[PATCH RT 0/4] [ANNOUNCE] 3.0.14-rt32-rc1

[PATCH RT 0/4] [ANNOUNCE] 3.0.14-rt32-rc1

[Steven Rostedt]

[-- Attachment #1: Type: text/plain, Size: 1673 bytes --]


Dear RT Folks,

This is the RT stable review cycle of patch 3.0.14-rt32-rc1.

Please scream at me if I messed something up. Please test the patches too.

The -rc release will be uploaded to kernel.org and will be deleted when
the final release is out. This is just a review release (or release candidate).

The pre-releases will not be pushed to the git repository, only the
final release is.

If all goes well, this patch will be converted to the next main release
on 1/20/2012.

Enjoy,

-- Steve


To build 3.0.14-rt32-rc1 directly, the following patches should be applied:

  http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.tar.xz

  http://www.kernel.org/pub/linux/kernel/v3.0/patch-3.0.14.xz

  http://www.kernel.org/pub/linux/kernel/projects/rt/3.0/patch-3.0.14-rt32-rc1.patch.xz

You can also build from 3.0.14-rt31 by applying the incremental patch:

http://www.kernel.org/pub/linux/kernel/projects/rt/3.0/incr/patch-3.0.14-rt31-rt32-rc1.patch.xz


Changes from 3.0.14-rt31:

---


Steven Rostedt (1):
      Linux 3.0.14-rt32-rc1

Thomas Gleixner (3):
      sched: ttwu: Return success when only changing the saved_state value
      wait-simple: Simple waitqueue implementation
      acpi-gpe-use-wait-simple.patch

----
 drivers/acpi/ec.c           |    8 +-
 drivers/acpi/internal.h     |    4 +-
 include/linux/wait-simple.h |  152 +++++++++++++++++++++++++++++++++++++++++++
 kernel/Makefile             |    2 +-
 kernel/sched.c              |    4 +-
 kernel/wait-simple.c        |   62 +++++++++++++++++
 localversion-rt             |    2 +-
 7 files changed, 226 insertions(+), 8 deletions(-)

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH RT 1/4] sched: ttwu: Return success when only changing the saved_state value

[Steven Rostedt]

[-- Attachment #1: Type: text/plain, Size: 1200 bytes --]

From: Thomas Gleixner <tglx@linutronix.de>

When a task blocks on a rt lock, it saves the current state in
p->saved_state, so a lock related wake up will not destroy the
original state.

When a real wakeup happens, while the task is running due to a lock
wakeup already, we update p->saved_state to TASK_RUNNING, but we do
not return success, which might cause another wakeup in the waitqueue
code and the task remains in the waitqueue list. Return success in
that case as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 kernel/sched.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index 63aeba0..e5ef7a8 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2693,8 +2693,10 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
 		 * if the wakeup condition is true.
 		 */
 		if (!(wake_flags & WF_LOCK_SLEEPER)) {
-			if (p->saved_state & state)
+			if (p->saved_state & state) {
 				p->saved_state = TASK_RUNNING;
+				success = 1;
+			}
 		}
 		goto out;
 	}
-- 
1.7.8.3



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH RT 2/4] wait-simple: Simple waitqueue implementation

[Steven Rostedt]

[-- Attachment #1: Type: text/plain, Size: 7396 bytes --]

From: Thomas Gleixner <tglx@linutronix.de>

wait_queue is a swiss army knife and in most of the cases the
complexity is not needed. For RT waitqueues are a constant source of
trouble as we can't convert the head lock to a raw spinlock due to
fancy and long lasting callbacks.

Provide a slim version, which allows RT to replace wait queues. This
should go mainline as well, as it lowers memory consumption and
runtime overhead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 include/linux/wait-simple.h |  152 +++++++++++++++++++++++++++++++++++++++++++
 kernel/Makefile             |    2 +-
 kernel/wait-simple.c        |   62 +++++++++++++++++
 3 files changed, 215 insertions(+), 1 deletions(-)
 create mode 100644 include/linux/wait-simple.h
 create mode 100644 kernel/wait-simple.c

diff --git a/include/linux/wait-simple.h b/include/linux/wait-simple.h
new file mode 100644
index 0000000..de69d8a
--- /dev/null
+++ b/include/linux/wait-simple.h
@@ -0,0 +1,152 @@
+#ifndef _LINUX_WAIT_SIMPLE_H
+#define _LINUX_WAIT_SIMPLE_H
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#include <asm/current.h>
+
+struct swaiter {
+	struct task_struct	*task;
+	struct list_head	node;
+};
+
+#define DEFINE_SWAITER(name)					\
+	struct swaiter name = {					\
+		.task	= current,				\
+		.node	= LIST_HEAD_INIT((name).node),		\
+	}
+
+struct swait_head {
+	raw_spinlock_t		lock;
+	struct list_head	list;
+};
+
+#define DEFINE_SWAIT_HEAD(name)					\
+	struct swait_head name = {				\
+		.lock	= __RAW_SPIN_LOCK_UNLOCKED(name.lock),	\
+		.list	= LIST_HEAD_INIT((name).list),		\
+	}
+
+extern void __init_swait_head(struct swait_head *h, struct lock_class_key *key);
+
+#define init_swait_head(swh)					\
+	do {							\
+		static struct lock_class_key __key;		\
+								\
+		__init_swait_head((swh), &__key);		\
+	} while (0)
+
+/*
+ * Waiter functions
+ */
+static inline bool swaiter_enqueued(struct swaiter *w)
+{
+	return w->task != NULL;
+}
+
+extern void swait_prepare(struct swait_head *head, struct swaiter *w, int state);
+extern void swait_finish(struct swait_head *head, struct swaiter *w);
+
+/*
+ * Adds w to head->list. Must be called with head->lock locked.
+ */
+static inline void __swait_enqueue(struct swait_head *head, struct swaiter *w)
+{
+	list_add(&w->node, &head->list);
+}
+
+/*
+ * Removes w from head->list. Must be called with head->lock locked.
+ */
+static inline void __swait_dequeue(struct swaiter *w)
+{
+	list_del_init(&w->node);
+}
+
+/*
+ * Wakeup functions
+ */
+extern void __swait_wake(struct swait_head *head, unsigned int state);
+
+static inline void swait_wake(struct swait_head *head)
+{
+	__swait_wake(head, TASK_NORMAL);
+}
+
+/*
+ * Event API
+ */
+
+#define __swait_event(wq, condition)					\
+do {									\
+	DEFINE_SWAITER(__wait);						\
+									\
+	for (;;) {							\
+		swait_prepare(&wq, &__wait, TASK_UNINTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		schedule();						\
+	}								\
+	swait_finish(&wq, &__wait);					\
+} while (0)
+
+/**
+ * swait_event - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
+ * @condition evaluates to true. The @condition is checked each time
+ * the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ */
+#define swait_event(wq, condition)					\
+do {									\
+	if (condition)							\
+		break;							\
+	__swait_event(wq, condition);					\
+} while (0)
+
+#define __swait_event_timeout(wq, condition, ret)			\
+do {									\
+	DEFINE_SWAITER(__wait);						\
+									\
+	for (;;) {							\
+		swait_prepare(&wq, &__wait, TASK_UNINTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		ret = schedule_timeout(ret);				\
+		if (!ret)						\
+			break;						\
+	}								\
+	swait_finish(&wq, &__wait);					\
+} while (0)
+
+/**
+ * swait_event_timeout - sleep until a condition gets true or a timeout elapses
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ * @timeout: timeout, in jiffies
+ *
+ * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
+ * @condition evaluates to true. The @condition is checked each time
+ * the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function returns 0 if the @timeout elapsed, and the remaining
+ * jiffies if the condition evaluated to true before the timeout elapsed.
+ */
+#define swait_event_timeout(wq, condition, timeout)			\
+({									\
+	long __ret = timeout;						\
+	if (!(condition))						\
+		__swait_event_timeout(wq, condition, __ret);		\
+	__ret;								\
+})
+
+#endif
diff --git a/kernel/Makefile b/kernel/Makefile
index 11949f1..6a9558b 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -10,7 +10,7 @@ obj-y     = sched.o fork.o exec_domain.o panic.o printk.o \
 	    kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o \
 	    hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \
 	    notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \
-	    async.o range.o jump_label.o
+	    async.o range.o wait-simple.o jump_label.o
 obj-y += groups.o
 
 ifdef CONFIG_FUNCTION_TRACER
diff --git a/kernel/wait-simple.c b/kernel/wait-simple.c
new file mode 100644
index 0000000..7f1cb72
--- /dev/null
+++ b/kernel/wait-simple.c
@@ -0,0 +1,62 @@
+/*
+ * Simple waitqueues without fancy flags and callbacks
+ *
+ * (C) 2011 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Based on kernel/wait.c
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/wait-simple.h>
+
+void __init_swait_head(struct swait_head *head, struct lock_class_key *key)
+{
+	raw_spin_lock_init(&head->lock);
+	lockdep_set_class(&head->lock, key);
+	INIT_LIST_HEAD(&head->list);
+}
+EXPORT_SYMBOL_GPL(__init_swait_head);
+
+void swait_prepare(struct swait_head *head, struct swaiter *w, int state)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&head->lock, flags);
+	w->task = current;
+	__swait_enqueue(head, w);
+	set_current_state(state);
+	raw_spin_unlock_irqrestore(&head->lock, flags);
+}
+EXPORT_SYMBOL_GPL(swait_prepare);
+
+void swait_finish(struct swait_head *head, struct swaiter *w)
+{
+	unsigned long flags;
+
+	__set_current_state(TASK_RUNNING);
+	if (w->task) {
+		raw_spin_lock_irqsave(&head->lock, flags);
+		__swait_dequeue(w);
+		raw_spin_unlock_irqrestore(&head->lock, flags);
+	}
+}
+EXPORT_SYMBOL_GPL(swait_finish);
+
+void __swait_wake(struct swait_head *head, unsigned int state)
+{
+	struct swaiter *curr, *next;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&head->lock, flags);
+
+	list_for_each_entry_safe(curr, next, &head->list, node) {
+		if (wake_up_state(curr->task, state)) {
+			__swait_dequeue(curr);
+			curr->task = NULL;
+		}
+	}
+
+	raw_spin_unlock_irqrestore(&head->lock, flags);
+}
-- 
1.7.8.3



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH RT 3/4] acpi-gpe-use-wait-simple.patch

[Steven Rostedt]

[-- Attachment #1: Type: text/plain, Size: 2394 bytes --]

From: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 drivers/acpi/ec.c       |    8 ++++----
 drivers/acpi/internal.h |    4 +++-
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 5812e01..db0e6c3 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -222,7 +222,7 @@ static int ec_poll(struct acpi_ec *ec)
 				if (ec_transaction_done(ec))
 					return 0;
 			} else {
-				if (wait_event_timeout(ec->wait,
+				if (swait_event_timeout(ec->wait,
 						ec_transaction_done(ec),
 						msecs_to_jiffies(1)))
 					return 0;
@@ -272,7 +272,7 @@ static int ec_wait_ibf0(struct acpi_ec *ec)
 	unsigned long delay = jiffies + msecs_to_jiffies(ec_delay);
 	/* interrupt wait manually if GPE mode is not active */
 	while (time_before(jiffies, delay))
-		if (wait_event_timeout(ec->wait, ec_check_ibf0(ec),
+		if (swait_event_timeout(ec->wait, ec_check_ibf0(ec),
 					msecs_to_jiffies(1)))
 			return 0;
 	return -ETIME;
@@ -612,7 +612,7 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device,
 	advance_transaction(ec, acpi_ec_read_status(ec));
 	if (ec_transaction_done(ec) &&
 	    (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
-		wake_up(&ec->wait);
+		swait_wake(&ec->wait);
 		ec_check_sci(ec, acpi_ec_read_status(ec));
 	}
 	return ACPI_INTERRUPT_HANDLED | ACPI_REENABLE_GPE;
@@ -676,7 +676,7 @@ static struct acpi_ec *make_acpi_ec(void)
 		return NULL;
 	ec->flags = 1 << EC_FLAGS_QUERY_PENDING;
 	mutex_init(&ec->lock);
-	init_waitqueue_head(&ec->wait);
+	init_swait_head(&ec->wait);
 	INIT_LIST_HEAD(&ec->list);
 	raw_spin_lock_init(&ec->curr_lock);
 	return ec;
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 68ed95f..2519b6e 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -23,6 +23,8 @@
 
 #define PREFIX "ACPI: "
 
+#include <linux/wait-simple.h>
+
 int init_acpi_device_notify(void);
 int acpi_scan_init(void);
 int acpi_sysfs_init(void);
@@ -59,7 +61,7 @@ struct acpi_ec {
 	unsigned long global_lock;
 	unsigned long flags;
 	struct mutex lock;
-	wait_queue_head_t wait;
+	struct swait_head wait;
 	struct list_head list;
 	struct transaction *curr;
 	raw_spinlock_t curr_lock;
-- 
1.7.8.3



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH RT 4/4] Linux 3.0.14-rt32-rc1

[Steven Rostedt]

[-- Attachment #1: Type: text/plain, Size: 308 bytes --]

From: Steven Rostedt <srostedt@redhat.com>

---
 localversion-rt |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/localversion-rt b/localversion-rt
index a68b433..2744705 100644
--- a/localversion-rt
+++ b/localversion-rt
@@ -1 +1 @@
--rt31
+-rt32-rc1
-- 
1.7.8.3



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH RT 0/4] [ANNOUNCE] 3.0.14-rt32-rc1

[Steven Rostedt]

On Tue, 2012-01-17 at 22:45 -0500, Steven Rostedt wrote:
> Dear RT Folks,
> 
> This is the RT stable review cycle of patch 3.0.14-rt32-rc1.
> 

Note, I know that mainline is at 3.0.17, but I want to test these
patches first before I merge in the stable tree.

After this is released, I'll make a 3.0.17-rt33 (or 3.0.18-rt33 if that
appears first ;-)

-- Steve

Re: [PATCH RT 2/4] wait-simple: Simple waitqueue implementation

[Mike Galbraith]

Greetings,

On Tue, 2012-01-17 at 22:45 -0500, Steven Rostedt wrote:

> diff --git a/kernel/wait-simple.c b/kernel/wait-simple.c
> new file mode 100644
> index 0000000..7f1cb72
> --- /dev/null
> +++ b/kernel/wait-simple.c
> @@ -0,0 +1,62 @@
> +/*
> + * Simple waitqueues without fancy flags and callbacks
> + *
> + * (C) 2011 Thomas Gleixner <tglx@linutronix.de>
> + *
> + * Based on kernel/wait.c
> + *
> + * For licencing details see kernel-base/COPYING
> + */
> +#include <linux/init.h>
> +#include <linux/sched.h>
> +#include <linux/wait-simple.h>
> +
> +void __init_swait_head(struct swait_head *head, struct lock_class_key *key)
> +{
> +	raw_spin_lock_init(&head->lock);
> +	lockdep_set_class(&head->lock, key);
> +	INIT_LIST_HEAD(&head->list);
> +}
> +EXPORT_SYMBOL_GPL(__init_swait_head);

#include <linux/module.h> ?

	-Mike

Re: [PATCH RT 2/4] wait-simple: Simple waitqueue implementation

[Steven Rostedt]

On Wed, 2012-01-18 at 10:28 +0100, Mike Galbraith wrote:
> > +
> > +void __init_swait_head(struct swait_head *head, struct lock_class_key *key)
> > +{
> > +	raw_spin_lock_init(&head->lock);
> > +	lockdep_set_class(&head->lock, key);
> > +	INIT_LIST_HEAD(&head->list);
> > +}
> > +EXPORT_SYMBOL_GPL(__init_swait_head);
> 
> #include <linux/module.h> ?

Did it fail to compile for you?  The 3.2 version included linux/export.h
which didn't exist, and that failed the compile for me. I removed it an
it compiled fine. But perhaps I should have replaced it with module.h.
I'll look into it.

Thanks!

-- Steve

Re: [PATCH RT 2/4] wait-simple: Simple waitqueue implementation

[Mike Galbraith]

On Wed, 2012-01-18 at 07:45 -0500, Steven Rostedt wrote:
> On Wed, 2012-01-18 at 10:28 +0100, Mike Galbraith wrote:
> > > +
> > > +void __init_swait_head(struct swait_head *head, struct lock_class_key *key)
> > > +{
> > > +	raw_spin_lock_init(&head->lock);
> > > +	lockdep_set_class(&head->lock, key);
> > > +	INIT_LIST_HEAD(&head->list);
> > > +}
> > > +EXPORT_SYMBOL_GPL(__init_swait_head);
> > 
> > #include <linux/module.h> ?
> 
> Did it fail to compile for you?  The 3.2 version included linux/export.h
> which didn't exist, and that failed the compile for me. I removed it an
> it compiled fine. But perhaps I should have replaced it with module.h.
> I'll look into it.

I saw compiler warning go zinging by, stopped the build and added the
include.  Trying to use the posted patches doesn't work without digging
out the signature damage, so it was easier to make my own.. and I too
just spanked the non-existent include :)

	-Mike 

Re: [PATCH RT 0/4] [ANNOUNCE] 3.0.14-rt32-rc1

[Tim Sander]

Hi Steve
> This is the RT stable review cycle of patch 3.0.14-rt32-rc1.
> 
> Please scream at me if I messed something up. Please test the patches too.
Well the error i described in other mails to this list are still persistent:
* ksoftirq running wild due to fec ethernet tx interrupt.

Does patch nr 2 possibly fix the error reboot fails with "Unable to execute 
shutdown: Bad address". The error occurs not to often so it is hard to say if 
this 3.0.14-rt32 is still showing this error.

Best regards
Tim

Hottinger Baldwin Messtechnik GmbH, Im Tiefen See 45, 64293 Darmstadt, Germany | www.hbm.com 

Registered as GmbH (German limited liability corporation) in the commercial register at the local court of Darmstadt, HRB 1147  
Company domiciled in Darmstadt | CEO: Andreas Huellhorst | Chairman of the board: James Charles Webster

Als Gesellschaft mit beschraenkter Haftung eingetragen im Handelsregister des Amtsgerichts Darmstadt unter HRB 1147 
Sitz der Gesellschaft: Darmstadt | Geschaeftsfuehrung: Andreas Huellhorst | Aufsichtsratsvorsitzender: James Charles Webster

The information in this email is confidential. It is intended solely for the addressee. If you are not the intended recipient, please let me know and delete this email.

Die in dieser E-Mail enthaltene Information ist vertraulich und lediglich für den Empfaenger bestimmt. Sollten Sie nicht der eigentliche Empfaenger sein, informieren Sie mich bitte kurz und loeschen diese E-Mail.

Re: [PATCH RT 2/4] wait-simple: Simple waitqueue implementation

[Steven Rostedt]

On Wed, 2012-01-18 at 14:40 +0100, Mike Galbraith wrote:

> I saw compiler warning go zinging by, stopped the build and added the

Thanks, I didn't look for warnings. I'll add the module.h.

> include.  Trying to use the posted patches doesn't work without digging
> out the signature damage, so it was easier to make my own.. and I too

Hmm, I'll stop posting these with gpg sigs.

-- Steve

> just spanked the non-existent include :)

Re: [PATCH RT 0/4] [ANNOUNCE] 3.0.14-rt32-rc1

[Steven Rostedt]

On Wed, 2012-01-18 at 14:50 +0100, Tim Sander wrote:
> Hi Steve
> > This is the RT stable review cycle of patch 3.0.14-rt32-rc1.
> > 
> > Please scream at me if I messed something up. Please test the patches too.
> Well the error i described in other mails to this list are still persistent:
> * ksoftirq running wild due to fec ethernet tx interrupt.
> 

I would be surprised if it went away, as none of these patches would
have touched that code.

> Does patch nr 2 possibly fix the error reboot fails with "Unable to execute 
> shutdown: Bad address". The error occurs not to often so it is hard to say if 
> this 3.0.14-rt32 is still showing this error.

Honestly I don't know about that error. But wait queues have been a
thorn in -rt for a while, and this patch fixes a few areas I'm sure.
That being one of them, I guess you'll find out if you see the bug
again ;-)

-- Steve

Re: [PATCH RT 0/4] [ANNOUNCE] 3.0.14-rt32-rc1

[Tim Sander]

Hi Steve

I haven't found the time to test the newer release but i still have some 
feedback for the "older" stuff.
> > > This is the RT stable review cycle of patch 3.0.14-rt32-rc1.
> > > 
> > > Please scream at me if I messed something up. Please test the patches
> > > too.
> > Well the error i described in other mails to this list are still
> > persistent: * ksoftirq running wild due to fec ethernet tx interrupt.
> 
> I would be surprised if it went away, as none of these patches would
> have touched that code.
> 
> > Does patch nr 2 possibly fix the error reboot fails with "Unable to
> > execute shutdown: Bad address". The error occurs not to often so it is
> > hard to say if this 3.0.14-rt32 is still showing this error.
> 
> Honestly I don't know about that error. But wait queues have been a
> thorn in -rt for a while, and this patch fixes a few areas I'm sure.
> That being one of them, I guess you'll find out if you see the bug
> again ;-)
Well i just found out, the error is still present :-(. The process start of 
reboot sometimes just fails with a "Bad address" error. I think this behaviour 
is there in all 3.0.x-rt releases. This is on arm i.xm35 pcm42 platform. I 
currently have no Idea where this error comes from but i would be happy for 
any input. I suspect that this error is happening with other processes than 
reboot. I suspect that failing konqueror ssh client sessions with "fish://" 
also are failing due to this error. Unfortunatly no hard evidence for this.

Best regards
Tim

Hottinger Baldwin Messtechnik GmbH, Im Tiefen See 45, 64293 Darmstadt, Germany | www.hbm.com 

Registered as GmbH (German limited liability corporation) in the commercial register at the local court of Darmstadt, HRB 1147  
Company domiciled in Darmstadt | CEO: Andreas Huellhorst | Chairman of the board: James Charles Webster

Als Gesellschaft mit beschraenkter Haftung eingetragen im Handelsregister des Amtsgerichts Darmstadt unter HRB 1147 
Sitz der Gesellschaft: Darmstadt | Geschaeftsfuehrung: Andreas Huellhorst | Aufsichtsratsvorsitzender: James Charles Webster

The information in this email is confidential. It is intended solely for the addressee. If you are not the intended recipient, please let me know and delete this email.

Die in dieser E-Mail enthaltene Information ist vertraulich und lediglich für den Empfaenger bestimmt. Sollten Sie nicht der eigentliche Empfaenger sein, informieren Sie mich bitte kurz und loeschen diese E-Mail.