linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* 2.6.24-rc6-mm1
@ 2007-12-23  7:30 Andrew Morton
  2007-12-23 11:04 ` 2.6.24-rc6-mm1 Ingo Molnar
                   ` (20 more replies)
  0 siblings, 21 replies; 146+ messages in thread
From: Andrew Morton @ 2007-12-23  7:30 UTC (permalink / raw)
  To: linux-kernel


ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/

- This kernel doesn't work on i386!

  It oopses late in boot due to an unrevertable change (e3c1b141) in git-x86
  which I stared at for a while then I ran out of time and gave up.

  I would have just abandoned this release until it was fixed but I'll be
  largely offline for ten days starting tomorrow.

  The culprits have been notified and hopefully we'll have a patch for
  hot-fixes/ tomorrow.

  x86_64 and powerpc work OK though.

- git-block is dropped due to more conflicts that I'm prepared to repair
  with git-scsi-misc

- git-perfmon is dropped due to conflicts with git-x86

- git-kgdb is dropped due to conflicts with git-x86

- git-newsetup is dropped due to conflicts with git-x86

- Andi's x86 quilt tree is dropped due to conflicts with git-x86

- Someone broke suspend-to-RAM on the t61p again.  It just instantly resumes
  itself.



Boilerplate:

- See the `hot-fixes' directory for any important updates to this patchset.

- To fetch an -mm tree using git, use (for example)

  git-fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git tag v2.6.16-rc2-mm1
  git-checkout -b local-v2.6.16-rc2-mm1 v2.6.16-rc2-mm1

- -mm kernel commit activity can be reviewed by subscribing to the
  mm-commits mailing list.

        echo "subscribe mm-commits" | mail majordomo@vger.kernel.org

- If you hit a bug in -mm and it is not obvious which patch caused it, it is
  most valuable if you can perform a bisection search to identify which patch
  introduced the bug.  Instructions for this process are at

        http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt

  But beware that this process takes some time (around ten rebuilds and
  reboots), so consider reporting the bug first and if we cannot immediately
  identify the faulty patch, then perform the bisection search.

- When reporting bugs, please try to Cc: the relevant maintainer and mailing
  list on any email.

- When reporting bugs in this kernel via email, please also rewrite the
  email Subject: in some manner to reflect the nature of the bug.  Some
  developers filter by Subject: when looking for messages to read.

- Occasional snapshots of the -mm lineup are uploaded to
  ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on
  the mm-commits list.  These probably are at least compilable.

- More-than-daily -mm snapshots may be found at
  http://userweb.kernel.org/~akpm/mmotm/.  These are almost certainly not
  compileable.



Changes since 2.6.24-rc5-mm1:


 origin.patch
 git-acpi.patch
 git-alsa.patch
 git-agpgart.patch
 git-arm.patch
 git-avr32.patch
 git-cpufreq.patch
 git-powerpc.patch
 git-drm.patch
 git-dvb.patch
 git-hwmon.patch
 git-gfs2-nmw.patch
 git-hid.patch
 git-hrt.patch
 git-ieee1394.patch
 git-infiniband.patch
 git-input.patch
 git-jfs.patch
 git-kbuild.patch
 git-kvm.patch
 git-lblnet.patch
 git-leds.patch
 git-libata-all.patch
 git-md-accel.patch
 git-mips.patch
 git-mmc.patch
 git-mtd.patch
 git-ubi.patch
 git-net.patch
 git-net-fixup.patch
 git-netdev-all.patch
 git-battery.patch
 git-nfsd.patch
 git-ocfs2.patch
 git-selinux.patch
 git-s390.patch
 git-sched.patch
 git-sched-fixup.patch
 git-sh.patch
 git-scsi-misc.patch
 git-unionfs.patch
 git-v9fs.patch
 git-watchdog.patch
 git-watchdog-fixup.patch
 git-wireless.patch
 git-ipwireless_cs.patch
 git-x86.patch
 git-x86-fixup.patch
 git-xfs.patch
 git-cryptodev.patch
 git-cryptodev-fixup.patch
 git-xtensa.patch

 git trees

-revert-hibernation-use-temporary-page-tables-for-kernel-text-mapping-on-x86_64.patch
-uml-stop-gdb-from-deleting-breakpoints-when-running-uml.patch
-alpha-strncpy-strncat-fixes.patch
-rtc-at32ap700x-fix-irq-init-oops.patch
-parport-dev-timeslice-is-an-unsigned-long-not-an-int.patch
-ecryptfs-initialize-new-auth_tokens-before-teardown.patch
-knfsd-change-mailing-list-for-nfsd-in-maintainers.patch
-fix-lguest-documentation.patch
-sparsemem-make-sparsemem_vmemmap-selectable.patch
-fs-kconfig-grammar-fix.patch
-ext3-ext4-avoid-divide-by-zero.patch
-alpha-build-fixes.patch
-git-acpi-ia64-build-fix.patch
-git-acpi-build-fix.patch
-acpi-add-reboot-mechanism.patch
-acpi-cleanup-linux-acpih.patch
-alsa-nopage.patch
-alsa-usx2y-nopage.patch
-drivers-char-remove-unnecessary-pci_dev_put.patch
-git-cpufreq-query_current_values_with_pending_wait-build-fix.patch
-agk-dm-dm-table-detect-io-beyond-device.patch
-agk-dm-dm-mpath-hp-requires-scsi.patch
-agk-dm-dm-crypt-fix-write-endio.patch
-agk-dm-dm-trigger-change-uevent-on-rename.patch
-agk-dm-dm-merge-max_hw_sector.patch
-agk-dm-dm-crypt-use-bio_add_page.patch
-agk-dm-dm-ioctl-move-compat-code-fix.patch
-dm-persistent_read_metadata-warning-fix.patch
-arch-powerpc-remove-duplicate-includes.patch
-arch-ppc-remove-duplicate-includes.patch
-arch-ppc-remove-an-unnecessary-pci_dev_put.patch
-powerpc-kill-non-existent-symbols-from-ksyms-and-commproch.patch
-powerpc-fix-typo-ifdef-ifndef.patch
-powerpc-add-support-for-porta-and-portb-odr-registers.patch
-powerpc-stop-the-toc-overflowing-for-large-builds.patch
-ppc-fix-missed-increment-on-device-interface-counter.patch
-ppc-chrp-fix-possible-null-pointer-dereference.patch
-ppc-chrp-fix-possible-null-pointer-dereference-checkpatch-fixes.patch
-powerpc-dont-cast-a-pointer-to-pointer-of-list_head.patch
-arch-powerpc-add-missing-of_node_put.patch
-arch-powerpc-platforms-cell-cbe_regsc-add-missing-of_node_put.patch
-gregkh-driver-kobject-fix-the-documentation-of-how-kobject_set_name-works.patch
-revert-gregkh-driver-pm-acquire-device-locks-prior-to-suspending.patch
-gregkh-driver-kset-convert-acpi-to-use-kset_create.patch
-gregkh-driver-kobject-remove-old-outdated-documentation.patch
-gregkh-driver-kobject-update-the-kobject-kset-documentation.patch
-gregkh-driver-kobject-add-sample-code-for-how-to-use-kobjects-in-a-simple-manner.patch
-gregkh-driver-kobject-add-sample-code-for-how-to-use-ksets-ktypes-kobjects.patch
-gregkh-driver-kobject-warn.patch
-mga_dma-return-err-not-just-zero-from-mga_do_cleanup_dma.patch
-drm-dont-cast-a-pointer-to-pointer-of-list_head.patch
-git-dvb-fix-build-in-drivers-media-dvb-frontends-tda18271h.patch
-git-dvb-one-videobuf_read_start-is-enough.patch
-git-dvb-drivers-media-dvb-frontends-zl10353c-avoid-64-bit-divide.patch
-git-dvb-drivers-media-video-et61x251-et61x251_corec-fix-warnings.patch
-media-video-usbvision-add-mutex_unlock-to-error-paths.patch
-media-video-usbvision-add-mutex_unlock-to-error-paths-fix.patch
-media-video-usbvision-remove-ctrlurblock.patch
-i2c-fix-drivers-media-video-bt866c.patch
-gfs2-avoid-64-bit-divide.patch
-ia64-slim-down-__clear_bit_unlock.patch
-ia64-signal-remove-redundant-code-in-setup_sigcontext.patch
-ia64-ia32-nopage.patch
-ieee1394-nopage.patch
-ib-nopage.patch
-fix-build-failure-when-config_infiniband_ipoib_cm-is-not-defined.patch
-fujitsu-application-panel-driver.patch
-apanel-free-input-device-on-close.patch
-apanel-change-name-of-led.patch
-apanel-detach-on-shutdown.patch
-apanel-use-generic-keycode-routines.patch
-fujitsu-application-panel-led-value.patch
-ads7846-stop-updating-dev-powerpower_state.patch
-drivers-ata-libata-ehc-fix-printk-warning.patch
-pata_hpt37x-fix-outstanding-bug-reports-on-the-hpt374-and-37x-cable-detect-checkpatch-fixes.patch
-pata_pcmcia-minor-cleanups-and-support-for-dual-channel-cards.patch
-ata-ahci-enclosure-management-via-led.patch
-pata_legacy-restructure-and-revamp.patch
-ide-mm-ide-scsi-add-ide_scsi_hex_dump-helper.patch
-ide-mm-ide-add-missing-checks-for-control-register-existence.patch
-ide-mm-ide-deprecate-config_blk_dev_offboard.patch
-ide-mm-ide-fix-ide_scan_pcibus-error-message.patch
-ide-mm-ide-coding-style-fixes-for-drivers-ide-setup-pci-c.patch
-ide-mm-ide-add-sys-bus-ide-devices-model-firmware-serial-sysfs-entries.patch
-ide-mm-ide-dma-reporting-and-validity-checking-fixes-take-3.patch
-ide-mm-ide-cd-remove-dead-post_transform_command.patch
-ide-mm-pdc202xx_new-fix-promise-tx4-support.patch
-ide-mm-hpt366-fix-hpt37x-pio-mode-timings-take-2.patch
-ide-mm-ide-remove-dead-code-from-__ide_dma_test_irq.patch
-ide-mm-ide-remove-stale-changelog-from-ide-disk-c.patch
-ide-mm-ide-remove-stale-changelog-from-ide-probe-c.patch
-md-balance-braces-in-raid5-debug-code.patch
-mips-fix-makefile-borkage.patch
-mips-remove-dead-config-symbols-from-mips-code.patch
-ipsec-fix-reversed-icmp6-policy-check.patch
-ipsec-do-not-let-packets-pass-when-icmp-flag-is-off.patch
-git-net-fix-drivers-net-ns83820c-build.patch
-updates-to-nfsroot-documentation-take-3.patch
-net-use-mutex_is_locked-for-assert_rtnl.patch
-tipc-fix-semaphore-handling.patch
-ppp-synchronous-tty-convert-dead_sem-to-completion.patch
-ucc_geth-fix-build-break-introduced-by-commit-09f75cd7bf13720738e6a196cc0107ce9a5bd5a0-checkpatch-fixes.patch
-pcmcia-net-use-roundup_pow_of_two-macro-instead-of-grotesque-loop.patch
-net-ibm_newemac-remove-spin_lock_unlocked.patch
-e100-free-irq-to-remove-warning-when-rebooting.patch
-net-smc911x-shut-up-compiler-warnings.patch
-bnx2x-depends-on-zlib_inflate.patch
-plip-driver-convert-killed_timer_sem-to-completion.patch
-pcie-fix-double-initialization-bug.patch
-pci-dont-load-acpi_php-when-acpi-is-disabled.patch
-pci-dont-load-acpi_php-when-acpi-is-disabled-fix.patch
-track-accurate-idle-time-with-tick_schedidle_sleeptime.patch
-merge-multiple-error-paths-in-alloc_uid-into-one.patch
-kernel-time-make-tick_do_broadcast-static.patch
-git-scsi-misc-fix-build-in-drivers-scsi-scsi_tgt_libc.patch
-initio-fix-conflict-when-loading-driver.patch
-ips-remove-ips_ha-members-that-duplicate-struct-pci_dev-members.patch
-ips-trim-trailing-whitespace.patch
-ips-pci-api-cleanups.patch
-ips-handle-scsi_add_host-failure-and-other-err-cleanups.patch
-scsi-gdth-kill-unneeded-irq-argument.patch
-scsi-sym53c416-kill-pointless-irq-handler-loop-and-test.patch
-scsi-ncr5380-minor-irq-handler-cleanups.patch
-advansys-fix-section-mismatch-warning.patch
-aic94-fix-section-mismatches.patch
-sym2-fix-section-mismatch-warning.patch
-aacraid-driver-fails-with-dell-poweredge-expandable-raid-controller-3-di.patch
-drivers-scsi-sgiwd93c-export-sgiwd93_reset.patch
-hptiop-add-more-adapter-models-and-other-fixes.patch
-hptiop-add-more-adapter-models-and-other-fixes-update.patch
-hptiop-add-more-adapter-models-and-other-fixes-fix-2.patch
-drivers-scsi-iprc-use-list_head-instead-of-list_head_init.patch
-libsas-convert-ata-bridge-to-use-new-eh-checkpatch-fixes.patch
-belkin_sa-clean-up-for-new-style-termios-and-speed.patch
-keyspan_pda-clean-up-speed-handling.patch
-mct232-speed-new-termios-and-compliance-cleanups.patch
-mct232-speed-new-termios-and-compliance-cleanups-fix.patch
-ohci-hcdcohci_irq-locking-fix.patch
-edgeport-usb-serial-converter-convert-es_sem-to-mutex.patch
-usb-testing-driver-convert-dev-sem-to-mutex.patch
-usb-testing-driver-dont-free-a-locked-mutex.patch
-usb-mon-nopage.patch
-txx9-watchdog-driver.patch
-net-mac80211-fix-inappropriate-memory-freeing.patch
-wireless-libertas-dont-cast-a-pointer-to-pointer-of-list_head.patch
-git-x86-__vdso_getcpu-warning-fix.patch
-git-x86-fix-allnoconfig-build.patch
-uml-add-asm-um-asmh.patch
-x86_64-add-acpi-reboot-option.patch
-clocksource-make-clocksource_mask-bullet-proof.patch
-time-fold-__get_realtime_clock_ts-into-getnstimeofday.patch
-mcheck-mce_64-mce_read_sem-to-mutex.patch
-x86_64-efi-runtime-service-support-efi-basic-runtime-service-support.patch
-x86_64-efi-runtime-service-support-efi-basic-runtime-service-support-fixes.patch
-x86_64-efi-runtime-service-support-efi-basic-runtime-service-support-calling-convention-fix.patch
-x86_64-efi-runtime-service-support-efi-runtime-services.patch
-x86_64-efi-runtime-service-support-document-for-efi-runtime-services.patch
-x86_64-efi-runtime-service-support-remove-duplicated-code-from-efi_32c.patch
-x86-boot-use-e820-memory-map-on-efi-32-platform.patch
-ieee80211_rate-missed-unlock.patch
-drivers-cpufreq-cpufreq_statsc-section-fix.patch
 bonding-locking-fix.patch
-bridge-assign-random-address.patch
-nfs-fix-an-oops-in-nfs-unmount.patch
-acpi-sbs-reset-alarm-bit.patch
-acpi-sbs-ignore-alarms-coming-from-unknown-devices.patch
-acpi-sbs-return-rate-in-mw-if-capacity-in-mwh.patch
-usb-use-irqf_disabled-for-hcd-interrupt-handlers.patch
-usb-at91_udc-correct-hanging-while-disconnecting-usb-cable.patch
-iwlwifi3945-4965-fix-rate-control-algo-reference-leak.patch
-iwlwifi3945-4965-fix-rate-control-algo-reference-leak-fix.patch
-mm-sparsec-check-the-return-value-of-sparse_index_alloc.patch
-mm-sparsec-improve-the-error-handling-for-sparse_add_one_section.patch
-mm-sparsec-improve-the-error-handling-for-sparse_add_one_section-fix.patch
-pktcdvd-add-kobject_put-when-kobject-register-fails.patch
-libertas-select-wireless_ext.patch
-bcm43xx_debugfs-sscanf-fix.patch
-apm_eventinfo_t-are-userspace-types.patch
-drivers-macintosh-via-pmuc-added-a-missing-iounmap.patch
-tmpfs-fix-mounts-when-size-is-less-than-the-page-size.patch
-shmem-factor-out-sbi-free_inodes-manipulations.patch
-shmem-factor-out-sbi-free_inodes-manipulations-fix.patch
-i-oat-fixups-from-code-comments.patch
-rcu-move-three-variables-to-__read_mostly-to-save-space.patch
-ext4-fix-mb_debug-format-warnings.patch
-jbd2-remove-printk-from-j_assert-macros.patch
-64-bit-i_version-afs-fixes.patch
-ext4-fix-freespace-accounting-with-mballoc-on-32bit-machines.patch
-ext4-fix-oops-with-jbd-stats-through-procfs-and-external.patch
-ext4-superc-fix-ifdefs.patch
-ext4-add-block-bitmap-validation.patch
-ext4-fix-up-ext4fs_debug-builds.patch
-jbd2-fix-assertion-failure-in-fs-jbd2-checkpointc.patch
-ext4-check-for-the-correct-error-return-from-ext4_ext_get_blocks.patch
-ext4-check-for-the-correct-error-return-from-ext4_ext_get_blocks-fix.patch
-drivers-dma-iop-admac-use-list_head-instead-of-list_head_init.patch

 Merged into mainline or a subsystem tree

+quicklists-do-not-release-off-node-pages-early.patch
+ecryptfs-fix-string-overflow-on-long-cipher-names.patch
+fix-computation-of-skb-size-for-quota-messages.patch
+dont-send-quota-messages-repeatedly-when-hardlimit-reached.patch
+ecryptfs-fix-unlocking-in-error-paths.patch
+ecryptfs-redo-dgetmntget-on-dentry_open-failure.patch
+maintainers-mailing-list-archives-are-web-links.patch
+ps3-vuart-fix-error-path-locking.patch
+lib-proportion-fix-underflow-in-prop_norm_percpu.patch
+pcmcia-remove-pxa2xx_lubbock-build-warning.patch
+kconfig-obey-kconfig_allconfig-choices-with-randconfig.patch

 2.6.24 queue

+fix-crash-with-flat_memory-and-arch_pfn_offset-=-0.patch
+hfs-handle-more-on-disk-corruptions-without-oopsing.patch
+hfs-handle-more-on-disk-corruptions-without-oopsing-fix.patch
+tty-fix-logic-change-introduced-by-wait_event_interruptible_timeout.patch

 Maybe 2.6.24 queue

+timerfd-v3-new-timerfd-api-make-hrtimer_forward-to-return-a-u64.patch
+timerfd-v3-new-timerfd-api-make-the-returned-time-to-be-the-remaining-time-till-the-next-expiration.patch
+timerfd-v3-new-timerfd-api-make-the-returned-time-to-be-the-remaining-time-till-the-next-expiration-checkpatch-fixes.patch

 update timerfd patches

+git-alsa-fixup.patch
+sound-usb-usbaudioc-fix-build-with-config_pm=n.patch

 Fix git-alsa

+git-agpgart-intel-agp-dont-zero-an-already-registered-resource-during-resume.patch

 Fix crash in git-agpgart.patch

-arm-remove-dead-config-symbols-from-arm-code.patch

 Dropped

+agk-dm-dm-snapshot-use-uninitialized_var.patch
+agk-dm-dm-raid1-handle-write-failures.patch
+agk-dm-dm-raid1-report-fault-status.patch
+agk-dm-dm-raid1-fix-eio-after-log-failure.patch
+agk-dm-dm-raid1-handle-read-failures.patch
+agk-dm-dm-raid1-mark-and-clear-nosync-writes.patch

 device-mapper tree updates

+powerpc-add-fixed-phy-support-for-fs_enet.patch

 pwerpc net driver fix

+gregkh-driver-kref-add-kref_set.patch
+gregkh-driver-kobject-convert-sys-firmware-acpi-to-use-kobject_create.patch
+gregkh-driver-kobject-change-net-bridge-to-use-kobject_create_and_add.patch
+gregkh-driver-kobject-change-gfs2-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-infiniband-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-firmware-eddc-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-firmware-efivarsc-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-cpufreq-cpufreqc-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-edac-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-cpuidle-sysfsc-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-pci-hotplug-pci_hotplug_corec-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-base-sysc-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-arch-x86-kernel-cpu-intel_cacheinfoc-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-acpi-systemc-to-use-kobject_create_and_add.patch
+gregkh-driver-kobject-change-drivers-block-pktcdvdc-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-arch-sh-kernel-cpu-sh4-sqc-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-net-ibmvethc-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-parisc-pdc_stablec-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-arch-ia64-kernel-topologyc-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-drivers-md-mdc-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-change-arch-x86-kernel-cpu-mcheck-mce_amd_64c-to-use-kobject_create_and_add.patch
+gregkh-driver-kobject-change-arch-x86-kernel-cpu-mcheck-mce_amd_64c-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-the-cris-iop_fw_loadc-code-is-broken.patch
+gregkh-driver-kobject-convert-drivers-base-classc-to-use-kobject_init-add_ng.patch
+gregkh-driver-kobject-convert-drivers-base-corec-to-use-kobject_init-add_ng.patch
+gregkh-driver-kobject-convert-drivers-net-iseries_vethc-to-use-kobject_init-add_ng.patch
+gregkh-driver-kobject-convert-fs-char_devc-to-use-kobject_init-add_ng.patch
+gregkh-driver-kobject-convert-kernel-paramsc-to-use-kobject_init-add_ng.patch
+gregkh-driver-kobject-convert-kernel-userc-to-use-kobject_init-add_ng.patch
+gregkh-driver-kobject-convert-mm-slubc-to-use-kobject_init-add_ng.patch
+gregkh-driver-kobject-convert-net-bridge-br_ifc-to-use-kobject_init-add_ng.patch
+gregkh-driver-driver-add-driver_add_kobj-for-looney-iseries_veth-driver.patch
+gregkh-driver-kobject-change-drivers-base-bus-to-use-kobject_init_and_add.patch
+gregkh-driver-kobject-convert-block-elevatorc-to-use-kobject_init-add_ng.patch
+gregkh-driver-kobject-convert-block-ll_rw_blkc-to-use-kobject_init-add_ng.patch
+gregkh-driver-kobject-convert-drivers-md-mdc-to-use-kobject_init-add_ng.patch
+gregkh-driver-kobject-convert-kernel-modulec-to-use-kobject_init-add_ng.patch
+gregkh-driver-kobject-remove-kobject_add-as-no-one-uses-it-anymore.patch
+gregkh-driver-kobject-rename-kobject_add_ng-to-kobject_add.patch
+gregkh-driver-kobject-remove-kobject_init-as-no-one-uses-it-anymore.patch
+gregkh-driver-kobject-rename-kobject_init_ng-to-kobject_init.patch
+gregkh-driver-kobject-remove-kobject_register.patch
+gregkh-driver-kset-remove-kset_add-function.patch
+gregkh-driver-kobject-auto-cleanup-on-final-unref.patch
+gregkh-driver-kobject-convert-arch-from-kobject_unregister-to-kobject_put.patch
+gregkh-driver-kobject-convert-drivers-from-kobject_unregister-to-kobject_put.patch
+gregkh-driver-kobject-convert-fs-from-kobject_unregister-to-kobject_put.patch
+gregkh-driver-kobject-convert-remaining-kobject_unregister-to-kobject_put.patch
+gregkh-driver-kobject-remove-kobject_unregister-as-no-one-uses-it-anymore.patch
+gregkh-driver-driver-core-change-sysdev-classes-to-use-dynamic-kobject-names.patch
+gregkh-driver-kobject-remove-old-outdated-documentation.patch
+gregkh-driver-kobject-update-the-kobject-kset-documentation.patch
+gregkh-driver-kobject-add-sample-code-for-how-to-use-kobjects-in-a-simple-manner.patch
+gregkh-driver-kobject-add-sample-code-for-how-to-use-ksets-ktypes-kobjects.patch
+gregkh-driver-driver-core-use-list_head-instead-of-call-to-init_list_head-in-__init.patch

 driver tree updates

+revert-gregkh-driver-pm-acquire-device-locks-prior-to-suspending.patch
+drivers-pcmcia-i82092c-fix-up-after-pci_bus_region-changes.patch

 Fix it

+driver-base-memory-semaphore-to-mutex.patch

 mutex conversion

-git-drm-oops-fix.patch

 Now unneeded

+jdelvare-i2c-i2c-omap-fix-reset-on-error.patch
+jdelvare-i2c-i2c-spelling-fixes.patch
+jdelvare-i2c-i2c-tps65010-move-header.patch
+jdelvare-i2c-i2c-i801-01-document-features.patch
+jdelvare-i2c-i2c-i801-02-features-as-a-bitfield.patch
+jdelvare-i2c-i2c-i801-03-clear-block-buffer-mode.patch
+jdelvare-i2c-i2c-i801-04-add-support-for-i2c-block-read.patch
+jdelvare-i2c-i2c-id-document-optional.patch
+jdelvare-i2c-i2c-id-delete-unused.patch

 I2C tree updates

+ia64-remove-dead-code.patch
+ia64-honor-notify_die-returning-notify_stop.patch

 ia64 updates

+git-infiniband-versus-driver-tree.patch

+input-handle-ev_pwr-in-input_set_capability.patch

 Input fix

+kvm-ist-kaput.patch

 Disable KVM due to large clashes with git-x86

+git-lblnet-fixup.patch

 Fix rejects in git-lblnet.patch

+git-libata-all-fix-pata_winbond-borkage.patch
+git-libata-all-wtf.patch

 Fix git-libata-all.

-libata-xfer_mask-is-unsigned-int-not-unsigned-long-fix.patch

 Fiolded into libata-xfer_mask-is-unsigned-int-not-unsigned-long.patch

+ide-mm-ide-spelling-fixes.patch
+ide-mm-hpt366-merge-set_dma_mode-methods.patch
+ide-mm-ide-fix-build-break-caused-by-ide-remove-ideprobe_init.patch
+ide-mm-ide-fix-io_32bit-race-in-ide_taskfile_ioctl.patch
+ide-mm-ide-clear-hob-bit-for-req_type_ata_cmd-requests-in-ide_end_drive_cmd.patch
+ide-mm-ide-fix-final-status-check-in-task_in_intr.patch
+ide-mm-ide-tape-fix-handling-of-non-special-requests-in-end_request-method.patch
+ide-mm-ide-set-ide_tflag_in-flags-before-queuing-executing-command.patch
+ide-mm-ide-remove-needless-cursg-clearing-from-task_end_request.patch
+ide-mm-ide-use-rq-nr_sectors-in-task_end_request.patch
+ide-mm-ide-task_end_request-fix.patch
+ide-mm-ide-kill-data_ready-define.patch
+ide-mm-ide-use-wait_drive_not_busy-in-drive_cmd_intr-take-2.patch
+ide-mm-ide-initialize-rq-cmd_type-in-ide_init_drive_cmd-callers.patch
+ide-mm-ide-convert-empty-req_type_ata_cmd-requests-to-use-req_type_ata_taskfile.patch
+ide-mm-ide-dont-enable-local-irqs-for-pio-in-in-driver_cmd_intr-take-2.patch
+ide-mm-ide-check-busy-and-error-status-bits-before-reading-data-in-drive_cmd_intr.patch
+ide-mm-ide-fix-final-status-check-in-drive_cmd_intr.patch
+ide-mm-ide-switch-set_xfer_rate-to-use-req_type_ata_taskfile-requests.patch
+ide-mm-ide-switch-ide_cmd_ioctl-to-use-req_type_ata_taskfile-requests.patch
+ide-mm-ide-remove-req_type_ata_cmd.patch
+ide-mm-ide-cd-fix-samsung-cd-rom-scr-3231-quirk.patch
+ide-mm-ide-cd-fix-acer-aopen-24x-cdrom-speed-reporting-on-big-endian-machines.patch
+ide-mm-ide-cd-use-ide_cd_release-in-ide_cd_probe.patch
+ide-mm-ide-cd-fix-error-messages-in-cdrom_read-write_check_ireason.patch
+ide-mm-ide-cd-add-missing-ireason-masking-to-cdrom_write_intr.patch
+ide-mm-ide-cd-fix-error-messages-in-cdrom_write_intr.patch
+ide-mm-ide-cd-add-error-message-for-dma-error-to-cdrom_read_intr.patch
+ide-mm-ide-cd-fix-error-message-in-cdrom_pc_intr.patch
+ide-mm-ide-cd-fix-ireason-reporting-in-cdrom_pc_intr.patch
+ide-mm-ide-cd-use-xfer_func_t-in-cdrom_pc_intr.patch
+ide-mm-ide-cd-add-ide_cd_pad_transfer-helper.patch
+ide-mm-ide-cd-fix-missing-data-handling-in-cdrom_pc_intr.patch
+ide-mm-ide-cd-fix-dma-error-handling-in-cdrom_newpc_intr.patch
+ide-mm-ide-cd-fix-trailing-whitespaces-in-changelog.patch
+ide-mm-ide-cd-move-historical-changelog-to-documentation-ide-changelog-ide-cd-1994-2004.patch
+ide-mm-ide-cd-remove-stale-cdrom_transfer_packet_command-comment.patch
+ide-mm-ide-cd-remove-unused-defines-from-ide-cd-h.patch
+ide-mm-ide-cd-remove-dead-code-from-cdrom_pc_intr.patch
+ide-mm-ide-cd-remove-unused-struct-atapi_cdrom_subchnl.patch
+ide-mm-ide-cd-remove-needless-zeroing-of-info-fields-from-ide_cdrom_setup.patch
+ide-mm-ide-cd-remove-unused-and-write-only-struct-ide_cd_config_flags-fields.patch
+ide-mm-ide-cd-remove-struct-atapi_mechstat_header-changer_info-slot.patch
+ide-mm-ide-cd-cleanup-ide_cdrom_update_speed.patch
+ide-mm-ide-cd-add-ide_cd_capabilities-define.patch
+ide-mm-ide-cd-remove-redundant-config-flags.patch
+ide-mm-ide-cd-kill-cdrom_config_flags-macro.patch
+ide-mm-ide-cd-kill-cdrom_state_flags-macro.patch
+ide-mm-ide-cd-remove-struct-atapi_capabilities_page.patch
+ide-mm-ide-cd-remove-struct-ide_cd_config-state_flags.patch
+ide-mm-ide-cd-remove-no_door_locking-define.patch
+ide-mm-ide-cd-remove-standard_atapi-define.patch
+ide-mm-ide-cd-use-bcd2bin-bin2bcd-macros-from-linux-bcd-h.patch
+ide-mm-ide-cd-re-organize-handling-of-quirky-devices.patch
+ide-mm-ide-cd-remove-duplicate-sense-keys-definitions-from-ide-cd-h.patch
+ide-mm-ide-cd-coding-style-fixes-for-verbose_ide_cd_errors-code.patch
+ide-mm-ide-cd-move-verbose_ide_cd_errors-code-to-ide-cd_verbose-c.patch
+ide-mm-ide-cd-factor-out-ioctl-handlers-from-ide_cdrom_audio_ioctl.patch
+ide-mm-ide-cd-merge-cdrom_play_audio-into-ide_cd_fake_play_trkind.patch
+ide-mm-ide-cd-merge-cdrom_read_subchannel-into-ide_cdrom_get_mcn.patch
+ide-mm-ide-cd-merge-cdrom_select_speed-into-ide_cdrom_select_speed.patch
+ide-mm-ide-cd-move-lba_to_msf-and-msf_to_lba-to-linux-cdrom-h.patch
+ide-mm-ide-cd-coding-style-fixes-for-cdrom_get_toc_entry.patch
+ide-mm-ide-cd-rename-cdrom_-functions-to-ide_cd_.patch
+ide-mm-ide-cd-move-code-handling-cdrom-c-ioctls-to-ide-cd_ioctl-c.patch
+ide-mm-ide-cd-remove-bug_on-from-cdrom_newpc_intr.patch
+ide-mm-ide-cd-call-blk_dump_rq_flags-on-missing-data-in-cdrom_newpc_intr.patch
+ide-mm-ide-cd-factor-out-request-sense-fixup-from-cdrom_pc_intr.patch
+ide-mm-ide-cd-unify-request-end-exit-path-in-cdrom_pc_intr.patch
+ide-mm-ide-cd-merge-cdrom_pc_intr-and-cdrom_newpc_intr.patch
+ide-mm-ide-cd-remove-cdrom_do_pc_continuation.patch
+ide-mm-ide-cd-merge-cdrom_do_packet_command-and-cdrom_do_block_pc.patch
+ide-mm-ide-cd-add-ide_cd_drain_data-helper.patch
+ide-mm-ide-cd-factor-out-transfer-size-checking-from-cdrom_read_intr.patch
+ide-mm-ide-cd-merge-cdrom_read_intr-and-cdrom_write_intr.patch
+ide-mm-ide-cd-merge-cdrom_start_read_continuation-and-cdrom_start_write_cont.patch
+ide-mm-ide-cd-merge-cdrom_start_read-and-cdrom_start_write.patch
+ide-mm-ide-cd-unify-moving-to-the-next-buffer-in-cdrom_rw_intr.patch
+ide-mm-ide-cd-prepare-cdrom_rw_intr-and-cdrom_newpc_intr-to-be-merged.patch
+ide-mm-ide-cd-call-blk_dump_rq_flags-on-missing-data-in-cdrom_rw_intr.patch
+ide-mm-ide-cd-merge-cdrom_rw_intr-and-cdrom_newpc_intr.patch
+ide-mm-ide-cd-merge-cdrom_write_check_ireason-and-cdrom_read_check_ireason.patch
+ide-mm-ide-cd-unify-request-end-exit-path-in-cdrom_decode_status.patch
+ide-mm-ide-cd-update-driver-version-comments-and-copyrights.patch

 IDE tree updates

+git-net-fixup.patch

 Fix rejects in git-net.patch

+git-net-vs-git-lblnet-2.patch

 Fix disagreement between git-lblnet and git-net.

+git-net-vs-git-netdev-all.patch

 Fix disagreement between git-netdev-all and git-net.

-backlight-omap1-backlight-driver-fix.patch

 Fix backlight-omap1-backlight-driver.patch

+pcmcia-3c574_cs-fix-dubious-bitfield-warning.patch
+pcmcia-3c574_cs-fix-shadow-variable-warning.patch
+pcmcia-axnet_cs-make-functions-static.patch
+pcmcia-axnet_cs-make-use-of-max-instead-of-handcrafted-one.patch
+pcmcia-fmvj18x_cs-fix-shadow-variable-warning.patch
+pcmcia-pcnet_cs-fix-shadow-variable-warning.patch

 pcmcia fixes

+serial-add-addi-data-gmbh-communication-cardsin8250_pcic-and-pci_idsh.patch
+serial-add-addi-data-gmbh-communication-cardsin8250_pcic-and-pci_idsh-checkpatch-fixes.patch

 Serial device support

+gregkh-pci-pcie-fix-pcie-hotplug-so-that-it-works-with-expresscard-slots-on-dell-notebooks-in-conjunction-with-modparam-of-pciehp_force-1.patch
+gregkh-pci-pci-more-fixes-for-pcie-hotplug-so-that-it-works-with-expresscard-slots-on-dell-notebooks-in-conjunction-with-modparam-of-pciehp_force-1.patch
+gregkh-pci-pcie-make-use-of-the-previously-split-out-pcie_init_enable_events-function.patch
+gregkh-pci-pcie-fix-double-initialization-bug.patch
+gregkh-pci-pci-hotplug-acpiphp-fix-trivial-typos.patch
+gregkh-pci-pci-hotplug-acpiphp-remove-unneeded-acpi_get_name-function-call.patch
+gregkh-pci-pci-hotplug-pciehp-remove-needless-members-from-struct-controller.patch
+gregkh-pci-pci-hotplug-pciehp-remove-needless-hp_slot-calculation.patch
+gregkh-pci-pci-hotplug-pciehp-use-generic-function-to-find-ext-capability.patch
+gregkh-pci-pci-hotplug-pciehp-fix-some-whitespace-damage.patch
+gregkh-pci-pci-fix-bus-resource-assignment-on-32-bits-with-64b-resources.patch
+gregkh-pci-pci-fix-warning-in-setup-resc-on-32-bit-platforms-with-64-bit-resources.patch
+gregkh-pci-pci-remove-default-pci-expansion-rom-memory-allocation.patch
+gregkh-pci-pci-quirk-enable-msi-mapping-on-ht1000.patch
+gregkh-pci-pci-drivers-pci-msic-move-arch-hooks-to-the-top.patch
+gregkh-pci-pci-kconfig-help-don-t-refer-to-the-pci-howto.patch
+gregkh-pci-pci-spelling-fixes.patch
+gregkh-pci-pci-fix-for-quirk_e100_interrupt.patch
+gregkh-pci-pci-print-quirk-name-in-debug-messages.patch
+gregkh-pci-pci-use-dev_printk-in-quirk-messages.patch
+gregkh-pci-pci-use-dev_printk-in-x86-quirk-messages.patch
+gregkh-pci-pci-fix-typo-in-pci_save_pcix_state.patch
+gregkh-pci-pci-correctly-initialize-a-structure-for-pcie_save_pcix_state.patch
+gregkh-pci-pci-avoid-save-the-same-type-of-cap-multiple-times.patch
+gregkh-pci-pci-add-pci_enable_device_-io-mem-intefaces.patch
+gregkh-pci-pci-remove-users-of-pci_enable_device_bars.patch
+gregkh-pci-pci-remove-pci_enable_device_bars.patch

 PCI tree updates

-quirk-enable-msi-mapping-on-ht1000.patch
-quirk-enable-msi-mapping-on-ht1000-v2.patch


 Dropped

+if-0-pci_cleanup_aer_correct_error_status.patch
+cleanup-gregkh-pci-pci-fix-bus-resource-assignment-on-32-bits-with-64b-resources.patch

 PCI cleanups

-pci-hotplug-mm-pci-hotplug-pciehp-deal-with-pre-inserted-expresscards.patch
-pci-hotplug-mm-pci-hotplug-pciehp-split-out-hardware-init-from-pcie_init.patch
-pci-hotplug-mm-pci-hotplug-pciehp-reinit-hotplug-h-w-on-resume-from-suspend.patch

 Not sure what happened to these - they don't apply by a mile and don't seem
 to have been merged.

+git-sched-fixup.patch
+git-sched-fix-preempt-rcu-on-non-preemptible-architectures.patch

 Repair git-sched.patch

+scsi-megaraidc-__devexit-annotation.patch
+scsi-aic94xx-cleanups.patch
+scsi-aic94xx-cleanups-checkpatch-fixes.patch
+scsi-aic94xx-cleanups-checkpatch-fixes-checkpatch-fixes.patch
+small-cleanups-for-scsi_hosth.patch

 scsi stuff

+scsi-scsi_data_buffer.patch
+scsi-pending-arm-convert-to-accessors.patch
+scsi-bidi-support.patch

 More scsi stuff

+gregkh-usb-usb-unbreak-fsl_usb2_udc.patch
+gregkh-usb-usb-vid-pid-update-for-sierra.patch
+gregkh-usb-usb-new-device-id-for-the-cp2101-driver.patch
+gregkh-usb-usb-convert-ohci-debug-files-to-use-debugfs-instead-of-sysfs.patch
+gregkh-usb-usb-convert-ehci-debug-files-to-use-debugfs-instead-of-sysfs.patch
+gregkh-usb-usb-remove-ohci-useless-masking-unmasking-of-wdh-interrupt.patch
+gregkh-usb-usb-repair-usbdevfs_connect-ioctl.patch
+gregkh-usb-usb-updates-to-usb_reset_composite_device.patch
+gregkh-usb-usb-edgeport-usb-serial-converter-convert-es_sem-to-mutex.patch
+gregkh-usb-usb-add-usbfs-stubs-for-suspend-and-resume.patch
+gregkh-usb-usb-ehci-add-separate-iaa-watchdog-timer.patch
+gregkh-usb-usb-dummy_hcd-change-the-default-power-budget.patch
+gregkh-usb-usb-pl2303-cleanup-fish-and-soup-macros-in-pl2303-driver.patch
+gregkh-usb-usb-pl2303-move-pl2303-vendor-specific-init-to-probe-function.patch
+gregkh-usb-usb-pl2303-add-autosuspend-support-to-pl2303-usb-serial-converter.patch
+gregkh-usb-usb-update-pxa27x-ohci-driver-to-use-clk-support.patch
+gregkh-usb-usb-belkin_sa-clean-up-for-new-style-termios-and-speed-handling-plus-style.patch
+gregkh-usb-usb-keyspan_pda-clean-up-speed-handling.patch
+gregkh-usb-usb-mct232-speed-new-termios-and-compliance-cleanups.patch
+gregkh-usb-usb-mon-nopage.patch
+gregkh-usb-usb-testing-driver-convert-dev-sem-to-mutex.patch
+gregkh-usb-usb-testing-driver-don-t-free-a-locked-mutex.patch
+gregkh-usb-usb-gadget-pxa2xx_udc-supports-inverted-vbus.patch
+gregkh-usb-usb-spelling-fixes.patch
+gregkh-usb-usb-ps3-fix-ehci-iso-transfer-bug.patch
+gregkh-usb-usb-usb-storage-initializersc-fix-signedness-difference.patch
+gregkh-usb-usb-usbdevfs_urb-__user-annotation.patch
+gregkh-usb-usb-ehci-hcd-fix-sparse-warning-about-shadowing-status-symbol.patch
+gregkh-usb-usb-add-marvell-orion-usb-host-support.patch
+gregkh-usb-usb-ehci-potential-oops-fix-on-arc-tdi-cores.patch
+gregkh-usb-usb-gadget-ethernet-error-path-potential-oops-fix.patch
+gregkh-usb-usb-fix-null-pointer-dereference-on-drivers-usb-serial-whiteheatc.patch
+gregkh-usb-usb-gadget-at91_udc-minor-fix.patch
+gregkh-usb-usb-fix-hcd-kconfig-goofage.patch
+gregkh-usb-usb-tosa_udc_use_gpio_vbuspatch.patch

 USB tree updates

+ehci-hcd-fix-sparse-warning-about-shadowing-status-symbol-checkpatch-fixes.patch
+usb-microtek-remove-unused-semaphore.patch
+usb-libusual-locking-cleanup.patch

 USB things

+git-watchdog-fixup.patch

 Fix rejects in git-watchdog

-add-support-for-sb1-hardware-watchdog-fix.patch

 Folded into add-support-for-sb1-hardware-watchdog.patch

+prism54-remove-questionable-down_interruptible-usage.patch

 wireless fix

+git-x86-fixup.patch
+git-x86-arch-x86-math-emu-errorsc-fix-printk-warnings.patch
+git-x86-drivers-pnp-pnpbios-bioscallsc-build-fix.patch
+git-x86-fix-doubly-merged-patch.patch
+git-x86-export-leave_mm.patch

 Partially repair git-x86

+pci-dont-load-acpi_php-when-acpi-is-disabled.patch
+arch-x86-kernel-cpu-mcheck-p4c-kernel-2624-rc5.patch
+arch-x86-kernel-cpu-mcheck-p4c-kernel-2624-rc5-checkpatch-fixes.patch
+arch-x86-kernel-cpu-mcheck-p4c-kernel-2624-rc5-checkpatch-fixes-checkpatch-fixes.patch

 x86 stuff

+drm-i915-fix-oops-after-killing-x.patch
+usbtouchscreen-fix-buffer-overflow-make-more-egalax-work.patch
+usbtouchscreen-fix-buffer-overflow-make-more-egalax-work-checkpatch-fixes.patch
+fix-rtc_aie-with-config_hpet_emulate_rtc.patch
+cpufreq-initialise-default-governor-before-use.patch

 Probably for 2.6.24, via subsystem trees

-slub-optimise-the-clearing-of-__gfp_zero.patch

 Unneeded

+shmem-factor-out-sbi-free_inodes-manipulations.patch
+shmem-factor-out-sbi-free_inodes-manipulations-fix.patch
+tmpfs-fix-mounts-when-size-is-less-than-the-page-size.patch
+tmpfs-move-swap_state-stats-update.patch
+tmpfs-shuffle-add_to_swap_caches.patch
+tmpfs-move-swap-swizzling-into-shmem.patch
+tmpfs-allow-filepage-alongside-swappage.patch
+tmpfs-allocate-on-read-when-stacked.patch
+tmpfs-make-shmem_unuse-more-preemptible.patch
+tmpfs-open-a-window-in-shmem_unuse_inode.patch
+tmpfs-radix_tree_preloading.patch
+tmpfs-fix-shmem_swaplist-races.patch

 MM things

+maps4-add-proc-kpagecount-interface-fix.patch
+maps4-add-proc-kpageflags-interface-fix.patch
+maps4-add-proc-kpageflags-interface-fix-2.patch
+maps4-add-proc-kpageflags-interface-fix-2-fix.patch

 maps4 fixes

+page-allocator-clean-up-pcp-draining-functions-swsusp-fix.patch
+page-allocator-clean-up-pcp-draining-functions-swsusp-fix-fix.patch

 Fix page-allocator-clean-up-pcp-draining-functions.patch

+mm-remove-fastcall-from-mm.patch
+mm-remove-fastcall-from-mm-checkpatch-fixes.patch
+set_page_refcounted-vm_bug_on-fix.patch
+fix-dirty-page-accounting-leak-with-ext3-data=journal.patch
+oom_kill-remove-uid==0-checks.patch

 More mm things

+m68knommu-remove-duplicate-exports.patch

 m68knommu cleanup

+arch-cris-arch-v10-vmlinuxldss-fix-boot-problem.patch
+cris-remove-unused-__dummy-const_addr-and-addr-from-bitopsh.patch

 cris updates

+uml-header-untangling-fix.patch

 Fix uml-header-untangling.patch

+ik8-add-dell-uk-6400-inspiron-model-mm061.patch
+parport_pc-detection-for-superio-it87xx-post.patch
+lib-extablec-removes-an-expensive-integer-divide-in-search_extable.patch
+kernel-paramsc-remove-sparse-warning-different-signedness.patch
+fix-missing-n-in-checkpatchpl.patch
+xen-fiddle_vdso-must-be-__init.patch
+calibrate_delay-must-be-__cpuinit.patch
+idle_regs-must-be-__cpuinit.patch
+kernel-sysc-get-rid-of-expensive-divides-in-groups_sort.patch
+debug_smp_processor_id-fixlets.patch
+use-ilog2-in-fs-namespacec.patch
+use-ilog2-in-fs-namespacec-fix.patch
+printk_ratelimit-functions-should-use-config_printk.patch
+w1-gpio-add-gpio-w1-bus-master-driver.patch
+docs-convert-kref-semaphore-to-mutex.patch
+fix-ixany-and-restart-after-signal-eg-ctrl-c-in-n_tty-line-discipline.patch
+maintainers-remove-adam-fritzler-update-his-email-address-in-other-sources.patch
+avoid-overflows-in-kernel-timec.patch
+avoid-overflows-in-kernel-timec-fix.patch
+export-iov_shorten-for-ext4s-use.patch
+export-iov_shorten-for-ext4s-use-fix.patch

 Misc

+ser_gigaset-convert-mutex-to-completion.patch

 gigaset cleanup

+ecryptfs-remove-debug-as-mount-option-and-warn-if-set-via-modprobe.patch
+ecryptfs-minor-fixes-to-printk-messages.patch
+ecryptfs-change-the-type-of-cipher_code-from-u16-to-u8.patch
+ecryptfs-load-each-file-decryption-key-only-once.patch

 ecryptfs work

-logo-move-declarations-of-logos-to-linux_logoh.patch
-logo-move-declarations-of-logos-to-linux_logoh-fix.patch

 Dropped these - it was too much work trying to make them work.

+drivers-video-pm3fbc-section-fix.patch
+neofb-avoid-overwriting-fb_info-fields.patch

 fbdev things

+md-support-external-metadata-for-md-arrays.patch
+md-give-userspace-control-over-removing-failed-devices-when-external-metdata-in-use.patch
+md-allow-a-maximum-extent-to-be-set-for-resyncing.patch
+md-allow-devices-to-be-shared-between-md-arrays.patch
+md-lock-address-when-changing-attributes-of-component-devices.patch
+md-allow-an-md-array-to-appear-with-0-drives-if-it-has-external-metadata.patch

 RAID updates

-ext4-mm-ext4_grpnum_t.patch
-ext4-mm-ext4_grpnum_t_int_fix.patch
-ext4-mm-ext4-cleanup.patch
-ext4-mm-ext4-cleanup-2.patch
-ext4-mm-ext4-cleanup-3.patch
-ext4-mm-ext4-cleanup-4.patch
+ext4-mm-ext4_extents_use_ext4_lblk_t_fix.patch
+ext4-mm-ext4_extents_remove_unneeded_casts.patch
+ext4-mm-ext4_grp_t.patch
+ext4-mm-ext4_grp_t_int_fix.patch
+ext4-mm-ext4_add_update_incompat_feature.patch
+ext4-mm-ext4-sparse-warning-fix.patch
+ext4-mm-ext4-rename-i_file_acl-to-i_file_acl_lo.patch
+ext4-mm-ext4-rename-i_dir_acl-to-i_size_high.patch
+ext4-mm-ext4_different_maxbytes_funcs_for_bitmap_and_extent_files.patch
+ext4-mm-ext4_store_maxbytes_for_bitmaped_files.patch
+ext4-mm-ext4_ifdef_fix.patch
+ext4-mm-ext4_fix_oops_on_corrupted_mount.patch
+ext4-mm-change-default-ext4-error.patch
+ext4-mm-ext4_add_block_bitmap_validation.patch
+ext4-mm-ext4-add-block-bitmap-validation-fix.patch
+ext4-mm-jbd2-remove-printk-from-j_assert-macros.patch
+ext4-mm-jbd2-fix-assertion-failure-in-fs-jbd2-checkpointc.patch
+ext4-mm-ext4-check-for-the-correct-error-return-from-ext4_ext_get_blocks.patch
+ext4-mm-ext4-check-for-the-correct-error-return-from-ext4_ext_get_blocks-fix.patch
+ext4-mm-remove-unused-code-from-ext4_find_entry.patch
+ext4-mm-jbd-stats-through-procfs-with-external-journal-oops-fix.patch
+ext4-mm-ext4_jbd2_stats_kmalloc_failure_fix.patch
+ext4-mm-ext4_jbd2_stats_comments_fix.patch
+ext4-mm-ext4_accumulated_jbd2_stats_in_jiffies.patch
+ext4-mm-ext4_open-code-jbd2_stats-union-references.patch
-ext4-mm-64-bit-i_version.patch
-ext4-mm-i_version_hi.patch
-ext4-mm-ext4_i_version_hi_2.patch
-ext4-mm-i_version_update_ext4.patch
+ext4-mm-ext4_journal_chksum_highmem_fix.patch
+ext4-mm-inode-version-vfs.patch
+ext4-mm-inode-version-ext4.patch
+ext4-mm-64-bit-i_version-afs-fixes.patch
-ext4-mm-mballoc-bug-workaround.patch
-ext4-mm-ext4_grpnumt-mballoc-fix.patch
-ext4-mm-mballoc-compilebench-fix.patch
+ext4-mm-ext4-fix-mb_debug-format-warnings.patch
+ext4-mm-ext4_mballoc_freespace_accounting_fix.patch
+ext4-mm-enable-delalloc-and-mballoc.patch
+ext4-mm-show-mballoc-delalloc-option.patch
+ext4-mm-fix-show-options.patch
+ext4-mm-ext4_fix_up_ext4fs_debug_builds.patch

 Changes in the ext4 tree

+ext4-mm-ext4_store_maxbytes_for_bitmaped_files-warning-fix.patch

 ext4 fix

+ext3-remove-unused-code-from-ext3_find_entry.patch

 ext3 cleanup

+memory-controller-memory-accounting-v7-move-page_assign_page_cgroup-to-vm_bug_on-in-free_hot_cold_page.patch
+memory-controller-use-rcu_read_lock-in-mem_cgroup_cache_charge.patch
+memcgroup-tidy-up-mem_cgroup_charge_common.patch
+memcgroup-fix-hang-with-shmem-tmpfs.patch
+memory-controller-remove-control_type-feature.patch

 Memory controller updates

+iget-stop-isofs-from-using-read_inode-fix-2.patch
+iget-stop-isofs-from-using-read_inode-fix-2-update.patch

 Fix iget-stop-isofs-from-using-read_inode.patch

+pid-namespaces-vs-locks-interaction.patch

 namespaces fix

+pid-fix-mips-irix-emulation-pid-usage-fix.patch

 Fix pid-fix-mips-irix-emulation-pid-usage.patch

+aout-move-stack_top-to-asm-processorh-fix.patch

 Fix aout-move-stack_top-to-asm-processorh.patch against git-x86 changes

+fs-remove-fastcall-it-is-always-empty.patch
+fs-remove-fastcall-it-is-always-empty-checkpatch-fixes.patch
+kernel-remove-fastcall-in-kernel.patch
+kernel-remove-fastcall-in-kernel-checkpatch-fixes.patch
+lib-remove-fastcall-from-lib.patch
+lib-remove-fastcall-from-lib-checkpatch-fixes.patch
+remove-fastcall-from-linux-include.patch
+remove-fastcall-from-linux-include-checkpatch-fixes.patch
+asm-generic-remove-fastcall.patch
+misc-removal-of-final-callers-using-fastcall.patch

 Start removal of fastcall

+udf-remove-wrong-prototype-of-udf_readdir.patch
+udf-improve-readability-of-do_udf_readdir.patch
+udf-fix-coding-style-of-dirc.patch
+udf-fix-3-signedness-1-unitialized-variable-warnings.patch
+udf-fix-signedness-issue.patch

 UDF fixlets

+constify-tables-in-kernel-sysctl_checkc.patch
+constify-tables-in-kernel-sysctl_checkc-fix.patch

 Cleanups

+aoe-bring-driver-version-number-to-47.patch
+aoe-handle-multiple-network-paths-to-aoe-device.patch
+aoe-mac_addr-avoid-64-bit-arch-compiler-warnings.patch
+aoe-clean-up-udev-configuration-example.patch
+aoe-eliminate-goto-and-improve-readability.patch
+aoe-user-can-ask-driver-to-forget-previously-detected-devices.patch
+aoe-dynamically-allocate-a-capped-number-of-skbs-when-necessary.patch
+aoe-only-install-new-aoe-device-once.patch
+aoe-add-module-parameter-for-users-who-need-more-outstanding-i-o.patch
+aoe-the-aoeminor-doesnt-need-a-long-format.patch
+aoe-make-error-messages-more-specific.patch
+aoe-update-copyright-date.patch
+aoe-statically-initialise-devlist_lock.patch

 AOE driver update

+use-pgoff_t-instead-of-unsigned-long.patch

 MM cleanup

+ipc-convert-handmade-min-to-min.patch

 IPC cleanup

+reiser4-replace-uid==0-check-with-capability.patch

 reiser4 fix



6223 commits in 1825 patch files

All patches:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/patch-list



^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
@ 2007-12-23 11:04 ` Ingo Molnar
  2007-12-23 11:10   ` 2.6.24-rc6-mm1 Ingo Molnar
  2007-12-23 12:35 ` 2.6.24-rc6-mm1 Rafael J. Wysocki
                   ` (19 subsequent siblings)
  20 siblings, 1 reply; 146+ messages in thread
From: Ingo Molnar @ 2007-12-23 11:04 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel


* Andrew Morton <akpm@linux-foundation.org> wrote:

> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> 
> - This kernel doesn't work on i386!
> 
>   It oopses late in boot due to an unrevertable change (e3c1b141) in 
>   git-x86 which I stared at for a while then I ran out of time and 
>   gave up.

hm, the fix for that is in x86.git already - perhaps you got an older 
copy?

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 11:04 ` 2.6.24-rc6-mm1 Ingo Molnar
@ 2007-12-23 11:10   ` Ingo Molnar
  2007-12-23 11:34     ` 2.6.24-rc6-mm1 Andrew Morton
  0 siblings, 1 reply; 146+ messages in thread
From: Ingo Molnar @ 2007-12-23 11:10 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, Glauber de Oliveira Costa


* Ingo Molnar <mingo@elte.hu> wrote:

> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> > 
> > - This kernel doesn't work on i386!
> > 
> >   It oopses late in boot due to an unrevertable change (e3c1b141) in 
> >   git-x86 which I stared at for a while then I ran out of time and 
> >   gave up.
> 
> hm, the fix for that is in x86.git already - perhaps you got an older 
> copy?

hm, e3c1b141 is already the latest one.

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 11:10   ` 2.6.24-rc6-mm1 Ingo Molnar
@ 2007-12-23 11:34     ` Andrew Morton
  2007-12-23 11:57       ` 2.6.24-rc6-mm1 Ingo Molnar
  0 siblings, 1 reply; 146+ messages in thread
From: Andrew Morton @ 2007-12-23 11:34 UTC (permalink / raw)
  To: Ingo Molnar; +Cc: linux-kernel, Glauber de Oliveira Costa

On Sun, 23 Dec 2007 12:10:04 +0100 Ingo Molnar <mingo@elte.hu> wrote:

> 
> * Ingo Molnar <mingo@elte.hu> wrote:
> 
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> > > 
> > > - This kernel doesn't work on i386!
> > > 
> > >   It oopses late in boot due to an unrevertable change (e3c1b141) in 
> > >   git-x86 which I stared at for a while then I ran out of time and 
> > >   gave up.
> > 
> > hm, the fix for that is in x86.git already - perhaps you got an older 
> > copy?
> 
> hm, e3c1b141 is already the latest one.

"already in", I assume.


You can always tell what I have by looking at the patch:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/broken-out/git-x86.patch

It includes the head commit ID at the first line (it's in a
machine-readable form - Matthias's scripts which prepare the mm git tree
actually get the git-foo.patch info direct from the original repo rather
than by applying the diff from broken-out/)

Still.  The crash is 100% repeatable and is the same every time.  Happens
on both my i386 test boxes.

http://userweb.kernel.org/~akpm/config-sony.txt
http://userweb.kernel.org/~akpm/config-vmm.txt

and I bisected it down to e3c1b141.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 11:34     ` 2.6.24-rc6-mm1 Andrew Morton
@ 2007-12-23 11:57       ` Ingo Molnar
  2007-12-23 12:12         ` 2.6.24-rc6-mm1 Christoph Hellwig
  0 siblings, 1 reply; 146+ messages in thread
From: Ingo Molnar @ 2007-12-23 11:57 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, Glauber de Oliveira Costa


* Andrew Morton <akpm@linux-foundation.org> wrote:

> Still.  The crash is 100% repeatable and is the same every time.  
> Happens on both my i386 test boxes.
> 
> http://userweb.kernel.org/~akpm/config-sony.txt
> http://userweb.kernel.org/~akpm/config-vmm.txt
> 
> and I bisected it down to e3c1b141.

ok, can reproduce it - the patch below fixes it for me.

	Ingo

------------------------->
Subject: x86: fix system gate related crash
From: Ingo Molnar <mingo@elte.hu>

on 32-bit, system gates are traps.

on 64-bit, they are interrupts (which disable hardirqs).

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/asm-x86/desc.h |    4 ++++
 1 file changed, 4 insertions(+)

Index: linux-x86.q/include/asm-x86/desc.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/desc.h
+++ linux-x86.q/include/asm-x86/desc.h
@@ -310,7 +310,11 @@ static inline void set_trap_gate(unsigne
 static inline void set_system_gate(unsigned int n, void *addr)
 {
 	BUG_ON((unsigned)n > 0xFF);
+#ifdef CONFIG_X86_32
+	_set_gate(n, GATE_TRAP, addr, 0x3, 0, __KERNEL_CS);
+#else
 	_set_gate(n, GATE_INTERRUPT, addr, 0x3, 0, __KERNEL_CS);
+#endif
 }
 
 static inline void set_task_gate(unsigned int n, unsigned int gdt_entry)

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 11:57       ` 2.6.24-rc6-mm1 Ingo Molnar
@ 2007-12-23 12:12         ` Christoph Hellwig
  0 siblings, 0 replies; 146+ messages in thread
From: Christoph Hellwig @ 2007-12-23 12:12 UTC (permalink / raw)
  To: Ingo Molnar; +Cc: Andrew Morton, linux-kernel, Glauber de Oliveira Costa

On Sun, Dec 23, 2007 at 12:57:35PM +0100, Ingo Molnar wrote:
> 
> * Andrew Morton <akpm@linux-foundation.org> wrote:
> 
> > Still.  The crash is 100% repeatable and is the same every time.  
> > Happens on both my i386 test boxes.
> > 
> > http://userweb.kernel.org/~akpm/config-sony.txt
> > http://userweb.kernel.org/~akpm/config-vmm.txt
> > 
> > and I bisected it down to e3c1b141.
> 
> ok, can reproduce it - the patch below fixes it for me.
> 
> 	Ingo
> 
> ------------------------->
> Subject: x86: fix system gate related crash
> From: Ingo Molnar <mingo@elte.hu>
> 
> on 32-bit, system gates are traps.
> 
> on 64-bit, they are interrupts (which disable hardirqs).
> 
> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> ---
>  include/asm-x86/desc.h |    4 ++++
>  1 file changed, 4 insertions(+)
> 
> Index: linux-x86.q/include/asm-x86/desc.h
> ===================================================================
> --- linux-x86.q.orig/include/asm-x86/desc.h
> +++ linux-x86.q/include/asm-x86/desc.h
> @@ -310,7 +310,11 @@ static inline void set_trap_gate(unsigne
>  static inline void set_system_gate(unsigned int n, void *addr)
>  {
>  	BUG_ON((unsigned)n > 0xFF);
> +#ifdef CONFIG_X86_32
> +	_set_gate(n, GATE_TRAP, addr, 0x3, 0, __KERNEL_CS);
> +#else
>  	_set_gate(n, GATE_INTERRUPT, addr, 0x3, 0, __KERNEL_CS);
> +#endif
>  }
>
This would be a lot cleaner with entirely separate implementations
of set_system_gate for 32 vs 64 bit.  Especially if the file already
has a large ifdef block for 32 vs 64 already.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
  2007-12-23 11:04 ` 2.6.24-rc6-mm1 Ingo Molnar
@ 2007-12-23 12:35 ` Rafael J. Wysocki
  2007-12-23 13:00   ` 2.6.24-rc6-mm1 Ingo Molnar
  2007-12-23 23:09   ` 2.6.24-rc6-mm1 H. Peter Anvin
  2007-12-23 16:27 ` 2.6.24-rc6-mm1 Torsten Kaiser
                   ` (18 subsequent siblings)
  20 siblings, 2 replies; 146+ messages in thread
From: Rafael J. Wysocki @ 2007-12-23 12:35 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, Ingo Molnar

On Sunday, 23 of December 2007, Andrew Morton wrote:
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> 
> - This kernel doesn't work on i386!
> 
>   It oopses late in boot due to an unrevertable change (e3c1b141) in git-x86
>   which I stared at for a while then I ran out of time and gave up.
> 
>   I would have just abandoned this release until it was fixed but I'll be
>   largely offline for ten days starting tomorrow.
> 
>   The culprits have been notified and hopefully we'll have a patch for
>   hot-fixes/ tomorrow.
> 
>   x86_64 and powerpc work OK though.

Well it doesn't build on x86-64 for me:

  CHK     include/linux/compile.h
  CC      arch/x86/ia32/../../../fs/compat_binfmt_elf.o
Assembler messages:
Fatal error: can't create arch/x86/ia32/../../../fs/.tmp_compat_binfmt_elf.o: No such file or directory
make[2]: *** [arch/x86/ia32/../../../fs/compat_binfmt_elf.o] Error 2

I will post the .config if anyone is interested.

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 12:35 ` 2.6.24-rc6-mm1 Rafael J. Wysocki
@ 2007-12-23 13:00   ` Ingo Molnar
  2007-12-23 13:48     ` 2.6.24-rc6-mm1 Rafael J. Wysocki
  2007-12-23 23:09   ` 2.6.24-rc6-mm1 H. Peter Anvin
  1 sibling, 1 reply; 146+ messages in thread
From: Ingo Molnar @ 2007-12-23 13:00 UTC (permalink / raw)
  To: Rafael J. Wysocki; +Cc: Andrew Morton, linux-kernel


* Rafael J. Wysocki <rjw@sisk.pl> wrote:

> Well it doesn't build on x86-64 for me:
> 
>   CHK     include/linux/compile.h
>   CC      arch/x86/ia32/../../../fs/compat_binfmt_elf.o
> Assembler messages:
> Fatal error: can't create arch/x86/ia32/../../../fs/.tmp_compat_binfmt_elf.o: No such file or directory
> make[2]: *** [arch/x86/ia32/../../../fs/compat_binfmt_elf.o] Error 2
> 
> I will post the .config if anyone is interested.

yes, please send the .config.

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 13:00   ` 2.6.24-rc6-mm1 Ingo Molnar
@ 2007-12-23 13:48     ` Rafael J. Wysocki
  2007-12-23 13:53       ` 2.6.24-rc6-mm1 Rafael J. Wysocki
  0 siblings, 1 reply; 146+ messages in thread
From: Rafael J. Wysocki @ 2007-12-23 13:48 UTC (permalink / raw)
  To: Ingo Molnar; +Cc: Andrew Morton, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 647 bytes --]

On Sunday, 23 of December 2007, Ingo Molnar wrote:
> 
> * Rafael J. Wysocki <rjw@sisk.pl> wrote:
> 
> > Well it doesn't build on x86-64 for me:
> > 
> >   CHK     include/linux/compile.h
> >   CC      arch/x86/ia32/../../../fs/compat_binfmt_elf.o
> > Assembler messages:
> > Fatal error: can't create arch/x86/ia32/../../../fs/.tmp_compat_binfmt_elf.o: No such file or directory
> > make[2]: *** [arch/x86/ia32/../../../fs/compat_binfmt_elf.o] Error 2
> > 
> > I will post the .config if anyone is interested.
> 
> yes, please send the .config.

Attached.

It also may be relevant that I compile the kernel with "make O=../build".

Thanks,
Rafael

[-- Attachment #2: 2.6.24-rc6-mm1-config --]
[-- Type: text/plain, Size: 59514 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6-mm1
# Sun Dec 23 13:30:48 2007
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_ARCH_SUPPORTS_KVM=y
CONFIG_NR_CPUS=128
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_RCU_TRACE=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y

#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
CONFIG_DMAR_GFX_WA=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
CONFIG_TCP_MD5SIG=y
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_RCSIMPLE=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG=y
# CONFIG_MAC80211_HT_DEBUG is not set
# CONFIG_MAC80211_VERBOSE_DEBUG is not set
# CONFIG_MAC80211_LOWTX_FRAME_DUMP is not set
# CONFIG_TKIP_DEBUG is not set
# CONFIG_MAC80211_DEBUG_COUNTERS is not set
CONFIG_MAC80211_IBSS_DEBUG=y
# CONFIG_MAC80211_VERBOSE_PS_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
CONFIG_IEEE80211_SOFTMAC_DEBUG=y
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_MTD_OOPS is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PNC2000 is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
CONFIG_MTD_TS5500=m
# CONFIG_MTD_SBC_GXX is not set
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
CONFIG_MTD_INTEL_VR_NOR=m
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
# CONFIG_MTD_ONENAND_SIM is not set

#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=128000
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=m
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_FJKEYINF is not set
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_ATIIXP=m
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
CONFIG_DM_MULTIPATH_RDAC=m
# CONFIG_DM_MULTIPATH_HP is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
CONFIG_FIXED_MII_1000_FDX=y
CONFIG_FIXED_MII_AMNT=1
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
CONFIG_BNX2=m
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_USB_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
CONFIG_B43_DEBUG=y
CONFIG_B43_DMA=y
# CONFIG_B43_DMA_AND_PIO_MODE is not set
CONFIG_B43_DMA_MODE=y
# CONFIG_B43_PIO_MODE is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_ATLAS_BTNS=m
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
CONFIG_NVRAM=y
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=4096
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=m
# CONFIG_TCG_INFINEON is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_OZ99X is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m

#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_POWER_SUPPLY=m
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_LTV350QV=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CORGI=m
CONFIG_BACKLIGHT_PROGEAR=m

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_DETECT is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# SPI devices
#

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=m
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_PASSWORDS is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m

#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
# CONFIG_LEDS_CLEVO_MAIL is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_RS5C348 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=852
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-2"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m

#
# Layered filesystems
#
# CONFIG_ECRYPT_FS is not set
# CONFIG_UNION_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_FAULT_INJECTION is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 13:48     ` 2.6.24-rc6-mm1 Rafael J. Wysocki
@ 2007-12-23 13:53       ` Rafael J. Wysocki
  2007-12-23 20:09         ` 2.6.24-rc6-mm1 Sam Ravnborg
  0 siblings, 1 reply; 146+ messages in thread
From: Rafael J. Wysocki @ 2007-12-23 13:53 UTC (permalink / raw)
  To: Ingo Molnar; +Cc: Andrew Morton, linux-kernel

On Sunday, 23 of December 2007, Rafael J. Wysocki wrote:
> On Sunday, 23 of December 2007, Ingo Molnar wrote:
> > 
> > * Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > 
> > > Well it doesn't build on x86-64 for me:
> > > 
> > >   CHK     include/linux/compile.h
> > >   CC      arch/x86/ia32/../../../fs/compat_binfmt_elf.o
> > > Assembler messages:
> > > Fatal error: can't create arch/x86/ia32/../../../fs/.tmp_compat_binfmt_elf.o: No such file or directory
> > > make[2]: *** [arch/x86/ia32/../../../fs/compat_binfmt_elf.o] Error 2
> > > 
> > > I will post the .config if anyone is interested.
> > 
> > yes, please send the .config.
> 
> Attached.
> 
> It also may be relevant that I compile the kernel with "make O=../build".

I ran the compilation once again and it worked.  Strange.

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
  2007-12-23 11:04 ` 2.6.24-rc6-mm1 Ingo Molnar
  2007-12-23 12:35 ` 2.6.24-rc6-mm1 Rafael J. Wysocki
@ 2007-12-23 16:27 ` Torsten Kaiser
  2007-12-23 20:39   ` 2.6.24-rc6-mm1 Andrew Morton
  2007-12-28 22:53   ` 2.6.24-rc6-mm1 Torsten Kaiser
  2007-12-23 22:54 ` 2.6.24-rc6-mm1: suspend broken on HP nx6325 due to cpufreq changes Rafael J. Wysocki
                   ` (17 subsequent siblings)
  20 siblings, 2 replies; 146+ messages in thread
From: Torsten Kaiser @ 2007-12-23 16:27 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

On Dec 23, 2007 8:30 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
[snip]
> +agk-dm-dm-snapshot-use-uninitialized_var.patch
> +agk-dm-dm-raid1-handle-write-failures.patch
> +agk-dm-dm-raid1-report-fault-status.patch
> +agk-dm-dm-raid1-fix-eio-after-log-failure.patch
> +agk-dm-dm-raid1-handle-read-failures.patch
> +agk-dm-dm-raid1-mark-and-clear-nosync-writes.patch
>
>  device-mapper tree updates
[snip]
> +gregkh-driver-kref-add-kref_set.patch
> +gregkh-driver-kobject-convert-sys-firmware-acpi-to-use-kobject_create.patch
> +gregkh-driver-kobject-change-net-bridge-to-use-kobject_create_and_add.patch
> +gregkh-driver-kobject-change-gfs2-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-infiniband-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-firmware-eddc-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-firmware-efivarsc-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-cpufreq-cpufreqc-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-edac-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-cpuidle-sysfsc-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-pci-hotplug-pci_hotplug_corec-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-base-sysc-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-arch-x86-kernel-cpu-intel_cacheinfoc-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-acpi-systemc-to-use-kobject_create_and_add.patch
> +gregkh-driver-kobject-change-drivers-block-pktcdvdc-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-arch-sh-kernel-cpu-sh4-sqc-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-net-ibmvethc-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-parisc-pdc_stablec-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-arch-ia64-kernel-topologyc-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-drivers-md-mdc-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-change-arch-x86-kernel-cpu-mcheck-mce_amd_64c-to-use-kobject_create_and_add.patch
> +gregkh-driver-kobject-change-arch-x86-kernel-cpu-mcheck-mce_amd_64c-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-the-cris-iop_fw_loadc-code-is-broken.patch
> +gregkh-driver-kobject-convert-drivers-base-classc-to-use-kobject_init-add_ng.patch
> +gregkh-driver-kobject-convert-drivers-base-corec-to-use-kobject_init-add_ng.patch
> +gregkh-driver-kobject-convert-drivers-net-iseries_vethc-to-use-kobject_init-add_ng.patch
> +gregkh-driver-kobject-convert-fs-char_devc-to-use-kobject_init-add_ng.patch
> +gregkh-driver-kobject-convert-kernel-paramsc-to-use-kobject_init-add_ng.patch
> +gregkh-driver-kobject-convert-kernel-userc-to-use-kobject_init-add_ng.patch
> +gregkh-driver-kobject-convert-mm-slubc-to-use-kobject_init-add_ng.patch
> +gregkh-driver-kobject-convert-net-bridge-br_ifc-to-use-kobject_init-add_ng.patch
> +gregkh-driver-driver-add-driver_add_kobj-for-looney-iseries_veth-driver.patch
> +gregkh-driver-kobject-change-drivers-base-bus-to-use-kobject_init_and_add.patch
> +gregkh-driver-kobject-convert-block-elevatorc-to-use-kobject_init-add_ng.patch
> +gregkh-driver-kobject-convert-block-ll_rw_blkc-to-use-kobject_init-add_ng.patch
> +gregkh-driver-kobject-convert-drivers-md-mdc-to-use-kobject_init-add_ng.patch
> +gregkh-driver-kobject-convert-kernel-modulec-to-use-kobject_init-add_ng.patch
> +gregkh-driver-kobject-remove-kobject_add-as-no-one-uses-it-anymore.patch
> +gregkh-driver-kobject-rename-kobject_add_ng-to-kobject_add.patch
> +gregkh-driver-kobject-remove-kobject_init-as-no-one-uses-it-anymore.patch
> +gregkh-driver-kobject-rename-kobject_init_ng-to-kobject_init.patch
> +gregkh-driver-kobject-remove-kobject_register.patch
> +gregkh-driver-kset-remove-kset_add-function.patch
> +gregkh-driver-kobject-auto-cleanup-on-final-unref.patch
> +gregkh-driver-kobject-convert-arch-from-kobject_unregister-to-kobject_put.patch
> +gregkh-driver-kobject-convert-drivers-from-kobject_unregister-to-kobject_put.patch
> +gregkh-driver-kobject-convert-fs-from-kobject_unregister-to-kobject_put.patch
> +gregkh-driver-kobject-convert-remaining-kobject_unregister-to-kobject_put.patch
> +gregkh-driver-kobject-remove-kobject_unregister-as-no-one-uses-it-anymore.patch
> +gregkh-driver-driver-core-change-sysdev-classes-to-use-dynamic-kobject-names.patch
> +gregkh-driver-kobject-remove-old-outdated-documentation.patch
> +gregkh-driver-kobject-update-the-kobject-kset-documentation.patch
> +gregkh-driver-kobject-add-sample-code-for-how-to-use-kobjects-in-a-simple-manner.patch
> +gregkh-driver-kobject-add-sample-code-for-how-to-use-ksets-ktypes-kobjects.patch
> +gregkh-driver-driver-core-use-list_head-instead-of-call-to-init_list_head-in-__init.patch
[snip]
> +md-support-external-metadata-for-md-arrays.patch
> +md-give-userspace-control-over-removing-failed-devices-when-external-metdata-in-use.patch
> +md-allow-a-maximum-extent-to-be-set-for-resyncing.patch
> +md-allow-devices-to-be-shared-between-md-arrays.patch
> +md-lock-address-when-changing-attributes-of-component-devices.patch
> +md-allow-an-md-array-to-appear-with-0-drives-if-it-has-external-metadata.patch
>
>  RAID updates

I have finally given up on using 2.6.24-rc3-mm2 with slub_debug=FZP to
get more information out of the random crashes I had seen with that
version. (Did not crash once with slub_debug, so no new information on
what the cause was)

2.6.24-rc6-mm1 does not boot for me.
It starts my initrd, but when this wants to start the md devices it crashes:
[   12.900887] Freeing unused kernel memory: 356k freed
[   15.290320] Clocksource tsc unstable (delta = -558415384 ns)
[   34.284845] md: Autodetecting RAID arrays.
[   34.154076] md: Scanned 5 and added 5 devices.
[   34.154076] md: autorun ...
[   34.154080] md: considering sdc2 ...
[   34.155472] md:  adding sdc2 ...
[   34.156728] md:  adding sdb2 ...
[   34.164080] md: sdb1 has different UUID to sdc2
[   34.165836] md:  adding sda2 ...
[   34.174080] md: sda1 has different UUID to sdc2
[   34.175852] md: created md1
[   34.176938] md: bind<sda2>
[   34.184147] md: bind<sdb2>
[   34.185219] md: bind<sdc2>
[   34.186284] md: running: <sdc2><sdb2><sda2>
[   34.194604] md: do_md_run() returned -22
[   34.196123] md: md1 stopped.
[   34.197267] md: unbind<sdc2>
[   34.204105] md: export_rdev(sdc2)
[   34.205426] md: unbind<sdb2>
[   34.206548] md: export_rdev(sdb2)
[   34.214102] md: unbind<sda2>
[   34.215223] md: export_rdev(sda2)
[   34.216544] md: considering sdb1 ...
[   34.224083] md:  adding sdb1 ...
[   34.225337] md:  adding sda1 ...
[   34.226696] Unable to handle kernel paging request at 0000000034333545 RIP:
[   34.228481]  [<ffffffff803b49a1>] kref_put+0x31/0x80
[   34.231378] PGD 7e402067 PUD 7e924067 PMD 0
[   34.233084] Oops: 0002 [1] SMP
[   34.234076] last sysfs file: /sys/devices/virtual/block/md1/dev
[   34.234076] CPU 3
[   34.234076] Modules linked in:
[   34.234076] Pid: 18, comm: events/3 Not tainted 2.6.24-rc6-mm1 #1
[   34.234076] RIP: 0010:[<ffffffff803b49a1>]  [<ffffffff803b49a1>]
kref_put+0x31/0x80
[   34.234076] RSP: 0018:ffff81007ffd5e00  EFLAGS: 00010202
[   34.234076] RAX: 0000000000000000 RBX: 0000000034333545 RCX: ffffffff80606270
[   34.234076] RDX: 0000000000000040 RSI: ffffffff803b38b0 RDI: 0000000034333545
[   34.234076] RBP: ffff81007ffd5e10 R08: 0000000000000001 R09: 0000000000000000
[   34.234076] R10: ffffffff8094c430 R11: 0000000000000000 R12: ffffffff803b38b0
[   34.234076] R13: ffff81011ed434d8 R14: ffffffff804d7d50 R15: ffff81011ff220f0
[   34.234076] FS:  0000000000c7f870(0000) GS:ffff81011ff20280(0000)
knlGS:0000000000000000
[   34.234076] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[   34.234076] CR2: 0000000034333545 CR3: 000000007e5bc000 CR4: 00000000000006e0
[   34.234076] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   34.234076] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   34.234076] Process events/3 (pid: 18, threadinfo ffff81007ffd4000,
task ffff81007ffd2000)
[   34.234076] Stack:  ffff81011ed43460 ffff81011ff220c0
ffff81007ffd5e20 ffffffff803b37e9
[   34.234076]  ffff81007ffd5e40 ffffffff803b389b ffff81007ffd5e50
ffff81011ed434e0
[   34.234076]  ffff81007ffd5e50 ffffffff804d7d5d ffff81007ffd5eb0
ffffffff80249775
[   34.234076] Call Trace:
[   34.234076]  [<ffffffff803b37e9>] kobject_put+0x19/0x20
[   34.234076]  [<ffffffff803b389b>] kobject_del+0x2b/0x40
[   34.234076]  [<ffffffff804d7d5d>] delayed_delete+0xd/0x10
[   34.234076]  [<ffffffff80249775>] run_workqueue+0x175/0x210
[   34.234076]  [<ffffffff8024a411>] worker_thread+0x71/0xb0
[   34.234076]  [<ffffffff8024d9e0>] autoremove_wake_function+0x0/0x40
[   34.234076]  [<ffffffff8024a3a0>] worker_thread+0x0/0xb0
[   34.234076]  [<ffffffff8024d5fd>] kthread+0x4d/0x80
[   34.234076]  [<ffffffff8020c4b8>] child_rip+0xa/0x12
[   34.234076]  [<ffffffff8020bbcf>] restore_args+0x0/0x30
[   34.234076]  [<ffffffff8024d5b0>] kthread+0x0/0x80
[   34.234076]  [<ffffffff8020c4ae>] child_rip+0x0/0x12
[   34.234076]
[   34.234076]
[   34.234076] Code: f0 ff 0b 0f 94 c0 31 d2 84 c0 74 0b 48 89 df 41 ff d4 ba 01
[   34.234076] RIP  [<ffffffff803b49a1>] kref_put+0x31/0x80
[   34.234076]  RSP <ffff81007ffd5e00>
[   34.234076] CR2: 0000000034333545
[   34.234080] ---[ end trace 303353bd9dfe95b0 ]---
[   34.236037] md: created md0
[   34.237125] md: bind<sda1>
[   34.244088] md: bind<sdb1>
[   34.245152] md: running: <sdb1><sda1>
[   34.246626] md: do_md_run() returned -22
[   34.254078] md: md0 stopped.
[   45.657898] SysRq : Resetting

# cat /proc/mdstat
Personalities : [raid1] [raid6] [raid5] [raid4]
md0 : active raid1 sdb1[1] sda1[0]
      9775424 blocks [2/2] [UU]
      bitmap: 0/150 pages [0KB], 32KB chunk

md1 : active raid5 sdc2[2] sdb2[1] sda2[0]
      605586048 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU]
      bitmap: 2/145 pages [8KB], 1024KB chunk

unused devices: <none>

Should I blame the raid1 changes or the kobject changes?

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 13:53       ` 2.6.24-rc6-mm1 Rafael J. Wysocki
@ 2007-12-23 20:09         ` Sam Ravnborg
  2007-12-23 22:44           ` 2.6.24-rc6-mm1 Rafael J. Wysocki
  0 siblings, 1 reply; 146+ messages in thread
From: Sam Ravnborg @ 2007-12-23 20:09 UTC (permalink / raw)
  To: Rafael J. Wysocki; +Cc: Ingo Molnar, Andrew Morton, linux-kernel

On Sun, Dec 23, 2007 at 02:53:34PM +0100, Rafael J. Wysocki wrote:
> On Sunday, 23 of December 2007, Rafael J. Wysocki wrote:
> > On Sunday, 23 of December 2007, Ingo Molnar wrote:
> > > 
> > > * Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > > 
> > > > Well it doesn't build on x86-64 for me:
> > > > 
> > > >   CHK     include/linux/compile.h
> > > >   CC      arch/x86/ia32/../../../fs/compat_binfmt_elf.o
> > > > Assembler messages:
> > > > Fatal error: can't create arch/x86/ia32/../../../fs/.tmp_compat_binfmt_elf.o: No such file or directory
> > > > make[2]: *** [arch/x86/ia32/../../../fs/compat_binfmt_elf.o] Error 2
> > > > 
> > > > I will post the .config if anyone is interested.
> > > 
> > > yes, please send the .config.
> > 
> > Attached.
> > 
> > It also may be relevant that I compile the kernel with "make O=../build".
> 
> I ran the compilation once again and it worked.  Strange.
Try to delete your fs/ directory in your output dir.
Then I expect the same bug to surface again.

I guess it is because arch/x86/ia32/ is built before fs/ and
gcc cannot create directories for the output files and
it is the dependency files that triggers the error as this
is the first file to be generated.
The right fix is to move the build of compat_binfmt_elf to
fs/Makefile as already discussed.

	Sam

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 16:27 ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2007-12-23 20:39   ` Andrew Morton
  2007-12-27 11:42     ` 2.6.24-rc6-mm1 Torsten Kaiser
  2007-12-28 22:53   ` 2.6.24-rc6-mm1 Torsten Kaiser
  1 sibling, 1 reply; 146+ messages in thread
From: Andrew Morton @ 2007-12-23 20:39 UTC (permalink / raw)
  To: Torsten Kaiser; +Cc: linux-kernel, Alasdair G Kergon, Greg KH

On Sun, 23 Dec 2007 17:27:12 +0100 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:

> On Dec 23, 2007 8:30 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> [snip]
> > +agk-dm-dm-snapshot-use-uninitialized_var.patch
> > +agk-dm-dm-raid1-handle-write-failures.patch
> > +agk-dm-dm-raid1-report-fault-status.patch
> > +agk-dm-dm-raid1-fix-eio-after-log-failure.patch
> > +agk-dm-dm-raid1-handle-read-failures.patch
> > +agk-dm-dm-raid1-mark-and-clear-nosync-writes.patch
> >
> >  device-mapper tree updates
> [snip]
> > +gregkh-driver-kref-add-kref_set.patch
> > +gregkh-driver-kobject-convert-sys-firmware-acpi-to-use-kobject_create.patch
> > +gregkh-driver-kobject-change-net-bridge-to-use-kobject_create_and_add.patch
> > +gregkh-driver-kobject-change-gfs2-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-infiniband-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-firmware-eddc-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-firmware-efivarsc-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-cpufreq-cpufreqc-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-edac-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-cpuidle-sysfsc-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-pci-hotplug-pci_hotplug_corec-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-base-sysc-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-arch-x86-kernel-cpu-intel_cacheinfoc-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-acpi-systemc-to-use-kobject_create_and_add.patch
> > +gregkh-driver-kobject-change-drivers-block-pktcdvdc-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-arch-sh-kernel-cpu-sh4-sqc-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-net-ibmvethc-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-parisc-pdc_stablec-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-arch-ia64-kernel-topologyc-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-drivers-md-mdc-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-change-arch-x86-kernel-cpu-mcheck-mce_amd_64c-to-use-kobject_create_and_add.patch
> > +gregkh-driver-kobject-change-arch-x86-kernel-cpu-mcheck-mce_amd_64c-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-the-cris-iop_fw_loadc-code-is-broken.patch
> > +gregkh-driver-kobject-convert-drivers-base-classc-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-kobject-convert-drivers-base-corec-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-kobject-convert-drivers-net-iseries_vethc-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-kobject-convert-fs-char_devc-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-kobject-convert-kernel-paramsc-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-kobject-convert-kernel-userc-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-kobject-convert-mm-slubc-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-kobject-convert-net-bridge-br_ifc-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-driver-add-driver_add_kobj-for-looney-iseries_veth-driver.patch
> > +gregkh-driver-kobject-change-drivers-base-bus-to-use-kobject_init_and_add.patch
> > +gregkh-driver-kobject-convert-block-elevatorc-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-kobject-convert-block-ll_rw_blkc-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-kobject-convert-drivers-md-mdc-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-kobject-convert-kernel-modulec-to-use-kobject_init-add_ng.patch
> > +gregkh-driver-kobject-remove-kobject_add-as-no-one-uses-it-anymore.patch
> > +gregkh-driver-kobject-rename-kobject_add_ng-to-kobject_add.patch
> > +gregkh-driver-kobject-remove-kobject_init-as-no-one-uses-it-anymore.patch
> > +gregkh-driver-kobject-rename-kobject_init_ng-to-kobject_init.patch
> > +gregkh-driver-kobject-remove-kobject_register.patch
> > +gregkh-driver-kset-remove-kset_add-function.patch
> > +gregkh-driver-kobject-auto-cleanup-on-final-unref.patch
> > +gregkh-driver-kobject-convert-arch-from-kobject_unregister-to-kobject_put.patch
> > +gregkh-driver-kobject-convert-drivers-from-kobject_unregister-to-kobject_put.patch
> > +gregkh-driver-kobject-convert-fs-from-kobject_unregister-to-kobject_put.patch
> > +gregkh-driver-kobject-convert-remaining-kobject_unregister-to-kobject_put.patch
> > +gregkh-driver-kobject-remove-kobject_unregister-as-no-one-uses-it-anymore.patch
> > +gregkh-driver-driver-core-change-sysdev-classes-to-use-dynamic-kobject-names.patch
> > +gregkh-driver-kobject-remove-old-outdated-documentation.patch
> > +gregkh-driver-kobject-update-the-kobject-kset-documentation.patch
> > +gregkh-driver-kobject-add-sample-code-for-how-to-use-kobjects-in-a-simple-manner.patch
> > +gregkh-driver-kobject-add-sample-code-for-how-to-use-ksets-ktypes-kobjects.patch
> > +gregkh-driver-driver-core-use-list_head-instead-of-call-to-init_list_head-in-__init.patch
> [snip]
> > +md-support-external-metadata-for-md-arrays.patch
> > +md-give-userspace-control-over-removing-failed-devices-when-external-metdata-in-use.patch
> > +md-allow-a-maximum-extent-to-be-set-for-resyncing.patch
> > +md-allow-devices-to-be-shared-between-md-arrays.patch
> > +md-lock-address-when-changing-attributes-of-component-devices.patch
> > +md-allow-an-md-array-to-appear-with-0-drives-if-it-has-external-metadata.patch
> >
> >  RAID updates
> 
> I have finally given up on using 2.6.24-rc3-mm2 with slub_debug=FZP to
> get more information out of the random crashes I had seen with that
> version. (Did not crash once with slub_debug, so no new information on
> what the cause was)
> 
> 2.6.24-rc6-mm1 does not boot for me.
> It starts my initrd, but when this wants to start the md devices it crashes:
> [   12.900887] Freeing unused kernel memory: 356k freed
> [   15.290320] Clocksource tsc unstable (delta = -558415384 ns)
> [   34.284845] md: Autodetecting RAID arrays.
> [   34.154076] md: Scanned 5 and added 5 devices.
> [   34.154076] md: autorun ...
> [   34.154080] md: considering sdc2 ...
> [   34.155472] md:  adding sdc2 ...
> [   34.156728] md:  adding sdb2 ...
> [   34.164080] md: sdb1 has different UUID to sdc2
> [   34.165836] md:  adding sda2 ...
> [   34.174080] md: sda1 has different UUID to sdc2
> [   34.175852] md: created md1
> [   34.176938] md: bind<sda2>
> [   34.184147] md: bind<sdb2>
> [   34.185219] md: bind<sdc2>
> [   34.186284] md: running: <sdc2><sdb2><sda2>
> [   34.194604] md: do_md_run() returned -22
> [   34.196123] md: md1 stopped.
> [   34.197267] md: unbind<sdc2>
> [   34.204105] md: export_rdev(sdc2)
> [   34.205426] md: unbind<sdb2>
> [   34.206548] md: export_rdev(sdb2)
> [   34.214102] md: unbind<sda2>
> [   34.215223] md: export_rdev(sda2)
> [   34.216544] md: considering sdb1 ...
> [   34.224083] md:  adding sdb1 ...
> [   34.225337] md:  adding sda1 ...
> [   34.226696] Unable to handle kernel paging request at 0000000034333545 RIP:
> [   34.228481]  [<ffffffff803b49a1>] kref_put+0x31/0x80
> [   34.231378] PGD 7e402067 PUD 7e924067 PMD 0
> [   34.233084] Oops: 0002 [1] SMP
> [   34.234076] last sysfs file: /sys/devices/virtual/block/md1/dev
> [   34.234076] CPU 3
> [   34.234076] Modules linked in:
> [   34.234076] Pid: 18, comm: events/3 Not tainted 2.6.24-rc6-mm1 #1
> [   34.234076] RIP: 0010:[<ffffffff803b49a1>]  [<ffffffff803b49a1>]
> kref_put+0x31/0x80
> [   34.234076] RSP: 0018:ffff81007ffd5e00  EFLAGS: 00010202
> [   34.234076] RAX: 0000000000000000 RBX: 0000000034333545 RCX: ffffffff80606270
> [   34.234076] RDX: 0000000000000040 RSI: ffffffff803b38b0 RDI: 0000000034333545
> [   34.234076] RBP: ffff81007ffd5e10 R08: 0000000000000001 R09: 0000000000000000
> [   34.234076] R10: ffffffff8094c430 R11: 0000000000000000 R12: ffffffff803b38b0
> [   34.234076] R13: ffff81011ed434d8 R14: ffffffff804d7d50 R15: ffff81011ff220f0
> [   34.234076] FS:  0000000000c7f870(0000) GS:ffff81011ff20280(0000)
> knlGS:0000000000000000
> [   34.234076] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> [   34.234076] CR2: 0000000034333545 CR3: 000000007e5bc000 CR4: 00000000000006e0
> [   34.234076] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [   34.234076] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [   34.234076] Process events/3 (pid: 18, threadinfo ffff81007ffd4000,
> task ffff81007ffd2000)
> [   34.234076] Stack:  ffff81011ed43460 ffff81011ff220c0
> ffff81007ffd5e20 ffffffff803b37e9
> [   34.234076]  ffff81007ffd5e40 ffffffff803b389b ffff81007ffd5e50
> ffff81011ed434e0
> [   34.234076]  ffff81007ffd5e50 ffffffff804d7d5d ffff81007ffd5eb0
> ffffffff80249775
> [   34.234076] Call Trace:
> [   34.234076]  [<ffffffff803b37e9>] kobject_put+0x19/0x20
> [   34.234076]  [<ffffffff803b389b>] kobject_del+0x2b/0x40
> [   34.234076]  [<ffffffff804d7d5d>] delayed_delete+0xd/0x10
> [   34.234076]  [<ffffffff80249775>] run_workqueue+0x175/0x210
> [   34.234076]  [<ffffffff8024a411>] worker_thread+0x71/0xb0
> [   34.234076]  [<ffffffff8024d9e0>] autoremove_wake_function+0x0/0x40
> [   34.234076]  [<ffffffff8024a3a0>] worker_thread+0x0/0xb0
> [   34.234076]  [<ffffffff8024d5fd>] kthread+0x4d/0x80
> [   34.234076]  [<ffffffff8020c4b8>] child_rip+0xa/0x12
> [   34.234076]  [<ffffffff8020bbcf>] restore_args+0x0/0x30
> [   34.234076]  [<ffffffff8024d5b0>] kthread+0x0/0x80
> [   34.234076]  [<ffffffff8020c4ae>] child_rip+0x0/0x12
> [   34.234076]
> [   34.234076]
> [   34.234076] Code: f0 ff 0b 0f 94 c0 31 d2 84 c0 74 0b 48 89 df 41 ff d4 ba 01
> [   34.234076] RIP  [<ffffffff803b49a1>] kref_put+0x31/0x80
> [   34.234076]  RSP <ffff81007ffd5e00>
> [   34.234076] CR2: 0000000034333545
> [   34.234080] ---[ end trace 303353bd9dfe95b0 ]---
> [   34.236037] md: created md0
> [   34.237125] md: bind<sda1>
> [   34.244088] md: bind<sdb1>
> [   34.245152] md: running: <sdb1><sda1>
> [   34.246626] md: do_md_run() returned -22
> [   34.254078] md: md0 stopped.
> [   45.657898] SysRq : Resetting
> 
> # cat /proc/mdstat
> Personalities : [raid1] [raid6] [raid5] [raid4]
> md0 : active raid1 sdb1[1] sda1[0]
>       9775424 blocks [2/2] [UU]
>       bitmap: 0/150 pages [0KB], 32KB chunk
> 
> md1 : active raid5 sdc2[2] sdb2[1] sda2[0]
>       605586048 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU]
>       bitmap: 2/145 pages [8KB], 1024KB chunk
> 
> unused devices: <none>
> 
> Should I blame the raid1 changes or the kobject changes?
> 

I don't know.  It could even be that both patch series are OK but when they
are combined, things fail.

Greg, Alasdair: the above looks like a preview of 2.6.25-rc1 :(


^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 20:09         ` 2.6.24-rc6-mm1 Sam Ravnborg
@ 2007-12-23 22:44           ` Rafael J. Wysocki
  2008-01-02 20:05             ` [patch] x86 compat_binfmt_elf, Makefile fixes (was: Re: 2.6.24-rc6-mm1) Ingo Molnar
  0 siblings, 1 reply; 146+ messages in thread
From: Rafael J. Wysocki @ 2007-12-23 22:44 UTC (permalink / raw)
  To: Sam Ravnborg; +Cc: Ingo Molnar, Andrew Morton, linux-kernel

On Sunday, 23 of December 2007, Sam Ravnborg wrote:
> On Sun, Dec 23, 2007 at 02:53:34PM +0100, Rafael J. Wysocki wrote:
> > On Sunday, 23 of December 2007, Rafael J. Wysocki wrote:
> > > On Sunday, 23 of December 2007, Ingo Molnar wrote:
> > > > 
> > > > * Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > > > 
> > > > > Well it doesn't build on x86-64 for me:
> > > > > 
> > > > >   CHK     include/linux/compile.h
> > > > >   CC      arch/x86/ia32/../../../fs/compat_binfmt_elf.o
> > > > > Assembler messages:
> > > > > Fatal error: can't create arch/x86/ia32/../../../fs/.tmp_compat_binfmt_elf.o: No such file or directory
> > > > > make[2]: *** [arch/x86/ia32/../../../fs/compat_binfmt_elf.o] Error 2
> > > > > 
> > > > > I will post the .config if anyone is interested.
> > > > 
> > > > yes, please send the .config.
> > > 
> > > Attached.
> > > 
> > > It also may be relevant that I compile the kernel with "make O=../build".
> > 
> > I ran the compilation once again and it worked.  Strange.
> Try to delete your fs/ directory in your output dir.
> Then I expect the same bug to surface again.

It does surface indeed.

> I guess it is because arch/x86/ia32/ is built before fs/ and
> gcc cannot create directories for the output files and
> it is the dependency files that triggers the error as this
> is the first file to be generated.

I think you are right.

Greetings,
Rafael

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: suspend broken on HP nx6325 due to cpufreq changes
  2007-12-23 22:54 ` 2.6.24-rc6-mm1: suspend broken on HP nx6325 due to cpufreq changes Rafael J. Wysocki
@ 2007-12-23 22:50   ` Andrew Morton
  2007-12-23 22:56     ` Dave Jones
  2007-12-24 11:21     ` Takashi Iwai
  0 siblings, 2 replies; 146+ messages in thread
From: Andrew Morton @ 2007-12-23 22:50 UTC (permalink / raw)
  To: Rafael J. Wysocki; +Cc: linux-kernel, Dave Jones, Jaroslav Kysela, Takashi Iwai

On Sun, 23 Dec 2007 23:54:40 +0100 "Rafael J. Wysocki" <rjw@sisk.pl> wrote:

> On Sunday, 23 of December 2007, Andrew Morton wrote:
> > 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> > 
> > - This kernel doesn't work on i386!
> > 
> >   It oopses late in boot due to an unrevertable change (e3c1b141) in git-x86
> >   which I stared at for a while then I ran out of time and gave up.
> > 
> >   I would have just abandoned this release until it was fixed but I'll be
> >   largely offline for ten days starting tomorrow.
> > 
> >   The culprits have been notified and hopefully we'll have a patch for
> >   hot-fixes/ tomorrow.
> > 
> >   x86_64 and powerpc work OK though.
> > 
> > - git-block is dropped due to more conflicts that I'm prepared to repair
> >   with git-scsi-misc
> > 
> > - git-perfmon is dropped due to conflicts with git-x86
> > 
> > - git-kgdb is dropped due to conflicts with git-x86
> > 
> > - git-newsetup is dropped due to conflicts with git-x86
> > 
> > - Andi's x86 quilt tree is dropped due to conflicts with git-x86
> > 
> > - Someone broke suspend-to-RAM on the t61p again.  It just instantly resumes
> >   itself.
> 
> Suspend is also broken on my HP nx6325 (hangs hard in the last phase of
> suspend) and git-cpufreq.patch is responsible for that (as shown by bisection).
> 
> Reverting git-cpufreq.patch makes suspend work again,

ah.  Thanks.

> although it still is a
> bit flaky (it takes well more than 5 seconds to suspend and the sound adapter
> doesn't work right after the resume, but it starts to work again about 10s
> later).

hm.  There have been some suspend changes in the alsa tree.

And yes, I noticed that susped has become slower too - looks like abot ten
seconds, which is a pretty significant usability irritant.


^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: suspend broken on HP nx6325 due to cpufreq changes
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (2 preceding siblings ...)
  2007-12-23 16:27 ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2007-12-23 22:54 ` Rafael J. Wysocki
  2007-12-23 22:50   ` Andrew Morton
  2007-12-25 21:51 ` 2.6.24-rc6-mm1 Andreas Mohr
                   ` (16 subsequent siblings)
  20 siblings, 1 reply; 146+ messages in thread
From: Rafael J. Wysocki @ 2007-12-23 22:54 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, Dave Jones

On Sunday, 23 of December 2007, Andrew Morton wrote:
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> 
> - This kernel doesn't work on i386!
> 
>   It oopses late in boot due to an unrevertable change (e3c1b141) in git-x86
>   which I stared at for a while then I ran out of time and gave up.
> 
>   I would have just abandoned this release until it was fixed but I'll be
>   largely offline for ten days starting tomorrow.
> 
>   The culprits have been notified and hopefully we'll have a patch for
>   hot-fixes/ tomorrow.
> 
>   x86_64 and powerpc work OK though.
> 
> - git-block is dropped due to more conflicts that I'm prepared to repair
>   with git-scsi-misc
> 
> - git-perfmon is dropped due to conflicts with git-x86
> 
> - git-kgdb is dropped due to conflicts with git-x86
> 
> - git-newsetup is dropped due to conflicts with git-x86
> 
> - Andi's x86 quilt tree is dropped due to conflicts with git-x86
> 
> - Someone broke suspend-to-RAM on the t61p again.  It just instantly resumes
>   itself.

Suspend is also broken on my HP nx6325 (hangs hard in the last phase of
suspend) and git-cpufreq.patch is responsible for that (as shown by bisection).

Reverting git-cpufreq.patch makes suspend work again, although it still is a
bit flaky (it takes well more than 5 seconds to suspend and the sound adapter
doesn't work right after the resume, but it starts to work again about 10s
later).

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: suspend broken on HP nx6325 due to cpufreq changes
  2007-12-23 22:50   ` Andrew Morton
@ 2007-12-23 22:56     ` Dave Jones
  2007-12-24 11:21     ` Takashi Iwai
  1 sibling, 0 replies; 146+ messages in thread
From: Dave Jones @ 2007-12-23 22:56 UTC (permalink / raw)
  To: Andrew Morton
  Cc: Rafael J. Wysocki, linux-kernel, Jaroslav Kysela, Takashi Iwai

On Sun, Dec 23, 2007 at 02:50:03PM -0800, Andrew Morton wrote:

 > > > - Someone broke suspend-to-RAM on the t61p again.  It just instantly resumes
 > > >   itself.
 > > 
 > > Suspend is also broken on my HP nx6325 (hangs hard in the last phase of
 > > suspend) and git-cpufreq.patch is responsible for that (as shown by bisection).
 > > 
 > > Reverting git-cpufreq.patch makes suspend work again,
 > 
 > ah.  Thanks.

I'm not sure how this is 'new' breakage, because git-cpufreq hasn't changed
in a while, other than the integration of that missing #include diff
that sat in -mm.   Maybe some bad interaction with something else that
changed perhaps. *shrug*.

I'm on vacation until the new year, so I'm going out of my way not to look
at bugs for a change.  But I'm not ignoring this completely, I'll make a
note to look at it in January.
 
	Dave

-- 
http://www.codemonkey.org.uk

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 12:35 ` 2.6.24-rc6-mm1 Rafael J. Wysocki
  2007-12-23 13:00   ` 2.6.24-rc6-mm1 Ingo Molnar
@ 2007-12-23 23:09   ` H. Peter Anvin
  1 sibling, 0 replies; 146+ messages in thread
From: H. Peter Anvin @ 2007-12-23 23:09 UTC (permalink / raw)
  To: Rafael J. Wysocki; +Cc: Andrew Morton, linux-kernel, Ingo Molnar

Rafael J. Wysocki wrote:
> On Sunday, 23 of December 2007, Andrew Morton wrote:
>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
>>
>> - This kernel doesn't work on i386!
>>
>>   It oopses late in boot due to an unrevertable change (e3c1b141) in git-x86
>>   which I stared at for a while then I ran out of time and gave up.
>>
>>   I would have just abandoned this release until it was fixed but I'll be
>>   largely offline for ten days starting tomorrow.
>>
>>   The culprits have been notified and hopefully we'll have a patch for
>>   hot-fixes/ tomorrow.
>>
>>   x86_64 and powerpc work OK though.
> 
> Well it doesn't build on x86-64 for me:
> 
>   CHK     include/linux/compile.h
>   CC      arch/x86/ia32/../../../fs/compat_binfmt_elf.o
> Assembler messages:
> Fatal error: can't create arch/x86/ia32/../../../fs/.tmp_compat_binfmt_elf.o: No such file or directory
> make[2]: *** [arch/x86/ia32/../../../fs/compat_binfmt_elf.o] Error 2
> 
> I will post the .config if anyone is interested.
> 

It's a Kbuild race -- if you keep re-building it will eventually build 
the right file.

Not excusable, but that's what's going on.

	-hpa

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: suspend broken on HP nx6325 due to cpufreq changes
  2007-12-23 22:50   ` Andrew Morton
  2007-12-23 22:56     ` Dave Jones
@ 2007-12-24 11:21     ` Takashi Iwai
  2007-12-24 14:13       ` Rafael J. Wysocki
  1 sibling, 1 reply; 146+ messages in thread
From: Takashi Iwai @ 2007-12-24 11:21 UTC (permalink / raw)
  To: Andrew Morton
  Cc: Rafael J. Wysocki, linux-kernel, Dave Jones, Jaroslav Kysela

At Sun, 23 Dec 2007 14:50:03 -0800,
Andrew Morton wrote:
> 
> > although it still is a
> > bit flaky (it takes well more than 5 seconds to suspend and the sound adapter
> > doesn't work right after the resume, but it starts to work again about 10s
> > later).
> 
> hm.  There have been some suspend changes in the alsa tree.

Not really.  The usb-audio suspend support is the only addition on
mm.  It should be irrelevant with on-board HD-audio...


Takashi

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: suspend broken on HP nx6325 due to cpufreq changes
  2007-12-24 11:21     ` Takashi Iwai
@ 2007-12-24 14:13       ` Rafael J. Wysocki
  0 siblings, 0 replies; 146+ messages in thread
From: Rafael J. Wysocki @ 2007-12-24 14:13 UTC (permalink / raw)
  To: Takashi Iwai; +Cc: Andrew Morton, linux-kernel, Dave Jones, Jaroslav Kysela

On Monday, 24 of December 2007, Takashi Iwai wrote:
> At Sun, 23 Dec 2007 14:50:03 -0800,
> Andrew Morton wrote:
> > 
> > > although it still is a
> > > bit flaky (it takes well more than 5 seconds to suspend and the sound adapter
> > > doesn't work right after the resume, but it starts to work again about 10s
> > > later).
> > 
> > hm.  There have been some suspend changes in the alsa tree.
> 
> Not really.  The usb-audio suspend support is the only addition on
> mm.  It should be irrelevant with on-board HD-audio...

Well, I'm suspecting some ACPI changes, but will be only able to debug it
further in a couple of days.

Rafael

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (3 preceding siblings ...)
  2007-12-23 22:54 ` 2.6.24-rc6-mm1: suspend broken on HP nx6325 due to cpufreq changes Rafael J. Wysocki
@ 2007-12-25 21:51 ` Andreas Mohr
  2007-12-26  5:43 ` 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage Valdis.Kletnieks
                   ` (15 subsequent siblings)
  20 siblings, 0 replies; 146+ messages in thread
From: Andreas Mohr @ 2007-12-25 21:51 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

Hi,

another one most likely related to the recent NFS_V4 define build error
saga:

  CC      fs/nfs/super.o
fs/nfs/super.c: In function 'nfs_sb_deactive':
fs/nfs/super.c:338: error: 'TASK_NORMAL' undeclared (first use in this function)
fs/nfs/super.c:338: error: (Each undeclared identifier is reported only once
fs/nfs/super.c:338: error: for each function it appears in.)
fs/nfs/super.c: In function 'nfs_put_super':
fs/nfs/super.c:349: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function)
fs/nfs/super.c:349: error: implicit declaration of function 'schedule'
make[3]: *** [fs/nfs/super.o] Error 1
make[2]: *** [fs/nfs] Error 2
make[1]: *** [fs] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.24-rc6-mm1.system-gate-patch'
make: *** [debian/stamp-build-kernel] Error 2


This was hand-patched from earlier kernel versions, however I wouldn't
think there was any problem due to this (a cleanly extracted version
doesn't show any md5sum difference for fs/nfs/super.c).

[plus hotfix x86-fix-system-gate-related-crash.patch]

I'm circa 120% sure there must be a sched.h include missing there, given the
whereabouts of these APIs ;)


CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y


i386 K6-III@150, gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)

Thanks,

Andreas Mohr

^ permalink raw reply	[flat|nested] 146+ messages in thread

* 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (4 preceding siblings ...)
  2007-12-25 21:51 ` 2.6.24-rc6-mm1 Andreas Mohr
@ 2007-12-26  5:43 ` Valdis.Kletnieks
  2007-12-26  7:34   ` James Morris
  2007-12-26  8:37 ` 2.6.24-rc6-mm1 Dave Young
                   ` (14 subsequent siblings)
  20 siblings, 1 reply; 146+ messages in thread
From: Valdis.Kletnieks @ 2007-12-26  5:43 UTC (permalink / raw)
  To: Andrew Morton, Paul Moore; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2702 bytes --]

On Sat, 22 Dec 2007 23:30:56 PST, Andrew Morton said:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/

I've bisected it down this far:

kvm-ist-kaput.patch     GOOD
git-lblnet.patch
git-lblnet-fixup.patch
git-leds.patch
git-libata-all.patch
git-libata-all-fix-pata_winbond-borkage.patch
git-libata-all-wtf.patch        BAD

and somehow, I doubt the leds or libata trees horked up networking. ;)

Symptoms - semi-sporadic failures in making network connections.  The test
case that tripped it up was the 'make test' from the Tcl 8.5 - several of the
test cases will create a listening socket, and then try to connect to it.
Under 2.6.24-rc5-mm1, it works just fine, but I'm seeing hangs under -rc6-mm1.
Doing a 'netstat -n -a -A inet -p' while it's hung shows me this:

Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address               Foreign Address             State       PID/Program name   
tcp        0      0 127.0.0.1:34118             0.0.0.0:*                   LISTEN      2236/tcltest        
tcp        0      1 127.0.0.1:59460             127.0.0.1:34118             SYN_SENT    2236/tcltest        
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address               Foreign Address             State       PID/Program name   
tcp        0      0 127.0.0.1:47842             0.0.0.0:*                   LISTEN      2352/tcltest        
tcp        0      1 127.0.0.1:46510             127.0.0.1:47842             SYN_SENT    2352/tcltest        
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address               Foreign Address             State       PID/Program name   
tcp        0      0 127.0.0.1:47842             0.0.0.0:*                   LISTEN      2352/tcltest        
tcp        0      1 127.0.0.1:46510             127.0.0.1:47842             SYN_SENT    2352/tcltest        

Pretty consistent failure mode - a socket is in 'listen', and the connection
gets hung in 'SYN_SENT'. There's 3 outputs listed - the first one from one run
of the test case, the second 2 are some 20 seconds apart on the same run.
It's pretty obvious that if you can't complete a 3-packet handshake to loopback
in 20 seconds, something is hosed.  However, it's apparently some sort of
race/timing issue, as many *other* test cases in the Tcl test tree do in fact
work OK.

I already checked, it's not a slam-dunk to just 'patch -R' as there's 3 or 4
conflicts where later patches need massaging/reverting as well.

It's a problem with both 'classic RCU' and 'preempt RCU' (that was my *first*
guess as to the cause).

Any clues/hints/advice/patches?

[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage
  2007-12-26  5:43 ` 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage Valdis.Kletnieks
@ 2007-12-26  7:34   ` James Morris
  2007-12-26  8:25     ` Valdis.Kletnieks
  0 siblings, 1 reply; 146+ messages in thread
From: James Morris @ 2007-12-26  7:34 UTC (permalink / raw)
  To: Valdis.Kletnieks; +Cc: Andrew Morton, Paul Moore, linux-kernel

On Wed, 26 Dec 2007, Valdis.Kletnieks@vt.edu wrote:

> I already checked, it's not a slam-dunk to just 'patch -R' as there's 3 or 4
> conflicts where later patches need massaging/reverting as well.
> 
> It's a problem with both 'classic RCU' and 'preempt RCU' (that was my *first*
> guess as to the cause).
> 
> Any clues/hints/advice/patches?

Can you post your .config ?

Also, is that the plain upstream Tcl package you're compiling, or a distro 
package?

-- 
James Morris
<jmorris@namei.org>

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage
  2007-12-26  7:34   ` James Morris
@ 2007-12-26  8:25     ` Valdis.Kletnieks
  2007-12-26  8:52       ` James Morris
  0 siblings, 1 reply; 146+ messages in thread
From: Valdis.Kletnieks @ 2007-12-26  8:25 UTC (permalink / raw)
  To: James Morris; +Cc: Andrew Morton, Paul Moore, linux-kernel


[-- Attachment #1.1: Type: text/plain, Size: 730 bytes --]

On Wed, 26 Dec 2007 18:34:26 +1100, James Morris said:

> Can you post your .config ?

The gzip'ed config as of when I quit bisecting is attached.  It's probably
not directly usable unless you have a quilt tree that's positioned fairly
close to git-lblnet.patch.

> Also, is that the plain upstream Tcl package you're compiling, or a distro 
> package?

It's actually a CVS pull of the upstream, but tcl 8.5 was released back on 
12/19, and there's nothing obvious in the 4 commits since then.  So you should
be able to snarf a 8.5 source tarball, untar it, 'cd tcl/unix', run
./configure, make, make test, and that should replicate it - the 'socket'
test hangs quite consistently for me, and a few earlier ones *sometimes*
hang.

[-- Attachment #1.2: config-lblnet.gz --]
[-- Type: application/x-gzip , Size: 12240 bytes --]

[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (5 preceding siblings ...)
  2007-12-26  5:43 ` 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage Valdis.Kletnieks
@ 2007-12-26  8:37 ` Dave Young
  2007-12-26 12:29 ` 2.6.24-rc6-mm1: some section mismatches on sparc64 Mariusz Kozlowski
                   ` (13 subsequent siblings)
  20 siblings, 0 replies; 146+ messages in thread
From: Dave Young @ 2007-12-26  8:37 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

There's some section mismatch warnings :

 MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x1685c): Section mismatch: reference to
.init.data: (between 'check_dev_quirk' and 'apm_error')
WARNING: vmlinux.o(.text+0x1687b): Section mismatch: reference to
.init.data: (between 'check_dev_quirk' and 'apm_error')
WARNING: vmlinux.o(.text+0x16885): Section mismatch: reference to
.init.data:early_qrk (between 'check_dev_quirk' and 'apm_error')
WARNING: vmlinux.o(.text+0x16890): Section mismatch: reference to
.init.data: (between 'check_dev_quirk' and 'apm_error')
WARNING: vmlinux.o(.text+0x168a3): Section mismatch: reference to
.init.data: (between 'check_dev_quirk' and 'apm_error')
WARNING: vmlinux.o(.text+0x168ab): Section mismatch: reference to
.init.data: (between 'check_dev_quirk' and 'apm_error')
WARNING: vmlinux.o(.text+0x168b3): Section mismatch: reference to
.init.data: (between 'check_dev_quirk' and 'apm_error')
WARNING: vmlinux.o(.text+0x168cd): Section mismatch: reference to
.init.data: (between 'check_dev_quirk' and 'apm_error')
WARNING: vmlinux.o(.text+0x168d3): Section mismatch: reference to
.init.data: (between 'check_dev_quirk' and 'apm_error')
WARNING: vmlinux.o(.text+0x168dc): Section mismatch: reference to
.init.data: (between 'check_dev_quirk' and 'apm_error')
WARNING: vmlinux.o(.text+0x168e5): Section mismatch: reference to
.init.data: (between 'check_dev_quirk' and 'apm_error')

config file :

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6-mm1
# Tue Dec 25 14:47:52 2007
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_LSF=y
CONFIG_BLK_DEV_BSG=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_SUPPORTS_KVM=y
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_RCU_TRACE=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
CONFIG_HIGHPTE=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
# CONFIG_ACPI_SBS is not set
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUSB is not set
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_RCSIMPLE=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set

#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
# CONFIG_MTD_BLKDEVS is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PNC2000 is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_FJKEYINF is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CY82C693=y
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_CS5535=y
CONFIG_BLK_DEV_HPT34X=y
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_SC1200=y
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
CONFIG_BLK_DEV_IT821X=y
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set

#
# Other IDE chipsets support
#

#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
CONFIG_SATA_SIL24=y
CONFIG_SATA_SIS=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=y
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
CONFIG_ELPLUS=m
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_USB_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=m
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
# CONFIG_JOYSTICK_IFORCE_USB is not set
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_WISTRON_BTNS=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_HVC_DRIVER=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_I2C_SIMTEC is not set
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_OZ99X is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_SAA7134=m
# CONFIG_VIDEO_SAA7134_ALSA is not set
# CONFIG_VIDEO_MXB is not set
CONFIG_VIDEO_DPC=m
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_VIDEO_PVRUSB2=m
# CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR is not set
# CONFIG_VIDEO_PVRUSB2_ONAIR_USB2 is not set
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_USBVIDEO=m
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
CONFIG_USB_QUICKCAM_MESSENGER=m
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_TUNER=m
# CONFIG_VIDEO_TUNER_CUSTOMIZE is not set
CONFIG_TUNER_XC2028=m
CONFIG_TUNER_MT20XX=m
CONFIG_TUNER_TDA8290=m
CONFIG_TUNER_TEA5761=m
CONFIG_TUNER_TEA5767=m
CONFIG_TUNER_SIMPLE=m
CONFIG_TUNER_TDA9887=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_PASSWORDS is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set

#
# MMC/SD Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
# CONFIG_LEDS_CLEVO_MAIL is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# Conflicting RTC option has been selected, check GEN_RTC and RTC
#

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set

#
# Layered filesystems
#
# CONFIG_ECRYPT_FS is not set
# CONFIG_UNION_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_PROFILE_LIKELY is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_586 is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_VIRTUALIZATION=y
CONFIG_LGUEST=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage
  2007-12-26  8:25     ` Valdis.Kletnieks
@ 2007-12-26  8:52       ` James Morris
  2007-12-26 14:16         ` James Morris
  2007-12-26 16:44         ` 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage Valdis.Kletnieks
  0 siblings, 2 replies; 146+ messages in thread
From: James Morris @ 2007-12-26  8:52 UTC (permalink / raw)
  To: Valdis.Kletnieks; +Cc: Andrew Morton, Paul Moore, linux-kernel

On Wed, 26 Dec 2007, Valdis.Kletnieks@vt.edu wrote:

> On Wed, 26 Dec 2007 18:34:26 +1100, James Morris said:
> 
> > Can you post your .config ?
> 
> The gzip'ed config as of when I quit bisecting is attached.  It's probably
> not directly usable unless you have a quilt tree that's positioned fairly
> close to git-lblnet.patch.

What does the following say ?

# sestatus  && rpm -q selinux-policy

Do you see anything unusual in the audit log or syslog?

Try

# ausearch -hn 127.0.0.1

and

# ausearch -x tcltest



- James
-- 
James Morris
<jmorris@namei.org>

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: some section mismatches on sparc64
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (6 preceding siblings ...)
  2007-12-26  8:37 ` 2.6.24-rc6-mm1 Dave Young
@ 2007-12-26 12:29 ` Mariusz Kozlowski
  2007-12-27  3:05   ` David Miller
  2007-12-27  2:21 ` 2.6.24-rc6-mm1: __raw_spin_is_contended undefined Joseph Fannin
                   ` (12 subsequent siblings)
  20 siblings, 1 reply; 146+ messages in thread
From: Mariusz Kozlowski @ 2007-12-26 12:29 UTC (permalink / raw)
  To: Andrew Morton, David Miller; +Cc: linux-kernel, sparclinux

Hello,

WARNING: vmlinux.o(.text+0x46b04): Section mismatch: reference to .init.text:sun4v_ktsb_register (between 'smp_callin' and 'smp_fill_in_sib_core_maps')
WARNING: vmlinux.o(.text+0x4756c): Section mismatch: reference to .init.text:sun4v_register_mondo_queues (between 'after_lock_tlb' and 'hv_cpu_startup')
WARNING: vmlinux.o(.text+0x477ac): Section mismatch: reference to .init.text:sun4v_register_mondo_queues (between 'hv_cpu_startup' and 'sys32_exit')
WARNING: vmlinux.o(.text+0x55258): Section mismatch: reference to .init.text:__alloc_bootmem (between 'kernel_map_range' and 'kernel_map_pages')
WARNING: vmlinux.o(.text+0x55278): Section mismatch: reference to .init.text:__alloc_bootmem (between 'kernel_map_range' and 'kernel_map_pages')
WARNING: vmlinux.o(.text+0x1fdfe4): Section mismatch: reference to .init.text:sunserial_console_match (between 'hv_probe' and 'serial_in')
WARNING: vmlinux.o(.text+0x20011c): Section mismatch: reference to .init.text:sunserial_console_match (between 'su_probe' and 'sunsu_console_putchar')
WARNING: vmlinux.o(.sun4v_2insn_patch+0x3d8): Section mismatch: reference to .init.text:
WARNING: vmlinux.o(__ksymtab+0x62c0): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors')

Regards,

	Mariusz

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage
  2007-12-26  8:52       ` James Morris
@ 2007-12-26 14:16         ` James Morris
  2007-12-26 22:46           ` Andrew Morton
  2007-12-26 16:44         ` 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage Valdis.Kletnieks
  1 sibling, 1 reply; 146+ messages in thread
From: James Morris @ 2007-12-26 14:16 UTC (permalink / raw)
  To: Valdis.Kletnieks; +Cc: Andrew Morton, Paul Moore, linux-kernel, Stephen Smalley

On Wed, 26 Dec 2007, James Morris wrote:

> What does the following say ?
> 
> # sestatus  && rpm -q selinux-policy

Don't worry about that -- I reproduced it with Paul Moore's git tree:
git://git.infradead.org/users/pcmoore/lblnet-2.6_testing

(under current -mm, the e1000 driver doesn't find my ethernet card & the 
tcl tests won't run without an external interface).

The offending commit is when SELinux is converted to the new ifindex 
interface:

  9c6ad8f6895db7a517c04c2147cb5e7ffb83a315 is first bad commit
  commit 9c6ad8f6895db7a517c04c2147cb5e7ffb83a315
  Author: Paul Moore <paul.moore@hp.com>
  Date:   Fri Dec 21 11:44:26 2007 -0500

      SELinux: Convert the netif code to use ifindex values

      [...]

In some case (not yet fully identified -- also happens when avahi starts 
up, although seemingly silently & without obvious issues), SELinux is 
passed an ifindex of 1515870810, which corresponds to 0x5a5a5a5a, the slab 
poison value, suggesting a race in the calling code where we're being 
asked to check an skb which has been freed.

The SELinux code is erroring out before performing an access check 
(perhaps there should be WARN_ON, at least), so this will affect both 
permissive and enforcing mode without generating any log messages.

Andrew: I suggest dropping the patchset from -mm until Paul gets back from 
vacation.


- James
-- 
James Morris
<jmorris@namei.org>

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage
  2007-12-26  8:52       ` James Morris
  2007-12-26 14:16         ` James Morris
@ 2007-12-26 16:44         ` Valdis.Kletnieks
  1 sibling, 0 replies; 146+ messages in thread
From: Valdis.Kletnieks @ 2007-12-26 16:44 UTC (permalink / raw)
  To: James Morris; +Cc: Andrew Morton, Paul Moore, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 570 bytes --]

On Wed, 26 Dec 2007 19:52:56 +1100, James Morris said:
> On Wed, 26 Dec 2007, Valdis.Kletnieks@vt.edu wrote:
> 
> > On Wed, 26 Dec 2007 18:34:26 +1100, James Morris said:
> > 
> > > Can you post your .config ?
> > 
> > The gzip'ed config as of when I quit bisecting is attached.  It's probably
> > not directly usable unless you have a quilt tree that's positioned fairly
> > close to git-lblnet.patch.
> 
> What does the following say ?
> 
> # sestatus  && rpm -q selinux-policy

I'm running MLS in permissive mode, so there shouldn't be any SElinux
denials happening.

[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage
  2007-12-26 14:16         ` James Morris
@ 2007-12-26 22:46           ` Andrew Morton
  2007-12-26 23:39             ` 2.6.24-rc6-mm1 - e1000 breakage James Morris
  0 siblings, 1 reply; 146+ messages in thread
From: Andrew Morton @ 2007-12-26 22:46 UTC (permalink / raw)
  To: James Morris; +Cc: Valdis.Kletnieks, Paul Moore, linux-kernel, Stephen Smalley

On Thu, 27 Dec 2007 01:16:25 +1100 (EST) James Morris <jmorris@namei.org> wrote:

> On Wed, 26 Dec 2007, James Morris wrote:
> 
> > What does the following say ?
> > 
> > # sestatus  && rpm -q selinux-policy
> 
> Don't worry about that -- I reproduced it with Paul Moore's git tree:
> git://git.infradead.org/users/pcmoore/lblnet-2.6_testing
> 
> (under current -mm, the e1000 driver doesn't find my ethernet card & the 
> tcl tests won't run without an external interface).

You might need to enable CONFIG_E1000E.

> The offending commit is when SELinux is converted to the new ifindex 
> interface:
> 
>   9c6ad8f6895db7a517c04c2147cb5e7ffb83a315 is first bad commit
>   commit 9c6ad8f6895db7a517c04c2147cb5e7ffb83a315
>   Author: Paul Moore <paul.moore@hp.com>
>   Date:   Fri Dec 21 11:44:26 2007 -0500
> 
>       SELinux: Convert the netif code to use ifindex values
> 
>       [...]
> 
> In some case (not yet fully identified -- also happens when avahi starts 
> up, although seemingly silently & without obvious issues), SELinux is 
> passed an ifindex of 1515870810, which corresponds to 0x5a5a5a5a, the slab 
> poison value, suggesting a race in the calling code where we're being 
> asked to check an skb which has been freed.
> 
> The SELinux code is erroring out before performing an access check 
> (perhaps there should be WARN_ON, at least), so this will affect both 
> permissive and enforcing mode without generating any log messages.
> 
> Andrew: I suggest dropping the patchset from -mm until Paul gets back from 
> vacation.

OK, thanks.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 - e1000 breakage
  2007-12-26 22:46           ` Andrew Morton
@ 2007-12-26 23:39             ` James Morris
  0 siblings, 0 replies; 146+ messages in thread
From: James Morris @ 2007-12-26 23:39 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

On Wed, 26 Dec 2007, Andrew Morton wrote:

> > (under current -mm, the e1000 driver doesn't find my ethernet card & the 
> > tcl tests won't run without an external interface).
> 
> You might need to enable CONFIG_E1000E.

Indeed, it works for me.



- James 
-- 
James Morris 
<jmorris@namei.org>

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: __raw_spin_is_contended undefined
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (7 preceding siblings ...)
  2007-12-26 12:29 ` 2.6.24-rc6-mm1: some section mismatches on sparc64 Mariusz Kozlowski
@ 2007-12-27  2:21 ` Joseph Fannin
  2007-12-27  5:21   ` Nick Piggin
  2007-12-27  6:04 ` 2.6.24-rc6-mm1 - drivers/char/tpm/tpm_bios.c oddness? Valdis.Kletnieks
                   ` (11 subsequent siblings)
  20 siblings, 1 reply; 146+ messages in thread
From: Joseph Fannin @ 2007-12-27  2:21 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, Nick Piggin, Ingo Molnar, Thomas Gleixner

On Sat, Dec 22, 2007 at 11:30:56PM -0800, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
>

This doesn't build on powerpc with my .config:

In file included from arch/powerpc/kernel/asm-offsets.c:17:
include/linux/sched.h: In function ‘spin_needbreak’:
include/linux/sched.h:1947: error: implicit declaration of function ‘__raw_spin_is_contended’

I don't see where __raw_spin_is_contended is defined for any arch
other than x86, so I guess this will happen on any non-x86 arch when
SMP=y and PREEMPT=y are set?

This comes from "spinlock: lockbreak cleanup" in git-x86.

--
Joseph Fannin
jfannin@gmail.com

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: some section mismatches on sparc64
  2007-12-26 12:29 ` 2.6.24-rc6-mm1: some section mismatches on sparc64 Mariusz Kozlowski
@ 2007-12-27  3:05   ` David Miller
  2007-12-28 23:22     ` Adrian Bunk
  0 siblings, 1 reply; 146+ messages in thread
From: David Miller @ 2007-12-27  3:05 UTC (permalink / raw)
  To: m.kozlowski; +Cc: akpm, linux-kernel, sparclinux

From: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Date: Wed, 26 Dec 2007 13:29:07 +0100

> WARNING: vmlinux.o(.text+0x46b04): Section mismatch: reference to .init.text:sun4v_ktsb_register (between 'smp_callin' and 'smp_fill_in_sib_core_maps')

Well known and I see them every build and so does everyone
else on sparc64.

They are harmless and as time allows I try to find ways
to get rid of them but it's very low priority.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: __raw_spin_is_contended undefined
  2007-12-27  2:21 ` 2.6.24-rc6-mm1: __raw_spin_is_contended undefined Joseph Fannin
@ 2007-12-27  5:21   ` Nick Piggin
  0 siblings, 0 replies; 146+ messages in thread
From: Nick Piggin @ 2007-12-27  5:21 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner

On Wed, Dec 26, 2007 at 09:21:58PM -0500, Joseph Fannin wrote:
> On Sat, Dec 22, 2007 at 11:30:56PM -0800, Andrew Morton wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> >
> 
> This doesn't build on powerpc with my .config:
> 
> In file included from arch/powerpc/kernel/asm-offsets.c:17:
> include/linux/sched.h: In function ???spin_needbreak???:
> include/linux/sched.h:1947: error: implicit declaration of function ???__raw_spin_is_contended???
> 
> I don't see where __raw_spin_is_contended is defined for any arch
> other than x86, so I guess this will happen on any non-x86 arch when
> SMP=y and PREEMPT=y are set?

And CONFIG_GENERIC_LOCKBREAK is not defined, which is what powerpc needs.

Thanks for reporting,
Nick

---

Index: linux-2.6/arch/powerpc/Kconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/Kconfig
+++ linux-2.6/arch/powerpc/Kconfig
@@ -53,6 +53,11 @@ config RWSEM_XCHGADD_ALGORITHM
 	bool
 	default y
 
+config GENERIC_LOCKBREAK
+	bool
+	default y
+	depends on SMP && PREEMPT
+
 config ARCH_HAS_ILOG2_U32
 	bool
 	default y

^ permalink raw reply	[flat|nested] 146+ messages in thread

* 2.6.24-rc6-mm1 - drivers/char/tpm/tpm_bios.c oddness?
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (8 preceding siblings ...)
  2007-12-27  2:21 ` 2.6.24-rc6-mm1: __raw_spin_is_contended undefined Joseph Fannin
@ 2007-12-27  6:04 ` Valdis.Kletnieks
  2007-12-27  8:49 ` 2.6.24-rc6-mm1 Kernel panics at different functions () Kamalesh Babulal
                   ` (10 subsequent siblings)
  20 siblings, 0 replies; 146+ messages in thread
From: Valdis.Kletnieks @ 2007-12-27  6:04 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, tpmdd-devel

[-- Attachment #1: Type: text/plain, Size: 2105 bytes --]

On Sat, 22 Dec 2007 23:30:56 PST, Andrew Morton said:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/

Looks like an uninitialized variable dereference for SEPARATOR events:

# mount -t securityfs none /sys/kernel/security/
# ls /sys/kernel/security/
tpm0
# l /sys/kernel/security/tpm0/
total 0
0 -r--r----- 1 root root 0 2007-12-26 23:28 ascii_bios_measurements
0 -r--r----- 1 root root 0 2007-12-26 23:28 binary_bios_measurements
# cat /sys/kernel/security/tpm0/ascii_bios_measurements 
 0 0000000000000000000000000000000000000000 07 [S-CRTM Contents]
 0 0000000000000000000000000000000000000000 07 [S-CRTM Contents]
 0 0000000000000000000000000000000000000000 07 [S-CRTM Contents]
 0 0000000000000000000000000000000000000000 07 [S-CRTM Contents]
 4 c1e25c3f6b0dc78d57296aa2870ca6f782ccf80f 05 [Calling INT 19h]
 0 85e53271e14006f0265921d02d4d736cdc580b0b 04 [ÿ]
 1 85e53271e14006f0265921d02d4d736cdc580b0b 04 [ÿ]
 2 85e53271e14006f0265921d02d4d736cdc580b0b 04 [ÿ]
 3 85e53271e14006f0265921d02d4d736cdc580b0b 04 [ÿ]
 4 85e53271e14006f0265921d02d4d736cdc580b0b 04 [ÿ]
 5 85e53271e14006f0265921d02d4d736cdc580b0b 04 [ÿ]
 6 85e53271e14006f0265921d02d4d736cdc580b0b 04 [ÿ]
 7 85e53271e14006f0265921d02d4d736cdc580b0b 04 [ÿ]
 4 38f30a0a967fcf2bfee1e3b2971de540115048c8 05 [Returned INT 19h]
 4 f9d3a33e4ba6109fb60e8df6ec0f10330733c8b2 0c [Compact Hash]
 5 9bd5c812613f67ce1c75d0ea48b9933a547683cb 0c [Compact Hash]

Looks like the problem is likely in get_event_name:

        case NONHOST_INFO:
                name = tcpa_event_type_strings[event->event_type];
                n_len = strlen(name);
                break;
        case SEPARATOR:
        case ACTION:
                if (MAX_TEXT_EVENT > event->event_size) {
                        name = event_entry;
                        n_len = event->event_size;
                }
                break;

Should there be a 'break;' after the SEPARATOR line?  Given the name, it
probably doesn't have a name/length pair attached to an event, right?



[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 Kernel panics at different functions ()
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (9 preceding siblings ...)
  2007-12-27  6:04 ` 2.6.24-rc6-mm1 - drivers/char/tpm/tpm_bios.c oddness? Valdis.Kletnieks
@ 2007-12-27  8:49 ` Kamalesh Babulal
  2007-12-27  9:54   ` Andrew Morton
  2007-12-27  9:16 ` 2.6.24-rc6-mm1 - power_supply driver dmesg weirdness? Valdis.Kletnieks
                   ` (9 subsequent siblings)
  20 siblings, 1 reply; 146+ messages in thread
From: Kamalesh Babulal @ 2007-12-27  8:49 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-kernel, Ingo Molnar, Andy Whitcroft, Balbir Singh,
	Srivatsa Vaddagiri, Dhaval Giani

Hi Andrew,

The 2.6.24-rc6-mm1 kernel with hotfix x86-fix-system-gate-related-crash.patch applied
panics while booting on a x86_64 box

Unable to handle kernel NULL pointer dereference at 0000000000000046 RIP: 
 [<ffffffff80369a0b>] rb_erase+0xe7/0x2a3
PGD 17ff65067 PUD 17f1c7067 PMD 0 
Oops: 0000 [1] SMP 
last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:02:04.0/host0/target0:0:6/0:0:6:0/type
CPU 0 
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.24-rc6-mm1-autokern1 #1
RIP: 0010:[<ffffffff80369a0b>]  [<ffffffff80369a0b>] rb_erase+0xe7/0x2a3
RSP: 0000:ffffffff80650e00  EFLAGS: 00010002
RAX: ffff8101fe9568c8 RBX: ffff8100010062a8 RCX: ffff8101fe9568b0
RDX: ffff8101fe9568c8 RSI: 0000000000000046 RDI: 0000000000000000
RBP: ffffffff80650e10 R08: ffff8101fe9568c8 R09: 0000000000000086
R10: 0000000000000000 R11: 00000000000001e8 R12: ffff8100010062b8
R13: 0000000000000002 R14: ffff810001006260 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffffffff805dc000(0000) knlGS:00000000f31ffbb0
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000046 CR3: 000000017f0ab000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffffffff805f6000, task ffffffff805a2080)
Stack:  ffff8100010062a8 ffff8101fe9568b0 ffffffff80650e40 ffffffff8024be16
 ffffffff80369d65 ffffffff80369d65 ffff8101fe9568b0 ffff8100010062a8
 ffffffff80650eb0 ffffffff8024c1d5 ffffffffb88cc28e 0000000006e73eff
Call Trace:
 <IRQ>  [<ffffffff8024be16>] __remove_hrtimer+0x2e/0x3c
 [<ffffffff80369d65>] __down_read_trylock+0x16/0x42
 [<ffffffff80369d65>] __down_read_trylock+0x16/0x42
 [<ffffffff8024c1d5>] hrtimer_run_queues+0x130/0x191
 [<ffffffff8023fd09>] run_timer_softirq+0x28/0x1a7
 [<ffffffff8023c018>] __do_softirq+0x55/0xc2
 [<ffffffff8020c73c>] call_softirq+0x1c/0x28
 [<ffffffff8020e719>] do_softirq+0x32/0x9d
 [<ffffffff8023c0dd>] irq_exit+0x3f/0x41
 [<ffffffff8021ff85>] smp_apic_timer_interrupt+0x92/0xa7
 [<ffffffff8020c1e6>] apic_timer_interrupt+0x66/0x70
 <EOI>  [<ffffffff802095f5>] default_idle+0x36/0x5e
 [<ffffffff802095f0>] default_idle+0x31/0x5e
 [<ffffffff802095bf>] default_idle+0x0/0x5e
 [<ffffffff802096b6>] cpu_idle+0x90/0xb2
 [<ffffffff804b0126>] rest_init+0x5a/0x5c
 [<ffffffff806017ee>] start_kernel+0x2b8/0x2c4
 [<ffffffff8060112b>] _sinittext+0x12b/0x132


Code: 48 8b 06 83 e0 03 4c 09 c0 48 89 06 4d 85 c0 74 12 49 39 48 
RIP  [<ffffffff80369a0b>] rb_erase+0xe7/0x2a3
 RSP <ffffffff80650e00>
CR2: 0000000000000046

The gdb for the above panic

(gdb) l *0xffffffff80369a0b
0xffffffff80369a0b is in rb_erase (include/linux/rbtree.h:125).
120     #define rb_set_red(r)  do { (r)->rb_parent_color &= ~1; } while (0)
121     #define rb_set_black(r)  do { (r)->rb_parent_color |= 1; } while (0)
122
123     static inline void rb_set_parent(struct rb_node *rb, struct rb_node *p)
124     {
125             rb->rb_parent_color = (rb->rb_parent_color & 3) | (unsigned long)p;
126     }
127     static inline void rb_set_color(struct rb_node *rb, int color)
128     {
129             rb->rb_parent_color = (rb->rb_parent_color & ~1) | color;


And when i tried rebooting again, i got the following traces one after the another
continuous in the second boot up 

Unable to handle kernel paging request at 000000000000407f RIP: 
 [<ffffffff804b2bd3>] _spin_lock_irqsave+0xc/0x1d
PGD 1ff102067 PUD ffff8101fe6e4000 
Oops: 0002 [1] SMP 
last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:02:04.0/host0/target0:0:6/0:0:6:0/type
CPU 3 
Modules linked in:
Pid: 16511, comm: ,@ Tainted: G   M    2.6.24-rc6-mm1-autokern1 #1
RIP: 0010:[<ffffffff804b2bd3>]  [<ffffffff804b2bd3>] _spin_lock_irqsave+0xc/0x1d
RSP: 0000:ffff8101fe6e4178  EFLAGS: 00010046
RAX: 0000000000000046 RBX: 000000000000407b RCX: 0000000000000001
RDX: 0000000000000100 RSI: 0000000000000002 RDI: 000000000000407f
RBP: ffff8101fe6e4178 R08: 0000000000000001 R09: ffff8101fe6e43e0
R10: 0000000000000000 R11: 0000000000000008 R12: 0000000000000000
R13: 0000000000000002 R14: ffff8101fe6e4000 R15: ffff8101fe6e4298
FS:  0000000000000000(0000) GS:ffff8101fff13000(0063) knlGS:00000000f7d4a080
CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
CR2: 000000000000407f CR3: 00000001ff1f2000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process ,@ (pid: 16511, threadinfo 00000000ffffffff, task ffff8101fe6e4000)
Stack:  ffff8101fe6e4198 ffffffff80369d65 000000000000407b 000000000000407f
 ffff8101fe6e41a8 ffffffff8024c599 ffff8101fe6e4288 ffffffff8022473a
 0000000000000000 0000000000000000 0000000000000000 000000000000401b
Call Trace:


Code: f0 66 0f c1 17 38 f2 74 06 f3 90 8a 17 eb f6 c9 c3 55 48 89 
RIP  [<ffffffff804b2bd3>] _spin_lock_irqsave+0xc/0x1d
 RSP <ffff8101fe6e4178>
CR2: 000000000000407f

0xffffffff804b2bd3 is in _spin_lock_irqsave (include/asm/spinlock.h:75).
70               * and should be optimal for the uncontended case. Note the tail must
71               * be in the high byte, otherwise the 16-bit wide increment of the low
72               * byte would carry up and contaminate the high byte.
73               */
74
75              __asm__ __volatile__ (
76                      LOCK_PREFIX "xaddw %w0, %1\n"
77                      "1:\t"
78                      "cmpb %h0, %b0\n\t"
79                      "je 2f\n\t"

PGD 0 
Oops: 0000 [3] SMP 
last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:02:04.0/host0/target0:0:6/0:0:6:0/type
CPU 2 
Modules linked in:
Pid: 0, comm: swapper Tainted: G   M  D 2.6.24-rc6-mm1-autokern1 #1
RIP: 0010:[<ffffffff80369c2b>]  [<ffffffff80369c2b>] rb_next+0x1e/0x4f
RSP: 0000:ffff81017ff3be10  EFLAGS: 00010002
RAX: 0000000000000002 RBX: ffff8101000332a8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8101000332a8 RDI: 0000000000000002
RBP: ffff81017ff3be10 R08: 00000000000001e8 R09: 0000000000000086
R10: 0000000000000001 R11: 00000000000001e8 R12: ffff8101fe71dec8
R13: 0000000000000002 R14: ffff810100033260 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff81017ff0e000(0000) knlGS:00000000f7ea3b80
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000012 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffff8100e3b4a000, task ffff81007ff6c000)
Stack:  ffff81017ff3be40 ffffffff8024be06 000000008020bb29 000000008020bb29
 ffff8101fe71dec8 ffff8101000332a8 ffff81017ff3beb0 ffffffff8024c1d5
 ffffffffb88cc1cc 000000000848661b ffffffffb88cc1cc 000000000848661b
Call Trace:
 <IRQ>  [<ffffffff8024be06>] __remove_hrtimer+0x1e/0x3c
 [<ffffffff8024c1d5>] hrtimer_run_queues+0x130/0x191
 [<ffffffff8023fd09>] run_timer_softirq+0x28/0x1a7
 [<ffffffff8023c018>] __do_softirq+0x55/0xc2
 [<ffffffff8020c73c>] call_softirq+0x1c/0x28
 [<ffffffff8020e719>] do_softirq+0x32/0x9d
 [<ffffffff8023c0dd>] irq_exit+0x3f/0x41
 [<ffffffff8021ff85>] smp_apic_timer_interrupt+0x92/0xa7
 [<ffffffff8020c1e6>] apic_timer_interrupt+0x66/0x70
 <EOI>  [<ffffffff802095f5>] default_idle+0x36/0x5e
 [<ffffffff802095f0>] default_idle+0x31/0x5e
 [<ffffffff802095bf>] default_idle+0x0/0x5e
 [<ffffffff802096b6>] cpu_idle+0x90/0xb2
 [<ffffffff8021f0c1>] start_secondary+0x3ad/0x3b9


Code: 48 83 7f 10 00 74 06 48 8b 7f 10 eb f3 48 89 f8 eb 1d 48 89 
RIP  [<ffffffff80369c2b>] rb_next+0x1e/0x4f
 RSP <ffff81017ff3be10>
CR2: 0000000000000012


0xffffffff80369c2b is in rb_next (lib/rbtree.c:333).
328             /* If we have a right-hand child, go down and then left as far
329                as we can. */
330             if (node->rb_right) {
331                     node = node->rb_right; 
332                     while (node->rb_left)
333                             node=node->rb_left;
334                     return node;
335             }
336
337             /* No right-hand children.  Everything down and left is

Unable to handle kernel paging request at 000000008020bb81 RIP: 
 [<ffffffff80242abd>] exit_signals+0x27/0x10a
PGD 1ff102067 PUD 0 
Oops: 0000 [5] SMP 
last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:02:04.0/host0/target0:0:6/0:0:6:0/type
CPU 3 
Modules linked in:
Pid: 16511, comm: ,@ Tainted: G   M  D 2.6.24-rc6-mm1-autokern1 #1
RIP: 0010:[<ffffffff80242abd>]  [<ffffffff80242abd>] exit_signals+0x27/0x10a
RSP: 0000:ffff8101fe6e3cf8  EFLAGS: 00010003
RAX: 000000008020bb29 RBX: 0000000000000046 RCX: 00000000ffffffff
RDX: ffff8101fe6e4000 RSI: 0000000000000000 RDI: ffff8101fe6e4000
RBP: ffff8101fe6e3d18 R08: 0000000000000000 R09: ffffffff80662540
R10: ffffffff80662540 R11: ffff810004ab9740 R12: ffff8101fe6e4000
R13: 0000000000000000 R14: ffff8101fe6e4000 R15: ffff8101fe6e3e88
FS:  0000000000000000(0000) GS:ffff8101fff13000(0063) knlGS:00000000f7d4a080
CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
CR2: 000000008020bb81 CR3: 00000001ff1f2000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process ,@ (pid: 16511, threadinfo 00000000ffffffff, task ffff8101fe6e4000)
Stack:  ffff8101fe6e4000 0000000000000046 ffff8101fe6e4000 0000000000000009
 ffff8101fe6e3d68 ffffffff80239b8c ffff8101fe6e3d48 ffffffff803c241d
 0000000000000046 0000000000000046 ffff8101fe6e3e88 0000000000000009
Call Trace:


Code: f6 40 58 08 75 07 48 83 78 48 00 74 0b 41 83 4c 24 14 04 e9 
RIP  [<ffffffff80242abd>] exit_signals+0x27/0x10a
 RSP <ffff8101fe6e3cf8>
CR2: 000000008020bb81

0xffffffff80242abd is in exit_signals (include/linux/sched.h:555).
550     #define SIGNAL_GROUP_EXIT       0x00000008 /* group exit in progress */
551
552     /* If true, all threads except ->group_exit_task have pending SIGKILL */
553     static inline int signal_group_exit(const struct signal_struct *sig)
554     {
555             return  (sig->flags & SIGNAL_GROUP_EXIT) ||
556                     (sig->group_exit_task != NULL);
557     }
558
559     /*

 
-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* 2.6.24-rc6-mm1 - power_supply driver dmesg weirdness?
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (10 preceding siblings ...)
  2007-12-27  8:49 ` 2.6.24-rc6-mm1 Kernel panics at different functions () Kamalesh Babulal
@ 2007-12-27  9:16 ` Valdis.Kletnieks
  2007-12-27 17:54 ` 2.6.24-rc6-mm1 - crash in tick_sched_timer/update_process_times Valdis.Kletnieks
                   ` (8 subsequent siblings)
  20 siblings, 0 replies; 146+ messages in thread
From: Valdis.Kletnieks @ 2007-12-27  9:16 UTC (permalink / raw)
  To: Andrew Morton, cbou, dwmw2; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1953 bytes --]

On Sat, 22 Dec 2007 23:30:56 PST, Andrew Morton said:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/

Happened to be looking more closely than usual at my dmesg looking for something
else, and spotted this:

[    6.079043] power_supply BAT0: 11 dynamic props
[    6.079045] power_supply BAT0: prop STATUS=Full
[    6.079047] power_supply BAT0: prop PRESENT=1
[    6.079049] power_supply BAT0: prop TECHNOLOGY=Li-ion
[    6.079052] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=11100000
[    6.079054] power_supply BAT0: prop VOLTAGE_NOW=11793000
[    6.079056] power_supply BAT0: prop CURRENT_NOW=1000
[    6.079058] power_supply BAT0: prop CHARGE_FULL_DESIGN=7800000
[    6.079061] power_supply BAT0: prop CHARGE_FULL=3110000
[    6.079063] power_supply BAT0: prop CHARGE_NOW=7800000
[    6.079065] power_supply BAT0: prop TIME_TO_FULL_AVG=DELL FF2316
[    6.079067] power_supply BAT0: prop MODEL_NAME=Sanyo
[    6.079301] ACPI: SSDT 7FE82138, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
[    6.079488] ACPI: SSDT 7FE81EED, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)

What's with that TIME_TO_FULL_AVG value?  Is the battery on crack, or my BIOS,
or the driver?  I expected time units, not a Dell part number ;) (Yes, I know
CHARGE_FULL is low, the battery is pretty beat, and  Latitudes seem to always
report CHARGE_NOW as "design full" when running off the AC power brick)

(For the record, dmidecode says:

Handle 0x1600, DMI type 22, 26 bytes
Portable Battery
        Location: Sys. Battery Bay
        Manufacturer: Sanyo           
        Name: DELL FF2316A    
        Design Capacity: 78000 mWh
        Design Voltage: 11100 mV
        SBDS Version: 1.0
        Maximum Error: 0%
        SBDS Serial Number: 0355
        SBDS Manufacture Date: 2006-10-26
        SBDS Chemistry: LION            
        OEM-specific Information: 0x00000001

So it even managed to lose the trailing 'A'.. ;)

[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 Kernel panics at different functions ()
  2007-12-27  8:49 ` 2.6.24-rc6-mm1 Kernel panics at different functions () Kamalesh Babulal
@ 2007-12-27  9:54   ` Andrew Morton
  2007-12-27 10:25     ` Kamalesh Babulal
  2007-12-28  9:11     ` Kamalesh Babulal
  0 siblings, 2 replies; 146+ messages in thread
From: Andrew Morton @ 2007-12-27  9:54 UTC (permalink / raw)
  To: Kamalesh Babulal
  Cc: linux-kernel, Ingo Molnar, Andy Whitcroft, Balbir Singh,
	Srivatsa Vaddagiri, Dhaval Giani

On Thu, 27 Dec 2007 14:19:54 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:

> Hi Andrew,
> 
> The 2.6.24-rc6-mm1 kernel with hotfix x86-fix-system-gate-related-crash.patch applied
> panics while booting on a x86_64 box
> 
> Unable to handle kernel NULL pointer dereference at 0000000000000046 RIP: 
>  [<ffffffff80369a0b>] rb_erase+0xe7/0x2a3
> PGD 17ff65067 PUD 17f1c7067 PMD 0 
> Oops: 0000 [1] SMP 
> last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:02:04.0/host0/target0:0:6/0:0:6:0/type
> CPU 0 
> Modules linked in:
> Pid: 0, comm: swapper Not tainted 2.6.24-rc6-mm1-autokern1 #1
> RIP: 0010:[<ffffffff80369a0b>]  [<ffffffff80369a0b>] rb_erase+0xe7/0x2a3
> RSP: 0000:ffffffff80650e00  EFLAGS: 00010002
> RAX: ffff8101fe9568c8 RBX: ffff8100010062a8 RCX: ffff8101fe9568b0
> RDX: ffff8101fe9568c8 RSI: 0000000000000046 RDI: 0000000000000000
> RBP: ffffffff80650e10 R08: ffff8101fe9568c8 R09: 0000000000000086
> R10: 0000000000000000 R11: 00000000000001e8 R12: ffff8100010062b8
> R13: 0000000000000002 R14: ffff810001006260 R15: 0000000000000001
> FS:  0000000000000000(0000) GS:ffffffff805dc000(0000) knlGS:00000000f31ffbb0
> CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000046 CR3: 000000017f0ab000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 0, threadinfo ffffffff805f6000, task ffffffff805a2080)
> Stack:  ffff8100010062a8 ffff8101fe9568b0 ffffffff80650e40 ffffffff8024be16
>  ffffffff80369d65 ffffffff80369d65 ffff8101fe9568b0 ffff8100010062a8
>  ffffffff80650eb0 ffffffff8024c1d5 ffffffffb88cc28e 0000000006e73eff
> Call Trace:
>  <IRQ>  [<ffffffff8024be16>] __remove_hrtimer+0x2e/0x3c
>  [<ffffffff80369d65>] __down_read_trylock+0x16/0x42
>  [<ffffffff80369d65>] __down_read_trylock+0x16/0x42
>  [<ffffffff8024c1d5>] hrtimer_run_queues+0x130/0x191
>  [<ffffffff8023fd09>] run_timer_softirq+0x28/0x1a7
>  [<ffffffff8023c018>] __do_softirq+0x55/0xc2
>  [<ffffffff8020c73c>] call_softirq+0x1c/0x28
>  [<ffffffff8020e719>] do_softirq+0x32/0x9d
>  [<ffffffff8023c0dd>] irq_exit+0x3f/0x41
>  [<ffffffff8021ff85>] smp_apic_timer_interrupt+0x92/0xa7
>  [<ffffffff8020c1e6>] apic_timer_interrupt+0x66/0x70
>  <EOI>  [<ffffffff802095f5>] default_idle+0x36/0x5e
>  [<ffffffff802095f0>] default_idle+0x31/0x5e
>  [<ffffffff802095bf>] default_idle+0x0/0x5e
>  [<ffffffff802096b6>] cpu_idle+0x90/0xb2
>  [<ffffffff804b0126>] rest_init+0x5a/0x5c
>  [<ffffffff806017ee>] start_kernel+0x2b8/0x2c4
>  [<ffffffff8060112b>] _sinittext+0x12b/0x132
> 
> 

It does seem to be mostly hrtimer-related.  But surely the hrtimer system
is initialised by the time tis happens.

The usual refrain: is it possible to run a bisection search?

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 Kernel panics at different functions ()
  2007-12-27  9:54   ` Andrew Morton
@ 2007-12-27 10:25     ` Kamalesh Babulal
  2007-12-28  9:11     ` Kamalesh Babulal
  1 sibling, 0 replies; 146+ messages in thread
From: Kamalesh Babulal @ 2007-12-27 10:25 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-kernel, Ingo Molnar, Andy Whitcroft, Balbir Singh,
	Srivatsa Vaddagiri, Dhaval Giani

Andrew Morton wrote:
> On Thu, 27 Dec 2007 14:19:54 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> 
>> Hi Andrew,
>>
>> The 2.6.24-rc6-mm1 kernel with hotfix x86-fix-system-gate-related-crash.patch applied
>> panics while booting on a x86_64 box
>>
>> Unable to handle kernel NULL pointer dereference at 0000000000000046 RIP: 
>>  [<ffffffff80369a0b>] rb_erase+0xe7/0x2a3
>> PGD 17ff65067 PUD 17f1c7067 PMD 0 
>> Oops: 0000 [1] SMP 
>> last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:02:04.0/host0/target0:0:6/0:0:6:0/type
>> CPU 0 
>> Modules linked in:
>> Pid: 0, comm: swapper Not tainted 2.6.24-rc6-mm1-autokern1 #1
>> RIP: 0010:[<ffffffff80369a0b>]  [<ffffffff80369a0b>] rb_erase+0xe7/0x2a3
>> RSP: 0000:ffffffff80650e00  EFLAGS: 00010002
>> RAX: ffff8101fe9568c8 RBX: ffff8100010062a8 RCX: ffff8101fe9568b0
>> RDX: ffff8101fe9568c8 RSI: 0000000000000046 RDI: 0000000000000000
>> RBP: ffffffff80650e10 R08: ffff8101fe9568c8 R09: 0000000000000086
>> R10: 0000000000000000 R11: 00000000000001e8 R12: ffff8100010062b8
>> R13: 0000000000000002 R14: ffff810001006260 R15: 0000000000000001
>> FS:  0000000000000000(0000) GS:ffffffff805dc000(0000) knlGS:00000000f31ffbb0
>> CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
>> CR2: 0000000000000046 CR3: 000000017f0ab000 CR4: 00000000000006e0
>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>> Process swapper (pid: 0, threadinfo ffffffff805f6000, task ffffffff805a2080)
>> Stack:  ffff8100010062a8 ffff8101fe9568b0 ffffffff80650e40 ffffffff8024be16
>>  ffffffff80369d65 ffffffff80369d65 ffff8101fe9568b0 ffff8100010062a8
>>  ffffffff80650eb0 ffffffff8024c1d5 ffffffffb88cc28e 0000000006e73eff
>> Call Trace:
>>  <IRQ>  [<ffffffff8024be16>] __remove_hrtimer+0x2e/0x3c
>>  [<ffffffff80369d65>] __down_read_trylock+0x16/0x42
>>  [<ffffffff80369d65>] __down_read_trylock+0x16/0x42
>>  [<ffffffff8024c1d5>] hrtimer_run_queues+0x130/0x191
>>  [<ffffffff8023fd09>] run_timer_softirq+0x28/0x1a7
>>  [<ffffffff8023c018>] __do_softirq+0x55/0xc2
>>  [<ffffffff8020c73c>] call_softirq+0x1c/0x28
>>  [<ffffffff8020e719>] do_softirq+0x32/0x9d
>>  [<ffffffff8023c0dd>] irq_exit+0x3f/0x41
>>  [<ffffffff8021ff85>] smp_apic_timer_interrupt+0x92/0xa7
>>  [<ffffffff8020c1e6>] apic_timer_interrupt+0x66/0x70
>>  <EOI>  [<ffffffff802095f5>] default_idle+0x36/0x5e
>>  [<ffffffff802095f0>] default_idle+0x31/0x5e
>>  [<ffffffff802095bf>] default_idle+0x0/0x5e
>>  [<ffffffff802096b6>] cpu_idle+0x90/0xb2
>>  [<ffffffff804b0126>] rest_init+0x5a/0x5c
>>  [<ffffffff806017ee>] start_kernel+0x2b8/0x2c4
>>  [<ffffffff8060112b>] _sinittext+0x12b/0x132
>>
>>
> 
> It does seem to be mostly hrtimer-related.  But surely the hrtimer system
> is initialised by the time tis happens.
> 
> The usual refrain: is it possible to run a bisection search?
I will do the bisect and update.

-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 20:39   ` 2.6.24-rc6-mm1 Andrew Morton
@ 2007-12-27 11:42     ` Torsten Kaiser
  2007-12-27 14:30       ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2007-12-27 11:42 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, Alasdair G Kergon, Greg KH

On Dec 23, 2007 9:39 PM, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> On Sun, 23 Dec 2007 17:27:12 +0100 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
>
> > On Dec 23, 2007 8:30 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> > [snip]
> > > +md-support-external-metadata-for-md-arrays.patch
> > > +md-give-userspace-control-over-removing-failed-devices-when-external-metdata-in-use.patch
> > > +md-allow-a-maximum-extent-to-be-set-for-resyncing.patch
> > > +md-allow-devices-to-be-shared-between-md-arrays.patch
> > > +md-lock-address-when-changing-attributes-of-component-devices.patch
> > > +md-allow-an-md-array-to-appear-with-0-drives-if-it-has-external-metadata.patch
> > >
> > >  RAID updates
> > Should I blame the raid1 changes or the kobject changes?
> >
>
> I don't know.  It could even be that both patch series are OK but when they
> are combined, things fail.

OK, I debugged this some more. It looks like two bugs meshed together.

One new bug: "do_md_run() returned -22"
I can't seem to start my raid anymore.
The following part of md-allow-devices-to-be-shared-between-md-arrays
adds a new check to do_md_run() (drivers/md/md.c) that fails for my system:
@@ -3213,8 +3283,11 @@ static int do_md_run(mddev_t * mddev)
        /*
         * Analyze all RAID superblock(s)
         */
-       if (!mddev->raid_disks)
+       if (!mddev->raid_disks) {
+               if (!mddev->persistent)
+                       return -EINVAL;
                analyze_sbs(mddev);
+       }

        chunk_size = mddev->chunk_size;

The raid gets started normally with any other kernel I tried.
I did not investigate the cause of this failure further, because I was
looking why a failure to start a raid was causing event/3 to oops.

This looks like a secound, but rather old bug.
do_md_stop (from drivers/md/md.c) does the following:
  3691                  /* make sure all delayed_delete calls have finished */
  3692                  flush_scheduled_work();
  3693
  3694                  export_array(mddev);
  3695
But: Only the callchain export_array -> kick_rdev_from_array ->
unbind_rdev_from_array schedules the delayed_delete's!

After adding a second flush_scheduled_work() below the export_array()
the resulting kernel no longer oopses and my initrd normally asks for
an alternative root-fs, because of the first bug the raid still does
not get started.

I don't know if this flush_scheduled_work() is misplaced since is was
introduced, or if it really even was only trying to flush delayed
deletes from previously stopped arrays.

When investigation this, I got these debug-outputs:
first try, with my second flush_scheduled_work removed again:
[   34.290576] md: Autodetecting RAID arrays.
[   34.125649] md: Scanned 5 and added 5 devices.
[   34.125649] md: autorun ...
[   34.125649] md: considering sdc2 ...
[   34.125658] md:  adding sdc2 ...
[   34.126914] md:  adding sdb2 ...
[   34.128170] md: sdb1 has different UUID to sdc2
[   34.135654] md:  adding sda2 ...
[   34.137168] md: sda1 has different UUID to sdc2
[   34.145669] md: created md1
[   34.146755] md: bind<sda2>
[   34.147879] md: bind<sdb2>
[   34.155665] md: bind<sdc2>
[   34.156730] md: running: <sdc2><sdb2><sda2>
[   34.158427] mddev not persistent ???
[   34.165651] md: do_md_run() returned -22
[   34.167171] md: md1 stopped.
[   34.168292] 1:flush_scheduled_work()
-> this is the original flush_scheduled_work()-call
[   34.175675] md: unbind<sdc2>
[   34.176795] md: remove sysfs-link 'block', schedule delayed_delete...
following output is from unbind_rdev_from_array:
[   34.185662] XXX:unb:rdev == ffff81011ede4800
<3>XXX:unb:rdev->bdev == ffff81011f86b600
<3>XXX:unb:rdev->kobj == ffff81011ede4860
<6>md: export_rdev(sdc2)
[   34.196600] md: unbind<sdb2>
[   34.197720] md: remove sysfs-link 'block', schedule delayed_delete...
[   34.205654] XXX:unb:rdev == ffff81011ede4600
<3>XXX:unb:rdev->bdev == ffff81011f86b080
<3>XXX:unb:rdev->kobj == ffff81011ede4660
<6>md: export_rdev(sdb2)
[   34.217942] md: unbind<sda2>
[   34.225651] md: remove sysfs-link 'block', schedule delayed_delete...
[   34.228140] XXX:unb:rdev == ffff81011ede4400
<3>XXX:unb:rdev->bdev == ffff81011f86a000
<3>XXX:unb:rdev->kobj == ffff81011ede4460
<6>md: export_rdev(sda2)
[   34.245664] 2:!flush_scheduled_work()
-> my second call is disabled for this run
[   34.247101] md: considering sdb1 ...
[   34.248492] md:  adding sdb1 ...
[   34.255654] md:  adding sda1 ...
following output is from delayed_delete:
[   34.257024] XXX:dd:rdev == ffff81011ede4800
<3>XXX:dd:rdev->kobj == ffff81011ede4860
-> sdc2 seems to get deleted normally
<3>XXX:dd:rdev == ffff81011ede4600
<3>XXX:dd:rdev->kobj == ffff81011ede4660
-> sdb2 too
<3>XXX:dd:rdev == ffff81011ede4400
<3>XXX:dd:rdev->bdev == 5441505645440064
-> but here is something strange, the other devices did not get a
bdev-line, because that value was zero
<6>md: created md0
[   34.654554] md: bind<sda1>
[   34.654554] md: bind<sdb1>
[   34.654554] md: running: <sdb1><sda1>
[   34.654554] mddev not persistent ???
[   34.654554] md: do_md_run() returned -22
[   34.654554] md: md0 stopped.
[   34.654554] 1:flush_scheduled_work()
-> the flush from the second failed raid forces the delayed_deletes
from the first raid to finish
[   34.285652] XXX:dd:rdev->kobj == ffff81011ede4460
-> the pointer itself looks still the same, but the kobject seems to be gone:
<1>Unable to handle kernel paging request at 0000000034333545 RIP:
[   34.288794]  [<ffffffff803b49a1>] kref_put+0x31/0x80
[   34.291688] PGD 7e427067 PUD 7ed22067 PMD 0
[   34.293394] Oops: 0002 [1] SMP
[   34.294651] last sysfs file: /sys/devices/virtual/block/md0/dev
[   34.295649] CPU 3
[   34.295649] Modules linked in:
[   34.295649] Pid: 18, comm: events/3 Not tainted 2.6.24-rc6-mm1 #9
[   34.295649] RIP: 0010:[<ffffffff803b49a1>]  [<ffffffff803b49a1>]
kref_put+0x31/0x80
[   34.295649] RSP: 0000:ffff81007ffe5df0  EFLAGS: 00010202
[   34.295649] RAX: 0000000000000000 RBX: 0000000034333545 RCX: ffffffff80606270
[   34.295649] RDX: 0000000000000040 RSI: ffffffff803b38b0 RDI: 0000000034333545
[   34.295649] RBP: ffff81007ffe5e00 R08: 0000000000000001 R09: 0000000000000000
[   34.295649] R10: ffffffff8094c430 R11: 0000000000000000 R12: ffffffff803b38b0
[   34.295650] R13: ffff81011ede44d8 R14: ffffffff804d7d50 R15: ffff81011ff210f0
[   34.295650] FS:  0000000002024870(0000) GS:ffff81011ff0dd00(0000)
knlGS:0000000000000000
[   34.295650] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[   34.295650] CR2: 0000000034333545 CR3: 000000007e535000 CR4: 00000000000006e0
[   34.295650] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   34.295650] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   34.295650] Process events/3 (pid: 18, threadinfo ffff81007ffe4000,
task ffff81007ffe2000)
[   34.295650] Stack:  ffff81011ede4460 ffff81011ede4400
ffff81007ffe5e10 ffffffff803b37e9
[   34.295650]  ffff81007ffe5e30 ffffffff803b389b ffffffff804d7d50
ffff81011ede4460
[   34.295650]  ffff81007ffe5e50 ffffffff804d7db9 ffff81011ede44e0
ffff81011ff210c0
[   34.295650] Call Trace:
[   34.295650]  [<ffffffff803b37e9>] kobject_put+0x19/0x20
[   34.295650]  [<ffffffff803b389b>] kobject_del+0x2b/0x40
[   34.295650]  [<ffffffff804d7d50>] delayed_delete+0x0/0xb0
[   34.295650]  [<ffffffff804d7db9>] delayed_delete+0x69/0xb0
[   34.295650]  [<ffffffff80249775>] run_workqueue+0x175/0x210
[   34.295650]  [<ffffffff8024a411>] worker_thread+0x71/0xb0
[   34.295650]  [<ffffffff8024d9e0>] autoremove_wake_function+0x0/0x40
[   34.295650]  [<ffffffff8024a3a0>] worker_thread+0x0/0xb0
[   34.295650]  [<ffffffff8024d5fd>] kthread+0x4d/0x80
[   34.295650]  [<ffffffff8020c4b8>] child_rip+0xa/0x12
[   34.295650]  [<ffffffff8020bbcf>] restore_args+0x0/0x30
[   34.295650]  [<ffffffff8024d5b0>] kthread+0x0/0x80
[   34.295650]  [<ffffffff8020c4ae>] child_rip+0x0/0x12
[   34.295650]
[   34.295650]
[   34.295650] Code: f0 ff 0b 0f 94 c0 31 d2 84 c0 74 0b 48 89 df 41
ff d4 ba 01
[   34.295650] RIP  [<ffffffff803b49a1>] kref_put+0x31/0x80
[   34.295650]  RSP <ffff81007ffe5df0>
[   34.295650] CR2: 0000000034333545
[   34.295653] ---[ end trace 60425fedd4d3ef22 ]---
Here the system hangs, the initrd does not prompt for an alternative root-fs

second try with the newly added flush:
[   34.267403] md: Autodetecting RAID arrays.
[   34.188217] md: Scanned 5 and added 5 devices.
[   34.188220] md: autorun ...
[   34.189306] md: considering sdc2 ...
[   34.190699] md:  adding sdc2 ...
[   34.198224] md:  adding sdb2 ...
[   34.199480] md: sdb1 has different UUID to sdc2
[   34.201237] md:  adding sda2 ...
[   34.208220] md: sda1 has different UUID to sdc2
[   34.209993] md: created md1
[   34.218220] md: bind<sda2>
[   34.219341] md: bind<sdb2>
[   34.220410] md: bind<sdc2>
[   34.221476] md: running: <sdc2><sdb2><sda2>
[   34.228963] mddev not persistent ???
[   34.230350] md: do_md_run() returned -22
[   34.238219] md: md1 stopped.
[   34.239339] 1:flush_scheduled_work()
-> old call to flush_scheduled_work()
[   34.240749] md: unbind<sdc2>
[   34.248219] md: remove sysfs-link 'block', schedule delayed_delete...
[   34.250716] XXX:unb:rdev == ffff81011ed6d800
<3>XXX:unb:rdev->bdev == ffff81011f86b600
<3>XXX:unb:rdev->kobj == ffff81011ed6d860
<6>md: export_rdev(sdc2)
[   34.268262] md: unbind<sdb2>
[   34.269382] md: remove sysfs-link 'block', schedule delayed_delete...
[   34.278221] XXX:unb:rdev == ffff81011ed6de00
<3>XXX:unb:rdev->bdev == ffff81011f86b080
<3>XXX:unb:rdev->kobj == ffff81011ed6de60
<6>md: export_rdev(sdb2)
[   34.289123] md: unbind<sda2>
[   34.290244] md: remove sysfs-link 'block', schedule delayed_delete...
[   34.298221] XXX:unb:rdev == ffff81011ed6da00
<3>XXX:unb:rdev->bdev == ffff81011f86a000
<3>XXX:unb:rdev->kobj == ffff81011ed6da60
<6>md: export_rdev(sda2)
[   34.310502] 2:flush_scheduled_work()
-> newly added call to flush_scheduled_work()
[   34.318253] XXX:dd:rdev == ffff81011ed6d800
<3>XXX:dd:rdev->kobj == ffff81011ed6d860
<3>XXX:dd:rdev == ffff81011ed6de00
<3>XXX:dd:rdev->kobj == ffff81011ed6de60
-> this time, rdev->bdev/rdev->kobj from sda2 seem to be still ok.
<3>XXX:dd:rdev == ffff81011ed6da00
<3>XXX:dd:rdev->kobj == ffff81011ed6da60
<6>md: considering sdb1 ...
[   34.339255] md:  adding sdb1 ...
[   34.340511] md:  adding sda1 ...
[   34.348520] md: created md0
[   34.349608] md: bind<sda1>
[   34.350676] md: bind<sdb1>
[   34.351741] md: running: <sdb1><sda1>
[   34.358743] mddev not persistent ???
[   34.360131] md: do_md_run() returned -22
-> same failure to start the second raid, but...
[   34.368219] md: md0 stopped.
[   34.369340] 1:flush_scheduled_work()
-> ... this time the work is already done and no oops happend
[   34.370733] md: unbind<sdb1>
[   34.378219] md: remove sysfs-link 'block', schedule delayed_delete...
[   34.380705] XXX:unb:rdev == ffff81011ed6dc00
<3>XXX:unb:rdev->bdev == ffff81011f86a580
<3>XXX:unb:rdev->kobj == ffff81011ed6dc60
<6>md: export_rdev(sdb1)
[   34.398254] md: unbind<sda1>
[   34.399373] md: remove sysfs-link 'block', schedule delayed_delete...
[   34.408221] XXX:unb:rdev == ffff81007ff51800
<3>XXX:unb:rdev->bdev == ffff81007f8a0580
<3>XXX:unb:rdev->kobj == ffff81007ff51860
<6>md: export_rdev(sda1)
[   34.419120] 2:flush_scheduled_work()
[   34.420510] XXX:dd:rdev == ffff81011ed6dc00
<3>XXX:dd:rdev->kobj == ffff81011ed6dc60
<3>XXX:dd:rdev == ffff81007ff51800
<3>XXX:dd:rdev->kobj == ffff81007ff51860
<6>md: ... autorun DONE.
Here the system now asks for a root-fs as the normal root /dev/md1 was
not started.

I hope these outputs help, if more are needed, just ask.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-27 11:42     ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2007-12-27 14:30       ` Torsten Kaiser
  0 siblings, 0 replies; 146+ messages in thread
From: Torsten Kaiser @ 2007-12-27 14:30 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, Alasdair G Kergon, Greg KH, NeilBrown

[author CCed]
On Dec 27, 2007 12:42 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> On Dec 23, 2007 9:39 PM, Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> > On Sun, 23 Dec 2007 17:27:12 +0100 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> >
> > > On Dec 23, 2007 8:30 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
> > > >
> > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> > > [snip]
> > > > +md-allow-devices-to-be-shared-between-md-arrays.patch
[snip]
> OK, I debugged this some more. It looks like two bugs meshed together.
>
> One new bug: "do_md_run() returned -22"
> I can't seem to start my raid anymore.
> The following part of md-allow-devices-to-be-shared-between-md-arrays
> adds a new check to do_md_run() (drivers/md/md.c) that fails for my system:
> @@ -3213,8 +3283,11 @@ static int do_md_run(mddev_t * mddev)
>         /*
>          * Analyze all RAID superblock(s)
>          */
> -       if (!mddev->raid_disks)
> +       if (!mddev->raid_disks) {
> +               if (!mddev->persistent)
> +                       return -EINVAL;
>                 analyze_sbs(mddev);
> +       }
>
>         chunk_size = mddev->chunk_size;

This hunk is indeed buggy.
analyze_sbs() calls load_super() and validate_super() and only the
validate function is setting mddev->persistent, so this new check
needs to be after the call analyze_sbs(mddev).

Changing this allows my system to boot correctly, including starting KDE.

Please note, that this is not a fix for the OOPS in delayed_delete,
the OOPS just doesn't happen, because the buggy error path is no
longer used.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* 2.6.24-rc6-mm1 - crash in tick_sched_timer/update_process_times
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (11 preceding siblings ...)
  2007-12-27  9:16 ` 2.6.24-rc6-mm1 - power_supply driver dmesg weirdness? Valdis.Kletnieks
@ 2007-12-27 17:54 ` Valdis.Kletnieks
  2007-12-28  7:34   ` Andrew Morton
  2007-12-29 16:02   ` Valdis.Kletnieks
  2007-12-31 18:05 ` [PATCH -mm] crypto: scatterwalk.h needs sched.h Randy Dunlap
                   ` (7 subsequent siblings)
  20 siblings, 2 replies; 146+ messages in thread
From: Valdis.Kletnieks @ 2007-12-27 17:54 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3883 bytes --]

On Sat, 22 Dec 2007 23:30:56 PST, Andrew Morton said:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/

I seem to be on a roll here... :)

X86_64 kernel, Dell Latitude D820, Core2 T7200 processor...

(Yes, I know it's tainted.  If I *have* to, I'll try to get an untainted one,
which will be a pain - the oss 'nv' driver is a tad busticated on my box at
the moment).

Took me a bunch of hours to find a way to repeat this one, but it seems
pretty consistent - I exit an 'Eterm' process and ka-blam.  First guess
I have is that we hit a race and the timer popped right in the middle of
a process exiting and we try to update process times on an already-defunct
process table entry?

This ring any bells or brown-paper-bag D'Oh!s before I go bisecting?

[15345.901919] Unable to handle kernel paging request at 000000af008c00cd RIP:
[15345.901934]  [<ffffffff802310d9>] scheduler_tick+0xdb/0x1c4
[15345.901952] PGD 0
[15345.901959] Oops: 0000 [1] PREEMPT SMP
[15345.901972] last sysfs file: /sys/devices/platform/coretemp.1/temp1_input
[15345.901978] CPU 1
[15345.901984] Modules linked in: irnet ppp_generic slhc irtty_sir sir_dev ircomm_tty ircomm irda crc_ccitt coretemp nf_conntrack_ftp xt_pkttype ipt_REJECT ipt_osf nf_conntrack_ipv4 xt_ipisforif ipt_recent ipt_LOG xt_u32 iptable_filter ip_tables xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6t_LOG xt_limit ip6table_filter ip6_tables x_tables sha256_generic aes_generic acpi_cpufreq tpm_tis pcmcia gspca(U) iwl3945 firmware_class iTCO_wdt yenta_socket compat_ioctl32 ohci1394 rsrc_nonstatic iTCO_vendor_support mac80211 ieee1394 pcmcia_core nvidia(P)(U) watchdog_core battery videodev ac watchdog_dev v4l2_common snd_hda_intel v4l1_compat thermal power_supply cfg80211 button intel_agp processor rtc
[15345.902170] Pid: 0, comm: Eterm Tainted: P        2.6.24-rc6-mm1 #4
[15345.902176] RIP: 0010:[<ffffffff802310d9>]  [<ffffffff802310d9>] scheduler_tick+0xdb/0x1c4
[15345.902189] RSP: 0018:ffff81007f8a3eb8  EFLAGS: 00010083
[15345.902195] RAX: 000000af008c005d RBX: 00000df4fefac7d9 RCX: 0000000000000004
[15345.902202] RDX: 0000000000000004 RSI: ffff81007e405600 RDI: ffff810001011180
[15345.902208] RBP: ffff81007f8a3ed8 R08: 0000000000000010 R09: 0000000000000001
[15345.902214] R10: ffff8100808f4000 R11: ffffffff8071d180 R12: ffff810001011180
[15345.902219] R13: 0000000000000001 R14: ffff81007e405600 R15: 0000000000000001
[15345.902226] FS:  0000000000000000(0000) GS:ffff81007f86f9c0(0063) knlGS:00000000f7dab6c0
[15345.902233] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
[15345.902238] CR2: 000000af008c00cd CR3: 00000000766c8000 CR4: 00000000000006e0
[15345.902244] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[15345.902249] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[15345.902256] Process Eterm (pid: 0, threadinfo 4394404dffffffff, task ffff81007e405600)
[15345.902261] Stack:  0000000000000001 0000000000000000 ffff81007e405600 00000c71d7bbe7da
[15345.902279]  ffff81007f8a3f08 ffffffff8023f913 ffff81007f8a3f08 ffff81000100e060
[15345.902293]  ffff810077161b08 ffff81000100df60 ffff81007f8a3f38 ffffffff80251b7d
[15345.902306] Call Trace:
[15345.902312]  <IRQ>  [<ffffffff8023f913>] update_process_times+0x4a/0x5b
[15345.902334]  [<ffffffff80251b7d>] tick_sched_timer+0x8e/0xcb
[15345.902345]  [<ffffffff8024ce2c>] hrtimer_interrupt+0x111/0x1a1
[15345.902357]  [<ffffffff8022733e>] ia32_setup_frame+0xb5/0x1b7
[15345.902367]  [<ffffffff8021f174>] smp_apic_timer_interrupt+0x86/0xa6
[15345.902377]  [<ffffffff8020cca6>] apic_timer_interrupt+0x66/0x70
[15345.902383]  <EOI>
[15345.902389]
[15345.902390] Code: ff 50 70 4c 89 e7 e8 4a 2d 2f 00 44 89 ef e8 85 9f ff ff 41
[15345.902445] RIP  [<ffffffff802310d9>] scheduler_tick+0xdb/0x1c4
[15345.902455]  RSP <ffff81007f8a3eb8>
[15345.902461] CR2: 000000af008c00cd


[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 - crash in tick_sched_timer/update_process_times
  2007-12-27 17:54 ` 2.6.24-rc6-mm1 - crash in tick_sched_timer/update_process_times Valdis.Kletnieks
@ 2007-12-28  7:34   ` Andrew Morton
  2007-12-29 16:02   ` Valdis.Kletnieks
  1 sibling, 0 replies; 146+ messages in thread
From: Andrew Morton @ 2007-12-28  7:34 UTC (permalink / raw)
  To: Valdis.Kletnieks; +Cc: linux-kernel, Thomas Gleixner, Ingo Molnar

On Thu, 27 Dec 2007 12:54:34 -0500 Valdis.Kletnieks@vt.edu wrote:

> On Sat, 22 Dec 2007 23:30:56 PST, Andrew Morton said:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> 
> I seem to be on a roll here... :)

Yup.  But please do try to get the cc's right.  Especially when I'm lying
on a beach.

> X86_64 kernel, Dell Latitude D820, Core2 T7200 processor...
> 
> (Yes, I know it's tainted.  If I *have* to, I'll try to get an untainted one,
> which will be a pain - the oss 'nv' driver is a tad busticated on my box at
> the moment).

I doubt if the nvidia driver is involved in this.

> Took me a bunch of hours to find a way to repeat this one, but it seems
> pretty consistent - I exit an 'Eterm' process and ka-blam.  First guess
> I have is that we hit a race and the timer popped right in the middle of
> a process exiting and we try to update process times on an already-defunct
> process table entry?
> 
> This ring any bells or brown-paper-bag D'Oh!s before I go bisecting?
> 
> [15345.901919] Unable to handle kernel paging request at 000000af008c00cd RIP:
> [15345.901934]  [<ffffffff802310d9>] scheduler_tick+0xdb/0x1c4
> [15345.901952] PGD 0
> [15345.901959] Oops: 0000 [1] PREEMPT SMP
> [15345.901972] last sysfs file: /sys/devices/platform/coretemp.1/temp1_input
> [15345.901978] CPU 1
> [15345.901984] Modules linked in: irnet ppp_generic slhc irtty_sir sir_dev ircomm_tty ircomm irda crc_ccitt coretemp nf_conntrack_ftp xt_pkttype ipt_REJECT ipt_osf nf_conntrack_ipv4 xt_ipisforif ipt_recent ipt_LOG xt_u32 iptable_filter ip_tables xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6t_LOG xt_limit ip6table_filter ip6_tables x_tables sha256_generic aes_generic acpi_cpufreq tpm_tis pcmcia gspca(U) iwl3945 firmware_class iTCO_wdt yenta_socket compat_ioctl32 ohci1394 rsrc_nonstatic iTCO_vendor_support mac80211 ieee1394 pcmcia_core nvidia(P)(U) watchdog_core battery videodev ac watchdog_dev v4l2_common snd_hda_intel v4l1_compat thermal power_supply cfg80211 button intel_agp processor rtc
> [15345.902170] Pid: 0, comm: Eterm Tainted: P        2.6.24-rc6-mm1 #4
> [15345.902176] RIP: 0010:[<ffffffff802310d9>]  [<ffffffff802310d9>] scheduler_tick+0xdb/0x1c4
> [15345.902189] RSP: 0018:ffff81007f8a3eb8  EFLAGS: 00010083
> [15345.902195] RAX: 000000af008c005d RBX: 00000df4fefac7d9 RCX: 0000000000000004
> [15345.902202] RDX: 0000000000000004 RSI: ffff81007e405600 RDI: ffff810001011180
> [15345.902208] RBP: ffff81007f8a3ed8 R08: 0000000000000010 R09: 0000000000000001
> [15345.902214] R10: ffff8100808f4000 R11: ffffffff8071d180 R12: ffff810001011180
> [15345.902219] R13: 0000000000000001 R14: ffff81007e405600 R15: 0000000000000001
> [15345.902226] FS:  0000000000000000(0000) GS:ffff81007f86f9c0(0063) knlGS:00000000f7dab6c0
> [15345.902233] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
> [15345.902238] CR2: 000000af008c00cd CR3: 00000000766c8000 CR4: 00000000000006e0
> [15345.902244] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [15345.902249] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [15345.902256] Process Eterm (pid: 0, threadinfo 4394404dffffffff, task ffff81007e405600)
> [15345.902261] Stack:  0000000000000001 0000000000000000 ffff81007e405600 00000c71d7bbe7da
> [15345.902279]  ffff81007f8a3f08 ffffffff8023f913 ffff81007f8a3f08 ffff81000100e060
> [15345.902293]  ffff810077161b08 ffff81000100df60 ffff81007f8a3f38 ffffffff80251b7d
> [15345.902306] Call Trace:
> [15345.902312]  <IRQ>  [<ffffffff8023f913>] update_process_times+0x4a/0x5b
> [15345.902334]  [<ffffffff80251b7d>] tick_sched_timer+0x8e/0xcb
> [15345.902345]  [<ffffffff8024ce2c>] hrtimer_interrupt+0x111/0x1a1
> [15345.902357]  [<ffffffff8022733e>] ia32_setup_frame+0xb5/0x1b7
> [15345.902367]  [<ffffffff8021f174>] smp_apic_timer_interrupt+0x86/0xa6
> [15345.902377]  [<ffffffff8020cca6>] apic_timer_interrupt+0x66/0x70
> [15345.902383]  <EOI>
> [15345.902389]
> [15345.902390] Code: ff 50 70 4c 89 e7 e8 4a 2d 2f 00 44 89 ef e8 85 9f ff ff 41
> [15345.902445] RIP  [<ffffffff802310d9>] scheduler_tick+0xdb/0x1c4
> [15345.902455]  RSP <ffff81007f8a3eb8>
> [15345.902461] CR2: 000000af008c00cd
> 
> 

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 Kernel panics at different functions ()
  2007-12-27  9:54   ` Andrew Morton
  2007-12-27 10:25     ` Kamalesh Babulal
@ 2007-12-28  9:11     ` Kamalesh Babulal
  2007-12-28 13:03       ` Dhaval Giani
  1 sibling, 1 reply; 146+ messages in thread
From: Kamalesh Babulal @ 2007-12-28  9:11 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-kernel, Ingo Molnar, Andy Whitcroft, Balbir Singh,
	Srivatsa Vaddagiri, Dhaval Giani

Andrew Morton wrote:
> On Thu, 27 Dec 2007 14:19:54 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> 
>> Hi Andrew,
>>
>> The 2.6.24-rc6-mm1 kernel with hotfix x86-fix-system-gate-related-crash.patch applied
>> panics while booting on a x86_64 box
>>
>> Unable to handle kernel NULL pointer dereference at 0000000000000046 RIP: 
>>  [<ffffffff80369a0b>] rb_erase+0xe7/0x2a3
>> PGD 17ff65067 PUD 17f1c7067 PMD 0 
>> Oops: 0000 [1] SMP 
>> last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:02:04.0/host0/target0:0:6/0:0:6:0/type
>> CPU 0 
>> Modules linked in:
>> Pid: 0, comm: swapper Not tainted 2.6.24-rc6-mm1-autokern1 #1
>> RIP: 0010:[<ffffffff80369a0b>]  [<ffffffff80369a0b>] rb_erase+0xe7/0x2a3
>> RSP: 0000:ffffffff80650e00  EFLAGS: 00010002
>> RAX: ffff8101fe9568c8 RBX: ffff8100010062a8 RCX: ffff8101fe9568b0
>> RDX: ffff8101fe9568c8 RSI: 0000000000000046 RDI: 0000000000000000
>> RBP: ffffffff80650e10 R08: ffff8101fe9568c8 R09: 0000000000000086
>> R10: 0000000000000000 R11: 00000000000001e8 R12: ffff8100010062b8
>> R13: 0000000000000002 R14: ffff810001006260 R15: 0000000000000001
>> FS:  0000000000000000(0000) GS:ffffffff805dc000(0000) knlGS:00000000f31ffbb0
>> CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
>> CR2: 0000000000000046 CR3: 000000017f0ab000 CR4: 00000000000006e0
>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>> Process swapper (pid: 0, threadinfo ffffffff805f6000, task ffffffff805a2080)
>> Stack:  ffff8100010062a8 ffff8101fe9568b0 ffffffff80650e40 ffffffff8024be16
>>  ffffffff80369d65 ffffffff80369d65 ffff8101fe9568b0 ffff8100010062a8
>>  ffffffff80650eb0 ffffffff8024c1d5 ffffffffb88cc28e 0000000006e73eff
>> Call Trace:
>>  <IRQ>  [<ffffffff8024be16>] __remove_hrtimer+0x2e/0x3c
>>  [<ffffffff80369d65>] __down_read_trylock+0x16/0x42
>>  [<ffffffff80369d65>] __down_read_trylock+0x16/0x42
>>  [<ffffffff8024c1d5>] hrtimer_run_queues+0x130/0x191
>>  [<ffffffff8023fd09>] run_timer_softirq+0x28/0x1a7
>>  [<ffffffff8023c018>] __do_softirq+0x55/0xc2
>>  [<ffffffff8020c73c>] call_softirq+0x1c/0x28
>>  [<ffffffff8020e719>] do_softirq+0x32/0x9d
>>  [<ffffffff8023c0dd>] irq_exit+0x3f/0x41
>>  [<ffffffff8021ff85>] smp_apic_timer_interrupt+0x92/0xa7
>>  [<ffffffff8020c1e6>] apic_timer_interrupt+0x66/0x70
>>  <EOI>  [<ffffffff802095f5>] default_idle+0x36/0x5e
>>  [<ffffffff802095f0>] default_idle+0x31/0x5e
>>  [<ffffffff802095bf>] default_idle+0x0/0x5e
>>  [<ffffffff802096b6>] cpu_idle+0x90/0xb2
>>  [<ffffffff804b0126>] rest_init+0x5a/0x5c
>>  [<ffffffff806017ee>] start_kernel+0x2b8/0x2c4
>>  [<ffffffff8060112b>] _sinittext+0x12b/0x132
>>
>>
> 
> It does seem to be mostly hrtimer-related.  But surely the hrtimer system
> is initialised by the time tis happens.
> 
> The usual refrain: is it possible to run a bisection search?
Hi Andrew,

While doing the git bisect, following panic was seen

Unable to handle kernel paging request at 000000000000401e RIP: 
 [<ffffffff80232ec8>] load_balance_monitor+0x15e/0x2a4
PGD 0 
Oops: 0000 [1] SMP 
last sysfs file: /devices/pci0000:00/0000:00:0a.0/0000:02:04.0/host0/target0:0:6/0:0:6:0/type
CPU 1 
Modules linked in:
Pid: 15, comm: load_balance_mo Not tainted 2.6.24-rc6-mm1-autokern1 #1
RIP: 0010:[<ffffffff80232ec8>]  [<ffffffff80232ec8>] load_balance_monitor+0x15e/0x2a4
RSP: 0000:ffff81007ffb7eb0  EFLAGS: 00010297
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 000000000000401e RSI: ffff81007ffb7ed8 RDI: 0000000000000000
RBP: ffff81007ffb7f20 R08: ffff81007ffb6000 R09: ffff81007ffb6000
R10: ffff81007ffb6000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000000800 R15: ffff8101fe997f00
FS:  0000000000000000(0000) GS:ffff8100e3b10000(0000) knlGS:00000000f73e1bb0
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 000000000000401e CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process load_balance_mo (pid: 15, threadinfo ffff81007ffb6000, task ffff81007ff94790)
Stack:  0000000000002000 0000000000000000 ffff810001009cc0 00000001e3b29d90
 0000008000000000 000000000000000f ffff81007f0be780 000000000000000f
 000000017ffb7f20 0000000000000000 00000000fffffffc ffffffffffffffff
Call Trace:
 [<ffffffff80232d6a>] load_balance_monitor+0x0/0x2a4
 [<ffffffff80247830>] kthread+0x3d/0x63
 [<ffffffff8020c2b8>] child_rip+0xa/0x12
 [<ffffffff802477f3>] kthread+0x0/0x63
 [<ffffffff8020c2ae>] child_rip+0x0/0x12


Code: 48 8b 04 c2 48 8b 10 48 01 55 98 e8 ce 40 12 00 83 f8 07 41 
RIP  [<ffffffff80232ec8>] load_balance_monitor+0x15e/0x2a4
 RSP <ffff81007ffb7eb0>
CR2: 000000000000401e


The git-sched.patch is causing this panic, and i am searching for the patch causing the
hrtimer-related panic.
 
-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 Kernel panics at different functions ()
  2007-12-28  9:11     ` Kamalesh Babulal
@ 2007-12-28 13:03       ` Dhaval Giani
  0 siblings, 0 replies; 146+ messages in thread
From: Dhaval Giani @ 2007-12-28 13:03 UTC (permalink / raw)
  To: Kamalesh Babulal
  Cc: Andrew Morton, linux-kernel, Ingo Molnar, Andy Whitcroft,
	Balbir Singh, Srivatsa Vaddagiri

> 
> While doing the git bisect, following panic was seen
> 
> Unable to handle kernel paging request at 000000000000401e RIP: 
>  [<ffffffff80232ec8>] load_balance_monitor+0x15e/0x2a4
> PGD 0 
> Oops: 0000 [1] SMP 
> last sysfs file: /devices/pci0000:00/0000:00:0a.0/0000:02:04.0/host0/target0:0:6/0:0:6:0/type
> CPU 1 
> Modules linked in:
> Pid: 15, comm: load_balance_mo Not tainted 2.6.24-rc6-mm1-autokern1 #1
> RIP: 0010:[<ffffffff80232ec8>]  [<ffffffff80232ec8>] load_balance_monitor+0x15e/0x2a4
> RSP: 0000:ffff81007ffb7eb0  EFLAGS: 00010297
> RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
> RDX: 000000000000401e RSI: ffff81007ffb7ed8 RDI: 0000000000000000
> RBP: ffff81007ffb7f20 R08: ffff81007ffb6000 R09: ffff81007ffb6000
> R10: ffff81007ffb6000 R11: 0000000000000000 R12: 0000000000000000
> R13: 0000000000000003 R14: 0000000000000800 R15: ffff8101fe997f00
> FS:  0000000000000000(0000) GS:ffff8100e3b10000(0000) knlGS:00000000f73e1bb0
> CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 000000000000401e CR3: 0000000000201000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process load_balance_mo (pid: 15, threadinfo ffff81007ffb6000, task ffff81007ff94790)
> Stack:  0000000000002000 0000000000000000 ffff810001009cc0 00000001e3b29d90
>  0000008000000000 000000000000000f ffff81007f0be780 000000000000000f
>  000000017ffb7f20 0000000000000000 00000000fffffffc ffffffffffffffff
> Call Trace:
>  [<ffffffff80232d6a>] load_balance_monitor+0x0/0x2a4
>  [<ffffffff80247830>] kthread+0x3d/0x63
>  [<ffffffff8020c2b8>] child_rip+0xa/0x12
>  [<ffffffff802477f3>] kthread+0x0/0x63
>  [<ffffffff8020c2ae>] child_rip+0x0/0x12
> 
> 
> Code: 48 8b 04 c2 48 8b 10 48 01 55 98 e8 ce 40 12 00 83 f8 07 41 
> RIP  [<ffffffff80232ec8>] load_balance_monitor+0x15e/0x2a4
>  RSP <ffff81007ffb7eb0>
> CR2: 000000000000401e
> 

Hmmm. Looking into it :-).

-- 
regards,
Dhaval

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-23 16:27 ` 2.6.24-rc6-mm1 Torsten Kaiser
  2007-12-23 20:39   ` 2.6.24-rc6-mm1 Andrew Morton
@ 2007-12-28 22:53   ` Torsten Kaiser
  2007-12-28 23:07     ` 2.6.24-rc6-mm1 Andrew Morton
  1 sibling, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2007-12-28 22:53 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel

On Dec 23, 2007 5:27 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> On Dec 23, 2007 8:30 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> I have finally given up on using 2.6.24-rc3-mm2 with slub_debug=FZP to
> get more information out of the random crashes I had seen with that
> version. (Did not crash once with slub_debug, so no new information on
> what the cause was)

Murphy: Just after sending that mail the system crashed two times with
slub_debug=FZP, but did not show any new informations.
No debug output from slub, only this stacktrace: (Its the same I
already reported in the 2.6.24-rc3-mm2 thread)

[ 7620.673012] ------------[ cut here ]------------
[ 7620.676291] kernel BUG at lib/list_debug.c:33!
[ 7620.679440] invalid opcode: 0000 [1] SMP
[ 7620.682319] last sysfs file:
/sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
[ 7620.687845] CPU 0
[ 7620.689300] Modules linked in: radeon drm nfsd exportfs w83792d
ipv6 tuner tea5767 tda8290 tuner_xc2028 tda9887 tuner_simple mt20xx
tea5761 tvaudio msp3400 bttv ir_common compat_ioctl32 videobuf_dma_sg
videobuf_core btcx_risc tveeprom videodev usbhid v4l2_common
v4l1_compat hid i2c_nforce2 sg pata_amd
[ 7620.708561] Pid: 5698, comm: nfsv4-svc Not tainted 2.6.24-rc3-mm2 #2
[ 7620.713080] RIP: 0010:[<ffffffff803bae54>]  [<ffffffff803bae54>]
__list_add+0x54/0x60
[ 7620.718667] RSP: 0018:ffff81011bca1dc0  EFLAGS: 00010282
[ 7620.722439] RAX: 0000000000000088 RBX: ffff81011c862c48 RCX: 0000000000000002
[ 7620.727504] RDX: ffff81011bc82ef0 RSI: 0000000000000001 RDI: ffffffff807590c0
[ 7620.732581] RBP: ffff81011bca1dc0 R08: 0000000000000001 R09: 0000000000000000
[ 7620.737658] R10: ffff810080058d48 R11: 0000000000000001 R12: ffff81011ed8d1c8
[ 7620.742711] R13: ffff81011ed8d200 R14: ffff81011ed8d200 R15: ffff81011cc0e578
[ 7620.747806] FS:  00007ffe400116f0(0000) GS:ffffffff807d4000(0000)
knlGS:00000000f73558e0
[ 7620.753535] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 7620.757607] CR2: 00000000017071dc CR3: 00000001188b5000 CR4: 00000000000006e0
[ 7620.762677] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7620.767748] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 7620.772808] Process nfsv4-svc (pid: 5698, threadinfo
FFFF81011BCA0000, task FFFF81011BC82EF0)
[ 7620.778872] Stack:  ffff81011bca1e00 ffffffff805be26e
ffff81011ed8d1d0 ffff81011cc0e578
[ 7620.784626]  ffff81011c862c48 ffff81011c8be000 ffff810054a8b060
ffff81011cc0e588
[ 7620.789913]  ffff81011bca1e10 ffffffff805be367 ffff81011bca1ee0
ffffffff805bf0ac
[ 7620.795062] Call Trace:
[ 7620.796941]  [<ffffffff805be26e>] svc_xprt_enqueue+0x1ae/0x250
[ 7620.801087]  [<ffffffff805be367>] svc_xprt_received+0x17/0x20
[ 7620.805199]  [<ffffffff805bf0ac>] svc_recv+0x39c/0x840
[ 7620.808851]  [<ffffffff805bea3f>] svc_send+0xaf/0xd0
[ 7620.812374]  [<ffffffff8022f590>] default_wake_function+0x0/0x10
[ 7620.816637]  [<ffffffff803163ea>] nfs_callback_svc+0x7a/0x130
[ 7620.820712]  [<ffffffff805cfea2>] trace_hardirqs_on_thunk+0x35/0x3a
[ 7620.825174]  [<ffffffff80259f8f>] trace_hardirqs_on+0xbf/0x160
[ 7620.829335]  [<ffffffff8020cbc8>] child_rip+0xa/0x12
[ 7620.832842]  [<ffffffff8020c2df>] restore_args+0x0/0x30
[ 7620.836554]  [<ffffffff80316370>] nfs_callback_svc+0x0/0x130
[ 7620.840564]  [<ffffffff8020cbbe>] child_rip+0x0/0x12
[ 7620.844102]
[ 7620.845168] INFO: lockdep is turned off.
[ 7620.847964]
[ 7620.847965] Code: 0f 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 8b 16
48 89 e5 e8
[ 7620.854334] RIP  [<ffffffff803bae54>] __list_add+0x54/0x60
[ 7620.858255]  RSP <ffff81011bca1dc0>
[ 7620.860724] Kernel panic - not syncing: Aiee, killing interrupt handler!


The cause, why I am resending this: I just got a crash with
2.6.24-rc6-mm1, again looking network related:

[93436.933356] WARNING: at include/net/dst.h:165 dst_release()
[93436.936685] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
[93436.939292]
[93436.939293] Call Trace:
[93436.939304]  [<ffffffff80531d2d>] skb_release_all+0xdd/0x110
[93436.939307]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
[93436.939309]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
[93436.939312]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
[93436.939315]  [<ffffffff805a0c91>] unix_release+0x21/0x30
[93436.939318]  [<ffffffff8052b144>] sock_release+0x24/0x90
[93436.939320]  [<ffffffff8052b656>] sock_close+0x26/0x50
[93436.939324]  [<ffffffff8029f921>] __fput+0xc1/0x230
[93436.939327]  [<ffffffff8029fe46>] fput+0x16/0x20
[93436.939329]  [<ffffffff8029c576>] filp_close+0x56/0x90
[93436.939331]  [<ffffffff8029de46>] sys_close+0xa6/0x110
[93436.939335]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
[93436.939337]
[93436.947241] general protection fault: 0000 [1] SMP
[93436.947243] last sysfs file:
/sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.1/irq
[93436.947245] CPU 1
[93436.947246] Modules linked in: radeon drm nfsd exportfs w83792d
ipv6 tuner tea5767 tda8290 tuner_xc2028 tda9887 tuner_simple mt20xx
tea5761 tvaudio msp3400 bttv ir_common compat_ioctl32 videobuf_dma_sg
videobuf_core btcx_risc tveeprom usbhid videodev v4l2_common hid
v4l1_compat pata_amd sg i2c_nforce2
[93436.947257] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
[93436.947259] RIP: 0010:[<ffffffff80531438>]  [<ffffffff80531438>]
skb_drop_list+0x18/0x30
[93436.947262] RSP: 0018:ffff810005f4fda8  EFLAGS: 00010286
[93436.947263] RAX: ab1ed5ca5b74e7de RBX: ab1ed5ca5b74e7de RCX: 000000000000d135
[93436.947265] RDX: ffff81011d089a80 RSI: 0000000000000001 RDI: ffff81011d089a88
[93436.947266] RBP: ffff810005f4fdb8 R08: 0000000000000001 R09: 0000000000000006
[93436.947268] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8100de02c500
[93436.947269] R13: ffff81011c188a00 R14: 0000000000000001 R15: ffff81011c189198
[93436.947271] FS:  00007fb5bde0d700(0000) GS:ffff81007ff22000(0000)
knlGS:0000000000000000
[93436.947273] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[93436.947274] CR2: 00007fb5bdd76000 CR3: 00000000664d5000 CR4: 00000000000006e0
[93436.947276] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[93436.947277] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[93436.947279] Process konqueror (pid: 8079, threadinfo
ffff810005f4e000, task ffff8100a1dec000)
[93436.947281] Stack:  ffff810005f4fdd8 ffff810116c86140
ffff810005f4fdd8 ffffffff805314ae
[93436.947284]  ffff810116c86140 ffff8100de02c500 ffff810005f4fdf8
ffffffff80531cf0
[93436.947286]  ffff8100de02c500 ffff81011c188b48 ffff810005f4fe18
ffffffff80531311
[93436.947288] Call Trace:
[93436.947290]  [<ffffffff805314ae>] skb_release_data+0x5e/0xa0
[93436.947293]  [<ffffffff80531cf0>] skb_release_all+0xa0/0x110
[93436.947295]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
[93436.947297]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
[93436.947299]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
[93436.947302]  [<ffffffff805a0c91>] unix_release+0x21/0x30
[93436.947304]  [<ffffffff8052b144>] sock_release+0x24/0x90
[93436.947307]  [<ffffffff8052b656>] sock_close+0x26/0x50
[93436.947309]  [<ffffffff8029f921>] __fput+0xc1/0x230
[93436.947312]  [<ffffffff8029fe46>] fput+0x16/0x20
[93436.947314]  [<ffffffff8029c576>] filp_close+0x56/0x90
[93436.947316]  [<ffffffff8029de46>] sys_close+0xa6/0x110
[93436.947319]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
[93436.947322]
[93436.947322]
[93436.947323] Code: 48 8b 18 48 89 c7 e8 5d ff ff ff 48 85 db 75 ed
48 83 c4 08
[93436.947328] RIP  [<ffffffff80531438>] skb_drop_list+0x18/0x30
[93436.947330]  RSP <ffff810005f4fda8>
[93436.947332] ---[ end trace befb7cc3528ab3b1 ]---

Don't know in what direction I should look.
I also can't easily reproduce this, it happened after several hours of
watching a wmv stream with mplayer...

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-28 22:53   ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2007-12-28 23:07     ` Andrew Morton
  2007-12-29 16:51       ` 2.6.24-rc6-mm1 Torsten Kaiser
  2007-12-30 21:24       ` 2.6.24-rc6-mm1 J. Bruce Fields
  0 siblings, 2 replies; 146+ messages in thread
From: Andrew Morton @ 2007-12-28 23:07 UTC (permalink / raw)
  To: Torsten Kaiser; +Cc: linux-kernel, Neil Brown, J. Bruce Fields, netdev

On Fri, 28 Dec 2007 23:53:49 +0100 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:

> On Dec 23, 2007 5:27 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> > On Dec 23, 2007 8:30 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> > I have finally given up on using 2.6.24-rc3-mm2 with slub_debug=FZP to
> > get more information out of the random crashes I had seen with that
> > version. (Did not crash once with slub_debug, so no new information on
> > what the cause was)
> 
> Murphy: Just after sending that mail the system crashed two times with
> slub_debug=FZP, but did not show any new informations.
> No debug output from slub, only this stacktrace: (Its the same I
> already reported in the 2.6.24-rc3-mm2 thread)
> 
> [ 7620.673012] ------------[ cut here ]------------
> [ 7620.676291] kernel BUG at lib/list_debug.c:33!
> [ 7620.679440] invalid opcode: 0000 [1] SMP
> [ 7620.682319] last sysfs file:
> /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
> [ 7620.687845] CPU 0
> [ 7620.689300] Modules linked in: radeon drm nfsd exportfs w83792d
> ipv6 tuner tea5767 tda8290 tuner_xc2028 tda9887 tuner_simple mt20xx
> tea5761 tvaudio msp3400 bttv ir_common compat_ioctl32 videobuf_dma_sg
> videobuf_core btcx_risc tveeprom videodev usbhid v4l2_common
> v4l1_compat hid i2c_nforce2 sg pata_amd
> [ 7620.708561] Pid: 5698, comm: nfsv4-svc Not tainted 2.6.24-rc3-mm2 #2
> [ 7620.713080] RIP: 0010:[<ffffffff803bae54>]  [<ffffffff803bae54>]
> __list_add+0x54/0x60
> [ 7620.718667] RSP: 0018:ffff81011bca1dc0  EFLAGS: 00010282
> [ 7620.722439] RAX: 0000000000000088 RBX: ffff81011c862c48 RCX: 0000000000000002
> [ 7620.727504] RDX: ffff81011bc82ef0 RSI: 0000000000000001 RDI: ffffffff807590c0
> [ 7620.732581] RBP: ffff81011bca1dc0 R08: 0000000000000001 R09: 0000000000000000
> [ 7620.737658] R10: ffff810080058d48 R11: 0000000000000001 R12: ffff81011ed8d1c8
> [ 7620.742711] R13: ffff81011ed8d200 R14: ffff81011ed8d200 R15: ffff81011cc0e578
> [ 7620.747806] FS:  00007ffe400116f0(0000) GS:ffffffff807d4000(0000)
> knlGS:00000000f73558e0
> [ 7620.753535] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [ 7620.757607] CR2: 00000000017071dc CR3: 00000001188b5000 CR4: 00000000000006e0
> [ 7620.762677] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 7620.767748] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [ 7620.772808] Process nfsv4-svc (pid: 5698, threadinfo
> FFFF81011BCA0000, task FFFF81011BC82EF0)
> [ 7620.778872] Stack:  ffff81011bca1e00 ffffffff805be26e
> ffff81011ed8d1d0 ffff81011cc0e578
> [ 7620.784626]  ffff81011c862c48 ffff81011c8be000 ffff810054a8b060
> ffff81011cc0e588
> [ 7620.789913]  ffff81011bca1e10 ffffffff805be367 ffff81011bca1ee0
> ffffffff805bf0ac
> [ 7620.795062] Call Trace:
> [ 7620.796941]  [<ffffffff805be26e>] svc_xprt_enqueue+0x1ae/0x250
> [ 7620.801087]  [<ffffffff805be367>] svc_xprt_received+0x17/0x20
> [ 7620.805199]  [<ffffffff805bf0ac>] svc_recv+0x39c/0x840
> [ 7620.808851]  [<ffffffff805bea3f>] svc_send+0xaf/0xd0
> [ 7620.812374]  [<ffffffff8022f590>] default_wake_function+0x0/0x10
> [ 7620.816637]  [<ffffffff803163ea>] nfs_callback_svc+0x7a/0x130
> [ 7620.820712]  [<ffffffff805cfea2>] trace_hardirqs_on_thunk+0x35/0x3a
> [ 7620.825174]  [<ffffffff80259f8f>] trace_hardirqs_on+0xbf/0x160
> [ 7620.829335]  [<ffffffff8020cbc8>] child_rip+0xa/0x12
> [ 7620.832842]  [<ffffffff8020c2df>] restore_args+0x0/0x30
> [ 7620.836554]  [<ffffffff80316370>] nfs_callback_svc+0x0/0x130
> [ 7620.840564]  [<ffffffff8020cbbe>] child_rip+0x0/0x12
> [ 7620.844102]
> [ 7620.845168] INFO: lockdep is turned off.
> [ 7620.847964]
> [ 7620.847965] Code: 0f 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 8b 16
> 48 89 e5 e8
> [ 7620.854334] RIP  [<ffffffff803bae54>] __list_add+0x54/0x60
> [ 7620.858255]  RSP <ffff81011bca1dc0>
> [ 7620.860724] Kernel panic - not syncing: Aiee, killing interrupt handler!
> 

That looks like a sunrpc bug.  git-nfsd has bene mucking around in there a
bit.

> 
> The cause, why I am resending this: I just got a crash with
> 2.6.24-rc6-mm1, again looking network related:
> 
> [93436.933356] WARNING: at include/net/dst.h:165 dst_release()
> [93436.936685] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
> [93436.939292]
> [93436.939293] Call Trace:
> [93436.939304]  [<ffffffff80531d2d>] skb_release_all+0xdd/0x110
> [93436.939307]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
> [93436.939309]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
> [93436.939312]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
> [93436.939315]  [<ffffffff805a0c91>] unix_release+0x21/0x30
> [93436.939318]  [<ffffffff8052b144>] sock_release+0x24/0x90
> [93436.939320]  [<ffffffff8052b656>] sock_close+0x26/0x50
> [93436.939324]  [<ffffffff8029f921>] __fput+0xc1/0x230
> [93436.939327]  [<ffffffff8029fe46>] fput+0x16/0x20
> [93436.939329]  [<ffffffff8029c576>] filp_close+0x56/0x90
> [93436.939331]  [<ffffffff8029de46>] sys_close+0xa6/0x110
> [93436.939335]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
> [93436.939337]
> [93436.947241] general protection fault: 0000 [1] SMP
> [93436.947243] last sysfs file:
> /sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.1/irq
> [93436.947245] CPU 1
> [93436.947246] Modules linked in: radeon drm nfsd exportfs w83792d
> ipv6 tuner tea5767 tda8290 tuner_xc2028 tda9887 tuner_simple mt20xx
> tea5761 tvaudio msp3400 bttv ir_common compat_ioctl32 videobuf_dma_sg
> videobuf_core btcx_risc tveeprom usbhid videodev v4l2_common hid
> v4l1_compat pata_amd sg i2c_nforce2
> [93436.947257] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
> [93436.947259] RIP: 0010:[<ffffffff80531438>]  [<ffffffff80531438>]
> skb_drop_list+0x18/0x30
> [93436.947262] RSP: 0018:ffff810005f4fda8  EFLAGS: 00010286
> [93436.947263] RAX: ab1ed5ca5b74e7de RBX: ab1ed5ca5b74e7de RCX: 000000000000d135
> [93436.947265] RDX: ffff81011d089a80 RSI: 0000000000000001 RDI: ffff81011d089a88
> [93436.947266] RBP: ffff810005f4fdb8 R08: 0000000000000001 R09: 0000000000000006
> [93436.947268] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8100de02c500
> [93436.947269] R13: ffff81011c188a00 R14: 0000000000000001 R15: ffff81011c189198
> [93436.947271] FS:  00007fb5bde0d700(0000) GS:ffff81007ff22000(0000)
> knlGS:0000000000000000
> [93436.947273] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [93436.947274] CR2: 00007fb5bdd76000 CR3: 00000000664d5000 CR4: 00000000000006e0
> [93436.947276] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [93436.947277] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [93436.947279] Process konqueror (pid: 8079, threadinfo
> ffff810005f4e000, task ffff8100a1dec000)
> [93436.947281] Stack:  ffff810005f4fdd8 ffff810116c86140
> ffff810005f4fdd8 ffffffff805314ae
> [93436.947284]  ffff810116c86140 ffff8100de02c500 ffff810005f4fdf8
> ffffffff80531cf0
> [93436.947286]  ffff8100de02c500 ffff81011c188b48 ffff810005f4fe18
> ffffffff80531311
> [93436.947288] Call Trace:
> [93436.947290]  [<ffffffff805314ae>] skb_release_data+0x5e/0xa0
> [93436.947293]  [<ffffffff80531cf0>] skb_release_all+0xa0/0x110
> [93436.947295]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
> [93436.947297]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
> [93436.947299]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
> [93436.947302]  [<ffffffff805a0c91>] unix_release+0x21/0x30
> [93436.947304]  [<ffffffff8052b144>] sock_release+0x24/0x90
> [93436.947307]  [<ffffffff8052b656>] sock_close+0x26/0x50
> [93436.947309]  [<ffffffff8029f921>] __fput+0xc1/0x230
> [93436.947312]  [<ffffffff8029fe46>] fput+0x16/0x20
> [93436.947314]  [<ffffffff8029c576>] filp_close+0x56/0x90
> [93436.947316]  [<ffffffff8029de46>] sys_close+0xa6/0x110
> [93436.947319]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
> [93436.947322]
> [93436.947322]
> [93436.947323] Code: 48 8b 18 48 89 c7 e8 5d ff ff ff 48 85 db 75 ed
> 48 83 c4 08
> [93436.947328] RIP  [<ffffffff80531438>] skb_drop_list+0x18/0x30
> [93436.947330]  RSP <ffff810005f4fda8>
> [93436.947332] ---[ end trace befb7cc3528ab3b1 ]---

Yes, that looks more networking-related.

> Don't know in what direction I should look.
> I also can't easily reproduce this, it happened after several hours of
> watching a wmv stream with mplayer...
> 
> Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: some section mismatches on sparc64
  2007-12-27  3:05   ` David Miller
@ 2007-12-28 23:22     ` Adrian Bunk
  2007-12-29  8:14       ` David Miller
  0 siblings, 1 reply; 146+ messages in thread
From: Adrian Bunk @ 2007-12-28 23:22 UTC (permalink / raw)
  To: David Miller, Martin Habets; +Cc: m.kozlowski, akpm, linux-kernel, sparclinux

On Wed, Dec 26, 2007 at 07:05:04PM -0800, David Miller wrote:
> From: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
> Date: Wed, 26 Dec 2007 13:29:07 +0100
> 
> > WARNING: vmlinux.o(.text+0x46b04): Section mismatch: reference to .init.text:sun4v_ktsb_register (between 'smp_callin' and 'smp_fill_in_sib_core_maps')
> 
> Well known and I see them every build and so does everyone
> else on sparc64.
> 
> They are harmless and as time allows I try to find ways
> to get rid of them but it's very low priority.

At least the sunserial_console_match() one is an obvious Oops 
(EXPORT_SYMBOL of an __init function).

The comment in the description of
commit 58d784a5c754cd66ecd4791222162504d3c16c74 the warning was bogus    
is bullshit.

I'm not sure whether this might count as a 2.6.24-rc regression or 
whether 2.6.23 is simply differently but similarly broken (does anyone 
actually use the Sun console drivers modular?).

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: some section mismatches on sparc64
  2007-12-28 23:22     ` Adrian Bunk
@ 2007-12-29  8:14       ` David Miller
  2007-12-29  8:27         ` David Miller
  2007-12-29  8:48         ` Adrian Bunk
  0 siblings, 2 replies; 146+ messages in thread
From: David Miller @ 2007-12-29  8:14 UTC (permalink / raw)
  To: bunk; +Cc: errandir_news, m.kozlowski, akpm, linux-kernel, sparclinux

From: Adrian Bunk <bunk@kernel.org>
Date: Sat, 29 Dec 2007 01:22:56 +0200

> At least the sunserial_console_match() one is an obvious Oops 
> (EXPORT_SYMBOL of an __init function).
> 
> The comment in the description of
> commit 58d784a5c754cd66ecd4791222162504d3c16c74 the warning was bogus    
> is bullshit.
> 
> I'm not sure whether this might count as a 2.6.24-rc regression or 
> whether 2.6.23 is simply differently but similarly broken (does anyone 
> actually use the Sun console drivers modular?).

You can't do that, the FOO_CONSOLE config options depend upon
FOO=y.

That's why I'm not worried about this issue and it's not critical at
all.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: some section mismatches on sparc64
  2007-12-29  8:14       ` David Miller
@ 2007-12-29  8:27         ` David Miller
  2007-12-29  8:48         ` Adrian Bunk
  1 sibling, 0 replies; 146+ messages in thread
From: David Miller @ 2007-12-29  8:27 UTC (permalink / raw)
  To: bunk; +Cc: errandir_news, m.kozlowski, akpm, linux-kernel, sparclinux

From: David Miller <davem@davemloft.net>
Date: Sat, 29 Dec 2007 00:14:11 -0800 (PST)

> You can't do that, the FOO_CONSOLE config options depend upon
> FOO=y.
> 
> That's why I'm not worried about this issue and it's not critical at
> all.

Adrian, if you're interested in tackling this "fun" problem,
have a look at add_preferred_console() and find a way to make
that not marked __init. (it's called by sunserial_console_match)

That's what causes this dependency chain of __init problems for the
Sun serial console drivers.

It's problematic, furthermore, because even if one could call
add_preferred_console() from a module properly, it doesn't have the
desired effect of changing init's stdin/stdout/stderr

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: some section mismatches on sparc64
  2007-12-29  8:14       ` David Miller
  2007-12-29  8:27         ` David Miller
@ 2007-12-29  8:48         ` Adrian Bunk
  2007-12-29  8:54           ` David Miller
  1 sibling, 1 reply; 146+ messages in thread
From: Adrian Bunk @ 2007-12-29  8:48 UTC (permalink / raw)
  To: David Miller; +Cc: errandir_news, m.kozlowski, akpm, linux-kernel, sparclinux

On Sat, Dec 29, 2007 at 12:14:11AM -0800, David Miller wrote:
> From: Adrian Bunk <bunk@kernel.org>
> Date: Sat, 29 Dec 2007 01:22:56 +0200
> 
> > At least the sunserial_console_match() one is an obvious Oops 
> > (EXPORT_SYMBOL of an __init function).
> > 
> > The comment in the description of
> > commit 58d784a5c754cd66ecd4791222162504d3c16c74 the warning was bogus    
> > is bullshit.
> > 
> > I'm not sure whether this might count as a 2.6.24-rc regression or 
> > whether 2.6.23 is simply differently but similarly broken (does anyone 
> > actually use the Sun console drivers modular?).
> 
> You can't do that, the FOO_CONSOLE config options depend upon
> FOO=y.

Looking closer, the problem aren't the FOO_CONSOLE options themselves, 
the problem is that with FOO_CONSOLE=n sunserial_console_match() still 
gets called.

> That's why I'm not worried about this issue and it's not critical at
> all.

If a module calls sunserial_console_match() that's an Oops.

I removed the EXPORT_SYMBOL(sunserial_console_match), and this is the 
result:
  MODPOST 136 modules
ERROR: "sunserial_console_match" [drivers/serial/sunzilog.ko] undefined!
ERROR: "sunserial_console_match" [drivers/serial/sunsu.ko] undefined!
ERROR: "sunserial_console_match" [drivers/serial/sunsab.ko] undefined!

-ENOHARDWARE, but looking at the code you could call me _very_ surprised 
if you manage to load a modular sunsab from 2.6.24-rc6 on a machine with 
the hardware without getting an Oops.

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: some section mismatches on sparc64
  2007-12-29  8:48         ` Adrian Bunk
@ 2007-12-29  8:54           ` David Miller
  2007-12-29  9:06             ` Adrian Bunk
  2007-12-29  9:15             ` David Miller
  0 siblings, 2 replies; 146+ messages in thread
From: David Miller @ 2007-12-29  8:54 UTC (permalink / raw)
  To: bunk; +Cc: errandir_news, m.kozlowski, akpm, linux-kernel, sparclinux

From: Adrian Bunk <bunk@kernel.org>
Date: Sat, 29 Dec 2007 10:48:46 +0200

> On Sat, Dec 29, 2007 at 12:14:11AM -0800, David Miller wrote:
> > That's why I'm not worried about this issue and it's not critical at
> > all.
> 
> If a module calls sunserial_console_match() that's an Oops.

That's true.

I'm trying to figure out a way to fix this.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: some section mismatches on sparc64
  2007-12-29  8:54           ` David Miller
@ 2007-12-29  9:06             ` Adrian Bunk
  2007-12-29  9:18               ` David Miller
  2007-12-29  9:15             ` David Miller
  1 sibling, 1 reply; 146+ messages in thread
From: Adrian Bunk @ 2007-12-29  9:06 UTC (permalink / raw)
  To: David Miller; +Cc: errandir_news, m.kozlowski, akpm, linux-kernel, sparclinux

On Sat, Dec 29, 2007 at 12:54:08AM -0800, David Miller wrote:
> From: Adrian Bunk <bunk@kernel.org>
> Date: Sat, 29 Dec 2007 10:48:46 +0200
> 
> > On Sat, Dec 29, 2007 at 12:14:11AM -0800, David Miller wrote:
> > > That's why I'm not worried about this issue and it's not critical at
> > > all.
> > 
> > If a module calls sunserial_console_match() that's an Oops.
> 
> That's true.
> 
> I'm trying to figure out a way to fix this.

#ifdef FOO_CONSOLE around the sunserial_console_match() calls in the  
drivers should work.

If you consider this too many #ifdef's, an alternative solution would be 
doing the following in drivers/serial/suncore.h:

#ifndef MODULE
extern int sunserial_console_match(struct console *, struct device_node *,
                                   struct uart_driver *, int);
#else
static inline int sunserial_console_match(struct console *, struct device_node *,
                                          struct uart_driver *, int);
{ return 0; }
#endif

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: some section mismatches on sparc64
  2007-12-29  8:54           ` David Miller
  2007-12-29  9:06             ` Adrian Bunk
@ 2007-12-29  9:15             ` David Miller
  1 sibling, 0 replies; 146+ messages in thread
From: David Miller @ 2007-12-29  9:15 UTC (permalink / raw)
  To: bunk; +Cc: errandir_news, m.kozlowski, akpm, linux-kernel, sparclinux

From: David Miller <davem@davemloft.net>
Date: Sat, 29 Dec 2007 00:54:08 -0800 (PST)

> From: Adrian Bunk <bunk@kernel.org>
> Date: Sat, 29 Dec 2007 10:48:46 +0200
> 
> > On Sat, Dec 29, 2007 at 12:14:11AM -0800, David Miller wrote:
> > > That's why I'm not worried about this issue and it's not critical at
> > > all.
> > 
> > If a module calls sunserial_console_match() that's an Oops.
> 
> That's true.
> 
> I'm trying to figure out a way to fix this.

At the end of this email is one idea I came up with but it still
results in:

WARNING: vmlinux.o(.text+0x19e52c): Section mismatch: reference to .init.text:sunserial_console_match (between 'hv_probe' and 'sunzilog_get_mctrl')
WARNING: vmlinux.o(.text+0x19fd1c): Section mismatch: reference to .init.text:sunserial_console_match (between 'zs_probe' and 'serial_in')
WARNING: vmlinux.o(.text+0x19fd5c): Section mismatch: reference to .init.text:sunserial_console_match (between 'zs_probe' and 'serial_in')
WARNING: vmlinux.o(.text+0x1a19e0): Section mismatch: reference to .init.text:sunserial_console_match (between 'su_probe' and 'sunsu_console_putchar')
WARNING: vmlinux.o(.text+0x1a307c): Section mismatch: reference to .init.text:sunserial_console_match (between 'sab_probe' and 'sunsab_send_xchar')
WARNING: vmlinux.o(.text+0x1a3090): Section mismatch: reference to .init.text:sunserial_console_match (between 'sab_probe' and 'sunsab_send_xchar')
WARNING: vmlinux.o(.sun4v_2insn_patch+0x4f8): Section mismatch: reference to .init.text:

if CONFIG_HOTPLUG is set because driver initialization code has to be
marked with __devinit and with HOTPLUG that isn't __init.

This means it's impossible to call add_preferred_console() (either
directly or indirectly via a helper like sunserial_console_match())
from a driver init routine.

The only way I can think of to "work around" this is to mark
sunserial_console_match() as __init_refok, and use some static
variable in suncore which starts as "0" gets set to "1" via a
late_initcall() to block the call to add_preferred_console().

But that's just gross.

Probably the thing to do to untangle this is to make
add_preferred_console() not be __init.  I just tested and that seems
to make everything happy.  Again, below is the first thing I
tried just for reference.

diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index 707c5b0..a4cbd17 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -21,6 +21,8 @@
 
 #include <asm/prom.h>
 
+#define SUNCORE_CONSOLE
+
 #include "suncore.h"
 
 static int sunserial_current_minor = 64;
@@ -52,8 +54,9 @@ void sunserial_unregister_minors(struct uart_driver *drv, int count)
 }
 EXPORT_SYMBOL(sunserial_unregister_minors);
 
-int __init sunserial_console_match(struct console *con, struct device_node *dp,
-			    struct uart_driver *drv, int line)
+int __init sunserial_console_match(struct console *con,
+				   struct device_node *dp,
+				   struct uart_driver *drv, int line)
 {
 	int off;
 
@@ -74,7 +77,6 @@ int __init sunserial_console_match(struct console *con, struct device_node *dp,
 
 	return 1;
 }
-EXPORT_SYMBOL(sunserial_console_match);
 
 void
 sunserial_console_termios(struct console *con)
diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h
index 042668a..de4dfb0 100644
--- a/drivers/serial/suncore.h
+++ b/drivers/serial/suncore.h
@@ -25,8 +25,17 @@ extern int suncore_mouse_baud_detection(unsigned char, int);
 extern int sunserial_register_minors(struct uart_driver *, int);
 extern void sunserial_unregister_minors(struct uart_driver *, int);
 
+#ifdef SUNCORE_CONSOLE
 extern int sunserial_console_match(struct console *, struct device_node *,
 				   struct uart_driver *, int);
 extern void sunserial_console_termios(struct console *);
+#else
+static inline int sunserial_console_match(struct console *con,
+					  struct device_node *dp,
+					  struct uart_driver *drv, int line)
+{
+	return 0;
+}
+#endif
 
 #endif /* !(_SERIAL_SUN_H) */
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index be0fe15..67a0b4c 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -24,6 +24,8 @@
 #include <asm/of_device.h>
 #include <asm/irq.h>
 
+#define SUNCORE_CONSOLE
+
 #if defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
 #endif
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 543f937..955d54b 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -38,9 +38,12 @@
 #include <asm/prom.h>
 #include <asm/of_device.h>
 
-#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
+#define SUNCORE_CONSOLE
+#ifdef CONFIG_MAGIC_SYSRQ
 #define SUPPORT_SYSRQ
 #endif
+#endif
 
 #include <linux/serial_core.h>
 
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 4e2302d..cbd97eb 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -41,9 +41,12 @@
 #include <asm/prom.h>
 #include <asm/of_device.h>
 
-#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#ifdef CONFIG_SERIAL_SUNSU_CONSOLE
+#define SUNCORE_CONSOLE
+#ifdef CONFIG_MAGIC_SYSRQ
 #define SUPPORT_SYSRQ
 #endif
+#endif
 
 #include <linux/serial_core.h>
 
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index cb2e405..d18d145 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -38,9 +38,12 @@
 #include <asm/prom.h>
 #include <asm/of_device.h>
 
-#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE
+#define SUNCORE_CONSOLE
+#ifdef CONFIG_MAGIC_SYSRQ
 #define SUPPORT_SYSRQ
 #endif
+#endif
 
 #include <linux/serial_core.h>
 


^ permalink raw reply related	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: some section mismatches on sparc64
  2007-12-29  9:06             ` Adrian Bunk
@ 2007-12-29  9:18               ` David Miller
  2007-12-29  9:53                 ` Adrian Bunk
  0 siblings, 1 reply; 146+ messages in thread
From: David Miller @ 2007-12-29  9:18 UTC (permalink / raw)
  To: bunk; +Cc: errandir_news, m.kozlowski, akpm, linux-kernel, sparclinux

From: Adrian Bunk <bunk@kernel.org>
Date: Sat, 29 Dec 2007 11:06:19 +0200

> On Sat, Dec 29, 2007 at 12:54:08AM -0800, David Miller wrote:
> > From: Adrian Bunk <bunk@kernel.org>
> > Date: Sat, 29 Dec 2007 10:48:46 +0200
> > 
> > > On Sat, Dec 29, 2007 at 12:14:11AM -0800, David Miller wrote:
> > > > That's why I'm not worried about this issue and it's not critical at
> > > > all.
> > > 
> > > If a module calls sunserial_console_match() that's an Oops.
> > 
> > That's true.
> > 
> > I'm trying to figure out a way to fix this.
> 
> #ifdef FOO_CONSOLE around the sunserial_console_match() calls in the  
> drivers should work.

It absolutely doesn't work, I tried this, see my other reply.

The issue is add_preferred_console() is __init, driver probe calls are
__devinit which are either __init or not __init.

So even with the FOO_CONSOLE ifdef (or something similar like the
patch I posted) we'll still get section mismatch warnings.

> If you consider this too many #ifdef's, an alternative solution would be 
> doing the following in drivers/serial/suncore.h:
> 
> #ifndef MODULE
> extern int sunserial_console_match(struct console *, struct device_node *,
>                                    struct uart_driver *, int);
> #else
> static inline int sunserial_console_match(struct console *, struct device_node *,
>                                           struct uart_driver *, int);
> { return 0; }
> #endif

Just removing the __init tag from add_preferred_console() (and
subsequently sunserial_console_match()) is probably the easiest way to
fix all of this.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: some section mismatches on sparc64
  2007-12-29  9:18               ` David Miller
@ 2007-12-29  9:53                 ` Adrian Bunk
  0 siblings, 0 replies; 146+ messages in thread
From: Adrian Bunk @ 2007-12-29  9:53 UTC (permalink / raw)
  To: David Miller; +Cc: errandir_news, m.kozlowski, akpm, linux-kernel, sparclinux

On Sat, Dec 29, 2007 at 01:18:02AM -0800, David Miller wrote:
> From: Adrian Bunk <bunk@kernel.org>
> Date: Sat, 29 Dec 2007 11:06:19 +0200
> 
> > On Sat, Dec 29, 2007 at 12:54:08AM -0800, David Miller wrote:
> > > From: Adrian Bunk <bunk@kernel.org>
> > > Date: Sat, 29 Dec 2007 10:48:46 +0200
> > > 
> > > > On Sat, Dec 29, 2007 at 12:14:11AM -0800, David Miller wrote:
> > > > > That's why I'm not worried about this issue and it's not critical at
> > > > > all.
> > > > 
> > > > If a module calls sunserial_console_match() that's an Oops.
> > > 
> > > That's true.
> > > 
> > > I'm trying to figure out a way to fix this.
> > 
> > #ifdef FOO_CONSOLE around the sunserial_console_match() calls in the  
> > drivers should work.
> 
> It absolutely doesn't work, I tried this, see my other reply.
> 
> The issue is add_preferred_console() is __init, driver probe calls are
> __devinit which are either __init or not __init.
> 
> So even with the FOO_CONSOLE ifdef (or something similar like the
> patch I posted) we'll still get section mismatch warnings.
>...

Sorry, I shouldn't suggest stuff I haven't tried myself... :-(

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 - crash in tick_sched_timer/update_process_times
  2007-12-27 17:54 ` 2.6.24-rc6-mm1 - crash in tick_sched_timer/update_process_times Valdis.Kletnieks
  2007-12-28  7:34   ` Andrew Morton
@ 2007-12-29 16:02   ` Valdis.Kletnieks
  1 sibling, 0 replies; 146+ messages in thread
From: Valdis.Kletnieks @ 2007-12-29 16:02 UTC (permalink / raw)
  To: tglx, mingo, hpa; +Cc: Andrew Morton, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3997 bytes --]

On Thu, 27 Dec 2007 12:54:34 EST, Valdis.Kletnieks@vt.edu said:

> [15345.901919] Unable to handle kernel paging request at 000000af008c00cd RIP:
> [15345.901934]  [<ffffffff802310d9>] scheduler_tick+0xdb/0x1c4
> [15345.901952] PGD 0
> [15345.901959] Oops: 0000 [1] PREEMPT SMP
> [15345.901972] last sysfs file: /sys/devices/platform/coretemp.1/temp1_input
> [15345.901978] CPU 1
> [15345.901984] Modules linked in: irnet ppp_generic slhc irtty_sir sir_dev ircomm_tty ircomm irda crc_ccitt coretemp nf_conntrack_ftp xt_pkttype ipt_REJECT ipt_osf nf_conntrack_ipv4 xt_ipisforif ipt_recent ipt_LOG xt_u32 iptable_filter ip_tables xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6t_LOG xt_limit ip6table_filter ip6_tables x_tables sha256_generic aes_generic acpi_cpufreq tpm_tis pcmcia gspca(U) iwl3945 firmware_class iTCO_wdt yenta_socket compat_ioctl32 ohci1394 rsrc_nonstatic iTCO_vendor_support mac80211 ieee1394 pcmcia_core nvidia(P)(U) watchdog_core battery videodev ac watchdog_dev v4l2_common snd_hda_intel v4l1_compat thermal power_supply cfg80211 button intel_agp processor rtc
> [15345.902170] Pid: 0, comm: Eterm Tainted: P        2.6.24-rc6-mm1 #4
> [15345.902176] RIP: 0010:[<ffffffff802310d9>]  [<ffffffff802310d9>] scheduler_tick+0xdb/0x1c4
> [15345.902189] RSP: 0018:ffff81007f8a3eb8  EFLAGS: 00010083
> [15345.902195] RAX: 000000af008c005d RBX: 00000df4fefac7d9 RCX: 0000000000000004
> [15345.902202] RDX: 0000000000000004 RSI: ffff81007e405600 RDI: ffff810001011180
> [15345.902208] RBP: ffff81007f8a3ed8 R08: 0000000000000010 R09: 0000000000000001
> [15345.902214] R10: ffff8100808f4000 R11: ffffffff8071d180 R12: ffff810001011180
> [15345.902219] R13: 0000000000000001 R14: ffff81007e405600 R15: 0000000000000001
> [15345.902226] FS:  0000000000000000(0000) GS:ffff81007f86f9c0(0063) knlGS:00000000f7dab6c0
> [15345.902233] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
> [15345.902238] CR2: 000000af008c00cd CR3: 00000000766c8000 CR4: 00000000000006e0
> [15345.902244] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [15345.902249] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [15345.902256] Process Eterm (pid: 0, threadinfo 4394404dffffffff, task ffff81007e405600)
> [15345.902261] Stack:  0000000000000001 0000000000000000 ffff81007e405600 00000c71d7bbe7da
> [15345.902279]  ffff81007f8a3f08 ffffffff8023f913 ffff81007f8a3f08 ffff81000100e060
> [15345.902293]  ffff810077161b08 ffff81000100df60 ffff81007f8a3f38 ffffffff80251b7d
> [15345.902306] Call Trace:
> [15345.902312]  <IRQ>  [<ffffffff8023f913>] update_process_times+0x4a/0x5b
> [15345.902334]  [<ffffffff80251b7d>] tick_sched_timer+0x8e/0xcb
> [15345.902345]  [<ffffffff8024ce2c>] hrtimer_interrupt+0x111/0x1a1
> [15345.902357]  [<ffffffff8022733e>] ia32_setup_frame+0xb5/0x1b7
> [15345.902367]  [<ffffffff8021f174>] smp_apic_timer_interrupt+0x86/0xa6
> [15345.902377]  [<ffffffff8020cca6>] apic_timer_interrupt+0x66/0x70
> [15345.902383]  <EOI>
> [15345.902389]
> [15345.902390] Code: ff 50 70 4c 89 e7 e8 4a 2d 2f 00 44 89 ef e8 85 9f ff ff 41
> [15345.902445] RIP  [<ffffffff802310d9>] scheduler_tick+0xdb/0x1c4
> [15345.902455]  RSP <ffff81007f8a3eb8>
> [15345.902461] CR2: 000000af008c00cd

In case it makes a difference, the Eterm that causes the issue on exit is
a 32-bit binary, with a 64-bit kernel (though I did have one kernel lockup
with xpdf, which is a 64-bit binary, but I can't prove that was/wasn't this
same issue)....

Bisection says:

git-ipwireless_cs.patch GOOD
#
git-x86.patch
git-x86-fixup.patch
git-x86-arch-x86-math-emu-errorsc-fix-printk-warnings.patch
git-x86-drivers-pnp-pnpbios-bioscallsc-build-fix.patch
git-x86-fix-doubly-merged-patch.patch
git-x86-export-leave_mm.patch   BAD

and that's where bisection comes to a halt...

Time to bisect through git-x86, or somebody got a better idea?  Looking at
the commits listed in git-x86.patch, I didn't see anything that jumped out,
but I'm pretty sure the problem is in there somewhere...

[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-28 23:07     ` 2.6.24-rc6-mm1 Andrew Morton
@ 2007-12-29 16:51       ` Torsten Kaiser
  2007-12-30  1:30         ` 2.6.24-rc6-mm1 Herbert Xu
  2007-12-30 21:24       ` 2.6.24-rc6-mm1 J. Bruce Fields
  1 sibling, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2007-12-29 16:51 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-kernel, Neil Brown, J. Bruce Fields, netdev, Herbert Xu

On Dec 29, 2007 12:07 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
> On Fri, 28 Dec 2007 23:53:49 +0100 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > On Dec 23, 2007 5:27 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
[snip]
> > [ 7620.708561] Pid: 5698, comm: nfsv4-svc Not tainted 2.6.24-rc3-mm2 #2
[snip]
> That looks like a sunrpc bug.  git-nfsd has bene mucking around in there a
> bit.

Please note, that this report is still against 2.6.24-rc3-mm2. The
only new thing about that was, that slub_debug=FZP does not catch the
cause...

> > The cause, why I am resending this: I just got a crash with
> > 2.6.24-rc6-mm1, again looking network related:
> >
> > [93436.933356] WARNING: at include/net/dst.h:165 dst_release()
> > [93436.936685] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
> > [93436.939292]
> > [93436.939293] Call Trace:
> > [93436.939304]  [<ffffffff80531d2d>] skb_release_all+0xdd/0x110
> > [93436.939307]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
> > [93436.939309]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
> > [93436.939312]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
> > [93436.939315]  [<ffffffff805a0c91>] unix_release+0x21/0x30
> > [93436.939318]  [<ffffffff8052b144>] sock_release+0x24/0x90
> > [93436.939320]  [<ffffffff8052b656>] sock_close+0x26/0x50
> > [93436.939324]  [<ffffffff8029f921>] __fput+0xc1/0x230
> > [93436.939327]  [<ffffffff8029fe46>] fput+0x16/0x20
> > [93436.939329]  [<ffffffff8029c576>] filp_close+0x56/0x90
> > [93436.939331]  [<ffffffff8029de46>] sys_close+0xa6/0x110
> > [93436.939335]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80

>From code inspection I would blame the patch "[SKBUFF]: Free old skb
properly in skb_morph" from Herbert Xu. (CC added)

Mostly it only shuffles code around, the only real change seems to be this hunk:
@@ -441,7 +446,7 @@ static struct sk_buff *__skb_clone(struct sk_buff
*n, struct sk_buff *skb)
  */
 struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src)
 {
-	skb_release_data(dst);
+	skb_release_all(dst);
 	return __skb_clone(dst, src);
 }
 EXPORT_SYMBOL_GPL(skb_morph);

Using sbk_release_all instead only skb_release_data (with is called
automatically from the new sbk_release_all) will add a new call to
dst_release(skb->dst); (first line in sbk_release_all)
Could that explain the above underflow warning?

(I do not have any clue about the inner workings of the network core,
I just looked for code changes, that might be relevant...)

> > [93436.947241] general protection fault: 0000 [1] SMP
> > [93436.947243] last sysfs file:
> > /sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.1/irq
> > [93436.947245] CPU 1
> > [93436.947246] Modules linked in: radeon drm nfsd exportfs w83792d
> > ipv6 tuner tea5767 tda8290 tuner_xc2028 tda9887 tuner_simple mt20xx
> > tea5761 tvaudio msp3400 bttv ir_common compat_ioctl32 videobuf_dma_sg
> > videobuf_core btcx_risc tveeprom usbhid videodev v4l2_common hid
> > v4l1_compat pata_amd sg i2c_nforce2
> > [93436.947257] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
> > [93436.947259] RIP: 0010:[<ffffffff80531438>]  [<ffffffff80531438>]
> > skb_drop_list+0x18/0x30
> > [93436.947262] RSP: 0018:ffff810005f4fda8  EFLAGS: 00010286
> > [93436.947263] RAX: ab1ed5ca5b74e7de RBX: ab1ed5ca5b74e7de RCX: 000000000000d135
> > [93436.947265] RDX: ffff81011d089a80 RSI: 0000000000000001 RDI: ffff81011d089a88
> > [93436.947266] RBP: ffff810005f4fdb8 R08: 0000000000000001 R09: 0000000000000006
> > [93436.947268] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8100de02c500
> > [93436.947269] R13: ffff81011c188a00 R14: 0000000000000001 R15: ffff81011c189198
> > [93436.947271] FS:  00007fb5bde0d700(0000) GS:ffff81007ff22000(0000)
> > knlGS:0000000000000000
> > [93436.947273] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> > [93436.947274] CR2: 00007fb5bdd76000 CR3: 00000000664d5000 CR4: 00000000000006e0
> > [93436.947276] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > [93436.947277] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > [93436.947279] Process konqueror (pid: 8079, threadinfo
> > ffff810005f4e000, task ffff8100a1dec000)
> > [93436.947281] Stack:  ffff810005f4fdd8 ffff810116c86140
> > ffff810005f4fdd8 ffffffff805314ae
> > [93436.947284]  ffff810116c86140 ffff8100de02c500 ffff810005f4fdf8
> > ffffffff80531cf0
> > [93436.947286]  ffff8100de02c500 ffff81011c188b48 ffff810005f4fe18
> > ffffffff80531311
> > [93436.947288] Call Trace:
> > [93436.947290]  [<ffffffff805314ae>] skb_release_data+0x5e/0xa0
> > [93436.947293]  [<ffffffff80531cf0>] skb_release_all+0xa0/0x110
> > [93436.947295]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
> > [93436.947297]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
> > [93436.947299]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
> > [93436.947302]  [<ffffffff805a0c91>] unix_release+0x21/0x30
> > [93436.947304]  [<ffffffff8052b144>] sock_release+0x24/0x90
> > [93436.947307]  [<ffffffff8052b656>] sock_close+0x26/0x50
> > [93436.947309]  [<ffffffff8029f921>] __fput+0xc1/0x230
> > [93436.947312]  [<ffffffff8029fe46>] fput+0x16/0x20
> > [93436.947314]  [<ffffffff8029c576>] filp_close+0x56/0x90
> > [93436.947316]  [<ffffffff8029de46>] sys_close+0xa6/0x110
> > [93436.947319]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
> > [93436.947322]
> > [93436.947322]
> > [93436.947323] Code: 48 8b 18 48 89 c7 e8 5d ff ff ff 48 85 db 75 ed
> > 48 83 c4 08
> > [93436.947328] RIP  [<ffffffff80531438>] skb_drop_list+0x18/0x30
> > [93436.947330]  RSP <ffff810005f4fda8>
> > [93436.947332] ---[ end trace befb7cc3528ab3b1 ]---
>
> Yes, that looks more networking-related.

I would hope this OOPS was caused by the same error, trying to release
the same list twice.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-29 16:51       ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2007-12-30  1:30         ` Herbert Xu
  2007-12-30  3:34           ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 1 reply; 146+ messages in thread
From: Herbert Xu @ 2007-12-30  1:30 UTC (permalink / raw)
  To: Torsten Kaiser
  Cc: Andrew Morton, linux-kernel, Neil Brown, J. Bruce Fields, netdev

On Sat, Dec 29, 2007 at 05:51:13PM +0100, Torsten Kaiser wrote:
>
> > > The cause, why I am resending this: I just got a crash with
> > > 2.6.24-rc6-mm1, again looking network related:
> > >
> > > [93436.933356] WARNING: at include/net/dst.h:165 dst_release()
> > > [93436.936685] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
> > > [93436.939292]
> > > [93436.939293] Call Trace:
> > > [93436.939304]  [<ffffffff80531d2d>] skb_release_all+0xdd/0x110
> > > [93436.939307]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
> > > [93436.939309]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
> > > [93436.939312]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
> > > [93436.939315]  [<ffffffff805a0c91>] unix_release+0x21/0x30
> > > [93436.939318]  [<ffffffff8052b144>] sock_release+0x24/0x90
> > > [93436.939320]  [<ffffffff8052b656>] sock_close+0x26/0x50
> > > [93436.939324]  [<ffffffff8029f921>] __fput+0xc1/0x230
> > > [93436.939327]  [<ffffffff8029fe46>] fput+0x16/0x20
> > > [93436.939329]  [<ffffffff8029c576>] filp_close+0x56/0x90
> > > [93436.939331]  [<ffffffff8029de46>] sys_close+0xa6/0x110
> > > [93436.939335]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
> 
> >From code inspection I would blame the patch "[SKBUFF]: Free old skb
> properly in skb_morph" from Herbert Xu. (CC added)

I doubt it.  skb_morph is only used on IP fragments so I don't see how
you could attribute an error from a Unix domain socket to this patch.

In any case, Unix socket packets should not have a dst at all so the
very fact that you're in that path means that you have some sort of
memory corruption.

Is this the very first OOPS/warning that you see? If not you should
ignore all but the very first one as that may have left your system
in an inconsistent state which may render all subsequent OOPSes and
warnings useless.

Cheers,
-- 
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-30  1:30         ` 2.6.24-rc6-mm1 Herbert Xu
@ 2007-12-30  3:34           ` Torsten Kaiser
  2007-12-30  5:41             ` 2.6.24-rc6-mm1 Randy Dunlap
  2007-12-31 20:15             ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 2 replies; 146+ messages in thread
From: Torsten Kaiser @ 2007-12-30  3:34 UTC (permalink / raw)
  To: Herbert Xu
  Cc: Andrew Morton, linux-kernel, Neil Brown, J. Bruce Fields, netdev

On Dec 30, 2007 2:30 AM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
> On Sat, Dec 29, 2007 at 05:51:13PM +0100, Torsten Kaiser wrote:
> >
> > > > The cause, why I am resending this: I just got a crash with
> > > > 2.6.24-rc6-mm1, again looking network related:
> > > >
> > > > [93436.933356] WARNING: at include/net/dst.h:165 dst_release()
> > > > [93436.936685] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
> > > > [93436.939292]
> > > > [93436.939293] Call Trace:
> > > > [93436.939304]  [<ffffffff80531d2d>] skb_release_all+0xdd/0x110
> > > > [93436.939307]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
> > > > [93436.939309]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
> > > > [93436.939312]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
> > > > [93436.939315]  [<ffffffff805a0c91>] unix_release+0x21/0x30
> > > > [93436.939318]  [<ffffffff8052b144>] sock_release+0x24/0x90
> > > > [93436.939320]  [<ffffffff8052b656>] sock_close+0x26/0x50
> > > > [93436.939324]  [<ffffffff8029f921>] __fput+0xc1/0x230
> > > > [93436.939327]  [<ffffffff8029fe46>] fput+0x16/0x20
> > > > [93436.939329]  [<ffffffff8029c576>] filp_close+0x56/0x90
> > > > [93436.939331]  [<ffffffff8029de46>] sys_close+0xa6/0x110
> > > > [93436.939335]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
> >
> > >From code inspection I would blame the patch "[SKBUFF]: Free old skb
> > properly in skb_morph" from Herbert Xu. (CC added)
>
> I doubt it.  skb_morph is only used on IP fragments so I don't see how
> you could attribute an error from a Unix domain socket to this patch.

That's why I wrote that I do not know much about the network core...

> In any case, Unix socket packets should not have a dst at all so the
> very fact that you're in that path means that you have some sort of
> memory corruption.

... I did not know about the fact that there should not have been an dst.

Its just that this warning was the first nice clue about the memory
corruption related to networking that I see since 2.6.24-rc3-mm2.
The time of the patch (Mon, 26 Nov 2007 15:11:19) even fits into the
window between -rc3-mm1 and -rc3-mm2.

I doubt that the memory corruption is a hardware problem, because the
system in question is using ECC ram and I did not see any messages
about corrected/detected errors.

> Is this the very first OOPS/warning that you see? If not you should
> ignore all but the very first one as that may have left your system
> in an inconsistent state which may render all subsequent OOPSes and
> warnings useless.

I looked into the log in question and the only other warning was a
circular locking dependency that lockdep detected around 1.5 hour
before this warning.

As reported in my original mail immeadeatly after the warning the
system OOPSed and hang:
[93436.947241] general protection fault: 0000 [1] SMP
-> first OOPS
[93436.947243] last sysfs file:
/sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.1/irq
[93436.947245] CPU 1
[93436.947246] Modules linked in: radeon drm nfsd exportfs w83792d
ipv6 tuner tea5767 tda8290 tuner_xc2
028 tda9887 tuner_simple mt20xx tea5761 tvaudio msp3400 bttv ir_common
compat_ioctl32 videobuf_dma_sg v
ideobuf_core btcx_risc tveeprom usbhid videodev v4l2_common hid
v4l1_compat pata_amd sg i2c_nforce2
[93436.947257] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
-> not tainted by a previous OOPS
[93436.947259] RIP: 0010:[<ffffffff80531438>]  [<ffffffff80531438>]
skb_drop_list+0x18/0x30
[93436.947262] RSP: 0018:ffff810005f4fda8  EFLAGS: 00010286
[93436.947263] RAX: ab1ed5ca5b74e7de RBX: ab1ed5ca5b74e7de RCX: 000000000000d135
[93436.947265] RDX: ffff81011d089a80 RSI: 0000000000000001 RDI: ffff81011d089a88
[93436.947266] RBP: ffff810005f4fdb8 R08: 0000000000000001 R09: 0000000000000006
[93436.947268] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8100de02c500
[93436.947269] R13: ffff81011c188a00 R14: 0000000000000001 R15: ffff81011c189198
[93436.947271] FS:  00007fb5bde0d700(0000) GS:ffff81007ff22000(0000)
knlGS:0000000000000000
[93436.947273] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[93436.947274] CR2: 00007fb5bdd76000 CR3: 00000000664d5000 CR4: 00000000000006e0
[93436.947276] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[93436.947277] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[93436.947279] Process konqueror (pid: 8079, threadinfo
ffff810005f4e000, task ffff8100a1dec000)
[93436.947281] Stack:  ffff810005f4fdd8 ffff810116c86140
ffff810005f4fdd8 ffffffff805314ae
[93436.947284]  ffff810116c86140 ffff8100de02c500 ffff810005f4fdf8
ffffffff80531cf0
[93436.947286]  ffff8100de02c500 ffff81011c188b48 ffff810005f4fe18
ffffffff80531311
[93436.947288] Call Trace:
[93436.947290]  [<ffffffff805314ae>] skb_release_data+0x5e/0xa0
[93436.947293]  [<ffffffff80531cf0>] skb_release_all+0xa0/0x110
[93436.947295]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
[93436.947297]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
[93436.947299]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
[93436.947302]  [<ffffffff805a0c91>] unix_release+0x21/0x30
[93436.947304]  [<ffffffff8052b144>] sock_release+0x24/0x90
[93436.947307]  [<ffffffff8052b656>] sock_close+0x26/0x50
[93436.947309]  [<ffffffff8029f921>] __fput+0xc1/0x230
[93436.947312]  [<ffffffff8029fe46>] fput+0x16/0x20
[93436.947314]  [<ffffffff8029c576>] filp_close+0x56/0x90
[93436.947316]  [<ffffffff8029de46>] sys_close+0xa6/0x110
[93436.947319]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
[93436.947322]
[93436.947322]
[93436.947323] Code: 48 8b 18 48 89 c7 e8 5d ff ff ff 48 85 db 75 ed 48 83 c4 08
[93436.947328] RIP  [<ffffffff80531438>] skb_drop_list+0x18/0x30
[93436.947330]  RSP <ffff810005f4fda8>
[93436.947332] ---[ end trace befb7cc3528ab3b1 ]---

Your patch just fit so "good" to my problems:
* it had the correct time frame for 2.6.24-rc3-mm2
* it looked guilty at changing the refcounting of __refcnt because of
the added dst_release()
* it added other release / freeing operations so that a use-after-free
memory corruption seemed possible

I just have no better idea to what caused this OOPS and the other
hangs in -rc3-mm2.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-30  3:34           ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2007-12-30  5:41             ` Randy Dunlap
  2007-12-31 20:15             ` 2.6.24-rc6-mm1 Torsten Kaiser
  1 sibling, 0 replies; 146+ messages in thread
From: Randy Dunlap @ 2007-12-30  5:41 UTC (permalink / raw)
  To: Torsten Kaiser
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev

On Sun, 30 Dec 2007 04:34:36 +0100 Torsten Kaiser wrote:

> On Dec 30, 2007 2:30 AM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
> > On Sat, Dec 29, 2007 at 05:51:13PM +0100, Torsten Kaiser wrote:
> > >
> > > > > The cause, why I am resending this: I just got a crash with
> > > > > 2.6.24-rc6-mm1, again looking network related:
> > > > >
> > > > > [93436.933356] WARNING: at include/net/dst.h:165 dst_release()
> > > > > [93436.936685] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
> > > > > [93436.939292]
> > > > > [93436.939293] Call Trace:
> > > > > [93436.939304]  [<ffffffff80531d2d>] skb_release_all+0xdd/0x110
> > > > > [93436.939307]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
> > > > > [93436.939309]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
> > > > > [93436.939312]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
> > > > > [93436.939315]  [<ffffffff805a0c91>] unix_release+0x21/0x30
> > > > > [93436.939318]  [<ffffffff8052b144>] sock_release+0x24/0x90
> > > > > [93436.939320]  [<ffffffff8052b656>] sock_close+0x26/0x50
> > > > > [93436.939324]  [<ffffffff8029f921>] __fput+0xc1/0x230
> > > > > [93436.939327]  [<ffffffff8029fe46>] fput+0x16/0x20
> > > > > [93436.939329]  [<ffffffff8029c576>] filp_close+0x56/0x90
> > > > > [93436.939331]  [<ffffffff8029de46>] sys_close+0xa6/0x110
> > > > > [93436.939335]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
> > >
> > > >From code inspection I would blame the patch "[SKBUFF]: Free old skb
> > > properly in skb_morph" from Herbert Xu. (CC added)
> >
> > I doubt it.  skb_morph is only used on IP fragments so I don't see how
> > you could attribute an error from a Unix domain socket to this patch.
> 
> That's why I wrote that I do not know much about the network core...
> 
> > In any case, Unix socket packets should not have a dst at all so the
> > very fact that you're in that path means that you have some sort of
> > memory corruption.
> 
> ... I did not know about the fact that there should not have been an dst.
> 
> Its just that this warning was the first nice clue about the memory
> corruption related to networking that I see since 2.6.24-rc3-mm2.
> The time of the patch (Mon, 26 Nov 2007 15:11:19) even fits into the
> window between -rc3-mm1 and -rc3-mm2.
> 
> I doubt that the memory corruption is a hardware problem, because the
> system in question is using ECC ram and I did not see any messages
> about corrected/detected errors.
> 
> > Is this the very first OOPS/warning that you see? If not you should
> > ignore all but the very first one as that may have left your system
> > in an inconsistent state which may render all subsequent OOPSes and
> > warnings useless.
> 
> I looked into the log in question and the only other warning was a
> circular locking dependency that lockdep detected around 1.5 hour
> before this warning.
> 
> As reported in my original mail immeadeatly after the warning the
> system OOPSed and hang:
> [93436.947241] general protection fault: 0000 [1] SMP
> -> first OOPS                                  ^
	FYI, that's what this counter is... -----^

> [93436.947243] last sysfs file:
> /sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.1/irq
> [93436.947245] CPU 1
> [93436.947246] Modules linked in: radeon drm nfsd exportfs w83792d
> ipv6 tuner tea5767 tda8290 tuner_xc2
> 028 tda9887 tuner_simple mt20xx tea5761 tvaudio msp3400 bttv ir_common
> compat_ioctl32 videobuf_dma_sg v
> ideobuf_core btcx_risc tveeprom usbhid videodev v4l2_common hid
> v4l1_compat pata_amd sg i2c_nforce2
> [93436.947257] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
> -> not tainted by a previous OOPS
> [93436.947259] RIP: 0010:[<ffffffff80531438>]  [<ffffffff80531438>]
> skb_drop_list+0x18/0x30
> [93436.947262] RSP: 0018:ffff810005f4fda8  EFLAGS: 00010286
> [93436.947263] RAX: ab1ed5ca5b74e7de RBX: ab1ed5ca5b74e7de RCX: 000000000000d135
> [93436.947265] RDX: ffff81011d089a80 RSI: 0000000000000001 RDI: ffff81011d089a88
> [93436.947266] RBP: ffff810005f4fdb8 R08: 0000000000000001 R09: 0000000000000006
> [93436.947268] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8100de02c500
> [93436.947269] R13: ffff81011c188a00 R14: 0000000000000001 R15: ffff81011c189198
> [93436.947271] FS:  00007fb5bde0d700(0000) GS:ffff81007ff22000(0000)
> knlGS:0000000000000000
> [93436.947273] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [93436.947274] CR2: 00007fb5bdd76000 CR3: 00000000664d5000 CR4: 00000000000006e0
> [93436.947276] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [93436.947277] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [93436.947279] Process konqueror (pid: 8079, threadinfo
> ffff810005f4e000, task ffff8100a1dec000)
> [93436.947281] Stack:  ffff810005f4fdd8 ffff810116c86140
> ffff810005f4fdd8 ffffffff805314ae
> [93436.947284]  ffff810116c86140 ffff8100de02c500 ffff810005f4fdf8
> ffffffff80531cf0
> [93436.947286]  ffff8100de02c500 ffff81011c188b48 ffff810005f4fe18
> ffffffff80531311
> [93436.947288] Call Trace:
> [93436.947290]  [<ffffffff805314ae>] skb_release_data+0x5e/0xa0
> [93436.947293]  [<ffffffff80531cf0>] skb_release_all+0xa0/0x110
> [93436.947295]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
> [93436.947297]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
> [93436.947299]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
> [93436.947302]  [<ffffffff805a0c91>] unix_release+0x21/0x30
> [93436.947304]  [<ffffffff8052b144>] sock_release+0x24/0x90
> [93436.947307]  [<ffffffff8052b656>] sock_close+0x26/0x50
> [93436.947309]  [<ffffffff8029f921>] __fput+0xc1/0x230
> [93436.947312]  [<ffffffff8029fe46>] fput+0x16/0x20
> [93436.947314]  [<ffffffff8029c576>] filp_close+0x56/0x90
> [93436.947316]  [<ffffffff8029de46>] sys_close+0xa6/0x110
> [93436.947319]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
> [93436.947322]
> [93436.947322]
> [93436.947323] Code: 48 8b 18 48 89 c7 e8 5d ff ff ff 48 85 db 75 ed 48 83 c4 08
> [93436.947328] RIP  [<ffffffff80531438>] skb_drop_list+0x18/0x30
> [93436.947330]  RSP <ffff810005f4fda8>
> [93436.947332] ---[ end trace befb7cc3528ab3b1 ]---
> 
> Your patch just fit so "good" to my problems:
> * it had the correct time frame for 2.6.24-rc3-mm2
> * it looked guilty at changing the refcounting of __refcnt because of
> the added dst_release()
> * it added other release / freeing operations so that a use-after-free
> memory corruption seemed possible
> 
> I just have no better idea to what caused this OOPS and the other
> hangs in -rc3-mm2.

---
~Randy
desserts:  http://www.xenotime.net/linux/recipes/

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-28 23:07     ` 2.6.24-rc6-mm1 Andrew Morton
  2007-12-29 16:51       ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2007-12-30 21:24       ` J. Bruce Fields
  2007-12-30 21:35         ` 2.6.24-rc6-mm1 Torsten Kaiser
  1 sibling, 1 reply; 146+ messages in thread
From: J. Bruce Fields @ 2007-12-30 21:24 UTC (permalink / raw)
  To: Andrew Morton
  Cc: Torsten Kaiser, linux-kernel, Neil Brown, netdev, Tom Tucker

On Fri, Dec 28, 2007 at 03:07:46PM -0800, Andrew Morton wrote:
> On Fri, 28 Dec 2007 23:53:49 +0100 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> 
> > On Dec 23, 2007 5:27 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> > > On Dec 23, 2007 8:30 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
> > > >
> > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> > > I have finally given up on using 2.6.24-rc3-mm2 with slub_debug=FZP to
> > > get more information out of the random crashes I had seen with that
> > > version. (Did not crash once with slub_debug, so no new information on
> > > what the cause was)
> > 
> > Murphy: Just after sending that mail the system crashed two times with
> > slub_debug=FZP, but did not show any new informations.
> > No debug output from slub, only this stacktrace: (Its the same I
> > already reported in the 2.6.24-rc3-mm2 thread)
> > 
> > [ 7620.673012] ------------[ cut here ]------------
> > [ 7620.676291] kernel BUG at lib/list_debug.c:33!
> > [ 7620.679440] invalid opcode: 0000 [1] SMP
> > [ 7620.682319] last sysfs file:
> > /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
> > [ 7620.687845] CPU 0
> > [ 7620.689300] Modules linked in: radeon drm nfsd exportfs w83792d
> > ipv6 tuner tea5767 tda8290 tuner_xc2028 tda9887 tuner_simple mt20xx
> > tea5761 tvaudio msp3400 bttv ir_common compat_ioctl32 videobuf_dma_sg
> > videobuf_core btcx_risc tveeprom videodev usbhid v4l2_common
> > v4l1_compat hid i2c_nforce2 sg pata_amd
> > [ 7620.708561] Pid: 5698, comm: nfsv4-svc Not tainted 2.6.24-rc3-mm2 #2
> > [ 7620.713080] RIP: 0010:[<ffffffff803bae54>]  [<ffffffff803bae54>]
> > __list_add+0x54/0x60
> > [ 7620.718667] RSP: 0018:ffff81011bca1dc0  EFLAGS: 00010282
> > [ 7620.722439] RAX: 0000000000000088 RBX: ffff81011c862c48 RCX: 0000000000000002
> > [ 7620.727504] RDX: ffff81011bc82ef0 RSI: 0000000000000001 RDI: ffffffff807590c0
> > [ 7620.732581] RBP: ffff81011bca1dc0 R08: 0000000000000001 R09: 0000000000000000
> > [ 7620.737658] R10: ffff810080058d48 R11: 0000000000000001 R12: ffff81011ed8d1c8
> > [ 7620.742711] R13: ffff81011ed8d200 R14: ffff81011ed8d200 R15: ffff81011cc0e578
> > [ 7620.747806] FS:  00007ffe400116f0(0000) GS:ffffffff807d4000(0000)
> > knlGS:00000000f73558e0
> > [ 7620.753535] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> > [ 7620.757607] CR2: 00000000017071dc CR3: 00000001188b5000 CR4: 00000000000006e0
> > [ 7620.762677] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > [ 7620.767748] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > [ 7620.772808] Process nfsv4-svc (pid: 5698, threadinfo
> > FFFF81011BCA0000, task FFFF81011BC82EF0)
> > [ 7620.778872] Stack:  ffff81011bca1e00 ffffffff805be26e
> > ffff81011ed8d1d0 ffff81011cc0e578
> > [ 7620.784626]  ffff81011c862c48 ffff81011c8be000 ffff810054a8b060
> > ffff81011cc0e588
> > [ 7620.789913]  ffff81011bca1e10 ffffffff805be367 ffff81011bca1ee0
> > ffffffff805bf0ac
> > [ 7620.795062] Call Trace:
> > [ 7620.796941]  [<ffffffff805be26e>] svc_xprt_enqueue+0x1ae/0x250
> > [ 7620.801087]  [<ffffffff805be367>] svc_xprt_received+0x17/0x20
> > [ 7620.805199]  [<ffffffff805bf0ac>] svc_recv+0x39c/0x840
> > [ 7620.808851]  [<ffffffff805bea3f>] svc_send+0xaf/0xd0
> > [ 7620.812374]  [<ffffffff8022f590>] default_wake_function+0x0/0x10
> > [ 7620.816637]  [<ffffffff803163ea>] nfs_callback_svc+0x7a/0x130
> > [ 7620.820712]  [<ffffffff805cfea2>] trace_hardirqs_on_thunk+0x35/0x3a
> > [ 7620.825174]  [<ffffffff80259f8f>] trace_hardirqs_on+0xbf/0x160
> > [ 7620.829335]  [<ffffffff8020cbc8>] child_rip+0xa/0x12
> > [ 7620.832842]  [<ffffffff8020c2df>] restore_args+0x0/0x30
> > [ 7620.836554]  [<ffffffff80316370>] nfs_callback_svc+0x0/0x130
> > [ 7620.840564]  [<ffffffff8020cbbe>] child_rip+0x0/0x12
> > [ 7620.844102]
> > [ 7620.845168] INFO: lockdep is turned off.
> > [ 7620.847964]
> > [ 7620.847965] Code: 0f 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 8b 16
> > 48 89 e5 e8
> > [ 7620.854334] RIP  [<ffffffff803bae54>] __list_add+0x54/0x60
> > [ 7620.858255]  RSP <ffff81011bca1dc0>
> > [ 7620.860724] Kernel panic - not syncing: Aiee, killing interrupt handler!
> > 
> 
> That looks like a sunrpc bug.  git-nfsd has bene mucking around in there a
> bit.

Can you still reproduce this?  Tom thought there was a chance the
following could fix it.

--b.

From:	Tom Tucker <tom@opengridcomputing.com>
Date:	Sun, 30 Dec 2007 10:07:17 -0600

Bruce/Aime:

Here is what I believe to be the fix for the crashes/svc_xprt BUG_ON
that people are seeing. It would be great if those who have seen this
problem could apply this patch and see if it resolves their problem. 

The common code calls svc_xprt_received on behalf of the transport.
Since the provider was calling it as well, this resulted in clearing the
busy bit/resetting xpt_pool when the BUSY bit wasn't held. 

diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 4628881..4d39db1 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -1272,7 +1272,6 @@ static struct svc_xprt *svc_create_socket(struct svc_serv *serv,
 
 	if ((svsk = svc_setup_socket(serv, sock, &error, flags)) != NULL) {
 		svc_xprt_set_local(&svsk->sk_xprt, newsin, newlen);
-		svc_xprt_received(&svsk->sk_xprt);
 		return (struct svc_xprt *)svsk;
 	}
 

-

^ permalink raw reply related	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-30 21:24       ` 2.6.24-rc6-mm1 J. Bruce Fields
@ 2007-12-30 21:35         ` Torsten Kaiser
  2007-12-31 13:17           ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2007-12-30 21:35 UTC (permalink / raw)
  To: J. Bruce Fields
  Cc: Andrew Morton, linux-kernel, Neil Brown, netdev, Tom Tucker

On Dec 30, 2007 10:24 PM, J. Bruce Fields <bfields@fieldses.org> wrote:
>
> On Fri, Dec 28, 2007 at 03:07:46PM -0800, Andrew Morton wrote:
> > On Fri, 28 Dec 2007 23:53:49 +0100 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> >
> > > On Dec 23, 2007 5:27 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> > > > On Dec 23, 2007 8:30 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
> > > > >
> > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> > > > I have finally given up on using 2.6.24-rc3-mm2 with slub_debug=FZP to
> > > > get more information out of the random crashes I had seen with that
> > > > version. (Did not crash once with slub_debug, so no new information on
> > > > what the cause was)
> > >
> > > Murphy: Just after sending that mail the system crashed two times with
> > > slub_debug=FZP, but did not show any new informations.
> > > No debug output from slub, only this stacktrace: (Its the same I
> > > already reported in the 2.6.24-rc3-mm2 thread)
> > >
[snip]
> > > [ 7620.708561] Pid: 5698, comm: nfsv4-svc Not tainted 2.6.24-rc3-mm2 #2
[snip]
> >
> > That looks like a sunrpc bug.  git-nfsd has bene mucking around in there a
> > bit.
>
> Can you still reproduce this?  Tom thought there was a chance the
> following could fix it.

Please see also http://lkml.org/lkml/2007/12/29/76

Just wanted to say that slub_debug did not help to get more infos.

I will try to reproduce this with rc3-mm2 and the below patch tomorrow.
Without slub_debug this seemed to trigger rather reliable when trying
to update/upgrade packages on my system.

> From:   Tom Tucker <tom@opengridcomputing.com>
> Date:   Sun, 30 Dec 2007 10:07:17 -0600
>
> Bruce/Aime:
>
> Here is what I believe to be the fix for the crashes/svc_xprt BUG_ON
> that people are seeing. It would be great if those who have seen this
> problem could apply this patch and see if it resolves their problem.
>
> The common code calls svc_xprt_received on behalf of the transport.
> Since the provider was calling it as well, this resulted in clearing the
> busy bit/resetting xpt_pool when the BUSY bit wasn't held.
>
> diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
> index 4628881..4d39db1 100644
> --- a/net/sunrpc/svcsock.c
> +++ b/net/sunrpc/svcsock.c
> @@ -1272,7 +1272,6 @@ static struct svc_xprt *svc_create_socket(struct svc_serv *serv,
>
>         if ((svsk = svc_setup_socket(serv, sock, &error, flags)) != NULL) {
>                 svc_xprt_set_local(&svsk->sk_xprt, newsin, newlen);
> -               svc_xprt_received(&svsk->sk_xprt);
>                 return (struct svc_xprt *)svsk;
>         }

I will send a mail, when I'm done with testing this...

Thanks for the patch.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-30 21:35         ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2007-12-31 13:17           ` Torsten Kaiser
  0 siblings, 0 replies; 146+ messages in thread
From: Torsten Kaiser @ 2007-12-31 13:17 UTC (permalink / raw)
  To: J. Bruce Fields
  Cc: Andrew Morton, linux-kernel, Neil Brown, netdev, Tom Tucker

On Dec 30, 2007 10:35 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> On Dec 30, 2007 10:24 PM, J. Bruce Fields <bfields@fieldses.org> wrote:
> > From:   Tom Tucker <tom@opengridcomputing.com>
> > Date:   Sun, 30 Dec 2007 10:07:17 -0600
> >
> > Bruce/Aime:
> >
> > Here is what I believe to be the fix for the crashes/svc_xprt BUG_ON
> > that people are seeing. It would be great if those who have seen this
> > problem could apply this patch and see if it resolves their problem.
> >
> > The common code calls svc_xprt_received on behalf of the transport.
> > Since the provider was calling it as well, this resulted in clearing the
> > busy bit/resetting xpt_pool when the BUSY bit wasn't held.
> >
> > diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
> > index 4628881..4d39db1 100644
> > --- a/net/sunrpc/svcsock.c
> > +++ b/net/sunrpc/svcsock.c
> > @@ -1272,7 +1272,6 @@ static struct svc_xprt *svc_create_socket(struct svc_serv *serv,
> >
> >         if ((svsk = svc_setup_socket(serv, sock, &error, flags)) != NULL) {
> >                 svc_xprt_set_local(&svsk->sk_xprt, newsin, newlen);
> > -               svc_xprt_received(&svsk->sk_xprt);
> >                 return (struct svc_xprt *)svsk;
> >         }
>
> I will send a mail, when I'm done with testing this...

Removing this line from 2.6.24-rc3-mm2 does not solve my crash
FYI the codepart from net/sunrpc/svcsock.c / svc_create_socket() where
I removed this:
        if (protocol == IPPROTO_TCP) {
                if ((error = kernel_listen(sock, 64)) < 0)
                        goto bummer;
        }

        if ((svsk = svc_setup_socket(serv, sock, &error, flags)) != NULL) {
                memcpy(&svsk->sk_xprt.xpt_local, newsin, newlen);
                //svc_xprt_received(&svsk->sk_xprt);
                return (struct svc_xprt *)svsk;
        }

bummer:
        dprintk("svc: svc_create_socket error = %d\n", -error);


The crash itself:
[11166.565362] ------------[ cut here ]------------
[11166.568595] kernel BUG at lib/list_debug.c:33!
[11166.571696] invalid opcode: 0000 [1] SMP
[11166.574527] last sysfs file:
/sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
[11166.580017] CPU 3
[11166.581442] Modules linked in: radeon drm nfsd exportfs w83792d
ipv6 tuner tea5767 tda8290 tuner_xc2
028 tda9887 tuner_simple mt20xx tea5761 tvaudio msp3400 bttv ir_common
compat_ioctl32 videobuf_dma_sg v
ideobuf_core btcx_risc tveeprom videodev usbhid v4l2_common hid
v4l1_compat sg pata_amd i2c_nforce2
[11166.600470] Pid: 5548, comm: nfsv4-svc Not tainted 2.6.24-rc3-mm2 #3
[11166.604912] RIP: 0010:[<ffffffff803bae54>]  [<ffffffff803bae54>]
__list_add+0x54/0x60
[11166.610408] RSP: 0000:ffff81007d83fdc0  EFLAGS: 00010282
[11166.614144] RAX: 0000000000000088 RBX: ffff81007f2e0400 RCX: 0000000000000002
[11166.619113] RDX: ffff81007dc6eed0 RSI: 0000000000000001 RDI: ffffffff807590c0
[11166.624130] RBP: ffff81007d83fdc0 R08: 0000000000000001 R09: 0000000000000000
[11166.629124] R10: ffff810080058d48 R11: 0000000000000001 R12: ffff81007e444680
[11166.634129] R13: ffff81007e4446b8 R14: ffff81007e4446b8 R15: ffff81011ff50100
[11166.639128] FS:  00007fb815abc6f0(0000) GS:ffff81011ff13280(0000)
knlGS:0000000000000000
[11166.644786] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[11166.648809] CR2: 0000000000441770 CR3: 0000000000201000 CR4: 00000000000006e0
[11166.653796] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[11166.658784] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[11166.663783] Process nfsv4-svc (pid: 5548, threadinfo
FFFF81007D83E000, task FFFF81007DC6EED0)
[11166.669776] Stack:  ffff81007d83fe00 ffffffff805be25e
ffff81007e444688 ffff81011ff50100
[11166.675428]  ffff81007f2e0400 ffff81007dd62000 ffff81010a138000
ffff81011ff50110
[11166.680660]  ffff81007d83fe10 ffffffff805be357 ffff81007d83fee0
ffffffff805bf09c
[11166.685744] Call Trace:
[11166.687592]  [<ffffffff805be25e>] svc_xprt_enqueue+0x1ae/0x250
[11166.691672]  [<ffffffff805be357>] svc_xprt_received+0x17/0x20
[11166.695700]  [<ffffffff805bf09c>] svc_recv+0x39c/0x840
[11166.699299]  [<ffffffff805bea2f>] svc_send+0xaf/0xd0
[11166.702755]  [<ffffffff8022f590>] default_wake_function+0x0/0x10
[11166.706983]  [<ffffffff803163ea>] nfs_callback_svc+0x7a/0x130
[11166.710992]  [<ffffffff805cfe92>] trace_hardirqs_on_thunk+0x35/0x3a
[11166.715377]  [<ffffffff80259f8f>] trace_hardirqs_on+0xbf/0x160
[11166.719454]  [<ffffffff8020cbc8>] child_rip+0xa/0x12
[11166.722919]  [<ffffffff8020c2df>] restore_args+0x0/0x30
[11166.726578]  [<ffffffff80316370>] nfs_callback_svc+0x0/0x130
[11166.730540]  [<ffffffff8020cbbe>] child_rip+0x0/0x12
[11166.734024]
[11166.735072] INFO: lockdep is turned off.
[11166.737843]
[11166.737844] Code: 0f 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 8b 16 48 89 e5 e8
[11166.744160] RIP  [<ffffffff803bae54>] __list_add+0x54/0x60
[11166.748015]  RSP <ffff81007d83fdc0>
[11166.750464] Kernel panic - not syncing: Aiee, killing interrupt handler!
-> then the system hung, no "---[ end trace xyz ]---"-output

Will it make a difference if I try it in -rc6-mm1?

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* [PATCH -mm] crypto: scatterwalk.h needs sched.h
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (12 preceding siblings ...)
  2007-12-27 17:54 ` 2.6.24-rc6-mm1 - crash in tick_sched_timer/update_process_times Valdis.Kletnieks
@ 2007-12-31 18:05 ` Randy Dunlap
  2007-12-31 22:31   ` Herbert Xu
  2007-12-31 18:05 ` [PATCH -mm] driver core: build with SYSFS=n Randy Dunlap
                   ` (6 subsequent siblings)
  20 siblings, 1 reply; 146+ messages in thread
From: Randy Dunlap @ 2007-12-31 18:05 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, herbert, davem

From: Randy Dunlap <randy.dunlap@oracle.com>

When CONFIG_PREEMPT_NONE=y, scatterwalk.h still uses cond_resched()
so it needs to include sched.h:

linux-2.6.24-rc6-mm1/include/crypto/scatterwalk.h:52: error: implicit declaration of function 'cond_resched'
make[2]: *** [crypto/digest.o] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
---
 include/crypto/scatterwalk.h |    1 +
 1 file changed, 1 insertion(+)

--- linux-2.6.24-rc6-mm1.orig/include/crypto/scatterwalk.h
+++ linux-2.6.24-rc6-mm1/include/crypto/scatterwalk.h
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/scatterlist.h>
+#include <linux/sched.h>
 
 static inline enum km_type crypto_kmap_type(int out)
 {

^ permalink raw reply	[flat|nested] 146+ messages in thread

* [PATCH -mm] driver core: build with SYSFS=n
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (13 preceding siblings ...)
  2007-12-31 18:05 ` [PATCH -mm] crypto: scatterwalk.h needs sched.h Randy Dunlap
@ 2007-12-31 18:05 ` Randy Dunlap
  2007-12-31 18:18 ` 2.6.24-rc6-mm1 (build problem: v4l / i2c) Randy Dunlap
                   ` (5 subsequent siblings)
  20 siblings, 0 replies; 146+ messages in thread
From: Randy Dunlap @ 2007-12-31 18:05 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, gregkh

From: Randy Dunlap <randy.dunlap@oracle.com>

When SYSFS=n and MODULES=y, build ends with:

linux-2.6.24-rc6-mm1/drivers/base/module.c: In function 'module_add_driver':
linux-2.6.24-rc6-mm1/drivers/base/module.c:49: error: 'module_kset' undeclared (first use in this function)
make[3]: *** [drivers/base/module.o] Error 1

Below is one possible fix.
Build-tested with all 4 config combinations of SYSFS & MODULES.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
---
 drivers/base/Makefile |    2 ++
 drivers/base/base.h   |    2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

--- linux-2.6.24-rc6-mm1.orig/drivers/base/Makefile
+++ linux-2.6.24-rc6-mm1/drivers/base/Makefile
@@ -11,7 +11,9 @@ obj-$(CONFIG_FW_LOADER)	+= firmware_clas
 obj-$(CONFIG_NUMA)	+= node.o
 obj-$(CONFIG_MEMORY_HOTPLUG_SPARSE) += memory.o
 obj-$(CONFIG_SMP)	+= topology.o
+ifeq ($(CONFIG_SYSFS),y)
 obj-$(CONFIG_MODULES)	+= module.o
+endif
 obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o
 
 ifeq ($(CONFIG_DEBUG_DRIVER),y)
--- linux-2.6.24-rc6-mm1.orig/drivers/base/base.h
+++ linux-2.6.24-rc6-mm1/drivers/base/base.h
@@ -79,7 +79,7 @@ extern char *make_class_name(const char 
 
 extern int devres_release_all(struct device *dev);
 
-#ifdef CONFIG_MODULES
+#if defined(CONFIG_MODULES) && defined(CONFIG_SYSFS)
 extern void module_add_driver(struct module *mod, struct device_driver *drv);
 extern void module_remove_driver(struct device_driver *drv);
 #else

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 (build problem: v4l / i2c)
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (14 preceding siblings ...)
  2007-12-31 18:05 ` [PATCH -mm] driver core: build with SYSFS=n Randy Dunlap
@ 2007-12-31 18:18 ` Randy Dunlap
  2007-12-31 19:01   ` [v4l-dvb-maintainer] " Michael Krufky
  2007-12-31 18:18 ` 2.6.24-rc6-mm1 (build problem: gpio_keys) Randy Dunlap
                   ` (4 subsequent siblings)
  20 siblings, 1 reply; 146+ messages in thread
From: Randy Dunlap @ 2007-12-31 18:18 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, v4l-dvb-maintainer

[-- Attachment #1: Type: text/plain, Size: 193 bytes --]

  MODPOST 120 modules
ERROR: "i2c_attach_client" [drivers/media/video/v4l2-common.ko] undefined!
make[2]: *** [__modpost] Error 1

---
~Randy
desserts:  http://www.xenotime.net/linux/recipes/


[-- Attachment #2: config-v4l-i2c --]
[-- Type: application/octet-stream, Size: 24084 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6-mm1
# Mon Dec 31 09:15:04 2007
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_CLASSIC_RCU is not set
CONFIG_PREEMPT_RCU=y

#
# Processor type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_SUPPORTS_KVM=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_I8K=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=m
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
CONFIG_PM_VERBOSE=y
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ISA_DMA_API=y

#
# Executable file formats / Emulations
#
# CONFIG_BINFMT_ELF is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_NET_NS=y
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
CONFIG_ATM=m
CONFIG_ATM_LANE=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
# CONFIG_IPDDP is not set
CONFIG_X25=m
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RR=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
# CONFIG_NET_EMATCH_NBYTE is not set
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=m
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_POLICE=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
# CONFIG_CAN_BCM is not set

#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
# CONFIG_ALI_FIR is not set
CONFIG_VIA_FIR=y
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
# CONFIG_BT_RFCOMM_TTY is not set
# CONFIG_BT_BNEP is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIVHCI=m

#
# Wireless
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=y
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=y
CONFIG_IEEE80211_SOFTMAC=y
CONFIG_IEEE80211_SOFTMAC_DEBUG=y
CONFIG_RFKILL=y
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_HD_IDE=y
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECD is not set
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
CONFIG_BLK_DEV_HD=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
CONFIG_MACVLAN=y
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
CONFIG_VETH=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SHAPER=y
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
# CONFIG_INPUT is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set

#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
# CONFIG_IPMI_SI is not set
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_R3964=y
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
CONFIG_W1=y

#
# 1-wire Bus Masters
#

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_CORE=m
# CONFIG_WATCHDOG_DEBUG_CORE is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_SC520_WDT=y
CONFIG_EUROTECH_WDT=y
CONFIG_IB700_WDT=y
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_IT8712F_WDT=y
CONFIG_HP_WATCHDOG=y
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=y
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not set
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set

#
# Graphics support
#
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_ARC=m
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_HECUBA is not set
CONFIG_FB_HGA=y
# CONFIG_FB_HGA_ACCEL is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_SM501=m
CONFIG_FB_VIRTUAL=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_RTCTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_DETECT is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=m

#
# System on Chip audio support
#
CONFIG_SND_SOC=m

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_MSNDCLAS=m
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_PASSWORDS is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set

#
# MMC/SD Host Controller Drivers
#
# CONFIG_MMC_WBSD is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set

#
# Userspace I/O
#
CONFIG_UIO=y

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4DEV_FS=y
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
# CONFIG_EXT4DEV_FS_SECURITY is not set
CONFIG_JBD=y
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set

#
# Layered filesystems
#
CONFIG_ECRYPT_FS=m
CONFIG_UNION_FS=m
CONFIG_UNION_FS_XATTR=y
CONFIG_UNION_FS_DEBUG=y

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=m
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=m
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_PROFILE_LIKELY=y
CONFIG_FORCED_INLINING=y
CONFIG_DEBUG_SYNCHRO_TEST=m
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_LKDTM=m
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_XTS is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 (build problem: gpio_keys)
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (15 preceding siblings ...)
  2007-12-31 18:18 ` 2.6.24-rc6-mm1 (build problem: v4l / i2c) Randy Dunlap
@ 2007-12-31 18:18 ` Randy Dunlap
  2007-12-31 18:40   ` David Brownell
  2007-12-31 18:19 ` 2.6.24-rc6-mm1 (build problem: gpio/W1) Randy Dunlap
                   ` (3 subsequent siblings)
  20 siblings, 1 reply; 146+ messages in thread
From: Randy Dunlap @ 2007-12-31 18:18 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, david-b

[-- Attachment #1: Type: text/plain, Size: 2425 bytes --]

  CC      drivers/input/keyboard/gpio_keys.o
In file included from /local/linsrc/linux-2.6.24-rc6-mm1/drivers/input/keyboard/gpio_keys.c:27:
include2/asm/gpio.h:4:18: error: gpio.h: No such file or directory
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/input/keyboard/gpio_keys.c: In function 'gpio_keys_isr':
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/input/keyboard/gpio_keys.c:40: error: implicit declaration of function 'gpio_to_irq'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/input/keyboard/gpio_keys.c:42: error: implicit declaration of function 'gpio_get_value'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/input/keyboard/gpio_keys.c: In function 'gpio_keys_probe':
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/input/keyboard/gpio_keys.c:81: error: implicit declaration of function 'gpio_request'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/input/keyboard/gpio_keys.c:88: error: implicit declaration of function 'gpio_direction_input'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/input/keyboard/gpio_keys.c:93: error: implicit declaration of function 'gpio_free'
make[4]: *** [drivers/input/keyboard/gpio_keys.o] Error 1

  CC      drivers/leds/leds-gpio.o
In file included from /local/linsrc/linux-2.6.24-rc6-mm1/drivers/leds/leds-gpio.c:18:
include2/asm/gpio.h:4:18: error: gpio.h: No such file or directory
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/leds/leds-gpio.c: In function 'gpio_led_work':
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/leds/leds-gpio.c:34: error: implicit declaration of function 'gpio_set_value_cansleep'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/leds/leds-gpio.c: In function 'gpio_led_set':
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/leds/leds-gpio.c:60: error: implicit declaration of function 'gpio_set_value'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/leds/leds-gpio.c: In function 'gpio_led_probe':
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/leds/leds-gpio.c:85: error: implicit declaration of function 'gpio_cansleep'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/leds/leds-gpio.c:90: error: implicit declaration of function 'gpio_request'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/leds/leds-gpio.c:94: error: implicit declaration of function 'gpio_direction_output'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/leds/leds-gpio.c:100: error: implicit declaration of function 'gpio_free'
make[3]: *** [drivers/leds/leds-gpio.o] Error 1


---
~Randy
desserts:  http://www.xenotime.net/linux/recipes/


[-- Attachment #2: config-gpio-keys --]
[-- Type: application/octet-stream, Size: 32028 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6-mm1
# Mon Dec 31 09:38:54 2007
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_HT=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_X86_RDC321X=y
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
CONFIG_MPSC=y
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_ARCH_SUPPORTS_KVM=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
CONFIG_RCU_TRACE=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
CONFIG_NUMA=y
# CONFIG_K8_NUMA is not set
CONFIG_THREAD_ORDER=1
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_MTRR is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_ACPI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_NET_KEY=y
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=y
CONFIG_DECNET=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
# CONFIG_IPDDP_DECAP is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RR=y
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=y
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_POLICE is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRNET=y
# CONFIG_IRCOMM is not set
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#

#
# Old SIR device drivers
#

#
# Old Serial dongle support
#

#
# FIR device drivers
#
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
CONFIG_VIA_FIR=y
CONFIG_BT=y
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIDTL1=y
# CONFIG_BT_HCIBT3C is not set
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
# CONFIG_BT_HCIVHCI is not set

#
# Wireless
#
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
# CONFIG_IEEE80211 is not set
CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_LEDS=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
CONFIG_BLK_DEV_DAC960=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
CONFIG_PHANTOM=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_FJKEYINF is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_SRP=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_FDOMAIN=y
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# An alternative FireWire stack is available with EXPERIMENTAL=y
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
CONFIG_IEEE1394_VERBOSEDEBUG=y

#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
# CONFIG_IEEE1394_OHCI1394 is not set

#
# Protocols
#
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
CONFIG_IEEE1394_RAWIO=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=y
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
# CONFIG_I2O_BUS is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_R8169=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
CONFIG_3C359=y
# CONFIG_TMS380TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
CONFIG_PCMCIA_NMCLAN=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_PCMCIA_AXNET=y
CONFIG_WAN=y
CONFIG_LANMEDIA=y
# CONFIG_HDLC is not set
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
# CONFIG_FDDI is not set
CONFIG_PPP=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
CONFIG_PHONE=y
CONFIG_PHONE_IXJ=y
# CONFIG_PHONE_IXJ_PCMCIA is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_INPUT_TABLET=y
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_UINPUT=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
CONFIG_R3964=y
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_IPWIRELESS=y
CONFIG_MWAVE=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_I810=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_PROSAVAGE=y
CONFIG_I2C_SAVAGE4=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIAPRO=y
# CONFIG_I2C_VOODOO3 is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_PCF8575 is not set
# CONFIG_TPS65010 is not set
CONFIG_OZ99X=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y

#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#

#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=y
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
CONFIG_EUROTECH_WDT=y
CONFIG_IB700_WDT=y
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
# CONFIG_ITCO_WDT is not set
CONFIG_IT8712F_WDT=y
# CONFIG_HP_WATCHDOG is not set
CONFIG_SC1200_WDT=y
# CONFIG_PC87413_WDT is not set
CONFIG_60XX_WDT=y
CONFIG_SBC8360_WDT=y
CONFIG_CPU5_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_W83627HF_WDT=y
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
CONFIG_SBC_EPX_C3_WATCHDOG=y

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=y
# CONFIG_WDT_501_PCI is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set

#
# Encoders/decoders and other helper chips
#

#
# Audio decoders
#
CONFIG_VIDEO_TVAUDIO=y
# CONFIG_VIDEO_TDA7432 is not set
CONFIG_VIDEO_TDA9840=y
# CONFIG_VIDEO_TDA9875 is not set
CONFIG_VIDEO_TEA6415C=y
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS53L32A=y
# CONFIG_VIDEO_WM8775 is not set
CONFIG_VIDEO_WM8739=y

#
# Video decoders
#
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_OV7670=y
# CONFIG_VIDEO_TCM825X is not set
CONFIG_VIDEO_SAA7110=y
CONFIG_VIDEO_SAA7111=y
CONFIG_VIDEO_SAA7114=y
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP5150 is not set
CONFIG_VIDEO_VPX3220=y

#
# Video and audio decoders
#

#
# MPEG video encoders
#

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_ADV7170=y
# CONFIG_VIDEO_ADV7175 is not set

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=y
CONFIG_VIDEO_SAA6588=y
CONFIG_VIDEO_CPIA=y
# CONFIG_VIDEO_SAA5246A is not set
CONFIG_VIDEO_SAA5249=y
CONFIG_TUNER_3036=y
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_SAA7134=y
# CONFIG_VIDEO_MXB is not set
CONFIG_VIDEO_DPC=y
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_CX88=y
# CONFIG_VIDEO_CX88_BLACKBIRD is not set
CONFIG_VIDEO_CAFE_CCIC=y
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_GEMTEK_PCI=y
# CONFIG_RADIO_MAXIRADIO is not set
CONFIG_RADIO_MAESTRO=y
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEO_TUNER_CUSTOMIZE=y
CONFIG_TUNER_XC2028=y
# CONFIG_TUNER_MT20XX is not set
# CONFIG_TUNER_TDA8290 is not set
CONFIG_TUNER_TEA5767=y
CONFIG_TUNER_SIMPLE=y
CONFIG_TUNER_TDA9887=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEO_BTCX=y
CONFIG_VIDEO_IR_I2C=y
CONFIG_VIDEO_IR=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_DAB=y

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=y
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CORGI=y
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_GPIO=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y

#
# Conflicting RTC option has been selected, check GEN_RTC and RTC
#
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DEBUG=y

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=y

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_RS5C348=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
# CONFIG_NET_DMA is not set
CONFIG_DCA=y

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y

#
# Layered filesystems
#

#
# Miscellaneous filesystems
#
CONFIG_HFSPLUS_FS=y
# CONFIG_CRAMFS is not set
CONFIG_VXFS_FS=y
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DEBUG_SYNCHRO_TEST=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 (build problem: gpio/W1)
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (16 preceding siblings ...)
  2007-12-31 18:18 ` 2.6.24-rc6-mm1 (build problem: gpio_keys) Randy Dunlap
@ 2007-12-31 18:19 ` Randy Dunlap
  2008-01-05 15:29   ` Evgeniy Polyakov
  2007-12-31 20:11 ` 2.6.24-rc6-mm1 (driver core/sysfs) Randy Dunlap
                   ` (2 subsequent siblings)
  20 siblings, 1 reply; 146+ messages in thread
From: Randy Dunlap @ 2007-12-31 18:19 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, johnpol, david-b

[-- Attachment #1: Type: text/plain, Size: 1462 bytes --]

  CC      drivers/w1/masters/w1-gpio.o
In file included from /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:19:
include2/asm/gpio.h:4:18: error: gpio.h: No such file or directory
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c: In function 'w1_gpio_write_bit_dir':
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:26: error: implicit declaration of function 'gpio_direction_input'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:28: error: implicit declaration of function 'gpio_direction_output'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c: In function 'w1_gpio_write_bit_val':
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:35: error: implicit declaration of function 'gpio_set_value'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c: In function 'w1_gpio_read_bit':
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:42: error: implicit declaration of function 'gpio_get_value'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c: In function 'w1_gpio_probe':
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:58: error: implicit declaration of function 'gpio_request'
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:82: error: implicit declaration of function 'gpio_free'
make[4]: *** [drivers/w1/masters/w1-gpio.o] Error 1

---
~Randy
desserts:  http://www.xenotime.net/linux/recipes/


[-- Attachment #2: config-w1-gpio --]
[-- Type: application/octet-stream, Size: 24165 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6-mm1
# Mon Dec 31 09:07:27 2007
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_CLASSIC_RCU is not set
CONFIG_PREEMPT_RCU=y

#
# Processor type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_X86_RDC321X=y
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_SUPPORTS_KVM=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=m
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
CONFIG_PM_VERBOSE=y
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ISA_DMA_API=y

#
# Executable file formats / Emulations
#
# CONFIG_BINFMT_ELF is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_NET_NS=y
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
CONFIG_ATM=m
CONFIG_ATM_LANE=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
# CONFIG_IPDDP is not set
CONFIG_X25=m
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RR=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
# CONFIG_NET_EMATCH_NBYTE is not set
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=m
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_POLICE=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
# CONFIG_CAN_BCM is not set

#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
# CONFIG_ALI_FIR is not set
CONFIG_VIA_FIR=y
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
# CONFIG_BT_RFCOMM_TTY is not set
# CONFIG_BT_BNEP is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIVHCI=m

#
# Wireless
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=y
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=y
CONFIG_IEEE80211_SOFTMAC=y
CONFIG_IEEE80211_SOFTMAC_DEBUG=y
CONFIG_RFKILL=y
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_HD_IDE=y
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECD is not set
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
CONFIG_BLK_DEV_HD=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
CONFIG_MACVLAN=y
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
CONFIG_VETH=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SHAPER=y
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
# CONFIG_INPUT is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set

#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
# CONFIG_IPMI_SI is not set
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_R3964=y
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_GPIO=y

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_CORE=m
# CONFIG_WATCHDOG_DEBUG_CORE is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_SC520_WDT=y
CONFIG_EUROTECH_WDT=y
CONFIG_IB700_WDT=y
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_IT8712F_WDT=y
CONFIG_HP_WATCHDOG=y
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=y
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not set
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set

#
# Encoders/decoders and other helper chips
#

#
# Audio decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#

#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m

#
# Video encoders
#

#
# Video improvement chips
#
# CONFIG_VIDEO_VIVI is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DAB=y

#
# Graphics support
#
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_ARC=m
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_HECUBA is not set
CONFIG_FB_HGA=y
# CONFIG_FB_HGA_ACCEL is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_SM501=m
CONFIG_FB_VIRTUAL=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_RTCTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_DETECT is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=m

#
# System on Chip audio support
#
CONFIG_SND_SOC=m

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_MSNDCLAS=m
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
CONFIG_LEDS_GPIO=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set

#
# Userspace I/O
#
CONFIG_UIO=y

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4DEV_FS=y
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
# CONFIG_EXT4DEV_FS_SECURITY is not set
CONFIG_JBD=y
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set

#
# Layered filesystems
#
CONFIG_ECRYPT_FS=m
CONFIG_UNION_FS=m
CONFIG_UNION_FS_XATTR=y
CONFIG_UNION_FS_DEBUG=y

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=m
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=m
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_PROFILE_LIKELY=y
CONFIG_FORCED_INLINING=y
CONFIG_DEBUG_SYNCHRO_TEST=m
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_LKDTM=m
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_XTS is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 (build problem: gpio_keys)
  2007-12-31 18:18 ` 2.6.24-rc6-mm1 (build problem: gpio_keys) Randy Dunlap
@ 2007-12-31 18:40   ` David Brownell
  2007-12-31 19:10     ` [PATCH -mm] gpio: fix x86 build problem: gpio_keys Randy Dunlap
  0 siblings, 1 reply; 146+ messages in thread
From: David Brownell @ 2007-12-31 18:40 UTC (permalink / raw)
  To: Randy Dunlap; +Cc: Andrew Morton, linux-kernel

On Monday 31 December 2007, Randy Dunlap wrote:
>   CC      drivers/input/keyboard/gpio_keys.o
> In file included from /local/linsrc/linux-2.6.24-rc6-mm1/drivers/input/keyboard/gpio_keys.c:27:
> include2/asm/gpio.h:4:18: error: gpio.h: No such file or directory

Find whatever broken patch selected (on x86_64)

   CONFIG_GENERIC_GPIO=y

without actually providing that support (by providing <asm/gpio.h> and
an implementation backing it up).  That's the patch which broke those
various GPIO-dependant drivers.

- Dave



^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [v4l-dvb-maintainer] 2.6.24-rc6-mm1 (build problem: v4l / i2c)
  2007-12-31 18:18 ` 2.6.24-rc6-mm1 (build problem: v4l / i2c) Randy Dunlap
@ 2007-12-31 19:01   ` Michael Krufky
  2007-12-31 19:08     ` Michael Krufky
  0 siblings, 1 reply; 146+ messages in thread
From: Michael Krufky @ 2007-12-31 19:01 UTC (permalink / raw)
  To: Randy Dunlap
  Cc: Andrew Morton, v4l-dvb-maintainer, linux-kernel, Mauro Carvalho Chehab

Randy Dunlap wrote:
>   MODPOST 120 modules
> ERROR: "i2c_attach_client" [drivers/media/video/v4l2-common.ko] undefined!
> make[2]: *** [__modpost] Error 1
>
> ---
> ~Randy
> desserts:  http://www.xenotime.net/linux/recipes/

I fixed this problem in this changeset:

http://linuxtv.org/hg/v4l-dvb/rev/64e0c78821c4

Mauro, can you send this upstream?

for mm:  here is the raw patch:

http://linuxtv.org/hg/v4l-dvb/raw-rev/64e0c78821c4

Regards,

Mike

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [v4l-dvb-maintainer] 2.6.24-rc6-mm1 (build problem: v4l / i2c)
  2007-12-31 19:01   ` [v4l-dvb-maintainer] " Michael Krufky
@ 2007-12-31 19:08     ` Michael Krufky
  0 siblings, 0 replies; 146+ messages in thread
From: Michael Krufky @ 2007-12-31 19:08 UTC (permalink / raw)
  To: Randy Dunlap
  Cc: Andrew Morton, Mauro Carvalho Chehab, v4l-dvb-maintainer, linux-kernel

Michael Krufky wrote:
> Randy Dunlap wrote:
>   
>>   MODPOST 120 modules
>> ERROR: "i2c_attach_client" [drivers/media/video/v4l2-common.ko] undefined!
>> make[2]: *** [__modpost] Error 1
>>
>> ---
>> ~Randy
>> desserts:  http://www.xenotime.net/linux/recipes/
>>     
>
> I fixed this problem in this changeset:
>
> http://linuxtv.org/hg/v4l-dvb/rev/64e0c78821c4
Hmm, I apologize -- I think this was an unrelated issue.  Sorry for the
confusion.

-Mike

^ permalink raw reply	[flat|nested] 146+ messages in thread

* [PATCH -mm] gpio: fix x86 build problem: gpio_keys
  2007-12-31 18:40   ` David Brownell
@ 2007-12-31 19:10     ` Randy Dunlap
  2008-01-01 15:32       ` Ingo Molnar
  0 siblings, 1 reply; 146+ messages in thread
From: Randy Dunlap @ 2007-12-31 19:10 UTC (permalink / raw)
  To: David Brownell, florian; +Cc: Andrew Morton, linux-kernel

On Mon, 31 Dec 2007 10:40:27 -0800 David Brownell wrote:

> On Monday 31 December 2007, Randy Dunlap wrote:
> >   CC      drivers/input/keyboard/gpio_keys.o
> > In file included from /local/linsrc/linux-2.6.24-rc6-mm1/drivers/input/keyboard/gpio_keys.c:27:
> > include2/asm/gpio.h:4:18: error: gpio.h: No such file or directory
> 
> Find whatever broken patch selected (on x86_64)
> 
>    CONFIG_GENERIC_GPIO=y
> 
> without actually providing that support (by providing <asm/gpio.h> and
> an implementation backing it up).  That's the patch which broke those
> various GPIO-dependant drivers.

OK, thanks for the direction.

---

From: Randy Dunlap <randy.dunlap@oracle.com>

X86_RDC321X is X86_32, so make it depend on X86_32 so that
X86_64 random configs don't try to build RDC and fail.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
---
 arch/x86/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- linux-2.6.24-rc6-mm1.orig/arch/x86/Kconfig
+++ linux-2.6.24-rc6-mm1/arch/x86/Kconfig
@@ -297,6 +297,7 @@ config X86_ES7000
 
 config X86_RDC321X
 	bool "RDC R-321x SoC"
+	depends on X86_32
 	select M486
 	select X86_REBOOTFIXUPS
 	select GENERIC_GPIO

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 (driver core/sysfs)
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (17 preceding siblings ...)
  2007-12-31 18:19 ` 2.6.24-rc6-mm1 (build problem: gpio/W1) Randy Dunlap
@ 2007-12-31 20:11 ` Randy Dunlap
  2008-01-12  1:05   ` Greg KH
  2008-01-06 10:03 ` 2.6.24-rc6-mm1: sparc64: undefined reference to `vmemmap_table' Mariusz Kozlowski
  2008-01-07 13:50 ` [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1) Dhaval Giani
  20 siblings, 1 reply; 146+ messages in thread
From: Randy Dunlap @ 2007-12-31 20:11 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, gregkh

On Sat, 22 Dec 2007 23:30:56 -0800 Andrew Morton wrote:

> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/


With CONFIG_BLOCK=n:

  LD      drivers/block/built-in.o
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/base/core.c: In function 'device_add_class_symlinks':
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/base/core.c:707: error: 'part_type' undeclared (first use in this function)
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/base/core.c: In function 'device_remove_class_symlinks':
/local/linsrc/linux-2.6.24-rc6-mm1/drivers/base/core.c:746: error: 'part_type' undeclared (first use in this function)
make[3]: *** [drivers/base/core.o] Error 1


and that is after fixing (in some sense) the first CONFIG_BLOCK=n
problem with the patch below.  Please test lots of configs.
and/or use 'make randconfig' (automated, scripted, e.g., etc.).
maybe check Documentation/SubmitChecklist.  :)

---

From: Randy Dunlap <randy.dunlap@oracle.com>

Parts of driver core use blk_lookup_devt() when CONFIG_BLOCK=n,
so provide an short inline version of it for that case.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
---
 include/linux/genhd.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- linux-2.6.24-rc6-mm1.orig/include/linux/genhd.h
+++ linux-2.6.24-rc6-mm1/include/linux/genhd.h
@@ -10,6 +10,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/kdev_t.h>
 
 #ifdef CONFIG_BLOCK
 
@@ -443,6 +444,12 @@ static inline struct block_device *bdget
 
 static inline void printk_all_partitions(void) { }
 
+static inline dev_t blk_lookup_devt(const char *name)
+{
+	dev_t devt = MKDEV(0, 0);
+	return devt;
+}
+
 #endif /* CONFIG_BLOCK */
 
 #endif

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-30  3:34           ` 2.6.24-rc6-mm1 Torsten Kaiser
  2007-12-30  5:41             ` 2.6.24-rc6-mm1 Randy Dunlap
@ 2007-12-31 20:15             ` Torsten Kaiser
  2008-01-01 12:04               ` 2.6.24-rc6-mm1 Herbert Xu
  1 sibling, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2007-12-31 20:15 UTC (permalink / raw)
  To: Herbert Xu
  Cc: Andrew Morton, linux-kernel, Neil Brown, J. Bruce Fields, netdev,
	Tom Tucker

On Dec 30, 2007 4:34 AM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> On Dec 30, 2007 2:30 AM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
> > On Sat, Dec 29, 2007 at 05:51:13PM +0100, Torsten Kaiser wrote:
> > >
> > > > > The cause, why I am resending this: I just got a crash with
> > > > > 2.6.24-rc6-mm1, again looking network related:
> > > > >
> > > > > [93436.933356] WARNING: at include/net/dst.h:165 dst_release()
> > > > > [93436.936685] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
> > > > > [93436.939292]
> > > > > [93436.939293] Call Trace:
> > > > > [93436.939304]  [<ffffffff80531d2d>] skb_release_all+0xdd/0x110
> > > > > [93436.939307]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
> > > > > [93436.939309]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
> > > > > [93436.939312]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
> > > > > [93436.939315]  [<ffffffff805a0c91>] unix_release+0x21/0x30
> > > > > [93436.939318]  [<ffffffff8052b144>] sock_release+0x24/0x90
> > > > > [93436.939320]  [<ffffffff8052b656>] sock_close+0x26/0x50
> > > > > [93436.939324]  [<ffffffff8029f921>] __fput+0xc1/0x230
> > > > > [93436.939327]  [<ffffffff8029fe46>] fput+0x16/0x20
> > > > > [93436.939329]  [<ffffffff8029c576>] filp_close+0x56/0x90
> > > > > [93436.939331]  [<ffffffff8029de46>] sys_close+0xa6/0x110
> > > > > [93436.939335]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
> > >
> > > >From code inspection I would blame the patch "[SKBUFF]: Free old skb
> > > properly in skb_morph" from Herbert Xu. (CC added)
> >
> > I doubt it.  skb_morph is only used on IP fragments so I don't see how
> > you could attribute an error from a Unix domain socket to this patch.
>
> That's why I wrote that I do not know much about the network core...
>
> > In any case, Unix socket packets should not have a dst at all so the
> > very fact that you're in that path means that you have some sort of
> > memory corruption.
>
> ... I did not know about the fact that there should not have been an dst.
>
> Its just that this warning was the first nice clue about the memory
> corruption related to networking that I see since 2.6.24-rc3-mm2.
> The time of the patch (Mon, 26 Nov 2007 15:11:19) even fits into the
> window between -rc3-mm1 and -rc3-mm2.
>
> I doubt that the memory corruption is a hardware problem, because the
> system in question is using ECC ram and I did not see any messages
> about corrected/detected errors.
>
> > Is this the very first OOPS/warning that you see? If not you should
> > ignore all but the very first one as that may have left your system
> > in an inconsistent state which may render all subsequent OOPSes and
> > warnings useless.
>
> I looked into the log in question and the only other warning was a
> circular locking dependency that lockdep detected around 1.5 hour
> before this warning.
>
> As reported in my original mail immeadeatly after the warning the
> system OOPSed and hang:
> [93436.947241] general protection fault: 0000 [1] SMP
> -> first OOPS
> [93436.947243] last sysfs file:
> /sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.1/irq
> [93436.947245] CPU 1
> [93436.947246] Modules linked in: radeon drm nfsd exportfs w83792d
> ipv6 tuner tea5767 tda8290 tuner_xc2
> 028 tda9887 tuner_simple mt20xx tea5761 tvaudio msp3400 bttv ir_common
> compat_ioctl32 videobuf_dma_sg v
> ideobuf_core btcx_risc tveeprom usbhid videodev v4l2_common hid
> v4l1_compat pata_amd sg i2c_nforce2
> [93436.947257] Pid: 8079, comm: konqueror Not tainted 2.6.24-rc6-mm1 #11
> -> not tainted by a previous OOPS
>
> [93436.947259] RIP: 0010:[<ffffffff80531438>]  [<ffffffff80531438>]
> skb_drop_list+0x18/0x30
> [93436.947262] RSP: 0018:ffff810005f4fda8  EFLAGS: 00010286
> [93436.947263] RAX: ab1ed5ca5b74e7de RBX: ab1ed5ca5b74e7de RCX: 000000000000d135
> [93436.947265] RDX: ffff81011d089a80 RSI: 0000000000000001 RDI: ffff81011d089a88
> [93436.947266] RBP: ffff810005f4fdb8 R08: 0000000000000001 R09: 0000000000000006
> [93436.947268] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8100de02c500
> [93436.947269] R13: ffff81011c188a00 R14: 0000000000000001 R15: ffff81011c189198
> [93436.947271] FS:  00007fb5bde0d700(0000) GS:ffff81007ff22000(0000)
> knlGS:0000000000000000
> [93436.947273] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [93436.947274] CR2: 00007fb5bdd76000 CR3: 00000000664d5000 CR4: 00000000000006e0
> [93436.947276] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [93436.947277] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [93436.947279] Process konqueror (pid: 8079, threadinfo
> ffff810005f4e000, task ffff8100a1dec000)
> [93436.947281] Stack:  ffff810005f4fdd8 ffff810116c86140
> ffff810005f4fdd8 ffffffff805314ae
> [93436.947284]  ffff810116c86140 ffff8100de02c500 ffff810005f4fdf8
> ffffffff80531cf0
> [93436.947286]  ffff8100de02c500 ffff81011c188b48 ffff810005f4fe18
> ffffffff80531311
> [93436.947288] Call Trace:
> [93436.947290]  [<ffffffff805314ae>] skb_release_data+0x5e/0xa0
> [93436.947293]  [<ffffffff80531cf0>] skb_release_all+0xa0/0x110
> [93436.947295]  [<ffffffff80531311>] __kfree_skb+0x11/0xa0
> [93436.947297]  [<ffffffff805313b7>] kfree_skb+0x17/0x30
> [93436.947299]  [<ffffffff805a0b48>] unix_release_sock+0x128/0x250
> [93436.947302]  [<ffffffff805a0c91>] unix_release+0x21/0x30
> [93436.947304]  [<ffffffff8052b144>] sock_release+0x24/0x90
> [93436.947307]  [<ffffffff8052b656>] sock_close+0x26/0x50
> [93436.947309]  [<ffffffff8029f921>] __fput+0xc1/0x230
> [93436.947312]  [<ffffffff8029fe46>] fput+0x16/0x20
> [93436.947314]  [<ffffffff8029c576>] filp_close+0x56/0x90
> [93436.947316]  [<ffffffff8029de46>] sys_close+0xa6/0x110
> [93436.947319]  [<ffffffff8020b57b>] system_call_after_swapgs+0x7b/0x80
> [93436.947322]
> [93436.947322]
> [93436.947323] Code: 48 8b 18 48 89 c7 e8 5d ff ff ff 48 85 db 75 ed 48 83 c4 08
> [93436.947328] RIP  [<ffffffff80531438>] skb_drop_list+0x18/0x30
> [93436.947330]  RSP <ffff810005f4fda8>
> [93436.947332] ---[ end trace befb7cc3528ab3b1 ]---
>
> Your patch just fit so "good" to my problems:
> * it had the correct time frame for 2.6.24-rc3-mm2
> * it looked guilty at changing the refcounting of __refcnt because of
> the added dst_release()
> * it added other release / freeing operations so that a use-after-free
> memory corruption seemed possible
>
> I just have no better idea to what caused this OOPS and the other
> hangs in -rc3-mm2.

After testing the patch from http://lkml.org/lkml/2007/12/30/210 the
system hung again after building ~10 packages from the last kde4
release candidate. (see other mail)

I then tried to "fix" it with this suspect.
I changed "skb_release_all(dst);" back to "skb_release_data(dst);" in
skb_morph() (net/core/skbuff.c).

I'm now at 205 of 210 packages completed without a further hang. I
also do not see an obvious memory leak.

(All of these tests where done on 2.6.24-rc3-mm2, as I'm relative
sure, that doing these compiles will trigger the error on that kernel
version)

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [PATCH -mm] crypto: scatterwalk.h needs sched.h
  2007-12-31 18:05 ` [PATCH -mm] crypto: scatterwalk.h needs sched.h Randy Dunlap
@ 2007-12-31 22:31   ` Herbert Xu
  0 siblings, 0 replies; 146+ messages in thread
From: Herbert Xu @ 2007-12-31 22:31 UTC (permalink / raw)
  To: Randy Dunlap; +Cc: Andrew Morton, linux-kernel, davem

On Mon, Dec 31, 2007 at 10:05:39AM -0800, Randy Dunlap wrote:
> From: Randy Dunlap <randy.dunlap@oracle.com>
> 
> When CONFIG_PREEMPT_NONE=y, scatterwalk.h still uses cond_resched()
> so it needs to include sched.h:

Thanks.  This is already in cryptodev-2.6.
-- 
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-31 20:15             ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-01 12:04               ` Herbert Xu
  2008-01-01 12:59                 ` 2.6.24-rc6-mm1 Torsten Kaiser
  2008-01-02 18:29                 ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 2 replies; 146+ messages in thread
From: Herbert Xu @ 2008-01-01 12:04 UTC (permalink / raw)
  To: Torsten Kaiser
  Cc: Andrew Morton, linux-kernel, Neil Brown, J. Bruce Fields, netdev,
	Tom Tucker

On Mon, Dec 31, 2007 at 09:15:19PM +0100, Torsten Kaiser wrote:
> 
> I then tried to "fix" it with this suspect.
> I changed "skb_release_all(dst);" back to "skb_release_data(dst);" in
> skb_morph() (net/core/skbuff.c).

Check /proc/net/snmp to see if you're getting any fragments, if not
then skb_morph shouldn't even be getting called.

> I'm now at 205 of 210 packages completed without a further hang. I
> also do not see an obvious memory leak.

In any case, I suspect the cause of your problem is that somebody
somewhere is doing a double-free on an skb.

Since you're the only person who can reproduce this, we really need
your help to track this down.  Since bisecting the mm tree is not
practical, you could start by checking whether the bug is in mm only
or whether it affects rc6 too.

Thanks,
-- 
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-01 12:04               ` 2.6.24-rc6-mm1 Herbert Xu
@ 2008-01-01 12:59                 ` Torsten Kaiser
  2008-01-01 18:29                   ` 2.6.24-rc6-mm1 Torsten Kaiser
  2008-01-02 18:29                 ` 2.6.24-rc6-mm1 Torsten Kaiser
  1 sibling, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-01 12:59 UTC (permalink / raw)
  To: Herbert Xu
  Cc: Andrew Morton, linux-kernel, Neil Brown, J. Bruce Fields, netdev,
	Tom Tucker

On Jan 1, 2008 1:04 PM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
> On Mon, Dec 31, 2007 at 09:15:19PM +0100, Torsten Kaiser wrote:
> >
> > I then tried to "fix" it with this suspect.
> > I changed "skb_release_all(dst);" back to "skb_release_data(dst);" in
> > skb_morph() (net/core/skbuff.c).
>
> Check /proc/net/snmp to see if you're getting any fragments, if not
> then skb_morph shouldn't even be getting called.

OK, thanks for that hint.
I look at this after my next tests.

> > I'm now at 205 of 210 packages completed without a further hang. I
> > also do not see an obvious memory leak.
>
> In any case, I suspect the cause of your problem is that somebody
> somewhere is doing a double-free on an skb.

Is there any debug option I could turn on to catch this?

Hmm... __alloc_skb() uses kmem_cache_alloc_node() and I did run
-rc3-mm2 a long time with slub_debug=FZP and that did not catch
anything. Shouldn't the poisoning catch that? (Sorry if this question
is stupid, but while I can read C, I'm not a kernel expert)

> Since you're the only person who can reproduce this, we really need
> your help to track this down.  Since bisecting the mm tree is not
> practical, you could start by checking whether the bug is in mm only
> or whether it affects rc6 too.

I will try -rc6-mm1 and vanilla -rc6 and report back.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [PATCH -mm] gpio: fix x86 build problem: gpio_keys
  2007-12-31 19:10     ` [PATCH -mm] gpio: fix x86 build problem: gpio_keys Randy Dunlap
@ 2008-01-01 15:32       ` Ingo Molnar
  0 siblings, 0 replies; 146+ messages in thread
From: Ingo Molnar @ 2008-01-01 15:32 UTC (permalink / raw)
  To: Randy Dunlap; +Cc: David Brownell, florian, Andrew Morton, linux-kernel


* Randy Dunlap <randy.dunlap@oracle.com> wrote:

> > Find whatever broken patch selected (on x86_64)
> > 
> >    CONFIG_GENERIC_GPIO=y
> > 
> > without actually providing that support (by providing <asm/gpio.h> and
> > an implementation backing it up).  That's the patch which broke those
> > various GPIO-dependant drivers.
> 
> OK, thanks for the direction.
> 
> ---
> 
> From: Randy Dunlap <randy.dunlap@oracle.com>
> 
> X86_RDC321X is X86_32, so make it depend on X86_32 so that
> X86_64 random configs don't try to build RDC and fail.

thanks Randy, i have applied your fix to x86.git.

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-01 12:59                 ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-01 18:29                   ` Torsten Kaiser
  0 siblings, 0 replies; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-01 18:29 UTC (permalink / raw)
  To: Herbert Xu
  Cc: Andrew Morton, linux-kernel, Neil Brown, J. Bruce Fields, netdev,
	Tom Tucker

On Jan 1, 2008 1:59 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> On Jan 1, 2008 1:04 PM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
> > On Mon, Dec 31, 2007 at 09:15:19PM +0100, Torsten Kaiser wrote:
> > >
> > > I then tried to "fix" it with this suspect.
> > > I changed "skb_release_all(dst);" back to "skb_release_data(dst);" in
> > > skb_morph() (net/core/skbuff.c).

I can't explain, why this seems to fix 2.6.24-rc3-mm2 for me, but at
least in 2.6.24-rc6-mm1 it does not seem to be involved.

> > Check /proc/net/snmp to see if you're getting any fragments, if not
> > then skb_morph shouldn't even be getting called.
>
> OK, thanks for that hint.
> I look at this after my next tests.

During normal work I did not see the frag counters increase.
I used ping -s 10000 to create some frags, worked perfectly.
I used netio -b 63k -u [target] to create around half a million frags,
worked too.

And what really is strange is that I changed skb_morph into this:
struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src)
{
        printk(KERN_ERR "morph %p:%p",dst,src);
        WARN_ON(1);
        skb_release_all(dst);
        return __skb_clone(dst, src);
}
... that warning was not triggered once.

> > > I'm now at 205 of 210 packages completed without a further hang. I
> > > also do not see an obvious memory leak.
> >
> > In any case, I suspect the cause of your problem is that somebody
> > somewhere is doing a double-free on an skb.
> >
> > Since you're the only person who can reproduce this, we really need
> > your help to track this down.  Since bisecting the mm tree is not
> > practical, you could start by checking whether the bug is in mm only
> > or whether it affects rc6 too.

The problem bisecting this, is that I can't seem to trigger this on
demand. Today I was just about giving up on triggering it in -rc6-mm1
with doing package complies when did happen again. But that was after
more then 4 hours...

> I will try -rc6-mm1 and vanilla -rc6 and report back.

As noted above, my WARN_ON(1) in skb_morph did not trigger once before
the system died with this OOPS:
[18663.909931] Unable to handle kernel NULL pointer dereference at
0000000000000000 RIP:
[18663.915489]  [<ffffffff8055f2e8>] tcp_read_sock+0x58/0x1b0
[18663.918652] PGD 73442067 PUD 7480e067 PMD 0
[18663.918652] Oops: 0000 [1] SMP
[18663.918652] last sysfs file:
/sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
[18663.918652] CPU 1
[18663.918652] Modules linked in: radeon drm nfsd exportfs w83792d
ipv6 tuner tea5767 tda8290 tuner_xc2028 tda9887 tuner_simple mt20xx
tea5761 tvaudio msp3400 bttv ir_common compat_ioctl32 videobuf_dma_sg
videobuf_core btcx_risc tveeprom usbhid videodev v4l2_common
v4l1_compat hid sg pata_amd i2c_nforce2
[18663.918652] Pid: 0, comm: swapper Not tainted 2.6.24-rc6-mm1 #13
[18663.918652] RIP: 0010:[<ffffffff8055f2e8>]  [<ffffffff8055f2e8>]
tcp_read_sock+0x58/0x1b0
[18663.918652] RSP: 0018:ffff81007ff4fb60  EFLAGS: 00010286
[18663.918652] RAX: 0000000000000038 RBX: 0000000000000000 RCX: 0000000000000000
[18663.918652] RDX: ffff8100141a40b0 RSI: ffff81007ff4fbc0 RDI: 0000000000000000
[18663.918652] RBP: ffff81007ff4fbb0 R08: 0000000000000002 R09: 0000000000000000
[18663.918652] R10: ffffffff805b2afb R11: 000000000520cde8 R12: 00000000c05a019a
[18663.918652] R13: 000000000f26378b R14: ffff810066469d38 R15: ffff81004b4e4000
[18663.918652] FS:  00007f58ac9a0700(0000) GS:ffff81007ff12580(0000)
knlGS:0000000000000000
[18663.918652] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[18663.918652] CR2: 0000000000000000 CR3: 0000000073441000 CR4: 00000000000006e0
[18663.918652] DR0: 00007fffe1e55cbc DR1: 0000000000000000 DR2: 0000000000000000
[18663.918652] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
[18663.918652] Process swapper (pid: 0, threadinfo ffff81011ff2c000,
task ffff81007ff4a000)
[18663.918652] Stack:  ffff810066469d38 ffff81004b4e4148
ffffffff805b1ab0 ffff81007ff4fbc0
[18663.918652] Stack:  ffff810066469d38 ffff81004b4e4148
ffffffff805b1ab0 ffff81007ff4fbc0
[18663.918652]  00000000805b2afb ffff81004b4e4000 ffff81004b4e4298
ffff810066469d00
[18663.918652]  ffff810066469d38 0000000000000000 ffff81007ff4fbf0
ffffffff805b2b41
[18663.918652] Call Trace:
[18663.918652]  <IRQ>  [<ffffffff805b1ab0>] xs_tcp_data_recv+0x0/0x560
[18663.918652]  [<ffffffff805b2b41>] xs_tcp_data_ready+0x71/0x90
[18663.918652]  [<ffffffff80568bec>] __tcp_ack_snd_check+0x5c/0xa0
[18663.918652]  [<ffffffff8056a458>] tcp_rcv_established+0x3c8/0x800
[18663.918652]  [<ffffffff80571451>] tcp_v4_do_rcv+0x2e1/0x4e0
[18663.918652]  [<ffffffff80573cb1>] tcp_v4_rcv+0x721/0x850
[18663.918652]  [<ffffffff80553d63>] ip_local_deliver_finish+0xd3/0x250
[18663.918652]  [<ffffffff8055433b>] ip_local_deliver+0x3b/0x90
[18663.918652]  [<ffffffff80553988>] ip_rcv_finish+0x118/0x420
[18663.918652]  [<ffffffff8022e313>] enqueue_task_fair+0x73/0xd0
[18663.918652]  [<ffffffff80554236>] ip_rcv+0x226/0x2f0
[18663.918652]  [<ffffffff80537576>] netif_receive_skb+0x1d6/0x280
[18663.918652]  [<ffffffff8053a1ea>] process_backlog+0x8a/0xf0
[18663.918652]  [<ffffffff80539e84>] net_rx_action+0xb4/0x130
[18663.918652]  [<ffffffff8023d624>] __do_softirq+0x84/0x110
[18663.918652]  [<ffffffff8020c82c>] call_softirq+0x1c/0x30
[18663.918652]  [<ffffffff8020eaa5>] do_softirq+0x65/0xc0
[18663.918652]  [<ffffffff8023d595>] irq_exit+0x95/0xa0
[18663.918652]  [<ffffffff8020ebbf>] do_IRQ+0x8f/0x100
[18663.918652]  [<ffffffff8020a4b0>] default_idle+0x0/0x80
[18663.918652]  [<ffffffff8020bb26>] ret_from_intr+0x0/0xf
[18663.918652]  <EOI>  [<ffffffff80252310>]
__atomic_notifier_call_chain+0x0/0xa0
[18663.918652]  [<ffffffff8020a4f3>] default_idle+0x43/0x80
[18663.918652]  [<ffffffff8020a4f1>] default_idle+0x41/0x80
[18663.918652]  [<ffffffff8020a4b0>] default_idle+0x0/0x80
[18663.918652]  [<ffffffff8020a59c>] cpu_idle+0x6c/0xa0
[18663.918652]  [<ffffffff808109b8>] start_secondary+0x2f8/0x420
[18663.918652]
[18663.918652]
[18663.918652] Code: 48 8b 3b 0f 18 0f 74 75 8b 93 a0 00 00 00 45 89 ec 44 2b 63
[18663.918652] RIP  [<ffffffff8055f2e8>] tcp_read_sock+0x58/0x1b0
[18663.918652]  RSP <ffff81007ff4fb60>
[18663.918652] CR2: 0000000000000000
[18663.918680] ---[ end trace 1dc6b1bf3734ac14 ]---

(gdb) list *0xffffffff8055f2e8
0xffffffff8055f2e8 is in tcp_read_sock (net/ipv4/tcp.c:1173).
1168    static inline struct sk_buff *tcp_recv_skb(struct sock *sk,
u32 seq, u32 *off)
1169    {
1170            struct sk_buff *skb;
1171            u32 offset;
1172
1173            skb_queue_walk(&sk->sk_receive_queue, skb) {
1174                    offset = seq - TCP_SKB_CB(skb)->seq;
1175                    if (tcp_hdr(skb)->syn)
1176                            offset--;
1177                    if (offset < skb->len || tcp_hdr(skb)->fin) {

(gdb) list *0xffffffff805b2b41
0xffffffff805b2b41 is in xs_tcp_data_ready (net/sunrpc/xprtsock.c:1079).
1074                    goto out;
1075
1076            /* We use rd_desc to pass struct xprt to xs_tcp_data_recv */
1077            rd_desc.arg.data = xprt;
1078            rd_desc.count = 65536;
1079            tcp_read_sock(sk, &rd_desc, xs_tcp_data_recv);
1080    out:
1081            read_unlock(&sk->sk_callback_lock);
1082    }
1083

I will see what vanilla -rc6 will do...

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-01 12:04               ` 2.6.24-rc6-mm1 Herbert Xu
  2008-01-01 12:59                 ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-02 18:29                 ` Torsten Kaiser
  2008-01-02 21:51                   ` 2.6.24-rc6-mm1 Herbert Xu
  1 sibling, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-02 18:29 UTC (permalink / raw)
  To: Herbert Xu
  Cc: Andrew Morton, linux-kernel, Neil Brown, J. Bruce Fields, netdev,
	Tom Tucker

On Jan 1, 2008 1:04 PM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
> In any case, I suspect the cause of your problem is that somebody
> somewhere is doing a double-free on an skb.
>
> Since you're the only person who can reproduce this, we really need
> your help to track this down.  Since bisecting the mm tree is not
> practical, you could start by checking whether the bug is in mm only
> or whether it affects rc6 too.

Vanilla 2.6.24-rc6 seems stable. I did not see any crash or warnings.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* [patch] x86 compat_binfmt_elf, Makefile fixes (was: Re: 2.6.24-rc6-mm1)
  2007-12-23 22:44           ` 2.6.24-rc6-mm1 Rafael J. Wysocki
@ 2008-01-02 20:05             ` Ingo Molnar
  2008-01-02 20:32               ` Rafael J. Wysocki
  0 siblings, 1 reply; 146+ messages in thread
From: Ingo Molnar @ 2008-01-02 20:05 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Sam Ravnborg, Andrew Morton, linux-kernel, Roland McGrath


* Rafael J. Wysocki <rjw@sisk.pl> wrote:

> > Try to delete your fs/ directory in your output dir. Then I expect 
> > the same bug to surface again.
> 
> It does surface indeed.

could you try the patch from Sam below - does it fix the problem? 
Thanks,

	Ingo

---------->
Subject: x86 compat_binfmt_elf, Makefile fixes
From: Sam Ravnborg <sam@ravnborg.org>

fix the build rules of compat-binfmt_elf.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig       |    1 +
 arch/x86/ia32/Makefile |    5 ++---
 fs/Kconfig.binfmt      |   10 ++++++++++
 fs/Makefile            |    1 +
 4 files changed, 14 insertions(+), 3 deletions(-)

Index: linux-x86.q/arch/x86/Kconfig
===================================================================
--- linux-x86.q.orig/arch/x86/Kconfig
+++ linux-x86.q/arch/x86/Kconfig
@@ -1546,6 +1546,7 @@ source "fs/Kconfig.binfmt"
 config IA32_EMULATION
 	bool "IA32 Emulation"
 	depends on X86_64
+	select HAVE_COMPAT_BINFMT_ELF
 	help
 	  Include code to run 32-bit programs under a 64-bit kernel. You should
 	  likely turn this on, unless you're 100% sure that you don't have any
Index: linux-x86.q/arch/x86/ia32/Makefile
===================================================================
--- linux-x86.q.orig/arch/x86/ia32/Makefile
+++ linux-x86.q/arch/x86/ia32/Makefile
@@ -2,7 +2,8 @@
 # Makefile for the ia32 kernel emulation subsystem.
 #
 
-obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o
+obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o \
+	ia32_binfmt.o
 
 sysv-$(CONFIG_SYSVIPC) := ipc32.o
 obj-$(CONFIG_IA32_EMULATION) += $(sysv-y)
@@ -11,5 +12,3 @@ obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
 
 audit-class-$(CONFIG_AUDIT) := audit.o
 obj-$(CONFIG_IA32_EMULATION) += $(audit-class-y)
-
-obj-$(CONFIG_IA32_EMULATION)		+= ../../../fs/compat_binfmt_elf.o
Index: linux-x86.q/fs/Kconfig.binfmt
===================================================================
--- linux-x86.q.orig/fs/Kconfig.binfmt
+++ linux-x86.q/fs/Kconfig.binfmt
@@ -23,6 +23,16 @@ config BINFMT_ELF
 	  ld.so (check the file <file:Documentation/Changes> for location and
 	  latest version).
 
+# Archs supporting compatibility binfmt_elf shall select HAVE_COMPAT_BINFMT_ELF
+config HAVE_COMPAT_BINFMT_ELF
+
+config COMPAT_BINFMT_ELF
+	bool "Bla"
+	depends on HAVE_COMPAT_BINFMT_ELF
+	depends on MMU
+	help
+	  Bla
+
 config BINFMT_ELF_FDPIC
 	bool "Kernel support for FDPIC ELF binaries"
 	default y
Index: linux-x86.q/fs/Makefile
===================================================================
--- linux-x86.q.orig/fs/Makefile
+++ linux-x86.q/fs/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_BINFMT_ELF)	+= binfmt_elf.o
 obj-$(CONFIG_BINFMT_ELF_FDPIC)	+= binfmt_elf_fdpic.o
 obj-$(CONFIG_BINFMT_SOM)	+= binfmt_som.o
 obj-$(CONFIG_BINFMT_FLAT)	+= binfmt_flat.o
+obj-$(CONFIG_COMPAT_BINFMT_ELF) += compat_binfmt_elf.o
 
 obj-$(CONFIG_FS_MBCACHE)	+= mbcache.o
 obj-$(CONFIG_FS_POSIX_ACL)	+= posix_acl.o xattr_acl.o

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [patch] x86 compat_binfmt_elf, Makefile fixes (was: Re: 2.6.24-rc6-mm1)
  2008-01-02 20:05             ` [patch] x86 compat_binfmt_elf, Makefile fixes (was: Re: 2.6.24-rc6-mm1) Ingo Molnar
@ 2008-01-02 20:32               ` Rafael J. Wysocki
  2008-01-02 20:43                 ` Ingo Molnar
  0 siblings, 1 reply; 146+ messages in thread
From: Rafael J. Wysocki @ 2008-01-02 20:32 UTC (permalink / raw)
  To: Ingo Molnar; +Cc: Sam Ravnborg, Andrew Morton, linux-kernel, Roland McGrath

On Wednesday, 2 of January 2008, Ingo Molnar wrote:
> 
> * Rafael J. Wysocki <rjw@sisk.pl> wrote:
> 
> > > Try to delete your fs/ directory in your output dir. Then I expect 
> > > the same bug to surface again.
> > 
> > It does surface indeed.
> 
> could you try the patch from Sam below - does it fix the problem? 

Well, with this patch applied the compilation reliably fails with:

No rule to make target `arch/x86/ia32/ia32_binfmt.o', needed by `arch/x86/ia32/built-in.o'.

[Do you want the .config, btw?]

Rafael

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [patch] x86 compat_binfmt_elf, Makefile fixes (was: Re: 2.6.24-rc6-mm1)
  2008-01-02 20:32               ` Rafael J. Wysocki
@ 2008-01-02 20:43                 ` Ingo Molnar
  0 siblings, 0 replies; 146+ messages in thread
From: Ingo Molnar @ 2008-01-02 20:43 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Sam Ravnborg, Andrew Morton, linux-kernel, Roland McGrath


* Rafael J. Wysocki <rjw@sisk.pl> wrote:

> On Wednesday, 2 of January 2008, Ingo Molnar wrote:
> > 
> > * Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > 
> > > > Try to delete your fs/ directory in your output dir. Then I expect 
> > > > the same bug to surface again.
> > > 
> > > It does surface indeed.
> > 
> > could you try the patch from Sam below - does it fix the problem? 
> 
> Well, with this patch applied the compilation reliably fails with:
> 
> No rule to make target `arch/x86/ia32/ia32_binfmt.o', needed by 
> `arch/x86/ia32/built-in.o'.
> 
> [Do you want the .config, btw?]

i think i'll wait for Roland and Sam to sort it out.

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 18:29                 ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-02 21:51                   ` Herbert Xu
  2008-01-02 21:57                     ` 2.6.24-rc6-mm1 J. Bruce Fields
  2008-01-04 10:23                     ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 2 replies; 146+ messages in thread
From: Herbert Xu @ 2008-01-02 21:51 UTC (permalink / raw)
  To: Torsten Kaiser
  Cc: Andrew Morton, linux-kernel, Neil Brown, J. Bruce Fields, netdev,
	Tom Tucker

On Wed, Jan 02, 2008 at 07:29:59PM +0100, Torsten Kaiser wrote:
>
> Vanilla 2.6.24-rc6 seems stable. I did not see any crash or warnings.

OK that's great.  The next step would be to try excluding specific git
trees from mm to see if they make a difference.

The two specific trees of interest would be git-nfsd and git-net.

Thanks,
-- 
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 21:51                   ` 2.6.24-rc6-mm1 Herbert Xu
@ 2008-01-02 21:57                     ` J. Bruce Fields
  2008-01-03  5:02                       ` 2.6.24-rc6-mm1 Torsten Kaiser
  2008-01-03 15:37                       ` 2.6.24-rc6-mm1 Torsten Kaiser
  2008-01-04 10:23                     ` 2.6.24-rc6-mm1 Torsten Kaiser
  1 sibling, 2 replies; 146+ messages in thread
From: J. Bruce Fields @ 2008-01-02 21:57 UTC (permalink / raw)
  To: Herbert Xu
  Cc: Torsten Kaiser, Andrew Morton, linux-kernel, Neil Brown, netdev,
	Tom Tucker

On Thu, Jan 03, 2008 at 08:51:54AM +1100, Herbert Xu wrote:
> On Wed, Jan 02, 2008 at 07:29:59PM +0100, Torsten Kaiser wrote:
> >
> > Vanilla 2.6.24-rc6 seems stable. I did not see any crash or warnings.
> 
> OK that's great.  The next step would be to try excluding specific git
> trees from mm to see if they make a difference.
> 
> The two specific trees of interest would be git-nfsd and git-net.

Also, if it's git-nfsd, it'd be useful to test with the current git-nfsd
from the for-mm branch at:

	git://linux-nfs.org/~bfields/linus.git for-mm

and then any bisection results (even partial) from that tree would help
immensely....

--b.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 21:57                     ` 2.6.24-rc6-mm1 J. Bruce Fields
@ 2008-01-03  5:02                       ` Torsten Kaiser
  2008-01-03 15:37                       ` 2.6.24-rc6-mm1 Torsten Kaiser
  1 sibling, 0 replies; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-03  5:02 UTC (permalink / raw)
  To: J. Bruce Fields
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown, netdev, Tom Tucker

On Jan 2, 2008 10:57 PM, J. Bruce Fields <bfields@fieldses.org> wrote:
> On Thu, Jan 03, 2008 at 08:51:54AM +1100, Herbert Xu wrote:
> > On Wed, Jan 02, 2008 at 07:29:59PM +0100, Torsten Kaiser wrote:
> > >
> > > Vanilla 2.6.24-rc6 seems stable. I did not see any crash or warnings.
> >
> > OK that's great.  The next step would be to try excluding specific git
> > trees from mm to see if they make a difference.
> >
> > The two specific trees of interest would be git-nfsd and git-net.
>
> Also, if it's git-nfsd, it'd be useful to test with the current git-nfsd
> from the for-mm branch at:
>
>         git://linux-nfs.org/~bfields/linus.git for-mm
>
> and then any bisection results (even partial) from that tree would help
> immensely....

The problem with that is, that triggering the bug is not easy so
marking anything 'good' is questionable.
This time I needed to compile over 50 packages until it triggered.

I was using 2.6.24-rc6-mm1 again, but with a crude hack (see end of
mail) that I hope should catch any double-frees of skbs.
None of my warnings triggered, only a list corruption again in
svc_xprt_enqueue(), but this time with an additional output about
whats wrong with the list:
[17023.029519] list_add corruption. prev->next should be next
(ffff8100d20ec1c8), but was ffff81009c5a6
c28. (prev=ffff81009c5a6c28).
[17023.029537] ------------[ cut here ]------------
[17023.031445] kernel BUG at lib/list_debug.c:33!
[17023.033280] invalid opcode: 0000 [1] SMP
[17023.034967] last sysfs file:
/sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
[17023.038209] CPU 3
[17023.039047] Modules linked in: radeon drm w83792d ipv6 tuner
tea5767 tda8290 tuner_xc2028 tda9887 tu
ner_simple mt20xx tea5761 tvaudio msp3400 bttv ir_common
compat_ioctl32 videobuf_dma_sg videobuf_core b
tcx_risc usbhid tveeprom videodev hid v4l2_common v4l1_compat sg
pata_amd i2c_nforce2
[17023.039519] Pid: 20564, comm: nfsv4-svc Not tainted 2.6.24-rc6-mm1 #14
[17023.039519] RIP: 0010:[<ffffffff803bd834>]  [<ffffffff803bd834>]
__list_add+0x54/0x60
[17023.039519] RSP: 0018:ffff8101002c9dc0  EFLAGS: 00010282
[17023.039519] RAX: 0000000000000088 RBX: ffff810110125c00 RCX: 0000000000000000
[17023.039519] RDX: ffff81010067c000 RSI: 0000000000000001 RDI: ffffffff80764140
[17023.039519] RBP: ffff8101002c9dc0 R08: 0000000000000001 R09: 0000000000000000
[17023.039519] R10: ffff81000100a088 R11: 0000000000000001 R12: ffff8100d20ec180
[17023.039519] R13: ffff8100d20ec1b8 R14: ffff8100d20ec1b8 R15: ffff8101188e4600
[17023.039519] FS:  00007ff7a870c6f0(0000) GS:ffff81011ff0cd00(0000)
knlGS:0000000000000000
[17023.039519] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[17023.039519] CR2: 00000000024df510 CR3: 0000000032539000 CR4: 00000000000006e0
[17023.039519] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[17023.039519] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[17023.039519] Process nfsv4-svc (pid: 20564, threadinfo
ffff8101002c8000, task ffff81010067c000)
[17023.039519] Stack:  ffff8101002c9e00 ffffffff805c18ab
ffff8100d20ec188 ffff8101188e4600
[17023.039519]  ffff81009c5a6c00 ffff81010d118000 ffff810110125c00
ffff8101188e4610
[17023.039519]  ffff8101002c9e10 ffffffff805c1997 ffff8101002c9ee0
ffffffff805c2ac4
[17023.039519] Call Trace:
[17023.039519]  [<ffffffff805c18ab>] svc_xprt_enqueue+0x1ab/0x240
[17023.039519]  [<ffffffff805c1997>] svc_xprt_received+0x17/0x20
[17023.039519]  [<ffffffff805c2ac4>] svc_recv+0x394/0x7c0
[17023.039519]  [<ffffffff805c1ece>] svc_send+0xae/0xd0
[17023.039519]  [<ffffffff802305f0>] default_wake_function+0x0/0x10
[17023.039519]  [<ffffffff803178b9>] nfs_callback_svc+0x79/0x130
[17023.039519]  [<ffffffff80232a67>] finish_task_switch+0x67/0xe0
[17023.039519]  [<ffffffff8020c4b8>] child_rip+0xa/0x12
[17023.039519]  [<ffffffff8020bbcf>] restore_args+0x0/0x30
[17023.039519]  [<ffffffff805b69cd>] __svc_create_thread+0xdd/0x200
[17023.039519]  [<ffffffff80317840>] nfs_callback_svc+0x0/0x130
[17023.039519]  [<ffffffff8020c4ae>] child_rip+0x0/0x12
[17023.039519]
[17023.039519]
[17023.039519] Code: 0f 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 8b 16 48 89 e5 e8
[17023.039519] RIP  [<ffffffff803bd834>] __list_add+0x54/0x60
[17023.039519]  RSP <ffff8101002c9dc0>
[17023.039524] ---[ end trace a9257b24a4b10968 ]---
[17023.041451] Kernel panic - not syncing: Aiee, killing interrupt handler!

I also wonder if this really is only one bug, or two. (One in skb
handling and one in svc_xprt_enqueue's list code)

Summary of what I think is related to this:

* 2.6.24-rc2-mm1 might not have it, but had a bug in the nfsv4 sillyrenames.
* 2.6.24-rc3-mm1 did not work for me at all (IO-APIC problem)
* 2.6.24-rc3-mm2 has the bug
  - I have seen a crash in ether1394_complete_cb
  - I have seen 3 crashes in svc_xprt_enqueue, two with slub_debug=FZP
  - I have seen a crash in tcp_send_ack -> __alloc_skb
  - patched with svc_xprt_received(&svsk->sk_xprt); removed from
svc_create_socket()
    -> still crashed in svc_xprt_enqueue
  - patched "skb_release_all(dst);" back to "skb_release_data(dst);"
in skb_morph() (net/core/skbuff.c).
    -> seemed to work (200+ packages compiled+installed)
* 2.6.24-rc4-mm1 and -rc5-mm1: not tried, was still testing -rc3-mm2
* 2.6.24-rc6 did not crash, but I did not test it for too long
* 2.6.24-rc6-mm1 has the bug
  - I have seen a crash in skb_release_data with vanilla -mm1
  - patched "skb_release_all(dst);" back to "skb_release_data(dst);" in
skb_morph() (net/core/skbuff.c).
    -> crashed in xs_tcp_data_recv, skb_morph() was not called once
  - patched with notfreed-hack
    -> crashed in svc_xprt_enqueue, skb_morph() was not called once

I will see if I have the time to try git-nfsd, but as I'm not able to
trigger the bug reliable, I will not be able to really declare any
tree unrelated...

Torsten

My skb-double-free-hack: I added a new __u8 field to sk_buff after its
cb field and the following warnings:
--- skbuff.c~   2008-01-03 05:29:32.092408637 +0100
+++ skbuff.c    2008-01-02 23:00:14.114535678 +0100
@@ -205,6 +205,7 @@ struct sk_buff *__alloc_skb(unsigned int
        memset(skb, 0, offsetof(struct sk_buff, tail));
        skb->truesize = size + sizeof(struct sk_buff);
        atomic_set(&skb->users, 1);
+       skb->notfreed=1;
        skb->head = data;
        skb->data = data;
        skb_reset_tail_pointer(skb);
@@ -317,13 +318,18 @@ static void kfree_skbmem(struct sk_buff

        switch (skb->fclone) {
        case SKB_FCLONE_UNAVAILABLE:
+               WARN_ON(!skb->notfreed);
+               skb->notfreed=0;
                kmem_cache_free(skbuff_head_cache, skb);
                break;

        case SKB_FCLONE_ORIG:
                fclone_ref = (atomic_t *) (skb + 2);
-               if (atomic_dec_and_test(fclone_ref))
+               if (atomic_dec_and_test(fclone_ref)) {
+                 WARN_ON(!skb->notfreed);
+                 skb->notfreed=0;
                        kmem_cache_free(skbuff_fclone_cache, skb);
+                }
                break;

        case SKB_FCLONE_CLONE:
@@ -335,8 +341,11 @@ static void kfree_skbmem(struct sk_buff
                 */
                skb->fclone = SKB_FCLONE_UNAVAILABLE;

-               if (atomic_dec_and_test(fclone_ref))
+               if (atomic_dec_and_test(fclone_ref)) {
+                 WARN_ON(!other->notfreed);
+                 other->notfreed=0;
                        kmem_cache_free(skbuff_fclone_cache, other);
+                }
                break;
        }
 }

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 21:57                     ` 2.6.24-rc6-mm1 J. Bruce Fields
  2008-01-03  5:02                       ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-03 15:37                       ` Torsten Kaiser
  2008-01-03 18:52                         ` 2.6.24-rc6-mm1 J. Bruce Fields
  1 sibling, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-03 15:37 UTC (permalink / raw)
  To: J. Bruce Fields
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown, netdev, Tom Tucker

On Jan 2, 2008 10:57 PM, J. Bruce Fields <bfields@fieldses.org> wrote:
> On Thu, Jan 03, 2008 at 08:51:54AM +1100, Herbert Xu wrote:
> > The two specific trees of interest would be git-nfsd and git-net.
>
> Also, if it's git-nfsd, it'd be useful to test with the current git-nfsd
> from the for-mm branch at:
>
>         git://linux-nfs.org/~bfields/linus.git for-mm
>
> and then any bisection results (even partial) from that tree would help
> immensely....

Wrong URL, its (now?) at git://git.linux-nfs.org/projects/bfields/linux.git

Using "HEAD is now at cd7e1c9... Merge commit 'server-xprt-switch^' into for-mm"
I was able to compile&install 54 packages, so this seems to be working.

Now git-fetch'ing
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25.git

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-03 15:37                       ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-03 18:52                         ` J. Bruce Fields
  0 siblings, 0 replies; 146+ messages in thread
From: J. Bruce Fields @ 2008-01-03 18:52 UTC (permalink / raw)
  To: Torsten Kaiser
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown, netdev, Tom Tucker

On Thu, Jan 03, 2008 at 04:37:46PM +0100, Torsten Kaiser wrote:
> On Jan 2, 2008 10:57 PM, J. Bruce Fields <bfields@fieldses.org> wrote:
> > On Thu, Jan 03, 2008 at 08:51:54AM +1100, Herbert Xu wrote:
> > > The two specific trees of interest would be git-nfsd and git-net.
> >
> > Also, if it's git-nfsd, it'd be useful to test with the current git-nfsd
> > from the for-mm branch at:
> >
> >         git://linux-nfs.org/~bfields/linus.git for-mm
> >
> > and then any bisection results (even partial) from that tree would help
> > immensely....
> 
> Wrong URL, its (now?) at git://git.linux-nfs.org/projects/bfields/linux.git

Whoops, apologies.  Actually, the only change required should have been
to change "linus" to "linux".  I should cut-n-paste and not relying on
typing it right each time....

> Using "HEAD is now at cd7e1c9... Merge commit 'server-xprt-switch^' into for-mm"
> I was able to compile&install 54 packages, so this seems to be working.

Hm, OK, thanks again for all this followup.

--b.

> 
> Now git-fetch'ing
> git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25.git

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 21:51                   ` 2.6.24-rc6-mm1 Herbert Xu
  2008-01-02 21:57                     ` 2.6.24-rc6-mm1 J. Bruce Fields
@ 2008-01-04 10:23                     ` Torsten Kaiser
  2008-01-04 13:30                       ` 2.6.24-rc6-mm1 Jarek Poplawski
  1 sibling, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-04 10:23 UTC (permalink / raw)
  To: Herbert Xu
  Cc: Andrew Morton, linux-kernel, Neil Brown, J. Bruce Fields, netdev,
	Tom Tucker

On Jan 2, 2008 10:51 PM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
> On Wed, Jan 02, 2008 at 07:29:59PM +0100, Torsten Kaiser wrote:
> >
> > Vanilla 2.6.24-rc6 seems stable. I did not see any crash or warnings.
>
> OK that's great.  The next step would be to try excluding specific git
> trees from mm to see if they make a difference.
>
> The two specific trees of interest would be git-nfsd and git-net.

git-nfsd from git://git.linux-nfs.org/projects/bfields/linux.git#for-mm
-> compiling and installing 54 packages worked without crashes.

git-net from git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25.git
-> compiling and installing 95 packages worked without crashes.

The only thing in the announces of 2.6.24-rc3-mm1/2 that stands out for me is:
+iommu-sg-merging-add-device_dma_parameters-structure.patch
+iommu-sg-merging-pci-add-device_dma_parameters-support.patch
+iommu-sg-merging-x86-make-pci-gart-iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-ppc-make-iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-ia64-make-sba_iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-alpha-make-pci_iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-sparc64-make-iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-parisc-make-iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-call-blk_queue_segment_boundary-in-__scsi_alloc_queue.patch
+iommu-sg-merging-sata_inic162x-use-pci_set_dma_max_seg_size.patch
+iommu-sg-merging-aacraid-use-pci_set_dma_max_seg_size.patch

 iommu work

I will enable CONFIG_IOMMU_DEBUG in -rc6-mm1 and see, as otherwise I
have no clue where to look...

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-04 10:23                     ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-04 13:30                       ` Jarek Poplawski
  2008-01-04 15:21                         ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 1 reply; 146+ messages in thread
From: Jarek Poplawski @ 2008-01-04 13:30 UTC (permalink / raw)
  To: Torsten Kaiser
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

On 04-01-2008 11:23, Torsten Kaiser wrote:
> On Jan 2, 2008 10:51 PM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
>> On Wed, Jan 02, 2008 at 07:29:59PM +0100, Torsten Kaiser wrote:
>>> Vanilla 2.6.24-rc6 seems stable. I did not see any crash or warnings.
>> OK that's great.  The next step would be to try excluding specific git
>> trees from mm to see if they make a difference.
>>
>> The two specific trees of interest would be git-nfsd and git-net.
> 
> git-nfsd from git://git.linux-nfs.org/projects/bfields/linux.git#for-mm
> -> compiling and installing 54 packages worked without crashes.
> 
> git-net from git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25.git
> -> compiling and installing 95 packages worked without crashes.
...
> I will enable CONFIG_IOMMU_DEBUG in -rc6-mm1 and see, as otherwise I
> have no clue where to look...

Hi,

A few questions/suggestions:

- is it still vanilla -rc6-mm1; I've seen on kernel list you tried
some fixes around raid?

- could you remind this lockdep warning; is it always and the same,
always before crash, or no rules?

- I've seen you looked after double freeing, but this last debug list
warning could suggest locking problems during list modification too.

- above git-nfsd and git-net tests should be probably repeated with
-rc6-mm1 git versions: so vanilla rc6 plus both these -mm patches
only, and if bug triggers, with one reversed; btw., since in previous
message you mentioned that 50 packages could be not enough to trigger
this, these 54 above could make too little margin yet.

Regards,
Jarek P.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-04 13:30                       ` 2.6.24-rc6-mm1 Jarek Poplawski
@ 2008-01-04 15:21                         ` Torsten Kaiser
  2008-01-04 21:24                           ` 2.6.24-rc6-mm1 Torsten Kaiser
  2008-01-05  0:07                           ` 2.6.24-rc6-mm1 Jarek Poplawski
  0 siblings, 2 replies; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-04 15:21 UTC (permalink / raw)
  To: Jarek Poplawski
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

On Jan 4, 2008 2:30 PM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> On 04-01-2008 11:23, Torsten Kaiser wrote:
> > On Jan 2, 2008 10:51 PM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
> >> On Wed, Jan 02, 2008 at 07:29:59PM +0100, Torsten Kaiser wrote:
> >>> Vanilla 2.6.24-rc6 seems stable. I did not see any crash or warnings.
> >> OK that's great.  The next step would be to try excluding specific git
> >> trees from mm to see if they make a difference.
> >>
> >> The two specific trees of interest would be git-nfsd and git-net.
> >
> > git-nfsd from git://git.linux-nfs.org/projects/bfields/linux.git#for-mm
> > -> compiling and installing 54 packages worked without crashes.
> >
> > git-net from git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25.git
> > -> compiling and installing 95 packages worked without crashes.
> ...
> > I will enable CONFIG_IOMMU_DEBUG in -rc6-mm1 and see, as otherwise I
> > have no clue where to look...
>
> Hi,
>
> A few questions/suggestions:

I'm open for any suggestions and will try to answer any questions.
The only thing that is sadly not practical is bisecting the borkenout
mm-patches, as triggering this error is to unreliable /
time-consuming.

> - is it still vanilla -rc6-mm1; I've seen on kernel list you tried
> some fixes around raid?

Yes, without these fixes I can't boot.
But they should only be run during starting the arrays, so I doubt
that this is that cause.
(Also -rc3-mm2 did not need this fix)

My skbuff-double-free-detector is still in there, but was never triggered.

> - could you remind this lockdep warning; is it always and the same,
> always before crash, or no rules?

???
I see no lockdep warning before the crashes.
I have seen a warning about the dst->__refcnt in dst_release and
different warnings about list operations.

I think I have always posted everything I have seen before the
crashes. (captured via serial console)

(If you mean the lockdep-problem in -rc6: That is more or less a
missing annotation during early bootup. The only problem with that is,
that it will causes lockdep to be turned off and so it can not be used
to find any real problem. A fix for that is in -mm so I do have
lockdep on the mm-kernels)

> - I've seen you looked after double freeing, but this last debug list
> warning could suggest locking problems during list modification too.

Yes, but Herbert mentioned double freeing a skb explicit and so I
tried to catch this.
I do not know enough about the network core to verify the locking of
the involved lists.

> - above git-nfsd and git-net tests should be probably repeated with
> -rc6-mm1 git versions: so vanilla rc6 plus both these -mm patches
> only, and if bug triggers, with one reversed; btw., since in previous
> message you mentioned that 50 packages could be not enough to trigger
> this, these 54 above could make too little margin yet.

Yes, I think I really need to redo the git-nfsd-test.
With IOMMU_DEBUG enabled rc6-mm1worked for 52 packages, only a secound
run of kde-packages triggered it after only 5 packages.
I don't know what this bug hates about kdeartwork-wallpaper (triggered
it this time) or kdeartwork-styles.

Output from the crash with IOMMU_DEBUG (lockdep was enabled, but did
not trigger):
[15593.236374] Unable to handle kernel NULL pointer
dereference<3>list_add corruption. prev->next should be next
(ffffffff8078a410), but was ffff81011ec01e68. (prev=ffff81011ec01e68).
[15593.236374]  at 0000000000000000 RIP:
[15593.236374]  [<0000000000000000>]
[15593.236374] PGD 79d22067 PUD 7acd7067 PMD 0
[15593.236374] Oops: 0010 [1] SMP
[15593.236374] last sysfs file:
/sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
[15593.236374] CPU 2
[15593.236374] Modules linked in: radeon drm w83792d ipv6 tuner
tea5767 tda8290 tuner_xc2028 tda9887 tuner_simple mt20xx tea5761
tvaudio msp3400 bttv ir_common compat_ioctl32 videobuf_dma_sg
videobuf_core btcx_risc tveeprom videodev usbhid v4l2_common
v4l1_compat sg hid pata_amd i2c_nforce2
[15593.236374] Pid: 510, comm: khpsbpkt Not tainted 2.6.24-rc6-mm1 #15
[15593.236374] RIP: 0010:[<0000000000000000>]  [<0000000000000000>]
[15593.236374] RSP: 0018:ffff81007eed3ee8  EFLAGS: 00010206
[15593.236374] RAX: ffff81007eed3ef0 RBX: ffff81011ec01e40 RCX: ffff81011ec01e40
[15593.236374] RDX: ffff81011ec01e68 RSI: ffff81011ec01e68 RDI: 0000000000000000
[15593.236374] RBP: ffff81007eed3f10 R08: 0000000000000000 R09: 0000000000000001
[15593.236374] R10: 0000000000000001 R11: 0000000000000058 R12: ffff81007eed3ef0
[15593.236374] R13: ffffffff80470e50 R14: 0000000000000000 R15: 0000000000000000
[15593.236374] FS:  00007f76e6c98700(0000) GS:ffff81011ff1f000(0000)
knlGS:00000000556f46c0
[15593.236374] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[15593.236374] CR2: 0000000000000000 CR3: 0000000079d29000 CR4: 00000000000006e0
[15593.236374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[15593.236374] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[15593.236374] Process khpsbpkt (pid: 510, threadinfo
ffff81007eed2000, task ffff81007eed0000)
[15593.236374] Stack:  ffffffff80470f0b ffff81011ec01e68
ffff81011ec014a8 00000000fffffffc
[15593.236374]  0000000000000000 ffff81007eed3f40 ffffffff8024d72d
00000000000001fb
[15593.236374]  ffff81007ff2bd98 00000000000001fb ffff81007ff2bcf0
ffff81007ff2df40
[15593.236374] Call Trace:
[15593.236374]  [<ffffffff80470f0b>] hpsbpkt_thread+0xbb/0x140
[15593.236374]  [<ffffffff8024d72d>] kthread+0x4d/0x80
[15593.236374]  [<ffffffff8020c4b8>] child_rip+0xa/0x12
[15593.236374]  [<ffffffff8020bbcf>] restore_args+0x0/0x30
[15593.236374]  [<ffffffff8024d6e0>] kthread+0x0/0x80
[15593.236374]  [<ffffffff8020c4ae>] child_rip+0x0/0x12
[15593.236374]
[15593.236374]
[15593.236374] Code:  Bad RIP value.
[15593.236374] RIP  [<0000000000000000>]
[15593.236374]  RSP <ffff81007eed3ee8>
[15593.236374] CR2: 0000000000000000
[15593.236377] ---[ end trace 11d2dc0fdbe1651f ]---
[15627.875963] ------------[ cut here ]------------
[15627.875963] kernel BUG at lib/list_debug.c:33!
[15627.875963] invalid opcode: 0000 [2] SMP
[15627.875963] last sysfs file:
/sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
[15627.875963] CPU 3
[15627.875963] Modules linked in: radeon drm w83792d ipv6 tuner
tea5767 tda8290 tuner_xc2028 tda9887 tuner_simple mt20xx tea5761
tvaudio msp3400 bttv ir_common compat_ioctl32 videobuf_dma_sg
videobuf_core btcx_risc tveeprom videodev usbhid v4l2_common
v4l1_compat sg hid pata_amd i2c_nforce2
[15627.875963] Pid: 6258, comm: nxssh Tainted: G      D 2.6.24-rc6-mm1 #15
[15627.875963] RIP: 0010:[<ffffffff803bd954>]  [<ffffffff803bd954>]
__list_add+0x54/0x60
[15627.875963] RSP: 0000:ffff81007ffb3c80  EFLAGS: 00010082
[15627.875963] RAX: 0000000000000079 RBX: 0000000000000082 RCX: 000000000000b9f1
[15627.875963] RDX: 0000000000001514 RSI: 0000000000000001 RDI: ffffffff807641c0
[15627.875963] RBP: ffff81007ffb3c80 R08: 0000000000000001 R09: 0000000000000010
[15627.875963] R10: 0000000000000000 R11: 0000000000000020 R12: ffff81011ec01e40
[15627.875963] R13: ffff81011ec01e68 R14: 0000000000000002 R15: ffff81007eee2000
[15627.875963] FS:  00007f3531da2700(0000) GS:ffff81011ff1f280(0000)
knlGS:00000000556f46c0
[15627.875963] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[15627.875963] CR2: 00007ff643d49fe0 CR3: 0000000079c37000 CR4: 00000000000006e0
[15627.875963] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[15627.875963] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[15627.875963] Process nxssh (pid: 6258, threadinfo ffff810079d50000,
task ffff810079d4e000)
[15627.875963] Stack:  ffff81007ffb3ca0 ffffffff8046f9e8
ffff81011ec01e40 000000000000000c
[15627.875963]  ffff81007ffb3d40 ffffffff8047027c ffff81007ddd8000
ffff81007ddd8048
[15627.875963]  ffff81007ffb3ce0 ffffffff805d4366 ffff81007ddd8000
000000000000000c
[15627.875963] Call Trace:
[15627.875963]  <IRQ>  [<ffffffff8046f9e8>] queue_packet_complete+0x48/0x80
[15627.875963]  [<ffffffff8047027c>] hpsb_packet_received+0x51c/0x6d0
[15627.875963]  [<ffffffff805d4366>] _spin_unlock+0x26/0x30
[15627.875963]  [<ffffffff8047cc3d>] dma_rcv_tasklet+0x22d/0x430
[15627.875963]  [<ffffffff8021273e>] read_hpet+0xe/0x10
[15627.875963]  [<ffffffff805d48f2>] _spin_unlock_irqrestore+0x42/0x60
[15627.875963]  [<ffffffff8023d8b3>] tasklet_action+0x53/0xd0
[15627.875963]  [<ffffffff8023d754>] __do_softirq+0x84/0x110
[15627.875963]  [<ffffffff8020c82c>] call_softirq+0x1c/0x30
[15627.875963]  [<ffffffff8020eaa5>] do_softirq+0x65/0xc0
[15627.875963]  [<ffffffff8023d6c5>] irq_exit+0x95/0xa0
[15627.875963]  [<ffffffff8020ebbf>] do_IRQ+0x8f/0x100
[15627.875963]  [<ffffffff8020bb26>] ret_from_intr+0x0/0xf
[15627.875963]  <EOI>
[15627.875963]
[15627.875963] Code: 0f 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 8b 16
48 89 e5 e8
[15627.875963] RIP  [<ffffffff803bd954>] __list_add+0x54/0x60
[15627.875963]  RSP <ffff81007ffb3c80>
[15627.875963] ---[ end trace 11d2dc0fdbe1651f ]---
[15627.875963] Kernel panic - not syncing: Aiee, killing interrupt handler!

first oops:
(gdb) list *0xffffffff80470f0b
0xffffffff80470f0b is in hpsbpkt_thread (drivers/ieee1394/ieee1394_core.c:1139).
1134                    INIT_LIST_HEAD(&tmp);
1135                    spin_lock_irq(&pending_packets_lock);
1136                    list_splice_init(&hpsbpkt_queue, &tmp);
1137                    spin_unlock_irq(&pending_packets_lock);
1138
1139                    list_for_each_entry_safe(packet, p, &tmp, queue) {
1140                            list_del_init(&packet->queue);
1141                            packet->complete_routine(packet->complete_data);
1142                    }
1143

second oops:
(gdb) list *0xffffffff8046f9e8
0xffffffff8046f9e8 is in queue_packet_complete
(drivers/ieee1394/ieee1394_core.c:1115).
1110                    return;
1111            }
1112            if (packet->complete_routine != NULL) {
1113                    spin_lock_irqsave(&pending_packets_lock, flags);
1114                    list_add_tail(&packet->queue, &hpsbpkt_queue);
1115                    spin_unlock_irqrestore(&pending_packets_lock, flags);
1116                    wake_up_process(khpsbpkt_thread);
1117            }
1118            return;
1119    }

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-04 15:21                         ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-04 21:24                           ` Torsten Kaiser
  2008-01-05  0:07                           ` 2.6.24-rc6-mm1 Jarek Poplawski
  1 sibling, 0 replies; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-04 21:24 UTC (permalink / raw)
  To: Jarek Poplawski
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

On Jan 4, 2008 4:21 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> On Jan 4, 2008 2:30 PM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> > - above git-nfsd and git-net tests should be probably repeated with
> > -rc6-mm1 git versions: so vanilla rc6 plus both these -mm patches
> > only, and if bug triggers, with one reversed; btw., since in previous
> > message you mentioned that 50 packages could be not enough to trigger
> > this, these 54 above could make too little margin yet.
>
> Yes, I think I really need to redo the git-nfsd-test.
> With IOMMU_DEBUG enabled rc6-mm1worked for 52 packages, only a secound
> run of kde-packages triggered it after only 5 packages.
> I don't know what this bug hates about kdeartwork-wallpaper (triggered
> it this time) or kdeartwork-styles.

49 more (kde-)packages did work too. Still looks like it is only in -mm.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-04 15:21                         ` 2.6.24-rc6-mm1 Torsten Kaiser
  2008-01-04 21:24                           ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-05  0:07                           ` Jarek Poplawski
  2008-01-05  8:01                             ` 2.6.24-rc6-mm1 Torsten Kaiser
  1 sibling, 1 reply; 146+ messages in thread
From: Jarek Poplawski @ 2008-01-05  0:07 UTC (permalink / raw)
  To: Torsten Kaiser
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

On Fri, Jan 04, 2008 at 04:21:26PM +0100, Torsten Kaiser wrote:
> On Jan 4, 2008 2:30 PM, Jarek Poplawski <jarkao2@gmail.com> wrote:
...
> I'm open for any suggestions and will try to answer any questions.

I'm very glad, thanks!

> The only thing that is sadly not practical is bisecting the borkenout
> mm-patches, as triggering this error is to unreliable /
> time-consuming.

Right, but it seems there are these 2 main suspects here...

> > - is it still vanilla -rc6-mm1; I've seen on kernel list you tried
> > some fixes around raid?
> 
> Yes, without these fixes I can't boot.
> But they should only be run during starting the arrays, so I doubt
> that this is that cause.
> (Also -rc3-mm2 did not need this fix)

You've written vanilla -rc6 is OK. Does it mean -rc6 with these fixes?
I think it would be easier just to start with this working -rc6 and
simply check if we have 'right' suspects, so: git-net.patch and
git-nfsd.patch from -mm1-broken-out, as suggested by Herbert (I hope,
can compile - otherwise you could try the other way: add the whole -mm
and revert these two). Using current gits could complicate this
"investigation". 

> My skbuff-double-free-detector is still in there, but was never triggered.
> 
> > - could you remind this lockdep warning; is it always and the same,
> > always before crash, or no rules?
> 
> ???
> I see no lockdep warning before the crashes.
> I have seen a warning about the dst->__refcnt in dst_release and
> different warnings about list operations.
> 
> I think I have always posted everything I have seen before the
> crashes. (captured via serial console)

So, you mean there are no more of these?:
 
"looked into the log in question and the only other warning was a
 circular locking dependency that lockdep detected around 1.5 hour
 before this warning."
...
"[ 7620.845168] INFO: lockdep is turned off."

> (If you mean the lockdep-problem in -rc6: That is more or less a
> missing annotation during early bootup. The only problem with that is,
> that it will causes lockdep to be turned off and so it can not be used
> to find any real problem. A fix for that is in -mm so I do have
> lockdep on the mm-kernels)
> 
> > - I've seen you looked after double freeing, but this last debug list
> > warning could suggest locking problems during list modification too.
> 
> Yes, but Herbert mentioned double freeing a skb explicit and so I
> tried to catch this.
> I do not know enough about the network core to verify the locking of
> the involved lists.

Right, the list corruption could be because of use after freeing too.

> > - above git-nfsd and git-net tests should be probably repeated with
> > -rc6-mm1 git versions: so vanilla rc6 plus both these -mm patches
> > only, and if bug triggers, with one reversed; btw., since in previous
> > message you mentioned that 50 packages could be not enough to trigger
> > this, these 54 above could make too little margin yet.
> 
> Yes, I think I really need to redo the git-nfsd-test.
> With IOMMU_DEBUG enabled rc6-mm1worked for 52 packages, only a secound
> run of kde-packages triggered it after only 5 packages.
> I don't know what this bug hates about kdeartwork-wallpaper (triggered
> it this time) or kdeartwork-styles.

I didn't read all this thread, so probably I miss many points, but are
you sure there are no problems with filesystem corruption around these
packets or where you compile(?) them (e.g. after these raid problems)?

> Output from the crash with IOMMU_DEBUG (lockdep was enabled, but did
> not trigger):
> [15593.236374] Unable to handle kernel NULL pointer
> dereference<3>list_add corruption. prev->next should be next

Fine! I'll try to look at this. BTW, I guess/hope DEBUG_SLAB etc. are
also on...

Thanks,
Jarek P.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-05  0:07                           ` 2.6.24-rc6-mm1 Jarek Poplawski
@ 2008-01-05  8:01                             ` Torsten Kaiser
  2008-01-05 10:13                               ` 2.6.24-rc6-mm1 Jarek Poplawski
  0 siblings, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-05  8:01 UTC (permalink / raw)
  To: Jarek Poplawski
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

On Jan 5, 2008 1:07 AM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> On Fri, Jan 04, 2008 at 04:21:26PM +0100, Torsten Kaiser wrote:
> > On Jan 4, 2008 2:30 PM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> > The only thing that is sadly not practical is bisecting the borkenout
> > mm-patches, as triggering this error is to unreliable /
> > time-consuming.
>
> Right, but it seems there are these 2 main suspects here...
>
> > > - is it still vanilla -rc6-mm1; I've seen on kernel list you tried
> > > some fixes around raid?
> >
> > Yes, without these fixes I can't boot.
> > But they should only be run during starting the arrays, so I doubt
> > that this is that cause.
> > (Also -rc3-mm2 did not need this fix)
>
> You've written vanilla -rc6 is OK. Does it mean -rc6 with these fixes?

vanilla -rc6 is fine without these fixes.
The raid-bugs from -rc6-mm1 are probably introduced by
md-allow-devices-to-be-shared-between-md-arrays.patch and that patch
is new in this mm-release.

> I think it would be easier just to start with this working -rc6 and
> simply check if we have 'right' suspects, so: git-net.patch and
> git-nfsd.patch from -mm1-broken-out, as suggested by Herbert (I hope,
> can compile - otherwise you could try the other way: add the whole -mm
> and revert these two). Using current gits could complicate this
> "investigation".

OK, I will try this...

> > My skbuff-double-free-detector is still in there, but was never triggered.
> >
> > > - could you remind this lockdep warning; is it always and the same,
> > > always before crash, or no rules?
> >
> > ???
> > I see no lockdep warning before the crashes.
> > I have seen a warning about the dst->__refcnt in dst_release and
> > different warnings about list operations.
> >
> > I think I have always posted everything I have seen before the
> > crashes. (captured via serial console)
>
> So, you mean there are no more of these?:
>
> "looked into the log in question and the only other warning was a
>  circular locking dependency that lockdep detected around 1.5 hour
>  before this warning."
> ...
> "[ 7620.845168] INFO: lockdep is turned off."

Aha, I had forgotten about that one.
Looking at all the crashlogs, I do not find another one of this lockdep warning.
The only other lockdep related output was the bootup problem in vanilla -rc6.

> > (If you mean the lockdep-problem in -rc6: That is more or less a
> > missing annotation during early bootup. The only problem with that is,
> > that it will causes lockdep to be turned off and so it can not be used
> > to find any real problem. A fix for that is in -mm so I do have
> > lockdep on the mm-kernels)
> >
> > > - I've seen you looked after double freeing, but this last debug list
> > > warning could suggest locking problems during list modification too.
> >
> > Yes, but Herbert mentioned double freeing a skb explicit and so I
> > tried to catch this.
> > I do not know enough about the network core to verify the locking of
> > the involved lists.
>
> Right, the list corruption could be because of use after freeing too.

I had hoped that I could catch use-after-freeing by using
slub_debug=FZP, but that did not help.
(first oops in http://lkml.org/lkml/2007/12/28/159 )

I think that the main skb structs come from slub and should be
poisoned by this, so it might be some other data structure that is
allocated differently...

> > > - above git-nfsd and git-net tests should be probably repeated with
> > > -rc6-mm1 git versions: so vanilla rc6 plus both these -mm patches
> > > only, and if bug triggers, with one reversed; btw., since in previous
> > > message you mentioned that 50 packages could be not enough to trigger
> > > this, these 54 above could make too little margin yet.
> >
> > Yes, I think I really need to redo the git-nfsd-test.
> > With IOMMU_DEBUG enabled rc6-mm1worked for 52 packages, only a secound
> > run of kde-packages triggered it after only 5 packages.
> > I don't know what this bug hates about kdeartwork-wallpaper (triggered
> > it this time) or kdeartwork-styles.
>
> I didn't read all this thread, so probably I miss many points, but are
> you sure there are no problems with filesystem corruption around these
> packets or where you compile(?) them (e.g. after these raid problems)?

For my setup: It's a gentoo system, so compiling packages is the
normal way of installing something.
The compile itself is done on a tmpfs so a filesystem corruption there
should be rather impossible. ;)
(The system has 4Gb RAM, so it doesn't even need to swap)
The sources are taken from a nfsv4 share that is served from a
different system. Also gentoo checksums all sources it will use.

After the crashes I also did a checksum of the last installed
packages. Only in one instance there was corruption, all new files
where completely empty. Obviously XFS did not have the time to write
them back to disk before the system crashed.
Also as all crashes show network related traces and the system is
working fine otherwise, I doubt any permanent filesystem problems.

For the raid problems: I was just unable to even start the raid that
has / on it, because of a wrong check in the raid-autostart code.
( http://lkml.org/lkml/2007/12/27/45 )

> > Output from the crash with IOMMU_DEBUG (lockdep was enabled, but did
> > not trigger):
> > [15593.236374] Unable to handle kernel NULL pointer
> > dereference<3>list_add corruption. prev->next should be next
>
> Fine! I'll try to look at this. BTW, I guess/hope DEBUG_SLAB etc. are
> also on...

DEBUG_SLAB is off, because of:
 CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y

But I'm currently did not have the slub_debug-option in my kernel
commandline, because:
a) slub_debug=FZP did not prevent the bug in -rc3-mm2
b) but it took a much longer time to trigger it
c) its a serious slowdown for these compiles

If you think some other slub_debug might catch it, I would try this...

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-05  8:01                             ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-05 10:13                               ` Jarek Poplawski
  2008-01-05 14:52                                 ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 1 reply; 146+ messages in thread
From: Jarek Poplawski @ 2008-01-05 10:13 UTC (permalink / raw)
  To: Torsten Kaiser
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

On Sat, Jan 05, 2008 at 09:01:02AM +0100, Torsten Kaiser wrote:
> On Jan 5, 2008 1:07 AM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> > On Fri, Jan 04, 2008 at 04:21:26PM +0100, Torsten Kaiser wrote:
> > > On Jan 4, 2008 2:30 PM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> > > The only thing that is sadly not practical is bisecting the borkenout
> > > mm-patches, as triggering this error is to unreliable /
> > > time-consuming.
> >
> > Right, but it seems there are these 2 main suspects here...
> >
> > > > - is it still vanilla -rc6-mm1; I've seen on kernel list you tried
> > > > some fixes around raid?
> > >
> > > Yes, without these fixes I can't boot.
> > > But they should only be run during starting the arrays, so I doubt
> > > that this is that cause.
> > > (Also -rc3-mm2 did not need this fix)
> >
> > You've written vanilla -rc6 is OK. Does it mean -rc6 with these fixes?
> 
> vanilla -rc6 is fine without these fixes.
> The raid-bugs from -rc6-mm1 are probably introduced by
> md-allow-devices-to-be-shared-between-md-arrays.patch and that patch
> is new in this mm-release.
> 
> > I think it would be easier just to start with this working -rc6 and
> > simply check if we have 'right' suspects, so: git-net.patch and
> > git-nfsd.patch from -mm1-broken-out, as suggested by Herbert (I hope,
> > can compile - otherwise you could try the other way: add the whole -mm
> > and revert these two). Using current gits could complicate this
> > "investigation".
> 
> OK, I will try this...

It seems that this last report gives the third one: ieee1394 to the pack,
so probably, you can hold on a "minute" - this all needs some rethinking.
(But, if you've begun with this already, let it be clear at last too.)

> > I didn't read all this thread, so probably I miss many points, but are
> > you sure there are no problems with filesystem corruption around these
> > packets or where you compile(?) them (e.g. after these raid problems)?
> 
> For my setup: It's a gentoo system, so compiling packages is the
> normal way of installing something.
> The compile itself is done on a tmpfs so a filesystem corruption there
> should be rather impossible. ;)
> (The system has 4Gb RAM, so it doesn't even need to swap)
> The sources are taken from a nfsv4 share that is served from a
> different system. Also gentoo checksums all sources it will use.

Yes, since this was no problem with vanilla 2.6.24-rc6, I've probably
gone astray...

> If you think some other slub_debug might catch it, I would try this...

OK! But, in the meantime could you send your current .config? I wonder
e.g. if there could be used this new ieee1394 code from
init_ohci1394_dma.c?
 
You are really helpful, thanks,
Jarek P.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-05 10:13                               ` 2.6.24-rc6-mm1 Jarek Poplawski
@ 2008-01-05 14:52                                 ` Torsten Kaiser
  2008-01-05 22:10                                   ` 2.6.24-rc6-mm1 Torsten Kaiser
  2008-01-06  8:27                                   ` 2.6.24-rc6-mm1 Jarek Poplawski
  0 siblings, 2 replies; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-05 14:52 UTC (permalink / raw)
  To: Jarek Poplawski
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

[-- Attachment #1: Type: text/plain, Size: 3238 bytes --]

On Jan 5, 2008 11:13 AM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> On Sat, Jan 05, 2008 at 09:01:02AM +0100, Torsten Kaiser wrote:
> > On Jan 5, 2008 1:07 AM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> > > I think it would be easier just to start with this working -rc6 and
> > > simply check if we have 'right' suspects, so: git-net.patch and
> > > git-nfsd.patch from -mm1-broken-out, as suggested by Herbert (I hope,
> > > can compile - otherwise you could try the other way: add the whole -mm
> > > and revert these two). Using current gits could complicate this
> > > "investigation".
> >
> > OK, I will try this...

still on the todo-list, I had no time to try this yet...

> It seems that this last report gives the third one: ieee1394 to the pack,
> so probably, you can hold on a "minute" - this all needs some rethinking.
> (But, if you've begun with this already, let it be clear at last too.)

I don't think ieee1394 is to blame here. See http://lkml.org/lkml/2007/11/29/372
This was the first report of these crashes.
The first one is a similar crash in the ieee1394 code and my first try
was to blame it. But switching to a real network card did not solve
this, as the second crash in that mail shows.
Also Stefan Richter said in http://lkml.org/lkml/2007/11/29/419 this:
"FWIW, eth1394 and the entire rest of the 1394 stack beneath eth1394
are identical between -mm and Linus' tree."

I'm still using the old ieee1394-stack and not the new firewire one,
as eth1394 had not been ported at that time.

It might be possible that these are two different bugs, but two bugs
with same symptom's of corrupted lists at the same time seem unlikely.
(Especially  this last report of the oops in 1394 looks rather
strange. Things can only go onto hpsbpkt_queue if they have a non NULL
complete_routine. (see queue_packet_complete() in
drivers/ieee1394/ieee1394_core.c). But a call to a NULL
complete_routine seems to be the cause of one of the two oopses. So it
looks like the hpsbpkt_queue list got mangled. But this list is only
used in this file and all three places that access this list are
protected by spinlocking pending_packets_lock.

So my personal conclusion would be, that someone is writing to memory
that he no longer owns. Most probably 0-bytes. (the complete_routine
got NULLed and the warning about dst->__refcnt being 0).

Use-after-free or something else?

[snip]
> > If you think some other slub_debug might catch it, I would try this...
>
> OK! But, in the meantime could you send your current .config?

Attached. (Last one I was using with 2.6.24-rc6-mm1. For all other
tests I copied this one and did a make oldconfig)

> I wonder
> e.g. if there could be used this new ieee1394 code from
> init_ohci1394_dma.c?

Interesting. I didn't even know about this file / option.

But four things make an involvement rather doubtful:
a) I do not find a single line like "init_ohci1394_dma: initializing
OHCI-1394" in any of the syslogs.
b) I do not have the parameter ohci1394_dma=early set
c) # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
d) I have seen the crash in svc_xprt_enqueue() without eth1394 and at
that try there was not a single firewire device attached.

I will now try broken-out-patches...

Torsten

[-- Attachment #2: 2.6.24-rc6-mm1-config.txt --]
[-- Type: text/plain, Size: 51491 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6-mm1
# Fri Jan  4 11:22:50 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_ARCH_SUPPORTS_KVM=y
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NUMA=y
# CONFIG_K8_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_THREAD_ORDER=1
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
CONFIG_TCP_MD5SIG=y
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_RCSIMPLE=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
# CONFIG_NET_9P_DEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_FJKEYINF is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
CONFIG_SATA_SIL24=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y

#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
CONFIG_WLAN_80211=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_USB_ATMEL=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
# CONFIG_RTL8180 is not set
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_ATH5K=m
CONFIG_IWL4965=m
CONFIG_IWL4965_QOS=y
CONFIG_IWL4965_SPECTRUM_MEASUREMENT=y
CONFIG_IWL4965_SENSITIVITY=y
# CONFIG_IWL4965_DEBUG is not set
CONFIG_IWL3945=m
CONFIG_IWL3945_QOS=y
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
# CONFIG_IWL3945_DEBUG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43_DMA=y
CONFIG_B43_PIO=y
CONFIG_B43_DMA_AND_PIO_MODE=y
# CONFIG_B43_DMA_MODE is not set
# CONFIG_B43_PIO_MODE is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
# CONFIG_RT2X00_DEBUG is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
CONFIG_SHAPER=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_OZ99X is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m

#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_SAA6588 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR=y
CONFIG_VIDEO_PVRUSB2_ONAIR_USB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_ZR364XX=m
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_TUNER=m
# CONFIG_VIDEO_TUNER_CUSTOMIZE is not set
CONFIG_TUNER_XC2028=m
CONFIG_TUNER_MT20XX=m
CONFIG_TUNER_TDA8290=m
CONFIG_TUNER_TEA5761=m
CONFIG_TUNER_TEA5767=m
CONFIG_TUNER_SIMPLE=m
CONFIG_TUNER_TDA9887=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=m
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=y
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# SPI devices
#

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USB_MON is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_GOTEMP=m

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
# CONFIG_LEDS_CLEVO_MAIL is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y

#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m

#
# Layered filesystems
#
# CONFIG_UNION_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp850"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_IOMMU_DEBUG=y
CONFIG_IOMMU_LEAK=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
CONFIG_VIRTUALIZATION=y

#
# Library routines
#
CONFIG_BITREVERSE=m
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 (build problem: gpio/W1)
  2007-12-31 18:19 ` 2.6.24-rc6-mm1 (build problem: gpio/W1) Randy Dunlap
@ 2008-01-05 15:29   ` Evgeniy Polyakov
  2008-01-05 16:16     ` Ville Syrjälä
  0 siblings, 1 reply; 146+ messages in thread
From: Evgeniy Polyakov @ 2008-01-05 15:29 UTC (permalink / raw)
  To: Randy Dunlap; +Cc: Andrew Morton, linux-kernel, david-b, Ville Syrjala

Hi Randy.

Sorry for long delay.

On Mon, Dec 31, 2007 at 10:19:20AM -0800, Randy Dunlap (randy.dunlap@oracle.com) wrote:
>   CC      drivers/w1/masters/w1-gpio.o
> In file included from /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:19:
> include2/asm/gpio.h:4:18: error: gpio.h: No such file or directory
> /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c: In function 'w1_gpio_write_bit_dir':
> /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:26: error: implicit declaration of function 'gpio_direction_input'
> /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:28: error: implicit declaration of function 'gpio_direction_output'

I believe w1-gpio it has to depend on generic gpio, Ville can you
confirm that?

-- 
	Evgeniy Polyakov

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 (build problem: gpio/W1)
  2008-01-05 15:29   ` Evgeniy Polyakov
@ 2008-01-05 16:16     ` Ville Syrjälä
  2008-01-05 17:18       ` Randy Dunlap
  0 siblings, 1 reply; 146+ messages in thread
From: Ville Syrjälä @ 2008-01-05 16:16 UTC (permalink / raw)
  To: Evgeniy Polyakov; +Cc: Randy Dunlap, Andrew Morton, linux-kernel, david-b

On Sat, Jan 05, 2008 at 06:29:04PM +0300, Evgeniy Polyakov wrote:
> Hi Randy.
> 
> Sorry for long delay.
> 
> On Mon, Dec 31, 2007 at 10:19:20AM -0800, Randy Dunlap (randy.dunlap@oracle.com) wrote:
> >   CC      drivers/w1/masters/w1-gpio.o
> > In file included from /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:19:
> > include2/asm/gpio.h:4:18: error: gpio.h: No such file or directory
> > /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c: In function 'w1_gpio_write_bit_dir':
> > /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:26: error: implicit declaration of function 'gpio_direction_input'
> > /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:28: error: implicit declaration of function 'gpio_direction_output'
> 
> I believe w1-gpio it has to depend on generic gpio, Ville can you
> confirm that?

The dependency is there:

config W1_MASTER_GPIO
	tristate "GPIO 1-wire busmaster"
	depends on GENERIC_GPIO

So it looks like the arch Kconfig has selected GENERIC_GPIO but failed
to provide the implementation.

-- 
Ville Syrjälä
syrjala@sci.fi
http://www.sci.fi/~syrjala/

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 (build problem: gpio/W1)
  2008-01-05 16:16     ` Ville Syrjälä
@ 2008-01-05 17:18       ` Randy Dunlap
  0 siblings, 0 replies; 146+ messages in thread
From: Randy Dunlap @ 2008-01-05 17:18 UTC (permalink / raw)
  To: Ville Syrjälä
  Cc: Evgeniy Polyakov, Andrew Morton, linux-kernel, david-b

Ville Syrjälä wrote:
> On Sat, Jan 05, 2008 at 06:29:04PM +0300, Evgeniy Polyakov wrote:
>> Hi Randy.
>>
>> Sorry for long delay.
>>
>> On Mon, Dec 31, 2007 at 10:19:20AM -0800, Randy Dunlap (randy.dunlap@oracle.com) wrote:
>>>   CC      drivers/w1/masters/w1-gpio.o
>>> In file included from /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:19:
>>> include2/asm/gpio.h:4:18: error: gpio.h: No such file or directory
>>> /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c: In function 'w1_gpio_write_bit_dir':
>>> /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:26: error: implicit declaration of function 'gpio_direction_input'
>>> /local/linsrc/linux-2.6.24-rc6-mm1/drivers/w1/masters/w1-gpio.c:28: error: implicit declaration of function 'gpio_direction_output'
>> I believe w1-gpio it has to depend on generic gpio, Ville can you
>> confirm that?
> 
> The dependency is there:
> 
> config W1_MASTER_GPIO
> 	tristate "GPIO 1-wire busmaster"
> 	depends on GENERIC_GPIO
> 
> So it looks like the arch Kconfig has selected GENERIC_GPIO but failed
> to provide the implementation.

There was a follow-up patch in the thread that limits X86_RDC321X
to X86_32 instead of any X86.

-- 
~Randy
desserts:  http://www.xenotime.net/linux/recipes/

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-05 14:52                                 ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-05 22:10                                   ` Torsten Kaiser
  2008-01-06  1:25                                     ` 2.6.24-rc6-mm1 Andrew Morton
  2008-01-06  3:16                                     ` 2.6.24-rc6-mm1 Torsten Kaiser
  2008-01-06  8:27                                   ` 2.6.24-rc6-mm1 Jarek Poplawski
  1 sibling, 2 replies; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-05 22:10 UTC (permalink / raw)
  To: Jarek Poplawski
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

On Jan 5, 2008 3:52 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> On Jan 5, 2008 11:13 AM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> > On Sat, Jan 05, 2008 at 09:01:02AM +0100, Torsten Kaiser wrote:
> > > On Jan 5, 2008 1:07 AM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> > > > I think it would be easier just to start with this working -rc6 and
> > > > simply check if we have 'right' suspects, so: git-net.patch and
> > > > git-nfsd.patch from -mm1-broken-out, as suggested by Herbert (I hope,
> > > > can compile - otherwise you could try the other way: add the whole -mm
> > > > and revert these two). Using current gits could complicate this
> > > > "investigation".
> > >
> > > OK, I will try this...
>
> still on the todo-list, I had no time to try this yet...

working on it...
2.6.24-rc6 + mm-patches up to git.battery (includes git-net and
git-netdev-all) worked for 110 packages, then I proclaimed it good.
2.6.24-rc6 + mm-patches up to (including) git.nfsd is currently
getting testet (9 packages done...)

But the cause of my mail is the following question:
Regarding my "iommu-sg-merging-patches are new in -rc3-mm and could be
the cause"-suspicion I looked at these patches and came across these
hunks:

This is removed from arch/x86/lib/bitstr_64.c:
-/* Find string of zero bits in a bitmap */
-unsigned long
-find_next_zero_string(unsigned long *bitmap, long start, long nbits, int len)
-{
-       unsigned long n, end, i;
-
- again:
-       n = find_next_zero_bit(bitmap, nbits, start);
-       if (n == -1)
-               return -1;
-
-       /* could test bitsliced, but it's hardly worth it */
-       end = n+len;
-       if (end > nbits)
-               return -1;
-       for (i = n+1; i < end; i++) {
-               if (test_bit(i, bitmap)) {
-                       start = i+1;
-                       goto again;
-               }
-       }
-       return n;
-}

This is added to lib/iommu-helper.c:
+static unsigned long find_next_zero_area(unsigned long *map,
+                                        unsigned long size,
+                                        unsigned long start,
+                                        unsigned int nr)
+{
+       unsigned long index, end, i;
+again:
+       index = find_next_zero_bit(map, size, start);
+       end = index + nr;
+       if (end > size)
+               return -1;
+       for (i = index + 1; i < end; i++) {
+               if (test_bit(i, map)) {
+                       start = i+1;
+                       goto again;
+               }
+       }
+       return index;
+}

The old version checks, if find_next_zero_bit returns -1, the new
version doesn't do this.
Is this intended and can find_next_zero_bit never fail?
Hmm... but in the worst case it should only loop forever if I'm
reading this right (index = -1 => for-loop counts from 0 to nr, if any
bit is set it will jump to "again:" and if the next call to
find_next_zero_bit also fails, its an endless loop)

So even if this can not explain my bug, could somebody check if this
is a real bug or not?

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-05 22:10                                   ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-06  1:25                                     ` Andrew Morton
  2008-01-06  3:28                                       ` 2.6.24-rc6-mm1 FUJITA Tomonori
  2008-01-06  3:16                                     ` 2.6.24-rc6-mm1 Torsten Kaiser
  1 sibling, 1 reply; 146+ messages in thread
From: Andrew Morton @ 2008-01-06  1:25 UTC (permalink / raw)
  To: Torsten Kaiser
  Cc: Jarek Poplawski, Herbert Xu, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker, FUJITA Tomonori

On Sat, 5 Jan 2008 23:10:17 +0100 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:

> On Jan 5, 2008 3:52 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> > On Jan 5, 2008 11:13 AM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> > > On Sat, Jan 05, 2008 at 09:01:02AM +0100, Torsten Kaiser wrote:
> > > > On Jan 5, 2008 1:07 AM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> > > > > I think it would be easier just to start with this working -rc6 and
> > > > > simply check if we have 'right' suspects, so: git-net.patch and
> > > > > git-nfsd.patch from -mm1-broken-out, as suggested by Herbert (I hope,
> > > > > can compile - otherwise you could try the other way: add the whole -mm
> > > > > and revert these two). Using current gits could complicate this
> > > > > "investigation".
> > > >
> > > > OK, I will try this...
> >
> > still on the todo-list, I had no time to try this yet...
> 
> working on it...
> 2.6.24-rc6 + mm-patches up to git.battery (includes git-net and
> git-netdev-all) worked for 110 packages, then I proclaimed it good.
> 2.6.24-rc6 + mm-patches up to (including) git.nfsd is currently
> getting testet (9 packages done...)
> 
> But the cause of my mail is the following question:
> Regarding my "iommu-sg-merging-patches are new in -rc3-mm and could be
> the cause"-suspicion I looked at these patches and came across these
> hunks:
> 
> This is removed from arch/x86/lib/bitstr_64.c:
> -/* Find string of zero bits in a bitmap */
> -unsigned long
> -find_next_zero_string(unsigned long *bitmap, long start, long nbits, int len)
> -{
> -       unsigned long n, end, i;
> -
> - again:
> -       n = find_next_zero_bit(bitmap, nbits, start);
> -       if (n == -1)
> -               return -1;
> -
> -       /* could test bitsliced, but it's hardly worth it */
> -       end = n+len;
> -       if (end > nbits)
> -               return -1;
> -       for (i = n+1; i < end; i++) {
> -               if (test_bit(i, bitmap)) {
> -                       start = i+1;
> -                       goto again;
> -               }
> -       }
> -       return n;
> -}
> 
> This is added to lib/iommu-helper.c:
> +static unsigned long find_next_zero_area(unsigned long *map,
> +                                        unsigned long size,
> +                                        unsigned long start,
> +                                        unsigned int nr)
> +{
> +       unsigned long index, end, i;
> +again:
> +       index = find_next_zero_bit(map, size, start);
> +       end = index + nr;
> +       if (end > size)
> +               return -1;
> +       for (i = index + 1; i < end; i++) {
> +               if (test_bit(i, map)) {
> +                       start = i+1;
> +                       goto again;
> +               }
> +       }
> +       return index;
> +}
> 
> The old version checks, if find_next_zero_bit returns -1, the new
> version doesn't do this.
> Is this intended and can find_next_zero_bit never fail?
> Hmm... but in the worst case it should only loop forever if I'm
> reading this right (index = -1 => for-loop counts from 0 to nr, if any
> bit is set it will jump to "again:" and if the next call to
> find_next_zero_bit also fails, its an endless loop)

I susect these are doing different things. 
iommu-sg-kill-__clear_bit_string-and-find_next_zero_string.patch says:

  This kills unused __clear_bit_string and find_next_zero_string (they
  were used by only gart and calgary IOMMUs).

iommu-sg-add-iommu-helper-functions-for-the-free-area-management.patch says:

  This adds IOMMU helper functions for the free area management.  These
  functions take care of LLD's segment boundary limit for IOMMUs.  They
  would be useful for IOMMUs that use bitmap for the free area management.

> So even if this can not explain my bug, could somebody check if this
> is a real bug or not?

Let's cc the author of those changes.

Thanks for persisting with this bug.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-05 22:10                                   ` 2.6.24-rc6-mm1 Torsten Kaiser
  2008-01-06  1:25                                     ` 2.6.24-rc6-mm1 Andrew Morton
@ 2008-01-06  3:16                                     ` Torsten Kaiser
  1 sibling, 0 replies; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-06  3:16 UTC (permalink / raw)
  To: Jarek Poplawski
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

On Jan 5, 2008 11:10 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> 2.6.24-rc6 + mm-patches up to git.battery (includes git-net and
> git-netdev-all) worked for 110 packages, then I proclaimed it good.
> 2.6.24-rc6 + mm-patches up to (including) git.nfsd is currently
> getting testet (9 packages done...)
That kernel did also work for all 110 packages.

2.6.24-rc6 + mm-patches up to (including) git.xfs -> crash

[  576.899332] ------------[ cut here ]------------
[  576.903661] kernel BUG at lib/list_debug.c:33!
[  576.903661] invalid opcode: 0000 [1] SMP
[  576.903661] last sysfs file:
/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
[  576.903661] CPU 3
[  576.903661] Modules linked in: radeon drm w83792d ipv6 tuner
tea5767 tda8290 tuner_xc2028 tda9887 tuner_simple mt20xx tea5761
tvaudio msp3400 bttv ir_common compat_ioctl32 videobuf_dma_sg
videobuf_core btcx_risc tveeprom videodev v4l2_common usbhid
v4l1_compat sg hid i2c_nforce2 pata_amd
[  576.903661] Pid: 5559, comm: nfsv4-svc Not tainted 2.6.24-rc6-mm-git.xfs #2
[  576.903661] RIP: 0010:[<ffffffff803c16e4>]  [<ffffffff803c16e4>]
__list_add+0x54/0x60
[  576.903661] RSP: 0018:ffff81007d4e1dc0  EFLAGS: 00010282
[  576.903661] RAX: 0000000000000088 RBX: ffff81007e955800 RCX: fffffffffc6c7900
[  576.903661] RDX: ffff81007d53eef0 RSI: 0000000000000001 RDI: ffffffff80760140
[  576.903661] RBP: ffff81007d4e1dc0 R08: 0000000000000001 R09: 0000000000000000
[  576.903661] R10: ffff810080062008 R11: 0000000000000001 R12: ffff81007ed00900
[  576.903661] R13: ffff81007ed00938 R14: ffff81007ed00938 R15: ffff81007dd6f100
[  576.903661] FS:  00007f1b7e6a36f0(0000) GS:ffff81011ff1b780(0000)
knlGS:0000000000000000
[  576.903661] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  576.903661] CR2: 00007ffb28c2c000 CR3: 00000000741ab000 CR4: 00000000000006e0
[  576.903661] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  576.903661] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  576.903661] Process nfsv4-svc (pid: 5559, threadinfo
ffff81007d4e0000, task ffff81007d53eef0)
[  576.903661] Stack:  ffff81007d4e1e00 ffffffff805c4dbb
ffff81007ed00908 ffff81007dd6f100
[  576.903661]  ffff81011ad7bc00 ffff81007d458000 ffff81007e955800
ffff81007dd6f110
[  576.903661]  ffff81007d4e1e10 ffffffff805c4ea7 ffff81007d4e1ee0
ffffffff805c5fd4
[  576.903661] Call Trace:
[  576.903661]  [<ffffffff805c4dbb>] svc_xprt_enqueue+0x1ab/0x240
[  576.903661]  [<ffffffff805c4ea7>] svc_xprt_received+0x17/0x20
[  576.903661]  [<ffffffff805c5fd4>] svc_recv+0x394/0x7c0
[  576.903661]  [<ffffffff805c53de>] svc_send+0xae/0xd0
[  576.903661]  [<ffffffff80230ab0>] default_wake_function+0x0/0x10
[  576.903661]  [<ffffffff80316499>] nfs_callback_svc+0x79/0x130
[  576.903662]  [<ffffffff80232f8c>] finish_task_switch+0xcc/0xe0
[  576.903662]  [<ffffffff8020c818>] child_rip+0xa/0x12
[  576.903662]  [<ffffffff8020bf2f>] restore_args+0x0/0x30
[  576.903662]  [<ffffffff805b9ecd>] __svc_create_thread+0xdd/0x200
[  576.903662]  [<ffffffff80316420>] nfs_callback_svc+0x0/0x130
[  576.903662]  [<ffffffff8020c80e>] child_rip+0x0/0x12
[  576.903662]
[  576.903662]
[  576.903662] Code: 0f 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 8b 16
48 89 e5 e8
[  576.903662] RIP  [<ffffffff803c16e4>] __list_add+0x54/0x60
[  576.903662]  RSP <ffff81007d4e1dc0>
[  576.903673] ---[ end trace d46de6b99ae8cd5a ]---
[  576.913664] Kernel panic - not syncing: Aiee, killing interrupt handler!

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-06  1:25                                     ` 2.6.24-rc6-mm1 Andrew Morton
@ 2008-01-06  3:28                                       ` FUJITA Tomonori
  2008-01-06 10:41                                         ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 1 reply; 146+ messages in thread
From: FUJITA Tomonori @ 2008-01-06  3:28 UTC (permalink / raw)
  To: akpm
  Cc: just.for.lkml, jarkao2, herbert, linux-kernel, neilb, bfields,
	netdev, tom, tomof, fujita.tomonori

On Sat, 5 Jan 2008 17:25:24 -0800
Andrew Morton <akpm@linux-foundation.org> wrote:

> On Sat, 5 Jan 2008 23:10:17 +0100 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> 
> > On Jan 5, 2008 3:52 PM, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:
> > > On Jan 5, 2008 11:13 AM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> > > > On Sat, Jan 05, 2008 at 09:01:02AM +0100, Torsten Kaiser wrote:
> > > > > On Jan 5, 2008 1:07 AM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> > > > > > I think it would be easier just to start with this working -rc6 and
> > > > > > simply check if we have 'right' suspects, so: git-net.patch and
> > > > > > git-nfsd.patch from -mm1-broken-out, as suggested by Herbert (I hope,
> > > > > > can compile - otherwise you could try the other way: add the whole -mm
> > > > > > and revert these two). Using current gits could complicate this
> > > > > > "investigation".
> > > > >
> > > > > OK, I will try this...
> > >
> > > still on the todo-list, I had no time to try this yet...
> > 
> > working on it...
> > 2.6.24-rc6 + mm-patches up to git.battery (includes git-net and
> > git-netdev-all) worked for 110 packages, then I proclaimed it good.
> > 2.6.24-rc6 + mm-patches up to (including) git.nfsd is currently
> > getting testet (9 packages done...)
> > 
> > But the cause of my mail is the following question:
> > Regarding my "iommu-sg-merging-patches are new in -rc3-mm and could be
> > the cause"-suspicion I looked at these patches and came across these
> > hunks:
> > 
> > This is removed from arch/x86/lib/bitstr_64.c:
> > -/* Find string of zero bits in a bitmap */
> > -unsigned long
> > -find_next_zero_string(unsigned long *bitmap, long start, long nbits, int len)
> > -{
> > -       unsigned long n, end, i;
> > -
> > - again:
> > -       n = find_next_zero_bit(bitmap, nbits, start);
> > -       if (n == -1)
> > -               return -1;
> > -
> > -       /* could test bitsliced, but it's hardly worth it */
> > -       end = n+len;
> > -       if (end > nbits)
> > -               return -1;
> > -       for (i = n+1; i < end; i++) {
> > -               if (test_bit(i, bitmap)) {
> > -                       start = i+1;
> > -                       goto again;
> > -               }
> > -       }
> > -       return n;
> > -}
> > 
> > This is added to lib/iommu-helper.c:
> > +static unsigned long find_next_zero_area(unsigned long *map,
> > +                                        unsigned long size,
> > +                                        unsigned long start,
> > +                                        unsigned int nr)
> > +{
> > +       unsigned long index, end, i;
> > +again:
> > +       index = find_next_zero_bit(map, size, start);
> > +       end = index + nr;
> > +       if (end > size)
> > +               return -1;
> > +       for (i = index + 1; i < end; i++) {
> > +               if (test_bit(i, map)) {
> > +                       start = i+1;
> > +                       goto again;
> > +               }
> > +       }
> > +       return index;
> > +}
> > 
> > The old version checks, if find_next_zero_bit returns -1, the new
> > version doesn't do this.
> > Is this intended and can find_next_zero_bit never fail?
> > Hmm... but in the worst case it should only loop forever if I'm
> > reading this right (index = -1 => for-loop counts from 0 to nr, if any
> > bit is set it will jump to "again:" and if the next call to
> > find_next_zero_bit also fails, its an endless loop)

find_next_zero_bit returns -1?

It seems that x86_64 doesn't. POWER and SPARC64 IOMMUs use
find_next_zero_bit too but both doesn't check if find_next_zero_bit
returns -1. If find_next_zero_bit fails, it returns size. So it
doesn't leads to an endless loop.

But this patch has other bugs that break POWER IOMMUs.

If you use the IOMMUs on POWER, please try the following patch:

http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12702.html

> 
> I susect these are doing different things. 
> iommu-sg-kill-__clear_bit_string-and-find_next_zero_string.patch says:
> 
>   This kills unused __clear_bit_string and find_next_zero_string (they
>   were used by only gart and calgary IOMMUs).
> 
> iommu-sg-add-iommu-helper-functions-for-the-free-area-management.patch says:
> 
>   This adds IOMMU helper functions for the free area management.  These
>   functions take care of LLD's segment boundary limit for IOMMUs.  They
>   would be useful for IOMMUs that use bitmap for the free area management.
> 
> > So even if this can not explain my bug, could somebody check if this
> > is a real bug or not?
> 
> Let's cc the author of those changes.
> 
> Thanks for persisting with this bug.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-05 14:52                                 ` 2.6.24-rc6-mm1 Torsten Kaiser
  2008-01-05 22:10                                   ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-06  8:27                                   ` Jarek Poplawski
  2008-01-06 10:30                                     ` 2.6.24-rc6-mm1 Torsten Kaiser
  1 sibling, 1 reply; 146+ messages in thread
From: Jarek Poplawski @ 2008-01-06  8:27 UTC (permalink / raw)
  To: Torsten Kaiser
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

On Sat, Jan 05, 2008 at 03:52:32PM +0100, Torsten Kaiser wrote:
...
> So my personal conclusion would be, that someone is writing to memory
> that he no longer owns. Most probably 0-bytes. (the complete_routine
> got NULLed and the warning about dst->__refcnt being 0).
> 
> Use-after-free or something else?

I agree: your conclusion seems to be the most probable explanation for
this. Then it could be really hard to solve this without bisection or
something similar. But there is some probabability this something could
try kfree later too, but simply this list debugging triggers earlier.

> > > If you think some other slub_debug might catch it, I would try this...

You can try to add "U" to these other slub_debug options. As a matter
of fact, if your above diagnose is right, it seems you risk to damage
your system or even the box with these tests, so if you want to
continue, you should probably turn any possible debugging on (not in
mm only).

BTW, you've written that some debugging options seem to delay the bug.
Since they often change sizes of some structures than such wrong
writes could have some 'safer' offsets. So, this could really delay
e.g. these list's bugs, but maybe this could also let to stay 'alive'
to such wrong kfree?

Cheers,
Jarek P.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: sparc64: undefined reference to `vmemmap_table'
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (18 preceding siblings ...)
  2007-12-31 20:11 ` 2.6.24-rc6-mm1 (driver core/sysfs) Randy Dunlap
@ 2008-01-06 10:03 ` Mariusz Kozlowski
  2008-01-06 10:15   ` Andrew Morton
  2008-01-07 13:50 ` [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1) Dhaval Giani
  20 siblings, 1 reply; 146+ messages in thread
From: Mariusz Kozlowski @ 2008-01-06 10:03 UTC (permalink / raw)
  To: Andrew Morton, David Miller; +Cc: linux-kernel, sparclinux

Hello,

	This is from allnoconfig on sparc64:

  LD      .tmp_vmlinux1
arch/sparc64/kernel/head.o: In function `kvmap_vmemmap':
(.text+0x34ec): undefined reference to `vmemmap_table'
arch/sparc64/kernel/head.o: In function `kvmap_vmemmap':
(.text+0x34f4): undefined reference to `vmemmap_table'
make: *** [.tmp_vmlinux1] Error 1

Regards,

	Mariusz

Linux sparc64 2.6.23 #2 SMP PREEMPT Fri Dec 21 21:20:01 CET 2007 sparc64 sun4u TI UltraSparc II (BlackBird) GNU/Linux
 
Gnu C                  4.1.2
Gnu make               3.81
binutils               2.18
util-linux             2.12r
mount                  2.12r
module-init-tools      3.4
e2fsprogs              1.40.3
Linux C Library        2.6.1
Dynamic linker (ldd)   2.6.1
Procps                 3.2.7
Net-tools              1.60
Kbd                    1.13
Sh-utils               6.9
udev                   115

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: sparc64: undefined reference to `vmemmap_table'
  2008-01-06 10:03 ` 2.6.24-rc6-mm1: sparc64: undefined reference to `vmemmap_table' Mariusz Kozlowski
@ 2008-01-06 10:15   ` Andrew Morton
  2008-01-07  1:18     ` David Miller
  0 siblings, 1 reply; 146+ messages in thread
From: Andrew Morton @ 2008-01-06 10:15 UTC (permalink / raw)
  To: Mariusz Kozlowski; +Cc: David Miller, linux-kernel, sparclinux

On Sun, 6 Jan 2008 11:03:02 +0100 Mariusz Kozlowski <m.kozlowski@tuxland.pl> wrote:

> 	This is from allnoconfig on sparc64:
> 
>   LD      .tmp_vmlinux1
> arch/sparc64/kernel/head.o: In function `kvmap_vmemmap':
> (.text+0x34ec): undefined reference to `vmemmap_table'
> arch/sparc64/kernel/head.o: In function `kvmap_vmemmap':
> (.text+0x34f4): undefined reference to `vmemmap_table'

Happens in mainline too.  Maybe arch/sparc64/kernel/ktlb.S needs to be
taught about CONFIG_SPARSEMEM_VMEMMAP=n.  

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-06  8:27                                   ` 2.6.24-rc6-mm1 Jarek Poplawski
@ 2008-01-06 10:30                                     ` Torsten Kaiser
  2008-01-06 14:52                                       ` 2.6.24-rc6-mm1 Jarek Poplawski
  0 siblings, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-06 10:30 UTC (permalink / raw)
  To: Jarek Poplawski
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

On Jan 6, 2008 9:27 AM, Jarek Poplawski <jarkao2@gmail.com> wrote:
> On Sat, Jan 05, 2008 at 03:52:32PM +0100, Torsten Kaiser wrote:
> ...
> > So my personal conclusion would be, that someone is writing to memory
> > that he no longer owns. Most probably 0-bytes. (the complete_routine
> > got NULLed and the warning about dst->__refcnt being 0).
> >
> > Use-after-free or something else?
>
> I agree: your conclusion seems to be the most probable explanation for
> this. Then it could be really hard to solve this without bisection or
> something similar. But there is some probabability this something could
> try kfree later too, but simply this list debugging triggers earlier.

As for example in the case when it dies in ieee1394-thread the list is
so corrupted that it will die anyway.

But I might try this anyway, as I don't really have a better idee.

> > > > If you think some other slub_debug might catch it, I would try this...
>
> You can try to add "U" to these other slub_debug options. As a matter
> of fact, if your above diagnose is right, it seems you risk to damage
> your system or even the box with these tests, so if you want to
> continue, you should probably turn any possible debugging on (not in
> mm only).

I did not add U, because I thought that would only needed to trace memory leaks.
And I hoped that using P (poison) would catch any later use (after free).

> BTW, you've written that some debugging options seem to delay the bug.
> Since they often change sizes of some structures than such wrong
> writes could have some 'safer' offsets. So, this could really delay
> e.g. these list's bugs, but maybe this could also let to stay 'alive'
> to such wrong kfree?

I think this bug is highly timing dependent. Its not always the same
package that dies and as this is a SMP system I would guess two CPUs
using the same data will trigger this.
And using the poison-option will definitily slow the system down and
mess up the timings.

What also speaks against the 'safer' offsets is, that after adding my
notfreed-byte to skbuff the bug still triggered in the same way.

I'm currently looking at
http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12702.html
,trying to understand if this is relevant for me on x86_64.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-06  3:28                                       ` 2.6.24-rc6-mm1 FUJITA Tomonori
@ 2008-01-06 10:41                                         ` Torsten Kaiser
  2008-01-06 11:23                                           ` 2.6.24-rc6-mm1 FUJITA Tomonori
  0 siblings, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-06 10:41 UTC (permalink / raw)
  To: FUJITA Tomonori
  Cc: akpm, jarkao2, herbert, linux-kernel, neilb, bfields, netdev,
	tom, fujita.tomonori

On Jan 6, 2008 4:28 AM, FUJITA Tomonori <tomof@acm.org> wrote:
> On Sat, 5 Jan 2008 17:25:24 -0800
> Andrew Morton <akpm@linux-foundation.org> wrote:
> > On Sat, 5 Jan 2008 23:10:17 +0100 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > > But the cause of my mail is the following question:
> > > Regarding my "iommu-sg-merging-patches are new in -rc3-mm and could be
> > > the cause"-suspicion I looked at these patches and came across these
> > > hunks:
> > >
> > > This is removed from arch/x86/lib/bitstr_64.c:
> > > -/* Find string of zero bits in a bitmap */
> > > -unsigned long
> > > -find_next_zero_string(unsigned long *bitmap, long start, long nbits, int len)
> > > -{
> > > -       unsigned long n, end, i;
> > > -
> > > - again:
> > > -       n = find_next_zero_bit(bitmap, nbits, start);
> > > -       if (n == -1)
> > > -               return -1;
> > > -
> > > -       /* could test bitsliced, but it's hardly worth it */
> > > -       end = n+len;
> > > -       if (end > nbits)
> > > -               return -1;
> > > -       for (i = n+1; i < end; i++) {
> > > -               if (test_bit(i, bitmap)) {
> > > -                       start = i+1;
> > > -                       goto again;
> > > -               }
> > > -       }
> > > -       return n;
> > > -}
> > >
> > > This is added to lib/iommu-helper.c:
> > > +static unsigned long find_next_zero_area(unsigned long *map,
> > > +                                        unsigned long size,
> > > +                                        unsigned long start,
> > > +                                        unsigned int nr)
> > > +{
> > > +       unsigned long index, end, i;
> > > +again:
> > > +       index = find_next_zero_bit(map, size, start);
> > > +       end = index + nr;
> > > +       if (end > size)
> > > +               return -1;
> > > +       for (i = index + 1; i < end; i++) {
> > > +               if (test_bit(i, map)) {
> > > +                       start = i+1;
> > > +                       goto again;
> > > +               }
> > > +       }
> > > +       return index;
> > > +}
> > >
> > > The old version checks, if find_next_zero_bit returns -1, the new
> > > version doesn't do this.
> > > Is this intended and can find_next_zero_bit never fail?
> > > Hmm... but in the worst case it should only loop forever if I'm
> > > reading this right (index = -1 => for-loop counts from 0 to nr, if any
> > > bit is set it will jump to "again:" and if the next call to
> > > find_next_zero_bit also fails, its an endless loop)
>
> find_next_zero_bit returns -1?
>
> It seems that x86_64 doesn't.

I'm sorry. I didn't look into find_next_zero_bit, I only noted that
the old version did check for -1 and the new one didn't.
Obviously the old check was superfluous.

> POWER and SPARC64 IOMMUs use
> find_next_zero_bit too but both doesn't check if find_next_zero_bit
> returns -1. If find_next_zero_bit fails, it returns size. So it
> doesn't leads to an endless loop.

Yes, this can't happen. It was a wrong assumption on my part.

> But this patch has other bugs that break POWER IOMMUs.
>
> If you use the IOMMUs on POWER, please try the following patch:

I'm using CONFIG_GART_IOMMU=y on x86_64.

> http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12702.html

I also noted the line "index = (index + align_mask) & ~align_mask;" in
iommu_area_alloc() and didn't understand what this was trying to do
and how this should work, but as arch/x86/kernel/pci-gart_64.c always
uses 0 as align_mask I just ignored it.

I will applie your patch and see if this hunk from
find_next_zero_area() makes a difference:

       end = index + nr;
-       if (end > size)
+       if (end >= size)
                return -1;
-       for (i = index + 1; i < end; i++) {
+       for (i = index; i < end; i++) {
                if (test_bit(i, map)) {

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-06 10:41                                         ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-06 11:23                                           ` FUJITA Tomonori
  2008-01-06 11:35                                             ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 1 reply; 146+ messages in thread
From: FUJITA Tomonori @ 2008-01-06 11:23 UTC (permalink / raw)
  To: just.for.lkml
  Cc: tomof, akpm, jarkao2, herbert, linux-kernel, neilb, bfields,
	netdev, tom, fujita.tomonori, fujita.tomonori

On Sun, 6 Jan 2008 11:41:10 +0100
"Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:

> On Jan 6, 2008 4:28 AM, FUJITA Tomonori <tomof@acm.org> wrote:
> > On Sat, 5 Jan 2008 17:25:24 -0800
> > Andrew Morton <akpm@linux-foundation.org> wrote:
> > > On Sat, 5 Jan 2008 23:10:17 +0100 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > > > But the cause of my mail is the following question:
> > > > Regarding my "iommu-sg-merging-patches are new in -rc3-mm and could be
> > > > the cause"-suspicion I looked at these patches and came across these
> > > > hunks:
> > > >
> > > > This is removed from arch/x86/lib/bitstr_64.c:
> > > > -/* Find string of zero bits in a bitmap */
> > > > -unsigned long
> > > > -find_next_zero_string(unsigned long *bitmap, long start, long nbits, int len)
> > > > -{
> > > > -       unsigned long n, end, i;
> > > > -
> > > > - again:
> > > > -       n = find_next_zero_bit(bitmap, nbits, start);
> > > > -       if (n == -1)
> > > > -               return -1;
> > > > -
> > > > -       /* could test bitsliced, but it's hardly worth it */
> > > > -       end = n+len;
> > > > -       if (end > nbits)
> > > > -               return -1;
> > > > -       for (i = n+1; i < end; i++) {
> > > > -               if (test_bit(i, bitmap)) {
> > > > -                       start = i+1;
> > > > -                       goto again;
> > > > -               }
> > > > -       }
> > > > -       return n;
> > > > -}
> > > >
> > > > This is added to lib/iommu-helper.c:
> > > > +static unsigned long find_next_zero_area(unsigned long *map,
> > > > +                                        unsigned long size,
> > > > +                                        unsigned long start,
> > > > +                                        unsigned int nr)
> > > > +{
> > > > +       unsigned long index, end, i;
> > > > +again:
> > > > +       index = find_next_zero_bit(map, size, start);
> > > > +       end = index + nr;
> > > > +       if (end > size)
> > > > +               return -1;
> > > > +       for (i = index + 1; i < end; i++) {
> > > > +               if (test_bit(i, map)) {
> > > > +                       start = i+1;
> > > > +                       goto again;
> > > > +               }
> > > > +       }
> > > > +       return index;
> > > > +}
> > > >
> > > > The old version checks, if find_next_zero_bit returns -1, the new
> > > > version doesn't do this.
> > > > Is this intended and can find_next_zero_bit never fail?
> > > > Hmm... but in the worst case it should only loop forever if I'm
> > > > reading this right (index = -1 => for-loop counts from 0 to nr, if any
> > > > bit is set it will jump to "again:" and if the next call to
> > > > find_next_zero_bit also fails, its an endless loop)
> >
> > find_next_zero_bit returns -1?
> >
> > It seems that x86_64 doesn't.
> 
> I'm sorry. I didn't look into find_next_zero_bit, I only noted that
> the old version did check for -1 and the new one didn't.
> Obviously the old check was superfluous.
> 
> > POWER and SPARC64 IOMMUs use
> > find_next_zero_bit too but both doesn't check if find_next_zero_bit
> > returns -1. If find_next_zero_bit fails, it returns size. So it
> > doesn't leads to an endless loop.
> 
> Yes, this can't happen. It was a wrong assumption on my part.
> 
> > But this patch has other bugs that break POWER IOMMUs.
> >
> > If you use the IOMMUs on POWER, please try the following patch:
> 
> I'm using CONFIG_GART_IOMMU=y on x86_64.
> 
> > http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12702.html
> 
> I also noted the line "index = (index + align_mask) & ~align_mask;" in
> iommu_area_alloc() and didn't understand what this was trying to do
> and how this should work, but as arch/x86/kernel/pci-gart_64.c always
> uses 0 as align_mask I just ignored it.

Yeah, it's for only POWER IOMMUs. It's meaningless for gart and
calgary IOMMUs.


> I will applie your patch and see if this hunk from
> find_next_zero_area() makes a difference:
> 
>        end = index + nr;
> -       if (end > size)
> +       if (end >= size)
>                 return -1;
> -       for (i = index + 1; i < end; i++) {
> +       for (i = index; i < end; i++) {
>                 if (test_bit(i, map)) {

The patch should not make a difference for X86_64.

Can you try the patch to revert my IOMMU changes?

http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12694.html

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-06 11:23                                           ` 2.6.24-rc6-mm1 FUJITA Tomonori
@ 2008-01-06 11:35                                             ` Torsten Kaiser
  2008-01-06 13:33                                               ` 2.6.24-rc6-mm1 FUJITA Tomonori
  0 siblings, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-06 11:35 UTC (permalink / raw)
  To: FUJITA Tomonori
  Cc: akpm, jarkao2, herbert, linux-kernel, neilb, bfields, netdev,
	tom, fujita.tomonori

On Jan 6, 2008 12:23 PM, FUJITA Tomonori <tomof@acm.org> wrote:
> On Sun, 6 Jan 2008 11:41:10 +0100
> "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > I will applie your patch and see if this hunk from
> > find_next_zero_area() makes a difference:
> >
> >        end = index + nr;
> > -       if (end > size)
> > +       if (end >= size)
> >                 return -1;
> > -       for (i = index + 1; i < end; i++) {
> > +       for (i = index; i < end; i++) {
> >                 if (test_bit(i, map)) {
>
> The patch should not make a difference for X86_64.

Hmm...
arch/x86/kernel/pci-gart_64.c:
alloc_iommu() calls iommu_area_alloc()
lib/iommu-helper.c:
iommu_area_alloc() calls find_next_zero_area()
-> so the above code should be called even on X86_64

And the change in the for loop means that 'index' will now be tested,
but with the old code it was not.

And double using something does fit with the errors I'm seeing...

> Can you try the patch to revert my IOMMU changes?
>
> http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12694.html

Testing for this bug is a little bit slow, as I'm compiling ~100
packages trying to trigger it.
If my current testrun with the patch from
http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12702.html
crashes, I will revert the hole IOMMU changes with above patch and try again.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-06 11:35                                             ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-06 13:33                                               ` FUJITA Tomonori
  2008-01-06 20:03                                                 ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 1 reply; 146+ messages in thread
From: FUJITA Tomonori @ 2008-01-06 13:33 UTC (permalink / raw)
  To: just.for.lkml
  Cc: tomof, akpm, jarkao2, herbert, linux-kernel, neilb, bfields,
	netdev, tom, fujita.tomonori, fujita.tomonori

On Sun, 6 Jan 2008 12:35:35 +0100
"Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:

> On Jan 6, 2008 12:23 PM, FUJITA Tomonori <tomof@acm.org> wrote:
> > On Sun, 6 Jan 2008 11:41:10 +0100
> > "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > > I will applie your patch and see if this hunk from
> > > find_next_zero_area() makes a difference:
> > >
> > >        end = index + nr;
> > > -       if (end > size)
> > > +       if (end >= size)
> > >                 return -1;
> > > -       for (i = index + 1; i < end; i++) {
> > > +       for (i = index; i < end; i++) {
> > >                 if (test_bit(i, map)) {
> >
> > The patch should not make a difference for X86_64.
> 
> Hmm...
> arch/x86/kernel/pci-gart_64.c:
> alloc_iommu() calls iommu_area_alloc()
> lib/iommu-helper.c:
> iommu_area_alloc() calls find_next_zero_area()
> -> so the above code should be called even on X86_64

Oops, I meant that the patch fixes the align allocation (non zero
align_mask case). X86_64 doesn't use the align allocation.


> And the change in the for loop means that 'index' will now be tested,
> but with the old code it was not.

With the old code, 'index' is tested by find_next_zero_bit.

With the new code and non zero align_mask case, 'index' is not tested
by find_next_zero_bit. So test_bit needs to start with 'index'.

So If I understand the correctly, this patch should not make a
difference for x86_64 though I might miss something.


> And double using something does fit with the errors I'm seeing...
> 
> > Can you try the patch to revert my IOMMU changes?
> >
> > http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12694.html
> 
> Testing for this bug is a little bit slow, as I'm compiling ~100
> packages trying to trigger it.
> If my current testrun with the patch from
> http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12702.html
> crashes, I will revert the hole IOMMU changes with above patch and try again.

Thanks for testing,

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-06 10:30                                     ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-06 14:52                                       ` Jarek Poplawski
  0 siblings, 0 replies; 146+ messages in thread
From: Jarek Poplawski @ 2008-01-06 14:52 UTC (permalink / raw)
  To: Torsten Kaiser
  Cc: Herbert Xu, Andrew Morton, linux-kernel, Neil Brown,
	J. Bruce Fields, netdev, Tom Tucker

On Sun, Jan 06, 2008 at 11:30:48AM +0100, Torsten Kaiser wrote:
...
> I think this bug is highly timing dependent. Its not always the same
> package that dies and as this is a SMP system I would guess two CPUs
> using the same data will trigger this.
> And using the poison-option will definitily slow the system down and
> mess up the timings.

Of course it looks like using the same data, but it seems there is no
reason to think it needs the same time: e.g. some timer or workqueue
could retrigger after it's supposed to be killed. Any additional
debugging/poisonning might help to see it earlier, so this should be
safer for your system, but, most probably this would show data from
the damaged side, so not necessarily very helpful.

> What also speaks against the 'safer' offsets is, that after adding my
> notfreed-byte to skbuff the bug still triggered in the same way.

We are not even sure skbuffs were directly affected by this or they
were incorrectly freed because of other structures beeing damaged?

IMHO, e.g. starting your system with limited memory should cause
faster memory reclaiming, and thus more often triggering of these bugs,
but of course I can be wrong.

Jarek P.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-06 13:33                                               ` 2.6.24-rc6-mm1 FUJITA Tomonori
@ 2008-01-06 20:03                                                 ` Torsten Kaiser
  2008-01-07  6:16                                                   ` 2.6.24-rc6-mm1 FUJITA Tomonori
  0 siblings, 1 reply; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-06 20:03 UTC (permalink / raw)
  To: FUJITA Tomonori
  Cc: akpm, jarkao2, herbert, linux-kernel, neilb, bfields, netdev,
	tom, fujita.tomonori

On Jan 6, 2008 2:33 PM, FUJITA Tomonori <tomof@acm.org> wrote:
> On Sun, 6 Jan 2008 12:35:35 +0100
> "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > On Jan 6, 2008 12:23 PM, FUJITA Tomonori <tomof@acm.org> wrote:
> > > On Sun, 6 Jan 2008 11:41:10 +0100
> > > "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > > > I will applie your patch and see if this hunk from
> > > > find_next_zero_area() makes a difference:
> > > >
> > > >        end = index + nr;
> > > > -       if (end > size)
> > > > +       if (end >= size)
> > > >                 return -1;

-> that might still have made a difference, but ...

> > > > -       for (i = index + 1; i < end; i++) {
> > > > +       for (i = index; i < end; i++) {

... as you say below, the test for the index position is only needed
if index is modified after find_next_zero_bit().

> > > >                 if (test_bit(i, map)) {
> > >
> > > The patch should not make a difference for X86_64.
> >
> > Hmm...
> > arch/x86/kernel/pci-gart_64.c:
> > alloc_iommu() calls iommu_area_alloc()
> > lib/iommu-helper.c:
> > iommu_area_alloc() calls find_next_zero_area()
> > -> so the above code should be called even on X86_64
>
> Oops, I meant that the patch fixes the align allocation (non zero
> align_mask case). X86_64 doesn't use the align allocation.
>
>
> > And the change in the for loop means that 'index' will now be tested,
> > but with the old code it was not.
>
> With the old code, 'index' is tested by find_next_zero_bit.
>
> With the new code and non zero align_mask case, 'index' is not tested
> by find_next_zero_bit. So test_bit needs to start with 'index'.
>
> So If I understand the correctly, this patch should not make a
> difference for x86_64 though I might miss something.

You did not miss anything.
After 18 packages my system crashed again.

> > And double using something does fit with the errors I'm seeing...
> >
> > > Can you try the patch to revert my IOMMU changes?
> > >
> > > http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12694.html
> >
> > Testing for this bug is a little bit slow, as I'm compiling ~100
> > packages trying to trigger it.
> > If my current testrun with the patch from
> > http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12702.html
> > crashes, I will revert the hole IOMMU changes with above patch and try again.
>
> Thanks for testing,

OK, I'm still testing this, but after 95 completed packages I'm rather
certain that reverting the IOMMU changes with this patch fixes my
problem.
I didn't have time to look more into this, so I can't offer any
concrete ideas where the bug is.

If you send more patches, I'm willing to test them, but it might take
some more time during the next week.

Thanks for looking into this.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1: sparc64: undefined reference to `vmemmap_table'
  2008-01-06 10:15   ` Andrew Morton
@ 2008-01-07  1:18     ` David Miller
  0 siblings, 0 replies; 146+ messages in thread
From: David Miller @ 2008-01-07  1:18 UTC (permalink / raw)
  To: akpm; +Cc: m.kozlowski, linux-kernel, sparclinux

From: Andrew Morton <akpm@linux-foundation.org>
Date: Sun, 6 Jan 2008 02:15:54 -0800

> On Sun, 6 Jan 2008 11:03:02 +0100 Mariusz Kozlowski <m.kozlowski@tuxland.pl> wrote:
> 
> > 	This is from allnoconfig on sparc64:
> > 
> >   LD      .tmp_vmlinux1
> > arch/sparc64/kernel/head.o: In function `kvmap_vmemmap':
> > (.text+0x34ec): undefined reference to `vmemmap_table'
> > arch/sparc64/kernel/head.o: In function `kvmap_vmemmap':
> > (.text+0x34f4): undefined reference to `vmemmap_table'
> 
> Happens in mainline too.  Maybe arch/sparc64/kernel/ktlb.S needs to be
> taught about CONFIG_SPARSEMEM_VMEMMAP=n.  

It's pointless to support this thing being off.  If possible
I'd like a method to force it always to be enabled and I'll
look into doing that.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-06 20:03                                                 ` 2.6.24-rc6-mm1 Torsten Kaiser
@ 2008-01-07  6:16                                                   ` FUJITA Tomonori
  2008-01-08 15:59                                                     ` 2.6.24-rc6-mm1 Ingo Molnar
  2008-01-25 21:06                                                     ` 2.6.24-rc6-mm1 Torsten Kaiser
  0 siblings, 2 replies; 146+ messages in thread
From: FUJITA Tomonori @ 2008-01-07  6:16 UTC (permalink / raw)
  To: just.for.lkml
  Cc: tomof, akpm, jarkao2, herbert, linux-kernel, neilb, bfields,
	netdev, tom, fujita.tomonori

On Sun, 6 Jan 2008 21:03:42 +0100
"Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:

> On Jan 6, 2008 2:33 PM, FUJITA Tomonori <tomof@acm.org> wrote:
> > On Sun, 6 Jan 2008 12:35:35 +0100
> > "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > > On Jan 6, 2008 12:23 PM, FUJITA Tomonori <tomof@acm.org> wrote:
> > > > On Sun, 6 Jan 2008 11:41:10 +0100
> > > > "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > > > > I will applie your patch and see if this hunk from
> > > > > find_next_zero_area() makes a difference:
> > > > >
> > > > >        end = index + nr;
> > > > > -       if (end > size)
> > > > > +       if (end >= size)
> > > > >                 return -1;
> 
> -> that might still have made a difference, but ...
> 
> > > > > -       for (i = index + 1; i < end; i++) {
> > > > > +       for (i = index; i < end; i++) {
> 
> ... as you say below, the test for the index position is only needed
> if index is modified after find_next_zero_bit().
> 
> > > > >                 if (test_bit(i, map)) {
> > > >
> > > > The patch should not make a difference for X86_64.
> > >
> > > Hmm...
> > > arch/x86/kernel/pci-gart_64.c:
> > > alloc_iommu() calls iommu_area_alloc()
> > > lib/iommu-helper.c:
> > > iommu_area_alloc() calls find_next_zero_area()
> > > -> so the above code should be called even on X86_64
> >
> > Oops, I meant that the patch fixes the align allocation (non zero
> > align_mask case). X86_64 doesn't use the align allocation.
> >
> >
> > > And the change in the for loop means that 'index' will now be tested,
> > > but with the old code it was not.
> >
> > With the old code, 'index' is tested by find_next_zero_bit.
> >
> > With the new code and non zero align_mask case, 'index' is not tested
> > by find_next_zero_bit. So test_bit needs to start with 'index'.
> >
> > So If I understand the correctly, this patch should not make a
> > difference for x86_64 though I might miss something.
> 
> You did not miss anything.
> After 18 packages my system crashed again.
> 
> > > And double using something does fit with the errors I'm seeing...
> > >
> > > > Can you try the patch to revert my IOMMU changes?
> > > >
> > > > http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12694.html
> > >
> > > Testing for this bug is a little bit slow, as I'm compiling ~100
> > > packages trying to trigger it.
> > > If my current testrun with the patch from
> > > http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12702.html
> > > crashes, I will revert the hole IOMMU changes with above patch and try again.
> >
> > Thanks for testing,
> 
> OK, I'm still testing this, but after 95 completed packages I'm rather
> certain that reverting the IOMMU changes with this patch fixes my
> problem.
> I didn't have time to look more into this, so I can't offer any
> concrete ideas where the bug is.
> 
> If you send more patches, I'm willing to test them, but it might take
> some more time during the next week.

Can you try 2.6.24-rc7 + the IOMMU changes?

The patches are available at:

http://www.kernel.org/pub/linux/kernel/people/tomo/iommu/

Or if you prefer the git tree:

git://git.kernel.org/pub/scm/linux/kernel/git/tomo/linux-2.6-misc.git iommu-sg-fixes



I've looked at the changes to GART but they are straightforward and
don't look wrong...


Thanks,

^ permalink raw reply	[flat|nested] 146+ messages in thread

* [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1)
  2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
                   ` (19 preceding siblings ...)
  2008-01-06 10:03 ` 2.6.24-rc6-mm1: sparc64: undefined reference to `vmemmap_table' Mariusz Kozlowski
@ 2008-01-07 13:50 ` Dhaval Giani
  2008-01-07 13:53   ` Thomas Gleixner
  20 siblings, 1 reply; 146+ messages in thread
From: Dhaval Giani @ 2008-01-07 13:50 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, Ingo Molnar, hpa, tglx

Hi Andrew, Ingo, Thomas, Peter,

x86: revert i386: handle an initrd in highmem

The patch caused a failure while booting a kexec kernel.
(http://lkml.org/lkml/2008/1/7/42 has the bisect details.)

The following patch reverts it.

Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/boot/header.S     |    5 -
 arch/x86/kernel/setup_32.c |  113 +++++++--------------------------------------
 2 files changed, 19 insertions(+), 99 deletions(-)

Index: linux-2.6.24-rc6/arch/x86/boot/header.S
===================================================================
--- linux-2.6.24-rc6.orig/arch/x86/boot/header.S
+++ linux-2.6.24-rc6/arch/x86/boot/header.S
@@ -195,13 +195,10 @@ cmd_line_ptr:	.long	0		# (Header version
 					# can be located anywhere in
 					# low memory 0x10000 or higher.
 
-ramdisk_max:	.long 0x7fffffff
+ramdisk_max:	.long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
 					# (Header version 0x0203 or later)
 					# The highest safe address for
 					# the contents of an initrd
-					# The current kernel allows up to 4 GB,
-					# but leave it at 2 GB to avoid
-					# possible bootloader bugs.
 
 kernel_alignment:  .long CONFIG_PHYSICAL_ALIGN	#physical addr alignment
 						#required for protected mode
Index: linux-2.6.24-rc6/arch/x86/kernel/setup_32.c
===================================================================
--- linux-2.6.24-rc6.orig/arch/x86/kernel/setup_32.c
+++ linux-2.6.24-rc6/arch/x86/kernel/setup_32.c
@@ -583,95 +583,6 @@ static void __init relocate_initrd(void)
 
 #endif /* CONFIG_BLK_DEV_INITRD */
 
-#ifdef CONFIG_BLK_DEV_INITRD
-
-static bool do_relocate_initrd = false;
-
-static void __init reserve_initrd(void)
-{
-	unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
-	unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
-	unsigned long ramdisk_end   = ramdisk_image + ramdisk_size;
-	unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT;
-	unsigned long ramdisk_here;
-
-	if (ramdisk_end < ramdisk_image) {
-		printk(KERN_ERR "initrd wraps around end of memory\n"
-		       KERN_ERR "disabling initrd\n");
-		initrd_start = 0;
-		return;
-	}
-	if (ramdisk_size >= end_of_lowmem/2) {
-		printk(KERN_ERR "initrd too large to handle\n"
-		       KERN_ERR "disabling initrd\n");
-		initrd_start = 0;
-		return;
-	}
-	if (ramdisk_end <= end_of_lowmem) {
-		/* All in lowmem, easy case */
-		reserve_bootmem(ramdisk_image, ramdisk_size);
-		initrd_start = ramdisk_image + PAGE_OFFSET;
-		initrd_end = initrd_start+ramdisk_size;
-		return;
-	}
-
-	/* We need to move the initrd down into lowmem */
-	ramdisk_here = (end_of_lowmem - ramdisk_size) & PAGE_MASK;
-
-	/* Note: this includes all the lowmem currently occupied by
-	   the initrd, we rely on that fact to keep the data intact. */
-	reserve_bootmem(ramdisk_here, ramdisk_size);
-	initrd_start = ramdisk_here + PAGE_OFFSET;
-	initrd_end   = initrd_start + ramdisk_size;
-
-	do_relocate_initrd = true;
-}
-
-#define MAX_MAP_CHUNK	(NR_FIX_BTMAPS << PAGE_SHIFT)
-
-static void __init relocate_initrd(void)
-{
-	unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
-	unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
-	unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT;
-	unsigned long ramdisk_here;
-	unsigned long slop, clen, mapaddr;
-	char *p, *q;
-
-	if (!do_relocate_initrd)
-		return;		/* Nothing to do here... */
-
-	ramdisk_here = initrd_start - PAGE_OFFSET;
-	q = (char *)initrd_start;
-
-	/* Copy any lowmem portion of the initrd */
-	if (ramdisk_image < end_of_lowmem) {
-		clen = end_of_lowmem - ramdisk_image;
-		p = (char *)__va(ramdisk_image);
-		memcpy(q, p, clen);
-		q += clen;
-		ramdisk_image += clen;
-		ramdisk_size  -= clen;
-	}
-
-	/* Copy the highmem portion of the initrd */
-	while (ramdisk_size) {
-		slop = ramdisk_image & ~PAGE_MASK;
-		clen = ramdisk_size;
-		if (clen > MAX_MAP_CHUNK-slop)
-			clen = MAX_MAP_CHUNK-slop;
-		mapaddr = ramdisk_image & PAGE_MASK;
-		p = bt_ioremap(mapaddr, clen+slop);
-		memcpy(q, p+slop, clen);
-		bt_iounmap(p, clen+slop);
-		q += clen;
-		ramdisk_image += clen;
-		ramdisk_size  -= clen;
-	}
-}
-
-#endif /* CONFIG_BLK_DEV_INITRD */
-
 void __init setup_bootmem_allocator(void)
 {
 	unsigned long bootmap_size;
@@ -730,8 +641,24 @@ void __init setup_bootmem_allocator(void
 #endif
 	numa_kva_reserve();
 #ifdef CONFIG_BLK_DEV_INITRD
-	if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image)
-		reserve_initrd();
+	if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
+		unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
+		unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
+		unsigned long ramdisk_end   = ramdisk_image + ramdisk_size;
+		unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+
+		if (ramdisk_end <= end_of_lowmem) {
+			reserve_bootmem(ramdisk_image, ramdisk_size,
+							BOOTMEM_DEFAULT);
+			initrd_start = ramdisk_image + PAGE_OFFSET;
+			initrd_end = initrd_start+ramdisk_size;
+		} else {
+			printk(KERN_ERR "initrd extends beyond end of memory "
+			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+			       ramdisk_end, end_of_lowmem);
+			initrd_start = 0;
+		}
+	}
 #endif
 	reserve_crashkernel();
 }
@@ -890,10 +817,6 @@ void __init setup_arch(char **cmdline_p)
 	relocate_initrd();
 #endif
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	relocate_initrd();
-#endif
-
 	dmi_scan_machine();
 
 	io_delay_init();

--
regards
Dhaval

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1)
  2008-01-07 13:50 ` [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1) Dhaval Giani
@ 2008-01-07 13:53   ` Thomas Gleixner
  2008-01-07 14:56     ` Ingo Molnar
  0 siblings, 1 reply; 146+ messages in thread
From: Thomas Gleixner @ 2008-01-07 13:53 UTC (permalink / raw)
  To: Dhaval Giani; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, hpa

On Mon, 7 Jan 2008, Dhaval Giani wrote:

> Hi Andrew, Ingo, Thomas, Peter,
> 
> x86: revert i386: handle an initrd in highmem
> 
> The patch caused a failure while booting a kexec kernel.
> (http://lkml.org/lkml/2008/1/7/42 has the bisect details.)
> 
> The following patch reverts it.
> 
> Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>

Thanks for tracking this down. I'll pull the patch from the x86 git
tree as well.

     tglx

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1)
  2008-01-07 13:53   ` Thomas Gleixner
@ 2008-01-07 14:56     ` Ingo Molnar
  2008-01-07 15:19       ` Dhaval Giani
  2008-01-07 16:22       ` Randy Dunlap
  0 siblings, 2 replies; 146+ messages in thread
From: Ingo Molnar @ 2008-01-07 14:56 UTC (permalink / raw)
  To: Thomas Gleixner; +Cc: Dhaval Giani, Andrew Morton, linux-kernel, hpa


* Thomas Gleixner <tglx@linutronix.de> wrote:

> On Mon, 7 Jan 2008, Dhaval Giani wrote:
> 
> > Hi Andrew, Ingo, Thomas, Peter,
> > 
> > x86: revert i386: handle an initrd in highmem
> > 
> > The patch caused a failure while booting a kexec kernel.
> > (http://lkml.org/lkml/2008/1/7/42 has the bisect details.)
> > 
> > The following patch reverts it.
> > 
> > Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
> 
> Thanks for tracking this down. I'll pull the patch from the x86 git 
> tree as well.

Dhaval, how about the other problem you had - do you have any guess 
what it might be related to?

i'm also wondering - what would be the easiest way to integrate kexec 
into an automated test environment. If i have a bzImage kernel, is kexec 
still supposed to work? Could i for example do a reboot into a new 
(kexec-enabled) kernel via kexec in essence?

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1)
  2008-01-07 14:56     ` Ingo Molnar
@ 2008-01-07 15:19       ` Dhaval Giani
  2008-01-07 16:22       ` Randy Dunlap
  1 sibling, 0 replies; 146+ messages in thread
From: Dhaval Giani @ 2008-01-07 15:19 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Thomas Gleixner, Andrew Morton, linux-kernel, hpa, Srivatsa Vaddagiri

On Mon, Jan 07, 2008 at 03:56:09PM +0100, Ingo Molnar wrote:
> 
> * Thomas Gleixner <tglx@linutronix.de> wrote:
> 
> > On Mon, 7 Jan 2008, Dhaval Giani wrote:
> > 
> > > Hi Andrew, Ingo, Thomas, Peter,
> > > 
> > > x86: revert i386: handle an initrd in highmem
> > > 
> > > The patch caused a failure while booting a kexec kernel.
> > > (http://lkml.org/lkml/2008/1/7/42 has the bisect details.)
> > > 
> > > The following patch reverts it.
> > > 
> > > Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
> > 
> > Thanks for tracking this down. I'll pull the patch from the x86 git 
> > tree as well.
> 
> Dhaval, how about the other problem you had - do you have any guess 
> what it might be related to?
> 

other problem? The load_balance_monitor one? (We are still looking into
that one, just seems that se (as usual :) ) is turning out to be null).

> i'm also wondering - what would be the easiest way to integrate kexec 
> into an automated test environment. If i have a bzImage kernel, is kexec 
> still supposed to work? Could i for example do a reboot into a new 
> (kexec-enabled) kernel via kexec in essence?
> 

Yes, I use a bzImage kernel to reboot using kexec. I use a script which
just sets it up for me. (I can send it to you separately).

-- 
regards,
Dhaval

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1)
  2008-01-07 14:56     ` Ingo Molnar
  2008-01-07 15:19       ` Dhaval Giani
@ 2008-01-07 16:22       ` Randy Dunlap
  2008-01-07 16:32         ` Dhaval Giani
  2008-01-07 16:50         ` Thomas Gleixner
  1 sibling, 2 replies; 146+ messages in thread
From: Randy Dunlap @ 2008-01-07 16:22 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Thomas Gleixner, Dhaval Giani, Andrew Morton, linux-kernel, hpa

On Mon, 7 Jan 2008 15:56:09 +0100 Ingo Molnar wrote:

> 
> * Thomas Gleixner <tglx@linutronix.de> wrote:
> 
> > On Mon, 7 Jan 2008, Dhaval Giani wrote:
> > 
> > > Hi Andrew, Ingo, Thomas, Peter,
> > > 
> > > x86: revert i386: handle an initrd in highmem
> > > 
> > > The patch caused a failure while booting a kexec kernel.
> > > (http://lkml.org/lkml/2008/1/7/42 has the bisect details.)
> > > 
> > > The following patch reverts it.
> > > 
> > > Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
> > 
> > Thanks for tracking this down. I'll pull the patch from the x86 git 
> > tree as well.
> 
> Dhaval, how about the other problem you had - do you have any guess 
> what it might be related to?
> 
> i'm also wondering - what would be the easiest way to integrate kexec 
> into an automated test environment. If i have a bzImage kernel, is kexec 
> still supposed to work? Could i for example do a reboot into a new 
> (kexec-enabled) kernel via kexec in essence?

My daily/nightly kernel test runs use kexec to boot the test kernel.
Well, did thru 2.6.24-rc6-git9, but they fail after that.
Hopefully this patch fixes things.


---
~Randy

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1)
  2008-01-07 16:22       ` Randy Dunlap
@ 2008-01-07 16:32         ` Dhaval Giani
  2008-01-07 16:50         ` Thomas Gleixner
  1 sibling, 0 replies; 146+ messages in thread
From: Dhaval Giani @ 2008-01-07 16:32 UTC (permalink / raw)
  To: Randy Dunlap
  Cc: Ingo Molnar, Thomas Gleixner, Andrew Morton, linux-kernel, hpa

On Mon, Jan 07, 2008 at 08:22:37AM -0800, Randy Dunlap wrote:
> On Mon, 7 Jan 2008 15:56:09 +0100 Ingo Molnar wrote:
> 
> > 
> > * Thomas Gleixner <tglx@linutronix.de> wrote:
> > 
> > > On Mon, 7 Jan 2008, Dhaval Giani wrote:
> > > 
> > > > Hi Andrew, Ingo, Thomas, Peter,
> > > > 
> > > > x86: revert i386: handle an initrd in highmem
> > > > 
> > > > The patch caused a failure while booting a kexec kernel.
> > > > (http://lkml.org/lkml/2008/1/7/42 has the bisect details.)
> > > > 
> > > > The following patch reverts it.
> > > > 
> > > > Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
> > > 
> > > Thanks for tracking this down. I'll pull the patch from the x86 git 
> > > tree as well.
> > 
> > Dhaval, how about the other problem you had - do you have any guess 
> > what it might be related to?
> > 
> > i'm also wondering - what would be the easiest way to integrate kexec 
> > into an automated test environment. If i have a bzImage kernel, is kexec 
> > still supposed to work? Could i for example do a reboot into a new 
> > (kexec-enabled) kernel via kexec in essence?
> 
> My daily/nightly kernel test runs use kexec to boot the test kernel.
> Well, did thru 2.6.24-rc6-git9, but they fail after that.
> Hopefully this patch fixes things.
> 

hmmm. I don't think so. This revert is from the x86 git tree (-mm) (I think
targetted for 2.6.25). Probably a bisect might help there.

-- 
regards,
Dhaval

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1)
  2008-01-07 16:22       ` Randy Dunlap
  2008-01-07 16:32         ` Dhaval Giani
@ 2008-01-07 16:50         ` Thomas Gleixner
  2008-01-07 22:15           ` Randy Dunlap
  1 sibling, 1 reply; 146+ messages in thread
From: Thomas Gleixner @ 2008-01-07 16:50 UTC (permalink / raw)
  To: Randy Dunlap; +Cc: Ingo Molnar, Dhaval Giani, Andrew Morton, linux-kernel, hpa

On Mon, 7 Jan 2008, Randy Dunlap wrote:
> On Mon, 7 Jan 2008 15:56:09 +0100 Ingo Molnar wrote:
> > i'm also wondering - what would be the easiest way to integrate kexec 
> > into an automated test environment. If i have a bzImage kernel, is kexec 
> > still supposed to work? Could i for example do a reboot into a new 
> > (kexec-enabled) kernel via kexec in essence?
> 
> My daily/nightly kernel test runs use kexec to boot the test kernel.
> Well, did thru 2.6.24-rc6-git9, but they fail after that.
> Hopefully this patch fixes things.

The patch in question is not in mainline, it's in the mm branch of
x86.git. So the problem in mainline is a different one. Could you
bisect it please ?

Thanks,

	tglx

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1)
  2008-01-07 16:50         ` Thomas Gleixner
@ 2008-01-07 22:15           ` Randy Dunlap
  0 siblings, 0 replies; 146+ messages in thread
From: Randy Dunlap @ 2008-01-07 22:15 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Ingo Molnar, Dhaval Giani, Andrew Morton, linux-kernel, hpa

On Mon, 7 Jan 2008 17:50:49 +0100 (CET) Thomas Gleixner wrote:

> On Mon, 7 Jan 2008, Randy Dunlap wrote:
> > On Mon, 7 Jan 2008 15:56:09 +0100 Ingo Molnar wrote:
> > > i'm also wondering - what would be the easiest way to integrate kexec 
> > > into an automated test environment. If i have a bzImage kernel, is kexec 
> > > still supposed to work? Could i for example do a reboot into a new 
> > > (kexec-enabled) kernel via kexec in essence?
> > 
> > My daily/nightly kernel test runs use kexec to boot the test kernel.
> > Well, did thru 2.6.24-rc6-git9, but they fail after that.
> > Hopefully this patch fixes things.
> 
> The patch in question is not in mainline, it's in the mm branch of
> x86.git. So the problem in mainline is a different one. Could you
> bisect it please ?

Ugh.  As happens during demos, this (kexec failure) won't happen for me
when I want it to.  I'll keep an eye out for it...


---
~Randy

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-07  6:16                                                   ` 2.6.24-rc6-mm1 FUJITA Tomonori
@ 2008-01-08 15:59                                                     ` Ingo Molnar
  2008-01-08 23:57                                                       ` 2.6.24-rc6-mm1 FUJITA Tomonori
  2008-01-25 21:06                                                     ` 2.6.24-rc6-mm1 Torsten Kaiser
  1 sibling, 1 reply; 146+ messages in thread
From: Ingo Molnar @ 2008-01-08 15:59 UTC (permalink / raw)
  To: FUJITA Tomonori
  Cc: just.for.lkml, tomof, akpm, jarkao2, herbert, linux-kernel,
	neilb, bfields, netdev, tom


* FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> wrote:

> The patches are available at:
> 
> http://www.kernel.org/pub/linux/kernel/people/tomo/iommu/
> 
> Or if you prefer the git tree:
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/tomo/linux-2.6-misc.git 
> iommu-sg-fixes

btw., these improvements to the IOMMU code are in -mm and will go into 
v2.6.25, right? The changes look robust to me.

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-08 15:59                                                     ` 2.6.24-rc6-mm1 Ingo Molnar
@ 2008-01-08 23:57                                                       ` FUJITA Tomonori
  2008-01-09  0:27                                                         ` 2.6.24-rc6-mm1 Andrew Morton
  2008-01-09  9:04                                                         ` 2.6.24-rc6-mm1 Jarek Poplawski
  0 siblings, 2 replies; 146+ messages in thread
From: FUJITA Tomonori @ 2008-01-08 23:57 UTC (permalink / raw)
  To: mingo, akpm
  Cc: fujita.tomonori, just.for.lkml, tomof, jarkao2, herbert,
	linux-kernel, neilb, bfields, netdev, tom

On Tue, 8 Jan 2008 16:59:48 +0100
Ingo Molnar <mingo@elte.hu> wrote:

> 
> * FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> wrote:
> 
> > The patches are available at:
> > 
> > http://www.kernel.org/pub/linux/kernel/people/tomo/iommu/
> > 
> > Or if you prefer the git tree:
> > 
> > git://git.kernel.org/pub/scm/linux/kernel/git/tomo/linux-2.6-misc.git 
> > iommu-sg-fixes
> 
> btw., these improvements to the IOMMU code are in -mm and will go into 
> v2.6.25, right? The changes look robust to me.

Thanks, they have been in -mm though the iommu helper fix hasn't
yet. Balbir Singh found the bug in 2.6.24-rc6-mm1. I've just check
mmotm and found that the IOMMU helper patch doesn't include the fix.

Andrew, can you replace

iommu-sg-add-iommu-helper-functions-for-the-free-area-management.patch

with the updated patch:

http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048997.html

For your convenience I've attached the updated patch too.

Hopefully, they will go into v2.6.25. At least, I hope that the
patches (0001-0011) that make the IOMMUs respect segment size limits
when merging sg lists will be merged. They are simple and I got ACKs
on POWER and PARISC.


Thanks,

=
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Subject: [PATCH] add IOMMU helper functions for the free area management

This adds IOMMU helper functions for the free area management.  These
functions take care of LLD's segment boundary limit for IOMMUs.  They would be
useful for IOMMUs that use bitmap for the free area management.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
 include/linux/iommu-helper.h |    7 ++++
 lib/Makefile                 |    1 +
 lib/iommu-helper.c           |   80 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 88 insertions(+), 0 deletions(-)
 create mode 100644 include/linux/iommu-helper.h
 create mode 100644 lib/iommu-helper.c

diff --git a/include/linux/iommu-helper.h b/include/linux/iommu-helper.h
new file mode 100644
index 0000000..4dd4c04
--- /dev/null
+++ b/include/linux/iommu-helper.h
@@ -0,0 +1,7 @@
+extern unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
+				      unsigned long start, unsigned int nr,
+				      unsigned long shift,
+				      unsigned long boundary_size,
+				      unsigned long align_mask);
+extern void iommu_area_free(unsigned long *map, unsigned long start,
+			    unsigned int nr);
diff --git a/lib/Makefile b/lib/Makefile
index b6793ed..0e7383f 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_SMP) += percpu_counter.o
 obj-$(CONFIG_AUDIT_GENERIC) += audit.o
 
 obj-$(CONFIG_SWIOTLB) += swiotlb.o
+obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o
 obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o
 
 lib-$(CONFIG_GENERIC_BUG) += bug.o
diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c
new file mode 100644
index 0000000..495575a
--- /dev/null
+++ b/lib/iommu-helper.c
@@ -0,0 +1,80 @@
+/*
+ * IOMMU helper functions for the free area management
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+
+static unsigned long find_next_zero_area(unsigned long *map,
+					 unsigned long size,
+					 unsigned long start,
+					 unsigned int nr,
+					 unsigned long align_mask)
+{
+	unsigned long index, end, i;
+again:
+	index = find_next_zero_bit(map, size, start);
+
+	/* Align allocation */
+	index = (index + align_mask) & ~align_mask;
+
+	end = index + nr;
+	if (end >= size)
+		return -1;
+	for (i = index; i < end; i++) {
+		if (test_bit(i, map)) {
+			start = i+1;
+			goto again;
+		}
+	}
+	return index;
+}
+
+static inline void set_bit_area(unsigned long *map, unsigned long i,
+				int len)
+{
+	unsigned long end = i + len;
+	while (i < end) {
+		__set_bit(i, map);
+		i++;
+	}
+}
+
+static inline int is_span_boundary(unsigned int index, unsigned int nr,
+				   unsigned long shift,
+				   unsigned long boundary_size)
+{
+	shift = (shift + index) & (boundary_size - 1);
+	return shift + nr > boundary_size;
+}
+
+unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
+			       unsigned long start, unsigned int nr,
+			       unsigned long shift, unsigned long boundary_size,
+			       unsigned long align_mask)
+{
+	unsigned long index;
+again:
+	index = find_next_zero_area(map, size, start, nr, align_mask);
+	if (index != -1) {
+		if (is_span_boundary(index, nr, shift, boundary_size)) {
+			/* we could do more effectively */
+			start = index + 1;
+			goto again;
+		}
+		set_bit_area(map, index, nr);
+	}
+	return index;
+}
+EXPORT_SYMBOL(iommu_area_alloc);
+
+void iommu_area_free(unsigned long *map, unsigned long start, unsigned int nr)
+{
+	unsigned long end = start + nr;
+
+	while (start < end) {
+		__clear_bit(start, map);
+		start++;
+	}
+}
+EXPORT_SYMBOL(iommu_area_free);
-- 
1.5.3.4



^ permalink raw reply related	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-08 23:57                                                       ` 2.6.24-rc6-mm1 FUJITA Tomonori
@ 2008-01-09  0:27                                                         ` Andrew Morton
  2008-01-09  0:54                                                           ` 2.6.24-rc6-mm1 FUJITA Tomonori
  2008-01-09  9:04                                                         ` 2.6.24-rc6-mm1 Jarek Poplawski
  1 sibling, 1 reply; 146+ messages in thread
From: Andrew Morton @ 2008-01-09  0:27 UTC (permalink / raw)
  To: FUJITA Tomonori
  Cc: mingo, fujita.tomonori, just.for.lkml, tomof, jarkao2, herbert,
	linux-kernel, neilb, bfields, netdev, tom

On Wed, 09 Jan 2008 08:57:53 +0900
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> wrote:

> Andrew, can you replace
> 
> iommu-sg-add-iommu-helper-functions-for-the-free-area-management.patch
> 
> with the updated patch:
> 
> http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048997.html
> 
> For your convenience I've attached the updated patch too.

<generates the incremental>


> --- a/lib/iommu-helper.c~a
> +++ a/lib/iommu-helper.c
> @@ -8,15 +8,20 @@
>  static unsigned long find_next_zero_area(unsigned long *map,
>  					 unsigned long size,
>  					 unsigned long start,
> -					 unsigned int nr)
> +					 unsigned int nr,
> +					 unsigned long align_mask)
>  {
>  	unsigned long index, end, i;
>  again:
>  	index = find_next_zero_bit(map, size, start);
> +
> +	/* Align allocation */
> +	index = (index + align_mask) & ~align_mask;

The ALIGN() macro is the approved way of doing this.

(I don't think ALIGN adds much value really, especially given that you've
commented what's going on, but I guess it does make reviewing and reading a
little easier).


>  	end = index + nr;
> -	if (end > size)
> +	if (end >= size)
>  		return -1;
> -	for (i = index + 1; i < end; i++) {
> +	for (i = index; i < end; i++) {
>  		if (test_bit(i, map)) {
>  			start = i+1;
>  			goto again;
> @@ -50,9 +55,8 @@ unsigned long iommu_area_alloc(unsigned 
>  {
>  	unsigned long index;
>  again:
> -	index = find_next_zero_area(map, size, start, nr);
> +	index = find_next_zero_area(map, size, start, nr, align_mask);
>  	if (index != -1) {
> -		index = (index + align_mask) & ~align_mask;
>  		if (is_span_boundary(index, nr, shift, boundary_size)) {
>  			/* we could do more effectively */
>  			start = index + 1;
> _
> 
> 

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-09  0:27                                                         ` 2.6.24-rc6-mm1 Andrew Morton
@ 2008-01-09  0:54                                                           ` FUJITA Tomonori
  2008-01-09  1:07                                                             ` 2.6.24-rc6-mm1 Andrew Morton
  0 siblings, 1 reply; 146+ messages in thread
From: FUJITA Tomonori @ 2008-01-09  0:54 UTC (permalink / raw)
  To: akpm
  Cc: fujita.tomonori, mingo, just.for.lkml, tomof, jarkao2, herbert,
	linux-kernel, neilb, bfields, netdev, tom

On Tue, 8 Jan 2008 16:27:39 -0800
Andrew Morton <akpm@linux-foundation.org> wrote:

> On Wed, 09 Jan 2008 08:57:53 +0900
> FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> wrote:
> 
> > Andrew, can you replace
> > 
> > iommu-sg-add-iommu-helper-functions-for-the-free-area-management.patch
> > 
> > with the updated patch:
> > 
> > http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048997.html
> > 
> > For your convenience I've attached the updated patch too.
> 
> <generates the incremental>

Thanks for putting the fix to -mm.


> > --- a/lib/iommu-helper.c~a
> > +++ a/lib/iommu-helper.c
> > @@ -8,15 +8,20 @@
> >  static unsigned long find_next_zero_area(unsigned long *map,
> >  					 unsigned long size,
> >  					 unsigned long start,
> > -					 unsigned int nr)
> > +					 unsigned int nr,
> > +					 unsigned long align_mask)
> >  {
> >  	unsigned long index, end, i;
> >  again:
> >  	index = find_next_zero_bit(map, size, start);
> > +
> > +	/* Align allocation */
> > +	index = (index + align_mask) & ~align_mask;
> 
> The ALIGN() macro is the approved way of doing this.
> 
> (I don't think ALIGN adds much value really, especially given that you've
> commented what's going on, but I guess it does make reviewing and reading a
> little easier).

Would be better to use __ALIGN_MASK? I can find only one user who
directly use __ALIGN_MASK. The POWER IOMMU calculates align_mask by
itself so it's easier to pass align_mask as an argument.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-09  0:54                                                           ` 2.6.24-rc6-mm1 FUJITA Tomonori
@ 2008-01-09  1:07                                                             ` Andrew Morton
  0 siblings, 0 replies; 146+ messages in thread
From: Andrew Morton @ 2008-01-09  1:07 UTC (permalink / raw)
  To: FUJITA Tomonori
  Cc: fujita.tomonori, mingo, just.for.lkml, tomof, jarkao2, herbert,
	linux-kernel, neilb, bfields, netdev, tom

On Wed, 09 Jan 2008 09:54:45 +0900
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> wrote:

> > > --- a/lib/iommu-helper.c~a
> > > +++ a/lib/iommu-helper.c
> > > @@ -8,15 +8,20 @@
> > >  static unsigned long find_next_zero_area(unsigned long *map,
> > >  					 unsigned long size,
> > >  					 unsigned long start,
> > > -					 unsigned int nr)
> > > +					 unsigned int nr,
> > > +					 unsigned long align_mask)
> > >  {
> > >  	unsigned long index, end, i;
> > >  again:
> > >  	index = find_next_zero_bit(map, size, start);
> > > +
> > > +	/* Align allocation */
> > > +	index = (index + align_mask) & ~align_mask;
> > 
> > The ALIGN() macro is the approved way of doing this.
> > 
> > (I don't think ALIGN adds much value really, especially given that you've
> > commented what's going on, but I guess it does make reviewing and reading a
> > little easier).
> 
> Would be better to use __ALIGN_MASK? I can find only one user who
> directly use __ALIGN_MASK. The POWER IOMMU calculates align_mask by
> itself so it's easier to pass align_mask as an argument.

ALIGN() should be OK - its aditional type coercion isn't useful in this
case but ALIGN() is the official interface.

I don't see any reason why vermilion.c had to reach for __ALIGN_MASK.  I'll
switch it to ALIGN().


^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-08 23:57                                                       ` 2.6.24-rc6-mm1 FUJITA Tomonori
  2008-01-09  0:27                                                         ` 2.6.24-rc6-mm1 Andrew Morton
@ 2008-01-09  9:04                                                         ` Jarek Poplawski
  2008-01-10  0:54                                                           ` 2.6.24-rc6-mm1 FUJITA Tomonori
  1 sibling, 1 reply; 146+ messages in thread
From: Jarek Poplawski @ 2008-01-09  9:04 UTC (permalink / raw)
  To: FUJITA Tomonori
  Cc: mingo, akpm, just.for.lkml, tomof, herbert, linux-kernel, neilb,
	bfields, netdev, tom

On Wed, Jan 09, 2008 at 08:57:53AM +0900, FUJITA Tomonori wrote:
...
> diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c
> new file mode 100644
> index 0000000..495575a
> --- /dev/null
> +++ b/lib/iommu-helper.c
> @@ -0,0 +1,80 @@
> +/*
> + * IOMMU helper functions for the free area management
> + */
> +
> +#include <linux/module.h>
> +#include <linux/bitops.h>
> +
> +static unsigned long find_next_zero_area(unsigned long *map,
> +					 unsigned long size,
> +					 unsigned long start,
> +					 unsigned int nr,
> +					 unsigned long align_mask)
> +{
> +	unsigned long index, end, i;
> +again:
> +	index = find_next_zero_bit(map, size, start);
> +
> +	/* Align allocation */
> +	index = (index + align_mask) & ~align_mask;
> +
> +	end = index + nr;
> +	if (end >= size)
> +		return -1;

This '>=' looks doubtful to me, e.g.:
map points to 0s only,  size = 64, nr = 64,
we get: index = 0; end = 64;
and: return -1 ?!

Regards,
Jarek P.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-09  9:04                                                         ` 2.6.24-rc6-mm1 Jarek Poplawski
@ 2008-01-10  0:54                                                           ` FUJITA Tomonori
  0 siblings, 0 replies; 146+ messages in thread
From: FUJITA Tomonori @ 2008-01-10  0:54 UTC (permalink / raw)
  To: jarkao2
  Cc: fujita.tomonori, mingo, akpm, just.for.lkml, tomof, herbert,
	linux-kernel, neilb, bfields, netdev, tom

On Wed, 9 Jan 2008 10:04:42 +0100
Jarek Poplawski <jarkao2@gmail.com> wrote:

> On Wed, Jan 09, 2008 at 08:57:53AM +0900, FUJITA Tomonori wrote:
> ...
> > diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c
> > new file mode 100644
> > index 0000000..495575a
> > --- /dev/null
> > +++ b/lib/iommu-helper.c
> > @@ -0,0 +1,80 @@
> > +/*
> > + * IOMMU helper functions for the free area management
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/bitops.h>
> > +
> > +static unsigned long find_next_zero_area(unsigned long *map,
> > +					 unsigned long size,
> > +					 unsigned long start,
> > +					 unsigned int nr,
> > +					 unsigned long align_mask)
> > +{
> > +	unsigned long index, end, i;
> > +again:
> > +	index = find_next_zero_bit(map, size, start);
> > +
> > +	/* Align allocation */
> > +	index = (index + align_mask) & ~align_mask;
> > +
> > +	end = index + nr;
> > +	if (end >= size)
> > +		return -1;
> 
> This '>=' looks doubtful to me, e.g.:
> map points to 0s only,  size = 64, nr = 64,
> we get: index = 0; end = 64;
> and: return -1 ?!

You are right. I did it only because I didn't want to change the
original code (iommu_range_alloc in arch/powerpc/kernel/iommu.c). I
thought that there might be a mysterious reason for it so I let it
alone since it's tiny loss.

Thanks,

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1 (driver core/sysfs)
  2007-12-31 20:11 ` 2.6.24-rc6-mm1 (driver core/sysfs) Randy Dunlap
@ 2008-01-12  1:05   ` Greg KH
  2008-01-14 16:11     ` [patch] auto-qa Kconfig Ingo Molnar
  0 siblings, 1 reply; 146+ messages in thread
From: Greg KH @ 2008-01-12  1:05 UTC (permalink / raw)
  To: Randy Dunlap, Ingo Molnar; +Cc: Andrew Morton, linux-kernel

On Mon, Dec 31, 2007 at 12:11:15PM -0800, Randy Dunlap wrote:
> On Sat, 22 Dec 2007 23:30:56 -0800 Andrew Morton wrote:
> 
> > 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc6/2.6.24-rc6-mm1/
> 
> 
> With CONFIG_BLOCK=n:
> 
>   LD      drivers/block/built-in.o
> /local/linsrc/linux-2.6.24-rc6-mm1/drivers/base/core.c: In function 'device_add_class_symlinks':
> /local/linsrc/linux-2.6.24-rc6-mm1/drivers/base/core.c:707: error: 'part_type' undeclared (first use in this function)
> /local/linsrc/linux-2.6.24-rc6-mm1/drivers/base/core.c: In function 'device_remove_class_symlinks':
> /local/linsrc/linux-2.6.24-rc6-mm1/drivers/base/core.c:746: error: 'part_type' undeclared (first use in this function)
> make[3]: *** [drivers/base/core.o] Error 1
> 
> 
> and that is after fixing (in some sense) the first CONFIG_BLOCK=n
> problem with the patch below.  Please test lots of configs.
> and/or use 'make randconfig' (automated, scripted, e.g., etc.).
> maybe check Documentation/SubmitChecklist.  :)

Ingo seems to be saying that he has some kind of "automated" build
system to do this kind of checking.  Ingo, did you ever post how you did
this anywhere?  I have enough spare machines here that I should be able
to set up something to test my stuff this way easier than doing it by
hand all the time (as the above problem proves I do miss things :(  )

> ---
> 
> From: Randy Dunlap <randy.dunlap@oracle.com>
> 
> Parts of driver core use blk_lookup_devt() when CONFIG_BLOCK=n,
> so provide an short inline version of it for that case.
> 
> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>

Thanks for this patch, I've merged it with the original block patch so
there is no regression along the way.

greg k-h

^ permalink raw reply	[flat|nested] 146+ messages in thread

* [patch] auto-qa Kconfig
  2008-01-12  1:05   ` Greg KH
@ 2008-01-14 16:11     ` Ingo Molnar
  2008-01-15 22:13       ` Pavel Machek
  0 siblings, 1 reply; 146+ messages in thread
From: Ingo Molnar @ 2008-01-14 16:11 UTC (permalink / raw)
  To: Greg KH; +Cc: Randy Dunlap, Andrew Morton, linux-kernel, Arjan van de Ven


* Greg KH <greg@kroah.com> wrote:

> > and that is after fixing (in some sense) the first CONFIG_BLOCK=n 
> > problem with the patch below.  Please test lots of configs. and/or 
> > use 'make randconfig' (automated, scripted, e.g., etc.). maybe check 
> > Documentation/SubmitChecklist.  :)
> 
> Ingo seems to be saying that he has some kind of "automated" build 
> system to do this kind of checking.  Ingo, did you ever post how you 
> did this anywhere?  I have enough spare machines here that I should be 
> able to set up something to test my stuff this way easier than doing 
> it by hand all the time (as the above problem proves I do miss things 
> :( )

the crux of it is this patch:

  http://redhat.com/~mingo/auto-qa-patches/Kconfig-qa.patch

(ontop of x86.git)

adjust your arch/x86/Kconfig.needed whitelist (should already work on 
typical systems) and do a 'make randconfig'. Every config is supposed to 
build and boot fine, including 'make allnoconfig' and 'make 
allyesconfig'. And please let me know about any blacklist items as well. 
(right now they are a bit hacky via a "depends on 0" line and a small 
comment explaining why they are not suitable in a bzImage kernel.)

( the CONFIG_BOOTPARAM stuff is there to easily randomize boot options - 
we frequently have regressions that only trigger with certain boot 
option combinations. )

it's somewhat hackish in places. The rest of my scripts (to scp a new 
kernel image, to reboot a testbox, etc.) tie in to my specific 
environment quite closely and make no sense to be posted. (they are also 
quite ugly)

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: [patch] auto-qa Kconfig
  2008-01-14 16:11     ` [patch] auto-qa Kconfig Ingo Molnar
@ 2008-01-15 22:13       ` Pavel Machek
  0 siblings, 0 replies; 146+ messages in thread
From: Pavel Machek @ 2008-01-15 22:13 UTC (permalink / raw)
  To: Ingo Molnar; +Cc: kernel list

On Mon 2008-01-14 17:11:50, Ingo Molnar wrote:
> 
> * Greg KH <greg@kroah.com> wrote:
> 
> > > and that is after fixing (in some sense) the first CONFIG_BLOCK=n 
> > > problem with the patch below.  Please test lots of configs. and/or 
> > > use 'make randconfig' (automated, scripted, e.g., etc.). maybe check 
> > > Documentation/SubmitChecklist.  :)
> > 
> > Ingo seems to be saying that he has some kind of "automated" build 
> > system to do this kind of checking.  Ingo, did you ever post how you 
> > did this anywhere?  I have enough spare machines here that I should be 
> > able to set up something to test my stuff this way easier than doing 
> > it by hand all the time (as the above problem proves I do miss things 
> > :( )
> 
> the crux of it is this patch:
> 
>   http://redhat.com/~mingo/auto-qa-patches/Kconfig-qa.patch
> 
> (ontop of x86.git)
> 
> adjust your arch/x86/Kconfig.needed whitelist (should already work on 
> typical systems) and do a 'make randconfig'. Every config is supposed to 
> build and boot fine, including 'make allnoconfig' and 'make 
> allyesconfig'. And please let me know about any blacklist items as well. 
> (right now they are a bit hacky via a "depends on 0" line and a small 
> comment explaining why they are not suitable in a bzImage kernel.)

 config X86_ELAN
        bool "AMD Elan"
        depends on X86_32
+
+       # dangerous to boot on non-Elan CPUs
+       depends on 0
+
        help
          Select this for an AMD Elan processor.


Hmmm... Most options like "support 386" are of "add support for 386,
but do not break support for pentium". ELAN etc seem to be
exceptions. Perhaps options that _take away_ functionality (like ELAN
-- takes ability to boot on normal 386)  should be specifically marked
somehow?

depends on EXCLUSIVE_FEATURE

?

depends on NOT_A_FEATURE

?
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-07  6:16                                                   ` 2.6.24-rc6-mm1 FUJITA Tomonori
  2008-01-08 15:59                                                     ` 2.6.24-rc6-mm1 Ingo Molnar
@ 2008-01-25 21:06                                                     ` Torsten Kaiser
  1 sibling, 0 replies; 146+ messages in thread
From: Torsten Kaiser @ 2008-01-25 21:06 UTC (permalink / raw)
  To: FUJITA Tomonori
  Cc: tomof, akpm, jarkao2, herbert, linux-kernel, neilb, bfields, netdev, tom

Sorry for the *really* late answer, but I did not have any time to do
linux things the last weeks. :-(

On Jan 7, 2008 7:16 AM, FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> wrote:
> On Sun, 6 Jan 2008 21:03:42 +0100
> "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > On Jan 6, 2008 2:33 PM, FUJITA Tomonori <tomof@acm.org> wrote:
> > > On Sun, 6 Jan 2008 12:35:35 +0100
> > > "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > > > On Jan 6, 2008 12:23 PM, FUJITA Tomonori <tomof@acm.org> wrote:
> > > > And double using something does fit with the errors I'm seeing...
> > > >
> > > > > Can you try the patch to revert my IOMMU changes?
> > > > >
> > > > > http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12694.html

-> This is the revert-patch I'm talking about later

> > > > Testing for this bug is a little bit slow, as I'm compiling ~100
> > > > packages trying to trigger it.
> > > > If my current testrun with the patch from
> > > > http://www.mail-archive.com/linux-scsi@vger.kernel.org/msg12702.html
> > > > crashes, I will revert the hole IOMMU changes with above patch and try again.
> > >
> > > Thanks for testing,
> >
> > OK, I'm still testing this, but after 95 completed packages I'm rather
> > certain that reverting the IOMMU changes with this patch fixes my
> > problem.
> > I didn't have time to look more into this, so I can't offer any
> > concrete ideas where the bug is.

Until my last mail from 7. Jan this was true, that I was not able to
crash 2.6.24-rc6-mm1 with above patch.
But after testing 2.6.24-rc7 with only the IOMMU changes applied it
did crash once again.

After looking at the patch that seems rather expected as it only
touches powerpc code.
(I only looked at its diffstat after testing it, so I was not aware of
that fact during testing)

> > If you send more patches, I'm willing to test them, but it might take
> > some more time during the next week.
>
> Can you try 2.6.24-rc7 + the IOMMU changes?
>
> The patches are available at:
>
> http://www.kernel.org/pub/linux/kernel/people/tomo/iommu/
>
> Or if you prefer the git tree:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tomo/linux-2.6-misc.git iommu-sg-fixes
>
>
>
> I've looked at the changes to GART but they are straightforward and
> don't look wrong...

The resulting 2.6.24-rc7 kernel worked for me. I compiled 146 packages
without a crash.

Today I finally had some time for debugging again and tried the new
2.6.24-rc8-mm1.
The crash is still there, I will report that crash in current thread.

Torsten

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 16:18                     ` 2.6.24-rc6-mm1 Ingo Molnar
@ 2008-01-02 22:49                       ` Alan Cox
  0 siblings, 0 replies; 146+ messages in thread
From: Alan Cox @ 2008-01-02 22:49 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Peter Zijlstra, Nick Piggin, Herbert Xu, Andrew Morton, trem,
	Linux Kernel Mailing List

> could we perhaps just replace it with a tty_mutex? (possibly a recursive 
> one) I suspect by now most of the BKL dependencies there have become 
> local to the tty code? Or are there deep VFS dependencies as well? (if 
> yes, what type of dependencies?)

The big problem is that nobody actually knows where all the dependancies
are. That is why I've started with the bits we can decipher so that it
simplifies the mess each time we clean up the locking of some lower level
aspect.

Almost all the serial drivers clone the same open and release methods (or
worse older versions of it) so that also needs doing. Lots to do, so
little time.

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 13:26                   ` 2.6.24-rc6-mm1 Alan Cox
@ 2008-01-02 16:18                     ` Ingo Molnar
  2008-01-02 22:49                       ` 2.6.24-rc6-mm1 Alan Cox
  0 siblings, 1 reply; 146+ messages in thread
From: Ingo Molnar @ 2008-01-02 16:18 UTC (permalink / raw)
  To: Alan Cox
  Cc: Peter Zijlstra, Nick Piggin, Herbert Xu, Andrew Morton, trem,
	Linux Kernel Mailing List


* Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:

> > BKL properties, that could be wrapped. I guess fixing the TTY code 
> > to have no BKL dependencies has a higher chance of success - given 
> > that Alan is working on it :-)
> 
> Bit by bit when I can face it, and with a lot of other people 
> contributing parts. Right now the BKL mostly protects the open/close 
> paths and those are *really* ugly

could we perhaps just replace it with a tty_mutex? (possibly a recursive 
one) I suspect by now most of the BKL dependencies there have become 
local to the tty code? Or are there deep VFS dependencies as well? (if 
yes, what type of dependencies?)

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 12:19                 ` 2.6.24-rc6-mm1 Ingo Molnar
@ 2008-01-02 13:26                   ` Alan Cox
  2008-01-02 16:18                     ` 2.6.24-rc6-mm1 Ingo Molnar
  0 siblings, 1 reply; 146+ messages in thread
From: Alan Cox @ 2008-01-02 13:26 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Peter Zijlstra, Nick Piggin, Herbert Xu, Andrew Morton, trem,
	Linux Kernel Mailing List

> BKL properties, that could be wrapped. I guess fixing the TTY code to 
> have no BKL dependencies has a higher chance of success - given that 
> Alan is working on it :-)

Bit by bit when I can face it, and with a lot of other people
contributing parts. Right now the BKL mostly protects the open/close
paths and those are *really* ugly

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 11:24               ` 2.6.24-rc6-mm1 Peter Zijlstra
@ 2008-01-02 12:19                 ` Ingo Molnar
  2008-01-02 13:26                   ` 2.6.24-rc6-mm1 Alan Cox
  0 siblings, 1 reply; 146+ messages in thread
From: Ingo Molnar @ 2008-01-02 12:19 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Nick Piggin, Herbert Xu, Andrew Morton, trem,
	Linux Kernel Mailing List, Alan Cox


* Peter Zijlstra <peterz@infradead.org> wrote:

> >  It would be sweet to have them use private mutexes for the job 
> > instead (although even then it probably wouldn't be a straight 
> > conversion)...
> 
> I tried a quick conversion of reiser3 at the time, but it really wants 
> a recursive lock and I couldn't be bothered to fix a 'legacy' 
> filesystem so I just gave up and converted the filesystem to XFS.

as long as the only requirement is recursion, and not any of the other 
BKL properties, that could be wrapped. I guess fixing the TTY code to 
have no BKL dependencies has a higher chance of success - given that 
Alan is working on it :-)

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 11:12             ` 2.6.24-rc6-mm1 Nick Piggin
@ 2008-01-02 11:24               ` Peter Zijlstra
  2008-01-02 12:19                 ` 2.6.24-rc6-mm1 Ingo Molnar
  0 siblings, 1 reply; 146+ messages in thread
From: Peter Zijlstra @ 2008-01-02 11:24 UTC (permalink / raw)
  To: Nick Piggin
  Cc: Ingo Molnar, Herbert Xu, Andrew Morton, trem,
	Linux Kernel Mailing List, Alan Cox


On Wed, 2008-01-02 at 22:12 +1100, Nick Piggin wrote:
> On Wednesday 02 January 2008 22:01, Peter Zijlstra wrote:

> > I've seen 1s+ desktop latencies due to PREEMPT_BKL when I was still
> > using reiserfs.
> 
> Fair enough; so the former ifdefery would be preferable for now then.

To be honest, I must mention that the load that did that was a kernel
build -j5 on a dual socket Athlon MP box. With a current kernel and XFS
that load is making the box slow but its still very servicable.

> > Both reiserfs and tty were fighting for the bkl and massive prio
> > inversion ensued. Turning PREEMPT_BKL off made the system usable again.
> 
> Are either of those subsystems actually using the BKL to protect against
> anything else (than themselves)?

I doubt it.

IIRC Alan is working on getting tty BKL free.

>  It would be sweet to have them use
> private mutexes for the job instead (although even then it probably
> wouldn't be a straight conversion)...

I tried a quick conversion of reiser3 at the time, but it really wants a
recursive lock and I couldn't be bothered to fix a 'legacy' filesystem
so I just gave up and converted the filesystem to XFS.


^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 11:01           ` 2.6.24-rc6-mm1 Peter Zijlstra
@ 2008-01-02 11:12             ` Nick Piggin
  2008-01-02 11:24               ` 2.6.24-rc6-mm1 Peter Zijlstra
  0 siblings, 1 reply; 146+ messages in thread
From: Nick Piggin @ 2008-01-02 11:12 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Ingo Molnar, Herbert Xu, Andrew Morton, trem, Linux Kernel Mailing List

On Wednesday 02 January 2008 22:01, Peter Zijlstra wrote:
> On Wed, 2008-01-02 at 21:31 +1100, Nick Piggin wrote:
> > On Monday 31 December 2007 00:10, Ingo Molnar wrote:
> > > * Herbert Xu <herbert@gondor.apana.org.au> wrote:
> > > > > Ingo, it's not good that we have cond_resched() definitions
> > > > > conditionally duplicated in kernel.h - that's increasing the risk
> > > > > of bugs like this one.
> > > >
> > > > Actually, why do we even have cond_resched when real preemption is
> > > > on? It seems to be a waste of space and time.
> > >
> > > due to the BKL. cond_resched() in BKL code breaks up BKL latencies.
> > >
> > > i dont mind not doing that though - we should increase the pain for BKL
> > > users, so that subsystems finally get rid of it altogether.
> > > lock_kernel() use within the kernel is still rampant - there are still
> > > more than 400 callsites to lock_kernel().
> >
> > It would be silly to potentially increase latency in some areas
> > for CONFIG_PREEMPT kernels, though.
> >
> > Better may be to detect when there is CONFIG_PREEMPT and
> > CONFIG_PREEMPT_BKL, and ifdef away the cond_resched in that case
> > (or -- why do we even make CONFIG_PREEMPT_BKL an option? Are there
> > really workloads left where it causes throughput regressions?)
>
> I've seen 1s+ desktop latencies due to PREEMPT_BKL when I was still
> using reiserfs.

Fair enough; so the former ifdefery would be preferable for now then.

> Both reiserfs and tty were fighting for the bkl and massive prio
> inversion ensued. Turning PREEMPT_BKL off made the system usable again.

Are either of those subsystems actually using the BKL to protect against
anything else (than themselves)? It would be sweet to have them use
private mutexes for the job instead (although even then it probably
wouldn't be a straight conversion)...

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 10:31         ` 2.6.24-rc6-mm1 Nick Piggin
  2008-01-02 11:01           ` 2.6.24-rc6-mm1 Peter Zijlstra
@ 2008-01-02 11:08           ` Ingo Molnar
  1 sibling, 0 replies; 146+ messages in thread
From: Ingo Molnar @ 2008-01-02 11:08 UTC (permalink / raw)
  To: Nick Piggin; +Cc: Herbert Xu, Andrew Morton, trem, Linux Kernel Mailing List


* Nick Piggin <nickpiggin@yahoo.com.au> wrote:

> (or -- why do we even make CONFIG_PREEMPT_BKL an option? [...]

thanks for the reminder - i just zapped it. Was a pleasure ;-)

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2008-01-02 10:31         ` 2.6.24-rc6-mm1 Nick Piggin
@ 2008-01-02 11:01           ` Peter Zijlstra
  2008-01-02 11:12             ` 2.6.24-rc6-mm1 Nick Piggin
  2008-01-02 11:08           ` 2.6.24-rc6-mm1 Ingo Molnar
  1 sibling, 1 reply; 146+ messages in thread
From: Peter Zijlstra @ 2008-01-02 11:01 UTC (permalink / raw)
  To: Nick Piggin
  Cc: Ingo Molnar, Herbert Xu, Andrew Morton, trem, Linux Kernel Mailing List


On Wed, 2008-01-02 at 21:31 +1100, Nick Piggin wrote:
> On Monday 31 December 2007 00:10, Ingo Molnar wrote:
> > * Herbert Xu <herbert@gondor.apana.org.au> wrote:
> > > > Ingo, it's not good that we have cond_resched() definitions
> > > > conditionally duplicated in kernel.h - that's increasing the risk of
> > > > bugs like this one.
> > >
> > > Actually, why do we even have cond_resched when real preemption is on?
> > > It seems to be a waste of space and time.
> >
> > due to the BKL. cond_resched() in BKL code breaks up BKL latencies.
> >
> > i dont mind not doing that though - we should increase the pain for BKL
> > users, so that subsystems finally get rid of it altogether.
> > lock_kernel() use within the kernel is still rampant - there are still
> > more than 400 callsites to lock_kernel().
> 
> It would be silly to potentially increase latency in some areas
> for CONFIG_PREEMPT kernels, though.
> 
> Better may be to detect when there is CONFIG_PREEMPT and
> CONFIG_PREEMPT_BKL, and ifdef away the cond_resched in that case
> (or -- why do we even make CONFIG_PREEMPT_BKL an option? Are there
> really workloads left where it causes throughput regressions?)

I've seen 1s+ desktop latencies due to PREEMPT_BKL when I was still
using reiserfs.

Both reiserfs and tty were fighting for the bkl and massive prio
inversion ensued. Turning PREEMPT_BKL off made the system usable again.


^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-30 13:10       ` 2.6.24-rc6-mm1 Ingo Molnar
@ 2008-01-02 10:31         ` Nick Piggin
  2008-01-02 11:01           ` 2.6.24-rc6-mm1 Peter Zijlstra
  2008-01-02 11:08           ` 2.6.24-rc6-mm1 Ingo Molnar
  0 siblings, 2 replies; 146+ messages in thread
From: Nick Piggin @ 2008-01-02 10:31 UTC (permalink / raw)
  To: Ingo Molnar; +Cc: Herbert Xu, Andrew Morton, trem, Linux Kernel Mailing List

On Monday 31 December 2007 00:10, Ingo Molnar wrote:
> * Herbert Xu <herbert@gondor.apana.org.au> wrote:
> > > Ingo, it's not good that we have cond_resched() definitions
> > > conditionally duplicated in kernel.h - that's increasing the risk of
> > > bugs like this one.
> >
> > Actually, why do we even have cond_resched when real preemption is on?
> > It seems to be a waste of space and time.
>
> due to the BKL. cond_resched() in BKL code breaks up BKL latencies.
>
> i dont mind not doing that though - we should increase the pain for BKL
> users, so that subsystems finally get rid of it altogether.
> lock_kernel() use within the kernel is still rampant - there are still
> more than 400 callsites to lock_kernel().

It would be silly to potentially increase latency in some areas
for CONFIG_PREEMPT kernels, though.

Better may be to detect when there is CONFIG_PREEMPT and
CONFIG_PREEMPT_BKL, and ifdef away the cond_resched in that case
(or -- why do we even make CONFIG_PREEMPT_BKL an option? Are there
really workloads left where it causes throughput regressions?)

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
  2007-12-24  1:25     ` 2.6.24-rc6-mm1 Herbert Xu
@ 2007-12-30 13:10       ` Ingo Molnar
  2008-01-02 10:31         ` 2.6.24-rc6-mm1 Nick Piggin
  0 siblings, 1 reply; 146+ messages in thread
From: Ingo Molnar @ 2007-12-30 13:10 UTC (permalink / raw)
  To: Herbert Xu; +Cc: Andrew Morton, trem, Linux Kernel Mailing List


* Herbert Xu <herbert@gondor.apana.org.au> wrote:

> > Ingo, it's not good that we have cond_resched() definitions 
> > conditionally duplicated in kernel.h - that's increasing the risk of 
> > bugs like this one.
> 
> Actually, why do we even have cond_resched when real preemption is on? 
> It seems to be a waste of space and time.

due to the BKL. cond_resched() in BKL code breaks up BKL latencies.

i dont mind not doing that though - we should increase the pain for BKL 
users, so that subsystems finally get rid of it altogether. 
lock_kernel() use within the kernel is still rampant - there are still 
more than 400 callsites to lock_kernel().

	Ingo

^ permalink raw reply	[flat|nested] 146+ messages in thread

* Re: 2.6.24-rc6-mm1
       [not found]   ` <20071223121410.0d572e03.akpm@linux-foundation.org>
@ 2007-12-24  1:25     ` Herbert Xu
  2007-12-30 13:10       ` 2.6.24-rc6-mm1 Ingo Molnar
  0 siblings, 1 reply; 146+ messages in thread
From: Herbert Xu @ 2007-12-24  1:25 UTC (permalink / raw)
  To: Andrew Morton; +Cc: trem, Ingo Molnar, Linux Kernel Mailing List

On Sun, Dec 23, 2007 at 12:14:10PM -0800, Andrew Morton wrote:
>
> No, the problem is that include/crypto/scatterwalk.h doesn't include enough
> header files to support its inlining fetish.  It needs sched.h.

I'll get it fixed in cryptodev.

> Ingo, it's not good that we have cond_resched() definitions conditionally
> duplicated in kernel.h - that's increasing the risk of bugs like this one.

Actually, why do we even have cond_resched when real preemption
is on? It seems to be a waste of space and time.

Any objections to something like this to remove cond_resched with
CONFIG_PREEMPT on (apart from the potential to uncover more bugs
like this one)?

Cheers,
-- 
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
--
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 94bc996..a7283c9 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -105,8 +105,8 @@ struct user;
  * supposed to.
  */
 #ifdef CONFIG_PREEMPT_VOLUNTARY
-extern int cond_resched(void);
-# define might_resched() cond_resched()
+extern int _cond_resched(void);
+# define might_resched() _cond_resched()
 #else
 # define might_resched() do { } while (0)
 #endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index ac3d496..ae8e9bd 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1863,7 +1863,18 @@ static inline int need_resched(void)
  * cond_resched_lock() will drop the spinlock before scheduling,
  * cond_resched_softirq() will enable bhs before scheduling.
  */
-extern int cond_resched(void);
+#ifdef CONFIG_PREEMPT
+static inline int cond_resched(void)
+{
+	return 0;
+}
+#else
+extern int _cond_resched(void);
+static inline int cond_resched(void)
+{
+	return _cond_resched();
+}
+#endif
 extern int cond_resched_lock(spinlock_t * lock);
 extern int cond_resched_softirq(void);
 
diff --git a/kernel/sched.c b/kernel/sched.c
index 3df84ea..2dc2bbf 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4683,7 +4683,8 @@ static void __cond_resched(void)
 	} while (need_resched());
 }
 
-int __sched cond_resched(void)
+#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PREEMPT_VOLUNTARY)
+int __sched _cond_resched(void)
 {
 	if (need_resched() && !(preempt_count() & PREEMPT_ACTIVE) &&
 					system_state == SYSTEM_RUNNING) {
@@ -4692,7 +4693,8 @@ int __sched cond_resched(void)
 	}
 	return 0;
 }
-EXPORT_SYMBOL(cond_resched);
+EXPORT_SYMBOL(_cond_resched);
+#endif
 
 /*
  * cond_resched_lock() - if a reschedule is pending, drop the given lock,

^ permalink raw reply related	[flat|nested] 146+ messages in thread

end of thread, other threads:[~2008-01-25 21:06 UTC | newest]

Thread overview: 146+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-12-23  7:30 2.6.24-rc6-mm1 Andrew Morton
2007-12-23 11:04 ` 2.6.24-rc6-mm1 Ingo Molnar
2007-12-23 11:10   ` 2.6.24-rc6-mm1 Ingo Molnar
2007-12-23 11:34     ` 2.6.24-rc6-mm1 Andrew Morton
2007-12-23 11:57       ` 2.6.24-rc6-mm1 Ingo Molnar
2007-12-23 12:12         ` 2.6.24-rc6-mm1 Christoph Hellwig
2007-12-23 12:35 ` 2.6.24-rc6-mm1 Rafael J. Wysocki
2007-12-23 13:00   ` 2.6.24-rc6-mm1 Ingo Molnar
2007-12-23 13:48     ` 2.6.24-rc6-mm1 Rafael J. Wysocki
2007-12-23 13:53       ` 2.6.24-rc6-mm1 Rafael J. Wysocki
2007-12-23 20:09         ` 2.6.24-rc6-mm1 Sam Ravnborg
2007-12-23 22:44           ` 2.6.24-rc6-mm1 Rafael J. Wysocki
2008-01-02 20:05             ` [patch] x86 compat_binfmt_elf, Makefile fixes (was: Re: 2.6.24-rc6-mm1) Ingo Molnar
2008-01-02 20:32               ` Rafael J. Wysocki
2008-01-02 20:43                 ` Ingo Molnar
2007-12-23 23:09   ` 2.6.24-rc6-mm1 H. Peter Anvin
2007-12-23 16:27 ` 2.6.24-rc6-mm1 Torsten Kaiser
2007-12-23 20:39   ` 2.6.24-rc6-mm1 Andrew Morton
2007-12-27 11:42     ` 2.6.24-rc6-mm1 Torsten Kaiser
2007-12-27 14:30       ` 2.6.24-rc6-mm1 Torsten Kaiser
2007-12-28 22:53   ` 2.6.24-rc6-mm1 Torsten Kaiser
2007-12-28 23:07     ` 2.6.24-rc6-mm1 Andrew Morton
2007-12-29 16:51       ` 2.6.24-rc6-mm1 Torsten Kaiser
2007-12-30  1:30         ` 2.6.24-rc6-mm1 Herbert Xu
2007-12-30  3:34           ` 2.6.24-rc6-mm1 Torsten Kaiser
2007-12-30  5:41             ` 2.6.24-rc6-mm1 Randy Dunlap
2007-12-31 20:15             ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-01 12:04               ` 2.6.24-rc6-mm1 Herbert Xu
2008-01-01 12:59                 ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-01 18:29                   ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-02 18:29                 ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-02 21:51                   ` 2.6.24-rc6-mm1 Herbert Xu
2008-01-02 21:57                     ` 2.6.24-rc6-mm1 J. Bruce Fields
2008-01-03  5:02                       ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-03 15:37                       ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-03 18:52                         ` 2.6.24-rc6-mm1 J. Bruce Fields
2008-01-04 10:23                     ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-04 13:30                       ` 2.6.24-rc6-mm1 Jarek Poplawski
2008-01-04 15:21                         ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-04 21:24                           ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-05  0:07                           ` 2.6.24-rc6-mm1 Jarek Poplawski
2008-01-05  8:01                             ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-05 10:13                               ` 2.6.24-rc6-mm1 Jarek Poplawski
2008-01-05 14:52                                 ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-05 22:10                                   ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-06  1:25                                     ` 2.6.24-rc6-mm1 Andrew Morton
2008-01-06  3:28                                       ` 2.6.24-rc6-mm1 FUJITA Tomonori
2008-01-06 10:41                                         ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-06 11:23                                           ` 2.6.24-rc6-mm1 FUJITA Tomonori
2008-01-06 11:35                                             ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-06 13:33                                               ` 2.6.24-rc6-mm1 FUJITA Tomonori
2008-01-06 20:03                                                 ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-07  6:16                                                   ` 2.6.24-rc6-mm1 FUJITA Tomonori
2008-01-08 15:59                                                     ` 2.6.24-rc6-mm1 Ingo Molnar
2008-01-08 23:57                                                       ` 2.6.24-rc6-mm1 FUJITA Tomonori
2008-01-09  0:27                                                         ` 2.6.24-rc6-mm1 Andrew Morton
2008-01-09  0:54                                                           ` 2.6.24-rc6-mm1 FUJITA Tomonori
2008-01-09  1:07                                                             ` 2.6.24-rc6-mm1 Andrew Morton
2008-01-09  9:04                                                         ` 2.6.24-rc6-mm1 Jarek Poplawski
2008-01-10  0:54                                                           ` 2.6.24-rc6-mm1 FUJITA Tomonori
2008-01-25 21:06                                                     ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-06  3:16                                     ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-06  8:27                                   ` 2.6.24-rc6-mm1 Jarek Poplawski
2008-01-06 10:30                                     ` 2.6.24-rc6-mm1 Torsten Kaiser
2008-01-06 14:52                                       ` 2.6.24-rc6-mm1 Jarek Poplawski
2007-12-30 21:24       ` 2.6.24-rc6-mm1 J. Bruce Fields
2007-12-30 21:35         ` 2.6.24-rc6-mm1 Torsten Kaiser
2007-12-31 13:17           ` 2.6.24-rc6-mm1 Torsten Kaiser
2007-12-23 22:54 ` 2.6.24-rc6-mm1: suspend broken on HP nx6325 due to cpufreq changes Rafael J. Wysocki
2007-12-23 22:50   ` Andrew Morton
2007-12-23 22:56     ` Dave Jones
2007-12-24 11:21     ` Takashi Iwai
2007-12-24 14:13       ` Rafael J. Wysocki
2007-12-25 21:51 ` 2.6.24-rc6-mm1 Andreas Mohr
2007-12-26  5:43 ` 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage Valdis.Kletnieks
2007-12-26  7:34   ` James Morris
2007-12-26  8:25     ` Valdis.Kletnieks
2007-12-26  8:52       ` James Morris
2007-12-26 14:16         ` James Morris
2007-12-26 22:46           ` Andrew Morton
2007-12-26 23:39             ` 2.6.24-rc6-mm1 - e1000 breakage James Morris
2007-12-26 16:44         ` 2.6.24-rc6-mm1 - git-lblnet.patch and networking horkage Valdis.Kletnieks
2007-12-26  8:37 ` 2.6.24-rc6-mm1 Dave Young
2007-12-26 12:29 ` 2.6.24-rc6-mm1: some section mismatches on sparc64 Mariusz Kozlowski
2007-12-27  3:05   ` David Miller
2007-12-28 23:22     ` Adrian Bunk
2007-12-29  8:14       ` David Miller
2007-12-29  8:27         ` David Miller
2007-12-29  8:48         ` Adrian Bunk
2007-12-29  8:54           ` David Miller
2007-12-29  9:06             ` Adrian Bunk
2007-12-29  9:18               ` David Miller
2007-12-29  9:53                 ` Adrian Bunk
2007-12-29  9:15             ` David Miller
2007-12-27  2:21 ` 2.6.24-rc6-mm1: __raw_spin_is_contended undefined Joseph Fannin
2007-12-27  5:21   ` Nick Piggin
2007-12-27  6:04 ` 2.6.24-rc6-mm1 - drivers/char/tpm/tpm_bios.c oddness? Valdis.Kletnieks
2007-12-27  8:49 ` 2.6.24-rc6-mm1 Kernel panics at different functions () Kamalesh Babulal
2007-12-27  9:54   ` Andrew Morton
2007-12-27 10:25     ` Kamalesh Babulal
2007-12-28  9:11     ` Kamalesh Babulal
2007-12-28 13:03       ` Dhaval Giani
2007-12-27  9:16 ` 2.6.24-rc6-mm1 - power_supply driver dmesg weirdness? Valdis.Kletnieks
2007-12-27 17:54 ` 2.6.24-rc6-mm1 - crash in tick_sched_timer/update_process_times Valdis.Kletnieks
2007-12-28  7:34   ` Andrew Morton
2007-12-29 16:02   ` Valdis.Kletnieks
2007-12-31 18:05 ` [PATCH -mm] crypto: scatterwalk.h needs sched.h Randy Dunlap
2007-12-31 22:31   ` Herbert Xu
2007-12-31 18:05 ` [PATCH -mm] driver core: build with SYSFS=n Randy Dunlap
2007-12-31 18:18 ` 2.6.24-rc6-mm1 (build problem: v4l / i2c) Randy Dunlap
2007-12-31 19:01   ` [v4l-dvb-maintainer] " Michael Krufky
2007-12-31 19:08     ` Michael Krufky
2007-12-31 18:18 ` 2.6.24-rc6-mm1 (build problem: gpio_keys) Randy Dunlap
2007-12-31 18:40   ` David Brownell
2007-12-31 19:10     ` [PATCH -mm] gpio: fix x86 build problem: gpio_keys Randy Dunlap
2008-01-01 15:32       ` Ingo Molnar
2007-12-31 18:19 ` 2.6.24-rc6-mm1 (build problem: gpio/W1) Randy Dunlap
2008-01-05 15:29   ` Evgeniy Polyakov
2008-01-05 16:16     ` Ville Syrjälä
2008-01-05 17:18       ` Randy Dunlap
2007-12-31 20:11 ` 2.6.24-rc6-mm1 (driver core/sysfs) Randy Dunlap
2008-01-12  1:05   ` Greg KH
2008-01-14 16:11     ` [patch] auto-qa Kconfig Ingo Molnar
2008-01-15 22:13       ` Pavel Machek
2008-01-06 10:03 ` 2.6.24-rc6-mm1: sparc64: undefined reference to `vmemmap_table' Mariusz Kozlowski
2008-01-06 10:15   ` Andrew Morton
2008-01-07  1:18     ` David Miller
2008-01-07 13:50 ` [PATCH -mm/x86] revert i386: handle an initrd in highmem (Was Re: 2.6.24-rc6-mm1) Dhaval Giani
2008-01-07 13:53   ` Thomas Gleixner
2008-01-07 14:56     ` Ingo Molnar
2008-01-07 15:19       ` Dhaval Giani
2008-01-07 16:22       ` Randy Dunlap
2008-01-07 16:32         ` Dhaval Giani
2008-01-07 16:50         ` Thomas Gleixner
2008-01-07 22:15           ` Randy Dunlap
     [not found] <9DtBq-2jD-3@gated-at.bofh.it>
     [not found] ` <476EAF98.6040004@yahoo.fr>
     [not found]   ` <20071223121410.0d572e03.akpm@linux-foundation.org>
2007-12-24  1:25     ` 2.6.24-rc6-mm1 Herbert Xu
2007-12-30 13:10       ` 2.6.24-rc6-mm1 Ingo Molnar
2008-01-02 10:31         ` 2.6.24-rc6-mm1 Nick Piggin
2008-01-02 11:01           ` 2.6.24-rc6-mm1 Peter Zijlstra
2008-01-02 11:12             ` 2.6.24-rc6-mm1 Nick Piggin
2008-01-02 11:24               ` 2.6.24-rc6-mm1 Peter Zijlstra
2008-01-02 12:19                 ` 2.6.24-rc6-mm1 Ingo Molnar
2008-01-02 13:26                   ` 2.6.24-rc6-mm1 Alan Cox
2008-01-02 16:18                     ` 2.6.24-rc6-mm1 Ingo Molnar
2008-01-02 22:49                       ` 2.6.24-rc6-mm1 Alan Cox
2008-01-02 11:08           ` 2.6.24-rc6-mm1 Ingo Molnar

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).