xlog_regrant_write_log_space(xlog_t *
XLOG_TIC_RESET_RES(tic);
if (tic->t_cnt > 0)
- return (0);
+ return 0;
#ifdef DEBUG
if (log->l_flags & XLOG_ACTIVE_RECOVERY)
@@ -2667,7 +2667,7 @@ redo:
xlog_trace_loggrant(log, tic, "xlog_regrant_write_log_space: exit");
xlog_verify_grant_head(log, 1);
GRANT_UNLOCK(log, s);
- return (0);
+ return 0;
error_return:
@@ -2837,7 +2837,7 @@ xlog_state_release_iclog(xlog_t *log,
if (sync) {
return xlog_sync(log, iclog);
}
- return (0);
+ return 0;
} /* xlog_state_release_iclog */
@@ -3127,7 +3127,7 @@ try_again:
} while (iclog != log->l_iclog);
LOG_UNLOCK(log, s);
- return (0);
+ return 0;
} /* xlog_state_sync */
@@ -3545,12 +3545,12 @@ xlog_state_ioerror(
ic->ic_state = XLOG_STATE_IOERROR;
ic = ic->ic_next;
} while (ic != iclog);
- return (0);
+ return 0;
}
/*
* Return non-zero, if state transition has already happened.
*/
- return (1);
+ return 1;
}
/*
@@ -3587,7 +3587,7 @@ xfs_log_force_umount(
log->l_flags & XLOG_ACTIVE_RECOVERY) {
mp->m_flags |= XFS_MOUNT_FS_SHUTDOWN;
XFS_BUF_DONE(mp->m_sb_bp);
- return (0);
+ return 0;
}
/*
@@ -3596,7 +3596,7 @@ xfs_log_force_umount(
*/
if (logerror && log->l_iclog->ic_state & XLOG_STATE_IOERROR) {
ASSERT(XLOG_FORCED_SHUTDOWN(log));
- return (1);
+ return 1;
}
retval = 0;
/*
@@ -3678,7 +3678,7 @@ xfs_log_force_umount(
}
#endif
/* return non-zero if log IOERROR transition had already happened */
- return (retval);
+ return retval;
}
STATIC int
@@ -3692,8 +3692,8 @@ xlog_iclogs_empty(xlog_t *log)
* any language.
*/
if (iclog->ic_header.h_num_logops)
- return(0);
+ return 0;
iclog = iclog->ic_next;
} while (iclog != log->l_iclog);
- return(1);
+ return 1;
}
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 6088e14..62188ea 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -646,7 +646,7 @@ xfs_mountfs(
if (mp->m_sb_bp == NULL) {
if ((error = xfs_readsb(mp))) {
- return (error);
+ return error;
}
}
xfs_mount_common(mp, sbp);
@@ -889,7 +889,7 @@ xfs_mountfs(
* For client case we are done now
*/
if (mfsi_flags & XFS_MFSI_CLIENT) {
- return(0);
+ return 0;
}
/*
@@ -1182,7 +1182,7 @@ xfs_unmountfs_writesb(xfs_mount_t *mp)
xfs_fs_cmn_err(CE_ALERT, mp, "Superblock write error detected while unmounting. Filesystem may not be marked shared readonly");
}
xfs_buf_relse(sbp);
- return (error);
+ return error;
}
/*
@@ -1257,19 +1257,19 @@ xfs_mod_incore_sb_unlocked(xfs_mount_t *
lcounter += delta;
if (lcounter < 0) {
ASSERT(0);
- return (XFS_ERROR(EINVAL));
+ return XFS_ERROR(EINVAL);
}
mp->m_sb.sb_icount = lcounter;
- return (0);
+ return 0;
case XFS_SBS_IFREE:
lcounter = (long long)mp->m_sb.sb_ifree;
lcounter += delta;
if (lcounter < 0) {
ASSERT(0);
- return (XFS_ERROR(EINVAL));
+ return XFS_ERROR(EINVAL);
}
mp->m_sb.sb_ifree = lcounter;
- return (0);
+ return 0;
case XFS_SBS_FDBLOCKS:
lcounter = (long long)mp->m_sb.sb_fdblocks;
@@ -1296,101 +1296,101 @@ xfs_mod_incore_sb_unlocked(xfs_mount_t *
if (rsvd) {
lcounter = (long long)mp->m_resblks_avail + delta;
if (lcounter < 0) {
- return (XFS_ERROR(ENOSPC));
+ return XFS_ERROR(ENOSPC);
}
mp->m_resblks_avail = lcounter;
- return (0);
+ return 0;
} else { /* not reserved */
- return (XFS_ERROR(ENOSPC));
+ return XFS_ERROR(ENOSPC);
}
}
}
mp->m_sb.sb_fdblocks = lcounter;
- return (0);
+ return 0;
case XFS_SBS_FREXTENTS:
lcounter = (long long)mp->m_sb.sb_frextents;
lcounter += delta;
if (lcounter < 0) {
- return (XFS_ERROR(ENOSPC));
+ return XFS_ERROR(ENOSPC);
}
mp->m_sb.sb_frextents = lcounter;
- return (0);
+ return 0;
case XFS_SBS_DBLOCKS:
lcounter = (long long)mp->m_sb.sb_dblocks;
lcounter += delta;
if (lcounter < 0) {
ASSERT(0);
- return (XFS_ERROR(EINVAL));
+ return XFS_ERROR(EINVAL);
}
mp->m_sb.sb_dblocks = lcounter;
- return (0);
+ return 0;
case XFS_SBS_AGCOUNT:
scounter = mp->m_sb.sb_agcount;
scounter += delta;
if (scounter < 0) {
ASSERT(0);
- return (XFS_ERROR(EINVAL));
+ return XFS_ERROR(EINVAL);
}
mp->m_sb.sb_agcount = scounter;
- return (0);
+ return 0;
case XFS_SBS_IMAX_PCT:
scounter = mp->m_sb.sb_imax_pct;
scounter += delta;
if (scounter < 0) {
ASSERT(0);
- return (XFS_ERROR(EINVAL));
+ return XFS_ERROR(EINVAL);
}
mp->m_sb.sb_imax_pct = scounter;
- return (0);
+ return 0;
case XFS_SBS_REXTSIZE:
scounter = mp->m_sb.sb_rextsize;
scounter += delta;
if (scounter < 0) {
ASSERT(0);
- return (XFS_ERROR(EINVAL));
+ return XFS_ERROR(EINVAL);
}
mp->m_sb.sb_rextsize = scounter;
- return (0);
+ return 0;
case XFS_SBS_RBMBLOCKS:
scounter = mp->m_sb.sb_rbmblocks;
scounter += delta;
if (scounter < 0) {
ASSERT(0);
- return (XFS_ERROR(EINVAL));
+ return XFS_ERROR(EINVAL);
}
mp->m_sb.sb_rbmblocks = scounter;
- return (0);
+ return 0;
case XFS_SBS_RBLOCKS:
lcounter = (long long)mp->m_sb.sb_rblocks;
lcounter += delta;
if (lcounter < 0) {
ASSERT(0);
- return (XFS_ERROR(EINVAL));
+ return XFS_ERROR(EINVAL);
}
mp->m_sb.sb_rblocks = lcounter;
- return (0);
+ return 0;
case XFS_SBS_REXTENTS:
lcounter = (long long)mp->m_sb.sb_rextents;
lcounter += delta;
if (lcounter < 0) {
ASSERT(0);
- return (XFS_ERROR(EINVAL));
+ return XFS_ERROR(EINVAL);
}
mp->m_sb.sb_rextents = lcounter;
- return (0);
+ return 0;
case XFS_SBS_REXTSLOG:
scounter = mp->m_sb.sb_rextslog;
scounter += delta;
if (scounter < 0) {
ASSERT(0);
- return (XFS_ERROR(EINVAL));
+ return XFS_ERROR(EINVAL);
}
mp->m_sb.sb_rextslog = scounter;
- return (0);
+ return 0;
default:
ASSERT(0);
- return (XFS_ERROR(EINVAL));
+ return XFS_ERROR(EINVAL);
}
}
@@ -1409,7 +1409,7 @@ xfs_mod_incore_sb(xfs_mount_t *mp, xfs_s
s = XFS_SB_LOCK(mp);
status = xfs_mod_incore_sb_unlocked(mp, field, delta, rsvd);
XFS_SB_UNLOCK(mp, s);
- return (status);
+ return status;
}
/*
@@ -1470,7 +1470,7 @@ xfs_mod_incore_sb_batch(xfs_mount_t *mp,
}
}
XFS_SB_UNLOCK(mp, s);
- return (status);
+ return status;
}
/*
@@ -1500,7 +1500,7 @@ xfs_getsb(
}
XFS_BUF_HOLD(bp);
ASSERT(XFS_BUF_ISDONE(bp));
- return (bp);
+ return bp;
}
/*
diff --git a/fs/xfs/xfs_trans_item.c b/fs/xfs/xfs_trans_item.c
index 486147e..1117d60 100644
--- a/fs/xfs/xfs_trans_item.c
+++ b/fs/xfs/xfs_trans_item.c
@@ -78,7 +78,7 @@ xfs_trans_add_item(xfs_trans_t *tp, xfs_
lidp->lid_size = 0;
lip->li_desc = lidp;
lip->li_mountp = tp->t_mountp;
- return (lidp);
+ return lidp;
}
/*
@@ -119,7 +119,7 @@ xfs_trans_add_item(xfs_trans_t *tp, xfs_
lidp->lid_size = 0;
lip->li_desc = lidp;
lip->li_mountp = tp->t_mountp;
- return (lidp);
+ return lidp;
}
/*
@@ -180,7 +180,7 @@ xfs_trans_find_item(xfs_trans_t *tp, xfs
{
ASSERT(lip->li_desc != NULL);
- return (lip->li_desc);
+ return lip->li_desc;
}
@@ -219,10 +219,10 @@ xfs_trans_first_item(xfs_trans_t *tp)
continue;
}
- return (XFS_LIC_SLOT(licp, i));
+ return XFS_LIC_SLOT(licp, i);
}
cmn_err(CE_WARN, "xfs_trans_first_item() -- no first item");
- return(NULL);
+ return NULL;
}
@@ -252,7 +252,7 @@ xfs_trans_next_item(xfs_trans_t *tp, xfs
continue;
}
- return (XFS_LIC_SLOT(licp, i));
+ return XFS_LIC_SLOT(licp, i);
}
/*
@@ -261,7 +261,7 @@ xfs_trans_next_item(xfs_trans_t *tp, xfs
* If there is no next chunk, return NULL.
*/
if (licp->lic_next == NULL) {
- return (NULL);
+ return NULL;
}
licp = licp->lic_next;
@@ -271,7 +271,7 @@ xfs_trans_next_item(xfs_trans_t *tp, xfs
continue;
}
- return (XFS_LIC_SLOT(licp, i));
+ return XFS_LIC_SLOT(licp, i);
}
ASSERT(0);
/* NOTREACHED */
@@ -425,7 +425,7 @@ xfs_trans_unlock_chunk(
}
}
- return (freed);
+ return freed;
}
@@ -478,7 +478,7 @@ xfs_trans_add_busy(xfs_trans_t *tp, xfs_
*/
lbsp->lbc_ag = ag;
lbsp->lbc_idx = idx;
- return (lbsp);
+ return lbsp;
}
/*
@@ -512,7 +512,7 @@ xfs_trans_add_busy(xfs_trans_t *tp, xfs_
tp->t_busy_free--;
lbsp->lbc_ag = ag;
lbsp->lbc_idx = idx;
- return (lbsp);
+ return lbsp;
}
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 8076cc9..eaab355 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -338,7 +338,7 @@ xfs_setattr(
code = XFS_QM_DQVOPALLOC(mp, ip, uid, gid, projid, qflags,
&udqp, &gdqp);
if (code)
- return (code);
+ return code;
}
/*
@@ -1027,11 +1027,8 @@ xfs_readlink(
}
-
error_return:
-
xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
return error;
}
@@ -1206,7 +1203,7 @@ xfs_inactive_free_eofblocks(
last_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)XFS_MAXIOFFSET(mp));
map_len = last_fsb - end_fsb;
if (map_len <= 0)
- return (0);
+ return 0;
nimaps = 1;
xfs_ilock(ip, XFS_ILOCK_SHARED);
@@ -1221,7 +1218,7 @@ xfs_inactive_free_eofblocks(
* Attach the dquots to the inode up front.
*/
if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
- return (error);
+ return error;
/*
* There are blocks after the end of file.
@@ -1249,7 +1246,7 @@ xfs_inactive_free_eofblocks(
ASSERT(XFS_FORCED_SHUTDOWN(mp));
xfs_trans_cancel(tp, 0);
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
- return (error);
+ return error;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
@@ -1277,7 +1274,7 @@ xfs_inactive_free_eofblocks(
}
xfs_iunlock(ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
}
- return (error);
+ return error;
}
/*
@@ -1455,7 +1452,7 @@ xfs_inactive_symlink_local(
if (error) {
xfs_trans_cancel(*tpp, 0);
*tpp = NULL;
- return (error);
+ return error;
}
xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
@@ -1468,7 +1465,7 @@ xfs_inactive_symlink_local(
XFS_DATA_FORK);
ASSERT(ip->i_df.if_bytes == 0);
}
- return (0);
+ return 0;
}
/*
@@ -1494,7 +1491,7 @@ xfs_inactive_attrs(
if (error) {
*tpp = NULL;
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
- return (error); /* goto out*/
+ return error; /* goto out */
}
tp = xfs_trans_alloc(mp, XFS_TRANS_INACTIVE);
@@ -1507,7 +1504,7 @@ xfs_inactive_attrs(
xfs_trans_cancel(tp, 0);
*tpp = NULL;
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
- return (error);
+ return error;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
@@ -1518,7 +1515,7 @@ xfs_inactive_attrs(
ASSERT(ip->i_d.di_anextents == 0);
*tpp = tp;
- return (0);
+ return 0;
}
STATIC int
@@ -1557,7 +1554,7 @@ xfs_release(
(!(ip->i_d.di_flags &
(XFS_DIFLAG_PREALLOC | XFS_DIFLAG_APPEND)))) {
if ((error = xfs_inactive_free_eofblocks(mp, ip)))
- return (error);
+ return error;
/* Update linux inode block count after free above */
LINVFS_GET_IP(vp)->i_blocks = XFS_FSB_TO_BB(mp,
ip->i_d.di_nblocks + ip->i_delayed_blks);
@@ -1638,7 +1635,7 @@ xfs_inactive(
(XFS_DIFLAG_PREALLOC | XFS_DIFLAG_APPEND)) ||
(ip->i_delayed_blks != 0)))) {
if ((error = xfs_inactive_free_eofblocks(mp, ip)))
- return (VN_INACTIVE_CACHE);
+ return VN_INACTIVE_CACHE;
/* Update linux inode block count after free above */
LINVFS_GET_IP(vp)->i_blocks = XFS_FSB_TO_BB(mp,
ip->i_d.di_nblocks + ip->i_delayed_blks);
@@ -1649,7 +1646,7 @@ xfs_inactive(
ASSERT(ip->i_d.di_nlink == 0);
if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
- return (VN_INACTIVE_CACHE);
+ return VN_INACTIVE_CACHE;
tp = xfs_trans_alloc(mp, XFS_TRANS_INACTIVE);
if (truncate) {
@@ -1672,7 +1669,7 @@ xfs_inactive(
ASSERT(XFS_FORCED_SHUTDOWN(mp));
xfs_trans_cancel(tp, 0);
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
- return (VN_INACTIVE_CACHE);
+ return VN_INACTIVE_CACHE;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
@@ -1693,7 +1690,7 @@ xfs_inactive(
xfs_trans_cancel(tp,
XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
xfs_iunlock(ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
- return (VN_INACTIVE_CACHE);
+ return VN_INACTIVE_CACHE;
}
} else if ((ip->i_d.di_mode & S_IFMT) == S_IFLNK) {
@@ -1707,7 +1704,7 @@ xfs_inactive(
if (error) {
ASSERT(tp == NULL);
- return (VN_INACTIVE_CACHE);
+ return VN_INACTIVE_CACHE;
}
xfs_trans_ijoin(tp, ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
@@ -1720,7 +1717,7 @@ xfs_inactive(
if (error) {
ASSERT(XFS_FORCED_SHUTDOWN(mp));
xfs_trans_cancel(tp, 0);
- return (VN_INACTIVE_CACHE);
+ return VN_INACTIVE_CACHE;
}
xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
@@ -1742,7 +1739,7 @@ xfs_inactive(
* cancelled, and the inode is unlocked. Just get out.
*/
if (error)
- return (VN_INACTIVE_CACHE);
+ return VN_INACTIVE_CACHE;
} else if (ip->i_afp) {
xfs_idestroy_fork(ip, XFS_ATTR_FORK);
}
@@ -2049,8 +2046,8 @@ std_return:
abort_return:
cancel_flags |= XFS_TRANS_ABORT;
/* FALLTHROUGH */
- error_return:
+ error_return:
if (tp != NULL)
xfs_trans_cancel(tp, cancel_flags);
@@ -2724,9 +2721,9 @@ std_return:
abort_return:
cancel_flags |= XFS_TRANS_ABORT;
/* FALLTHROUGH */
+
error_return:
xfs_trans_cancel(tp, cancel_flags);
-
goto std_return;
}
/*
@@ -3199,10 +3196,12 @@ std_return:
}
return error;
- error1:
+error1:
xfs_bmap_cancel(&free_list);
cancel_flags |= XFS_TRANS_ABORT;
- error_return:
+ /* FALLTHROUGH */
+
+error_return:
xfs_trans_cancel(tp, cancel_flags);
goto std_return;
}
@@ -3618,9 +3617,9 @@ xfs_rwlock(
if (locktype == VRWLOCK_WRITE) {
xfs_ilock(ip, XFS_IOLOCK_EXCL);
} else if (locktype == VRWLOCK_TRY_READ) {
- return (xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED));
+ return xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED);
} else if (locktype == VRWLOCK_TRY_WRITE) {
- return (xfs_ilock_nowait(ip, XFS_IOLOCK_EXCL));
+ return xfs_ilock_nowait(ip, XFS_IOLOCK_EXCL);
} else {
ASSERT((locktype == VRWLOCK_READ) ||
(locktype == VRWLOCK_WRITE_DIRECT));
@@ -3868,7 +3867,7 @@ xfs_finish_reclaim(
xfs_ifunlock(ip);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
}
- return(1);
+ return 1;
}
ip->i_flags |= XFS_IRECLAIM;
write_unlock(&ih->ih_lock);
@@ -4045,7 +4044,7 @@ xfs_alloc_file_space(
offset, end_dmi_offset - offset,
0, NULL);
if (error)
- return(error);
+ return error;
}
/*
@@ -4305,7 +4304,7 @@ xfs_free_file_space(
offset, end_dmi_offset - offset,
AT_DELAY_FLAG(attr_flags), NULL);
if (error)
- return(error);
+ return error;
}
ASSERT(attr_flags & ATTR_NOLOCK ? attr_flags & ATTR_DMI : 1);
diff --git a/include/asm-v850/ptrace.h b/include/asm-v850/ptrace.h
index 7bf72bb..4f35cf2 100644
--- a/include/asm-v850/ptrace.h
+++ b/include/asm-v850/ptrace.h
@@ -92,7 +92,7 @@ struct pt_regs
/* The number of bytes used to store each register. */
#define _PT_REG_SIZE 4
-/* Offset of a general purpose register in a stuct pt_regs. */
+/* Offset of a general purpose register in a struct pt_regs. */
#define PT_GPR(num) ((num) * _PT_REG_SIZE)
/* Offsets of various special registers & fields in a struct pt_regs. */
diff --git a/include/linux/pfkeyv2.h b/include/linux/pfkeyv2.h
index 6351c40..bac0fb3 100644
--- a/include/linux/pfkeyv2.h
+++ b/include/linux/pfkeyv2.h
@@ -104,7 +104,7 @@ struct sadb_prop {
/* followed by:
struct sadb_comb sadb_combs[(sadb_prop_len +
sizeof(uint64_t) - sizeof(struct sadb_prop)) /
- sizeof(strut sadb_comb)]; */
+ sizeof(struct sadb_comb)]; */
struct sadb_comb {
uint8_t sadb_comb_auth;
diff --git a/init/Kconfig b/init/Kconfig
index 25f4d74..7efa729 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -99,7 +99,7 @@ config SWAP
default y
help
This option allows you to choose whether you want to have support
- for socalled swap devices or swap files in your kernel that are
+ for so called swap devices or swap files in your kernel that are
used to provide more virtual memory than the actual RAM present
in your computer. If unsure say Y.
diff --git a/ipc/msg.c b/ipc/msg.c
index a91b647..fbf7570 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -12,7 +12,7 @@
*
* mostly rewritten, threaded and wake-one semantics added
* MSGMAX limit removed, sysctl's added
- * (c) 1999 Manfred Spraul <manfreds@colorfullife.com>
+ * (c) 1999 Manfred Spraul <manfred@colorfullife.com>
*/
#include <linux/capability.h>
diff --git a/ipc/sem.c b/ipc/sem.c
index 46bb8a6..31fd402 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -56,7 +56,7 @@
* /proc/sysvipc/sem support (c) 1999 Dragos Acostachioaie <dragos@iname.com>
*
* SMP-threaded, sysctl's added
- * (c) 1999 Manfred Spraul <manfreds@colorfullife.com>
+ * (c) 1999 Manfred Spraul <manfred@colorfullife.com>
* Enforced range limit on SEM_UNDO
* (c) 2001 Red Hat Inc <alan@redhat.com>
* Lockless wakeup
diff --git a/ipc/util.c b/ipc/util.c
index 38b9a0a..8626219 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -7,7 +7,7 @@
* Occurs in several places in the IPC code.
* Chris Evans, <chris@ferret.lmh.ox.ac.uk>
* Nov 1999 - ipc helper functions, unified SMP locking
- * Manfred Spraul <manfreds@colorfullife.com>
+ * Manfred Spraul <manfred@colorfullife.com>
* Oct 2002 - One lock per IPC id. RCU ipc_free for lock-free grow_ary().
* Mingming Cao <cmm@us.ibm.com>
*/
diff --git a/ipc/util.h b/ipc/util.h
index fc9a28b..efaff3e 100644
--- a/ipc/util.h
+++ b/ipc/util.h
@@ -2,7 +2,7 @@
* linux/ipc/util.h
* Copyright (C) 1999 Christoph Rohland
*
- * ipc helper functions (c) 1999 Manfred Spraul <manfreds@colorfullife.com>
+ * ipc helper functions (c) 1999 Manfred Spraul <manfred@colorfullife.com>
*/
#ifndef _IPC_UTIL_H
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 5ec248c..9fd8d4f 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -38,7 +38,7 @@ config PM_DEBUG
config SOFTWARE_SUSPEND
bool "Software Suspend"
- depends on PM && SWAP && (X86 && (!SMP || SUSPEND_SMP)) || ((FVR || PPC32) && !SMP)
+ depends on PM && SWAP && (X86 && (!SMP || SUSPEND_SMP)) || ((FRV || PPC32) && !SMP)
---help---
Enable the possibility of suspending the machine.
It doesn't need APM.
diff --git a/kernel/printk.c b/kernel/printk.c
index 2251be8..13ced0f 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -11,7 +11,7 @@
* Ted Ts'o, 2/11/93.
* Modified for sysctl support, 1/8/97, Chris Horn.
* Fixed SMP synchronization, 08/08/99, Manfred Spraul
- * manfreds@colorfullife.com
+ * manfred@colorfullife.com
* Rewrote bits to get rid of console_lock
* 01Mar01 Andrew Morton <andrewm@uow.edu.au>
*/
diff --git a/sound/oss/opl3sa2.c b/sound/oss/opl3sa2.c
index 5cecdbc..0e161c6 100644
--- a/sound/oss/opl3sa2.c
+++ b/sound/oss/opl3sa2.c
@@ -530,7 +530,7 @@ static void __init attach_opl3sa2_mss(st
if (hw_config->slots[0] != -1) {
/* Did the MSS driver install? */
if(num_mixers == (initial_mixers + 1)) {
- /* The MSS mixer is installed, reroute mixers appropiately */
+ /* The MSS mixer is installed, reroute mixers appropriately */
AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_CD);
AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_SYNTH);
AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_LINE);
^ permalink raw reply related [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2008-02-03 20:17 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2008-02-03 20:17 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel, Jesper Juhl
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Adrian Bunk (4):
remove obsolete contact information from CREDITS
remove Documentation/smp.txt
move frv docs one level up
Jesper Juhl is the new trivial patches maintainer
Andre Haupt (3):
gameport: remove duplicate include
bf54x: remove duplicate include
jonada720: remove duplicate include
Clemens Koller (1):
Documentation/BUG-HUNTING whitespace cleanup
Denis Cheng (1):
Documentation: fix type error
Fengguang Wu (1):
do_invalidatepage() comment typo fix
Frank Lichtenheld (1):
vga.h: Fix prepocessor warning
Joe Perches (41):
MAINTAINERS: remove Adam Fritzler, remove his email address in other sources
MAINTAINERS: update Corey Thomas email address
arch/arm/: Spelling fixes
include/asm-arm/: Spelling fixes
arch/h8300/: Spelling fixes
arch/m32r/: Spelling fixes
arch/mips/: Spelling fixes
include/asm-mips/: Spelling fixes
arch/parisc/: Spelling fixes
include/asm-parisc/: Spelling fixes
arch/um: Spelling fixes
drivers/acpi/: Spelling fixes
include/acpi/: Spelling fixes
drivers/ata/: Spelling fixes
drivers/block/: Spelling fixes
drivers/bluetooth/: Spelling fixes
drivers/char/: Spelling fixes
drivers/edac/: Spelling fixes
drivers/firmware/: Spelling fixes
drivers/input/: Spelling fixes
drivers/isdn/: Spelling fixes
drivers/macintosh/: Spelling fixes
drivers/media/: Spelling fixes
include/media/: Spelling fixes
drivers/message/: Spelling fixes
drivers/mtd/: Spelling fixes
drivers/nubus/: Spelling fixes
drivers/parisc/: Spelling fixes
drivers/pcmcia/: Spelling fixes
drivers/scsi/: Spelling fixes
drivers/serial/: Spelling fixes
drivers/ssb/: Spelling fixes
drivers/video/: Spelling fixes
drivers/watchdog/: Spelling fixes
fs/: Spelling fixes
include/asm-frv/: Spelling fixes
include/asm-m68knommu/: Spelling fixes
include/linux/: Spelling fixes
include/scsi/: Spelling fixes
kernel/: Spelling fixes
lib/: Spelling fixes
Leonardo Chiquitto (1):
Documentation: missing proc/$PID/stat field
Li Zefan (1):
time: delete comments that refer to noexistent symbols
Marcin Ślusarz (1):
asm-*/compat.h: fix typo in comment
Masatake YAMATO (1):
correct missing a double quote in configfs.txt
Michael Opdenacker (1):
Documentation: mention email-clients.txt in SubmittingPatches
Michal Piotrowski (1):
Coding style fix drivers/serial/icom.h
Ohad Ben-Cohen (1):
fs/binfmt_elf.c: spello fix
Oliver Pinter (4):
typo fixes in net/sctp/sm_statefuns.c
typo fix in net/rfkill/rfkill.c
typo fixes in net/core/net_namespace.c
Documentation/filesystems/porting fixes
Paulius Zaleckas (1):
Spelling fixes: lenght->length
Pierre Peiffer (1):
Remove one useless extern declaration
Randy Dunlap (2):
dio: fix kernel-doc notation
doc: use correct debugfs mountpoint
Robert P. J. Day (8):
Correct explanations of "find_next" bit routines.
linux/dma-mapping.h: rename macro to prevent multiple inclusion
Fix a small number of "memeber" typoes.
Typoes: "whith" -> "with"
Documentation: "decnet=" should read "decnet.addr=".
Documentation: Update to refer to correct "rcupdate" module name
Documentation: Remove references to dead "st0x" and "tmc8xx" parms.
Documentation: Clarify when module debugging actually works.
Tim Pepper (1):
radix_tree.h trivial comment correction
Uwe Kleine-König (3):
use the newc archive format as requested by initramfs
SERIAL_NETX_CONSOLE provides console for NetX, not IMX
fix typo 'the same the\>'
CREDITS | 7 +-
Documentation/00-INDEX | 4 +-
Documentation/BUG-HUNTING | 22 +++---
Documentation/SubmittingPatches | 16 +----
Documentation/arm/Sharp-LH/IOBarrier | 2 +-
Documentation/debugging-modules.txt | 4 +
Documentation/filesystems/configfs/configfs.txt | 2 +-
Documentation/filesystems/porting | 6 +-
Documentation/filesystems/proc.txt | 1 +
.../filesystems/ramfs-rootfs-initramfs.txt | 2 +-
Documentation/filesystems/relay.txt | 2 +-
Documentation/{fujitsu => }/frv/README.txt | 0
Documentation/{fujitsu => }/frv/atomic-ops.txt | 0
Documentation/{fujitsu => }/frv/booting.txt | 2 +-
Documentation/{fujitsu => }/frv/clock.txt | 0
Documentation/{fujitsu => }/frv/configuring.txt | 0
Documentation/{fujitsu => }/frv/features.txt | 0
Documentation/{fujitsu => }/frv/gdbinit | 0
Documentation/{fujitsu => }/frv/gdbstub.txt | 0
Documentation/{fujitsu => }/frv/kernel-ABI.txt | 0
Documentation/{fujitsu => }/frv/mmu-layout.txt | 0
Documentation/initrd.txt | 2 +-
Documentation/kernel-parameters.txt | 21 +++----
Documentation/networking/decnet.txt | 2 +-
Documentation/smp.txt | 22 ------
MAINTAINERS | 13 +---
Makefile | 2 +-
arch/alpha/Kconfig | 4 +-
arch/arm/Kconfig | 3 +-
arch/arm/mach-pxa/corgi_ssp.c | 2 +-
arch/arm/mach-sa1100/collie_pm.c | 2 +-
arch/arm/plat-s3c24xx/irq.c | 2 +-
arch/frv/Kconfig | 2 +-
arch/frv/kernel/entry.S | 4 +-
arch/frv/lib/atomic-ops.S | 2 +-
arch/h8300/platform/h8s/ints.c | 2 +-
arch/ia64/Kconfig | 4 +-
arch/m32r/Kconfig | 3 +-
arch/m32r/kernel/ptrace.c | 2 +-
arch/mips/Kconfig | 4 +-
arch/mips/au1000/mtx-1/board_setup.c | 2 +-
arch/mips/kernel/binfmt_elfn32.c | 2 +-
arch/mips/kernel/binfmt_elfo32.c | 2 +-
arch/mips/kernel/kspd.c | 2 +-
arch/mips/kernel/setup.c | 4 +-
arch/mips/kernel/smtc.c | 6 +-
arch/mips/mm/c-r4k.c | 2 +-
arch/mips/sgi-ip27/ip27-hubio.c | 2 +-
arch/parisc/Kconfig | 5 +-
arch/parisc/kernel/cache.c | 2 +-
arch/parisc/kernel/hardware.c | 2 +-
arch/parisc/kernel/signal.c | 2 +-
arch/s390/Kconfig | 4 +-
arch/sh/Kconfig | 5 +-
arch/sparc/Kconfig | 5 +-
arch/sparc/kernel/ioport.c | 4 +-
arch/sparc64/Kconfig | 5 +-
arch/um/sys-x86_64/signal.c | 2 +-
arch/x86/Kconfig | 3 +-
arch/x86/lib/bitops_32.c | 2 +-
arch/x86/lib/bitops_64.c | 2 +-
drivers/acpi/scan.c | 2 +-
drivers/acpi/utilities/utresrc.c | 2 +-
drivers/ata/ata_piix.c | 2 +-
drivers/ata/libata-core.c | 2 +-
drivers/ata/pata_at32.c | 2 +-
drivers/ata/pata_efar.c | 2 +-
drivers/ata/pata_it8213.c | 2 +-
drivers/ata/pata_sis.c | 4 +-
drivers/block/cciss_scsi.c | 4 +-
drivers/bluetooth/btuart_cs.c | 2 +-
drivers/char/drm/r300_reg.h | 2 +-
drivers/char/drm/via_dma.c | 2 +-
drivers/char/efirtc.c | 2 +-
drivers/char/epca.c | 4 +-
drivers/char/hangcheck-timer.c | 2 +-
drivers/char/hvcs.c | 2 +-
drivers/char/ip2/i2lib.c | 2 +-
drivers/char/ip2/ip2main.c | 2 +-
drivers/char/synclink.c | 2 +-
drivers/char/toshiba.c | 2 +-
drivers/dio/dio-driver.c | 70 ++++++++++----------
drivers/edac/edac_pci.c | 2 +-
drivers/edac/i5000_edac.c | 2 +-
drivers/firmware/edd.c | 2 +-
drivers/ide/ide-timing.h | 2 +-
drivers/input/gameport/gameport.c | 1 -
drivers/input/keyboard/bf54x-keys.c | 1 -
drivers/input/keyboard/jornada720_kbd.c | 1 -
drivers/input/serio/gscps2.c | 2 +-
drivers/isdn/hardware/eicon/debuglib.c | 2 +-
drivers/isdn/hardware/eicon/debuglib.h | 2 +-
drivers/isdn/hardware/eicon/di.c | 2 +-
drivers/isdn/hardware/eicon/message.c | 2 +-
drivers/isdn/hysdn/hycapi.c | 2 +-
drivers/macintosh/smu.c | 4 +-
drivers/media/common/saa7146_core.c | 2 +-
drivers/media/dvb/dvb-core/dvb_net.c | 2 +-
drivers/media/video/bt8xx/bttv-cards.c | 2 +-
drivers/media/video/indycam.c | 2 +-
drivers/media/video/mt20xx.c | 2 +-
drivers/media/video/pvrusb2/pvrusb2.h | 2 +-
drivers/media/video/pwc/pwc-if.c | 2 +-
drivers/media/video/tea6420.c | 2 +-
drivers/media/video/usbvideo/quickcam_messenger.c | 2 +-
drivers/media/video/usbvision/usbvision-video.c | 2 +-
drivers/media/video/vpx3220.c | 2 +-
drivers/media/video/zoran_card.c | 2 +-
drivers/media/video/zr36050.c | 2 +-
drivers/media/video/zr36060.c | 2 +-
drivers/message/fusion/lsi/mpi_log_sas.h | 2 +-
drivers/message/fusion/mptctl.c | 8 +-
drivers/message/fusion/mptscsih.c | 2 +-
drivers/message/i2o/iop.c | 2 +-
drivers/mtd/devices/doc2000.c | 2 +-
drivers/mtd/nand/autcpu12.c | 6 +-
drivers/mtd/nand/bf5xx_nand.c | 2 +-
drivers/mtd/nand/cs553x_nand.c | 2 +-
drivers/mtd/nand/edb7312.c | 2 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/nand/nandsim.c | 2 +-
drivers/mtd/nand/s3c2410.c | 2 +-
drivers/mtd/nand/sharpsl.c | 2 +-
drivers/mtd/nftlmount.c | 2 +-
drivers/net/eexpress.c | 2 +-
drivers/net/irda/ali-ircc.h | 4 +-
drivers/net/irda/nsc-ircc.h | 4 +-
drivers/net/irda/via-ircc.h | 4 +-
drivers/net/lib8390.c | 2 +-
drivers/net/skfp/ess.c | 2 +-
drivers/net/skfp/fplustm.c | 2 +-
drivers/net/skfp/hwmtm.c | 2 +-
drivers/net/tokenring/abyss.c | 2 +-
drivers/net/tokenring/abyss.h | 2 +-
drivers/net/tokenring/madgemc.c | 2 +-
drivers/net/tokenring/madgemc.h | 2 +-
drivers/net/tokenring/proteon.c | 2 +-
drivers/net/tokenring/skisa.c | 2 +-
drivers/net/tokenring/tms380tr.c | 2 +-
drivers/net/tokenring/tms380tr.h | 2 +-
drivers/net/tokenring/tmspci.c | 2 +-
drivers/net/wan/cycx_drv.c | 4 +-
drivers/net/wireless/libertas/scan.c | 2 +-
drivers/nubus/nubus.c | 2 +-
drivers/parisc/ccio-dma.c | 4 +-
drivers/parisc/hppb.c | 2 +-
drivers/parport/probe.c | 2 +-
drivers/pcmcia/m32r_pcc.c | 2 +-
drivers/pcmcia/m8xx_pcmcia.c | 2 +-
drivers/scsi/NCR53C9x.h | 2 +-
drivers/scsi/aha1542.c | 2 +-
drivers/scsi/aic7xxx/aic79xx_inline.h | 2 +-
drivers/scsi/aic7xxx/aic79xx_osm.c | 2 +-
drivers/scsi/aic7xxx/aic79xx_pci.c | 4 +-
drivers/scsi/aic7xxx/aic7xxx_inline.h | 2 +-
drivers/scsi/aic7xxx/aic7xxx_osm.c | 2 +-
drivers/scsi/ipr.c | 2 +-
drivers/scsi/ips.c | 2 +-
drivers/scsi/lpfc/lpfc.h | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/megaraid/megaraid_mbox.c | 10 ++--
drivers/scsi/qla2xxx/qla_gs.c | 2 +-
drivers/scsi/qla4xxx/ql4_def.h | 2 +-
drivers/scsi/qla4xxx/ql4_init.c | 2 +-
drivers/scsi/scsi_tgt_lib.c | 2 +-
drivers/scsi/scsi_transport_sas.c | 2 +-
drivers/serial/Kconfig | 4 +-
drivers/serial/icom.h | 2 +-
drivers/serial/mux.c | 2 +-
drivers/spi/spi_imx.c | 2 +-
drivers/ssb/b43_pci_bridge.c | 2 +-
drivers/video/aty/radeon_pm.c | 2 +-
drivers/video/cyblafb.c | 2 +-
drivers/video/intelfb/intelfb.h | 2 +-
drivers/video/omap/lcdc.c | 2 +-
drivers/video/sm501fb.c | 2 +-
drivers/watchdog/shwdt.c | 2 +-
fs/befs/btree.c | 2 +-
fs/befs/datastream.c | 2 +-
fs/binfmt_elf.c | 2 +-
fs/freevxfs/vxfs_dir.h | 2 +-
fs/freevxfs/vxfs_immed.c | 2 +-
fs/gfs2/recovery.c | 2 +-
fs/jffs2/readinode.c | 2 +-
fs/jfs/jfs_xtree.c | 2 +-
fs/ocfs2/alloc.c | 2 +-
fs/ocfs2/dir.c | 2 +-
fs/ocfs2/ocfs1_fs_compat.h | 2 +-
fs/ocfs2/suballoc.c | 2 +-
fs/reiserfs/bitmap.c | 6 +-
fs/signalfd.c | 2 +-
include/acpi/acpixf.h | 2 +-
include/acpi/processor.h | 2 +-
include/asm-arm/arch-ixp4xx/ixp4xx-regs.h | 34 +++++-----
include/asm-arm/arch-pxa/pxa-regs.h | 34 +++++-----
include/asm-arm/arch-versatile/irqs.h | 4 +-
include/asm-arm/hardware/it8152.h | 2 +-
include/asm-arm/mach/udc_pxa2xx.h | 2 +-
include/asm-frv/atomic.h | 2 +-
include/asm-frv/bitops.h | 2 +-
include/asm-frv/cacheflush.h | 2 +-
include/asm-frv/highmem.h | 2 +-
include/asm-frv/mem-layout.h | 2 +-
include/asm-frv/pgtable.h | 2 +-
include/asm-ia64/compat.h | 2 +-
include/asm-m68knommu/bitops.h | 2 +-
include/asm-m68knommu/commproc.h | 2 +-
include/asm-m68knommu/delay.h | 2 +-
include/asm-m68knommu/m5249sim.h | 4 +-
include/asm-m68knommu/m5307sim.h | 12 ++--
include/asm-m68knommu/m5407sim.h | 12 ++--
include/asm-m68knommu/m68360_regs.h | 2 +-
include/asm-m68knommu/mcfuart.h | 2 +-
include/asm-mips/compat.h | 2 +-
include/asm-mips/mach-excite/excite_fpga.h | 2 +-
include/asm-mips/mach-wrppmc/mach-gt64120.h | 2 +-
include/asm-mips/sgi/ip22.h | 2 +-
include/asm-mips/sn/sn0/hubio.h | 2 +-
include/asm-parisc/compat.h | 2 +-
include/asm-parisc/elf.h | 2 +-
include/asm-parisc/linkage.h | 2 +-
include/asm-parisc/vga.h | 2 +-
include/asm-powerpc/compat.h | 2 +-
include/asm-s390/compat.h | 2 +-
include/asm-sparc64/compat.h | 2 +-
include/asm-x86/compat.h | 2 +-
include/asm-x86/mach-voyager/do_timer.h | 1 -
include/linux/chio.h | 2 +-
include/linux/cyclades.h | 2 +-
include/linux/cycx_x25.h | 2 +-
include/linux/dma-mapping.h | 4 +-
include/linux/dmaengine.h | 2 +-
include/linux/ethtool.h | 2 +-
include/linux/fs.h | 2 +-
include/linux/hdreg.h | 2 +-
include/linux/hrtimer.h | 1 -
include/linux/llc.h | 4 +-
include/linux/pm.h | 2 +-
include/linux/pnp.h | 2 +-
include/linux/radix-tree.h | 2 +-
include/linux/reiserfs_fs_sb.h | 2 +-
include/linux/signalfd.h | 2 +-
include/linux/sm501-regs.h | 2 +-
include/linux/spinlock_api_up.h | 2 +-
include/linux/wireless.h | 2 +-
include/media/rds.h | 2 +-
include/scsi/scsi_transport_fc.h | 2 +-
kernel/exit.c | 2 -
kernel/posix-timers.c | 2 +-
lib/crc32.c | 2 +-
lib/zlib_deflate/defutil.h | 2 +-
mm/truncate.c | 2 +-
net/core/net_namespace.c | 4 +-
net/rfkill/rfkill.c | 2 +-
net/sctp/sm_statefuns.c | 4 +-
255 files changed, 382 insertions(+), 442 deletions(-)
^ permalink raw reply [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2007-07-22 21:08 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2007-07-22 21:08 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Jan Engelhardt (1):
Convert files to UTF-8 and some cleanups
Jean Delvare (1):
Spelling fix: explicitly
John Anthony Kazos Jr (2):
crypto: convert "crypto" subdirectory to UTF-8
crypto: convert crypto.h to UTF-8
Marcin Garski (1):
more UTF-8 conversions
Patrick Ringl (1):
fix typos in drivers/block/Kconfig
Robert P. J. Day (7):
KCONFIG: Replace remaining "depends" with "depends on".
Fix misspellings of "system", "controller", "interrupt" and "necessary".
Explain clearly why kmalloc() can't use __GFP_HIGHMEM.
Remove long-dead commented-out MODULE_PARM reference.
Drop the superfluous test for an old version of gcc.
Documentation: Drop reference to dead "eicon" kernel paramter.
Documentation: Delete dead OSS-related kernel parameter.
CREDITS | 12 ++--
Documentation/cdrom/cdrom-standard.tex | 2
Documentation/filesystems/Locking | 2
Documentation/i2c/i2c-protocol | 2
Documentation/isdn/CREDITS | 2
Documentation/kernel-parameters.txt | 6 --
Documentation/mips/AU1xxx_IDE.README | 2
Documentation/spi/pxa2xx | 2
arch/arm/mach-at91/gpio.c | 2
arch/arm/mach-omap1/irq.c | 2
arch/arm/mach-omap2/io.c | 2
arch/arm/mach-omap2/timer-gp.c | 2
arch/arm/mach-s3c2410/clock.c | 2
arch/arm/mach-s3c2412/clock.c | 2
arch/arm/mach-s3c2443/clock.c | 2
arch/arm/nwfpe/fpopcode.h | 34 +++++++-------
arch/arm/plat-omap/dma.c | 2
arch/arm/plat-omap/gpio.c | 2
arch/arm26/nwfpe/fpopcode.h | 34 +++++++-------
arch/cris/arch-v10/drivers/pcf8563.c | 2
arch/cris/arch-v10/kernel/entry.S | 2
arch/cris/arch-v10/kernel/kgdb.c | 2
arch/cris/arch-v10/lib/dram_init.S | 4 -
arch/cris/arch-v32/drivers/pcf8563.c | 2
arch/cris/arch-v32/lib/dram_init.S | 2
arch/h8300/kernel/irq.c | 2
arch/i386/kernel/cpu/cpufreq/powernow-k6.c | 2
arch/i386/kernel/cpu/cyrix.c | 8 +--
arch/m68k/ifpsp060/CHANGES | 2
arch/m68k/ifpsp060/MISC | 2
arch/m68k/ifpsp060/README | 2
arch/m68k/ifpsp060/TEST.DOC | 2
arch/m68k/ifpsp060/fplsp.doc | 2
arch/m68k/ifpsp060/fpsp.doc | 2
arch/m68k/ifpsp060/fskeleton.S | 2
arch/m68k/ifpsp060/ilsp.doc | 2
arch/m68k/ifpsp060/iskeleton.S | 2
arch/m68k/ifpsp060/isp.doc | 2
arch/m68k/ifpsp060/os.S | 2
arch/m68k/ifpsp060/src/fplsp.S | 2
arch/m68k/ifpsp060/src/fpsp.S | 2
arch/m68k/ifpsp060/src/ftest.S | 2
arch/m68k/ifpsp060/src/ilsp.S | 2
arch/m68k/ifpsp060/src/isp.S | 2
arch/m68k/ifpsp060/src/itest.S | 2
arch/m68k/ifpsp060/src/pfpsp.S | 2
arch/m68k/tools/amiga/dmesg.c | 2
arch/m68knommu/platform/5307/pit.c | 2
arch/mips/ddb5xxx/ddb5477/setup.c | 2
arch/mips/kernel/module.c | 2
arch/mips/kernel/smtc.c | 2
arch/mips/kernel/vmlinux.lds.S | 2
arch/mips/pci/pci-excite.c | 2
arch/mips/sni/pcimt.c | 2
arch/powerpc/Kconfig.debug | 2
arch/powerpc/kernel/cpu_setup_6xx.S | 2
arch/powerpc/kernel/irq.c | 2
arch/powerpc/kernel/l2cr_6xx.S | 2
arch/powerpc/platforms/cell/spufs/file.c | 2
arch/powerpc/platforms/celleb/scc_uhc.c | 2
arch/ppc/platforms/apus_pci.c | 2
arch/sh64/kernel/pci_sh5.c | 2
arch/x86_64/kernel/suspend.c | 2
crypto/api.c | 2
crypto/fcrypt.c | 2
drivers/ata/ahci.c | 2
drivers/ata/libata-sff.c | 2
drivers/ata/pata_cs5530.c | 2
drivers/ata/pata_cs5535.c | 2
drivers/ata/pata_it821x.c | 4 -
drivers/ata/pata_mpiix.c | 2
drivers/ata/pata_ns87410.c | 2
drivers/ata/pata_oldpiix.c | 2
drivers/ata/pata_radisys.c | 2
drivers/ata/pata_sc1200.c | 2
drivers/ata/pata_sil680.c | 2
drivers/ata/pata_via.c | 2
drivers/atm/firestream.c | 2
drivers/block/Kconfig | 4 -
drivers/block/loop.c | 2
drivers/block/rd.c | 2
drivers/char/cyclades.c | 2
drivers/char/drm/drm_hashtab.c | 2
drivers/char/drm/drm_hashtab.h | 2
drivers/char/drm/drm_mm.c | 2
drivers/char/drm/drm_pci.c | 4 -
drivers/char/drm/drm_sarea.h | 2
drivers/char/drm/drm_sman.c | 2
drivers/char/drm/drm_sman.h | 2
drivers/char/drm/r128_drv.h | 2
drivers/char/drm/radeon_irq.c | 2
drivers/char/drm/radeon_state.c | 2
drivers/char/drm/sis_mm.c | 2
drivers/char/drm/via_mm.c | 2
drivers/char/drm/via_verifier.h | 2
drivers/char/esp.c | 2
drivers/char/hw_random/omap-rng.c | 2
drivers/char/i8k.c | 14 ++---
drivers/char/n_tty.c | 4 -
drivers/char/rocket.c | 2
drivers/char/sonypi.c | 2
drivers/char/tty_io.c | 8 +--
drivers/char/tty_ioctl.c | 2
drivers/char/watchdog/i6300esb.c | 6 +-
drivers/char/watchdog/iTCO_vendor_support.c | 2
drivers/char/watchdog/w83627hf_wdt.c | 2
drivers/char/watchdog/w83697hf_wdt.c | 2
drivers/hwmon/gl520sm.c | 4 -
drivers/hwmon/sis5595.c | 2
drivers/hwmon/via686a.c | 4 -
drivers/i2c/algos/i2c-algo-bit.c | 2
drivers/i2c/algos/i2c-algo-pca.c | 2
drivers/i2c/algos/i2c-algo-pcf.c | 2
drivers/i2c/busses/i2c-elektor.c | 2
drivers/i2c/busses/i2c-hydra.c | 2
drivers/i2c/busses/i2c-ibm_iic.c | 2
drivers/i2c/busses/i2c-omap.c | 2
drivers/i2c/busses/i2c-parport-light.c | 2
drivers/i2c/busses/i2c-parport.c | 2
drivers/i2c/busses/i2c-via.c | 4 -
drivers/i2c/busses/i2c-viapro.c | 2
drivers/i2c/i2c-core.c | 2
drivers/ide/ide-cd.c | 6 +-
drivers/ide/ide-tape.c | 2
drivers/ide/legacy/q40ide.c | 2
drivers/ide/pci/it821x.c | 4 -
drivers/ide/pci/siimage.c | 2
drivers/input/joystick/db9.c | 2
drivers/input/keyboard/omap-keypad.c | 4 -
drivers/input/mouse/psmouse-base.c | 2
drivers/input/mouse/vsxxxaa.c | 2
drivers/isdn/act2000/act2000_isa.c | 2
drivers/isdn/hardware/eicon/capifunc.c | 4 -
drivers/isdn/hisax/amd7930_fn.c | 2
drivers/isdn/hisax/enternow_pci.c | 18 +++----
drivers/isdn/hisax/hfc_pci.c | 2
drivers/isdn/hisax/isdnhdlc.c | 4 -
drivers/isdn/hisax/isdnhdlc.h | 2
drivers/isdn/hisax/jade.c | 2
drivers/isdn/pcbit/capi.c | 4 -
drivers/leds/Kconfig | 2
drivers/macintosh/via-pmu.c | 2
drivers/md/dm-crypt.c | 2
drivers/md/raid1.c | 2
drivers/media/common/saa7146_hlp.c | 2
drivers/media/dvb/bt8xx/bt878.c | 2
drivers/media/dvb/cinergyT2/cinergyT2.c | 2
drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c | 2
drivers/media/video/bt8xx/bttv-cards.c | 26 +++++-----
drivers/media/video/em28xx/em28xx-video.c | 2
drivers/media/video/meye.c | 2
drivers/media/video/meye.h | 2
drivers/media/video/saa5246a.c | 4 -
drivers/media/video/saa5249.c | 4 -
drivers/media/video/usbvideo/vicam.c | 2
drivers/media/video/v4l2-common.c | 2
drivers/message/i2o/README | 4 -
drivers/message/i2o/exec-osm.c | 4 -
drivers/message/i2o/i2o_config.c | 6 +-
drivers/message/i2o/i2o_proc.c | 4 -
drivers/message/i2o/iop.c | 4 -
drivers/message/i2o/pci.c | 4 -
drivers/misc/ibmasm/remote.c | 2
drivers/misc/sony-laptop.c | 4 -
drivers/net/8139too.c | 2
drivers/net/amd8111e.c | 4 -
drivers/net/ariadne.c | 2
drivers/net/ariadne.h | 2
drivers/net/au1000_eth.c | 2
drivers/net/bonding/bond_sysfs.c | 2
drivers/net/e100.c | 2
drivers/net/fealnx.c | 1
drivers/net/hamradio/6pack.c | 2
drivers/net/irda/actisys-sir.c | 2
drivers/net/irda/actisys.c | 2
drivers/net/irda/donauboe.c | 2
drivers/net/irda/girbil-sir.c | 2
drivers/net/irda/girbil.c | 2
drivers/net/irda/irport.h | 2
drivers/net/irda/irtty-sir.c | 2
drivers/net/irda/nsc-ircc.c | 2
drivers/net/irda/nsc-ircc.h | 2
drivers/net/irda/tekram-sir.c | 2
drivers/net/irda/tekram.c | 2
drivers/net/irda/w83977af_ir.h | 2
drivers/net/smc911x.c | 2
drivers/net/spider_net.c | 2
drivers/net/tc35815.c | 4 -
drivers/net/via-velocity.c | 2
drivers/net/wireless/bcm43xx/bcm43xx_xmit.h | 2
drivers/net/wireless/ipw2100.c | 4 -
drivers/net/wireless/ipw2200.c | 2
drivers/net/wireless/netwave_cs.c | 8 +--
drivers/s390/block/dasd_3990_erp.c | 4 -
drivers/s390/char/sclp_cpi.c | 2
drivers/s390/cio/cmf.c | 2
drivers/s390/net/ctcmain.c | 10 ++--
drivers/scsi/aacraid/aacraid.h | 2
drivers/scsi/aha152x.c | 6 +-
drivers/scsi/aic7xxx/cam.h | 2
drivers/scsi/dc395x.c | 6 +-
drivers/scsi/megaraid/megaraid_mbox.c | 2
drivers/scsi/qla4xxx/ql4_init.c | 2
drivers/scsi/sd.c | 2
drivers/scsi/sun3_NCR5380.c | 2
drivers/scsi/sym53c8xx_2/sym_fw2.h | 2
drivers/scsi/wd33c93.h | 2
drivers/serial/s3c2410.c | 4 -
drivers/spi/mpc52xx_psc_spi.c | 2
drivers/usb/gadget/lh7a40x_udc.c | 2
drivers/usb/host/ehci-hub.c | 2
drivers/usb/host/sl811-hcd.c | 2
drivers/usb/misc/cytherm.c | 2
drivers/usb/misc/emi26.c | 4 -
drivers/usb/misc/emi62.c | 4 -
drivers/usb/serial/ChangeLog.history | 2
drivers/usb/serial/ftdi_sio.c | 2
drivers/usb/serial/ftdi_sio.h | 6 +-
drivers/usb/serial/ipaq.c | 4 -
drivers/usb/storage/isd200.c | 2
drivers/usb/storage/unusual_devs.h | 4 -
drivers/video/amifb.c | 14 ++---
drivers/video/aty/atyfb_base.c | 2
drivers/video/intelfb/intelfbdrv.c | 2
drivers/video/intelfb/intelfbhw.c | 2
drivers/video/s3c2410fb.c | 4 -
drivers/video/tdfxfb.c | 2
drivers/video/vermilion/vermilion.c | 4 -
drivers/video/vermilion/vermilion.h | 2
drivers/zorro/zorro.ids | 2
fs/binfmt_em86.c | 2
fs/binfmt_misc.c | 2
fs/binfmt_script.c | 2
fs/isofs/inode.c | 2
fs/jfs/jfs_dtree.c | 2
fs/nfs/nfsroot.c | 2
fs/ntfs/ChangeLog | 2
fs/ntfs/sysctl.c | 2
fs/ntfs/sysctl.h | 2
fs/ocfs2/dcache.c | 2
fs/reiserfs/super.c | 2
fs/super.c | 6 +-
include/asm-arm/arch-aaec2000/aaec2000.h | 4 -
include/asm-arm/dma-mapping.h | 2
include/asm-mips/pci/bridge.h | 2
include/asm-powerpc/io.h | 2
include/asm-sh/se7751.h | 2
include/asm-sh/systemh7751.h | 2
include/linux/cdrom.h | 2
include/linux/crypto.h | 2
include/linux/ipmi_smi.h | 2
include/net/irda/irttp.h | 4 -
init/main.c | 8 ---
kernel/hrtimer.c | 2
kernel/sched.c | 4 -
kernel/taskstats.c | 2
lib/kobject_uevent.c | 2
mm/nommu.c | 3 -
net/ax25/ax25_ds_in.c | 2
net/ax25/ax25_ds_subr.c | 2
net/bluetooth/bnep/core.c | 2
net/bluetooth/bnep/netdev.c | 2
net/bridge/netfilter/ebtables.c | 2
net/core/pktgen.c | 2
net/ieee80211/ieee80211_wx.c | 2
net/irda/discovery.c | 2
net/irda/iriap.c | 2
net/irda/iriap_event.c | 2
net/irda/irias_object.c | 2
net/irda/irlan/irlan_client.c | 2
net/irda/irlan/irlan_client_event.c | 2
net/irda/irlan/irlan_common.c | 2
net/irda/irlan/irlan_eth.c | 2
net/irda/irlan/irlan_event.c | 2
net/irda/irlan/irlan_filter.c | 2
net/irda/irlan/irlan_provider.c | 2
net/irda/irlan/irlan_provider_event.c | 2
net/irda/irlap_event.c | 2
net/irda/irlap_frame.c | 2
net/irda/irlmp.c | 2
net/irda/irlmp_event.c | 2
net/irda/irlmp_frame.c | 2
net/irda/irmod.c | 2
net/irda/irqueue.c | 2
net/irda/irsysctl.c | 2
net/irda/irttp.c | 2
net/irda/timer.c | 2
net/irda/wrapper.c | 2
net/iucv/iucv.c | 2
net/netfilter/xt_CONNMARK.c | 2
net/netfilter/xt_connmark.c | 2
net/netfilter/xt_limit.c | 4 -
net/sched/em_meta.c | 2
sound/core/seq/seq_midi_emul.c | 8 +--
sound/drivers/opl3/opl3_midi.c | 2
sound/isa/es18xx.c | 4 -
sound/mips/au1x00.c | 8 +--
sound/pci/au88x0/au88x0.c | 2
sound/soc/soc-core.c | 2
sound/soc/soc-dapm.c | 2
sound/synth/emux/emux_synth.c | 2
301 files changed, 438 insertions(+), 452 deletions(-)
^ permalink raw reply [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2007-05-11 17:15 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2007-05-11 17:15 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
David Woodhouse (1):
further UTF-8 fixes and name correction
Satyam Sharma (1):
Fix wrong identifier name in Documentation/kref.txt
CREDITS | 4 ++--
Documentation/kref.txt | 2 +-
include/asm-m68k/atarihw.h | 2 +-
include/asm-m68k/atariints.h | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2007-05-09 9:30 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2007-05-09 9:30 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Alexander E. Patrakov (1):
Remove obsolete fat_cvf help text
Artem Bityutskiy (1):
trivial: s/i_sem /i_mutex/
David Sterba (1):
Fix trivial typos in Kconfig* files
Jesper Juhl (1):
Magic number prefix consistency change to Documentation/magic-number.txt
John Anthony Kazos Jr (5):
Convert the toplevel files CREDITS and MAINTAINERS to UTF-8.
documentation: convert the Documentation directory to UTF-8
general: convert "kernel" subdirectory to UTF-8
include files: convert "include" subdirectory to UTF-8
sound: convert "sound" subdirectory to UTF-8
Markus Dahms (1):
remove broken URLs from net drivers' output
Matt LaPlante (1):
misc doc and kconfig typos
Michael Opdenacker (1):
Fix occurrences of "the the "
Márton Németh (1):
drivers/base/platform.c: fix small typo in doc
Randy Dunlap (2):
devres: kernel-doc and DocBook
Fix more "deprecated" spellos.
Robert P. J. Day (6):
Fix misspellings collected by members of KJ list.
Fix "deprecated" typoes.
Correct comments in genrtc.c to refer to correct /proc file.
Kconfig: A couple of grammatical fixes in arch/i386/Kconfig
Kconfig: Remove reference to external mqueue library
Fix minor typoes in kernel/module.c
Ronni Nielsen (1):
fs/libfs.c: >80 columns line break fix
Simon Arlott (1):
MAINTAINERS: Add cxacru website/mailing list
Uwe Kleine-König (1):
fix file specification in comments
WANG Cong (1):
Style fix in fs/select.c
CREDITS | 44 +++++++-------
Documentation/ABI/removed/devfs | 2
Documentation/DocBook/kernel-api.tmpl | 4 +
Documentation/MSI-HOWTO.txt | 6 -
Documentation/arm/Interrupts | 2
Documentation/arm/Samsung-S3C24XX/H1940.txt | 4 -
Documentation/auxdisplay/cfag12864b | 6 -
Documentation/binfmt_misc.txt | 2
Documentation/block/ioprio.txt | 8 +-
Documentation/cpu-freq/cpufreq-stats.txt | 2
Documentation/crypto/api-intro.txt | 6 -
Documentation/driver-model/platform.txt | 4 -
Documentation/dvb/README.dvb-usb | 2
Documentation/dvb/contributors.txt | 2
Documentation/fb/aty128fb.txt | 4 -
Documentation/fb/framebuffer.txt | 16 ++---
Documentation/fb/imacfb.txt | 2
Documentation/fb/sstfb.txt | 4 -
Documentation/filesystems/Locking | 6 -
Documentation/filesystems/hpfs.txt | 2
Documentation/filesystems/ntfs.txt | 2
Documentation/filesystems/proc.txt | 2
Documentation/filesystems/relay.txt | 2
Documentation/filesystems/xip.txt | 2
Documentation/fujitsu/frv/gdbstub.txt | 2
Documentation/hwmon/adm1026 | 2
Documentation/hwmon/gl518sm | 2
Documentation/hwmon/lm83 | 2
Documentation/hwmon/sis5595 | 2
Documentation/hwmon/via686a | 2
Documentation/hwmon/w83792d | 2
Documentation/i2c/busses/i2c-i810 | 2
Documentation/i2c/busses/i2c-sis96x | 2
Documentation/i2c/busses/i2c-via | 2
Documentation/i2c/busses/i2c-viapro | 2
Documentation/i2c/i2c-protocol | 2
Documentation/i2o/README | 4 -
Documentation/input/atarikbd.txt | 4 -
Documentation/input/xpad.txt | 6 -
Documentation/isdn/CREDITS | 4 -
Documentation/isdn/README | 2
Documentation/isdn/README.icn | 4 -
Documentation/java.txt | 2
Documentation/kernel-docs.txt | 2
Documentation/m68k/README.buddha | 2
Documentation/magic-number.txt | 2
Documentation/netlabel/introduction.txt | 2
Documentation/networking/6pack.txt | 2
Documentation/networking/NAPI_HOWTO.txt | 2
Documentation/networking/packet_mmap.txt | 2
Documentation/networking/slicecom.hun | 2
Documentation/networking/slicecom.txt | 4 -
Documentation/networking/tms380tr.txt | 42 ++++++-------
Documentation/networking/udplite.txt | 2
Documentation/networking/wan-router.txt | 4 -
Documentation/pci.txt | 2
Documentation/pcieaer-howto.txt | 2
Documentation/pnp.txt | 2
Documentation/power/swsusp.txt | 2
Documentation/powerpc/booting-without-of.txt | 4 -
Documentation/s390/Debugging390.txt | 2
Documentation/scsi/aha152x.txt | 2
Documentation/scsi/aic7xxx.txt | 2
Documentation/scsi/aic7xxx_old.txt | 2
Documentation/scsi/ncr53c8xx.txt | 2
Documentation/scsi/st.txt | 2
Documentation/scsi/sym53c8xx_2.txt | 2
Documentation/scsi/tmscsim.txt | 2
Documentation/sonypi.txt | 2
Documentation/sound/oss/mwave | 2
Documentation/sysctl/kernel.txt | 4 -
Documentation/usb/CREDITS | 2
Documentation/usb/usb-serial.txt | 6 -
Documentation/video4linux/README.pvrusb2 | 2
Documentation/video4linux/Zoran | 2
Documentation/video4linux/meye.txt | 2
Documentation/video4linux/ov511.txt | 4 -
MAINTAINERS | 6 +
arch/arm/mach-at91/Kconfig | 2
arch/arm/mach-omap1/Kconfig | 2
arch/arm/mach-s3c2410/sleep.S | 2
arch/arm/plat-s3c24xx/sleep.S | 2
arch/cris/arch-v32/drivers/Kconfig | 2
arch/h8300/Kconfig.debug | 4 -
arch/i386/Kconfig | 4 -
arch/i386/Kconfig.cpu | 4 -
arch/i386/kernel/cpu/mcheck/therm_throt.c | 2
arch/ia64/Kconfig | 2
arch/m68knommu/Kconfig.debug | 2
arch/mips/Kconfig | 6 -
arch/mips/Makefile | 2
arch/mips/pci/fixup-sb1250.c | 4 -
arch/powerpc/Kconfig.debug | 2
arch/powerpc/oprofile/op_model_cell.c | 2
arch/powerpc/platforms/8xx/mpc86xads_setup.c | 2
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 2
arch/powerpc/platforms/cell/io-workarounds.c | 2
arch/ppc/platforms/mpc866ads_setup.c | 2
arch/ppc/syslib/ipic.c | 2
arch/s390/crypto/Kconfig | 2
arch/sh/boards/se/7751/setup.c | 2
arch/sh/kernel/cpu/sh3/entry.S | 2
arch/sh/kernel/cpu/sh4a/clock-sh73180.c | 2
arch/sh/kernel/cpu/sh4a/clock-sh7343.c | 2
arch/sh/kernel/cpu/sh4a/clock-sh7770.c | 2
arch/sh/kernel/cpu/sh4a/clock-sh7780.c | 2
arch/sh/kernel/vsyscall/vsyscall.c | 2
arch/um/include/sysdep-i386/archsetjmp.h | 2
arch/um/include/sysdep-x86_64/archsetjmp.h | 2
arch/v850/kernel/entry.S | 2
arch/x86_64/kernel/io_apic.c | 2
arch/xtensa/kernel/pci-dma.c | 2
block/ll_rw_blk.c | 2
crypto/Kconfig | 2
drivers/ata/Kconfig | 2
drivers/base/devres.c | 32 +++++-----
drivers/base/platform.c | 2
drivers/block/rd.c | 2
drivers/char/drm/drm_dma.c | 2
drivers/char/drm/drm_vm.c | 2
drivers/char/drm/r300_reg.h | 2
drivers/char/genrtc.c | 4 -
drivers/char/pcmcia/cm4000_cs.c | 2
drivers/char/tpm/Kconfig | 2
drivers/char/tty_io.c | 8 +-
drivers/crypto/Kconfig | 2
drivers/ide/pci/siimage.c | 2
drivers/ieee1394/nodemgr.c | 2
drivers/isdn/capi/Kconfig | 2
drivers/isdn/hardware/eicon/divasync.h | 2
drivers/isdn/hisax/hfc_usb.c | 4 -
drivers/leds/leds-h1940.c | 2
drivers/macintosh/Kconfig | 2
drivers/media/dvb/dvb-usb/dvb-usb-remote.c | 2
drivers/media/dvb/frontends/dib7000m.c | 2
drivers/media/dvb/frontends/dib7000p.c | 2
drivers/media/dvb/frontends/tda10021.c | 2
drivers/media/dvb/frontends/ves1x93.c | 2
drivers/media/video/em28xx/em28xx-i2c.c | 2
drivers/media/video/em28xx/em28xx-video.c | 2
drivers/media/video/pwc/philips.txt | 6 -
drivers/media/video/usbvideo/vicam.c | 2
drivers/message/fusion/lsi/mpi_history.txt | 2
drivers/message/fusion/mptbase.c | 2
drivers/mtd/maps/Kconfig | 2
drivers/mtd/maps/nettel.c | 2
drivers/mtd/onenand/onenand_base.c | 2
drivers/net/3c509.c | 5 -
drivers/net/3c59x.c | 2
drivers/net/atp.c | 8 --
drivers/net/bonding/bond_main.c | 2
drivers/net/eepro.c | 2
drivers/net/eepro100.c | 2
drivers/net/epic100.c | 10 +--
drivers/net/hamradio/Kconfig | 2
drivers/net/irda/donauboe.h | 2
drivers/net/ixgb/ixgb_ee.c | 2
drivers/net/meth.h | 2
drivers/net/natsemi.c | 1
drivers/net/ne2k-pci.c | 3
drivers/net/sundance.c | 3
drivers/net/tulip/interrupt.c | 2
drivers/net/tulip/winbond-840.c | 2
drivers/net/tulip/xircom_cb.c | 2
drivers/net/typhoon.c | 2
drivers/net/wireless/airport.c | 2
drivers/net/wireless/prism54/isl_ioctl.c | 2
drivers/net/wireless/prism54/islpci_dev.c | 2
drivers/net/wireless/wavelan_cs.c | 4 -
drivers/net/wireless/wavelan_cs.p.h | 2
drivers/net/yellowfin.c | 1
drivers/pci/pci-driver.c | 2
drivers/rtc/Kconfig | 2
drivers/s390/char/sclp_rw.c | 2
drivers/s390/net/qeth_main.c | 2
drivers/s390/scsi/zfcp_qdio.c | 2
drivers/sbus/char/bpp.c | 2
drivers/scsi/aic7xxx/aic79xx_pci.c | 2
drivers/scsi/aic94xx/Makefile | 2
drivers/scsi/dc395x.c | 6 -
drivers/scsi/scsi_lib.c | 2
drivers/usb/misc/auerswald.c | 2
drivers/usb/net/usbnet.h | 2
drivers/usb/serial/Kconfig | 2
drivers/usb/serial/aircable.c | 4 -
drivers/usb/serial/io_edgeport.c | 4 -
drivers/video/console/softcursor.c | 2
drivers/video/i810/i810_main.c | 2
drivers/video/matrox/matroxfb_Ti3026.c | 2
drivers/video/matrox/matroxfb_accel.c | 2
drivers/video/matrox/matroxfb_base.c | 2
drivers/video/matrox/matroxfb_misc.c | 2
drivers/video/skeletonfb.c | 2
fs/Kconfig | 4 -
fs/direct-io.c | 2
fs/jbd/checkpoint.c | 2
fs/jbd/recovery.c | 2
fs/jbd/revoke.c | 2
fs/jbd/transaction.c | 2
fs/jbd2/checkpoint.c | 2
fs/jbd2/recovery.c | 2
fs/jbd2/revoke.c | 2
fs/jbd2/transaction.c | 2
fs/jfs/jfs_dmap.c | 2
fs/jfs/jfs_imap.c | 4 -
fs/jfs/jfs_logmgr.c | 2
fs/libfs.c | 5 +
fs/reiserfs/journal.c | 4 -
fs/select.c | 4 -
fs/xfs/xfs_itable.c | 2
include/asm-arm/arch-imx/imx-regs.h | 2
include/asm-arm/arch-integrator/platform.h | 2
include/asm-arm/arch-iop32x/glantank.h | 2
include/asm-arm/arch-iop32x/n2100.h | 2
include/asm-arm/arch-omap/board.h | 2
include/asm-arm/arch-omap/dma.h | 2
include/asm-arm/arch-omap/gpio.h | 2
include/asm-arm/arch-s3c2410/regs-power.h | 2
include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h | 2
include/asm-arm/arch-s3c2410/regs-watchdog.h | 2
include/asm-arm/arch-s3c2410/udc.h | 2
include/asm-arm/dma-mapping.h | 2
include/asm-arm26/io.h | 2
include/asm-arm26/memory.h | 4 -
include/asm-arm26/setup.h | 2
include/asm-generic/bitops/atomic.h | 2
include/asm-i386/bitops.h | 2
include/asm-i386/boot.h | 2
include/asm-i386/sync_bitops.h | 2
include/asm-m32r/system.h | 2
include/asm-m68k/atarihw.h | 2
include/asm-m68k/atariints.h | 2
include/asm-mips/bootinfo.h | 2
include/asm-powerpc/ppc-pci.h | 2
include/asm-ppc/hydra.h | 2
include/asm-sh/edosk7705.h | 2
include/asm-sh/snapgear.h | 2
include/asm-xtensa/platform-iss/simcall.h | 2
include/linux/ext3_fs_i.h | 2
include/linux/ext4_fs_i.h | 2
include/linux/generic_acl.h | 2
include/linux/i2c-algo-bit.h | 2
include/linux/i2c-algo-pcf.h | 2
include/linux/irda.h | 2
include/linux/meye.h | 2
include/linux/mount.h | 2
include/linux/radix-tree.h | 4 -
include/linux/security.h | 2
include/linux/sonypi.h | 2
include/linux/usb.h | 2
include/net/irda/af_irda.h | 2
include/net/irda/irda.h | 2
include/net/irda/iriap.h | 2
include/net/irda/iriap_event.h | 2
include/net/irda/irias_object.h | 2
include/net/irda/irlan_client.h | 2
include/net/irda/irlan_common.h | 2
include/net/irda/irlan_eth.h | 2
include/net/irda/irlan_event.h | 2
include/net/irda/irlan_filter.h | 2
include/net/irda/irlan_provider.h | 2
include/net/irda/irlap.h | 2
include/net/irda/irlmp.h | 2
include/net/irda/irlmp_event.h | 2
include/net/irda/irlmp_frame.h | 2
include/net/irda/irmod.h | 2
include/net/irda/irqueue.h | 2
include/net/irda/irttp.h | 2
include/net/irda/parameters.h | 2
include/net/irda/timer.h | 2
include/net/irda/wrapper.h | 2
init/Kconfig | 6 -
kernel/Kconfig.preempt | 4 -
kernel/module.c | 10 +--
kernel/relay.c | 2
kernel/sys.c | 2
kernel/wait.c | 2
mm/mmap.c | 2
net/decnet/af_decnet.c | 2
net/ipv4/Kconfig | 4 -
net/ipv4/cipso_ipv4.c | 2
net/ipv4/ipvs/ip_vs_sed.c | 2
net/ipv4/udp.c | 2
net/ipv6/netfilter/Kconfig | 2
net/llc/af_llc.c | 2
net/netfilter/Kconfig | 2
net/netfilter/nf_conntrack_expect.c | 2
net/sctp/chunk.c | 2
net/sctp/socket.c | 4 -
net/sunrpc/svcauth.c | 2
scripts/basic/docproc.c | 2
security/selinux/Kconfig | 2
sound/core/Kconfig | 2
sound/oss/es1371.c | 2
sound/oss/pas2_pcm.c | 2
sound/oss/trident.c | 4 -
sound/pci/ac97/ac97_codec.c | 2
sound/pci/ice1712/delta.h | 4 -
sound/pci/mixart/mixart.c | 2
sound/soc/pxa/pxa2xx-ac97.h | 2
sound/soc/pxa/pxa2xx-i2s.h | 2
sound/sparc/dbri.c | 2
302 files changed, 438 insertions(+), 444 deletions(-)
^ permalink raw reply [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2007-02-18 1:12 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2007-02-18 1:12 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Adrian Bunk (1):
correct a dead URL in the IP_MULTICAST help text
Erik Hovland (1):
trivial documentation patch for platform.txt
James Nelson (1):
Documentation/kernel-docs.txt update.
Jesper Juhl (2):
Remove duplicate listing of Cris arch from README
update I/O sched Kconfig help texts - CFQ is now default, not AS.
John Daiker (1):
add a help text for BLK_DEV_GENERIC
Matthew Wilcox (1):
fix SCSI_SCAN_ASYNC help text
Nicolas Kaiser (1):
arch/cris: typo in KERN_INFO
Patrick Pletscher (1):
kernel/printk.c: comment fix
Randy Dunlap (2):
doc: make doc. for maxcpus= more visible
kbuild: more doc. cleanups
Robert P. J. Day (9):
kbuild: Replace remaining "depends" with "depends on"
Various typo fixes.
Use ARRAY_SIZE() macro in i386 relocs.c file
Replace remaining references to "driverfs" with "sysfs".
Remove useless FIND_FIRST_BIT() macro from cardbus.c.
Correct trivial typo in log2.h.
drivers/scsi/a100u2w.c: trivial typo patch
Fix misspellings of "agressive".
Fix comment typo "spin_lock_irqrestore".
Shane Shrybman (1):
drivers/net/eexpress.c: remove duplicate comment
Simon Depiets (1):
fix the BAYCOM_SER_HDX help text
Tobias Klauser (1):
Storage class should be before const qualifier
Uwe Kleine-König (1):
Fix typos concerning hierarchy
Willy Tarreau (1):
rio: typo in bitwise AND expression.
Documentation/driver-model/platform.txt | 4
Documentation/filesystems/sysfs-pci.txt | 2
Documentation/kbuild/makefiles.txt | 28 -
Documentation/kernel-docs.txt | 257 ++++++--------
Documentation/kernel-parameters.txt | 9
Documentation/sh/new-machine.txt | 4
Documentation/video4linux/bttv/Insmod-options | 2
README | 2
arch/arm/Kconfig | 2
arch/arm/mm/Kconfig | 2
arch/cris/arch-v10/drivers/pcf8563.c | 2
arch/cris/arch-v32/drivers/pcf8563.c | 2
arch/i386/boot/compressed/relocs.c | 9
arch/i386/kernel/topology.c | 2
arch/i386/oprofile/nmi_int.c | 14
arch/ia64/kernel/perfmon.c | 2
arch/m32r/lib/usercopy.c | 4
arch/m68knommu/platform/5307/timers.c | 2
arch/mips/kernel/machine_kexec.c | 4
arch/parisc/kernel/topology.c | 2
arch/powerpc/kernel/rtas.c | 2
arch/powerpc/mm/numa.c | 2
arch/sh/kernel/cpu/sh2/clock-sh7619.c | 4
arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 4
arch/v850/Kconfig | 2
arch/x86_64/kernel/time.c | 2
block/Kconfig.iosched | 9
drivers/base/cpu.c | 2
drivers/base/node.c | 2
drivers/char/rio/rio_linux.c | 2
drivers/i2c/busses/i2c-ali1535.c | 2
drivers/i2c/busses/i2c-ali15x3.c | 2
drivers/i2c/busses/i2c-amd756.c | 2
drivers/i2c/busses/i2c-amd8111.c | 2
drivers/i2c/busses/i2c-i801.c | 2
drivers/i2c/busses/i2c-piix4.c | 2
drivers/i2c/busses/i2c-sis5595.c | 2
drivers/i2c/busses/i2c-sis630.c | 2
drivers/i2c/busses/i2c-sis96x.c | 2
drivers/i2c/busses/i2c-via.c | 2
drivers/ide/Kconfig | 3
drivers/ieee1394/ohci1394.c | 2
drivers/infiniband/hw/ipath/ipath_iba6110.c | 2
drivers/infiniband/hw/ipath/ipath_iba6120.c | 2
drivers/input/serio/libps2.c | 2
drivers/isdn/i4l/isdn_ppp.c | 2
drivers/media/dvb/dvb-core/dvb_frontend.c | 2
drivers/media/dvb/frontends/dib3000mb.c | 2
drivers/media/video/pvrusb2/pvrusb2-audio.c | 2
drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c | 2
drivers/media/video/pvrusb2/pvrusb2-std.c | 4
drivers/media/video/pvrusb2/pvrusb2-tuner.c | 2
drivers/media/video/pvrusb2/pvrusb2-video-v4l.c | 2
drivers/media/video/pvrusb2/pvrusb2-wm8775.c | 2
drivers/net/e1000/e1000_hw.h | 2
drivers/net/eexpress.c | 7
drivers/net/hamradio/Kconfig | 3
drivers/net/wireless/wavelan_cs.c | 8
drivers/pci/pcie/aer/aerdrv.h | 2
drivers/pcmcia/cardbus.c | 2
drivers/sbus/char/vfc_i2c.c | 2
drivers/scsi/Kconfig | 5
drivers/scsi/a100u2w.c | 2
drivers/scsi/arm/eesox.c | 2
drivers/scsi/osst.c | 12
drivers/scsi/scsi_scan.c | 2
drivers/scsi/scsi_transport_fc.c | 2
drivers/scsi/scsi_transport_sas.c | 4
drivers/scsi/st.c | 38 +-
drivers/scsi/sym53c8xx_2/sym_fw1.h | 4
drivers/scsi/sym53c8xx_2/sym_fw2.h | 4
drivers/usb/host/ehci-dbg.c | 2
fs/cifs/README | 2
fs/cifs/cifssmb.c | 4
fs/ext4/extents.c | 14
fs/lockd/svc.c | 2
fs/ocfs2/namei.c | 2
include/asm-arm/uaccess.h | 6
include/asm-arm26/uaccess.h | 10
include/asm-ia64/kexec.h | 2
include/asm-ia64/pal.h | 14
include/linux/device.h | 4
include/linux/ext4_fs_extents.h | 4
include/linux/log2.h | 2
include/linux/moduleparam.h | 2
include/linux/seqlock.h | 2
kernel/printk.c | 2
lib/textsearch.c | 2
net/ipv4/Kconfig | 2
net/ipv4/tcp_cong.c | 2
90 files changed, 304 insertions(+), 314 deletions(-)
^ permalink raw reply [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-12-12 23:48 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-12-12 23:48 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Alistair John Strachan (1):
include/linux/compiler.h: reject gcc 3 < gcc 3.2
Cal Peake (1):
Fix inotify maintainers entry
Dave Jones (2):
Jon needs a new shift key.
Fix typo in new debug options.
Jan Engelhardt (1):
EXT{2,3,4}_FS: remove outdated part of the help text
Jesper Juhl (1):
Kconfig: fix spelling error in config KALLSYMS help text
Peter Zijlstra (1):
fix typo in net/ipv4/ip_fragment.c
Robert P. J. Day (3):
kconfig: Standardize "depends" -> "depends on" in Kconfig files
configfs.h: Remove dead macro definitions.
fs: Convert kmalloc() + memset() to kzalloc() in fs/.
Rolf Eike Beer (1):
Remove duplicate "have to" in comment
Samuel Tardieu (1):
Use consistent casing in help message
Thomas Hisch (1):
Fix small typo in drivers/serial/icom.c
Yan Burman (2):
um: replace kmalloc+memset with kzalloc
e100: replace kmalloc with kcalloc
Documentation/kbuild/kconfig-language.txt | 8 +++---
MAINTAINERS | 6 +++-
Makefile | 4 +--
arch/arm/mach-pxa/Kconfig | 16 ++++++------
arch/arm/plat-omap/Kconfig | 2 -
arch/powerpc/platforms/4xx/Kconfig | 2 -
arch/powerpc/platforms/embedded6xx/Kconfig | 2 -
arch/ppc/Kconfig | 4 +--
arch/ppc/platforms/4xx/Kconfig | 2 -
arch/um/drivers/net_kern.c | 3 --
arch/v850/Kconfig | 28 ++++++++++-----------
drivers/char/Kconfig | 2 -
drivers/ide/Kconfig | 2 -
drivers/leds/Kconfig | 22 ++++++++--------
drivers/media/video/ov7670.c | 2 -
drivers/net/e100.c | 3 --
drivers/serial/Kconfig | 4 +--
drivers/serial/icom.c | 2 -
fs/Kconfig | 14 +++-------
fs/binfmt_elf_fdpic.c | 3 --
include/linux/compiler.h | 2 -
include/linux/configfs.h | 25 ------------------
include/linux/sysctl.h | 2 -
init/Kconfig | 2 -
lib/Kconfig.debug | 2 -
net/ipv4/ip_fragment.c | 2 -
sound/aoa/fabrics/Kconfig | 2 -
27 files changed, 68 insertions(+), 100 deletions(-)
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index 125093c..536d5bf 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -29,7 +29,7 @@ them. A single configuration option is defined like this:
config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
help
Usually, modules have to be recompiled whenever you switch to a new
kernel. ...
@@ -163,7 +163,7 @@ The position of a menu entry in the tree is determined in two ways. First
it can be specified explicitly:
menu "Network device support"
- depends NET
+ depends on NET
config NETDEVICES
...
@@ -188,10 +188,10 @@ config MODULES
config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
comment "module support disabled"
- depends !MODULES
+ depends on !MODULES
MODVERSIONS directly depends on MODULES, this means it's only visible if
MODULES is different from 'n'. The comment on the other hand is always
diff --git a/MAINTAINERS b/MAINTAINERS
index b202493..9649ed9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1504,8 +1504,10 @@ T: git kernel.org:/pub/scm/linux/kernel/git/dtor/input.git
S: Maintained
INOTIFY
-P: John McCutchan and Robert Love
-M: ttb@tentacle.dhs.org and rml@novell.com
+P: John McCutchan
+M: ttb@tentacle.dhs.org
+P: Robert Love
+M: rml@novell.com
L: linux-kernel@vger.kernel.org
S: Maintained
diff --git a/Makefile b/Makefile
index 73e825b..4eabaa8 100644
--- a/Makefile
+++ b/Makefile
@@ -1100,9 +1100,9 @@ boards := $(notdir $(boards))
help:
@echo 'Cleaning targets:'
- @echo ' clean - remove most generated files but keep the config and'
+ @echo ' clean - Remove most generated files but keep the config and'
@echo ' enough build support to build external modules'
- @echo ' mrproper - remove all generated files + config + various backup files'
+ @echo ' mrproper - Remove all generated files + config + various backup files'
@echo ' distclean - mrproper + remove editor backup and patch files'
@echo ''
@echo 'Configuration targets:'
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 9e3d0bd..5c0a100 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -75,28 +75,28 @@ endmenu
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select SHARP_LOCOMO
select PXA_SSP
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
@@ -104,17 +104,17 @@ config MACH_AKITA
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
config PXA25x
bool
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ec752e1..f2dc363 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -113,7 +113,7 @@ endchoice
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
- depends OMAP_MUX
+ depends on OMAP_MUX
default y
help
Select this option if you want to have your system wake up
diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig
index ed39d6a..2f2a13e 100644
--- a/arch/powerpc/platforms/4xx/Kconfig
+++ b/arch/powerpc/platforms/4xx/Kconfig
@@ -179,7 +179,7 @@ config BIOS_FIXUP
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index ddbe398..b3c2ce4 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -35,7 +35,7 @@ config HDPU
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 692b5ba..8eb82ef 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -624,7 +624,7 @@ config HDPU
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
@@ -735,7 +735,7 @@ config LITE5200
config LITE5200B
bool "Freescale LITE5200B"
- depends LITE5200
+ depends on LITE5200
help
Support for the LITE5200B dev board for the MPC5200 from Freescale.
This is the new board with 2 PCI slots.
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 293bd48..6980de4 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -189,7 +189,7 @@ config BIOS_FIXUP
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 286bc0b..b2e9762 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -334,13 +334,12 @@ static int eth_configure(int n, void *init, char *mac,
size = transport->private_size + sizeof(struct uml_net_private) +
sizeof(((struct uml_net_private *) 0)->user);
- device = kmalloc(sizeof(*device), GFP_KERNEL);
+ device = kzalloc(sizeof(*device), GFP_KERNEL);
if (device == NULL) {
printk(KERN_ERR "eth_configure failed to allocate uml_net\n");
return(1);
}
- memset(device, 0, sizeof(*device));
INIT_LIST_HEAD(&device->list);
device->index = n;
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
index bcf8258..f0d4d72 100644
--- a/arch/v850/Kconfig
+++ b/arch/v850/Kconfig
@@ -105,17 +105,17 @@ menu "Processor type and features"
# currently support
config V850E_MA1
bool
- depends RTE_CB_MA1
+ depends on RTE_CB_MA1
default y
# Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
config V850E_TEG
bool
- depends RTE_CB_NB85E
+ depends on RTE_CB_NB85E
default y
# ... and the RTE-V850E/ME2-CB - V850E/ME2
config V850E_ME2
bool
- depends RTE_CB_ME2
+ depends on RTE_CB_ME2
default y
@@ -123,7 +123,7 @@ menu "Processor type and features"
config V850E2_SIM85E2
bool
- depends V850E2_SIM85E2C || V850E2_SIM85E2S
+ depends on V850E2_SIM85E2C || V850E2_SIM85E2S
default y
@@ -132,7 +132,7 @@ menu "Processor type and features"
# V850E2 processors
config V850E2
bool
- depends V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
+ depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
default y
@@ -141,7 +141,7 @@ menu "Processor type and features"
# Boards in the RTE-x-CB series
config RTE_CB
bool
- depends RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
+ depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
default y
config RTE_CB_MULTI
@@ -149,28 +149,28 @@ menu "Processor type and features"
# RTE_CB_NB85E can either have multi ROM support or not, but
# other platforms (currently only RTE_CB_MA1) require it.
prompt "Multi monitor ROM support" if RTE_CB_NB85E
- depends RTE_CB_MA1 || RTE_CB_NB85E
+ depends on RTE_CB_MA1 || RTE_CB_NB85E
default y
config RTE_CB_MULTI_DBTRAP
bool "Pass illegal insn trap / dbtrap to kernel"
- depends RTE_CB_MULTI
+ depends on RTE_CB_MULTI
default n
config RTE_CB_MA1_KSRAM
bool "Kernel in SRAM (limits size of kernel)"
- depends RTE_CB_MA1 && RTE_CB_MULTI
+ depends on RTE_CB_MA1 && RTE_CB_MULTI
default n
config RTE_MB_A_PCI
bool "Mother-A PCI support"
- depends RTE_CB
+ depends on RTE_CB
default y
# The GBUS is used to talk to the RTE-MOTHER-A board
config RTE_GBUS_INT
bool
- depends RTE_MB_A_PCI
+ depends on RTE_MB_A_PCI
default y
# The only PCI bus we support is on the RTE-MOTHER-A board
@@ -209,7 +209,7 @@ menu "Processor type and features"
config ROM_KERNEL
bool "Kernel in ROM"
- depends V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
+ depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
# Some platforms pre-zero memory, in which case the kernel doesn't need to
config ZERO_BSS
@@ -225,10 +225,10 @@ menu "Processor type and features"
config V850E_HIGHRES_TIMER
bool "High resolution timer support"
- depends V850E_TIMER_D
+ depends on V850E_TIMER_D
config TIME_BOOTUP
bool "Time bootup"
- depends V850E_HIGHRES_TIMER
+ depends on V850E_HIGHRES_TIMER
config RESET_GUARD
bool "Reset Guard"
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index b10f4d8..0a3aee2 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -867,7 +867,7 @@ config SONYPI
config TANBAC_TB0219
tristate "TANBAC TB0219 base board support"
- depends TANBAC_TB022X
+ depends on TANBAC_TB022X
select GPIO_VR41XX
source "drivers/char/agp/Kconfig"
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index e23bc0d..3f82805 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -796,7 +796,7 @@ endchoice
config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
int "Maximum transfer size (KB) per request (up to 128)"
default "128"
- depends BLK_DEV_IDE_AU1XXX
+ depends on BLK_DEV_IDE_AU1XXX
config IDE_ARM
def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 176142c..7399ba7 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -12,7 +12,7 @@ config NEW_LEDS
config LEDS_CLASS
tristate "LED Class Support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
@@ -21,28 +21,28 @@ comment "LED drivers"
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
- depends LEDS_CLASS && PXA_SHARP_C7xx
+ depends on LEDS_CLASS && PXA_SHARP_C7xx
help
This option enables support for the LEDs on Sharp Zaurus
SL-C7x0 series (C700, C750, C760, C860).
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
- depends LEDS_CLASS && SHARP_LOCOMO
+ depends on LEDS_CLASS && SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
config LEDS_SPITZ
tristate "LED Support for the Sharp SL-Cxx00 series"
- depends LEDS_CLASS && PXA_SHARP_Cxx00
+ depends on LEDS_CLASS && PXA_SHARP_Cxx00
help
This option enables support for the LEDs on Sharp Zaurus
SL-Cxx00 series (C1000, C3000, C3100).
config LEDS_IXP4XX
tristate "LED Support for GPIO connected LEDs on IXP4XX processors"
- depends LEDS_CLASS && ARCH_IXP4XX
+ depends on LEDS_CLASS && ARCH_IXP4XX
help
This option enables support for the LEDs connected to GPIO
outputs of the Intel IXP4XX processors. To be useful the
@@ -51,7 +51,7 @@ config LEDS_IXP4XX
config LEDS_TOSA
tristate "LED Support for the Sharp SL-6000 series"
- depends LEDS_CLASS && PXA_SHARPSL
+ depends on LEDS_CLASS && PXA_SHARPSL
help
This option enables support for the LEDs on Sharp Zaurus
SL-6000 series.
@@ -65,7 +65,7 @@ config LEDS_S3C24XX
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
- depends LEDS_CLASS && MACH_AMS_DELTA
+ depends on LEDS_CLASS && MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
@@ -86,7 +86,7 @@ comment "LED Triggers"
config LEDS_TRIGGERS
bool "LED Trigger support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables trigger support for the leds class.
These triggers allow kernel events to drive the LEDs and can
@@ -94,21 +94,21 @@ config LEDS_TRIGGERS
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. If unsure, say Y.
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
- depends LEDS_TRIGGERS && BLK_DEV_IDEDISK
+ depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c
index 89dd18c..5ed0adc 100644
--- a/drivers/media/video/ov7670.c
+++ b/drivers/media/video/ov7670.c
@@ -18,7 +18,7 @@
#include <linux/i2c.h>
-MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net.");
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors");
MODULE_LICENSE("GPL");
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 03bf164..c2ae2a2 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1930,9 +1930,8 @@ static int e100_rx_alloc_list(struct nic *nic)
nic->rx_to_use = nic->rx_to_clean = NULL;
nic->ru_running = RU_UNINITIALIZED;
- if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC)))
+ if(!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
return -ENOMEM;
- memset(nic->rxs, 0, sizeof(struct rx) * count);
for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0b36dd5..2978c09 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -663,7 +663,7 @@ config V850E_UART
config V850E_UARTB
bool
- depends V850E_UART && V850E_ME2
+ depends on V850E_UART && V850E_ME2
default y
config V850E_UART_CONSOLE
@@ -909,7 +909,7 @@ config SERIAL_M32R_PLDSIO
config SERIAL_TXX9
bool "TMPTX39XX/49XX SIO support"
- depends HAS_TXX9_SERIAL
+ depends on HAS_TXX9_SERIAL
select SERIAL_CORE
default y
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 7d62300..71e6a24 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -1510,7 +1510,7 @@ static int __devinit icom_probe(struct pci_dev *dev,
}
if ( (retval = pci_request_regions(dev, "icom"))) {
- dev_err(&dev->dev, "pci_request_region FAILED\n");
+ dev_err(&dev->dev, "pci_request_regions FAILED\n");
pci_disable_device(dev);
return retval;
}
diff --git a/fs/Kconfig b/fs/Kconfig
index b3b5aa0..276ff3b 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -12,9 +12,7 @@ config EXT2_FS
Ext2 is a standard Linux file system for hard disks.
To compile this file system support as a module, choose M here: the
- module will be called ext2. Be aware however that the file system
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this could be dangerous.
+ module will be called ext2.
If unsure, say Y.
@@ -98,9 +96,7 @@ config EXT3_FS
(available at <http://sourceforge.net/projects/e2fsprogs/>).
To compile this file system support as a module, choose M here: the
- module will be called ext3. Be aware however that the file system
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this may be dangerous.
+ module will be called ext3.
config EXT3_FS_XATTR
bool "Ext3 extended attributes"
@@ -163,9 +159,7 @@ config EXT4DEV_FS
features will be added to ext4dev gradually.
To compile this file system support as a module, choose M here. The
- module will be called ext4dev. Be aware, however, that the filesystem
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this could be dangerous.
+ module will be called ext4dev.
If unsure, say N.
@@ -1008,7 +1002,7 @@ config TMPFS_POSIX_ACL
config HUGETLBFS
bool "HugeTLB file system support"
- depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
+ depends on X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
help
hugetlbfs is a filesystem backing for HugeTLB pages, based on
ramfs. For architectures that support it, say Y here and read
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 76f06f6..6e6d456 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -706,12 +706,11 @@ static int elf_fdpic_map_file(struct elf_fdpic_params *params,
return -ELIBBAD;
size = sizeof(*loadmap) + nloads * sizeof(*seg);
- loadmap = kmalloc(size, GFP_KERNEL);
+ loadmap = kzalloc(size, GFP_KERNEL);
if (!loadmap)
return -ENOMEM;
params->loadmap = loadmap;
- memset(loadmap, 0, size);
loadmap->version = ELF32_FDPIC_LOADMAP_VERSION;
loadmap->nsegs = nloads;
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 538423d..aca6698 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -40,7 +40,7 @@ extern void __chk_io_ptr(void __iomem *);
#error no compiler-gcc.h file for this gcc version
#elif __GNUC__ == 4
# include <linux/compiler-gcc4.h>
-#elif __GNUC__ == 3
+#elif __GNUC__ == 3 && __GNUC_MINOR__ >= 2
# include <linux/compiler-gcc3.h>
#else
# error Sorry, your compiler is too old/not recognized.
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
index a7f0150..fef6f3d 100644
--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -160,31 +160,6 @@ struct configfs_group_operations {
void (*drop_item)(struct config_group *group, struct config_item *item);
};
-
-
-/**
- * Use these macros to make defining attributes easier. See include/linux/device.h
- * for examples..
- */
-
-#if 0
-#define __ATTR(_name,_mode,_show,_store) { \
- .attr = {.ca_name = __stringify(_name), .ca_mode = _mode, .ca_owner = THIS_MODULE }, \
- .show = _show, \
- .store = _store, \
-}
-
-#define __ATTR_RO(_name) { \
- .attr = { .ca_name = __stringify(_name), .ca_mode = 0444, .ca_owner = THIS_MODULE }, \
- .show = _name##_show, \
-}
-
-#define __ATTR_NULL { .attr = { .name = NULL } }
-
-#define attr_name(_attr) (_attr).attr.name
-#endif
-
-
struct configfs_subsystem {
struct config_group su_group;
struct semaphore su_sem;
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 6d8846e..81480e6 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -11,7 +11,7 @@
** the sysctl() binary interface. Do *NOT* change the
** numbering of any existing values here, and do not change
** any numbers within any one set of values. If you have to
- ** have to redefine an existing interface, use a new number for it.
+ ** redefine an existing interface, use a new number for it.
** The kernel will then return -ENOTDIR to any application using
** the old binary interface.
**
diff --git a/init/Kconfig b/init/Kconfig
index 9edf103..f000edb 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -348,7 +348,7 @@ config SYSCTL_SYSCALL
If unsure say Y here.
config KALLSYMS
- bool "Load all symbols for debugging/kksymoops" if EMBEDDED
+ bool "Load all symbols for debugging/ksymoops" if EMBEDDED
default y
help
Say Y here to let the kernel print out symbolic crash information and
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 0701ddd..818e458 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -437,7 +437,7 @@ config FAIL_PAGE_ALLOC
Provide fault-injection capability for alloc_pages().
config FAIL_MAKE_REQUEST
- bool "Fault-injection capabilitiy for disk IO"
+ bool "Fault-injection capability for disk IO"
depends on FAULT_INJECTION
help
Provide fault-injection capability for disk IO.
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 74046ef..8ce00d3 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -565,7 +565,7 @@ static void ip_frag_queue(struct ipq *qp, struct sk_buff *skb)
} else {
struct sk_buff *free_it = next;
- /* Old fragmnet is completely overridden with
+ /* Old fragment is completely overridden with
* new one drop it.
*/
next = next->next;
diff --git a/sound/aoa/fabrics/Kconfig b/sound/aoa/fabrics/Kconfig
index c3bc770..50d7021 100644
--- a/sound/aoa/fabrics/Kconfig
+++ b/sound/aoa/fabrics/Kconfig
@@ -1,6 +1,6 @@
config SND_AOA_FABRIC_LAYOUT
tristate "layout-id fabric"
- depends SND_AOA
+ depends on SND_AOA
select SND_AOA_SOUNDBUS
select SND_AOA_SOUNDBUS_I2S
---help---
^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: please pull from the trivial tree
2006-12-01 12:55 ` Adrian Bunk
@ 2006-12-01 13:08 ` Tim Schmielau
0 siblings, 0 replies; 22+ messages in thread
From: Tim Schmielau @ 2006-12-01 13:08 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Linus Torvalds, linux-kernel
On Fri, 1 Dec 2006, Adrian Bunk wrote:
> On Fri, Dec 01, 2006 at 01:41:18PM +0100, Tim Schmielau wrote:
[...]
> > would leave a comment that is correct, but less useful (I'd expect any
> > kernel hacker to know that u64 is non-atomic on many platforms).
>
>
> If kernel hackers are expected to already know it's non-atomic we could
> remove the whole comment.
>
> The comment regarding "volatile" was bogus since "volatile" wouldn't
> help against getting garbage when reading an u64 variable.
Well, it's probably too trivial to argue about anyways - I don't mind much
in either direction.
Tim
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: please pull from the trivial tree
2006-12-01 12:41 ` Tim Schmielau
@ 2006-12-01 12:55 ` Adrian Bunk
2006-12-01 13:08 ` Tim Schmielau
0 siblings, 1 reply; 22+ messages in thread
From: Adrian Bunk @ 2006-12-01 12:55 UTC (permalink / raw)
To: Tim Schmielau; +Cc: Linus Torvalds, linux-kernel
On Fri, Dec 01, 2006 at 01:41:18PM +0100, Tim Schmielau wrote:
> > Chase Venters (1):
> > Fix jiffies.h comment
>
> This one actually obscures the comment rather than fixing it.
>
> >From jiffies.h:
> > 76 /*
> > 77 * The 64-bit value is not volatile - you MUST NOT read it
> > 78 * without sampling the sequence number in xtime_lock.
> > 79 * get_jiffies_64() will do this for you as appropriate.
> > 80 */
> > 81 extern u64 __jiffy_data jiffies_64;
> > 82 extern unsigned long volatile __jiffy_data jiffies;
>
> Note that jiffies is volatile, while jiffies_64 is not; the comment
> currently explains that. The proposed patch
>
> > Fix jiffies.h comment
> > jiffies.h includes a comment informing that jiffies_64 must be read with the
> > assistance of the xtime_lock seqlock. The comment text, however, calls
> > jiffies_64 "not volatile", which should probably read "not atomic".
> >
> > --- a/include/linux/jiffies.h
> > +++ b/include/linux/jiffies.h
> > @@ -74,7 +74,7 @@
> > #define __jiffy_data __attribute__((section(".data")))
> > /*
> > - * The 64-bit value is not volatile - you MUST NOT read it
> > + * The 64-bit value is not atomic - you MUST NOT read it
> > * without sampling the sequence number in xtime_lock.
> > * get_jiffies_64() will do this for you as appropriate.
> > */
>
> would leave a comment that is correct, but less useful (I'd expect any
> kernel hacker to know that u64 is non-atomic on many platforms).
If kernel hackers are expected to already know it's non-atomic we could
remove the whole comment.
The comment regarding "volatile" was bogus since "volatile" wouldn't
help against getting garbage when reading an u64 variable.
> Tim
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: please pull from the trivial tree
2006-12-01 11:37 Adrian Bunk
@ 2006-12-01 12:41 ` Tim Schmielau
2006-12-01 12:55 ` Adrian Bunk
0 siblings, 1 reply; 22+ messages in thread
From: Tim Schmielau @ 2006-12-01 12:41 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Linus Torvalds, linux-kernel
> Chase Venters (1):
> Fix jiffies.h comment
This one actually obscures the comment rather than fixing it.
>From jiffies.h:
> 76 /*
> 77 * The 64-bit value is not volatile - you MUST NOT read it
> 78 * without sampling the sequence number in xtime_lock.
> 79 * get_jiffies_64() will do this for you as appropriate.
> 80 */
> 81 extern u64 __jiffy_data jiffies_64;
> 82 extern unsigned long volatile __jiffy_data jiffies;
Note that jiffies is volatile, while jiffies_64 is not; the comment
currently explains that. The proposed patch
> Fix jiffies.h comment
> jiffies.h includes a comment informing that jiffies_64 must be read with the
> assistance of the xtime_lock seqlock. The comment text, however, calls
> jiffies_64 "not volatile", which should probably read "not atomic".
>
> --- a/include/linux/jiffies.h
> +++ b/include/linux/jiffies.h
> @@ -74,7 +74,7 @@
> #define __jiffy_data __attribute__((section(".data")))
> /*
> - * The 64-bit value is not volatile - you MUST NOT read it
> + * The 64-bit value is not atomic - you MUST NOT read it
> * without sampling the sequence number in xtime_lock.
> * get_jiffies_64() will do this for you as appropriate.
> */
would leave a comment that is correct, but less useful (I'd expect any
kernel hacker to know that u64 is non-atomic on many platforms).
Tim
^ permalink raw reply [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-12-01 11:37 Adrian Bunk
2006-12-01 12:41 ` Tim Schmielau
0 siblings, 1 reply; 22+ messages in thread
From: Adrian Bunk @ 2006-12-01 11:37 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Alexey Dobriyan (1):
mqueue.h: don't include linux/types.h
Chase Venters (1):
Fix jiffies.h comment
Eric Sesterhenn (3):
BUG_ON conversion for drivers/media/video/pwc/pwc-if.c
BUG_ON conversion for drivers/mmc/omap.c
BUG_ON conversion for fs/aio.c
Jan Engelhardt (2):
Fix typos in doc and comments
Fix typos in drivers/isdn/hisax/isdnl2.c
Jim Cromie (2):
fix spelling error in include/linux/kernel.h
tabify MAINTAINERS
Matt LaPlante (5):
Fix typos in /Documentation : 'T''
Fix typos in /Documentation : 'U-Z'
Fix typos in /Documentation : Misc
Fix misc Kconfig typos
Fix misc .c/.h comment typos
Documentation/Changes | 2
Documentation/DMA-API.txt | 2
Documentation/DMA-ISA-LPC.txt | 2
Documentation/MSI-HOWTO.txt | 2
Documentation/accounting/taskstats.txt | 10 -
Documentation/block/biodoc.txt | 10 -
Documentation/cpu-freq/cpufreq-nforce2.txt | 4
Documentation/cpu-hotplug.txt | 4
Documentation/devices.txt | 8
Documentation/driver-model/porting.txt | 2
Documentation/dvb/ci.txt | 4
Documentation/eisa.txt | 2
Documentation/filesystems/adfs.txt | 2
Documentation/filesystems/configfs/configfs.txt | 4
Documentation/filesystems/fuse.txt | 4
Documentation/filesystems/hpfs.txt | 2
Documentation/filesystems/ntfs.txt | 4
Documentation/filesystems/ocfs2.txt | 2
Documentation/filesystems/proc.txt | 10 -
Documentation/filesystems/spufs.txt | 2
Documentation/fujitsu/frv/gdbstub.txt | 2
Documentation/fujitsu/frv/kernel-ABI.txt | 2
Documentation/ide.txt | 2
Documentation/input/amijoy.txt | 4
Documentation/input/atarikbd.txt | 12 -
Documentation/input/yealink.txt | 2
Documentation/ioctl/cdrom.txt | 2
Documentation/kbuild/makefiles.txt | 10 -
Documentation/keys.txt | 2
Documentation/laptop-mode.txt | 8
Documentation/memory-barriers.txt | 2
Documentation/networking/NAPI_HOWTO.txt | 26 +-
Documentation/networking/cs89x0.txt | 6
Documentation/networking/iphase.txt | 2
Documentation/networking/packet_mmap.txt | 2
Documentation/networking/pktgen.txt | 6
Documentation/networking/proc_net_tcp.txt | 2
Documentation/networking/sk98lin.txt | 2
Documentation/networking/slicecom.txt | 2
Documentation/networking/wan-router.txt | 8
Documentation/pnp.txt | 2
Documentation/power/pci.txt | 4
Documentation/power/states.txt | 2
Documentation/power/swsusp.txt | 2
Documentation/powerpc/booting-without-of.txt | 8
Documentation/robust-futex-ABI.txt | 2
Documentation/robust-futexes.txt | 2
Documentation/s390/crypto/crypto-API.txt | 4
Documentation/scsi/aic79xx.txt | 4
Documentation/scsi/aic7xxx_old.txt | 4
Documentation/scsi/ibmmca.txt | 14 -
Documentation/scsi/in2000.txt | 2
Documentation/scsi/libsas.txt | 2
Documentation/scsi/ncr53c8xx.txt | 2
Documentation/scsi/scsi-changer.txt | 4
Documentation/scsi/scsi_eh.txt | 2
Documentation/scsi/st.txt | 2
Documentation/scsi/sym53c8xx_2.txt | 2
Documentation/sharedsubtree.txt | 4
Documentation/sound/alsa/ALSA-Configuration.txt | 2
Documentation/sound/alsa/Audigy-mixer.txt | 2
Documentation/sound/alsa/SB-Live-mixer.txt | 2
Documentation/stable_kernel_rules.txt | 2
Documentation/sysctl/fs.txt | 2
Documentation/sysctl/vm.txt | 2
Documentation/uml/UserModeLinux-HOWTO.txt | 2
Documentation/usb/hiddev.txt | 2
Documentation/usb/rio.txt | 4
Documentation/usb/usb-serial.txt | 8
Documentation/watchdog/watchdog-api.txt | 2
MAINTAINERS | 144 ++++++++--------
arch/arm/mach-ixp4xx/Kconfig | 2
arch/arm/mach-lh7a40x/Kconfig | 2
arch/arm/mach-s3c2410/Kconfig | 2
arch/arm/mm/Kconfig | 2
arch/cris/arch-v10/Kconfig | 2
arch/cris/arch-v10/drivers/Kconfig | 2
arch/cris/arch-v10/drivers/eeprom.c | 6
arch/cris/arch-v10/drivers/i2c.c | 2
arch/cris/arch-v10/kernel/kgdb.c | 2
arch/cris/arch-v32/drivers/Kconfig | 8
arch/ia64/hp/common/sba_iommu.c | 8
arch/m68knommu/Kconfig | 4
arch/mips/Kconfig | 4
arch/powerpc/Kconfig | 2
arch/powerpc/platforms/83xx/Kconfig | 4
arch/ppc/Kconfig | 2
arch/sh/Kconfig | 2
arch/sh64/lib/dbg.c | 2
arch/sparc/Kconfig | 4
arch/um/drivers/chan_user.c | 2
drivers/atm/iphase.c | 2
drivers/char/Kconfig | 2
drivers/char/rio/riocmd.c | 2
drivers/char/rio/rioinit.c | 2
drivers/char/rio/rioparam.c | 6
drivers/ide/ide-floppy.c | 2
drivers/isdn/hardware/eicon/os_4bri.c | 2
drivers/isdn/hisax/hfc4s8s_l1.h | 2
drivers/isdn/hisax/isdnl2.c | 20 +-
drivers/media/dvb/ttpci/budget-patch.c | 8
drivers/media/video/Kconfig | 2
drivers/media/video/pwc/pwc-if.c | 3
drivers/message/fusion/mptbase.c | 2
drivers/mmc/omap.c | 3
drivers/mtd/maps/Kconfig | 2
drivers/mtd/maps/cfi_flagadm.c | 2
drivers/net/Kconfig | 4
drivers/net/e100.c | 2
drivers/net/e1000/e1000_hw.c | 2
drivers/net/phy/Kconfig | 4
drivers/net/sk98lin/h/skdrv2nd.h | 2
drivers/net/sk98lin/skdim.c | 4
drivers/net/wireless/ipw2200.c | 4
drivers/parisc/ccio-dma.c | 2
drivers/parisc/iosapic.c | 6
drivers/pci/Kconfig | 4
drivers/pci/hotplug/ibmphp_hpc.c | 2
drivers/s390/net/claw.h | 2
drivers/scsi/aic94xx/aic94xx_reg_def.h | 2
drivers/scsi/aic94xx/aic94xx_sds.c | 4
drivers/scsi/ncr53c8xx.c | 14 -
drivers/scsi/ncr53c8xx.h | 6
drivers/spi/Kconfig | 2
drivers/usb/host/Kconfig | 2
drivers/usb/host/u132-hcd.c | 6
drivers/usb/misc/usb_u132.h | 2
drivers/usb/serial/digi_acceleport.c | 2
fs/Kconfig | 4
fs/aio.c | 6
fs/jfs/jfs_filsys.h | 2
fs/reiserfs/journal.c | 6
include/asm-m68knommu/mcfmbus.h | 2
include/asm-parisc/dma.h | 6
include/asm-parisc/pci.h | 2
include/asm-parisc/ropes.h | 2
include/linux/ixjuser.h | 2
include/linux/jiffies.h | 2
include/linux/kernel.h | 2
include/linux/mqueue.h | 2
include/linux/reiserfs_fs_sb.h | 2
include/linux/textsearch.h | 4
lib/textsearch.c | 2
net/wanrouter/af_wanpipe.c | 4
net/wanrouter/wanmain.c | 2
sound/Kconfig | 4
sound/oss/cs46xx.c | 6
147 files changed, 344 insertions(+), 350 deletions(-)
^ permalink raw reply [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-10-03 23:05 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-10-03 23:05 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Adrian Bunk:
input: remove obsolete contact information
remove mentionings of devfs in documentation
Christian Borntraeger:
Fix bytes <-> kilobytes typo in Kconfig for ramdisk
Eric Sesterhenn:
BUG_ON cleanup for drivers/md/
BUG_ON cleanup in drivers/net/tokenring/
BUG_ON cleanups in arch/i386
BUG_ON conversion for fs/reiserfs
BUG_ON() conversion in fs/nfsd/
BUG_ON conversion for fs/xfs/
Henrik Kretzschmar:
kerneldoc-typo in led-class.c
Jim Cromie:
ite_gpio fix tabbage
Josh Triplett:
rcutorture: Fix incorrect description of default for nreaders parameter
Komal Shah:
debugfs: spelling fix
Matt LaPlante:
Attack of "the the"s in arch
Typos in fs/Kconfig
fix an arch/alpha/Kconfig typo
fix drivers/acpi/Kconfig typos
Fix several typos in drivers/
more misc typo fixes
Still more typo fixes
Fix some typos in Documentation/: 'A'
Fix typos in Documentation/: 'B'-'C'
Fix typos in Documentation/: 'D'-'E'
Fix typos in Documentation/: 'F'-'G'
Fix typos in Documentation/: 'H'-'M'
Fix typos in Documentation/: 'N'-'P'
Fix "can not" in Documentation and Kconfig
Fix typos in Documentation/: 'Q'-'R'
Fix typos in Documentation/: 'S'
Matthew Martin:
parport: Remove space in function calls
Michael Opdenacker:
reboot parameter in Documentation/kernel-parameters.txt
Spelling fix: "control" instead of "cotrol"
Michal Wronski:
Michal Wronski: update contact info
Paolo Ornati:
Documentation: remove duplicated words
Riccardo Magliocchetti:
fix a typo in Documentation/pi-futex.txt
Rolf Eike Beer:
remove duplicate "until" from kernel/workqueue.c
Fix copy&waste bug in comment in scripts/kernel-doc
Samuel Tardieu:
Add missing maintainer countries in CREDITS
Uwe Zeisberger:
fix file specification in comments
CREDITS | 8
Documentation/DMA-mapping.txt | 4
Documentation/DocBook/libata.tmpl | 2
Documentation/DocBook/usb.tmpl | 5
Documentation/DocBook/writing_usb_driver.tmpl | 7
Documentation/IPMI.txt | 4
Documentation/MSI-HOWTO.txt | 2
Documentation/RCU/whatisRCU.txt | 4
Documentation/aoe/todo.txt | 2
Documentation/arm/SA1100/serial_UART | 4
Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt | 2
Documentation/arm/Samsung-S3C24XX/GPIO.txt | 2
Documentation/arm/Samsung-S3C24XX/Overview.txt | 2
Documentation/arm/Samsung-S3C24XX/S3C2412.txt | 2
Documentation/block/as-iosched.txt | 4
Documentation/block/barrier.txt | 6
Documentation/block/biodoc.txt | 10
Documentation/block/deadline-iosched.txt | 4
Documentation/cciss.txt | 4
Documentation/computone.txt | 70 ---
Documentation/cpu-freq/cpufreq-stats.txt | 10
Documentation/cpu-freq/governors.txt | 12
Documentation/cputopology.txt | 2
Documentation/dell_rbu.txt | 22 -
Documentation/devices.txt | 8
Documentation/driver-model/class.txt | 2
Documentation/driver-model/driver.txt | 2
Documentation/driver-model/overview.txt | 2
Documentation/dvb/avermedia.txt | 4
Documentation/dvb/cards.txt | 2
Documentation/dvb/ci.txt | 4
Documentation/dvb/faq.txt | 6
Documentation/eisa.txt | 4
Documentation/exception.txt | 2
Documentation/fb/fbcon.txt | 2
Documentation/fb/sisfb.txt | 2
Documentation/fb/sstfb.txt | 42 -
Documentation/feature-removal-schedule.txt | 2
Documentation/filesystems/00-INDEX | 2
Documentation/filesystems/befs.txt | 8
Documentation/filesystems/configfs/configfs.txt | 8
Documentation/filesystems/directory-locking | 2
Documentation/filesystems/dlmfs.txt | 2
Documentation/filesystems/ext2.txt | 2
Documentation/filesystems/files.txt | 2
Documentation/filesystems/ntfs.txt | 10
Documentation/filesystems/proc.txt | 10
Documentation/filesystems/spufs.txt | 6
Documentation/filesystems/sysfs.txt | 2
Documentation/filesystems/tmpfs.txt | 4
Documentation/filesystems/vfat.txt | 2
Documentation/filesystems/vfs.txt | 2
Documentation/fujitsu/frv/mmu-layout.txt | 2
Documentation/highuid.txt | 2
Documentation/hrtimers.txt | 12
Documentation/ia64/efirtc.txt | 2
Documentation/ia64/fsys.txt | 2
Documentation/ia64/mca.txt | 4
Documentation/ibm-acpi.txt | 2
Documentation/ide.txt | 2
Documentation/input/amijoy.txt | 4
Documentation/input/atarikbd.txt | 10
Documentation/input/cs461x.txt | 2
Documentation/input/ff.txt | 2
Documentation/input/gameport-programming.txt | 4
Documentation/input/input.txt | 31 -
Documentation/input/joystick-parport.txt | 8
Documentation/input/joystick.txt | 2
Documentation/input/yealink.txt | 4
Documentation/ioctl/hdio.txt | 2
Documentation/isdn/INTERFACE.fax | 2
Documentation/isdn/README.hysdn | 2
Documentation/java.txt | 2
Documentation/kbuild/kconfig-language.txt | 4
Documentation/kdump/kdump.txt | 2
Documentation/kernel-docs.txt | 11
Documentation/kernel-parameters.txt | 10
Documentation/keys.txt | 6
Documentation/kobject.txt | 2
Documentation/laptop-mode.txt | 2
Documentation/lockdep-design.txt | 8
Documentation/m68k/kernel-options.txt | 2
Documentation/mca.txt | 2
Documentation/md.txt | 16
Documentation/memory-barriers.txt | 4
Documentation/mono.txt | 2
Documentation/networking/3c509.txt | 2
Documentation/networking/NAPI_HOWTO.txt | 2
Documentation/networking/arcnet-hardware.txt | 2
Documentation/networking/bonding.txt | 2
Documentation/networking/cs89x0.txt | 6
Documentation/networking/cxgb.txt | 4
Documentation/networking/decnet.txt | 2
Documentation/networking/dl2k.txt | 4
Documentation/networking/dmfe.txt | 2
Documentation/networking/driver.txt | 2
Documentation/networking/e1000.txt | 2
Documentation/networking/fib_trie.txt | 2
Documentation/networking/gen_stats.txt | 8
Documentation/networking/ip-sysctl.txt | 4
Documentation/networking/netconsole.txt | 2
Documentation/networking/netif-msg.txt | 2
Documentation/networking/operstates.txt | 2
Documentation/networking/packet_mmap.txt | 24 -
Documentation/networking/pktgen.txt | 8
Documentation/networking/s2io.txt | 2
Documentation/networking/sk98lin.txt | 16
Documentation/networking/skfp.txt | 4
Documentation/networking/slicecom.txt | 8
Documentation/networking/smctr.txt | 2
Documentation/networking/tcp.txt | 2
Documentation/networking/tms380tr.txt | 2
Documentation/networking/vortex.txt | 4
Documentation/networking/wan-router.txt | 16
Documentation/nfsroot.txt | 2
Documentation/pci-error-recovery.txt | 2
Documentation/pi-futex.txt | 2
Documentation/pm.txt | 6
Documentation/pnp.txt | 2
Documentation/power/pci.txt | 2
Documentation/power/swsusp.txt | 8
Documentation/power/tricks.txt | 2
Documentation/power/userland-swsusp.txt | 2
Documentation/power/video.txt | 2
Documentation/powerpc/booting-without-of.txt | 43 --
Documentation/powerpc/eeh-pci-error-recovery.txt | 4
Documentation/powerpc/hvcs.txt | 2
Documentation/prio_tree.txt | 2
Documentation/rocket.txt | 6
Documentation/rpc-cache.txt | 4
Documentation/s390/3270.txt | 4
Documentation/s390/Debugging390.txt | 93 ++--
Documentation/s390/cds.txt | 14
Documentation/s390/crypto/crypto-API.txt | 4
Documentation/s390/driver-model.txt | 4
Documentation/s390/monreader.txt | 2
Documentation/s390/s390dbf.txt | 12
Documentation/sched-coding.txt | 2
Documentation/sched-design.txt | 4
Documentation/scsi/ChangeLog.1992-1997 | 2
Documentation/scsi/NinjaSCSI.txt | 18
Documentation/scsi/aacraid.txt | 2
Documentation/scsi/aic79xx.txt | 4
Documentation/scsi/aic7xxx.txt | 2
Documentation/scsi/aic7xxx_old.txt | 6
Documentation/scsi/dc395x.txt | 2
Documentation/scsi/dpti.txt | 2
Documentation/scsi/ibmmca.txt | 36 -
Documentation/scsi/megaraid.txt | 4
Documentation/scsi/ncr53c8xx.txt | 20
Documentation/scsi/osst.txt | 3
Documentation/scsi/ppa.txt | 2
Documentation/scsi/scsi-changer.txt | 2
Documentation/scsi/scsi_eh.txt | 4
Documentation/scsi/st.txt | 4
Documentation/scsi/sym53c8xx_2.txt | 4
Documentation/scsi/tmscsim.txt | 4
Documentation/sh/kgdb.txt | 2
Documentation/sound/alsa/ALSA-Configuration.txt | 26 -
Documentation/sound/alsa/Audiophile-Usb.txt | 2
Documentation/sound/alsa/CMIPCI.txt | 6
Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 2
Documentation/sound/alsa/MIXART.txt | 6
Documentation/sound/alsa/Procfile.txt | 10
Documentation/sound/oss/AWE32 | 2
Documentation/sound/oss/solo1 | 2
Documentation/sound/oss/ultrasound | 2
Documentation/sound/oss/vwsnd | 2
Documentation/sparc/sbus_drivers.txt | 6
Documentation/spi/pxa2xx | 6
Documentation/spi/spi-summary | 4
Documentation/stable_kernel_rules.txt | 4
Documentation/uml/UserModeLinux-HOWTO.txt | 66 ---
Documentation/unshare.txt | 2
Documentation/usb/URB.txt | 2
Documentation/usb/acm.txt | 14
Documentation/usb/error-codes.txt | 4
Documentation/usb/hiddev.txt | 2
Documentation/usb/mtouchusb.txt | 6
Documentation/usb/usb-serial.txt | 11
Documentation/video4linux/README.pvrusb2 | 2
Documentation/video4linux/Zoran | 2
Documentation/video4linux/cx2341x/fw-decoder-api.txt | 2
Documentation/video4linux/cx2341x/fw-encoder-api.txt | 2
Documentation/video4linux/cx2341x/fw-osd-api.txt | 2
Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt | 2
Documentation/video4linux/et61x251.txt | 4
Documentation/video4linux/hauppauge-wintv-cx88-ir.txt | 2
Documentation/video4linux/meye.txt | 2
Documentation/video4linux/sn9c102.txt | 4
Documentation/video4linux/w9968cf.txt | 2
Documentation/video4linux/zr36120.txt | 4
Documentation/vm/numa | 2
Documentation/watchdog/watchdog-api.txt | 8
Documentation/x86_64/boot-options.txt | 2
arch/alpha/Kconfig | 2
arch/alpha/kernel/alpha_ksyms.c | 2
arch/alpha/kernel/head.S | 2
arch/alpha/kernel/machvec_impl.h | 2
arch/alpha/lib/dbg_stackcheck.S | 2
arch/alpha/lib/dbg_stackkill.S | 2
arch/alpha/lib/memset.S | 2
arch/arm/Kconfig | 2
arch/arm/boot/compressed/head-clps7500.S | 2
arch/arm/common/sa1111.c | 2
arch/arm/mach-imx/leds.c | 2
arch/arm/mach-imx/leds.h | 2
arch/arm/mach-ixp4xx/coyote-pci.c | 2
arch/arm/mach-ixp4xx/ixdpg425-pci.c | 2
arch/arm/mach-lh7a40x/arch-lpd7a40x.c | 2
arch/arm/mach-omap1/serial.c | 2
arch/arm/mach-omap2/board-apollon.c | 2
arch/arm/mach-omap2/board-generic.c | 2
arch/arm/mach-omap2/board-h4.c | 2
arch/arm/mach-omap2/irq.c | 2
arch/arm/mach-omap2/prcm-regs.h | 2
arch/arm/mach-omap2/serial.c | 2
arch/arm/mach-omap2/sram-fn.S | 2
arch/arm/mach-pxa/corgi_lcd.c | 2
arch/arm/mach-pxa/leds.h | 2
arch/arm/mach-s3c2410/Kconfig | 2
arch/arm/mach-s3c2410/s3c2400-gpio.c | 2
arch/arm/mach-s3c2410/s3c2410-clock.c | 2
arch/arm/mach-s3c2410/s3c2410-gpio.c | 2
arch/arm/mach-s3c2410/s3c2442.c | 2
arch/arm/mach-s3c2410/s3c244x-irq.c | 2
arch/arm/mach-s3c2410/s3c244x.h | 2
arch/arm/mach-s3c2410/usb-simtec.h | 2
arch/arm/mach-sa1100/dma.c | 2
arch/arm/mach-shark/leds.c | 2
arch/arm/plat-omap/sram-fn.S | 2
arch/cris/arch-v10/drivers/Kconfig | 4
arch/cris/arch-v32/Kconfig | 2
arch/h8300/kernel/ints.c | 2
arch/i386/Kconfig | 2
arch/i386/kernel/cpu/common.c | 3
arch/i386/kernel/efi.c | 3
arch/i386/kernel/ldt.c | 2
arch/i386/mach-visws/visws_apic.c | 2
arch/i386/mm/discontig.c | 3
arch/i386/mm/init.c | 3
arch/i386/pci/fixup.c | 2
arch/ia64/kernel/acpi-processor.c | 2
arch/ia64/kernel/entry.S | 2
arch/ia64/kernel/irq_ia64.c | 2
arch/ia64/sn/kernel/xpnet.c | 2
arch/m68k/mm/motorola.c | 2
arch/m68k/sun3/sun3dvma.c | 2
arch/m68knommu/Kconfig | 6
arch/m68knommu/platform/68328/head-pilot.S | 2
arch/mips/dec/boot/decstation.c | 2
arch/mips/dec/prom/call_o32.S | 2
arch/mips/mm/tlbex.c | 2
arch/mips/pci/fixup-vr4133.c | 2
arch/mips/tx4938/common/irq.c | 2
arch/parisc/kernel/entry.S | 4
arch/powerpc/Kconfig | 4
arch/powerpc/kernel/perfmon_fsl_booke.c | 2
arch/powerpc/oprofile/op_model_7450.c | 2
arch/powerpc/oprofile/op_model_fsl_booke.c | 2
arch/powerpc/platforms/83xx/mpc834x_sys.h | 2
arch/powerpc/platforms/85xx/mpc8540_ads.h | 2
arch/powerpc/platforms/85xx/mpc85xx.h | 2
arch/powerpc/platforms/85xx/mpc85xx_cds.h | 2
arch/powerpc/sysdev/ipic.c | 2
arch/ppc/Kconfig | 4
arch/ppc/boot/include/mpsc_defs.h | 2
arch/ppc/platforms/4xx/xparameters/xparameters.h | 2
arch/ppc/platforms/85xx/Kconfig | 14
arch/ppc/platforms/lopec.h | 2
arch/ppc/platforms/mpc8272ads_setup.c | 2
arch/ppc/platforms/mpc885ads_setup.c | 2
arch/ppc/platforms/mvme5100.h | 2
arch/ppc/platforms/powerpmc250.h | 2
arch/ppc/platforms/prpmc750.h | 2
arch/ppc/platforms/prpmc800.h | 2
arch/ppc/platforms/spruce.h | 2
arch/sh/boards/bigsur/io.c | 2
arch/sh/boards/bigsur/led.c | 2
arch/sh/boards/ec3104/io.c | 2
arch/sh/boards/hp6xx/setup.c | 2
arch/sh/boards/mpc1211/led.c | 2
arch/sh/boards/mpc1211/setup.c | 2
arch/sh/boards/renesas/hs7751rvoip/io.c | 2
arch/sh/boards/renesas/hs7751rvoip/pci.c | 2
arch/sh/boards/renesas/rts7751r2d/led.c | 2
arch/sh/boards/renesas/systemh/io.c | 2
arch/sh/boards/renesas/systemh/irq.c | 2
arch/sh/boards/renesas/systemh/setup.c | 2
arch/sh/boards/se/770x/led.c | 2
arch/sh/boards/se/7751/led.c | 2
arch/sh/boards/se/7751/pci.c | 2
arch/sh/boards/superh/microdev/io.c | 2
arch/sh/boards/superh/microdev/led.c | 2
arch/sh/drivers/dma/dma-pvr2.c | 2
arch/sh/drivers/pci/dma-dreamcast.c | 2
arch/sh/drivers/pci/fixups-dreamcast.c | 2
arch/sh/drivers/pci/ops-bigsur.c | 2
arch/sh/drivers/pci/ops-dreamcast.c | 2
arch/sh/drivers/pci/ops-rts7751r2d.c | 2
arch/sh/kernel/cpu/ubc.S | 2
arch/sh64/boot/compressed/misc.c | 2
arch/sh64/kernel/alphanum.c | 2
arch/sh64/lib/c-checksum.c | 2
arch/sh64/mach-cayman/led.c | 2
arch/sh64/oprofile/op_model_null.c | 2
arch/sparc/kernel/sys_solaris.c | 2
arch/um/Kconfig | 2
arch/um/Makefile | 2
arch/um/drivers/line.c | 2
arch/um/include/sysdep-x86_64/ptrace_user.h | 2
arch/v850/kernel/entry.S | 2
arch/x86_64/Kconfig | 2
arch/xtensa/Kconfig | 4
arch/xtensa/kernel/module.c | 2
arch/xtensa/kernel/pci-dma.c | 2
arch/xtensa/kernel/pci.c | 2
arch/xtensa/kernel/setup.c | 2
arch/xtensa/kernel/syscalls.c | 2
arch/xtensa/lib/pci-auto.c | 2
arch/xtensa/lib/usercopy.S | 4
arch/xtensa/mm/pgtable.c | 2
arch/xtensa/mm/tlb.c | 2
drivers/acorn/block/mfmhd.c | 2
drivers/acpi/Kconfig | 6
drivers/block/Kconfig | 5
drivers/cdrom/cdrom.c | 2
drivers/char/hw_random/ixp4xx-rng.c | 2
drivers/char/hw_random/omap-rng.c | 2
drivers/char/ite_gpio.c | 14
drivers/char/mwave/README | 5
drivers/char/watchdog/ixp2000_wdt.c | 2
drivers/char/watchdog/ixp4xx_wdt.c | 2
drivers/firmware/Kconfig | 2
drivers/firmware/edd.c | 2
drivers/i2c/busses/Kconfig | 4
drivers/i2c/busses/i2c-ibm_iic.c | 2
drivers/i2c/busses/i2c-ibm_iic.h | 2
drivers/i2c/busses/i2c-ixp4xx.c | 2
drivers/i2c/busses/scx200_i2c.c | 2
drivers/ide/h8300/ide-h8300.c | 2
drivers/ide/ppc/pmac.c | 2
drivers/ieee1394/Kconfig | 2
drivers/infiniband/ulp/ipoib/Kconfig | 2
drivers/input/joystick/Kconfig | 2
drivers/input/keyboard/Kconfig | 2
drivers/input/serio/Kconfig | 4
drivers/isdn/hardware/eicon/Kconfig | 2
drivers/isdn/hisax/Kconfig | 2
drivers/isdn/hisax/amd7930_fn.h | 2
drivers/leds/led-class.c | 2
drivers/leds/leds-locomo.c | 2
drivers/macintosh/Kconfig | 2
drivers/macintosh/adbhid.c | 2
drivers/md/md.c | 3
drivers/md/raid5.c | 2
drivers/media/dvb/cinergyT2/Kconfig | 2
drivers/media/radio/Kconfig | 3
drivers/media/video/Kconfig | 2
drivers/media/video/cx88/Kconfig | 2
drivers/media/video/pwc/philips.txt | 4
drivers/mtd/chips/Kconfig | 2
drivers/mtd/maps/bast-flash.c | 2
drivers/mtd/maps/dmv182.c | 2
drivers/mtd/nand/Kconfig | 2
drivers/mtd/onenand/Kconfig | 2
drivers/net/Kconfig | 2
drivers/net/arm/am79c961a.h | 2
drivers/net/ibm_emac/ibm_emac_debug.h | 2
drivers/net/ibm_emac/ibm_emac_rgmii.h | 2
drivers/net/tokenring/tmspci.c | 3
drivers/net/wireless/Kconfig | 2
drivers/parisc/power.c | 2
drivers/parport/daisy.c | 212 +++++-----
drivers/pci/hotplug/Kconfig | 2
drivers/rapidio/Kconfig | 2
drivers/rtc/rtc-max6902.c | 2
drivers/sbus/char/cpwatchdog.c | 2
drivers/scsi/Kconfig | 6
drivers/scsi/aic7xxx/Kconfig.aic79xx | 4
drivers/scsi/aic7xxx/Kconfig.aic7xxx | 4
drivers/scsi/arm/arxescsi.c | 2
drivers/serial/21285.c | 2
drivers/serial/Kconfig | 6
drivers/serial/cpm_uart/cpm_uart_cpm1.h | 2
drivers/serial/cpm_uart/cpm_uart_cpm2.h | 2
drivers/usb/atm/Kconfig | 2
drivers/usb/core/file.c | 2
drivers/usb/core/usb.c | 2
drivers/usb/gadget/Kconfig | 2
drivers/usb/storage/Kconfig | 2
drivers/video/Kconfig | 10
drivers/video/s3c2410fb.h | 2
drivers/w1/Kconfig | 2
fs/Kconfig | 18
fs/befs/befs_fs_types.h | 2
fs/cifs/README | 6
fs/debugfs/inode.c | 2
fs/hfsplus/part_tbl.c | 2
fs/jbd/commit.c | 2
fs/jbd/journal.c | 2
fs/nfsd/nfs2acl.c | 2
fs/nfsd/nfs4xdr.c | 3
fs/nfsd/nfsxdr.c | 2
fs/nls/nls_ascii.c | 2
fs/nls/nls_base.c | 2
fs/nls/nls_cp1250.c | 2
fs/nls/nls_cp1251.c | 2
fs/nls/nls_cp1255.c | 2
fs/nls/nls_cp437.c | 2
fs/nls/nls_cp737.c | 2
fs/nls/nls_cp775.c | 2
fs/nls/nls_cp850.c | 2
fs/nls/nls_cp852.c | 2
fs/nls/nls_cp855.c | 2
fs/nls/nls_cp857.c | 2
fs/nls/nls_cp860.c | 2
fs/nls/nls_cp861.c | 2
fs/nls/nls_cp862.c | 2
fs/nls/nls_cp863.c | 2
fs/nls/nls_cp864.c | 2
fs/nls/nls_cp865.c | 2
fs/nls/nls_cp866.c | 2
fs/nls/nls_cp869.c | 2
fs/nls/nls_cp874.c | 2
fs/nls/nls_cp932.c | 2
fs/nls/nls_cp936.c | 2
fs/nls/nls_cp949.c | 2
fs/nls/nls_cp950.c | 2
fs/nls/nls_euc-jp.c | 2
fs/nls/nls_iso8859-1.c | 2
fs/nls/nls_iso8859-13.c | 2
fs/nls/nls_iso8859-14.c | 2
fs/nls/nls_iso8859-15.c | 2
fs/nls/nls_iso8859-2.c | 2
fs/nls/nls_iso8859-3.c | 2
fs/nls/nls_iso8859-4.c | 2
fs/nls/nls_iso8859-5.c | 2
fs/nls/nls_iso8859-6.c | 2
fs/nls/nls_iso8859-7.c | 2
fs/nls/nls_iso8859-9.c | 2
fs/nls/nls_koi8-r.c | 2
fs/nls/nls_koi8-ru.c | 2
fs/nls/nls_koi8-u.c | 2
fs/reiserfs/file.c | 6
fs/reiserfs/item_ops.c | 12
fs/reiserfs/journal.c | 49 --
fs/reiserfs/namei.c | 9
fs/reiserfs/stree.c | 4
fs/xfs/support/debug.c | 6
include/asm-arm/arch-clps711x/entry-macro.S | 2
include/asm-arm/arch-ebsa285/entry-macro.S | 2
include/asm-arm/arch-h720x/system.h | 2
include/asm-arm/arch-ixp4xx/system.h | 2
include/asm-arm/arch-omap/dmtimer.h | 2
include/asm-arm/arch-omap/mcbsp.h | 2
include/asm-arm/arch-omap/pm.h | 2
include/asm-arm/arch-pnx4008/platform.h | 2
include/asm-arm/arch-s3c2410/fb.h | 2
include/asm-arm/arch-s3c2410/regs-adc.h | 2
include/asm-arm/arch-s3c2410/regs-clock.h | 2
include/asm-arm/arch-s3c2410/regs-dsc.h | 2
include/asm-arm/arch-s3c2410/regs-gpio.h | 2
include/asm-arm/arch-s3c2410/regs-gpioj.h | 2
include/asm-arm/arch-s3c2410/regs-iis.h | 2
include/asm-arm/arch-s3c2410/regs-irq.h | 2
include/asm-arm/arch-s3c2410/regs-lcd.h | 2
include/asm-arm/arch-s3c2410/regs-rtc.h | 2
include/asm-arm/arch-s3c2410/regs-sdi.h | 2
include/asm-arm/arch-s3c2410/regs-timer.h | 2
include/asm-arm/arch-s3c2410/regs-udc.h | 2
include/asm-arm/arch-s3c2410/spi-gpio.h | 2
include/asm-arm/arch-sa1100/neponset.h | 2
include/asm-arm/arch-sa1100/uncompress.h | 2
include/asm-arm/arch-shark/vmalloc.h | 2
include/asm-arm/hardware/debug-8250.S | 2
include/asm-arm/hardware/debug-pl01x.S | 2
include/asm-arm/hardware/entry-macro-iomd.S | 2
include/asm-arm/hardware/sa1111.h | 2
include/asm-arm26/assembler.h | 2
include/asm-arm26/namei.h | 2
include/asm-arm26/semaphore.h | 2
include/asm-frv/namei.h | 2
include/asm-generic/mutex-dec.h | 2
include/asm-generic/mutex-null.h | 2
include/asm-generic/mutex-xchg.h | 2
include/asm-generic/rtc.h | 2
include/asm-generic/tlb.h | 2
include/asm-m32r/m32104ut/m32104ut_pld.h | 2
include/asm-m32r/m32700ut/m32700ut_lan.h | 2
include/asm-m32r/m32700ut/m32700ut_lcd.h | 2
include/asm-m32r/m32700ut/m32700ut_pld.h | 2
include/asm-m32r/mappi2/mappi2_pld.h | 2
include/asm-m32r/mappi3/mappi3_pld.h | 2
include/asm-m32r/opsput/opsput_lan.h | 2
include/asm-m32r/opsput/opsput_lcd.h | 2
include/asm-m32r/opsput/opsput_pld.h | 2
include/asm-m68k/rtc.h | 2
include/asm-m68knommu/processor.h | 2
include/asm-mips/tx4938/tx4938_mips.h | 2
include/asm-parisc/rtc.h | 2
include/asm-powerpc/ipic.h | 2
include/asm-ppc/mv64x60_defs.h | 2
include/asm-ppc/rheap.h | 2
include/asm-ppc/rtc.h | 2
include/asm-s390/qdio.h | 2
include/asm-sh/bigsur/io.h | 2
include/asm-sh/bigsur/serial.h | 2
include/asm-sh/dreamcast/sysasic.h | 2
include/asm-sh/hd64465/io.h | 2
include/asm-sh/mpc1211/io.h | 2
include/asm-sh64/serial.h | 2
include/asm-sparc/reg.h | 2
include/asm-x86_64/cache.h | 2
include/asm-xtensa/a.out.h | 2
include/asm-xtensa/cache.h | 2
include/asm-xtensa/coprocessor.h | 2
include/asm-xtensa/dma-mapping.h | 2
include/asm-xtensa/ioctls.h | 2
include/asm-xtensa/pgtable.h | 2
include/asm-xtensa/siginfo.h | 2
include/linux/aio_abi.h | 2
include/linux/awe_voice.h | 2
include/linux/harrier_defs.h | 2
include/linux/lockd/xdr4.h | 2
include/linux/mtd/plat-ram.h | 2
include/linux/nfsd/stats.h | 2
include/linux/nfsd/xdr.h | 2
include/linux/ppdev.h | 2
include/linux/slab.h | 2
include/linux/sunrpc/auth_gss.h | 2
include/linux/sunrpc/gss_api.h | 2
include/linux/sunrpc/msg_prot.h | 2
include/linux/sunrpc/svcauth_gss.h | 2
include/linux/writeback.h | 2
include/video/s1d13xxxfb.h | 2
ipc/mqueue.c | 2
ipc/msgutil.c | 2
kernel/posix-timers.c | 2
kernel/rcutorture.c | 2
kernel/workqueue.c | 2
lib/reed_solomon/reed_solomon.c | 2
mm/Kconfig | 4
mm/nommu.c | 2
mm/page-writeback.c | 2
mm/vmalloc.c | 6
net/ipv4/Kconfig | 6
net/ipv4/arp.c | 2
net/ipv4/ipvs/Kconfig | 4
net/ipv4/netfilter/Kconfig | 2
net/sunrpc/auth_gss/auth_gss.c | 2
scripts/kernel-doc | 4
security/selinux/Kconfig | 4
sound/oss/Kconfig | 2
sound/oss/ad1848.c | 2
sound/oss/ad1848_mixer.h | 2
sound/oss/adlib_card.c | 2
sound/oss/audio.c | 2
sound/oss/awe_hw.h | 2
sound/oss/awe_wave.c | 2
sound/oss/awe_wave.h | 2
sound/oss/dev_table.c | 2
sound/oss/dmabuf.c | 2
sound/oss/gus_card.c | 2
sound/oss/gus_midi.c | 2
sound/oss/gus_wave.c | 2
sound/oss/harmony.c | 2
sound/oss/ics2101.c | 2
sound/oss/iwmem.h | 2
sound/oss/maui.c | 2
sound/oss/midi_synth.c | 2
sound/oss/midibuf.c | 2
sound/oss/mpu401.c | 2
sound/oss/opl3.c | 2
sound/oss/opl3sa.c | 2
sound/oss/opl3sa2.c | 2
sound/oss/pas2_card.c | 2
sound/oss/pas2_midi.c | 2
sound/oss/pas2_mixer.c | 2
sound/oss/pss.c | 2
sound/oss/sb_audio.c | 2
sound/oss/sb_common.c | 2
sound/oss/sb_midi.c | 2
sound/oss/sb_mixer.c | 2
sound/oss/sb_mixer.h | 2
sound/oss/sequencer.c | 2
sound/oss/sgalaxy.c | 2
sound/oss/sound_timer.c | 2
sound/oss/soundcard.c | 2
sound/oss/sscape.c | 2
sound/oss/sys_timer.c | 2
sound/oss/trix.c | 2
sound/oss/uart401.c | 2
sound/oss/uart6850.c | 2
sound/oss/v_midi.c | 2
sound/oss/waveartist.c | 2
sound/oss/waveartist.h | 2
sound/oss/wf_midi.c | 2
598 files changed, 1103 insertions(+), 1341 deletions(-)
^ permalink raw reply [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-06-26 20:26 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-06-26 20:26 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Adrian Bunk:
remove the bouncing email address of David Campbell
move acknowledgment for Mark Adler to CREDITS
Andreas Mohr:
spelling fixes
Egry Gabor:
i386: Trivial typo fixes
Jesper Juhl:
Clean up 'inline is not at beginning' warnings for usb storage
Lee Revell:
fix paniced->panicked typos
Matthew Martin:
ixj: make ixj_set_tone_off() static
Michael Hayes:
Spelling fixes for Documentation/atomic_ops.txt
olecom@mail.ru:
typo fixes
Tobias Klauser:
Storage class should be first
CREDITS | 5 +++
Documentation/DocBook/kernel-locking.tmpl | 2 -
Documentation/atomic_ops.txt | 28 ++++++++++-----------
Documentation/driver-model/overview.txt | 2 -
Documentation/kdump/gdbmacros.txt | 2 -
Documentation/scsi/ppa.txt | 2 -
arch/i386/Kconfig | 2 -
arch/i386/Kconfig.cpu | 2 -
arch/i386/kernel/cpu/cyrix.c | 2 -
arch/i386/kernel/crash.c | 2 -
arch/i386/kernel/i8259.c | 2 -
arch/i386/kernel/machine_kexec.c | 4 +--
arch/mips/momentum/ocelot_g/gt-irq.c | 4 +--
arch/mips/sgi-ip22/ip22-reset.c | 2 -
arch/mips/sgi-ip32/ip32-reset.c | 12 ++++-----
arch/powerpc/kernel/crash.c | 2 -
arch/powerpc/kernel/machine_kexec_32.c | 4 +--
arch/powerpc/platforms/cell/spufs/switch.c | 2 -
arch/powerpc/platforms/pseries/eeh_cache.c | 2 -
arch/ppc/kernel/machine_kexec.c | 4 +--
arch/s390/kernel/machine_kexec.c | 4 +--
arch/s390/kernel/vtime.c | 2 -
arch/sh/kernel/machine_kexec.c | 4 +--
arch/um/drivers/ubd_kern.c | 2 -
arch/x86_64/kernel/crash.c | 2 -
arch/x86_64/kernel/i8259.c | 2 -
arch/x86_64/kernel/machine_kexec.c | 4 +--
arch/x86_64/kernel/smp.c | 2 -
block/as-iosched.c | 2 -
block/ll_rw_blk.c | 4 +--
drivers/atm/firestream.c | 2 -
drivers/char/agp/amd-k7-agp.c | 2 -
drivers/char/agp/ati-agp.c | 2 -
drivers/char/agp/efficeon-agp.c | 2 -
drivers/char/ipmi/ipmi_msghandler.c | 6 ++--
drivers/char/rio/riointr.c | 2 -
drivers/hwmon/asb100.c | 2 -
drivers/hwmon/lm78.c | 2 -
drivers/hwmon/lm80.c | 2 -
drivers/hwmon/lm87.c | 2 -
drivers/hwmon/sis5595.c | 2 -
drivers/hwmon/smsc47m1.c | 2 -
drivers/hwmon/w83627hf.c | 2 -
drivers/hwmon/w83781d.c | 2 -
drivers/hwmon/w83792d.c | 2 -
drivers/ide/ide-disk.c | 2 -
drivers/ide/ide-io.c | 2 -
drivers/ieee1394/hosts.c | 2 -
drivers/ieee1394/ieee1394_core.h | 2 -
drivers/isdn/divert/isdn_divert.c | 2 -
drivers/media/video/bt8xx/bttv-cards.c | 2 -
drivers/net/3c501.c | 4 +--
drivers/net/irda/irport.c | 2 -
drivers/net/pcmcia/smc91c92_cs.c | 2 -
drivers/net/wireless/ipw2100.c | 2 -
drivers/parport/parport_gsc.c | 2 -
drivers/parport/parport_gsc.h | 2 -
drivers/parport/parport_pc.c | 2 -
drivers/parport/procfs.c | 2 -
drivers/pci/pci.c | 2 -
drivers/s390/scsi/zfcp_erp.c | 14 +++++-----
drivers/scsi/NCR5380.c | 2 -
drivers/scsi/advansys.c | 2 -
drivers/scsi/dc395x.c | 2 -
drivers/scsi/ibmmca.c | 8 +++---
drivers/scsi/imm.c | 3 --
drivers/scsi/imm.h | 2 -
drivers/scsi/ips.c | 4 +--
drivers/scsi/ppa.c | 2 -
drivers/scsi/ppa.h | 2 -
drivers/scsi/st.c | 2 -
drivers/telephony/ixj.c | 2 -
drivers/usb/storage/usb.h | 4 +--
fs/9p/mux.c | 2 -
fs/aio.c | 2 -
fs/jffs2/summary.c | 2 -
fs/jfs/jfs_extent.c | 8 +++---
include/asm-i386/system.h | 2 -
include/asm-m32r/system.h | 2 -
include/linux/sunrpc/gss_api.h | 2 -
lib/kernel_lock.c | 4 +--
lib/zlib_inflate/inftrees.c | 9 ------
mm/page_alloc.c | 2 -
mm/readahead.c | 4 +--
net/sunrpc/auth_gss/gss_krb5_mech.c | 2 -
net/sunrpc/auth_gss/gss_spkm3_mech.c | 2 -
sound/core/seq/seq_memory.h | 2 -
sound/oss/sb_ess.c | 28 ++++++++++-----------
sound/pci/cs5535audio/cs5535audio_pcm.c | 2 -
89 files changed, 147 insertions(+), 158 deletions(-)
diff --git a/CREDITS b/CREDITS
index 1d35f10..85c7c70 100644
--- a/CREDITS
+++ b/CREDITS
@@ -24,6 +24,11 @@ S: C. Negri 6, bl. D3
S: Iasi 6600
S: Romania
+N: Mark Adler
+E: madler@alumni.caltech.edu
+W: http://alumnus.caltech.edu/~madler/
+D: zlib decompression
+
N: Monalisa Agrawal
E: magrawal@nortelnetworks.com
D: Basic Interphase 5575 driver with UBR and ABR support.
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 158ffe9..644c388 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -1590,7 +1590,7 @@ the amount of locking which needs to be
<para>
Our final dilemma is this: when can we actually destroy the
removed element? Remember, a reader might be stepping through
- this element in the list right now: it we free this element and
+ this element in the list right now: if we free this element and
the <symbol>next</symbol> pointer changes, the reader will jump
off into garbage and crash. We need to wait until we know that
all the readers who were traversing the list when we deleted the
diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt
index 23a1c24..2a63d56 100644
--- a/Documentation/atomic_ops.txt
+++ b/Documentation/atomic_ops.txt
@@ -157,13 +157,13 @@ For example, smp_mb__before_atomic_dec()
smp_mb__before_atomic_dec();
atomic_dec(&obj->ref_count);
-It makes sure that all memory operations preceeding the atomic_dec()
+It makes sure that all memory operations preceding the atomic_dec()
call are strongly ordered with respect to the atomic counter
-operation. In the above example, it guarentees that the assignment of
+operation. In the above example, it guarantees that the assignment of
"1" to obj->dead will be globally visible to other cpus before the
atomic counter decrement.
-Without the explicitl smp_mb__before_atomic_dec() call, the
+Without the explicit smp_mb__before_atomic_dec() call, the
implementation could legally allow the atomic counter update visible
to other cpus before the "obj->dead = 1;" assignment.
@@ -173,11 +173,11 @@ (smp_mb__after_atomic_dec()) and around
(smp_mb__{before,after}_atomic_inc()).
A missing memory barrier in the cases where they are required by the
-atomic_t implementation above can have disasterous results. Here is
-an example, which follows a pattern occuring frequently in the Linux
+atomic_t implementation above can have disastrous results. Here is
+an example, which follows a pattern occurring frequently in the Linux
kernel. It is the use of atomic counters to implement reference
counting, and it works such that once the counter falls to zero it can
-be guarenteed that no other entity can be accessing the object:
+be guaranteed that no other entity can be accessing the object:
static void obj_list_add(struct obj *obj)
{
@@ -291,9 +291,9 @@ to the size of an "unsigned long" C data
size. The endianness of the bits within each "unsigned long" are the
native endianness of the cpu.
- void set_bit(unsigned long nr, volatils unsigned long *addr);
- void clear_bit(unsigned long nr, volatils unsigned long *addr);
- void change_bit(unsigned long nr, volatils unsigned long *addr);
+ void set_bit(unsigned long nr, volatile unsigned long *addr);
+ void clear_bit(unsigned long nr, volatile unsigned long *addr);
+ void change_bit(unsigned long nr, volatile unsigned long *addr);
These routines set, clear, and change, respectively, the bit number
indicated by "nr" on the bit mask pointed to by "ADDR".
@@ -301,9 +301,9 @@ indicated by "nr" on the bit mask pointe
They must execute atomically, yet there are no implicit memory barrier
semantics required of these interfaces.
- int test_and_set_bit(unsigned long nr, volatils unsigned long *addr);
- int test_and_clear_bit(unsigned long nr, volatils unsigned long *addr);
- int test_and_change_bit(unsigned long nr, volatils unsigned long *addr);
+ int test_and_set_bit(unsigned long nr, volatile unsigned long *addr);
+ int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr);
+ int test_and_change_bit(unsigned long nr, volatile unsigned long *addr);
Like the above, except that these routines return a boolean which
indicates whether the changed bit was set _BEFORE_ the atomic bit
@@ -335,7 +335,7 @@ subsequent memory operation is made visi
/* ... */;
obj->killed = 1;
-The implementation of test_and_set_bit() must guarentee that
+The implementation of test_and_set_bit() must guarantee that
"obj->dead = 1;" is visible to cpus before the atomic memory operation
done by test_and_set_bit() becomes visible. Likewise, the atomic
memory operation done by test_and_set_bit() must become visible before
@@ -474,7 +474,7 @@ Now, as far as memory barriers go, as lo
strictly orders all subsequent memory operations (including
the cas()) with respect to itself, things will be fine.
-Said another way, _atomic_dec_and_lock() must guarentee that
+Said another way, _atomic_dec_and_lock() must guarantee that
a counter dropping to zero is never made visible before the
spinlock being acquired.
diff --git a/Documentation/driver-model/overview.txt b/Documentation/driver-model/overview.txt
index ac4a7a7..2050c9f 100644
--- a/Documentation/driver-model/overview.txt
+++ b/Documentation/driver-model/overview.txt
@@ -18,7 +18,7 @@ Traditional driver models implemented so
(sometimes just a list) for the devices they control. There wasn't any
uniformity across the different bus types.
-The current driver model provides a comon, uniform data model for describing
+The current driver model provides a common, uniform data model for describing
a bus and the devices that can appear under the bus. The unified bus
model includes a set of common attributes which all busses carry, and a set
of common callbacks, such as device discovery during bus probing, bus
diff --git a/Documentation/kdump/gdbmacros.txt b/Documentation/kdump/gdbmacros.txt
index dcf5580..9b9b454 100644
--- a/Documentation/kdump/gdbmacros.txt
+++ b/Documentation/kdump/gdbmacros.txt
@@ -175,7 +175,7 @@ end
document trapinfo
Run info threads and lookup pid of thread #1
'trapinfo <pid>' will tell you by which trap & possibly
- addresthe kernel paniced.
+ address the kernel panicked.
end
diff --git a/Documentation/scsi/ppa.txt b/Documentation/scsi/ppa.txt
index 0dac88d..5d9223b 100644
--- a/Documentation/scsi/ppa.txt
+++ b/Documentation/scsi/ppa.txt
@@ -12,5 +12,3 @@ http://www.torque.net/parport/
Email list for Linux Parport
linux-parport@torque.net
-Email for problems with ZIP or ZIP Plus drivers
-campbell@torque.net
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 1596101..e14b207 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -721,7 +721,7 @@ config KEXEC
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
- but it is indepedent of the system firmware. And like a reboot
+ but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
The name comes from the similiarity to the exec system call.
diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
index eb13048..21c9a4e 100644
--- a/arch/i386/Kconfig.cpu
+++ b/arch/i386/Kconfig.cpu
@@ -41,7 +41,7 @@ config M386
- "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
- "Geode GX/LX" For AMD Geode GX and LX processors.
- "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
- - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
+ - "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above).
If you don't know what to do, choose "386".
diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c
index fc32c80..f03b7f9 100644
--- a/arch/i386/kernel/cpu/cyrix.c
+++ b/arch/i386/kernel/cpu/cyrix.c
@@ -354,7 +354,7 @@ static void __init init_nsc(struct cpuin
* This function only handles the GX processor, and kicks every
* thing else to the Cyrix init function above - that should
* cover any processors that might have been branded differently
- * after NSC aquired Cyrix.
+ * after NSC acquired Cyrix.
*
* If this breaks your GX1 horribly, please e-mail
* info-linux@ldcmail.amd.com to tell us.
diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c
index 21dc1bb..13288d9 100644
--- a/arch/i386/kernel/crash.c
+++ b/arch/i386/kernel/crash.c
@@ -163,7 +163,7 @@ #endif
void machine_crash_shutdown(struct pt_regs *regs)
{
/* This function is only called after the system
- * has paniced or is otherwise in a critical state.
+ * has panicked or is otherwise in a critical state.
* The minimum amount of code to allow a kexec'd kernel
* to run successfully needs to happen here.
*
diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c
index b7636b9..c1a42fe 100644
--- a/arch/i386/kernel/i8259.c
+++ b/arch/i386/kernel/i8259.c
@@ -175,7 +175,7 @@ static void mask_and_ack_8259A(unsigned
* Lightweight spurious IRQ detection. We do not want
* to overdo spurious IRQ handling - it's usually a sign
* of hardware problems, so we only do the checks we can
- * do without slowing down good hardware unnecesserily.
+ * do without slowing down good hardware unnecessarily.
*
* Note that IRQ7 and IRQ15 (the two spurious IRQs
* usually resulting from the 8259A-1|2 PICs) occur
diff --git a/arch/i386/kernel/machine_kexec.c b/arch/i386/kernel/machine_kexec.c
index f73d737..511abe5 100644
--- a/arch/i386/kernel/machine_kexec.c
+++ b/arch/i386/kernel/machine_kexec.c
@@ -133,9 +133,9 @@ typedef asmlinkage NORET_TYPE void (*rel
unsigned long start_address,
unsigned int has_pae) ATTRIB_NORET;
-const extern unsigned char relocate_new_kernel[];
+extern const unsigned char relocate_new_kernel[];
extern void relocate_new_kernel_end(void);
-const extern unsigned int relocate_new_kernel_size;
+extern const unsigned int relocate_new_kernel_size;
/*
* A architecture hook called to validate the
diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c
index e5eceed..8bd9b84 100644
--- a/arch/mips/momentum/ocelot_g/gt-irq.c
+++ b/arch/mips/momentum/ocelot_g/gt-irq.c
@@ -59,7 +59,7 @@ void hook_irq_handler(int int_cause, int
* bit_num - Indicates which bit number in the cause register
*
* Outputs :
- * 1 if succesful, 0 if failure
+ * 1 if successful, 0 if failure
*/
int enable_galileo_irq(int int_cause, int bit_num)
{
@@ -83,7 +83,7 @@ int enable_galileo_irq(int int_cause, in
* bit_num - Indicates which bit number in the cause register
*
* Outputs :
- * 1 if succesful, 0 if failure
+ * 1 if successful, 0 if failure
*/
int disable_galileo_irq(int int_cause, int bit_num)
{
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index a9c58e0..8134220 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -34,7 +34,7 @@ #include <asm/sgi/ip22.h>
#define POWERDOWN_TIMEOUT 120
/*
- * Blink frequency during reboot grace period and when paniced.
+ * Blink frequency during reboot grace period and when panicked.
*/
#define POWERDOWN_FREQ (HZ / 4)
#define PANIC_FREQ (HZ / 8)
diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c
index ab9d9ce..79ddb46 100644
--- a/arch/mips/sgi-ip32/ip32-reset.c
+++ b/arch/mips/sgi-ip32/ip32-reset.c
@@ -28,13 +28,13 @@ #include <asm/ip32/ip32_ints.h>
#define POWERDOWN_TIMEOUT 120
/*
- * Blink frequency during reboot grace period and when paniced.
+ * Blink frequency during reboot grace period and when panicked.
*/
#define POWERDOWN_FREQ (HZ / 4)
#define PANIC_FREQ (HZ / 8)
static struct timer_list power_timer, blink_timer, debounce_timer;
-static int has_paniced, shuting_down;
+static int has_panicked, shuting_down;
static void ip32_machine_restart(char *command) __attribute__((noreturn));
static void ip32_machine_halt(void) __attribute__((noreturn));
@@ -109,7 +109,7 @@ static void debounce(unsigned long data)
}
CMOS_WRITE(reg_a & ~DS_REGA_DV0, RTC_REG_A);
- if (has_paniced)
+ if (has_panicked)
ip32_machine_restart(NULL);
enable_irq(MACEISA_RTC_IRQ);
@@ -117,7 +117,7 @@ static void debounce(unsigned long data)
static inline void ip32_power_button(void)
{
- if (has_paniced)
+ if (has_panicked)
return;
if (shuting_down || kill_proc(1, SIGINT, 1)) {
@@ -161,9 +161,9 @@ static int panic_event(struct notifier_b
{
unsigned long led;
- if (has_paniced)
+ if (has_panicked)
return NOTIFY_DONE;
- has_paniced = 1;
+ has_panicked = 1;
/* turn off the green LED */
led = mace->perif.ctrl.misc | MACEISA_LED_GREEN;
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index dbcb859..e253a45 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -179,7 +179,7 @@ void default_machine_crash_shutdown(stru
/*
* This function is only called after the system
- * has paniced or is otherwise in a critical state.
+ * has panicked or is otherwise in a critical state.
* The minimum amount of code to allow a kexec'd kernel
* to run successfully needs to happen here.
*
diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kernel/machine_kexec_32.c
index 4436061..cbaa341 100644
--- a/arch/powerpc/kernel/machine_kexec_32.c
+++ b/arch/powerpc/kernel/machine_kexec_32.c
@@ -30,8 +30,8 @@ typedef NORET_TYPE void (*relocate_new_k
*/
void default_machine_kexec(struct kimage *image)
{
- const extern unsigned char relocate_new_kernel[];
- const extern unsigned int relocate_new_kernel_size;
+ extern const unsigned char relocate_new_kernel[];
+ extern const unsigned int relocate_new_kernel_size;
unsigned long page_list;
unsigned long reboot_code_buffer, reboot_code_buffer_phys;
relocate_new_kernel_t rnk;
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index b30e55d..3068b42 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -2100,7 +2100,7 @@ EXPORT_SYMBOL_GPL(spu_save);
* @spu: pointer to SPU iomem structure.
*
* Perform harvest + restore, as we may not be coming
- * from a previous succesful save operation, and the
+ * from a previous successful save operation, and the
* hardware state is unknown.
*/
int spu_restore(struct spu_state *new, struct spu *spu)
diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c
index 98c23ae..c37a849 100644
--- a/arch/powerpc/platforms/pseries/eeh_cache.c
+++ b/arch/powerpc/platforms/pseries/eeh_cache.c
@@ -287,7 +287,7 @@ void pci_addr_cache_remove_device(struct
* find the pci device that corresponds to a given address.
* This routine scans all pci busses to build the cache.
* Must be run late in boot process, after the pci controllers
- * have been scaned for devices (after all device resources are known).
+ * have been scanned for devices (after all device resources are known).
*/
void __init pci_addr_cache_build(void)
{
diff --git a/arch/ppc/kernel/machine_kexec.c b/arch/ppc/kernel/machine_kexec.c
index 84d65a8..a469ba4 100644
--- a/arch/ppc/kernel/machine_kexec.c
+++ b/arch/ppc/kernel/machine_kexec.c
@@ -25,8 +25,8 @@ typedef NORET_TYPE void (*relocate_new_k
unsigned long reboot_code_buffer,
unsigned long start_address) ATTRIB_NORET;
-const extern unsigned char relocate_new_kernel[];
-const extern unsigned int relocate_new_kernel_size;
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned int relocate_new_kernel_size;
void machine_shutdown(void)
{
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index bad81b5..fbde6a9 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -27,8 +27,8 @@ static void kexec_halt_all_cpus(void *);
typedef void (*relocate_kernel_t) (kimage_entry_t *, unsigned long);
-const extern unsigned char relocate_kernel[];
-const extern unsigned long long relocate_kernel_len;
+extern const unsigned char relocate_kernel[];
+extern const unsigned long long relocate_kernel_len;
int
machine_kexec_prepare(struct kimage *image)
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index dfe6f08..1f0439d 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -356,7 +356,7 @@ static void internal_add_vtimer(struct v
set_vtimer(event->expires);
spin_unlock_irqrestore(&vt_list->lock, flags);
- /* release CPU aquired in prepare_vtimer or mod_virt_timer() */
+ /* release CPU acquired in prepare_vtimer or mod_virt_timer() */
put_cpu();
}
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 4354652..6bcd8d9 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -25,8 +25,8 @@ typedef NORET_TYPE void (*relocate_new_k
unsigned long start_address,
unsigned long vbr_reg) ATTRIB_NORET;
-const extern unsigned char relocate_new_kernel[];
-const extern unsigned int relocate_new_kernel_size;
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned int relocate_new_kernel_size;
extern void *gdb_vbr_vector;
/*
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 0897852..290cec6 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -1222,7 +1222,7 @@ int open_ubd_file(char *file, struct ope
}
}
- /* Succesful return case! */
+ /* Successful return case! */
if(backing_file_out == NULL)
return(fd);
diff --git a/arch/x86_64/kernel/crash.c b/arch/x86_64/kernel/crash.c
index 4e6c3b7..15beddc 100644
--- a/arch/x86_64/kernel/crash.c
+++ b/arch/x86_64/kernel/crash.c
@@ -161,7 +161,7 @@ void machine_crash_shutdown(struct pt_re
{
/*
* This function is only called after the system
- * has paniced or is otherwise in a critical state.
+ * has panicked or is otherwise in a critical state.
* The minimum amount of code to allow a kexec'd kernel
* to run successfully needs to happen here.
*
diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c
index 5ecd34a..573990a 100644
--- a/arch/x86_64/kernel/i8259.c
+++ b/arch/x86_64/kernel/i8259.c
@@ -278,7 +278,7 @@ static void mask_and_ack_8259A(unsigned
* Lightweight spurious IRQ detection. We do not want
* to overdo spurious IRQ handling - it's usually a sign
* of hardware problems, so we only do the checks we can
- * do without slowing down good hardware unnecesserily.
+ * do without slowing down good hardware unnecessarily.
*
* Note that IRQ7 and IRQ15 (the two spurious IRQs
* usually resulting from the 8259A-1|2 PICs) occur
diff --git a/arch/x86_64/kernel/machine_kexec.c b/arch/x86_64/kernel/machine_kexec.c
index 25ac8a3..83fb24a 100644
--- a/arch/x86_64/kernel/machine_kexec.c
+++ b/arch/x86_64/kernel/machine_kexec.c
@@ -149,8 +149,8 @@ typedef NORET_TYPE void (*relocate_new_k
unsigned long start_address,
unsigned long pgtable) ATTRIB_NORET;
-const extern unsigned char relocate_new_kernel[];
-const extern unsigned long relocate_new_kernel_size;
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned long relocate_new_kernel_size;
int machine_kexec_prepare(struct kimage *image)
{
diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c
index 4a6628b..e369a34 100644
--- a/arch/x86_64/kernel/smp.c
+++ b/arch/x86_64/kernel/smp.c
@@ -470,7 +470,7 @@ void smp_send_stop(void)
return;
/* Don't deadlock on the call lock in panic */
if (!spin_trylock(&call_lock)) {
- /* ignore locking because we have paniced anyways */
+ /* ignore locking because we have panicked anyways */
nolock = 1;
}
__smp_call_function(smp_really_stop_cpu, NULL, 0, 0);
diff --git a/block/as-iosched.c b/block/as-iosched.c
index 1ec5df4..3af31ed 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -892,7 +892,7 @@ static int as_can_break_anticipation(str
}
/*
- * as_can_anticipate indicates weather we should either run arq
+ * as_can_anticipate indicates whether we should either run arq
* or keep anticipating a better request.
*/
static int as_can_anticipate(struct as_data *ad, struct as_rq *arq)
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 0603ab2..c04422a 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -2745,7 +2745,7 @@ static int attempt_merge(request_queue_t
return 0;
/*
- * not contigious
+ * not contiguous
*/
if (req->sector + req->nr_sectors != next->sector)
return 0;
@@ -3415,7 +3415,7 @@ #endif /* CONFIG_HOTPLUG_CPU */
*
* Description:
* Ends all I/O on a request. It does not handle partial completions,
- * unless the driver actually implements this in its completionc callback
+ * unless the driver actually implements this in its completion callback
* through requeueing. Theh actual completion happens out-of-order,
* through a softirq handler. The user must have registered a completion
* callback through blk_queue_softirq_done().
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 7f7ec28..f2eeaf9 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -951,7 +951,7 @@ static int fs_open(struct atm_vcc *atm_v
it most likely that the chip will notice it. It also prevents us
from having to wait for completion. On the other hand, we may
need to wait for completion anyway, to see if it completed
- succesfully. */
+ successfully. */
switch (atm_vcc->qos.aal) {
case ATM_AAL2:
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index 1f77665..51d0d56 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -118,7 +118,7 @@ static int amd_create_gatt_pages(int nr_
return retval;
}
-/* Since we don't need contigious memory we just try
+/* Since we don't need contiguous memory we just try
* to get the gatt table once
*/
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 06fd10b..1605643 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -261,7 +261,7 @@ static int agp_ati_suspend(struct pci_de
#endif
/*
- *Since we don't need contigious memory we just try
+ *Since we don't need contiguous memory we just try
* to get the gatt table once
*/
diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c
index 86a966b..b788b0a 100644
--- a/drivers/char/agp/efficeon-agp.c
+++ b/drivers/char/agp/efficeon-agp.c
@@ -177,7 +177,7 @@ static int efficeon_free_gatt_table(stru
/*
- * Since we don't need contigious memory we just try
+ * Since we don't need contiguous memory we just try
* to get the gatt table once
*/
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 9f2f8fd..586f1f8 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -3677,7 +3677,7 @@ #endif /* CONFIG_IPMI_PANIC_STRING */
}
#endif /* CONFIG_IPMI_PANIC_EVENT */
-static int has_paniced = 0;
+static int has_panicked = 0;
static int panic_event(struct notifier_block *this,
unsigned long event,
@@ -3686,9 +3686,9 @@ static int panic_event(struct notifier_b
int i;
ipmi_smi_t intf;
- if (has_paniced)
+ if (has_panicked)
return NOTIFY_DONE;
- has_paniced = 1;
+ has_panicked = 1;
/* For every registered interface, set it to run to completion. */
for (i = 0; i < MAX_IPMI_INTERFACES; i++) {
diff --git a/drivers/char/rio/riointr.c b/drivers/char/rio/riointr.c
index eec1fea..0bd0904 100644
--- a/drivers/char/rio/riointr.c
+++ b/drivers/char/rio/riointr.c
@@ -546,7 +546,7 @@ static void RIOReceive(struct rio_info *
** run out of space it will be set to the offset of the
** next byte to copy from the packet data area. The packet
** length field is decremented by the number of bytes that
- ** we succesfully removed from the packet. When this reaches
+ ** we successfully removed from the packet. When this reaches
** zero, we reset the offset pointer to be zero, and free
** the packet from the front of the queue.
*/
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 65b2709..facc1cc 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -341,7 +341,7 @@ static ssize_t set_fan_min(struct device
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
- least suprise; the user doesn't expect the fan minimum to change just
+ least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t set_fan_div(struct device *dev, const char *buf,
size_t count, int nr)
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 94be3d7..a6ce7ab 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -358,7 +358,7 @@ static ssize_t show_fan_div(struct devic
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
- least suprise; the user doesn't expect the fan minimum to change just
+ least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t set_fan_div(struct device *dev, const char *buf,
size_t count, int nr)
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index f72120d..b4ccdfc 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -253,7 +253,7 @@ set_fan(min2, fan_min[1], LM80_REG_FAN_M
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
- least suprise; the user doesn't expect the fan minimum to change just
+ least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t set_fan_div(struct device *dev, const char *buf,
size_t count, int nr)
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index e229daf..e6c1b63 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -421,7 +421,7 @@ static void set_fan_min(struct device *d
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan clock divider. This follows the principle
- of least suprise; the user doesn't expect the fan minimum to change just
+ of least surprise; the user doesn't expect the fan minimum to change just
because the divider changed. */
static ssize_t set_fan_div(struct device *dev, const char *buf,
size_t count, int nr)
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 6f3fda7..063f71c 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -380,7 +380,7 @@ static ssize_t show_fan_div(struct devic
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
- least suprise; the user doesn't expect the fan minimum to change just
+ least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t set_fan_div(struct device *dev, const char *buf,
size_t count, int nr)
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 7732aec..825e8f7 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -207,7 +207,7 @@ static ssize_t set_fan_min(struct device
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan clock divider. This follows the principle
- of least suprise; the user doesn't expect the fan minimum to change just
+ of least surprise; the user doesn't expect the fan minimum to change just
because the divider changed. */
static ssize_t set_fan_div(struct device *dev, const char *buf,
size_t count, int nr)
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 71fb7f1..79368d5 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -781,7 +781,7 @@ show_fan_div_reg(struct device *dev, cha
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
- least suprise; the user doesn't expect the fan minimum to change just
+ least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t
store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index e4c7003..7be469e 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -630,7 +630,7 @@ show_fan_div_reg(struct device *dev, cha
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
- least suprise; the user doesn't expect the fan minimum to change just
+ least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t
store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 4ef884c..e407c74 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -463,7 +463,7 @@ show_fan_div(struct device *dev, struct
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
- least suprise; the user doesn't expect the fan minimum to change just
+ least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t
store_fan_div(struct device *dev, struct device_attribute *attr,
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index a5017de..f033d73 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -37,7 +37,7 @@
* Version 1.15 convert all calls to ide_raw_taskfile
* since args will return register content.
* Version 1.16 added suspend-resume-checkpower
- * Version 1.17 do flush on standy, do flush on ATA < ATA6
+ * Version 1.17 do flush on standby, do flush on ATA < ATA6
* fix wcache setup.
*/
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 622a55c..05ba8e0 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -1665,7 +1665,7 @@ #endif /* CONFIG_BLK_DEV_IDEPCI */
* Initialize a request before we fill it in and send it down to
* ide_do_drive_cmd. Commands must be set up by this function. Right
* now it doesn't do a lot, but if that changes abusers will have a
- * nasty suprise.
+ * nasty surprise.
*/
void ide_init_drive_cmd (struct request *rq)
diff --git a/drivers/ieee1394/hosts.c b/drivers/ieee1394/hosts.c
index 2d47b11..ad49c04 100644
--- a/drivers/ieee1394/hosts.c
+++ b/drivers/ieee1394/hosts.c
@@ -103,7 +103,7 @@ static int alloc_hostnum_cb(struct hpsb_
* driver specific parts, enable the controller and make it available
* to the general subsystem using hpsb_add_host().
*
- * Return Value: a pointer to the &hpsb_host if succesful, %NULL if
+ * Return Value: a pointer to the &hpsb_host if successful, %NULL if
* no memory was available.
*/
static DEFINE_MUTEX(host_num_alloc);
diff --git a/drivers/ieee1394/ieee1394_core.h b/drivers/ieee1394/ieee1394_core.h
index e7b55e8..0ecbf33 100644
--- a/drivers/ieee1394/ieee1394_core.h
+++ b/drivers/ieee1394/ieee1394_core.h
@@ -139,7 +139,7 @@ int hpsb_bus_reset(struct hpsb_host *hos
/*
* Hand over received selfid packet to the core. Complement check (second
- * quadlet is complement of first) is expected to be done and succesful.
+ * quadlet is complement of first) is expected to be done and successful.
*/
void hpsb_selfid_received(struct hpsb_host *host, quadlet_t sid);
diff --git a/drivers/isdn/divert/isdn_divert.c b/drivers/isdn/divert/isdn_divert.c
index f1a1f9a..1f5ebe9 100644
--- a/drivers/isdn/divert/isdn_divert.c
+++ b/drivers/isdn/divert/isdn_divert.c
@@ -592,7 +592,7 @@ static int put_address(char *st, u_char
} /* put_address */
/*************************************/
-/* report a succesfull interrogation */
+/* report a successful interrogation */
/*************************************/
static int interrogate_success(isdn_ctrl *ic, struct call_struc *cs)
{ char *src = ic->parm.dss1_io.data;
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 3116345..e68a6d2 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4848,7 +4848,7 @@ static void picolo_tetra_muxsel (struct
*
* The IVC120G security card has 4 i2c controlled TDA8540 matrix
* swichers to provide 16 channels to MUX0. The TDA8540's have
- * 4 indepedant outputs and as such the IVC120G also has the
+ * 4 independent outputs and as such the IVC120G also has the
* optional "Monitor Out" bus. This allows the card to be looking
* at one input while the monitor is looking at another.
*
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
index bb44509..07136ec 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/3c501.c
@@ -508,11 +508,11 @@ static int el_start_xmit(struct sk_buff
* speak of. We simply pull the packet out of its PIO buffer (which is slow)
* and queue it for the kernel. Then we reset the card for the next packet.
*
- * We sometimes get suprise interrupts late both because the SMP IRQ delivery
+ * We sometimes get surprise interrupts late both because the SMP IRQ delivery
* is message passing and because the card sometimes seems to deliver late. I
* think if it is part way through a receive and the mode is changed it carries
* on receiving and sends us an interrupt. We have to band aid all these cases
- * to get a sensible 150kbytes/second performance. Even then you want a small
+ * to get a sensible 150kBytes/second performance. Even then you want a small
* TCP window.
*/
diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
index 98fa531..44efd49 100644
--- a/drivers/net/irda/irport.c
+++ b/drivers/net/irda/irport.c
@@ -386,7 +386,7 @@ static int __irport_change_speed(struct
/* Locking notes : this function may be called from irq context with
* spinlock, via irport_write_wakeup(), or from non-interrupt without
* spinlock (from the task timer). Yuck !
- * This is ugly, and unsafe is the spinlock is not already aquired.
+ * This is ugly, and unsafe is the spinlock is not already acquired.
* This will be fixed when irda-task get rewritten.
* Jean II */
if (!spin_is_locked(&self->lock)) {
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index e74bf50..a73d545 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -1883,7 +1883,7 @@ static void smc_reset(struct net_device
/* Set the Window 1 control, configuration and station addr registers.
No point in writing the I/O base register ;-> */
SMC_SELECT_BANK(1);
- /* Automatically release succesfully transmitted packets,
+ /* Automatically release successfully transmitted packets,
Accept link errors, counter and Tx error interrupts. */
outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
ioaddr + CONTROL);
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 72335c8..94aeb23 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -1485,7 +1485,7 @@ #define HW_POWER_DOWN_DELAY (msecs_to_ji
*
* Sending the PREPARE_FOR_POWER_DOWN will restrict the
* hardware from going into standby mode and will transition
- * out of D0-standy if it is already in that state.
+ * out of D0-standby if it is already in that state.
*
* STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
* driver upon completion. Once received, the driver can
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index 1de52d9..7352104 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -15,7 +15,7 @@
* Phil Blundell <philb@gnu.org>
* Tim Waugh <tim@cyberelk.demon.co.uk>
* Jose Renau <renau@acm.org>
- * David Campbell <campbell@torque.net>
+ * David Campbell
* Andrea Arcangeli
*/
diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h
index 662f6c1..fc9c37c 100644
--- a/drivers/parport/parport_gsc.h
+++ b/drivers/parport/parport_gsc.h
@@ -24,7 +24,7 @@
* Phil Blundell <Philip.Blundell@pobox.com>
* Tim Waugh <tim@cyberelk.demon.co.uk>
* Jose Renau <renau@acm.org>
- * David Campbell <campbell@torque.net>
+ * David Campbell
* Andrea Arcangeli
*/
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 48bbf32..7318e4a 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -3,7 +3,7 @@
* Authors: Phil Blundell <philb@gnu.org>
* Tim Waugh <tim@cyberelk.demon.co.uk>
* Jose Renau <renau@acm.org>
- * David Campbell <campbell@torque.net>
+ * David Campbell
* Andrea Arcangeli
*
* based on work by Grant Guenther <grant@torque.net> and Phil Blundell.
diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c
index cbe1718..8610ae8 100644
--- a/drivers/parport/procfs.c
+++ b/drivers/parport/procfs.c
@@ -1,6 +1,6 @@
/* Sysctl interface for parport devices.
*
- * Authors: David Campbell <campbell@torque.net>
+ * Authors: David Campbell
* Tim Waugh <tim@cyberelk.demon.co.uk>
* Philip Blundell <philb@gnu.org>
* Andrea Arcangeli
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d408a3c..23d3b17 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -369,7 +369,7 @@ pci_set_power_state(struct pci_dev *dev,
/*
* Give firmware a chance to be called, such as ACPI _PRx, _PSx
- * Firmware method after natice method ?
+ * Firmware method after native method ?
*/
if (platform_pci_set_power_state)
platform_pci_set_power_state(dev, state);
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 4682c8b..909731b 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -167,7 +167,7 @@ zfcp_fsf_scsi_er_timeout_handler(unsigne
* initiates adapter recovery which is done
* asynchronously
*
- * returns: 0 - initiated action succesfully
+ * returns: 0 - initiated action successfully
* <0 - failed to initiate action
*/
int
@@ -203,7 +203,7 @@ zfcp_erp_adapter_reopen_internal(struct
* purpose: Wrappper for zfcp_erp_adapter_reopen_internal
* used to ensure the correct locking
*
- * returns: 0 - initiated action succesfully
+ * returns: 0 - initiated action successfully
* <0 - failed to initiate action
*/
int
@@ -469,7 +469,7 @@ zfcp_test_link(struct zfcp_port *port)
* initiates Forced Reopen recovery which is done
* asynchronously
*
- * returns: 0 - initiated action succesfully
+ * returns: 0 - initiated action successfully
* <0 - failed to initiate action
*/
static int
@@ -509,7 +509,7 @@ zfcp_erp_port_forced_reopen_internal(str
* purpose: Wrappper for zfcp_erp_port_forced_reopen_internal
* used to ensure the correct locking
*
- * returns: 0 - initiated action succesfully
+ * returns: 0 - initiated action successfully
* <0 - failed to initiate action
*/
int
@@ -536,7 +536,7 @@ zfcp_erp_port_forced_reopen(struct zfcp_
* initiates Reopen recovery which is done
* asynchronously
*
- * returns: 0 - initiated action succesfully
+ * returns: 0 - initiated action successfully
* <0 - failed to initiate action
*/
static int
@@ -605,7 +605,7 @@ zfcp_erp_port_reopen(struct zfcp_port *p
* initiates Reopen recovery which is done
* asynchronously
*
- * returns: 0 - initiated action succesfully
+ * returns: 0 - initiated action successfully
* <0 - failed to initiate action
*/
static int
@@ -1805,7 +1805,7 @@ zfcp_erp_modify_unit_status(struct zfcp_
* purpose: Wrappper for zfcp_erp_port_reopen_all_internal
* used to ensure the correct locking
*
- * returns: 0 - initiated action succesfully
+ * returns: 0 - initiated action successfully
* <0 - failed to initiate action
*/
int
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index fa57e0b..75f2f7a 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -500,7 +500,7 @@ #endif
/*
* Function : int should_disconnect (unsigned char cmd)
*
- * Purpose : decide weather a command would normally disconnect or
+ * Purpose : decide whether a command would normally disconnect or
* not, since if it won't disconnect we should go to sleep.
*
* Input : cmd - opcode of SCSI command
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 5ee4755..dd9fb3d 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -12374,7 +12374,7 @@ AscInitFromEEP(ASC_DVC_VAR *asc_dvc)
ASC_PRINT1(
"AscInitFromEEP: Failed to re-write EEPROM with %d errors.\n", i);
} else {
- ASC_PRINT("AscInitFromEEP: Succesfully re-wrote EEPROM.");
+ ASC_PRINT("AscInitFromEEP: Successfully re-wrote EEPROM.\n");
}
}
return (warn_code);
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 1832452..58b0748 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -3771,7 +3771,7 @@ static void request_sense(struct Adapter
* @target: The target for the new device.
* @lun: The lun for the new device.
*
- * Return the new device if succesfull or NULL on failure.
+ * Return the new device if successful or NULL on failure.
**/
static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
u8 target, u8 lun)
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
index 115f554..497f664 100644
--- a/drivers/scsi/ibmmca.c
+++ b/drivers/scsi/ibmmca.c
@@ -760,7 +760,7 @@ static int device_inquiry(int host_index
while (!got_interrupt(host_index))
barrier();
- /*if command succesful, break */
+ /*if command successful, break */
if ((stat_result(host_index) == IM_SCB_CMD_COMPLETED) || (stat_result(host_index) == IM_SCB_CMD_COMPLETED_WITH_RETRIES))
return 1;
}
@@ -885,7 +885,7 @@ static int immediate_assign(int host_ind
while (!got_interrupt(host_index))
barrier();
- /*if command succesful, break */
+ /*if command successful, break */
if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
return 1;
}
@@ -921,7 +921,7 @@ static int immediate_feature(int host_in
return 2;
} else
global_command_error_excuse = 0;
- /*if command succesful, break */
+ /*if command successful, break */
if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
return 1;
}
@@ -959,7 +959,7 @@ static int immediate_reset(int host_inde
/* did not work, finish */
return 1;
}
- /*if command succesful, break */
+ /*if command successful, break */
if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
return 1;
}
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index cd2dffd..681bd18 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -3,9 +3,6 @@
*
* (The IMM is the embedded controller in the ZIP Plus drive.)
*
- * Current Maintainer: David Campbell (Perth, Western Australia)
- * campbell@torque.net
- *
* My unoffical company acronym list is 21 pages long:
* FLA: Four letter acronym with built in facility for
* future expansion to five letters.
diff --git a/drivers/scsi/imm.h b/drivers/scsi/imm.h
index dc3aebf..ece936a 100644
--- a/drivers/scsi/imm.h
+++ b/drivers/scsi/imm.h
@@ -2,7 +2,7 @@
/* Driver for the Iomega MatchMaker parallel port SCSI HBA embedded in
* the Iomega ZIP Plus drive
*
- * (c) 1998 David Campbell campbell@torque.net
+ * (c) 1998 David Campbell
*
* Please note that I live in Perth, Western Australia. GMT+0800
*/
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 5353b28..78f2ff7 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -6438,7 +6438,7 @@ ips_erase_bios(ips_ha_t * ha)
/* VPP failure */
return (1);
- /* check for succesful flash */
+ /* check for successful flash */
if (status & 0x30)
/* sequence error */
return (1);
@@ -6550,7 +6550,7 @@ ips_erase_bios_memio(ips_ha_t * ha)
/* VPP failure */
return (1);
- /* check for succesful flash */
+ /* check for successful flash */
if (status & 0x30)
/* sequence error */
return (1);
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index 108910f..d58ac5a 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -6,8 +6,6 @@
* (c) 1995,1996 Grant R. Guenther, grant@torque.net,
* under the terms of the GNU General Public License.
*
- * Current Maintainer: David Campbell (Perth, Western Australia, GMT+0800)
- * campbell@torque.net
*/
#include <linux/config.h>
diff --git a/drivers/scsi/ppa.h b/drivers/scsi/ppa.h
index f6e1a15..7511df3 100644
--- a/drivers/scsi/ppa.h
+++ b/drivers/scsi/ppa.h
@@ -2,7 +2,7 @@
* the Iomega ZIP drive
*
* (c) 1996 Grant R. Guenther grant@torque.net
- * David Campbell campbell@torque.net
+ * David Campbell
*
* All comments to David.
*/
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 1272dd2..b5218fc 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -2818,7 +2818,7 @@ static int st_int_ioctl(struct scsi_tape
(cmdstatp->sense_hdr.sense_key == NO_SENSE ||
cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
undone == 0) {
- ioctl_result = 0; /* EOF written succesfully at EOM */
+ ioctl_result = 0; /* EOF written successfully at EOM */
if (fileno >= 0)
fileno++;
STps->drv_file = fileno;
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index 5578a9d..f6b2948 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -5712,7 +5712,7 @@ static int ixj_daa_write(IXJ *j)
return 1;
}
-int ixj_set_tone_off(unsigned short arg, IXJ *j)
+static int ixj_set_tone_off(unsigned short arg, IXJ *j)
{
j->tone_off_time = arg;
if (ixj_WriteDSPCommand(0x6E05, j)) /* Set Tone Off Period */
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 009fb09..5284abe 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -160,10 +160,10 @@ #endif
};
/* Convert between us_data and the corresponding Scsi_Host */
-static struct Scsi_Host inline *us_to_host(struct us_data *us) {
+static inline struct Scsi_Host *us_to_host(struct us_data *us) {
return container_of((void *) us, struct Scsi_Host, hostdata);
}
-static struct us_data inline *host_to_us(struct Scsi_Host *host) {
+static inline struct us_data *host_to_us(struct Scsi_Host *host) {
return (struct us_data *) host->hostdata;
}
diff --git a/fs/9p/mux.c b/fs/9p/mux.c
index f4407eb..12e1baa 100644
--- a/fs/9p/mux.c
+++ b/fs/9p/mux.c
@@ -712,7 +712,7 @@ static void v9fs_read_work(void *a)
* v9fs_send_request - send 9P request
* The function can sleep until the request is scheduled for sending.
* The function can be interrupted. Return from the function is not
- * a guarantee that the request is sent succesfully. Can return errors
+ * a guarantee that the request is sent successfully. Can return errors
* that can be retrieved by PTR_ERR macros.
*
* @m: mux data
diff --git a/fs/aio.c b/fs/aio.c
index 8c34a62..9506301 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -641,7 +641,7 @@ static inline int __queue_kicked_iocb(st
* invoked both for initial i/o submission and
* subsequent retries via the aio_kick_handler.
* Expects to be invoked with iocb->ki_ctx->lock
- * already held. The lock is released and reaquired
+ * already held. The lock is released and reacquired
* as needed during processing.
*
* Calls the iocb retry method (already setup for the
diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c
index 0b02fc7..be1acc3 100644
--- a/fs/jffs2/summary.c
+++ b/fs/jffs2/summary.c
@@ -43,7 +43,7 @@ int jffs2_sum_init(struct jffs2_sb_info
return -ENOMEM;
}
- dbg_summary("returned succesfully\n");
+ dbg_summary("returned successfully\n");
return 0;
}
diff --git a/fs/jfs/jfs_extent.c b/fs/jfs/jfs_extent.c
index 5549378..4d52593 100644
--- a/fs/jfs/jfs_extent.c
+++ b/fs/jfs/jfs_extent.c
@@ -126,7 +126,7 @@ extAlloc(struct inode *ip, s64 xlen, s64
/* allocate the disk blocks for the extent. initially, extBalloc()
* will try to allocate disk blocks for the requested size (xlen).
- * if this fails (xlen contigious free blocks not avaliable), it'll
+ * if this fails (xlen contiguous free blocks not avaliable), it'll
* try to allocate a smaller number of blocks (producing a smaller
* extent), with this smaller number of blocks consisting of the
* requested number of blocks rounded down to the next smaller
@@ -493,7 +493,7 @@ #endif /* _NOTYET */
*
* initially, we will try to allocate disk blocks for the
* requested size (nblocks). if this fails (nblocks
- * contigious free blocks not avaliable), we'll try to allocate
+ * contiguous free blocks not avaliable), we'll try to allocate
* a smaller number of blocks (producing a smaller extent), with
* this smaller number of blocks consisting of the requested
* number of blocks rounded down to the next smaller power of 2
@@ -529,7 +529,7 @@ extBalloc(struct inode *ip, s64 hint, s6
/* get the number of blocks to initially attempt to allocate.
* we'll first try the number of blocks requested unless this
- * number is greater than the maximum number of contigious free
+ * number is greater than the maximum number of contiguous free
* blocks in the map. in that case, we'll start off with the
* maximum free.
*/
@@ -586,7 +586,7 @@ #ifdef _NOTYET
* in place. if this fails, we'll try to move the extent
* to a new set of blocks. if moving the extent, we initially
* will try to allocate disk blocks for the requested size
- * (nnew). if this fails (nnew contigious free blocks not
+ * (nnew). if this fails (new contiguous free blocks not
* avaliable), we'll try to allocate a smaller number of
* blocks (producing a smaller extent), with this smaller
* number of blocks consisting of the requested number of
diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h
index 0249f91..cab0180 100644
--- a/include/asm-i386/system.h
+++ b/include/asm-i386/system.h
@@ -427,7 +427,7 @@ #define rmb() alternative("lock; addl $0
* does not enforce ordering, since there is no data dependency between
* the read of "a" and the read of "b". Therefore, on some CPUs, such
* as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like thiswhere there are no data dependencies.
+ * in cases like this where there are no data dependencies.
**/
#define read_barrier_depends() do { } while(0)
diff --git a/include/asm-m32r/system.h b/include/asm-m32r/system.h
index 33567e8..66c4742 100644
--- a/include/asm-m32r/system.h
+++ b/include/asm-m32r/system.h
@@ -318,7 +318,7 @@ #define wmb() mb()
* does not enforce ordering, since there is no data dependency between
* the read of "a" and the read of "b". Therefore, on some CPUs, such
* as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like thiswhere there are no data dependencies.
+ * in cases like this where there are no data dependencies.
**/
#define read_barrier_depends() do { } while (0)
diff --git a/include/linux/sunrpc/gss_api.h b/include/linux/sunrpc/gss_api.h
index 9b8bcf1..6e112cc 100644
--- a/include/linux/sunrpc/gss_api.h
+++ b/include/linux/sunrpc/gss_api.h
@@ -126,7 +126,7 @@ struct gss_api_mech *gss_mech_get_by_pse
/* Just increments the mechanism's reference count and returns its input: */
struct gss_api_mech * gss_mech_get(struct gss_api_mech *);
-/* For every succesful gss_mech_get or gss_mech_get_by_* call there must be a
+/* For every successful gss_mech_get or gss_mech_get_by_* call there must be a
* corresponding call to gss_mech_put. */
void gss_mech_put(struct gss_api_mech *);
diff --git a/lib/kernel_lock.c b/lib/kernel_lock.c
index cb5490e..e713e86 100644
--- a/lib/kernel_lock.c
+++ b/lib/kernel_lock.c
@@ -14,7 +14,7 @@ #ifdef CONFIG_PREEMPT_BKL
* The 'big kernel semaphore'
*
* This mutex is taken and released recursively by lock_kernel()
- * and unlock_kernel(). It is transparently dropped and reaquired
+ * and unlock_kernel(). It is transparently dropped and reacquired
* over schedule(). It is used to protect legacy code that hasn't
* been migrated to a proper locking design yet.
*
@@ -92,7 +92,7 @@ #else
* The 'big kernel lock'
*
* This spinlock is taken and released recursively by lock_kernel()
- * and unlock_kernel(). It is transparently dropped and reaquired
+ * and unlock_kernel(). It is transparently dropped and reacquired
* over schedule(). It is used to protect legacy code that hasn't
* been migrated to a proper locking design yet.
*
diff --git a/lib/zlib_inflate/inftrees.c b/lib/zlib_inflate/inftrees.c
index 62343c5..da665fb 100644
--- a/lib/zlib_inflate/inftrees.c
+++ b/lib/zlib_inflate/inftrees.c
@@ -8,15 +8,6 @@ #include "inftrees.h"
#define MAXBITS 15
-const char inflate_copyright[] =
- " inflate 1.2.3 Copyright 1995-2005 Mark Adler ";
-/*
- If you use the zlib library in a product, an acknowledgment is welcome
- in the documentation of your product. If for some reason you cannot
- include such an acknowledgment, I would appreciate that you keep this
- copyright string in the executable of your product.
- */
-
/*
Build a set of tables to decode the provided canonical Huffman code.
The code lengths are lens[0..codes-1]. The result starts at *table,
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 6c1174f..9f86191 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -266,7 +266,7 @@ static inline void rmv_page_order(struct
* satisfies the following equation:
* P = B & ~(1 << O)
*
- * Assumption: *_mem_map is contigious at least up to MAX_ORDER
+ * Assumption: *_mem_map is contiguous at least up to MAX_ORDER
*/
static inline struct page *
__page_find_buddy(struct page *page, unsigned long page_idx, unsigned int order)
diff --git a/mm/readahead.c b/mm/readahead.c
index e39e416..aa7ec42 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -390,8 +390,8 @@ int do_page_cache_readahead(struct addre
* Read 'nr_to_read' pages starting at page 'offset'. If the flag 'block'
* is set wait till the read completes. Otherwise attempt to read without
* blocking.
- * Returns 1 meaning 'success' if read is succesfull without switching off
- * readhaead mode. Otherwise return failure.
+ * Returns 1 meaning 'success' if read is successful without switching off
+ * readahead mode. Otherwise return failure.
*/
static int
blockable_page_cache_readahead(struct address_space *mapping, struct file *filp,
diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c
index 129e2bd..b8714a8 100644
--- a/net/sunrpc/auth_gss/gss_krb5_mech.c
+++ b/net/sunrpc/auth_gss/gss_krb5_mech.c
@@ -169,7 +169,7 @@ gss_import_sec_context_kerberos(const vo
}
ctx_id->internal_ctx_id = ctx;
- dprintk("RPC: Succesfully imported new context.\n");
+ dprintk("RPC: Successfully imported new context.\n");
return 0;
out_err_free_key2:
diff --git a/net/sunrpc/auth_gss/gss_spkm3_mech.c b/net/sunrpc/auth_gss/gss_spkm3_mech.c
index 5bf11cc..3d0432a 100644
--- a/net/sunrpc/auth_gss/gss_spkm3_mech.c
+++ b/net/sunrpc/auth_gss/gss_spkm3_mech.c
@@ -201,7 +201,7 @@ gss_import_sec_context_spkm3(const void
ctx_id->internal_ctx_id = ctx;
- dprintk("Succesfully imported new spkm context.\n");
+ dprintk("Successfully imported new spkm context.\n");
return 0;
out_err_free_key2:
diff --git a/sound/core/seq/seq_memory.h b/sound/core/seq/seq_memory.h
index 39c60d9..63e9143 100644
--- a/sound/core/seq/seq_memory.h
+++ b/sound/core/seq/seq_memory.h
@@ -31,7 +31,7 @@ struct snd_seq_event_cell {
struct snd_seq_event_cell *next; /* next cell */
};
-/* design note: the pool is a contigious block of memory, if we dynamicly
+/* design note: the pool is a contiguous block of memory, if we dynamicly
want to add additional cells to the pool be better store this in another
pool as we need to know the base address of the pool when releasing
memory. */
diff --git a/sound/oss/sb_ess.c b/sound/oss/sb_ess.c
index fae05fe..180e95c 100644
--- a/sound/oss/sb_ess.c
+++ b/sound/oss/sb_ess.c
@@ -97,19 +97,19 @@ #undef FKS_TEST
*
* The documentation is an adventure: it's close but not fully accurate. I
* found out that after a reset some registers are *NOT* reset, though the
- * docs say the would be. Interresting ones are 0x7f, 0x7d and 0x7a. They are
- * related to the Audio 2 channel. I also was suprised about the consequenses
+ * docs say the would be. Interesting ones are 0x7f, 0x7d and 0x7a. They are
+ * related to the Audio 2 channel. I also was surprised about the consequences
* of writing 0x00 to 0x7f (which should be done by reset): The ES1887 moves
* into ES1888 mode. This means that it claims IRQ 11, which happens to be my
* ISDN adapter. Needless to say it no longer worked. I now understand why
* after rebooting 0x7f already was 0x05, the value of my choice: the BIOS
* did it.
*
- * Oh, and this is another trap: in ES1887 docs mixer register 0x70 is decribed
- * as if it's exactly the same as register 0xa1. This is *NOT* true. The
- * description of 0x70 in ES1869 docs is accurate however.
+ * Oh, and this is another trap: in ES1887 docs mixer register 0x70 is
+ * described as if it's exactly the same as register 0xa1. This is *NOT* true.
+ * The description of 0x70 in ES1869 docs is accurate however.
* Well, the assumption about ES1869 was wrong: register 0x70 is very much
- * like register 0xa1, except that bit 7 is allways 1, whatever you want
+ * like register 0xa1, except that bit 7 is always 1, whatever you want
* it to be.
*
* When using audio 2 mixer register 0x72 seems te be meaningless. Only 0xa2
@@ -117,10 +117,10 @@ #undef FKS_TEST
*
* Software reset not being able to reset all registers is great! Especially
* the fact that register 0x78 isn't reset is great when you wanna change back
- * to single dma operation (simplex): audio 2 is still operation, and uses the
- * same dma as audio 1: your ess changes into a funny echo machine.
+ * to single dma operation (simplex): audio 2 is still operational, and uses
+ * the same dma as audio 1: your ess changes into a funny echo machine.
*
- * Received the new that ES1688 is detected as a ES1788. Did some thinking:
+ * Received the news that ES1688 is detected as a ES1788. Did some thinking:
* the ES1887 detection scheme suggests in step 2 to try if bit 3 of register
* 0x64 can be changed. This is inaccurate, first I inverted the * check: "If
* can be modified, it's a 1688", which lead to a correct detection
@@ -135,7 +135,7 @@ #undef FKS_TEST
* About recognition of ESS chips
*
* The distinction of ES688, ES1688, ES1788, ES1887 and ES1888 is described in
- * a (preliminary ??) datasheet on ES1887. It's aim is to identify ES1887, but
+ * a (preliminary ??) datasheet on ES1887. Its aim is to identify ES1887, but
* during detection the text claims that "this chip may be ..." when a step
* fails. This scheme is used to distinct between the above chips.
* It appears however that some PnP chips like ES1868 are recognized as ES1788
@@ -156,9 +156,9 @@ #undef FKS_TEST
*
* The existing ES1688 support didn't take care of the ES1688+ recording
* levels very well. Whenever a device was selected (recmask) for recording
- * it's recording level was loud, and it couldn't be changed. The fact that
+ * its recording level was loud, and it couldn't be changed. The fact that
* internal register 0xb4 could take care of RECLEV, didn't work meaning until
- * it's value was restored every time the chip was reset; this reset the
+ * its value was restored every time the chip was reset; this reset the
* value of 0xb4 too. I guess that's what 4front also had (have?) trouble with.
*
* About ES1887 support:
@@ -169,9 +169,9 @@ #undef FKS_TEST
* the latter case the recording volumes are 0.
* Now recording levels of inputs can be controlled, by changing the playback
* levels. Futhermore several devices can be recorded together (which is not
- * possible with the ES1688.
+ * possible with the ES1688).
* Besides the separate recording level control for each input, the common
- * recordig level can also be controlled by RECLEV as described above.
+ * recording level can also be controlled by RECLEV as described above.
*
* Not only ES1887 have this recording mixer. I know the following from the
* documentation:
diff --git a/sound/pci/cs5535audio/cs5535audio_pcm.c b/sound/pci/cs5535audio/cs5535audio_pcm.c
index f0a4869..5450a9e 100644
--- a/sound/pci/cs5535audio/cs5535audio_pcm.c
+++ b/sound/pci/cs5535audio/cs5535audio_pcm.c
@@ -143,7 +143,7 @@ static int cs5535audio_build_dma_packets
if (dma->periods == periods && dma->period_bytes == period_bytes)
return 0;
- /* the u32 cast is okay because in snd*create we succesfully told
+ /* the u32 cast is okay because in snd*create we successfully told
pci alloc that we're only 32 bit capable so the uppper will be 0 */
addr = (u32) substream->runtime->dma_addr;
desc_addr = (u32) dma->desc_buf.addr;
^ permalink raw reply related [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-04-02 14:15 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-04-02 14:15 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Adrian Bunk:
help text: SOFTWARE_SUSPEND doesn't need ACPI
fix a typo in the AIC7XXX_DEBUG_MASK help text
fix the email address of Wendy Xiong
typos: s/ducument/document/
Anders Larsen:
MTD: remove obsolete Kconfig options
Cal Peake:
BFP->BPF in Documentation/networking/tuntap.txt
Eric Sesterhenn:
BUG_ON() Conversion in md/dm-target.c
BUG_ON() Conversion in md/raid1.c
BUG_ON() Conversion in fs/direct-io.c
BUG_ON() Conversion in fs/exec.c
BUG_ON() Conversion in fs/hfsplus/
BUG_ON() Conversion in fs/jffs2/
BUG_ON() Conversion in fs/smbfs/
BUG_ON() Conversion in fs/sysfs/
BUG_ON() Conversion in ipc/util.c
BUG_ON() Conversion in kernel/printk.c
BUG_ON() Conversion in mm/mmap.c
BUG_ON() Conversion in mm/swap_state.c
BUG_ON() Conversion in mm/vmalloc.c
BUG_ON() Conversion in drivers/s390/block/dasd_erp.c
BUG_ON() Conversion in drivers/s390/char/tape_block.c
BUG_ON() Conversion in md/raid5.c
BUG_ON() Conversion in md/raid6main.c
BUG_ON() Conversion in md/raid10.c
BUG_ON() Conversion in fs/dquot.c
BUG_ON() Conversion in fs/fcntl.c
BUG_ON() Conversion in fs/inode.c
BUG_ON() Conversion in fs/sysv/
BUG_ON() Conversion in fs/udf/
BUG_ON() Conversion in fs/freevxfs/
BUG_ON() Conversion in ipc/shm.c
BUG_ON() Conversion in kernel/ptrace.c
BUG_ON() Conversion in kernel/signal.c
BUG_ON() Conversion in kernel/signal.c
BUG_ON() Conversion in mm/highmem.c
BUG_ON() Conversion in mm/slab.c
BUG_ON() Conversion in drivers/s390/net/lcs.c
BUG_ON() Conversion in drivers/net/
Horms:
Documentation: Reorder documentation of nomca and nomce
Documentation: Make fujitsu/frv/kernel-ABI.txt 80 columns wide
kexec: grammar fix for crash_save_this_cpu()
Kalin KOZHUHAROV:
Fix comments: s/granuality/granularity/
Martin Waitz:
Documentation: fix minor kernel-doc warnings
Michael Hayes:
Fix minor documentation typo
Stefan Richter:
Doc/kernel-parameters.txt: delete false version information and history
Doc/kernel-parameters.txt: mention modinfo and sysfs
Doc/kernel-parameters.txt: slightly reword sentence about restrictions
Uwe Zeisberger:
fix typo "Suposse" -> "Suppose"
Documentation/DocBook/Makefile | 2
Documentation/DocBook/kernel-api.tmpl | 1
Documentation/acpi-hotkey.txt | 2
Documentation/fujitsu/frv/kernel-ABI.txt | 196 +++++++++++++----------
Documentation/kernel-parameters.txt | 34 +--
Documentation/networking/packet_mmap.txt | 2
Documentation/networking/tuntap.txt | 2
arch/i386/kernel/crash.c | 2
block/ll_rw_blk.c | 2
drivers/md/dm-target.c | 3
drivers/md/raid1.c | 6
drivers/md/raid10.c | 6
drivers/md/raid5.c | 34 +--
drivers/md/raid6main.c | 29 +--
drivers/mtd/chips/Kconfig | 21 --
drivers/net/8139cp.c | 12 -
drivers/net/arcnet/arcnet.c | 3
drivers/net/b44.c | 3
drivers/net/chelsio/sge.c | 3
drivers/net/e1000/e1000_main.c | 3
drivers/net/eql.c | 3
drivers/net/irda/sa1100_ir.c | 3
drivers/net/ne2k-pci.c | 4
drivers/net/ns83820.c | 3
drivers/net/starfire.c | 3
drivers/net/tg3.c | 15 -
drivers/net/tokenring/abyss.c | 3
drivers/net/tokenring/madgemc.c | 3
drivers/net/wireless/ipw2200.c | 9 -
drivers/net/yellowfin.c | 3
drivers/s390/block/dasd_erp.c | 8
drivers/s390/char/sclp_rw.c | 2
drivers/s390/char/tape_block.c | 13 -
drivers/s390/net/lcs.c | 13 -
drivers/scsi/aic7xxx/Kconfig.aic7xxx | 2
drivers/serial/jsm/jsm.h | 2
drivers/serial/jsm/jsm_driver.c | 2
drivers/serial/jsm/jsm_neo.c | 2
fs/direct-io.c | 3
fs/dquot.c | 6
fs/exec.c | 2
fs/fcntl.c | 3
fs/freevxfs/vxfs_olt.c | 9 -
fs/hfsplus/bnode.c | 6
fs/hfsplus/btree.c | 3
fs/inode.c | 15 -
fs/jffs2/background.c | 3
fs/smbfs/file.c | 6
fs/sysfs/dir.c | 2
fs/sysfs/inode.c | 3
fs/sysv/dir.c | 6
fs/udf/inode.c | 6
include/linux/fs.h | 2
include/linux/hrtimer.h | 2
ipc/shm.c | 15 -
ipc/util.c | 6
kernel/power/Kconfig | 2
kernel/printk.c | 6
kernel/ptrace.c | 3
kernel/signal.c | 6
kernel/time.c | 8
kernel/timer.c | 3
mm/highmem.c | 15 -
mm/mmap.c | 9 -
mm/page-writeback.c | 2
mm/slab.c | 18 --
mm/swap_state.c | 3
mm/vmalloc.c | 3
68 files changed, 264 insertions(+), 371 deletions(-)
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 7d87dd7..5a2882d 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -2,7 +2,7 @@
# This makefile is used to generate the kernel documentation,
# primarily based on in-line comments in various source files.
# See Documentation/kernel-doc-nano-HOWTO.txt for instruction in how
-# to ducument the SRC - and how to read it.
+# to document the SRC - and how to read it.
# To add a new book the only step required is to add the book to the
# list of DOCBOOKS.
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 8c9c670..ca02e04 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -322,7 +322,6 @@ X!Earch/i386/kernel/mca.c
<chapter id="sysfs">
<title>The Filesystem for Exporting Kernel Objects</title>
!Efs/sysfs/file.c
-!Efs/sysfs/dir.c
!Efs/sysfs/symlink.c
!Efs/sysfs/bin.c
</chapter>
diff --git a/Documentation/acpi-hotkey.txt b/Documentation/acpi-hotkey.txt
index 744f1ae..38040fa 100644
--- a/Documentation/acpi-hotkey.txt
+++ b/Documentation/acpi-hotkey.txt
@@ -30,7 +30,7 @@ specific hotkey(event))
echo "event_num:event_type:event_argument" >
/proc/acpi/hotkey/action.
The result of the execution of this aml method is
-attached to /proc/acpi/hotkey/poll_method, which is dnyamically
+attached to /proc/acpi/hotkey/poll_method, which is dynamically
created. Please use command "cat /proc/acpi/hotkey/polling_method"
to retrieve it.
diff --git a/Documentation/fujitsu/frv/kernel-ABI.txt b/Documentation/fujitsu/frv/kernel-ABI.txt
index 0ed9b0a..8b0a5fc 100644
--- a/Documentation/fujitsu/frv/kernel-ABI.txt
+++ b/Documentation/fujitsu/frv/kernel-ABI.txt
@@ -1,17 +1,19 @@
- =================================
- INTERNAL KERNEL ABI FOR FR-V ARCH
- =================================
-
-The internal FRV kernel ABI is not quite the same as the userspace ABI. A number of the registers
-are used for special purposed, and the ABI is not consistent between modules vs core, and MMU vs
-no-MMU.
-
-This partly stems from the fact that FRV CPUs do not have a separate supervisor stack pointer, and
-most of them do not have any scratch registers, thus requiring at least one general purpose
-register to be clobbered in such an event. Also, within the kernel core, it is possible to simply
-jump or call directly between functions using a relative offset. This cannot be extended to modules
-for the displacement is likely to be too far. Thus in modules the address of a function to call
-must be calculated in a register and then used, requiring two extra instructions.
+ =================================
+ INTERNAL KERNEL ABI FOR FR-V ARCH
+ =================================
+
+The internal FRV kernel ABI is not quite the same as the userspace ABI. A
+number of the registers are used for special purposed, and the ABI is not
+consistent between modules vs core, and MMU vs no-MMU.
+
+This partly stems from the fact that FRV CPUs do not have a separate
+supervisor stack pointer, and most of them do not have any scratch
+registers, thus requiring at least one general purpose register to be
+clobbered in such an event. Also, within the kernel core, it is possible to
+simply jump or call directly between functions using a relative offset.
+This cannot be extended to modules for the displacement is likely to be too
+far. Thus in modules the address of a function to call must be calculated
+in a register and then used, requiring two extra instructions.
This document has the following sections:
@@ -39,7 +41,8 @@ When a system call is made, the followin
CPU OPERATING MODES
===================
-The FR-V CPU has three basic operating modes. In order of increasing capability:
+The FR-V CPU has three basic operating modes. In order of increasing
+capability:
(1) User mode.
@@ -47,42 +50,46 @@ The FR-V CPU has three basic operating m
(2) Kernel mode.
- Normal kernel mode. There are many additional control registers available that may be
- accessed in this mode, in addition to all the stuff available to user mode. This has two
- submodes:
+ Normal kernel mode. There are many additional control registers
+ available that may be accessed in this mode, in addition to all the
+ stuff available to user mode. This has two submodes:
(a) Exceptions enabled (PSR.T == 1).
- Exceptions will invoke the appropriate normal kernel mode handler. On entry to the
- handler, the PSR.T bit will be cleared.
+ Exceptions will invoke the appropriate normal kernel mode
+ handler. On entry to the handler, the PSR.T bit will be cleared.
(b) Exceptions disabled (PSR.T == 0).
- No exceptions or interrupts may happen. Any mandatory exceptions will cause the CPU to
- halt unless the CPU is told to jump into debug mode instead.
+ No exceptions or interrupts may happen. Any mandatory exceptions
+ will cause the CPU to halt unless the CPU is told to jump into
+ debug mode instead.
(3) Debug mode.
- No exceptions may happen in this mode. Memory protection and management exceptions will be
- flagged for later consideration, but the exception handler won't be invoked. Debugging traps
- such as hardware breakpoints and watchpoints will be ignored. This mode is entered only by
- debugging events obtained from the other two modes.
+ No exceptions may happen in this mode. Memory protection and
+ management exceptions will be flagged for later consideration, but
+ the exception handler won't be invoked. Debugging traps such as
+ hardware breakpoints and watchpoints will be ignored. This mode is
+ entered only by debugging events obtained from the other two modes.
- All kernel mode registers may be accessed, plus a few extra debugging specific registers.
+ All kernel mode registers may be accessed, plus a few extra debugging
+ specific registers.
=================================
INTERNAL KERNEL-MODE REGISTER ABI
=================================
-There are a number of permanent register assignments that are set up by entry.S in the exception
-prologue. Note that there is a complete set of exception prologues for each of user->kernel
-transition and kernel->kernel transition. There are also user->debug and kernel->debug mode
-transition prologues.
+There are a number of permanent register assignments that are set up by
+entry.S in the exception prologue. Note that there is a complete set of
+exception prologues for each of user->kernel transition and kernel->kernel
+transition. There are also user->debug and kernel->debug mode transition
+prologues.
REGISTER FLAVOUR USE
- =============== ======= ====================================================
+ =============== ======= ==============================================
GR1 Supervisor stack pointer
GR15 Current thread info pointer
GR16 GP-Rel base register for small data
@@ -92,10 +99,12 @@ transition prologues.
GR31 NOMMU Destroyed by debug mode entry
GR31 MMU Destroyed by TLB miss kernel mode entry
CCR.ICC2 Virtual interrupt disablement tracking
- CCCR.CC3 Cleared by exception prologue (atomic op emulation)
+ CCCR.CC3 Cleared by exception prologue
+ (atomic op emulation)
SCR0 MMU See mmu-layout.txt.
SCR1 MMU See mmu-layout.txt.
- SCR2 MMU Save for EAR0 (destroyed by icache insns in debug mode)
+ SCR2 MMU Save for EAR0 (destroyed by icache insns
+ in debug mode)
SCR3 MMU Save for GR31 during debug exceptions
DAMR/IAMR NOMMU Fixed memory protection layout.
DAMR/IAMR MMU See mmu-layout.txt.
@@ -104,18 +113,21 @@ transition prologues.
Certain registers are also used or modified across function calls:
REGISTER CALL RETURN
- =============== =============================== ===============================
+ =============== =============================== ======================
GR0 Fixed Zero -
GR2 Function call frame pointer
GR3 Special Preserved
GR3-GR7 - Clobbered
- GR8 Function call arg #1 Return value (or clobbered)
- GR9 Function call arg #2 Return value MSW (or clobbered)
+ GR8 Function call arg #1 Return value
+ (or clobbered)
+ GR9 Function call arg #2 Return value MSW
+ (or clobbered)
GR10-GR13 Function call arg #3-#6 Clobbered
GR14 - Clobbered
GR15-GR16 Special Preserved
GR17-GR27 - Preserved
- GR28-GR31 Special Only accessed explicitly
+ GR28-GR31 Special Only accessed
+ explicitly
LR Return address after CALL Clobbered
CCR/CCCR - Mostly Clobbered
@@ -124,46 +136,53 @@ Certain registers are also used or modif
INTERNAL DEBUG-MODE REGISTER ABI
================================
-This is the same as the kernel-mode register ABI for functions calls. The difference is that in
-debug-mode there's a different stack and a different exception frame. Almost all the global
-registers from kernel-mode (including the stack pointer) may be changed.
+This is the same as the kernel-mode register ABI for functions calls. The
+difference is that in debug-mode there's a different stack and a different
+exception frame. Almost all the global registers from kernel-mode
+(including the stack pointer) may be changed.
REGISTER FLAVOUR USE
- =============== ======= ====================================================
+ =============== ======= ==============================================
GR1 Debug stack pointer
GR16 GP-Rel base register for small data
- GR31 Current debug exception frame pointer (__debug_frame)
+ GR31 Current debug exception frame pointer
+ (__debug_frame)
SCR3 MMU Saved value of GR31
-Note that debug mode is able to interfere with the kernel's emulated atomic ops, so it must be
-exceedingly careful not to do any that would interact with the main kernel in this regard. Hence
-the debug mode code (gdbstub) is almost completely self-contained. The only external code used is
-the sprintf family of functions.
-
-Futhermore, break.S is so complicated because single-step mode does not switch off on entry to an
-exception. That means unless manually disabled, single-stepping will blithely go on stepping into
-things like interrupts. See gdbstub.txt for more information.
+Note that debug mode is able to interfere with the kernel's emulated atomic
+ops, so it must be exceedingly careful not to do any that would interact
+with the main kernel in this regard. Hence the debug mode code (gdbstub) is
+almost completely self-contained. The only external code used is the
+sprintf family of functions.
+
+Futhermore, break.S is so complicated because single-step mode does not
+switch off on entry to an exception. That means unless manually disabled,
+single-stepping will blithely go on stepping into things like interrupts.
+See gdbstub.txt for more information.
==========================
VIRTUAL INTERRUPT HANDLING
==========================
-Because accesses to the PSR is so slow, and to disable interrupts we have to access it twice (once
-to read and once to write), we don't actually disable interrupts at all if we don't have to. What
-we do instead is use the ICC2 condition code flags to note virtual disablement, such that if we
-then do take an interrupt, we note the flag, really disable interrupts, set another flag and resume
-execution at the point the interrupt happened. Setting condition flags as a side effect of an
-arithmetic or logical instruction is really fast. This use of the ICC2 only occurs within the
+Because accesses to the PSR is so slow, and to disable interrupts we have
+to access it twice (once to read and once to write), we don't actually
+disable interrupts at all if we don't have to. What we do instead is use
+the ICC2 condition code flags to note virtual disablement, such that if we
+then do take an interrupt, we note the flag, really disable interrupts, set
+another flag and resume execution at the point the interrupt happened.
+Setting condition flags as a side effect of an arithmetic or logical
+instruction is really fast. This use of the ICC2 only occurs within the
kernel - it does not affect userspace.
The flags we use are:
(*) CCR.ICC2.Z [Zero flag]
- Set to virtually disable interrupts, clear when interrupts are virtually enabled. Can be
- modified by logical instructions without affecting the Carry flag.
+ Set to virtually disable interrupts, clear when interrupts are
+ virtually enabled. Can be modified by logical instructions without
+ affecting the Carry flag.
(*) CCR.ICC2.C [Carry flag]
@@ -176,8 +195,9 @@ What happens is this:
ICC2.Z is 0, ICC2.C is 1.
- (2) An interrupt occurs. The exception prologue examines ICC2.Z and determines that nothing needs
- doing. This is done simply with an unlikely BEQ instruction.
+ (2) An interrupt occurs. The exception prologue examines ICC2.Z and
+ determines that nothing needs doing. This is done simply with an
+ unlikely BEQ instruction.
(3) The interrupts are disabled (local_irq_disable)
@@ -187,48 +207,56 @@ What happens is this:
ICC2.Z would be set to 0.
- A TIHI #2 instruction (trap #2 if condition HI - Z==0 && C==0) would be used to trap if
- interrupts were now virtually enabled, but physically disabled - which they're not, so the
- trap isn't taken. The kernel would then be back to state (1).
-
- (5) An interrupt occurs. The exception prologue examines ICC2.Z and determines that the interrupt
- shouldn't actually have happened. It jumps aside, and there disabled interrupts by setting
- PSR.PIL to 14 and then it clears ICC2.C.
+ A TIHI #2 instruction (trap #2 if condition HI - Z==0 && C==0) would
+ be used to trap if interrupts were now virtually enabled, but
+ physically disabled - which they're not, so the trap isn't taken. The
+ kernel would then be back to state (1).
+
+ (5) An interrupt occurs. The exception prologue examines ICC2.Z and
+ determines that the interrupt shouldn't actually have happened. It
+ jumps aside, and there disabled interrupts by setting PSR.PIL to 14
+ and then it clears ICC2.C.
(6) If interrupts were then saved and disabled again (local_irq_save):
- ICC2.Z would be shifted into the save variable and masked off (giving a 1).
+ ICC2.Z would be shifted into the save variable and masked off
+ (giving a 1).
- ICC2.Z would then be set to 1 (thus unchanged), and ICC2.C would be unaffected (ie: 0).
+ ICC2.Z would then be set to 1 (thus unchanged), and ICC2.C would be
+ unaffected (ie: 0).
(7) If interrupts were then restored from state (6) (local_irq_restore):
- ICC2.Z would be set to indicate the result of XOR'ing the saved value (ie: 1) with 1, which
- gives a result of 0 - thus leaving ICC2.Z set.
+ ICC2.Z would be set to indicate the result of XOR'ing the saved
+ value (ie: 1) with 1, which gives a result of 0 - thus leaving
+ ICC2.Z set.
ICC2.C would remain unaffected (ie: 0).
- A TIHI #2 instruction would be used to again assay the current state, but this would do
- nothing as Z==1.
+ A TIHI #2 instruction would be used to again assay the current state,
+ but this would do nothing as Z==1.
(8) If interrupts were then enabled (local_irq_enable):
- ICC2.Z would be cleared. ICC2.C would be left unaffected. Both flags would now be 0.
+ ICC2.Z would be cleared. ICC2.C would be left unaffected. Both
+ flags would now be 0.
- A TIHI #2 instruction again issued to assay the current state would then trap as both Z==0
- [interrupts virtually enabled] and C==0 [interrupts really disabled] would then be true.
+ A TIHI #2 instruction again issued to assay the current state would
+ then trap as both Z==0 [interrupts virtually enabled] and C==0
+ [interrupts really disabled] would then be true.
- (9) The trap #2 handler would simply enable hardware interrupts (set PSR.PIL to 0), set ICC2.C to
- 1 and return.
+ (9) The trap #2 handler would simply enable hardware interrupts
+ (set PSR.PIL to 0), set ICC2.C to 1 and return.
(10) Immediately upon returning, the pending interrupt would be taken.
-(11) The interrupt handler would take the path of actually processing the interrupt (ICC2.Z is
- clear, BEQ fails as per step (2)).
+(11) The interrupt handler would take the path of actually processing the
+ interrupt (ICC2.Z is clear, BEQ fails as per step (2)).
-(12) The interrupt handler would then set ICC2.C to 1 since hardware interrupts are definitely
- enabled - or else the kernel wouldn't be here.
+(12) The interrupt handler would then set ICC2.C to 1 since hardware
+ interrupts are definitely enabled - or else the kernel wouldn't be here.
(13) On return from the interrupt handler, things would be back to state (1).
-This trap (#2) is only available in kernel mode. In user mode it will result in SIGILL.
+This trap (#2) is only available in kernel mode. In user mode it will
+result in SIGILL.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index f8cb55c..b3a6187 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1,4 +1,4 @@
-February 2003 Kernel Parameters v2.5.59
+ Kernel Parameters
~~~~~~~~~~~~~~~~~
The following is a consolidated list of the kernel parameters as implemented
@@ -17,9 +17,17 @@ are specified on the kernel command line
usbcore.blinkenlights=1
-The text in square brackets at the beginning of the description states the
-restrictions on the kernel for the said kernel parameter to be valid. The
-restrictions referred to are that the relevant option is valid if:
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+The parameters listed below are only valid if certain kernel build options were
+enabled and if respective hardware is present. The text in square brackets at
+the beginning of each description states the restrictions within which a
+parameter is applicable:
ACPI ACPI support is enabled.
ALSA ALSA sound support is enabled.
@@ -1046,10 +1054,10 @@ running once the system is up.
noltlbs [PPC] Do not use large page/tlb entries for kernel
lowmem mapping on PPC40x.
- nomce [IA-32] Machine Check Exception
-
nomca [IA-64] Disable machine check abort handling
+ nomce [IA-32] Machine Check Exception
+
noresidual [PPC] Don't use residual data on PReP machines.
noresume [SWSUSP] Disables resume and restores original swap
@@ -1682,20 +1690,6 @@ running once the system is up.
______________________________________________________________________
-Changelog:
-
-2000-06-?? Mr. Unknown
- The last known update (for 2.4.0) - the changelog was not kept before.
-
-2002-11-24 Petr Baudis <pasky@ucw.cz>
- Randy Dunlap <randy.dunlap@verizon.net>
- Update for 2.5.49, description for most of the options introduced,
- references to other documentation (C files, READMEs, ..), added S390,
- PPC, SPARC, MTD, ALSA and OSS category. Minor corrections and
- reformatting.
-
-2005-10-19 Randy Dunlap <rdunlap@xenotime.net>
- Lots of typos, whitespace, some reformatting.
TODO:
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index 4fc8e98..aaf99d5 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -254,7 +254,7 @@ and, the number of frames be
<block number> * <block size> / <frame size>
-Suposse the following parameters, which apply for 2.6 kernel and an
+Suppose the following parameters, which apply for 2.6 kernel and an
i386 architecture:
<size-max> = 131072 bytes
diff --git a/Documentation/networking/tuntap.txt b/Documentation/networking/tuntap.txt
index ec3d109..76750fb 100644
--- a/Documentation/networking/tuntap.txt
+++ b/Documentation/networking/tuntap.txt
@@ -138,7 +138,7 @@ This means that you have to read/write I
ethernet frames when using tap.
5. What is the difference between BPF and TUN/TAP driver?
-BFP is an advanced packet filter. It can be attached to existing
+BPF is an advanced packet filter. It can be attached to existing
network interface. It does not provide a virtual network interface.
A TUN/TAP driver does provide a virtual network interface and it is possible
to attach BPF to this interface.
diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c
index e3c5fca..2b0cfce 100644
--- a/arch/i386/kernel/crash.c
+++ b/arch/i386/kernel/crash.c
@@ -69,7 +69,7 @@ static void crash_save_this_cpu(struct p
* for the data I pass, and I need tags
* on the data to indicate what information I have
* squirrelled away. ELF notes happen to provide
- * all of that that no need to invent something new.
+ * all of that, so there is no need to invent something new.
*/
buf = (u32*)per_cpu_ptr(crash_notes, cpu);
if (!buf)
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 5b26af8..e112d1a 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -1740,7 +1740,7 @@ EXPORT_SYMBOL(blk_run_queue);
/**
* blk_cleanup_queue: - release a &request_queue_t when it is no longer needed
- * @q: the request queue to be released
+ * @kobj: the kobj belonging of the request queue to be released
*
* Description:
* blk_cleanup_queue is the pair to blk_init_queue() or
diff --git a/drivers/md/dm-target.c b/drivers/md/dm-target.c
index aecd9e0..64fd8e7 100644
--- a/drivers/md/dm-target.c
+++ b/drivers/md/dm-target.c
@@ -78,8 +78,7 @@ void dm_put_target_type(struct target_ty
if (--ti->use == 0)
module_put(ti->tt.module);
- if (ti->use < 0)
- BUG();
+ BUG_ON(ti->use < 0);
up_read(&_lock);
return;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 9b374c9..6081941 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1558,8 +1558,7 @@ static int init_resync(conf_t *conf)
int buffs;
buffs = RESYNC_WINDOW / RESYNC_BLOCK_SIZE;
- if (conf->r1buf_pool)
- BUG();
+ BUG_ON(conf->r1buf_pool);
conf->r1buf_pool = mempool_create(buffs, r1buf_pool_alloc, r1buf_pool_free,
conf->poolinfo);
if (!conf->r1buf_pool)
@@ -1732,8 +1731,7 @@ static sector_t sync_request(mddev_t *md
!conf->fullsync &&
!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
break;
- if (sync_blocks < (PAGE_SIZE>>9))
- BUG();
+ BUG_ON(sync_blocks < (PAGE_SIZE>>9));
if (len > (sync_blocks<<9))
len = sync_blocks<<9;
}
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index ab90a6d..617012b 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1117,8 +1117,7 @@ static int end_sync_read(struct bio *bio
for (i=0; i<conf->copies; i++)
if (r10_bio->devs[i].bio == bio)
break;
- if (i == conf->copies)
- BUG();
+ BUG_ON(i == conf->copies);
update_head_pos(i, r10_bio);
d = r10_bio->devs[i].devnum;
@@ -1518,8 +1517,7 @@ static int init_resync(conf_t *conf)
int buffs;
buffs = RESYNC_WINDOW / RESYNC_BLOCK_SIZE;
- if (conf->r10buf_pool)
- BUG();
+ BUG_ON(conf->r10buf_pool);
conf->r10buf_pool = mempool_create(buffs, r10buf_pool_alloc, r10buf_pool_free, conf);
if (!conf->r10buf_pool)
return -ENOMEM;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index dae740a..3184360 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -73,10 +73,8 @@ static void print_raid5_conf (raid5_conf
static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh)
{
if (atomic_dec_and_test(&sh->count)) {
- if (!list_empty(&sh->lru))
- BUG();
- if (atomic_read(&conf->active_stripes)==0)
- BUG();
+ BUG_ON(!list_empty(&sh->lru));
+ BUG_ON(atomic_read(&conf->active_stripes)==0);
if (test_bit(STRIPE_HANDLE, &sh->state)) {
if (test_bit(STRIPE_DELAYED, &sh->state))
list_add_tail(&sh->lru, &conf->delayed_list);
@@ -184,10 +182,8 @@ static void init_stripe(struct stripe_he
raid5_conf_t *conf = sh->raid_conf;
int i;
- if (atomic_read(&sh->count) != 0)
- BUG();
- if (test_bit(STRIPE_HANDLE, &sh->state))
- BUG();
+ BUG_ON(atomic_read(&sh->count) != 0);
+ BUG_ON(test_bit(STRIPE_HANDLE, &sh->state));
CHECK_DEVLOCK();
PRINTK("init_stripe called, stripe %llu\n",
@@ -269,8 +265,7 @@ static struct stripe_head *get_active_st
init_stripe(sh, sector, pd_idx, disks);
} else {
if (atomic_read(&sh->count)) {
- if (!list_empty(&sh->lru))
- BUG();
+ BUG_ON(!list_empty(&sh->lru));
} else {
if (!test_bit(STRIPE_HANDLE, &sh->state))
atomic_inc(&conf->active_stripes);
@@ -465,8 +460,7 @@ static int drop_one_stripe(raid5_conf_t
spin_unlock_irq(&conf->device_lock);
if (!sh)
return 0;
- if (atomic_read(&sh->count))
- BUG();
+ BUG_ON(atomic_read(&sh->count));
shrink_buffers(sh, conf->pool_size);
kmem_cache_free(conf->slab_cache, sh);
atomic_dec(&conf->active_stripes);
@@ -882,8 +876,7 @@ static void compute_parity(struct stripe
ptr[0] = page_address(sh->dev[pd_idx].page);
switch(method) {
case READ_MODIFY_WRITE:
- if (!test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags))
- BUG();
+ BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags));
for (i=disks ; i-- ;) {
if (i==pd_idx)
continue;
@@ -896,7 +889,7 @@ static void compute_parity(struct stripe
if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
wake_up(&conf->wait_for_overlap);
- if (sh->dev[i].written) BUG();
+ BUG_ON(sh->dev[i].written);
sh->dev[i].written = chosen;
check_xor();
}
@@ -912,7 +905,7 @@ static void compute_parity(struct stripe
if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
wake_up(&conf->wait_for_overlap);
- if (sh->dev[i].written) BUG();
+ BUG_ON(sh->dev[i].written);
sh->dev[i].written = chosen;
}
break;
@@ -995,8 +988,7 @@ static int add_stripe_bio(struct stripe_
if (*bip && (*bip)->bi_sector < bi->bi_sector + ((bi->bi_size)>>9))
goto overlap;
- if (*bip && bi->bi_next && (*bip) != bi->bi_next)
- BUG();
+ BUG_ON(*bip && bi->bi_next && (*bip) != bi->bi_next);
if (*bip)
bi->bi_next = *bip;
*bip = bi;
@@ -1430,8 +1422,7 @@ static void handle_stripe(struct stripe_
set_bit(STRIPE_HANDLE, &sh->state);
if (failed == 0) {
char *pagea;
- if (uptodate != disks)
- BUG();
+ BUG_ON(uptodate != disks);
compute_parity(sh, CHECK_PARITY);
uptodate--;
pagea = page_address(sh->dev[sh->pd_idx].page);
@@ -2096,8 +2087,7 @@ static void raid5d (mddev_t *mddev)
list_del_init(first);
atomic_inc(&sh->count);
- if (atomic_read(&sh->count)!= 1)
- BUG();
+ BUG_ON(atomic_read(&sh->count)!= 1);
spin_unlock_irq(&conf->device_lock);
handled++;
diff --git a/drivers/md/raid6main.c b/drivers/md/raid6main.c
index ab64b37..bc69355 100644
--- a/drivers/md/raid6main.c
+++ b/drivers/md/raid6main.c
@@ -91,10 +91,8 @@ static void print_raid6_conf (raid6_conf
static void __release_stripe(raid6_conf_t *conf, struct stripe_head *sh)
{
if (atomic_dec_and_test(&sh->count)) {
- if (!list_empty(&sh->lru))
- BUG();
- if (atomic_read(&conf->active_stripes)==0)
- BUG();
+ BUG_ON(!list_empty(&sh->lru));
+ BUG_ON(atomic_read(&conf->active_stripes)==0);
if (test_bit(STRIPE_HANDLE, &sh->state)) {
if (test_bit(STRIPE_DELAYED, &sh->state))
list_add_tail(&sh->lru, &conf->delayed_list);
@@ -202,10 +200,8 @@ static void init_stripe(struct stripe_he
raid6_conf_t *conf = sh->raid_conf;
int disks = conf->raid_disks, i;
- if (atomic_read(&sh->count) != 0)
- BUG();
- if (test_bit(STRIPE_HANDLE, &sh->state))
- BUG();
+ BUG_ON(atomic_read(&sh->count) != 0);
+ BUG_ON(test_bit(STRIPE_HANDLE, &sh->state));
CHECK_DEVLOCK();
PRINTK("init_stripe called, stripe %llu\n",
@@ -284,13 +280,11 @@ static struct stripe_head *get_active_st
init_stripe(sh, sector, pd_idx);
} else {
if (atomic_read(&sh->count)) {
- if (!list_empty(&sh->lru))
- BUG();
+ BUG_ON(!list_empty(&sh->lru));
} else {
if (!test_bit(STRIPE_HANDLE, &sh->state))
atomic_inc(&conf->active_stripes);
- if (list_empty(&sh->lru))
- BUG();
+ BUG_ON(list_empty(&sh->lru));
list_del_init(&sh->lru);
}
}
@@ -353,8 +347,7 @@ static int drop_one_stripe(raid6_conf_t
spin_unlock_irq(&conf->device_lock);
if (!sh)
return 0;
- if (atomic_read(&sh->count))
- BUG();
+ BUG_ON(atomic_read(&sh->count));
shrink_buffers(sh, conf->raid_disks);
kmem_cache_free(conf->slab_cache, sh);
atomic_dec(&conf->active_stripes);
@@ -780,7 +773,7 @@ static void compute_parity(struct stripe
if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
wake_up(&conf->wait_for_overlap);
- if (sh->dev[i].written) BUG();
+ BUG_ON(sh->dev[i].written);
sh->dev[i].written = chosen;
}
break;
@@ -970,8 +963,7 @@ static int add_stripe_bio(struct stripe_
if (*bip && (*bip)->bi_sector < bi->bi_sector + ((bi->bi_size)>>9))
goto overlap;
- if (*bip && bi->bi_next && (*bip) != bi->bi_next)
- BUG();
+ BUG_ON(*bip && bi->bi_next && (*bip) != bi->bi_next);
if (*bip)
bi->bi_next = *bip;
*bip = bi;
@@ -1906,8 +1898,7 @@ static void raid6d (mddev_t *mddev)
list_del_init(first);
atomic_inc(&sh->count);
- if (atomic_read(&sh->count)!= 1)
- BUG();
+ BUG_ON(atomic_read(&sh->count)!= 1);
spin_unlock_irq(&conf->device_lock);
handled++;
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 0f6bb2e..a7ec595 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -200,27 +200,6 @@ config MTD_CFI_AMDSTD
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
-config MTD_CFI_AMDSTD_RETRY
- int "Retry failed commands (erase/program)"
- depends on MTD_CFI_AMDSTD
- default "0"
- help
- Some chips, when attached to a shared bus, don't properly filter
- bus traffic that is destined to other devices. This broken
- behavior causes erase and program sequences to be aborted when
- the sequences are mixed with traffic for other devices.
-
- SST49LF040 (and related) chips are know to be broken.
-
-config MTD_CFI_AMDSTD_RETRY_MAX
- int "Max retries of failed commands (erase/program)"
- depends on MTD_CFI_AMDSTD_RETRY
- default "0"
- help
- If you have an SST49LF040 (or related chip) then this value should
- be set to at least 1. This can also be adjusted at driver load
- time with the retry_cmd_max module parameter.
-
config MTD_CFI_STAA
tristate "Support for ST (Advanced Architecture) flash chips"
depends on MTD_GEN_PROBE
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index ce99845..066e22b 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -539,8 +539,7 @@ rx_status_loop:
unsigned buflen;
skb = cp->rx_skb[rx_tail].skb;
- if (!skb)
- BUG();
+ BUG_ON(!skb);
desc = &cp->rx_ring[rx_tail];
status = le32_to_cpu(desc->opts1);
@@ -723,8 +722,7 @@ static void cp_tx (struct cp_private *cp
break;
skb = cp->tx_skb[tx_tail].skb;
- if (!skb)
- BUG();
+ BUG_ON(!skb);
pci_unmap_single(cp->pdev, cp->tx_skb[tx_tail].mapping,
cp->tx_skb[tx_tail].len, PCI_DMA_TODEVICE);
@@ -1550,8 +1548,7 @@ static void cp_get_ethtool_stats (struct
tmp_stats[i++] = le16_to_cpu(nic_stats->tx_abort);
tmp_stats[i++] = le16_to_cpu(nic_stats->tx_underrun);
tmp_stats[i++] = cp->cp_stats.rx_frags;
- if (i != CP_NUM_STATS)
- BUG();
+ BUG_ON(i != CP_NUM_STATS);
pci_free_consistent(cp->pdev, sizeof(*nic_stats), nic_stats, dma);
}
@@ -1856,8 +1853,7 @@ static void cp_remove_one (struct pci_de
struct net_device *dev = pci_get_drvdata(pdev);
struct cp_private *cp = netdev_priv(dev);
- if (!dev)
- BUG();
+ BUG_ON(!dev);
unregister_netdev(dev);
iounmap(cp->regs);
if (cp->wol_enabled) pci_set_power_state (pdev, PCI_D0);
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index 64e2caf..fabc060 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -765,8 +765,7 @@ irqreturn_t arcnet_interrupt(int irq, vo
BUGMSG(D_DURING, "in arcnet_interrupt\n");
lp = dev->priv;
- if (!lp)
- BUG();
+ BUG_ON(!lp);
spin_lock(&lp->lock);
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 15032f2..c4e12b5 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -608,8 +608,7 @@ static void b44_tx(struct b44 *bp)
struct ring_info *rp = &bp->tx_buffers[cons];
struct sk_buff *skb = rp->skb;
- if (unlikely(skb == NULL))
- BUG();
+ BUG_ON(skb == NULL);
pci_unmap_single(bp->pdev,
pci_unmap_addr(rp, mapping),
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 30ff8ea..4391bf4 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1093,8 +1093,7 @@ static int process_responses(struct adap
if (likely(e->DataValid)) {
struct freelQ *fl = &sge->freelQ[e->FreelistQid];
- if (unlikely(!e->Sop || !e->Eop))
- BUG();
+ BUG_ON(!e->Sop || !e->Eop);
if (unlikely(e->Offload))
unexpected_offload(adapter, fl);
else
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 49cd096..add8dc4 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3308,8 +3308,7 @@ e1000_clean(struct net_device *poll_dev,
while (poll_dev != &adapter->polling_netdev[i]) {
i++;
- if (unlikely(i == adapter->num_rx_queues))
- BUG();
+ BUG_ON(i == adapter->num_rx_queues);
}
if (likely(adapter->num_tx_queues == 1)) {
diff --git a/drivers/net/eql.c b/drivers/net/eql.c
index aa15691..815436c 100644
--- a/drivers/net/eql.c
+++ b/drivers/net/eql.c
@@ -203,8 +203,7 @@ static int eql_open(struct net_device *d
printk(KERN_INFO "%s: remember to turn off Van-Jacobson compression on "
"your slave devices.\n", dev->name);
- if (!list_empty(&eql->queue.all_slaves))
- BUG();
+ BUG_ON(!list_empty(&eql->queue.all_slaves));
eql->min_slaves = 1;
eql->max_slaves = EQL_DEFAULT_MAX_SLAVES; /* 4 usually... */
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 63d38fb..f530686 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -695,8 +695,7 @@ static int sa1100_irda_hard_xmit(struct
/*
* We must not be transmitting...
*/
- if (si->txskb)
- BUG();
+ BUG_ON(si->txskb);
netif_stop_queue(dev);
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index d11821d..ced9fdb 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -645,9 +645,7 @@ static void __devexit ne2k_pci_remove_on
{
struct net_device *dev = pci_get_drvdata(pdev);
- if (!dev)
- BUG();
-
+ BUG_ON(!dev);
unregister_netdev(dev);
release_region(dev->base_addr, NE_IO_EXTENT);
free_netdev(dev);
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 8e9b1a5..706aed7 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -568,8 +568,7 @@ static inline int ns83820_add_rx_skb(str
#endif
sg = dev->rx_info.descs + (next_empty * DESC_SIZE);
- if (unlikely(NULL != dev->rx_info.skbs[next_empty]))
- BUG();
+ BUG_ON(NULL != dev->rx_info.skbs[next_empty]);
dev->rx_info.skbs[next_empty] = skb;
dev->rx_info.next_empty = (next_empty + 1) % NR_RX_DESC;
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 35b1805..45ad036 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -2122,8 +2122,7 @@ static void __devexit starfire_remove_on
struct net_device *dev = pci_get_drvdata(pdev);
struct netdev_private *np = netdev_priv(dev);
- if (!dev)
- BUG();
+ BUG_ON(!dev);
unregister_netdev(dev);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 964c096..46f55fb 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -2966,9 +2966,7 @@ static void tg3_tx(struct tg3 *tp)
struct sk_buff *skb = ri->skb;
int i;
- if (unlikely(skb == NULL))
- BUG();
-
+ BUG_ON(skb == NULL);
pci_unmap_single(tp->pdev,
pci_unmap_addr(ri, mapping),
skb_headlen(skb),
@@ -2979,12 +2977,10 @@ static void tg3_tx(struct tg3 *tp)
sw_idx = NEXT_TX(sw_idx);
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- if (unlikely(sw_idx == hw_idx))
- BUG();
+ BUG_ON(sw_idx == hw_idx);
ri = &tp->tx_buffers[sw_idx];
- if (unlikely(ri->skb != NULL))
- BUG();
+ BUG_ON(ri->skb != NULL);
pci_unmap_page(tp->pdev,
pci_unmap_addr(ri, mapping),
@@ -4935,9 +4931,8 @@ static int tg3_halt_cpu(struct tg3 *tp,
{
int i;
- if (offset == TX_CPU_BASE &&
- (tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
- BUG();
+ BUG_ON(offset == TX_CPU_BASE &&
+ (tp->tg3_flags2 & TG3_FLG2_5705_PLUS));
if (offset == RX_CPU_BASE) {
for (i = 0; i < 10000; i++) {
diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c
index 9345e68..649d8ea 100644
--- a/drivers/net/tokenring/abyss.c
+++ b/drivers/net/tokenring/abyss.c
@@ -438,8 +438,7 @@ static void __devexit abyss_detach (stru
{
struct net_device *dev = pci_get_drvdata(pdev);
- if (!dev)
- BUG();
+ BUG_ON(!dev);
unregister_netdev(dev);
release_region(dev->base_addr-0x10, ABYSS_IO_EXTENT);
free_irq(dev->irq, dev);
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
index 3a25d19..19e6f4d 100644
--- a/drivers/net/tokenring/madgemc.c
+++ b/drivers/net/tokenring/madgemc.c
@@ -735,8 +735,7 @@ static int __devexit madgemc_remove(stru
struct net_local *tp;
struct card_info *card;
- if (!dev)
- BUG();
+ BUG_ON(!dev);
tp = dev->priv;
card = tp->tmspriv;
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 9dce522..bca89cf 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -5573,8 +5573,7 @@ static void ipw_adhoc_create(struct ipw_
case IEEE80211_52GHZ_BAND:
network->mode = IEEE_A;
i = ieee80211_channel_to_index(priv->ieee, priv->channel);
- if (i == -1)
- BUG();
+ BUG_ON(i == -1);
if (geo->a[i].flags & IEEE80211_CH_PASSIVE_ONLY) {
IPW_WARNING("Overriding invalid channel\n");
priv->channel = geo->a[0].channel;
@@ -5587,8 +5586,7 @@ static void ipw_adhoc_create(struct ipw_
else
network->mode = IEEE_B;
i = ieee80211_channel_to_index(priv->ieee, priv->channel);
- if (i == -1)
- BUG();
+ BUG_ON(i == -1);
if (geo->bg[i].flags & IEEE80211_CH_PASSIVE_ONLY) {
IPW_WARNING("Overriding invalid channel\n");
priv->channel = geo->bg[0].channel;
@@ -6715,8 +6713,7 @@ static int ipw_qos_association(struct ip
switch (priv->ieee->iw_mode) {
case IW_MODE_ADHOC:
- if (!(network->capability & WLAN_CAPABILITY_IBSS))
- BUG();
+ BUG_ON(!(network->capability & WLAN_CAPABILITY_IBSS));
qos_data = &ibss_data;
break;
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 75d56bf..fd0f43b 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -1441,8 +1441,7 @@ static void __devexit yellowfin_remove_o
struct net_device *dev = pci_get_drvdata(pdev);
struct yellowfin_private *np;
- if (!dev)
- BUG();
+ BUG_ON(!dev);
np = netdev_priv(dev);
pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
diff --git a/drivers/s390/block/dasd_erp.c b/drivers/s390/block/dasd_erp.c
index 8fd71ab..b842377 100644
--- a/drivers/s390/block/dasd_erp.c
+++ b/drivers/s390/block/dasd_erp.c
@@ -32,9 +32,8 @@ dasd_alloc_erp_request(char *magic, int
int size;
/* Sanity checks */
- if ( magic == NULL || datasize > PAGE_SIZE ||
- (cplength*sizeof(struct ccw1)) > PAGE_SIZE)
- BUG();
+ BUG_ON( magic == NULL || datasize > PAGE_SIZE ||
+ (cplength*sizeof(struct ccw1)) > PAGE_SIZE);
size = (sizeof(struct dasd_ccw_req) + 7L) & -8L;
if (cplength > 0)
@@ -125,8 +124,7 @@ dasd_default_erp_postaction(struct dasd_
struct dasd_device *device;
int success;
- if (cqr->refers == NULL || cqr->function == NULL)
- BUG();
+ BUG_ON(cqr->refers == NULL || cqr->function == NULL);
device = cqr->device;
success = cqr->status == DASD_CQR_DONE;
diff --git a/drivers/s390/char/sclp_rw.c b/drivers/s390/char/sclp_rw.c
index ac10dfb..91e93c7 100644
--- a/drivers/s390/char/sclp_rw.c
+++ b/drivers/s390/char/sclp_rw.c
@@ -24,7 +24,7 @@
/*
* The room for the SCCB (only for writing) is not equal to a pages size
- * (as it is specified as the maximum size in the the SCLP ducumentation)
+ * (as it is specified as the maximum size in the the SCLP documentation)
* because of the additional data structure described above.
*/
#define MAX_SCCB_ROOM (PAGE_SIZE - sizeof(struct sclp_buffer))
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 5ced272..5c65cf3 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -198,9 +198,7 @@ tapeblock_request_fn(request_queue_t *qu
device = (struct tape_device *) queue->queuedata;
DBF_LH(6, "tapeblock_request_fn(device=%p)\n", device);
- if (device == NULL)
- BUG();
-
+ BUG_ON(device == NULL);
tapeblock_trigger_requeue(device);
}
@@ -307,8 +305,7 @@ tapeblock_revalidate_disk(struct gendisk
int rc;
device = (struct tape_device *) disk->private_data;
- if (!device)
- BUG();
+ BUG_ON(!device);
if (!device->blk_data.medium_changed)
return 0;
@@ -440,11 +437,9 @@ tapeblock_ioctl(
rc = 0;
disk = inode->i_bdev->bd_disk;
- if (!disk)
- BUG();
+ BUG_ON(!disk);
device = disk->private_data;
- if (!device)
- BUG();
+ BUG_ON(!device);
minor = iminor(inode);
DBF_LH(6, "tapeblock_ioctl(0x%0x)\n", command);
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index edcf05d..5d6b7a5 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -675,9 +675,8 @@ lcs_ready_buffer(struct lcs_channel *cha
int index, rc;
LCS_DBF_TEXT(5, trace, "rdybuff");
- if (buffer->state != BUF_STATE_LOCKED &&
- buffer->state != BUF_STATE_PROCESSED)
- BUG();
+ BUG_ON(buffer->state != BUF_STATE_LOCKED &&
+ buffer->state != BUF_STATE_PROCESSED);
spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
buffer->state = BUF_STATE_READY;
index = buffer - channel->iob;
@@ -701,8 +700,7 @@ __lcs_processed_buffer(struct lcs_channe
int index, prev, next;
LCS_DBF_TEXT(5, trace, "prcsbuff");
- if (buffer->state != BUF_STATE_READY)
- BUG();
+ BUG_ON(buffer->state != BUF_STATE_READY);
buffer->state = BUF_STATE_PROCESSED;
index = buffer - channel->iob;
prev = (index - 1) & (LCS_NUM_BUFFS - 1);
@@ -734,9 +732,8 @@ lcs_release_buffer(struct lcs_channel *c
unsigned long flags;
LCS_DBF_TEXT(5, trace, "relbuff");
- if (buffer->state != BUF_STATE_LOCKED &&
- buffer->state != BUF_STATE_PROCESSED)
- BUG();
+ BUG_ON(buffer->state != BUF_STATE_LOCKED &&
+ buffer->state != BUF_STATE_PROCESSED);
spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
buffer->state = BUF_STATE_EMPTY;
spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 6c2c395..5517da5 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -86,7 +86,7 @@ config AIC7XXX_DEBUG_MASK
default "0"
help
Bit mask of debug options that is only valid if the
- CONFIG_AIC7XXX_DEBUG_ENBLE option is enabled. The bits in this mask
+ CONFIG_AIC7XXX_DEBUG_ENABLE option is enabled. The bits in this mask
are defined in the drivers/scsi/aic7xxx/aic7xxx.h - search for the
variable ahc_debug in that file to find them.
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index dfc1e86..043f50b 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -20,7 +20,7 @@
*
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
- * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ * Wendy Xiong <wendyx@us.ibm.com>
*
***********************************************************************/
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index b1b66e7..b3e1f71 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -20,7 +20,7 @@
*
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
- * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ * Wendy Xiong <wendyx@us.ibm.com>
*
*
***********************************************************************/
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index 87e4e2c..a5fc589 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -20,7 +20,7 @@
*
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
- * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ * Wendy Xiong <wendyx@us.ibm.com>
*
***********************************************************************/
#include <linux/delay.h> /* For udelay */
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 910a8ed..b05d1b2 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -929,8 +929,7 @@ do_holes:
block_in_page += this_chunk_blocks;
dio->blocks_available -= this_chunk_blocks;
next_block:
- if (dio->block_in_file > dio->final_block_in_request)
- BUG();
+ BUG_ON(dio->block_in_file > dio->final_block_in_request);
if (dio->block_in_file == dio->final_block_in_request)
break;
}
diff --git a/fs/dquot.c b/fs/dquot.c
index 6b38869..81d87a4 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -590,8 +590,7 @@ we_slept:
atomic_dec(&dquot->dq_count);
#ifdef __DQUOT_PARANOIA
/* sanity check */
- if (!list_empty(&dquot->dq_free))
- BUG();
+ BUG_ON(!list_empty(&dquot->dq_free));
#endif
put_dquot_last(dquot);
spin_unlock(&dq_list_lock);
@@ -666,8 +665,7 @@ we_slept:
return NODQUOT;
}
#ifdef __DQUOT_PARANOIA
- if (!dquot->dq_sb) /* Has somebody invalidated entry under us? */
- BUG();
+ BUG_ON(!dquot->dq_sb); /* Has somebody invalidated entry under us? */
#endif
return dquot;
diff --git a/fs/exec.c b/fs/exec.c
index 950ebd4..0291a68 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -561,7 +561,7 @@ static int exec_mmap(struct mm_struct *m
arch_pick_mmap_layout(mm);
if (old_mm) {
up_read(&old_mm->mmap_sem);
- if (active_mm != old_mm) BUG();
+ BUG_ON(active_mm != old_mm);
mmput(old_mm);
return 0;
}
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 2a24791..d35cbc6 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -453,8 +453,7 @@ static void send_sigio_to_task(struct ta
/* Make sure we are called with one of the POLL_*
reasons, otherwise we could leak kernel stack into
userspace. */
- if ((reason & __SI_MASK) != __SI_POLL)
- BUG();
+ BUG_ON((reason & __SI_MASK) != __SI_POLL);
if (reason - POLL_IN >= NSIGPOLL)
si.si_band = ~0L;
else
diff --git a/fs/freevxfs/vxfs_olt.c b/fs/freevxfs/vxfs_olt.c
index 76a0708..0495008 100644
--- a/fs/freevxfs/vxfs_olt.c
+++ b/fs/freevxfs/vxfs_olt.c
@@ -42,24 +42,21 @@
static inline void
vxfs_get_fshead(struct vxfs_oltfshead *fshp, struct vxfs_sb_info *infp)
{
- if (infp->vsi_fshino)
- BUG();
+ BUG_ON(infp->vsi_fshino);
infp->vsi_fshino = fshp->olt_fsino[0];
}
static inline void
vxfs_get_ilist(struct vxfs_oltilist *ilistp, struct vxfs_sb_info *infp)
{
- if (infp->vsi_iext)
- BUG();
+ BUG_ON(infp->vsi_iext);
infp->vsi_iext = ilistp->olt_iext[0];
}
static inline u_long
vxfs_oblock(struct super_block *sbp, daddr_t block, u_long bsize)
{
- if (sbp->s_blocksize % bsize)
- BUG();
+ BUG_ON(sbp->s_blocksize % bsize);
return (block * (sbp->s_blocksize / bsize));
}
diff --git a/fs/hfsplus/bnode.c b/fs/hfsplus/bnode.c
index 8f07e8f..746abc9 100644
--- a/fs/hfsplus/bnode.c
+++ b/fs/hfsplus/bnode.c
@@ -466,8 +466,7 @@ void hfs_bnode_unhash(struct hfs_bnode *
for (p = &node->tree->node_hash[hfs_bnode_hash(node->this)];
*p && *p != node; p = &(*p)->next_hash)
;
- if (!*p)
- BUG();
+ BUG_ON(!*p);
*p = node->next_hash;
node->tree->node_hash_cnt--;
}
@@ -622,8 +621,7 @@ void hfs_bnode_put(struct hfs_bnode *nod
dprint(DBG_BNODE_REFS, "put_node(%d:%d): %d\n",
node->tree->cnid, node->this, atomic_read(&node->refcnt));
- if (!atomic_read(&node->refcnt))
- BUG();
+ BUG_ON(!atomic_read(&node->refcnt));
if (!atomic_dec_and_lock(&node->refcnt, &tree->hash_lock))
return;
for (i = 0; i < tree->pages_per_bnode; i++) {
diff --git a/fs/hfsplus/btree.c b/fs/hfsplus/btree.c
index a67edfa..effa899 100644
--- a/fs/hfsplus/btree.c
+++ b/fs/hfsplus/btree.c
@@ -269,8 +269,7 @@ void hfs_bmap_free(struct hfs_bnode *nod
u8 *data, byte, m;
dprint(DBG_BNODE_MOD, "btree_free_node: %u\n", node->this);
- if (!node->this)
- BUG();
+ BUG_ON(!node->this);
tree = node->tree;
nidx = node->this;
node = hfs_bnode_find(tree, 0);
diff --git a/fs/inode.c b/fs/inode.c
index 32b7c33..3a2446a 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -172,8 +172,7 @@ static struct inode *alloc_inode(struct
void destroy_inode(struct inode *inode)
{
- if (inode_has_buffers(inode))
- BUG();
+ BUG_ON(inode_has_buffers(inode));
security_inode_free(inode);
if (inode->i_sb->s_op->destroy_inode)
inode->i_sb->s_op->destroy_inode(inode);
@@ -249,12 +248,9 @@ void clear_inode(struct inode *inode)
might_sleep();
invalidate_inode_buffers(inode);
- if (inode->i_data.nrpages)
- BUG();
- if (!(inode->i_state & I_FREEING))
- BUG();
- if (inode->i_state & I_CLEAR)
- BUG();
+ BUG_ON(inode->i_data.nrpages);
+ BUG_ON(!(inode->i_state & I_FREEING));
+ BUG_ON(inode->i_state & I_CLEAR);
wait_on_inode(inode);
DQUOT_DROP(inode);
if (inode->i_sb && inode->i_sb->s_op->clear_inode)
@@ -1054,8 +1050,7 @@ void generic_delete_inode(struct inode *
hlist_del_init(&inode->i_hash);
spin_unlock(&inode_lock);
wake_up_inode(inode);
- if (inode->i_state != I_CLEAR)
- BUG();
+ BUG_ON(inode->i_state != I_CLEAR);
destroy_inode(inode);
}
diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c
index 7b77a95..ff2a872 100644
--- a/fs/jffs2/background.c
+++ b/fs/jffs2/background.c
@@ -35,8 +35,7 @@ int jffs2_start_garbage_collect_thread(s
pid_t pid;
int ret = 0;
- if (c->gc_task)
- BUG();
+ BUG_ON(c->gc_task);
init_completion(&c->gc_thread_start);
init_completion(&c->gc_thread_exit);
diff --git a/fs/smbfs/file.c b/fs/smbfs/file.c
index c56bd99..ed9a24d 100644
--- a/fs/smbfs/file.c
+++ b/fs/smbfs/file.c
@@ -178,11 +178,9 @@ smb_writepage(struct page *page, struct
unsigned offset = PAGE_CACHE_SIZE;
int err;
- if (!mapping)
- BUG();
+ BUG_ON(!mapping);
inode = mapping->host;
- if (!inode)
- BUG();
+ BUG_ON(!inode);
end_index = inode->i_size >> PAGE_CACHE_SHIFT;
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index f26880a..6cfdc9a 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -50,7 +50,7 @@ static struct sysfs_dirent * sysfs_new_d
return sd;
}
-/**
+/*
*
* Return -EEXIST if there is already a sysfs element with the same name for
* the same parent.
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 4c29ac4..f0b347b 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -175,8 +175,7 @@ const unsigned char * sysfs_get_name(str
struct bin_attribute * bin_attr;
struct sysfs_symlink * sl;
- if (!sd || !sd->s_element)
- BUG();
+ BUG_ON(!sd || !sd->s_element);
switch (sd->s_type) {
case SYSFS_DIR:
diff --git a/fs/sysv/dir.c b/fs/sysv/dir.c
index 8c66e92..d707434 100644
--- a/fs/sysv/dir.c
+++ b/fs/sysv/dir.c
@@ -253,8 +253,7 @@ int sysv_delete_entry(struct sysv_dir_en
lock_page(page);
err = mapping->a_ops->prepare_write(NULL, page, from, to);
- if (err)
- BUG();
+ BUG_ON(err);
de->inode = 0;
err = dir_commit_chunk(page, from, to);
dir_put_page(page);
@@ -353,8 +352,7 @@ void sysv_set_link(struct sysv_dir_entry
lock_page(page);
err = page->mapping->a_ops->prepare_write(NULL, page, from, to);
- if (err)
- BUG();
+ BUG_ON(err);
de->inode = cpu_to_fs16(SYSV_SB(inode->i_sb), inode->i_ino);
err = dir_commit_chunk(page, from, to);
dir_put_page(page);
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 81e0e84..2983afd 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -312,12 +312,10 @@ static int udf_get_block(struct inode *i
err = 0;
bh = inode_getblk(inode, block, &err, &phys, &new);
- if (bh)
- BUG();
+ BUG_ON(bh);
if (err)
goto abort;
- if (!phys)
- BUG();
+ BUG_ON(!phys);
if (new)
set_buffer_new(bh_result);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 4ed7e60..1e9ebab 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -864,7 +864,7 @@ struct super_block {
*/
struct mutex s_vfs_rename_mutex; /* Kludge */
- /* Granuality of c/m/atime in ns.
+ /* Granularity of c/m/atime in ns.
Cannot be worse than a second */
u32 s_time_gran;
};
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index b209392..306acf1 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -80,7 +80,7 @@ struct hrtimer_sleeper {
* @first: pointer to the timer node which expires first
* @resolution: the resolution of the clock, in nanoseconds
* @get_time: function to retrieve the current time of the clock
- * @get_sofirq_time: function to retrieve the current time from the softirq
+ * @get_softirq_time: function to retrieve the current time from the softirq
* @curr_timer: the timer which is executing a callback right now
* @softirq_time: the time when running the hrtimer queue in the softirq
*/
diff --git a/ipc/shm.c b/ipc/shm.c
index f806a2e..6b0c9af 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -91,8 +91,8 @@ static inline int shm_addid(struct shmid
static inline void shm_inc (int id) {
struct shmid_kernel *shp;
- if(!(shp = shm_lock(id)))
- BUG();
+ shp = shm_lock(id);
+ BUG_ON(!shp);
shp->shm_atim = get_seconds();
shp->shm_lprid = current->tgid;
shp->shm_nattch++;
@@ -142,8 +142,8 @@ static void shm_close (struct vm_area_st
mutex_lock(&shm_ids.mutex);
/* remove from the list of attaches of the shm segment */
- if(!(shp = shm_lock(id)))
- BUG();
+ shp = shm_lock(id);
+ BUG_ON(!shp);
shp->shm_lprid = current->tgid;
shp->shm_dtim = get_seconds();
shp->shm_nattch--;
@@ -283,8 +283,7 @@ asmlinkage long sys_shmget (key_t key, s
err = -EEXIST;
} else {
shp = shm_lock(id);
- if(shp==NULL)
- BUG();
+ BUG_ON(shp==NULL);
if (shp->shm_segsz < size)
err = -EINVAL;
else if (ipcperms(&shp->shm_perm, shmflg))
@@ -774,8 +773,8 @@ invalid:
up_write(¤t->mm->mmap_sem);
mutex_lock(&shm_ids.mutex);
- if(!(shp = shm_lock(shmid)))
- BUG();
+ shp = shm_lock(shmid);
+ BUG_ON(!shp);
shp->shm_nattch--;
if(shp->shm_nattch == 0 &&
shp->shm_perm.mode & SHM_DEST)
diff --git a/ipc/util.c b/ipc/util.c
index 23151ef..5e785a2 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -266,8 +266,7 @@ struct kern_ipc_perm* ipc_rmid(struct ip
{
struct kern_ipc_perm* p;
int lid = id % SEQ_MULTIPLIER;
- if(lid >= ids->entries->size)
- BUG();
+ BUG_ON(lid >= ids->entries->size);
/*
* do not need a rcu_dereference()() here to force ordering
@@ -275,8 +274,7 @@ struct kern_ipc_perm* ipc_rmid(struct ip
*/
p = ids->entries->p[lid];
ids->entries->p[lid] = NULL;
- if(p==NULL)
- BUG();
+ BUG_ON(p==NULL);
ids->in_use--;
if (lid == ids->max_id) {
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 9fd8d4f..ce0dfb8 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -41,7 +41,7 @@ config SOFTWARE_SUSPEND
depends on PM && SWAP && (X86 && (!SMP || SUSPEND_SMP)) || ((FRV || PPC32) && !SMP)
---help---
Enable the possibility of suspending the machine.
- It doesn't need APM.
+ It doesn't need ACPI or APM.
You may suspend your machine by 'swsusp' or 'shutdown -z <time>'
(patch for sysvinit needed).
diff --git a/kernel/printk.c b/kernel/printk.c
index 8cc1943..c056f33 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -360,8 +360,7 @@ static void call_console_drivers(unsigne
unsigned long cur_index, start_print;
static int msg_level = -1;
- if (((long)(start - end)) > 0)
- BUG();
+ BUG_ON(((long)(start - end)) > 0);
cur_index = start;
start_print = start;
@@ -708,8 +707,7 @@ int __init add_preferred_console(char *n
*/
void acquire_console_sem(void)
{
- if (in_interrupt())
- BUG();
+ BUG_ON(in_interrupt());
down(&console_sem);
console_locked = 1;
console_may_schedule = 1;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 86a7f6c..0eeb7e6 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -30,8 +30,7 @@
*/
void __ptrace_link(task_t *child, task_t *new_parent)
{
- if (!list_empty(&child->ptrace_list))
- BUG();
+ BUG_ON(!list_empty(&child->ptrace_list));
if (child->parent == new_parent)
return;
list_add(&child->ptrace_list, &child->parent->ptrace_children);
diff --git a/kernel/signal.c b/kernel/signal.c
index 92025b1..5ccaac5 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -769,8 +769,7 @@ specific_send_sig_info(int sig, struct s
{
int ret = 0;
- if (!irqs_disabled())
- BUG();
+ BUG_ON(!irqs_disabled());
assert_spin_locked(&t->sighand->siglock);
/* Short-circuit ignored signals. */
@@ -1384,8 +1383,7 @@ send_group_sigqueue(int sig, struct sigq
* the overrun count. Other uses should not try to
* send the signal multiple times.
*/
- if (q->info.si_code != SI_TIMER)
- BUG();
+ BUG_ON(q->info.si_code != SI_TIMER);
q->info.si_overrun++;
goto out;
}
diff --git a/kernel/time.c b/kernel/time.c
index ff8e701..b00ddc7 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -410,7 +410,7 @@ EXPORT_SYMBOL(current_kernel_time);
* current_fs_time - Return FS time
* @sb: Superblock.
*
- * Return the current time truncated to the time granuality supported by
+ * Return the current time truncated to the time granularity supported by
* the fs.
*/
struct timespec current_fs_time(struct super_block *sb)
@@ -421,11 +421,11 @@ struct timespec current_fs_time(struct s
EXPORT_SYMBOL(current_fs_time);
/**
- * timespec_trunc - Truncate timespec to a granuality
+ * timespec_trunc - Truncate timespec to a granularity
* @t: Timespec
- * @gran: Granuality in ns.
+ * @gran: Granularity in ns.
*
- * Truncate a timespec to a granuality. gran must be smaller than a second.
+ * Truncate a timespec to a granularity. gran must be smaller than a second.
* Always rounds down.
*
* This function should be only used for timestamps returned by
diff --git a/kernel/timer.c b/kernel/timer.c
index 6b812c0..c3a874f 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1479,8 +1479,7 @@ register_time_interpolator(struct time_i
unsigned long flags;
/* Sanity check */
- if (ti->frequency == 0 || ti->mask == 0)
- BUG();
+ BUG_ON(ti->frequency == 0 || ti->mask == 0);
ti->nsec_per_cyc = ((u64)NSEC_PER_SEC << ti->shift) / ti->frequency;
spin_lock(&time_interpolator_lock);
diff --git a/mm/highmem.c b/mm/highmem.c
index 55885f6..9b274fd 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -74,8 +74,7 @@ static void flush_all_zero_pkmaps(void)
pkmap_count[i] = 0;
/* sanity check */
- if (pte_none(pkmap_page_table[i]))
- BUG();
+ BUG_ON(pte_none(pkmap_page_table[i]));
/*
* Don't need an atomic fetch-and-clear op here;
@@ -158,8 +157,7 @@ void fastcall *kmap_high(struct page *pa
if (!vaddr)
vaddr = map_new_virtual(page);
pkmap_count[PKMAP_NR(vaddr)]++;
- if (pkmap_count[PKMAP_NR(vaddr)] < 2)
- BUG();
+ BUG_ON(pkmap_count[PKMAP_NR(vaddr)] < 2);
spin_unlock(&kmap_lock);
return (void*) vaddr;
}
@@ -174,8 +172,7 @@ void fastcall kunmap_high(struct page *p
spin_lock(&kmap_lock);
vaddr = (unsigned long)page_address(page);
- if (!vaddr)
- BUG();
+ BUG_ON(!vaddr);
nr = PKMAP_NR(vaddr);
/*
@@ -220,8 +217,7 @@ static __init int init_emergency_pool(vo
return 0;
page_pool = mempool_create_page_pool(POOL_SIZE, 0);
- if (!page_pool)
- BUG();
+ BUG_ON(!page_pool);
printk("highmem bounce pool size: %d pages\n", POOL_SIZE);
return 0;
@@ -264,8 +260,7 @@ int init_emergency_isa_pool(void)
isa_page_pool = mempool_create(ISA_POOL_SIZE, mempool_alloc_pages_isa,
mempool_free_pages, (void *) 0);
- if (!isa_page_pool)
- BUG();
+ BUG_ON(!isa_page_pool);
printk("isa bounce pool size: %d pages\n", ISA_POOL_SIZE);
return 0;
diff --git a/mm/mmap.c b/mm/mmap.c
index 4f5b570..e780d19 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -294,8 +294,7 @@ void validate_mm(struct mm_struct *mm)
i = browse_rb(&mm->mm_rb);
if (i != mm->map_count)
printk("map_count %d rb %d\n", mm->map_count, i), bug = 1;
- if (bug)
- BUG();
+ BUG_ON(bug);
}
#else
#define validate_mm(mm) do { } while (0)
@@ -432,8 +431,7 @@ __insert_vm_struct(struct mm_struct * mm
struct rb_node ** rb_link, * rb_parent;
__vma = find_vma_prepare(mm, vma->vm_start,&prev, &rb_link, &rb_parent);
- if (__vma && __vma->vm_start < vma->vm_end)
- BUG();
+ BUG_ON(__vma && __vma->vm_start < vma->vm_end);
__vma_link(mm, vma, prev, rb_link, rb_parent);
mm->map_count++;
}
@@ -813,8 +811,7 @@ try_prev:
* (e.g. stash info in next's anon_vma_node when assigning
* an anon_vma, or when trying vma_merge). Another time.
*/
- if (find_vma_prev(vma->vm_mm, vma->vm_start, &near) != vma)
- BUG();
+ BUG_ON(find_vma_prev(vma->vm_mm, vma->vm_start, &near) != vma);
if (!near)
goto none;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 893d767..6dcce3a 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -258,7 +258,7 @@ static void balance_dirty_pages(struct a
/**
* balance_dirty_pages_ratelimited_nr - balance dirty memory state
* @mapping: address_space which was dirtied
- * @nr_pages: number of pages which the caller has just dirtied
+ * @nr_pages_dirtied: number of pages which the caller has just dirtied
*
* Processes which are dirtying memory should call in here once for each page
* which was newly dirtied. The function will periodically check the system's
diff --git a/mm/slab.c b/mm/slab.c
index 4cbf8bb..f055c14 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -1297,8 +1297,7 @@ void __init kmem_cache_init(void)
if (cache_cache.num)
break;
}
- if (!cache_cache.num)
- BUG();
+ BUG_ON(!cache_cache.num);
cache_cache.gfporder = order;
cache_cache.colour = left_over / cache_cache.colour_off;
cache_cache.slab_size = ALIGN(cache_cache.num * sizeof(kmem_bufctl_t) +
@@ -1974,8 +1973,7 @@ kmem_cache_create (const char *name, siz
* Always checks flags, a caller might be expecting debug support which
* isn't available.
*/
- if (flags & ~CREATE_MASK)
- BUG();
+ BUG_ON(flags & ~CREATE_MASK);
/*
* Check that size is in terms of words. This is needed to avoid
@@ -2206,8 +2204,7 @@ static int __node_shrink(struct kmem_cac
slabp = list_entry(l3->slabs_free.prev, struct slab, list);
#if DEBUG
- if (slabp->inuse)
- BUG();
+ BUG_ON(slabp->inuse);
#endif
list_del(&slabp->list);
@@ -2248,8 +2245,7 @@ static int __cache_shrink(struct kmem_ca
*/
int kmem_cache_shrink(struct kmem_cache *cachep)
{
- if (!cachep || in_interrupt())
- BUG();
+ BUG_ON(!cachep || in_interrupt());
return __cache_shrink(cachep);
}
@@ -2277,8 +2273,7 @@ int kmem_cache_destroy(struct kmem_cache
int i;
struct kmem_list3 *l3;
- if (!cachep || in_interrupt())
- BUG();
+ BUG_ON(!cachep || in_interrupt());
/* Don't let CPUs to come and go */
lock_cpu_hotplug();
@@ -2477,8 +2472,7 @@ static int cache_grow(struct kmem_cache
* Be lazy and only check for valid flags here, keeping it out of the
* critical path in kmem_cache_alloc().
*/
- if (flags & ~(SLAB_DMA | SLAB_LEVEL_MASK | SLAB_NO_GROW))
- BUG();
+ BUG_ON(flags & ~(SLAB_DMA | SLAB_LEVEL_MASK | SLAB_NO_GROW));
if (flags & SLAB_NO_GROW)
return 0;
diff --git a/mm/swap_state.c b/mm/swap_state.c
index d7af296..e0e1583 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -148,8 +148,7 @@ int add_to_swap(struct page * page, gfp_
swp_entry_t entry;
int err;
- if (!PageLocked(page))
- BUG();
+ BUG_ON(!PageLocked(page));
for (;;) {
entry = get_swap_page();
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 729eb3e..c0504f1 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -321,8 +321,7 @@ void __vunmap(void *addr, int deallocate
int i;
for (i = 0; i < area->nr_pages; i++) {
- if (unlikely(!area->pages[i]))
- BUG();
+ BUG_ON(!area->pages[i]);
__free_page(area->pages[i]);
}
^ permalink raw reply related [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-04-01 10:43 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-04-01 10:43 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Adrian Bunk:
help text: SOFTWARE_SUSPEND doesn't need ACPI
fix a typo in the AIC7XXX_DEBUG_MASK help text
fix the email address of Wendy Xiong
typos: s/ducument/document/
Anders Larsen:
MTD: remove obsolete Kconfig options
Cal Peake:
BFP->BPF in Documentation/networking/tuntap.txt
Eric Sesterhenn:
BUG_ON() Conversion in md/dm-target.c
BUG_ON() Conversion in md/raid1.c
BUG_ON() Conversion in fs/direct-io.c
BUG_ON() Conversion in fs/exec.c
BUG_ON() Conversion in fs/hfsplus/
BUG_ON() Conversion in fs/jffs2/
BUG_ON() Conversion in fs/smbfs/
BUG_ON() Conversion in fs/sysfs/
BUG_ON() Conversion in ipc/util.c
BUG_ON() Conversion in kernel/printk.c
BUG_ON() Conversion in mm/mmap.c
BUG_ON() Conversion in mm/swap_state.c
BUG_ON() Conversion in mm/vmalloc.c
BUG_ON() Conversion in drivers/s390/block/dasd_erp.c
BUG_ON() Conversion in drivers/s390/char/tape_block.c
Horms:
Documentation: Reorder documentation of nomca and nomce
Documentation: Make fujitsu/frv/kernel-ABI.txt 80 columns wide
kexec: grammar fix for crash_save_this_cpu()
Kalin KOZHUHAROV:
Fix comments: s/granuality/granularity/
Michael Hayes:
Fix minor documentation typo
Stefan Richter:
Doc/kernel-parameters.txt: delete false version information and history
Doc/kernel-parameters.txt: mention modinfo and sysfs
Doc/kernel-parameters.txt: slightly reword sentence about restrictions
Uwe Zeisberger:
fix typo "Suposse" -> "Suppose"
Documentation/DocBook/Makefile | 2
Documentation/acpi-hotkey.txt | 2
Documentation/fujitsu/frv/kernel-ABI.txt | 196 +++++++++++++----------
Documentation/kernel-parameters.txt | 34 +--
Documentation/networking/packet_mmap.txt | 2
Documentation/networking/tuntap.txt | 2
arch/i386/kernel/crash.c | 2
drivers/md/dm-target.c | 3
drivers/md/raid1.c | 6
drivers/mtd/chips/Kconfig | 21 --
drivers/s390/block/dasd_erp.c | 8
drivers/s390/char/sclp_rw.c | 2
drivers/s390/char/tape_block.c | 13 -
drivers/scsi/aic7xxx/Kconfig.aic7xxx | 2
drivers/serial/jsm/jsm.h | 2
drivers/serial/jsm/jsm_driver.c | 2
drivers/serial/jsm/jsm_neo.c | 2
fs/direct-io.c | 3
fs/exec.c | 2
fs/hfsplus/bnode.c | 6
fs/hfsplus/btree.c | 3
fs/jffs2/background.c | 3
fs/smbfs/file.c | 6
fs/sysfs/inode.c | 3
include/linux/fs.h | 2
ipc/util.c | 6
kernel/power/Kconfig | 2
kernel/printk.c | 6
kernel/time.c | 8
mm/mmap.c | 9 -
mm/swap_state.c | 3
mm/vmalloc.c | 3
32 files changed, 170 insertions(+), 196 deletions(-)
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 7d87dd7..5a2882d 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -2,7 +2,7 @@
# This makefile is used to generate the kernel documentation,
# primarily based on in-line comments in various source files.
# See Documentation/kernel-doc-nano-HOWTO.txt for instruction in how
-# to ducument the SRC - and how to read it.
+# to document the SRC - and how to read it.
# To add a new book the only step required is to add the book to the
# list of DOCBOOKS.
diff --git a/Documentation/acpi-hotkey.txt b/Documentation/acpi-hotkey.txt
index 744f1ae..38040fa 100644
--- a/Documentation/acpi-hotkey.txt
+++ b/Documentation/acpi-hotkey.txt
@@ -30,7 +30,7 @@ specific hotkey(event))
echo "event_num:event_type:event_argument" >
/proc/acpi/hotkey/action.
The result of the execution of this aml method is
-attached to /proc/acpi/hotkey/poll_method, which is dnyamically
+attached to /proc/acpi/hotkey/poll_method, which is dynamically
created. Please use command "cat /proc/acpi/hotkey/polling_method"
to retrieve it.
diff --git a/Documentation/fujitsu/frv/kernel-ABI.txt b/Documentation/fujitsu/frv/kernel-ABI.txt
index 0ed9b0a..8b0a5fc 100644
--- a/Documentation/fujitsu/frv/kernel-ABI.txt
+++ b/Documentation/fujitsu/frv/kernel-ABI.txt
@@ -1,17 +1,19 @@
- =================================
- INTERNAL KERNEL ABI FOR FR-V ARCH
- =================================
-
-The internal FRV kernel ABI is not quite the same as the userspace ABI. A number of the registers
-are used for special purposed, and the ABI is not consistent between modules vs core, and MMU vs
-no-MMU.
-
-This partly stems from the fact that FRV CPUs do not have a separate supervisor stack pointer, and
-most of them do not have any scratch registers, thus requiring at least one general purpose
-register to be clobbered in such an event. Also, within the kernel core, it is possible to simply
-jump or call directly between functions using a relative offset. This cannot be extended to modules
-for the displacement is likely to be too far. Thus in modules the address of a function to call
-must be calculated in a register and then used, requiring two extra instructions.
+ =================================
+ INTERNAL KERNEL ABI FOR FR-V ARCH
+ =================================
+
+The internal FRV kernel ABI is not quite the same as the userspace ABI. A
+number of the registers are used for special purposed, and the ABI is not
+consistent between modules vs core, and MMU vs no-MMU.
+
+This partly stems from the fact that FRV CPUs do not have a separate
+supervisor stack pointer, and most of them do not have any scratch
+registers, thus requiring at least one general purpose register to be
+clobbered in such an event. Also, within the kernel core, it is possible to
+simply jump or call directly between functions using a relative offset.
+This cannot be extended to modules for the displacement is likely to be too
+far. Thus in modules the address of a function to call must be calculated
+in a register and then used, requiring two extra instructions.
This document has the following sections:
@@ -39,7 +41,8 @@ When a system call is made, the followin
CPU OPERATING MODES
===================
-The FR-V CPU has three basic operating modes. In order of increasing capability:
+The FR-V CPU has three basic operating modes. In order of increasing
+capability:
(1) User mode.
@@ -47,42 +50,46 @@ The FR-V CPU has three basic operating m
(2) Kernel mode.
- Normal kernel mode. There are many additional control registers available that may be
- accessed in this mode, in addition to all the stuff available to user mode. This has two
- submodes:
+ Normal kernel mode. There are many additional control registers
+ available that may be accessed in this mode, in addition to all the
+ stuff available to user mode. This has two submodes:
(a) Exceptions enabled (PSR.T == 1).
- Exceptions will invoke the appropriate normal kernel mode handler. On entry to the
- handler, the PSR.T bit will be cleared.
+ Exceptions will invoke the appropriate normal kernel mode
+ handler. On entry to the handler, the PSR.T bit will be cleared.
(b) Exceptions disabled (PSR.T == 0).
- No exceptions or interrupts may happen. Any mandatory exceptions will cause the CPU to
- halt unless the CPU is told to jump into debug mode instead.
+ No exceptions or interrupts may happen. Any mandatory exceptions
+ will cause the CPU to halt unless the CPU is told to jump into
+ debug mode instead.
(3) Debug mode.
- No exceptions may happen in this mode. Memory protection and management exceptions will be
- flagged for later consideration, but the exception handler won't be invoked. Debugging traps
- such as hardware breakpoints and watchpoints will be ignored. This mode is entered only by
- debugging events obtained from the other two modes.
+ No exceptions may happen in this mode. Memory protection and
+ management exceptions will be flagged for later consideration, but
+ the exception handler won't be invoked. Debugging traps such as
+ hardware breakpoints and watchpoints will be ignored. This mode is
+ entered only by debugging events obtained from the other two modes.
- All kernel mode registers may be accessed, plus a few extra debugging specific registers.
+ All kernel mode registers may be accessed, plus a few extra debugging
+ specific registers.
=================================
INTERNAL KERNEL-MODE REGISTER ABI
=================================
-There are a number of permanent register assignments that are set up by entry.S in the exception
-prologue. Note that there is a complete set of exception prologues for each of user->kernel
-transition and kernel->kernel transition. There are also user->debug and kernel->debug mode
-transition prologues.
+There are a number of permanent register assignments that are set up by
+entry.S in the exception prologue. Note that there is a complete set of
+exception prologues for each of user->kernel transition and kernel->kernel
+transition. There are also user->debug and kernel->debug mode transition
+prologues.
REGISTER FLAVOUR USE
- =============== ======= ====================================================
+ =============== ======= ==============================================
GR1 Supervisor stack pointer
GR15 Current thread info pointer
GR16 GP-Rel base register for small data
@@ -92,10 +99,12 @@ transition prologues.
GR31 NOMMU Destroyed by debug mode entry
GR31 MMU Destroyed by TLB miss kernel mode entry
CCR.ICC2 Virtual interrupt disablement tracking
- CCCR.CC3 Cleared by exception prologue (atomic op emulation)
+ CCCR.CC3 Cleared by exception prologue
+ (atomic op emulation)
SCR0 MMU See mmu-layout.txt.
SCR1 MMU See mmu-layout.txt.
- SCR2 MMU Save for EAR0 (destroyed by icache insns in debug mode)
+ SCR2 MMU Save for EAR0 (destroyed by icache insns
+ in debug mode)
SCR3 MMU Save for GR31 during debug exceptions
DAMR/IAMR NOMMU Fixed memory protection layout.
DAMR/IAMR MMU See mmu-layout.txt.
@@ -104,18 +113,21 @@ transition prologues.
Certain registers are also used or modified across function calls:
REGISTER CALL RETURN
- =============== =============================== ===============================
+ =============== =============================== ======================
GR0 Fixed Zero -
GR2 Function call frame pointer
GR3 Special Preserved
GR3-GR7 - Clobbered
- GR8 Function call arg #1 Return value (or clobbered)
- GR9 Function call arg #2 Return value MSW (or clobbered)
+ GR8 Function call arg #1 Return value
+ (or clobbered)
+ GR9 Function call arg #2 Return value MSW
+ (or clobbered)
GR10-GR13 Function call arg #3-#6 Clobbered
GR14 - Clobbered
GR15-GR16 Special Preserved
GR17-GR27 - Preserved
- GR28-GR31 Special Only accessed explicitly
+ GR28-GR31 Special Only accessed
+ explicitly
LR Return address after CALL Clobbered
CCR/CCCR - Mostly Clobbered
@@ -124,46 +136,53 @@ Certain registers are also used or modif
INTERNAL DEBUG-MODE REGISTER ABI
================================
-This is the same as the kernel-mode register ABI for functions calls. The difference is that in
-debug-mode there's a different stack and a different exception frame. Almost all the global
-registers from kernel-mode (including the stack pointer) may be changed.
+This is the same as the kernel-mode register ABI for functions calls. The
+difference is that in debug-mode there's a different stack and a different
+exception frame. Almost all the global registers from kernel-mode
+(including the stack pointer) may be changed.
REGISTER FLAVOUR USE
- =============== ======= ====================================================
+ =============== ======= ==============================================
GR1 Debug stack pointer
GR16 GP-Rel base register for small data
- GR31 Current debug exception frame pointer (__debug_frame)
+ GR31 Current debug exception frame pointer
+ (__debug_frame)
SCR3 MMU Saved value of GR31
-Note that debug mode is able to interfere with the kernel's emulated atomic ops, so it must be
-exceedingly careful not to do any that would interact with the main kernel in this regard. Hence
-the debug mode code (gdbstub) is almost completely self-contained. The only external code used is
-the sprintf family of functions.
-
-Futhermore, break.S is so complicated because single-step mode does not switch off on entry to an
-exception. That means unless manually disabled, single-stepping will blithely go on stepping into
-things like interrupts. See gdbstub.txt for more information.
+Note that debug mode is able to interfere with the kernel's emulated atomic
+ops, so it must be exceedingly careful not to do any that would interact
+with the main kernel in this regard. Hence the debug mode code (gdbstub) is
+almost completely self-contained. The only external code used is the
+sprintf family of functions.
+
+Futhermore, break.S is so complicated because single-step mode does not
+switch off on entry to an exception. That means unless manually disabled,
+single-stepping will blithely go on stepping into things like interrupts.
+See gdbstub.txt for more information.
==========================
VIRTUAL INTERRUPT HANDLING
==========================
-Because accesses to the PSR is so slow, and to disable interrupts we have to access it twice (once
-to read and once to write), we don't actually disable interrupts at all if we don't have to. What
-we do instead is use the ICC2 condition code flags to note virtual disablement, such that if we
-then do take an interrupt, we note the flag, really disable interrupts, set another flag and resume
-execution at the point the interrupt happened. Setting condition flags as a side effect of an
-arithmetic or logical instruction is really fast. This use of the ICC2 only occurs within the
+Because accesses to the PSR is so slow, and to disable interrupts we have
+to access it twice (once to read and once to write), we don't actually
+disable interrupts at all if we don't have to. What we do instead is use
+the ICC2 condition code flags to note virtual disablement, such that if we
+then do take an interrupt, we note the flag, really disable interrupts, set
+another flag and resume execution at the point the interrupt happened.
+Setting condition flags as a side effect of an arithmetic or logical
+instruction is really fast. This use of the ICC2 only occurs within the
kernel - it does not affect userspace.
The flags we use are:
(*) CCR.ICC2.Z [Zero flag]
- Set to virtually disable interrupts, clear when interrupts are virtually enabled. Can be
- modified by logical instructions without affecting the Carry flag.
+ Set to virtually disable interrupts, clear when interrupts are
+ virtually enabled. Can be modified by logical instructions without
+ affecting the Carry flag.
(*) CCR.ICC2.C [Carry flag]
@@ -176,8 +195,9 @@ What happens is this:
ICC2.Z is 0, ICC2.C is 1.
- (2) An interrupt occurs. The exception prologue examines ICC2.Z and determines that nothing needs
- doing. This is done simply with an unlikely BEQ instruction.
+ (2) An interrupt occurs. The exception prologue examines ICC2.Z and
+ determines that nothing needs doing. This is done simply with an
+ unlikely BEQ instruction.
(3) The interrupts are disabled (local_irq_disable)
@@ -187,48 +207,56 @@ What happens is this:
ICC2.Z would be set to 0.
- A TIHI #2 instruction (trap #2 if condition HI - Z==0 && C==0) would be used to trap if
- interrupts were now virtually enabled, but physically disabled - which they're not, so the
- trap isn't taken. The kernel would then be back to state (1).
-
- (5) An interrupt occurs. The exception prologue examines ICC2.Z and determines that the interrupt
- shouldn't actually have happened. It jumps aside, and there disabled interrupts by setting
- PSR.PIL to 14 and then it clears ICC2.C.
+ A TIHI #2 instruction (trap #2 if condition HI - Z==0 && C==0) would
+ be used to trap if interrupts were now virtually enabled, but
+ physically disabled - which they're not, so the trap isn't taken. The
+ kernel would then be back to state (1).
+
+ (5) An interrupt occurs. The exception prologue examines ICC2.Z and
+ determines that the interrupt shouldn't actually have happened. It
+ jumps aside, and there disabled interrupts by setting PSR.PIL to 14
+ and then it clears ICC2.C.
(6) If interrupts were then saved and disabled again (local_irq_save):
- ICC2.Z would be shifted into the save variable and masked off (giving a 1).
+ ICC2.Z would be shifted into the save variable and masked off
+ (giving a 1).
- ICC2.Z would then be set to 1 (thus unchanged), and ICC2.C would be unaffected (ie: 0).
+ ICC2.Z would then be set to 1 (thus unchanged), and ICC2.C would be
+ unaffected (ie: 0).
(7) If interrupts were then restored from state (6) (local_irq_restore):
- ICC2.Z would be set to indicate the result of XOR'ing the saved value (ie: 1) with 1, which
- gives a result of 0 - thus leaving ICC2.Z set.
+ ICC2.Z would be set to indicate the result of XOR'ing the saved
+ value (ie: 1) with 1, which gives a result of 0 - thus leaving
+ ICC2.Z set.
ICC2.C would remain unaffected (ie: 0).
- A TIHI #2 instruction would be used to again assay the current state, but this would do
- nothing as Z==1.
+ A TIHI #2 instruction would be used to again assay the current state,
+ but this would do nothing as Z==1.
(8) If interrupts were then enabled (local_irq_enable):
- ICC2.Z would be cleared. ICC2.C would be left unaffected. Both flags would now be 0.
+ ICC2.Z would be cleared. ICC2.C would be left unaffected. Both
+ flags would now be 0.
- A TIHI #2 instruction again issued to assay the current state would then trap as both Z==0
- [interrupts virtually enabled] and C==0 [interrupts really disabled] would then be true.
+ A TIHI #2 instruction again issued to assay the current state would
+ then trap as both Z==0 [interrupts virtually enabled] and C==0
+ [interrupts really disabled] would then be true.
- (9) The trap #2 handler would simply enable hardware interrupts (set PSR.PIL to 0), set ICC2.C to
- 1 and return.
+ (9) The trap #2 handler would simply enable hardware interrupts
+ (set PSR.PIL to 0), set ICC2.C to 1 and return.
(10) Immediately upon returning, the pending interrupt would be taken.
-(11) The interrupt handler would take the path of actually processing the interrupt (ICC2.Z is
- clear, BEQ fails as per step (2)).
+(11) The interrupt handler would take the path of actually processing the
+ interrupt (ICC2.Z is clear, BEQ fails as per step (2)).
-(12) The interrupt handler would then set ICC2.C to 1 since hardware interrupts are definitely
- enabled - or else the kernel wouldn't be here.
+(12) The interrupt handler would then set ICC2.C to 1 since hardware
+ interrupts are definitely enabled - or else the kernel wouldn't be here.
(13) On return from the interrupt handler, things would be back to state (1).
-This trap (#2) is only available in kernel mode. In user mode it will result in SIGILL.
+This trap (#2) is only available in kernel mode. In user mode it will
+result in SIGILL.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index f8cb55c..b3a6187 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1,4 +1,4 @@
-February 2003 Kernel Parameters v2.5.59
+ Kernel Parameters
~~~~~~~~~~~~~~~~~
The following is a consolidated list of the kernel parameters as implemented
@@ -17,9 +17,17 @@ are specified on the kernel command line
usbcore.blinkenlights=1
-The text in square brackets at the beginning of the description states the
-restrictions on the kernel for the said kernel parameter to be valid. The
-restrictions referred to are that the relevant option is valid if:
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+The parameters listed below are only valid if certain kernel build options were
+enabled and if respective hardware is present. The text in square brackets at
+the beginning of each description states the restrictions within which a
+parameter is applicable:
ACPI ACPI support is enabled.
ALSA ALSA sound support is enabled.
@@ -1046,10 +1054,10 @@ running once the system is up.
noltlbs [PPC] Do not use large page/tlb entries for kernel
lowmem mapping on PPC40x.
- nomce [IA-32] Machine Check Exception
-
nomca [IA-64] Disable machine check abort handling
+ nomce [IA-32] Machine Check Exception
+
noresidual [PPC] Don't use residual data on PReP machines.
noresume [SWSUSP] Disables resume and restores original swap
@@ -1682,20 +1690,6 @@ running once the system is up.
______________________________________________________________________
-Changelog:
-
-2000-06-?? Mr. Unknown
- The last known update (for 2.4.0) - the changelog was not kept before.
-
-2002-11-24 Petr Baudis <pasky@ucw.cz>
- Randy Dunlap <randy.dunlap@verizon.net>
- Update for 2.5.49, description for most of the options introduced,
- references to other documentation (C files, READMEs, ..), added S390,
- PPC, SPARC, MTD, ALSA and OSS category. Minor corrections and
- reformatting.
-
-2005-10-19 Randy Dunlap <rdunlap@xenotime.net>
- Lots of typos, whitespace, some reformatting.
TODO:
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index 4fc8e98..aaf99d5 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -254,7 +254,7 @@ and, the number of frames be
<block number> * <block size> / <frame size>
-Suposse the following parameters, which apply for 2.6 kernel and an
+Suppose the following parameters, which apply for 2.6 kernel and an
i386 architecture:
<size-max> = 131072 bytes
diff --git a/Documentation/networking/tuntap.txt b/Documentation/networking/tuntap.txt
index ec3d109..76750fb 100644
--- a/Documentation/networking/tuntap.txt
+++ b/Documentation/networking/tuntap.txt
@@ -138,7 +138,7 @@ This means that you have to read/write I
ethernet frames when using tap.
5. What is the difference between BPF and TUN/TAP driver?
-BFP is an advanced packet filter. It can be attached to existing
+BPF is an advanced packet filter. It can be attached to existing
network interface. It does not provide a virtual network interface.
A TUN/TAP driver does provide a virtual network interface and it is possible
to attach BPF to this interface.
diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c
index e3c5fca..2b0cfce 100644
--- a/arch/i386/kernel/crash.c
+++ b/arch/i386/kernel/crash.c
@@ -69,7 +69,7 @@ static void crash_save_this_cpu(struct p
* for the data I pass, and I need tags
* on the data to indicate what information I have
* squirrelled away. ELF notes happen to provide
- * all of that that no need to invent something new.
+ * all of that, so there is no need to invent something new.
*/
buf = (u32*)per_cpu_ptr(crash_notes, cpu);
if (!buf)
diff --git a/drivers/md/dm-target.c b/drivers/md/dm-target.c
index aecd9e0..64fd8e7 100644
--- a/drivers/md/dm-target.c
+++ b/drivers/md/dm-target.c
@@ -78,8 +78,7 @@ void dm_put_target_type(struct target_ty
if (--ti->use == 0)
module_put(ti->tt.module);
- if (ti->use < 0)
- BUG();
+ BUG_ON(ti->use < 0);
up_read(&_lock);
return;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 9b374c9..6081941 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1558,8 +1558,7 @@ static int init_resync(conf_t *conf)
int buffs;
buffs = RESYNC_WINDOW / RESYNC_BLOCK_SIZE;
- if (conf->r1buf_pool)
- BUG();
+ BUG_ON(conf->r1buf_pool);
conf->r1buf_pool = mempool_create(buffs, r1buf_pool_alloc, r1buf_pool_free,
conf->poolinfo);
if (!conf->r1buf_pool)
@@ -1732,8 +1731,7 @@ static sector_t sync_request(mddev_t *md
!conf->fullsync &&
!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
break;
- if (sync_blocks < (PAGE_SIZE>>9))
- BUG();
+ BUG_ON(sync_blocks < (PAGE_SIZE>>9));
if (len > (sync_blocks<<9))
len = sync_blocks<<9;
}
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 0f6bb2e..a7ec595 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -200,27 +200,6 @@ config MTD_CFI_AMDSTD
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
-config MTD_CFI_AMDSTD_RETRY
- int "Retry failed commands (erase/program)"
- depends on MTD_CFI_AMDSTD
- default "0"
- help
- Some chips, when attached to a shared bus, don't properly filter
- bus traffic that is destined to other devices. This broken
- behavior causes erase and program sequences to be aborted when
- the sequences are mixed with traffic for other devices.
-
- SST49LF040 (and related) chips are know to be broken.
-
-config MTD_CFI_AMDSTD_RETRY_MAX
- int "Max retries of failed commands (erase/program)"
- depends on MTD_CFI_AMDSTD_RETRY
- default "0"
- help
- If you have an SST49LF040 (or related chip) then this value should
- be set to at least 1. This can also be adjusted at driver load
- time with the retry_cmd_max module parameter.
-
config MTD_CFI_STAA
tristate "Support for ST (Advanced Architecture) flash chips"
depends on MTD_GEN_PROBE
diff --git a/drivers/s390/block/dasd_erp.c b/drivers/s390/block/dasd_erp.c
index 8fd71ab..b842377 100644
--- a/drivers/s390/block/dasd_erp.c
+++ b/drivers/s390/block/dasd_erp.c
@@ -32,9 +32,8 @@ dasd_alloc_erp_request(char *magic, int
int size;
/* Sanity checks */
- if ( magic == NULL || datasize > PAGE_SIZE ||
- (cplength*sizeof(struct ccw1)) > PAGE_SIZE)
- BUG();
+ BUG_ON( magic == NULL || datasize > PAGE_SIZE ||
+ (cplength*sizeof(struct ccw1)) > PAGE_SIZE);
size = (sizeof(struct dasd_ccw_req) + 7L) & -8L;
if (cplength > 0)
@@ -125,8 +124,7 @@ dasd_default_erp_postaction(struct dasd_
struct dasd_device *device;
int success;
- if (cqr->refers == NULL || cqr->function == NULL)
- BUG();
+ BUG_ON(cqr->refers == NULL || cqr->function == NULL);
device = cqr->device;
success = cqr->status == DASD_CQR_DONE;
diff --git a/drivers/s390/char/sclp_rw.c b/drivers/s390/char/sclp_rw.c
index ac10dfb..91e93c7 100644
--- a/drivers/s390/char/sclp_rw.c
+++ b/drivers/s390/char/sclp_rw.c
@@ -24,7 +24,7 @@
/*
* The room for the SCCB (only for writing) is not equal to a pages size
- * (as it is specified as the maximum size in the the SCLP ducumentation)
+ * (as it is specified as the maximum size in the the SCLP documentation)
* because of the additional data structure described above.
*/
#define MAX_SCCB_ROOM (PAGE_SIZE - sizeof(struct sclp_buffer))
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 5ced272..5c65cf3 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -198,9 +198,7 @@ tapeblock_request_fn(request_queue_t *qu
device = (struct tape_device *) queue->queuedata;
DBF_LH(6, "tapeblock_request_fn(device=%p)\n", device);
- if (device == NULL)
- BUG();
-
+ BUG_ON(device == NULL);
tapeblock_trigger_requeue(device);
}
@@ -307,8 +305,7 @@ tapeblock_revalidate_disk(struct gendisk
int rc;
device = (struct tape_device *) disk->private_data;
- if (!device)
- BUG();
+ BUG_ON(!device);
if (!device->blk_data.medium_changed)
return 0;
@@ -440,11 +437,9 @@ tapeblock_ioctl(
rc = 0;
disk = inode->i_bdev->bd_disk;
- if (!disk)
- BUG();
+ BUG_ON(!disk);
device = disk->private_data;
- if (!device)
- BUG();
+ BUG_ON(!device);
minor = iminor(inode);
DBF_LH(6, "tapeblock_ioctl(0x%0x)\n", command);
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 6c2c395..5517da5 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -86,7 +86,7 @@ config AIC7XXX_DEBUG_MASK
default "0"
help
Bit mask of debug options that is only valid if the
- CONFIG_AIC7XXX_DEBUG_ENBLE option is enabled. The bits in this mask
+ CONFIG_AIC7XXX_DEBUG_ENABLE option is enabled. The bits in this mask
are defined in the drivers/scsi/aic7xxx/aic7xxx.h - search for the
variable ahc_debug in that file to find them.
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index dfc1e86..043f50b 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -20,7 +20,7 @@
*
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
- * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ * Wendy Xiong <wendyx@us.ibm.com>
*
***********************************************************************/
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index b1b66e7..b3e1f71 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -20,7 +20,7 @@
*
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
- * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ * Wendy Xiong <wendyx@us.ibm.com>
*
*
***********************************************************************/
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index 87e4e2c..a5fc589 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -20,7 +20,7 @@
*
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
- * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ * Wendy Xiong <wendyx@us.ibm.com>
*
***********************************************************************/
#include <linux/delay.h> /* For udelay */
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 910a8ed..b05d1b2 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -929,8 +929,7 @@ do_holes:
block_in_page += this_chunk_blocks;
dio->blocks_available -= this_chunk_blocks;
next_block:
- if (dio->block_in_file > dio->final_block_in_request)
- BUG();
+ BUG_ON(dio->block_in_file > dio->final_block_in_request);
if (dio->block_in_file == dio->final_block_in_request)
break;
}
diff --git a/fs/exec.c b/fs/exec.c
index 950ebd4..0291a68 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -561,7 +561,7 @@ static int exec_mmap(struct mm_struct *m
arch_pick_mmap_layout(mm);
if (old_mm) {
up_read(&old_mm->mmap_sem);
- if (active_mm != old_mm) BUG();
+ BUG_ON(active_mm != old_mm);
mmput(old_mm);
return 0;
}
diff --git a/fs/hfsplus/bnode.c b/fs/hfsplus/bnode.c
index 8f07e8f..746abc9 100644
--- a/fs/hfsplus/bnode.c
+++ b/fs/hfsplus/bnode.c
@@ -466,8 +466,7 @@ void hfs_bnode_unhash(struct hfs_bnode *
for (p = &node->tree->node_hash[hfs_bnode_hash(node->this)];
*p && *p != node; p = &(*p)->next_hash)
;
- if (!*p)
- BUG();
+ BUG_ON(!*p);
*p = node->next_hash;
node->tree->node_hash_cnt--;
}
@@ -622,8 +621,7 @@ void hfs_bnode_put(struct hfs_bnode *nod
dprint(DBG_BNODE_REFS, "put_node(%d:%d): %d\n",
node->tree->cnid, node->this, atomic_read(&node->refcnt));
- if (!atomic_read(&node->refcnt))
- BUG();
+ BUG_ON(!atomic_read(&node->refcnt));
if (!atomic_dec_and_lock(&node->refcnt, &tree->hash_lock))
return;
for (i = 0; i < tree->pages_per_bnode; i++) {
diff --git a/fs/hfsplus/btree.c b/fs/hfsplus/btree.c
index a67edfa..effa899 100644
--- a/fs/hfsplus/btree.c
+++ b/fs/hfsplus/btree.c
@@ -269,8 +269,7 @@ void hfs_bmap_free(struct hfs_bnode *nod
u8 *data, byte, m;
dprint(DBG_BNODE_MOD, "btree_free_node: %u\n", node->this);
- if (!node->this)
- BUG();
+ BUG_ON(!node->this);
tree = node->tree;
nidx = node->this;
node = hfs_bnode_find(tree, 0);
diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c
index 7b77a95..ff2a872 100644
--- a/fs/jffs2/background.c
+++ b/fs/jffs2/background.c
@@ -35,8 +35,7 @@ int jffs2_start_garbage_collect_thread(s
pid_t pid;
int ret = 0;
- if (c->gc_task)
- BUG();
+ BUG_ON(c->gc_task);
init_completion(&c->gc_thread_start);
init_completion(&c->gc_thread_exit);
diff --git a/fs/smbfs/file.c b/fs/smbfs/file.c
index c56bd99..ed9a24d 100644
--- a/fs/smbfs/file.c
+++ b/fs/smbfs/file.c
@@ -178,11 +178,9 @@ smb_writepage(struct page *page, struct
unsigned offset = PAGE_CACHE_SIZE;
int err;
- if (!mapping)
- BUG();
+ BUG_ON(!mapping);
inode = mapping->host;
- if (!inode)
- BUG();
+ BUG_ON(!inode);
end_index = inode->i_size >> PAGE_CACHE_SHIFT;
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 4c29ac4..f0b347b 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -175,8 +175,7 @@ const unsigned char * sysfs_get_name(str
struct bin_attribute * bin_attr;
struct sysfs_symlink * sl;
- if (!sd || !sd->s_element)
- BUG();
+ BUG_ON(!sd || !sd->s_element);
switch (sd->s_type) {
case SYSFS_DIR:
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 4ed7e60..1e9ebab 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -864,7 +864,7 @@ struct super_block {
*/
struct mutex s_vfs_rename_mutex; /* Kludge */
- /* Granuality of c/m/atime in ns.
+ /* Granularity of c/m/atime in ns.
Cannot be worse than a second */
u32 s_time_gran;
};
diff --git a/ipc/util.c b/ipc/util.c
index 23151ef..5e785a2 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -266,8 +266,7 @@ struct kern_ipc_perm* ipc_rmid(struct ip
{
struct kern_ipc_perm* p;
int lid = id % SEQ_MULTIPLIER;
- if(lid >= ids->entries->size)
- BUG();
+ BUG_ON(lid >= ids->entries->size);
/*
* do not need a rcu_dereference()() here to force ordering
@@ -275,8 +274,7 @@ struct kern_ipc_perm* ipc_rmid(struct ip
*/
p = ids->entries->p[lid];
ids->entries->p[lid] = NULL;
- if(p==NULL)
- BUG();
+ BUG_ON(p==NULL);
ids->in_use--;
if (lid == ids->max_id) {
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 9fd8d4f..ce0dfb8 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -41,7 +41,7 @@ config SOFTWARE_SUSPEND
depends on PM && SWAP && (X86 && (!SMP || SUSPEND_SMP)) || ((FRV || PPC32) && !SMP)
---help---
Enable the possibility of suspending the machine.
- It doesn't need APM.
+ It doesn't need ACPI or APM.
You may suspend your machine by 'swsusp' or 'shutdown -z <time>'
(patch for sysvinit needed).
diff --git a/kernel/printk.c b/kernel/printk.c
index 8cc1943..c056f33 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -360,8 +360,7 @@ static void call_console_drivers(unsigne
unsigned long cur_index, start_print;
static int msg_level = -1;
- if (((long)(start - end)) > 0)
- BUG();
+ BUG_ON(((long)(start - end)) > 0);
cur_index = start;
start_print = start;
@@ -708,8 +707,7 @@ int __init add_preferred_console(char *n
*/
void acquire_console_sem(void)
{
- if (in_interrupt())
- BUG();
+ BUG_ON(in_interrupt());
down(&console_sem);
console_locked = 1;
console_may_schedule = 1;
diff --git a/kernel/time.c b/kernel/time.c
index ff8e701..b00ddc7 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -410,7 +410,7 @@ EXPORT_SYMBOL(current_kernel_time);
* current_fs_time - Return FS time
* @sb: Superblock.
*
- * Return the current time truncated to the time granuality supported by
+ * Return the current time truncated to the time granularity supported by
* the fs.
*/
struct timespec current_fs_time(struct super_block *sb)
@@ -421,11 +421,11 @@ struct timespec current_fs_time(struct s
EXPORT_SYMBOL(current_fs_time);
/**
- * timespec_trunc - Truncate timespec to a granuality
+ * timespec_trunc - Truncate timespec to a granularity
* @t: Timespec
- * @gran: Granuality in ns.
+ * @gran: Granularity in ns.
*
- * Truncate a timespec to a granuality. gran must be smaller than a second.
+ * Truncate a timespec to a granularity. gran must be smaller than a second.
* Always rounds down.
*
* This function should be only used for timestamps returned by
diff --git a/mm/mmap.c b/mm/mmap.c
index 4f5b570..e780d19 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -294,8 +294,7 @@ void validate_mm(struct mm_struct *mm)
i = browse_rb(&mm->mm_rb);
if (i != mm->map_count)
printk("map_count %d rb %d\n", mm->map_count, i), bug = 1;
- if (bug)
- BUG();
+ BUG_ON(bug);
}
#else
#define validate_mm(mm) do { } while (0)
@@ -432,8 +431,7 @@ __insert_vm_struct(struct mm_struct * mm
struct rb_node ** rb_link, * rb_parent;
__vma = find_vma_prepare(mm, vma->vm_start,&prev, &rb_link, &rb_parent);
- if (__vma && __vma->vm_start < vma->vm_end)
- BUG();
+ BUG_ON(__vma && __vma->vm_start < vma->vm_end);
__vma_link(mm, vma, prev, rb_link, rb_parent);
mm->map_count++;
}
@@ -813,8 +811,7 @@ try_prev:
* (e.g. stash info in next's anon_vma_node when assigning
* an anon_vma, or when trying vma_merge). Another time.
*/
- if (find_vma_prev(vma->vm_mm, vma->vm_start, &near) != vma)
- BUG();
+ BUG_ON(find_vma_prev(vma->vm_mm, vma->vm_start, &near) != vma);
if (!near)
goto none;
diff --git a/mm/swap_state.c b/mm/swap_state.c
index d7af296..e0e1583 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -148,8 +148,7 @@ int add_to_swap(struct page * page, gfp_
swp_entry_t entry;
int err;
- if (!PageLocked(page))
- BUG();
+ BUG_ON(!PageLocked(page));
for (;;) {
entry = get_swap_page();
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 729eb3e..c0504f1 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -321,8 +321,7 @@ void __vunmap(void *addr, int deallocate
int i;
for (i = 0; i < area->nr_pages; i++) {
- if (unlikely(!area->pages[i]))
- BUG();
+ BUG_ON(!area->pages[i]);
__free_page(area->pages[i]);
}
^ permalink raw reply related [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-03-26 17:31 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-03-26 17:31 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Adrian Bunk:
Kconfig help: MTD_JEDECPROBE already supports Intel
Artem B. Bityuckiy:
Remove ugly debugging stuff
Bastien Roucaries:
drivers/char/ftape/lowlevel/fdc-io.c: Correct a comment
Eric Sesterhenn:
BUG_ON() Conversion in drivers/mtd/
BUG_ON() Conversion in drivers/char
BUG_ON() Conversion in drivers/isdn
BUG_ON() Conversion in md/dm-path-selector.c
BUG_ON() Conversion in md/dm-table.c
BUG_ON() Conversion in input/serio/hp_sdc_mlc.c
BUG_ON() Conversion in fs/buffer.c
BUG_ON() Conversion in fs/dcache.c
BUG_ON() Conversion in fs/hfs/
BUG_ON() Conversion in fs/ext2/
BUG_ON() Conversion in ipc/sem.c
BUG_ON() Conversion in kernel/fork.c
BUG_ON() Conversion in mm/memory.c
BUG_ON() Conversion in mm/mempool.c
BUG_ON() Conversion in drivers/s390/block/dasd_devmap.c
Florin Malita:
do_mounts.c: Minor ROOT_DEV comment cleanup
drivers/char/epca.c | 3 +--
drivers/char/ftape/lowlevel/fdc-io.c | 2 +-
drivers/char/tty_io.c | 11 ++++-------
drivers/input/serio/hp_sdc_mlc.c | 7 ++++---
drivers/isdn/hisax/hisax_fcpcipnp.c | 7 ++-----
drivers/isdn/hisax/hisax_isac.c | 9 +++------
drivers/isdn/hisax/st5481_b.c | 4 +---
drivers/isdn/hisax/st5481_d.c | 4 +---
drivers/isdn/i4l/isdn_ppp.c | 6 ++----
drivers/md/dm-path-selector.c | 3 +--
drivers/md/dm-table.c | 6 ++----
drivers/mtd/chips/Kconfig | 5 ++---
drivers/mtd/maps/dilnetpc.c | 8 ++++----
drivers/mtd/mtd_blkdevs.c | 3 +--
drivers/mtd/mtdconcat.c | 6 ++----
drivers/s390/block/dasd_devmap.c | 6 ++----
fs/buffer.c | 9 +++------
fs/dcache.c | 11 +----------
fs/ext2/dir.c | 6 ++----
fs/hfs/bnode.c | 9 +++------
fs/hfs/btree.c | 3 +--
init/do_mounts.c | 1 -
ipc/sem.c | 6 ++----
kernel/fork.c | 3 +--
mm/memory.c | 6 ++----
mm/mempool.c | 4 ++--
26 files changed, 50 insertions(+), 98 deletions(-)
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 765c5c1..9cad850 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -486,8 +486,7 @@ static void pc_close(struct tty_struct *
} /* End channel is open more than once */
/* Port open only once go ahead with shutdown & reset */
- if (ch->count < 0)
- BUG();
+ BUG_ON(ch->count < 0);
/* ---------------------------------------------------------------
Let the rest of the driver know the channel is being closed.
diff --git a/drivers/char/ftape/lowlevel/fdc-io.c b/drivers/char/ftape/lowlevel/fdc-io.c
index b2e0928..093fdf9 100644
--- a/drivers/char/ftape/lowlevel/fdc-io.c
+++ b/drivers/char/ftape/lowlevel/fdc-io.c
@@ -607,7 +607,7 @@ void fdc_reset(void)
fdc_mode = fdc_idle;
- /* maybe the cli()/sti() pair is not necessary, BUT:
+ /* maybe the spin_lock_irq* pair is not necessary, BUT:
* the following line MUST be here. Otherwise fdc_interrupt_wait()
* won't wait. Note that fdc_reset() is called from
* ftape_dumb_stop() when the fdc is busy transferring data. In this
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 48d795b..811dadb 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -543,14 +543,12 @@ void tty_ldisc_put(int disc)
struct tty_ldisc *ld;
unsigned long flags;
- if (disc < N_TTY || disc >= NR_LDISCS)
- BUG();
+ BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
spin_lock_irqsave(&tty_ldisc_lock, flags);
ld = &tty_ldiscs[disc];
- if(ld->refcount == 0)
- BUG();
- ld->refcount --;
+ BUG_ON(ld->refcount == 0);
+ ld->refcount--;
module_put(ld->owner);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}
@@ -645,8 +643,7 @@ void tty_ldisc_deref(struct tty_ldisc *l
{
unsigned long flags;
- if(ld == NULL)
- BUG();
+ BUG_ON(ld == NULL);
spin_lock_irqsave(&tty_ldisc_lock, flags);
if(ld->refcount == 0)
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index 1c9426f..aa4a8a4 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -270,9 +270,10 @@ static void hp_sdc_mlc_out (hil_mlc *mlc
do_control:
priv->emtestmode = mlc->opacket & HIL_CTRL_TEST;
- if ((mlc->opacket & (HIL_CTRL_APE | HIL_CTRL_IPF)) == HIL_CTRL_APE) {
- BUG(); /* we cannot emulate this, it should not be used. */
- }
+
+ /* we cannot emulate this, it should not be used. */
+ BUG_ON((mlc->opacket & (HIL_CTRL_APE | HIL_CTRL_IPF)) == HIL_CTRL_APE);
+
if ((mlc->opacket & HIL_CTRL_ONLY) == HIL_CTRL_ONLY) goto control_only;
if (mlc->opacket & HIL_CTRL_APE) {
BUG(); /* Should not send command/data after engaging APE */
diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c
index dc7ef95..dbcca28 100644
--- a/drivers/isdn/hisax/hisax_fcpcipnp.c
+++ b/drivers/isdn/hisax/hisax_fcpcipnp.c
@@ -387,8 +387,7 @@ static void hdlc_fill_fifo(struct fritz_
DBG(0x40, "hdlc_fill_fifo");
- if (skb->len == 0)
- BUG();
+ BUG_ON(skb->len == 0);
bcs->ctrl.sr.cmd &= ~HDLC_CMD_XME;
if (bcs->tx_skb->len > bcs->fifo_size) {
@@ -630,9 +629,7 @@ static void fritz_b_l2l1(struct hisax_if
switch (pr) {
case PH_DATA | REQUEST:
- if (bcs->tx_skb)
- BUG();
-
+ BUG_ON(bcs->tx_skb);
bcs->tx_skb = skb;
DBG_SKB(1, skb);
hdlc_fill_fifo(bcs);
diff --git a/drivers/isdn/hisax/hisax_isac.c b/drivers/isdn/hisax/hisax_isac.c
index f4972f6..81eac34 100644
--- a/drivers/isdn/hisax/hisax_isac.c
+++ b/drivers/isdn/hisax/hisax_isac.c
@@ -476,12 +476,10 @@ static void isac_fill_fifo(struct isac *
unsigned char cmd;
u_char *ptr;
- if (!isac->tx_skb)
- BUG();
+ BUG_ON(!isac->tx_skb);
count = isac->tx_skb->len;
- if (count <= 0)
- BUG();
+ BUG_ON(count <= 0);
DBG(DBG_IRQ, "count %d", count);
@@ -859,8 +857,7 @@ void isac_d_l2l1(struct hisax_if *hisax_
dev_kfree_skb(skb);
break;
}
- if (isac->tx_skb)
- BUG();
+ BUG_ON(isac->tx_skb);
isac->tx_skb = skb;
isac_fill_fifo(isac);
diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c
index 657817a..22fd5db 100644
--- a/drivers/isdn/hisax/st5481_b.c
+++ b/drivers/isdn/hisax/st5481_b.c
@@ -356,9 +356,7 @@ void st5481_b_l2l1(struct hisax_if *ifc,
switch (pr) {
case PH_DATA | REQUEST:
- if (bcs->b_out.tx_skb)
- BUG();
-
+ BUG_ON(bcs->b_out.tx_skb);
bcs->b_out.tx_skb = skb;
break;
case PH_ACTIVATE | REQUEST:
diff --git a/drivers/isdn/hisax/st5481_d.c b/drivers/isdn/hisax/st5481_d.c
index 941f702..493dc94 100644
--- a/drivers/isdn/hisax/st5481_d.c
+++ b/drivers/isdn/hisax/st5481_d.c
@@ -596,9 +596,7 @@ void st5481_d_l2l1(struct hisax_if *hisa
break;
case PH_DATA | REQUEST:
DBG(2, "PH_DATA REQUEST len %d", skb->len);
- if (adapter->d_out.tx_skb)
- BUG();
-
+ BUG_ON(adapter->d_out.tx_skb);
adapter->d_out.tx_skb = skb;
FsmEvent(&adapter->d_out.fsm, EV_DOUT_START_XMIT, NULL);
break;
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index b9fed8a..a0927d1 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -974,8 +974,7 @@ void isdn_ppp_receive(isdn_net_dev * net
int slot;
int proto;
- if (net_dev->local->master)
- BUG(); // we're called with the master device always
+ BUG_ON(net_dev->local->master); // we're called with the master device always
slot = lp->ppp_slot;
if (slot < 0 || slot >= ISDN_MAX_CHANNELS) {
@@ -2527,8 +2526,7 @@ static struct sk_buff *isdn_ppp_decompre
printk(KERN_DEBUG "ippp: no decompressor defined!\n");
return skb;
}
- if (!stat) // if we have a compressor, stat has been set as well
- BUG();
+ BUG_ON(!stat); // if we have a compressor, stat has been set as well
if((master && *proto == PPP_COMP) || (!master && *proto == PPP_COMPFRAG) ) {
// compressed packets are compressed by their protocol type
diff --git a/drivers/md/dm-path-selector.c b/drivers/md/dm-path-selector.c
index a28c1c2..f10a0c8 100644
--- a/drivers/md/dm-path-selector.c
+++ b/drivers/md/dm-path-selector.c
@@ -86,8 +86,7 @@ void dm_put_path_selector(struct path_se
if (--psi->use == 0)
module_put(psi->pst.module);
- if (psi->use < 0)
- BUG();
+ BUG_ON(psi->use < 0);
out:
up_read(&_ps_lock);
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 9b1e2f5..907b08d 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -352,8 +352,7 @@ static int open_dev(struct dm_dev *d, de
int r;
- if (d->bdev)
- BUG();
+ BUG_ON(d->bdev);
bdev = open_by_devnum(dev, d->mode);
if (IS_ERR(bdev))
@@ -427,8 +426,7 @@ static int __table_get_device(struct dm_
struct dm_dev *dd;
unsigned int major, minor;
- if (!t)
- BUG();
+ BUG_ON(!t);
if (sscanf(path, "%u:%u", &major, &minor) == 2) {
/* Extract the major/minor numbers */
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 205bb70..0f6bb2e 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -25,9 +25,8 @@ config MTD_JEDECPROBE
compatible with the Common Flash Interface, but will use the common
CFI-targetted flash drivers for any chips which are identified which
are in fact compatible in all but the probe method. This actually
- covers most AMD/Fujitsu-compatible chips, and will shortly cover also
- non-CFI Intel chips (that code is in MTD CVS and should shortly be sent
- for inclusion in Linus' tree)
+ covers most AMD/Fujitsu-compatible chips and also non-CFI
+ Intel chips.
config MTD_GEN_PROBE
tristate
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
index b51c757..efb2216 100644
--- a/drivers/mtd/maps/dilnetpc.c
+++ b/drivers/mtd/maps/dilnetpc.c
@@ -218,8 +218,8 @@ static void dnp_set_vpp(struct map_info
{
if(--vpp_counter == 0)
setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x4);
- else if(vpp_counter < 0)
- BUG();
+ else
+ BUG_ON(vpp_counter < 0);
}
spin_unlock_irq(&dnpc_spin);
}
@@ -240,8 +240,8 @@ static void adnp_set_vpp(struct map_info
{
if(--vpp_counter == 0)
setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x8);
- else if(vpp_counter < 0)
- BUG();
+ else
+ BUG_ON(vpp_counter < 0);
}
spin_unlock_irq(&dnpc_spin);
}
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 7f3ff50..840dd66 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -450,8 +450,7 @@ int deregister_mtd_blktrans(struct mtd_b
kfree(tr->blkcore_priv);
- if (!list_empty(&tr->devs))
- BUG();
+ BUG_ON(!list_empty(&tr->devs));
return 0;
}
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index b1bf8c4..9af8403 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -477,8 +477,7 @@ static int concat_erase(struct mtd_info
}
/* must never happen since size limit has been verified above */
- if (i >= concat->num_subdev)
- BUG();
+ BUG_ON(i >= concat->num_subdev);
/* now do the erase: */
err = 0;
@@ -500,8 +499,7 @@ static int concat_erase(struct mtd_info
if ((err = concat_dev_erase(subdev, erase))) {
/* sanity check: should never happen since
* block alignment has been checked above */
- if (err == -EINVAL)
- BUG();
+ BUG_ON(err == -EINVAL);
if (erase->fail_addr != 0xffffffff)
instr->fail_addr = erase->fail_addr + offset;
break;
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index 2f72010..c1c6f13 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -437,8 +437,7 @@ dasd_forget_ranges(void)
spin_lock(&dasd_devmap_lock);
for (i = 0; i < 256; i++) {
list_for_each_entry_safe(devmap, n, &dasd_hashlists[i], list) {
- if (devmap->device != NULL)
- BUG();
+ BUG_ON(devmap->device != NULL);
list_del(&devmap->list);
kfree(devmap);
}
@@ -547,8 +546,7 @@ dasd_delete_device(struct dasd_device *d
/* First remove device pointer from devmap. */
devmap = dasd_find_busid(device->cdev->dev.bus_id);
- if (IS_ERR(devmap))
- BUG();
+ BUG_ON(IS_ERR(devmap));
spin_lock(&dasd_devmap_lock);
if (devmap->device != device) {
spin_unlock(&dasd_devmap_lock);
diff --git a/fs/buffer.c b/fs/buffer.c
index 3b3ab52..4342ab0 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -796,8 +796,7 @@ void mark_buffer_dirty_inode(struct buff
if (!mapping->assoc_mapping) {
mapping->assoc_mapping = buffer_mapping;
} else {
- if (mapping->assoc_mapping != buffer_mapping)
- BUG();
+ BUG_ON(mapping->assoc_mapping != buffer_mapping);
}
if (list_empty(&bh->b_assoc_buffers)) {
spin_lock(&buffer_mapping->private_lock);
@@ -1114,8 +1113,7 @@ grow_dev_page(struct block_device *bdev,
if (!page)
return NULL;
- if (!PageLocked(page))
- BUG();
+ BUG_ON(!PageLocked(page));
if (page_has_buffers(page)) {
bh = page_buffers(page);
@@ -1522,8 +1520,7 @@ void set_bh_page(struct buffer_head *bh,
struct page *page, unsigned long offset)
{
bh->b_page = page;
- if (offset >= PAGE_SIZE)
- BUG();
+ BUG_ON(offset >= PAGE_SIZE);
if (PageHighMem(page))
/*
* This catches illegal uses and preserves the offset:
diff --git a/fs/dcache.c b/fs/dcache.c
index 9395846..0778f49 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -34,7 +34,6 @@
#include <linux/swap.h>
#include <linux/bootmem.h>
-/* #define DCACHE_DEBUG 1 */
int sysctl_vfs_cache_pressure = 100;
EXPORT_SYMBOL_GPL(sysctl_vfs_cache_pressure);
@@ -603,10 +602,6 @@ resume:
*/
if (!list_empty(&dentry->d_subdirs)) {
this_parent = dentry;
-#ifdef DCACHE_DEBUG
-printk(KERN_DEBUG "select_parent: descending to %s/%s, found=%d\n",
-dentry->d_parent->d_name.name, dentry->d_name.name, found);
-#endif
goto repeat;
}
}
@@ -616,10 +611,6 @@ dentry->d_parent->d_name.name, dentry->d
if (this_parent != parent) {
next = this_parent->d_u.d_child.next;
this_parent = this_parent->d_parent;
-#ifdef DCACHE_DEBUG
-printk(KERN_DEBUG "select_parent: ascending to %s/%s, found=%d\n",
-this_parent->d_parent->d_name.name, this_parent->d_name.name, found);
-#endif
goto resume;
}
out:
@@ -798,7 +789,7 @@ struct dentry *d_alloc_name(struct dentr
void d_instantiate(struct dentry *entry, struct inode * inode)
{
- if (!list_empty(&entry->d_alias)) BUG();
+ BUG_ON(!list_empty(&entry->d_alias));
spin_lock(&dcache_lock);
if (inode)
list_add(&entry->d_alias, &inode->i_dentry);
diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index b3dbd71..0165388 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -416,8 +416,7 @@ void ext2_set_link(struct inode *dir, st
lock_page(page);
err = page->mapping->a_ops->prepare_write(NULL, page, from, to);
- if (err)
- BUG();
+ BUG_ON(err);
de->inode = cpu_to_le32(inode->i_ino);
ext2_set_de_type (de, inode);
err = ext2_commit_chunk(page, from, to);
@@ -554,8 +553,7 @@ int ext2_delete_entry (struct ext2_dir_e
from = (char*)pde - (char*)page_address(page);
lock_page(page);
err = mapping->a_ops->prepare_write(NULL, page, from, to);
- if (err)
- BUG();
+ BUG_ON(err);
if (pde)
pde->rec_len = cpu_to_le16(to-from);
dir->inode = 0;
diff --git a/fs/hfs/bnode.c b/fs/hfs/bnode.c
index a7a7d77..1e44dcf 100644
--- a/fs/hfs/bnode.c
+++ b/fs/hfs/bnode.c
@@ -306,8 +306,7 @@ void hfs_bnode_unhash(struct hfs_bnode *
for (p = &node->tree->node_hash[hfs_bnode_hash(node->this)];
*p && *p != node; p = &(*p)->next_hash)
;
- if (!*p)
- BUG();
+ BUG_ON(!*p);
*p = node->next_hash;
node->tree->node_hash_cnt--;
}
@@ -415,8 +414,7 @@ struct hfs_bnode *hfs_bnode_create(struc
spin_lock(&tree->hash_lock);
node = hfs_bnode_findhash(tree, num);
spin_unlock(&tree->hash_lock);
- if (node)
- BUG();
+ BUG_ON(node);
node = __hfs_bnode_create(tree, num);
if (!node)
return ERR_PTR(-ENOMEM);
@@ -459,8 +457,7 @@ void hfs_bnode_put(struct hfs_bnode *nod
dprint(DBG_BNODE_REFS, "put_node(%d:%d): %d\n",
node->tree->cnid, node->this, atomic_read(&node->refcnt));
- if (!atomic_read(&node->refcnt))
- BUG();
+ BUG_ON(!atomic_read(&node->refcnt));
if (!atomic_dec_and_lock(&node->refcnt, &tree->hash_lock))
return;
for (i = 0; i < tree->pages_per_bnode; i++) {
diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index 7bb11ed..d20131c 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -36,8 +36,7 @@ struct hfs_btree *hfs_btree_open(struct
tree->inode = iget_locked(sb, id);
if (!tree->inode)
goto free_tree;
- if (!(tree->inode->i_state & I_NEW))
- BUG();
+ BUG_ON(!(tree->inode->i_state & I_NEW));
{
struct hfs_mdb *mdb = HFS_SB(sb)->mdb;
HFS_I(tree->inode)->flags = 0;
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 8b671fe..adb7cad 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -23,7 +23,6 @@ int root_mountflags = MS_RDONLY | MS_SIL
char * __initdata root_device_name;
static char __initdata saved_root_name[64];
-/* this is initialized in init/main.c */
dev_t ROOT_DEV;
static int __init load_ramdisk(char *str)
diff --git a/ipc/sem.c b/ipc/sem.c
index 59696a8..18a78fe 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -227,8 +227,7 @@ asmlinkage long sys_semget (key_t key, i
err = -EEXIST;
} else {
sma = sem_lock(id);
- if(sma==NULL)
- BUG();
+ BUG_ON(sma==NULL);
if (nsems > sma->sem_nsems)
err = -EINVAL;
else if (ipcperms(&sma->sem_perm, semflg))
@@ -1181,8 +1180,7 @@ retry_undos:
sma = sem_lock(semid);
if(sma==NULL) {
- if(queue.prev != NULL)
- BUG();
+ BUG_ON(queue.prev != NULL);
error = -EIDRM;
goto out_free;
}
diff --git a/kernel/fork.c b/kernel/fork.c
index a020639..d93ab2b 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -769,8 +769,7 @@ int unshare_files(void)
struct files_struct *files = current->files;
int rc;
- if(!files)
- BUG();
+ BUG_ON(!files);
/* This can race but the race causes us to copy when we don't
need to and drop the copy */
diff --git a/mm/memory.c b/mm/memory.c
index e347e10..d90ff9d 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2352,10 +2352,8 @@ int make_pages_present(unsigned long add
if (!vma)
return -1;
write = (vma->vm_flags & VM_WRITE) != 0;
- if (addr >= end)
- BUG();
- if (end > vma->vm_end)
- BUG();
+ BUG_ON(addr >= end);
+ BUG_ON(end > vma->vm_end);
len = (end+PAGE_SIZE-1)/PAGE_SIZE-addr/PAGE_SIZE;
ret = get_user_pages(current, current->mm, addr,
len, write, 0, NULL, NULL);
diff --git a/mm/mempool.c b/mm/mempool.c
index f71893e..9ef13dd 100644
--- a/mm/mempool.c
+++ b/mm/mempool.c
@@ -183,8 +183,8 @@ EXPORT_SYMBOL(mempool_resize);
*/
void mempool_destroy(mempool_t *pool)
{
- if (pool->curr_nr != pool->min_nr)
- BUG(); /* There were outstanding elements */
+ /* Check for outstanding elements */
+ BUG_ON(pool->curr_nr != pool->min_nr);
free_pool(pool);
}
EXPORT_SYMBOL(mempool_destroy);
^ permalink raw reply related [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-03-25 10:17 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-03-25 10:17 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Amos Waterland:
The comment describing how MS_ASYNC works in msync.c is confusing
Andrzej Zaborowski:
Fix simple typos
Baruch Even:
rcu: undeclared variable used in documentation
Eric Sesterhenn:
BUG_ON() Conversion in md/bitmap.c
BUG_ON() Conversion in md/dm-hw-handler.c
BUG_ON() Conversion in input/serio/hil_mlc.c
BUG_ON() Conversion in fs/binfmt_elf_fdpic.c
BUG_ON() Conversion in fs/coda/
BUG_ON() Conversion in block/elevator.c
BUG_ON() Conversion in ipc/msg.c
BUG_ON() Conversion in kernel/cpu.c
BUG_ON() Conversion in lib/swiotlb.c
BUG_ON() Conversion in drivers/s390/block/dasd.c
BUG_ON() Conversion in sound/sparc/cs4231.c
BUG_ON() Conversion in drivers/block/
BUG_ON() Conversion in drivers/parisc/
BUG_ON() Conversion in drivers/video/
Jim Cromie:
Re-alphabetize a couple MAINTANTER entries.
tabify drivers/char/Makefile
Michael Owen:
typo patch for fs/ufs/super.c
Uwe Zeisberger:
fix typos "wich" -> "which"
Documentation/RCU/whatisRCU.txt | 4 -
Documentation/arm/Booting | 2
Documentation/arm/README | 2
Documentation/arm/Setup | 2
Documentation/filesystems/proc.txt | 6 -
Documentation/networking/packet_mmap.txt | 10 +-
MAINTAINERS | 12 +--
block/elevator.c | 3
drivers/acpi/Kconfig | 3
drivers/block/DAC960.c | 3
drivers/block/cciss.c | 3
drivers/block/cciss_scsi.c | 2
drivers/block/cpqarray.c | 3
drivers/char/Makefile | 83 +++++++++++------------
drivers/input/serio/hil_mlc.c | 2
drivers/isdn/i4l/isdn_x25iface.c | 2
drivers/md/bitmap.c | 2
drivers/md/dm-hw-handler.c | 3
drivers/parisc/sba_iommu.c | 10 --
drivers/parisc/superio.c | 7 -
drivers/s390/block/dasd.c | 10 +-
drivers/serial/mpc52xx_uart.c | 2
drivers/usb/serial/option.c | 2
drivers/video/bw2.c | 3
drivers/video/ffb.c | 3
drivers/video/sstfb.c | 2
drivers/w1/masters/matrox_w1.c | 2
fs/befs/datastream.c | 2
fs/binfmt_elf_fdpic.c | 3
fs/coda/cache.c | 2
fs/coda/cnode.c | 3
fs/ufs/super.c | 2
include/linux/timer.h | 6 -
ipc/msg.c | 3
kernel/cpu.c | 3
lib/swiotlb.c | 32 +++-----
mm/msync.c | 2
scripts/Makefile.modpost | 2
sound/sparc/cs4231.c | 6 -
39 files changed, 114 insertions(+), 140 deletions(-)
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 5ed85af..b4ea51a 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -360,7 +360,7 @@ uses of RCU may be found in listRCU.txt,
struct foo *new_fp;
struct foo *old_fp;
- new_fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+ new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
spin_lock(&foo_mutex);
old_fp = gbl_foo;
*new_fp = *old_fp;
@@ -461,7 +461,7 @@ The foo_update_a() function might then b
struct foo *new_fp;
struct foo *old_fp;
- new_fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+ new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
spin_lock(&foo_mutex);
old_fp = gbl_foo;
*new_fp = *old_fp;
diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting
index fad566b..7685029 100644
--- a/Documentation/arm/Booting
+++ b/Documentation/arm/Booting
@@ -118,7 +118,7 @@ to store page tables. The recommended p
In either case, the following conditions must be met:
-- Quiesce all DMA capable devicess so that memory does not get
+- Quiesce all DMA capable devices so that memory does not get
corrupted by bogus network packets or disk data. This will save
you many hours of debug.
diff --git a/Documentation/arm/README b/Documentation/arm/README
index 5ed6f35..9b9c822 100644
--- a/Documentation/arm/README
+++ b/Documentation/arm/README
@@ -89,7 +89,7 @@ Modules
Although modularisation is supported (and required for the FP emulator),
each module on an ARM2/ARM250/ARM3 machine when is loaded will take
memory up to the next 32k boundary due to the size of the pages.
- Therefore, modularisation on these machines really worth it?
+ Therefore, is modularisation on these machines really worth it?
However, ARM6 and up machines allow modules to take multiples of 4k, and
as such Acorn RiscPCs and other architectures using these processors can
diff --git a/Documentation/arm/Setup b/Documentation/arm/Setup
index 0abd072..0cb1e64 100644
--- a/Documentation/arm/Setup
+++ b/Documentation/arm/Setup
@@ -58,7 +58,7 @@ below:
video_y
This describes the character position of cursor on VGA console, and
- is otherwise unused. (should not used for other console types, and
+ is otherwise unused. (should not be used for other console types, and
should not be used for other purposes).
memc_control_reg
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 944cf10..99902ae 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -121,7 +121,7 @@ Table 1-1: Process specific entries in /
..............................................................................
File Content
cmdline Command line arguments
- cpu Current and last cpu in wich it was executed (2.4)(smp)
+ cpu Current and last cpu in which it was executed (2.4)(smp)
cwd Link to the current working directory
environ Values of environment variables
exe Link to the executable of this process
@@ -309,13 +309,13 @@ is the same by default:
> cat /proc/irq/0/smp_affinity
ffffffff
-It's a bitmask, in wich you can specify wich CPUs can handle the IRQ, you can
+It's a bitmask, in which you can specify which CPUs can handle the IRQ, you can
set it by doing:
> echo 1 > /proc/irq/prof_cpu_mask
This means that only the first CPU will handle the IRQ, but you can also echo 5
-wich means that only the first and fourth CPU can handle the IRQ.
+which means that only the first and fourth CPU can handle the IRQ.
The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
between all the CPUs which are allowed to handle it. As usual the kernel has
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index 8d4cf78..4fc8e98 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -40,7 +40,7 @@ network interface card supports some sor
+ How to use CONFIG_PACKET_MMAP
--------------------------------------------------------------------------------
-From the user standpoint, you should use the higher level libpcap library, wich
+From the user standpoint, you should use the higher level libpcap library, which
is a de facto standard, portable across nearly all operating systems
including Win32.
@@ -217,8 +217,8 @@ called pg_vec, its size limits the numbe
kmalloc allocates any number of bytes of phisically contiguous memory from
a pool of pre-determined sizes. This pool of memory is mantained by the slab
-allocator wich is at the end the responsible for doing the allocation and
-hence wich imposes the maximum memory that kmalloc can allocate.
+allocator which is at the end the responsible for doing the allocation and
+hence which imposes the maximum memory that kmalloc can allocate.
In a 2.4/2.6 kernel and the i386 architecture, the limit is 131072 bytes. The
predetermined sizes that kmalloc uses can be checked in the "size-<bytes>"
@@ -254,7 +254,7 @@ and, the number of frames be
<block number> * <block size> / <frame size>
-Suposse the following parameters, wich apply for 2.6 kernel and an
+Suposse the following parameters, which apply for 2.6 kernel and an
i386 architecture:
<size-max> = 131072 bytes
@@ -360,7 +360,7 @@ TP_STATUS_LOSING : indicates there
statistics where checked with getsockopt() and
the PACKET_STATISTICS option.
-TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets wich
+TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets which
it's checksum will be done in hardware. So while
reading the packet we should not try to check the
checksum.
diff --git a/MAINTAINERS b/MAINTAINERS
index 5b6a014..f854f31 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2013,12 +2013,6 @@ L: parisc-linux@parisc-linux.org
W: http://www.parisc-linux.org/
S: Maintained
-PERSONALITY HANDLING
-P: Christoph Hellwig
-M: hch@infradead.org
-L: linux-abi-devel@lists.sourceforge.net
-S: Maintained
-
PCI ERROR RECOVERY
P: Linas Vepstas
M: linas@austin.ibm.com
@@ -2069,6 +2063,12 @@ M: tsbogend@alpha.franken.de
L: netdev@vger.kernel.org
S: Maintained
+PERSONALITY HANDLING
+P: Christoph Hellwig
+M: hch@infradead.org
+L: linux-abi-devel@lists.sourceforge.net
+S: Maintained
+
PHRAM MTD DRIVER
P: Jörn Engel
M: joern@wh.fh-wedel.de
diff --git a/block/elevator.c b/block/elevator.c
index 5e558c4..56c2ed0 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -728,8 +728,7 @@ void elv_unregister_queue(struct request
int elv_register(struct elevator_type *e)
{
spin_lock_irq(&elv_list_lock);
- if (elevator_find(e->elevator_name))
- BUG();
+ BUG_ON(elevator_find(e->elevator_name));
list_add_tail(&e->list, &elv_list);
spin_unlock_irq(&elv_list_lock);
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 82710ae..5cb9630 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -256,7 +256,8 @@ config ACPI_CUSTOM_DSDT_FILE
depends on ACPI_CUSTOM_DSDT
default ""
help
- Enter the full path name to the file wich includes the AmlCode declaration.
+ Enter the full path name to the file which includes the AmlCode
+ declaration.
config ACPI_BLACKLIST_YEAR
int "Disable ACPI for systems before Jan 1st this year" if X86_32
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 37b8cda..9bdea2a 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -228,8 +228,7 @@ static void *slice_dma_loaf(struct dma_l
void *cpu_end = loaf->cpu_free + len;
void *cpu_addr = loaf->cpu_free;
- if (cpu_end > loaf->cpu_base + loaf->length)
- BUG();
+ BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
*dma_handle = loaf->dma_free;
loaf->cpu_free = cpu_end;
loaf->dma_free += len;
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 1f28909..71ec9e6 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -2361,8 +2361,7 @@ queue:
if (!creq)
goto startio;
- if (creq->nr_phys_segments > MAXSGENTRIES)
- BUG();
+ BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);
if (( c = cmd_alloc(h, 1)) == NULL)
goto full;
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 9e35de0..0e66e90 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -1316,7 +1316,7 @@ cciss_scsi_queue_command (struct scsi_cm
cp->Request.Timeout = 0;
memset(cp->Request.CDB, 0, sizeof(cp->Request.CDB));
- if (cmd->cmd_len > sizeof(cp->Request.CDB)) BUG();
+ BUG_ON(cmd->cmd_len > sizeof(cp->Request.CDB));
cp->Request.CDBLen = cmd->cmd_len;
memcpy(cp->Request.CDB, cmd->cmnd, cmd->cmd_len);
cp->Request.Type.Type = TYPE_CMD;
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 862b9ab..b6ea2f0 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -906,8 +906,7 @@ queue_next:
if (!creq)
goto startio;
- if (creq->nr_phys_segments > SG_MAX)
- BUG();
+ BUG_ON(creq->nr_phys_segments > SG_MAX);
if ((c = cmd_alloc(h,1)) == NULL)
goto startio;
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 090d154..b2a1124 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -45,56 +45,57 @@ obj-$(CONFIG_HVC_CONSOLE) += hvc_console
obj-$(CONFIG_RAW_DRIVER) += raw.o
obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o
obj-$(CONFIG_MMTIMER) += mmtimer.o
-obj-$(CONFIG_VIOCONS) += viocons.o
+obj-$(CONFIG_VIOCONS) += viocons.o
obj-$(CONFIG_VIOTAPE) += viotape.o
obj-$(CONFIG_HVCS) += hvcs.o
obj-$(CONFIG_SGI_MBCS) += mbcs.o
-obj-$(CONFIG_PRINTER) += lp.o
-obj-$(CONFIG_TIPAR) += tipar.o
+obj-$(CONFIG_PRINTER) += lp.o
+obj-$(CONFIG_TIPAR) += tipar.o
-obj-$(CONFIG_DTLK) += dtlk.o
-obj-$(CONFIG_R3964) += n_r3964.o
-obj-$(CONFIG_APPLICOM) += applicom.o
-obj-$(CONFIG_SONYPI) += sonypi.o
-obj-$(CONFIG_RTC) += rtc.o
-obj-$(CONFIG_HPET) += hpet.o
-obj-$(CONFIG_GEN_RTC) += genrtc.o
-obj-$(CONFIG_EFI_RTC) += efirtc.o
-obj-$(CONFIG_SGI_DS1286) += ds1286.o
-obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
-obj-$(CONFIG_DS1302) += ds1302.o
-obj-$(CONFIG_S3C2410_RTC) += s3c2410-rtc.o
-obj-$(CONFIG_RTC_VR41XX) += vr41xx_rtc.o
+obj-$(CONFIG_DTLK) += dtlk.o
+obj-$(CONFIG_R3964) += n_r3964.o
+obj-$(CONFIG_APPLICOM) += applicom.o
+obj-$(CONFIG_SONYPI) += sonypi.o
+obj-$(CONFIG_RTC) += rtc.o
+obj-$(CONFIG_HPET) += hpet.o
+obj-$(CONFIG_GEN_RTC) += genrtc.o
+obj-$(CONFIG_EFI_RTC) += efirtc.o
+obj-$(CONFIG_SGI_DS1286) += ds1286.o
+obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
+obj-$(CONFIG_DS1302) += ds1302.o
+obj-$(CONFIG_S3C2410_RTC) += s3c2410-rtc.o
+obj-$(CONFIG_RTC_VR41XX) += vr41xx_rtc.o
ifeq ($(CONFIG_GENERIC_NVRAM),y)
- obj-$(CONFIG_NVRAM) += generic_nvram.o
+ obj-$(CONFIG_NVRAM) += generic_nvram.o
else
- obj-$(CONFIG_NVRAM) += nvram.o
+ obj-$(CONFIG_NVRAM) += nvram.o
endif
-obj-$(CONFIG_TOSHIBA) += toshiba.o
-obj-$(CONFIG_I8K) += i8k.o
-obj-$(CONFIG_DS1620) += ds1620.o
-obj-$(CONFIG_HW_RANDOM) += hw_random.o
-obj-$(CONFIG_FTAPE) += ftape/
-obj-$(CONFIG_COBALT_LCD) += lcd.o
-obj-$(CONFIG_PPDEV) += ppdev.o
-obj-$(CONFIG_NWBUTTON) += nwbutton.o
-obj-$(CONFIG_NWFLASH) += nwflash.o
-obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
-obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o
-obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
-obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
-obj-$(CONFIG_TELCLOCK) += tlclk.o
-
-obj-$(CONFIG_WATCHDOG) += watchdog/
-obj-$(CONFIG_MWAVE) += mwave/
-obj-$(CONFIG_AGP) += agp/
-obj-$(CONFIG_DRM) += drm/
-obj-$(CONFIG_PCMCIA) += pcmcia/
-obj-$(CONFIG_IPMI_HANDLER) += ipmi/
+obj-$(CONFIG_TOSHIBA) += toshiba.o
+obj-$(CONFIG_I8K) += i8k.o
+obj-$(CONFIG_DS1620) += ds1620.o
+obj-$(CONFIG_HW_RANDOM) += hw_random.o
+obj-$(CONFIG_FTAPE) += ftape/
+obj-$(CONFIG_COBALT_LCD) += lcd.o
+obj-$(CONFIG_PPDEV) += ppdev.o
+obj-$(CONFIG_NWBUTTON) += nwbutton.o
+obj-$(CONFIG_NWFLASH) += nwflash.o
+obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
+obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o
+obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
+obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
+obj-$(CONFIG_TELCLOCK) += tlclk.o
+
+obj-$(CONFIG_WATCHDOG) += watchdog/
+obj-$(CONFIG_MWAVE) += mwave/
+obj-$(CONFIG_AGP) += agp/
+obj-$(CONFIG_DRM) += drm/
+obj-$(CONFIG_PCMCIA) += pcmcia/
+obj-$(CONFIG_IPMI_HANDLER) += ipmi/
+
+obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o
+obj-$(CONFIG_TCG_TPM) += tpm/
-obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o
-obj-$(CONFIG_TCG_TPM) += tpm/
# Files generated that shall be removed upon make clean
clean-files := consolemap_deftbl.c defkeymap.c qtronixmap.c
diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
index 5704204..ea49978 100644
--- a/drivers/input/serio/hil_mlc.c
+++ b/drivers/input/serio/hil_mlc.c
@@ -556,7 +556,7 @@ static inline void hilse_setup_input(hil
do_gettimeofday(&(mlc->instart));
mlc->icount = 15;
memset(mlc->ipacket, 0, 16 * sizeof(hil_packet));
- if (down_trylock(&(mlc->isem))) BUG();
+ BUG_ON(down_trylock(&(mlc->isem)));
return;
}
diff --git a/drivers/isdn/i4l/isdn_x25iface.c b/drivers/isdn/i4l/isdn_x25iface.c
index edf14a2..743ac40 100644
--- a/drivers/isdn/i4l/isdn_x25iface.c
+++ b/drivers/isdn/i4l/isdn_x25iface.c
@@ -7,7 +7,7 @@
*
* stuff needed to support the Linux X.25 PLP code on top of devices that
* can provide a lab_b service using the concap_proto mechanism.
- * This module supports a network interface wich provides lapb_sematics
+ * This module supports a network interface which provides lapb_sematics
* -- as defined in Documentation/networking/x25-iface.txt -- to
* the upper layer and assumes that the lower layer provides a reliable
* data link service by means of the concap_device_ops callbacks.
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index eae4473..979e8ca 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1309,7 +1309,7 @@ int bitmap_startwrite(struct bitmap *bit
case 1:
*bmc = 2;
}
- if ((*bmc & COUNTER_MAX) == COUNTER_MAX) BUG();
+ BUG_ON((*bmc & COUNTER_MAX) == COUNTER_MAX);
(*bmc)++;
spin_unlock_irq(&bitmap->lock);
diff --git a/drivers/md/dm-hw-handler.c b/drivers/md/dm-hw-handler.c
index 4cc0010..baafaab 100644
--- a/drivers/md/dm-hw-handler.c
+++ b/drivers/md/dm-hw-handler.c
@@ -83,8 +83,7 @@ void dm_put_hw_handler(struct hw_handler
if (--hwhi->use == 0)
module_put(hwhi->hwht.module);
- if (hwhi->use < 0)
- BUG();
+ BUG_ON(hwhi->use < 0);
out:
up_read(&_hwh_lock);
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 5d47c59..0821747 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -1724,9 +1724,7 @@ printk("sba_hw_init(): mem_boot 0x%x 0x%
sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfef00000UL;
sba_dev->chip_resv.end = PCI_F_EXTEND | (0xff000000UL - 1) ;
err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
- if (err < 0) {
- BUG();
- }
+ BUG_ON(err < 0);
} else if (IS_PLUTO(sba_dev->iodc)) {
int err;
@@ -2185,8 +2183,7 @@ void sba_directed_lmmio(struct parisc_de
int i;
int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1)); /* rope # */
- if ((t!=HPHW_IOA) && (t!=HPHW_BCPORT))
- BUG();
+ BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT));
r->start = r->end = 0;
@@ -2228,8 +2225,7 @@ void sba_distributed_lmmio(struct parisc
int base, size;
int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1)); /* rope # */
- if ((t!=HPHW_IOA) && (t!=HPHW_BCPORT))
- BUG();
+ BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT));
r->start = r->end = 0;
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index ba971fe..ad6d3b2 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -157,8 +157,8 @@ superio_init(struct pci_dev *pcidev)
if (sio->suckyio_irq_enabled)
return;
- if (!pdev) BUG();
- if (!sio->usb_pdev) BUG();
+ BUG_ON(!pdev);
+ BUG_ON(!sio->usb_pdev);
/* use the IRQ iosapic found for USB INT D... */
pdev->irq = sio->usb_pdev->irq;
@@ -474,8 +474,7 @@ superio_probe(struct pci_dev *dev, const
dev->subsystem_vendor, dev->subsystem_device,
dev->class);
- if (!sio->suckyio_irq_enabled)
- BUG(); /* Enabled by PCI_FIXUP_FINAL */
+ BUG_ON(!sio->suckyio_irq_enabled); /* Enabled by PCI_FIXUP_FINAL */
if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) { /* Function 1 */
superio_parport_init();
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index dfe542b..0eab05a 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -542,9 +542,8 @@ dasd_kmalloc_request(char *magic, int cp
struct dasd_ccw_req *cqr;
/* Sanity checks */
- if ( magic == NULL || datasize > PAGE_SIZE ||
- (cplength*sizeof(struct ccw1)) > PAGE_SIZE)
- BUG();
+ BUG_ON( magic == NULL || datasize > PAGE_SIZE ||
+ (cplength*sizeof(struct ccw1)) > PAGE_SIZE);
cqr = kzalloc(sizeof(struct dasd_ccw_req), GFP_ATOMIC);
if (cqr == NULL)
@@ -584,9 +583,8 @@ dasd_smalloc_request(char *magic, int cp
int size;
/* Sanity checks */
- if ( magic == NULL || datasize > PAGE_SIZE ||
- (cplength*sizeof(struct ccw1)) > PAGE_SIZE)
- BUG();
+ BUG_ON( magic == NULL || datasize > PAGE_SIZE ||
+ (cplength*sizeof(struct ccw1)) > PAGE_SIZE);
size = (sizeof(struct dasd_ccw_req) + 7L) & -8L;
if (cplength > 0)
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 928e6cf..6459edc 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -40,7 +40,7 @@
* and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
* so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
* fpr the console code : without this 1:1 mapping, at early boot time, when we
- * are parsing the kernel args console=ttyPSC?, we wouldn't know wich PSC it
+ * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
* will be mapped to.
*/
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a8455c9..495db57 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -102,7 +102,7 @@ static struct usb_driver option_driver =
.no_dynamic_id = 1,
};
-/* The card has three separate interfaces, wich the serial driver
+/* The card has three separate interfaces, which the serial driver
* recognizes separately, thus num_port=1.
*/
static struct usb_serial_driver option_3port_device = {
diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c
index c029db4..6577fdf 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/bw2.c
@@ -327,8 +327,7 @@ static void bw2_init_one(struct sbus_dev
} else
#else
{
- if (!sdev)
- BUG();
+ BUG_ON(!sdev);
all->par.physbase = sdev->reg_addrs[0].phys_addr;
resp = &sdev->resource[0];
sbusfb_fill_var(&all->info.var, (sdev ? sdev->prom_node : 0), 1);
diff --git a/drivers/video/ffb.c b/drivers/video/ffb.c
index 9c9b21d..7633e41 100644
--- a/drivers/video/ffb.c
+++ b/drivers/video/ffb.c
@@ -466,8 +466,7 @@ static void ffb_fillrect(struct fb_info
unsigned long flags;
u32 fg;
- if (rect->rop != ROP_COPY && rect->rop != ROP_XOR)
- BUG();
+ BUG_ON(rect->rop != ROP_COPY && rect->rop != ROP_XOR);
fg = ((u32 *)info->pseudo_palette)[rect->color];
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index 99921df..8c1a8b5 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -32,7 +32,7 @@
-TODO: at one time or another test that the mode is acceptable by the monitor
-ASK: Can I choose different ordering for the color bitfields (rgba argb ...)
- wich one should i use ? is there any preferred one ? It seems ARGB is
+ which one should i use ? is there any preferred one ? It seems ARGB is
the one ...
-TODO: in set_var check the validity of timings (hsync vsync)...
-TODO: check and recheck the use of sst_wait_idle : we don't flush the fifo via
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index 591809c..2788b8c 100644
--- a/drivers/w1/masters/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -98,7 +98,7 @@ static void matrox_w1_write_ddc_bit(void
*
* Using tristate pins, since i can't find any open-drain pin in whole motherboard.
* Unfortunately we can't connect to Intel's 82801xx IO controller
- * since we don't know motherboard schema, wich has pretty unused(may be not) GPIO.
+ * since we don't know motherboard schema, which has pretty unused(may be not) GPIO.
*
* I've heard that PIIX also has open drain pin.
*
diff --git a/fs/befs/datastream.c b/fs/befs/datastream.c
index 785f6b2..b7d6b92 100644
--- a/fs/befs/datastream.c
+++ b/fs/befs/datastream.c
@@ -118,7 +118,7 @@ befs_fblock2brun(struct super_block *sb,
* befs_read_lsmylink - read long symlink from datastream.
* @sb: Filesystem superblock
* @ds: Datastrem to read from
- * @buf: Buffer in wich to place long symlink data
+ * @buf: Buffer in which to place long symlink data
* @len: Length of the long symlink in bytes
*
* Returns the number of bytes read
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 5b3076e..a2e48c9 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -572,8 +572,7 @@ static int create_elf_fdpic_tables(struc
csp -= sizeof(unsigned long);
__put_user(bprm->argc, (unsigned long *) csp);
- if (csp != sp)
- BUG();
+ BUG_ON(csp != sp);
/* fill in the argv[] array */
#ifdef CONFIG_MMU
diff --git a/fs/coda/cache.c b/fs/coda/cache.c
index c607d92..5d05271 100644
--- a/fs/coda/cache.c
+++ b/fs/coda/cache.c
@@ -51,7 +51,7 @@ void coda_cache_clear_all(struct super_b
struct coda_sb_info *sbi;
sbi = coda_sbp(sb);
- if (!sbi) BUG();
+ BUG_ON(!sbi);
atomic_inc(&permission_epoch);
}
diff --git a/fs/coda/cnode.c b/fs/coda/cnode.c
index 23aeef5..4c9fecb 100644
--- a/fs/coda/cnode.c
+++ b/fs/coda/cnode.c
@@ -120,8 +120,7 @@ void coda_replace_fid(struct inode *inod
cii = ITOC(inode);
- if (!coda_fideq(&cii->c_fid, oldfid))
- BUG();
+ BUG_ON(!coda_fideq(&cii->c_fid, oldfid));
/* replace fid and rehash inode */
/* XXX we probably need to hold some lock here! */
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index d257644..db98a4c 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -575,7 +575,7 @@ static int ufs_fill_super(struct super_b
if (!silent)
printk("You didn't specify the type of your ufs filesystem\n\n"
"mount -t ufs -o ufstype="
- "sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|netxstep-cd|openstep ...\n\n"
+ "sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...\n\n"
">>>WARNING<<< Wrong ufstype may corrupt your filesystem, "
"default is ufstype=old\n");
ufs_set_opt (sbi->s_mount_opt, UFSTYPE_OLD);
diff --git a/include/linux/timer.h b/include/linux/timer.h
index 9b9877f..ee5a09e 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -69,13 +69,13 @@ extern unsigned long next_timer_interrup
* @timer: the timer to be added
*
* The kernel will do a ->function(->data) callback from the
- * timer interrupt at the ->expired point in the future. The
+ * timer interrupt at the ->expires point in the future. The
* current time is 'jiffies'.
*
- * The timer's ->expired, ->function (and if the handler uses it, ->data)
+ * The timer's ->expires, ->function (and if the handler uses it, ->data)
* fields must be set prior calling this function.
*
- * Timers with an ->expired field in the past will be executed in the next
+ * Timers with an ->expires field in the past will be executed in the next
* timer tick.
*/
static inline void add_timer(struct timer_list *timer)
diff --git a/ipc/msg.c b/ipc/msg.c
index fbf7570..60c1e5c 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -220,8 +220,7 @@ asmlinkage long sys_msgget (key_t key, i
ret = -EEXIST;
} else {
msq = msg_lock(id);
- if(msq==NULL)
- BUG();
+ BUG_ON(msq==NULL);
if (ipcperms(&msq->q_perm, msgflg))
ret = -EACCES;
else {
diff --git a/kernel/cpu.c b/kernel/cpu.c
index e882c6b..8be22bd 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -223,8 +223,7 @@ int __devinit cpu_up(unsigned int cpu)
ret = __cpu_up(cpu);
if (ret != 0)
goto out_notify;
- if (!cpu_online(cpu))
- BUG();
+ BUG_ON(!cpu_online(cpu));
/* Now call notifier in preparation. */
notifier_call_chain(&cpu_chain, CPU_ONLINE, hcpu);
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 0af497b..1062578 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -296,8 +296,7 @@ map_single(struct device *hwdev, char *b
else
stride = 1;
- if (!nslots)
- BUG();
+ BUG_ON(!nslots);
/*
* Find suitable number of IO TLB entries size that will fit this
@@ -416,14 +415,14 @@ sync_single(struct device *hwdev, char *
case SYNC_FOR_CPU:
if (likely(dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL))
memcpy(buffer, dma_addr, size);
- else if (dir != DMA_TO_DEVICE)
- BUG();
+ else
+ BUG_ON(dir != DMA_TO_DEVICE);
break;
case SYNC_FOR_DEVICE:
if (likely(dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
memcpy(dma_addr, buffer, size);
- else if (dir != DMA_FROM_DEVICE)
- BUG();
+ else
+ BUG_ON(dir != DMA_FROM_DEVICE);
break;
default:
BUG();
@@ -529,8 +528,7 @@ swiotlb_map_single(struct device *hwdev,
unsigned long dev_addr = virt_to_phys(ptr);
void *map;
- if (dir == DMA_NONE)
- BUG();
+ BUG_ON(dir == DMA_NONE);
/*
* If the pointer passed in happens to be in the device's DMA window,
* we can safely return the device addr and not worry about bounce
@@ -592,8 +590,7 @@ swiotlb_unmap_single(struct device *hwde
{
char *dma_addr = phys_to_virt(dev_addr);
- if (dir == DMA_NONE)
- BUG();
+ BUG_ON(dir == DMA_NONE);
if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
unmap_single(hwdev, dma_addr, size, dir);
else if (dir == DMA_FROM_DEVICE)
@@ -616,8 +613,7 @@ swiotlb_sync_single(struct device *hwdev
{
char *dma_addr = phys_to_virt(dev_addr);
- if (dir == DMA_NONE)
- BUG();
+ BUG_ON(dir == DMA_NONE);
if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
sync_single(hwdev, dma_addr, size, dir, target);
else if (dir == DMA_FROM_DEVICE)
@@ -648,8 +644,7 @@ swiotlb_sync_single_range(struct device
{
char *dma_addr = phys_to_virt(dev_addr) + offset;
- if (dir == DMA_NONE)
- BUG();
+ BUG_ON(dir == DMA_NONE);
if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
sync_single(hwdev, dma_addr, size, dir, target);
else if (dir == DMA_FROM_DEVICE)
@@ -696,8 +691,7 @@ swiotlb_map_sg(struct device *hwdev, str
unsigned long dev_addr;
int i;
- if (dir == DMA_NONE)
- BUG();
+ BUG_ON(dir == DMA_NONE);
for (i = 0; i < nelems; i++, sg++) {
addr = SG_ENT_VIRT_ADDRESS(sg);
@@ -730,8 +724,7 @@ swiotlb_unmap_sg(struct device *hwdev, s
{
int i;
- if (dir == DMA_NONE)
- BUG();
+ BUG_ON(dir == DMA_NONE);
for (i = 0; i < nelems; i++, sg++)
if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
@@ -753,8 +746,7 @@ swiotlb_sync_sg(struct device *hwdev, st
{
int i;
- if (dir == DMA_NONE)
- BUG();
+ BUG_ON(dir == DMA_NONE);
for (i = 0; i < nelems; i++, sg++)
if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
diff --git a/mm/msync.c b/mm/msync.c
index 2672b8d..bc6c953 100644
--- a/mm/msync.c
+++ b/mm/msync.c
@@ -126,7 +126,7 @@ static unsigned long msync_page_range(st
* write out the dirty pages and wait on the writeout and check the result.
* Or the application may run fadvise(FADV_DONTNEED) against the fd to start
* async writeout immediately.
- * So my _not_ starting I/O in MS_ASYNC we provide complete flexibility to
+ * So by _not_ starting I/O in MS_ASYNC we provide complete flexibility to
* applications.
*/
static int msync_interval(struct vm_area_struct *vma, unsigned long addr,
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index bf96a61..9a3ec20 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -4,7 +4,7 @@
#
# Stage one of module building created the following:
# a) The individual .o files used for the module
-# b) A <module>.o file wich is the .o files above linked together
+# b) A <module>.o file which is the .o files above linked together
# c) A <module>.mod file in $(MODVERDIR)/, listing the name of the
# the preliminary <module>.o file, plus all .o files
diff --git a/sound/sparc/cs4231.c b/sound/sparc/cs4231.c
index 53a148b..8804f26 100644
--- a/sound/sparc/cs4231.c
+++ b/sound/sparc/cs4231.c
@@ -611,8 +611,7 @@ static void snd_cs4231_advance_dma(struc
unsigned int period_size = snd_pcm_lib_period_bytes(substream);
unsigned int offset = period_size * (*periods_sent);
- if (period_size >= (1 << 24))
- BUG();
+ BUG_ON(period_size >= (1 << 24));
if (dma_cont->request(dma_cont, runtime->dma_addr + offset, period_size))
return;
@@ -1079,8 +1078,7 @@ static int snd_cs4231_playback_prepare(s
chip->image[CS4231_IFACE_CTRL] &= ~(CS4231_PLAYBACK_ENABLE |
CS4231_PLAYBACK_PIO);
- if (runtime->period_size > 0xffff + 1)
- BUG();
+ BUG_ON(runtime->period_size > 0xffff + 1);
chip->p_periods_sent = 0;
spin_unlock_irqrestore(&chip->lock, flags);
^ permalink raw reply related [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-03-22 10:41 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-03-22 10:41 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following:
Adrian Bunk:
Documentation/dvb/get_dvb_firmware: fix firmware URL
Alexey Dobriyan:
It's UTF-8
Ian McDonald:
Documentation: Update to BUG-HUNTING
James Ring:
Fix spelling in E1000_DISABLE_PACKET_SPLIT Kconfig description
Lucas Correia Villa Real:
fix rwlock usage example
Michal Wronski:
Remove superfluous NOTIFY_COOKIE_LEN define
Rytchkov Alexey:
fixed path to moved file in include/linux/device.h
Uwe Zeisberger:
Fix "frist", "fisrt", typos
add "tags" to .gitignore
.gitignore | 1
Documentation/BUG-HUNTING | 113 +++++++++++++++++++++++++++
Documentation/dvb/get_dvb_firmware | 2
Documentation/filesystems/isofs.txt | 4
Documentation/filesystems/jfs.txt | 2
Documentation/filesystems/vfat.txt | 6 -
Documentation/spinlocks.txt | 2
drivers/base/platform.c | 2
drivers/block/cciss.c | 2
drivers/net/Kconfig | 2
drivers/s390/net/claw.c | 2
drivers/scsi/megaraid/megaraid_sas.c | 2
fs/befs/linuxvfs.c | 2
fs/cifs/CHANGES | 2
fs/fat/dir.c | 2
fs/fat/inode.c | 2
fs/isofs/joliet.c | 2
fs/nls/Kconfig | 2
include/asm-mips/termbits.h | 2
include/linux/device.h | 2
include/linux/msdos_fs.h | 2
ipc/mqueue.c | 1
22 files changed, 136 insertions(+), 23 deletions(-)
diff --git a/.gitignore b/.gitignore
index 53e53f2..27fd376 100644
--- a/.gitignore
+++ b/.gitignore
@@ -16,6 +16,7 @@
#
# Top-level generic files
#
+tags
vmlinux*
System.map
Module.symvers
diff --git a/Documentation/BUG-HUNTING b/Documentation/BUG-HUNTING
index ca29242..65b97e1 100644
--- a/Documentation/BUG-HUNTING
+++ b/Documentation/BUG-HUNTING
@@ -1,3 +1,56 @@
+Table of contents
+=================
+
+Last updated: 20 December 2005
+
+Contents
+========
+
+- Introduction
+- Devices not appearing
+- Finding patch that caused a bug
+-- Finding using git-bisect
+-- Finding it the old way
+- Fixing the bug
+
+Introduction
+============
+
+Always try the latest kernel from kernel.org and build from source. If you are
+not confident in doing that please report the bug to your distribution vendor
+instead of to a kernel developer.
+
+Finding bugs is not always easy. Have a go though. If you can't find it don't
+give up. Report as much as you have found to the relevant maintainer. See
+MAINTAINERS for who that is for the subsystem you have worked on.
+
+Before you submit a bug report read REPORTING-BUGS.
+
+Devices not appearing
+=====================
+
+Often this is caused by udev. Check that first before blaming it on the
+kernel.
+
+Finding patch that caused a bug
+===============================
+
+
+
+Finding using git-bisect
+------------------------
+
+Using the provided tools with git makes finding bugs easy provided the bug is
+reproducible.
+
+Steps to do it:
+- start using git for the kernel source
+- read the man page for git-bisect
+- have fun
+
+Finding it the old way
+----------------------
+
[Sat Mar 2 10:32:33 PST 1996 KERNEL_BUG-HOWTO lm@sgi.com (Larry McVoy)]
This is how to track down a bug if you know nothing about kernel hacking.
@@ -90,3 +143,63 @@ it does work and it lets non-hackers hel
because Linux snapshots will let you do this - something that you can't
do with vendor supplied releases.
+Fixing the bug
+==============
+
+Nobody is going to tell you how to fix bugs. Seriously. You need to work it
+out. But below are some hints on how to use the tools.
+
+To debug a kernel, use objdump and look for the hex offset from the crash
+output to find the valid line of code/assembler. Without debug symbols, you
+will see the assembler code for the routine shown, but if your kernel has
+debug symbols the C code will also be available. (Debug symbols can be enabled
+in the kernel hacking menu of the menu configuration.) For example:
+
+ objdump -r -S -l --disassemble net/dccp/ipv4.o
+
+NB.: you need to be at the top level of the kernel tree for this to pick up
+your C files.
+
+If you don't have access to the code you can also debug on some crash dumps
+e.g. crash dump output as shown by Dave Miller.
+
+> EIP is at ip_queue_xmit+0x14/0x4c0
+> ...
+> Code: 44 24 04 e8 6f 05 00 00 e9 e8 fe ff ff 8d 76 00 8d bc 27 00 00
+> 00 00 55 57 56 53 81 ec bc 00 00 00 8b ac 24 d0 00 00 00 8b 5d 08
+> <8b> 83 3c 01 00 00 89 44 24 14 8b 45 28 85 c0 89 44 24 18 0f 85
+>
+> Put the bytes into a "foo.s" file like this:
+>
+> .text
+> .globl foo
+> foo:
+> .byte .... /* bytes from Code: part of OOPS dump */
+>
+> Compile it with "gcc -c -o foo.o foo.s" then look at the output of
+> "objdump --disassemble foo.o".
+>
+> Output:
+>
+> ip_queue_xmit:
+> push %ebp
+> push %edi
+> push %esi
+> push %ebx
+> sub $0xbc, %esp
+> mov 0xd0(%esp), %ebp ! %ebp = arg0 (skb)
+> mov 0x8(%ebp), %ebx ! %ebx = skb->sk
+> mov 0x13c(%ebx), %eax ! %eax = inet_sk(sk)->opt
+
+Another very useful option of the Kernel Hacking section in menuconfig is
+Debug memory allocations. This will help you see whether data has been
+initialised and not set before use etc. To see the values that get assigned
+with this look at mm/slab.c and search for POISON_INUSE. When using this an
+Oops will often show the poisoned data instead of zero which is the default.
+
+Once you have worked out a fix please submit it upstream. After all open
+source is about sharing what you do and don't you want to be recognised for
+your genius?
+
+Please do read Documentation/SubmittingPatches though to help your code get
+accepted.
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index bb55f49..15fc8fb 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -246,7 +246,7 @@ sub vp7041 {
}
sub dibusb {
- my $url = "http://www.linuxtv.org/downloads/firmware/dvb-dibusb-5.0.0.11.fw";
+ my $url = "http://www.linuxtv.org/downloads/firmware/dvb-usb-dibusb-5.0.0.11.fw";
my $outfile = "dvb-dibusb-5.0.0.11.fw";
my $hash = "fa490295a527360ca16dcdf3224ca243";
diff --git a/Documentation/filesystems/isofs.txt b/Documentation/filesystems/isofs.txt
index 424585f..758e504 100644
--- a/Documentation/filesystems/isofs.txt
+++ b/Documentation/filesystems/isofs.txt
@@ -9,9 +9,9 @@ when using discs encoded using Microsoft
iocharset=name Character set to use for converting from Unicode to
ASCII. Joliet filenames are stored in Unicode format, but
Unix for the most part doesn't know how to deal with Unicode.
- There is also an option of doing UTF8 translations with the
+ There is also an option of doing UTF-8 translations with the
utf8 option.
- utf8 Encode Unicode names in UTF8 format. Default is no.
+ utf8 Encode Unicode names in UTF-8 format. Default is no.
Mount options unique to the isofs filesystem.
block=512 Set the block size for the disk to 512 bytes
diff --git a/Documentation/filesystems/jfs.txt b/Documentation/filesystems/jfs.txt
index 3e992da..bae1286 100644
--- a/Documentation/filesystems/jfs.txt
+++ b/Documentation/filesystems/jfs.txt
@@ -6,7 +6,7 @@ The following mount options are supporte
iocharset=name Character set to use for converting from Unicode to
ASCII. The default is to do no conversion. Use
- iocharset=utf8 for UTF8 translations. This requires
+ iocharset=utf8 for UTF-8 translations. This requires
CONFIG_NLS_UTF8 to be set in the kernel .config file.
iocharset=none specifies the default behavior explicitly.
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index 5ead20c..2001abb 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -28,16 +28,16 @@ iocharset=name -- Character set to use f
know how to deal with Unicode.
By default, FAT_DEFAULT_IOCHARSET setting is used.
- There is also an option of doing UTF8 translations
+ There is also an option of doing UTF-8 translations
with the utf8 option.
NOTE: "iocharset=utf8" is not recommended. If unsure,
you should consider the following option instead.
-utf8=<bool> -- UTF8 is the filesystem safe version of Unicode that
+utf8=<bool> -- UTF-8 is the filesystem safe version of Unicode that
is used by the console. It can be be enabled for the
filesystem with this option. If 'uni_xlate' gets set,
- UTF8 gets disabled.
+ UTF-8 gets disabled.
uni_xlate=<bool> -- Translate unhandled Unicode characters to special
escaped sequences. This would let you backup and
diff --git a/Documentation/spinlocks.txt b/Documentation/spinlocks.txt
index c212299..a661d68 100644
--- a/Documentation/spinlocks.txt
+++ b/Documentation/spinlocks.txt
@@ -9,7 +9,7 @@ removed soon. So for any new code dynami
static int __init xxx_init(void)
{
spin_lock_init(&xxx_lock);
- rw_lock_init(&xxx_rw_lock);
+ rwlock_init(&xxx_rw_lock);
...
}
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 89b2683..83f5c59 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -326,7 +326,7 @@ EXPORT_SYMBOL_GPL(platform_device_regist
* platform_device_unregister - unregister a platform-level device
* @pdev: platform device we're unregistering
*
- * Unregistration is done in 2 steps. Fisrt we release all resources
+ * Unregistration is done in 2 steps. First we release all resources
* and remove it from the subsystem, then we drop reference count by
* calling platform_device_put().
*/
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 0d65394..62b6f9d 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -2137,7 +2137,7 @@ static void start_io( ctlr_info_t *h)
break;
}
- /* Get the frist entry from the Request Q */
+ /* Get the first entry from the Request Q */
removeQ(&(h->reqQ), c);
h->Qdepth--;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e0b1109..00993e8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1914,7 +1914,7 @@ config E1000_DISABLE_PACKET_SPLIT
depends on E1000
help
Say Y here if you want to use the legacy receive path for PCI express
- hadware.
+ hardware.
If in doubt, say N.
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index a86436a..acd2a3f 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -1404,7 +1404,7 @@ add_claw_reads(struct net_device *dev, s
if ( privptr-> p_read_active_first ==NULL ) {
#ifdef DEBUGMSG
- printk(KERN_INFO "%s:%s p_read_active_frist == NULL \n",
+ printk(KERN_INFO "%s:%s p_read_active_first == NULL \n",
dev->name,__FUNCTION__);
printk(KERN_INFO "%s:%s Read active first/last changed \n",
dev->name,__FUNCTION__);
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 4f39dd0..84c379f 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -915,7 +915,7 @@ static int megasas_reset_bus_host(struct
int ret;
/*
- * Frist wait for all commands to complete
+ * First wait for all commands to complete
*/
ret = megasas_generic_reset(scmd);
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 2d365cb..dd6048c 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -561,7 +561,7 @@ befs_utf2nls(struct super_block *sb, con
* @sb: Superblock
* @src: Input string buffer in NLS format
* @srclen: Length of input string in bytes
- * @dest: The output string in UTF8 format
+ * @dest: The output string in UTF-8 format
* @destlen: Length of the output buffer
*
* Converts input string @src, which is in the format of the loaded NLS map,
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index d335015..cb68efb 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -160,7 +160,7 @@ improperly zeroed buffer in CIFS Unix ex
Version 1.25
------------
Fix internationalization problem in cifs readdir with filenames that map to
-longer UTF8 strings than the string on the wire was in Unicode. Add workaround
+longer UTF-8 strings than the string on the wire was in Unicode. Add workaround
for readdir to netapp servers. Fix search rewind (seek into readdir to return
non-consecutive entries). Do not do readdir when server negotiates
buffer size to small to fit filename. Add support for reading POSIX ACLs from
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index db0de5c..4095bc1 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -114,7 +114,7 @@ static inline int fat_get_entry(struct i
}
/*
- * Convert Unicode 16 to UTF8, translated Unicode, or ASCII.
+ * Convert Unicode 16 to UTF-8, translated Unicode, or ASCII.
* If uni_xlate is enabled and we can't get a 1:1 conversion, use a
* colon as an escape character since it is normally invalid on the vfat
* filesystem. The following four characters are the hexadecimal digits
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index e7f4aa7..e78d7b4 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -1101,7 +1101,7 @@ static int parse_options(char *options,
return -EINVAL;
}
}
- /* UTF8 doesn't provide FAT semantics */
+ /* UTF-8 doesn't provide FAT semantics */
if (!strcmp(opts->iocharset, "utf8")) {
printk(KERN_ERR "FAT: utf8 is not a recommended IO charset"
" for FAT filesystems, filesystem will be case sensitive!\n");
diff --git a/fs/isofs/joliet.c b/fs/isofs/joliet.c
index 2931de7..81a90e1 100644
--- a/fs/isofs/joliet.c
+++ b/fs/isofs/joliet.c
@@ -11,7 +11,7 @@
#include "isofs.h"
/*
- * Convert Unicode 16 to UTF8 or ASCII.
+ * Convert Unicode 16 to UTF-8 or ASCII.
*/
static int
uni16_to_x8(unsigned char *ascii, u16 *uni, int len, struct nls_table *nls)
diff --git a/fs/nls/Kconfig b/fs/nls/Kconfig
index 0ab8f00..976eccc 100644
--- a/fs/nls/Kconfig
+++ b/fs/nls/Kconfig
@@ -491,7 +491,7 @@ config NLS_KOI8_U
(koi8-u) and Belarusian (koi8-ru) character sets.
config NLS_UTF8
- tristate "NLS UTF8"
+ tristate "NLS UTF-8"
depends on NLS
help
If you want to display filenames with native language characters
diff --git a/include/asm-mips/termbits.h b/include/asm-mips/termbits.h
index c29c65b..fa6d04d 100644
--- a/include/asm-mips/termbits.h
+++ b/include/asm-mips/termbits.h
@@ -77,7 +77,7 @@ struct termios {
#define IXANY 0004000 /* Any character will restart after stop. */
#define IXOFF 0010000 /* Enable start/stop input control. */
#define IMAXBEL 0020000 /* Ring bell when input queue is full. */
-#define IUTF8 0040000 /* Input is UTF8 */
+#define IUTF8 0040000 /* Input is UTF-8 */
/* c_oflag bits */
#define OPOST 0000001 /* Perform output processing. */
diff --git a/include/linux/device.h b/include/linux/device.h
index 5b595fd..10c1693 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -399,7 +399,7 @@ extern struct device * get_device(struct
extern void put_device(struct device * dev);
-/* drivers/base/power.c */
+/* drivers/base/power/shutdown.c */
extern void device_shutdown(void);
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index e933e2a..8bcd945 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -199,7 +199,7 @@ struct fat_mount_options {
sys_immutable:1, /* set = system files are immutable */
dotsOK:1, /* set = hidden and system files are named '.filename' */
isvfat:1, /* 0=no vfat long filename support, 1=vfat support */
- utf8:1, /* Use of UTF8 character set (Default) */
+ utf8:1, /* Use of UTF-8 character set (Default) */
unicode_xlate:1, /* create escape sequences for unhandled Unicode */
numtail:1, /* Does first alias have a numeric '~1' type tail? */
atari:1, /* Use Atari GEMDOS variation of MS-DOS fs */
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index fd2e26b..85c52fd 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -51,7 +51,6 @@
#define HARD_MSGMAX (131072/sizeof(void*))
#define DFLT_MSGSIZEMAX 8192 /* max message size */
-#define NOTIFY_COOKIE_LEN 32
struct ext_wait_queue { /* queue of sleeping tasks */
struct task_struct *task;
^ permalink raw reply related [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-01-11 1:31 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-01-11 1:31 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Andrew Morton, linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following changes:
Adrian Bunk:
MAINTAINERS: sh: update the mailing list
drivers/net/gianfar_sysfs.c: update email address of Kumar Gala
Jesper Juhl:
Tiny esthetic changes to Documentation/laptop-mode.txt
add missing printk loglevel in mm/swapfile.c
missing printk loglevel and tiny tiny whitespace change in binfmt_elf()
add loglevel to printk in fs/afs/cmservice.c
Luiz Fernando Capitulino:
ext2: trivial indentation fix.
Nicolas Kaiser:
netfilter: headers included twice
xfs: header included twice
asm-powerpc: header included twice
fs/attr.c: header included twice
fs/proc/vmcore.c: header included twice
Paul Jackson:
cpuset two little doc fixes
Documentation/cpusets.txt | 4 ++--
Documentation/laptop-mode.txt | 6 +++---
MAINTAINERS | 2 +-
drivers/net/gianfar_sysfs.c | 2 +-
fs/afs/cmservice.c | 2 +-
fs/attr.c | 1 -
fs/binfmt_elf.c | 8 ++++----
fs/ext2/dir.c | 2 +-
fs/proc/vmcore.c | 1 -
fs/xfs/xfs_iomap.c | 1 -
include/asm-powerpc/elf.h | 1 -
mm/swapfile.c | 2 +-
net/decnet/netfilter/dn_rtmsg.c | 2 --
net/ipv4/netfilter/ip_conntrack_proto_icmp.c | 1 -
net/ipv4/netfilter/ip_conntrack_proto_tcp.c | 1 -
net/ipv4/netfilter/ip_conntrack_proto_udp.c | 1 -
16 files changed, 14 insertions(+), 23 deletions(-)
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index 9e49b1c..990998e 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -135,7 +135,7 @@ Cpusets extends these two mechanisms as
The implementation of cpusets requires a few, simple hooks
into the rest of the kernel, none in performance critical paths:
- - in main/init.c, to initialize the root cpuset at system boot.
+ - in init/main.c, to initialize the root cpuset at system boot.
- in fork and exit, to attach and detach a task from its cpuset.
- in sched_setaffinity, to mask the requested CPUs by what's
allowed in that tasks cpuset.
@@ -146,7 +146,7 @@ into the rest of the kernel, none in per
and related changes in both sched.c and arch/ia64/kernel/domain.c
- in the mbind and set_mempolicy system calls, to mask the requested
Memory Nodes by what's allowed in that tasks cpuset.
- - in page_alloc, to restrict memory to allowed nodes.
+ - in page_alloc.c, to restrict memory to allowed nodes.
- in vmscan.c, to restrict page recovery to the current cpuset.
In addition a new file system, of type "cpuset" may be mounted,
diff --git a/Documentation/laptop-mode.txt b/Documentation/laptop-mode.txt
index dc4e810..f42e4c0 100644
--- a/Documentation/laptop-mode.txt
+++ b/Documentation/laptop-mode.txt
@@ -3,7 +3,7 @@ How to conserve battery power using lapt
Document Author: Bart Samwel (bart@samwel.tk)
Date created: January 2, 2004
-Last modified: July 10, 2004
+Last modified: December 06, 2004
Introduction
------------
@@ -33,7 +33,7 @@ or anything. Simply install all the file
laptop mode will automatically be started when you're on battery. For
your convenience, a tarball containing an installer can be downloaded at:
-http://www.xs4all.nl/~bsamwel/laptop_mode/tools
+http://www.xs4all.nl/~bsamwel/laptop_mode/tools/
To configure laptop mode, you need to edit the configuration file, which is
located in /etc/default/laptop-mode on Debian-based systems, or in
@@ -912,7 +912,7 @@ void usage()
exit(0);
}
-int main(int ac, char **av)
+int main(int argc, char **argv)
{
int fd;
char *disk = 0;
diff --git a/MAINTAINERS b/MAINTAINERS
index 090e10b..b6416a2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2487,7 +2487,7 @@ P: Paul Mundt
M: lethal@linux-sh.org
P: Kazumoto Kojima
M: kkojima@rr.iij4u.or.jp
-L: linux-sh@m17n.org
+L: linuxsh-dev@lists.sourceforge.net
W: http://www.linux-sh.org
W: http://www.m17n.org/linux-sh/
W: http://www.rr.iij4u.or.jp/~kkojima/linux-sh4.html
diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c
index 10d34cb..51ef181 100644
--- a/drivers/net/gianfar_sysfs.c
+++ b/drivers/net/gianfar_sysfs.c
@@ -7,7 +7,7 @@
* Based on 8260_io/fcc_enet.c
*
* Author: Andy Fleming
- * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ * Maintainer: Kumar Gala (galak@kernel.crashing.org)
*
* Copyright (c) 2002-2005 Freescale Semiconductor, Inc.
*
diff --git a/fs/afs/cmservice.c b/fs/afs/cmservice.c
index 0a57fd7..9eef6bf 100644
--- a/fs/afs/cmservice.c
+++ b/fs/afs/cmservice.c
@@ -118,7 +118,7 @@ static int kafscmd(void *arg)
_SRXAFSCM_xxxx_t func;
int die;
- printk("kAFS: Started kafscmd %d\n", current->pid);
+ printk(KERN_INFO "kAFS: Started kafscmd %d\n", current->pid);
daemonize("kafscmd");
diff --git a/fs/attr.c b/fs/attr.c
index b347325..d63e509 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -14,7 +14,6 @@
#include <linux/fcntl.h>
#include <linux/quotaops.h>
#include <linux/security.h>
-#include <linux/time.h>
/* Taken over from the old code... */
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index a4f6f57..f979ebb 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1634,17 +1634,17 @@ static int elf_core_dump(long signr, str
ELF_CORE_WRITE_EXTRA_DATA;
#endif
- if ((off_t) file->f_pos != offset) {
+ if ((off_t)file->f_pos != offset) {
/* Sanity check */
- printk("elf_core_dump: file->f_pos (%ld) != offset (%ld)\n",
- (off_t) file->f_pos, offset);
+ printk(KERN_WARNING "elf_core_dump: file->f_pos (%ld) != offset (%ld)\n",
+ (off_t)file->f_pos, offset);
}
end_coredump:
set_fs(fs);
cleanup:
- while(!list_empty(&thread_list)) {
+ while (!list_empty(&thread_list)) {
struct list_head *tmp = thread_list.next;
list_del(tmp);
kfree(list_entry(tmp, struct elf_thread_status, list));
diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index 5b5f528..7442bdd 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -592,7 +592,7 @@ int ext2_make_empty(struct inode *inode,
goto fail;
}
kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr, 0, chunk_size);
+ memset(kaddr, 0, chunk_size);
de = (struct ext2_dir_entry_2 *)kaddr;
de->name_len = 1;
de->rec_len = cpu_to_le16(EXT2_DIR_REC_LEN(1));
diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index 5378d7c..124e354 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -14,7 +14,6 @@
#include <linux/a.out.h>
#include <linux/elf.h>
#include <linux/elfcore.h>
-#include <linux/proc_fs.h>
#include <linux/highmem.h>
#include <linux/bootmem.h>
#include <linux/init.h>
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 45a77a3..ca7afc8 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -40,7 +40,6 @@
#include "xfs_ialloc.h"
#include "xfs_btree.h"
#include "xfs_bmap.h"
-#include "xfs_bit.h"
#include "xfs_rtalloc.h"
#include "xfs_error.h"
#include "xfs_itable.h"
diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h
index c5a635d..45f2af6 100644
--- a/include/asm-powerpc/elf.h
+++ b/include/asm-powerpc/elf.h
@@ -92,7 +92,6 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-#include <asm/ptrace.h>
#define ELF_NGREG 48 /* includes nip, msr, lr, etc. */
#define ELF_NFPREG 33 /* includes fpscr */
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 6544565..d8a5afc 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1442,7 +1442,7 @@ asmlinkage long sys_swapon(const char __
else if (!memcmp("SWAPSPACE2",swap_header->magic.magic,10))
swap_header_version = 2;
else {
- printk("Unable to find swap-space signature\n");
+ printk(KERN_ERR "Unable to find swap-space signature\n");
error = -EINVAL;
goto bad_swap;
}
diff --git a/net/decnet/netfilter/dn_rtmsg.c b/net/decnet/netfilter/dn_rtmsg.c
index 1ab94c6..16a5a31 100644
--- a/net/decnet/netfilter/dn_rtmsg.c
+++ b/net/decnet/netfilter/dn_rtmsg.c
@@ -26,8 +26,6 @@
#include <net/dn.h>
#include <net/dn_route.h>
-#include <linux/netfilter_decnet.h>
-
static struct sock *dnrmg = NULL;
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_icmp.c b/net/ipv4/netfilter/ip_conntrack_proto_icmp.c
index f2a90e2..3021af0 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_icmp.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_icmp.c
@@ -16,7 +16,6 @@
#include <linux/skbuff.h>
#include <net/ip.h>
#include <net/checksum.h>
-#include <linux/netfilter.h>
#include <linux/netfilter_ipv4.h>
#include <linux/netfilter_ipv4/ip_conntrack.h>
#include <linux/netfilter_ipv4/ip_conntrack_core.h>
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
index ea2b39c..e0dc370 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
@@ -32,7 +32,6 @@
#include <net/tcp.h>
-#include <linux/netfilter.h>
#include <linux/netfilter_ipv4.h>
#include <linux/netfilter_ipv4/ip_conntrack.h>
#include <linux/netfilter_ipv4/ip_conntrack_protocol.h>
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_udp.c b/net/ipv4/netfilter/ip_conntrack_proto_udp.c
index 004003f..55b7d32 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_udp.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_udp.c
@@ -15,7 +15,6 @@
#include <linux/udp.h>
#include <linux/seq_file.h>
#include <net/checksum.h>
-#include <linux/netfilter.h>
#include <linux/netfilter_ipv4.h>
#include <linux/netfilter_ipv4/ip_conntrack_protocol.h>
^ permalink raw reply related [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-01-10 0:54 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-01-10 0:54 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Andrew Morton, linux-kernel
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following changes:
Adrian Bunk:
spelling: s/usefull/useful/
s/assoicated/associated/
spelling: s/retreive/retrieve/
spelling: s/trough/through/
MAINTAINERS: remove BUSLOGIC entry
remove the outdated arch/i386/kernel/cpu/{,mtrr/}changelog
Documentation/filesystems/proc.txt: indentation fix
Jesper Juhl:
Small fixups to the EHCI Kconfig help text
Documentation/filesystems/proc.txt | 2
Documentation/i2o/ioctl | 2
Documentation/networking/sk98lin.txt | 2
Documentation/power/swsusp.txt | 4
MAINTAINERS | 7
Makefile | 2
arch/arm/mach-omap1/board-perseus2.c | 2
arch/i386/kernel/cpu/changelog | 63 -----
arch/i386/kernel/cpu/mtrr/changelog | 229 -------------------
arch/powerpc/kernel/prom.c | 2
arch/powerpc/kernel/rtas.c | 2
arch/powerpc/kernel/setup_64.c | 2
arch/powerpc/mm/hash_utils_64.c | 2
arch/powerpc/platforms/powermac/cpufreq_64.c | 2
arch/xtensa/kernel/time.c | 2
drivers/cdrom/cm206.c | 2
drivers/macintosh/therm_pm72.c | 4
drivers/macintosh/windfarm_pm81.c | 2
drivers/media/radio/radio-sf16fmr2.c | 2
drivers/message/i2o/README.ioctl | 2
drivers/net/hp100.c | 2
drivers/net/pcmcia/xirc2ps_cs.c | 2
drivers/net/sk98lin/skdim.c | 2
drivers/net/sk98lin/skge.c | 2
drivers/net/sk98lin/skgepnmi.c | 8
drivers/parisc/led.c | 2
drivers/usb/host/Kconfig | 10
drivers/usb/serial/cypress_m8.c | 2
drivers/usb/serial/usb-serial.c | 2
drivers/video/aty/radeon_monitor.c | 2
drivers/video/logo/Makefile | 2
drivers/w1/Kconfig | 2
fs/9p/vfs_inode.c | 2
include/asm-powerpc/smu.h | 6
include/linux/elevator.h | 2
net/ipv4/netfilter/ip_conntrack_proto_tcp.c | 4
net/netfilter/nf_conntrack_proto_tcp.c | 4
scripts/Makefile.modpost | 2
scripts/mksysmap | 2
sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c | 2
40 files changed, 50 insertions(+), 349 deletions(-)
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index a4dcf42..944cf10 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -418,7 +418,7 @@ VmallocChunk: 111088 kB
Dirty: Memory which is waiting to get written back to the disk
Writeback: Memory which is actively being written back to the disk
Mapped: files which have been mmaped, such as libraries
- Slab: in-kernel data structures cache
+ Slab: in-kernel data structures cache
CommitLimit: Based on the overcommit ratio ('vm.overcommit_ratio'),
this is the total amount of memory currently available to
be allocated on the system. This limit is only adhered to
diff --git a/Documentation/i2o/ioctl b/Documentation/i2o/ioctl
index 3e17497..1e77fac 100644
--- a/Documentation/i2o/ioctl
+++ b/Documentation/i2o/ioctl
@@ -185,7 +185,7 @@ VII. Getting Parameters
ENOMEM Kernel memory allocation error
A return value of 0 does not mean that the value was actually
- properly retreived. The user should check the result list
+ properly retrieved. The user should check the result list
to determine the specific status of the transaction.
VIII. Downloading Software
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
index 851fc97..f9d979e 100644
--- a/Documentation/networking/sk98lin.txt
+++ b/Documentation/networking/sk98lin.txt
@@ -245,7 +245,7 @@ Default: Both
This parameters is only relevant if auto-negotiation for this port is
not set to "Sense". If auto-negotiation is set to "On", all three values
are possible. If it is set to "Off", only "Full" and "Half" are allowed.
-This parameter is usefull if your link partner does not support all
+This parameter is useful if your link partner does not support all
possible combinations.
Flow Control
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index cd0fcd8..08c79d4 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -212,7 +212,7 @@ A: Try running
cat `cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u` > /dev/null
-after resume. swapoff -a; swapon -a may also be usefull.
+after resume. swapoff -a; swapon -a may also be useful.
Q: What happens to devices during swsusp? They seem to be resumed
during system suspend?
@@ -323,7 +323,7 @@ to be useless to try to suspend to disk
A: No, it should work okay, as long as your app does not mlock()
it. Just prepare big enough swap partition.
-Q: What information is usefull for debugging suspend-to-disk problems?
+Q: What information is useful for debugging suspend-to-disk problems?
A: Well, last messages on the screen are always useful. If something
is broken, it is usually some kernel driver, therefore trying with as
diff --git a/MAINTAINERS b/MAINTAINERS
index 270e28c..9b788d7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -546,13 +546,6 @@ W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
-BUSLOGIC SCSI DRIVER
-P: Leonard N. Zubkoff
-M: Leonard N. Zubkoff <lnz@dandelion.com>
-L: linux-scsi@vger.kernel.org
-W: http://www.dandelion.com/Linux/
-S: Maintained
-
COMMON INTERNET FILE SYSTEM (CIFS)
P: Steve French
M: sfrench@samba.org
diff --git a/Makefile b/Makefile
index 599e744..fb497ea 100644
--- a/Makefile
+++ b/Makefile
@@ -251,7 +251,7 @@ export KBUILD_CHECKSRC KBUILD_SRC KBUILD
# If it is set to "silent_", nothing wil be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
-# A simple variant is to prefix commands with $(Q) - that's usefull
+# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index bd900b7..92ff5dc 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -184,7 +184,7 @@ static void __init omap_perseus2_map_io(
omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
/*
- * Ethernet support trough the debug board
+ * Ethernet support through the debug board
* CS1 timings setup
*/
omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
diff --git a/arch/i386/kernel/cpu/changelog b/arch/i386/kernel/cpu/changelog
deleted file mode 100644
index cef76b8..0000000
--- a/arch/i386/kernel/cpu/changelog
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Enhanced CPU type detection by Mike Jagdis, Patrick St. Jean
- * and Martin Mares, November 1997.
- *
- * Force Cyrix 6x86(MX) and M II processors to report MTRR capability
- * and Cyrix "coma bug" recognition by
- * Zoltán Böszörményi <zboszor@mail.externet.hu> February 1999.
- *
- * Force Centaur C6 processors to report MTRR capability.
- * Bart Hartgers <bart@etpmod.phys.tue.nl>, May 1999.
- *
- * Intel Mobile Pentium II detection fix. Sean Gilley, June 1999.
- *
- * IDT Winchip tweaks, misc clean ups.
- * Dave Jones <davej@suse.de>, August 1999
- *
- * Better detection of Centaur/IDT WinChip models.
- * Bart Hartgers <bart@etpmod.phys.tue.nl>, August 1999.
- *
- * Cleaned up cache-detection code
- * Dave Jones <davej@suse.de>, October 1999
- *
- * Added proper L2 cache detection for Coppermine
- * Dragan Stancevic <visitor@valinux.com>, October 1999
- *
- * Added the original array for capability flags but forgot to credit
- * myself :) (~1998) Fixed/cleaned up some cpu_model_info and other stuff
- * Jauder Ho <jauderho@carumba.com>, January 2000
- *
- * Detection for Celeron coppermine, identify_cpu() overhauled,
- * and a few other clean ups.
- * Dave Jones <davej@suse.de>, April 2000
- *
- * Pentium III FXSR, SSE support
- * General FPU state handling cleanups
- * Gareth Hughes <gareth@valinux.com>, May 2000
- *
- * Added proper Cascades CPU and L2 cache detection for Cascades
- * and 8-way type cache happy bunch from Intel:^)
- * Dragan Stancevic <visitor@valinux.com>, May 2000
- *
- * Forward port AMD Duron errata T13 from 2.2.17pre
- * Dave Jones <davej@suse.de>, August 2000
- *
- * Forward port lots of fixes/improvements from 2.2.18pre
- * Cyrix III, Pentium IV support.
- * Dave Jones <davej@suse.de>, October 2000
- *
- * Massive cleanup of CPU detection and bug handling;
- * Transmeta CPU detection,
- * H. Peter Anvin <hpa@zytor.com>, November 2000
- *
- * VIA C3 Support.
- * Dave Jones <davej@suse.de>, March 2001
- *
- * AMD Athlon/Duron/Thunderbird bluesmoke support.
- * Dave Jones <davej@suse.de>, April 2001.
- *
- * CacheSize bug workaround updates for AMD, Intel & VIA Cyrix.
- * Dave Jones <davej@suse.de>, September, October 2001.
- *
- */
-
diff --git a/arch/i386/kernel/cpu/mtrr/changelog b/arch/i386/kernel/cpu/mtrr/changelog
deleted file mode 100644
index af13685..0000000
--- a/arch/i386/kernel/cpu/mtrr/changelog
+++ /dev/null
@@ -1,229 +0,0 @@
- ChangeLog
-
- Prehistory Martin Tischhäuser <martin@ikcbarka.fzk.de>
- Initial register-setting code (from proform-1.0).
- 19971216 Richard Gooch <rgooch@atnf.csiro.au>
- Original version for /proc/mtrr interface, SMP-safe.
- v1.0
- 19971217 Richard Gooch <rgooch@atnf.csiro.au>
- Bug fix for ioctls()'s.
- Added sample code in Documentation/mtrr.txt
- v1.1
- 19971218 Richard Gooch <rgooch@atnf.csiro.au>
- Disallow overlapping regions.
- 19971219 Jens Maurer <jmaurer@menuett.rhein-main.de>
- Register-setting fixups.
- v1.2
- 19971222 Richard Gooch <rgooch@atnf.csiro.au>
- Fixups for kernel 2.1.75.
- v1.3
- 19971229 David Wragg <dpw@doc.ic.ac.uk>
- Register-setting fixups and conformity with Intel conventions.
- 19971229 Richard Gooch <rgooch@atnf.csiro.au>
- Cosmetic changes and wrote this ChangeLog ;-)
- 19980106 Richard Gooch <rgooch@atnf.csiro.au>
- Fixups for kernel 2.1.78.
- v1.4
- 19980119 David Wragg <dpw@doc.ic.ac.uk>
- Included passive-release enable code (elsewhere in PCI setup).
- v1.5
- 19980131 Richard Gooch <rgooch@atnf.csiro.au>
- Replaced global kernel lock with private spinlock.
- v1.6
- 19980201 Richard Gooch <rgooch@atnf.csiro.au>
- Added wait for other CPUs to complete changes.
- v1.7
- 19980202 Richard Gooch <rgooch@atnf.csiro.au>
- Bug fix in definition of <set_mtrr> for UP.
- v1.8
- 19980319 Richard Gooch <rgooch@atnf.csiro.au>
- Fixups for kernel 2.1.90.
- 19980323 Richard Gooch <rgooch@atnf.csiro.au>
- Move SMP BIOS fixup before secondary CPUs call <calibrate_delay>
- v1.9
- 19980325 Richard Gooch <rgooch@atnf.csiro.au>
- Fixed test for overlapping regions: confused by adjacent regions
- 19980326 Richard Gooch <rgooch@atnf.csiro.au>
- Added wbinvd in <set_mtrr_prepare>.
- 19980401 Richard Gooch <rgooch@atnf.csiro.au>
- Bug fix for non-SMP compilation.
- 19980418 David Wragg <dpw@doc.ic.ac.uk>
- Fixed-MTRR synchronisation for SMP and use atomic operations
- instead of spinlocks.
- 19980418 Richard Gooch <rgooch@atnf.csiro.au>
- Differentiate different MTRR register classes for BIOS fixup.
- v1.10
- 19980419 David Wragg <dpw@doc.ic.ac.uk>
- Bug fix in variable MTRR synchronisation.
- v1.11
- 19980419 Richard Gooch <rgooch@atnf.csiro.au>
- Fixups for kernel 2.1.97.
- v1.12
- 19980421 Richard Gooch <rgooch@atnf.csiro.au>
- Safer synchronisation across CPUs when changing MTRRs.
- v1.13
- 19980423 Richard Gooch <rgooch@atnf.csiro.au>
- Bugfix for SMP systems without MTRR support.
- v1.14
- 19980427 Richard Gooch <rgooch@atnf.csiro.au>
- Trap calls to <mtrr_add> and <mtrr_del> on non-MTRR machines.
- v1.15
- 19980427 Richard Gooch <rgooch@atnf.csiro.au>
- Use atomic bitops for setting SMP change mask.
- v1.16
- 19980428 Richard Gooch <rgooch@atnf.csiro.au>
- Removed spurious diagnostic message.
- v1.17
- 19980429 Richard Gooch <rgooch@atnf.csiro.au>
- Moved register-setting macros into this file.
- Moved setup code from init/main.c to i386-specific areas.
- v1.18
- 19980502 Richard Gooch <rgooch@atnf.csiro.au>
- Moved MTRR detection outside conditionals in <mtrr_init>.
- v1.19
- 19980502 Richard Gooch <rgooch@atnf.csiro.au>
- Documentation improvement: mention Pentium II and AGP.
- v1.20
- 19980521 Richard Gooch <rgooch@atnf.csiro.au>
- Only manipulate interrupt enable flag on local CPU.
- Allow enclosed uncachable regions.
- v1.21
- 19980611 Richard Gooch <rgooch@atnf.csiro.au>
- Always define <main_lock>.
- v1.22
- 19980901 Richard Gooch <rgooch@atnf.csiro.au>
- Removed module support in order to tidy up code.
- Added sanity check for <mtrr_add>/<mtrr_del> before <mtrr_init>.
- Created addition queue for prior to SMP commence.
- v1.23
- 19980902 Richard Gooch <rgooch@atnf.csiro.au>
- Ported patch to kernel 2.1.120-pre3.
- v1.24
- 19980910 Richard Gooch <rgooch@atnf.csiro.au>
- Removed sanity checks and addition queue: Linus prefers an OOPS.
- v1.25
- 19981001 Richard Gooch <rgooch@atnf.csiro.au>
- Fixed harmless compiler warning in include/asm-i386/mtrr.h
- Fixed version numbering and history for v1.23 -> v1.24.
- v1.26
- 19990118 Richard Gooch <rgooch@atnf.csiro.au>
- Added devfs support.
- v1.27
- 19990123 Richard Gooch <rgooch@atnf.csiro.au>
- Changed locking to spin with reschedule.
- Made use of new <smp_call_function>.
- v1.28
- 19990201 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Extended the driver to be able to use Cyrix style ARRs.
- 19990204 Richard Gooch <rgooch@atnf.csiro.au>
- Restructured Cyrix support.
- v1.29
- 19990204 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Refined ARR support: enable MAPEN in set_mtrr_prepare()
- and disable MAPEN in set_mtrr_done().
- 19990205 Richard Gooch <rgooch@atnf.csiro.au>
- Minor cleanups.
- v1.30
- 19990208 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Protect plain 6x86s (and other processors without the
- Page Global Enable feature) against accessing CR4 in
- set_mtrr_prepare() and set_mtrr_done().
- 19990210 Richard Gooch <rgooch@atnf.csiro.au>
- Turned <set_mtrr_up> and <get_mtrr> into function pointers.
- v1.31
- 19990212 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Major rewrite of cyrix_arr_init(): do not touch ARRs,
- leave them as the BIOS have set them up.
- Enable usage of all 8 ARRs.
- Avoid multiplications by 3 everywhere and other
- code clean ups/speed ups.
- 19990213 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Set up other Cyrix processors identical to the boot cpu.
- Since Cyrix don't support Intel APIC, this is l'art pour l'art.
- Weigh ARRs by size:
- If size <= 32M is given, set up ARR# we were given.
- If size > 32M is given, set up ARR7 only if it is free,
- fail otherwise.
- 19990214 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Also check for size >= 256K if we are to set up ARR7,
- mtrr_add() returns the value it gets from set_mtrr()
- 19990218 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Remove Cyrix "coma bug" workaround from here.
- Moved to linux/arch/i386/kernel/setup.c and
- linux/include/asm-i386/bugs.h
- 19990228 Richard Gooch <rgooch@atnf.csiro.au>
- Added MTRRIOC_KILL_ENTRY ioctl(2)
- Trap for counter underflow in <mtrr_file_del>.
- Trap for 4 MiB aligned regions for PPro, stepping <= 7.
- 19990301 Richard Gooch <rgooch@atnf.csiro.au>
- Created <get_free_region> hook.
- 19990305 Richard Gooch <rgooch@atnf.csiro.au>
- Temporarily disable AMD support now MTRR capability flag is set.
- v1.32
- 19990308 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Adjust my changes (19990212-19990218) to Richard Gooch's
- latest changes. (19990228-19990305)
- v1.33
- 19990309 Richard Gooch <rgooch@atnf.csiro.au>
- Fixed typo in <printk> message.
- 19990310 Richard Gooch <rgooch@atnf.csiro.au>
- Support K6-II/III based on Alan Cox's <alan@redhat.com> patches.
- v1.34
- 19990511 Bart Hartgers <bart@etpmod.phys.tue.nl>
- Support Centaur C6 MCR's.
- 19990512 Richard Gooch <rgooch@atnf.csiro.au>
- Minor cleanups.
- v1.35
- 19990707 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Check whether ARR3 is protected in cyrix_get_free_region()
- and mtrr_del(). The code won't attempt to delete or change it
- from now on if the BIOS protected ARR3. It silently skips ARR3
- in cyrix_get_free_region() or returns with an error code from
- mtrr_del().
- 19990711 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Reset some bits in the CCRs in cyrix_arr_init() to disable SMM
- if ARR3 isn't protected. This is needed because if SMM is active
- and ARR3 isn't protected then deleting and setting ARR3 again
- may lock up the processor. With SMM entirely disabled, it does
- not happen.
- 19990812 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Rearrange switch() statements so the driver accomodates to
- the fact that the AMD Athlon handles its MTRRs the same way
- as Intel does.
- 19990814 Zoltán Böszörményi <zboszor@mail.externet.hu>
- Double check for Intel in mtrr_add()'s big switch() because
- that revision check is only valid for Intel CPUs.
- 19990819 Alan Cox <alan@redhat.com>
- Tested Zoltan's changes on a pre production Athlon - 100%
- success.
- 19991008 Manfred Spraul <manfreds@colorfullife.com>
- replaced spin_lock_reschedule() with a normal semaphore.
- v1.36
- 20000221 Richard Gooch <rgooch@atnf.csiro.au>
- Compile fix if procfs and devfs not enabled.
- Formatting changes.
- v1.37
- 20001109 H. Peter Anvin <hpa@zytor.com>
- Use the new centralized CPU feature detects.
-
- v1.38
- 20010309 Dave Jones <davej@suse.de>
- Add support for Cyrix III.
-
- v1.39
- 20010312 Dave Jones <davej@suse.de>
- Ugh, I broke AMD support.
- Reworked fix by Troels Walsted Hansen <troels@thule.no>
-
- v1.40
- 20010327 Dave Jones <davej@suse.de>
- Adapted Cyrix III support to include VIA C3.
-
- v2.0
- 20020306 Patrick Mochel <mochel@osdl.org>
- Split mtrr.c -> mtrr/*.c
- Converted to Linux Kernel Coding Style
- Fixed several minor nits in form
- Moved some SMP-only functions out, so they can be used
- for power management in the future.
- TODO: Fix user interface cruft.
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 977ee3a..34ab0da 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -972,7 +972,7 @@ static int __init early_init_dt_scan_cho
#endif
#ifdef CONFIG_PPC_RTAS
- /* To help early debugging via the front panel, we retreive a minimal
+ /* To help early debugging via the front panel, we retrieve a minimal
* set of RTAS infos now if available
*/
{
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 4283fa3..ae2e2a3 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -632,7 +632,7 @@ void rtas_stop_self(void)
}
/*
- * Call early during boot, before mem init or bootmem, to retreive the RTAS
+ * Call early during boot, before mem init or bootmem, to retrieve the RTAS
* informations from the device-tree and allocate the RMO buffer for userland
* accesses.
*/
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 98e9f05..81567e9 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -438,7 +438,7 @@ void __init setup_system(void)
/*
* Fill the ppc64_caches & systemcfg structures with informations
- * retreived from the device-tree. Need to be called before
+ * retrieved from the device-tree. Need to be called before
* finish_device_tree() since the later requires some of the
* informations filled up here to properly parse the interrupt
* tree.
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 5bb433c..149351a 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -368,7 +368,7 @@ static unsigned long __init htab_get_tab
unsigned long mem_size, rnd_mem_size, pteg_count;
/* If hash size isn't already provided by the platform, we try to
- * retreive it from the device-tree. If it's not there neither, we
+ * retrieve it from the device-tree. If it's not there neither, we
* calculate it now based on the total RAM size
*/
if (ppc64_pft_size == 0)
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index a4b50c4..a415e8d 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -80,7 +80,7 @@ static struct freq_attr* g5_cpu_freqs_at
};
/* Power mode data is an array of the 32 bits PCR values to use for
- * the various frequencies, retreived from the device-tree
+ * the various frequencies, retrieved from the device-tree
*/
static u32 *g5_pmode_data;
static int g5_pmode_max;
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index cb6e38e..937d81f 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -201,7 +201,7 @@ again:
if ((signed long)(get_ccount() - next) > 0)
goto again;
- /* Allow platform to do something usefull (Wdog). */
+ /* Allow platform to do something useful (Wdog). */
platform_heartbeat();
diff --git a/drivers/cdrom/cm206.c b/drivers/cdrom/cm206.c
index 01f0351..ce127f7 100644
--- a/drivers/cdrom/cm206.c
+++ b/drivers/cdrom/cm206.c
@@ -32,7 +32,7 @@ History:
18 mrt 1995: 0.24 Working background read-ahead. (still problems)
26 mrt 1995: 0.25 Multi-session ioctl added (kernel v1.2).
Statistics implemented, though separate stats206.h.
- Accessible trough ioctl 0x1000 (just a number).
+ Accessible through ioctl 0x1000 (just a number).
Hard to choose between v1.2 development and 1.1.75.
Bottom-half doesn't work with 1.2...
0.25a: fixed... typo. Still problems...
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 8d0958c..4f50ee5 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -630,12 +630,12 @@ static int read_eeprom(int cpu, struct m
sprintf(nodename, "/u3@0,f8000000/i2c@f8001000/cpuid@a%d", cpu ? 2 : 0);
np = of_find_node_by_path(nodename);
if (np == NULL) {
- printk(KERN_ERR "therm_pm72: Failed to retreive cpuid node from device-tree\n");
+ printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid node from device-tree\n");
return -ENODEV;
}
data = (u8 *)get_property(np, "cpuid", &len);
if (data == NULL) {
- printk(KERN_ERR "therm_pm72: Failed to retreive cpuid property from device-tree\n");
+ printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid property from device-tree\n");
of_node_put(np);
return -ENODEV;
}
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
index 80ddf97..eb69a60 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -26,7 +26,7 @@
* (typically the drive fan)
* - the main control (first control) gets the target value scaled with
* the first pair of factors, and is then modified as below
- * - the value of the target of the CPU Fan control loop is retreived,
+ * - the value of the target of the CPU Fan control loop is retrieved,
* scaled with the second pair of factors, and the max of that and
* the scaled target is applied to the main control.
*
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index 26632ce..099ffb3 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -48,7 +48,7 @@ static int io = 0x384;
static int radio_nr = -1;
/* hw precision is 12.5 kHz
- * It is only usefull to give freq in intervall of 200 (=0.0125Mhz),
+ * It is only useful to give freq in intervall of 200 (=0.0125Mhz),
* other bits will be truncated
*/
#define RSF16_ENCODE(x) ((x)/200+856)
diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl
index 73dd084..65c0c47 100644
--- a/drivers/message/i2o/README.ioctl
+++ b/drivers/message/i2o/README.ioctl
@@ -185,7 +185,7 @@ VII. Getting Parameters
ENOMEM Kernel memory allocation error
A return value of 0 does not mean that the value was actually
- properly retreived. The user should check the result list
+ properly retrieved. The user should check the result list
to determine the specific status of the transaction.
VIII. Downloading Software
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index e92c17f..55c7ed6 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -276,7 +276,7 @@ static void hp100_RegisterDump(struct ne
* Convert an address in a kernel buffer to a bus/phys/dma address.
* This work *only* for memory fragments part of lp->page_vaddr,
* because it was properly DMA allocated via pci_alloc_consistent(),
- * so we just need to "retreive" the original mapping to bus/phys/dma
+ * so we just need to "retrieve" the original mapping to bus/phys/dma
* address - Jean II */
static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 * ptr)
{
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 049c34b..593d8ad 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1598,7 +1598,7 @@ do_ioctl(struct net_device *dev, struct
switch(cmd) {
case SIOCGMIIPHY: /* Get the address of the PHY in use. */
data[0] = 0; /* we have only this address */
- /* fall trough */
+ /* fall through */
case SIOCGMIIREG: /* Read the specified MII register. */
data[3] = mii_rd(ioaddr, data[0] & 0x1f, data[1] & 0x1f);
break;
diff --git a/drivers/net/sk98lin/skdim.c b/drivers/net/sk98lin/skdim.c
index 0fddf61..07c1b4c 100644
--- a/drivers/net/sk98lin/skdim.c
+++ b/drivers/net/sk98lin/skdim.c
@@ -180,7 +180,7 @@ SkDimModerate(SK_AC *pAC) {
/*
** The number of interrupts per sec is the same as expected.
** Evalulate the descriptor-ratio. If it has changed, a resize
- ** in the moderation timer might be usefull
+ ** in the moderation timer might be useful
*/
if (M_DIMINFO.AutoSizing) {
ResizeDimTimerDuration(pAC);
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 197edd7..a5f2b1e 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -2851,7 +2851,7 @@ unsigned long Flags; /* for spin lock
* Description:
* This function is called if an ioctl is issued on the device.
* There are three subfunction for reading, writing and test-writing
- * the private MIB data structure (usefull for SysKonnect-internal tools).
+ * the private MIB data structure (useful for SysKonnect-internal tools).
*
* Returns:
* 0, if everything is ok
diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c
index 58e1a5b..a386172 100644
--- a/drivers/net/sk98lin/skgepnmi.c
+++ b/drivers/net/sk98lin/skgepnmi.c
@@ -611,7 +611,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in
* Description:
* Calls a general sub-function for all this stuff. The preset does
* the same as a set, but returns just before finally setting the
- * new value. This is usefull to check if a set might be successfull.
+ * new value. This is useful to check if a set might be successfull.
* If the instance -1 is passed, an array of values is supposed and
* all instances of the OID will be set.
*
@@ -654,7 +654,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in
* Description:
* Calls a general sub-function for all this stuff. The preset does
* the same as a set, but returns just before finally setting the
- * new value. This is usefull to check if a set might be successfull.
+ * new value. This is useful to check if a set might be successfull.
* If the instance -1 is passed, an array of values is supposed and
* all instances of the OID will be set.
*
@@ -870,7 +870,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in
* Description:
* Calls a general sub-function for all this set stuff. The preset does
* the same as a set, but returns just before finally setting the
- * new value. This is usefull to check if a set might be successfull.
+ * new value. This is useful to check if a set might be successfull.
* The sub-function runs through the IdTable, checks which OIDs are able
* to set, and calls the handler function of the OID to perform the
* preset. The return value of the function will also be stored in
@@ -6473,7 +6473,7 @@ unsigned int PhysPortIndex) /* Physical
*
* Description:
* The COMMON module only tells us if the mode is half or full duplex.
- * But in the decade of auto sensing it is usefull for the user to
+ * But in the decade of auto sensing it is useful for the user to
* know if the mode was negotiated or forced. Therefore we have a
* look to the mode, which was last used by the negotiation process.
*
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 95bd07b..315be47 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -347,7 +347,7 @@ static void led_LCD_driver(unsigned char
**
** led_get_net_activity()
**
- ** calculate if there was TX- or RX-troughput on the network interfaces
+ ** calculate if there was TX- or RX-throughput on the network interfaces
** (analog to dev_get_info() from net/core/dev.c)
**
*/
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index ed1899d..be3fd9b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -11,14 +11,14 @@ config USB_EHCI_HCD
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
If your USB host controller supports USB 2.0, you will likely want to
- configure this Host Controller Driver. At this writing, the primary
- implementation of EHCI is a chip from NEC, widely available in add-on
- PCI cards, but implementations are in the works from other vendors
- including Intel and Philips. Motherboard support is appearing.
+ configure this Host Controller Driver. At the time of this writing,
+ the primary implementation of EHCI is a chip from NEC, widely available
+ in add-on PCI cards, but implementations are in the works from other
+ vendors including Intel and Philips. Motherboard support is appearing.
EHCI controllers are packaged with "companion" host controllers (OHCI
or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
- will connect to EHCI if it the device is high speed, otherwise they
+ will connect to EHCI if the device is high speed, otherwise they
connect to a companion controller. If you configure EHCI, you should
probably configure the OHCI (for NEC and some other vendors) USB Host
Controller Driver or UHCI (for Via motherboards) Host Controller
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index af18355..4e9637e 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -357,7 +357,7 @@ static int cypress_serial_control (struc
} while (retval != 5 && retval != ENODEV);
if (retval != 5) {
- err("%s - failed to retreive serial line settings - %d", __FUNCTION__, retval);
+ err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval);
return retval;
} else {
spin_lock_irqsave(&priv->lock, flags);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 8bc8337..4dd6865 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -584,7 +584,7 @@ static struct usb_serial_driver *search_
const struct usb_device_id *id;
struct usb_serial_driver *t;
- /* List trough know devices and see if the usb id matches */
+ /* Check if the usb id matches a known device */
list_for_each(p, &usb_serial_driver_list) {
t = list_entry(p, struct usb_serial_driver, driver_list);
id = usb_match_id(iface, t->id_table);
diff --git a/drivers/video/aty/radeon_monitor.c b/drivers/video/aty/radeon_monitor.c
index ea7c863..7f9838d 100644
--- a/drivers/video/aty/radeon_monitor.c
+++ b/drivers/video/aty/radeon_monitor.c
@@ -423,7 +423,7 @@ static int __devinit radeon_parse_monito
/*
* Probe display on both primary and secondary card's connector (if any)
* by various available techniques (i2c, OF device tree, BIOS, ...) and
- * try to retreive EDID. The algorithm here comes from XFree's radeon
+ * try to retrieve EDID. The algorithm here comes from XFree's radeon
* driver
*/
void __devinit radeon_probe_screens(struct radeonfb_info *rinfo,
diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile
index d0244c0..4ef5cd1 100644
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -16,7 +16,7 @@ obj-$(CONFIG_LOGO_M32R_CLUT224) += logo
# How to generate logo's
-# Use logo-cfiles to retreive list of .c files to be built
+# Use logo-cfiles to retrieve list of .c files to be built
logo-cfiles = $(notdir $(patsubst %.$(2), %.c, \
$(wildcard $(srctree)/$(src)/*$(1).$(2))))
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 9a1e00d..4baf61a 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -3,7 +3,7 @@ menu "Dallas's 1-wire bus"
config W1
tristate "Dallas's 1-wire support"
---help---
- Dallas's 1-wire bus is usefull to connect slow 1-pin devices
+ Dallas's 1-wire bus is useful to connect slow 1-pin devices
such as iButtons and thermal sensors.
If you want W1 support, you should say Y here.
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index d933ef1..a17b288 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -663,7 +663,7 @@ v9fs_vfs_rename(struct inode *old_dir, s
}
/**
- * v9fs_vfs_getattr - retreive file metadata
+ * v9fs_vfs_getattr - retrieve file metadata
* @mnt - mount information
* @dentry - file to get attributes on
* @stat - metadata structure to populate
diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h
index 134c2b5..82ce476 100644
--- a/include/asm-powerpc/smu.h
+++ b/include/asm-powerpc/smu.h
@@ -22,7 +22,7 @@
/*
* Partition info commands
*
- * These commands are used to retreive the sdb-partition-XX datas from
+ * These commands are used to retrieve the sdb-partition-XX datas from
* the SMU. The lenght is always 2. First byte is the subcommand code
* and second byte is the partition ID.
*
@@ -225,7 +225,7 @@
*
* SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to
* transfer blocks of data from the SMU. So far, I've decrypted it's
- * usage to retreive partition data. In order to do that, you have to
+ * usage to retrieve partition data. In order to do that, you have to
* break your transfer in "chunks" since that command cannot transfer
* more than a chunk at a time. The chunk size used by OF is 0xe bytes,
* but it seems that the darwin driver will let you do 0x1e bytes if
@@ -556,7 +556,7 @@ struct smu_user_cmd_hdr
__u32 cmdtype;
#define SMU_CMDTYPE_SMU 0 /* SMU command */
#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */
-#define SMU_CMDTYPE_GET_PARTITION 2 /* retreive an sdb partition */
+#define SMU_CMDTYPE_GET_PARTITION 2 /* retrieve an sdb partition */
__u8 cmd; /* SMU command byte */
__u8 pad[3]; /* padding */
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index 4a6f50e..23fe746 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -66,7 +66,7 @@ struct elevator_type
};
/*
- * each queue has an elevator_queue assoicated with it
+ * each queue has an elevator_queue associated with it
*/
struct elevator_queue
{
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
index e7fa29e..77f3046 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
@@ -995,7 +995,7 @@ static int tcp_packet(struct ip_conntrac
|| (!test_bit(IPS_ASSURED_BIT, &conntrack->status)
&& conntrack->proto.tcp.last_index == TCP_ACK_SET))
&& ntohl(th->ack_seq) == conntrack->proto.tcp.last_end) {
- /* RST sent to invalid SYN or ACK we had let trough
+ /* RST sent to invalid SYN or ACK we had let through
* at a) and c) above:
*
* a) SYN was in window then
@@ -1006,7 +1006,7 @@ static int tcp_packet(struct ip_conntrac
* segments we ignored. */
goto in_window;
}
- /* Just fall trough */
+ /* Just fall through */
default:
/* Keep compilers happy. */
break;
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 6167137..9a1348a 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -988,7 +988,7 @@ static int tcp_packet(struct nf_conn *co
|| (!test_bit(IPS_ASSURED_BIT, &conntrack->status)
&& conntrack->proto.tcp.last_index == TCP_ACK_SET))
&& ntohl(th->ack_seq) == conntrack->proto.tcp.last_end) {
- /* RST sent to invalid SYN or ACK we had let trough
+ /* RST sent to invalid SYN or ACK we had let through
* at a) and c) above:
*
* a) SYN was in window then
@@ -999,7 +999,7 @@ static int tcp_packet(struct nf_conn *co
* segments we ignored. */
goto in_window;
}
- /* Just fall trough */
+ /* Just fall through */
default:
/* Keep compilers happy. */
break;
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 0c4f3a9..bf96a61 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -30,7 +30,7 @@
# - See include/linux/module.h for more details
# Step 4 is solely used to allow module versioning in external modules,
-# where the CRC of each module is retreived from the Module.symers file.
+# where the CRC of each module is retrieved from the Module.symers file.
.PHONY: _modpost
_modpost: __modpost
diff --git a/scripts/mksysmap b/scripts/mksysmap
index a6430e0..4390fab 100644
--- a/scripts/mksysmap
+++ b/scripts/mksysmap
@@ -1,7 +1,7 @@
#!/bin/sh -x
# Based on the vmlinux file create the System.map file
# System.map is used by module-init tools and some debugging
-# tools to retreive the actual addresses of symbols in the kernel.
+# tools to retrieve the actual addresses of symbols in the kernel.
#
# Usage
# mksysmap vmlinux System.map
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
index 09cb250..962e6d5 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
@@ -209,7 +209,7 @@ static int pdacf_pcm_prepare(struct snd_
case SNDRV_PCM_FORMAT_S24_3LE:
case SNDRV_PCM_FORMAT_S24_3BE:
chip->pcm_sample = 3;
- /* fall trough */
+ /* fall through */
default: /* 24-bit */
aval = AK4117_DIF_24R;
chip->pcm_frame = 3;
^ permalink raw reply related [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2006-01-03 13:19 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2006-01-03 13:19 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Andrew Morton, LKML
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following changes:
Adam D. Moss:
update for Documentation/sysrq.txt
Adrian Bunk:
remove pointers to the defunct UDF mailing list
fs/qnx4/bitmap.c: #if 0 qnx4_new_block()
update the email address of Randy Dunlap
arch/arm26/nwfpe/fpmodule.c: remove kernel 2.0 #ifdef
Jim Cromie:
Documentation/filesystems/vfs.txt: typo fix
Kees Cook:
Documentation/SubmittingPatches: update Trivial Patch Monkey information
Matt Mackall:
s/retreiv/retriev/g
Paolo 'Blaisorblade' Giarrusso:
Documentation/filesystems/00-INDEX: remove entry for fat_cvf.txt
Documentation/SubmittingPatches | 4 ++--
Documentation/block/biodoc.txt | 2 +-
Documentation/filesystems/00-INDEX | 2 --
Documentation/filesystems/vfs.txt | 5 ++---
Documentation/scsi/scsi_mid_low_api.txt | 2 +-
Documentation/sysrq.txt | 6 +-----
MAINTAINERS | 4 +---
arch/arm26/nwfpe/fpmodule.c | 3 +--
drivers/char/n_hdlc.c | 2 +-
drivers/net/tlan.c | 4 ++--
drivers/usb/class/usblp.c | 2 +-
drivers/usb/serial/ftdi_sio.h | 2 +-
drivers/video/aty/radeon_base.c | 16 ++++++++--------
fs/ntfs/ChangeLog | 2 +-
fs/qnx4/bitmap.c | 2 ++
fs/reiserfs/xattr.c | 4 ++--
fs/udf/balloc.c | 5 -----
fs/udf/crc.c | 5 -----
fs/udf/dir.c | 5 -----
fs/udf/directory.c | 5 -----
fs/udf/file.c | 5 -----
fs/udf/fsync.c | 5 -----
fs/udf/ialloc.c | 5 -----
fs/udf/inode.c | 5 -----
fs/udf/lowlevel.c | 5 -----
fs/udf/misc.c | 5 -----
fs/udf/namei.c | 5 -----
fs/udf/partition.c | 5 -----
fs/udf/super.c | 5 -----
fs/udf/symlink.c | 5 -----
fs/udf/truncate.c | 5 -----
fs/udf/unicode.c | 5 -----
include/linux/udf_fs.h | 5 -----
include/linux/udf_fs_i.h | 5 -----
include/linux/udf_fs_sb.h | 5 -----
kernel/configs.c | 2 +-
net/irda/iriap.c | 2 +-
scripts/binoffset.c | 2 +-
scripts/checkversion.pl | 2 +-
scripts/kconfig/util.c | 2 +-
scripts/patch-kernel | 4 ++--
41 files changed, 34 insertions(+), 137 deletions(-)
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 237d54c..1d47e6c 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -158,7 +158,7 @@ Even if the maintainer did not respond i
copy the maintainer when you change their code.
For small patches you may want to CC the Trivial Patch Monkey
-trivial@rustcorp.com.au set up by Rusty Russell; which collects "trivial"
+trivial@kernel.org managed by Adrian Bunk; which collects "trivial"
patches. Trivial patches must qualify for one of the following rules:
Spelling fixes in documentation
Spelling fixes which could break grep(1).
@@ -171,7 +171,7 @@ patches. Trivial patches must qualify fo
since people copy, as long as it's trivial)
Any fix by the author/maintainer of the file. (ie. patch monkey
in re-transmission mode)
-URL: <http://www.kernel.org/pub/linux/kernel/people/rusty/trivial/>
+URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 0fe01c8..303c57a 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -31,7 +31,7 @@ The following people helped with review
document:
Christoph Hellwig <hch@infradead.org>
Arjan van de Ven <arjanv@redhat.com>
- Randy Dunlap <rddunlap@osdl.org>
+ Randy Dunlap <rdunlap@xenotime.net>
Andre Hedrick <andre@linux-ide.org>
The following people helped with fixes/contributions to the bio patches
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index bcfbab8..7e17712 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -18,8 +18,6 @@ devfs/
- directory containing devfs documentation.
ext2.txt
- info, mount options and specifications for the Ext2 filesystem.
-fat_cvf.txt
- - info on the Compressed Volume Files extension to the FAT filesystem
hpfs.txt
- info and mount options for the OS/2 HPFS.
isofs.txt
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index ee4c0a8..e56e842 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -162,9 +162,8 @@ get_sb() method fills in is the "s_op" f
a "struct super_operations" which describes the next level of the
filesystem implementation.
-Usually, a filesystem uses generic one of the generic get_sb()
-implementations and provides a fill_super() method instead. The
-generic methods are:
+Usually, a filesystem uses one of the generic get_sb() implementations
+and provides a fill_super() method instead. The generic methods are:
get_sb_bdev: mount a filesystem residing on a block device
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index 66565d4..3209b37 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -1433,7 +1433,7 @@ The following people have contributed to
Christoph Hellwig <hch at infradead dot org>
Doug Ledford <dledford at redhat dot com>
Andries Brouwer <Andries dot Brouwer at cwi dot nl>
- Randy Dunlap <rddunlap at osdl dot org>
+ Randy Dunlap <rdunlap at xenotime dot net>
Alan Stern <stern at rowland dot harvard dot edu>
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index baf17b3..ad0bedf 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -202,17 +202,13 @@ you must call __handle_sysrq_nolock inst
* I have more questions, who can I ask?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-You may feel free to send email to myrdraal@deathsdoor.com, and I will
-respond as soon as possible.
- -Myrdraal
-
And I'll answer any questions about the registration system you got, also
responding as soon as possible.
-Crutcher
* Credits
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Written by Mydraal <myrdraal@deathsdoor.com>
+Written by Mydraal <vulpyne@vulpyne.net>
Updated by Adam Sulmicki <adam@cfar.umd.edu>
Updated by Jeremy M. Dolan <jmd@turbogeek.org> 2001/01/28 10:15:59
Added to by Crutcher Dunnavant <crutcher+kernel@datastacks.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index 6af6830..79f0efa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1465,7 +1465,6 @@ P: Several
L: kernel-janitors@osdl.org
W: http://www.kerneljanitors.org/
W: http://sf.net/projects/kernel-janitor/
-W: http://developer.osdl.org/rddunlap/kj-patches/
S: Maintained
KERNEL NFSD
@@ -1486,7 +1485,7 @@ KEXEC
P: Eric Biederman
P: Randy Dunlap
M: ebiederm@xmission.com
-M: rddunlap@osdl.org
+M: rdunlap@xenotime.net
W: http://www.xmission.com/~ebiederm/files/kexec/
L: linux-kernel@vger.kernel.org
L: fastboot@osdl.org
@@ -2587,7 +2586,6 @@ S: Maintained
UDF FILESYSTEM
P: Ben Fennema
M: bfennema@falcon.csc.calpoly.edu
-L: linux_udf@hpesjro.fc.hp.com
W: http://linux-udf.sourceforge.net
S: Maintained
diff --git a/arch/arm26/nwfpe/fpmodule.c b/arch/arm26/nwfpe/fpmodule.c
index 528fa71..5258c60 100644
--- a/arch/arm26/nwfpe/fpmodule.c
+++ b/arch/arm26/nwfpe/fpmodule.c
@@ -46,10 +46,9 @@ typedef struct task_struct* PTASK;
#ifdef MODULE
void fp_send_sig(unsigned long sig, PTASK p, int priv);
-#if LINUX_VERSION_CODE > 0x20115
+
MODULE_AUTHOR("Scott Bambrough <scottb@rebel.com>");
MODULE_DESCRIPTION("NWFPE floating point emulator");
-#endif
#else
#define fp_send_sig send_sig
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index c3660d8..a133a62 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -562,7 +562,7 @@ static void n_hdlc_tty_receive(struct tt
} /* end of n_hdlc_tty_receive() */
/**
- * n_hdlc_tty_read - Called to retreive one frame of data (if available)
+ * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
* @tty - pointer to tty instance data
* @file - pointer to open file object
* @buf - pointer to returned data buffer
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 942fae0..c2506b5 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -2865,11 +2865,11 @@ void TLan_PhyMonitor( struct net_device
* for this device.
* phy The address of the PHY to be queried.
* reg The register whose contents are to be
- * retreived.
+ * retrieved.
* val A pointer to a variable to store the
* retrieved value.
*
- * This function uses the TLAN's MII bus to retreive the contents
+ * This function uses the TLAN's MII bus to retrieve the contents
* of a given register on a PHY. It sends the appropriate info
* and then reads the 16-bit register value from the MII bus via
* the TLAN SIO register.
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 357e753..38f905d 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -3,7 +3,7 @@
*
* Copyright (c) 1999 Michael Gee <michael@linuxspecific.com>
* Copyright (c) 1999 Pavel Machek <pavel@suse.cz>
- * Copyright (c) 2000 Randy Dunlap <rddunlap@osdl.org>
+ * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net>
* Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
# Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com>
# Copyright (c) 2001 David Paschal <paschal@rcsis.com>
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 773ea3e..da004dd 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -714,7 +714,7 @@ typedef enum {
*/
/* FTDI_SIO_GET_MODEM_STATUS */
-/* Retreive the current value of the modem status register */
+/* Retrieve the current value of the modem status register */
#define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0
#define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 4f01ccc..156db84 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -594,7 +594,7 @@ static int __devinit radeon_probe_pll_pa
}
/*
- * Retreive PLL infos by different means (BIOS, Open Firmware, register probing...)
+ * Retrieve PLL infos by different means (BIOS, Open Firmware, register probing...)
*/
static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo)
{
@@ -660,17 +660,17 @@ static void __devinit radeon_get_pllinfo
#ifdef CONFIG_PPC_OF
/*
- * Retreive PLL infos from Open Firmware first
+ * Retrieve PLL infos from Open Firmware first
*/
if (!force_measure_pll && radeon_read_xtal_OF(rinfo) == 0) {
- printk(KERN_INFO "radeonfb: Retreived PLL infos from Open Firmware\n");
+ printk(KERN_INFO "radeonfb: Retrieved PLL infos from Open Firmware\n");
goto found;
}
#endif /* CONFIG_PPC_OF */
/*
* Check out if we have an X86 which gave us some PLL informations
- * and if yes, retreive them
+ * and if yes, retrieve them
*/
if (!force_measure_pll && rinfo->bios_seg) {
u16 pll_info_block = BIOS_IN16(rinfo->fp_bios_start + 0x30);
@@ -682,7 +682,7 @@ static void __devinit radeon_get_pllinfo
rinfo->pll.ppll_min = BIOS_IN32(pll_info_block + 0x12);
rinfo->pll.ppll_max = BIOS_IN32(pll_info_block + 0x16);
- printk(KERN_INFO "radeonfb: Retreived PLL infos from BIOS\n");
+ printk(KERN_INFO "radeonfb: Retrieved PLL infos from BIOS\n");
goto found;
}
@@ -691,7 +691,7 @@ static void __devinit radeon_get_pllinfo
* probe them
*/
if (radeon_probe_pll_params(rinfo) == 0) {
- printk(KERN_INFO "radeonfb: Retreived PLL infos from registers\n");
+ printk(KERN_INFO "radeonfb: Retrieved PLL infos from registers\n");
goto found;
}
@@ -702,7 +702,7 @@ static void __devinit radeon_get_pllinfo
found:
/*
- * Some methods fail to retreive SCLK and MCLK values, we apply default
+ * Some methods fail to retrieve SCLK and MCLK values, we apply default
* settings in this case (200Mhz). If that really happne often, we could
* fetch from registers instead...
*/
@@ -2393,7 +2393,7 @@ static int radeonfb_pci_register (struct
rinfo->mapped_vram/1024);
/*
- * Map the BIOS ROM if any and retreive PLL parameters from
+ * Map the BIOS ROM if any and retrieve PLL parameters from
* the BIOS. We skip that on mobility chips as the real panel
* values we need aren't in the ROM but in the BIOS image in
* memory. This is definitely not the best meacnism though,
diff --git a/fs/ntfs/ChangeLog b/fs/ntfs/ChangeLog
index 50a7749..02f4409 100644
--- a/fs/ntfs/ChangeLog
+++ b/fs/ntfs/ChangeLog
@@ -884,7 +884,7 @@ ToDo/Notes:
- Add handling for initialized_size != data_size in compressed files.
- Reduce function local stack usage from 0x3d4 bytes to just noise in
- fs/ntfs/upcase.c. (Randy Dunlap <rddunlap@osdl.ord>)
+ fs/ntfs/upcase.c. (Randy Dunlap <rdunlap@xenotime.net>)
- Remove compiler warnings for newer gcc.
- Pages are no longer kmapped by mm/filemap.c::generic_file_write()
around calls to ->{prepare,commit}_write. Adapt NTFS appropriately
diff --git a/fs/qnx4/bitmap.c b/fs/qnx4/bitmap.c
index 9912539..46efbf5 100644
--- a/fs/qnx4/bitmap.c
+++ b/fs/qnx4/bitmap.c
@@ -23,10 +23,12 @@
#include <linux/buffer_head.h>
#include <linux/bitops.h>
+#if 0
int qnx4_new_block(struct super_block *sb)
{
return 0;
}
+#endif /* 0 */
static void count_bits(register const char *bmPart, register int size,
int *const tf)
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 72e1207..02091ea 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -115,8 +115,8 @@ static struct dentry *__get_xa_root(stru
}
/* Returns the dentry (or NULL) referring to the root of the extended
- * attribute directory tree. If it has already been retreived, it is used.
- * Otherwise, we attempt to retreive it from disk. It may also return
+ * attribute directory tree. If it has already been retrieved, it is used.
+ * Otherwise, we attempt to retrieve it from disk. It may also return
* a pointer-encoded error.
*/
static inline struct dentry *get_xa_root(struct super_block *s)
diff --git a/fs/udf/balloc.c b/fs/udf/balloc.c
index b9ded26..6598a50 100644
--- a/fs/udf/balloc.c
+++ b/fs/udf/balloc.c
@@ -4,11 +4,6 @@
* PURPOSE
* Block allocation handling routines for the OSTA-UDF(tm) filesystem.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/crc.c b/fs/udf/crc.c
index d95c6e3..1b82a4a 100644
--- a/fs/udf/crc.c
+++ b/fs/udf/crc.c
@@ -14,11 +14,6 @@
*
* AT&T gives permission for the free use of the CRC source code.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/dir.c b/fs/udf/dir.c
index 82440b7..f522252 100644
--- a/fs/udf/dir.c
+++ b/fs/udf/dir.c
@@ -4,11 +4,6 @@
* PURPOSE
* Directory handling routines for the OSTA-UDF(tm) filesystem.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/directory.c b/fs/udf/directory.c
index 9a61ecc..fe751a2 100644
--- a/fs/udf/directory.c
+++ b/fs/udf/directory.c
@@ -4,11 +4,6 @@
* PURPOSE
* Directory related functions
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/file.c b/fs/udf/file.c
index 01f520c..8a38828 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -4,11 +4,6 @@
* PURPOSE
* File handling routines for the OSTA-UDF(tm) filesystem.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/fsync.c b/fs/udf/fsync.c
index 2dde6b8..5887d78 100644
--- a/fs/udf/fsync.c
+++ b/fs/udf/fsync.c
@@ -4,11 +4,6 @@
* PURPOSE
* Fsync handling routines for the OSTA-UDF(tm) filesystem.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c
index a7e5d40..c9b707b 100644
--- a/fs/udf/ialloc.c
+++ b/fs/udf/ialloc.c
@@ -4,11 +4,6 @@
* PURPOSE
* Inode allocation handling routines for the OSTA-UDF(tm) filesystem.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index b83890b..4014f17 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -4,11 +4,6 @@
* PURPOSE
* Inode handling routines for the OSTA-UDF(tm) filesystem.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/lowlevel.c b/fs/udf/lowlevel.c
index 2da5087..0842161 100644
--- a/fs/udf/lowlevel.c
+++ b/fs/udf/lowlevel.c
@@ -4,11 +4,6 @@
* PURPOSE
* Low Level Device Routines for the UDF filesystem
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/misc.c b/fs/udf/misc.c
index fd321f9..cc8ca32 100644
--- a/fs/udf/misc.c
+++ b/fs/udf/misc.c
@@ -4,11 +4,6 @@
* PURPOSE
* Miscellaneous routines for the OSTA-UDF(tm) filesystem.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index ac191ed..ca732e7 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -4,11 +4,6 @@
* PURPOSE
* Inode name handling routines for the OSTA-UDF(tm) filesystem.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/partition.c b/fs/udf/partition.c
index 4d36f26..dabf2b8 100644
--- a/fs/udf/partition.c
+++ b/fs/udf/partition.c
@@ -4,11 +4,6 @@
* PURPOSE
* Partition handling routines for the OSTA-UDF(tm) filesystem.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 15bd4f2..4a6f49a 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -14,11 +14,6 @@
* http://www.ecma.ch/
* http://www.iso.org/
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/symlink.c b/fs/udf/symlink.c
index 43f3051..674bb40 100644
--- a/fs/udf/symlink.c
+++ b/fs/udf/symlink.c
@@ -4,11 +4,6 @@
* PURPOSE
* Symlink handling routines for the OSTA-UDF(tm) filesystem.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/truncate.c b/fs/udf/truncate.c
index 7dc8a55..e1b0e8c 100644
--- a/fs/udf/truncate.c
+++ b/fs/udf/truncate.c
@@ -4,11 +4,6 @@
* PURPOSE
* Truncate handling routines for the OSTA-UDF(tm) filesystem.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/fs/udf/unicode.c b/fs/udf/unicode.c
index 5a80efd..706c92e 100644
--- a/fs/udf/unicode.c
+++ b/fs/udf/unicode.c
@@ -11,11 +11,6 @@
* UTF-8 is explained in the IETF RFC XXXX.
* ftp://ftp.internic.net/rfc/rfcxxxx.txt
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team's mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/include/linux/udf_fs.h b/include/linux/udf_fs.h
index 46e2bb9..36c684e 100644
--- a/include/linux/udf_fs.h
+++ b/include/linux/udf_fs.h
@@ -13,11 +13,6 @@
* http://www.osta.org/ * http://www.ecma.ch/
* http://www.iso.org/
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/include/linux/udf_fs_i.h b/include/linux/udf_fs_i.h
index 62b15a4..1e75084 100644
--- a/include/linux/udf_fs_i.h
+++ b/include/linux/udf_fs_i.h
@@ -3,11 +3,6 @@
*
* This file is intended for the Linux kernel/module.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/include/linux/udf_fs_sb.h b/include/linux/udf_fs_sb.h
index 1966a6d..b15ff2e 100644
--- a/include/linux/udf_fs_sb.h
+++ b/include/linux/udf_fs_sb.h
@@ -3,11 +3,6 @@
*
* This include file is for the Linux kernel/module.
*
- * CONTACTS
- * E-mail regarding any portion of the Linux UDF file system should be
- * directed to the development team mailing list (run by majordomo):
- * linux_udf@hpesjro.fc.hp.com
- *
* COPYRIGHT
* This file is distributed under the terms of the GNU General Public
* License (GPL). Copies of the GPL can be obtained from:
diff --git a/kernel/configs.c b/kernel/configs.c
index 986f7af..009e1eb 100644
--- a/kernel/configs.c
+++ b/kernel/configs.c
@@ -3,7 +3,7 @@
* Echo the kernel .config file used to build the kernel
*
* Copyright (C) 2002 Khalid Aziz <khalid_aziz@hp.com>
- * Copyright (C) 2002 Randy Dunlap <rddunlap@osdl.org>
+ * Copyright (C) 2002 Randy Dunlap <rdunlap@xenotime.net>
* Copyright (C) 2002 Al Stone <ahs3@fc.hp.com>
* Copyright (C) 2002 Hewlett-Packard Company
*
diff --git a/net/irda/iriap.c b/net/irda/iriap.c
index b8bb78a..254f907 100644
--- a/net/irda/iriap.c
+++ b/net/irda/iriap.c
@@ -364,7 +364,7 @@ static void iriap_disconnect_request(str
/*
* Function iriap_getvaluebyclass (addr, name, attr)
*
- * Retreive all values from attribute in all objects with given class
+ * Retrieve all values from attribute in all objects with given class
* name
*/
int iriap_getvaluebyclass_request(struct iriap_cb *self,
diff --git a/scripts/binoffset.c b/scripts/binoffset.c
index 591309d..1a2e39b 100644
--- a/scripts/binoffset.c
+++ b/scripts/binoffset.c
@@ -1,6 +1,6 @@
/***************************************************************************
* binoffset.c
- * (C) 2002 Randy Dunlap <rddunlap@osdl.org>
+ * (C) 2002 Randy Dunlap <rdunlap@xenotime.net>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
diff --git a/scripts/checkversion.pl b/scripts/checkversion.pl
index df10db6..9f84e56 100755
--- a/scripts/checkversion.pl
+++ b/scripts/checkversion.pl
@@ -3,7 +3,7 @@
# checkversion find uses of LINUX_VERSION_CODE, KERNEL_VERSION, or
# UTS_RELEASE without including <linux/version.h>, or cases of
# including <linux/version.h> that don't need it.
-# Copyright (C) 2003, Randy Dunlap <rddunlap@osdl.org>
+# Copyright (C) 2003, Randy Dunlap <rdunlap@xenotime.net>
$| = 1;
diff --git a/scripts/kconfig/util.c b/scripts/kconfig/util.c
index 1fa4c0b..4556014 100644
--- a/scripts/kconfig/util.c
+++ b/scripts/kconfig/util.c
@@ -101,7 +101,7 @@ void str_printf(struct gstr *gs, const c
va_end(ap);
}
-/* Retreive value of growable string */
+/* Retrieve value of growable string */
const char *str_get(struct gstr *gs)
{
return gs->s;
diff --git a/scripts/patch-kernel b/scripts/patch-kernel
index f2d47ca..67e4b18 100755
--- a/scripts/patch-kernel
+++ b/scripts/patch-kernel
@@ -45,7 +45,7 @@
# update usage message;
# fix some whitespace damage;
# be smarter about stopping when current version is larger than requested;
-# Randy Dunlap <rddunlap@osdl.org>, 2004-AUG-18.
+# Randy Dunlap <rdunlap@xenotime.net>, 2004-AUG-18.
#
# Add better support for (non-incremental) 2.6.x.y patches;
# If an ending version number if not specified, the script automatically
@@ -56,7 +56,7 @@
# patch-kernel does not normally support reverse patching, but does so when
# applying EXTRAVERSION (x.y) patches, so that moving from 2.6.11.y to 2.6.11.z
# is easy and handled by the script (reverse 2.6.11.y and apply 2.6.11.z).
-# Randy Dunlap <rddunlap@osdl.org>, 2005-APR-08.
+# Randy Dunlap <rdunlap@xenotime.net>, 2005-APR-08.
PNAME=patch-kernel
^ permalink raw reply related [flat|nested] 22+ messages in thread
* please pull from the trivial tree
@ 2005-11-08 16:55 Adrian Bunk
0 siblings, 0 replies; 22+ messages in thread
From: Adrian Bunk @ 2005-11-08 16:55 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Andrew Morton, LKML
Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial.git
This tree contains the following changes:
Documentation/early-userspace/README | 2
MAINTAINERS | 1
drivers/block/floppy.c | 8 -
drivers/char/ftape/lowlevel/ftape-buffer.c | 1
fs/afs/callback.c | 1
fs/befs/attribute.c | 117 ---------------------
fs/freevxfs/vxfs_bmap.c | 1
fs/freevxfs/vxfs_olt.c | 1
fs/ioprio.c | 1
fs/jffs/jffs_fm.c | 1
fs/partitions/ultrix.c | 1
fs/reiserfs/hashes.c | 1
include/linux/idr.h | 6 +
mm/slab.c | 2
14 files changed, 20 insertions(+), 124 deletions(-)
Adrian Bunk:
mm/slab.c: fix a comment typo
MAINTAINERS: PKTCDVD DRIVER: remove entry for a subscribers-only list
fs/freevxfs/: add #include's
jffs_fm.c should #include "intrep.h"
fs/partitions/ultrix.c should #include "ultrix.h"
fs/reiserfs/hashes.c should #include <linux/reiserfs_fs.h>
drivers/char/ftape/lowlevel/ftape-buffer.c should #include "../lowlevel/ftape-buffer.h"
fs/afs/callback.c should #include "cmservice.h"
fs/ioprio.c should #include <linux/syscalls.h>
James Nelson:
floppy: relocate devfs comment
Jim Cromie:
earlyuserspace/README: fix homonym err
Luben Tuikov:
include/linux: enclose idr.h in #ifndef
Will Dyson:
remove unused fs/befs/attribute.c
diff --git a/Documentation/early-userspace/README b/Documentation/early-userspace/README
index 270a88e..cddbac4 100644
--- a/Documentation/early-userspace/README
+++ b/Documentation/early-userspace/README
@@ -28,7 +28,7 @@ the image from specifications.
CPIO ARCHIVE method
You can create a cpio archive that contains the early userspace image.
-Youre cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it
+Your cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it
will be used directly. Only a single cpio file may be specified in
CONFIG_INITRAMFS_SOURCE and directory and file names are not allowed in
combination with a cpio archive.
diff --git a/MAINTAINERS b/MAINTAINERS
index 995bfd8..3028d4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1970,7 +1970,6 @@ PKTCDVD DRIVER
P: Peter Osterlund
M: petero2@telia.com
L: linux-kernel@vger.kernel.org
-L: packet-writing@suse.com
S: Maintained
POSIX CLOCKS and TIMERS
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 5eadbb9..77cfd69 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -98,6 +98,10 @@
*/
/*
+ * 1998/1/21 -- Richard Gooch <rgooch@atnf.csiro.au> -- devfs support
+ */
+
+/*
* 1998/05/07 -- Russell King -- More portability cleanups; moved definition of
* interrupt and dma channel to asm/floppy.h. Cleaned up some formatting &
* use of '0' for NULL.
@@ -158,10 +162,6 @@ static int print_unex = 1;
#define FDPATCHES
#include <linux/fdreg.h>
-/*
- * 1998/1/21 -- Richard Gooch <rgooch@atnf.csiro.au> -- devfs support
- */
-
#include <linux/fd.h>
#include <linux/hdreg.h>
diff --git a/drivers/char/ftape/lowlevel/ftape-buffer.c b/drivers/char/ftape/lowlevel/ftape-buffer.c
index 54af20c..c706ff1 100644
--- a/drivers/char/ftape/lowlevel/ftape-buffer.c
+++ b/drivers/char/ftape/lowlevel/ftape-buffer.c
@@ -33,6 +33,7 @@
#include "../lowlevel/ftape-rw.h"
#include "../lowlevel/ftape-read.h"
#include "../lowlevel/ftape-tracing.h"
+#include "../lowlevel/ftape-buffer.h"
/* DMA'able memory allocation stuff.
*/
diff --git a/fs/afs/callback.c b/fs/afs/callback.c
index 2fd62f8..9cb206e 100644
--- a/fs/afs/callback.c
+++ b/fs/afs/callback.c
@@ -19,6 +19,7 @@
#include "server.h"
#include "vnode.h"
#include "internal.h"
+#include "cmservice.h"
/*****************************************************************************/
/*
diff --git a/fs/befs/attribute.c b/fs/befs/attribute.c
deleted file mode 100644
index e329d72..0000000
--- a/fs/befs/attribute.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * linux/fs/befs/attribute.c
- *
- * Copyright (C) 2002 Will Dyson <will_dyson@pobox.com>
- *
- * Many thanks to Dominic Giampaolo, author of "Practical File System
- * Design with the Be File System", for such a helpful book.
- *
- */
-
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-
-#include "befs.h"
-#include "endian.h"
-
-#define SD_DATA(sd)\
- (void*)((char*)sd + sizeof(*sd) + (sd->name_size - sizeof(sd->name)))
-
-#define SD_NEXT(sd)\
- (befs_small_data*)((char*)sd + sizeof(*sd) + (sd->name_size - \
- sizeof(sd->name) + sd->data_size))
-
-int
-list_small_data(struct super_block *sb, befs_inode * inode, filldir_t filldir);
-
-befs_small_data *
-find_small_data(struct super_block *sb, befs_inode * inode,
- const char *name);
-int
-read_small_data(struct super_block *sb, befs_inode * inode,
- befs_small_data * sdata, void *buf, size_t bufsize);
-
-/**
- *
- *
- *
- *
- *
- */
-befs_small_data *
-find_small_data(struct super_block *sb, befs_inode * inode, const char *name)
-{
- befs_small_data *sdata = inode->small_data;
-
- while (sdata->type != 0) {
- if (strcmp(name, sdata->name) != 0) {
- return sdata;
- }
- sdata = SD_NEXT(sdata);
- }
- return NULL;
-}
-
-/**
- *
- *
- *
- *
- *
- */
-int
-read_small_data(struct super_block *sb, befs_inode * inode,
- const char *name, void *buf, size_t bufsize)
-{
- befs_small_data *sdata;
-
- sdata = find_small_data(sb, inode, name);
- if (sdata == NULL)
- return BEFS_ERR;
- else if (sdata->data_size > bufsize)
- return BEFS_ERR;
-
- memcpy(buf, SD_DATA(sdata), sdata->data_size);
-
- return BEFS_OK;
-}
-
-/**
- *
- *
- *
- *
- *
- */
-int
-list_small_data(struct super_block *sb, befs_inode * inode)
-{
-
-}
-
-/**
- *
- *
- *
- *
- *
- */
-int
-list_attr(struct super_block *sb, befs_inode * inode)
-{
-
-}
-
-/**
- *
- *
- *
- *
- *
- */
-int
-read_attr(struct super_block *sb, befs_inode * inode)
-{
-
-}
diff --git a/fs/freevxfs/vxfs_bmap.c b/fs/freevxfs/vxfs_bmap.c
index d3f6b28..2d71128 100644
--- a/fs/freevxfs/vxfs_bmap.c
+++ b/fs/freevxfs/vxfs_bmap.c
@@ -36,6 +36,7 @@
#include "vxfs.h"
#include "vxfs_inode.h"
+#include "vxfs_extern.h"
#ifdef DIAGNOSTIC
diff --git a/fs/freevxfs/vxfs_olt.c b/fs/freevxfs/vxfs_olt.c
index 1334762..76a0708 100644
--- a/fs/freevxfs/vxfs_olt.c
+++ b/fs/freevxfs/vxfs_olt.c
@@ -36,6 +36,7 @@
#include "vxfs.h"
#include "vxfs_olt.h"
+#include "vxfs_extern.h"
static inline void
diff --git a/fs/ioprio.c b/fs/ioprio.c
index d1c1f2b..4bf1c63 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/ioprio.h>
#include <linux/blkdev.h>
+#include <linux/syscalls.h>
static int set_task_ioprio(struct task_struct *task, int ioprio)
{
diff --git a/fs/jffs/jffs_fm.c b/fs/jffs/jffs_fm.c
index 053e3a9..6da13b3 100644
--- a/fs/jffs/jffs_fm.c
+++ b/fs/jffs/jffs_fm.c
@@ -20,6 +20,7 @@
#include <linux/blkdev.h>
#include <linux/jffs.h>
#include "jffs_fm.h"
+#include "intrep.h"
#if defined(JFFS_MARK_OBSOLETE) && JFFS_MARK_OBSOLETE
static int jffs_mark_obsolete(struct jffs_fmcontrol *fmc, __u32 fm_offset);
diff --git a/fs/partitions/ultrix.c b/fs/partitions/ultrix.c
index 8a8d4d9..ec852c1 100644
--- a/fs/partitions/ultrix.c
+++ b/fs/partitions/ultrix.c
@@ -7,6 +7,7 @@
*/
#include "check.h"
+#include "ultrix.h"
int ultrix_partition(struct parsed_partitions *state, struct block_device *bdev)
{
diff --git a/fs/reiserfs/hashes.c b/fs/reiserfs/hashes.c
index 37c1306..a3ec238 100644
--- a/fs/reiserfs/hashes.c
+++ b/fs/reiserfs/hashes.c
@@ -19,6 +19,7 @@
//
#include <linux/kernel.h>
+#include <linux/reiserfs_fs.h>
#include <asm/types.h>
#include <asm/bug.h>
diff --git a/include/linux/idr.h b/include/linux/idr.h
index 7fb3ff9..d37c8d8 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -8,6 +8,10 @@
* Small id to pointer translation service avoiding fixed sized
* tables.
*/
+
+#ifndef __IDR_H__
+#define __IDR_H__
+
#include <linux/types.h>
#include <linux/bitops.h>
@@ -77,3 +81,5 @@ int idr_get_new_above(struct idr *idp, v
void idr_remove(struct idr *idp, int id);
void idr_destroy(struct idr *idp);
void idr_init(struct idr *idp);
+
+#endif /* __IDR_H__ */
diff --git a/mm/slab.c b/mm/slab.c
index e291f5e..8a73dcf 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -434,7 +434,7 @@ struct kmem_cache {
/* Optimization question: fewer reaps means less
* probability for unnessary cpucache drain/refill cycles.
*
- * OTHO the cpuarrays can contain lots of objects,
+ * OTOH the cpuarrays can contain lots of objects,
* which could lock up otherwise freeable slabs.
*/
#define REAPTIMEOUT_CPUC (2*HZ)
^ permalink raw reply related [flat|nested] 22+ messages in thread
end of thread, other threads:[~2008-02-03 20:18 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-01-15 2:05 please pull from the trivial tree Adrian Bunk
-- strict thread matches above, loose matches on Subject: below --
2008-02-03 20:17 Adrian Bunk
2007-07-22 21:08 Adrian Bunk
2007-05-11 17:15 Adrian Bunk
2007-05-09 9:30 Adrian Bunk
2007-02-18 1:12 Adrian Bunk
2006-12-12 23:48 Adrian Bunk
2006-12-01 11:37 Adrian Bunk
2006-12-01 12:41 ` Tim Schmielau
2006-12-01 12:55 ` Adrian Bunk
2006-12-01 13:08 ` Tim Schmielau
2006-10-03 23:05 Adrian Bunk
2006-06-26 20:26 Adrian Bunk
2006-04-02 14:15 Adrian Bunk
2006-04-01 10:43 Adrian Bunk
2006-03-26 17:31 Adrian Bunk
2006-03-25 10:17 Adrian Bunk
2006-03-22 10:41 Adrian Bunk
2006-01-11 1:31 Adrian Bunk
2006-01-10 0:54 Adrian Bunk
2006-01-03 13:19 Adrian Bunk
2005-11-08 16:55 Adrian Bunk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).