From: Alexey Dobriyan <adobriyan@gmail.com>
To: akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 11/17] proc tty: switch serial_core to ->proc_fops
Date: Thu, 29 Jan 2009 20:53:39 +0300 [thread overview]
Message-ID: <20090129175339.GK21643@x200.localdomain> (raw)
In-Reply-To: <20090129174830.GA21643@x200.localdomain>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
---
drivers/serial/serial_core.c | 76 ++++++++++++++++++++----------------------
1 files changed, 36 insertions(+), 40 deletions(-)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 42f4e66..bf3c0e3 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -27,6 +27,8 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/console.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/serial_core.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
@@ -1682,20 +1684,20 @@ static const char *uart_type(struct uart_port *port)
#ifdef CONFIG_PROC_FS
-static int uart_line_info(char *buf, struct uart_driver *drv, int i)
+static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
{
struct uart_state *state = drv->state + i;
int pm_state;
struct uart_port *port = state->port;
char stat_buf[32];
unsigned int status;
- int mmio, ret;
+ int mmio;
if (!port)
- return 0;
+ return;
mmio = port->iotype >= UPIO_MEM;
- ret = sprintf(buf, "%d: uart:%s %s%08llX irq:%d",
+ seq_printf(m, "%d: uart:%s %s%08llX irq:%d",
port->line, uart_type(port),
mmio ? "mmio:0x" : "port:",
mmio ? (unsigned long long)port->mapbase
@@ -1703,8 +1705,8 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
port->irq);
if (port->type == PORT_UNKNOWN) {
- strcat(buf, "\n");
- return ret + 1;
+ seq_putc(m, '\n');
+ return;
}
if (capable(CAP_SYS_ADMIN)) {
@@ -1719,19 +1721,19 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
uart_change_pm(state, pm_state);
mutex_unlock(&state->mutex);
- ret += sprintf(buf + ret, " tx:%d rx:%d",
+ seq_printf(m, " tx:%d rx:%d",
port->icount.tx, port->icount.rx);
if (port->icount.frame)
- ret += sprintf(buf + ret, " fe:%d",
+ seq_printf(m, " fe:%d",
port->icount.frame);
if (port->icount.parity)
- ret += sprintf(buf + ret, " pe:%d",
+ seq_printf(m, " pe:%d",
port->icount.parity);
if (port->icount.brk)
- ret += sprintf(buf + ret, " brk:%d",
+ seq_printf(m, " brk:%d",
port->icount.brk);
if (port->icount.overrun)
- ret += sprintf(buf + ret, " oe:%d",
+ seq_printf(m, " oe:%d",
port->icount.overrun);
#define INFOBIT(bit, str) \
@@ -1753,45 +1755,39 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
STATBIT(TIOCM_RNG, "|RI");
if (stat_buf[0])
stat_buf[0] = ' ';
- strcat(stat_buf, "\n");
- ret += sprintf(buf + ret, stat_buf);
- } else {
- strcat(buf, "\n");
- ret++;
+ seq_puts(m, stat_buf);
}
+ seq_putc(m, '\n');
#undef STATBIT
#undef INFOBIT
- return ret;
}
-static int uart_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int uart_proc_show(struct seq_file *m, void *v)
{
- struct tty_driver *ttydrv = data;
+ struct tty_driver *ttydrv = v;
struct uart_driver *drv = ttydrv->driver_state;
- int i, len = 0, l;
- off_t begin = 0;
+ int i;
- len += sprintf(page, "serinfo:1.0 driver%s%s revision:%s\n",
+ seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n",
"", "", "");
- for (i = 0; i < drv->nr && len < PAGE_SIZE - 96; i++) {
- l = uart_line_info(page + len, drv, i);
- len += l;
- if (len + begin > off + count)
- goto done;
- if (len + begin < off) {
- begin += len;
- len = 0;
- }
- }
- *eof = 1;
- done:
- if (off >= len + begin)
- return 0;
- *start = page + (off - begin);
- return (count < begin + len - off) ? count : (begin + len - off);
+ for (i = 0; i < drv->nr; i++)
+ uart_line_info(m, drv, i);
+ return 0;
}
+
+static int uart_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, uart_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations uart_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = uart_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
#endif
#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
@@ -2299,7 +2295,7 @@ static const struct tty_operations uart_ops = {
.break_ctl = uart_break_ctl,
.wait_until_sent= uart_wait_until_sent,
#ifdef CONFIG_PROC_FS
- .read_proc = uart_read_proc,
+ .proc_fops = &uart_proc_fops,
#endif
.tiocmget = uart_tiocmget,
.tiocmset = uart_tiocmset,
--
1.5.6.5
next prev parent reply other threads:[~2009-01-29 17:48 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-29 17:48 [PATCH 01/17] proc tty: add struct tty_operations::proc_fops Alexey Dobriyan
2009-01-29 17:49 ` [PATCH 02/17] proc tty: switch cyclades to ->proc_fops Alexey Dobriyan
2009-01-29 17:49 ` [PATCH 03/17] proc tty: switch ip2 " Alexey Dobriyan
2009-01-29 17:49 ` [PATCH 04/17] proc tty: switch istallion " Alexey Dobriyan
2009-01-29 17:50 ` [PATCH 05/17] proc tty: switch synclink_cs " Alexey Dobriyan
2009-01-29 17:50 ` [PATCH 06/17] proc tty: switch stallion " Alexey Dobriyan
2009-01-29 17:50 ` [PATCH 07/17] proc tty: switch synclink " Alexey Dobriyan
2009-01-29 17:51 ` [PATCH 08/17] proc tty: switch synclink_gt " Alexey Dobriyan
2009-01-29 17:51 ` [PATCH 09/17] proc tty: switch synclinkmp " Alexey Dobriyan
2009-01-29 17:53 ` [PATCH 10/17] proc tty: switch sdio_uart " Alexey Dobriyan
2009-01-29 17:53 ` Alexey Dobriyan [this message]
2009-01-29 17:54 ` [PATCH 12/17] proc tty: switch usb-serial " Alexey Dobriyan
2009-01-29 17:54 ` [PATCH 13/17] proc tty: switch ircomm " Alexey Dobriyan
2009-01-29 17:54 ` [PATCH 14/17] proc tty: switch amiserial " Alexey Dobriyan
2009-01-29 17:55 ` [PATCH 15/17] proc tty: switch ia64 simserial " Alexey Dobriyan
2009-01-29 17:55 ` [PATCH 16/17] proc tty: switch xtensa iss console " Alexey Dobriyan
2009-01-29 17:55 ` [PATCH 17/17] proc tty: remove struct tty_operations::read_proc Alexey Dobriyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090129175339.GK21643@x200.localdomain \
--to=adobriyan@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).