From: Alexey Dobriyan <adobriyan@gmail.com>
To: akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 08/17] proc tty: switch synclink_gt to ->proc_fops
Date: Thu, 29 Jan 2009 20:51:26 +0300 [thread overview]
Message-ID: <20090129175126.GH21643@x200.localdomain> (raw)
In-Reply-To: <20090129174830.GA21643@x200.localdomain>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
---
drivers/char/synclink_gt.c | 74 ++++++++++++++++++++-----------------------
1 files changed, 34 insertions(+), 40 deletions(-)
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index f329f45..83c139a 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -60,6 +60,7 @@
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/mm.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
@@ -154,7 +155,6 @@ static void tx_hold(struct tty_struct *tty);
static void tx_release(struct tty_struct *tty);
static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
-static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
static int chars_in_buffer(struct tty_struct *tty);
static void throttle(struct tty_struct * tty);
static void unthrottle(struct tty_struct * tty);
@@ -1229,13 +1229,12 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
/*
* proc fs support
*/
-static inline int line_info(char *buf, struct slgt_info *info)
+static inline void line_info(struct seq_file *m, struct slgt_info *info)
{
char stat_buf[30];
- int ret;
unsigned long flags;
- ret = sprintf(buf, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
+ seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
info->device_name, info->phys_reg_addr,
info->irq_level, info->max_frame_size);
@@ -1260,75 +1259,70 @@ static inline int line_info(char *buf, struct slgt_info *info)
strcat(stat_buf, "|RI");
if (info->params.mode != MGSL_MODE_ASYNC) {
- ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
+ seq_printf(m, "\tHDLC txok:%d rxok:%d",
info->icount.txok, info->icount.rxok);
if (info->icount.txunder)
- ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
+ seq_printf(m, " txunder:%d", info->icount.txunder);
if (info->icount.txabort)
- ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
+ seq_printf(m, " txabort:%d", info->icount.txabort);
if (info->icount.rxshort)
- ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
+ seq_printf(m, " rxshort:%d", info->icount.rxshort);
if (info->icount.rxlong)
- ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
+ seq_printf(m, " rxlong:%d", info->icount.rxlong);
if (info->icount.rxover)
- ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
+ seq_printf(m, " rxover:%d", info->icount.rxover);
if (info->icount.rxcrc)
- ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
+ seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
} else {
- ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
+ seq_printf(m, "\tASYNC tx:%d rx:%d",
info->icount.tx, info->icount.rx);
if (info->icount.frame)
- ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
+ seq_printf(m, " fe:%d", info->icount.frame);
if (info->icount.parity)
- ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
+ seq_printf(m, " pe:%d", info->icount.parity);
if (info->icount.brk)
- ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
+ seq_printf(m, " brk:%d", info->icount.brk);
if (info->icount.overrun)
- ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
+ seq_printf(m, " oe:%d", info->icount.overrun);
}
/* Append serial signal status to end */
- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
+ seq_printf(m, " %s\n", stat_buf+1);
- ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
+ seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
info->tx_active,info->bh_requested,info->bh_running,
info->pending_bh);
-
- return ret;
}
/* Called to print information about devices
*/
-static int read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+static int synclink_gt_proc_show(struct seq_file *m, void *v)
{
- int len = 0, l;
- off_t begin = 0;
struct slgt_info *info;
- len += sprintf(page, "synclink_gt driver\n");
+ seq_puts(m, "synclink_gt driver\n");
info = slgt_device_list;
while( info ) {
- l = line_info(page + len, info);
- len += l;
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ line_info(m, info);
info = info->next_device;
}
+ return 0;
+}
- *eof = 1;
-done:
- if (off >= len+begin)
- return 0;
- *start = page + (off-begin);
- return ((count < begin+len-off) ? count : begin+len-off);
+static int synclink_gt_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, synclink_gt_proc_show, NULL);
}
+static const struct file_operations synclink_gt_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = synclink_gt_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*
* return count of bytes in transmit buffer
*/
@@ -3558,13 +3552,13 @@ static const struct tty_operations ops = {
.send_xchar = send_xchar,
.break_ctl = set_break,
.wait_until_sent = wait_until_sent,
- .read_proc = read_proc,
.set_termios = set_termios,
.stop = tx_hold,
.start = tx_release,
.hangup = hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
+ .proc_fops = &synclink_gt_proc_fops,
};
static void slgt_cleanup(void)
--
1.5.6.5
next prev parent reply other threads:[~2009-01-29 17:46 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-29 17:48 [PATCH 01/17] proc tty: add struct tty_operations::proc_fops Alexey Dobriyan
2009-01-29 17:49 ` [PATCH 02/17] proc tty: switch cyclades to ->proc_fops Alexey Dobriyan
2009-01-29 17:49 ` [PATCH 03/17] proc tty: switch ip2 " Alexey Dobriyan
2009-01-29 17:49 ` [PATCH 04/17] proc tty: switch istallion " Alexey Dobriyan
2009-01-29 17:50 ` [PATCH 05/17] proc tty: switch synclink_cs " Alexey Dobriyan
2009-01-29 17:50 ` [PATCH 06/17] proc tty: switch stallion " Alexey Dobriyan
2009-01-29 17:50 ` [PATCH 07/17] proc tty: switch synclink " Alexey Dobriyan
2009-01-29 17:51 ` Alexey Dobriyan [this message]
2009-01-29 17:51 ` [PATCH 09/17] proc tty: switch synclinkmp " Alexey Dobriyan
2009-01-29 17:53 ` [PATCH 10/17] proc tty: switch sdio_uart " Alexey Dobriyan
2009-01-29 17:53 ` [PATCH 11/17] proc tty: switch serial_core " Alexey Dobriyan
2009-01-29 17:54 ` [PATCH 12/17] proc tty: switch usb-serial " Alexey Dobriyan
2009-01-29 17:54 ` [PATCH 13/17] proc tty: switch ircomm " Alexey Dobriyan
2009-01-29 17:54 ` [PATCH 14/17] proc tty: switch amiserial " Alexey Dobriyan
2009-01-29 17:55 ` [PATCH 15/17] proc tty: switch ia64 simserial " Alexey Dobriyan
2009-01-29 17:55 ` [PATCH 16/17] proc tty: switch xtensa iss console " Alexey Dobriyan
2009-01-29 17:55 ` [PATCH 17/17] proc tty: remove struct tty_operations::read_proc Alexey Dobriyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090129175126.GH21643@x200.localdomain \
--to=adobriyan@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).